SYMBOL INDEX (110 symbols across 80 files)

FILE: arduino_firmware/robotArm_v0.31/RampsStepper.h
  function class (line 4) | class RampsStepper {

FILE: arduino_firmware/robotArm_v0.31/byj_gripper.h
  function class (line 5) | class BYJ_Gripper {

FILE: arduino_firmware/robotArm_v0.31/command.cpp
  function Cmd (line 86) | Cmd Command::getCmd() const {
  function cmdMove (line 110) | void cmdMove(Cmd(&cmd), Point pos, Point pos_offset, bool isRelativeCoord){
  function cmdDwell (line 125) | void cmdDwell(Cmd(&cmd)){
  function printErr (line 129) | void printErr() {

FILE: arduino_firmware/robotArm_v0.31/command.h
  type Cmd (line 7) | struct Cmd {

FILE: arduino_firmware/robotArm_v0.31/endstop.h
  function class (line 4) | class Endstop {

FILE: arduino_firmware/robotArm_v0.31/equipment.h
  function class (line 4) | class Equipment {

FILE: arduino_firmware/robotArm_v0.31/fanControl.h
  function class (line 4) | class FanControl {

FILE: arduino_firmware/robotArm_v0.31/interpolation.cpp
  function Point (line 30) | Point Interpolation::getPosOffset() const {
  function Point (line 212) | Point Interpolation::getPosmm() const {

FILE: arduino_firmware/robotArm_v0.31/interpolation.h
  type Point (line 10) | struct Point {
  function class (line 16) | class Interpolation {

FILE: arduino_firmware/robotArm_v0.31/logger.h
  function class (line 10) | class Logger {

FILE: arduino_firmware/robotArm_v0.31/queue.h
  function isFull (line 10) | bool isFull() const;

FILE: arduino_firmware/robotArm_v0.31/robotGeometry.h
  function class (line 4) | class RobotGeometry {

FILE: arduino_firmware/robotArm_v0.41/RampsStepper.h
  function class (line 4) | class RampsStepper {

FILE: arduino_firmware/robotArm_v0.41/byj_gripper.h
  function class (line 5) | class BYJ_Gripper {

FILE: arduino_firmware/robotArm_v0.41/command.cpp
  function Cmd (line 86) | Cmd Command::getCmd() const {
  function cmdMove (line 110) | void cmdMove(Cmd(&cmd), Point pos, Point pos_offset, bool isRelativeCoord){
  function cmdDwell (line 125) | void cmdDwell(Cmd(&cmd)){
  function printErr (line 129) | void printErr() {

FILE: arduino_firmware/robotArm_v0.41/command.h
  type Cmd (line 7) | struct Cmd {

FILE: arduino_firmware/robotArm_v0.41/endstop.h
  function class (line 4) | class Endstop {

FILE: arduino_firmware/robotArm_v0.41/equipment.h
  function class (line 4) | class Equipment {

FILE: arduino_firmware/robotArm_v0.41/fanControl.h
  function class (line 4) | class FanControl {

FILE: arduino_firmware/robotArm_v0.41/interpolation.cpp
  function Point (line 30) | Point Interpolation::getPosOffset() const {
  function Point (line 212) | Point Interpolation::getPosmm() const {

FILE: arduino_firmware/robotArm_v0.41/interpolation.h
  type Point (line 10) | struct Point {
  function class (line 16) | class Interpolation {

FILE: arduino_firmware/robotArm_v0.41/logger.h
  function class (line 10) | class Logger {

FILE: arduino_firmware/robotArm_v0.41/queue.h
  function isFull (line 10) | bool isFull() const;

FILE: arduino_firmware/robotArm_v0.41/robotGeometry.h
  function class (line 4) | class RobotGeometry {

FILE: arduino_firmware/robotArm_v0.51/RampsStepper.h
  function class (line 4) | class RampsStepper {

FILE: arduino_firmware/robotArm_v0.51/byj_gripper.h
  function class (line 5) | class BYJ_Gripper {

FILE: arduino_firmware/robotArm_v0.51/command.cpp
  function Cmd (line 86) | Cmd Command::getCmd() const {
  function cmdMove (line 110) | void cmdMove(Cmd(&cmd), Point pos, Point pos_offset, bool isRelativeCoord){
  function cmdDwell (line 125) | void cmdDwell(Cmd(&cmd)){
  function printErr (line 129) | void printErr() {

FILE: arduino_firmware/robotArm_v0.51/command.h
  type Cmd (line 7) | struct Cmd {

FILE: arduino_firmware/robotArm_v0.51/endstop.h
  function class (line 4) | class Endstop {

FILE: arduino_firmware/robotArm_v0.51/equipment.h
  function class (line 4) | class Equipment {

FILE: arduino_firmware/robotArm_v0.51/fanControl.h
  function class (line 4) | class FanControl {

FILE: arduino_firmware/robotArm_v0.51/interpolation.cpp
  function Point (line 30) | Point Interpolation::getPosOffset() const {
  function Point (line 212) | Point Interpolation::getPosmm() const {

FILE: arduino_firmware/robotArm_v0.51/interpolation.h
  type Point (line 10) | struct Point {
  function class (line 16) | class Interpolation {

FILE: arduino_firmware/robotArm_v0.51/logger.h
  function class (line 10) | class Logger {

FILE: arduino_firmware/robotArm_v0.51/queue.h
  function isFull (line 10) | bool isFull() const;

FILE: arduino_firmware/robotArm_v0.51/robotGeometry.h
  function class (line 4) | class RobotGeometry {

FILE: arduino_firmware/robotArm_v0.51/servo_gripper.h
  function class (line 5) | class Servo_Gripper{

FILE: arduino_firmware/robotArm_v0.61/RampsStepper.h
  function class (line 4) | class RampsStepper {

FILE: arduino_firmware/robotArm_v0.61/byj_gripper.h
  function class (line 5) | class BYJ_Gripper {

FILE: arduino_firmware/robotArm_v0.61/command.cpp
  function Cmd (line 87) | Cmd Command::getCmd() const {
  function cmdMove (line 111) | void cmdMove(Cmd(&cmd), Point pos, Point pos_offset, bool isRelativeCoord){
  function cmdDwell (line 126) | void cmdDwell(Cmd(&cmd)){
  function printErr (line 130) | void printErr() {

FILE: arduino_firmware/robotArm_v0.61/command.h
  type Cmd (line 7) | struct Cmd {

FILE: arduino_firmware/robotArm_v0.61/endstop.h
  function class (line 4) | class Endstop {

FILE: arduino_firmware/robotArm_v0.61/equipment.h
  function class (line 4) | class Equipment {

FILE: arduino_firmware/robotArm_v0.61/fanControl.h
  function class (line 4) | class FanControl {

FILE: arduino_firmware/robotArm_v0.61/interpolation.cpp
  function Point (line 30) | Point Interpolation::getPosOffset() const {
  function Point (line 212) | Point Interpolation::getPosmm() const {

FILE: arduino_firmware/robotArm_v0.61/interpolation.h
  type Point (line 10) | struct Point {
  function class (line 16) | class Interpolation {

FILE: arduino_firmware/robotArm_v0.61/logger.h
  function class (line 10) | class Logger {

FILE: arduino_firmware/robotArm_v0.61/queue.h
  function isFull (line 10) | bool isFull() const;

FILE: arduino_firmware/robotArm_v0.61/robotGeometry.h
  function class (line 4) | class RobotGeometry {

FILE: arduino_firmware/robotArm_v0.61/servo_gripper.h
  function class (line 5) | class Servo_Gripper{

FILE: arduino_firmware/robotArm_v0.71/RampsStepper.h
  function class (line 4) | class RampsStepper {

FILE: arduino_firmware/robotArm_v0.71/byj_gripper.h
  function class (line 5) | class BYJ_Gripper {

FILE: arduino_firmware/robotArm_v0.71/command.cpp
  function Cmd (line 86) | Cmd Command::getCmd() const {
  function cmdMove (line 110) | void cmdMove(Cmd(&cmd), Point pos, Point pos_offset, bool isRelativeCoord){
  function cmdDwell (line 125) | void cmdDwell(Cmd(&cmd)){
  function printErr (line 129) | void printErr() {

FILE: arduino_firmware/robotArm_v0.71/command.h
  type Cmd (line 7) | struct Cmd {

FILE: arduino_firmware/robotArm_v0.71/controller_ps4.h
  function class (line 8) | class Controller_PS4 {

FILE: arduino_firmware/robotArm_v0.71/endstop.h
  function class (line 4) | class Endstop {

FILE: arduino_firmware/robotArm_v0.71/equipment.h
  function class (line 4) | class Equipment {

FILE: arduino_firmware/robotArm_v0.71/fanControl.h
  function class (line 4) | class FanControl {

FILE: arduino_firmware/robotArm_v0.71/interpolation.cpp
  function Point (line 35) | Point Interpolation::getPosOffset() const {
  function Point (line 217) | Point Interpolation::getPosmm() const {

FILE: arduino_firmware/robotArm_v0.71/interpolation.h
  type Point (line 10) | struct Point {
  function class (line 16) | class Interpolation {

FILE: arduino_firmware/robotArm_v0.71/logger.h
  function class (line 10) | class Logger {

FILE: arduino_firmware/robotArm_v0.71/queue.h
  function isFull (line 10) | bool isFull() const;

FILE: arduino_firmware/robotArm_v0.71/robotGeometry.h
  function class (line 4) | class RobotGeometry {

FILE: arduino_firmware/robotArm_v0.71/servo_gripper.h
  function class (line 12) | class Servo_Gripper{

FILE: arduino_firmware/robotArm_v0.81/RampsStepper.h
  function class (line 4) | class RampsStepper {

FILE: arduino_firmware/robotArm_v0.81/byj_gripper.h
  function class (line 5) | class BYJ_Gripper {

FILE: arduino_firmware/robotArm_v0.81/command.cpp
  function Cmd (line 86) | Cmd Command::getCmd() const {
  function cmdMove (line 110) | void cmdMove(Cmd(&cmd), Point pos, Point pos_offset, bool isRelativeCoord){
  function cmdDwell (line 125) | void cmdDwell(Cmd(&cmd)){
  function printErr (line 129) | void printErr() {

FILE: arduino_firmware/robotArm_v0.81/command.h
  type Cmd (line 7) | struct Cmd {

FILE: arduino_firmware/robotArm_v0.81/controller_ps4.h
  function class (line 32) | class Controller_PS4 {

FILE: arduino_firmware/robotArm_v0.81/controller_wiimote.h
  function class (line 22) | class Controller_Wiimote {

FILE: arduino_firmware/robotArm_v0.81/endstop.h
  function class (line 4) | class Endstop {

FILE: arduino_firmware/robotArm_v0.81/equipment.h
  function class (line 4) | class Equipment {

FILE: arduino_firmware/robotArm_v0.81/fanControl.h
  function class (line 4) | class FanControl {

FILE: arduino_firmware/robotArm_v0.81/interpolation.cpp
  function Point (line 35) | Point Interpolation::getPosOffset() const {
  function Point (line 217) | Point Interpolation::getPosmm() const {

FILE: arduino_firmware/robotArm_v0.81/interpolation.h
  type Point (line 10) | struct Point {
  function class (line 16) | class Interpolation {

FILE: arduino_firmware/robotArm_v0.81/logger.h
  function class (line 10) | class Logger {

FILE: arduino_firmware/robotArm_v0.81/queue.h
  function isFull (line 10) | bool isFull() const;

FILE: arduino_firmware/robotArm_v0.81/robotGeometry.h
  function class (line 4) | class RobotGeometry {

FILE: arduino_firmware/robotArm_v0.81/servo_gripper.h
  function class (line 12) | class Servo_Gripper{

FILE: temp_codes/consecutive_command.py
  function wait_complete (line 32) | def wait_complete():