[ { "path": "LICENSE", "content": "MIT License\n\nCopyright (c) 2022 Arthur Jordan\n\nPermission is hereby granted, free of charge, to any person obtaining a copy\nof this software and associated documentation files (the \"Software\"), to deal\nin the Software without restriction, including without limitation the rights\nto use, copy, modify, merge, publish, distribute, sublicense, and/or sell\ncopies of the Software, and to permit persons to whom the Software is\nfurnished to do so, subject to the following conditions:\n\nThe above copyright notice and this permission notice shall be included in all\ncopies or substantial portions of the Software.\n\nTHE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\nIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\nFITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\nAUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\nLIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\nOUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\nSOFTWARE.\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/BLEfunctions.ino", "content": "void setupBLE(void){\r\n//----------------BLE INIT--------------------------\r\n // Setup the BLE LED to be enabled on CONNECT\r\n // Note: This is actually the default behaviour, but provided\r\n // here in case you want to control this LED manually via PIN 19\r\n //Bluefruit.autoConnLed(true);\r\n\r\n // Config the peripheral connection with maximum bandwidth\r\n // more SRAM required by SoftDevice\r\n // Note: All config***() function must be called before begin()\r\n Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);\r\n\r\n Bluefruit.begin();\r\n Bluefruit.setTxPower(4); // Check bluefruit.h for supported values\r\n Bluefruit.setName(\"LORA Communicator\");\r\n //Bluefruit.setName(getMcuUniqueID()); // useful testing with multiple central connections\r\n Bluefruit.Periph.setConnectCallback(connect_callback);\r\n Bluefruit.Periph.setDisconnectCallback(disconnect_callback);\r\n\r\n // To be consistent OTA DFU should be added first if it exists\r\n bledfu.begin();\r\n\r\n // Configure and Start Device Information Service\r\n bledis.setManufacturer(\"Kauz\");\r\n bledis.setModel(\"LORA QWERTY V1\");\r\n bledis.begin();\r\n\r\n // Configure and Start BLE Uart Service\r\n bleuart.begin();\r\n\r\n // Start BLE Battery Service\r\n blebas.begin();\r\n blebas.write(100);\r\n\r\n // Set up and start advertising\r\n startAdv();\r\n \r\n}\r\n\r\n// callback invoked when central connects\r\nvoid connect_callback(uint16_t conn_handle)\r\n{\r\n // Get the reference to current connection\r\n BLEConnection* connection = Bluefruit.Connection(conn_handle);\r\n\r\n char central_name[32] = { 0 };\r\n connection->getPeerName(central_name, sizeof(central_name));\r\n digitalWrite(LED_BUILTIN, HIGH);\r\n display.setCursor(0, 95);\r\n display.print(\"BT\");\r\n display.refresh();\r\n Serial.print(\"Connected to \");\r\n Serial.println(central_name);\r\n}\r\n\r\n/**\r\n Callback invoked when a connection is dropped\r\n @param conn_handle connection where this event happens\r\n @param reason is a BLE_HCI_STATUS_CODE which can be found in ble_hci.h\r\n*/\r\nvoid disconnect_callback(uint16_t conn_handle, uint8_t reason)\r\n{\r\n (void) conn_handle;\r\n (void) reason;\r\n digitalWrite(LED_BUILTIN, LOW);\r\n display.setCursor(0, 95);\r\n display.print(\" \");\r\n display.refresh();\r\n Serial.println();\r\n Serial.print(\"Disconnected, reason = 0x\"); Serial.println(reason, HEX);\r\n}\r\n\r\nvoid startAdv(void)\r\n{\r\n // Advertising packet\r\n Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);\r\n Bluefruit.Advertising.addTxPower();\r\n\r\n // Include bleuart 128-bit uuid\r\n Bluefruit.Advertising.addService(bleuart);\r\n\r\n // Secondary Scan Response packet (optional)\r\n // Since there is no room for 'Name' in Advertising packet\r\n Bluefruit.ScanResponse.addName();\r\n\r\n /* Start Advertising\r\n - Enable auto advertising if disconnected\r\n - Interval: fast mode = 20 ms, slow mode = 152.5 ms\r\n - Timeout for fast mode is 30 seconds\r\n - Start(timeout) with timeout = 0 will advertise forever (until connected)\r\n\r\n For recommended advertising interval\r\n https://developer.apple.com/library/content/qa/qa1931/_index.html\r\n */\r\n Bluefruit.Advertising.restartOnDisconnect(true);\r\n Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms\r\n Bluefruit.Advertising.setFastTimeout(30); // number of seconds in fast mode\r\n Bluefruit.Advertising.start(0); // 0 = Don't stop advertising after n seconds\r\n\r\n //printBatteryStats();\r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/LORA_Messenger.ino", "content": "/*********************************************************************\r\n Code Base for the ultimate LORA QWERTY COMMUNICATOR project\r\n The Feather nRF52840 bootloader was installed (the device uses the same button an the same 2 LEDs)\r\n However, the variant.h and variant.cpp files of the feather board have been heavily modified.\r\n The pin numbering now just goes from 0 to 47 (P0.00 to P1.15) which is much easier to work with.\r\n\r\n Already working:\r\n -LS027B7DH01 400x240 memory LCD\r\n -Blackberry Q10 keyboard with backlight\r\n -BLE Stuff\r\n -BQ27441 Lithium Fuel Gauge\r\n -Buzzer\r\n -vibration motor\r\n -SX1262 TX and RX\r\n -BME280\r\n -DS3231M RTC\r\n -MPU9250 9-DOF IMU (hardware bug had to be corrected - switched I2C address to 0x69, else it collides with the DS3231 (0x68))\r\n -GD25Q16CE QSPI flash (works with mass storage TinyUSB test sketch)\r\n -GPS via tinyGPSPlus\r\n \r\n ToDo:\r\n -SD card - \r\n \r\n*********************************************************************/\r\n#include \r\n#include // for Serial\r\n#include \r\n#include \r\n#include \r\n#include \r\n#include \r\n#include \r\n#include \r\n#include \"SparkFunBME280.h\"\r\n#include //Written by Arnd / https://www.github.com/SV-Zanshin\r\n//#include \"MPU9250.h\"\r\n#include \r\n#define MPU9250_ADDR 0x69 //changed it because the DS3231M also has 0x68!!\r\n#include \r\n\r\n#include \r\n#include \r\n#include \r\n#include \r\n//display.setFont(&FreeSans12pt7b);\r\n#define BLACK 0\r\n#define WHITE 1\r\n#define TIME_ZONE 2 //what you need to add to UTC time\r\n\r\n//#define SPI_MISO 15\r\n//#define SPI_MOSI 13\r\n//#define SPI_SCK 14\r\n//Q10 keyboard defines\r\n#define col1 16\r\n#define col2 33\r\n#define col3 17\r\n#define col4 39\r\n#define col5 24\r\n\r\n#define row1 22\r\n#define row2 35\r\n#define row3 37\r\n#define row4 20\r\n#define row5 46\r\n#define row6 44\r\n#define row7 45\r\n//PIN defines\r\n#define IMU_INT 9\r\n#define RTC_INT 40\r\n#define PIN_BUZZER 31\r\n#define GPS_ON 43 //LOW means on\r\n#define MOT 25 //HIGH means ON\r\n#define K_BLT 19 //HIGH means ON\r\n#define DISP_CS 27\r\n#define DISP_DISP 11\r\n#define BTN 34 \r\n#define SD_CS 32\r\n#define SD_DET 10\r\n\r\n#define DIO1 (28)\r\n#define DIO2 (8)\r\n#define TXEN (6)\r\n#define RXEN (26)\r\n#define L_SS (4)\r\n#define BUSY (29)\r\n#define L_RST (30)\r\n\r\n//-------------------menue variables-------------------\r\n//in order to add a new app you have to:\r\n//add the name to appNames String array, take care of the order\r\n//create a boolean \"insideFuncXXX\"\r\n//add a \"case\" in the appropriate order to void ok_callback(void) ISR\r\n//add an if statement with function call in loop()\r\n//create the app function inside a new .ino file (\"add new tab\") ideally named appFuncXXX (easier to find)\r\n//in the sketch folder with the following structure:\r\n/*\r\n void funcXXX(){\r\n //start sequence\r\n //display Stuff, initialize....\r\n display.clearDisplay();\r\n\r\n display.setTextSize(3); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setCursor(5, 0);\r\n display.setTextColor(LCD_COLOR_WHITE);\r\n display.println(\"funcXXX\");\r\n display.refresh();\r\n while (insideSubMenue) { //the back button terminates the loop\r\n //loop of the APP\r\n readKeyboard();\r\n readWASD();\r\n // ...\r\n delay(100); //get some sleep else the app hangs!\r\n }\r\n insideFuncXXX=false;\r\n displayMenue(menueIndex);\r\n }\r\n*/\r\n//note: since the project structure is based on freeRTOS and is callback-driven, not all app code is inside this app function\r\n//for example the button callbacks and bluetooth functions have to be adapted\r\nunsigned long prevStepCount = 0;\r\nbyte menueIndex = 0;\r\nString appNames [] = {\"LORA Chat\",\"GPS\",\"Sensor Data\",\"BLE Sensors\", \"Settings\"}; //enter your app names in correct order\r\n#define NUMITEMS(arg) ((unsigned int) (sizeof (arg) / sizeof (arg [0]))) // number of items in an array\r\nbyte maxMenueIndex = NUMITEMS(appNames) - 1; //the actual nuber of apps minus one\r\nboolean insideLORAchat = false;\r\nboolean insideGPS = false;\r\nboolean insideSensorData = false;\r\nboolean insideSettings = false;\r\nboolean insideBLEsensors = false;\r\n//------------------------------------------------------\r\nboolean booting, insideMenue, insideSubMenue, centralConnected, peripheralConnected, charging, notificationHere = false;\r\nboolean inMotion = false;\r\nString notificationString = \"\";\r\n//booleans for WASD navigation. They are changed in readKeyboard() and call the dn_callback etc.\r\nboolean nav_up=0;\r\nboolean nav_dn = 0;\r\nboolean nav_right=0;\r\nboolean nav_left=0;\r\nboolean enter = 0;\r\nboolean alt_for_wasd = 0;\r\n\r\nint minorHalfSize; // 1/2 of lesser of display width or height\r\nconst uint8_t SPRINTF_BUFFER_SIZE {32}; ///< Buffer size for sprintf() (RTC stuff)\r\n//unsigned int year, month, day, hour, minute,second; // Variables to hold parsed date/time\r\n\r\n\r\n// Set BATTERY_CAPACITY to the design capacity of your battery.\r\nconst unsigned int BATTERY_CAPACITY = 1100; //\r\nunsigned int soc = 0;\r\n// flag to indicate that a packet was received\r\nvolatile bool receivedFlag = false;\r\nunsigned long bltTimeout = 0;\r\nboolean incomingMsg = false;\r\nboolean ledState=false;\r\n// disable interrupt when it's not needed\r\nvolatile bool enableInterrupt = true;\r\n\r\n//KEYBOARD STUFF\r\nchar buf[6][21];\r\nshort int pos = 0;\r\nchar oldchr = 0;\r\nbyte shiftlock = 0; // set/unset by pressing shift and letting it go rather than using it as a modifier for another key\r\nbyte shiftlockchanged = 0; // helper\r\nunsigned long time = 0; // keypad repetition interval\r\nbyte displaychanged = 1;\r\nbyte curline = 0;\r\n\r\n//create instances of the components\r\nAdafruit_SharpMem display(&SPI, DISP_CS, 400, 240);\r\nSX1262 lora = new Module(L_SS, DIO1, -1, BUSY);\r\nBME280 bme280; //address is set to 0x76\r\nDS3231M_Class DS3231M;\r\n//MPU9250 mpu;\r\nMPU9250_WE myMPU9250 = MPU9250_WE(MPU9250_ADDR);\r\n// The TinyGPSPlus object\r\nTinyGPSPlus gps; \r\n\r\n// BLE Service\r\nBLEDfu bledfu; // OTA DFU service\r\nBLEDis bledis; // device information\r\nBLEUart bleuart; // uart over ble\r\nBLEBas blebas; // battery\r\n\r\nSoftwareTimer screenUpdateTimer;\r\n\r\n// *******************************************************SETUP*****************************************************************\r\nvoid setup(void)\r\n{\r\n Serial.begin(9600);\r\n delay(3000);\r\n Serial.println(\"Hello!\");\r\n Serial1.begin(9600); //hardware UART for GPS\r\n //----------------INIT all the I2C sensors--------------------------\r\n setupBQ27441(); //WTF, Serial and the fuel gauge has to be initialized prior to the pins....\r\n soc = lipo.soc(); // Read state-of-charge (%)\r\n delay(100);\r\n setupBME_RTC_IMU();\r\n \r\n //KEYBOARD STUFF \r\n // initialize our 8 lines of text\r\n for (int i = 0; i < 8; i++) buf[i][0] = 0;\r\n\r\n setupPins();\r\n\r\n setupLORA();\r\n\r\n //----------------DISPLAY INIT--------------------------\r\n // start & clear the display\r\n display.begin();\r\n display.clearDisplay();\r\n // Several shapes are drawn centered on the screen. Calculate 1/2 of\r\n // lesser of display width or height, this is used repeatedly later.\r\n minorHalfSize = min(display.width(), display.height()) / 2;\r\n\r\n //test display\r\n testdrawchar();\r\n display.refresh();\r\n delay(1000);\r\n display.clearDisplay();\r\n\r\n //----------------TESTS--------------------------\r\n /*\r\nnotificationAlarm();\r\n */\r\n \r\n //------------------------------SOFTWARE TIMERS-----------------------------------\r\n // Configure the timer with 1000 ms interval, with our callback\r\n screenUpdateTimer.begin(1000, screenUpdateTimer_callback);\r\n\r\n // Start the timer\r\n screenUpdateTimer.start();\r\n\r\n setupBLE();\r\n\r\n Serial.println(\"Position you MPU9250 flat and don't move it - calibrating...\");\r\n delay(1000);\r\n myMPU9250.autoOffsets();\r\n Serial.println(\"Done!\");\r\n myMPU9250.setSampleRateDivider(5);\r\n myMPU9250.setAccRange(MPU9250_ACC_RANGE_2G);\r\n myMPU9250.enableAccDLPF(true);\r\n myMPU9250.setAccDLPF(MPU9250_DLPF_6); \r\n\r\n\r\n}\r\n\r\n// *******************************************************LOOP*****************************************************************\r\nvoid loop(void)\r\n{\r\n //printBatteryStats();\r\n //keep display backlight on for some seconds after incoming message\r\n if ((millis() - bltTimeout) > 5000 && incomingMsg == true) {\r\n digitalWrite(K_BLT, LOW);\r\n incomingMsg = false;\r\n }\r\n\r\n //----------------send data from serial and BLE via LORA--------------------------\r\n // Forward data from HW Serial to BLEUART\r\n while (Serial.available())\r\n {\r\n // Delay to wait for enough input, since we have a limited transmission buffer\r\n delay(2);\r\n\r\n uint8_t buf[64];\r\n int count = Serial.readBytes(buf, sizeof(buf));\r\n bleuart.write( buf, count );\r\n }\r\n if (bleuart.available() > 0) {\r\n int BLEbytes = 0;\r\n uint8_t BLEbuf[64];\r\n // Forward from BLEUART to HW Serial\r\n while ( bleuart.available() )\r\n {\r\n uint8_t ch;\r\n ch = (uint8_t) bleuart.read();\r\n Serial.write(ch);\r\n BLEbuf[BLEbytes] = ch;\r\n BLEbytes++;\r\n }\r\n\r\n //now transmit via LORA\r\n prepareTX();\r\n Serial.print(F(\"[SX1262] Transmitting packet ... \"));\r\n\r\n // you can transmit C-string or Arduino string up to\r\n // 256 characters long\r\n // NOTE: transmit() is a blocking method!\r\n // See example SX126x_Transmit_Interrupt for details\r\n // on non-blocking transmission method.\r\n //int state = lora.transmit(\"Hello World!\");\r\n\r\n // you can also transmit byte array up to 256 bytes long\r\n int state = lora.transmit(BLEbuf, BLEbytes + 1);\r\n\r\n if (state == ERR_NONE) {\r\n // the packet was successfully transmitted\r\n Serial.println(F(\"success!\"));\r\n\r\n // print measured data rate\r\n Serial.print(F(\"[SX1262] Datarate:\\t\"));\r\n Serial.print(lora.getDataRate());\r\n Serial.println(F(\" bps\"));\r\n delay(200);\r\n prepareRX();\r\n } else if (state == ERR_PACKET_TOO_LONG) {\r\n // the supplied packet was longer than 256 bytes\r\n Serial.println(F(\"too long!\"));\r\n } else if (state == ERR_TX_TIMEOUT) {\r\n // timeout occured while transmitting packet\r\n Serial.println(F(\"timeout!\"));\r\n } else {\r\n // some other error occurred\r\n Serial.print(F(\"failed, code \"));\r\n Serial.println(state);\r\n }\r\n }\r\n //----------------LORA RECEIVE ROUTINE--------------------------\r\n // check if the flag is set\r\n if (receivedFlag) {\r\n // disable the interrupt service routine while\r\n // processing the data\r\n enableInterrupt = false;\r\n // reset flag\r\n receivedFlag = false;\r\n // you can read received data as an Arduino String\r\n String str;\r\n int state = lora.readData(str);\r\n // you can also read received data as byte array\r\n /*\r\n byte byteArr[8];\r\n int state = lora.readData(byteArr, 8);\r\n */\r\n if (state == ERR_NONE) {\r\n // packet was successfully received\r\n Serial.println(F(\"[SX1262] Received packet!\"));\r\n\r\n // print data of the packet\r\n Serial.print(F(\"[SX1262] Data:\\t\\t\"));\r\n Serial.println(str);\r\n bleuart.print(str); //send via BLE\r\n display.clearDisplay();\r\n // digitalWrite(K_BLT, HIGH);\r\n notificationAlarm();\r\n display.setFont(&FreeSans9pt7b);\r\ndisplay.clearDisplay();\r\n display.setTextColor(BLACK);\r\n //display.setTextSize(1);\r\n display.setCursor(10, 30);\r\n display.print(str);\r\n display.println(\" \");\r\n \r\n display.print(\"RSSI: \");\r\n display.print(lora.getRSSI());\r\n display.println(\" dBm \");\r\n display.print(\"SNR: \");\r\n display.print(lora.getSNR());\r\n display.println(\" dB \");\r\n display.refresh();\r\n bltTimeout = millis();\r\n incomingMsg = true;\r\n\r\n // print RSSI (Received Signal Strength Indicator)\r\n Serial.print(F(\"[SX1262] RSSI:\\t\\t\"));\r\n Serial.print(lora.getRSSI());\r\n Serial.println(F(\" dBm\"));\r\n // print SNR (Signal-to-Noise Ratio)\r\n Serial.print(F(\"[SX1262] SNR:\\t\\t\"));\r\n Serial.print(lora.getSNR());\r\n Serial.println(F(\" dB\"));\r\n \r\n } else if (state == ERR_CRC_MISMATCH) {\r\n // packet was received, but is malformed\r\n Serial.println(F(\"CRC error!\"));\r\n } else {\r\n // some other error occurred\r\n Serial.print(F(\"failed, code \"));\r\n Serial.println(state);\r\n }\r\n // put module back to listen mode\r\n lora.startReceive();\r\n // we're ready to receive more packets,\r\n // enable interrupt service routine\r\n enableInterrupt = true;\r\n }\r\n\r\n \r\n \r\n \r\n//----------------housekeeping --------------------------\r\n readKeyboard();\r\n readWASD();\r\n /*\r\n display.setCursor(10, 200);\r\n display.setTextColor(BLACK, WHITE);\r\n display.setTextSize(2);\r\n for (int i = 0; i < 6; i++)\r\n display.print(buf[i]);\r\n display.refresh();\r\n*/\r\n//----------------MENU STUFF ----------------\r\n\r\n \r\n\r\n if (insideLORAchat) {\r\n appLORAchat();\r\n }\r\n\r\n if (insideGPS) {\r\n appGPS();\r\n }\r\n\r\n if (insideSensorData) {\r\n appSensorData();\r\n }\r\n\r\n if (insideSettings) {\r\n appSettings();\r\n }\r\n\r\n if (insideBLEsensors) {\r\n appBLEsensors();\r\n }\r\n\r\n //refresh dislay approx. every minute. Not perfect, I know.\r\n// if (second() == 0)\r\n // if (!insideMenue) mainScreen();\r\n\r\n \r\n delay(100); //remember: delay=sleep in the nrf52 RTOS-based core\r\n}\r\n\r\n\r\n\r\n// *******************************************************FUNCTIONS*****************************************************************\r\n\r\n\r\n\r\nvoid btn_callback(void)\r\n{\r\n ledState=!ledState;\r\n digitalWrite(LED_BUILTIN, ledState);\r\n\r\n if (!insideMenue && !insideSubMenue) {\r\n insideMenue = true;\r\n menueIndex = 0;\r\n displayMenue(menueIndex);\r\n }\r\n}\r\n\r\nvoid screenUpdateTimer_callback(TimerHandle_t xTimerID)\r\n{\r\n // freeRTOS timer ID, ignored if not used\r\n (void) xTimerID;\r\n\r\n}\r\n\r\nvoid ok_callback(void)\r\n{\r\n\r\n //digitalToggle(BLT);\r\n if (insideMenue && !insideSubMenue) {\r\n insideSubMenue = true;\r\n switch (menueIndex) {\r\n case 0:\r\n //enter BLE scan function\r\n insideLORAchat = true;\r\n break;\r\n\r\n case 1:\r\n //Show data of connected BLE UART sensors\r\n insideGPS = true;\r\n break;\r\n\r\n case 2:\r\n insideSensorData = true;\r\n break;\r\n\r\n\r\n case 3:\r\n insideBLEsensors = true;\r\n break;\r\n\r\n \r\n case 4:\r\n insideSettings = true;\r\n break;\r\n\r\n case 5:\r\n /*\r\n clearBlack();\r\n display.setTextSize(2);\r\n display.setCursor(2, 70);\r\n display.setTextColor(WHITE);\r\n display.println(\"Shutdown...\");\r\n display.setTextColor(WHITE);\r\n display.println(\"press OK --->\");\r\n display.println(\"to turn on\");\r\n display.refresh();\r\n delay(3000); //some delay to make sure the device does not reboot again immediately\r\n clearBlack();\r\n display.refresh();\r\n shutdownSystem();\r\n */\r\n break;\r\n\r\n }\r\n } else if (!insideMenue && !insideSubMenue) {\r\n insideMenue = true;\r\n menueIndex = 0;\r\n displayMenue(menueIndex);\r\n }\r\n\r\n}\r\n\r\nvoid bck_callback(void)\r\n{\r\n\r\n //turnOff = true;\r\n //shutdownSystem();\r\n if (insideSubMenue) {\r\n insideSubMenue = false;\r\n displayMenue(menueIndex);\r\n } else if (insideMenue && !insideSubMenue) {\r\n insideMenue = false;\r\n mainScreen();\r\n } else {\r\n //what to do while in mainScreen\r\n }\r\n\r\n}\r\n\r\nvoid dn_callback(void)\r\n{\r\n //enterOTADfu();\r\n if (insideMenue && !insideSubMenue) {\r\n if (menueIndex >= maxMenueIndex) menueIndex = maxMenueIndex; else menueIndex++;\r\n displayMenue(menueIndex);\r\n } else if (insideSubMenue) {\r\n //it depends\r\n //if (insideGestRecFunc) {\r\n //this decides whether we record or recognize gestures\r\n // if (!recordGest) recordGest = true; else recordGest = false;\r\n\r\n // }\r\n } else {\r\n // digitalToggle(BLT);\r\n }\r\n\r\n}\r\nvoid up_callback(void)\r\n{\r\n if (insideMenue && !insideSubMenue) {\r\n if (menueIndex <= 0) menueIndex = 0; else menueIndex--;\r\n displayMenue(menueIndex);\r\n } else if (insideSubMenue) {\r\n //it depends\r\n\r\n } else {\r\n // notificationHere = false; //delete the notification window on the main screen.\r\n // notificationString = \"\";\r\n mainScreen();\r\n }\r\n}\r\n\r\nvoid readWASD(){\r\n \r\n if (nav_up) up_callback();\r\n if (nav_dn) dn_callback();\r\n if (nav_right) ok_callback();\r\n if (nav_left) bck_callback();\r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/appBLEsensors.ino", "content": "void appBLEsensors(){\r\n //start sequence\r\n //display Stuff, initialize....\r\n display.clearDisplay();\r\n display.setFont(&FreeSans18pt7b);\r\n\r\n //display.setTextSize(3); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setCursor(25, 30);\r\n display.setTextColor(BLACK);\r\n display.println(\"BLE Sensors\");\r\n display.refresh();\r\n while (insideSubMenue) { //the back button terminates the loop\r\n readKeyboard(); //navigate with \"WASD\"\r\n readWASD();\r\n //loop of the APP\r\n delay(100); //get some sleep else the app hangs!\r\n }\r\n insideBLEsensors=false;\r\n displayMenue(menueIndex);\r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/appGPS.ino", "content": "void appGPS() {\r\n //start sequence\r\n //display Stuff, initialize....\r\n digitalWrite(GPS_ON, LOW); //turn ON GPS\r\n display.clearDisplay();\r\n // display.setTextSize(3); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setFont(&FreeSans18pt7b);\r\n\r\n display.setCursor(25, 30);\r\n display.setTextColor(BLACK);\r\n display.println(\"GPS\");\r\n display.refresh();\r\n\r\n\r\n while (insideSubMenue) { //the back button terminates the loop\r\n readKeyboard(); //navigate with \"WASD\"\r\n readWASD();\r\n\r\n while (Serial1.available() > 0)\r\n if (gps.encode(Serial1.read()))\r\n displayInfo();\r\n\r\n //loop of the APP\r\n delay(100); //get some sleep else the app hangs!\r\n }\r\n digitalWrite(GPS_ON, HIGH); //turn OFF GPS\r\n insideGPS = false;\r\n displayMenue(menueIndex);\r\n}\r\n\r\n\r\n\r\nvoid displayInfo()\r\n{\r\n\r\n //display.setTextColor(BLACK, WHITE);\r\ndisplay.clearDisplay();\r\n\r\n if (gps.location.isValid())\r\n {\r\n // display.setTextSize(2); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setFont(&FreeSans12pt7b);\r\n\r\n display.setCursor(5, 50);\r\n display.print(\"LAT: \");\r\n display.print(gps.location.lat(), 6);\r\n display.print(\", LON: \");\r\n display.print(gps.location.lng(), 6);\r\n }\r\n else\r\n {\r\n //display.setTextSize(2); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setCursor(5, 50);\r\n display.print(\"LOC INVALID\");\r\n }\r\n\r\n\r\n if (gps.date.isValid())\r\n {\r\n //display.setTextSize(2); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setFont(&FreeSans12pt7b);\r\n\r\n display.setCursor(5, 70);\r\n display.print(gps.date.day());\r\n display.print(\".\");\r\n display.print(gps.date.month());\r\n display.print(\".\");\r\n display.print(gps.date.year());\r\n display.print(\" \"); //so the \"invalid\" line disappears\r\n }\r\n else\r\n {\r\n //display.setTextSize(2); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setFont(&FreeSans12pt7b);\r\n\r\n display.setCursor(5, 70);\r\n display.print(\"DATE INVALID\");\r\n }\r\n\r\n\r\n if (gps.time.isValid())\r\n {\r\n //display.setTextSize(2); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setFont(&FreeSans12pt7b);\r\n\r\n display.setCursor(5, 90);\r\n if (gps.time.hour() < 10) display.print(\"0\");\r\n display.print(gps.time.hour()+TIME_ZONE);\r\n display.print(\":\");\r\n if (gps.time.minute() < 10) display.print(\"0\");\r\n display.print(gps.time.minute());\r\n display.print(\":\");\r\n if (gps.time.second() < 10) display.print(\"0\");\r\n display.print(gps.time.second());\r\n display.print(\".\");\r\n if (gps.time.centisecond() < 10) display.print(\"0\");\r\n display.print(gps.time.centisecond());\r\n display.print(\" \");\r\n }\r\n else\r\n {\r\n //display.setTextSize(2); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setFont(&FreeSans12pt7b);\r\n\r\n display.setCursor(5, 90);\r\n display.print(\"TIME INVALID\");\r\n }\r\n\r\n display.refresh();\r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/appLORAchat.ino", "content": "void appLORAchat() {\r\n //start sequence\r\n //display Stuff, initialize....\r\n char loraBuf[126];\r\n\r\n display.clearDisplay();\r\n // display.setTextSize(3); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setFont(&FreeSans18pt7b);\r\n\r\n display.setCursor(25, 30);\r\n display.setTextColor(BLACK);\r\n display.println(\"LORA Chat\");\r\n display.refresh();\r\n while (insideSubMenue) { //the back button terminates the loop\r\n readKeyboard(); //navigate with \"WASD\"\r\n readWASD();\r\n\r\n display.setCursor(10, 200);\r\n display.setTextColor(BLACK);\r\n //display.setTextSize(2);\r\n display.setFont(&FreeSans12pt7b);\r\n\r\n for (int i = 0; i < 6; i++)\r\n display.print(buf[i]);\r\n display.refresh();\r\n\r\n //now transmit via LORA\r\n prepareTX();\r\n Serial.print(F(\"[SX1262] Transmitting packet ... \"));\r\n\r\n // you can transmit C-string or Arduino string up to\r\n // 256 characters long\r\n // NOTE: transmit() is a blocking method!\r\n // See example SX126x_Transmit_Interrupt for details\r\n // on non-blocking transmission method.\r\n //int state = lora.transmit(\"Hello World!\");\r\n\r\n if (enter) {\r\n uint8_t idx = 0;\r\n for (int i = 0; i < 6; i++) {\r\n for (int j = 0; j < 21; j++) {\r\n idx = (i + 1) * j;\r\n loraBuf[idx] = buf[i][j];\r\n }\r\n }\r\n // you can also transmit byte array up to 256 bytes long\r\n int state = lora.transmit(loraBuf, sizeof(loraBuf));\r\n\r\n enter = 0;\r\n memset(loraBuf, 0, sizeof(loraBuf)); //clear the array\r\n if (state == ERR_NONE) {\r\n // the packet was successfully transmitted\r\n Serial.println(F(\"success!\"));\r\n\r\n // print measured data rate\r\n Serial.print(F(\"[SX1262] Datarate:\\t\"));\r\n Serial.print(lora.getDataRate());\r\n Serial.println(F(\" bps\"));\r\n delay(200);\r\n prepareRX();\r\n } else if (state == ERR_PACKET_TOO_LONG) {\r\n // the supplied packet was longer than 256 bytes\r\n Serial.println(F(\"too long!\"));\r\n } else if (state == ERR_TX_TIMEOUT) {\r\n // timeout occured while transmitting packet\r\n Serial.println(F(\"timeout!\"));\r\n } else {\r\n // some other error occurred\r\n Serial.print(F(\"failed, code \"));\r\n Serial.println(state);\r\n }\r\n }\r\n\r\n\r\n\r\n\r\n\r\n\r\n //----------------LORA RECEIVE ROUTINE--------------------------\r\n // check if the flag is set\r\n if (receivedFlag) {\r\n // disable the interrupt service routine while\r\n // processing the data\r\n enableInterrupt = false;\r\n // reset flag\r\n receivedFlag = false;\r\n // you can read received data as an Arduino String\r\n String str;\r\n int state = lora.readData(str);\r\n // you can also read received data as byte array\r\n /*\r\n byte byteArr[8];\r\n int state = lora.readData(byteArr, 8);\r\n */\r\n if (state == ERR_NONE) {\r\n // packet was successfully received\r\n Serial.println(F(\"[SX1262] Received packet!\"));\r\n\r\n // print data of the packet\r\n Serial.print(F(\"[SX1262] Data:\\t\\t\"));\r\n Serial.println(str);\r\n // bleuart.print(str); //send via BLE\r\n display.clearDisplay();\r\n // digitalWrite(K_BLT, HIGH);\r\n notificationAlarm();\r\n display.setFont(&FreeSans9pt7b);\r\n display.clearDisplay();\r\n display.setTextColor(BLACK);\r\n //display.setTextSize(1);\r\n display.setCursor(10, 30);\r\n display.print(str);\r\n display.println(\" \");\r\n\r\n display.print(\"RSSI: \");\r\n display.print(lora.getRSSI());\r\n display.println(\" dBm \");\r\n display.print(\"SNR: \");\r\n display.print(lora.getSNR());\r\n display.println(\" dB \");\r\n display.refresh();\r\n bltTimeout = millis();\r\n incomingMsg = true;\r\n\r\n // print RSSI (Received Signal Strength Indicator)\r\n Serial.print(F(\"[SX1262] RSSI:\\t\\t\"));\r\n Serial.print(lora.getRSSI());\r\n Serial.println(F(\" dBm\"));\r\n // print SNR (Signal-to-Noise Ratio)\r\n Serial.print(F(\"[SX1262] SNR:\\t\\t\"));\r\n Serial.print(lora.getSNR());\r\n Serial.println(F(\" dB\"));\r\n\r\n } else if (state == ERR_CRC_MISMATCH) {\r\n // packet was received, but is malformed\r\n Serial.println(F(\"CRC error!\"));\r\n } else {\r\n // some other error occurred\r\n Serial.print(F(\"failed, code \"));\r\n Serial.println(state);\r\n }\r\n // put module back to listen mode\r\n lora.startReceive();\r\n // we're ready to receive more packets,\r\n // enable interrupt service routine\r\n enableInterrupt = true;\r\n }\r\n\r\n //loop of the APP\r\n delay(100); //get some sleep else the app hangs!\r\n }\r\n insideLORAchat = false;\r\n displayMenue(menueIndex);\r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/appSensorData.ino", "content": "void appSensorData() {\r\n //start sequence\r\n //display Stuff, initialize....\r\n display.clearDisplay();\r\n //display.setTextSize(3); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setFont(&FreeSans18pt7b);\r\n display.setCursor(25, 30);\r\n display.setTextColor(BLACK);\r\n display.println(\"Sensor Data\");\r\n display.refresh();\r\n while (insideSubMenue) { //the back button terminates the loop\r\n readKeyboard(); //navigate with \"WASD\"\r\n readWASD();\r\n //loop of the APP\r\ndisplay.clearDisplay();\r\n //----------------DRAWING AND MEASURING STUFF --------------------------\r\n unsigned int soc = lipo.soc();\r\n display.setTextColor(BLACK);\r\n //display.setTextSize(1);\r\n display.setFont(&FreeSans9pt7b);\r\n\r\n display.setCursor(330, 20);\r\n //display.print(\" \");\r\n //display.refresh();\r\n display.setCursor(330, 20);\r\n display.print(soc);\r\n display.print(\"% \");\r\n display.setCursor(330, 40);\r\n int current = lipo.current(AVG); // Read average current (mA)\r\n //display.print(\" \");\r\n //display.refresh();\r\n display.setCursor(330, 40);\r\n display.print(current);\r\n display.print(\"mA \");\r\n display.refresh();\r\n delay(5);\r\n unsigned int hum = bme280.readFloatHumidity();\r\n display.setCursor(330, 60);\r\n display.print(hum);\r\n display.print(\"% \");\r\n display.refresh();\r\n delay(5);\r\n DateTime now = DS3231M.now(); // get the current time from device\r\n // Use sprintf() to pretty print the date/time with leading zeros\r\n char output_buffer[SPRINTF_BUFFER_SIZE]; ///< Temporary buffer for sprintf()\r\n sprintf(output_buffer, \"%04d-%02d-%02d %02d:%02d:%02d\", now.year(), now.month(), now.day(),\r\n now.hour(), now.minute(), now.second());\r\n display.setCursor(10, 40);\r\n display.print(output_buffer);\r\n display.refresh();\r\n delay(5);\r\n\r\n xyzFloat angles = myMPU9250.getAngles();\r\n //mpu.update();\r\n display.setCursor(10, 60);\r\n // float roll = mpu.getRoll();\r\n display.print(angles.x);\r\n display.print(\" \");\r\n //float pitch = mpu.getPitch();\r\n display.print(angles.y);\r\n display.print(\" \");\r\n // float yaw = mpu.getYaw();\r\n display.print(angles.z);\r\n display.print(\" \");\r\n display.refresh();\r\n\r\n delay(400); //get some sleep else the app hangs!\r\n }\r\n insideSensorData = false;\r\n displayMenue(menueIndex);\r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/appSettings.ino", "content": "void appSettings(){\r\n //start sequence\r\n //display Stuff, initialize....\r\n display.clearDisplay();\r\n //display.setTextSize(3); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setFont(&FreeSans18pt7b);\r\n\r\n display.setCursor(25, 30);\r\n display.setTextColor(BLACK);\r\n display.println(\"Settings\");\r\n display.refresh();\r\n while (insideSubMenue) { //the back button terminates the loop\r\n readKeyboard(); //navigate with \"WASD\"\r\n readWASD();\r\n //loop of the APP\r\n delay(100); //get some sleep else the app hangs!\r\n }\r\n insideSettings=false;\r\n displayMenue(menueIndex);\r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/initFunctions.ino", "content": "void setupPins(void){\r\n // basically we are setting columns to High-Z outputs which we will enable one by one in our keyboard scan routine\r\n pinMode(col1, INPUT); // High-Z\r\n pinMode(col2, INPUT); // High-Z\r\n pinMode(col3, INPUT); // High-Z\r\n pinMode(col4, INPUT); // High-Z\r\n pinMode(col5, INPUT); // High-Z\r\n\r\n // Rows are inputs with pullups\r\n pinMode(row1, INPUT_PULLUP);\r\n pinMode(row2, INPUT_PULLUP);\r\n pinMode(row3, INPUT_PULLUP);\r\n pinMode(row4, INPUT_PULLUP);\r\n pinMode(row5, INPUT_PULLUP);\r\n pinMode(row6, INPUT_PULLUP);\r\n pinMode(row7, INPUT_PULLUP);\r\n\r\n pinMode(L_RST, OUTPUT);\r\n pinMode(TXEN, OUTPUT);\r\n pinMode(RXEN, OUTPUT);\r\n\r\n pinMode(BTN, INPUT_PULLUP);\r\n pinMode(RTC_INT, INPUT);\r\n pinMode(IMU_INT, INPUT);\r\n pinMode(DISP_DISP, OUTPUT);\r\n pinMode(K_BLT, OUTPUT);\r\n pinMode(MOT, OUTPUT);\r\n pinMode(GPS_ON, OUTPUT);\r\n\r\n attachInterrupt(BTN, btn_callback, ISR_DEFERRED | FALLING);\r\n\r\n digitalWrite(DISP_DISP, HIGH);\r\n digitalWrite(MOT, LOW);\r\n digitalWrite(K_BLT, LOW);\r\n digitalWrite(GPS_ON, HIGH); //HIGH means ON here\r\n}\r\n\r\n\r\nvoid setupBQ27441(void)\r\n{\r\n // Use lipo.begin() to initialize the BQ27441-G1A and confirm that it's\r\n // connected and communicating.\r\n if (!lipo.begin()) // begin() will return true if communication is successful\r\n {\r\n // If communication fails, print an error message and loop forever.\r\n Serial.println(\"Error: Unable to communicate with BQ27441.\");\r\n Serial.println(\" Check wiring and try again.\");\r\n Serial.println(\" (Battery must be plugged into Battery Babysitter!)\");\r\n //while (1) ;\r\n }\r\n Serial.println(\"Connected to BQ27441!\");\r\n\r\n // Uset lipo.setCapacity(BATTERY_CAPACITY) to set the design capacity\r\n // of your battery.\r\n lipo.setCapacity(BATTERY_CAPACITY);\r\n}\r\n\r\nvoid setupLORA(void) {\r\n\r\n //----------------LORA INIT--------------------------\r\n digitalWrite(L_RST, LOW);\r\n delay(100);\r\n digitalWrite(L_RST, HIGH);\r\n delay(100);\r\n //Wire.begin();\r\n prepareRX(); //switch RXEN and TXEN\r\n Serial.println(\"LORA BLE Relay and QWERTY communicator based on nRF52840 and SX1262\\n\");\r\n Serial.print(F(\"[SX1262] Initializing ... \"));\r\n // initialize SX1262\r\n // carrier frequency: 868.0 MHz\r\n // bandwidth: 125.0 kHz\r\n // spreading factor: 7\r\n // coding rate: 5\r\n // sync word: 0x1424 (private network)\r\n // output power: 22 dBm\r\n // current limit: 60 mA\r\n // preamble length: 8 symbols\r\n // CRC: enabled\r\n // int16_t begin(float freq = 434.0, float bw = 125.0, uint8_t sf = 9, uint8_t cr = 7,\r\n // uint8_t syncWord = SX126X_SYNC_WORD_PRIVATE, int8_t power = 14, float currentLimit = 60.0,\r\n // uint16_t preambleLength = 8, float tcxoVoltage = 1.6, bool useRegulatorLDO = false);\r\n int state = lora.begin(868.0, 125.0, 7, 5, 0x1424, 22, 100, 8, 2.4, 0);\r\n\r\n if (state == ERR_NONE) {\r\n Serial.println(F(\"lora init success!\"));\r\n } else {\r\n Serial.print(F(\"lora init failed, code \"));\r\n Serial.println(state);\r\n //while (true);\r\n }\r\n\r\n // eByte E22-900M22S uses DIO3 to supply the external TCXO\r\n if (lora.setTCXO(2.4) == ERR_INVALID_TCXO_VOLTAGE)\r\n {\r\n Serial.println(F(\"Selected TCXO voltage is invalid for this module!\"));\r\n }\r\n // set the function that will be called\r\n // when new packet is received\r\n lora.setDio1Action(setFlag);\r\n\r\n // start listening for LoRa packets\r\n Serial.print(F(\"[SX1262] Starting to listen ... \"));\r\n state = lora.startReceive();\r\n if (state == ERR_NONE) {\r\n Serial.println(F(\"success!\"));\r\n } else {\r\n Serial.print(F(\"failed, code \"));\r\n Serial.println(state);\r\n while (true);\r\n }\r\n}\r\n\r\nvoid setupBME_RTC_IMU(void) {\r\n if (bme280.beginI2C() == false) //Begin communication over I2C\r\n {\r\n Serial.println(\"The sensor did not respond. Please check wiring.\");\r\n while (1); //Freeze\r\n }\r\n delay(100);\r\n while (!DS3231M.begin()) // Initialize RTC communications\r\n {\r\n Serial.println(F(\"Unable to find DS3231MM. Dammit.\"));\r\n while (1); //Freeze\r\n }\r\n //DS3231M.pinSquareWave(); // Make INT/SQW pin toggle at 1Hz\r\n //DS3231M.adjust(DateTime(year, month, day, hour, minute, second)); // Set to library compile Date/Time\r\n\r\n // following line sets the RTC to the date & time this sketch was compiled\r\n DS3231M.adjust(DateTime(__DATE__, __TIME__));\r\n\r\n delay(1000);\r\n if (!myMPU9250.init()) {\r\n Serial.println(\"MPU9250 does not respond\");\r\n }\r\n else {\r\n Serial.println(\"MPU9250 is connected\");\r\n }\r\n\r\n delay(100);\r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/mainScreen.ino", "content": "void mainScreen() {\r\n if (!insideMenue) {\r\n display.clearDisplay();\r\n // display.setTextSize(3); //standard font is 5x8, so scale it by 3 ->15x24\r\n display.setFont(&FreeSans18pt7b);\r\n\r\n display.setCursor(25, 30);\r\n display.setTextColor(BLACK);\r\n display.println(\"Main Screen\");\r\n display.refresh();\r\n }\r\n\r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/menue.ino", "content": "void displayMenue(int itemIndex) {\r\n display.clearDisplay();\r\n display.setFont(&FreeSans18pt7b);\r\n\r\n //display.setTextSize(3);\r\n display.setCursor(25, 30);\r\n display.setTextColor(BLACK);\r\n display.println(\"Menu\");\r\n //display.setTextSize(2);\r\n display.setFont(&FreeSans12pt7b);\r\n\r\n for (int i = 0; i <= maxMenueIndex; i++) {\r\n readKeyboard(); //navigate with \"WASD\"\r\n\r\ndisplay.print(appNames[i]);\r\n\r\n if (i == itemIndex) {\r\n //highlight the selcted item (only possible with builtin basic font)\r\n //display.setTextColor(WHITE, BLACK);\r\n display.print(\"<--\"); //used as an arrow indicating the chosen item\r\n } else {\r\n //display.setTextColor(BLACK, WHITE);\r\n display.print(\" \");\r\n }\r\n display.println();\r\n }\r\n\r\n display.refresh();\r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/readKeyboard.ino", "content": "void readKeyboard(){\r\n //https://forum.arduino.cc/t/interfacing-blackberry-q10-keypad-to-arduino-and-the-oled-typewriter/342989\r\nbyte alt = 0; // flag for alt modifer key, unimplemented.\r\n byte sym = 0; // flag for symbol modifer key\r\n byte shift = 0; // flag for shift modifier key\r\n byte shl = 0; // left shift for shift lock detection\r\n byte shr = 0; // right shift for shift lock detection\r\n char chr = 0; // current character\r\n char symb = 0; // current symbol\r\nnav_up=0;\r\nnav_dn = 0;\r\nnav_right=0;\r\nnav_left=0;\r\nenter=0;\r\n\r\n // figure out the current scan code, if any, and any modifier keys, if any\r\n pinMode(col1, OUTPUT); \r\n digitalWrite(col1, LOW);\r\n delay(1);\r\n if (digitalRead(row1)==0) {chr = 'Q'; symb='#';}\r\n if (digitalRead(row2)==0) {chr = 'W'; symb='1'; nav_up=1; } //if (insideMenue) up_callback();\r\n if (digitalRead(row3)==0) {sym = 1;} // symbol modifier key\r\n if (digitalRead(row4)==0) {chr = 'A'; symb='*'; nav_left=1; } //if (insideMenue) bck_callback();\r\n if (digitalRead(row5)==0) {alt = 1; alt_for_wasd = !alt_for_wasd;} // alt modifier key - it enables different usage scenarios of the keyboard, f.e. wasd navigation\r\n if (digitalRead(row6)==0) {chr = ' '; symb=' ';}\r\n if (digitalRead(row7)==0) {chr = '~'; symb='0';}\r\n \r\n pinMode(col1, INPUT); \r\n pinMode(col2, OUTPUT); \r\n digitalWrite(col2, LOW);\r\n delay(1); //the nrf52840 needs those delays\r\n if (digitalRead(row1)==0) {chr = 'E'; symb='2';}\r\n if (digitalRead(row2)==0) {chr = 'S'; symb='4'; nav_dn=1;} //if (insideMenue) dn_callback();\r\n if (digitalRead(row3)==0) {chr = 'D'; symb='5'; nav_right=1;} //if (insideMenue) ok_callback();\r\n if (digitalRead(row4)==0) {chr = 'P'; symb='@';}\r\n if (digitalRead(row5)==0) {chr = 'X'; symb='8';}\r\n if (digitalRead(row6)==0) {chr = 'Z'; symb='7';}\r\n if (digitalRead(row7)==0) {shift = 1; shl = 1;} // shift modifier key\r\n \r\n pinMode(col2, INPUT); \r\n pinMode(col3, OUTPUT); \r\n digitalWrite(col3, LOW);\r\n delay(1);\r\n if (digitalRead(row1)==0) {chr = 'R'; symb='3';}\r\n if (digitalRead(row2)==0) {chr = 'G'; symb='/';}\r\n if (digitalRead(row3)==0) {chr = 'T'; symb='(';}\r\n if (digitalRead(row4)==0) {shift = 1; shr = 1;} // shift modifier key\r\n if (digitalRead(row5)==0) {chr = 'V'; symb='?';}\r\n if (digitalRead(row6)==0) {chr = 'C'; symb='9';}\r\n if (digitalRead(row7)==0) {chr = 'F'; symb='6';}\r\n \r\n pinMode(col3, INPUT); \r\n pinMode(col4, OUTPUT); \r\n digitalWrite(col4, LOW);\r\n delay(1);\r\n if (digitalRead(row1)==0) {chr = 'U'; symb='_';}\r\n if (digitalRead(row2)==0) {chr = 'H'; symb=':';}\r\n if (digitalRead(row3)==0) {chr = 'Y'; symb=')';}\r\n if (digitalRead(row4)==0) {chr = '|'; symb='|'; enter=1;} // this should be a CR but I am substituting a pipe for CR in this implementation\r\n if (digitalRead(row5)==0) {chr = 'B'; symb='!';}\r\n if (digitalRead(row6)==0) {chr = 'N'; symb=',';}\r\n if (digitalRead(row7)==0) {chr = 'J'; symb=';';}\r\n \r\n pinMode(col4, INPUT); \r\n pinMode(col5, OUTPUT); \r\n digitalWrite(col5, LOW);\r\n delay(1);\r\n if (digitalRead(row1)==0) {chr = 'O'; symb='+';}\r\n if (digitalRead(row2)==0) {chr = 'L'; symb='\"';}\r\n if (digitalRead(row3)==0) {chr = 'I'; symb='-';}\r\n if (digitalRead(row4)==0) {chr = 8;} // backspace\r\n if (digitalRead(row5)==0) {chr = '$'; symb='`';}\r\n if (digitalRead(row6)==0) {chr = 'M'; symb='.';}\r\n if (digitalRead(row7)==0) {chr = 'K'; symb='\\'';}\r\n \r\n pinMode(col5, INPUT); \r\nif(alt_for_wasd==false){\r\n if (chr != oldchr)\r\n if (chr==8) // Deal with backspace \r\n {\r\n if ((pos > 0) || (curline > 0)) // don't underflow our buffer\r\n {\r\n if (pos==0) {pos=20; curline--;}\r\n buf[curline][--pos] = 0;\r\n time = millis();\r\n displaychanged = 1;\r\n }\r\n }\r\n else if (chr !=0)\r\n {\r\n if (curline < 6) // don't overflow our buffer \r\n {\r\n if (sym==1) // if the symbol key is pressed, put it in the buff as a symbol\r\n buf[curline][pos] = symb;\r\n // enter raw/upper case character if shift is selected or it is not a shiftable character\r\n else if (shift==1 || shiftlock==1 || chr=='$' || chr==' ' || chr=='~' || chr == 13)\r\n buf[curline][pos] = chr;\r\n // otherwise enter as a lower case character\r\n else\r\n buf[curline][pos] = (chr+32); \r\n \r\n // advance end of buffer\r\n buf[curline][++pos] = 0;\r\n if (pos>19) {curline++; pos=0;}\r\n time = millis();\r\n displaychanged = 1;\r\n }\r\n }\r\n \r\n // Pressing both shift keys together is taken as a shift lock operation\r\n \r\n if (shl == 1 && shr == 1 && shiftlockchanged == 0)\r\n {\r\n shiftlock = (shiftlock==0)?1:0;\r\n shiftlockchanged = 1; // prevent multiple shift lock activations\r\n }\r\n\r\n // release shift lock multi-activation production when either shift key is released.\r\n if ((shl == 0) || (shr == 0))\r\n shiftlockchanged = 0;\r\n \r\n oldchr = chr; // remember old character so we don't have a high keyboard repeat rate\r\n}\r\n // however, allow repeat if there has been no change in keypress in 200ms by clearing old character\r\n \r\n if ((millis()-time)>200)\r\n {\r\n oldchr = 0;\r\n time = millis();\r\n }\r\n\r\n \r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/LORA_Messenger/utils.ino", "content": "//LORA STUFF\r\nvoid prepareTX(void) {\r\n digitalWrite(RXEN, LOW);\r\n digitalWrite(TXEN, HIGH);\r\n\r\n}\r\n\r\nvoid prepareRX(void) {\r\n digitalWrite(TXEN, LOW);\r\n digitalWrite(RXEN, HIGH);\r\n}\r\n\r\n// this function is called when a complete packet\r\n// is received by the module\r\n// IMPORTANT: this function MUST be 'void' type\r\n// and MUST NOT have any arguments!\r\nvoid setFlag(void) {\r\n // check if the interrupt is enabled\r\n if (!enableInterrupt) {\r\n return;\r\n }\r\n // we got a packet, set the flag\r\n receivedFlag = true;\r\n}\r\n\r\n//ALARM function\r\nvoid notificationAlarm(void){\r\n digitalWrite(K_BLT, HIGH);\r\n digitalWrite(MOT, HIGH);\r\n delay(200);\r\n digitalWrite(K_BLT, LOW);\r\n digitalWrite(MOT, LOW);\r\n\r\n tone(PIN_BUZZER, 2000, 70);\r\n}\r\n\r\nvoid testdrawchar(void) {\r\n display.setTextSize(0);\r\n display.setTextColor(BLACK);\r\n display.setCursor(0, 0);\r\n display.cp437(true);\r\n\r\n for (int i = 0; i < 256; i++) {\r\n if (i == '\\n') continue;\r\n display.write(i);\r\n }\r\n display.refresh();\r\n}\r\n\r\n//Fuel Gauge\r\n\r\n\r\nvoid printBatteryStats()\r\n{\r\n // Read battery stats from the BQ27441-G1A\r\n unsigned int soc = lipo.soc(); // Read state-of-charge (%)\r\n unsigned int volts = lipo.voltage(); // Read battery voltage (mV)\r\n int current = lipo.current(AVG); // Read average current (mA)\r\n unsigned int fullCapacity = lipo.capacity(FULL); // Read full capacity (mAh)\r\n unsigned int capacity = lipo.capacity(REMAIN); // Read remaining capacity (mAh)\r\n int power = lipo.power(); // Read average power draw (mW)\r\n int health = lipo.soh(); // Read state-of-health (%)\r\n blebas.write(soc);\r\n // Now print out those values:\r\n String toPrint = String(soc) + \"% | \";\r\n toPrint += String(volts) + \" mV | \";\r\n toPrint += String(current) + \" mA | \";\r\n toPrint += String(capacity) + \" / \";\r\n toPrint += String(fullCapacity) + \" mAh | \";\r\n toPrint += String(power) + \" mW | \";\r\n toPrint += String(health) + \"%\";\r\n\r\n Serial.println(toPrint);\r\n}\r\n" }, { "path": "Q10 Lora Communicator/Arduino/readme.txt", "content": "Before running the sketch, the adafruit feather express variant files have to be replaced with the provided ones first. They are located here under Windows:\r\nC:\\Users\\xxxxxxxxx\\AppData\\Local\\Arduino15\\packages\\adafruit\\hardware\\nrf52\\1.0.0\\variants\r\n\r\nThe feather nrf52840 express bootloader needs to be flashed via a segger jlink and the Arduino IDE." }, { "path": "Q10 Lora Communicator/Arduino/variants/feather_nrf52840_express/variant.cpp", "content": "/*\n Copyright (c) 2014-2015 Arduino LLC. All right reserved.\n Copyright (c) 2016 Sandeep Mistry All right reserved.\n Copyright (c) 2018, Adafruit Industries (adafruit.com)\n\n This library is free software; you can redistribute it and/or\n modify it under the terms of the GNU Lesser General Public\n License as published by the Free Software Foundation; either\n version 2.1 of the License, or (at your option) any later version.\n\n This library is distributed in the hope that it will be useful,\n but WITHOUT ANY WARRANTY; without even the implied warranty of\n MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n See the GNU Lesser General Public License for more details.\n\n You should have received a copy of the GNU Lesser General Public\n License along with this library; if not, write to the Free Software\n Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA\n*/\n\n#include \"variant.h\"\n#include \"wiring_constants.h\"\n#include \"wiring_digital.h\"\n#include \"nrf.h\"\n\n/*\nconst uint32_t g_ADigitalPinMap[] =\n{\n // D0 .. D13\n 25, // D0 is P0.25 (UART TX)\n 24, // D1 is P0.24 (UART RX \n 10, // D2 is P0.10 (NFC2)\n 47, // D3 is P1.15 (LED1)\n 42, // D4 is P1.10 (LED2)\n 40, // D5 is P1.08\n 7, // D6 is P0.07\n 34, // D7 is P1.02 (Button)\n 16, // D8 is P0.16 (NeoPixel)\n 26, // D9 is P0.26\n 27, // D10 is P0.27\n 6, // D11 is P0.06\n 8, // D12 is P0.08\n 41, // D13 is P1.09\n\n // D14 .. D21 (aka A0 .. A7)\n 4, // D14 is P0.04 (A0)\n 5, // D15 is P0.05 (A1)\n 30, // D16 is P0.30 (A2)\n 28, // D17 is P0.28 (A3)\n 2, // D18 is P0.02 (A4)\n 3, // D19 is P0.03 (A5)\n 29, // D20 is P0.29 (A6, Battery)\n 31, // D21 is P0.31 (A7, ARef)\n\n // D22 .. D23 (aka I2C pins)\n 12, // D22 is P0.12 (SDA)\n 11, // D23 is P0.11 (SCL)\n\n // D24 .. D26 (aka SPI pins)\n 15, // D24 is P0.15 (SPI MISO)\n 13, // D25 is P0.13 (SPI MOSI)\n 14, // D26 is P0.14 (SPI SCK )\n\n // QSPI pins (not exposed via any header / test point)\n 19, // D27 is P0.19 (QSPI CLK)\n 20, // D28 is P0.20 (QSPI CS)\n 17, // D29 is P0.17 (QSPI Data 0)\n 22, // D30 is P0.22 (QSPI Data 1)\n 23, // D31 is P0.23 (QSPI Data 2)\n 21, // D32 is P0.21 (QSPI Data 3)\n\n // The remaining NFC pin\n 9, // D33 is P0.09 (NFC1, exposed only via test point on bottom of board)\n\n // Thus, there are 34 defined pins\n\n // The remaining pins are not usable:\n //\n //\n // The following pins were never listed as they were considered unusable\n // 0, // P0.00 is XL1 (attached to 32.768kHz crystal)\n // 1, // P0.01 is XL2 (attached to 32.768kHz crystal)\n // 18, // P0.18 is RESET (attached to switch)\n // 32, // P1.00 is SWO (attached to debug header)\n // \n // The remaining pins are not connected (per schematic)\n // 33, // P1.01 is not connected per schematic\n // 35, // P1.03 is not connected per schematic\n // 36, // P1.04 is not connected per schematic\n // 37, // P1.05 is not connected per schematic\n // 38, // P1.06 is not connected per schematic\n // 39, // P1.07 is not connected per schematic\n // 43, // P1.11 is not connected per schematic\n // 44, // P1.12 is not connected per schematic\n // 45, // P1.13 is not connected per schematic\n // 46, // P1.14 is not connected per schematic\n};\n*/\n\nconst uint32_t g_ADigitalPinMap[] =\n{\n // P0\n 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ,\n 8 , 9 , 10, 11, 12, 13, 14, 15,\n 16, 17, 18, 19, 20, 21, 22, 23,\n 24, 25, 26, 27, 28, 29, 30, 31,\n\n // P1\n 32, 33, 34, 35, 36, 37, 38, 39,\n 40, 41, 42, 43, 44, 45, 46, 47\n};\n\nvoid initVariant()\n{\n // LED1 & LED2\n pinMode(PIN_LED1, OUTPUT);\n ledOff(PIN_LED1);\n\n pinMode(PIN_LED2, OUTPUT);\n ledOff(PIN_LED2);\n}\n\n" }, { "path": "Q10 Lora Communicator/Arduino/variants/feather_nrf52840_express/variant.h", "content": " /*\n Copyright (c) 2014-2015 Arduino LLC. All right reserved.\n Copyright (c) 2016 Sandeep Mistry All right reserved.\n Copyright (c) 2018, Adafruit Industries (adafruit.com)\n\n This library is free software; you can redistribute it and/or\n modify it under the terms of the GNU Lesser General Public\n License as published by the Free Software Foundation; either\n version 2.1 of the License, or (at your option) any later version.\n This library is distributed in the hope that it will be useful,\n but WITHOUT ANY WARRANTY; without even the implied warranty of\n MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n See the GNU Lesser General Public License for more details.\n You should have received a copy of the GNU Lesser General Public\n License along with this library; if not, write to the Free Software\n Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA\n*/\n\n#ifndef _VARIANT_FEATHER52840_\n#define _VARIANT_FEATHER52840_\n\n/** Master clock frequency */\n#define VARIANT_MCK (64000000ul)\n\n#define USE_LFXO // Board uses 32khz crystal for LF\n// define USE_LFRC // Board uses RC for LF\n\n/*----------------------------------------------------------------------------\n * Headers\n *----------------------------------------------------------------------------*/\n\n#include \"WVariant.h\"\n\n#ifdef __cplusplus\nextern \"C\"\n{\n#endif // __cplusplus\n\n\n// Number of pins defined in PinDescription array\n#define PINS_COUNT (48)\n#define NUM_DIGITAL_PINS (48)\n#define NUM_ANALOG_INPUTS (6) // A6 is used for battery, A7 is analog reference\n#define NUM_ANALOG_OUTPUTS (0)\n\n// LEDs\n#define PIN_LED1 (42)\n#define PIN_LED2 (47)\n#define PIN_NEOPIXEL (8)\n#define NEOPIXEL_NUM 1\n\n#define LED_BUILTIN PIN_LED1\n#define LED_CONN PIN_LED2\n\n#define LED_RED PIN_LED1\n#define LED_BLUE PIN_LED2\n\n#define LED_STATE_ON 1 // State when LED is litted\n\n/*\n * Buttons\n */\n#define PIN_BUTTON1 (34)\n\n/*\n * Analog pins\n */\n#define PIN_A0 (14)\n#define PIN_A1 (15)\n#define PIN_A2 (16)\n#define PIN_A3 (17)\n#define PIN_A4 (18)\n#define PIN_A5 (19)\n#define PIN_A6 (20)\n#define PIN_A7 (21)\n\nstatic const uint8_t A0 = PIN_A0 ;\nstatic const uint8_t A1 = PIN_A1 ;\nstatic const uint8_t A2 = PIN_A2 ;\nstatic const uint8_t A3 = PIN_A3 ;\nstatic const uint8_t A4 = PIN_A4 ;\nstatic const uint8_t A5 = PIN_A5 ;\nstatic const uint8_t A6 = PIN_A6 ;\nstatic const uint8_t A7 = PIN_A7 ;\n#define ADC_RESOLUTION 14\n\n// Other pins\n#define PIN_AREF PIN_A7\n#define PIN_VBAT PIN_A6\n#define PIN_NFC1 (9)\n#define PIN_NFC2 (10)\n\nstatic const uint8_t AREF = PIN_AREF;\n\n/*\n * Serial interfaces\n */\n#define PIN_SERIAL1_RX (3)\n#define PIN_SERIAL1_TX (2)\n\n/*\n * SPI Interfaces\n */\n#define SPI_INTERFACES_COUNT 1\n\n#define PIN_SPI_MISO (15)\n#define PIN_SPI_MOSI (13)\n#define PIN_SPI_SCK (14)\n\nstatic const uint8_t SS = (27);\nstatic const uint8_t MOSI = PIN_SPI_MOSI ;\nstatic const uint8_t MISO = PIN_SPI_MISO ;\nstatic const uint8_t SCK = PIN_SPI_SCK ;\n\n/*\n * Wire Interfaces\n */\n#define WIRE_INTERFACES_COUNT 1\n\n#define PIN_WIRE_SDA (38)\n#define PIN_WIRE_SCL (36)\n\n// QSPI Pins\n#define PIN_QSPI_SCK 7\n#define PIN_QSPI_CS 21\n#define PIN_QSPI_IO0 5\n#define PIN_QSPI_IO1 23\n#define PIN_QSPI_IO2 12\n#define PIN_QSPI_IO3 41\n\n\n\n// On-board QSPI Flash\n#define EXTERNAL_FLASH_DEVICES GD25Q16C\n#define EXTERNAL_FLASH_USE_QSPI\n\n#ifdef __cplusplus\n}\n#endif\n\n/*----------------------------------------------------------------------------\n * Arduino objects - C++ only\n *----------------------------------------------------------------------------*/\n\n#endif\n" }, { "path": "Q10 Lora Communicator/Arduino/variants/feather_nrf52840_express/variant.h_old.txt", "content": " /*\n Copyright (c) 2014-2015 Arduino LLC. All right reserved.\n Copyright (c) 2016 Sandeep Mistry All right reserved.\n Copyright (c) 2018, Adafruit Industries (adafruit.com)\n\n This library is free software; you can redistribute it and/or\n modify it under the terms of the GNU Lesser General Public\n License as published by the Free Software Foundation; either\n version 2.1 of the License, or (at your option) any later version.\n This library is distributed in the hope that it will be useful,\n but WITHOUT ANY WARRANTY; without even the implied warranty of\n MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n See the GNU Lesser General Public License for more details.\n You should have received a copy of the GNU Lesser General Public\n License along with this library; if not, write to the Free Software\n Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA\n*/\n\n#ifndef _VARIANT_FEATHER52840_\n#define _VARIANT_FEATHER52840_\n\n/** Master clock frequency */\n#define VARIANT_MCK (64000000ul)\n\n#define USE_LFXO // Board uses 32khz crystal for LF\n// define USE_LFRC // Board uses RC for LF\n\n/*----------------------------------------------------------------------------\n * Headers\n *----------------------------------------------------------------------------*/\n\n#include \"WVariant.h\"\n\n#ifdef __cplusplus\nextern \"C\"\n{\n#endif // __cplusplus\n\n\n// Number of pins defined in PinDescription array\n#define PINS_COUNT (34)\n#define NUM_DIGITAL_PINS (34)\n#define NUM_ANALOG_INPUTS (6) // A6 is used for battery, A7 is analog reference\n#define NUM_ANALOG_OUTPUTS (0)\n\n// LEDs\n#define PIN_LED1 (3)\n#define PIN_LED2 (4)\n#define PIN_NEOPIXEL (8)\n#define NEOPIXEL_NUM 1\n\n#define LED_BUILTIN PIN_LED1\n#define LED_CONN PIN_LED2\n\n#define LED_RED PIN_LED1\n#define LED_BLUE PIN_LED2\n\n#define LED_STATE_ON 1 // State when LED is litted\n\n/*\n * Buttons\n */\n#define PIN_BUTTON1 (7)\n\n/*\n * Analog pins\n */\n#define PIN_A0 (14)\n#define PIN_A1 (15)\n#define PIN_A2 (16)\n#define PIN_A3 (17)\n#define PIN_A4 (18)\n#define PIN_A5 (19)\n#define PIN_A6 (20)\n#define PIN_A7 (21)\n\nstatic const uint8_t A0 = PIN_A0 ;\nstatic const uint8_t A1 = PIN_A1 ;\nstatic const uint8_t A2 = PIN_A2 ;\nstatic const uint8_t A3 = PIN_A3 ;\nstatic const uint8_t A4 = PIN_A4 ;\nstatic const uint8_t A5 = PIN_A5 ;\nstatic const uint8_t A6 = PIN_A6 ;\nstatic const uint8_t A7 = PIN_A7 ;\n#define ADC_RESOLUTION 14\n\n// Other pins\n#define PIN_AREF PIN_A7\n#define PIN_VBAT PIN_A6\n#define PIN_NFC1 (33)\n#define PIN_NFC2 (2)\n\nstatic const uint8_t AREF = PIN_AREF;\n\n/*\n * Serial interfaces\n */\n#define PIN_SERIAL1_RX (1)\n#define PIN_SERIAL1_TX (0)\n\n/*\n * SPI Interfaces\n */\n#define SPI_INTERFACES_COUNT 1\n\n#define PIN_SPI_MISO (24)\n#define PIN_SPI_MOSI (25)\n#define PIN_SPI_SCK (26)\n\nstatic const uint8_t SS = (5);\nstatic const uint8_t MOSI = PIN_SPI_MOSI ;\nstatic const uint8_t MISO = PIN_SPI_MISO ;\nstatic const uint8_t SCK = PIN_SPI_SCK ;\n\n/*\n * Wire Interfaces\n */\n#define WIRE_INTERFACES_COUNT 1\n\n#define PIN_WIRE_SDA (22)\n#define PIN_WIRE_SCL (23)\n\n// QSPI Pins\n#define PIN_QSPI_SCK 27\n#define PIN_QSPI_CS 28\n#define PIN_QSPI_IO0 29\n#define PIN_QSPI_IO1 30\n#define PIN_QSPI_IO2 31\n#define PIN_QSPI_IO3 32\n\n\n\n// On-board QSPI Flash\n#define EXTERNAL_FLASH_DEVICES GD25Q16C\n#define EXTERNAL_FLASH_USE_QSPI\n\n#ifdef __cplusplus\n}\n#endif\n\n/*----------------------------------------------------------------------------\n * Arduino objects - C++ only\n *----------------------------------------------------------------------------*/\n\n#endif\n" }, { "path": "Q10 Lora Communicator/Hardware/LoRa-Messenger-v1.0.csv", "content": "Part;Value;Device;Package;Description;DATASHEET;DIGIKEY;ELEMENT14;OTHER;PROD_ID;SPICEPREFIX;TP_SIGNAL_NAME;URL;VALUE\r\n1V8;TPSQTP13R;TPSQTP13R;TP13R;Test pad;;;;;;;;;\r\n3V;TPSQTP13R;TPSQTP13R;TP13R;Test pad;;;;;;;;;\r\nANT;;SMACONNECTOR_EDGE;SMA_EDGELAUNCH;SMA Connector;;;;;;;;;\r\nC1;10;C-EUC0805;C0805;CAPACITOR, European symbol;;;;;;C;;;\r\nC2;1.0uF;1.0UF-16V-10%(0603);0603-CAP;CAP-00868;;;;;CAP-00868;;;;1.0uF\r\nC3;100n;C-EUC0402;C0402;CAPACITOR, European symbol;;;;;;;;;\r\nC4;0.47uF;CAP0603-CAP;0603-CAP;Capacitor;;;;;CAP-13216;;;;\r\nC5;1.0uF;1.0UF-16V-10%(0603);0603-CAP;CAP-00868;;;;;CAP-00868;;;;1.0uF\r\nC6;10uF;CAP_CERAMIC0805-NOOUTLINE;0805-NO;Ceramic Capacitors;;;;;;;;;\r\nC7;10uF;CAP_CERAMIC0805-NOOUTLINE;0805-NO;Ceramic Capacitors;;;;;;;;;\r\nC8;10uF;CAP_CERAMIC0805-NOOUTLINE;0805-NO;Ceramic Capacitors;;;;;;;;;\r\nC9;10;C-EUC0805;C0805;CAPACITOR, European symbol;;;;;;C;;;\r\nC10;10uF;CAP_CERAMIC0805-NOOUTLINE;0805-NO;Ceramic Capacitors;;;;;;;;;\r\nC11;10uF;1.0UF-16V-10%(0603);0603-CAP;CAP-00868;;;;;CAP-00868;;;;1.0uF\r\nC12;10nF 10%;CAP-0603;C0603;Ceramic Capacitors;;;;;;;;;\r\nC13;1F;C-EUC0402;C0402;CAPACITOR, European symbol;;;;;;;;;\r\nC14;130pf;1.0UF-16V-10%(0603);0603-CAP;CAP-00868;;;;;CAP-00868;;;;1.0uF\r\nC15;100n;C-EUC0402;C0402;CAPACITOR, European symbol;;;;;;;;;\r\nC16;100nF 10%;CAP-0603;C0603;Ceramic Capacitors;;;;;;;;;\r\nC17;10uF;1.0UF-16V-10%(0603);0603-CAP;CAP-00868;;;;;CAP-00868;;;;1.0uF\r\nC18;100nF 10%;CAP-0603;C0603;Ceramic Capacitors;;;;;;;;;\r\nC19;130pf;1.0UF-16V-10%(0603);0603-CAP;CAP-00868;;;;;CAP-00868;;;;1.0uF\r\nC20;100;C-EUC1206;C1206;CAPACITOR, European symbol;;;;;;C;;;\r\nC21;100;C-EUC1206;C1206;CAPACITOR, European symbol;;;;;;C;;;\r\nC22;100n;1.0UF-16V-10%(0603);0603-CAP;CAP-00868;;;;;CAP-00868;;;;1.0uF\r\nC23;10;C-EUC0805;C0805;CAPACITOR, European symbol;;;;;;C;;;\r\nC24;100nF 10%;CAP-0603;C0603;Ceramic Capacitors;;;;;;;;;\r\nC25;100nF 10%;CAP-0603;C0603;Ceramic Capacitors;;;;;;;;;\r\nC26;100n;1.0UF-16V-10%(0603);0603-CAP;CAP-00868;;;;;CAP-00868;;;;1.0uF\r\nC27;1;1.0UF-16V-10%(0603);0603-CAP;CAP-00868;;;;;CAP-00868;;;;1.0uF\r\nD1;MBR120;DIODE-SCHOTTKYSOD-123;SOD-123;;;;;;;;;;\r\nD3;RED;LED0805_NOOUTLINE;CHIPLED_0805_NOOUTLINE;LED;;;;;;;;;\r\nD5;RED;LED0805_NOOUTLINE;CHIPLED_0805_NOOUTLINE;LED;;;;;;;;;\r\nD6;BAT20J;DIODE-SCHOTTKY-BAT20J;SOD-323;Schottky diodes in SFE's production catalog;;;;;DIO-11623;;;;BAT20J\r\nDWN2;LS12T2;LS12T2;LS12T2;;;;;;;;;;\r\nEXTC.;TPSQTP13R;TPSQTP13R;TP13R;Test pad;;;;;;;;;\r\nGND;TPSQTP13R;TPSQTP13R;TP13R;Test pad;;;;;;;;;\r\nIC1;AP3602;AP3602;SOT23-6;;;;;;;;;;\r\nIC2;GD25Q16;SPIFLASH_8PINUX;USON8;SOIC8 SPI Flash;;;;;;;;;\r\nJ2;;USB_C16PIN;USB-C-16P;USB Type C 16Pin Connector;;;;;CONN-14122;;;;\r\nJ3;CORTEX_JTAG_DEBUG_MINIMUM_PTH_NS;CORTEX_JTAG_DEBUG_MINIMUM_PTH_NS;2X5-PTH-1.27MM-NO_SILK;Cortex Debug Connector - 10 pin;;;;;;;;;\r\nJP2;;M02PTH;1X02;\"Standard 2-pin 0.1 header. Use with\"\"\";;;;;;;;;\r\nLED1;RGBLED5050;RGBLED5050;RGBLED5050;For 5050 RGB LEDs, the order of the LEDs may vary from one manufacturer to another!;;;;;;;;;\r\nQ2;DMG2305;MOSFET-P;SOT23-R;P-Channel Mosfet;;;;;;;;;\r\nQ3;DMG2305;MOSFET-P;SOT23-R;P-Channel Mosfet;;;;;;;;;\r\nR1;100k;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR2;100k;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR3;1K;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR4;1.1k;R-EU_R0603;R0603;RESISTOR, European symbol;;;;;;R;;;\r\nR5;10mOhm;R-EU_R0805;R0805;RESISTOR, European symbol;;;;;;R;;;\r\nR6;4k7;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR7;1K;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR8;100k;R-EU_R0603;R0603;RESISTOR, European symbol;;;;;;;;;\r\nR9;4k7;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR10;10k;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR11;10k;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR12;5.1k;R-EU_R0603;R0603;RESISTOR, European symbol;;;;;;R;;;\r\nR13;5.1k;R-EU_R0603;R0603;RESISTOR, European symbol;;;;;;R;;;\r\nR14;68;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR15;68;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR16;1K;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR17;1K;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR18;47;R-EU_R0603;R0603;RESISTOR, European symbol;;;;;;;;;\r\nR19;10k;R-EU_R0603;R0603;RESISTOR, European symbol;;;;;;;;;\r\nR20;100k;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR21;10;R-EU_R0603;R0603;RESISTOR, European symbol;;;;;;;;;\r\nR22;10k;R-EU_R0603;R0603;RESISTOR, European symbol;;;;;;;;;\r\nR23;68;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nR26;1k;RESISTOR_0603_NOOUT;0603-NO;Resistors;;;;;;;;;\r\nSCL;TPSQTP13R;TPSQTP13R;TP13R;Test pad;;;;;;;;;\r\nSDA;TPSQTP13R;TPSQTP13R;TP13R;Test pad;;;;;;;;;\r\nSJ1;;SOLDERJUMPER_2WAY-OLDS;SJ_3;Solder Jumper;;;;;;;;;\r\nSJ2;;SOLDERJUMPER_2WAY-OLDS;SJ_3;Solder Jumper;;;;;;;;;\r\nSJ3;;SOLDERJUMPER_2WAY-OLDS;SJ_3;Solder Jumper;;;;;;;;;\r\nSJ4;;SJ;SJ;SMD solder JUMPER;;;;;;;;;\r\nSJ5;;SOLDERJUMPER_2WAY-OLDS;SJ_3;Solder Jumper;;;;;;;;;\r\nSJ7;SOLDERJUMPERTRACE;SOLDERJUMPERTRACE;SJ_2S-TRACE;Solder Jumper;;;;;;;;;\r\nSJ8;SOLDERJUMPERTRACE;SOLDERJUMPERTRACE;SJ_2S-TRACE;Solder Jumper;;;;;;;;;\r\nU$2;BUZZER;BUZZER;BUZZER;;9032 type;;;;;;;;\r\nU$7;Q10KEYBOARD;Q10KEYBOARD;Q10KEYBOARD;;Hirose BM14B(0.8)-24DS-0.4V(53);;;;;;;;\r\nU$10;AYF531035_SHARP_MEM_DISP;AYF531035_SHARP_MEM_DISP;AYF531035_Y5BW;;;;;;;;;;\r\nU$14;NRF52840;NRF52840;NRF52840MOD;;;;;;;;;;\r\nU$17;JST-SH-3;JST-SH-3;JST-SH-3;;;;;;;;;;\r\nU$28;N-CHANNEL-MOSFET-BSS138;N-CHANNEL-MOSFET-BSS138;SOT23-3;N-Channel MOSFET Mode Field Effect Transistor;http://www.fairchildsemi.com/ds/BS/BSS138.pdf;BSS138TR-ND;2323154;;;;;http://au.element14.com/fairchild-semiconductor/bss138/mosfet-n-ch-50v-220ma-sot-23/dp/2323154;\r\nU$36;SX1292-EBYTE;SX1292-EBYTE;SX1262_EBYTE;;;;;;;;;;\r\nU$41;N-CHANNEL-MOSFET-BSS138;N-CHANNEL-MOSFET-BSS138;SOT23-3;N-Channel MOSFET Mode Field Effect Transistor;http://www.fairchildsemi.com/ds/BS/BSS138.pdf;BSS138TR-ND;2323154;;;;;http://au.element14.com/fairchild-semiconductor/bss138/mosfet-n-ch-50v-220ma-sot-23/dp/2323154;\r\nU$45;SWITCH_SPDT;SWITCH_SPDT;KPS-1290;SWCH-10651;;;;;SWCH-10651;;;;\r\nU$46;VIBRO;VIBRO;VIBRO;;;;;;10x4mm surface mount vibration motor;;;;\r\nU$47;TP4056BETTER_TP4056;TP4056BETTER_TP4056;TP4056BETTER_SO-08;;;;;;;;;;\r\nU$69;DS3231M;DS3231M;SO8;;;;;;;;;;\r\nU$74;N-CHANNEL-MOSFET-BSS138;N-CHANNEL-MOSFET-BSS138;SOT23-3;N-Channel MOSFET Mode Field Effect Transistor;http://www.fairchildsemi.com/ds/BS/BSS138.pdf;BSS138TR-ND;2323154;;;;;http://au.element14.com/fairchild-semiconductor/bss138/mosfet-n-ch-50v-220ma-sot-23/dp/2323154;\r\nU1;BQ27441-G1;BQ27441-G1;PDSO-N12;;;;;;IC-13220;;;;\r\nU2;AP2112(3.3V);VREG_SOT23-5;SOT23-5;SOT23-5 Fixed Voltage Regulators;;;;;;;;;\r\nU3;BME280;BME280;BME280;BME280 - Environmental Sensor (I2C + SPI);;;;;;;;;\r\nU4;MPU-9250;MPU-9250;LEAD-QFN24;;;;;;;;;;\r\nX1;JSTPH;CON_JST_PH_2PIN;JSTPH2;JST 2-Pin Right-Angle Connector;;;;;;;;;\r\nX4;microsd;MICROSD;MICROSD;MicroSD/Transflash Card Holder with SPI pinout;;;;;;;;;\r\n" }, { "path": "Q10 Lora Communicator/Hardware/LoRa-Messenger-v1.0.mnb", "content": "1V8 12.38 17.46 0 TPSQTP13R TP13R\r\n3V 1.91 55.88 0 TPSQTP13R TP13R\r\nANT 54.61 95.76 270 SMA_EDGELAUNCH\r\nC1 25.40 10.79 90 10 C0805\r\nC2 50.16 11.43 90 1.0uF 0603-CAP\r\nC3 33.02 55.88 0 100n C0402\r\nC4 14.92 17.46 180 0.47uF 0603-CAP\r\nC5 15.88 14.92 90 1.0uF 0603-CAP\r\nC6 46.36 11.43 270 10uF 0805-NO\r\nC7 39.37 11.43 270 10uF 0805-NO\r\nC8 20.32 87.63 0 10uF 0805-NO\r\nC9 21.91 76.20 180 10 C0805\r\nC10 25.40 14.61 90 10uF 0805-NO\r\nC11 53.98 13.97 0 10uF 0603-CAP\r\nC12 3.81 43.82 180 10nF 10% C0603\r\nC13 33.02 54.61 0 1F C0402\r\nC14 5.08 69.22 90 130pf 0603-CAP\r\nC15 23.50 83.82 270 100n C0402\r\nC16 20.32 2.54 180 100nF 10% C0603\r\nC17 56.83 11.43 90 10uF 0603-CAP\r\nC18 5.08 39.37 0 100nF 10% C0603\r\nC19 5.08 65.41 270 130pf 0603-CAP\r\nC20 61.60 76.84 180 100 C1206\r\nC21 40.64 73.66 0 100 C1206\r\nC22 7.30 48.90 180 100n 0603-CAP\r\nC23 40.64 76.20 0 10 C0805\r\nC24 7.30 40.01 270 100nF 10% C0603\r\nC25 7.30 38.42 270 100nF 10% C0603\r\nC26 2.86 22.86 0 100n 0603-CAP\r\nC27 2.86 24.45 0 1 0603-CAP\r\nD1 34.29 14.29 0 MBR120 SOD-123\r\nD6 22.23 2.54 270 BAT20J SOD-323\r\nDWN2 2.62 46.36 0 LS12T2 LS12T2\r\nEXTC. 38.73 52.07 0 TPSQTP13R TP13R\r\nGND 1.91 53.98 0 TPSQTP13R TP13R\r\nIC1 53.34 11.43 270 AP3602 SOT23-6\r\nIC2 21.59 83.19 90 GD25Q16 USON8\r\nJ2 34.29 3.80 0 USB-C-16P\r\nQ2 11.43 93.34 180 DMG2305 SOT23-R\r\nQ3 34.29 11.75 180 DMG2305 SOT23-R\r\nR1 11.43 95.89 0 100k 0603-NO\r\nR2 30.48 13.65 90 100k 0603-NO\r\nR3 19.05 7.62 180 1K 0603-NO\r\nR4 17.78 12.70 90 1.1k R0603\r\nR5 14.61 7.62 180 10mOhm R0805\r\nR6 5.40 56.20 180 4k7 0603-NO\r\nR7 22.23 7.62 0 1K 0603-NO\r\nR8 27.30 5.71 270 100k R0603\r\nR9 5.40 54.61 180 4k7 0603-NO\r\nR10 10.79 12.70 90 10k 0603-NO\r\nR11 10.79 8.89 180 10k 0603-NO\r\nR12 41.91 2.54 0 5.1k R0603\r\nR13 41.91 5.08 0 5.1k R0603\r\nR14 21.59 72.71 0 68 0603-NO\r\nR15 21.59 74.30 0 68 0603-NO\r\nR16 9.53 89.54 270 1K 0603-NO\r\nR17 6.99 89.54 270 1K 0603-NO\r\nR18 24.13 2.54 270 47 R0603\r\nR19 24.77 5.08 0 10k R0603\r\nR20 43.18 15.24 0 100k 0603-NO\r\nR21 29.21 73.03 0 10 R0603\r\nR22 26.67 76.20 270 10k R0603\r\nR23 27.30 94.62 270 68 0603-NO\r\nR26 8.89 95.25 90 1k 0603-NO\r\nSCL 1.91 50.16 0 TPSQTP13R TP13R\r\nSDA 1.91 52.07 0 TPSQTP13R TP13R\r\nSJ1 15.24 95.25 0 SJ_3\r\nSJ2 8.89 51.44 90 SJ_3\r\nSJ3 33.66 58.42 0 SJ_3\r\nSJ4 5.71 23.50 90 SJ\r\nSJ5 33.66 61.91 180 SJ_3\r\nU$2 62.23 84.16 90 BUZZER BUZZER\r\nU$7 24.66 60.41 0 Q10KEYBOARD Q10KEYBOARD\r\nU$10 34.29 51.59 0 AYF531035_SHARP_MEM_DISP AYF531035_Y5BW\r\nU$14 11.07 79.61 270 NRF52840 NRF52840MOD\r\nU$17 20.58 94.58 180 JST-SH-3 JST-SH-3\r\nU$28 29.85 76.20 90 N-CHANNEL-MOSFET-BSS138 SOT23-3\r\nU$36 47.38 85.71 270 SX1292-EBYTE SX1262_EBYTE\r\nU$41 26.67 2.54 180 N-CHANNEL-MOSFET-BSS138 SOT23-3\r\nU$45 50.16 2.48 0 SWITCH_SPDT KPS-1290\r\nU$46 15.77 2.54 0 VIBRO VIBRO\r\nU$47 21.59 12.70 180 TP4056BETTER_TP4056 TP4056BETTER_SO-08\r\nU$69 4.45 27.94 90 DS3231M SO8\r\nU$74 30.16 94.62 90 N-CHANNEL-MOSFET-BSS138 SOT23-3\r\nU1 13.34 12.70 180 BQ27441-G1 PDSO-N12\r\nU2 43.18 11.43 90 AP2112(3.3V) SOT23-5\r\nU3 5.40 51.75 0 BME280 BME280\r\nU4 6.67 43.82 0 MPU-9250 LEAD-QFN24\r\nX1 5.08 12.87 0 JSTPH JSTPH2\r\nX4 60.15 67.93 270 microsd MICROSD\r\n" }, { "path": "Q10 Lora Communicator/Hardware/LoRa-Messenger-v1.0.mnt", "content": "ANT 54.61 95.76 270 SMA_EDGELAUNCH\r\nD3 33.02 2.54 0 RED CHIPLED_0805_NOOUTLINE\r\nD5 35.56 2.54 0 RED CHIPLED_0805_NOOUTLINE\r\nJ2 34.29 3.35 0 USB-C-16P\r\nLED1 34.29 93.98 270 RGBLED5050 RGBLED5050\r\nSJ7 4.76 68.58 180 SOLDERJUMPERTRACE SJ_2S-TRACE\r\nSJ8 4.76 66.04 0 SOLDERJUMPERTRACE SJ_2S-TRACE\r\n" }, { "path": "Q10 Lora Communicator/Hardware/eagle/LoRa-Messenger-v1.1.brd", "content": "\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n305060 battery?\n- +\n+\n-\nDS3231M\nRTC\nICM-20948\nBME280\n3V\n5V\n5V\n3V\n0x76\n0x77\nLow Power LORA QWERTY Communicator\nv1.1\nA. Jordan 2021\n9-DOF IMU\nint\next\n\n\n\n<b>Test Pins/Pads</b><p>\nCream on SMD OFF.<br>\nnew: Attribute TP_SIGNAL_NAME<br>\n<author>Created by librarian@cadsoft.de</author>\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n\n\nTEST PAD\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n>LABEL\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Resistors, Capacitors, Inductors</b><p>\nBased on the previous libraries:\n<ul>\n<li>r.lbr\n<li>cap.lbr \n<li>cap-fe.lbr\n<li>captant.lbr\n<li>polcap.lbr\n<li>ipc-smd.lbr\n</ul>\nAll SMD packages are defined according to the IPC specifications and CECC<p>\n<author>Created by librarian@cadsoft.de</author><p>\n<p>\nfor Electrolyt Capacitors see also :<p>\nwww.bccomponents.com <p>\nwww.panasonic.com<p>\nwww.kemet.com<p>\nhttp://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>\n<p>\nfor trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>\n\n<table border=0 cellspacing=0 cellpadding=0 width=\"100%\" cellpaddding=0>\n<tr valign=\"top\">\n\n<! <td width=\"10\">&nbsp;</td>\n<td width=\"90%\">\n\n<b><font color=\"#0000FF\" size=\"4\">TRIM-POT CROSS REFERENCE</font></b>\n<P>\n<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">BOURNS</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">BI&nbsp;TECH</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">DALE-VISHAY</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">PHILIPS/MEPCO</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">MURATA</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">PANASONIC</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">SPECTROL</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">MILSPEC</FONT>\n </B>\n </TD><TD>&nbsp;</TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >\n 3005P<BR>\n 3006P<BR>\n 3006W<BR>\n 3006Y<BR>\n 3009P<BR>\n 3009W<BR>\n 3009Y<BR>\n 3057J<BR>\n 3057L<BR>\n 3057P<BR>\n 3057Y<BR>\n 3059J<BR>\n 3059L<BR>\n 3059P<BR>\n 3059Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 89P<BR>\n 89W<BR>\n 89X<BR>\n 89PH<BR>\n 76P<BR>\n 89XH<BR>\n 78SLT<BR>\n 78L&nbsp;ALT<BR>\n 56P&nbsp;ALT<BR>\n 78P&nbsp;ALT<BR>\n T8S<BR>\n 78L<BR>\n 56P<BR>\n 78P<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n T18/784<BR>\n 783<BR>\n 781<BR>\n -<BR>\n -<BR>\n -<BR>\n 2199<BR>\n 1697/1897<BR>\n 1680/1880<BR>\n 2187<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 8035EKP/CT20/RJ-20P<BR>\n -<BR>\n RJ-20X<BR>\n -<BR>\n -<BR>\n -<BR>\n 1211L<BR>\n 8012EKQ&nbsp;ALT<BR>\n 8012EKR&nbsp;ALT<BR>\n 1211P<BR>\n 8012EKJ<BR>\n 8012EKL<BR>\n 8012EKQ<BR>\n 8012EKR<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 2101P<BR>\n 2101W<BR>\n 2101Y<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 2102L<BR>\n 2102S<BR>\n 2102Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n EVMCOG<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 43P<BR>\n 43W<BR>\n 43Y<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 40L<BR>\n 40P<BR>\n 40Y<BR>\n 70Y-T602<BR>\n 70L<BR>\n 70P<BR>\n 70Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n RT/RTR12<BR>\n RT/RTR12<BR>\n RT/RTR12<BR>\n -<BR>\n RJ/RJR12<BR>\n RJ/RJR12<BR>\n RJ/RJR12<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3250L<BR>\n 3250P<BR>\n 3250W<BR>\n 3250X<BR>\n 3252P<BR>\n 3252W<BR>\n 3252X<BR>\n 3260P<BR>\n 3260W<BR>\n 3260X<BR>\n 3262P<BR>\n 3262W<BR>\n 3262X<BR>\n 3266P<BR>\n 3266W<BR>\n 3266X<BR>\n 3290H<BR>\n 3290P<BR>\n 3290W<BR>\n 3292P<BR>\n 3292W<BR>\n 3292X<BR>\n 3296P<BR>\n 3296W<BR>\n 3296X<BR>\n 3296Y<BR>\n 3296Z<BR>\n 3299P<BR>\n 3299W<BR>\n 3299X<BR>\n 3299Y<BR>\n 3299Z<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66X&nbsp;ALT<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66X&nbsp;ALT<BR>\n -<BR>\n 64W&nbsp;ALT<BR>\n -<BR>\n 64P&nbsp;ALT<BR>\n 64W&nbsp;ALT<BR>\n 64X&nbsp;ALT<BR>\n 64P<BR>\n 64W<BR>\n 64X<BR>\n 66X&nbsp;ALT<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66P<BR>\n 66W<BR>\n 66X<BR>\n 67P<BR>\n 67W<BR>\n 67X<BR>\n 67Y<BR>\n 67Z<BR>\n 68P<BR>\n 68W<BR>\n 68X<BR>\n 67Y&nbsp;ALT<BR>\n 67Z&nbsp;ALT<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 5050<BR>\n 5091<BR>\n 5080<BR>\n 5087<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n T63YB<BR>\n T63XB<BR>\n -<BR>\n -<BR>\n -<BR>\n 5887<BR>\n 5891<BR>\n 5880<BR>\n -<BR>\n -<BR>\n -<BR>\n T93Z<BR>\n T93YA<BR>\n T93XA<BR>\n T93YB<BR>\n T93XB<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 8026EKP<BR>\n 8026EKW<BR>\n 8026EKM<BR>\n 8026EKP<BR>\n 8026EKB<BR>\n 8026EKM<BR>\n 1309X<BR>\n 1309P<BR>\n 1309W<BR>\n 8024EKP<BR>\n 8024EKW<BR>\n 8024EKN<BR>\n RJ-9P/CT9P<BR>\n RJ-9W<BR>\n RJ-9X<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3103P<BR>\n 3103Y<BR>\n 3103Z<BR>\n 3103P<BR>\n 3103Y<BR>\n 3103Z<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3105P/3106P<BR>\n 3105W/3106W<BR>\n 3105X/3106X<BR>\n 3105Y/3106Y<BR>\n 3105Z/3105Z<BR>\n 3102P<BR>\n 3102W<BR>\n 3102X<BR>\n 3102Y<BR>\n 3102Z<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMCBG<BR>\n EVMCCG<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 55-1-X<BR>\n 55-4-X<BR>\n 55-3-X<BR>\n 55-2-X<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 50-2-X<BR>\n 50-4-X<BR>\n 50-3-X<BR>\n -<BR>\n -<BR>\n -<BR>\n 64P<BR>\n 64W<BR>\n 64X<BR>\n 64Y<BR>\n 64Z<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RJ/RJR22<BR>\n RJ/RJR22<BR>\n RJ/RJR22<BR>\n RT/RTR26<BR>\n RT/RTR26<BR>\n RT/RTR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RT/RTR24<BR>\n RT/RTR24<BR>\n RT/RTR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3323P<BR>\n 3323S<BR>\n 3323W<BR>\n 3329H<BR>\n 3329P<BR>\n 3329W<BR>\n 3339H<BR>\n 3339P<BR>\n 3339W<BR>\n 3352E<BR>\n 3352H<BR>\n 3352K<BR>\n 3352P<BR>\n 3352T<BR>\n 3352V<BR>\n 3352W<BR>\n 3362H<BR>\n 3362M<BR>\n 3362P<BR>\n 3362R<BR>\n 3362S<BR>\n 3362U<BR>\n 3362W<BR>\n 3362X<BR>\n 3386B<BR>\n 3386C<BR>\n 3386F<BR>\n 3386H<BR>\n 3386K<BR>\n 3386M<BR>\n 3386P<BR>\n 3386S<BR>\n 3386W<BR>\n 3386X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 25P<BR>\n 25S<BR>\n 25RX<BR>\n 82P<BR>\n 82M<BR>\n 82PA<BR>\n -<BR>\n -<BR>\n -<BR>\n 91E<BR>\n 91X<BR>\n 91T<BR>\n 91B<BR>\n 91A<BR>\n 91V<BR>\n 91W<BR>\n 25W<BR>\n 25V<BR>\n 25P<BR>\n -<BR>\n 25S<BR>\n 25U<BR>\n 25RX<BR>\n 25X<BR>\n 72XW<BR>\n 72XL<BR>\n 72PM<BR>\n 72RX<BR>\n -<BR>\n 72PX<BR>\n 72P<BR>\n 72RXW<BR>\n 72RXL<BR>\n 72X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n T7YB<BR>\n T7YA<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n TXD<BR>\n TYA<BR>\n TYP<BR>\n -<BR>\n TYD<BR>\n TX<BR>\n -<BR>\n 150SX<BR>\n 100SX<BR>\n 102T<BR>\n 101S<BR>\n 190T<BR>\n 150TX<BR>\n 101<BR>\n -<BR>\n -<BR>\n 101SX<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ET6P<BR>\n ET6S<BR>\n ET6X<BR>\n RJ-6W/8014EMW<BR>\n RJ-6P/8014EMP<BR>\n RJ-6X/8014EMX<BR>\n TM7W<BR>\n TM7P<BR>\n TM7X<BR>\n -<BR>\n 8017SMS<BR>\n -<BR>\n 8017SMB<BR>\n 8017SMA<BR>\n -<BR>\n -<BR>\n CT-6W<BR>\n CT-6H<BR>\n CT-6P<BR>\n CT-6R<BR>\n -<BR>\n CT-6V<BR>\n CT-6X<BR>\n -<BR>\n -<BR>\n 8038EKV<BR>\n -<BR>\n 8038EKX<BR>\n -<BR>\n -<BR>\n 8038EKP<BR>\n 8038EKZ<BR>\n 8038EKW<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n 3321H<BR>\n 3321P<BR>\n 3321N<BR>\n 1102H<BR>\n 1102P<BR>\n 1102T<BR>\n RVA0911V304A<BR>\n -<BR>\n RVA0911H413A<BR>\n RVG0707V100A<BR>\n RVA0607V(H)306A<BR>\n RVA1214H213A<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3104B<BR>\n 3104C<BR>\n 3104F<BR>\n 3104H<BR>\n -<BR>\n 3104M<BR>\n 3104P<BR>\n 3104S<BR>\n 3104W<BR>\n 3104X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n EVMQ0G<BR>\n EVMQIG<BR>\n EVMQ3G<BR>\n EVMS0G<BR>\n EVMQ0G<BR>\n EVMG0G<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMK4GA00B<BR>\n EVM30GA00B<BR>\n EVMK0GA00B<BR>\n EVM38GA00B<BR>\n EVMB6<BR>\n EVLQ0<BR>\n -<BR>\n EVMMSG<BR>\n EVMMBG<BR>\n EVMMAG<BR>\n -<BR>\n -<BR>\n EVMMCS<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMM1<BR>\n -<BR>\n -<BR>\n EVMM0<BR>\n -<BR>\n -<BR>\n EVMM3<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n 62-3-1<BR>\n 62-1-2<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 67R<BR>\n -<BR>\n 67P<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 67X<BR>\n 63V<BR>\n 63S<BR>\n 63M<BR>\n -<BR>\n -<BR>\n 63H<BR>\n 63P<BR>\n -<BR>\n -<BR>\n 63X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n RJ/RJR50<BR>\n RJ/RJR50<BR>\n RJ/RJR50<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n</TABLE>\n<P>&nbsp;<P>\n<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>\n <TR>\n <TD COLSPAN=7>\n <FONT color=\"#0000FF\" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>\n <P>\n <FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3224G<BR>\n 3224J<BR>\n 3224W<BR>\n 3269P<BR>\n 3269W<BR>\n 3269X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 44G<BR>\n 44J<BR>\n 44W<BR>\n 84P<BR>\n 84W<BR>\n 84X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n ST63Z<BR>\n ST63Y<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n ST5P<BR>\n ST5W<BR>\n ST5X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=7>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=7>\n <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3314G<BR>\n 3314J<BR>\n 3364A/B<BR>\n 3364C/D<BR>\n 3364W/X<BR>\n 3313G<BR>\n 3313J<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 23B<BR>\n 23A<BR>\n 21X<BR>\n 21W<BR>\n -<BR>\n 22B<BR>\n 22A<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ST5YL/ST53YL<BR>\n ST5YJ/5T53YJ<BR>\n ST-23A<BR>\n ST-22B<BR>\n ST-22<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ST-4B<BR>\n ST-4A<BR>\n -<BR>\n -<BR>\n -<BR>\n ST-3B<BR>\n ST-3A<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n EVM-6YS<BR>\n EVM-1E<BR>\n EVM-1G<BR>\n EVM-1D<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n G4B<BR>\n G4A<BR>\n TR04-3S1<BR>\n TRG04-2S1<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n DVR-43A<BR>\n CVR-42C<BR>\n CVR-42A/C<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n</TABLE>\n<P>\n<FONT SIZE=4 FACE=ARIAL><B>ALT =&nbsp;ALTERNATE</B></FONT>\n<P>\n\n&nbsp;\n<P>\n</td>\n</tr>\n</table>\n\n\n<b>CAPACITOR</b><p>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nRESISTOR\n\n\nRESISTOR\n\n\n\n\n<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2>\n\n<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p>\n\n<h3>Obligatory Warning</h3>\n<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p>\n\n<h3>License</h3>\n<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p>\n<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n</p>\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>SOD-123</b>\n<p>Source: http://www.diodes.com/datasheets/ds30139.pdf</p>\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\nA\nC\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>SOT23</b> - Reflow soldering\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>Small Outline Transistor</b> - 5 Pin\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n<p>Source: http://ae-bst.resource.bosch.com/media/products/dokumente/bme280/BST-BME280_DS001-09.pdf</p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\nCourtesy: Adafruit Industries\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>Small Outline Transistor</b> - 6 Pin\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n2-Pin JST PH Series Right-Angle Connector (+/- for batteries)\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n<h3>SparkFun Electronics' preferred foot prints</h3>\nIn this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n<br><br>\n<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n<br><br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>SparkFun Electronics' preferred foot prints</h3>\nIn this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br>\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n<br><br>\n<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n<br><br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>Plated Through Hole - 2x5 ARM Cortex Debug Connector (10-pin)</h3>\n<p>tDoc (51) layer border represents maximum dimensions of plastic housing.</p>\n<p>Specifications:\n<ul><li>Pin count:10</li>\n<li>Pin pitch:1.27mm</li>\n</ul></p>\n<p><a href=”http://portal.fciconnect.com/Comergent//fci/drawing/20021111.pdf”>Datasheet referenced for footprint</a></p>\n<p>Example device(s):\n<ul><li>CONN_05x2</li>\n</ul></p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<h3>SparkFun Electronics' Retired foot prints</h3>\nIn this library you'll find all manner of retired footprints for resistors, capacitors, board names, ICs, etc., that are <b> no longer used</b> in our catalog.\n<br>\n<br>\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. \n<br>\n<br>If you enjoy using this library, please buy one of our products at <a href=\" www.sparkfun.com\">SparkFun.com</a>.\n<br>\n<br>\n<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n<br>\n<br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\nSolder jumper, small, shorted with trace. No paste layer. Trace is cuttable.\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\nnrf52840 module by holyiot\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nGenerated from <b>BLE-LORA-Relay-30dbm-v2.0.sch</b><p>\nby exp-lbrs.ulp\n\n\n<B>Small Outline Narrow Plastic Gull Wing</B><p>\n150-mil body, package type SN\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\nIPC SO8\nJEDEC MS-012 AA\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>Resistors, Capacitors, Inductors</b><p>\nBased on the previous libraries:\n<ul>\n<li>r.lbr\n<li>cap.lbr \n<li>cap-fe.lbr\n<li>captant.lbr\n<li>polcap.lbr\n<li>ipc-smd.lbr\n</ul>\nAll SMD packages are defined according to the IPC specifications and CECC<p>\n<author>Created by librarian@cadsoft.de</author><p>\n<p>\nfor Electrolyt Capacitors see also :<p>\nwww.bccomponents.com <p>\nwww.panasonic.com<p>\nwww.kemet.com<p>\nhttp://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>\n<p>\nfor trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>\n\n<table border=0 cellspacing=0 cellpadding=0 width=\"100%\" cellpaddding=0>\n<tr valign=\"top\">\n\n<! <td width=\"10\">&nbsp;</td>\n<td width=\"90%\">\n\n<b><font color=\"#0000FF\" size=\"4\">TRIM-POT CROSS REFERENCE</font></b>\n<P>\n<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">BOURNS</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">BI&nbsp;TECH</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">DALE-VISHAY</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">PHILIPS/MEPCO</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">MURATA</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">PANASONIC</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">SPECTROL</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">MILSPEC</FONT>\n </B>\n </TD><TD>&nbsp;</TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >\n 3005P<BR>\n 3006P<BR>\n 3006W<BR>\n 3006Y<BR>\n 3009P<BR>\n 3009W<BR>\n 3009Y<BR>\n 3057J<BR>\n 3057L<BR>\n 3057P<BR>\n 3057Y<BR>\n 3059J<BR>\n 3059L<BR>\n 3059P<BR>\n 3059Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 89P<BR>\n 89W<BR>\n 89X<BR>\n 89PH<BR>\n 76P<BR>\n 89XH<BR>\n 78SLT<BR>\n 78L&nbsp;ALT<BR>\n 56P&nbsp;ALT<BR>\n 78P&nbsp;ALT<BR>\n T8S<BR>\n 78L<BR>\n 56P<BR>\n 78P<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n T18/784<BR>\n 783<BR>\n 781<BR>\n -<BR>\n -<BR>\n -<BR>\n 2199<BR>\n 1697/1897<BR>\n 1680/1880<BR>\n 2187<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 8035EKP/CT20/RJ-20P<BR>\n -<BR>\n RJ-20X<BR>\n -<BR>\n -<BR>\n -<BR>\n 1211L<BR>\n 8012EKQ&nbsp;ALT<BR>\n 8012EKR&nbsp;ALT<BR>\n 1211P<BR>\n 8012EKJ<BR>\n 8012EKL<BR>\n 8012EKQ<BR>\n 8012EKR<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 2101P<BR>\n 2101W<BR>\n 2101Y<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 2102L<BR>\n 2102S<BR>\n 2102Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n EVMCOG<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 43P<BR>\n 43W<BR>\n 43Y<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 40L<BR>\n 40P<BR>\n 40Y<BR>\n 70Y-T602<BR>\n 70L<BR>\n 70P<BR>\n 70Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n RT/RTR12<BR>\n RT/RTR12<BR>\n RT/RTR12<BR>\n -<BR>\n RJ/RJR12<BR>\n RJ/RJR12<BR>\n RJ/RJR12<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3250L<BR>\n 3250P<BR>\n 3250W<BR>\n 3250X<BR>\n 3252P<BR>\n 3252W<BR>\n 3252X<BR>\n 3260P<BR>\n 3260W<BR>\n 3260X<BR>\n 3262P<BR>\n 3262W<BR>\n 3262X<BR>\n 3266P<BR>\n 3266W<BR>\n 3266X<BR>\n 3290H<BR>\n 3290P<BR>\n 3290W<BR>\n 3292P<BR>\n 3292W<BR>\n 3292X<BR>\n 3296P<BR>\n 3296W<BR>\n 3296X<BR>\n 3296Y<BR>\n 3296Z<BR>\n 3299P<BR>\n 3299W<BR>\n 3299X<BR>\n 3299Y<BR>\n 3299Z<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66X&nbsp;ALT<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66X&nbsp;ALT<BR>\n -<BR>\n 64W&nbsp;ALT<BR>\n -<BR>\n 64P&nbsp;ALT<BR>\n 64W&nbsp;ALT<BR>\n 64X&nbsp;ALT<BR>\n 64P<BR>\n 64W<BR>\n 64X<BR>\n 66X&nbsp;ALT<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66P<BR>\n 66W<BR>\n 66X<BR>\n 67P<BR>\n 67W<BR>\n 67X<BR>\n 67Y<BR>\n 67Z<BR>\n 68P<BR>\n 68W<BR>\n 68X<BR>\n 67Y&nbsp;ALT<BR>\n 67Z&nbsp;ALT<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 5050<BR>\n 5091<BR>\n 5080<BR>\n 5087<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n T63YB<BR>\n T63XB<BR>\n -<BR>\n -<BR>\n -<BR>\n 5887<BR>\n 5891<BR>\n 5880<BR>\n -<BR>\n -<BR>\n -<BR>\n T93Z<BR>\n T93YA<BR>\n T93XA<BR>\n T93YB<BR>\n T93XB<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 8026EKP<BR>\n 8026EKW<BR>\n 8026EKM<BR>\n 8026EKP<BR>\n 8026EKB<BR>\n 8026EKM<BR>\n 1309X<BR>\n 1309P<BR>\n 1309W<BR>\n 8024EKP<BR>\n 8024EKW<BR>\n 8024EKN<BR>\n RJ-9P/CT9P<BR>\n RJ-9W<BR>\n RJ-9X<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3103P<BR>\n 3103Y<BR>\n 3103Z<BR>\n 3103P<BR>\n 3103Y<BR>\n 3103Z<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3105P/3106P<BR>\n 3105W/3106W<BR>\n 3105X/3106X<BR>\n 3105Y/3106Y<BR>\n 3105Z/3105Z<BR>\n 3102P<BR>\n 3102W<BR>\n 3102X<BR>\n 3102Y<BR>\n 3102Z<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMCBG<BR>\n EVMCCG<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 55-1-X<BR>\n 55-4-X<BR>\n 55-3-X<BR>\n 55-2-X<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 50-2-X<BR>\n 50-4-X<BR>\n 50-3-X<BR>\n -<BR>\n -<BR>\n -<BR>\n 64P<BR>\n 64W<BR>\n 64X<BR>\n 64Y<BR>\n 64Z<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RJ/RJR22<BR>\n RJ/RJR22<BR>\n RJ/RJR22<BR>\n RT/RTR26<BR>\n RT/RTR26<BR>\n RT/RTR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RT/RTR24<BR>\n RT/RTR24<BR>\n RT/RTR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3323P<BR>\n 3323S<BR>\n 3323W<BR>\n 3329H<BR>\n 3329P<BR>\n 3329W<BR>\n 3339H<BR>\n 3339P<BR>\n 3339W<BR>\n 3352E<BR>\n 3352H<BR>\n 3352K<BR>\n 3352P<BR>\n 3352T<BR>\n 3352V<BR>\n 3352W<BR>\n 3362H<BR>\n 3362M<BR>\n 3362P<BR>\n 3362R<BR>\n 3362S<BR>\n 3362U<BR>\n 3362W<BR>\n 3362X<BR>\n 3386B<BR>\n 3386C<BR>\n 3386F<BR>\n 3386H<BR>\n 3386K<BR>\n 3386M<BR>\n 3386P<BR>\n 3386S<BR>\n 3386W<BR>\n 3386X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 25P<BR>\n 25S<BR>\n 25RX<BR>\n 82P<BR>\n 82M<BR>\n 82PA<BR>\n -<BR>\n -<BR>\n -<BR>\n 91E<BR>\n 91X<BR>\n 91T<BR>\n 91B<BR>\n 91A<BR>\n 91V<BR>\n 91W<BR>\n 25W<BR>\n 25V<BR>\n 25P<BR>\n -<BR>\n 25S<BR>\n 25U<BR>\n 25RX<BR>\n 25X<BR>\n 72XW<BR>\n 72XL<BR>\n 72PM<BR>\n 72RX<BR>\n -<BR>\n 72PX<BR>\n 72P<BR>\n 72RXW<BR>\n 72RXL<BR>\n 72X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n T7YB<BR>\n T7YA<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n TXD<BR>\n TYA<BR>\n TYP<BR>\n -<BR>\n TYD<BR>\n TX<BR>\n -<BR>\n 150SX<BR>\n 100SX<BR>\n 102T<BR>\n 101S<BR>\n 190T<BR>\n 150TX<BR>\n 101<BR>\n -<BR>\n -<BR>\n 101SX<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ET6P<BR>\n ET6S<BR>\n ET6X<BR>\n RJ-6W/8014EMW<BR>\n RJ-6P/8014EMP<BR>\n RJ-6X/8014EMX<BR>\n TM7W<BR>\n TM7P<BR>\n TM7X<BR>\n -<BR>\n 8017SMS<BR>\n -<BR>\n 8017SMB<BR>\n 8017SMA<BR>\n -<BR>\n -<BR>\n CT-6W<BR>\n CT-6H<BR>\n CT-6P<BR>\n CT-6R<BR>\n -<BR>\n CT-6V<BR>\n CT-6X<BR>\n -<BR>\n -<BR>\n 8038EKV<BR>\n -<BR>\n 8038EKX<BR>\n -<BR>\n -<BR>\n 8038EKP<BR>\n 8038EKZ<BR>\n 8038EKW<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n 3321H<BR>\n 3321P<BR>\n 3321N<BR>\n 1102H<BR>\n 1102P<BR>\n 1102T<BR>\n RVA0911V304A<BR>\n -<BR>\n RVA0911H413A<BR>\n RVG0707V100A<BR>\n RVA0607V(H)306A<BR>\n RVA1214H213A<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3104B<BR>\n 3104C<BR>\n 3104F<BR>\n 3104H<BR>\n -<BR>\n 3104M<BR>\n 3104P<BR>\n 3104S<BR>\n 3104W<BR>\n 3104X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n EVMQ0G<BR>\n EVMQIG<BR>\n EVMQ3G<BR>\n EVMS0G<BR>\n EVMQ0G<BR>\n EVMG0G<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMK4GA00B<BR>\n EVM30GA00B<BR>\n EVMK0GA00B<BR>\n EVM38GA00B<BR>\n EVMB6<BR>\n EVLQ0<BR>\n -<BR>\n EVMMSG<BR>\n EVMMBG<BR>\n EVMMAG<BR>\n -<BR>\n -<BR>\n EVMMCS<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMM1<BR>\n -<BR>\n -<BR>\n EVMM0<BR>\n -<BR>\n -<BR>\n EVMM3<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n 62-3-1<BR>\n 62-1-2<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 67R<BR>\n -<BR>\n 67P<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 67X<BR>\n 63V<BR>\n 63S<BR>\n 63M<BR>\n -<BR>\n -<BR>\n 63H<BR>\n 63P<BR>\n -<BR>\n -<BR>\n 63X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n RJ/RJR50<BR>\n RJ/RJR50<BR>\n RJ/RJR50<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n</TABLE>\n<P>&nbsp;<P>\n<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>\n <TR>\n <TD COLSPAN=7>\n <FONT color=\"#0000FF\" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>\n <P>\n <FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3224G<BR>\n 3224J<BR>\n 3224W<BR>\n 3269P<BR>\n 3269W<BR>\n 3269X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 44G<BR>\n 44J<BR>\n 44W<BR>\n 84P<BR>\n 84W<BR>\n 84X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n ST63Z<BR>\n ST63Y<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n ST5P<BR>\n ST5W<BR>\n ST5X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=7>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=7>\n <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3314G<BR>\n 3314J<BR>\n 3364A/B<BR>\n 3364C/D<BR>\n 3364W/X<BR>\n 3313G<BR>\n 3313J<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 23B<BR>\n 23A<BR>\n 21X<BR>\n 21W<BR>\n -<BR>\n 22B<BR>\n 22A<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ST5YL/ST53YL<BR>\n ST5YJ/5T53YJ<BR>\n ST-23A<BR>\n ST-22B<BR>\n ST-22<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ST-4B<BR>\n ST-4A<BR>\n -<BR>\n -<BR>\n -<BR>\n ST-3B<BR>\n ST-3A<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n EVM-6YS<BR>\n EVM-1E<BR>\n EVM-1G<BR>\n EVM-1D<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n G4B<BR>\n G4A<BR>\n TR04-3S1<BR>\n TRG04-2S1<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n DVR-43A<BR>\n CVR-42C<BR>\n CVR-42A/C<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n</TABLE>\n<P>\n<FONT SIZE=4 FACE=ARIAL><B>ALT =&nbsp;ALTERNATE</B></FONT>\n<P>\n\n&nbsp;\n<P>\n</td>\n</tr>\n</table>\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n<h3>GeekAmmo Library</h3>\n\nThese are parts used by the GeekAmmo company (now part of SparkFun Electronics)!\n\n If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n<br><br>\n<b>Licensing:</b>Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/\n<br><br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>0603<b><p>\n\n\n\n\n\n\n>NAME\n>VALUE\n>name\n\n\n\n\n\n<h3>SparkFun Electronics' preferred foot prints</h3>\nIn this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.<br><br>\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n<br><br>\n<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n<br><br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nGenerated from <b>LoRa-Messenger-v1.0.sch</b><p>\nby exp-lbrs.ulp\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>SMALL OUTLINE INTEGRATED CIRCUIT</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>Jumpers</b><p>\n<author>Created by librarian@cadsoft.de</author>\n\n\n<b>Solder jumper</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<h3>SparkFun Aesthetics</h3>\nThis library contiains non-functional items such as logos, build/ordering notes, frame blocks, etc. \n<br>\n<br>\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. \n<br>\n<br>If you enjoy using this library, please buy one of our products at <a href=\" www.sparkfun.com\">SparkFun.com</a>.\n<br>\n<br>\n<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n<br>\n<br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n<h3>Open-Source Hardware (OSHW) Logo - Medium - Silkscreen</h3>\n<p>Silkscreen logo for open-source hardware designs.</p>\n<p>Devices using:\n<ul><li>OSHW_LOGO</li></ul></p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>EAGLE Design Rules</b>\n<p>\nDie Standard-Design-Rules sind so gewählt, dass sie für \ndie meisten Anwendungen passen. Sollte ihre Platine \nbesondere Anforderungen haben, treffen Sie die erforderlichen\nEinstellungen hier und speichern die Design Rules unter \neinem neuen Namen ab.\n<b>EAGLE Design Rules</b>\n<p>\nThe default Design Rules have been set to cover\na wide range of applications. Your particular design\nmay have different requirements, so please make the\nnecessary adjustments and save your customized\ndesign rules under a new name.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nSince Version 6.2.2 text objects can contain more than one line,\nwhich will not be processed correctly with this version.\n\n\nSince Version 8.2, EAGLE supports online libraries. The ids\nof those online libraries will not be understood (or retained)\nwith this version.\n\n\nSince Version 8.3, EAGLE supports URNs for individual library\nassets (packages, symbols, and devices). The URNs of those assets\nwill not be understood (or retained) with this version.\n\n\nSince Version 8.3, EAGLE supports the association of 3D packages\nwith devices in libraries, schematics, and board files. Those 3D\npackages will not be understood (or retained) with this version.\n\n\n\n" }, { "path": "Q10 Lora Communicator/Hardware/eagle/LoRa-Messenger-v1.1.sch", "content": "\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2>\n\n<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p>\n\n<h3>Obligatory Warning</h3>\n<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p>\n\n<h3>License</h3>\n<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p>\n<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n</p>\n\n\n<b>Small Outline Transistor</b> - 5 Pin\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n<b>SMA Surface Mount Diode</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n<b>SOT23</b> - Reflow soldering\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\nSOD-523 (0.8x1.2mm)\n\n<p>Source: http://www.rohm.com/products/databook/di/pdf/rb751s-40.pdf</p>\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>SOD323</b> (2.5x1.2mm)\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>SOD-123</b>\n<p>Source: http://www.diodes.com/datasheets/ds30139.pdf</p>\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n<b>SMALL OUTLINE TRANSISTOR</b><p>\nTS-003\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n0603-Mini\n<p>Mini footprint for dense boards</p>\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b> 0402</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>0402 MicroPitch<p>\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>0603</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>0603 MicroPitch</b>\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>0805</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>0805 MicroPitch</b>\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CHIPLED 1206</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\nA\nC\n\n\n\n\n\n\n\n\n\n\n<b>CHIPLED 0805</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\nA\nC\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>CHIPLED 0603</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\nA\nC\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<p>Source: http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/XLampXPE2.pdf</p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<p>PLCC2 - Reverse Mount</p>\n<p>Source: http://catalog.osram-os.com/media/_en/Graphics/00042122_0.pdf</p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR 2512 (Metric 6432)</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\nCourtesy: Adafruit Industries\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n<p>Source: http://ae-bst.resource.bosch.com/media/products/dokumente/bme280/BST-BME280_DS001-09.pdf</p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>Small Outline IC - 150mil Wide</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n<b>Small Outline IC - 208mil Wide</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>Small Outline Transistor</b> - 6 Pin\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n2-Pin JST PH Series Right-Angle Connector (+/- for batteries)\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n-\n+\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n>VALUE\n\n\n\n>VALUE\n\n\n\n\n\n\n\n>VALUE\n\n\n\n>VALUE\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>VALUE\n>NAME\nD\nS\nG\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nSD & MMC\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\nBME280 Digital\nEnviron. Sensor\n\n\n\nVDD:\n1.8-3.6V\nTemp:\n-40~85°C\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nAP3602\n>NAME\n\n\n\n\n>VALUE\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>GND</b>\n\n\n\n\n\n\n\n\n\n\n\n\n<p>VBUS Supply Symbole</p>\n\n\n\n\n\n\n\n\n\n\n\n\n<b>3.3V Supply</b>\n\n\n\n\n\n\n\n\n\n\n\n\nVBAT Supply Sumbol\n\n\n\n\n\n\n\n\n\n\n\n\n<p><b>SOT23-5 Fixed Voltage Regulators</b></p>\n<p></p>\n<table width=\"700\">\n<tr bgcolor=\"#EEEEEE\" >\n<td><b>Part</b></td>\n<td><b>Current Out</b></td>\n<td><b>V Out</b></td>\n<td><b>V In</b></td>\n<td><b>V Dropout</b></td>\n<td><b>θJA (°C/W)</b></td>\n<td><b>TJ (°C)</b></td>\n<td><b>Digikey Part No.</b></td>\n</tr>\n<tr>\n <td>ADP121</td>\n <td>150mA</td>\n <td><b>3.3V</b></td>\n <td>3.4-5.5V</td>\n <td>0.09V @ 150mA</td>\n <td>--</td>\n <td>--</td>\n <td>ADP121-AUJZ33R7CT-ND</td>\n</tr>\n<tr>\n <td>ADP121</td>\n <td>150mA</td>\n <td><b>3.0V</b></td>\n <td>3.1-5.5V</td>\n <td>0.09V @ 150mA</td>\n <td>--</td>\n <td>--</td>\n <td>ADP121-AUJZ30R7CT-ND</td>\n</tr>\n<tr>\n <td>ADP122</td>\n <td><strong>300mA</strong></td>\n <td><b>3.3V</b></td>\n <td>3.4-5.5V</td>\n <td>0.085V @ 300mA</td>\n <td>--</td>\n <td>--</td>\n <td>ADP122AUJZ-3.3-R7CT-ND</td>\n</tr>\n<tr>\n <td>ADP1712</td>\n <td><strong>300mA</strong></td>\n <td><b>3.3V</b></td>\n <td>3.5-5.5V</td>\n <td>0.17V @ 300mA</td>\n <td>--</td>\n <td>--</td>\n <td>ADP1712AUJZ-3.3-R7TR-ND</td>\n</tr>\n<tr>\n <td>AP7311 (<b>Low Cost</b>)</td>\n <td>150mA</td>\n <td><b>3.3V</b></td>\n <td>3.5-6V</td>\n <td>0.15V @ 150mA</td>\n <td>--</td>\n <td>--</td>\n <td>AP7311-33WG-7DICT-ND</td>\n</tr>\n\n<tr>\n <td>LD39015M18R</td>\n <td>150mA</td>\n <td><b>1.8V</b></td>\n <td>1.9V-5.5V</td>\n <td>0.08V @ 100mA</td>\n <td>--</td>\n <td>--</td>\n <td>497-6977-1-ND</td>\n</tr>\n\n<tr>\n <td>LP2985A-33DBVR</td>\n <td>150mA</td>\n <td><b>3.3V</b></td>\n <td>3.3-16V</td>\n <td>0.28V @ 150mA</td>\n <td>206</td>\n <td>150</td>\n <td>296-18479-1-ND</td>\n</tr>\n\n<tr>\n <td>MCP1824T-3302E/OT</td>\n <td><b>300mA</b></td>\n <td><b>3.3V</b></td>\n <td>3.5V-6V</td>\n <td>0.2V @ 300mA</td>\n <td>--</td>\n <td>--</td>\n <td>MCP1824T-3302E/OTCT-ND</td>\n</tr>\n\n<tr>\n <td>MIC5205-2.5YM5 TR</td>\n <td>150mA</td>\n <td><b>2.5V</b></td>\n <td>2.7-16V</td>\n <td>0.165V @ 150mA</td>\n <td>--</td>\n <td>--</td>\n <td>576-1257-2-ND</td>\n</tr>\n<tr>\n <td>MIC5205-3.0YM5 TR</td>\n <td>150mA</td>\n <td><b>3.0V</b></td>\n <td>3.2V-16V</td>\n <td>0.165V @ 150mA</td>\n <td>--</td>\n <td>--</td>\n <td>576-1258-2-ND</td>\n</tr>\n<tr>\n <td>MIC5205-3.3YM5 TR</td>\n <td>150mA</td>\n <td><b>3.3V</b></td>\n <td>3.5V-16V</td>\n <td>0.165V @ 150mA</td>\n <td>--</td>\n <td>--</td>\n <td>576-1259-2-ND</td>\n</tr>\n<tr>\n <td>TPS780330220</td>\n <td>150mA</td>\n <td><b>3.3V+2.2V</b></td>\n <td>3.6-5.5V</td>\n <td>250mV Max</td>\n <td>--</td>\n <td>--</td>\n <td>296-23332-1-ND</td>\n</tr>\n<tr>\n <td>TDA3663/N1,135</td>\n <td>100mA</td>\n <td><b>3.3V</b></td>\n <td>3.5-<b>45V</b></td>\n <td>0.18V @ 50mA</td>\n <td>--</td>\n <td>--</td>\n <td>568-5343-1-ND</td>\n</tr>\n<tr>\n <td></td>\n <td></td>\n <td></td>\n <td></td>\n <td></td>\n <td></td>\n <td></td>\n <td></td>\n</tr>\n<tr>\n <td></td>\n <td></td>\n <td></td>\n <td></td>\n <td></td>\n <td></td>\n <td></td>\n <td></td>\n</tr>\n\n</table>\n<p>Max operating temp can be calculated using θJA, TJ (max junction temperature), and power in watts. Set the \"Maximum Ambient Temperature\" until it reaches TJ (\"Max Junction Temperature\"), which is the absolute limit for safe use of the regulator: <a href=\"http://www.daycounter.com/Calculators/Heat-Sink-Temperature-Calculator.phtml\">Heat Sink Temperature Calculator</a></p>\n<p>For example, With 12V source into a 3.3V LP2985 and a 30mA load, we are dissipating (12V-3.3V) * 0.03A = 0.261W. With a θJA of 206 °C/W, a TJ of 150°C, and 261mW we can safely use the chip without a heat sink up to 75°C (=147.1°C Junction Temperature).</p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>P-Channel Mosfet</b>\n<p><b>LEGEND</b></p>\n<p>\n<b>VDS</b>: Voltage Drain-Source<br/>\n<b>ID</b>: Drain Current<br/>\n<b>RDS(ON)</b>: Drain-Source On-State Resistance<br/>\n<b>VGS(TH)</b>: Gate-Source Threshold Voltage<br/>\n<b>CISS</b>: Drain-Source Input Capacitance\n</p>\n<p>\n<b>SOT-23</b>\n<table border=\"0\" width=\"90%\" cellspacing=\"0\" cellpadding=\"5\">\n<tr bgcolor=\"#DDDDDD\">\n<td>Name</td>\n<td>VDS</td>\n<td>ID</td>\n<td>RDS(ON)</td>\n<td>VGS(TH)</td>\n<td>CISS</td>\n<td>Order Number</td>\n</tr>\n\n<tr>\n<td>IRLML5103</td>\n<td>30V</td>\n<td>760mA</td>\n<td>600 mOhm</td>\n<td>--</td>\n<td>75pF @ 25V</td>\n<td>Digikey: IRLML5103PBFCT-ND</td>\n</tr>\n\n<tr>\n<td>IRLML6401</td>\n<td>12V</td>\n<td>4.3A</td>\n<td>50 mOhm</td>\n<td>950mV @ 250µA</td>\n<td>830pF @ 10V</td>\n<td>Digikey: IRLML6401PBFTR-ND</td>\n</tr>\n\n<tr>\n<td>NTR0202PL</td>\n<td>20V</td>\n<td>400mA</td>\n<td>800 mOhm</td>\n<td>2.3V @ 250uA</td>\n<td>70pF @ 5V</td>\n<td>Digikey: NTR0202PLT1GOSTR-ND</td>\n</tr>\n\n<tr>\n<td>NTR4101PT1G</td>\n<td>20V</td>\n<td>1.8A</td>\n<td>85 mOhm</td>\n<td>1.2V @ 250uA</td>\n<td>675pF @ 10V</td>\n<td>Digikey: NTR4101PT1GOSCT-ND</td>\n</tr>\n\n<tr>\n<td>DMP2004K</td>\n<td>20V</td>\n<td>600mA</td>\n<td>900 mOhm</td>\n<td>1V @ 250uA</td>\n<td>175pF @ 16V</td>\n<td>Digikey: DMP2004KDICT-ND</td>\n</tr>\n\n<tr>\n<td>PMV65XP</td>\n<td>20V</td>\n<td>3.9A</td>\n<td>76 mOhm</td>\n<td>950mV @ 1mA</td>\n<td>725pF @ 20V</td>\n<td>Digikey: 568-2358-2-ND</td>\n</tr>\n\n<tr>\n<td></td>\n<td></td>\n<td></td>\n<td></td>\n<td></td>\n<td></td>\n<td></td>\n</tr>\n\n<tr>\n<td></td>\n<td></td>\n<td></td>\n<td></td>\n<td></td>\n<td></td>\n<td></td>\n</tr>\n</table>\n<b>TO-252</b>\n<table border=\"0\" width=\"90%\" cellspacing=\"0\" cellpadding=\"5\">\n<tr bgcolor=\"#DDDDDD\">\n<td>Name</td>\n<td>VDS</td>\n<td>ID</td>\n<td>RDS(ON)</td>\n<td>VGS(TH)</td>\n<td>CISS</td>\n<td>Order Number</td>\n</tr>\n\n<tr>\n<td>AOD417</td>\n<td>30V</td>\n<td>25A</td>\n<td>34 mOhm</td>\n<td>3V @ 250µA</td>\n<td>920pF @ 15V</td>\n<td>Digikey: 785-1106-2-ND</td>\n</tr>\n\n</table>\n\n<b>PowerPak</b>\n<table border=\"0\" width=\"90%\" cellspacing=\"0\" cellpadding=\"5\">\n<tr bgcolor=\"#DDDDDD\">\n<td>Name</td>\n<td>VDS</td>\n<td>ID</td>\n<td>RDS(ON)</td>\n<td>VGS(TH)</td>\n<td>CISS</td>\n<td>Order Number</td>\n</tr>\n\n\n<tr>\n<td>AON7401</td>\n<td>30V</td>\n<td>12A</td>\n<td>14 mOhm</td>\n<td>3V @ 250µA</td>\n<td>2600pF @ 15V</td>\n<td>Digikey: 785-1302-1-ND</td>\n</tr>\n\n\n</p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<p><b>Ceramic Capacitors</b></p>\n<p>For new designs, use the packages preceded by an '_' character since they are more reliable:</p>\n<p>The following footprints should be used on most boards:</p>\n<ul>\n<li><b>_0402</b> - Standard footprint for regular board layouts</li>\n<li><b>_0603</b> - Standard footprint for regular board layouts</li>\n<li><b>_0805</b> - Standard footprint for regular board layouts</li>\n<li><b>_1206</b> - Standard footprint for regular board layouts</li>\n</ul>\n<p>For extremely tight-pitch boards where space is at a premium, the following 'micro-pitch' footprints can be used (smaller pads, no silkscreen outline, etc.):</p>\n<ul>\n<li><b>_0402MP</b> - Micro-pitch footprint for very dense/compact boards</li>\n<li><b>_0603MP</b> - Micro-pitch footprint for very dense/compact boards</li>\n<li><b>_0805MP</b> - Micro-pitch footprint for very dense/compact boards</li>\n<li><b>_1206MP</b> - Micro-pitch footprint for very dense/compact boards</li>\n</ul>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<p><b>LED</b></p>\n<b>0603</b> - 0603 Surface Mount Package\n<hr>\n<p><b><u>2mA:</u></b></p>\n<ul>\n<li>Green LED - Low Power (3.9mcd, 2ma, 1.7Vf) - Digikey: 475-2709-2-ND</li>\n<li>Orange LED - Low Power (9.8mcd, 2ma, 1.8Vf) - Digikey: 475-1194-2-ND</li>\n<li>Red LED - Low Power (5mcd, 2ma, 1.8Vf) - Digikey: 475-1195-2-ND</li>\n<li>Yellow LED - Low Power (7mcd, 2ma, 1.8Vf) - Digikey: 475-1196-2-ND</li>\n</ul>\n<p><b><u>5mA:</u></b></p>\n<ul>\n<li>Blue LED - Low Power (17mcd, 5ma, 2.9Vf) - Digikey: LNJ937W8CRACT-ND</li>\n</ul>\n<b>0805</b> - 0805 Surface Mount Package\n<hr>\n<p><b><u>2mA:</u></b></p>\n<ul>\n<li>Red LED (8.8mcd, 2mA, 1.8Vf, Clear) - Low Power [Digikey: 475-2510-1-ND]</li>\n<li>Green LED (5mcd, 2mA, 1.8Vf, Clear) - Low Power [Digikey: 475-2730-1-ND]</li>\n<li>Yellow LED (11.3mcd, 2mA, 1.8Vf, Clear) - Low Power [Digikey: 475-2555-1-ND]</li>\n</ul>\n<p><b><u>20mA:</u></b></p>\n<ul>\n<li>Red LED (104mcd, 20mA, Diffused) - LS R976 [Digikey: 475-1278-6-ND]</li>\n<li>Red LED (12mcd, 20mA, 2.0Vf, Clear) - APT2012EC [Digikey: 754-1128-1-ND]</li>\n<li>Green LED (15mcd, 20mA, 2.2Vf, Clear) - APT2012GC [Digikey: 754-1131-1-ND]</li>\n<li>Orange LED (160mcd, 20mA, 2.1Vf, Clear) - APT2012SECK [Digikey: 754-1130-1-ND]</li>\n</ul>\n<li><b>1206</b> - 1206 Surface Mount Package\n<hr>\n<ul>\n<li>Green LED (26mcd, 20mA, Diffused) - LG N971 [Digikey: 475-1407-6-ND]</li>\n<li>Red LED (15mcd, 20mA, Diffused) - LH N974 [Digikey: 475-1416-6-ND]</li>\n</ul>\n\n<li><b>Cree</b> - Cree High-Power Surface Mount LEDs\n<hr>\n<ul>\n<li>XPEBWT-L1-0000-00D50 - White 111lm 350mA 2.9Vf 6200K 110°</li>\n<li>XTEAWT-00-0000-00000LEE3 - White 114lm 350mA 2.85Vf 5000K 115°</li>\n</ul>\n\n<li><b>Everlight</b> - Everlight 45-21 Series Surface Mount LEDs\n<hr>\n<ul>\n<li>45-21/QK2C-B2832AC2CB2/2T - Warm White 2000mcd 20mA 3.25Vf 3050K 120°</li>\n<li>45-21/LK2C-B38452C4CB2/2T - Nuetral White 2000mcd 20mA 3.25Vf 4150K 120°</li>\n<li>45-21/LK2C-B50634C6CB2/2T - Cold White 2200mcd 20mA 3.25Vf 5650K 120°</li>\n</ul>\n\n<li><b>PLCC2 Reverse Mount</b>\n<hr>\n<ul>\n<li>LS T77K-J1L2-1-0-2-R18-Z - Red 11.25mcd 2mA 1.8Vf 630nm 120°</li>\n<li>LO T77K-L1M2-24-Z - Orange 19.6mcd 2mA 1.8Vf 606nm 120°</li>\n<li>LY T77K-K2M1-26-Z - Yellow 15.7mcd 2mA 1.8Vf 587nm 120°</li>\n</ul>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<p><b>Resistors</b></p>\n<p>For new designs, use the packages preceded by an '_' character since they are more reliable:</p>\n<p>The following footprints should be used on most boards:</p>\n<ul>\n<li><b>_0402</b> - Standard footprint for regular board layouts</li>\n<li><b>_0603</b> - Standard footprint for regular board layouts</li>\n<li><b>_0805</b> - Standard footprint for regular board layouts</li>\n<li><b>_1206</b> - Standard footprint for regular board layouts</li>\n</ul>\n<p>For extremely tight-pitch boards where space is at a premium, the following 'micro-pitch' footprints can be used (smaller pads, no silkscreen outline, etc.):</p>\n<ul>\n<li><b>_0402MP</b> - Micro-pitch footprint for very dense/compact boards</li>\n<li><b>_0603MP</b> - Micro-pitch footprint for very dense/compact boards</li>\n<li><b>_0805MP</b> - Micro-pitch footprint for very dense/compact boards</li>\n<li><b>_1206MP</b> - Micro-pitch footprint for very dense/compact boards</li>\n</ul>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>MicroSD/Transflash Card Holder with SPI pinout</b>\n<p>3M: 2908-05WB-MG<br/>4UConnector: 19656</p>\n<p>Footprint courtesy: Adafruit Industries</p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<p><b>BME280</b> - Environmental Sensor (I2C + SPI)</p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>SOIC8 SPI Flash</b>\n<p>Be careful with the size since SOIC8 flash comes in several 'widths'</p>\n<p><b>SOIC8 150 mil</b>\n<ul>\n<li><b>M25P16</b> - 16Mbit (2Mbit x 8) Serial Flash (75MHz SPI Bus), Supply: 2.7-3.6V <br/><b>Digikey: </b> SOIC8 - M25P16-VMN6P-ND</li>\n</ul>\n</p>\n\n<p><b>SOIC8 208 mil</b>\n<ul>\n<li><b>W25Q16BVSSIG</b> - 16Mbit (2Mbit x 8) Serial Flash (104MHz SPI Bus), Supply: 2.7-3.6V <br/><b>Digikey: </b> SOIC8 - W25Q16BVSSIG-ND</li>\n</ul>\n</p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>5.0V Supply</b>\n\n\n\n\n\n\n\n\n\n\n\n\nJST 2-Pin Right-Angle Connector\n<ul>\n<li>PH-Series - 4UConnector: 17311</li>\n<li>SH-Series - 4UConnector: 07278</li>\n</ul>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>SparkFun Electronics' preferred foot prints</h3>\nIn this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br>\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n<br><br>\n<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n<br><br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n2mm SMD side-entry connector. tDocu layer indicates the actual physical plastic housing. +/- indicate SparkFun standard batteries and wiring.\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. \nYou may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). \nThis slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a \"brace\" \nto hold the component in place. 0.005 has proven to be the perfect amount of \"off-center\" position when using our standard breakaway headers.\nAlthough looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,\nif you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment \nwill be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n>Name\n>Value\n+\n-\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n+\n-\n\n\n<H3>JST-2-PTH-KIT</h3>\n2-Pin JST, through-hole connector<br>\n<br>\n<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n+\n-\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n+\n-\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>Plated Through Hole - 2x5 ARM Cortex Debug Connector (10-pin)</h3>\n<p>tDoc (51) layer border represents maximum dimensions of plastic housing.</p>\n<p>Specifications:\n<ul><li>Pin count:10</li>\n<li>Pin pitch:1.27mm</li>\n</ul></p>\n<p><a href=”http://portal.fciconnect.com/Comergent//fci/drawing/20021111.pdf”>Datasheet referenced for footprint</a></p>\n<p>Example device(s):\n<ul><li>CONN_05x2</li>\n</ul></p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<h3>Plated Through Hole - 2x5 ARM Cortex Debug Connector (10-pin)</h3>\n<p>tDoc (51) layer border represents maximum dimensions of plastic housing.</p>\n<p>Specifications:\n<ul><li>Pin count:10</li>\n<li>Pin pitch:1.27mm</li>\n</ul></p>\n<p><a href=”http://portal.fciconnect.com/Comergent//fci/drawing/20021111.pdf”>Datasheet referenced for footprint</a></p>\n<p>Example device(s):\n<ul><li>CONN_05x2</li>\n</ul></p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\nShrouded SMD connector for JTAG and SWD applications.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>VALUE\n>NAME\n\n\n\n\n<h3>USB - C 16 Pin</h3>\nExposes the minimal pins needed to implement a USB 2.x legacy device.\n\n\n\nUSB-C\n>VALUE\n\n>NAME\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\nStandard 2-pin 0.1\" header. Use with <br>\n- straight break away headers ( PRT-00116)<br>\n- right angle break away headers (PRT-00553)<br>\n- swiss pins (PRT-00743)<br>\n- machine pins (PRT-00117)<br>\n- female headers (PRT-00115)<br><br>\n\n Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>\n\n2.54_SCREWTERM for use with PRT-10571.<br><br>\n\n3.5mm Screw Terminal footprints for PRT-08084<br><br>\n\n5mm Screw Terminal footprints for use with PRT-08432\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>USB Type C 16Pin Connector</h3>\n\nSuper Speed pins not available on the 16-pin purely SMD connector so this part is best for USB 2.0 implementations. D1 and D2 are tied together enabling D+/- no matter which way the cable is plugged into the connector. The two channel configuration pins (CC1/2) are exposed. These are normally connected to ground via 5.1k resistors but can be reconfigured for high current/high power applications.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>Cortex Debug Connector - 10 pin</h3>\n<p>Supports JTAG debug, Serial Wire debug, and Serial Wire Viewer.\nPTH and SMD connector options available.</p>\n<p> <ul><a href=”http://infocenter.arm.com/help/topic/com.arm.doc.faqs/attached/13634/cortex_debug_connectors.pdf”>General Connector Information</a>\n<p><b> Products:</b>\n<ul><li><a href=”http://www.digikey.com/product-detail/en/cnc-tech/3220-10-0100-00/1175-1627-ND/3883661”>PTH Connector</a> -via Digi-Key</li>\n<li><a href=”https://www.sparkfun.com/products/13229”>SparkFun PSoc</a></li>\n<li><a href=”https://www.sparkfun.com/products/13810”>SparkFun T</a></li>\n</ul></p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>SparkFun Electronics' preferred foot prints</h3>\nIn this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.<br><br>\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n<br><br>\n<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n<br><br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n\n>VALUE\n\n\n\n\n\n<b>SUPPLY SYMBOL</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>Value\n>Name\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>SparkFun Electronics' preferred foot prints</h3>\nIn this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n<br><br>\n<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n<br><br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>CAPACITOR</b><p>\nchip\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\nCTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<h3>CAP-PTH-SMALL-KIT</h3>\nCommonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br>\n<br>\n<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nThis is the \"EZ\" version of the .1\" spaced ceramic thru-hole cap.<br>\nIt has reduced top mask to make it harder to put the component on the wrong side of the board.\n\n\n\n\n\n\n\n>Name\n>Value\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\nCAP-00868\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>Capacitor</b>\nStandard 0603 ceramic capacitor, and 0.1\" leaded capacitor.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>Resistors, Capacitors, Inductors</b><p>\nBased on the previous libraries:\n<ul>\n<li>r.lbr\n<li>cap.lbr \n<li>cap-fe.lbr\n<li>captant.lbr\n<li>polcap.lbr\n<li>ipc-smd.lbr\n</ul>\nAll SMD packages are defined according to the IPC specifications and CECC<p>\n<author>Created by librarian@cadsoft.de</author><p>\n<p>\nfor Electrolyt Capacitors see also :<p>\nwww.bccomponents.com <p>\nwww.panasonic.com<p>\nwww.kemet.com<p>\nhttp://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>\n<p>\nfor trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>\n\n<table border=0 cellspacing=0 cellpadding=0 width=\"100%\" cellpaddding=0>\n<tr valign=\"top\">\n\n<! <td width=\"10\">&nbsp;</td>\n<td width=\"90%\">\n\n<b><font color=\"#0000FF\" size=\"4\">TRIM-POT CROSS REFERENCE</font></b>\n<P>\n<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">BOURNS</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">BI&nbsp;TECH</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">DALE-VISHAY</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">PHILIPS/MEPCO</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">MURATA</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">PANASONIC</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">SPECTROL</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">MILSPEC</FONT>\n </B>\n </TD><TD>&nbsp;</TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >\n 3005P<BR>\n 3006P<BR>\n 3006W<BR>\n 3006Y<BR>\n 3009P<BR>\n 3009W<BR>\n 3009Y<BR>\n 3057J<BR>\n 3057L<BR>\n 3057P<BR>\n 3057Y<BR>\n 3059J<BR>\n 3059L<BR>\n 3059P<BR>\n 3059Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 89P<BR>\n 89W<BR>\n 89X<BR>\n 89PH<BR>\n 76P<BR>\n 89XH<BR>\n 78SLT<BR>\n 78L&nbsp;ALT<BR>\n 56P&nbsp;ALT<BR>\n 78P&nbsp;ALT<BR>\n T8S<BR>\n 78L<BR>\n 56P<BR>\n 78P<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n T18/784<BR>\n 783<BR>\n 781<BR>\n -<BR>\n -<BR>\n -<BR>\n 2199<BR>\n 1697/1897<BR>\n 1680/1880<BR>\n 2187<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 8035EKP/CT20/RJ-20P<BR>\n -<BR>\n RJ-20X<BR>\n -<BR>\n -<BR>\n -<BR>\n 1211L<BR>\n 8012EKQ&nbsp;ALT<BR>\n 8012EKR&nbsp;ALT<BR>\n 1211P<BR>\n 8012EKJ<BR>\n 8012EKL<BR>\n 8012EKQ<BR>\n 8012EKR<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 2101P<BR>\n 2101W<BR>\n 2101Y<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 2102L<BR>\n 2102S<BR>\n 2102Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n EVMCOG<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 43P<BR>\n 43W<BR>\n 43Y<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 40L<BR>\n 40P<BR>\n 40Y<BR>\n 70Y-T602<BR>\n 70L<BR>\n 70P<BR>\n 70Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n RT/RTR12<BR>\n RT/RTR12<BR>\n RT/RTR12<BR>\n -<BR>\n RJ/RJR12<BR>\n RJ/RJR12<BR>\n RJ/RJR12<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3250L<BR>\n 3250P<BR>\n 3250W<BR>\n 3250X<BR>\n 3252P<BR>\n 3252W<BR>\n 3252X<BR>\n 3260P<BR>\n 3260W<BR>\n 3260X<BR>\n 3262P<BR>\n 3262W<BR>\n 3262X<BR>\n 3266P<BR>\n 3266W<BR>\n 3266X<BR>\n 3290H<BR>\n 3290P<BR>\n 3290W<BR>\n 3292P<BR>\n 3292W<BR>\n 3292X<BR>\n 3296P<BR>\n 3296W<BR>\n 3296X<BR>\n 3296Y<BR>\n 3296Z<BR>\n 3299P<BR>\n 3299W<BR>\n 3299X<BR>\n 3299Y<BR>\n 3299Z<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66X&nbsp;ALT<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66X&nbsp;ALT<BR>\n -<BR>\n 64W&nbsp;ALT<BR>\n -<BR>\n 64P&nbsp;ALT<BR>\n 64W&nbsp;ALT<BR>\n 64X&nbsp;ALT<BR>\n 64P<BR>\n 64W<BR>\n 64X<BR>\n 66X&nbsp;ALT<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66P<BR>\n 66W<BR>\n 66X<BR>\n 67P<BR>\n 67W<BR>\n 67X<BR>\n 67Y<BR>\n 67Z<BR>\n 68P<BR>\n 68W<BR>\n 68X<BR>\n 67Y&nbsp;ALT<BR>\n 67Z&nbsp;ALT<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 5050<BR>\n 5091<BR>\n 5080<BR>\n 5087<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n T63YB<BR>\n T63XB<BR>\n -<BR>\n -<BR>\n -<BR>\n 5887<BR>\n 5891<BR>\n 5880<BR>\n -<BR>\n -<BR>\n -<BR>\n T93Z<BR>\n T93YA<BR>\n T93XA<BR>\n T93YB<BR>\n T93XB<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 8026EKP<BR>\n 8026EKW<BR>\n 8026EKM<BR>\n 8026EKP<BR>\n 8026EKB<BR>\n 8026EKM<BR>\n 1309X<BR>\n 1309P<BR>\n 1309W<BR>\n 8024EKP<BR>\n 8024EKW<BR>\n 8024EKN<BR>\n RJ-9P/CT9P<BR>\n RJ-9W<BR>\n RJ-9X<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3103P<BR>\n 3103Y<BR>\n 3103Z<BR>\n 3103P<BR>\n 3103Y<BR>\n 3103Z<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3105P/3106P<BR>\n 3105W/3106W<BR>\n 3105X/3106X<BR>\n 3105Y/3106Y<BR>\n 3105Z/3105Z<BR>\n 3102P<BR>\n 3102W<BR>\n 3102X<BR>\n 3102Y<BR>\n 3102Z<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMCBG<BR>\n EVMCCG<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 55-1-X<BR>\n 55-4-X<BR>\n 55-3-X<BR>\n 55-2-X<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 50-2-X<BR>\n 50-4-X<BR>\n 50-3-X<BR>\n -<BR>\n -<BR>\n -<BR>\n 64P<BR>\n 64W<BR>\n 64X<BR>\n 64Y<BR>\n 64Z<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RJ/RJR22<BR>\n RJ/RJR22<BR>\n RJ/RJR22<BR>\n RT/RTR26<BR>\n RT/RTR26<BR>\n RT/RTR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RT/RTR24<BR>\n RT/RTR24<BR>\n RT/RTR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3323P<BR>\n 3323S<BR>\n 3323W<BR>\n 3329H<BR>\n 3329P<BR>\n 3329W<BR>\n 3339H<BR>\n 3339P<BR>\n 3339W<BR>\n 3352E<BR>\n 3352H<BR>\n 3352K<BR>\n 3352P<BR>\n 3352T<BR>\n 3352V<BR>\n 3352W<BR>\n 3362H<BR>\n 3362M<BR>\n 3362P<BR>\n 3362R<BR>\n 3362S<BR>\n 3362U<BR>\n 3362W<BR>\n 3362X<BR>\n 3386B<BR>\n 3386C<BR>\n 3386F<BR>\n 3386H<BR>\n 3386K<BR>\n 3386M<BR>\n 3386P<BR>\n 3386S<BR>\n 3386W<BR>\n 3386X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 25P<BR>\n 25S<BR>\n 25RX<BR>\n 82P<BR>\n 82M<BR>\n 82PA<BR>\n -<BR>\n -<BR>\n -<BR>\n 91E<BR>\n 91X<BR>\n 91T<BR>\n 91B<BR>\n 91A<BR>\n 91V<BR>\n 91W<BR>\n 25W<BR>\n 25V<BR>\n 25P<BR>\n -<BR>\n 25S<BR>\n 25U<BR>\n 25RX<BR>\n 25X<BR>\n 72XW<BR>\n 72XL<BR>\n 72PM<BR>\n 72RX<BR>\n -<BR>\n 72PX<BR>\n 72P<BR>\n 72RXW<BR>\n 72RXL<BR>\n 72X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n T7YB<BR>\n T7YA<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n TXD<BR>\n TYA<BR>\n TYP<BR>\n -<BR>\n TYD<BR>\n TX<BR>\n -<BR>\n 150SX<BR>\n 100SX<BR>\n 102T<BR>\n 101S<BR>\n 190T<BR>\n 150TX<BR>\n 101<BR>\n -<BR>\n -<BR>\n 101SX<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ET6P<BR>\n ET6S<BR>\n ET6X<BR>\n RJ-6W/8014EMW<BR>\n RJ-6P/8014EMP<BR>\n RJ-6X/8014EMX<BR>\n TM7W<BR>\n TM7P<BR>\n TM7X<BR>\n -<BR>\n 8017SMS<BR>\n -<BR>\n 8017SMB<BR>\n 8017SMA<BR>\n -<BR>\n -<BR>\n CT-6W<BR>\n CT-6H<BR>\n CT-6P<BR>\n CT-6R<BR>\n -<BR>\n CT-6V<BR>\n CT-6X<BR>\n -<BR>\n -<BR>\n 8038EKV<BR>\n -<BR>\n 8038EKX<BR>\n -<BR>\n -<BR>\n 8038EKP<BR>\n 8038EKZ<BR>\n 8038EKW<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n 3321H<BR>\n 3321P<BR>\n 3321N<BR>\n 1102H<BR>\n 1102P<BR>\n 1102T<BR>\n RVA0911V304A<BR>\n -<BR>\n RVA0911H413A<BR>\n RVG0707V100A<BR>\n RVA0607V(H)306A<BR>\n RVA1214H213A<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3104B<BR>\n 3104C<BR>\n 3104F<BR>\n 3104H<BR>\n -<BR>\n 3104M<BR>\n 3104P<BR>\n 3104S<BR>\n 3104W<BR>\n 3104X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n EVMQ0G<BR>\n EVMQIG<BR>\n EVMQ3G<BR>\n EVMS0G<BR>\n EVMQ0G<BR>\n EVMG0G<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMK4GA00B<BR>\n EVM30GA00B<BR>\n EVMK0GA00B<BR>\n EVM38GA00B<BR>\n EVMB6<BR>\n EVLQ0<BR>\n -<BR>\n EVMMSG<BR>\n EVMMBG<BR>\n EVMMAG<BR>\n -<BR>\n -<BR>\n EVMMCS<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMM1<BR>\n -<BR>\n -<BR>\n EVMM0<BR>\n -<BR>\n -<BR>\n EVMM3<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n 62-3-1<BR>\n 62-1-2<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 67R<BR>\n -<BR>\n 67P<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 67X<BR>\n 63V<BR>\n 63S<BR>\n 63M<BR>\n -<BR>\n -<BR>\n 63H<BR>\n 63P<BR>\n -<BR>\n -<BR>\n 63X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n RJ/RJR50<BR>\n RJ/RJR50<BR>\n RJ/RJR50<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n</TABLE>\n<P>&nbsp;<P>\n<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>\n <TR>\n <TD COLSPAN=7>\n <FONT color=\"#0000FF\" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>\n <P>\n <FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3224G<BR>\n 3224J<BR>\n 3224W<BR>\n 3269P<BR>\n 3269W<BR>\n 3269X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 44G<BR>\n 44J<BR>\n 44W<BR>\n 84P<BR>\n 84W<BR>\n 84X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n ST63Z<BR>\n ST63Y<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n ST5P<BR>\n ST5W<BR>\n ST5X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=7>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=7>\n <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3314G<BR>\n 3314J<BR>\n 3364A/B<BR>\n 3364C/D<BR>\n 3364W/X<BR>\n 3313G<BR>\n 3313J<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 23B<BR>\n 23A<BR>\n 21X<BR>\n 21W<BR>\n -<BR>\n 22B<BR>\n 22A<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ST5YL/ST53YL<BR>\n ST5YJ/5T53YJ<BR>\n ST-23A<BR>\n ST-22B<BR>\n ST-22<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ST-4B<BR>\n ST-4A<BR>\n -<BR>\n -<BR>\n -<BR>\n ST-3B<BR>\n ST-3A<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n EVM-6YS<BR>\n EVM-1E<BR>\n EVM-1G<BR>\n EVM-1D<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n G4B<BR>\n G4A<BR>\n TR04-3S1<BR>\n TRG04-2S1<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n DVR-43A<BR>\n CVR-42C<BR>\n CVR-42A/C<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n</TABLE>\n<P>\n<FONT SIZE=4 FACE=ARIAL><B>ALT =&nbsp;ALTERNATE</B></FONT>\n<P>\n\n&nbsp;\n<P>\n</td>\n</tr>\n</table>\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b><p>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>Chip RESISTOR 0402 EIA (1005 Metric)</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b> wave soldering<p>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nSource: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b> wave soldering<p>\nSource: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.10 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.25 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.12 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.10 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.25 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.25 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.12 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.25 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0204, grid 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0204, grid 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0204, grid 2.5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 10 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 12 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 15mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 2.5 mm\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 5 mm\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0309, grid 10mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0309, grid 12.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0309, grid 2.5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0411, grid 12.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0411, grid 15 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0411, grid 3.81 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>RESISTOR</b><p>\ntype 0414, grid 15 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0414, grid 5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>RESISTOR</b><p>\ntype 0617, grid 17.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0617, grid 22.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0617, grid 5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>RESISTOR</b><p>\ntype 0922, grid 22.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0613, grid 5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>RESISTOR</b><p>\ntype 0613, grid 15 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0817, grid 22.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n0817\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0817, grid 6.35 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n0817\n\n\n\n<b>RESISTOR</b><p>\ntype V234, grid 12.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype V235, grid 17.78 mm\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype V526-0, grid 2.5 mm\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC2211</b> Reflow Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC2211</b> Wave Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC3715</b> Reflow Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC3715</b> Wave Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC6123</b> Reflow Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC6123</b> Wave Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>RESISTOR</b><p>\ntype 0922, grid 7.5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n0922\n\n\n\n<b>RESISTOR</b><p>\ntype RDH, grid 15 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\nRDH\n\n\n\n\n<b>Mini MELF 0102 Axial</b>\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>RESISTOR</b> chip<p>\nSource: http://www.vishay.com/docs/20008/dcrcw.pdf\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RBR52<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RBR53<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RBR54<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RBR55<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RBR56<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RNC55<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RNC60<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Package 4527</b><p>\nSource: http://www.vishay.com/docs/31059/wsrhigh.pdf\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p>\nSource: http://www.vishay.com .. dcrcw.pdf\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Chip Monolithic Ceramic Capacitors</b> Medium Voltage High Capacitance for General Use<p>\nSource: http://www.murata.com .. GRM43DR72E224KW01.pdf\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>PRL1632 are realized as 1W for 3.2 × 1.6mm(1206)</b><p>\nSource: http://www.mouser.com/ds/2/392/products_18-2245.pdf\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 2.4 x 4.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 2.5 x 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 3 x 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 4 x 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 5 x 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 6 x 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm + 5 mm, outline 2.4 x 7 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 + 5 mm, outline 2.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 + 5 mm, outline 3.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 + 5 mm, outline 4.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 + 5 mm, outline 5.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 2.4 x 4.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 2.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 4.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 3 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 5.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 7.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\nHorizontal, grid 5 mm, outline 7.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>CAPACITOR</b><p>\ngrid 7.5 mm, outline 3.2 x 10.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 7.5 mm, outline 4.2 x 10.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 7.5 mm, outline 5.2 x 10.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 10.2 mm, outline 4.3 x 13.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 10.2 mm, outline 5.4 x 13.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 10.2 mm, outline 6.4 x 13.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 15 mm, outline 5.4 x 18.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 15 mm, outline 6.4 x 18.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 15 mm, outline 7.2 x 18.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 15 mm, outline 8.4 x 18.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 15 mm, outline 9.1 x 18.2 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 22.5 mm, outline 6.2 x 26.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 22.5 mm, outline 7.4 x 26.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 22.5 mm, outline 8.7 x 26.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 22.5 mm, outline 10.8 x 26.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 22.5 mm, outline 11.3 x 26.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 9.3 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 11.3 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 13.4 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 20.5 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 32.5 mm, outline 13.7 x 37.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 32.5 mm, outline 16.2 x 37.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 32.5 mm, outline 18.2 x 37.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 37.5 mm, outline 19.2 x 41.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 37.5 mm, outline 20.3 x 41.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 3.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 37.5 mm, outline 15.5 x 41.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 7.5 mm, outline 6.3 x 10.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 15.4 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 17.3 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p>\nMetric Code Size 1005\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p>\nMetric Code Size 1608\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p>\nMetric Code Size 2012\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>\nMetric Code Size 3216\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p>\nMetric Code Size 3225\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p>\nMetric Code Size 4532\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p>\nMetric Code Size 4564\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b> </b><p>\nSource: http://www.vishay.com/docs/10129/hpc0201a.pdf\n\n\n>NAME\n>VALUE\n\n\n\nSource: http://www.avxcorp.com/docs/catalogs/cx5r.pdf\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>CAPACITOR</b><p>\nSource: AVX .. aphvc.pdf\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>CAPACITOR</b><p>\nSource: AVX .. aphvc.pdf\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\nRESISTOR\n\n\nRESISTOR\n\n\nChip RESISTOR 0402 EIA (1005 Metric)\n\n\nRESISTOR wave soldering\n\n\nRESISTOR\n\n\nRESISTOR\nwave soldering\n\n\nRESISTOR\n\n\nRESISTOR\nwave soldering\n\n\nRESISTOR\n\n\nRESISTOR\nwave soldering\n\n\nRESISTOR\n\n\nRESISTOR\nwave soldering\n\n\nRESISTOR\n\n\nRESISTOR\nwave soldering\n\n\nRESISTOR\n\n\nRESISTOR\nwave soldering\n\n\nRESISTOR\n\n\nRESISTOR\nwave soldering\n\n\nRESISTOR\n\n\nRESISTOR\nwave soldering\n\n\nRESISTOR\nSource: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf\n\n\nRESISTOR wave soldering\nSource: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf\n\n\nRESISTOR\nMELF 0.10 W\n\n\nRESISTOR\nMELF 0.25 W\n\n\nRESISTOR\nMELF 0.12 W\n\n\nRESISTOR\nMELF 0.10 W\n\n\nRESISTOR\nMELF 0.25 W\n\n\nRESISTOR\nMELF 0.25 W\n\n\nRESISTOR\nMELF 0.12 W\n\n\nRESISTOR\nMELF 0.25 W\n\n\nRESISTOR\ntype 0204, grid 5 mm\n\n\nRESISTOR\ntype 0204, grid 7.5 mm\n\n\nRESISTOR\ntype 0204, grid 2.5 mm\n\n\nRESISTOR\ntype 0207, grid 10 mm\n\n\nRESISTOR\ntype 0207, grid 12 mm\n\n\nRESISTOR\ntype 0207, grid 15mm\n\n\nRESISTOR\ntype 0207, grid 2.5 mm\n\n\nRESISTOR\ntype 0207, grid 5 mm\n\n\nRESISTOR\ntype 0207, grid 7.5 mm\n\n\nRESISTOR\ntype 0309, grid 10mm\n\n\nRESISTOR\ntype 0309, grid 12.5 mm\n\n\nRESISTOR\ntype 0309, grid 2.5 mm\n\n\nRESISTOR\ntype 0411, grid 12.5 mm\n\n\nRESISTOR\ntype 0411, grid 15 mm\n\n\nRESISTOR\ntype 0411, grid 3.81 mm\n\n\nRESISTOR\ntype 0414, grid 15 mm\n\n\nRESISTOR\ntype 0414, grid 5 mm\n\n\nRESISTOR\ntype 0617, grid 17.5 mm\n\n\nRESISTOR\ntype 0617, grid 22.5 mm\n\n\nRESISTOR\ntype 0617, grid 5 mm\n\n\nRESISTOR\ntype 0922, grid 22.5 mm\n\n\nRESISTOR\ntype 0613, grid 5 mm\n\n\nRESISTOR\ntype 0613, grid 15 mm\n\n\nRESISTOR\ntype 0817, grid 22.5 mm\n\n\nRESISTOR\ntype 0817, grid 6.35 mm\n\n\nRESISTOR\ntype V234, grid 12.5 mm\n\n\nRESISTOR\ntype V235, grid 17.78 mm\n\n\nRESISTOR\ntype V526-0, grid 2.5 mm\n\n\nCECC Size RC2211 Reflow Soldering\nsource Beyschlag\n\n\nCECC Size RC2211 Wave Soldering\nsource Beyschlag\n\n\nCECC Size RC3715 Reflow Soldering\nsource Beyschlag\n\n\nCECC Size RC3715 Wave Soldering\nsource Beyschlag\n\n\nCECC Size RC6123 Reflow Soldering\nsource Beyschlag\n\n\nCECC Size RC6123 Wave Soldering\nsource Beyschlag\n\n\nRESISTOR\ntype 0922, grid 7.5 mm\n\n\nRESISTOR\ntype RDH, grid 15 mm\n\n\nMini MELF 0102 Axial\n\n\nRESISTOR chip\nSource: http://www.vishay.com/docs/20008/dcrcw.pdf\n\n\nBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements\nMIL SIZE RBR52\nSource: VISHAY .. vta56.pdf\n\n\nBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements\nMIL SIZE RBR53\nSource: VISHAY .. vta56.pdf\n\n\nBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements\nMIL SIZE RBR54\nSource: VISHAY .. vta56.pdf\n\n\nBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements\nMIL SIZE RBR55\nSource: VISHAY .. vta56.pdf\n\n\nBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements\nMIL SIZE RBR56\nSource: VISHAY .. vta56.pdf\n\n\nBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements\nMIL SIZE RNC55\nSource: VISHAY .. vta56.pdf\n\n\nBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements\nMIL SIZE RNC60\nSource: VISHAY .. vta56.pdf\n\n\nPackage 4527\nSource: http://www.vishay.com/docs/31059/wsrhigh.pdf\n\n\nWirewound Resistors, Precision Power\nSource: VISHAY wscwsn.pdf\n\n\nWirewound Resistors, Precision Power\nSource: VISHAY wscwsn.pdf\n\n\nWirewound Resistors, Precision Power\nSource: VISHAY wscwsn.pdf\n\n\nWirewound Resistors, Precision Power\nSource: VISHAY wscwsn.pdf\n\n\nWirewound Resistors, Precision Power\nSource: VISHAY wscwsn.pdf\n\n\nWirewound Resistors, Precision Power\nSource: VISHAY wscwsn.pdf\n\n\nCRCW1218 Thick Film, Rectangular Chip Resistors\nSource: http://www.vishay.com .. dcrcw.pdf\n\n\nChip Monolithic Ceramic Capacitors Medium Voltage High Capacitance for General Use\nSource: http://www.murata.com .. GRM43DR72E224KW01.pdf\n\n\nPRL1632 are realized as 1W for 3.2 × 1.6mm(1206)\nSource: http://www.mouser.com/ds/2/392/products_18-2245.pdf\n\n\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\n\n\nCAPACITOR\ngrid 2.5 mm, outline 2.4 x 4.4 mm\n\n\nCAPACITOR\ngrid 2.5 mm, outline 2.5 x 5 mm\n\n\nCAPACITOR\ngrid 2.5 mm, outline 3 x 5 mm\n\n\nCAPACITOR\ngrid 2.5 mm, outline 4 x 5 mm\n\n\nCAPACITOR\ngrid 2.5 mm, outline 5 x 5 mm\n\n\nCAPACITOR\ngrid 2.5 mm, outline 6 x 5 mm\n\n\nCAPACITOR\ngrid 2.5 mm + 5 mm, outline 2.4 x 7 mm\n\n\nCAPACITOR\ngrid 2.5 + 5 mm, outline 2.5 x 7.5 mm\n\n\nCAPACITOR\ngrid 2.5 + 5 mm, outline 3.5 x 7.5 mm\n\n\nCAPACITOR\ngrid 2.5 + 5 mm, outline 4.5 x 7.5 mm\n\n\nCAPACITOR\ngrid 2.5 + 5 mm, outline 5.5 x 7.5 mm\n\n\nCAPACITOR\ngrid 5 mm, outline 2.4 x 4.4 mm\n\n\nCAPACITOR\ngrid 5 mm, outline 2.5 x 7.5 mm\n\n\nCAPACITOR\ngrid 5 mm, outline 4.5 x 7.5 mm\n\n\nCAPACITOR\ngrid 5 mm, outline 3 x 7.5 mm\n\n\nCAPACITOR\ngrid 5 mm, outline 5 x 7.5 mm\n\n\nCAPACITOR\ngrid 5 mm, outline 5.5 x 7.5 mm\n\n\nCAPACITOR\ngrid 5 mm, outline 7.5 x 7.5 mm\n\n\nCAPACITOR\nHorizontal, grid 5 mm, outline 7.5 x 7.5 mm\n\n\nCAPACITOR\ngrid 7.5 mm, outline 3.2 x 10.3 mm\n\n\nCAPACITOR\ngrid 7.5 mm, outline 4.2 x 10.3 mm\n\n\nCAPACITOR\ngrid 7.5 mm, outline 5.2 x 10.6 mm\n\n\nCAPACITOR\ngrid 10.2 mm, outline 4.3 x 13.3 mm\n\n\nCAPACITOR\ngrid 10.2 mm, outline 5.4 x 13.3 mm\n\n\nCAPACITOR\ngrid 10.2 mm, outline 6.4 x 13.3 mm\n\n\nCAPACITOR\ngrid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm\n\n\nCAPACITOR\ngrid 15 mm, outline 5.4 x 18.3 mm\n\n\nCAPACITOR\ngrid 15 mm, outline 6.4 x 18.3 mm\n\n\nCAPACITOR\ngrid 15 mm, outline 7.2 x 18.3 mm\n\n\nCAPACITOR\ngrid 15 mm, outline 8.4 x 18.3 mm\n\n\nCAPACITOR\ngrid 15 mm, outline 9.1 x 18.2 mm\n\n\nCAPACITOR\ngrid 22.5 mm, outline 6.2 x 26.8 mm\n\n\nCAPACITOR\ngrid 22.5 mm, outline 7.4 x 26.8 mm\n\n\nCAPACITOR\ngrid 22.5 mm, outline 8.7 x 26.8 mm\n\n\nCAPACITOR\ngrid 22.5 mm, outline 10.8 x 26.8 mm\n\n\nCAPACITOR\ngrid 22.5 mm, outline 11.3 x 26.8 mm\n\n\nCAPACITOR\ngrid 27.5 mm, outline 9.3 x 31.6 mm\n\n\nCAPACITOR\ngrid 27.5 mm, outline 11.3 x 31.6 mm\n\n\nCAPACITOR\ngrid 27.5 mm, outline 13.4 x 31.6 mm\n\n\nCAPACITOR\ngrid 27.5 mm, outline 20.5 x 31.6 mm\n\n\nCAPACITOR\ngrid 32.5 mm, outline 13.7 x 37.4 mm\n\n\nCAPACITOR\ngrid 32.5 mm, outline 16.2 x 37.4 mm\n\n\nCAPACITOR\ngrid 32.5 mm, outline 18.2 x 37.4 mm\n\n\nCAPACITOR\ngrid 37.5 mm, outline 19.2 x 41.8 mm\n\n\nCAPACITOR\ngrid 37.5 mm, outline 20.3 x 41.8 mm\n\n\nCAPACITOR\ngrid 5 mm, outline 3.5 x 7.5 mm\n\n\nCAPACITOR\ngrid 37.5 mm, outline 15.5 x 41.8 mm\n\n\nCAPACITOR\ngrid 7.5 mm, outline 6.3 x 10.6 mm\n\n\nCAPACITOR\ngrid 27.5 mm, outline 15.4 x 31.6 mm\n\n\nCAPACITOR\ngrid 27.5 mm, outline 17.3 x 31.6 mm\n\n\nCeramic Chip Capacitor KEMET 0204 reflow solder\nMetric Code Size 1005\n\n\nCeramic Chip Capacitor KEMET 0603 reflow solder\nMetric Code Size 1608\n\n\nCeramic Chip Capacitor KEMET 0805 reflow solder\nMetric Code Size 2012\n\n\nCeramic Chip Capacitor KEMET 1206 reflow solder\nMetric Code Size 3216\n\n\nCeramic Chip Capacitor KEMET 1210 reflow solder\nMetric Code Size 3225\n\n\nCeramic Chip Capacitor KEMET 1812 reflow solder\nMetric Code Size 4532\n\n\nCeramic Chip Capacitor KEMET 1825 reflow solder\nMetric Code Size 4564\n\n\nCeramic Chip Capacitor KEMET 2220 reflow solderMetric Code Size 5650\n\n\nCeramic Chip Capacitor KEMET 2225 reflow solderMetric Code Size 5664\n\n\n \nSource: http://www.vishay.com/docs/10129/hpc0201a.pdf\n\n\nSource: http://www.avxcorp.com/docs/catalogs/cx5r.pdf\n\n\nCAPACITOR\nSource: AVX .. aphvc.pdf\n\n\nCAPACITOR\nSource: AVX .. aphvc.pdf\n\n\nCAPACITOR\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n<B>RESISTOR</B>, European symbol\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<B>CAPACITOR</B>, European symbol\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nSMA DIP Connector 90° 50 Ohm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n>LABEL\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n>LABEL\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\nRed\nGrn\nBlue\n\n\n\n\n\n\n\n\n\n\n<b>SMA Connector</b>\n<p>90° DIP SMA Connector, 50 Ohm (4UConnector: 07259)</p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nFor 5050 RGB LEDs, the order of the LEDs may vary from one manufacturer to another!\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nnrf52840 module by holyiot\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>Test Pins/Pads</b><p>\nCream on SMD OFF.<br>\nnew: Attribute TP_SIGNAL_NAME<br>\n<author>Created by librarian@cadsoft.de</author>\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n\n\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n\n<b>TEST PAD</b>\n\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n\n<b>TEST PAD</b>\n\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n\n<b>TEST PAD</b>\n\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n\n<b>TEST PAD</b>\n\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n\n<b>TEST PAD</b>\n\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n<b>TEST PAD</b>\n\n>NAME\n>VALUE\n>TP_SIGNAL_NAME\n\n\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\nTEST PAD\n\n\n\n\n\n\n\n\n\n>NAME\n>TP_SIGNAL_NAME\n\n\n\n\n\n<b>Test pad</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>SparkFun Electronics' Retired foot prints</h3>\nIn this library you'll find all manner of retired footprints for resistors, capacitors, board names, ICs, etc., that are <b> no longer used</b> in our catalog.\n<br>\n<br>\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. \n<br>\n<br>If you enjoy using this library, please buy one of our products at <a href=\" www.sparkfun.com\">SparkFun.com</a>.\n<br>\n<br>\n<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n<br>\n<br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Solder jumper</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>Solder jumper</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n>VALUE\nPASTE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n>VALUE\nPASTE\n\n\n\nSmall solder jumper with big paste layer so it will short during reflow.\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\nSolder jumper, small, shorted with trace. No paste layer. Trace is cuttable.\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\nSmall solder jumper with no paste layer so it will open after reflow.\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\nSWCH-10651\n\nSide-actuated SPDT slide switch, as used on the Arduino Pro\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>Solder Jumper</b>\n2 way solder jumper\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>Solder Jumper</b>\nStandard SMD solder jumper. Used to automate production. Two varients : Normally Open and Normally Closed are the same, but have different paste layers. NC will have a large amount of paste and should jumper during reflow.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>VALUE\n\n\n\n\n\n<b>SUPPLY SYMBOL</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>SparkFun Power Symbols</h3>\nThis library contains power, ground, and voltage-supply symbols.\n<br>\n<br>\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. \n<br>\n<br>If you enjoy using this library, please buy one of our products at <a href=\" www.sparkfun.com\">SparkFun.com</a>.\n<br>\n<br>\n<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n<br>\n<br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n<h3>Digital Ground Supply</h3>\n\n\n>VALUE\n\n\n\n\n<h3>Ground Supply Symbol</h3>\n<p>Generic signal ground supply symbol.</p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nGenerated from <b>BLE-LORA-Relay-30dbm-v2.0.sch</b><p>\nby exp-lbrs.ulp\n\n\n<B>Small Outline Narrow Plastic Gull Wing</B><p>\n150-mil body, package type SN\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\nIPC SO8\nJEDEC MS-012 AA\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>Resistors, Capacitors, Inductors</b><p>\nBased on the previous libraries:\n<ul>\n<li>r.lbr\n<li>cap.lbr \n<li>cap-fe.lbr\n<li>captant.lbr\n<li>polcap.lbr\n<li>ipc-smd.lbr\n</ul>\nAll SMD packages are defined according to the IPC specifications and CECC<p>\n<author>Created by librarian@cadsoft.de</author><p>\n<p>\nfor Electrolyt Capacitors see also :<p>\nwww.bccomponents.com <p>\nwww.panasonic.com<p>\nwww.kemet.com<p>\nhttp://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>\n<p>\nfor trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>\n\n<table border=0 cellspacing=0 cellpadding=0 width=\"100%\" cellpaddding=0>\n<tr valign=\"top\">\n\n<! <td width=\"10\">&nbsp;</td>\n<td width=\"90%\">\n\n<b><font color=\"#0000FF\" size=\"4\">TRIM-POT CROSS REFERENCE</font></b>\n<P>\n<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">BOURNS</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">BI&nbsp;TECH</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">DALE-VISHAY</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">PHILIPS/MEPCO</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">MURATA</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">PANASONIC</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">SPECTROL</FONT>\n </B>\n </TD>\n <TD ALIGN=CENTER>\n <B>\n <FONT SIZE=3 FACE=ARIAL color=\"#FF0000\">MILSPEC</FONT>\n </B>\n </TD><TD>&nbsp;</TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >\n 3005P<BR>\n 3006P<BR>\n 3006W<BR>\n 3006Y<BR>\n 3009P<BR>\n 3009W<BR>\n 3009Y<BR>\n 3057J<BR>\n 3057L<BR>\n 3057P<BR>\n 3057Y<BR>\n 3059J<BR>\n 3059L<BR>\n 3059P<BR>\n 3059Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 89P<BR>\n 89W<BR>\n 89X<BR>\n 89PH<BR>\n 76P<BR>\n 89XH<BR>\n 78SLT<BR>\n 78L&nbsp;ALT<BR>\n 56P&nbsp;ALT<BR>\n 78P&nbsp;ALT<BR>\n T8S<BR>\n 78L<BR>\n 56P<BR>\n 78P<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n T18/784<BR>\n 783<BR>\n 781<BR>\n -<BR>\n -<BR>\n -<BR>\n 2199<BR>\n 1697/1897<BR>\n 1680/1880<BR>\n 2187<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 8035EKP/CT20/RJ-20P<BR>\n -<BR>\n RJ-20X<BR>\n -<BR>\n -<BR>\n -<BR>\n 1211L<BR>\n 8012EKQ&nbsp;ALT<BR>\n 8012EKR&nbsp;ALT<BR>\n 1211P<BR>\n 8012EKJ<BR>\n 8012EKL<BR>\n 8012EKQ<BR>\n 8012EKR<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 2101P<BR>\n 2101W<BR>\n 2101Y<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 2102L<BR>\n 2102S<BR>\n 2102Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n EVMCOG<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 43P<BR>\n 43W<BR>\n 43Y<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 40L<BR>\n 40P<BR>\n 40Y<BR>\n 70Y-T602<BR>\n 70L<BR>\n 70P<BR>\n 70Y<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n RT/RTR12<BR>\n RT/RTR12<BR>\n RT/RTR12<BR>\n -<BR>\n RJ/RJR12<BR>\n RJ/RJR12<BR>\n RJ/RJR12<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3250L<BR>\n 3250P<BR>\n 3250W<BR>\n 3250X<BR>\n 3252P<BR>\n 3252W<BR>\n 3252X<BR>\n 3260P<BR>\n 3260W<BR>\n 3260X<BR>\n 3262P<BR>\n 3262W<BR>\n 3262X<BR>\n 3266P<BR>\n 3266W<BR>\n 3266X<BR>\n 3290H<BR>\n 3290P<BR>\n 3290W<BR>\n 3292P<BR>\n 3292W<BR>\n 3292X<BR>\n 3296P<BR>\n 3296W<BR>\n 3296X<BR>\n 3296Y<BR>\n 3296Z<BR>\n 3299P<BR>\n 3299W<BR>\n 3299X<BR>\n 3299Y<BR>\n 3299Z<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66X&nbsp;ALT<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66X&nbsp;ALT<BR>\n -<BR>\n 64W&nbsp;ALT<BR>\n -<BR>\n 64P&nbsp;ALT<BR>\n 64W&nbsp;ALT<BR>\n 64X&nbsp;ALT<BR>\n 64P<BR>\n 64W<BR>\n 64X<BR>\n 66X&nbsp;ALT<BR>\n 66P&nbsp;ALT<BR>\n 66W&nbsp;ALT<BR>\n 66P<BR>\n 66W<BR>\n 66X<BR>\n 67P<BR>\n 67W<BR>\n 67X<BR>\n 67Y<BR>\n 67Z<BR>\n 68P<BR>\n 68W<BR>\n 68X<BR>\n 67Y&nbsp;ALT<BR>\n 67Z&nbsp;ALT<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 5050<BR>\n 5091<BR>\n 5080<BR>\n 5087<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n T63YB<BR>\n T63XB<BR>\n -<BR>\n -<BR>\n -<BR>\n 5887<BR>\n 5891<BR>\n 5880<BR>\n -<BR>\n -<BR>\n -<BR>\n T93Z<BR>\n T93YA<BR>\n T93XA<BR>\n T93YB<BR>\n T93XB<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 8026EKP<BR>\n 8026EKW<BR>\n 8026EKM<BR>\n 8026EKP<BR>\n 8026EKB<BR>\n 8026EKM<BR>\n 1309X<BR>\n 1309P<BR>\n 1309W<BR>\n 8024EKP<BR>\n 8024EKW<BR>\n 8024EKN<BR>\n RJ-9P/CT9P<BR>\n RJ-9W<BR>\n RJ-9X<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3103P<BR>\n 3103Y<BR>\n 3103Z<BR>\n 3103P<BR>\n 3103Y<BR>\n 3103Z<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3105P/3106P<BR>\n 3105W/3106W<BR>\n 3105X/3106X<BR>\n 3105Y/3106Y<BR>\n 3105Z/3105Z<BR>\n 3102P<BR>\n 3102W<BR>\n 3102X<BR>\n 3102Y<BR>\n 3102Z<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMCBG<BR>\n EVMCCG<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 55-1-X<BR>\n 55-4-X<BR>\n 55-3-X<BR>\n 55-2-X<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 50-2-X<BR>\n 50-4-X<BR>\n 50-3-X<BR>\n -<BR>\n -<BR>\n -<BR>\n 64P<BR>\n 64W<BR>\n 64X<BR>\n 64Y<BR>\n 64Z<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RT/RTR22<BR>\n RJ/RJR22<BR>\n RJ/RJR22<BR>\n RJ/RJR22<BR>\n RT/RTR26<BR>\n RT/RTR26<BR>\n RT/RTR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RJ/RJR26<BR>\n RT/RTR24<BR>\n RT/RTR24<BR>\n RT/RTR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n RJ/RJR24<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=8>\n <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>\n </TD>\n <TD ALIGN=CENTER>\n <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3323P<BR>\n 3323S<BR>\n 3323W<BR>\n 3329H<BR>\n 3329P<BR>\n 3329W<BR>\n 3339H<BR>\n 3339P<BR>\n 3339W<BR>\n 3352E<BR>\n 3352H<BR>\n 3352K<BR>\n 3352P<BR>\n 3352T<BR>\n 3352V<BR>\n 3352W<BR>\n 3362H<BR>\n 3362M<BR>\n 3362P<BR>\n 3362R<BR>\n 3362S<BR>\n 3362U<BR>\n 3362W<BR>\n 3362X<BR>\n 3386B<BR>\n 3386C<BR>\n 3386F<BR>\n 3386H<BR>\n 3386K<BR>\n 3386M<BR>\n 3386P<BR>\n 3386S<BR>\n 3386W<BR>\n 3386X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 25P<BR>\n 25S<BR>\n 25RX<BR>\n 82P<BR>\n 82M<BR>\n 82PA<BR>\n -<BR>\n -<BR>\n -<BR>\n 91E<BR>\n 91X<BR>\n 91T<BR>\n 91B<BR>\n 91A<BR>\n 91V<BR>\n 91W<BR>\n 25W<BR>\n 25V<BR>\n 25P<BR>\n -<BR>\n 25S<BR>\n 25U<BR>\n 25RX<BR>\n 25X<BR>\n 72XW<BR>\n 72XL<BR>\n 72PM<BR>\n 72RX<BR>\n -<BR>\n 72PX<BR>\n 72P<BR>\n 72RXW<BR>\n 72RXL<BR>\n 72X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n T7YB<BR>\n T7YA<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n TXD<BR>\n TYA<BR>\n TYP<BR>\n -<BR>\n TYD<BR>\n TX<BR>\n -<BR>\n 150SX<BR>\n 100SX<BR>\n 102T<BR>\n 101S<BR>\n 190T<BR>\n 150TX<BR>\n 101<BR>\n -<BR>\n -<BR>\n 101SX<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ET6P<BR>\n ET6S<BR>\n ET6X<BR>\n RJ-6W/8014EMW<BR>\n RJ-6P/8014EMP<BR>\n RJ-6X/8014EMX<BR>\n TM7W<BR>\n TM7P<BR>\n TM7X<BR>\n -<BR>\n 8017SMS<BR>\n -<BR>\n 8017SMB<BR>\n 8017SMA<BR>\n -<BR>\n -<BR>\n CT-6W<BR>\n CT-6H<BR>\n CT-6P<BR>\n CT-6R<BR>\n -<BR>\n CT-6V<BR>\n CT-6X<BR>\n -<BR>\n -<BR>\n 8038EKV<BR>\n -<BR>\n 8038EKX<BR>\n -<BR>\n -<BR>\n 8038EKP<BR>\n 8038EKZ<BR>\n 8038EKW<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n 3321H<BR>\n 3321P<BR>\n 3321N<BR>\n 1102H<BR>\n 1102P<BR>\n 1102T<BR>\n RVA0911V304A<BR>\n -<BR>\n RVA0911H413A<BR>\n RVG0707V100A<BR>\n RVA0607V(H)306A<BR>\n RVA1214H213A<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 3104B<BR>\n 3104C<BR>\n 3104F<BR>\n 3104H<BR>\n -<BR>\n 3104M<BR>\n 3104P<BR>\n 3104S<BR>\n 3104W<BR>\n 3104X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n EVMQ0G<BR>\n EVMQIG<BR>\n EVMQ3G<BR>\n EVMS0G<BR>\n EVMQ0G<BR>\n EVMG0G<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMK4GA00B<BR>\n EVM30GA00B<BR>\n EVMK0GA00B<BR>\n EVM38GA00B<BR>\n EVMB6<BR>\n EVLQ0<BR>\n -<BR>\n EVMMSG<BR>\n EVMMBG<BR>\n EVMMAG<BR>\n -<BR>\n -<BR>\n EVMMCS<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n EVMM1<BR>\n -<BR>\n -<BR>\n EVMM0<BR>\n -<BR>\n -<BR>\n EVMM3<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n 62-3-1<BR>\n 62-1-2<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 67R<BR>\n -<BR>\n 67P<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n 67X<BR>\n 63V<BR>\n 63S<BR>\n 63M<BR>\n -<BR>\n -<BR>\n 63H<BR>\n 63P<BR>\n -<BR>\n -<BR>\n 63X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n RJ/RJR50<BR>\n RJ/RJR50<BR>\n RJ/RJR50<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n</TABLE>\n<P>&nbsp;<P>\n<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>\n <TR>\n <TD COLSPAN=7>\n <FONT color=\"#0000FF\" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>\n <P>\n <FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3224G<BR>\n 3224J<BR>\n 3224W<BR>\n 3269P<BR>\n 3269W<BR>\n 3269X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 44G<BR>\n 44J<BR>\n 44W<BR>\n 84P<BR>\n 84W<BR>\n 84X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n ST63Z<BR>\n ST63Y<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n ST5P<BR>\n ST5W<BR>\n ST5X<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=7>&nbsp;\n </TD>\n </TR>\n <TR>\n <TD COLSPAN=7>\n <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>\n </TD>\n <TD>\n <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>\n </TD>\n </TR>\n <TR>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 3314G<BR>\n 3314J<BR>\n 3364A/B<BR>\n 3364C/D<BR>\n 3364W/X<BR>\n 3313G<BR>\n 3313J<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n 23B<BR>\n 23A<BR>\n 21X<BR>\n 21W<BR>\n -<BR>\n 22B<BR>\n 22A<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ST5YL/ST53YL<BR>\n ST5YJ/5T53YJ<BR>\n ST-23A<BR>\n ST-22B<BR>\n ST-22<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n ST-4B<BR>\n ST-4A<BR>\n -<BR>\n -<BR>\n -<BR>\n ST-3B<BR>\n ST-3A<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n EVM-6YS<BR>\n EVM-1E<BR>\n EVM-1G<BR>\n EVM-1D<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n G4B<BR>\n G4A<BR>\n TR04-3S1<BR>\n TRG04-2S1<BR>\n -<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n <TD BGCOLOR=\"#cccccc\" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>\n -<BR>\n -<BR>\n DVR-43A<BR>\n CVR-42C<BR>\n CVR-42A/C<BR>\n -<BR>\n -<BR></FONT>\n </TD>\n </TR>\n</TABLE>\n<P>\n<FONT SIZE=4 FACE=ARIAL><B>ALT =&nbsp;ALTERNATE</B></FONT>\n<P>\n\n&nbsp;\n<P>\n</td>\n</tr>\n</table>\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b><p>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 2.4 x 4.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 2.5 x 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 3 x 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 4 x 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 5 x 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm, outline 6 x 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 mm + 5 mm, outline 2.4 x 7 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 + 5 mm, outline 2.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 + 5 mm, outline 3.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 + 5 mm, outline 4.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 2.5 + 5 mm, outline 5.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 2.4 x 4.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 2.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 4.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 3 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 5.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 7.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\nHorizontal, grid 5 mm, outline 7.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>CAPACITOR</b><p>\ngrid 7.5 mm, outline 3.2 x 10.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 7.5 mm, outline 4.2 x 10.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 7.5 mm, outline 5.2 x 10.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 10.2 mm, outline 4.3 x 13.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 10.2 mm, outline 5.4 x 13.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 10.2 mm, outline 6.4 x 13.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 15 mm, outline 5.4 x 18.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 15 mm, outline 6.4 x 18.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 15 mm, outline 7.2 x 18.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 15 mm, outline 8.4 x 18.3 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 15 mm, outline 9.1 x 18.2 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 22.5 mm, outline 6.2 x 26.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 22.5 mm, outline 7.4 x 26.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 22.5 mm, outline 8.7 x 26.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 22.5 mm, outline 10.8 x 26.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 22.5 mm, outline 11.3 x 26.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 9.3 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 11.3 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 13.4 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 20.5 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 32.5 mm, outline 13.7 x 37.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 32.5 mm, outline 16.2 x 37.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 32.5 mm, outline 18.2 x 37.4 mm\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 37.5 mm, outline 19.2 x 41.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 37.5 mm, outline 20.3 x 41.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 5 mm, outline 3.5 x 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 37.5 mm, outline 15.5 x 41.8 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 7.5 mm, outline 6.3 x 10.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 15.4 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CAPACITOR</b><p>\ngrid 27.5 mm, outline 17.3 x 31.6 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p>\nMetric Code Size 1005\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p>\nMetric Code Size 1608\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p>\nMetric Code Size 2012\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>\nMetric Code Size 3216\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p>\nMetric Code Size 3225\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p>\nMetric Code Size 4532\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p>\nMetric Code Size 4564\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b> </b><p>\nSource: http://www.vishay.com/docs/10129/hpc0201a.pdf\n\n\n>NAME\n>VALUE\n\n\n\nSource: http://www.avxcorp.com/docs/catalogs/cx5r.pdf\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>CAPACITOR</b><p>\nSource: AVX .. aphvc.pdf\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>CAPACITOR</b><p>\nSource: AVX .. aphvc.pdf\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>CAPACITOR</b>\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b> wave soldering<p>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b>\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nwave soldering\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nSource: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b> wave soldering<p>\nSource: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.10 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.25 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.12 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.10 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.25 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.25 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.12 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\nMELF 0.25 W\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0204, grid 5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0204, grid 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0204, grid 2.5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 10 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 12 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 15mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 2.5 mm\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 5 mm\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>RESISTOR</b><p>\ntype 0207, grid 7.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0309, grid 10mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0309, grid 12.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0309, grid 2.5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0411, grid 12.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0411, grid 15 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0411, grid 3.81 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>RESISTOR</b><p>\ntype 0414, grid 15 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0414, grid 5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>RESISTOR</b><p>\ntype 0617, grid 17.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0617, grid 22.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0617, grid 5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>RESISTOR</b><p>\ntype 0922, grid 22.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0613, grid 5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>RESISTOR</b><p>\ntype 0613, grid 15 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0817, grid 22.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n0817\n\n\n\n\n<b>RESISTOR</b><p>\ntype 0817, grid 6.35 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n0817\n\n\n\n<b>RESISTOR</b><p>\ntype V234, grid 12.5 mm\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype V235, grid 17.78 mm\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>RESISTOR</b><p>\ntype V526-0, grid 2.5 mm\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC2211</b> Reflow Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC2211</b> Wave Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC3715</b> Reflow Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC3715</b> Wave Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC6123</b> Reflow Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CECC Size RC6123</b> Wave Soldering<p>\nsource Beyschlag\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>RESISTOR</b><p>\ntype 0922, grid 7.5 mm\n\n\n\n\n\n\n>NAME\n>VALUE\n0922\n\n\n\n<b>RESISTOR</b><p>\ntype RDH, grid 15 mm\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\nRDH\n\n\n\n\n<b>Mini MELF 0102 Axial</b>\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>RESISTOR</b> chip<p>\nSource: http://www.vishay.com/docs/20008/dcrcw.pdf\n\n\n>NAME\n>VALUE\n\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RBR52<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RBR53<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RBR54<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RBR55<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RBR56<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RNC55<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>\nMIL SIZE RNC60<br>\nSource: VISHAY .. vta56.pdf\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Package 4527</b><p>\nSource: http://www.vishay.com/docs/31059/wsrhigh.pdf\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>Wirewound Resistors, Precision Power</b><p>\nSource: VISHAY wscwsn.pdf\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n<b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p>\nSource: http://www.vishay.com .. dcrcw.pdf\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>Chip Monolithic Ceramic Capacitors</b> Medium Voltage High Capacitance for General Use<p>\nSource: http://www.murata.com .. GRM43DR72E224KW01.pdf\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n<b>PRL1632 are realized as 1W for 3.2 × 1.6mm(1206)</b><p>\nSource: http://www.mouser.com/ds/2/392/products_18-2245.pdf\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<B>CAPACITOR</B>, European symbol\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<B>RESISTOR</B>, European symbol\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>GeekAmmo Library</h3>\n\nThese are parts used by the GeekAmmo company (now part of SparkFun Electronics)!\n\n If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n<br><br>\n<b>Licensing:</b>Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/\n<br><br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>VALUE\n>NAME\nG\nS\nD\n\n\n\n\n\n\n\n\n\n\n\n\nN-Channel MOSFET Mode Field Effect Transistor\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<h3>SparkFun Electronics' preferred foot prints</h3>\nIn this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.<br><br>\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n<br><br>\n<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n<br><br>\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<B>Diode</B><p>\nBasic SMA packaged diode. Good for reverse polarization protection. Common part #: MBRA140\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\nSchottky diodes in SFE's production catalog<p>\n\nBAT20J 1A 23V 0.62Vf<br>\nRB751 120mA 40V 0.37Vf<br>\nPMEG4005EJ 0.5A 40V 0.42Vf<br>\nMBRA140 1A 40V 0.5Vf<br>\nB340A 3A 40V SMA <br>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>0402<b><p>\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n<b>0603<b><p>\n\n\n\n\n\n\n>NAME\n>VALUE\n>name\n\n\n\n<b>0805<b><p>\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\nFILM CAP 0.01UF/275V\n\n\n\n\n\n\n>NAME\n>VALUE\n>name\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n>NAME\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n>NAME\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n<b>Ceramic Capacitors<b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nGenerated from <b>LoRa-Messenger-v1.0.sch</b><p>\nby exp-lbrs.ulp\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>SMALL OUTLINE INTEGRATED CIRCUIT</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<b>Jumpers</b><p>\n<author>Created by librarian@cadsoft.de</author>\n\n\n<b>Solder jumper</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n<b>Solder jumper</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n>NAME\n>VALUE\n\n\n\n\n\n\nSMD solder <b>JUMPER</b>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nPOWER AND FILTERING\n(600mA Output)\nDropout Voltage (25°C):\n100mA: ~250/~40mV\n300mA: ~300/~125mV\n600mA: ~375/~260mV\n10K = 100mA\n5.0K = 200mA\n2.0K = 500mA\n1.0K = 1000mA\nLIPO CHARGING\nTo charge the LIPO, insert the\nbattery in the JST PH connector\nand connect USB at the same time.\nBQ27441-G1 Fuel Gauge\nVDD is 1.8V\ngenerated internally\nI2C ADDR: 0x55\nHolyiot YJ-18010 nRF52840 module\nP1.11 and 1.10 are swapped in the library!!!\nGPS\nMICROSD CARD\nSet to UFP (Peripheral)\nAlso marks this as a USB 2.0 peripheral device\n\nFor DFP (Host) you need pullups\nhere instead of pulldowns.\nUpstream/Downstream Facing Port Setup:\nJST-SH-4\nTP4056\nsmaller 22dbm variant\nalso used by the feather bootloader \nin default\nFor SPI set CSB low at startup\nSDO=MISO, SDI=MOSI, SCK=SCK, CSB=CS/SSEL\nFor I2C leave CSB pulled high (default value)\nSDI=SDA, SCK=SCL\nactually P1.10\nhttps://de.aliexpress.com/item/33056042016.html?spm=a2g0s.9042311.0.0.4a9b4c4dQIyuQ2\nhttps://de.aliexpress.com/item/32868002366.html?spm=a2g0s.9042311.0.0.27424c4duvmlGy\nhttps://de.aliexpress.com/item/32607879172.html?spm=a2g0o.productlist.0.0.13b1b3a5JPB3GS&algo_pvid=b9191f80-57f7-4ba1-a376-d5b7fd01a70f&algo_expid=b9191f80-57f7-4ba1-a376-d5b7fd01a70f-25&btsid=0ab50f4915950751178702682eb47a&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_\n16MBIT QSPI FLASH\nfor external signal input connect to VDD\nVibration Motor Control\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n..\n0x69!!\nAccelerometer + magnetometer + gyroscope\nRTC with built-in mems oscillator\nSWO!\ncut the solder jumpers for NFC functionality\n\nand populate C19 and C14\nBlackberry Q10 keyboard\nSHARP 2,7 inch memory LCD\naddr=0x68\n5v charge pump\nwarning: can collide with the MPU9250\nbuzzer\nLS027B7DH01\n\"9032\"\n10x4mm surface mount vibration motor\n10x4mm surface mount vibration motor\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nSince Version 6.2.2 text objects can contain more than one line,\nwhich will not be processed correctly with this version.\n\n\nSince Version 8.2, EAGLE supports online libraries. The ids\nof those online libraries will not be understood (or retained)\nwith this version.\n\n\nSince Version 8.3, EAGLE supports URNs for individual library\nassets (packages, symbols, and devices). The URNs of those assets\nwill not be understood (or retained) with this version.\n\n\nSince Version 8.3, EAGLE supports the association of 3D packages\nwith devices in libraries, schematics, and board files. Those 3D\npackages will not be understood (or retained) with this version.\n\n\nSince Version 8.4, EAGLE supports properties for SPICE simulation. \nProbes in schematics and SPICE mapping objects found in parts and library devices\nwill not be understood with this version. Update EAGLE to the latest version\nfor full support of SPICE simulation. \n\n\n\n" }, { "path": "README.md", "content": "# LORA-QWERTY-Communicator\nA tidy, versatile and feature-packed LORA QWERTY communication device mainly based on a Blackberry Q10 keyboard, nRF52840, SX1262 and a 2.7'' Sharp Memory LCD (LS027B7DH01).\nI created this because I wanted to practice a little and put some components that I had laying around to good use. The system had to have a low power consumption and outdoor usability, hence the component choices. The SX1262 draws 4,6mA in RX mode and the nRF52 can poll the keyboard while also drawing little power. Without optimizing anything I got 12mA. This can be further reduced by turning off some sensors. The unit can monitor its own power consumption and battery charge status via a BQ27441 Lithium Fuel Gauge. \n![finished devices](https://github.com/BigCorvus/LORA-QWERTY-Communicator/blob/main/Q10%20Lora%20Communicator/Images/20220512_214537.jpg) \n\nSome words about the memory LCDs: I got fake ones from Ali and only one out of three works properly! One consumes 20mA instead of ~400µA and one had some dead pixels after some days of usage (seen on the pictures). They are not that much cheaper (~25 vs ca 32$), so avoid them and only get genuine SHARP displays from digikey or so. \nThere is a passive piezo buzzer (9032 type) and a vibration motor (\"10x4mm\" look on Aliexpress) for notification purposes. A BME280 can be soldered for altimeter functionality. A DS3231M RTC is supposed to keep time (the wires on the images are for optional backup battery connection). A MPU9250 9-DOF IMU was included to act as a tilt-compensated compass or for air mouse functionality. A GD25Q16CE QSPI flash (apparently optional, not required by the bootloader, works with mass storage TinyUSB test sketch) and an µSD card slot for storage of for example chat history or sensor values. An optional GPS module can be connected to the exposed connector at the top of the device. I used a BN220 which fits into the enclosure if you use an appropriate LiPo cell. All I2C sensor are on one I2C bus and are optional. They do not need to be populated. Time and altitude can just as well be fetched via GPS. The connector for the Q10 keyboard is a Hirose BM14B(0.8)-24DS-0.4V(53) \n\n![open devices](https://github.com/BigCorvus/LORA-QWERTY-Communicator/blob/main/Q10%20Lora%20Communicator/Images/20220512_214741.jpg) \n![open devices 2](https://github.com/BigCorvus/LORA-QWERTY-Communicator/blob/main/Q10%20Lora%20Communicator/Images/20220512_214833.jpg) \n\nThe repository contains the EAGLE PCB design files, gerber, pick and place and BOM files, Solidworks design files and .STL for a perfectly fitting enclosure and an Arduino test sketch to test most of the system components. The enclosure lacks inserts for the pushbutton and slide swith. This I will add in the future. You require 4 2mmx10mm plastic screws to hold it together. The resulting device has a thickness of only about 13,5mm. \nWhile the hardware is confirmed working (only one minor bug had to be fixed in the prototype - conflicting I2C addresses), the firmware part is very raw and has yet to be developed. Unfortunately I lack time desperately for such hobby things at the moment. What I had in mind for this device is mainly something like an encrypted \"apocalypse\" LORA communicator, maybe even based on Meshtastic. It can also communicate with other BLE devices and acquire, log and share sensor data or act as a USB or BLE HID keyboard. The test firmware is based on the Adafruit nRF52 core v1.0.0. In order for the device to be programmable via the Arduino IDE, the Feather nRF52840 Express bootloader has to be flashed, which I usually do via a J-Link and the Arduino IDE (\"Burn Bootloader\"). The bootloader can be activated at any time double-pulling the reset pin low. In a future revision there should also be reset button for that purpose, now there is at least a test point. The variant files for the Feather nRF52840 express need to be modified as well before programming the board. They are provided with the test sketch together with a readme. \n\n![bottom](https://github.com/BigCorvus/LORA-QWERTY-Communicator/blob/main/Q10%20Lora%20Communicator/Images/q10-lora-bottom.png) \n![top](https://github.com/BigCorvus/LORA-QWERTY-Communicator/blob/main/Q10%20Lora%20Communicator/Images/q10-lora-top.png) \n![schematics](https://github.com/BigCorvus/LORA-QWERTY-Communicator/blob/main/Q10%20Lora%20Communicator/Images/q10-lora-v1.1-schematic.png)\n\n\n\n" } ]