[
  {
    "path": "Adafruit_SHARP_Memory_Display/Adafruit_SharpMem.cpp",
    "content": "/*********************************************************************\nThis is an Arduino library for our Monochrome SHARP Memory Displays\n\n  Pick one up today in the adafruit shop!\n  ------> http://www.adafruit.com/products/1393\n\nThese displays use SPI to communicate, 3 pins are required to  \ninterface\n\nAdafruit invests time and resources providing this open source code, \nplease support Adafruit and open-source hardware by purchasing \nproducts from Adafruit!\n\nWritten by Limor Fried/Ladyada  for Adafruit Industries.  \nBSD license, check license.txt for more information\nAll text above, and the splash screen must be included in any redistribution\n*********************************************************************/\n\n#include \"Adafruit_SharpMem.h\"\n\n#ifndef _swap_int16_t\n#define _swap_int16_t(a, b) { int16_t t = a; a = b; b = t; }\n#endif\n#ifndef _swap_uint16_t\n#define _swap_uint16_t(a, b) { uint16_t t = a; a = b; b = t; }\n#endif\n\n/**************************************************************************\n    Sharp Memory Display Connector\n    -----------------------------------------------------------------------\n    Pin   Function        Notes\n    ===   ==============  ===============================\n      1   VIN             3.3-5.0V (into LDO supply)\n      2   3V3             3.3V out\n      3   GND\n      4   SCLK            Serial Clock\n      5   MOSI            Serial Data Input\n      6   CS              Serial Chip Select\n      9   EXTMODE         COM Inversion Select (Low = SW clock/serial)\n      7   EXTCOMIN        External COM Inversion Signal\n      8   DISP            Display On(High)/Off(Low)\n\n **************************************************************************/\n\n#define SHARPMEM_BIT_WRITECMD   (0x80)\n#define SHARPMEM_BIT_VCOM       (0x40)\n#define SHARPMEM_BIT_CLEAR      (0x20)\n#define TOGGLE_VCOM             do { _sharpmem_vcom = _sharpmem_vcom ? 0x00 : SHARPMEM_BIT_VCOM; } while(0);\n\nbyte *sharpmem_buffer;\n\nstatic SPISettings spiSettings(2000000, LSBFIRST, SPI_MODE0); //send data with 2MHz SPI clock with data sent from LSB first\nstatic SPIClass *_SPI;\n\n/* ************* */\n/* CONSTRUCTORS  */\n/* ************* */\nAdafruit_SharpMem::Adafruit_SharpMem(uint8_t clk, uint8_t mosi, uint8_t ss, uint16_t width, uint16_t height) :\nAdafruit_GFX(width, height) {\n  _clk  = clk;\n  _mosi = mosi;\n  _ss   = ss;\n}\n\nboolean Adafruit_SharpMem::begin(void) {\n  // Set pin state before direction to make sure they start this way (no glitching)\n  digitalWrite(_ss, HIGH);  \n  digitalWrite(_clk, LOW);  \n  digitalWrite(_mosi, HIGH);  \n  \n  pinMode(_ss, OUTPUT);\n  pinMode(_clk, OUTPUT);\n  pinMode(_mosi, OUTPUT);\n\n#if defined(USE_FAST_PINIO)\n  clkport     = portOutputRegister(digitalPinToPort(_clk));\n  clkpinmask  = digitalPinToBitMask(_clk);\n  dataport    = portOutputRegister(digitalPinToPort(_mosi));\n  datapinmask = digitalPinToBitMask(_mosi);\n#endif\n  _SPI = new SPIClass(HSPI);\n  _SPI->begin();\n  _SPI->setFrequency(8000000);  // 4 Mhz\n  // Set the vcom bit to a defined state\n  _sharpmem_vcom = SHARPMEM_BIT_VCOM;\n\n\n  sharpmem_buffer = (byte *)malloc((WIDTH * HEIGHT) / 8);\n\n  if (!sharpmem_buffer) return false;\n\n  setRotation(0);\n\n  return true;\n}\n\n/* *************** */\n/* PRIVATE METHODS */\n/* *************** */\n\n \n/**************************************************************************/\n/*!\n    @brief  Sends a single byte in pseudo-SPI.\n*/\n/**************************************************************************/\nvoid Adafruit_SharpMem::sendbyte(uint8_t data) \n{\n  _SPI->beginTransaction(SPISettings(8000000, MSBFIRST, SPI_MODE0));\n  _SPI->transfer(data);\n  _SPI->endTransaction();\n}\n\nvoid Adafruit_SharpMem::sendbyteLSB(uint8_t data) \n{\n  _SPI->beginTransaction(SPISettings(8000000, LSBFIRST, SPI_MODE0));\n  _SPI->transfer(data);\n  _SPI->endTransaction();\n}\n\n/* ************** */\n/* PUBLIC METHODS */\n/* ************** */\n\n// 1<<n is a costly operation on AVR -- table usu. smaller & faster\nstatic const uint8_t PROGMEM\n  set[] = {  1,  2,  4,  8,  16,  32,  64,  128 },\n  clr[] = { (uint8_t)~1 , (uint8_t)~2 , (uint8_t)~4 , (uint8_t)~8,\n            (uint8_t)~16, (uint8_t)~32, (uint8_t)~64, (uint8_t)~128 };\n\n/**************************************************************************/\n/*! \n    @brief Draws a single pixel in image buffer\n\n    @param[in]  x\n                The x position (0 based)\n    @param[in]  y\n                The y position (0 based)\n*/\n/**************************************************************************/\nvoid Adafruit_SharpMem::drawPixel(int16_t x, int16_t y, uint16_t color) \n{\n  if((x < 0) || (x >= _width) || (y < 0) || (y >= _height)) return;\n\n  switch(rotation) {\n   case 1:\n    _swap_int16_t(x, y);\n    x = WIDTH  - 1 - x;\n    break;\n   case 2:\n    x = WIDTH  - 1 - x;\n    y = HEIGHT - 1 - y;\n    break;\n   case 3:\n    _swap_int16_t(x, y);\n    y = HEIGHT - 1 - y;\n    break;\n  }\n\n  if(color) {\n    sharpmem_buffer[(y * WIDTH + x) / 8] |=\n      pgm_read_byte(&set[x & 7]);\n  } else {\n    sharpmem_buffer[(y * WIDTH + x) / 8] &=\n      pgm_read_byte(&clr[x & 7]);\n  }\n}\n\n/**************************************************************************/\n/*! \n    @brief Gets the value (1 or 0) of the specified pixel from the buffer\n\n    @param[in]  x\n                The x position (0 based)\n    @param[in]  y\n                The y position (0 based)\n\n    @return     1 if the pixel is enabled, 0 if disabled\n*/\n/**************************************************************************/\nuint8_t Adafruit_SharpMem::getPixel(uint16_t x, uint16_t y)\n{\n  if((x >= _width) || (y >= _height)) return 0; // <0 test not needed, unsigned\n\n  switch(rotation) {\n   case 1:\n    _swap_uint16_t(x, y);\n    x = WIDTH  - 1 - x;\n    break;\n   case 2:\n    x = WIDTH  - 1 - x;\n    y = HEIGHT - 1 - y;\n    break;\n   case 3:\n    _swap_uint16_t(x, y);\n    y = HEIGHT - 1 - y;\n    break;\n  }\n\n  return sharpmem_buffer[(y * WIDTH + x) / 8] &\n    pgm_read_byte(&set[x & 7]) ? 1 : 0;\n}\n\n/**************************************************************************/\n/*! \n    @brief Clears the screen\n*/\n/**************************************************************************/\nvoid Adafruit_SharpMem::clearDisplay() \n{\n  memset(sharpmem_buffer, 0xff, (WIDTH * HEIGHT) / 8);\n  // Send the clear screen command rather than doing a HW refresh (quicker)\n  digitalWrite(_ss, HIGH);\n  sendbyte(_sharpmem_vcom | SHARPMEM_BIT_CLEAR);\n  sendbyteLSB(0x00);\n  TOGGLE_VCOM;\n  digitalWrite(_ss, LOW);\n}\n\n/**************************************************************************/\n/*! \n    @brief Fills the screen\n*/\n/**************************************************************************/\nvoid Adafruit_SharpMem::fillScreen(uint16_t color) \n{\n  memset(sharpmem_buffer, color?0xFF:0x00, (WIDTH * HEIGHT) / 8);\n}\n\n/**************************************************************************/\n/*! \n    @brief Renders the contents of the pixel buffer on the LCD\n*/\n/**************************************************************************/\nvoid Adafruit_SharpMem::refresh(void) \n{\n  uint16_t i, totalbytes, currentline, oldline;  \n  totalbytes = (WIDTH * HEIGHT) / 8;\n\n  // Send the write command\n  digitalWrite(_ss, HIGH);\n  sendbyte(SHARPMEM_BIT_WRITECMD | _sharpmem_vcom);\n  TOGGLE_VCOM;\n\n  // Send the address for line 1\n  oldline = currentline = 1;\n  sendbyteLSB(currentline);\n\n  // Send image buffer\n  for (i=0; i<totalbytes; i++)\n  {\n    sendbyteLSB(sharpmem_buffer[i]);\n    currentline = ((i+1)/(WIDTH/8)) + 1;\n    if(currentline != oldline)\n    {\n      // Send end of line and address bytes\n      sendbyteLSB(0x00);\n      if (currentline <= HEIGHT)\n      {\n        sendbyteLSB(currentline);\n      }\n      oldline = currentline;\n    }\n  }\n\n  // Send another trailing 8 bits for the last line\n  sendbyteLSB(0x00);\n  digitalWrite(_ss, LOW);\n}\n"
  },
  {
    "path": "Adafruit_SHARP_Memory_Display/Adafruit_SharpMem.h",
    "content": "/*********************************************************************\nThis is an Arduino library for our Monochrome SHARP Memory Displays\n\n  Pick one up today in the adafruit shop!\n  ------> http://www.adafruit.com/products/1393\n\nThese displays use SPI to communicate, 3 pins are required to  \ninterface\n\nAdafruit invests time and resources providing this open source code, \nplease support Adafruit and open-source hardware by purchasing \nproducts from Adafruit!\n\nWritten by Limor Fried/Ladyada  for Adafruit Industries.  \nBSD license, check license.txt for more information\nAll text above, and the splash screen must be included in any redistribution\n*********************************************************************/\n#define BLACK 0\n#define WHITE 1\n\n#if ARDUINO >= 100\n #include \"Arduino.h\"\n#else\n #include \"WProgram.h\"\n#endif\n\n#if defined(RAMSTART) && defined(RAMEND) && ((RAMEND-RAMSTART) < 4096)\n  #warning \"Display may not work on devices with less than 4K RAM\"\n#endif\n \n#include <Adafruit_GFX.h>\n#ifdef __AVR\n  #include <avr/pgmspace.h>\n#elif defined(ESP8266)\n  #include <pgmspace.h>\n#endif\n\n#include <SPI.h>\n\n#if defined(ARDUINO_STM32_FEATHER)\n  typedef volatile uint32 RwReg;\n  //#define USE_FAST_PINIO\n#elif defined(ARDUINO_FEATHER52) || defined (ESP8266) || defined (ESP32) || defined(__SAM3X8E__) || defined(ARDUINO_ARCH_SAMD)\n  typedef volatile uint32_t RwReg;\n  #define USE_FAST_PINIO  // tested!\n#elif defined (__AVR__) || defined(TEENSYDUINO)\n  typedef volatile uint8_t RwReg;\n  #define USE_FAST_PINIO\n#else\n  #undef USE_FAST_PINIO  \n#endif\n\n\nclass Adafruit_SharpMem : public Adafruit_GFX {\n public:\n  Adafruit_SharpMem(uint8_t clk, uint8_t mosi, uint8_t ss, uint16_t w = 96, uint16_t h = 96);\n  boolean begin();\n  void drawPixel(int16_t x, int16_t y, uint16_t color);\n  uint8_t getPixel(uint16_t x, uint16_t y);\n  void clearDisplay();\n  void fillScreen(uint16_t color);\n  void refresh(void);\n\n private:\n  uint8_t _ss, _clk, _mosi;\n  uint32_t _sharpmem_vcom;\n\n#ifdef USE_FAST_PINIO\n  volatile RwReg *dataport, *clkport;\n  uint32_t datapinmask, clkpinmask;\n#endif\n  \n  void sendbyte(uint8_t data);\n  void sendbyteLSB(uint8_t data);\n};\n"
  },
  {
    "path": "Adafruit_SHARP_Memory_Display/README.txt",
    "content": "This is an Arduino library for our Monochrome SHARP Memory Displays\n\n  Pick one up today in the adafruit shop!\n  ------> http://www.adafruit.com/products/1393\n\nThese displays use SPI to communicate, 3 pins are required to  \ninterface\n\nTo install this library, check out our detailed library install tutorial:\nhttp://learn.adafruit.com/adafruit-all-about-arduino-libraries-install-use\n\nAlso requires the Adafruit GFX library, install the same way\nhttps://github.com/adafruit/Adafruit-GFX-Library\n\nAdafruit invests time and resources providing this open source code, \nplease support Adafruit and open-source hardware by purchasing \nproducts from Adafruit!\n\nWritten by Limor Fried & Kevin Townsend  for Adafruit Industries.  \nBSD license, check license.txt for more information\nAll text above, and the splash screen must be included in any redistribution"
  },
  {
    "path": "Eagle Files/Memory Display V2.brd",
    "content": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE eagle SYSTEM \"eagle.dtd\">\n<eagle version=\"7.7.0\">\n<drawing>\n<settings>\n<setting alwaysvectorfont=\"no\"/>\n<setting verticaltext=\"up\"/>\n</settings>\n<grid distance=\"25\" unitdist=\"mil\" unit=\"mil\" style=\"lines\" multiple=\"1\" display=\"yes\" altdistance=\"0.0125\" altunitdist=\"inch\" altunit=\"mil\"/>\n<layers>\n<layer number=\"1\" name=\"Top\" color=\"4\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"16\" name=\"Bottom\" color=\"1\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"17\" name=\"Pads\" color=\"2\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"18\" name=\"Vias\" color=\"2\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"19\" name=\"Unrouted\" color=\"6\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"20\" name=\"Dimension\" color=\"15\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"21\" name=\"tPlace\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"22\" name=\"bPlace\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"23\" name=\"tOrigins\" color=\"15\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"24\" name=\"bOrigins\" color=\"15\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"25\" name=\"tNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"26\" name=\"bNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"27\" name=\"tValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"28\" name=\"bValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"29\" name=\"tStop\" color=\"7\" fill=\"3\" visible=\"no\" active=\"yes\"/>\n<layer number=\"30\" name=\"bStop\" color=\"7\" fill=\"6\" visible=\"no\" active=\"yes\"/>\n<layer number=\"31\" name=\"tCream\" color=\"7\" fill=\"4\" visible=\"no\" active=\"yes\"/>\n<layer number=\"32\" name=\"bCream\" color=\"7\" fill=\"5\" visible=\"no\" active=\"yes\"/>\n<layer number=\"33\" name=\"tFinish\" color=\"6\" fill=\"3\" visible=\"no\" active=\"yes\"/>\n<layer number=\"34\" name=\"bFinish\" color=\"6\" fill=\"6\" visible=\"no\" active=\"yes\"/>\n<layer number=\"35\" name=\"tGlue\" color=\"7\" fill=\"4\" visible=\"no\" active=\"yes\"/>\n<layer number=\"36\" name=\"bGlue\" color=\"7\" fill=\"5\" visible=\"no\" active=\"yes\"/>\n<layer number=\"37\" name=\"tTest\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"38\" name=\"bTest\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"39\" name=\"tKeepout\" color=\"4\" fill=\"11\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"40\" name=\"bKeepout\" color=\"1\" fill=\"11\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"41\" name=\"tRestrict\" color=\"4\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"42\" name=\"bRestrict\" color=\"1\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"43\" name=\"vRestrict\" color=\"2\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"44\" name=\"Drills\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"45\" name=\"Holes\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"46\" name=\"Milling\" color=\"3\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"47\" name=\"Measures\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"48\" name=\"Document\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"49\" name=\"Reference\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"50\" name=\"dxf\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"51\" name=\"tDocu\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"52\" name=\"bDocu\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"53\" name=\"tGND_GNDA\" color=\"7\" fill=\"9\" visible=\"no\" active=\"no\"/>\n<layer number=\"54\" name=\"bGND_GNDA\" color=\"1\" fill=\"9\" visible=\"no\" active=\"no\"/>\n<layer number=\"56\" name=\"wert\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"57\" name=\"tCAD\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"59\" name=\"tCarbon\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"60\" name=\"bCarbon\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"88\" name=\"SimResults\" color=\"9\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"89\" name=\"SimProbes\" color=\"9\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"90\" name=\"Modules\" color=\"5\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"91\" name=\"Nets\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"92\" name=\"Busses\" color=\"1\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"93\" name=\"Pins\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"94\" name=\"Symbols\" color=\"4\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"95\" name=\"Names\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"96\" name=\"Values\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"97\" name=\"Info\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"98\" name=\"Guide\" color=\"6\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"99\" name=\"SpiceOrder\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"100\" name=\"Muster\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"101\" name=\"Patch_Top\" color=\"12\" fill=\"4\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"102\" name=\"Vscore\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"103\" name=\"fp3\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"104\" name=\"Name\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"105\" name=\"Beschreib\" color=\"9\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"106\" name=\"BGA-Top\" color=\"4\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"107\" name=\"BD-Top\" color=\"5\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"108\" name=\"fp8\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"109\" name=\"fp9\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"110\" name=\"fp0\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"111\" name=\"LPC17xx\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"112\" name=\"tSilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"113\" name=\"ReferenceLS\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"114\" name=\"Badge_Outline\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"115\" name=\"ReferenceISLANDS\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"116\" name=\"Patch_BOT\" color=\"9\" fill=\"4\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"118\" name=\"Rect_Pads\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"120\" name=\"tCream2\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"121\" name=\"_tsilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"122\" name=\"_bsilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"123\" name=\"tTestmark\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"124\" name=\"bTestmark\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"125\" name=\"_tNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"126\" name=\"_bNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"127\" name=\"_tValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"128\" name=\"_bValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"129\" name=\"Mask\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"131\" name=\"tAdjust\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"132\" name=\"bAdjust\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"144\" name=\"Drill_legend\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"150\" name=\"Notes\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"151\" name=\"HeatSink\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"152\" name=\"_bDocu\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"153\" name=\"FabDoc1\" color=\"6\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"154\" name=\"FabDoc2\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"155\" name=\"FabDoc3\" color=\"7\" fill=\"15\" visible=\"no\" active=\"no\"/>\n<layer number=\"199\" name=\"Contour\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"200\" name=\"200bmp\" color=\"1\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"201\" name=\"201bmp\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"202\" name=\"202bmp\" color=\"3\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"203\" name=\"203bmp\" color=\"4\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"204\" name=\"204bmp\" color=\"5\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"205\" name=\"205bmp\" color=\"6\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"206\" name=\"206bmp\" color=\"7\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"207\" name=\"207bmp\" color=\"8\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"208\" name=\"208bmp\" color=\"9\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"209\" name=\"209bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"210\" name=\"210bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"211\" name=\"211bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"212\" name=\"212bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"213\" name=\"213bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"214\" name=\"214bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"215\" name=\"215bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"216\" name=\"216bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"217\" name=\"217bmp\" color=\"18\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"218\" name=\"218bmp\" color=\"19\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"219\" name=\"219bmp\" color=\"20\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"220\" name=\"220bmp\" color=\"21\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"221\" name=\"221bmp\" color=\"22\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"222\" name=\"222bmp\" color=\"23\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"223\" name=\"223bmp\" color=\"24\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"224\" name=\"224bmp\" color=\"25\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"225\" name=\"225bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"226\" name=\"226bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"227\" name=\"227bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"228\" name=\"228bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"229\" name=\"229bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"230\" name=\"230bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"231\" name=\"Eagle3D_PG1\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"232\" name=\"Eagle3D_PG2\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"233\" name=\"Eagle3D_PG3\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"248\" name=\"Housing\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"249\" name=\"Edge\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"250\" name=\"Descript\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"251\" name=\"SMDround\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"254\" name=\"254bmp\" color=\"1\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"255\" name=\"routoute\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n</layers>\n<board>\n<plain>\n<wire x1=\"63\" y1=\"55\" x2=\"1\" y2=\"55\" width=\"0.254\" layer=\"20\"/>\n<wire x1=\"1\" y1=\"55\" x2=\"0\" y2=\"54\" width=\"0.254\" layer=\"20\" curve=\"90\"/>\n<wire x1=\"0\" y1=\"54\" x2=\"0\" y2=\"3\" width=\"0.254\" layer=\"20\"/>\n<wire x1=\"0\" y1=\"3\" x2=\"3\" y2=\"0\" width=\"0.254\" layer=\"20\" curve=\"90\"/>\n<wire x1=\"3\" y1=\"0\" x2=\"61\" y2=\"0\" width=\"0.254\" layer=\"20\"/>\n<wire x1=\"61\" y1=\"0\" x2=\"64\" y2=\"3\" width=\"0.254\" layer=\"20\" curve=\"90\"/>\n<wire x1=\"64\" y1=\"3\" x2=\"64\" y2=\"54\" width=\"0.254\" layer=\"20\"/>\n<wire x1=\"64\" y1=\"54\" x2=\"63\" y2=\"55\" width=\"0.254\" layer=\"20\" curve=\"90\"/>\n<dimension x1=\"0\" y1=\"-1\" x2=\"64\" y2=\"-1\" x3=\"32\" y3=\"-5\" textsize=\"1.778\" layer=\"48\"/>\n<dimension x1=\"65\" y1=\"0\" x2=\"65\" y2=\"55\" x3=\"68.999996875\" y3=\"27.5\" textsize=\"1.778\" layer=\"48\"/>\n<wire x1=\"63\" y1=\"11\" x2=\"63\" y2=\"54\" width=\"0.4064\" layer=\"25\"/>\n<wire x1=\"63\" y1=\"54\" x2=\"1\" y2=\"54\" width=\"0.4064\" layer=\"25\"/>\n<wire x1=\"1\" y1=\"54\" x2=\"1\" y2=\"11\" width=\"0.4064\" layer=\"25\"/>\n<wire x1=\"1\" y1=\"11\" x2=\"63\" y2=\"11\" width=\"0.4064\" layer=\"25\"/>\n<dimension x1=\"-1\" y1=\"54\" x2=\"-1\" y2=\"12\" x3=\"-3\" y3=\"33\" textsize=\"1.778\" layer=\"48\"/>\n<dimension x1=\"1\" y1=\"56\" x2=\"63\" y2=\"56\" x3=\"32\" y3=\"58\" textsize=\"1.778\" layer=\"48\"/>\n<wire x1=\"37.5\" y1=\"9\" x2=\"37.5\" y2=\"7\" width=\"0.4064\" layer=\"46\"/>\n<wire x1=\"37.5\" y1=\"7\" x2=\"36.5\" y2=\"6\" width=\"0.4064\" layer=\"46\" curve=\"-90\"/>\n<wire x1=\"36.5\" y1=\"6\" x2=\"27.5\" y2=\"6\" width=\"0.4064\" layer=\"46\"/>\n<wire x1=\"27.5\" y1=\"6\" x2=\"26.5\" y2=\"7\" width=\"0.4064\" layer=\"46\" curve=\"-90\"/>\n<wire x1=\"26.5\" y1=\"7\" x2=\"26.5\" y2=\"9\" width=\"0.4064\" layer=\"46\"/>\n<wire x1=\"26.5\" y1=\"9\" x2=\"27.5\" y2=\"10\" width=\"0.4064\" layer=\"46\" curve=\"-90\"/>\n<wire x1=\"27.5\" y1=\"10\" x2=\"36.5\" y2=\"10\" width=\"0.4064\" layer=\"46\"/>\n<wire x1=\"36.5\" y1=\"10\" x2=\"37.5\" y2=\"9\" width=\"0.4064\" layer=\"46\" curve=\"-90\"/>\n<rectangle x1=\"2\" y1=\"15\" x2=\"21\" y2=\"53\" layer=\"40\"/>\n<wire x1=\"2\" y1=\"52\" x2=\"2\" y2=\"16\" width=\"0.4064\" layer=\"26\"/>\n<wire x1=\"2\" y1=\"16\" x2=\"3\" y2=\"15\" width=\"0.4064\" layer=\"26\" curve=\"90\"/>\n<wire x1=\"3\" y1=\"15\" x2=\"20\" y2=\"15\" width=\"0.4064\" layer=\"26\"/>\n<wire x1=\"2\" y1=\"52\" x2=\"3\" y2=\"53\" width=\"0.4064\" layer=\"26\" curve=\"-90\"/>\n<wire x1=\"3\" y1=\"53\" x2=\"20\" y2=\"53\" width=\"0.4064\" layer=\"26\"/>\n<wire x1=\"20\" y1=\"53\" x2=\"21\" y2=\"52\" width=\"0.4064\" layer=\"26\" curve=\"-90\"/>\n<wire x1=\"20\" y1=\"15\" x2=\"21\" y2=\"16\" width=\"0.4064\" layer=\"26\" curve=\"90\"/>\n<wire x1=\"21\" y1=\"16\" x2=\"21\" y2=\"52\" width=\"0.4064\" layer=\"26\"/>\n<text x=\"11.365\" y=\"17.22\" size=\"1.6764\" layer=\"26\" rot=\"MR0\" align=\"center\">3.7V LiPo</text>\n<text x=\"50\" y=\"5.5\" size=\"1.27\" layer=\"26\" rot=\"MR180\" align=\"center\">REV2\nMaximilian Kern\n02/2020</text>\n<rectangle x1=\"4.3455\" y1=\"2.5223\" x2=\"5.0059\" y2=\"2.5731\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.0915\" y1=\"2.5731\" x2=\"5.2091\" y2=\"2.6239\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.8883\" y1=\"2.6239\" x2=\"5.4123\" y2=\"2.6747\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.7359\" y1=\"2.6747\" x2=\"5.5647\" y2=\"2.7255\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"2.7255\" x2=\"5.6663\" y2=\"2.7763\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.5327\" y1=\"2.7763\" x2=\"5.7679\" y2=\"2.8271\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.4819\" y1=\"2.8271\" x2=\"5.8695\" y2=\"2.8779\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.5327\" y1=\"2.8779\" x2=\"5.9711\" y2=\"2.9287\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.5327\" y1=\"2.9287\" x2=\"6.0727\" y2=\"2.9795\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.5835\" y1=\"2.9795\" x2=\"6.1235\" y2=\"3.0303\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.1075\" y1=\"3.0303\" x2=\"6.1743\" y2=\"3.0811\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.5835\" y1=\"3.0303\" x2=\"4.1931\" y2=\"3.0811\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.2599\" y1=\"3.0811\" x2=\"6.2251\" y2=\"3.1319\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.0811\" x2=\"4.0407\" y2=\"3.1319\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.4123\" y1=\"3.1319\" x2=\"6.3267\" y2=\"3.1827\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.1319\" x2=\"3.8883\" y2=\"3.1827\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.5647\" y1=\"3.1827\" x2=\"6.3775\" y2=\"3.2335\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6851\" y1=\"3.1827\" x2=\"3.7867\" y2=\"3.2335\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.6155\" y1=\"3.2335\" x2=\"6.4283\" y2=\"3.2843\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.7171\" y1=\"3.2843\" x2=\"6.4791\" y2=\"3.3351\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.7679\" y1=\"3.3351\" x2=\"6.5299\" y2=\"3.3859\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.8695\" y1=\"3.3859\" x2=\"6.5299\" y2=\"3.4367\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.9203\" y1=\"3.4367\" x2=\"6.5807\" y2=\"3.4875\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.9711\" y1=\"3.4875\" x2=\"6.6315\" y2=\"3.5383\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.0219\" y1=\"3.5383\" x2=\"6.6823\" y2=\"3.5891\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.0727\" y1=\"3.5891\" x2=\"6.7331\" y2=\"3.6399\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.1235\" y1=\"3.6399\" x2=\"6.7331\" y2=\"3.6907\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.1743\" y1=\"3.6907\" x2=\"6.7839\" y2=\"3.7415\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.2251\" y1=\"3.7415\" x2=\"6.6823\" y2=\"3.7923\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.7415\" x2=\"5.6663\" y2=\"3.7923\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.2759\" y1=\"3.7923\" x2=\"6.5807\" y2=\"3.8431\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.7923\" x2=\"5.6663\" y2=\"3.8431\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.2759\" y1=\"3.8431\" x2=\"6.5299\" y2=\"3.8939\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.8431\" x2=\"5.6663\" y2=\"3.8939\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.3267\" y1=\"3.8939\" x2=\"6.4283\" y2=\"3.9447\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.8939\" x2=\"5.6663\" y2=\"3.9447\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.9447\" x2=\"5.6663\" y2=\"3.9955\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.9955\" x2=\"5.6663\" y2=\"4.0463\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.0463\" x2=\"5.6663\" y2=\"4.0971\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.0971\" x2=\"5.6663\" y2=\"4.1479\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.1479\" x2=\"5.6663\" y2=\"4.1987\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.1987\" x2=\"5.6663\" y2=\"4.2495\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.2495\" x2=\"5.6663\" y2=\"4.3003\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.3003\" x2=\"4.9043\" y2=\"4.3511\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.3511\" x2=\"4.9043\" y2=\"4.4019\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.4019\" x2=\"4.9551\" y2=\"4.4527\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.4527\" x2=\"5.0567\" y2=\"4.5035\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.5035\" x2=\"5.1075\" y2=\"4.5543\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.5543\" x2=\"5.1583\" y2=\"4.6051\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.6051\" x2=\"5.2599\" y2=\"4.6559\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2947\" y1=\"4.6559\" x2=\"5.3107\" y2=\"4.7067\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2947\" y1=\"4.7067\" x2=\"5.3615\" y2=\"4.7575\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.3455\" y1=\"4.7575\" x2=\"5.4123\" y2=\"4.8083\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.4471\" y1=\"4.8083\" x2=\"5.4631\" y2=\"4.8591\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.4979\" y1=\"4.8591\" x2=\"5.5647\" y2=\"4.9099\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.5487\" y1=\"4.9099\" x2=\"5.6155\" y2=\"4.9607\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.5995\" y1=\"4.9607\" x2=\"5.6663\" y2=\"5.0115\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"5.0115\" x2=\"5.7679\" y2=\"5.0623\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.0623\" x2=\"7.1395\" y2=\"5.1131\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7519\" y1=\"5.0623\" x2=\"5.8187\" y2=\"5.1131\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.1131\" x2=\"7.1395\" y2=\"5.1639\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.8027\" y1=\"5.1131\" x2=\"5.8695\" y2=\"5.1639\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.1639\" x2=\"7.1395\" y2=\"5.2147\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.8535\" y1=\"5.1639\" x2=\"5.9203\" y2=\"5.2147\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.2147\" x2=\"7.1395\" y2=\"5.2655\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.9551\" y1=\"5.2147\" x2=\"5.9711\" y2=\"5.2655\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.2655\" x2=\"7.1395\" y2=\"5.3163\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.0059\" y1=\"5.2655\" x2=\"5.9711\" y2=\"5.3163\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.3163\" x2=\"7.0887\" y2=\"5.3671\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.0567\" y1=\"5.3163\" x2=\"6.0219\" y2=\"5.3671\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.3671\" x2=\"7.0887\" y2=\"5.4179\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.1075\" y1=\"5.3671\" x2=\"6.0219\" y2=\"5.4179\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.4179\" x2=\"7.0887\" y2=\"5.4687\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.0567\" y1=\"5.4179\" x2=\"6.0219\" y2=\"5.4687\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.4687\" x2=\"7.0887\" y2=\"5.5195\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.9043\" y1=\"5.4687\" x2=\"6.0219\" y2=\"5.5195\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.5195\" x2=\"7.0887\" y2=\"5.5703\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7519\" y1=\"5.5195\" x2=\"5.9711\" y2=\"5.5703\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.5703\" x2=\"7.0379\" y2=\"5.6211\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.5995\" y1=\"5.5703\" x2=\"5.9711\" y2=\"5.6211\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5299\" y1=\"5.6211\" x2=\"7.0379\" y2=\"5.6719\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.4471\" y1=\"5.6211\" x2=\"5.9203\" y2=\"5.6719\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5299\" y1=\"5.6719\" x2=\"7.0379\" y2=\"5.7227\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2947\" y1=\"5.6719\" x2=\"5.8695\" y2=\"5.7227\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.7227\" x2=\"7.0379\" y2=\"5.7735\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.1423\" y1=\"5.7227\" x2=\"5.4123\" y2=\"5.7735\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.7735\" x2=\"6.9871\" y2=\"5.8243\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.0407\" y1=\"5.7735\" x2=\"5.2091\" y2=\"5.8243\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.8243\" x2=\"6.9871\" y2=\"5.8751\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.9899\" y1=\"5.8243\" x2=\"5.1075\" y2=\"5.8751\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.4283\" y1=\"5.8751\" x2=\"6.9871\" y2=\"5.9259\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"5.8751\" x2=\"4.9551\" y2=\"5.9259\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.3775\" y1=\"5.9259\" x2=\"6.9363\" y2=\"5.9767\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"5.9259\" x2=\"4.8027\" y2=\"5.9767\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.9767\" x2=\"6.9363\" y2=\"6.0275\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"5.9767\" x2=\"4.6503\" y2=\"6.0275\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"6.0275\" x2=\"6.8855\" y2=\"6.0783\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"6.0275\" x2=\"4.4979\" y2=\"6.0783\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6823\" y1=\"6.0783\" x2=\"6.8855\" y2=\"6.1291\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.0407\" y1=\"6.0783\" x2=\"4.3455\" y2=\"6.1291\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.8723\" y1=\"6.0783\" x2=\"2.9739\" y2=\"6.1291\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.7331\" y1=\"6.1291\" x2=\"6.8347\" y2=\"6.1799\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.7707\" y1=\"6.1291\" x2=\"3.0247\" y2=\"6.1799\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.7199\" y1=\"6.1799\" x2=\"3.0755\" y2=\"6.2307\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.6183\" y1=\"6.2307\" x2=\"3.1263\" y2=\"6.2815\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.5675\" y1=\"6.2815\" x2=\"3.1771\" y2=\"6.3323\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.5675\" y1=\"6.3323\" x2=\"3.1771\" y2=\"6.3831\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.6183\" y1=\"6.3831\" x2=\"3.2279\" y2=\"6.4339\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.6691\" y1=\"6.4339\" x2=\"3.2787\" y2=\"6.4847\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.6691\" y1=\"6.4847\" x2=\"3.3803\" y2=\"6.5355\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.7199\" y1=\"6.5355\" x2=\"3.4311\" y2=\"6.5863\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.7707\" y1=\"6.5863\" x2=\"3.4819\" y2=\"6.6371\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.8215\" y1=\"6.6371\" x2=\"3.5327\" y2=\"6.6879\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.8723\" y1=\"6.6879\" x2=\"3.6343\" y2=\"6.7387\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.8723\" y1=\"6.7387\" x2=\"3.5835\" y2=\"6.7895\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.5139\" y1=\"6.7895\" x2=\"5.6155\" y2=\"6.8403\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.9739\" y1=\"6.7895\" x2=\"3.5327\" y2=\"6.8403\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.3615\" y1=\"6.8403\" x2=\"5.6663\" y2=\"6.8911\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.0247\" y1=\"6.8403\" x2=\"3.5327\" y2=\"6.8911\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.2091\" y1=\"6.8911\" x2=\"5.7171\" y2=\"6.9419\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.0755\" y1=\"6.8911\" x2=\"3.4819\" y2=\"6.9419\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.0059\" y1=\"6.9419\" x2=\"5.7171\" y2=\"6.9927\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.1263\" y1=\"6.9419\" x2=\"3.4819\" y2=\"6.9927\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"6.9927\" x2=\"5.7679\" y2=\"7.0435\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.1771\" y1=\"6.9927\" x2=\"3.4311\" y2=\"7.0435\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.0435\" x2=\"5.7679\" y2=\"7.0943\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.2787\" y1=\"7.0435\" x2=\"3.4311\" y2=\"7.0943\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.0943\" x2=\"5.8187\" y2=\"7.1451\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.3295\" y1=\"7.0943\" x2=\"3.3803\" y2=\"7.1451\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.1451\" x2=\"5.8187\" y2=\"7.1959\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.1959\" x2=\"5.7679\" y2=\"7.2467\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.2467\" x2=\"5.6663\" y2=\"7.2975\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.2975\" x2=\"5.5647\" y2=\"7.3483\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.3483\" x2=\"5.4123\" y2=\"7.3991\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.3991\" x2=\"5.2091\" y2=\"7.4499\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.4499\" x2=\"5.0059\" y2=\"7.5007\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"60.62495\" y1=\"33.37824375\" x2=\"65.36713125\" y2=\"33.42040625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.455659375\" y1=\"33.378115625\" x2=\"65.451840625\" y2=\"33.420534375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.37133125\" y1=\"33.3793875\" x2=\"65.45133125\" y2=\"33.42180625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.28713125\" y1=\"33.37824375\" x2=\"65.45095\" y2=\"33.42040625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.201659375\" y1=\"33.378115625\" x2=\"65.451840625\" y2=\"33.420534375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.21283125\" y1=\"35.4748875\" x2=\"63.35583125\" y2=\"35.51730625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.87933125\" y1=\"32.6173875\" x2=\"64.68933125\" y2=\"32.65980625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.254359375\" y1=\"35.558834375\" x2=\"63.229721875\" y2=\"35.600996875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.381359375\" y1=\"34.034834375\" x2=\"63.102721875\" y2=\"34.076996875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.277221875\" y1=\"32.828334375\" x2=\"63.206859375\" y2=\"32.870496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.107040625\" y1=\"31.347515625\" x2=\"63.377040625\" y2=\"31.389678125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.25525\" y1=\"35.6018875\" x2=\"63.14425\" y2=\"35.64430625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.38225\" y1=\"33.991525\" x2=\"63.01725\" y2=\"34.03394375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.23493125\" y1=\"32.82820625\" x2=\"63.16456875\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.06475\" y1=\"31.3473875\" x2=\"63.33475\" y2=\"31.38980625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.21283125\" y1=\"35.642525\" x2=\"63.10183125\" y2=\"35.68494375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.381740625\" y1=\"33.949615625\" x2=\"62.932921875\" y2=\"33.992034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.1925125\" y1=\"32.82820625\" x2=\"63.12215\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.000740625\" y1=\"31.325796875\" x2=\"63.313921875\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.19213125\" y1=\"35.66424375\" x2=\"63.03795\" y2=\"35.70640625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.361040625\" y1=\"33.928153125\" x2=\"62.869040625\" y2=\"33.970315625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.150221875\" y1=\"32.828334375\" x2=\"63.079859375\" y2=\"32.870496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.95845\" y1=\"31.325925\" x2=\"63.27163125\" y2=\"31.3680875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.17143125\" y1=\"35.68570625\" x2=\"62.97406875\" y2=\"35.728125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.33906875\" y1=\"33.90770625\" x2=\"62.80643125\" y2=\"33.950125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.10793125\" y1=\"32.82820625\" x2=\"63.03756875\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.916159375\" y1=\"31.325796875\" x2=\"63.229340625\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.14933125\" y1=\"35.706025\" x2=\"62.91133125\" y2=\"35.74844375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.318240625\" y1=\"33.886115625\" x2=\"62.742421875\" y2=\"33.928534375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.0655125\" y1=\"32.82820625\" x2=\"62.99515\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.873740625\" y1=\"31.325796875\" x2=\"63.186921875\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.12863125\" y1=\"35.72774375\" x2=\"62.84745\" y2=\"35.76990625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.33945\" y1=\"34.71174375\" x2=\"62.63663125\" y2=\"34.75390625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.27595\" y1=\"33.88624375\" x2=\"62.70013125\" y2=\"33.92840625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.023221875\" y1=\"32.828334375\" x2=\"62.952859375\" y2=\"32.870496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.83145\" y1=\"31.325925\" x2=\"63.14463125\" y2=\"31.3680875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.086340625\" y1=\"35.727615625\" x2=\"62.805159375\" y2=\"35.770034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.23493125\" y1=\"34.73320625\" x2=\"62.65656875\" y2=\"34.775625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.25525\" y1=\"33.864525\" x2=\"62.63625\" y2=\"33.90694375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.98093125\" y1=\"32.82820625\" x2=\"62.91056875\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.789159375\" y1=\"31.325796875\" x2=\"63.102340625\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.0655125\" y1=\"35.74920625\" x2=\"62.74115\" y2=\"35.791625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.14933125\" y1=\"34.73320625\" x2=\"62.65733125\" y2=\"34.775625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.21283125\" y1=\"33.864525\" x2=\"62.59383125\" y2=\"33.90694375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.9385125\" y1=\"32.82820625\" x2=\"62.86815\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.746740625\" y1=\"31.325796875\" x2=\"63.059921875\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.023221875\" y1=\"35.749334375\" x2=\"62.698859375\" y2=\"35.791496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.063859375\" y1=\"34.733334375\" x2=\"62.658221875\" y2=\"34.775496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.190859375\" y1=\"33.844334375\" x2=\"62.531221875\" y2=\"33.886496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.896221875\" y1=\"32.828334375\" x2=\"62.825859375\" y2=\"32.870496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.70445\" y1=\"31.325925\" x2=\"63.01763125\" y2=\"31.3680875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.00125\" y1=\"35.769525\" x2=\"62.63625\" y2=\"35.81194375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.00125\" y1=\"34.7128875\" x2=\"62.63625\" y2=\"34.75530625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.14856875\" y1=\"33.84420625\" x2=\"62.48893125\" y2=\"33.886625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.85393125\" y1=\"32.82820625\" x2=\"62.78356875\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.662159375\" y1=\"31.325796875\" x2=\"62.975340625\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.95883125\" y1=\"35.769525\" x2=\"62.59383125\" y2=\"35.81194375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.95883125\" y1=\"34.7128875\" x2=\"62.59383125\" y2=\"34.75530625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.10615\" y1=\"33.84420625\" x2=\"62.4465125\" y2=\"33.886625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.8115125\" y1=\"32.82820625\" x2=\"62.74115\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.619740625\" y1=\"31.325796875\" x2=\"62.932921875\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.916540625\" y1=\"35.769653125\" x2=\"62.551540625\" y2=\"35.811815625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.896221875\" y1=\"34.733334375\" x2=\"62.571859375\" y2=\"34.775496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.08545\" y1=\"33.82274375\" x2=\"62.38263125\" y2=\"33.86490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.769221875\" y1=\"32.828334375\" x2=\"62.698859375\" y2=\"32.870496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.57745\" y1=\"31.325925\" x2=\"62.89063125\" y2=\"31.3680875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.87425\" y1=\"35.769525\" x2=\"62.50925\" y2=\"35.81194375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.832340625\" y1=\"34.711615625\" x2=\"62.551159375\" y2=\"34.754034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.043159375\" y1=\"33.822615625\" x2=\"62.340340625\" y2=\"33.865034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.72693125\" y1=\"32.82820625\" x2=\"62.65656875\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.535159375\" y1=\"31.325796875\" x2=\"62.848340625\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.83183125\" y1=\"35.769525\" x2=\"62.46683125\" y2=\"35.81194375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.789921875\" y1=\"34.711615625\" x2=\"62.508740625\" y2=\"34.754034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.000740625\" y1=\"33.822615625\" x2=\"62.297921875\" y2=\"33.865034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.6845125\" y1=\"32.82820625\" x2=\"62.61415\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.492740625\" y1=\"31.325796875\" x2=\"62.805921875\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.81113125\" y1=\"35.79124375\" x2=\"62.40295\" y2=\"35.83340625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.74763125\" y1=\"34.71174375\" x2=\"62.46645\" y2=\"34.75390625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.95845\" y1=\"33.82274375\" x2=\"62.25563125\" y2=\"33.86490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.959721875\" y1=\"32.510834375\" x2=\"62.254359375\" y2=\"32.552996875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.74763125\" y1=\"31.02874375\" x2=\"62.46645\" y2=\"31.07090625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.768840625\" y1=\"35.791115625\" x2=\"62.360659375\" y2=\"35.833534375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.705340625\" y1=\"34.711615625\" x2=\"62.424159375\" y2=\"34.754034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.916159375\" y1=\"33.822615625\" x2=\"62.213340625\" y2=\"33.865034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.91743125\" y1=\"32.51070625\" x2=\"62.21206875\" y2=\"32.553125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.705340625\" y1=\"31.028615625\" x2=\"62.424159375\" y2=\"31.071034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.726421875\" y1=\"35.791115625\" x2=\"62.318240625\" y2=\"35.833534375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.662921875\" y1=\"34.711615625\" x2=\"62.381740625\" y2=\"34.754034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.873740625\" y1=\"33.822615625\" x2=\"62.170921875\" y2=\"33.865034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.8750125\" y1=\"32.51070625\" x2=\"62.16965\" y2=\"32.553125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.662921875\" y1=\"31.028615625\" x2=\"62.381740625\" y2=\"31.071034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.68413125\" y1=\"35.79124375\" x2=\"62.27595\" y2=\"35.83340625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.62063125\" y1=\"34.71174375\" x2=\"62.33945\" y2=\"34.75390625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.83145\" y1=\"33.82274375\" x2=\"62.12863125\" y2=\"33.86490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.832721875\" y1=\"32.510834375\" x2=\"62.127359375\" y2=\"32.552996875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.62063125\" y1=\"31.02874375\" x2=\"62.33945\" y2=\"31.07090625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.62025\" y1=\"35.769525\" x2=\"62.25525\" y2=\"35.81194375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.578340625\" y1=\"34.711615625\" x2=\"62.297159375\" y2=\"34.754034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.789159375\" y1=\"33.822615625\" x2=\"62.086340625\" y2=\"33.865034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.79043125\" y1=\"32.51070625\" x2=\"62.08506875\" y2=\"32.553125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.578340625\" y1=\"31.028615625\" x2=\"62.297159375\" y2=\"31.071034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.57783125\" y1=\"35.769525\" x2=\"62.21283125\" y2=\"35.81194375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.535921875\" y1=\"34.711615625\" x2=\"62.254740625\" y2=\"34.754034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.746740625\" y1=\"33.822615625\" x2=\"62.043921875\" y2=\"33.865034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.7480125\" y1=\"32.51070625\" x2=\"62.04265\" y2=\"32.553125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.535921875\" y1=\"31.028615625\" x2=\"62.254740625\" y2=\"31.071034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.535540625\" y1=\"35.769653125\" x2=\"62.170540625\" y2=\"35.811815625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.515221875\" y1=\"34.733334375\" x2=\"62.190859375\" y2=\"34.775496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.70445\" y1=\"33.82274375\" x2=\"62.00163125\" y2=\"33.86490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.388221875\" y1=\"32.828334375\" x2=\"62.317859375\" y2=\"32.870496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.19645\" y1=\"31.325925\" x2=\"62.50963125\" y2=\"31.3680875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.49325\" y1=\"35.769525\" x2=\"62.12825\" y2=\"35.81194375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.49325\" y1=\"34.7128875\" x2=\"62.12825\" y2=\"34.75530625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.64056875\" y1=\"33.84420625\" x2=\"61.98093125\" y2=\"33.886625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.34593125\" y1=\"32.82820625\" x2=\"62.27556875\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.154159375\" y1=\"31.325796875\" x2=\"62.467340625\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.45083125\" y1=\"35.769525\" x2=\"62.08583125\" y2=\"35.81194375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.45083125\" y1=\"34.7128875\" x2=\"62.08583125\" y2=\"34.75530625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.59815\" y1=\"33.84420625\" x2=\"61.9385125\" y2=\"33.886625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.3035125\" y1=\"32.82820625\" x2=\"62.23315\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.111740625\" y1=\"31.325796875\" x2=\"62.424921875\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.388221875\" y1=\"35.749334375\" x2=\"62.063859375\" y2=\"35.791496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.428859375\" y1=\"34.733334375\" x2=\"62.023221875\" y2=\"34.775496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.555859375\" y1=\"33.844334375\" x2=\"61.896221875\" y2=\"33.886496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.261221875\" y1=\"32.828334375\" x2=\"62.190859375\" y2=\"32.870496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.06945\" y1=\"31.325925\" x2=\"62.38263125\" y2=\"31.3680875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.34593125\" y1=\"35.74920625\" x2=\"62.02156875\" y2=\"35.791625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.42975\" y1=\"34.73320625\" x2=\"61.93775\" y2=\"34.775625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.49325\" y1=\"33.864525\" x2=\"61.87425\" y2=\"33.90694375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.21893125\" y1=\"32.82820625\" x2=\"62.14856875\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.027159375\" y1=\"31.325796875\" x2=\"62.340340625\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.281921875\" y1=\"35.727615625\" x2=\"62.000740625\" y2=\"35.770034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.408921875\" y1=\"34.711615625\" x2=\"61.873740625\" y2=\"34.754034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.45083125\" y1=\"33.864525\" x2=\"61.83183125\" y2=\"33.90694375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.1765125\" y1=\"32.82820625\" x2=\"62.10615\" y2=\"32.870625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.984740625\" y1=\"31.325796875\" x2=\"62.297921875\" y2=\"31.368215625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.23963125\" y1=\"35.72774375\" x2=\"61.95845\" y2=\"35.76990625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.428859375\" y1=\"34.733334375\" x2=\"61.769221875\" y2=\"34.775496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.38695\" y1=\"33.88624375\" x2=\"61.81113125\" y2=\"33.92840625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.134221875\" y1=\"32.828334375\" x2=\"62.063859375\" y2=\"32.870496875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.94245\" y1=\"31.325925\" x2=\"62.25563125\" y2=\"31.3680875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.17575\" y1=\"35.706025\" x2=\"61.93775\" y2=\"35.74844375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.344659375\" y1=\"33.886115625\" x2=\"61.768840625\" y2=\"33.928534375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.42975\" y1=\"32.4903875\" x2=\"61.68375\" y2=\"32.53280625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.23925\" y1=\"30.98670625\" x2=\"61.87425\" y2=\"31.029125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.1130125\" y1=\"35.68570625\" x2=\"61.91565\" y2=\"35.728125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.28065\" y1=\"33.90770625\" x2=\"61.7480125\" y2=\"33.950125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.38733125\" y1=\"32.4903875\" x2=\"61.64133125\" y2=\"32.53280625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.19683125\" y1=\"30.98670625\" x2=\"61.83183125\" y2=\"31.029125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.04913125\" y1=\"35.66424375\" x2=\"61.89495\" y2=\"35.70640625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.218040625\" y1=\"33.928153125\" x2=\"61.726040625\" y2=\"33.970315625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.345040625\" y1=\"32.490515625\" x2=\"61.599040625\" y2=\"32.532678125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.154540625\" y1=\"30.986834375\" x2=\"61.789540625\" y2=\"31.028996875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.98525\" y1=\"35.642525\" x2=\"61.87425\" y2=\"35.68494375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.154159375\" y1=\"33.949615625\" x2=\"61.705340625\" y2=\"33.992034375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.30275\" y1=\"32.4903875\" x2=\"61.55675\" y2=\"32.53280625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.11225\" y1=\"30.98670625\" x2=\"61.74725\" y2=\"31.029125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.9225125\" y1=\"35.62220625\" x2=\"61.85215\" y2=\"35.664625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.06983125\" y1=\"33.991525\" x2=\"61.70483125\" y2=\"34.03394375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.26033125\" y1=\"32.4903875\" x2=\"61.51433125\" y2=\"32.53280625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.06983125\" y1=\"30.98670625\" x2=\"61.70483125\" y2=\"31.029125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.857359375\" y1=\"35.558834375\" x2=\"61.832721875\" y2=\"35.600996875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.984359375\" y1=\"34.034834375\" x2=\"61.705721875\" y2=\"34.076996875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.218040625\" y1=\"32.490515625\" x2=\"61.472040625\" y2=\"32.532678125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.04913125\" y1=\"31.008425\" x2=\"61.64095\" y2=\"31.0505875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.73125\" y1=\"35.4748875\" x2=\"61.87425\" y2=\"35.51730625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"59.39775\" y1=\"32.6173875\" x2=\"63.20775\" y2=\"32.65980625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"58.59333125\" y1=\"33.3793875\" x2=\"63.92733125\" y2=\"33.42180625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"58.59295\" y1=\"33.37824375\" x2=\"63.84313125\" y2=\"33.42040625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"58.593840625\" y1=\"33.378115625\" x2=\"63.757659375\" y2=\"33.420534375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"58.59333125\" y1=\"33.3793875\" x2=\"63.67333125\" y2=\"33.42180625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"58.59295\" y1=\"33.37824375\" x2=\"63.58913125\" y2=\"33.42040625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"58.677659375\" y1=\"33.378115625\" x2=\"63.419840625\" y2=\"33.420534375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.454409375\" y1=\"46.735828125\" x2=\"64.545590625\" y2=\"46.777990625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.28511875\" y1=\"46.7357\" x2=\"64.6303\" y2=\"46.77811875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.200790625\" y1=\"46.736971875\" x2=\"64.629790625\" y2=\"46.779390625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.116590625\" y1=\"46.735828125\" x2=\"64.629409375\" y2=\"46.777990625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.03111875\" y1=\"46.7357\" x2=\"64.6303\" y2=\"46.77811875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.364109375\" y1=\"48.154290625\" x2=\"63.212471875\" y2=\"48.196709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.561471875\" y1=\"46.122290625\" x2=\"64.015109375\" y2=\"46.164709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.406909375\" y1=\"48.239509375\" x2=\"63.085090625\" y2=\"48.281671875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.386590625\" y1=\"46.862828125\" x2=\"63.105409375\" y2=\"46.904990625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.44881875\" y1=\"45.86841875\" x2=\"63.04318125\" y2=\"45.91058125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.59868125\" y1=\"45.04291875\" x2=\"62.89331875\" y2=\"45.08508125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.406528125\" y1=\"48.281290625\" x2=\"63.000890625\" y2=\"48.323709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.386209375\" y1=\"46.820790625\" x2=\"63.021209375\" y2=\"46.863209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.42811875\" y1=\"45.88988125\" x2=\"62.9793\" y2=\"45.9323\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.556390625\" y1=\"45.042790625\" x2=\"62.851028125\" y2=\"45.085209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.36538125\" y1=\"48.3232\" x2=\"62.9572\" y2=\"48.36561875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.3857\" y1=\"46.77888125\" x2=\"62.93688125\" y2=\"46.8213\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.3857\" y1=\"45.88988125\" x2=\"62.93688125\" y2=\"45.9323\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.49238125\" y1=\"45.0212\" x2=\"62.8302\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.34468125\" y1=\"48.34491875\" x2=\"62.89331875\" y2=\"48.38708125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.365\" y1=\"46.75741875\" x2=\"62.873\" y2=\"46.79958125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.365\" y1=\"45.9116\" x2=\"62.873\" y2=\"45.9537625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.450090625\" y1=\"45.021328125\" x2=\"62.787909375\" y2=\"45.063490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.322709375\" y1=\"48.365109375\" x2=\"62.830709375\" y2=\"48.407528125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.3443\" y1=\"46.7357\" x2=\"62.80911875\" y2=\"46.77811875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.322709375\" y1=\"45.911471875\" x2=\"62.830709375\" y2=\"45.953890625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.4078\" y1=\"45.0212\" x2=\"62.74561875\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.30188125\" y1=\"48.3867\" x2=\"62.7667\" y2=\"48.42911875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.3222\" y1=\"46.71538125\" x2=\"62.74638125\" y2=\"46.7578\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.300609375\" y1=\"45.931790625\" x2=\"62.767971875\" y2=\"45.974209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.36538125\" y1=\"45.0212\" x2=\"62.7032\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.28118125\" y1=\"48.40841875\" x2=\"62.70281875\" y2=\"48.45058125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.323090625\" y1=\"47.561328125\" x2=\"62.660909375\" y2=\"47.603490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.279909375\" y1=\"46.715509375\" x2=\"62.704090625\" y2=\"46.757671875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.279909375\" y1=\"45.953509375\" x2=\"62.704090625\" y2=\"45.995671875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.323090625\" y1=\"45.021328125\" x2=\"62.660909375\" y2=\"45.063490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.238890625\" y1=\"48.408290625\" x2=\"62.660528125\" y2=\"48.450709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.23761875\" y1=\"47.5612\" x2=\"62.6618\" y2=\"47.60361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.259209375\" y1=\"46.693790625\" x2=\"62.640209375\" y2=\"46.736209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.23761875\" y1=\"45.95338125\" x2=\"62.6618\" y2=\"45.9958\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.2808\" y1=\"45.0212\" x2=\"62.61861875\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.216790625\" y1=\"48.428609375\" x2=\"62.597790625\" y2=\"48.471028125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.153290625\" y1=\"47.562471875\" x2=\"62.661290625\" y2=\"47.604890625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.216790625\" y1=\"46.693790625\" x2=\"62.597790625\" y2=\"46.736209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.216790625\" y1=\"45.974971875\" x2=\"62.597790625\" y2=\"46.017390625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.23838125\" y1=\"45.0212\" x2=\"62.5762\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.1745\" y1=\"48.4287375\" x2=\"62.5555\" y2=\"48.4709\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.069090625\" y1=\"47.561328125\" x2=\"62.660909375\" y2=\"47.603490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.196090625\" y1=\"46.672328125\" x2=\"62.533909375\" y2=\"46.714490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.19481875\" y1=\"45.99541875\" x2=\"62.53518125\" y2=\"46.03758125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.196090625\" y1=\"45.021328125\" x2=\"62.533909375\" y2=\"45.063490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.1538\" y1=\"48.4502\" x2=\"62.49161875\" y2=\"48.49261875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.0268\" y1=\"47.5612\" x2=\"62.61861875\" y2=\"47.60361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.1538\" y1=\"46.6722\" x2=\"62.49161875\" y2=\"46.71461875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.152528125\" y1=\"45.995290625\" x2=\"62.492890625\" y2=\"46.037709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.1538\" y1=\"45.0212\" x2=\"62.49161875\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.11138125\" y1=\"48.4502\" x2=\"62.4492\" y2=\"48.49261875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.9412\" y1=\"47.5612\" x2=\"62.61938125\" y2=\"47.60361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.11138125\" y1=\"46.6722\" x2=\"62.4492\" y2=\"46.71461875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.1317\" y1=\"46.01688125\" x2=\"62.42888125\" y2=\"46.0593\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.11138125\" y1=\"45.0212\" x2=\"62.4492\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.069090625\" y1=\"48.450328125\" x2=\"62.406909375\" y2=\"48.492490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.898909375\" y1=\"47.561328125\" x2=\"62.577090625\" y2=\"47.603490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.089409375\" y1=\"46.652009375\" x2=\"62.386590625\" y2=\"46.694171875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.089409375\" y1=\"46.017009375\" x2=\"62.386590625\" y2=\"46.059171875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.069090625\" y1=\"45.021328125\" x2=\"62.406909375\" y2=\"45.063490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.0268\" y1=\"48.4502\" x2=\"62.36461875\" y2=\"48.49261875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.85661875\" y1=\"47.5612\" x2=\"62.5348\" y2=\"47.60361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.04711875\" y1=\"46.65188125\" x2=\"62.3443\" y2=\"46.6943\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.068709375\" y1=\"46.038471875\" x2=\"62.322709375\" y2=\"46.080890625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.0268\" y1=\"45.0212\" x2=\"62.36461875\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.98438125\" y1=\"48.4502\" x2=\"62.3222\" y2=\"48.49261875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.79388125\" y1=\"47.54088125\" x2=\"62.5127\" y2=\"47.5833\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.0047\" y1=\"46.65188125\" x2=\"62.30188125\" y2=\"46.6943\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.046609375\" y1=\"46.058790625\" x2=\"62.259971875\" y2=\"46.101209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.98438125\" y1=\"45.0212\" x2=\"62.3222\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.942090625\" y1=\"48.450328125\" x2=\"62.279909375\" y2=\"48.492490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.751590625\" y1=\"47.541009375\" x2=\"62.470409375\" y2=\"47.583171875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.962409375\" y1=\"46.652009375\" x2=\"62.259590625\" y2=\"46.694171875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.00431875\" y1=\"46.05891875\" x2=\"62.21768125\" y2=\"46.10108125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.09068125\" y1=\"45.55091875\" x2=\"62.13131875\" y2=\"45.59308125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.942090625\" y1=\"45.021328125\" x2=\"62.279909375\" y2=\"45.063490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.921390625\" y1=\"48.471790625\" x2=\"62.216028125\" y2=\"48.514209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.7093\" y1=\"47.54088125\" x2=\"62.42811875\" y2=\"47.5833\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.92011875\" y1=\"46.65188125\" x2=\"62.2173\" y2=\"46.6943\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.98361875\" y1=\"46.08038125\" x2=\"62.1538\" y2=\"46.1228\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"62.048390625\" y1=\"45.550790625\" x2=\"62.089028125\" y2=\"45.593209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.8998\" y1=\"45.0212\" x2=\"62.23761875\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.878971875\" y1=\"48.471790625\" x2=\"62.173609375\" y2=\"48.514209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.66688125\" y1=\"47.54088125\" x2=\"62.3857\" y2=\"47.5833\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.8777\" y1=\"46.65188125\" x2=\"62.17488125\" y2=\"46.6943\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.962790625\" y1=\"46.101971875\" x2=\"62.089790625\" y2=\"46.144390625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.98438125\" y1=\"45.57238125\" x2=\"62.0682\" y2=\"45.6148\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.85738125\" y1=\"45.0212\" x2=\"62.1952\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.83668125\" y1=\"48.47191875\" x2=\"62.13131875\" y2=\"48.51408125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.624590625\" y1=\"47.541009375\" x2=\"62.343409375\" y2=\"47.583171875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.835409375\" y1=\"46.652009375\" x2=\"62.132590625\" y2=\"46.694171875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.9205\" y1=\"46.1021\" x2=\"62.0475\" y2=\"46.1442625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.9205\" y1=\"45.5941\" x2=\"62.0475\" y2=\"45.6362625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.815090625\" y1=\"45.021328125\" x2=\"62.152909375\" y2=\"45.063490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.7728\" y1=\"48.4502\" x2=\"62.11061875\" y2=\"48.49261875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.5823\" y1=\"47.54088125\" x2=\"62.30111875\" y2=\"47.5833\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.79311875\" y1=\"46.65188125\" x2=\"62.0903\" y2=\"46.6943\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.898528125\" y1=\"46.122290625\" x2=\"61.984890625\" y2=\"46.164709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.878209375\" y1=\"45.593971875\" x2=\"62.005209375\" y2=\"45.636390625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.7728\" y1=\"45.0212\" x2=\"62.11061875\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.73038125\" y1=\"48.4502\" x2=\"62.0682\" y2=\"48.49261875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.5602\" y1=\"47.5612\" x2=\"62.23838125\" y2=\"47.60361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.7507\" y1=\"46.65188125\" x2=\"62.04788125\" y2=\"46.6943\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.856109375\" y1=\"46.122290625\" x2=\"61.942471875\" y2=\"46.164709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.815471875\" y1=\"45.614290625\" x2=\"61.983109375\" y2=\"45.656709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.73038125\" y1=\"45.0212\" x2=\"62.0682\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.688090625\" y1=\"48.450328125\" x2=\"62.025909375\" y2=\"48.492490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.517909375\" y1=\"47.561328125\" x2=\"62.196090625\" y2=\"47.603490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.708409375\" y1=\"46.652009375\" x2=\"62.005590625\" y2=\"46.694171875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.835409375\" y1=\"46.144009375\" x2=\"61.878590625\" y2=\"46.186171875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.751590625\" y1=\"45.636009375\" x2=\"61.962409375\" y2=\"45.678171875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.688090625\" y1=\"45.021328125\" x2=\"62.025909375\" y2=\"45.063490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.6458\" y1=\"48.4502\" x2=\"61.98361875\" y2=\"48.49261875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.47561875\" y1=\"47.5612\" x2=\"62.1538\" y2=\"47.60361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.6458\" y1=\"46.6722\" x2=\"61.98361875\" y2=\"46.71461875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.7093\" y1=\"45.63588125\" x2=\"61.92011875\" y2=\"45.6783\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.6458\" y1=\"45.0212\" x2=\"61.98361875\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.60338125\" y1=\"48.4502\" x2=\"61.9412\" y2=\"48.49261875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.47638125\" y1=\"47.5612\" x2=\"62.0682\" y2=\"47.60361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.60338125\" y1=\"46.6722\" x2=\"61.9412\" y2=\"46.71461875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.645290625\" y1=\"45.657471875\" x2=\"61.899290625\" y2=\"45.699890625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.60338125\" y1=\"45.0212\" x2=\"61.9412\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.5395\" y1=\"48.4287375\" x2=\"61.9205\" y2=\"48.4709\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.434090625\" y1=\"47.561328125\" x2=\"62.025909375\" y2=\"47.603490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.561090625\" y1=\"46.672328125\" x2=\"61.898909375\" y2=\"46.714490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.58268125\" y1=\"45.67791875\" x2=\"61.87731875\" y2=\"45.72008125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.561090625\" y1=\"45.021328125\" x2=\"61.898909375\" y2=\"45.063490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.497209375\" y1=\"48.428609375\" x2=\"61.878209375\" y2=\"48.471028125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.433709375\" y1=\"47.562471875\" x2=\"61.941709375\" y2=\"47.604890625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.497209375\" y1=\"46.693790625\" x2=\"61.878209375\" y2=\"46.736209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.540390625\" y1=\"45.677790625\" x2=\"61.835028125\" y2=\"45.720209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.5188\" y1=\"45.0212\" x2=\"61.85661875\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.434471875\" y1=\"48.408290625\" x2=\"61.856109375\" y2=\"48.450709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.4332\" y1=\"47.5612\" x2=\"61.85738125\" y2=\"47.60361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.454790625\" y1=\"46.693790625\" x2=\"61.835790625\" y2=\"46.736209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.47638125\" y1=\"45.69938125\" x2=\"61.8142\" y2=\"45.7418\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.47638125\" y1=\"45.0212\" x2=\"61.8142\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.39218125\" y1=\"48.40841875\" x2=\"61.81381875\" y2=\"48.45058125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.434090625\" y1=\"47.561328125\" x2=\"61.771909375\" y2=\"47.603490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.390909375\" y1=\"46.715509375\" x2=\"61.815090625\" y2=\"46.757671875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.434090625\" y1=\"45.699509375\" x2=\"61.771909375\" y2=\"45.741671875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.434090625\" y1=\"45.021328125\" x2=\"61.771909375\" y2=\"45.063490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.3283\" y1=\"48.3867\" x2=\"61.79311875\" y2=\"48.42911875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.34861875\" y1=\"46.71538125\" x2=\"61.7728\" y2=\"46.7578\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.370209375\" y1=\"45.720971875\" x2=\"61.751209375\" y2=\"45.763390625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.3918\" y1=\"45.0212\" x2=\"61.72961875\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.264290625\" y1=\"48.365109375\" x2=\"61.772290625\" y2=\"48.407528125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.28588125\" y1=\"46.7357\" x2=\"61.7507\" y2=\"46.77811875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.307471875\" y1=\"45.741290625\" x2=\"61.729109375\" y2=\"45.783709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.34938125\" y1=\"45.0212\" x2=\"61.6872\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.20168125\" y1=\"48.34491875\" x2=\"61.75031875\" y2=\"48.38708125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.222\" y1=\"46.75741875\" x2=\"61.73\" y2=\"46.79958125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.26518125\" y1=\"45.74141875\" x2=\"61.68681875\" y2=\"45.78358125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.307090625\" y1=\"45.021328125\" x2=\"61.644909375\" y2=\"45.063490625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.1378\" y1=\"48.3232\" x2=\"61.72961875\" y2=\"48.36561875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.15811875\" y1=\"46.77888125\" x2=\"61.7093\" y2=\"46.8213\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.2013\" y1=\"45.76288125\" x2=\"61.66611875\" y2=\"45.8053\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.2648\" y1=\"45.0212\" x2=\"61.60261875\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.073790625\" y1=\"48.301609375\" x2=\"61.708790625\" y2=\"48.344028125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.073790625\" y1=\"46.820790625\" x2=\"61.708790625\" y2=\"46.863209375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.137290625\" y1=\"45.784471875\" x2=\"61.645290625\" y2=\"45.826890625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.22238125\" y1=\"45.0212\" x2=\"61.5602\" y2=\"45.06361875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.009909375\" y1=\"48.239509375\" x2=\"61.688090625\" y2=\"48.281671875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.989590625\" y1=\"46.862828125\" x2=\"61.708409375\" y2=\"46.904990625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.095\" y1=\"45.7846\" x2=\"61.603\" y2=\"45.8267625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"61.20168125\" y1=\"45.04291875\" x2=\"61.49631875\" y2=\"45.08508125\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.882528125\" y1=\"48.154290625\" x2=\"61.730890625\" y2=\"48.196709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"60.079890625\" y1=\"46.122290625\" x2=\"62.533528125\" y2=\"46.164709375\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"59.422790625\" y1=\"46.736971875\" x2=\"63.105790625\" y2=\"46.779390625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"59.422409375\" y1=\"46.735828125\" x2=\"63.021590625\" y2=\"46.777990625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"59.4233\" y1=\"46.7357\" x2=\"62.93611875\" y2=\"46.77811875\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"59.422790625\" y1=\"46.736971875\" x2=\"62.851790625\" y2=\"46.779390625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"59.422409375\" y1=\"46.735828125\" x2=\"62.767590625\" y2=\"46.777990625\" layer=\"22\" rot=\"R270\"/>\n<rectangle x1=\"59.50711875\" y1=\"46.7357\" x2=\"62.5983\" y2=\"46.77811875\" layer=\"22\" rot=\"R270\"/>\n<text x=\"2.705\" y=\"22.01\" size=\"1.016\" layer=\"25\" rot=\"R180\" align=\"center-right\">github.com/CoretechR/ESP32-Handheld</text>\n<wire x1=\"60.3875\" y1=\"13.335\" x2=\"60.3875\" y2=\"14.605\" width=\"0.4064\" layer=\"26\"/>\n<wire x1=\"61.0225\" y1=\"13.97\" x2=\"59.7525\" y2=\"13.97\" width=\"0.4064\" layer=\"26\"/>\n<wire x1=\"59.1175\" y1=\"13.97\" x2=\"57.8475\" y2=\"13.97\" width=\"0.4064\" layer=\"26\"/>\n<rectangle x1=\"4.3455\" y1=\"2.5223\" x2=\"5.0059\" y2=\"2.5731\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.0915\" y1=\"2.5731\" x2=\"5.2091\" y2=\"2.6239\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.8883\" y1=\"2.6239\" x2=\"5.4123\" y2=\"2.6747\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.7359\" y1=\"2.6747\" x2=\"5.5647\" y2=\"2.7255\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"2.7255\" x2=\"5.6663\" y2=\"2.7763\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.5327\" y1=\"2.7763\" x2=\"5.7679\" y2=\"2.8271\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.4819\" y1=\"2.8271\" x2=\"5.8695\" y2=\"2.8779\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.5327\" y1=\"2.8779\" x2=\"5.9711\" y2=\"2.9287\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.5327\" y1=\"2.9287\" x2=\"6.0727\" y2=\"2.9795\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.5835\" y1=\"2.9795\" x2=\"6.1235\" y2=\"3.0303\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.1075\" y1=\"3.0303\" x2=\"6.1743\" y2=\"3.0811\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.5835\" y1=\"3.0303\" x2=\"4.1931\" y2=\"3.0811\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.2599\" y1=\"3.0811\" x2=\"6.2251\" y2=\"3.1319\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.0811\" x2=\"4.0407\" y2=\"3.1319\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.4123\" y1=\"3.1319\" x2=\"6.3267\" y2=\"3.1827\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.1319\" x2=\"3.8883\" y2=\"3.1827\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.5647\" y1=\"3.1827\" x2=\"6.3775\" y2=\"3.2335\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6851\" y1=\"3.1827\" x2=\"3.7867\" y2=\"3.2335\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.6155\" y1=\"3.2335\" x2=\"6.4283\" y2=\"3.2843\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.7171\" y1=\"3.2843\" x2=\"6.4791\" y2=\"3.3351\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.7679\" y1=\"3.3351\" x2=\"6.5299\" y2=\"3.3859\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.8695\" y1=\"3.3859\" x2=\"6.5299\" y2=\"3.4367\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.9203\" y1=\"3.4367\" x2=\"6.5807\" y2=\"3.4875\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.9711\" y1=\"3.4875\" x2=\"6.6315\" y2=\"3.5383\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.0219\" y1=\"3.5383\" x2=\"6.6823\" y2=\"3.5891\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.0727\" y1=\"3.5891\" x2=\"6.7331\" y2=\"3.6399\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.1235\" y1=\"3.6399\" x2=\"6.7331\" y2=\"3.6907\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.1743\" y1=\"3.6907\" x2=\"6.7839\" y2=\"3.7415\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.2251\" y1=\"3.7415\" x2=\"6.6823\" y2=\"3.7923\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.7415\" x2=\"5.6663\" y2=\"3.7923\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.2759\" y1=\"3.7923\" x2=\"6.5807\" y2=\"3.8431\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.7923\" x2=\"5.6663\" y2=\"3.8431\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.2759\" y1=\"3.8431\" x2=\"6.5299\" y2=\"3.8939\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.8431\" x2=\"5.6663\" y2=\"3.8939\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.3267\" y1=\"3.8939\" x2=\"6.4283\" y2=\"3.9447\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.8939\" x2=\"5.6663\" y2=\"3.9447\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.9447\" x2=\"5.6663\" y2=\"3.9955\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.9955\" x2=\"5.6663\" y2=\"4.0463\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.0463\" x2=\"5.6663\" y2=\"4.0971\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.0971\" x2=\"5.6663\" y2=\"4.1479\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.1479\" x2=\"5.6663\" y2=\"4.1987\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.1987\" x2=\"5.6663\" y2=\"4.2495\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.2495\" x2=\"5.6663\" y2=\"4.3003\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.3003\" x2=\"4.9043\" y2=\"4.3511\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.3511\" x2=\"4.9043\" y2=\"4.4019\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.4019\" x2=\"4.9551\" y2=\"4.4527\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.4527\" x2=\"5.0567\" y2=\"4.5035\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.5035\" x2=\"5.1075\" y2=\"4.5543\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.5543\" x2=\"5.1583\" y2=\"4.6051\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.6051\" x2=\"5.2599\" y2=\"4.6559\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.2947\" y1=\"4.6559\" x2=\"5.3107\" y2=\"4.7067\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.2947\" y1=\"4.7067\" x2=\"5.3615\" y2=\"4.7575\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.3455\" y1=\"4.7575\" x2=\"5.4123\" y2=\"4.8083\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.4471\" y1=\"4.8083\" x2=\"5.4631\" y2=\"4.8591\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.4979\" y1=\"4.8591\" x2=\"5.5647\" y2=\"4.9099\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.5487\" y1=\"4.9099\" x2=\"5.6155\" y2=\"4.9607\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.5995\" y1=\"4.9607\" x2=\"5.6663\" y2=\"5.0115\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"5.0115\" x2=\"5.7679\" y2=\"5.0623\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.0623\" x2=\"7.1395\" y2=\"5.1131\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7519\" y1=\"5.0623\" x2=\"5.8187\" y2=\"5.1131\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.1131\" x2=\"7.1395\" y2=\"5.1639\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.8027\" y1=\"5.1131\" x2=\"5.8695\" y2=\"5.1639\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.1639\" x2=\"7.1395\" y2=\"5.2147\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.8535\" y1=\"5.1639\" x2=\"5.9203\" y2=\"5.2147\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.2147\" x2=\"7.1395\" y2=\"5.2655\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.9551\" y1=\"5.2147\" x2=\"5.9711\" y2=\"5.2655\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.2655\" x2=\"7.1395\" y2=\"5.3163\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.0059\" y1=\"5.2655\" x2=\"5.9711\" y2=\"5.3163\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.3163\" x2=\"7.0887\" y2=\"5.3671\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.0567\" y1=\"5.3163\" x2=\"6.0219\" y2=\"5.3671\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.3671\" x2=\"7.0887\" y2=\"5.4179\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.1075\" y1=\"5.3671\" x2=\"6.0219\" y2=\"5.4179\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.4179\" x2=\"7.0887\" y2=\"5.4687\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.0567\" y1=\"5.4179\" x2=\"6.0219\" y2=\"5.4687\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.4687\" x2=\"7.0887\" y2=\"5.5195\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.9043\" y1=\"5.4687\" x2=\"6.0219\" y2=\"5.5195\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.5195\" x2=\"7.0887\" y2=\"5.5703\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7519\" y1=\"5.5195\" x2=\"5.9711\" y2=\"5.5703\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.5703\" x2=\"7.0379\" y2=\"5.6211\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.5995\" y1=\"5.5703\" x2=\"5.9711\" y2=\"5.6211\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.5299\" y1=\"5.6211\" x2=\"7.0379\" y2=\"5.6719\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.4471\" y1=\"5.6211\" x2=\"5.9203\" y2=\"5.6719\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.5299\" y1=\"5.6719\" x2=\"7.0379\" y2=\"5.7227\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.2947\" y1=\"5.6719\" x2=\"5.8695\" y2=\"5.7227\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.7227\" x2=\"7.0379\" y2=\"5.7735\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.1423\" y1=\"5.7227\" x2=\"5.4123\" y2=\"5.7735\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.7735\" x2=\"6.9871\" y2=\"5.8243\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.0407\" y1=\"5.7735\" x2=\"5.2091\" y2=\"5.8243\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.8243\" x2=\"6.9871\" y2=\"5.8751\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.9899\" y1=\"5.8243\" x2=\"5.1075\" y2=\"5.8751\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.4283\" y1=\"5.8751\" x2=\"6.9871\" y2=\"5.9259\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"5.8751\" x2=\"4.9551\" y2=\"5.9259\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.3775\" y1=\"5.9259\" x2=\"6.9363\" y2=\"5.9767\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"5.9259\" x2=\"4.8027\" y2=\"5.9767\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.9767\" x2=\"6.9363\" y2=\"6.0275\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"5.9767\" x2=\"4.6503\" y2=\"6.0275\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"6.0275\" x2=\"6.8855\" y2=\"6.0783\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"6.0275\" x2=\"4.4979\" y2=\"6.0783\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.6823\" y1=\"6.0783\" x2=\"6.8855\" y2=\"6.1291\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.0407\" y1=\"6.0783\" x2=\"4.3455\" y2=\"6.1291\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.8723\" y1=\"6.0783\" x2=\"2.9739\" y2=\"6.1291\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"6.7331\" y1=\"6.1291\" x2=\"6.8347\" y2=\"6.1799\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.7707\" y1=\"6.1291\" x2=\"3.0247\" y2=\"6.1799\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.7199\" y1=\"6.1799\" x2=\"3.0755\" y2=\"6.2307\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.6183\" y1=\"6.2307\" x2=\"3.1263\" y2=\"6.2815\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.5675\" y1=\"6.2815\" x2=\"3.1771\" y2=\"6.3323\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.5675\" y1=\"6.3323\" x2=\"3.1771\" y2=\"6.3831\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.6183\" y1=\"6.3831\" x2=\"3.2279\" y2=\"6.4339\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.6691\" y1=\"6.4339\" x2=\"3.2787\" y2=\"6.4847\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.6691\" y1=\"6.4847\" x2=\"3.3803\" y2=\"6.5355\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.7199\" y1=\"6.5355\" x2=\"3.4311\" y2=\"6.5863\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.7707\" y1=\"6.5863\" x2=\"3.4819\" y2=\"6.6371\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.8215\" y1=\"6.6371\" x2=\"3.5327\" y2=\"6.6879\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.8723\" y1=\"6.6879\" x2=\"3.6343\" y2=\"6.7387\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.8723\" y1=\"6.7387\" x2=\"3.5835\" y2=\"6.7895\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.5139\" y1=\"6.7895\" x2=\"5.6155\" y2=\"6.8403\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"2.9739\" y1=\"6.7895\" x2=\"3.5327\" y2=\"6.8403\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.3615\" y1=\"6.8403\" x2=\"5.6663\" y2=\"6.8911\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.0247\" y1=\"6.8403\" x2=\"3.5327\" y2=\"6.8911\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.2091\" y1=\"6.8911\" x2=\"5.7171\" y2=\"6.9419\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.0755\" y1=\"6.8911\" x2=\"3.4819\" y2=\"6.9419\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"5.0059\" y1=\"6.9419\" x2=\"5.7171\" y2=\"6.9927\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.1263\" y1=\"6.9419\" x2=\"3.4819\" y2=\"6.9927\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"6.9927\" x2=\"5.7679\" y2=\"7.0435\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.1771\" y1=\"6.9927\" x2=\"3.4311\" y2=\"7.0435\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.0435\" x2=\"5.7679\" y2=\"7.0943\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.2787\" y1=\"7.0435\" x2=\"3.4311\" y2=\"7.0943\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.0943\" x2=\"5.8187\" y2=\"7.1451\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"3.3295\" y1=\"7.0943\" x2=\"3.3803\" y2=\"7.1451\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.1451\" x2=\"5.8187\" y2=\"7.1959\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.1959\" x2=\"5.7679\" y2=\"7.2467\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.2467\" x2=\"5.6663\" y2=\"7.2975\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.2975\" x2=\"5.5647\" y2=\"7.3483\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.3483\" x2=\"5.4123\" y2=\"7.3991\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.3991\" x2=\"5.2091\" y2=\"7.4499\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.4499\" x2=\"5.0059\" y2=\"7.5007\" layer=\"30\" rot=\"R180\"/>\n<rectangle x1=\"1.8438\" y1=\"23.59375\" x2=\"17.8438\" y2=\"23.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"23.65625\" x2=\"17.8438\" y2=\"23.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"23.71875\" x2=\"17.8438\" y2=\"23.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"23.78125\" x2=\"17.8438\" y2=\"23.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"23.84375\" x2=\"17.8438\" y2=\"23.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"23.90625\" x2=\"17.8438\" y2=\"23.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"23.96875\" x2=\"17.8438\" y2=\"24.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.03125\" x2=\"17.8438\" y2=\"24.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.09375\" x2=\"17.8438\" y2=\"24.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.15625\" x2=\"17.8438\" y2=\"24.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.21875\" x2=\"17.8438\" y2=\"24.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.28125\" x2=\"17.8438\" y2=\"24.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.34375\" x2=\"2.5938\" y2=\"24.40625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"24.34375\" x2=\"6.5938\" y2=\"24.40625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"24.34375\" x2=\"8.5938\" y2=\"24.40625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"24.34375\" x2=\"9.5938\" y2=\"24.40625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"24.34375\" x2=\"11.0938\" y2=\"24.40625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"24.34375\" x2=\"14.5938\" y2=\"24.40625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"24.34375\" x2=\"17.8438\" y2=\"24.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.40625\" x2=\"2.5938\" y2=\"24.46875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"24.40625\" x2=\"6.5938\" y2=\"24.46875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"24.40625\" x2=\"8.5938\" y2=\"24.46875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"24.40625\" x2=\"9.5938\" y2=\"24.46875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"24.40625\" x2=\"11.0938\" y2=\"24.46875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"24.40625\" x2=\"14.5938\" y2=\"24.46875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"24.40625\" x2=\"17.8438\" y2=\"24.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.46875\" x2=\"2.5938\" y2=\"24.53125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"24.46875\" x2=\"6.5938\" y2=\"24.53125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"24.46875\" x2=\"8.5938\" y2=\"24.53125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"24.46875\" x2=\"9.5938\" y2=\"24.53125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"24.46875\" x2=\"11.0938\" y2=\"24.53125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"24.46875\" x2=\"14.5938\" y2=\"24.53125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"24.46875\" x2=\"17.8438\" y2=\"24.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.53125\" x2=\"2.5938\" y2=\"24.59375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"24.53125\" x2=\"6.5938\" y2=\"24.59375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"24.53125\" x2=\"8.5938\" y2=\"24.59375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"24.53125\" x2=\"9.5938\" y2=\"24.59375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"24.53125\" x2=\"11.0938\" y2=\"24.59375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"24.53125\" x2=\"14.5938\" y2=\"24.59375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"24.53125\" x2=\"17.8438\" y2=\"24.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.59375\" x2=\"2.5938\" y2=\"24.65625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"24.59375\" x2=\"6.5938\" y2=\"24.65625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"24.59375\" x2=\"8.5938\" y2=\"24.65625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"24.59375\" x2=\"9.5938\" y2=\"24.65625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"24.59375\" x2=\"11.0938\" y2=\"24.65625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"24.59375\" x2=\"14.5938\" y2=\"24.65625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"24.59375\" x2=\"17.8438\" y2=\"24.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.65625\" x2=\"2.5938\" y2=\"24.71875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"24.65625\" x2=\"6.5938\" y2=\"24.71875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"24.65625\" x2=\"8.5938\" y2=\"24.71875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"24.65625\" x2=\"9.5938\" y2=\"24.71875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"24.65625\" x2=\"11.0938\" y2=\"24.71875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"24.65625\" x2=\"14.5938\" y2=\"24.71875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"24.65625\" x2=\"17.8438\" y2=\"24.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.71875\" x2=\"2.5938\" y2=\"24.78125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"24.71875\" x2=\"6.5938\" y2=\"24.78125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"24.71875\" x2=\"8.5938\" y2=\"24.78125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"24.71875\" x2=\"9.5938\" y2=\"24.78125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"24.71875\" x2=\"11.0938\" y2=\"24.78125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"24.71875\" x2=\"14.5938\" y2=\"24.78125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"24.71875\" x2=\"17.8438\" y2=\"24.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.78125\" x2=\"2.5938\" y2=\"24.84375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"24.78125\" x2=\"6.5938\" y2=\"24.84375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"24.78125\" x2=\"8.5938\" y2=\"24.84375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"24.78125\" x2=\"9.5938\" y2=\"24.84375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"24.78125\" x2=\"11.0938\" y2=\"24.84375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"24.78125\" x2=\"14.5938\" y2=\"24.84375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"24.78125\" x2=\"17.8438\" y2=\"24.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.84375\" x2=\"2.5938\" y2=\"24.90625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"24.84375\" x2=\"5.5938\" y2=\"24.90625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"24.84375\" x2=\"6.5938\" y2=\"24.90625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"24.84375\" x2=\"7.5938\" y2=\"24.90625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"24.84375\" x2=\"9.0938\" y2=\"24.90625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"24.84375\" x2=\"13.5938\" y2=\"24.90625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"24.84375\" x2=\"15.0938\" y2=\"24.90625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"24.84375\" x2=\"16.0938\" y2=\"24.90625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"24.84375\" x2=\"17.8438\" y2=\"24.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.90625\" x2=\"2.5938\" y2=\"24.96875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"24.90625\" x2=\"5.5938\" y2=\"24.96875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"24.90625\" x2=\"6.5938\" y2=\"24.96875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"24.90625\" x2=\"7.5938\" y2=\"24.96875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"24.90625\" x2=\"9.0938\" y2=\"24.96875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"24.90625\" x2=\"13.5938\" y2=\"24.96875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"24.90625\" x2=\"15.0938\" y2=\"24.96875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"24.90625\" x2=\"16.0938\" y2=\"24.96875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"24.90625\" x2=\"17.8438\" y2=\"24.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"24.96875\" x2=\"2.5938\" y2=\"25.03125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"24.96875\" x2=\"5.5938\" y2=\"25.03125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"24.96875\" x2=\"6.5938\" y2=\"25.03125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"24.96875\" x2=\"7.5938\" y2=\"25.03125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"24.96875\" x2=\"9.0938\" y2=\"25.03125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"24.96875\" x2=\"13.5938\" y2=\"25.03125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"24.96875\" x2=\"15.0938\" y2=\"25.03125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"24.96875\" x2=\"16.0938\" y2=\"25.03125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"24.96875\" x2=\"17.8438\" y2=\"25.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.03125\" x2=\"2.5938\" y2=\"25.09375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.03125\" x2=\"5.5938\" y2=\"25.09375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.03125\" x2=\"6.5938\" y2=\"25.09375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"25.03125\" x2=\"7.5938\" y2=\"25.09375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"25.03125\" x2=\"9.0938\" y2=\"25.09375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"25.03125\" x2=\"13.5938\" y2=\"25.09375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"25.03125\" x2=\"15.0938\" y2=\"25.09375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"25.03125\" x2=\"16.0938\" y2=\"25.09375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.03125\" x2=\"17.8438\" y2=\"25.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.09375\" x2=\"2.5938\" y2=\"25.15625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.09375\" x2=\"5.5938\" y2=\"25.15625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.09375\" x2=\"6.5938\" y2=\"25.15625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"25.09375\" x2=\"7.5938\" y2=\"25.15625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"25.09375\" x2=\"9.0938\" y2=\"25.15625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"25.09375\" x2=\"13.5938\" y2=\"25.15625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"25.09375\" x2=\"15.0938\" y2=\"25.15625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"25.09375\" x2=\"16.0938\" y2=\"25.15625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.09375\" x2=\"17.8438\" y2=\"25.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.15625\" x2=\"2.5938\" y2=\"25.21875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.15625\" x2=\"5.5938\" y2=\"25.21875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.15625\" x2=\"6.5938\" y2=\"25.21875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"25.15625\" x2=\"7.5938\" y2=\"25.21875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"25.15625\" x2=\"9.0938\" y2=\"25.21875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"25.15625\" x2=\"13.5938\" y2=\"25.21875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"25.15625\" x2=\"15.0938\" y2=\"25.21875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"25.15625\" x2=\"16.0938\" y2=\"25.21875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.15625\" x2=\"17.8438\" y2=\"25.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.21875\" x2=\"2.5938\" y2=\"25.28125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.21875\" x2=\"5.5938\" y2=\"25.28125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.21875\" x2=\"6.5938\" y2=\"25.28125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"25.21875\" x2=\"7.5938\" y2=\"25.28125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"25.21875\" x2=\"9.0938\" y2=\"25.28125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"25.21875\" x2=\"13.5938\" y2=\"25.28125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"25.21875\" x2=\"15.0938\" y2=\"25.28125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"25.21875\" x2=\"16.0938\" y2=\"25.28125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.21875\" x2=\"17.8438\" y2=\"25.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.28125\" x2=\"2.5938\" y2=\"25.34375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.28125\" x2=\"5.5938\" y2=\"25.34375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.28125\" x2=\"6.5938\" y2=\"25.34375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"25.28125\" x2=\"7.5938\" y2=\"25.34375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"25.28125\" x2=\"9.0938\" y2=\"25.34375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"25.28125\" x2=\"13.5938\" y2=\"25.34375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"25.28125\" x2=\"15.0938\" y2=\"25.34375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"25.28125\" x2=\"16.0938\" y2=\"25.34375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.28125\" x2=\"17.8438\" y2=\"25.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.34375\" x2=\"2.5938\" y2=\"25.40625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.34375\" x2=\"3.5938\" y2=\"25.40625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"25.34375\" x2=\"5.5938\" y2=\"25.40625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.34375\" x2=\"8.5938\" y2=\"25.40625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"25.34375\" x2=\"12.0938\" y2=\"25.40625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"25.34375\" x2=\"13.0938\" y2=\"25.40625\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"25.34375\" x2=\"15.5938\" y2=\"25.40625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.34375\" x2=\"17.8438\" y2=\"25.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.40625\" x2=\"2.5938\" y2=\"25.46875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.40625\" x2=\"3.5938\" y2=\"25.46875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"25.40625\" x2=\"5.5938\" y2=\"25.46875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.40625\" x2=\"8.5938\" y2=\"25.46875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"25.40625\" x2=\"12.0938\" y2=\"25.46875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"25.40625\" x2=\"13.0938\" y2=\"25.46875\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"25.40625\" x2=\"15.5938\" y2=\"25.46875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.40625\" x2=\"17.8438\" y2=\"25.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.46875\" x2=\"2.5938\" y2=\"25.53125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.46875\" x2=\"3.5938\" y2=\"25.53125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"25.46875\" x2=\"5.5938\" y2=\"25.53125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.46875\" x2=\"8.5938\" y2=\"25.53125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"25.46875\" x2=\"12.0938\" y2=\"25.53125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"25.46875\" x2=\"13.0938\" y2=\"25.53125\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"25.46875\" x2=\"15.5938\" y2=\"25.53125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.46875\" x2=\"17.8438\" y2=\"25.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.53125\" x2=\"2.5938\" y2=\"25.59375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.53125\" x2=\"3.5938\" y2=\"25.59375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"25.53125\" x2=\"5.5938\" y2=\"25.59375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.53125\" x2=\"8.5938\" y2=\"25.59375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"25.53125\" x2=\"12.0938\" y2=\"25.59375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"25.53125\" x2=\"13.0938\" y2=\"25.59375\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"25.53125\" x2=\"15.5938\" y2=\"25.59375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.53125\" x2=\"17.8438\" y2=\"25.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.59375\" x2=\"2.5938\" y2=\"25.65625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.59375\" x2=\"3.5938\" y2=\"25.65625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"25.59375\" x2=\"5.5938\" y2=\"25.65625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.59375\" x2=\"8.5938\" y2=\"25.65625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"25.59375\" x2=\"12.0938\" y2=\"25.65625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"25.59375\" x2=\"13.0938\" y2=\"25.65625\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"25.59375\" x2=\"15.5938\" y2=\"25.65625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.59375\" x2=\"17.8438\" y2=\"25.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.65625\" x2=\"2.5938\" y2=\"25.71875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.65625\" x2=\"3.5938\" y2=\"25.71875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"25.65625\" x2=\"5.5938\" y2=\"25.71875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.65625\" x2=\"8.5938\" y2=\"25.71875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"25.65625\" x2=\"12.0938\" y2=\"25.71875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"25.65625\" x2=\"13.0938\" y2=\"25.71875\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"25.65625\" x2=\"15.5938\" y2=\"25.71875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.65625\" x2=\"17.8438\" y2=\"25.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.71875\" x2=\"2.5938\" y2=\"25.78125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.71875\" x2=\"3.5938\" y2=\"25.78125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"25.71875\" x2=\"5.5938\" y2=\"25.78125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.71875\" x2=\"8.5938\" y2=\"25.78125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"25.71875\" x2=\"12.0938\" y2=\"25.78125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"25.71875\" x2=\"13.0938\" y2=\"25.78125\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"25.71875\" x2=\"15.5938\" y2=\"25.78125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.71875\" x2=\"17.8438\" y2=\"25.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.78125\" x2=\"2.5938\" y2=\"25.84375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.78125\" x2=\"3.5938\" y2=\"25.84375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"25.78125\" x2=\"5.5938\" y2=\"25.84375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.78125\" x2=\"8.5938\" y2=\"25.84375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"25.78125\" x2=\"12.0938\" y2=\"25.84375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"25.78125\" x2=\"13.0938\" y2=\"25.84375\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"25.78125\" x2=\"15.5938\" y2=\"25.84375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.78125\" x2=\"17.8438\" y2=\"25.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.84375\" x2=\"2.5938\" y2=\"25.90625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.84375\" x2=\"3.5938\" y2=\"25.90625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"25.84375\" x2=\"5.5938\" y2=\"25.90625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.84375\" x2=\"7.5938\" y2=\"25.90625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"25.84375\" x2=\"9.5938\" y2=\"25.90625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"25.84375\" x2=\"11.5938\" y2=\"25.90625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"25.84375\" x2=\"12.5938\" y2=\"25.90625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"25.84375\" x2=\"14.0938\" y2=\"25.90625\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"25.84375\" x2=\"16.0938\" y2=\"25.90625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.84375\" x2=\"17.8438\" y2=\"25.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.90625\" x2=\"2.5938\" y2=\"25.96875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.90625\" x2=\"3.5938\" y2=\"25.96875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"25.90625\" x2=\"5.5938\" y2=\"25.96875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.90625\" x2=\"7.5938\" y2=\"25.96875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"25.90625\" x2=\"9.5938\" y2=\"25.96875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"25.90625\" x2=\"11.5938\" y2=\"25.96875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"25.90625\" x2=\"12.5938\" y2=\"25.96875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"25.90625\" x2=\"14.0938\" y2=\"25.96875\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"25.90625\" x2=\"16.0938\" y2=\"25.96875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.90625\" x2=\"17.8438\" y2=\"25.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"25.96875\" x2=\"2.5938\" y2=\"26.03125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"25.96875\" x2=\"3.5938\" y2=\"26.03125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"25.96875\" x2=\"5.5938\" y2=\"26.03125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"25.96875\" x2=\"7.5938\" y2=\"26.03125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"25.96875\" x2=\"9.5938\" y2=\"26.03125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"25.96875\" x2=\"11.5938\" y2=\"26.03125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"25.96875\" x2=\"12.5938\" y2=\"26.03125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"25.96875\" x2=\"14.0938\" y2=\"26.03125\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"25.96875\" x2=\"16.0938\" y2=\"26.03125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"25.96875\" x2=\"17.8438\" y2=\"26.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.03125\" x2=\"2.5938\" y2=\"26.09375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.03125\" x2=\"3.5938\" y2=\"26.09375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.03125\" x2=\"5.5938\" y2=\"26.09375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.03125\" x2=\"7.5938\" y2=\"26.09375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"26.03125\" x2=\"9.5938\" y2=\"26.09375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"26.03125\" x2=\"11.5938\" y2=\"26.09375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"26.03125\" x2=\"12.5938\" y2=\"26.09375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"26.03125\" x2=\"14.0938\" y2=\"26.09375\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"26.03125\" x2=\"16.0938\" y2=\"26.09375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.03125\" x2=\"17.8438\" y2=\"26.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.09375\" x2=\"2.5938\" y2=\"26.15625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.09375\" x2=\"3.5938\" y2=\"26.15625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.09375\" x2=\"5.5938\" y2=\"26.15625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.09375\" x2=\"7.5938\" y2=\"26.15625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"26.09375\" x2=\"9.5938\" y2=\"26.15625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"26.09375\" x2=\"11.5938\" y2=\"26.15625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"26.09375\" x2=\"12.5938\" y2=\"26.15625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"26.09375\" x2=\"14.0938\" y2=\"26.15625\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"26.09375\" x2=\"16.0938\" y2=\"26.15625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.09375\" x2=\"17.8438\" y2=\"26.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.15625\" x2=\"2.5938\" y2=\"26.21875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.15625\" x2=\"3.5938\" y2=\"26.21875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.15625\" x2=\"5.5938\" y2=\"26.21875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.15625\" x2=\"7.5938\" y2=\"26.21875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"26.15625\" x2=\"9.5938\" y2=\"26.21875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"26.15625\" x2=\"11.5938\" y2=\"26.21875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"26.15625\" x2=\"12.5938\" y2=\"26.21875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"26.15625\" x2=\"14.0938\" y2=\"26.21875\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"26.15625\" x2=\"16.0938\" y2=\"26.21875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.15625\" x2=\"17.8438\" y2=\"26.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.21875\" x2=\"2.5938\" y2=\"26.28125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.21875\" x2=\"3.5938\" y2=\"26.28125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.21875\" x2=\"5.5938\" y2=\"26.28125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.21875\" x2=\"7.5938\" y2=\"26.28125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"26.21875\" x2=\"9.5938\" y2=\"26.28125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"26.21875\" x2=\"11.5938\" y2=\"26.28125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"26.21875\" x2=\"12.5938\" y2=\"26.28125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"26.21875\" x2=\"14.0938\" y2=\"26.28125\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"26.21875\" x2=\"16.0938\" y2=\"26.28125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.21875\" x2=\"17.8438\" y2=\"26.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.28125\" x2=\"2.5938\" y2=\"26.34375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.28125\" x2=\"3.5938\" y2=\"26.34375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.28125\" x2=\"5.5938\" y2=\"26.34375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.28125\" x2=\"7.5938\" y2=\"26.34375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"26.28125\" x2=\"9.5938\" y2=\"26.34375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"26.28125\" x2=\"11.5938\" y2=\"26.34375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"26.28125\" x2=\"12.5938\" y2=\"26.34375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"26.28125\" x2=\"14.0938\" y2=\"26.34375\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"26.28125\" x2=\"16.0938\" y2=\"26.34375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.28125\" x2=\"17.8438\" y2=\"26.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.34375\" x2=\"2.5938\" y2=\"26.40625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.34375\" x2=\"3.5938\" y2=\"26.40625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.34375\" x2=\"5.5938\" y2=\"26.40625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.34375\" x2=\"7.0938\" y2=\"26.40625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"26.34375\" x2=\"8.0938\" y2=\"26.40625\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"26.34375\" x2=\"10.0938\" y2=\"26.40625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"26.34375\" x2=\"11.0938\" y2=\"26.40625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"26.34375\" x2=\"16.0938\" y2=\"26.40625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.34375\" x2=\"17.8438\" y2=\"26.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.40625\" x2=\"2.5938\" y2=\"26.46875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.40625\" x2=\"3.5938\" y2=\"26.46875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.40625\" x2=\"5.5938\" y2=\"26.46875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.40625\" x2=\"7.0938\" y2=\"26.46875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"26.40625\" x2=\"8.0938\" y2=\"26.46875\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"26.40625\" x2=\"10.0938\" y2=\"26.46875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"26.40625\" x2=\"11.0938\" y2=\"26.46875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"26.40625\" x2=\"16.0938\" y2=\"26.46875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.40625\" x2=\"17.8438\" y2=\"26.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.46875\" x2=\"2.5938\" y2=\"26.53125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.46875\" x2=\"3.5938\" y2=\"26.53125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.46875\" x2=\"5.5938\" y2=\"26.53125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.46875\" x2=\"7.0938\" y2=\"26.53125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"26.46875\" x2=\"8.0938\" y2=\"26.53125\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"26.46875\" x2=\"10.0938\" y2=\"26.53125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"26.46875\" x2=\"11.0938\" y2=\"26.53125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"26.46875\" x2=\"16.0938\" y2=\"26.53125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.46875\" x2=\"17.8438\" y2=\"26.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.53125\" x2=\"2.5938\" y2=\"26.59375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.53125\" x2=\"3.5938\" y2=\"26.59375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.53125\" x2=\"5.5938\" y2=\"26.59375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.53125\" x2=\"7.0938\" y2=\"26.59375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"26.53125\" x2=\"8.0938\" y2=\"26.59375\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"26.53125\" x2=\"10.0938\" y2=\"26.59375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"26.53125\" x2=\"11.0938\" y2=\"26.59375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"26.53125\" x2=\"16.0938\" y2=\"26.59375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.53125\" x2=\"17.8438\" y2=\"26.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.59375\" x2=\"2.5938\" y2=\"26.65625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.59375\" x2=\"3.5938\" y2=\"26.65625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.59375\" x2=\"5.5938\" y2=\"26.65625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.59375\" x2=\"7.0938\" y2=\"26.65625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"26.59375\" x2=\"8.0938\" y2=\"26.65625\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"26.59375\" x2=\"10.0938\" y2=\"26.65625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"26.59375\" x2=\"11.0938\" y2=\"26.65625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"26.59375\" x2=\"16.0938\" y2=\"26.65625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.59375\" x2=\"17.8438\" y2=\"26.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.65625\" x2=\"2.5938\" y2=\"26.71875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.65625\" x2=\"3.5938\" y2=\"26.71875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.65625\" x2=\"5.5938\" y2=\"26.71875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.65625\" x2=\"7.0938\" y2=\"26.71875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"26.65625\" x2=\"8.0938\" y2=\"26.71875\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"26.65625\" x2=\"10.0938\" y2=\"26.71875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"26.65625\" x2=\"11.0938\" y2=\"26.71875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"26.65625\" x2=\"16.0938\" y2=\"26.71875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.65625\" x2=\"17.8438\" y2=\"26.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.71875\" x2=\"2.5938\" y2=\"26.78125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.71875\" x2=\"3.5938\" y2=\"26.78125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.71875\" x2=\"5.5938\" y2=\"26.78125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.71875\" x2=\"7.0938\" y2=\"26.78125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"26.71875\" x2=\"8.0938\" y2=\"26.78125\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"26.71875\" x2=\"10.0938\" y2=\"26.78125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"26.71875\" x2=\"11.0938\" y2=\"26.78125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"26.71875\" x2=\"16.0938\" y2=\"26.78125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.71875\" x2=\"17.8438\" y2=\"26.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.78125\" x2=\"2.5938\" y2=\"26.84375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.78125\" x2=\"3.5938\" y2=\"26.84375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"26.78125\" x2=\"5.5938\" y2=\"26.84375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.78125\" x2=\"7.0938\" y2=\"26.84375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"26.78125\" x2=\"8.0938\" y2=\"26.84375\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"26.78125\" x2=\"10.0938\" y2=\"26.84375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"26.78125\" x2=\"11.0938\" y2=\"26.84375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"26.78125\" x2=\"16.0938\" y2=\"26.84375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"26.78125\" x2=\"17.8438\" y2=\"26.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.84375\" x2=\"2.5938\" y2=\"26.90625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.84375\" x2=\"5.5938\" y2=\"26.90625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.84375\" x2=\"6.5938\" y2=\"26.90625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"26.84375\" x2=\"7.5938\" y2=\"26.90625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"26.84375\" x2=\"8.5938\" y2=\"26.90625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"26.84375\" x2=\"10.5938\" y2=\"26.90625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"26.84375\" x2=\"12.5938\" y2=\"26.90625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"26.84375\" x2=\"14.5938\" y2=\"26.90625\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"26.84375\" x2=\"15.5938\" y2=\"26.90625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"26.84375\" x2=\"16.5938\" y2=\"26.90625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"26.84375\" x2=\"17.8438\" y2=\"26.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.90625\" x2=\"2.5938\" y2=\"26.96875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.90625\" x2=\"5.5938\" y2=\"26.96875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.90625\" x2=\"6.5938\" y2=\"26.96875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"26.90625\" x2=\"7.5938\" y2=\"26.96875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"26.90625\" x2=\"8.5938\" y2=\"26.96875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"26.90625\" x2=\"10.5938\" y2=\"26.96875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"26.90625\" x2=\"12.5938\" y2=\"26.96875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"26.90625\" x2=\"14.5938\" y2=\"26.96875\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"26.90625\" x2=\"15.5938\" y2=\"26.96875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"26.90625\" x2=\"16.5938\" y2=\"26.96875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"26.90625\" x2=\"17.8438\" y2=\"26.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"26.96875\" x2=\"2.5938\" y2=\"27.03125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"26.96875\" x2=\"5.5938\" y2=\"27.03125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"26.96875\" x2=\"6.5938\" y2=\"27.03125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"26.96875\" x2=\"7.5938\" y2=\"27.03125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"26.96875\" x2=\"8.5938\" y2=\"27.03125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"26.96875\" x2=\"10.5938\" y2=\"27.03125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"26.96875\" x2=\"12.5938\" y2=\"27.03125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"26.96875\" x2=\"14.5938\" y2=\"27.03125\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"26.96875\" x2=\"15.5938\" y2=\"27.03125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"26.96875\" x2=\"16.5938\" y2=\"27.03125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"26.96875\" x2=\"17.8438\" y2=\"27.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.03125\" x2=\"2.5938\" y2=\"27.09375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"27.03125\" x2=\"5.5938\" y2=\"27.09375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.03125\" x2=\"6.5938\" y2=\"27.09375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.03125\" x2=\"7.5938\" y2=\"27.09375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"27.03125\" x2=\"8.5938\" y2=\"27.09375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"27.03125\" x2=\"10.5938\" y2=\"27.09375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"27.03125\" x2=\"12.5938\" y2=\"27.09375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.03125\" x2=\"14.5938\" y2=\"27.09375\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"27.03125\" x2=\"15.5938\" y2=\"27.09375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.03125\" x2=\"16.5938\" y2=\"27.09375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"27.03125\" x2=\"17.8438\" y2=\"27.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.09375\" x2=\"2.5938\" y2=\"27.15625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"27.09375\" x2=\"5.5938\" y2=\"27.15625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.09375\" x2=\"6.5938\" y2=\"27.15625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.09375\" x2=\"7.5938\" y2=\"27.15625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"27.09375\" x2=\"8.5938\" y2=\"27.15625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"27.09375\" x2=\"10.5938\" y2=\"27.15625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"27.09375\" x2=\"12.5938\" y2=\"27.15625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.09375\" x2=\"14.5938\" y2=\"27.15625\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"27.09375\" x2=\"15.5938\" y2=\"27.15625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.09375\" x2=\"16.5938\" y2=\"27.15625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"27.09375\" x2=\"17.8438\" y2=\"27.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.15625\" x2=\"2.5938\" y2=\"27.21875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"27.15625\" x2=\"5.5938\" y2=\"27.21875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.15625\" x2=\"6.5938\" y2=\"27.21875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.15625\" x2=\"7.5938\" y2=\"27.21875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"27.15625\" x2=\"8.5938\" y2=\"27.21875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"27.15625\" x2=\"10.5938\" y2=\"27.21875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"27.15625\" x2=\"12.5938\" y2=\"27.21875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.15625\" x2=\"14.5938\" y2=\"27.21875\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"27.15625\" x2=\"15.5938\" y2=\"27.21875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.15625\" x2=\"16.5938\" y2=\"27.21875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"27.15625\" x2=\"17.8438\" y2=\"27.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.21875\" x2=\"2.5938\" y2=\"27.28125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"27.21875\" x2=\"5.5938\" y2=\"27.28125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.21875\" x2=\"6.5938\" y2=\"27.28125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.21875\" x2=\"7.5938\" y2=\"27.28125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"27.21875\" x2=\"8.5938\" y2=\"27.28125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"27.21875\" x2=\"10.5938\" y2=\"27.28125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"27.21875\" x2=\"12.5938\" y2=\"27.28125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.21875\" x2=\"14.5938\" y2=\"27.28125\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"27.21875\" x2=\"15.5938\" y2=\"27.28125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.21875\" x2=\"16.5938\" y2=\"27.28125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"27.21875\" x2=\"17.8438\" y2=\"27.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.28125\" x2=\"2.5938\" y2=\"27.34375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"27.28125\" x2=\"5.5938\" y2=\"27.34375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.28125\" x2=\"6.5938\" y2=\"27.34375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.28125\" x2=\"7.5938\" y2=\"27.34375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"27.28125\" x2=\"8.5938\" y2=\"27.34375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"27.28125\" x2=\"10.5938\" y2=\"27.34375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"27.28125\" x2=\"12.5938\" y2=\"27.34375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.28125\" x2=\"14.5938\" y2=\"27.34375\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"27.28125\" x2=\"15.5938\" y2=\"27.34375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.28125\" x2=\"16.5938\" y2=\"27.34375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"27.28125\" x2=\"17.8438\" y2=\"27.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.34375\" x2=\"2.5938\" y2=\"27.40625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.34375\" x2=\"6.5938\" y2=\"27.40625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.34375\" x2=\"8.5938\" y2=\"27.40625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"27.34375\" x2=\"11.0938\" y2=\"27.40625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"27.34375\" x2=\"12.0938\" y2=\"27.40625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.34375\" x2=\"13.5938\" y2=\"27.40625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"27.34375\" x2=\"14.5938\" y2=\"27.40625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.34375\" x2=\"17.8438\" y2=\"27.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.40625\" x2=\"2.5938\" y2=\"27.46875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.40625\" x2=\"6.5938\" y2=\"27.46875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.40625\" x2=\"8.5938\" y2=\"27.46875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"27.40625\" x2=\"11.0938\" y2=\"27.46875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"27.40625\" x2=\"12.0938\" y2=\"27.46875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.40625\" x2=\"13.5938\" y2=\"27.46875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"27.40625\" x2=\"14.5938\" y2=\"27.46875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.40625\" x2=\"17.8438\" y2=\"27.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.46875\" x2=\"2.5938\" y2=\"27.53125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.46875\" x2=\"6.5938\" y2=\"27.53125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.46875\" x2=\"8.5938\" y2=\"27.53125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"27.46875\" x2=\"11.0938\" y2=\"27.53125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"27.46875\" x2=\"12.0938\" y2=\"27.53125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.46875\" x2=\"13.5938\" y2=\"27.53125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"27.46875\" x2=\"14.5938\" y2=\"27.53125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.46875\" x2=\"17.8438\" y2=\"27.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.53125\" x2=\"2.5938\" y2=\"27.59375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.53125\" x2=\"6.5938\" y2=\"27.59375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.53125\" x2=\"8.5938\" y2=\"27.59375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"27.53125\" x2=\"11.0938\" y2=\"27.59375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"27.53125\" x2=\"12.0938\" y2=\"27.59375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.53125\" x2=\"13.5938\" y2=\"27.59375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"27.53125\" x2=\"14.5938\" y2=\"27.59375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.53125\" x2=\"17.8438\" y2=\"27.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.59375\" x2=\"2.5938\" y2=\"27.65625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.59375\" x2=\"6.5938\" y2=\"27.65625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.59375\" x2=\"8.5938\" y2=\"27.65625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"27.59375\" x2=\"11.0938\" y2=\"27.65625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"27.59375\" x2=\"12.0938\" y2=\"27.65625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.59375\" x2=\"13.5938\" y2=\"27.65625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"27.59375\" x2=\"14.5938\" y2=\"27.65625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.59375\" x2=\"17.8438\" y2=\"27.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.65625\" x2=\"2.5938\" y2=\"27.71875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.65625\" x2=\"6.5938\" y2=\"27.71875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.65625\" x2=\"8.5938\" y2=\"27.71875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"27.65625\" x2=\"11.0938\" y2=\"27.71875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"27.65625\" x2=\"12.0938\" y2=\"27.71875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.65625\" x2=\"13.5938\" y2=\"27.71875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"27.65625\" x2=\"14.5938\" y2=\"27.71875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.65625\" x2=\"17.8438\" y2=\"27.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.71875\" x2=\"2.5938\" y2=\"27.78125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.71875\" x2=\"6.5938\" y2=\"27.78125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.71875\" x2=\"8.5938\" y2=\"27.78125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"27.71875\" x2=\"11.0938\" y2=\"27.78125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"27.71875\" x2=\"12.0938\" y2=\"27.78125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.71875\" x2=\"13.5938\" y2=\"27.78125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"27.71875\" x2=\"14.5938\" y2=\"27.78125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.71875\" x2=\"17.8438\" y2=\"27.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.78125\" x2=\"2.5938\" y2=\"27.84375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"27.78125\" x2=\"6.5938\" y2=\"27.84375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"27.78125\" x2=\"8.5938\" y2=\"27.84375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"27.78125\" x2=\"11.0938\" y2=\"27.84375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"27.78125\" x2=\"12.0938\" y2=\"27.84375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.78125\" x2=\"13.5938\" y2=\"27.84375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"27.78125\" x2=\"14.5938\" y2=\"27.84375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.78125\" x2=\"17.8438\" y2=\"27.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.84375\" x2=\"6.5938\" y2=\"27.90625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"27.84375\" x2=\"8.5938\" y2=\"27.90625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"27.84375\" x2=\"9.5938\" y2=\"27.90625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"27.84375\" x2=\"12.0938\" y2=\"27.90625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.84375\" x2=\"14.5938\" y2=\"27.90625\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"27.84375\" x2=\"15.5938\" y2=\"27.90625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.84375\" x2=\"16.5938\" y2=\"27.90625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"27.84375\" x2=\"17.8438\" y2=\"27.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.90625\" x2=\"6.5938\" y2=\"27.96875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"27.90625\" x2=\"8.5938\" y2=\"27.96875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"27.90625\" x2=\"9.5938\" y2=\"27.96875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"27.90625\" x2=\"12.0938\" y2=\"27.96875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.90625\" x2=\"14.5938\" y2=\"27.96875\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"27.90625\" x2=\"15.5938\" y2=\"27.96875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.90625\" x2=\"16.5938\" y2=\"27.96875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"27.90625\" x2=\"17.8438\" y2=\"27.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"27.96875\" x2=\"6.5938\" y2=\"28.03125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"27.96875\" x2=\"8.5938\" y2=\"28.03125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"27.96875\" x2=\"9.5938\" y2=\"28.03125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"27.96875\" x2=\"12.0938\" y2=\"28.03125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"27.96875\" x2=\"14.5938\" y2=\"28.03125\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"27.96875\" x2=\"15.5938\" y2=\"28.03125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"27.96875\" x2=\"16.5938\" y2=\"28.03125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"27.96875\" x2=\"17.8438\" y2=\"28.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.03125\" x2=\"6.5938\" y2=\"28.09375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.03125\" x2=\"8.5938\" y2=\"28.09375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.03125\" x2=\"9.5938\" y2=\"28.09375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"28.03125\" x2=\"12.0938\" y2=\"28.09375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"28.03125\" x2=\"14.5938\" y2=\"28.09375\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"28.03125\" x2=\"15.5938\" y2=\"28.09375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"28.03125\" x2=\"16.5938\" y2=\"28.09375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"28.03125\" x2=\"17.8438\" y2=\"28.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.09375\" x2=\"6.5938\" y2=\"28.15625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.09375\" x2=\"8.5938\" y2=\"28.15625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.09375\" x2=\"9.5938\" y2=\"28.15625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"28.09375\" x2=\"12.0938\" y2=\"28.15625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"28.09375\" x2=\"14.5938\" y2=\"28.15625\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"28.09375\" x2=\"15.5938\" y2=\"28.15625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"28.09375\" x2=\"16.5938\" y2=\"28.15625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"28.09375\" x2=\"17.8438\" y2=\"28.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.15625\" x2=\"6.5938\" y2=\"28.21875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.15625\" x2=\"8.5938\" y2=\"28.21875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.15625\" x2=\"9.5938\" y2=\"28.21875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"28.15625\" x2=\"12.0938\" y2=\"28.21875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"28.15625\" x2=\"14.5938\" y2=\"28.21875\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"28.15625\" x2=\"15.5938\" y2=\"28.21875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"28.15625\" x2=\"16.5938\" y2=\"28.21875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"28.15625\" x2=\"17.8438\" y2=\"28.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.21875\" x2=\"6.5938\" y2=\"28.28125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.21875\" x2=\"8.5938\" y2=\"28.28125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.21875\" x2=\"9.5938\" y2=\"28.28125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"28.21875\" x2=\"12.0938\" y2=\"28.28125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"28.21875\" x2=\"14.5938\" y2=\"28.28125\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"28.21875\" x2=\"15.5938\" y2=\"28.28125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"28.21875\" x2=\"16.5938\" y2=\"28.28125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"28.21875\" x2=\"17.8438\" y2=\"28.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.28125\" x2=\"6.5938\" y2=\"28.34375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.28125\" x2=\"8.5938\" y2=\"28.34375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.28125\" x2=\"9.5938\" y2=\"28.34375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"28.28125\" x2=\"12.0938\" y2=\"28.34375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"28.28125\" x2=\"14.5938\" y2=\"28.34375\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"28.28125\" x2=\"15.5938\" y2=\"28.34375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"28.28125\" x2=\"16.5938\" y2=\"28.34375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"28.28125\" x2=\"17.8438\" y2=\"28.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.34375\" x2=\"2.5938\" y2=\"28.40625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"28.34375\" x2=\"4.0938\" y2=\"28.40625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"28.34375\" x2=\"7.0938\" y2=\"28.40625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.34375\" x2=\"8.0938\" y2=\"28.40625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.34375\" x2=\"10.0938\" y2=\"28.40625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"28.34375\" x2=\"12.5938\" y2=\"28.40625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"28.34375\" x2=\"17.8438\" y2=\"28.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.40625\" x2=\"2.5938\" y2=\"28.46875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"28.40625\" x2=\"4.0938\" y2=\"28.46875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"28.40625\" x2=\"7.0938\" y2=\"28.46875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.40625\" x2=\"8.0938\" y2=\"28.46875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.40625\" x2=\"10.0938\" y2=\"28.46875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"28.40625\" x2=\"12.5938\" y2=\"28.46875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"28.40625\" x2=\"17.8438\" y2=\"28.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.46875\" x2=\"2.5938\" y2=\"28.53125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"28.46875\" x2=\"4.0938\" y2=\"28.53125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"28.46875\" x2=\"7.0938\" y2=\"28.53125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.46875\" x2=\"8.0938\" y2=\"28.53125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.46875\" x2=\"10.0938\" y2=\"28.53125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"28.46875\" x2=\"12.5938\" y2=\"28.53125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"28.46875\" x2=\"17.8438\" y2=\"28.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.53125\" x2=\"2.5938\" y2=\"28.59375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"28.53125\" x2=\"4.0938\" y2=\"28.59375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"28.53125\" x2=\"7.0938\" y2=\"28.59375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.53125\" x2=\"8.0938\" y2=\"28.59375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.53125\" x2=\"10.0938\" y2=\"28.59375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"28.53125\" x2=\"12.5938\" y2=\"28.59375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"28.53125\" x2=\"17.8438\" y2=\"28.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.59375\" x2=\"2.5938\" y2=\"28.65625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"28.59375\" x2=\"4.0938\" y2=\"28.65625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"28.59375\" x2=\"7.0938\" y2=\"28.65625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.59375\" x2=\"8.0938\" y2=\"28.65625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.59375\" x2=\"10.0938\" y2=\"28.65625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"28.59375\" x2=\"12.5938\" y2=\"28.65625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"28.59375\" x2=\"17.8438\" y2=\"28.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.65625\" x2=\"2.5938\" y2=\"28.71875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"28.65625\" x2=\"4.0938\" y2=\"28.71875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"28.65625\" x2=\"7.0938\" y2=\"28.71875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.65625\" x2=\"8.0938\" y2=\"28.71875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.65625\" x2=\"10.0938\" y2=\"28.71875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"28.65625\" x2=\"12.5938\" y2=\"28.71875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"28.65625\" x2=\"17.8438\" y2=\"28.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.71875\" x2=\"2.5938\" y2=\"28.78125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"28.71875\" x2=\"4.0938\" y2=\"28.78125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"28.71875\" x2=\"7.0938\" y2=\"28.78125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.71875\" x2=\"8.0938\" y2=\"28.78125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.71875\" x2=\"10.0938\" y2=\"28.78125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"28.71875\" x2=\"12.5938\" y2=\"28.78125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"28.71875\" x2=\"17.8438\" y2=\"28.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.78125\" x2=\"2.5938\" y2=\"28.84375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"28.78125\" x2=\"4.0938\" y2=\"28.84375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"28.78125\" x2=\"7.0938\" y2=\"28.84375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.78125\" x2=\"8.0938\" y2=\"28.84375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"28.78125\" x2=\"10.0938\" y2=\"28.84375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"28.78125\" x2=\"12.5938\" y2=\"28.84375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"28.78125\" x2=\"17.8438\" y2=\"28.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.84375\" x2=\"2.5938\" y2=\"28.90625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"28.84375\" x2=\"4.0938\" y2=\"28.90625\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"28.84375\" x2=\"6.0938\" y2=\"28.90625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.84375\" x2=\"8.0938\" y2=\"28.90625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"28.84375\" x2=\"9.0938\" y2=\"28.90625\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"28.84375\" x2=\"10.5938\" y2=\"28.90625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"28.84375\" x2=\"11.5938\" y2=\"28.90625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"28.84375\" x2=\"13.5938\" y2=\"28.90625\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"28.84375\" x2=\"16.5938\" y2=\"28.90625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"28.84375\" x2=\"17.8438\" y2=\"28.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.90625\" x2=\"2.5938\" y2=\"28.96875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"28.90625\" x2=\"4.0938\" y2=\"28.96875\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"28.90625\" x2=\"6.0938\" y2=\"28.96875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.90625\" x2=\"8.0938\" y2=\"28.96875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"28.90625\" x2=\"9.0938\" y2=\"28.96875\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"28.90625\" x2=\"10.5938\" y2=\"28.96875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"28.90625\" x2=\"11.5938\" y2=\"28.96875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"28.90625\" x2=\"13.5938\" y2=\"28.96875\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"28.90625\" x2=\"16.5938\" y2=\"28.96875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"28.90625\" x2=\"17.8438\" y2=\"28.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"28.96875\" x2=\"2.5938\" y2=\"29.03125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"28.96875\" x2=\"4.0938\" y2=\"29.03125\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"28.96875\" x2=\"6.0938\" y2=\"29.03125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"28.96875\" x2=\"8.0938\" y2=\"29.03125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"28.96875\" x2=\"9.0938\" y2=\"29.03125\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"28.96875\" x2=\"10.5938\" y2=\"29.03125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"28.96875\" x2=\"11.5938\" y2=\"29.03125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"28.96875\" x2=\"13.5938\" y2=\"29.03125\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"28.96875\" x2=\"16.5938\" y2=\"29.03125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"28.96875\" x2=\"17.8438\" y2=\"29.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.03125\" x2=\"2.5938\" y2=\"29.09375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"29.03125\" x2=\"4.0938\" y2=\"29.09375\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"29.03125\" x2=\"6.0938\" y2=\"29.09375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"29.03125\" x2=\"8.0938\" y2=\"29.09375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"29.03125\" x2=\"9.0938\" y2=\"29.09375\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"29.03125\" x2=\"10.5938\" y2=\"29.09375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"29.03125\" x2=\"11.5938\" y2=\"29.09375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.03125\" x2=\"13.5938\" y2=\"29.09375\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"29.03125\" x2=\"16.5938\" y2=\"29.09375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"29.03125\" x2=\"17.8438\" y2=\"29.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.09375\" x2=\"2.5938\" y2=\"29.15625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"29.09375\" x2=\"4.0938\" y2=\"29.15625\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"29.09375\" x2=\"6.0938\" y2=\"29.15625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"29.09375\" x2=\"8.0938\" y2=\"29.15625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"29.09375\" x2=\"9.0938\" y2=\"29.15625\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"29.09375\" x2=\"10.5938\" y2=\"29.15625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"29.09375\" x2=\"11.5938\" y2=\"29.15625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.09375\" x2=\"13.5938\" y2=\"29.15625\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"29.09375\" x2=\"16.5938\" y2=\"29.15625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"29.09375\" x2=\"17.8438\" y2=\"29.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.15625\" x2=\"2.5938\" y2=\"29.21875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"29.15625\" x2=\"4.0938\" y2=\"29.21875\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"29.15625\" x2=\"6.0938\" y2=\"29.21875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"29.15625\" x2=\"8.0938\" y2=\"29.21875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"29.15625\" x2=\"9.0938\" y2=\"29.21875\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"29.15625\" x2=\"10.5938\" y2=\"29.21875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"29.15625\" x2=\"11.5938\" y2=\"29.21875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.15625\" x2=\"13.5938\" y2=\"29.21875\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"29.15625\" x2=\"16.5938\" y2=\"29.21875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"29.15625\" x2=\"17.8438\" y2=\"29.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.21875\" x2=\"2.5938\" y2=\"29.28125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"29.21875\" x2=\"4.0938\" y2=\"29.28125\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"29.21875\" x2=\"6.0938\" y2=\"29.28125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"29.21875\" x2=\"8.0938\" y2=\"29.28125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"29.21875\" x2=\"9.0938\" y2=\"29.28125\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"29.21875\" x2=\"10.5938\" y2=\"29.28125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"29.21875\" x2=\"11.5938\" y2=\"29.28125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.21875\" x2=\"13.5938\" y2=\"29.28125\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"29.21875\" x2=\"16.5938\" y2=\"29.28125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"29.21875\" x2=\"17.8438\" y2=\"29.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.28125\" x2=\"2.5938\" y2=\"29.34375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"29.28125\" x2=\"4.0938\" y2=\"29.34375\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"29.28125\" x2=\"6.0938\" y2=\"29.34375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"29.28125\" x2=\"8.0938\" y2=\"29.34375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"29.28125\" x2=\"9.0938\" y2=\"29.34375\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"29.28125\" x2=\"10.5938\" y2=\"29.34375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"29.28125\" x2=\"11.5938\" y2=\"29.34375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.28125\" x2=\"13.5938\" y2=\"29.34375\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"29.28125\" x2=\"16.5938\" y2=\"29.34375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"29.28125\" x2=\"17.8438\" y2=\"29.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.34375\" x2=\"2.5938\" y2=\"29.40625\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"29.34375\" x2=\"4.5938\" y2=\"29.40625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"29.34375\" x2=\"5.5938\" y2=\"29.40625\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"29.34375\" x2=\"7.0938\" y2=\"29.40625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"29.34375\" x2=\"8.5938\" y2=\"29.40625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"29.34375\" x2=\"10.0938\" y2=\"29.40625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"29.34375\" x2=\"12.5938\" y2=\"29.40625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.34375\" x2=\"13.5938\" y2=\"29.40625\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"29.34375\" x2=\"16.0938\" y2=\"29.40625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"29.34375\" x2=\"17.8438\" y2=\"29.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.40625\" x2=\"2.5938\" y2=\"29.46875\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"29.40625\" x2=\"4.5938\" y2=\"29.46875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"29.40625\" x2=\"5.5938\" y2=\"29.46875\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"29.40625\" x2=\"7.0938\" y2=\"29.46875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"29.40625\" x2=\"8.5938\" y2=\"29.46875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"29.40625\" x2=\"10.0938\" y2=\"29.46875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"29.40625\" x2=\"12.5938\" y2=\"29.46875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.40625\" x2=\"13.5938\" y2=\"29.46875\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"29.40625\" x2=\"16.0938\" y2=\"29.46875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"29.40625\" x2=\"17.8438\" y2=\"29.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.46875\" x2=\"2.5938\" y2=\"29.53125\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"29.46875\" x2=\"4.5938\" y2=\"29.53125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"29.46875\" x2=\"5.5938\" y2=\"29.53125\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"29.46875\" x2=\"7.0938\" y2=\"29.53125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"29.46875\" x2=\"8.5938\" y2=\"29.53125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"29.46875\" x2=\"10.0938\" y2=\"29.53125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"29.46875\" x2=\"12.5938\" y2=\"29.53125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.46875\" x2=\"13.5938\" y2=\"29.53125\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"29.46875\" x2=\"16.0938\" y2=\"29.53125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"29.46875\" x2=\"17.8438\" y2=\"29.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.53125\" x2=\"2.5938\" y2=\"29.59375\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"29.53125\" x2=\"4.5938\" y2=\"29.59375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"29.53125\" x2=\"5.5938\" y2=\"29.59375\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"29.53125\" x2=\"7.0938\" y2=\"29.59375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"29.53125\" x2=\"8.5938\" y2=\"29.59375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"29.53125\" x2=\"10.0938\" y2=\"29.59375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"29.53125\" x2=\"12.5938\" y2=\"29.59375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.53125\" x2=\"13.5938\" y2=\"29.59375\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"29.53125\" x2=\"16.0938\" y2=\"29.59375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"29.53125\" x2=\"17.8438\" y2=\"29.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.59375\" x2=\"2.5938\" y2=\"29.65625\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"29.59375\" x2=\"4.5938\" y2=\"29.65625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"29.59375\" x2=\"5.5938\" y2=\"29.65625\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"29.59375\" x2=\"7.0938\" y2=\"29.65625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"29.59375\" x2=\"8.5938\" y2=\"29.65625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"29.59375\" x2=\"10.0938\" y2=\"29.65625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"29.59375\" x2=\"12.5938\" y2=\"29.65625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.59375\" x2=\"13.5938\" y2=\"29.65625\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"29.59375\" x2=\"16.0938\" y2=\"29.65625\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"29.59375\" x2=\"17.8438\" y2=\"29.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.65625\" x2=\"2.5938\" y2=\"29.71875\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"29.65625\" x2=\"4.5938\" y2=\"29.71875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"29.65625\" x2=\"5.5938\" y2=\"29.71875\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"29.65625\" x2=\"7.0938\" y2=\"29.71875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"29.65625\" x2=\"8.5938\" y2=\"29.71875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"29.65625\" x2=\"10.0938\" y2=\"29.71875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"29.65625\" x2=\"12.5938\" y2=\"29.71875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.65625\" x2=\"13.5938\" y2=\"29.71875\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"29.65625\" x2=\"16.0938\" y2=\"29.71875\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"29.65625\" x2=\"17.8438\" y2=\"29.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.71875\" x2=\"2.5938\" y2=\"29.78125\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"29.71875\" x2=\"4.5938\" y2=\"29.78125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"29.71875\" x2=\"5.5938\" y2=\"29.78125\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"29.71875\" x2=\"7.0938\" y2=\"29.78125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"29.71875\" x2=\"8.5938\" y2=\"29.78125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"29.71875\" x2=\"10.0938\" y2=\"29.78125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"29.71875\" x2=\"12.5938\" y2=\"29.78125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.71875\" x2=\"13.5938\" y2=\"29.78125\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"29.71875\" x2=\"16.0938\" y2=\"29.78125\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"29.71875\" x2=\"17.8438\" y2=\"29.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.78125\" x2=\"2.5938\" y2=\"29.84375\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"29.78125\" x2=\"4.5938\" y2=\"29.84375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"29.78125\" x2=\"5.5938\" y2=\"29.84375\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"29.78125\" x2=\"7.0938\" y2=\"29.84375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"29.78125\" x2=\"8.5938\" y2=\"29.84375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"29.78125\" x2=\"10.0938\" y2=\"29.84375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"29.78125\" x2=\"12.5938\" y2=\"29.84375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"29.78125\" x2=\"13.5938\" y2=\"29.84375\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"29.78125\" x2=\"16.0938\" y2=\"29.84375\" layer=\"25\"/>\n<rectangle x1=\"16.5938\" y1=\"29.78125\" x2=\"17.8438\" y2=\"29.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.84375\" x2=\"2.5938\" y2=\"29.90625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"29.84375\" x2=\"4.0938\" y2=\"29.90625\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"29.84375\" x2=\"5.0938\" y2=\"29.90625\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"29.84375\" x2=\"6.0938\" y2=\"29.90625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"29.84375\" x2=\"10.0938\" y2=\"29.90625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"29.84375\" x2=\"12.0938\" y2=\"29.90625\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"29.84375\" x2=\"14.0938\" y2=\"29.90625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"29.84375\" x2=\"16.0938\" y2=\"29.90625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"29.84375\" x2=\"17.8438\" y2=\"29.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.90625\" x2=\"2.5938\" y2=\"29.96875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"29.90625\" x2=\"4.0938\" y2=\"29.96875\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"29.90625\" x2=\"5.0938\" y2=\"29.96875\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"29.90625\" x2=\"6.0938\" y2=\"29.96875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"29.90625\" x2=\"10.0938\" y2=\"29.96875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"29.90625\" x2=\"12.0938\" y2=\"29.96875\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"29.90625\" x2=\"14.0938\" y2=\"29.96875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"29.90625\" x2=\"16.0938\" y2=\"29.96875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"29.90625\" x2=\"17.8438\" y2=\"29.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"29.96875\" x2=\"2.5938\" y2=\"30.03125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"29.96875\" x2=\"4.0938\" y2=\"30.03125\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"29.96875\" x2=\"5.0938\" y2=\"30.03125\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"29.96875\" x2=\"6.0938\" y2=\"30.03125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"29.96875\" x2=\"10.0938\" y2=\"30.03125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"29.96875\" x2=\"12.0938\" y2=\"30.03125\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"29.96875\" x2=\"14.0938\" y2=\"30.03125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"29.96875\" x2=\"16.0938\" y2=\"30.03125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"29.96875\" x2=\"17.8438\" y2=\"30.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.03125\" x2=\"2.5938\" y2=\"30.09375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.03125\" x2=\"4.0938\" y2=\"30.09375\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"30.03125\" x2=\"5.0938\" y2=\"30.09375\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"30.03125\" x2=\"6.0938\" y2=\"30.09375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.03125\" x2=\"10.0938\" y2=\"30.09375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"30.03125\" x2=\"12.0938\" y2=\"30.09375\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"30.03125\" x2=\"14.0938\" y2=\"30.09375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"30.03125\" x2=\"16.0938\" y2=\"30.09375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"30.03125\" x2=\"17.8438\" y2=\"30.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.09375\" x2=\"2.5938\" y2=\"30.15625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.09375\" x2=\"4.0938\" y2=\"30.15625\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"30.09375\" x2=\"5.0938\" y2=\"30.15625\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"30.09375\" x2=\"6.0938\" y2=\"30.15625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.09375\" x2=\"10.0938\" y2=\"30.15625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"30.09375\" x2=\"12.0938\" y2=\"30.15625\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"30.09375\" x2=\"14.0938\" y2=\"30.15625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"30.09375\" x2=\"16.0938\" y2=\"30.15625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"30.09375\" x2=\"17.8438\" y2=\"30.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.15625\" x2=\"2.5938\" y2=\"30.21875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.15625\" x2=\"4.0938\" y2=\"30.21875\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"30.15625\" x2=\"5.0938\" y2=\"30.21875\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"30.15625\" x2=\"6.0938\" y2=\"30.21875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.15625\" x2=\"10.0938\" y2=\"30.21875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"30.15625\" x2=\"12.0938\" y2=\"30.21875\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"30.15625\" x2=\"14.0938\" y2=\"30.21875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"30.15625\" x2=\"16.0938\" y2=\"30.21875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"30.15625\" x2=\"17.8438\" y2=\"30.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.21875\" x2=\"2.5938\" y2=\"30.28125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.21875\" x2=\"4.0938\" y2=\"30.28125\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"30.21875\" x2=\"5.0938\" y2=\"30.28125\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"30.21875\" x2=\"6.0938\" y2=\"30.28125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.21875\" x2=\"10.0938\" y2=\"30.28125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"30.21875\" x2=\"12.0938\" y2=\"30.28125\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"30.21875\" x2=\"14.0938\" y2=\"30.28125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"30.21875\" x2=\"16.0938\" y2=\"30.28125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"30.21875\" x2=\"17.8438\" y2=\"30.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.28125\" x2=\"2.5938\" y2=\"30.34375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.28125\" x2=\"4.0938\" y2=\"30.34375\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"30.28125\" x2=\"5.0938\" y2=\"30.34375\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"30.28125\" x2=\"6.0938\" y2=\"30.34375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.28125\" x2=\"10.0938\" y2=\"30.34375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"30.28125\" x2=\"12.0938\" y2=\"30.34375\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"30.28125\" x2=\"14.0938\" y2=\"30.34375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"30.28125\" x2=\"16.0938\" y2=\"30.34375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"30.28125\" x2=\"17.8438\" y2=\"30.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.34375\" x2=\"2.5938\" y2=\"30.40625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.34375\" x2=\"4.5938\" y2=\"30.40625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"30.34375\" x2=\"5.5938\" y2=\"30.40625\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"30.34375\" x2=\"7.5938\" y2=\"30.40625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.34375\" x2=\"8.5938\" y2=\"30.40625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"30.34375\" x2=\"9.5938\" y2=\"30.40625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"30.34375\" x2=\"12.5938\" y2=\"30.40625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"30.34375\" x2=\"14.0938\" y2=\"30.40625\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"30.34375\" x2=\"17.8438\" y2=\"30.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.40625\" x2=\"2.5938\" y2=\"30.46875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.40625\" x2=\"4.5938\" y2=\"30.46875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"30.40625\" x2=\"5.5938\" y2=\"30.46875\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"30.40625\" x2=\"7.5938\" y2=\"30.46875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.40625\" x2=\"8.5938\" y2=\"30.46875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"30.40625\" x2=\"9.5938\" y2=\"30.46875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"30.40625\" x2=\"12.5938\" y2=\"30.46875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"30.40625\" x2=\"14.0938\" y2=\"30.46875\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"30.40625\" x2=\"17.8438\" y2=\"30.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.46875\" x2=\"2.5938\" y2=\"30.53125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.46875\" x2=\"4.5938\" y2=\"30.53125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"30.46875\" x2=\"5.5938\" y2=\"30.53125\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"30.46875\" x2=\"7.5938\" y2=\"30.53125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.46875\" x2=\"8.5938\" y2=\"30.53125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"30.46875\" x2=\"9.5938\" y2=\"30.53125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"30.46875\" x2=\"12.5938\" y2=\"30.53125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"30.46875\" x2=\"14.0938\" y2=\"30.53125\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"30.46875\" x2=\"17.8438\" y2=\"30.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.53125\" x2=\"2.5938\" y2=\"30.59375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.53125\" x2=\"4.5938\" y2=\"30.59375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"30.53125\" x2=\"5.5938\" y2=\"30.59375\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"30.53125\" x2=\"7.5938\" y2=\"30.59375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.53125\" x2=\"8.5938\" y2=\"30.59375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"30.53125\" x2=\"9.5938\" y2=\"30.59375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"30.53125\" x2=\"12.5938\" y2=\"30.59375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"30.53125\" x2=\"14.0938\" y2=\"30.59375\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"30.53125\" x2=\"17.8438\" y2=\"30.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.59375\" x2=\"2.5938\" y2=\"30.65625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.59375\" x2=\"4.5938\" y2=\"30.65625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"30.59375\" x2=\"5.5938\" y2=\"30.65625\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"30.59375\" x2=\"7.5938\" y2=\"30.65625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.59375\" x2=\"8.5938\" y2=\"30.65625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"30.59375\" x2=\"9.5938\" y2=\"30.65625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"30.59375\" x2=\"12.5938\" y2=\"30.65625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"30.59375\" x2=\"14.0938\" y2=\"30.65625\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"30.59375\" x2=\"17.8438\" y2=\"30.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.65625\" x2=\"2.5938\" y2=\"30.71875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.65625\" x2=\"4.5938\" y2=\"30.71875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"30.65625\" x2=\"5.5938\" y2=\"30.71875\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"30.65625\" x2=\"7.5938\" y2=\"30.71875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.65625\" x2=\"8.5938\" y2=\"30.71875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"30.65625\" x2=\"9.5938\" y2=\"30.71875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"30.65625\" x2=\"12.5938\" y2=\"30.71875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"30.65625\" x2=\"14.0938\" y2=\"30.71875\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"30.65625\" x2=\"17.8438\" y2=\"30.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.71875\" x2=\"2.5938\" y2=\"30.78125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.71875\" x2=\"4.5938\" y2=\"30.78125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"30.71875\" x2=\"5.5938\" y2=\"30.78125\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"30.71875\" x2=\"7.5938\" y2=\"30.78125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.71875\" x2=\"8.5938\" y2=\"30.78125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"30.71875\" x2=\"9.5938\" y2=\"30.78125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"30.71875\" x2=\"12.5938\" y2=\"30.78125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"30.71875\" x2=\"14.0938\" y2=\"30.78125\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"30.71875\" x2=\"17.8438\" y2=\"30.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.78125\" x2=\"2.5938\" y2=\"30.84375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"30.78125\" x2=\"4.5938\" y2=\"30.84375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"30.78125\" x2=\"5.5938\" y2=\"30.84375\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"30.78125\" x2=\"7.5938\" y2=\"30.84375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"30.78125\" x2=\"8.5938\" y2=\"30.84375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"30.78125\" x2=\"9.5938\" y2=\"30.84375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"30.78125\" x2=\"12.5938\" y2=\"30.84375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"30.78125\" x2=\"14.0938\" y2=\"30.84375\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"30.78125\" x2=\"17.8438\" y2=\"30.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.84375\" x2=\"4.0938\" y2=\"30.90625\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"30.84375\" x2=\"5.0938\" y2=\"30.90625\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"30.84375\" x2=\"7.0938\" y2=\"30.90625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"30.84375\" x2=\"8.5938\" y2=\"30.90625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"30.84375\" x2=\"9.5938\" y2=\"30.90625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"30.84375\" x2=\"11.5938\" y2=\"30.90625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"30.84375\" x2=\"13.0938\" y2=\"30.90625\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"30.84375\" x2=\"14.0938\" y2=\"30.90625\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"30.84375\" x2=\"15.5938\" y2=\"30.90625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"30.84375\" x2=\"17.8438\" y2=\"30.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.90625\" x2=\"4.0938\" y2=\"30.96875\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"30.90625\" x2=\"5.0938\" y2=\"30.96875\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"30.90625\" x2=\"7.0938\" y2=\"30.96875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"30.90625\" x2=\"8.5938\" y2=\"30.96875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"30.90625\" x2=\"9.5938\" y2=\"30.96875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"30.90625\" x2=\"11.5938\" y2=\"30.96875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"30.90625\" x2=\"13.0938\" y2=\"30.96875\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"30.90625\" x2=\"14.0938\" y2=\"30.96875\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"30.90625\" x2=\"15.5938\" y2=\"30.96875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"30.90625\" x2=\"17.8438\" y2=\"30.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"30.96875\" x2=\"4.0938\" y2=\"31.03125\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"30.96875\" x2=\"5.0938\" y2=\"31.03125\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"30.96875\" x2=\"7.0938\" y2=\"31.03125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"30.96875\" x2=\"8.5938\" y2=\"31.03125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"30.96875\" x2=\"9.5938\" y2=\"31.03125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"30.96875\" x2=\"11.5938\" y2=\"31.03125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"30.96875\" x2=\"13.0938\" y2=\"31.03125\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"30.96875\" x2=\"14.0938\" y2=\"31.03125\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"30.96875\" x2=\"15.5938\" y2=\"31.03125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"30.96875\" x2=\"17.8438\" y2=\"31.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.03125\" x2=\"4.0938\" y2=\"31.09375\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"31.03125\" x2=\"5.0938\" y2=\"31.09375\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"31.03125\" x2=\"7.0938\" y2=\"31.09375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.03125\" x2=\"8.5938\" y2=\"31.09375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"31.03125\" x2=\"9.5938\" y2=\"31.09375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"31.03125\" x2=\"11.5938\" y2=\"31.09375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.03125\" x2=\"13.0938\" y2=\"31.09375\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"31.03125\" x2=\"14.0938\" y2=\"31.09375\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"31.03125\" x2=\"15.5938\" y2=\"31.09375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"31.03125\" x2=\"17.8438\" y2=\"31.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.09375\" x2=\"4.0938\" y2=\"31.15625\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"31.09375\" x2=\"5.0938\" y2=\"31.15625\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"31.09375\" x2=\"7.0938\" y2=\"31.15625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.09375\" x2=\"8.5938\" y2=\"31.15625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"31.09375\" x2=\"9.5938\" y2=\"31.15625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"31.09375\" x2=\"11.5938\" y2=\"31.15625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.09375\" x2=\"13.0938\" y2=\"31.15625\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"31.09375\" x2=\"14.0938\" y2=\"31.15625\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"31.09375\" x2=\"15.5938\" y2=\"31.15625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"31.09375\" x2=\"17.8438\" y2=\"31.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.15625\" x2=\"4.0938\" y2=\"31.21875\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"31.15625\" x2=\"5.0938\" y2=\"31.21875\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"31.15625\" x2=\"7.0938\" y2=\"31.21875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.15625\" x2=\"8.5938\" y2=\"31.21875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"31.15625\" x2=\"9.5938\" y2=\"31.21875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"31.15625\" x2=\"11.5938\" y2=\"31.21875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.15625\" x2=\"13.0938\" y2=\"31.21875\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"31.15625\" x2=\"14.0938\" y2=\"31.21875\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"31.15625\" x2=\"15.5938\" y2=\"31.21875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"31.15625\" x2=\"17.8438\" y2=\"31.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.21875\" x2=\"4.0938\" y2=\"31.28125\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"31.21875\" x2=\"5.0938\" y2=\"31.28125\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"31.21875\" x2=\"7.0938\" y2=\"31.28125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.21875\" x2=\"8.5938\" y2=\"31.28125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"31.21875\" x2=\"9.5938\" y2=\"31.28125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"31.21875\" x2=\"11.5938\" y2=\"31.28125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.21875\" x2=\"13.0938\" y2=\"31.28125\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"31.21875\" x2=\"14.0938\" y2=\"31.28125\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"31.21875\" x2=\"15.5938\" y2=\"31.28125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"31.21875\" x2=\"17.8438\" y2=\"31.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.28125\" x2=\"4.0938\" y2=\"31.34375\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"31.28125\" x2=\"5.0938\" y2=\"31.34375\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"31.28125\" x2=\"7.0938\" y2=\"31.34375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.28125\" x2=\"8.5938\" y2=\"31.34375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"31.28125\" x2=\"9.5938\" y2=\"31.34375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"31.28125\" x2=\"11.5938\" y2=\"31.34375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.28125\" x2=\"13.0938\" y2=\"31.34375\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"31.28125\" x2=\"14.0938\" y2=\"31.34375\" layer=\"25\"/>\n<rectangle x1=\"15.0938\" y1=\"31.28125\" x2=\"15.5938\" y2=\"31.34375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"31.28125\" x2=\"17.8438\" y2=\"31.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.34375\" x2=\"3.0938\" y2=\"31.40625\" layer=\"25\"/>\n<rectangle x1=\"4.0938\" y1=\"31.34375\" x2=\"4.5938\" y2=\"31.40625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"31.34375\" x2=\"5.5938\" y2=\"31.40625\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"31.34375\" x2=\"7.0938\" y2=\"31.40625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.34375\" x2=\"9.0938\" y2=\"31.40625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"31.34375\" x2=\"12.0938\" y2=\"31.40625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.34375\" x2=\"15.0938\" y2=\"31.40625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"31.34375\" x2=\"17.8438\" y2=\"31.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.40625\" x2=\"3.0938\" y2=\"31.46875\" layer=\"25\"/>\n<rectangle x1=\"4.0938\" y1=\"31.40625\" x2=\"4.5938\" y2=\"31.46875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"31.40625\" x2=\"5.5938\" y2=\"31.46875\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"31.40625\" x2=\"7.0938\" y2=\"31.46875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.40625\" x2=\"9.0938\" y2=\"31.46875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"31.40625\" x2=\"12.0938\" y2=\"31.46875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.40625\" x2=\"15.0938\" y2=\"31.46875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"31.40625\" x2=\"17.8438\" y2=\"31.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.46875\" x2=\"3.0938\" y2=\"31.53125\" layer=\"25\"/>\n<rectangle x1=\"4.0938\" y1=\"31.46875\" x2=\"4.5938\" y2=\"31.53125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"31.46875\" x2=\"5.5938\" y2=\"31.53125\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"31.46875\" x2=\"7.0938\" y2=\"31.53125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.46875\" x2=\"9.0938\" y2=\"31.53125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"31.46875\" x2=\"12.0938\" y2=\"31.53125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.46875\" x2=\"15.0938\" y2=\"31.53125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"31.46875\" x2=\"17.8438\" y2=\"31.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.53125\" x2=\"3.0938\" y2=\"31.59375\" layer=\"25\"/>\n<rectangle x1=\"4.0938\" y1=\"31.53125\" x2=\"4.5938\" y2=\"31.59375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"31.53125\" x2=\"5.5938\" y2=\"31.59375\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"31.53125\" x2=\"7.0938\" y2=\"31.59375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.53125\" x2=\"9.0938\" y2=\"31.59375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"31.53125\" x2=\"12.0938\" y2=\"31.59375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.53125\" x2=\"15.0938\" y2=\"31.59375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"31.53125\" x2=\"17.8438\" y2=\"31.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.59375\" x2=\"3.0938\" y2=\"31.65625\" layer=\"25\"/>\n<rectangle x1=\"4.0938\" y1=\"31.59375\" x2=\"4.5938\" y2=\"31.65625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"31.59375\" x2=\"5.5938\" y2=\"31.65625\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"31.59375\" x2=\"7.0938\" y2=\"31.65625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.59375\" x2=\"9.0938\" y2=\"31.65625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"31.59375\" x2=\"12.0938\" y2=\"31.65625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.59375\" x2=\"15.0938\" y2=\"31.65625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"31.59375\" x2=\"17.8438\" y2=\"31.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.65625\" x2=\"3.0938\" y2=\"31.71875\" layer=\"25\"/>\n<rectangle x1=\"4.0938\" y1=\"31.65625\" x2=\"4.5938\" y2=\"31.71875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"31.65625\" x2=\"5.5938\" y2=\"31.71875\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"31.65625\" x2=\"7.0938\" y2=\"31.71875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.65625\" x2=\"9.0938\" y2=\"31.71875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"31.65625\" x2=\"12.0938\" y2=\"31.71875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.65625\" x2=\"15.0938\" y2=\"31.71875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"31.65625\" x2=\"17.8438\" y2=\"31.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.71875\" x2=\"3.0938\" y2=\"31.78125\" layer=\"25\"/>\n<rectangle x1=\"4.0938\" y1=\"31.71875\" x2=\"4.5938\" y2=\"31.78125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"31.71875\" x2=\"5.5938\" y2=\"31.78125\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"31.71875\" x2=\"7.0938\" y2=\"31.78125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.71875\" x2=\"9.0938\" y2=\"31.78125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"31.71875\" x2=\"12.0938\" y2=\"31.78125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.71875\" x2=\"15.0938\" y2=\"31.78125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"31.71875\" x2=\"17.8438\" y2=\"31.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.78125\" x2=\"3.0938\" y2=\"31.84375\" layer=\"25\"/>\n<rectangle x1=\"4.0938\" y1=\"31.78125\" x2=\"4.5938\" y2=\"31.84375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"31.78125\" x2=\"5.5938\" y2=\"31.84375\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"31.78125\" x2=\"7.0938\" y2=\"31.84375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"31.78125\" x2=\"9.0938\" y2=\"31.84375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"31.78125\" x2=\"12.0938\" y2=\"31.84375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"31.78125\" x2=\"15.0938\" y2=\"31.84375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"31.78125\" x2=\"17.8438\" y2=\"31.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.84375\" x2=\"2.5938\" y2=\"31.90625\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"31.84375\" x2=\"5.0938\" y2=\"31.90625\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"31.84375\" x2=\"6.0938\" y2=\"31.90625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"31.84375\" x2=\"7.5938\" y2=\"31.90625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"31.84375\" x2=\"8.5938\" y2=\"31.90625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"31.84375\" x2=\"11.5938\" y2=\"31.90625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"31.84375\" x2=\"12.5938\" y2=\"31.90625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"31.84375\" x2=\"15.0938\" y2=\"31.90625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"31.84375\" x2=\"17.8438\" y2=\"31.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.90625\" x2=\"2.5938\" y2=\"31.96875\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"31.90625\" x2=\"5.0938\" y2=\"31.96875\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"31.90625\" x2=\"6.0938\" y2=\"31.96875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"31.90625\" x2=\"7.5938\" y2=\"31.96875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"31.90625\" x2=\"8.5938\" y2=\"31.96875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"31.90625\" x2=\"11.5938\" y2=\"31.96875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"31.90625\" x2=\"12.5938\" y2=\"31.96875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"31.90625\" x2=\"15.0938\" y2=\"31.96875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"31.90625\" x2=\"17.8438\" y2=\"31.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"31.96875\" x2=\"2.5938\" y2=\"32.03125\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"31.96875\" x2=\"5.0938\" y2=\"32.03125\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"31.96875\" x2=\"6.0938\" y2=\"32.03125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"31.96875\" x2=\"7.5938\" y2=\"32.03125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"31.96875\" x2=\"8.5938\" y2=\"32.03125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"31.96875\" x2=\"11.5938\" y2=\"32.03125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"31.96875\" x2=\"12.5938\" y2=\"32.03125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"31.96875\" x2=\"15.0938\" y2=\"32.03125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"31.96875\" x2=\"17.8438\" y2=\"32.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.03125\" x2=\"2.5938\" y2=\"32.09375\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"32.03125\" x2=\"5.0938\" y2=\"32.09375\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"32.03125\" x2=\"6.0938\" y2=\"32.09375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"32.03125\" x2=\"7.5938\" y2=\"32.09375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.03125\" x2=\"8.5938\" y2=\"32.09375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"32.03125\" x2=\"11.5938\" y2=\"32.09375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"32.03125\" x2=\"12.5938\" y2=\"32.09375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"32.03125\" x2=\"15.0938\" y2=\"32.09375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"32.03125\" x2=\"17.8438\" y2=\"32.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.09375\" x2=\"2.5938\" y2=\"32.15625\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"32.09375\" x2=\"5.0938\" y2=\"32.15625\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"32.09375\" x2=\"6.0938\" y2=\"32.15625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"32.09375\" x2=\"7.5938\" y2=\"32.15625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.09375\" x2=\"8.5938\" y2=\"32.15625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"32.09375\" x2=\"11.5938\" y2=\"32.15625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"32.09375\" x2=\"12.5938\" y2=\"32.15625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"32.09375\" x2=\"15.0938\" y2=\"32.15625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"32.09375\" x2=\"17.8438\" y2=\"32.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.15625\" x2=\"2.5938\" y2=\"32.21875\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"32.15625\" x2=\"5.0938\" y2=\"32.21875\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"32.15625\" x2=\"6.0938\" y2=\"32.21875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"32.15625\" x2=\"7.5938\" y2=\"32.21875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.15625\" x2=\"8.5938\" y2=\"32.21875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"32.15625\" x2=\"11.5938\" y2=\"32.21875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"32.15625\" x2=\"12.5938\" y2=\"32.21875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"32.15625\" x2=\"15.0938\" y2=\"32.21875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"32.15625\" x2=\"17.8438\" y2=\"32.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.21875\" x2=\"2.5938\" y2=\"32.28125\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"32.21875\" x2=\"5.0938\" y2=\"32.28125\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"32.21875\" x2=\"6.0938\" y2=\"32.28125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"32.21875\" x2=\"7.5938\" y2=\"32.28125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.21875\" x2=\"8.5938\" y2=\"32.28125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"32.21875\" x2=\"11.5938\" y2=\"32.28125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"32.21875\" x2=\"12.5938\" y2=\"32.28125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"32.21875\" x2=\"15.0938\" y2=\"32.28125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"32.21875\" x2=\"17.8438\" y2=\"32.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.28125\" x2=\"2.5938\" y2=\"32.34375\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"32.28125\" x2=\"5.0938\" y2=\"32.34375\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"32.28125\" x2=\"6.0938\" y2=\"32.34375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"32.28125\" x2=\"7.5938\" y2=\"32.34375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.28125\" x2=\"8.5938\" y2=\"32.34375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"32.28125\" x2=\"11.5938\" y2=\"32.34375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"32.28125\" x2=\"12.5938\" y2=\"32.34375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"32.28125\" x2=\"15.0938\" y2=\"32.34375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"32.28125\" x2=\"17.8438\" y2=\"32.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.34375\" x2=\"2.5938\" y2=\"32.40625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"32.34375\" x2=\"3.5938\" y2=\"32.40625\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"32.34375\" x2=\"5.5938\" y2=\"32.40625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"32.34375\" x2=\"7.0938\" y2=\"32.40625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.34375\" x2=\"10.0938\" y2=\"32.40625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"32.34375\" x2=\"12.0938\" y2=\"32.40625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"32.34375\" x2=\"13.0938\" y2=\"32.40625\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"32.34375\" x2=\"14.5938\" y2=\"32.40625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"32.34375\" x2=\"16.5938\" y2=\"32.40625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"32.34375\" x2=\"17.8438\" y2=\"32.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.40625\" x2=\"2.5938\" y2=\"32.46875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"32.40625\" x2=\"3.5938\" y2=\"32.46875\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"32.40625\" x2=\"5.5938\" y2=\"32.46875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"32.40625\" x2=\"7.0938\" y2=\"32.46875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.40625\" x2=\"10.0938\" y2=\"32.46875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"32.40625\" x2=\"12.0938\" y2=\"32.46875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"32.40625\" x2=\"13.0938\" y2=\"32.46875\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"32.40625\" x2=\"14.5938\" y2=\"32.46875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"32.40625\" x2=\"16.5938\" y2=\"32.46875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"32.40625\" x2=\"17.8438\" y2=\"32.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.46875\" x2=\"2.5938\" y2=\"32.53125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"32.46875\" x2=\"3.5938\" y2=\"32.53125\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"32.46875\" x2=\"5.5938\" y2=\"32.53125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"32.46875\" x2=\"7.0938\" y2=\"32.53125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.46875\" x2=\"10.0938\" y2=\"32.53125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"32.46875\" x2=\"12.0938\" y2=\"32.53125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"32.46875\" x2=\"13.0938\" y2=\"32.53125\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"32.46875\" x2=\"14.5938\" y2=\"32.53125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"32.46875\" x2=\"16.5938\" y2=\"32.53125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"32.46875\" x2=\"17.8438\" y2=\"32.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.53125\" x2=\"2.5938\" y2=\"32.59375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"32.53125\" x2=\"3.5938\" y2=\"32.59375\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"32.53125\" x2=\"5.5938\" y2=\"32.59375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"32.53125\" x2=\"7.0938\" y2=\"32.59375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.53125\" x2=\"10.0938\" y2=\"32.59375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"32.53125\" x2=\"12.0938\" y2=\"32.59375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"32.53125\" x2=\"13.0938\" y2=\"32.59375\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"32.53125\" x2=\"14.5938\" y2=\"32.59375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"32.53125\" x2=\"16.5938\" y2=\"32.59375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"32.53125\" x2=\"17.8438\" y2=\"32.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.59375\" x2=\"2.5938\" y2=\"32.65625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"32.59375\" x2=\"3.5938\" y2=\"32.65625\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"32.59375\" x2=\"5.5938\" y2=\"32.65625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"32.59375\" x2=\"7.0938\" y2=\"32.65625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.59375\" x2=\"10.0938\" y2=\"32.65625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"32.59375\" x2=\"12.0938\" y2=\"32.65625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"32.59375\" x2=\"13.0938\" y2=\"32.65625\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"32.59375\" x2=\"14.5938\" y2=\"32.65625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"32.59375\" x2=\"16.5938\" y2=\"32.65625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"32.59375\" x2=\"17.8438\" y2=\"32.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.65625\" x2=\"2.5938\" y2=\"32.71875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"32.65625\" x2=\"3.5938\" y2=\"32.71875\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"32.65625\" x2=\"5.5938\" y2=\"32.71875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"32.65625\" x2=\"7.0938\" y2=\"32.71875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.65625\" x2=\"10.0938\" y2=\"32.71875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"32.65625\" x2=\"12.0938\" y2=\"32.71875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"32.65625\" x2=\"13.0938\" y2=\"32.71875\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"32.65625\" x2=\"14.5938\" y2=\"32.71875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"32.65625\" x2=\"16.5938\" y2=\"32.71875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"32.65625\" x2=\"17.8438\" y2=\"32.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.71875\" x2=\"2.5938\" y2=\"32.78125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"32.71875\" x2=\"3.5938\" y2=\"32.78125\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"32.71875\" x2=\"5.5938\" y2=\"32.78125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"32.71875\" x2=\"7.0938\" y2=\"32.78125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.71875\" x2=\"10.0938\" y2=\"32.78125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"32.71875\" x2=\"12.0938\" y2=\"32.78125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"32.71875\" x2=\"13.0938\" y2=\"32.78125\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"32.71875\" x2=\"14.5938\" y2=\"32.78125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"32.71875\" x2=\"16.5938\" y2=\"32.78125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"32.71875\" x2=\"17.8438\" y2=\"32.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.78125\" x2=\"2.5938\" y2=\"32.84375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"32.78125\" x2=\"3.5938\" y2=\"32.84375\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"32.78125\" x2=\"5.5938\" y2=\"32.84375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"32.78125\" x2=\"7.0938\" y2=\"32.84375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"32.78125\" x2=\"10.0938\" y2=\"32.84375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"32.78125\" x2=\"12.0938\" y2=\"32.84375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"32.78125\" x2=\"13.0938\" y2=\"32.84375\" layer=\"25\"/>\n<rectangle x1=\"13.5938\" y1=\"32.78125\" x2=\"14.5938\" y2=\"32.84375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"32.78125\" x2=\"16.5938\" y2=\"32.84375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"32.78125\" x2=\"17.8438\" y2=\"32.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.84375\" x2=\"3.0938\" y2=\"32.90625\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"32.84375\" x2=\"6.0938\" y2=\"32.90625\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"32.84375\" x2=\"7.5938\" y2=\"32.90625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"32.84375\" x2=\"9.0938\" y2=\"32.90625\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"32.84375\" x2=\"10.0938\" y2=\"32.90625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"32.84375\" x2=\"12.0938\" y2=\"32.90625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"32.84375\" x2=\"13.5938\" y2=\"32.90625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"32.84375\" x2=\"16.0938\" y2=\"32.90625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"32.84375\" x2=\"17.8438\" y2=\"32.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.90625\" x2=\"3.0938\" y2=\"32.96875\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"32.90625\" x2=\"6.0938\" y2=\"32.96875\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"32.90625\" x2=\"7.5938\" y2=\"32.96875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"32.90625\" x2=\"9.0938\" y2=\"32.96875\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"32.90625\" x2=\"10.0938\" y2=\"32.96875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"32.90625\" x2=\"12.0938\" y2=\"32.96875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"32.90625\" x2=\"13.5938\" y2=\"32.96875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"32.90625\" x2=\"16.0938\" y2=\"32.96875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"32.90625\" x2=\"17.8438\" y2=\"32.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"32.96875\" x2=\"3.0938\" y2=\"33.03125\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"32.96875\" x2=\"6.0938\" y2=\"33.03125\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"32.96875\" x2=\"7.5938\" y2=\"33.03125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"32.96875\" x2=\"9.0938\" y2=\"33.03125\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"32.96875\" x2=\"10.0938\" y2=\"33.03125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"32.96875\" x2=\"12.0938\" y2=\"33.03125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"32.96875\" x2=\"13.5938\" y2=\"33.03125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"32.96875\" x2=\"16.0938\" y2=\"33.03125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"32.96875\" x2=\"17.8438\" y2=\"33.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.03125\" x2=\"3.0938\" y2=\"33.09375\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"33.03125\" x2=\"6.0938\" y2=\"33.09375\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"33.03125\" x2=\"7.5938\" y2=\"33.09375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"33.03125\" x2=\"9.0938\" y2=\"33.09375\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"33.03125\" x2=\"10.0938\" y2=\"33.09375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"33.03125\" x2=\"12.0938\" y2=\"33.09375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.03125\" x2=\"13.5938\" y2=\"33.09375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"33.03125\" x2=\"16.0938\" y2=\"33.09375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"33.03125\" x2=\"17.8438\" y2=\"33.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.09375\" x2=\"3.0938\" y2=\"33.15625\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"33.09375\" x2=\"6.0938\" y2=\"33.15625\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"33.09375\" x2=\"7.5938\" y2=\"33.15625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"33.09375\" x2=\"9.0938\" y2=\"33.15625\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"33.09375\" x2=\"10.0938\" y2=\"33.15625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"33.09375\" x2=\"12.0938\" y2=\"33.15625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.09375\" x2=\"13.5938\" y2=\"33.15625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"33.09375\" x2=\"16.0938\" y2=\"33.15625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"33.09375\" x2=\"17.8438\" y2=\"33.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.15625\" x2=\"3.0938\" y2=\"33.21875\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"33.15625\" x2=\"6.0938\" y2=\"33.21875\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"33.15625\" x2=\"7.5938\" y2=\"33.21875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"33.15625\" x2=\"9.0938\" y2=\"33.21875\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"33.15625\" x2=\"10.0938\" y2=\"33.21875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"33.15625\" x2=\"12.0938\" y2=\"33.21875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.15625\" x2=\"13.5938\" y2=\"33.21875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"33.15625\" x2=\"16.0938\" y2=\"33.21875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"33.15625\" x2=\"17.8438\" y2=\"33.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.21875\" x2=\"3.0938\" y2=\"33.28125\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"33.21875\" x2=\"6.0938\" y2=\"33.28125\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"33.21875\" x2=\"7.5938\" y2=\"33.28125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"33.21875\" x2=\"9.0938\" y2=\"33.28125\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"33.21875\" x2=\"10.0938\" y2=\"33.28125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"33.21875\" x2=\"12.0938\" y2=\"33.28125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.21875\" x2=\"13.5938\" y2=\"33.28125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"33.21875\" x2=\"16.0938\" y2=\"33.28125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"33.21875\" x2=\"17.8438\" y2=\"33.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.28125\" x2=\"3.0938\" y2=\"33.34375\" layer=\"25\"/>\n<rectangle x1=\"5.5938\" y1=\"33.28125\" x2=\"6.0938\" y2=\"33.34375\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"33.28125\" x2=\"7.5938\" y2=\"33.34375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"33.28125\" x2=\"9.0938\" y2=\"33.34375\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"33.28125\" x2=\"10.0938\" y2=\"33.34375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"33.28125\" x2=\"12.0938\" y2=\"33.34375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.28125\" x2=\"13.5938\" y2=\"33.34375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"33.28125\" x2=\"16.0938\" y2=\"33.34375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"33.28125\" x2=\"17.8438\" y2=\"33.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.34375\" x2=\"3.0938\" y2=\"33.40625\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"33.34375\" x2=\"4.0938\" y2=\"33.40625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"33.34375\" x2=\"6.5938\" y2=\"33.40625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"33.34375\" x2=\"8.0938\" y2=\"33.40625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"33.34375\" x2=\"12.0938\" y2=\"33.40625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.34375\" x2=\"14.0938\" y2=\"33.40625\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"33.34375\" x2=\"15.0938\" y2=\"33.40625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"33.34375\" x2=\"17.8438\" y2=\"33.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.40625\" x2=\"3.0938\" y2=\"33.46875\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"33.40625\" x2=\"4.0938\" y2=\"33.46875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"33.40625\" x2=\"6.5938\" y2=\"33.46875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"33.40625\" x2=\"8.0938\" y2=\"33.46875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"33.40625\" x2=\"12.0938\" y2=\"33.46875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.40625\" x2=\"14.0938\" y2=\"33.46875\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"33.40625\" x2=\"15.0938\" y2=\"33.46875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"33.40625\" x2=\"17.8438\" y2=\"33.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.46875\" x2=\"3.0938\" y2=\"33.53125\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"33.46875\" x2=\"4.0938\" y2=\"33.53125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"33.46875\" x2=\"6.5938\" y2=\"33.53125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"33.46875\" x2=\"8.0938\" y2=\"33.53125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"33.46875\" x2=\"12.0938\" y2=\"33.53125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.46875\" x2=\"14.0938\" y2=\"33.53125\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"33.46875\" x2=\"15.0938\" y2=\"33.53125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"33.46875\" x2=\"17.8438\" y2=\"33.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.53125\" x2=\"3.0938\" y2=\"33.59375\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"33.53125\" x2=\"4.0938\" y2=\"33.59375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"33.53125\" x2=\"6.5938\" y2=\"33.59375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"33.53125\" x2=\"8.0938\" y2=\"33.59375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"33.53125\" x2=\"12.0938\" y2=\"33.59375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.53125\" x2=\"14.0938\" y2=\"33.59375\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"33.53125\" x2=\"15.0938\" y2=\"33.59375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"33.53125\" x2=\"17.8438\" y2=\"33.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.59375\" x2=\"3.0938\" y2=\"33.65625\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"33.59375\" x2=\"4.0938\" y2=\"33.65625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"33.59375\" x2=\"6.5938\" y2=\"33.65625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"33.59375\" x2=\"8.0938\" y2=\"33.65625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"33.59375\" x2=\"12.0938\" y2=\"33.65625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.59375\" x2=\"14.0938\" y2=\"33.65625\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"33.59375\" x2=\"15.0938\" y2=\"33.65625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"33.59375\" x2=\"17.8438\" y2=\"33.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.65625\" x2=\"3.0938\" y2=\"33.71875\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"33.65625\" x2=\"4.0938\" y2=\"33.71875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"33.65625\" x2=\"6.5938\" y2=\"33.71875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"33.65625\" x2=\"8.0938\" y2=\"33.71875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"33.65625\" x2=\"12.0938\" y2=\"33.71875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.65625\" x2=\"14.0938\" y2=\"33.71875\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"33.65625\" x2=\"15.0938\" y2=\"33.71875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"33.65625\" x2=\"17.8438\" y2=\"33.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.71875\" x2=\"3.0938\" y2=\"33.78125\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"33.71875\" x2=\"4.0938\" y2=\"33.78125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"33.71875\" x2=\"6.5938\" y2=\"33.78125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"33.71875\" x2=\"8.0938\" y2=\"33.78125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"33.71875\" x2=\"12.0938\" y2=\"33.78125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.71875\" x2=\"14.0938\" y2=\"33.78125\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"33.71875\" x2=\"15.0938\" y2=\"33.78125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"33.71875\" x2=\"17.8438\" y2=\"33.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.78125\" x2=\"3.0938\" y2=\"33.84375\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"33.78125\" x2=\"4.0938\" y2=\"33.84375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"33.78125\" x2=\"6.5938\" y2=\"33.84375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"33.78125\" x2=\"8.0938\" y2=\"33.84375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"33.78125\" x2=\"12.0938\" y2=\"33.84375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.78125\" x2=\"14.0938\" y2=\"33.84375\" layer=\"25\"/>\n<rectangle x1=\"14.5938\" y1=\"33.78125\" x2=\"15.0938\" y2=\"33.84375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"33.78125\" x2=\"17.8438\" y2=\"33.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.84375\" x2=\"2.5938\" y2=\"33.90625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"33.84375\" x2=\"3.5938\" y2=\"33.90625\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"33.84375\" x2=\"6.0938\" y2=\"33.90625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"33.84375\" x2=\"7.5938\" y2=\"33.90625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"33.84375\" x2=\"10.0938\" y2=\"33.90625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"33.84375\" x2=\"12.0938\" y2=\"33.90625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.84375\" x2=\"13.5938\" y2=\"33.90625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"33.84375\" x2=\"16.5938\" y2=\"33.90625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"33.84375\" x2=\"17.8438\" y2=\"33.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.90625\" x2=\"2.5938\" y2=\"33.96875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"33.90625\" x2=\"3.5938\" y2=\"33.96875\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"33.90625\" x2=\"6.0938\" y2=\"33.96875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"33.90625\" x2=\"7.5938\" y2=\"33.96875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"33.90625\" x2=\"10.0938\" y2=\"33.96875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"33.90625\" x2=\"12.0938\" y2=\"33.96875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.90625\" x2=\"13.5938\" y2=\"33.96875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"33.90625\" x2=\"16.5938\" y2=\"33.96875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"33.90625\" x2=\"17.8438\" y2=\"33.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"33.96875\" x2=\"2.5938\" y2=\"34.03125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"33.96875\" x2=\"3.5938\" y2=\"34.03125\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"33.96875\" x2=\"6.0938\" y2=\"34.03125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"33.96875\" x2=\"7.5938\" y2=\"34.03125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"33.96875\" x2=\"10.0938\" y2=\"34.03125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"33.96875\" x2=\"12.0938\" y2=\"34.03125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"33.96875\" x2=\"13.5938\" y2=\"34.03125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"33.96875\" x2=\"16.5938\" y2=\"34.03125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"33.96875\" x2=\"17.8438\" y2=\"34.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.03125\" x2=\"2.5938\" y2=\"34.09375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"34.03125\" x2=\"3.5938\" y2=\"34.09375\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"34.03125\" x2=\"6.0938\" y2=\"34.09375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"34.03125\" x2=\"7.5938\" y2=\"34.09375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.03125\" x2=\"10.0938\" y2=\"34.09375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.03125\" x2=\"12.0938\" y2=\"34.09375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"34.03125\" x2=\"13.5938\" y2=\"34.09375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"34.03125\" x2=\"16.5938\" y2=\"34.09375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"34.03125\" x2=\"17.8438\" y2=\"34.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.09375\" x2=\"2.5938\" y2=\"34.15625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"34.09375\" x2=\"3.5938\" y2=\"34.15625\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"34.09375\" x2=\"6.0938\" y2=\"34.15625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"34.09375\" x2=\"7.5938\" y2=\"34.15625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.09375\" x2=\"10.0938\" y2=\"34.15625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.09375\" x2=\"12.0938\" y2=\"34.15625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"34.09375\" x2=\"13.5938\" y2=\"34.15625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"34.09375\" x2=\"16.5938\" y2=\"34.15625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"34.09375\" x2=\"17.8438\" y2=\"34.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.15625\" x2=\"2.5938\" y2=\"34.21875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"34.15625\" x2=\"3.5938\" y2=\"34.21875\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"34.15625\" x2=\"6.0938\" y2=\"34.21875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"34.15625\" x2=\"7.5938\" y2=\"34.21875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.15625\" x2=\"10.0938\" y2=\"34.21875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.15625\" x2=\"12.0938\" y2=\"34.21875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"34.15625\" x2=\"13.5938\" y2=\"34.21875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"34.15625\" x2=\"16.5938\" y2=\"34.21875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"34.15625\" x2=\"17.8438\" y2=\"34.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.21875\" x2=\"2.5938\" y2=\"34.28125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"34.21875\" x2=\"3.5938\" y2=\"34.28125\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"34.21875\" x2=\"6.0938\" y2=\"34.28125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"34.21875\" x2=\"7.5938\" y2=\"34.28125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.21875\" x2=\"10.0938\" y2=\"34.28125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.21875\" x2=\"12.0938\" y2=\"34.28125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"34.21875\" x2=\"13.5938\" y2=\"34.28125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"34.21875\" x2=\"16.5938\" y2=\"34.28125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"34.21875\" x2=\"17.8438\" y2=\"34.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.28125\" x2=\"2.5938\" y2=\"34.34375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"34.28125\" x2=\"3.5938\" y2=\"34.34375\" layer=\"25\"/>\n<rectangle x1=\"4.5938\" y1=\"34.28125\" x2=\"6.0938\" y2=\"34.34375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"34.28125\" x2=\"7.5938\" y2=\"34.34375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.28125\" x2=\"10.0938\" y2=\"34.34375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.28125\" x2=\"12.0938\" y2=\"34.34375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"34.28125\" x2=\"13.5938\" y2=\"34.34375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"34.28125\" x2=\"16.5938\" y2=\"34.34375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"34.28125\" x2=\"17.8438\" y2=\"34.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.34375\" x2=\"2.5938\" y2=\"34.40625\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"34.34375\" x2=\"5.0938\" y2=\"34.40625\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"34.34375\" x2=\"7.0938\" y2=\"34.40625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.34375\" x2=\"8.5938\" y2=\"34.40625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"34.34375\" x2=\"10.0938\" y2=\"34.40625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.34375\" x2=\"12.5938\" y2=\"34.40625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"34.34375\" x2=\"14.5938\" y2=\"34.40625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"34.34375\" x2=\"17.8438\" y2=\"34.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.40625\" x2=\"2.5938\" y2=\"34.46875\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"34.40625\" x2=\"5.0938\" y2=\"34.46875\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"34.40625\" x2=\"7.0938\" y2=\"34.46875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.40625\" x2=\"8.5938\" y2=\"34.46875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"34.40625\" x2=\"10.0938\" y2=\"34.46875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.40625\" x2=\"12.5938\" y2=\"34.46875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"34.40625\" x2=\"14.5938\" y2=\"34.46875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"34.40625\" x2=\"17.8438\" y2=\"34.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.46875\" x2=\"2.5938\" y2=\"34.53125\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"34.46875\" x2=\"5.0938\" y2=\"34.53125\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"34.46875\" x2=\"7.0938\" y2=\"34.53125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.46875\" x2=\"8.5938\" y2=\"34.53125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"34.46875\" x2=\"10.0938\" y2=\"34.53125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.46875\" x2=\"12.5938\" y2=\"34.53125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"34.46875\" x2=\"14.5938\" y2=\"34.53125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"34.46875\" x2=\"17.8438\" y2=\"34.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.53125\" x2=\"2.5938\" y2=\"34.59375\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"34.53125\" x2=\"5.0938\" y2=\"34.59375\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"34.53125\" x2=\"7.0938\" y2=\"34.59375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.53125\" x2=\"8.5938\" y2=\"34.59375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"34.53125\" x2=\"10.0938\" y2=\"34.59375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.53125\" x2=\"12.5938\" y2=\"34.59375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"34.53125\" x2=\"14.5938\" y2=\"34.59375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"34.53125\" x2=\"17.8438\" y2=\"34.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.59375\" x2=\"2.5938\" y2=\"34.65625\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"34.59375\" x2=\"5.0938\" y2=\"34.65625\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"34.59375\" x2=\"7.0938\" y2=\"34.65625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.59375\" x2=\"8.5938\" y2=\"34.65625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"34.59375\" x2=\"10.0938\" y2=\"34.65625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.59375\" x2=\"12.5938\" y2=\"34.65625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"34.59375\" x2=\"14.5938\" y2=\"34.65625\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"34.59375\" x2=\"17.8438\" y2=\"34.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.65625\" x2=\"2.5938\" y2=\"34.71875\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"34.65625\" x2=\"5.0938\" y2=\"34.71875\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"34.65625\" x2=\"7.0938\" y2=\"34.71875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.65625\" x2=\"8.5938\" y2=\"34.71875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"34.65625\" x2=\"10.0938\" y2=\"34.71875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.65625\" x2=\"12.5938\" y2=\"34.71875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"34.65625\" x2=\"14.5938\" y2=\"34.71875\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"34.65625\" x2=\"17.8438\" y2=\"34.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.71875\" x2=\"2.5938\" y2=\"34.78125\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"34.71875\" x2=\"5.0938\" y2=\"34.78125\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"34.71875\" x2=\"7.0938\" y2=\"34.78125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.71875\" x2=\"8.5938\" y2=\"34.78125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"34.71875\" x2=\"10.0938\" y2=\"34.78125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.71875\" x2=\"12.5938\" y2=\"34.78125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"34.71875\" x2=\"14.5938\" y2=\"34.78125\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"34.71875\" x2=\"17.8438\" y2=\"34.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.78125\" x2=\"2.5938\" y2=\"34.84375\" layer=\"25\"/>\n<rectangle x1=\"3.5938\" y1=\"34.78125\" x2=\"5.0938\" y2=\"34.84375\" layer=\"25\"/>\n<rectangle x1=\"6.5938\" y1=\"34.78125\" x2=\"7.0938\" y2=\"34.84375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"34.78125\" x2=\"8.5938\" y2=\"34.84375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"34.78125\" x2=\"10.0938\" y2=\"34.84375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"34.78125\" x2=\"12.5938\" y2=\"34.84375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"34.78125\" x2=\"14.5938\" y2=\"34.84375\" layer=\"25\"/>\n<rectangle x1=\"15.5938\" y1=\"34.78125\" x2=\"17.8438\" y2=\"34.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.84375\" x2=\"7.0938\" y2=\"34.90625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"34.84375\" x2=\"8.5938\" y2=\"34.90625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"34.84375\" x2=\"10.0938\" y2=\"34.90625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"34.84375\" x2=\"11.5938\" y2=\"34.90625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"34.84375\" x2=\"12.5938\" y2=\"34.90625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"34.84375\" x2=\"17.8438\" y2=\"34.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.90625\" x2=\"7.0938\" y2=\"34.96875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"34.90625\" x2=\"8.5938\" y2=\"34.96875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"34.90625\" x2=\"10.0938\" y2=\"34.96875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"34.90625\" x2=\"11.5938\" y2=\"34.96875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"34.90625\" x2=\"12.5938\" y2=\"34.96875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"34.90625\" x2=\"17.8438\" y2=\"34.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"34.96875\" x2=\"7.0938\" y2=\"35.03125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"34.96875\" x2=\"8.5938\" y2=\"35.03125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"34.96875\" x2=\"10.0938\" y2=\"35.03125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"34.96875\" x2=\"11.5938\" y2=\"35.03125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"34.96875\" x2=\"12.5938\" y2=\"35.03125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"34.96875\" x2=\"17.8438\" y2=\"35.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.03125\" x2=\"7.0938\" y2=\"35.09375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"35.03125\" x2=\"8.5938\" y2=\"35.09375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.03125\" x2=\"10.0938\" y2=\"35.09375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"35.03125\" x2=\"11.5938\" y2=\"35.09375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.03125\" x2=\"12.5938\" y2=\"35.09375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.03125\" x2=\"17.8438\" y2=\"35.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.09375\" x2=\"7.0938\" y2=\"35.15625\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"35.09375\" x2=\"8.5938\" y2=\"35.15625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.09375\" x2=\"10.0938\" y2=\"35.15625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"35.09375\" x2=\"11.5938\" y2=\"35.15625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.09375\" x2=\"12.5938\" y2=\"35.15625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.09375\" x2=\"17.8438\" y2=\"35.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.15625\" x2=\"7.0938\" y2=\"35.21875\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"35.15625\" x2=\"8.5938\" y2=\"35.21875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.15625\" x2=\"10.0938\" y2=\"35.21875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"35.15625\" x2=\"11.5938\" y2=\"35.21875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.15625\" x2=\"12.5938\" y2=\"35.21875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.15625\" x2=\"17.8438\" y2=\"35.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.21875\" x2=\"7.0938\" y2=\"35.28125\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"35.21875\" x2=\"8.5938\" y2=\"35.28125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.21875\" x2=\"10.0938\" y2=\"35.28125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"35.21875\" x2=\"11.5938\" y2=\"35.28125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.21875\" x2=\"12.5938\" y2=\"35.28125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.21875\" x2=\"17.8438\" y2=\"35.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.28125\" x2=\"7.0938\" y2=\"35.34375\" layer=\"25\"/>\n<rectangle x1=\"7.5938\" y1=\"35.28125\" x2=\"8.5938\" y2=\"35.34375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.28125\" x2=\"10.0938\" y2=\"35.34375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"35.28125\" x2=\"11.5938\" y2=\"35.34375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.28125\" x2=\"12.5938\" y2=\"35.34375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.28125\" x2=\"17.8438\" y2=\"35.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.34375\" x2=\"2.5938\" y2=\"35.40625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"35.34375\" x2=\"6.5938\" y2=\"35.40625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"35.34375\" x2=\"7.5938\" y2=\"35.40625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"35.34375\" x2=\"8.5938\" y2=\"35.40625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.34375\" x2=\"9.5938\" y2=\"35.40625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"35.34375\" x2=\"10.5938\" y2=\"35.40625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"35.34375\" x2=\"11.5938\" y2=\"35.40625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.34375\" x2=\"12.5938\" y2=\"35.40625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.34375\" x2=\"13.5938\" y2=\"35.40625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"35.34375\" x2=\"17.8438\" y2=\"35.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.40625\" x2=\"2.5938\" y2=\"35.46875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"35.40625\" x2=\"6.5938\" y2=\"35.46875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"35.40625\" x2=\"7.5938\" y2=\"35.46875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"35.40625\" x2=\"8.5938\" y2=\"35.46875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.40625\" x2=\"9.5938\" y2=\"35.46875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"35.40625\" x2=\"10.5938\" y2=\"35.46875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"35.40625\" x2=\"11.5938\" y2=\"35.46875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.40625\" x2=\"12.5938\" y2=\"35.46875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.40625\" x2=\"13.5938\" y2=\"35.46875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"35.40625\" x2=\"17.8438\" y2=\"35.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.46875\" x2=\"2.5938\" y2=\"35.53125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"35.46875\" x2=\"6.5938\" y2=\"35.53125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"35.46875\" x2=\"7.5938\" y2=\"35.53125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"35.46875\" x2=\"8.5938\" y2=\"35.53125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.46875\" x2=\"9.5938\" y2=\"35.53125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"35.46875\" x2=\"10.5938\" y2=\"35.53125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"35.46875\" x2=\"11.5938\" y2=\"35.53125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.46875\" x2=\"12.5938\" y2=\"35.53125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.46875\" x2=\"13.5938\" y2=\"35.53125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"35.46875\" x2=\"17.8438\" y2=\"35.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.53125\" x2=\"2.5938\" y2=\"35.59375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"35.53125\" x2=\"6.5938\" y2=\"35.59375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"35.53125\" x2=\"7.5938\" y2=\"35.59375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"35.53125\" x2=\"8.5938\" y2=\"35.59375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.53125\" x2=\"9.5938\" y2=\"35.59375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"35.53125\" x2=\"10.5938\" y2=\"35.59375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"35.53125\" x2=\"11.5938\" y2=\"35.59375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.53125\" x2=\"12.5938\" y2=\"35.59375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.53125\" x2=\"13.5938\" y2=\"35.59375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"35.53125\" x2=\"17.8438\" y2=\"35.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.59375\" x2=\"2.5938\" y2=\"35.65625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"35.59375\" x2=\"6.5938\" y2=\"35.65625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"35.59375\" x2=\"7.5938\" y2=\"35.65625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"35.59375\" x2=\"8.5938\" y2=\"35.65625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.59375\" x2=\"9.5938\" y2=\"35.65625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"35.59375\" x2=\"10.5938\" y2=\"35.65625\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"35.59375\" x2=\"11.5938\" y2=\"35.65625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.59375\" x2=\"12.5938\" y2=\"35.65625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.59375\" x2=\"13.5938\" y2=\"35.65625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"35.59375\" x2=\"17.8438\" y2=\"35.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.65625\" x2=\"2.5938\" y2=\"35.71875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"35.65625\" x2=\"6.5938\" y2=\"35.71875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"35.65625\" x2=\"7.5938\" y2=\"35.71875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"35.65625\" x2=\"8.5938\" y2=\"35.71875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.65625\" x2=\"9.5938\" y2=\"35.71875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"35.65625\" x2=\"10.5938\" y2=\"35.71875\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"35.65625\" x2=\"11.5938\" y2=\"35.71875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.65625\" x2=\"12.5938\" y2=\"35.71875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.65625\" x2=\"13.5938\" y2=\"35.71875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"35.65625\" x2=\"17.8438\" y2=\"35.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.71875\" x2=\"2.5938\" y2=\"35.78125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"35.71875\" x2=\"6.5938\" y2=\"35.78125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"35.71875\" x2=\"7.5938\" y2=\"35.78125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"35.71875\" x2=\"8.5938\" y2=\"35.78125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.71875\" x2=\"9.5938\" y2=\"35.78125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"35.71875\" x2=\"10.5938\" y2=\"35.78125\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"35.71875\" x2=\"11.5938\" y2=\"35.78125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.71875\" x2=\"12.5938\" y2=\"35.78125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.71875\" x2=\"13.5938\" y2=\"35.78125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"35.71875\" x2=\"17.8438\" y2=\"35.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.78125\" x2=\"2.5938\" y2=\"35.84375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"35.78125\" x2=\"6.5938\" y2=\"35.84375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"35.78125\" x2=\"7.5938\" y2=\"35.84375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"35.78125\" x2=\"8.5938\" y2=\"35.84375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"35.78125\" x2=\"9.5938\" y2=\"35.84375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"35.78125\" x2=\"10.5938\" y2=\"35.84375\" layer=\"25\"/>\n<rectangle x1=\"11.0938\" y1=\"35.78125\" x2=\"11.5938\" y2=\"35.84375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"35.78125\" x2=\"12.5938\" y2=\"35.84375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"35.78125\" x2=\"13.5938\" y2=\"35.84375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"35.78125\" x2=\"17.8438\" y2=\"35.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.84375\" x2=\"2.5938\" y2=\"35.90625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"35.84375\" x2=\"5.5938\" y2=\"35.90625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"35.84375\" x2=\"7.0938\" y2=\"35.90625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"35.84375\" x2=\"9.0938\" y2=\"35.90625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"35.84375\" x2=\"10.5938\" y2=\"35.90625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"35.84375\" x2=\"13.5938\" y2=\"35.90625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"35.84375\" x2=\"16.5938\" y2=\"35.90625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"35.84375\" x2=\"17.8438\" y2=\"35.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.90625\" x2=\"2.5938\" y2=\"35.96875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"35.90625\" x2=\"5.5938\" y2=\"35.96875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"35.90625\" x2=\"7.0938\" y2=\"35.96875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"35.90625\" x2=\"9.0938\" y2=\"35.96875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"35.90625\" x2=\"10.5938\" y2=\"35.96875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"35.90625\" x2=\"13.5938\" y2=\"35.96875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"35.90625\" x2=\"16.5938\" y2=\"35.96875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"35.90625\" x2=\"17.8438\" y2=\"35.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"35.96875\" x2=\"2.5938\" y2=\"36.03125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"35.96875\" x2=\"5.5938\" y2=\"36.03125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"35.96875\" x2=\"7.0938\" y2=\"36.03125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"35.96875\" x2=\"9.0938\" y2=\"36.03125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"35.96875\" x2=\"10.5938\" y2=\"36.03125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"35.96875\" x2=\"13.5938\" y2=\"36.03125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"35.96875\" x2=\"16.5938\" y2=\"36.03125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"35.96875\" x2=\"17.8438\" y2=\"36.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.03125\" x2=\"2.5938\" y2=\"36.09375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.03125\" x2=\"5.5938\" y2=\"36.09375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.03125\" x2=\"7.0938\" y2=\"36.09375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.03125\" x2=\"9.0938\" y2=\"36.09375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"36.03125\" x2=\"10.5938\" y2=\"36.09375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"36.03125\" x2=\"13.5938\" y2=\"36.09375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.03125\" x2=\"16.5938\" y2=\"36.09375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.03125\" x2=\"17.8438\" y2=\"36.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.09375\" x2=\"2.5938\" y2=\"36.15625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.09375\" x2=\"5.5938\" y2=\"36.15625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.09375\" x2=\"7.0938\" y2=\"36.15625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.09375\" x2=\"9.0938\" y2=\"36.15625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"36.09375\" x2=\"10.5938\" y2=\"36.15625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"36.09375\" x2=\"13.5938\" y2=\"36.15625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.09375\" x2=\"16.5938\" y2=\"36.15625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.09375\" x2=\"17.8438\" y2=\"36.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.15625\" x2=\"2.5938\" y2=\"36.21875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.15625\" x2=\"5.5938\" y2=\"36.21875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.15625\" x2=\"7.0938\" y2=\"36.21875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.15625\" x2=\"9.0938\" y2=\"36.21875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"36.15625\" x2=\"10.5938\" y2=\"36.21875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"36.15625\" x2=\"13.5938\" y2=\"36.21875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.15625\" x2=\"16.5938\" y2=\"36.21875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.15625\" x2=\"17.8438\" y2=\"36.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.21875\" x2=\"2.5938\" y2=\"36.28125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.21875\" x2=\"5.5938\" y2=\"36.28125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.21875\" x2=\"7.0938\" y2=\"36.28125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.21875\" x2=\"9.0938\" y2=\"36.28125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"36.21875\" x2=\"10.5938\" y2=\"36.28125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"36.21875\" x2=\"13.5938\" y2=\"36.28125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.21875\" x2=\"16.5938\" y2=\"36.28125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.21875\" x2=\"17.8438\" y2=\"36.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.28125\" x2=\"2.5938\" y2=\"36.34375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.28125\" x2=\"5.5938\" y2=\"36.34375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.28125\" x2=\"7.0938\" y2=\"36.34375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.28125\" x2=\"9.0938\" y2=\"36.34375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"36.28125\" x2=\"10.5938\" y2=\"36.34375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"36.28125\" x2=\"13.5938\" y2=\"36.34375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.28125\" x2=\"16.5938\" y2=\"36.34375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.28125\" x2=\"17.8438\" y2=\"36.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.34375\" x2=\"2.5938\" y2=\"36.40625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.34375\" x2=\"3.5938\" y2=\"36.40625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"36.34375\" x2=\"5.5938\" y2=\"36.40625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.34375\" x2=\"6.5938\" y2=\"36.40625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"36.34375\" x2=\"7.5938\" y2=\"36.40625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.34375\" x2=\"8.5938\" y2=\"36.40625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"36.34375\" x2=\"11.5938\" y2=\"36.40625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"36.34375\" x2=\"13.5938\" y2=\"36.40625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.34375\" x2=\"14.5938\" y2=\"36.40625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"36.34375\" x2=\"16.5938\" y2=\"36.40625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.34375\" x2=\"17.8438\" y2=\"36.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.40625\" x2=\"2.5938\" y2=\"36.46875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.40625\" x2=\"3.5938\" y2=\"36.46875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"36.40625\" x2=\"5.5938\" y2=\"36.46875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.40625\" x2=\"6.5938\" y2=\"36.46875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"36.40625\" x2=\"7.5938\" y2=\"36.46875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.40625\" x2=\"8.5938\" y2=\"36.46875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"36.40625\" x2=\"11.5938\" y2=\"36.46875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"36.40625\" x2=\"13.5938\" y2=\"36.46875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.40625\" x2=\"14.5938\" y2=\"36.46875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"36.40625\" x2=\"16.5938\" y2=\"36.46875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.40625\" x2=\"17.8438\" y2=\"36.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.46875\" x2=\"2.5938\" y2=\"36.53125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.46875\" x2=\"3.5938\" y2=\"36.53125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"36.46875\" x2=\"5.5938\" y2=\"36.53125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.46875\" x2=\"6.5938\" y2=\"36.53125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"36.46875\" x2=\"7.5938\" y2=\"36.53125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.46875\" x2=\"8.5938\" y2=\"36.53125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"36.46875\" x2=\"11.5938\" y2=\"36.53125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"36.46875\" x2=\"13.5938\" y2=\"36.53125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.46875\" x2=\"14.5938\" y2=\"36.53125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"36.46875\" x2=\"16.5938\" y2=\"36.53125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.46875\" x2=\"17.8438\" y2=\"36.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.53125\" x2=\"2.5938\" y2=\"36.59375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.53125\" x2=\"3.5938\" y2=\"36.59375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"36.53125\" x2=\"5.5938\" y2=\"36.59375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.53125\" x2=\"6.5938\" y2=\"36.59375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"36.53125\" x2=\"7.5938\" y2=\"36.59375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.53125\" x2=\"8.5938\" y2=\"36.59375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"36.53125\" x2=\"11.5938\" y2=\"36.59375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"36.53125\" x2=\"13.5938\" y2=\"36.59375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.53125\" x2=\"14.5938\" y2=\"36.59375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"36.53125\" x2=\"16.5938\" y2=\"36.59375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.53125\" x2=\"17.8438\" y2=\"36.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.59375\" x2=\"2.5938\" y2=\"36.65625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.59375\" x2=\"3.5938\" y2=\"36.65625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"36.59375\" x2=\"5.5938\" y2=\"36.65625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.59375\" x2=\"6.5938\" y2=\"36.65625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"36.59375\" x2=\"7.5938\" y2=\"36.65625\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.59375\" x2=\"8.5938\" y2=\"36.65625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"36.59375\" x2=\"11.5938\" y2=\"36.65625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"36.59375\" x2=\"13.5938\" y2=\"36.65625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.59375\" x2=\"14.5938\" y2=\"36.65625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"36.59375\" x2=\"16.5938\" y2=\"36.65625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.59375\" x2=\"17.8438\" y2=\"36.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.65625\" x2=\"2.5938\" y2=\"36.71875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.65625\" x2=\"3.5938\" y2=\"36.71875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"36.65625\" x2=\"5.5938\" y2=\"36.71875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.65625\" x2=\"6.5938\" y2=\"36.71875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"36.65625\" x2=\"7.5938\" y2=\"36.71875\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.65625\" x2=\"8.5938\" y2=\"36.71875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"36.65625\" x2=\"11.5938\" y2=\"36.71875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"36.65625\" x2=\"13.5938\" y2=\"36.71875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.65625\" x2=\"14.5938\" y2=\"36.71875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"36.65625\" x2=\"16.5938\" y2=\"36.71875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.65625\" x2=\"17.8438\" y2=\"36.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.71875\" x2=\"2.5938\" y2=\"36.78125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.71875\" x2=\"3.5938\" y2=\"36.78125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"36.71875\" x2=\"5.5938\" y2=\"36.78125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.71875\" x2=\"6.5938\" y2=\"36.78125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"36.71875\" x2=\"7.5938\" y2=\"36.78125\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.71875\" x2=\"8.5938\" y2=\"36.78125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"36.71875\" x2=\"11.5938\" y2=\"36.78125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"36.71875\" x2=\"13.5938\" y2=\"36.78125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.71875\" x2=\"14.5938\" y2=\"36.78125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"36.71875\" x2=\"16.5938\" y2=\"36.78125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.71875\" x2=\"17.8438\" y2=\"36.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.78125\" x2=\"2.5938\" y2=\"36.84375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.78125\" x2=\"3.5938\" y2=\"36.84375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"36.78125\" x2=\"5.5938\" y2=\"36.84375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.78125\" x2=\"6.5938\" y2=\"36.84375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"36.78125\" x2=\"7.5938\" y2=\"36.84375\" layer=\"25\"/>\n<rectangle x1=\"8.0938\" y1=\"36.78125\" x2=\"8.5938\" y2=\"36.84375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"36.78125\" x2=\"11.5938\" y2=\"36.84375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"36.78125\" x2=\"13.5938\" y2=\"36.84375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.78125\" x2=\"14.5938\" y2=\"36.84375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"36.78125\" x2=\"16.5938\" y2=\"36.84375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.78125\" x2=\"17.8438\" y2=\"36.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.84375\" x2=\"2.5938\" y2=\"36.90625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.84375\" x2=\"3.5938\" y2=\"36.90625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"36.84375\" x2=\"5.5938\" y2=\"36.90625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.84375\" x2=\"6.5938\" y2=\"36.90625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"36.84375\" x2=\"7.5938\" y2=\"36.90625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"36.84375\" x2=\"9.5938\" y2=\"36.90625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"36.84375\" x2=\"10.5938\" y2=\"36.90625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"36.84375\" x2=\"13.5938\" y2=\"36.90625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.84375\" x2=\"14.5938\" y2=\"36.90625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"36.84375\" x2=\"16.5938\" y2=\"36.90625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.84375\" x2=\"17.8438\" y2=\"36.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.90625\" x2=\"2.5938\" y2=\"36.96875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.90625\" x2=\"3.5938\" y2=\"36.96875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"36.90625\" x2=\"5.5938\" y2=\"36.96875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.90625\" x2=\"6.5938\" y2=\"36.96875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"36.90625\" x2=\"7.5938\" y2=\"36.96875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"36.90625\" x2=\"9.5938\" y2=\"36.96875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"36.90625\" x2=\"10.5938\" y2=\"36.96875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"36.90625\" x2=\"13.5938\" y2=\"36.96875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.90625\" x2=\"14.5938\" y2=\"36.96875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"36.90625\" x2=\"16.5938\" y2=\"36.96875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.90625\" x2=\"17.8438\" y2=\"36.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"36.96875\" x2=\"2.5938\" y2=\"37.03125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"36.96875\" x2=\"3.5938\" y2=\"37.03125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"36.96875\" x2=\"5.5938\" y2=\"37.03125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"36.96875\" x2=\"6.5938\" y2=\"37.03125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"36.96875\" x2=\"7.5938\" y2=\"37.03125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"36.96875\" x2=\"9.5938\" y2=\"37.03125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"36.96875\" x2=\"10.5938\" y2=\"37.03125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"36.96875\" x2=\"13.5938\" y2=\"37.03125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"36.96875\" x2=\"14.5938\" y2=\"37.03125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"36.96875\" x2=\"16.5938\" y2=\"37.03125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"36.96875\" x2=\"17.8438\" y2=\"37.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.03125\" x2=\"2.5938\" y2=\"37.09375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.03125\" x2=\"3.5938\" y2=\"37.09375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.03125\" x2=\"5.5938\" y2=\"37.09375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.03125\" x2=\"6.5938\" y2=\"37.09375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"37.03125\" x2=\"7.5938\" y2=\"37.09375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.03125\" x2=\"9.5938\" y2=\"37.09375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"37.03125\" x2=\"10.5938\" y2=\"37.09375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"37.03125\" x2=\"13.5938\" y2=\"37.09375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.03125\" x2=\"14.5938\" y2=\"37.09375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.03125\" x2=\"16.5938\" y2=\"37.09375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.03125\" x2=\"17.8438\" y2=\"37.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.09375\" x2=\"2.5938\" y2=\"37.15625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.09375\" x2=\"3.5938\" y2=\"37.15625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.09375\" x2=\"5.5938\" y2=\"37.15625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.09375\" x2=\"6.5938\" y2=\"37.15625\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"37.09375\" x2=\"7.5938\" y2=\"37.15625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.09375\" x2=\"9.5938\" y2=\"37.15625\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"37.09375\" x2=\"10.5938\" y2=\"37.15625\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"37.09375\" x2=\"13.5938\" y2=\"37.15625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.09375\" x2=\"14.5938\" y2=\"37.15625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.09375\" x2=\"16.5938\" y2=\"37.15625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.09375\" x2=\"17.8438\" y2=\"37.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.15625\" x2=\"2.5938\" y2=\"37.21875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.15625\" x2=\"3.5938\" y2=\"37.21875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.15625\" x2=\"5.5938\" y2=\"37.21875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.15625\" x2=\"6.5938\" y2=\"37.21875\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"37.15625\" x2=\"7.5938\" y2=\"37.21875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.15625\" x2=\"9.5938\" y2=\"37.21875\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"37.15625\" x2=\"10.5938\" y2=\"37.21875\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"37.15625\" x2=\"13.5938\" y2=\"37.21875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.15625\" x2=\"14.5938\" y2=\"37.21875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.15625\" x2=\"16.5938\" y2=\"37.21875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.15625\" x2=\"17.8438\" y2=\"37.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.21875\" x2=\"2.5938\" y2=\"37.28125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.21875\" x2=\"3.5938\" y2=\"37.28125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.21875\" x2=\"5.5938\" y2=\"37.28125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.21875\" x2=\"6.5938\" y2=\"37.28125\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"37.21875\" x2=\"7.5938\" y2=\"37.28125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.21875\" x2=\"9.5938\" y2=\"37.28125\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"37.21875\" x2=\"10.5938\" y2=\"37.28125\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"37.21875\" x2=\"13.5938\" y2=\"37.28125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.21875\" x2=\"14.5938\" y2=\"37.28125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.21875\" x2=\"16.5938\" y2=\"37.28125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.21875\" x2=\"17.8438\" y2=\"37.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.28125\" x2=\"2.5938\" y2=\"37.34375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.28125\" x2=\"3.5938\" y2=\"37.34375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.28125\" x2=\"5.5938\" y2=\"37.34375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.28125\" x2=\"6.5938\" y2=\"37.34375\" layer=\"25\"/>\n<rectangle x1=\"7.0938\" y1=\"37.28125\" x2=\"7.5938\" y2=\"37.34375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.28125\" x2=\"9.5938\" y2=\"37.34375\" layer=\"25\"/>\n<rectangle x1=\"10.0938\" y1=\"37.28125\" x2=\"10.5938\" y2=\"37.34375\" layer=\"25\"/>\n<rectangle x1=\"12.0938\" y1=\"37.28125\" x2=\"13.5938\" y2=\"37.34375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.28125\" x2=\"14.5938\" y2=\"37.34375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.28125\" x2=\"16.5938\" y2=\"37.34375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.28125\" x2=\"17.8438\" y2=\"37.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.34375\" x2=\"2.5938\" y2=\"37.40625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.34375\" x2=\"3.5938\" y2=\"37.40625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.34375\" x2=\"5.5938\" y2=\"37.40625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.34375\" x2=\"7.0938\" y2=\"37.40625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.34375\" x2=\"9.0938\" y2=\"37.40625\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"37.34375\" x2=\"12.0938\" y2=\"37.40625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"37.34375\" x2=\"13.5938\" y2=\"37.40625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.34375\" x2=\"14.5938\" y2=\"37.40625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.34375\" x2=\"16.5938\" y2=\"37.40625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.34375\" x2=\"17.8438\" y2=\"37.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.40625\" x2=\"2.5938\" y2=\"37.46875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.40625\" x2=\"3.5938\" y2=\"37.46875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.40625\" x2=\"5.5938\" y2=\"37.46875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.40625\" x2=\"7.0938\" y2=\"37.46875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.40625\" x2=\"9.0938\" y2=\"37.46875\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"37.40625\" x2=\"12.0938\" y2=\"37.46875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"37.40625\" x2=\"13.5938\" y2=\"37.46875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.40625\" x2=\"14.5938\" y2=\"37.46875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.40625\" x2=\"16.5938\" y2=\"37.46875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.40625\" x2=\"17.8438\" y2=\"37.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.46875\" x2=\"2.5938\" y2=\"37.53125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.46875\" x2=\"3.5938\" y2=\"37.53125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.46875\" x2=\"5.5938\" y2=\"37.53125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.46875\" x2=\"7.0938\" y2=\"37.53125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.46875\" x2=\"9.0938\" y2=\"37.53125\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"37.46875\" x2=\"12.0938\" y2=\"37.53125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"37.46875\" x2=\"13.5938\" y2=\"37.53125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.46875\" x2=\"14.5938\" y2=\"37.53125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.46875\" x2=\"16.5938\" y2=\"37.53125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.46875\" x2=\"17.8438\" y2=\"37.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.53125\" x2=\"2.5938\" y2=\"37.59375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.53125\" x2=\"3.5938\" y2=\"37.59375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.53125\" x2=\"5.5938\" y2=\"37.59375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.53125\" x2=\"7.0938\" y2=\"37.59375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.53125\" x2=\"9.0938\" y2=\"37.59375\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"37.53125\" x2=\"12.0938\" y2=\"37.59375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"37.53125\" x2=\"13.5938\" y2=\"37.59375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.53125\" x2=\"14.5938\" y2=\"37.59375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.53125\" x2=\"16.5938\" y2=\"37.59375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.53125\" x2=\"17.8438\" y2=\"37.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.59375\" x2=\"2.5938\" y2=\"37.65625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.59375\" x2=\"3.5938\" y2=\"37.65625\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.59375\" x2=\"5.5938\" y2=\"37.65625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.59375\" x2=\"7.0938\" y2=\"37.65625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.59375\" x2=\"9.0938\" y2=\"37.65625\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"37.59375\" x2=\"12.0938\" y2=\"37.65625\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"37.59375\" x2=\"13.5938\" y2=\"37.65625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.59375\" x2=\"14.5938\" y2=\"37.65625\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.59375\" x2=\"16.5938\" y2=\"37.65625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.59375\" x2=\"17.8438\" y2=\"37.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.65625\" x2=\"2.5938\" y2=\"37.71875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.65625\" x2=\"3.5938\" y2=\"37.71875\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.65625\" x2=\"5.5938\" y2=\"37.71875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.65625\" x2=\"7.0938\" y2=\"37.71875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.65625\" x2=\"9.0938\" y2=\"37.71875\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"37.65625\" x2=\"12.0938\" y2=\"37.71875\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"37.65625\" x2=\"13.5938\" y2=\"37.71875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.65625\" x2=\"14.5938\" y2=\"37.71875\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.65625\" x2=\"16.5938\" y2=\"37.71875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.65625\" x2=\"17.8438\" y2=\"37.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.71875\" x2=\"2.5938\" y2=\"37.78125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.71875\" x2=\"3.5938\" y2=\"37.78125\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.71875\" x2=\"5.5938\" y2=\"37.78125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.71875\" x2=\"7.0938\" y2=\"37.78125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.71875\" x2=\"9.0938\" y2=\"37.78125\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"37.71875\" x2=\"12.0938\" y2=\"37.78125\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"37.71875\" x2=\"13.5938\" y2=\"37.78125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.71875\" x2=\"14.5938\" y2=\"37.78125\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.71875\" x2=\"16.5938\" y2=\"37.78125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.71875\" x2=\"17.8438\" y2=\"37.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.78125\" x2=\"2.5938\" y2=\"37.84375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.78125\" x2=\"3.5938\" y2=\"37.84375\" layer=\"25\"/>\n<rectangle x1=\"5.0938\" y1=\"37.78125\" x2=\"5.5938\" y2=\"37.84375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.78125\" x2=\"7.0938\" y2=\"37.84375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"37.78125\" x2=\"9.0938\" y2=\"37.84375\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"37.78125\" x2=\"12.0938\" y2=\"37.84375\" layer=\"25\"/>\n<rectangle x1=\"13.0938\" y1=\"37.78125\" x2=\"13.5938\" y2=\"37.84375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.78125\" x2=\"14.5938\" y2=\"37.84375\" layer=\"25\"/>\n<rectangle x1=\"16.0938\" y1=\"37.78125\" x2=\"16.5938\" y2=\"37.84375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.78125\" x2=\"17.8438\" y2=\"37.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.84375\" x2=\"2.5938\" y2=\"37.90625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.84375\" x2=\"5.5938\" y2=\"37.90625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.84375\" x2=\"8.0938\" y2=\"37.90625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"37.84375\" x2=\"9.5938\" y2=\"37.90625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"37.84375\" x2=\"11.0938\" y2=\"37.90625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"37.84375\" x2=\"12.0938\" y2=\"37.90625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"37.84375\" x2=\"13.5938\" y2=\"37.90625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.84375\" x2=\"16.5938\" y2=\"37.90625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.84375\" x2=\"17.8438\" y2=\"37.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.90625\" x2=\"2.5938\" y2=\"37.96875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.90625\" x2=\"5.5938\" y2=\"37.96875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.90625\" x2=\"8.0938\" y2=\"37.96875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"37.90625\" x2=\"9.5938\" y2=\"37.96875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"37.90625\" x2=\"11.0938\" y2=\"37.96875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"37.90625\" x2=\"12.0938\" y2=\"37.96875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"37.90625\" x2=\"13.5938\" y2=\"37.96875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.90625\" x2=\"16.5938\" y2=\"37.96875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.90625\" x2=\"17.8438\" y2=\"37.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"37.96875\" x2=\"2.5938\" y2=\"38.03125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"37.96875\" x2=\"5.5938\" y2=\"38.03125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"37.96875\" x2=\"8.0938\" y2=\"38.03125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"37.96875\" x2=\"9.5938\" y2=\"38.03125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"37.96875\" x2=\"11.0938\" y2=\"38.03125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"37.96875\" x2=\"12.0938\" y2=\"38.03125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"37.96875\" x2=\"13.5938\" y2=\"38.03125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"37.96875\" x2=\"16.5938\" y2=\"38.03125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"37.96875\" x2=\"17.8438\" y2=\"38.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.03125\" x2=\"2.5938\" y2=\"38.09375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"38.03125\" x2=\"5.5938\" y2=\"38.09375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.03125\" x2=\"8.0938\" y2=\"38.09375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"38.03125\" x2=\"9.5938\" y2=\"38.09375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.03125\" x2=\"11.0938\" y2=\"38.09375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.03125\" x2=\"12.0938\" y2=\"38.09375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"38.03125\" x2=\"13.5938\" y2=\"38.09375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"38.03125\" x2=\"16.5938\" y2=\"38.09375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.03125\" x2=\"17.8438\" y2=\"38.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.09375\" x2=\"2.5938\" y2=\"38.15625\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"38.09375\" x2=\"5.5938\" y2=\"38.15625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.09375\" x2=\"8.0938\" y2=\"38.15625\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"38.09375\" x2=\"9.5938\" y2=\"38.15625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.09375\" x2=\"11.0938\" y2=\"38.15625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.09375\" x2=\"12.0938\" y2=\"38.15625\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"38.09375\" x2=\"13.5938\" y2=\"38.15625\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"38.09375\" x2=\"16.5938\" y2=\"38.15625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.09375\" x2=\"17.8438\" y2=\"38.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.15625\" x2=\"2.5938\" y2=\"38.21875\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"38.15625\" x2=\"5.5938\" y2=\"38.21875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.15625\" x2=\"8.0938\" y2=\"38.21875\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"38.15625\" x2=\"9.5938\" y2=\"38.21875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.15625\" x2=\"11.0938\" y2=\"38.21875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.15625\" x2=\"12.0938\" y2=\"38.21875\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"38.15625\" x2=\"13.5938\" y2=\"38.21875\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"38.15625\" x2=\"16.5938\" y2=\"38.21875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.15625\" x2=\"17.8438\" y2=\"38.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.21875\" x2=\"2.5938\" y2=\"38.28125\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"38.21875\" x2=\"5.5938\" y2=\"38.28125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.21875\" x2=\"8.0938\" y2=\"38.28125\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"38.21875\" x2=\"9.5938\" y2=\"38.28125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.21875\" x2=\"11.0938\" y2=\"38.28125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.21875\" x2=\"12.0938\" y2=\"38.28125\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"38.21875\" x2=\"13.5938\" y2=\"38.28125\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"38.21875\" x2=\"16.5938\" y2=\"38.28125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.21875\" x2=\"17.8438\" y2=\"38.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.28125\" x2=\"2.5938\" y2=\"38.34375\" layer=\"25\"/>\n<rectangle x1=\"3.0938\" y1=\"38.28125\" x2=\"5.5938\" y2=\"38.34375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.28125\" x2=\"8.0938\" y2=\"38.34375\" layer=\"25\"/>\n<rectangle x1=\"9.0938\" y1=\"38.28125\" x2=\"9.5938\" y2=\"38.34375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.28125\" x2=\"11.0938\" y2=\"38.34375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.28125\" x2=\"12.0938\" y2=\"38.34375\" layer=\"25\"/>\n<rectangle x1=\"12.5938\" y1=\"38.28125\" x2=\"13.5938\" y2=\"38.34375\" layer=\"25\"/>\n<rectangle x1=\"14.0938\" y1=\"38.28125\" x2=\"16.5938\" y2=\"38.34375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.28125\" x2=\"17.8438\" y2=\"38.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.34375\" x2=\"2.5938\" y2=\"38.40625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.34375\" x2=\"7.0938\" y2=\"38.40625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"38.34375\" x2=\"9.0938\" y2=\"38.40625\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"38.34375\" x2=\"10.0938\" y2=\"38.40625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.34375\" x2=\"11.0938\" y2=\"38.40625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.34375\" x2=\"13.5938\" y2=\"38.40625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.34375\" x2=\"17.8438\" y2=\"38.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.40625\" x2=\"2.5938\" y2=\"38.46875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.40625\" x2=\"7.0938\" y2=\"38.46875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"38.40625\" x2=\"9.0938\" y2=\"38.46875\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"38.40625\" x2=\"10.0938\" y2=\"38.46875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.40625\" x2=\"11.0938\" y2=\"38.46875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.40625\" x2=\"13.5938\" y2=\"38.46875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.40625\" x2=\"17.8438\" y2=\"38.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.46875\" x2=\"2.5938\" y2=\"38.53125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.46875\" x2=\"7.0938\" y2=\"38.53125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"38.46875\" x2=\"9.0938\" y2=\"38.53125\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"38.46875\" x2=\"10.0938\" y2=\"38.53125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.46875\" x2=\"11.0938\" y2=\"38.53125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.46875\" x2=\"13.5938\" y2=\"38.53125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.46875\" x2=\"17.8438\" y2=\"38.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.53125\" x2=\"2.5938\" y2=\"38.59375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.53125\" x2=\"7.0938\" y2=\"38.59375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"38.53125\" x2=\"9.0938\" y2=\"38.59375\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"38.53125\" x2=\"10.0938\" y2=\"38.59375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.53125\" x2=\"11.0938\" y2=\"38.59375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.53125\" x2=\"13.5938\" y2=\"38.59375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.53125\" x2=\"17.8438\" y2=\"38.59375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.59375\" x2=\"2.5938\" y2=\"38.65625\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.59375\" x2=\"7.0938\" y2=\"38.65625\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"38.59375\" x2=\"9.0938\" y2=\"38.65625\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"38.59375\" x2=\"10.0938\" y2=\"38.65625\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.59375\" x2=\"11.0938\" y2=\"38.65625\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.59375\" x2=\"13.5938\" y2=\"38.65625\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.59375\" x2=\"17.8438\" y2=\"38.65625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.65625\" x2=\"2.5938\" y2=\"38.71875\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.65625\" x2=\"7.0938\" y2=\"38.71875\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"38.65625\" x2=\"9.0938\" y2=\"38.71875\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"38.65625\" x2=\"10.0938\" y2=\"38.71875\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.65625\" x2=\"11.0938\" y2=\"38.71875\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.65625\" x2=\"13.5938\" y2=\"38.71875\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.65625\" x2=\"17.8438\" y2=\"38.71875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.71875\" x2=\"2.5938\" y2=\"38.78125\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.71875\" x2=\"7.0938\" y2=\"38.78125\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"38.71875\" x2=\"9.0938\" y2=\"38.78125\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"38.71875\" x2=\"10.0938\" y2=\"38.78125\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.71875\" x2=\"11.0938\" y2=\"38.78125\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.71875\" x2=\"13.5938\" y2=\"38.78125\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.71875\" x2=\"17.8438\" y2=\"38.78125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.78125\" x2=\"2.5938\" y2=\"38.84375\" layer=\"25\"/>\n<rectangle x1=\"6.0938\" y1=\"38.78125\" x2=\"7.0938\" y2=\"38.84375\" layer=\"25\"/>\n<rectangle x1=\"8.5938\" y1=\"38.78125\" x2=\"9.0938\" y2=\"38.84375\" layer=\"25\"/>\n<rectangle x1=\"9.5938\" y1=\"38.78125\" x2=\"10.0938\" y2=\"38.84375\" layer=\"25\"/>\n<rectangle x1=\"10.5938\" y1=\"38.78125\" x2=\"11.0938\" y2=\"38.84375\" layer=\"25\"/>\n<rectangle x1=\"11.5938\" y1=\"38.78125\" x2=\"13.5938\" y2=\"38.84375\" layer=\"25\"/>\n<rectangle x1=\"17.0938\" y1=\"38.78125\" x2=\"17.8438\" y2=\"38.84375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.84375\" x2=\"17.8438\" y2=\"38.90625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.90625\" x2=\"17.8438\" y2=\"38.96875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"38.96875\" x2=\"17.8438\" y2=\"39.03125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"39.03125\" x2=\"17.8438\" y2=\"39.09375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"39.09375\" x2=\"17.8438\" y2=\"39.15625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"39.15625\" x2=\"17.8438\" y2=\"39.21875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"39.21875\" x2=\"17.8438\" y2=\"39.28125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"39.28125\" x2=\"17.8438\" y2=\"39.34375\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"39.34375\" x2=\"17.8438\" y2=\"39.40625\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"39.40625\" x2=\"17.8438\" y2=\"39.46875\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"39.46875\" x2=\"17.8438\" y2=\"39.53125\" layer=\"25\"/>\n<rectangle x1=\"1.8438\" y1=\"39.53125\" x2=\"17.8438\" y2=\"39.59375\" layer=\"25\"/>\n</plain>\n<libraries>\n<library name=\"SparkFun-Electromechanical\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"JOYSTICK_MINI\">\n<smd name=\"A\" x=\"-3.325\" y=\"1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"B\" x=\"3.325\" y=\"1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"C\" x=\"-3.325\" y=\"-1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"CTR\" x=\"-3.325\" y=\"0\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"D\" x=\"3.325\" y=\"-1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"GND\" x=\"3.325\" y=\"0\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"NC\" x=\"0\" y=\"4.13\" dx=\"1.9\" dy=\"2\" layer=\"1\"/>\n<smd name=\"NC@0\" x=\"0\" y=\"-4.13\" dx=\"1.9\" dy=\"2\" layer=\"1\"/>\n<text x=\"-2.5\" y=\"3.8\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-2.5\" y=\"-4.2\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<hole x=\"0\" y=\"1.9\" drill=\"0.75\"/>\n<hole x=\"0\" y=\"-1.9\" drill=\"1.05\"/>\n<wire x1=\"2.65\" y1=\"-3.5\" x2=\"-2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.65\" y1=\"-3.5\" x2=\"-3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.65\" y1=\"-2.5\" x2=\"-3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.65\" y1=\"2.5\" x2=\"-2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.65\" y1=\"3.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"3.5\" x2=\"2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.65\" y1=\"3.5\" x2=\"3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.65\" y1=\"2.5\" x2=\"3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.65\" y1=\"-2.5\" x2=\"2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.046446875\" y1=\"-0.353553125\" x2=\"-0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.353553125\" y1=\"-1.046446875\" x2=\"0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"0.353553125\" y1=\"-1.046446875\" x2=\"1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.046446875\" y1=\"-0.353553125\" x2=\"1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"1.046446875\" y1=\"0.353553125\" x2=\"0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.353553125\" y1=\"1.046446875\" x2=\"-0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"-0.353553125\" y1=\"1.046446875\" x2=\"-1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.046446875\" y1=\"0.353553125\" x2=\"-1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.3\" y1=\"1.3\" x2=\"-2.2\" y2=\"2.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-1.6\" y2=\"2.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-2.2\" y2=\"1.6\" width=\"0.2032\" layer=\"21\"/>\n<text x=\"-2.9\" y=\"1.9\" size=\"0.8128\" layer=\"21\" ratio=\"20\" rot=\"SR45\">UP</text>\n<wire x1=\"-1\" y1=\"3.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.65\" y1=\"-3.5\" x2=\"-2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.65\" y1=\"-3.5\" x2=\"-3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.65\" y1=\"-2.5\" x2=\"-3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.65\" y1=\"2.5\" x2=\"-2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.65\" y1=\"3.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"1\" y1=\"3.5\" x2=\"2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2.65\" y1=\"3.5\" x2=\"3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3.65\" y1=\"2.5\" x2=\"3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3.65\" y1=\"-2.5\" x2=\"2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.046446875\" y1=\"-0.353553125\" x2=\"-0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-0.353553125\" y1=\"-1.046446875\" x2=\"0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"0.353553125\" y1=\"-1.046446875\" x2=\"1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"1.046446875\" y1=\"-0.353553125\" x2=\"1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.046446875\" y1=\"0.353553125\" x2=\"0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0.353553125\" y1=\"1.046446875\" x2=\"-0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-0.353553125\" y1=\"1.046446875\" x2=\"-1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.046446875\" y1=\"0.353553125\" x2=\"-1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.3\" y1=\"1.3\" x2=\"-2.2\" y2=\"2.2\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-1.6\" y2=\"2.2\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-2.2\" y2=\"1.6\" width=\"0.2032\" layer=\"51\"/>\n<text x=\"-2.9\" y=\"1.9\" size=\"0.8128\" layer=\"51\" ratio=\"20\" rot=\"SR45\">UP</text>\n<wire x1=\"-1\" y1=\"3.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n</package>\n<package name=\"SWITCH-SPST-SMD-A\">\n<wire x1=\"-3.35\" y1=\"1.3\" x2=\"-3.35\" y2=\"-1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.35\" y1=\"-1.3\" x2=\"3.35\" y2=\"-1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.35\" y1=\"-1.3\" x2=\"3.35\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.35\" y1=\"1.3\" x2=\"-0.1\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"1.3\" x2=\"-1.4\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"1.3\" x2=\"-3.35\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"1.3\" x2=\"-0.1\" y2=\"2.8\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"2.8\" x2=\"-1.4\" y2=\"2.8\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"2.8\" x2=\"-1.4\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.35\" y1=\"0.3\" x2=\"-3.35\" y2=\"-0.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.35\" y1=\"0.3\" x2=\"3.35\" y2=\"-0.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.7\" y1=\"1.3\" x2=\"-2.7\" y2=\"1.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.5\" y1=\"-1.3\" x2=\"0\" y2=\"-1.3\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-2.25\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"-0.75\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"2.25\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"GND1\" x=\"-3.65\" y=\"1\" dx=\"1\" dy=\"0.6\" layer=\"1\"/>\n<smd name=\"GND2\" x=\"-3.65\" y=\"-1.1\" dx=\"1\" dy=\"0.8\" layer=\"1\"/>\n<smd name=\"GND3\" x=\"3.65\" y=\"1\" dx=\"1\" dy=\"0.6\" layer=\"1\"/>\n<smd name=\"GND4\" x=\"3.65\" y=\"-1.1\" dx=\"1\" dy=\"0.8\" layer=\"1\"/>\n<text x=\"-1.27\" y=\"0.635\" size=\"0.6096\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"-1.27\" size=\"0.6096\" layer=\"27\">&gt;Value</text>\n<hole x=\"-1.5\" y=\"0\" drill=\"0.9\"/>\n<hole x=\"1.5\" y=\"0\" drill=\"0.9\"/>\n</package>\n</packages>\n</library>\n<library name=\"microbuilder\">\n<packages>\n<package name=\"EVQ-Q2_SMALLER\">\n<wire x1=\"-3.3\" y1=\"3\" x2=\"3.3\" y2=\"3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"3\" x2=\"3.3\" y2=\"-3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"-3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.3\" y1=\"-1.2\" x2=\"-3.3\" y2=\"1.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"1.2\" x2=\"3.3\" y2=\"-1.2\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5033\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"B\" x=\"-3.1\" y=\"2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"B'\" x=\"3.1\" y=\"2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A'\" x=\"3.1\" y=\"-2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A\" x=\"-3.1\" y=\"-2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-3.175\" y=\"3.5\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-3.175\" y=\"-3.683\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-RF\">\n<description>&lt;h3&gt;SparkFun RF, WiFi, Cellular, and Bluetooth&lt;/h3&gt;\nIn this library you'll find things that send or receive RF-- cellular modules, Bluetooth, WiFi, etc.\n&lt;br&gt;\n&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. \n&lt;br&gt;\n&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=\" www.sparkfun.com\"&gt;SparkFun.com&lt;/a&gt;.\n&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;\n&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"ESP-WROOM-32\">\n<wire x1=\"-10.3\" y1=\"-9\" x2=\"-10.3\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"-10.3\" y1=\"9\" x2=\"9.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"9\" x2=\"15.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"15.2\" y1=\"9\" x2=\"15.2\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"15.2\" y1=\"-9\" x2=\"9.2\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"-9\" x2=\"-10.3\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"-9\" x2=\"9.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<text x=\"12.2\" y=\"0\" size=\"1.27\" layer=\"51\" rot=\"R270\" align=\"center\">Keepout Zone</text>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"8.15\" y=\"9\"/>\n<vertex x=\"8\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"7.925\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"7.475\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"7.4\" y=\"9\"/>\n<vertex x=\"7.25\" y=\"9\"/>\n<vertex x=\"7.25\" y=\"8.55\"/>\n<vertex x=\"8.15\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"9\"/>\n<vertex x=\"6.73\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"6.655\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"6.205\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"6.13\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"8.55\"/>\n<vertex x=\"6.88\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"9\"/>\n<vertex x=\"5.46\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"5.385\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"4.935\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"4.86\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"8.55\"/>\n<vertex x=\"5.61\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"9\"/>\n<vertex x=\"4.19\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"4.115\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"3.665\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"3.59\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"8.55\"/>\n<vertex x=\"4.34\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"9\"/>\n<vertex x=\"2.92\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"2.845\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"2.395\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"2.32\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"8.55\"/>\n<vertex x=\"3.07\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"9\"/>\n<vertex x=\"1.65\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"1.575\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"1.125\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"1.05\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"8.55\"/>\n<vertex x=\"1.8\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"9\"/>\n<vertex x=\"0.38\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"0.305\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-0.145\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-0.22\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"8.55\"/>\n<vertex x=\"0.53\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"9\"/>\n<vertex x=\"-0.89\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-0.965\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-1.415\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-1.49\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"8.55\"/>\n<vertex x=\"-0.74\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"9\"/>\n<vertex x=\"-2.16\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-2.235\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-2.685\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-2.76\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"8.55\"/>\n<vertex x=\"-2.01\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"9\"/>\n<vertex x=\"-3.43\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-3.505\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-3.955\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-4.03\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"8.55\"/>\n<vertex x=\"-3.28\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"9\"/>\n<vertex x=\"-4.7\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-4.775\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-5.225\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-5.3\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"8.55\"/>\n<vertex x=\"-4.55\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"9\"/>\n<vertex x=\"-5.97\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-6.045\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-6.495\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-6.57\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"8.55\"/>\n<vertex x=\"-5.82\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"9\"/>\n<vertex x=\"-7.24\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-7.315\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-7.765\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-7.84\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"8.55\"/>\n<vertex x=\"-7.09\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"9\"/>\n<vertex x=\"-8.51\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-8.585\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-9.035\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-9.11\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"8.55\"/>\n<vertex x=\"-8.36\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"8.15\" y=\"-9\"/>\n<vertex x=\"8\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"7.925\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"7.475\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"7.4\" y=\"-9\"/>\n<vertex x=\"7.25\" y=\"-9\"/>\n<vertex x=\"7.25\" y=\"-8.55\"/>\n<vertex x=\"8.15\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"-9\"/>\n<vertex x=\"6.73\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"6.655\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"6.205\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"6.13\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-8.55\"/>\n<vertex x=\"6.88\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"-9\"/>\n<vertex x=\"5.46\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"5.385\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"4.935\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"4.86\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-8.55\"/>\n<vertex x=\"5.61\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"-9\"/>\n<vertex x=\"4.19\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"4.115\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"3.665\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"3.59\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-8.55\"/>\n<vertex x=\"4.34\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"-9\"/>\n<vertex x=\"2.92\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"2.845\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"2.395\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"2.32\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-8.55\"/>\n<vertex x=\"3.07\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"-9\"/>\n<vertex x=\"1.65\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"1.575\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"1.125\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"1.05\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-8.55\"/>\n<vertex x=\"1.8\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"-9\"/>\n<vertex x=\"0.38\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"0.305\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-0.145\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-0.22\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-8.55\"/>\n<vertex x=\"0.53\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"-9\"/>\n<vertex x=\"-0.89\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-0.965\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-1.415\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-1.49\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-8.55\"/>\n<vertex x=\"-0.74\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"-9\"/>\n<vertex x=\"-2.16\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-2.235\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-2.685\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-2.76\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-8.55\"/>\n<vertex x=\"-2.01\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"-9\"/>\n<vertex x=\"-3.43\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-3.505\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-3.955\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-4.03\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-8.55\"/>\n<vertex x=\"-3.28\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"-9\"/>\n<vertex x=\"-4.7\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-4.775\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-5.225\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-5.3\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-8.55\"/>\n<vertex x=\"-4.55\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"-9\"/>\n<vertex x=\"-5.97\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-6.045\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-6.495\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-6.57\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-8.55\"/>\n<vertex x=\"-5.82\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"-9\"/>\n<vertex x=\"-7.24\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-7.315\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-7.765\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-7.84\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-8.55\"/>\n<vertex x=\"-7.09\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"-9\"/>\n<vertex x=\"-8.51\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-8.585\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-9.035\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-9.11\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-8.55\"/>\n<vertex x=\"-8.36\" y=\"-8.55\"/>\n</polygon>\n<smd name=\"1\" x=\"7.7\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"2\" x=\"6.43\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"3\" x=\"5.16\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"4\" x=\"3.89\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"5\" x=\"2.62\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"6\" x=\"1.35\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"7\" x=\"0.08\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"8\" x=\"-1.19\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"9\" x=\"-2.46\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"10\" x=\"-3.73\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"11\" x=\"-5\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"12\" x=\"-6.27\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"13\" x=\"-7.54\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"14\" x=\"-8.81\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"1.085\"/>\n<vertex x=\"-10.3\" y=\"0.935\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"0.86\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"0.41\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"0.335\"/>\n<vertex x=\"-10.3\" y=\"0.185\"/>\n<vertex x=\"-9.85\" y=\"0.185\"/>\n<vertex x=\"-9.85\" y=\"1.085\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-0.185\"/>\n<vertex x=\"-10.3\" y=\"-0.335\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-0.41\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-0.86\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-0.935\"/>\n<vertex x=\"-10.3\" y=\"-1.085\"/>\n<vertex x=\"-9.85\" y=\"-1.085\"/>\n<vertex x=\"-9.85\" y=\"-0.185\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"2.355\"/>\n<vertex x=\"-10.3\" y=\"2.205\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"2.13\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"1.68\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"1.605\"/>\n<vertex x=\"-10.3\" y=\"1.455\"/>\n<vertex x=\"-9.85\" y=\"1.455\"/>\n<vertex x=\"-9.85\" y=\"2.355\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"3.625\"/>\n<vertex x=\"-10.3\" y=\"3.475\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"3.4\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"2.95\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"2.875\"/>\n<vertex x=\"-10.3\" y=\"2.725\"/>\n<vertex x=\"-9.85\" y=\"2.725\"/>\n<vertex x=\"-9.85\" y=\"3.625\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"4.895\"/>\n<vertex x=\"-10.3\" y=\"4.745\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"4.67\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"4.22\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"4.145\"/>\n<vertex x=\"-10.3\" y=\"3.995\"/>\n<vertex x=\"-9.85\" y=\"3.995\"/>\n<vertex x=\"-9.85\" y=\"4.895\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"6.165\"/>\n<vertex x=\"-10.3\" y=\"6.015\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"5.94\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"5.49\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"5.415\"/>\n<vertex x=\"-10.3\" y=\"5.265\"/>\n<vertex x=\"-9.85\" y=\"5.265\"/>\n<vertex x=\"-9.85\" y=\"6.165\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-1.455\"/>\n<vertex x=\"-10.3\" y=\"-1.605\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-1.68\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-2.13\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-2.205\"/>\n<vertex x=\"-10.3\" y=\"-2.355\"/>\n<vertex x=\"-9.85\" y=\"-2.355\"/>\n<vertex x=\"-9.85\" y=\"-1.455\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-2.725\"/>\n<vertex x=\"-10.3\" y=\"-2.875\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-2.95\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-3.4\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-3.475\"/>\n<vertex x=\"-10.3\" y=\"-3.625\"/>\n<vertex x=\"-9.85\" y=\"-3.625\"/>\n<vertex x=\"-9.85\" y=\"-2.725\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-3.995\"/>\n<vertex x=\"-10.3\" y=\"-4.145\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-4.22\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-4.67\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-4.745\"/>\n<vertex x=\"-10.3\" y=\"-4.895\"/>\n<vertex x=\"-9.85\" y=\"-4.895\"/>\n<vertex x=\"-9.85\" y=\"-3.995\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-5.265\"/>\n<vertex x=\"-10.3\" y=\"-5.415\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-5.49\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-5.94\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-6.015\"/>\n<vertex x=\"-10.3\" y=\"-6.165\"/>\n<vertex x=\"-9.85\" y=\"-6.165\"/>\n<vertex x=\"-9.85\" y=\"-5.265\"/>\n</polygon>\n<smd name=\"15\" x=\"-10.3\" y=\"5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"16\" x=\"-10.3\" y=\"4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"17\" x=\"-10.3\" y=\"3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"18\" x=\"-10.3\" y=\"1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"19\" x=\"-10.3\" y=\"0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"20\" x=\"-10.3\" y=\"-0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"21\" x=\"-10.3\" y=\"-1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"22\" x=\"-10.3\" y=\"-3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"23\" x=\"-10.3\" y=\"-4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"24\" x=\"-10.3\" y=\"-5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"25\" x=\"-8.81\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"26\" x=\"-7.54\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"27\" x=\"-6.27\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"28\" x=\"-5\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"29\" x=\"-3.73\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"30\" x=\"-2.46\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"31\" x=\"-1.19\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"32\" x=\"0.08\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"33\" x=\"1.35\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"34\" x=\"2.62\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"35\" x=\"3.89\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"36\" x=\"5.16\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"37\" x=\"6.43\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"38\" x=\"7.7\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"GND\" x=\"0\" y=\"0\" dx=\"6\" dy=\"6\" layer=\"1\"/>\n<wire x1=\"-10.427\" y1=\"6.35\" x2=\"-10.427\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"9.127\" x2=\"-9.4\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"-6.35\" x2=\"-10.427\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"-9.127\" x2=\"-9.4\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<text x=\"-7.76\" y=\"0\" size=\"0.8128\" layer=\"25\" rot=\"R90\" align=\"center\">&gt;Name</text>\n<text x=\"-6.49\" y=\"0\" size=\"0.8128\" layer=\"27\" rot=\"R90\" align=\"center\">&gt;Value</text>\n<wire x1=\"8.311\" y1=\"9.127\" x2=\"15.327\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.311\" y1=\"-9.127\" x2=\"15.327\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"15.327\" y1=\"9.127\" x2=\"15.327\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-Resistors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"0603\">\n<description>&lt;p&gt;&lt;b&gt;Generic 1608 (0603) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"0\" y=\"0.762\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.762\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-Capacitors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"0603\">\n<description>&lt;p&gt;&lt;b&gt;Generic 1608 (0603) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"0\" y=\"0.762\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.762\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n<package name=\"0603-CAP\">\n<wire x1=\"-1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"0.027940625\" x2=\"0\" y2=\"-0.027940625\" width=\"0.381\" layer=\"21\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"0.762\" size=\"0.4064\" layer=\"25\" font=\"vector\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-1.143\" size=\"0.4064\" layer=\"27\" font=\"vector\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n<package name=\"0805\">\n<description>&lt;p&gt;&lt;b&gt;Generic 2012 (0805) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<smd name=\"1\" x=\"-0.9\" y=\"0\" dx=\"0.8\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.9\" y=\"0\" dx=\"0.8\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"0\" y=\"0.889\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.889\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<wire x1=\"-1.5\" y1=\"0.8\" x2=\"1.5\" y2=\"0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.5\" y1=\"0.8\" x2=\"1.5\" y2=\"-0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.5\" y1=\"-0.8\" x2=\"-1.5\" y2=\"-0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.5\" y1=\"-0.8\" x2=\"-1.5\" y2=\"0.8\" width=\"0.0508\" layer=\"39\"/>\n</package>\n</packages>\n</library>\n<library name=\"esp32-thing-temp\">\n<packages>\n<package name=\"SC70-6\">\n<description>&lt;h3&gt;SC-88/SC70-6/SOT-363 6-pin Package&lt;/h3&gt;\n&lt;p&gt;&lt;a href=\"http://www.onsemi.com/pub_link/Collateral/MBT3904DW1T1-D.PDF\"&gt;Example Datasheet&lt;/a&gt;&lt;/p&gt;</description>\n<circle x=\"-1.3335\" y=\"-1.016\" radius=\"0.254\" width=\"0\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"0.625\" x2=\"-1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"0.625\" x2=\"-1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1\" y1=\"-0.625\" x2=\"1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.1176\" y1=\"0.7493\" x2=\"-1.1176\" y2=\"-0.6223\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.1176\" y1=\"-0.7493\" x2=\"1.1176\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.9779\" y1=\"0.7493\" x2=\"-1.1176\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.1176\" y1=\"0.7493\" x2=\"0.9779\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.1176\" y1=\"-0.6223\" x2=\"-0.9779\" y2=\"-0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.9779\" y1=\"-0.7493\" x2=\"1.1176\" y2=\"-0.7493\" width=\"0.2032\" layer=\"21\"/>\n<rectangle x1=\"-0.1016\" y1=\"0.6858\" x2=\"0.1016\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.1016\" y1=\"-1.0414\" x2=\"0.1016\" y2=\"-0.6858\" layer=\"51\"/>\n<rectangle x1=\"0.5484\" y1=\"0.6858\" x2=\"0.7516\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.7516\" y1=\"0.6858\" x2=\"-0.5484\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.7516\" y1=\"-1.0414\" x2=\"-0.5484\" y2=\"-0.6858\" layer=\"51\"/>\n<rectangle x1=\"0.5484\" y1=\"-1.0414\" x2=\"0.7516\" y2=\"-0.6858\" layer=\"51\"/>\n<smd name=\"4\" x=\"0.65\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<smd name=\"2\" x=\"0\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"1\" x=\"-0.65\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"0.65\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"5\" x=\"0\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<smd name=\"6\" x=\"-0.65\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<text x=\"0\" y=\"1.397\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.397\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-PowerIC\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find drivers, regulators, and amplifiers.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SOT23-5\">\n<description>&lt;b&gt;Small Outline Transistor&lt;/b&gt;</description>\n<wire x1=\"1.27\" y1=\"0.4294\" x2=\"1.27\" y2=\"-0.4294\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"-0.8\" x2=\"-1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.27\" y1=\"-0.4294\" x2=\"-1.27\" y2=\"0.4294\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.4\" y1=\"0.8\" x2=\"1.4\" y2=\"0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.2684\" y1=\"0.7088\" x2=\"0.2684\" y2=\"0.7088\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"0.8\" x2=\"1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"0.8\" x2=\"-1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<rectangle x1=\"-1.2\" y1=\"-1.5\" x2=\"-0.7\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"-0.25\" y1=\"-1.5\" x2=\"0.25\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"0.7\" y1=\"-1.5\" x2=\"1.2\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"0.7\" y1=\"0.85\" x2=\"1.2\" y2=\"1.5\" layer=\"51\"/>\n<rectangle x1=\"-1.2\" y1=\"0.85\" x2=\"-0.7\" y2=\"1.5\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.95\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"0\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"3\" x=\"0.95\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"4\" x=\"0.95\" y=\"1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"5\" x=\"-0.95\" y=\"1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"2.159\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-0.9525\" y=\"-0.1905\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<circle x=\"-1.6002\" y=\"-1.016\" radius=\"0.127\" width=\"0\" layer=\"21\"/>\n</package>\n<package name=\"PTC-1206\">\n<wire x1=\"-1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.635\" y1=\"-0.762\" x2=\"-0.635\" y2=\"-0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.635\" y1=\"0.762\" x2=\"0.635\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.143\" y1=\"-1.016\" x2=\"0.254\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.254\" y1=\"1.016\" x2=\"1.143\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.4\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<smd name=\"2\" x=\"1.4\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<text x=\"-1.524\" y=\"1.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.524\" y=\"-1.651\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-Connectors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"JST-2-PTH\">\n<pad name=\"1\" x=\"-1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<pad name=\"2\" x=\"1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<text x=\"-1.27\" y=\"5.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"4\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<text x=\"0.6\" y=\"0.7\" size=\"1.27\" layer=\"51\">+</text>\n<text x=\"-1.4\" y=\"0.7\" size=\"1.27\" layer=\"51\">-</text>\n<wire x1=\"-2.95\" y1=\"-1.6\" x2=\"-2.95\" y2=\"6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.95\" y1=\"6\" x2=\"2.95\" y2=\"6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"6\" x2=\"2.95\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.95\" y1=\"-1.6\" x2=\"-2.3\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"-1.6\" x2=\"2.3\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.3\" y1=\"-1.6\" x2=\"-2.3\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.3\" y1=\"-1.6\" x2=\"2.3\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n</package>\n<package name=\"USB-C-16P\">\n<smd name=\"B6\" x=\"0.75\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"A7\" x=\"0.25\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"GND2\" x=\"3.225\" y=\"0\" dx=\"0.6\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"VBUS2\" x=\"2.45\" y=\"0\" dx=\"0.55\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"B5\" x=\"1.75\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"A8\" x=\"1.25\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"B7\" x=\"-0.75\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"A6\" x=\"-0.25\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"GND\" x=\"-3.225\" y=\"0\" dx=\"0.6\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"VBUS1\" x=\"-2.45\" y=\"0\" dx=\"0.55\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"B8\" x=\"-1.75\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"A5\" x=\"-1.25\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<hole x=\"-2.89\" y=\"-1.445\" drill=\"0.65\"/>\n<hole x=\"2.89\" y=\"-1.445\" drill=\"0.65\"/>\n<wire x1=\"-4.62\" y1=\"-5.4\" x2=\"-4.62\" y2=\"-4.78\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"-4.02\" y1=\"-5.4\" x2=\"-4.02\" y2=\"-4.78\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"-4.62\" y1=\"-4.78\" x2=\"-4.02\" y2=\"-4.78\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"-4.02\" y1=\"-5.4\" x2=\"-4.62\" y2=\"-5.4\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"-4.32\" y1=\"-4.295\" x2=\"-4.32\" y2=\"-5.895\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.82\" y1=\"-5.095\" x2=\"-3.82\" y2=\"-5.095\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.62\" y1=\"-5.095\" x2=\"-4.02\" y2=\"-5.095\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"-4.32\" y1=\"-4.495\" x2=\"-4.32\" y2=\"-5.695\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"-4.82\" y1=\"-5.395\" x2=\"-3.82\" y2=\"-5.395\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.82\" y1=\"-4.795\" x2=\"-3.82\" y2=\"-4.795\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.62\" y1=\"-1.465\" x2=\"-4.62\" y2=\"-0.365\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"-4.02\" y1=\"-1.465\" x2=\"-4.02\" y2=\"-0.365\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"-4.02\" y1=\"-1.465\" x2=\"-4.62\" y2=\"-1.465\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"-4.82\" y1=\"-0.915\" x2=\"-3.82\" y2=\"-0.915\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.62\" y1=\"-0.915\" x2=\"-4.02\" y2=\"-0.915\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"-4.82\" y1=\"-1.515\" x2=\"-3.82\" y2=\"-1.515\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.82\" y1=\"-0.315\" x2=\"-3.82\" y2=\"-0.315\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.62\" y1=\"-0.365\" x2=\"-4.02\" y2=\"-0.365\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"4.32\" y1=\"-0.065\" x2=\"4.32\" y2=\"-1.765\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"4.02\" y1=\"-5.4\" x2=\"4.02\" y2=\"-4.78\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"4.62\" y1=\"-5.4\" x2=\"4.62\" y2=\"-4.78\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"4.02\" y1=\"-4.78\" x2=\"4.62\" y2=\"-4.78\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"4.62\" y1=\"-5.4\" x2=\"4.02\" y2=\"-5.4\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"4.32\" y1=\"-4.295\" x2=\"4.32\" y2=\"-5.895\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"3.82\" y1=\"-5.095\" x2=\"4.82\" y2=\"-5.095\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"4.02\" y1=\"-5.095\" x2=\"4.62\" y2=\"-5.095\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"4.32\" y1=\"-4.495\" x2=\"4.32\" y2=\"-5.695\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"3.82\" y1=\"-5.395\" x2=\"4.82\" y2=\"-5.395\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"3.82\" y1=\"-4.795\" x2=\"4.82\" y2=\"-4.795\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"4.02\" y1=\"-1.465\" x2=\"4.02\" y2=\"-0.365\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"4.62\" y1=\"-1.465\" x2=\"4.62\" y2=\"-0.365\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"4.62\" y1=\"-1.465\" x2=\"4.02\" y2=\"-1.465\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"3.82\" y1=\"-0.915\" x2=\"4.82\" y2=\"-0.915\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"4.02\" y1=\"-0.915\" x2=\"4.62\" y2=\"-0.915\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"3.82\" y1=\"-1.515\" x2=\"4.82\" y2=\"-1.515\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"3.82\" y1=\"-0.315\" x2=\"4.82\" y2=\"-0.315\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"4.02\" y1=\"-0.365\" x2=\"4.62\" y2=\"-0.365\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"-4.32\" y1=\"0.135\" x2=\"-4.32\" y2=\"0.125\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"0.125\" x2=\"-4.32\" y2=\"-1.965\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"-0.065\" x2=\"-4.32\" y2=\"-1.765\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"4.32\" y1=\"0.135\" x2=\"4.32\" y2=\"0.125\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"4.32\" y1=\"0.125\" x2=\"4.32\" y2=\"-1.965\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"-7.695\" x2=\"4.32\" y2=\"-7.695\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"-7.695\" x2=\"-4.32\" y2=\"0.125\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"0.125\" x2=\"4.32\" y2=\"0.125\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"4.32\" y1=\"0.125\" x2=\"4.32\" y2=\"-7.695\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"-7.7\" x2=\"4.32\" y2=\"-7.7\" width=\"0.1524\" layer=\"51\" curve=\"-21.282614\"/>\n<wire x1=\"-4.32\" y1=\"-2.2\" x2=\"-4.32\" y2=\"-4\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"4.32\" y1=\"-2.2\" x2=\"4.32\" y2=\"-4\" width=\"0.1524\" layer=\"21\"/>\n<polygon width=\"0.01\" layer=\"29\">\n<vertex x=\"-4.92\" y=\"-1.52\"/>\n<vertex x=\"-4.92\" y=\"-0.32\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"0.235\" curve=\"-90\"/>\n<vertex x=\"-3.72\" y=\"-0.32\"/>\n<vertex x=\"-3.72\" y=\"-1.52\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-2.065\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"31\">\n<vertex x=\"-4.92\" y=\"-1.52\"/>\n<vertex x=\"-4.92\" y=\"-0.32\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"0.235\" curve=\"-90\"/>\n<vertex x=\"-3.72\" y=\"-0.32\"/>\n<vertex x=\"-3.72\" y=\"-1.52\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-2.065\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"29\">\n<vertex x=\"3.72\" y=\"-1.52\"/>\n<vertex x=\"3.72\" y=\"-0.32\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"0.235\" curve=\"-90\"/>\n<vertex x=\"4.92\" y=\"-0.32\"/>\n<vertex x=\"4.92\" y=\"-1.52\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-2.065\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"29\">\n<vertex x=\"3.72\" y=\"-5.4\"/>\n<vertex x=\"3.72\" y=\"-4.8\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-4.195\" curve=\"-90\"/>\n<vertex x=\"4.92\" y=\"-4.8\"/>\n<vertex x=\"4.92\" y=\"-5.4\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-5.995\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"29\">\n<vertex x=\"-4.92\" y=\"-5.4\"/>\n<vertex x=\"-4.92\" y=\"-4.8\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-4.195\" curve=\"-90\"/>\n<vertex x=\"-3.72\" y=\"-4.8\"/>\n<vertex x=\"-3.72\" y=\"-5.4\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-5.995\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"31\">\n<vertex x=\"3.72\" y=\"-1.52\"/>\n<vertex x=\"3.72\" y=\"-0.32\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"0.235\" curve=\"-90\"/>\n<vertex x=\"4.92\" y=\"-0.32\"/>\n<vertex x=\"4.92\" y=\"-1.52\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-2.065\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"31\">\n<vertex x=\"3.72\" y=\"-5.4\"/>\n<vertex x=\"3.72\" y=\"-4.8\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-4.195\" curve=\"-90\"/>\n<vertex x=\"4.92\" y=\"-4.8\"/>\n<vertex x=\"4.92\" y=\"-5.4\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-5.995\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"31\">\n<vertex x=\"-4.92\" y=\"-5.4\"/>\n<vertex x=\"-4.92\" y=\"-4.8\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-4.195\" curve=\"-90\"/>\n<vertex x=\"-3.72\" y=\"-4.8\"/>\n<vertex x=\"-3.72\" y=\"-5.4\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-5.995\" curve=\"-90\"/>\n</polygon>\n<text x=\"0\" y=\"-2.54\" size=\"0.762\" layer=\"25\" align=\"center\">&gt;Name</text>\n<text x=\"0\" y=\"-3.81\" size=\"0.762\" layer=\"27\" align=\"center\">&gt;Value</text>\n<smd name=\"SHLD1\" x=\"-4.32\" y=\"-0.915\" dx=\"1\" dy=\"2.1\" layer=\"1\" roundness=\"100\" rot=\"R180\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD2\" x=\"4.32\" y=\"-0.915\" dx=\"1\" dy=\"2.1\" layer=\"1\" roundness=\"100\" rot=\"R180\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD3\" x=\"-4.32\" y=\"-0.915\" dx=\"1\" dy=\"2.1\" layer=\"16\" roundness=\"100\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD4\" x=\"4.32\" y=\"-0.915\" dx=\"1\" dy=\"2.1\" layer=\"16\" roundness=\"100\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD5\" x=\"-4.32\" y=\"-5.095\" dx=\"1\" dy=\"1.6\" layer=\"1\" roundness=\"100\" rot=\"R180\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD6\" x=\"-4.32\" y=\"-5.095\" dx=\"1\" dy=\"1.6\" layer=\"16\" roundness=\"100\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD7\" x=\"4.32\" y=\"-5.095\" dx=\"1\" dy=\"1.6\" layer=\"16\" roundness=\"100\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD8\" x=\"4.32\" y=\"-5.095\" dx=\"1\" dy=\"1.6\" layer=\"1\" roundness=\"100\" rot=\"R180\" stop=\"no\" cream=\"no\"/>\n<polygon width=\"0.0254\" layer=\"2\" pour=\"cutout\">\n<vertex x=\"-4.8\" y=\"0.1\"/>\n<vertex x=\"-3.8\" y=\"0.1\"/>\n<vertex x=\"-3.8\" y=\"-2\"/>\n<vertex x=\"-4.8\" y=\"-2\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"2\" pour=\"cutout\">\n<vertex x=\"-4.8\" y=\"-4.3\"/>\n<vertex x=\"-3.8\" y=\"-4.3\"/>\n<vertex x=\"-3.8\" y=\"-5.9\"/>\n<vertex x=\"-4.8\" y=\"-5.9\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"2\" pour=\"cutout\">\n<vertex x=\"3.8\" y=\"0.1\"/>\n<vertex x=\"4.8\" y=\"0.1\"/>\n<vertex x=\"4.8\" y=\"-1.9\"/>\n<vertex x=\"4.8\" y=\"-2\"/>\n<vertex x=\"3.8\" y=\"-2\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"2\" pour=\"cutout\">\n<vertex x=\"3.8\" y=\"-4.3\"/>\n<vertex x=\"4.8\" y=\"-4.3\"/>\n<vertex x=\"4.8\" y=\"-5.9\"/>\n<vertex x=\"3.8\" y=\"-5.9\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"15\" pour=\"cutout\">\n<vertex x=\"-4.8\" y=\"0.1\"/>\n<vertex x=\"-3.8\" y=\"0.1\"/>\n<vertex x=\"-3.8\" y=\"-2\"/>\n<vertex x=\"-4.8\" y=\"-2\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"15\" pour=\"cutout\">\n<vertex x=\"-4.8\" y=\"-4.3\"/>\n<vertex x=\"-3.8\" y=\"-4.3\"/>\n<vertex x=\"-3.8\" y=\"-5.9\"/>\n<vertex x=\"-4.8\" y=\"-5.9\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"15\" pour=\"cutout\">\n<vertex x=\"3.8\" y=\"0.1\"/>\n<vertex x=\"4.8\" y=\"0.1\"/>\n<vertex x=\"4.8\" y=\"-2\"/>\n<vertex x=\"3.8\" y=\"-2\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"15\" pour=\"cutout\">\n<vertex x=\"3.8\" y=\"-4.3\"/>\n<vertex x=\"4.8\" y=\"-4.3\"/>\n<vertex x=\"4.8\" y=\"-5.9\"/>\n<vertex x=\"3.8\" y=\"-5.9\"/>\n</polygon>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-DigitalIC\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find all manner of digital ICs- microcontrollers, memory chips, logic chips, FPGAs, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SSOP20_L\">\n<description>Longer version of SSOP-20 Package</description>\n<wire x1=\"4.3307\" y1=\"-1.9558\" x2=\"4.3307\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"-3.81\" y=\"-2.54\" radius=\"0.254\" width=\"0\" layer=\"21\"/>\n<text x=\"0\" y=\"0\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<smd name=\"16\" x=\"-0.3175\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"15\" x=\"0.3175\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"14\" x=\"0.9525\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"13\" x=\"1.5875\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"12\" x=\"2.2225\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"11\" x=\"2.8575\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"17\" x=\"-0.9525\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"18\" x=\"-1.5875\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"19\" x=\"-2.2225\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"20\" x=\"-2.8575\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"6\" x=\"0.3175\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"5\" x=\"-0.3175\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"4\" x=\"-0.9525\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"-1.5875\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"-2.2225\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"1\" x=\"-2.8575\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"7\" x=\"0.9525\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"8\" x=\"1.5875\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"9\" x=\"2.2225\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"10\" x=\"2.8575\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<rectangle x1=\"0.1905\" y1=\"-2.9845\" x2=\"0.4445\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"0.8255\" y1=\"-2.9845\" x2=\"1.0795\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"1.4605\" y1=\"-2.9845\" x2=\"1.7145\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"2.0955\" y1=\"-2.9845\" x2=\"2.3495\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"2.7305\" y1=\"-2.9845\" x2=\"2.9845\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-0.4445\" y1=\"-2.9845\" x2=\"-0.1905\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-1.0795\" y1=\"-2.9845\" x2=\"-0.8255\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-1.7145\" y1=\"-2.9845\" x2=\"-1.4605\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-2.3495\" y1=\"-2.9845\" x2=\"-2.0955\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-2.9845\" y1=\"-2.9845\" x2=\"-2.7305\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-0.4445\" y1=\"2.3495\" x2=\"-0.1905\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-1.0795\" y1=\"2.3495\" x2=\"-0.8255\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-1.7145\" y1=\"2.3495\" x2=\"-1.4605\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-2.3495\" y1=\"2.3495\" x2=\"-2.0955\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-2.9845\" y1=\"2.3495\" x2=\"-2.7305\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"0.1905\" y1=\"2.3495\" x2=\"0.4445\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"0.8255\" y1=\"2.3495\" x2=\"1.0795\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"1.4605\" y1=\"2.3495\" x2=\"1.7145\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"2.0955\" y1=\"2.3495\" x2=\"2.3495\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"2.7305\" y1=\"2.3495\" x2=\"2.9845\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<wire x1=\"-4.3307\" y1=\"1.9558\" x2=\"-4.3307\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.3307\" y1=\"-1.9558\" x2=\"-3.2512\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2512\" y1=\"-1.9558\" x2=\"4.3307\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.3307\" y1=\"1.9558\" x2=\"-3.2512\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2512\" y1=\"1.9558\" x2=\"4.3307\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-DiscreteSemi\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SOD-323\">\n<wire x1=\"-0.9\" y1=\"0.65\" x2=\"-0.5\" y2=\"0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"0.65\" x2=\"0.9\" y2=\"0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.9\" y1=\"-0.65\" x2=\"-0.5\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"-0.65\" x2=\"0.9\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"0.65\" x2=\"-0.5\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"C\" x=\"-1.15\" y=\"0\" dx=\"0.63\" dy=\"0.83\" layer=\"1\"/>\n<smd name=\"A\" x=\"1.15\" y=\"0\" dx=\"0.63\" dy=\"0.83\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"1.016\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-1.397\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"SOT23-3\">\n<wire x1=\"1.4224\" y1=\"0.6604\" x2=\"1.4224\" y2=\"-0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.4224\" y1=\"-0.6604\" x2=\"-1.4224\" y2=\"-0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4224\" y1=\"-0.6604\" x2=\"-1.4224\" y2=\"0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4224\" y1=\"0.6604\" x2=\"1.4224\" y2=\"0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.8\" y1=\"0.7\" x2=\"-1.4\" y2=\"0.7\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.4\" y1=\"0.7\" x2=\"-1.4\" y2=\"-0.1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.8\" y1=\"0.7\" x2=\"1.4\" y2=\"0.7\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"0.7\" x2=\"1.4\" y2=\"-0.1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-0.95\" y=\"-1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.95\" y=\"-1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"3\" x=\"0\" y=\"1.1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<text x=\"-0.8255\" y=\"1.778\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-0.1905\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n</packages>\n</library>\n<library name=\"Eagle_FPC_CONNECTOR_AND_FFC_CAB_rev15c\">\n<description>&lt;BR&gt;Wurth Elektronik   FPC Connector and FFC Cable&lt;br&gt;&lt;Hr&gt;\n&lt;BR&gt;&lt;BR&gt; \n&lt;TABLE BORDER=0 CELLSPACING=0 CELLPADDING=0&gt;\n&lt;TR&gt;   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;&lt;br&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt; &lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------------------------&lt;BR&gt;\n&lt;B&gt;&lt;I&gt;&lt;span style='font-size:26pt;\n  color:#FF6600;'&gt;WE &lt;/span&gt;&lt;/i&gt;&lt;/b&gt;\n&lt;BR&gt;\n      ---------------------------&lt;BR&gt;&lt;b&gt;Würth Elektronik&lt;/b&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n\n  &lt;TR&gt;\n    &lt;TD COLSPAN=7&gt;&amp;nbsp;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n  \n&lt;/TABLE&gt;\n&lt;B&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;More than you expect&lt;BR&gt;&lt;BR&gt;&lt;BR&gt;&lt;/B&gt;\n\n&lt;HR&gt;&lt;BR&gt;\n&lt;b&gt;Würth Elektronik eiSos GmbH &amp; Co. KG&lt;/b&gt;&lt;br&gt;\nEMC &amp; Inductive Solutions&lt;br&gt;\n\nMax-Eyth-Str.1&lt;br&gt;\nD-74638 Waldenburg&lt;br&gt;\n&lt;br&gt;\nTel: +49 (0)7942-945-0&lt;br&gt;\nFax:+49 (0)7942-945-405&lt;br&gt;\n&lt;br&gt;\n&lt;a href=\"http://www.we-online.com/eagle\"&gt;http://www.we-online.com/eagle&lt;/a&gt;&lt;br&gt;\n&lt;a href=\"mailto:libraries@we-online.com\"&gt;libraries@we-online.com&lt;/a&gt; &lt;BR&gt;&lt;BR&gt;\n&lt;br&gt;&lt;HR&gt;&lt;BR&gt;\nNeither CadSoft nor WE-eiSos does warrant that this library is error-free or &lt;br&gt;\nthat it meets your specific requirements.&lt;br&gt;&lt;BR&gt;\nPlease contact us for more information.&lt;br&gt;&lt;BR&gt;&lt;br&gt;\n&lt;hr&gt;\nEagle Version 6, Library Revision 2015b, 08.04.2015&lt;br&gt;\n&lt;HR&gt;\nCopyright: Würth Elektronik</description>\n<packages>\n<package name=\"68711014522\">\n<description>&lt;b&gt;WR-FPC 0.5mm SMT ZIF Horizontal Bottom Contact, 10 Pins</description>\n<wire x1=\"5.8\" y1=\"-4.1\" x2=\"5.8\" y2=\"1.5\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.8\" y1=\"1.5\" x2=\"-5.8\" y2=\"-4.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.8\" y1=\"1.5\" x2=\"-5.8\" y2=\"1.5\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.8\" y1=\"-4.1\" x2=\"5.8\" y2=\"-4.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.7\" y1=\"0.2\" x2=\"5.7\" y2=\"0.2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-5.7\" y1=\"-4.1\" x2=\"5.7\" y2=\"-4.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"5.7\" y1=\"0.2\" x2=\"5.7\" y2=\"-4.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-5.7\" y1=\"-4.1\" x2=\"-5.7\" y2=\"0.2\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"Z2\" x=\"4.18\" y=\"-1.38\" dx=\"2.7\" dy=\"3\" layer=\"1\"/>\n<smd name=\"Z1\" x=\"-4.18\" y=\"-1.38\" dx=\"2.7\" dy=\"3\" layer=\"1\"/>\n<smd name=\"1\" x=\"-2.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"-1.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"3\" x=\"-1.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"4\" x=\"-0.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"5\" x=\"-0.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"6\" x=\"0.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"7\" x=\"0.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"8\" x=\"1.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"9\" x=\"1.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"10\" x=\"2.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-2.944\" y=\"2.1101\" size=\"1.27\" layer=\"25\">&gt;NAME</text>\n<text x=\"-2.8\" y=\"-1.5\" size=\"1.27\" layer=\"51\">1</text>\n<text x=\"-3.329\" y=\"-5.7066\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n</package>\n</packages>\n</library>\n<library name=\"Microchip_By_element14_Batch_1\">\n<description>Developed by element14 :&lt;br&gt;\nelement14 CAD Library consolidation.ulp\nat 30/07/2012 11:22:31</description>\n<packages>\n<package name=\"SOT95P270X145-6N\">\n<smd name=\"1\" x=\"-1.2954\" y=\"0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"2\" x=\"-1.2954\" y=\"0\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"3\" x=\"-1.2954\" y=\"-0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"4\" x=\"1.2954\" y=\"-0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"5\" x=\"1.2954\" y=\"0\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"6\" x=\"1.2954\" y=\"0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<wire x1=\"-0.889\" y1=\"0.6858\" x2=\"-0.889\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"1.1938\" x2=\"-1.6002\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"1.1938\" x2=\"-1.6002\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"0.6858\" x2=\"-0.889\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-0.254\" x2=\"-0.889\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"0.254\" x2=\"-1.6002\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"0.254\" x2=\"-1.6002\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-0.254\" x2=\"-0.889\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-1.1938\" x2=\"-0.889\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-0.6858\" x2=\"-1.6002\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-0.6858\" x2=\"-1.6002\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-1.1938\" x2=\"-0.889\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-0.6858\" x2=\"0.889\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-1.1938\" x2=\"1.6002\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-1.1938\" x2=\"1.6002\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-0.6858\" x2=\"0.889\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"0.254\" x2=\"0.889\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-0.254\" x2=\"1.6002\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-0.254\" x2=\"1.6002\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"0.254\" x2=\"0.889\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"1.1938\" x2=\"0.889\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"0.6858\" x2=\"1.6002\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"0.6858\" x2=\"1.6002\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"1.1938\" x2=\"0.889\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-1.5494\" x2=\"0.889\" y2=\"-1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-1.5494\" x2=\"0.889\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"1.5494\" x2=\"0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.3048\" y1=\"1.5494\" x2=\"-0.889\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"1.5494\" x2=\"-0.889\" y2=\"-1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0\" layer=\"51\" curve=\"-180\"/>\n<text x=\"-2.1336\" y=\"1.3716\" size=\"1.27\" layer=\"51\" ratio=\"6\" rot=\"SR0\">*</text>\n<wire x1=\"-0.5588\" y1=\"-1.5494\" x2=\"0.5588\" y2=\"-1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.5588\" y1=\"1.5494\" x2=\"0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"-0.3048\" y1=\"1.5494\" x2=\"-0.5588\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0\" layer=\"21\" curve=\"-180\"/>\n<text x=\"-2.1336\" y=\"1.3716\" size=\"1.27\" layer=\"21\" ratio=\"6\" rot=\"SR0\">*</text>\n<text x=\"-4.699\" y=\"2.032\" size=\"2.0828\" layer=\"25\" ratio=\"10\" rot=\"SR0\">&gt;NAME</text>\n<text x=\"-5.5372\" y=\"-4.0386\" size=\"2.0828\" layer=\"27\" ratio=\"10\" rot=\"SR0\">&gt;VALUE</text>\n</package>\n</packages>\n</library>\n<library name=\"EMCComponents (rev19e)\">\n<description>&lt;BR&gt;Wurth Elektronik - EMC Components, Power Magnetics, Signal &amp; Communications&lt;br&gt;&lt;Hr&gt;\n&lt;BR&gt;&lt;BR&gt; \n&lt;TABLE BORDER=0 CELLSPACING=0 CELLPADDING=0&gt;\n&lt;TR&gt;   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;&lt;br&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt; &lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------------------------&lt;BR&gt;\n&lt;B&gt;&lt;I&gt;&lt;span style='font-size:26pt;\n  color:#FF6600;'&gt;WE &lt;/span&gt;&lt;/i&gt;&lt;/b&gt;\n&lt;BR&gt;\n      ---------------------------&lt;BR&gt;&lt;b&gt;Würth Elektronik&lt;/b&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n\n  &lt;TR&gt;\n    &lt;TD COLSPAN=7&gt;&amp;nbsp;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n  \n&lt;/TABLE&gt;\n&lt;B&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;More than you expect&lt;BR&gt;&lt;BR&gt;&lt;BR&gt;&lt;/B&gt;\n\n&lt;HR&gt;&lt;BR&gt;\n&lt;b&gt;Würth Elektronik eiSos GmbH &amp; Co. KG&lt;/b&gt;&lt;br&gt;\nEMC &amp; Inductive Solutions&lt;br&gt;\n\nMax-Eyth-Str.1&lt;br&gt;\nD-74638 Waldenburg&lt;br&gt;\n&lt;br&gt;\nTel: +49 (0)7942-945-0&lt;br&gt;\nFax:+49 (0)7942-945-5000&lt;br&gt;\n&lt;br&gt;\n&lt;a href=\"http://www.we-online.com/web/en/electronic_components/produkte_pb/bauteilebibliotheken/eagle_4.php\"&gt;www.we-online.com/eagle&lt;/a&gt;&lt;br&gt;\n&lt;a href=\"mailto:libraries@we-online.com\"&gt;libraries@we-online.com&lt;/a&gt; &lt;BR&gt;&lt;BR&gt;\n&lt;br&gt;&lt;HR&gt;&lt;BR&gt;\nNeither Autodesk nor Würth Elektronik eiSos does warrant that this library is error-free or &lt;br&gt;\nthat it meets your specific requirements.&lt;br&gt;&lt;BR&gt;\nPlease contact us for more information.&lt;br&gt;&lt;BR&gt;&lt;br&gt;\n\n&lt;HR&gt;\nEagle Version 6, Library Revision 2019e, 2019-06-27&lt;br&gt;\n\n&lt;HR&gt;\nCopyright: Würth Elektronik</description>\n<packages>\n<package name=\"WE-TPC_2811/2813_OLD\">\n<wire x1=\"-1.4\" y1=\"1.4\" x2=\"1.4\" y2=\"1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.4\" y1=\"1.4\" x2=\"1.4\" y2=\"-1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.4\" y1=\"-1.4\" x2=\"-1.4\" y2=\"-1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"-1.4\" x2=\"-1.4\" y2=\"1.4\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.1\" y=\"0\" dx=\"3.2\" dy=\"1\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"2\" x=\"1.1\" y=\"0\" dx=\"3.2\" dy=\"1\" layer=\"1\" rot=\"R90\"/>\n<text x=\"-1.56\" y=\"2.18\" size=\"0.6096\" layer=\"27\">&gt;VALUE</text>\n<text x=\"-0.21\" y=\"-2.6\" size=\"0.6096\" layer=\"25\" align=\"bottom-center\">&gt;NAME</text>\n<wire x1=\"-0.4\" y1=\"1.4\" x2=\"0.4\" y2=\"1.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-0.4\" y1=\"-1.4\" x2=\"0.4\" y2=\"-1.4\" width=\"0.127\" layer=\"21\"/>\n<polygon width=\"0.127\" layer=\"39\">\n<vertex x=\"-1.8\" y=\"1.8\"/>\n<vertex x=\"1.8\" y=\"1.8\"/>\n<vertex x=\"1.8\" y=\"-1.8\"/>\n<vertex x=\"-1.8\" y=\"-1.8\"/>\n</polygon>\n</package>\n</packages>\n</library>\n<library name=\"MPU-6050 hand solder\">\n<packages>\n<package name=\"QFN-24-4MM2\">\n<circle x=\"-1.78\" y=\"1.78\" radius=\"0.0632\" width=\"0.127\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"0.2\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"-2\" y1=\"2\" x2=\"2\" y2=\"2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"2\" x2=\"2\" y2=\"-2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"-2\" x2=\"-2\" y2=\"-2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-2\" y1=\"-2\" x2=\"-2\" y2=\"2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.8\" y1=\"2.1\" x2=\"2.1\" y2=\"2.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.1\" y1=\"2.1\" x2=\"2.1\" y2=\"1.8\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"1.8\" y1=\"-2.1\" x2=\"2.1\" y2=\"-2.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.1\" y1=\"-2.1\" x2=\"2.1\" y2=\"-1.8\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-1.8\" y1=\"-2.1\" x2=\"-2.1\" y2=\"-2.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-2.1\" y1=\"-2.1\" x2=\"-2.1\" y2=\"-1.8\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-2.1\" y1=\"1.8\" x2=\"-1.8\" y2=\"2.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0.2\" x2=\"0\" y2=\"1.4\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"-0.2\" y1=\"1.2\" x2=\"0\" y2=\"1.4\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"1.4\" x2=\"0.2\" y2=\"1.2\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"-0.3\" y1=\"0.7\" x2=\"0.3\" y2=\"0.7\" width=\"0.1\" layer=\"51\" curve=\"-161.075356\"/>\n<wire x1=\"0.4\" y1=\"0.8\" x2=\"0.3\" y2=\"0.7\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"0.3\" y1=\"0.7\" x2=\"0.2\" y2=\"0.7\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"0.2\" y1=\"0\" x2=\"1.4\" y2=\"0\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"1.2\" y1=\"0.2\" x2=\"1.4\" y2=\"0\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"1.4\" y1=\"0\" x2=\"1.2\" y2=\"-0.2\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"0.7\" y1=\"0.3\" x2=\"0.7\" y2=\"-0.3\" width=\"0.1\" layer=\"51\" curve=\"-161.075356\"/>\n<wire x1=\"0.8\" y1=\"-0.4\" x2=\"0.7\" y2=\"-0.3\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"0.7\" y1=\"-0.3\" x2=\"0.7\" y2=\"-0.2\" width=\"0.1\" layer=\"51\"/>\n<rectangle x1=\"-0.8382\" y1=\"0.3302\" x2=\"-0.3556\" y2=\"0.8128\" layer=\"31\"/>\n<rectangle x1=\"0.4318\" y1=\"0.3302\" x2=\"0.9144\" y2=\"0.8128\" layer=\"31\"/>\n<rectangle x1=\"-0.8255\" y1=\"-0.8763\" x2=\"-0.3429\" y2=\"-0.3937\" layer=\"31\"/>\n<rectangle x1=\"0.3937\" y1=\"-0.8763\" x2=\"0.8763\" y2=\"-0.3937\" layer=\"31\"/>\n<smd name=\"1\" x=\"-2.3162\" y=\"1.2567\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"-2.3162\" y=\"0.7496\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"-2.3162\" y=\"0.2475\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"4\" x=\"-2.3162\" y=\"-0.2875\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"5\" x=\"-2.3162\" y=\"-0.7921\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"6\" x=\"-2.3162\" y=\"-1.2967\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"7\" x=\"-1.2667\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"8\" x=\"-0.7621\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"9\" x=\"-0.2575\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"10\" x=\"0.2775\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"11\" x=\"0.7796\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"12\" x=\"1.2867\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"13\" x=\"2.3362\" y=\"-1.2967\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"14\" x=\"2.3362\" y=\"-0.7921\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"15\" x=\"2.3362\" y=\"-0.2875\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"16\" x=\"2.3362\" y=\"0.2475\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"17\" x=\"2.3362\" y=\"0.7496\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"18\" x=\"2.3362\" y=\"1.2567\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"19\" x=\"1.2867\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"20\" x=\"0.7796\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"21\" x=\"0.2775\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"22\" x=\"-0.2575\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"23\" x=\"-0.7621\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"24\" x=\"-1.2667\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"P$1\" x=\"0.02\" y=\"-0.01\" dx=\"2.6162\" dy=\"2.6162\" layer=\"1\" cream=\"no\"/>\n<text x=\"-0.6\" y=\"1\" size=\"0.254\" layer=\"51\">Y</text>\n<text x=\"1.1\" y=\"0.4\" size=\"0.254\" layer=\"51\">X</text>\n<text x=\"-0.1\" y=\"-0.6\" size=\"0.254\" layer=\"51\">Z</text>\n</package>\n</packages>\n</library>\n<library name=\"Eagle_TACT_SWITCHES_rev16d\">\n<description>&lt;BR&gt;Wurth Elektronik - Switches&lt;br&gt;&lt;Hr&gt;\n&lt;BR&gt;&lt;BR&gt; \n&lt;TABLE BORDER=0 CELLSPACING=0 CELLPADDING=0&gt;\n&lt;TR&gt;   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;&lt;br&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt; &lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------------------------&lt;BR&gt;\n&lt;B&gt;&lt;I&gt;&lt;span style='font-size:26pt;\n  color:#FF6600;'&gt;WE &lt;/span&gt;&lt;/i&gt;&lt;/b&gt;\n&lt;BR&gt;\n      ---------------------------&lt;BR&gt;&lt;b&gt;Würth Elektronik&lt;/b&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n\n  &lt;TR&gt;\n    &lt;TD COLSPAN=7&gt;&amp;nbsp;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n  \n&lt;/TABLE&gt;\n&lt;B&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;More than you expect&lt;BR&gt;&lt;BR&gt;&lt;BR&gt;&lt;/B&gt;\n\n&lt;HR&gt;&lt;BR&gt;\n&lt;b&gt;Würth Elektronik eiSos GmbH &amp; Co. KG&lt;/b&gt;&lt;br&gt;\nEMC &amp; Inductive Solutions&lt;br&gt;\n\nMax-Eyth-Str.1&lt;br&gt;\nD-74638 Waldenburg&lt;br&gt;\n&lt;br&gt;\nTel: +49 (0)7942-945-0&lt;br&gt;\nFax:+49 (0)7942-945-405&lt;br&gt;\n&lt;br&gt;\n&lt;a href=\"http://www.we-online.com/eagle\"&gt;http://www.we-online.com/eagle&lt;/a&gt;&lt;br&gt;\n&lt;a href=\"mailto:libraries@we-online.com\"&gt;libraries@we-online.com&lt;/a&gt; &lt;BR&gt;&lt;BR&gt;\n&lt;br&gt;&lt;HR&gt;&lt;BR&gt;\nNeither CadSoft nor WE-eiSos does warrant that this library is error-free or &lt;br&gt;\nthat it meets your specific requirements.&lt;br&gt;&lt;BR&gt;\nPlease contact us for more information.&lt;br&gt;&lt;BR&gt;&lt;br&gt;\n&lt;hr&gt;\nEagle Version 6, Library Revision 2016d, 2016-05-06&lt;br&gt;\n&lt;HR&gt;\nCopyright: Würth Elektronik</description>\n<packages>\n<package name=\"434331045822\">\n<description>WS-TUS-3.5x4.7 mm side push SMD Tact Switch, 4 pins</description>\n<smd name=\"4\" x=\"-2.8\" y=\"-0.85\" dx=\"1.2\" dy=\"1\" layer=\"1\"/>\n<smd name=\"3\" x=\"-2.8\" y=\"0.85\" dx=\"1.2\" dy=\"1\" layer=\"1\"/>\n<smd name=\"1\" x=\"2.8\" y=\"0.85\" dx=\"1.2\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"2.8\" y=\"-0.85\" dx=\"1.2\" dy=\"1\" layer=\"1\"/>\n<text x=\"-3.4248\" y=\"2.8505\" size=\"1.27\" layer=\"25\">&gt;NAME</text>\n<text x=\"-3.4248\" y=\"-4.6286\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n<wire x1=\"-2.35\" y1=\"-1.75\" x2=\"-1.3\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"1.3\" y1=\"-1.75\" x2=\"2.35\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.35\" y1=\"-1.75\" x2=\"2.35\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2.35\" y1=\"1.75\" x2=\"-2.35\" y2=\"1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-2.35\" y1=\"1.75\" x2=\"-2.35\" y2=\"-1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.3\" y1=\"-2.25\" x2=\"1.3\" y2=\"-2.25\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"1.3\" y1=\"-2.25\" x2=\"1.3\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"1.3\" y1=\"-1.75\" x2=\"-1.3\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-1.3\" y1=\"-1.75\" x2=\"-1.3\" y2=\"-2.25\" width=\"0.127\" layer=\"21\"/>\n<text x=\"1.1\" y=\"0.2\" size=\"1.27\" layer=\"51\">1</text>\n<wire x1=\"-2.35\" y1=\"1.75\" x2=\"-2.35\" y2=\"1.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.35\" y1=\"1.75\" x2=\"2.35\" y2=\"1.56\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-2.35\" y1=\"-0.16\" x2=\"-2.35\" y2=\"0.15\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.35\" y1=\"0.15\" x2=\"2.35\" y2=\"-0.15\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.35\" y1=\"-1.54\" x2=\"2.35\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-2.35\" y1=\"-1.54\" x2=\"-2.35\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<polygon width=\"0.127\" layer=\"39\">\n<vertex x=\"-3.4\" y=\"2.4\"/>\n<vertex x=\"3.4\" y=\"2.4\"/>\n<vertex x=\"3.4\" y=\"-2.5\"/>\n<vertex x=\"-3.4\" y=\"-2.5\"/>\n</polygon>\n</package>\n</packages>\n</library>\n</libraries>\n<attributes>\n</attributes>\n<variantdefs>\n</variantdefs>\n<classes>\n<class number=\"0\" name=\"default\" width=\"0\" drill=\"0\">\n</class>\n</classes>\n<designrules name=\"oshpark-2layer *\">\n<description language=\"en\">&lt;b&gt;OSH Park Design Rules&lt;/b&gt;\n&lt;p&gt;\nPlease make sure your boards conform to these design rules.\n&lt;/p&gt;\n&lt;p&gt;\nNote, that not all DRC settings must be set by the manufacturer. Several can be adjusted for the design, including those listed on our docs page here. \n&lt;a href=&quot;http://docs.oshpark.com/design-tools/eagle/design-rules-files/&quot;&gt;Adjustable Settings&lt;/a&gt;\n&lt;/p&gt;</description>\n<param name=\"layerSetup\" value=\"(1*16)\"/>\n<param name=\"mtCopper\" value=\"0.035559375mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.035559375mm\"/>\n<param name=\"mtIsolate\" value=\"1.6mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm\"/>\n<param name=\"mdWireWire\" value=\"6mil\"/>\n<param name=\"mdWirePad\" value=\"6mil\"/>\n<param name=\"mdWireVia\" value=\"6mil\"/>\n<param name=\"mdPadPad\" value=\"6mil\"/>\n<param name=\"mdPadVia\" value=\"6mil\"/>\n<param name=\"mdViaVia\" value=\"6mil\"/>\n<param name=\"mdSmdPad\" value=\"6mil\"/>\n<param name=\"mdSmdVia\" value=\"6mil\"/>\n<param name=\"mdSmdSmd\" value=\"6mil\"/>\n<param name=\"mdViaViaSameLayer\" value=\"8mil\"/>\n<param name=\"mnLayersViaInSmd\" value=\"2\"/>\n<param name=\"mdCopperDimension\" value=\"15mil\"/>\n<param name=\"mdDrill\" value=\"6mil\"/>\n<param name=\"mdSmdStop\" value=\"0mil\"/>\n<param name=\"msWidth\" value=\"6mil\"/>\n<param name=\"msDrill\" value=\"10mil\"/>\n<param name=\"msMicroVia\" value=\"10mil\"/>\n<param name=\"msBlindViaRatio\" value=\"0.5\"/>\n<param name=\"rvPadTop\" value=\"0.25\"/>\n<param name=\"rvPadInner\" value=\"0.25\"/>\n<param name=\"rvPadBottom\" value=\"0.25\"/>\n<param name=\"rvViaOuter\" value=\"0.25\"/>\n<param name=\"rvViaInner\" value=\"0.25\"/>\n<param name=\"rvMicroViaOuter\" value=\"0.25\"/>\n<param name=\"rvMicroViaInner\" value=\"0.25\"/>\n<param name=\"rlMinPadTop\" value=\"5mil\"/>\n<param name=\"rlMaxPadTop\" value=\"20mil\"/>\n<param name=\"rlMinPadInner\" value=\"5mil\"/>\n<param name=\"rlMaxPadInner\" value=\"20mil\"/>\n<param name=\"rlMinPadBottom\" value=\"5mil\"/>\n<param name=\"rlMaxPadBottom\" value=\"20mil\"/>\n<param name=\"rlMinViaOuter\" value=\"5mil\"/>\n<param name=\"rlMaxViaOuter\" value=\"20mil\"/>\n<param name=\"rlMinViaInner\" value=\"5mil\"/>\n<param name=\"rlMaxViaInner\" value=\"20mil\"/>\n<param name=\"rlMinMicroViaOuter\" value=\"5mil\"/>\n<param name=\"rlMaxMicroViaOuter\" value=\"20mil\"/>\n<param name=\"rlMinMicroViaInner\" value=\"5mil\"/>\n<param name=\"rlMaxMicroViaInner\" value=\"20mil\"/>\n<param name=\"psTop\" value=\"-1\"/>\n<param name=\"psBottom\" value=\"-1\"/>\n<param name=\"psFirst\" value=\"-1\"/>\n<param name=\"psElongationLong\" value=\"100\"/>\n<param name=\"psElongationOffset\" value=\"100\"/>\n<param name=\"mvStopFrame\" value=\"1\"/>\n<param name=\"mvCreamFrame\" value=\"0\"/>\n<param name=\"mlMinStopFrame\" value=\"2.5mil\"/>\n<param name=\"mlMaxStopFrame\" value=\"2.5mil\"/>\n<param name=\"mlMinCreamFrame\" value=\"0mil\"/>\n<param name=\"mlMaxCreamFrame\" value=\"0mil\"/>\n<param name=\"mlViaStopLimit\" value=\"43mil\"/>\n<param name=\"srRoundness\" value=\"0\"/>\n<param name=\"srMinRoundness\" value=\"0mil\"/>\n<param name=\"srMaxRoundness\" value=\"0mil\"/>\n<param name=\"slThermalIsolate\" value=\"10mil\"/>\n<param name=\"slThermalsForVias\" value=\"0\"/>\n<param name=\"dpMaxLengthDifference\" value=\"10mm\"/>\n<param name=\"dpGapFactor\" value=\"2.5\"/>\n<param name=\"checkGrid\" value=\"0\"/>\n<param name=\"checkAngle\" value=\"1\"/>\n<param name=\"checkFont\" value=\"1\"/>\n<param name=\"checkRestrict\" value=\"1\"/>\n<param name=\"useDiameter\" value=\"13\"/>\n<param name=\"maxErrors\" value=\"50\"/>\n</designrules>\n<autorouter>\n<pass name=\"Default\">\n<param name=\"RoutingGrid\" value=\"50mil\"/>\n<param name=\"AutoGrid\" value=\"1\"/>\n<param name=\"Efforts\" value=\"0\"/>\n<param name=\"TopRouterVariant\" value=\"1\"/>\n<param name=\"tpViaShape\" value=\"round\"/>\n<param name=\"PrefDir.1\" value=\"a\"/>\n<param name=\"PrefDir.2\" value=\"0\"/>\n<param name=\"PrefDir.3\" value=\"0\"/>\n<param name=\"PrefDir.4\" value=\"0\"/>\n<param name=\"PrefDir.5\" value=\"0\"/>\n<param name=\"PrefDir.6\" value=\"0\"/>\n<param name=\"PrefDir.7\" value=\"0\"/>\n<param name=\"PrefDir.8\" value=\"0\"/>\n<param name=\"PrefDir.9\" value=\"0\"/>\n<param name=\"PrefDir.10\" value=\"0\"/>\n<param name=\"PrefDir.11\" value=\"0\"/>\n<param name=\"PrefDir.12\" value=\"0\"/>\n<param name=\"PrefDir.13\" value=\"0\"/>\n<param name=\"PrefDir.14\" value=\"0\"/>\n<param name=\"PrefDir.15\" value=\"0\"/>\n<param name=\"PrefDir.16\" value=\"a\"/>\n<param name=\"cfVia\" value=\"8\"/>\n<param name=\"cfNonPref\" value=\"5\"/>\n<param name=\"cfChangeDir\" value=\"2\"/>\n<param name=\"cfOrthStep\" value=\"2\"/>\n<param name=\"cfDiagStep\" value=\"3\"/>\n<param name=\"cfExtdStep\" value=\"0\"/>\n<param name=\"cfBonusStep\" value=\"1\"/>\n<param name=\"cfMalusStep\" value=\"1\"/>\n<param name=\"cfPadImpact\" value=\"4\"/>\n<param name=\"cfSmdImpact\" value=\"4\"/>\n<param name=\"cfBusImpact\" value=\"0\"/>\n<param name=\"cfHugging\" value=\"3\"/>\n<param name=\"cfAvoid\" value=\"4\"/>\n<param name=\"cfPolygon\" value=\"10\"/>\n<param name=\"cfBase.1\" value=\"0\"/>\n<param name=\"cfBase.2\" value=\"1\"/>\n<param name=\"cfBase.3\" value=\"1\"/>\n<param name=\"cfBase.4\" value=\"1\"/>\n<param name=\"cfBase.5\" value=\"1\"/>\n<param name=\"cfBase.6\" value=\"1\"/>\n<param name=\"cfBase.7\" value=\"1\"/>\n<param name=\"cfBase.8\" value=\"1\"/>\n<param name=\"cfBase.9\" value=\"1\"/>\n<param name=\"cfBase.10\" value=\"1\"/>\n<param name=\"cfBase.11\" value=\"1\"/>\n<param name=\"cfBase.12\" value=\"1\"/>\n<param name=\"cfBase.13\" value=\"1\"/>\n<param name=\"cfBase.14\" value=\"1\"/>\n<param name=\"cfBase.15\" value=\"1\"/>\n<param name=\"cfBase.16\" value=\"0\"/>\n<param name=\"mnVias\" value=\"20\"/>\n<param name=\"mnSegments\" value=\"9999\"/>\n<param name=\"mnExtdSteps\" value=\"9999\"/>\n<param name=\"mnRipupLevel\" value=\"10\"/>\n<param name=\"mnRipupSteps\" value=\"100\"/>\n<param name=\"mnRipupTotal\" value=\"100\"/>\n</pass>\n<pass name=\"Follow-me\" refer=\"Default\" active=\"yes\">\n</pass>\n<pass name=\"Busses\" refer=\"Default\" active=\"yes\">\n<param name=\"cfNonPref\" value=\"4\"/>\n<param name=\"cfBusImpact\" value=\"4\"/>\n<param name=\"cfHugging\" value=\"0\"/>\n<param name=\"mnVias\" value=\"0\"/>\n</pass>\n<pass name=\"Route\" refer=\"Default\" active=\"yes\">\n</pass>\n<pass name=\"Optimize1\" refer=\"Default\" active=\"yes\">\n<param name=\"cfVia\" value=\"99\"/>\n<param name=\"cfExtdStep\" value=\"10\"/>\n<param name=\"cfHugging\" value=\"1\"/>\n<param name=\"mnExtdSteps\" value=\"1\"/>\n<param name=\"mnRipupLevel\" value=\"0\"/>\n</pass>\n<pass name=\"Optimize2\" refer=\"Optimize1\" active=\"yes\">\n<param name=\"cfNonPref\" value=\"0\"/>\n<param name=\"cfChangeDir\" value=\"6\"/>\n<param name=\"cfExtdStep\" value=\"0\"/>\n<param name=\"cfBonusStep\" value=\"2\"/>\n<param name=\"cfMalusStep\" value=\"2\"/>\n<param name=\"cfPadImpact\" value=\"2\"/>\n<param name=\"cfSmdImpact\" value=\"2\"/>\n<param name=\"cfHugging\" value=\"0\"/>\n</pass>\n<pass name=\"Optimize3\" refer=\"Optimize2\" active=\"yes\">\n<param name=\"cfChangeDir\" value=\"8\"/>\n<param name=\"cfPadImpact\" value=\"0\"/>\n<param name=\"cfSmdImpact\" value=\"0\"/>\n</pass>\n<pass name=\"Optimize4\" refer=\"Optimize3\" active=\"yes\">\n<param name=\"cfChangeDir\" value=\"25\"/>\n</pass>\n</autorouter>\n<elements>\n<element name=\"S1\" library=\"SparkFun-Electromechanical\" package=\"JOYSTICK_MINI\" value=\"5-WAY-TACTILE-SWITCH\" x=\"13\" y=\"5.5\" smashed=\"yes\" rot=\"R315\"/>\n<element name=\"SW1\" library=\"microbuilder\" package=\"EVQ-Q2_SMALLER\" value=\"EVQQ\" x=\"44.865\" y=\"5.5\" smashed=\"yes\"/>\n<element name=\"SW2\" library=\"microbuilder\" package=\"EVQ-Q2_SMALLER\" value=\"EVQQ\" x=\"56.5\" y=\"5.5\" smashed=\"yes\"/>\n<element name=\"U2\" library=\"SparkFun-RF\" package=\"ESP-WROOM-32\" value=\"ESP-WROOM-32\" x=\"31.92\" y=\"39.27\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"IC-13849\" x=\"31.92\" y=\"39.27\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"R8\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"44.1325\" y=\"43.815\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"26.1325\" y=\"43.815\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"C5\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"10uF\" x=\"43.18\" y=\"46.355\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-11015\" x=\"39.18\" y=\"34.355\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"C3\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"44.7675\" y=\"46.355\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"36.7675\" y=\"40.355\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"C2\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"4.7uF\" x=\"46.6725\" y=\"43.18\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"34.6725\" y=\"43.18\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"R17\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"48.5775\" y=\"32.0675\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"44.5775\" y=\"32.0675\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"R18\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"53.34\" y=\"31.75\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"57.34\" y=\"31.75\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"Q2\" library=\"esp32-thing-temp\" package=\"SC70-6\" value=\"MBT3904DW1T1\" x=\"51.1175\" y=\"32.7025\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"TRANS-13337\" x=\"45.1175\" y=\"35.7025\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"U1\" library=\"SparkFun-PowerIC\" package=\"SOT23-5\" value=\"MCP73831\" x=\"53.975\" y=\"16.51\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"IC-09995\" x=\"57.975\" y=\"40.51\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C6\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"4.7uF\" x=\"51.7525\" y=\"14.605\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"CAP-08280\" x=\"35.7525\" y=\"26.605\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"JP2\" library=\"SparkFun-Connectors\" package=\"JST-2-PTH\" value=\"LiPo\" x=\"59.395\" y=\"16.135\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"CONN-09863\" x=\"55.395\" y=\"20.135\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n<attribute name=\"SKU\" value=\"PRT-09914\" x=\"55.395\" y=\"20.135\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"R6\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"3.9k\" x=\"53.34\" y=\"19.3675\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"RES-08296\" x=\"40.34\" y=\"20.3675\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"C19\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"4.7uF\" x=\"50.4825\" y=\"18.415\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-08280\" x=\"38.4825\" y=\"-2.585\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"C11\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"52.3875\" y=\"26.9875\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"73.3875\" y=\"12.9875\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"C14\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"46.355\" y=\"19.05\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"52.355\" y=\"41.05\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"U4\" library=\"SparkFun-DigitalIC\" package=\"SSOP20_L\" value=\"FT231XS\" x=\"46.355\" y=\"23.495\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"IC-11524\" x=\"25.355\" y=\"20.495\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"R13\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"27\" x=\"53.34\" y=\"23.1775\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"RES-09334\" x=\"80.34\" y=\"45.1775\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"R14\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"27\" x=\"53.34\" y=\"21.9075\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"RES-09334\" x=\"62.34\" y=\"43.9075\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C13\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"47pF\" x=\"53.34\" y=\"20.6375\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-08913\" x=\"62.34\" y=\"30.6375\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C12\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"47pF\" x=\"53.34\" y=\"24.4475\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-08913\" x=\"82.34\" y=\"25.4475\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C16\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"46.0375\" y=\"27.94\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"25.0375\" y=\"25.94\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"F1\" library=\"SparkFun-PowerIC\" package=\"PTC-1206\" value=\"500mA\" x=\"54.61\" y=\"27.305\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"RES-11150\" x=\"47.61\" y=\"-3.695\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"C15\" library=\"SparkFun-Capacitors\" package=\"0603-CAP\" value=\"4.7uF\" x=\"48.895\" y=\"18.415\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-08280\" x=\"54.895\" y=\"-15.585\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"C7\" library=\"SparkFun-Capacitors\" package=\"0805\" value=\"1.0uF\" x=\"55.88\" y=\"39.37\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"CAP-11625\" x=\"59.88\" y=\"68.37\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"D3\" library=\"SparkFun-DiscreteSemi\" package=\"SOD-323\" value=\"BAT20J\" x=\"56.515\" y=\"33.3375\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"DIO-11623\" x=\"19.515\" y=\"42.3375\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"R7\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"56.8325\" y=\"31.75\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"88.8325\" y=\"26.75\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"Q1\" library=\"SparkFun-DiscreteSemi\" package=\"SOT23-3\" value=\"2.5A/30V\" x=\"57.15\" y=\"35.8775\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"TRANS-11308\" x=\"119.15\" y=\"16.8775\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"R10\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"470k\" x=\"43.815\" y=\"39.0525\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"56.815\" y=\"89.0525\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"R11\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"470k\" x=\"45.4025\" y=\"39.0525\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"28.4025\" y=\"-16.9475\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"S2\" library=\"SparkFun-Electromechanical\" package=\"SWITCH-SPST-SMD-A\" value=\"\" x=\"61.635\" y=\"40.445\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"SWCH-10651\" x=\"24.635\" y=\"-4.555\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n<attribute name=\"VALUE\" x=\"60.365\" y=\"39.175\" size=\"0.6096\" layer=\"28\" rot=\"MR90\"/>\n</element>\n<element name=\"K1\" library=\"Eagle_FPC_CONNECTOR_AND_FFC_CAB_rev15c\" package=\"68711014522\" value=\"68711014522\" x=\"32\" y=\"17\" smashed=\"yes\" rot=\"MR0\"/>\n<element name=\"R1\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"0\" x=\"54.61\" y=\"35.56\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"54.61\" y=\"35.56\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"C1\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"4.7uF\" x=\"44.45\" y=\"15.24\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"CAP-08913\" x=\"44.45\" y=\"15.24\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"C8\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"10uF\" x=\"38.735\" y=\"20.0025\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"CAP-08913\" x=\"38.735\" y=\"20.0025\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"C4\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"36.195\" y=\"20.0025\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"36.195\" y=\"20.0025\" size=\"0.3048\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C10\" library=\"SparkFun-Capacitors\" package=\"0805\" value=\"2.2uF\" x=\"49.8475\" y=\"39.6875\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"CAP-11625\" x=\"49.8475\" y=\"39.6875\" size=\"0.3048\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"R2\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"43.815\" y=\"32.7025\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"43.815\" y=\"32.7025\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"R4\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"45.4025\" y=\"34.29\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"45.4025\" y=\"34.29\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"C9\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"46.99\" y=\"39.0525\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"46.99\" y=\"39.0525\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"U$1\" library=\"Microchip_By_element14_Batch_1\" package=\"SOT95P270X145-6N\" value=\"MCP1640CT-I/CHY\" x=\"41.91\" y=\"14.605\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"OC_FARNELL\" value=\"1800208\" x=\"41.91\" y=\"14.605\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n<attribute name=\"MPN\" value=\"MCP1640CT-I/CHY\" x=\"41.91\" y=\"14.605\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n<attribute name=\"PACKAGE\" value=\"SOT-6\" x=\"41.91\" y=\"14.605\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n<attribute name=\"OC_NEWARK\" value=\"73R3626\" x=\"41.91\" y=\"14.605\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n<attribute name=\"SUPPLIER\" value=\"Microchip\" x=\"41.91\" y=\"14.605\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"L1\" library=\"EMCComponents (rev19e)\" package=\"WE-TPC_2811/2813_OLD\" value=\"4.7µH\" x=\"48.26\" y=\"14.2875\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"WE-NUMBER\" value=\"744029004/4,7uH\" x=\"48.26\" y=\"14.2875\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n<attribute name=\"VALUE\" x=\"46.08\" y=\"15.8475\" size=\"0.6096\" layer=\"28\" rot=\"MR270\"/>\n</element>\n<element name=\"R5\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"976k\" x=\"39.37\" y=\"16.51\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"39.37\" y=\"16.51\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"R9\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"309k\" x=\"39.37\" y=\"13.335\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"39.37\" y=\"13.335\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"J2\" library=\"SparkFun-Connectors\" package=\"USB-C-16P\" value=\"\" x=\"56.515\" y=\"23.495\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"CONN-14122\" x=\"45.085\" y=\"34.29\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n<attribute name=\"VALUE\" x=\"60.325\" y=\"23.495\" size=\"0.762\" layer=\"28\" rot=\"MR270\" align=\"center\"/>\n</element>\n<element name=\"U$2\" library=\"MPU-6050 hand solder\" package=\"QFN-24-4MM2\" value=\"MPU-6050-1\" x=\"52.705\" y=\"46.355\" smashed=\"yes\" rot=\"MR90\"/>\n<element name=\"R12\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"56.1975\" y=\"41.5925\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"56.1975\" y=\"41.5925\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"R15\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"56.1975\" y=\"43.18\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"56.1975\" y=\"43.18\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"C17\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"10nF\" x=\"50.8\" y=\"42.2275\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"CAP-08913\" x=\"50.8\" y=\"42.2275\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"C18\" library=\"SparkFun-Capacitors\" package=\"0805\" value=\"2.2uF\" x=\"55.88\" y=\"49.53\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-11625\" x=\"55.88\" y=\"49.53\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C20\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"47.3075\" y=\"47.625\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"47.3075\" y=\"47.625\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"SW3\" library=\"Eagle_TACT_SWITCHES_rev16d\" package=\"434331045822\" value=\"\" x=\"59.055\" y=\"53.34\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"VALUE\" x=\"55.6302\" y=\"57.9686\" size=\"1.27\" layer=\"28\" rot=\"MR180\"/>\n</element>\n<element name=\"C21\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"52.705\" y=\"50.4825\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"52.705\" y=\"50.4825\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"R16\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"60.325\" y=\"49.53\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"60.325\" y=\"49.53\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"U3\" library=\"SparkFun-PowerIC\" package=\"SOT23-5\" value=\"AP2112K-3.3V\" x=\"52.705\" y=\"39.37\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"VREG-12457\" x=\"45.085\" y=\"43.18\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"R3\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"5.1k\" x=\"58.1025\" y=\"30.48\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"58.1025\" y=\"30.48\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"R19\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"5.1k\" x=\"58.1025\" y=\"29.21\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"58.1025\" y=\"29.21\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n</elements>\n<signals>\n<signal name=\"GND\">\n<contactref element=\"U2\" pad=\"GND\"/>\n<contactref element=\"U2\" pad=\"38\"/>\n<contactref element=\"U2\" pad=\"15\"/>\n<contactref element=\"U2\" pad=\"1\"/>\n<contactref element=\"C2\" pad=\"2\"/>\n<contactref element=\"C3\" pad=\"2\"/>\n<contactref element=\"C5\" pad=\"2\"/>\n<contactref element=\"U1\" pad=\"2\"/>\n<contactref element=\"C6\" pad=\"2\"/>\n<contactref element=\"JP2\" pad=\"1\"/>\n<contactref element=\"R6\" pad=\"1\"/>\n<contactref element=\"C19\" pad=\"2\"/>\n<contactref element=\"C11\" pad=\"2\"/>\n<contactref element=\"C13\" pad=\"2\"/>\n<contactref element=\"C12\" pad=\"2\"/>\n<contactref element=\"U4\" pad=\"16\"/>\n<contactref element=\"U4\" pad=\"6\"/>\n<contactref element=\"C16\" pad=\"2\"/>\n<contactref element=\"C15\" pad=\"2\"/>\n<contactref element=\"C14\" pad=\"2\"/>\n<contactref element=\"C7\" pad=\"2\"/>\n<contactref element=\"R7\" pad=\"1\"/>\n<contactref element=\"R11\" pad=\"1\"/>\n<contactref element=\"K1\" pad=\"10\"/>\n<contactref element=\"K1\" pad=\"9\"/>\n<wire x1=\"29.75\" y1=\"17.6\" x2=\"30.25\" y2=\"17.6\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"S1\" pad=\"GND\"/>\n<wire x1=\"40.92\" y1=\"46.97\" x2=\"42.945\" y2=\"46.97\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"42.945\" y1=\"46.97\" x2=\"43.18\" y2=\"47.205\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"43.18\" y1=\"47.205\" x2=\"44.7675\" y2=\"47.205\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"C4\" pad=\"2\"/>\n<contactref element=\"C10\" pad=\"2\"/>\n<polygon width=\"0.508\" layer=\"1\" isolate=\"0.254\">\n<vertex x=\"-1\" y=\"56\"/>\n<vertex x=\"12\" y=\"56\"/>\n<vertex x=\"21\" y=\"47.135\"/>\n<vertex x=\"43\" y=\"47.135\"/>\n<vertex x=\"52\" y=\"56\"/>\n<vertex x=\"65\" y=\"56\"/>\n<vertex x=\"65\" y=\"11\"/>\n<vertex x=\"-1\" y=\"11\"/>\n<vertex x=\"-1\" y=\"23.75\"/>\n<vertex x=\"17.75\" y=\"23.75\"/>\n<vertex x=\"17.75\" y=\"39.5\"/>\n<vertex x=\"-1\" y=\"39.5\"/>\n</polygon>\n<via x=\"29.845\" y=\"41.275\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"22.92\" y1=\"46.97\" x2=\"40.92\" y2=\"46.97\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"22.92\" y1=\"46.97\" x2=\"20.34\" y2=\"46.97\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"20.34\" y1=\"46.97\" x2=\"20.32\" y2=\"46.99\" width=\"0.508\" layer=\"16\"/>\n<via x=\"20.32\" y=\"46.99\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"37.635\" y1=\"28.97\" x2=\"37.635\" y2=\"27.4525\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"37.635\" y1=\"27.4525\" x2=\"37.7825\" y2=\"27.305\" width=\"0.508\" layer=\"16\"/>\n<via x=\"37.7825\" y=\"27.305\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"29.75\" y1=\"17.6\" x2=\"29.75\" y2=\"19.145\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"29.75\" y1=\"19.145\" x2=\"28.575\" y2=\"20.32\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"28.575\" y=\"20.32\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"46.6725\" y1=\"26.1747\" x2=\"46.6725\" y2=\"27.725\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"46.6725\" y1=\"27.725\" x2=\"46.8875\" y2=\"27.94\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"46.0375\" y1=\"20.8153\" x2=\"46.0375\" y2=\"19.5825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.0375\" y1=\"19.5825\" x2=\"45.505\" y2=\"19.05\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"52.3875\" y1=\"27.8375\" x2=\"51.3325\" y2=\"27.8375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"51.3325\" y1=\"27.8375\" x2=\"51.1175\" y2=\"27.6225\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"51.1175\" y1=\"27.6225\" x2=\"51.1175\" y2=\"25.4\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"51.7525\" y1=\"24.4475\" x2=\"52.49\" y2=\"24.4475\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"46.8875\" y1=\"27.94\" x2=\"48.26\" y2=\"27.94\" width=\"0.508\" layer=\"16\"/>\n<via x=\"48.26\" y=\"27.94\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"31.92\" y1=\"39.27\" x2=\"31.82\" y2=\"39.37\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"31.82\" y1=\"39.37\" x2=\"31.75\" y2=\"39.37\" width=\"0.254\" layer=\"16\"/>\n<via x=\"29.845\" y=\"37.465\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"33.655\" y=\"37.465\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"33.655\" y=\"41.275\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"31.75\" y=\"39.37\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"28.575\" y=\"46.99\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"34.925\" y=\"46.99\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"15.351128125\" y1=\"3.14886875\" x2=\"16.277496875\" y2=\"2.2225\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"16.277496875\" y1=\"2.2225\" x2=\"17.145\" y2=\"2.2225\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"17.145\" y1=\"2.2225\" x2=\"18.415\" y2=\"3.4925\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"18.415\" y1=\"3.4925\" x2=\"18.415\" y2=\"13.97\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"55.88\" y1=\"38.47\" x2=\"55.8275\" y2=\"38.47\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.9275\" y1=\"39.37\" x2=\"55.8275\" y2=\"38.47\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"C9\" pad=\"1\"/>\n<wire x1=\"46.99\" y1=\"38.2025\" x2=\"45.4025\" y2=\"38.2025\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"U$1\" pad=\"2\"/>\n<contactref element=\"C8\" pad=\"1\"/>\n<contactref element=\"C1\" pad=\"2\"/>\n<wire x1=\"41.91\" y1=\"13.3096\" x2=\"41.91\" y2=\"12.065\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"41.91\" y=\"12.065\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"45.72\" y=\"14.2875\" extent=\"1-16\" drill=\"0.5\"/>\n<contactref element=\"R9\" pad=\"2\"/>\n<wire x1=\"39.37\" y1=\"12.485\" x2=\"39.37\" y2=\"12.7\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.37\" y1=\"12.7\" x2=\"40.005\" y2=\"12.065\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.005\" y1=\"12.065\" x2=\"41.91\" y2=\"12.065\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"46.99\" y=\"36.83\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"46.99\" y1=\"38.2025\" x2=\"46.99\" y2=\"36.83\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"45.72\" y1=\"14.2875\" x2=\"44.5525\" y2=\"14.2875\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"44.5525\" y1=\"14.2875\" x2=\"44.45\" y2=\"14.39\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"J2\" pad=\"GND\"/>\n<contactref element=\"J2\" pad=\"GND2\"/>\n<contactref element=\"J2\" pad=\"SHLD2\" route=\"any\" routetag=\"J1.SHLD\"/>\n<contactref element=\"J2\" pad=\"SHLD5\" route=\"any\" routetag=\"J1.SHLD\"/>\n<contactref element=\"J2\" pad=\"SHLD4\" route=\"any\" routetag=\"J1.SHLD\"/>\n<contactref element=\"J2\" pad=\"SHLD8\" route=\"any\" routetag=\"J1.SHLD\"/>\n<contactref element=\"J2\" pad=\"SHLD7\" route=\"any\" routetag=\"J1.SHLD\"/>\n<contactref element=\"J2\" pad=\"SHLD3\" route=\"any\" routetag=\"J1.SHLD\"/>\n<contactref element=\"J2\" pad=\"SHLD6\" route=\"any\" routetag=\"J1.SHLD\"/>\n<contactref element=\"J2\" pad=\"SHLD1\" route=\"any\" routetag=\"J1.SHLD\"/>\n<contactref element=\"C18\" pad=\"2\"/>\n<contactref element=\"U$2\" pad=\"18\"/>\n<contactref element=\"C17\" pad=\"2\"/>\n<contactref element=\"C21\" pad=\"2\"/>\n<contactref element=\"R2\" pad=\"1\"/>\n<contactref element=\"R16\" pad=\"2\"/>\n<contactref element=\"R4\" pad=\"1\"/>\n<contactref element=\"U$2\" pad=\"9\"/>\n<contactref element=\"U$2\" pad=\"1\"/>\n<contactref element=\"U$2\" pad=\"11\"/>\n<contactref element=\"C20\" pad=\"2\"/>\n<wire x1=\"56.515\" y1=\"20.27\" x2=\"56.515\" y2=\"19.685\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"19.685\" x2=\"56.8325\" y2=\"19.3675\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.8325\" y1=\"19.3675\" x2=\"57.2375\" y2=\"19.3675\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.2375\" y1=\"19.3675\" x2=\"57.43\" y2=\"19.175\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"26.72\" x2=\"56.515\" y2=\"27.305\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"27.305\" x2=\"56.8325\" y2=\"27.6225\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.8325\" y1=\"27.6225\" x2=\"57.2375\" y2=\"27.6225\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.2375\" y1=\"27.6225\" x2=\"57.43\" y2=\"27.815\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"U3\" pad=\"2\"/>\n<wire x1=\"54.0051\" y1=\"39.37\" x2=\"54.9275\" y2=\"39.37\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"50.4825\" y1=\"19.265\" x2=\"52.3875\" y2=\"19.265\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"52.3875\" y1=\"19.265\" x2=\"52.49\" y2=\"19.3675\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"52.49\" y1=\"20.6375\" x2=\"52.49\" y2=\"19.3675\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"48.895\" y1=\"19.265\" x2=\"50.4825\" y2=\"19.265\" width=\"0.4064\" layer=\"16\"/>\n<via x=\"50.4825\" y=\"20.6375\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"50.4825\" y1=\"19.265\" x2=\"50.4825\" y2=\"20.6375\" width=\"0.508\" layer=\"16\"/>\n<via x=\"46.355\" y=\"17.78\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"53.9617\" y1=\"48.6912\" x2=\"53.9617\" y2=\"49.53\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"53.9617\" y1=\"49.53\" x2=\"53.9617\" y2=\"50.0758\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"53.9617\" y1=\"50.0758\" x2=\"53.555\" y2=\"50.4825\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"54.98\" y1=\"49.53\" x2=\"53.9617\" y2=\"49.53\" width=\"0.254\" layer=\"16\"/>\n<via x=\"53.975\" y=\"42.2275\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"48.5775\" y=\"42.545\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"57.15\" y=\"38.4175\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"58.395\" y1=\"16.135\" x2=\"58.395\" y2=\"13.945\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"58.395\" y1=\"13.945\" x2=\"55.88\" y2=\"11.43\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.88\" y1=\"11.43\" x2=\"53.975\" y2=\"11.43\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.975\" y1=\"11.43\" x2=\"51.7525\" y2=\"11.43\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"51.7525\" y1=\"11.43\" x2=\"47.9425\" y2=\"11.43\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"51.7525\" y1=\"11.43\" x2=\"51.7525\" y2=\"13.755\" width=\"0.508\" layer=\"16\"/>\n<via x=\"47.9425\" y=\"11.43\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"48.895\" y=\"11.43\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"51.65\" y1=\"42.2275\" x2=\"53.975\" y2=\"42.2275\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"46.6725\" y1=\"44.03\" x2=\"47.0925\" y2=\"44.03\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.0925\" y1=\"44.03\" x2=\"48.5775\" y2=\"42.545\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"49.8475\" y=\"37.7825\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"49.8475\" y1=\"38.7875\" x2=\"49.8475\" y2=\"37.7825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"55.88\" y1=\"38.47\" x2=\"57.0975\" y2=\"38.47\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.0975\" y1=\"38.47\" x2=\"57.15\" y2=\"38.4175\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"54.9275\" y=\"51.1175\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"58.1025\" y=\"49.53\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"53.555\" y1=\"50.4825\" x2=\"54.2925\" y2=\"50.4825\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"54.2925\" y1=\"50.4825\" x2=\"54.9275\" y2=\"51.1175\" width=\"0.4064\" layer=\"16\"/>\n<via x=\"51.1175\" y=\"27.305\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"58.1025\" y1=\"49.53\" x2=\"59.475\" y2=\"49.53\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"35.345\" y1=\"20.0025\" x2=\"35.345\" y2=\"21.0575\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"35.345\" y1=\"21.0575\" x2=\"35.8775\" y2=\"21.59\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"35.8775\" y1=\"21.59\" x2=\"37.7825\" y2=\"21.59\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"38.735\" y1=\"20.8525\" x2=\"38.735\" y2=\"20.6375\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.505\" y1=\"19.05\" x2=\"45.505\" y2=\"18.63\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.505\" y1=\"18.63\" x2=\"46.355\" y2=\"17.78\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"R19\" pad=\"2\"/>\n<contactref element=\"R3\" pad=\"2\"/>\n<wire x1=\"57.2525\" y1=\"29.21\" x2=\"57.2525\" y2=\"27.9925\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.2525\" y1=\"27.9925\" x2=\"57.43\" y2=\"27.815\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.2525\" y1=\"29.21\" x2=\"57.2525\" y2=\"30.48\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.975\" y1=\"15.2099\" x2=\"53.975\" y2=\"11.43\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.2525\" y1=\"30.48\" x2=\"57.2525\" y2=\"31.32\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.2525\" y1=\"31.32\" x2=\"57.6825\" y2=\"31.75\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"44.5525\" y1=\"34.29\" x2=\"44.5525\" y2=\"32.815\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"44.5525\" y1=\"32.815\" x2=\"44.665\" y2=\"32.7025\" width=\"0.508\" layer=\"16\"/>\n<via x=\"44.45\" y=\"31.4325\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"44.45\" y1=\"31.4325\" x2=\"44.45\" y2=\"32.4875\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"44.45\" y1=\"32.4875\" x2=\"44.665\" y2=\"32.7025\" width=\"0.508\" layer=\"16\"/>\n<via x=\"51.1175\" y=\"25.4\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"50.3334\" y1=\"46.0975\" x2=\"52.4475\" y2=\"46.0975\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"52.4475\" y1=\"46.0975\" x2=\"52.705\" y2=\"46.355\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"50.3334\" y1=\"47.1346\" x2=\"51.9254\" y2=\"47.1346\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"51.9254\" y1=\"47.1346\" x2=\"52.705\" y2=\"46.355\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"53.9617\" y1=\"48.6912\" x2=\"53.9617\" y2=\"47.8149\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"53.9617\" y1=\"44.0388\" x2=\"53.9617\" y2=\"44.9713\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"53.9617\" y1=\"44.9713\" x2=\"53.848\" y2=\"45.085\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"53.9617\" y1=\"47.8149\" x2=\"53.1114\" y2=\"46.9646\" width=\"0.254\" layer=\"16\"/>\n<via x=\"44.7675\" y=\"48.5775\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"44.7675\" y1=\"47.205\" x2=\"44.7675\" y2=\"48.5775\" width=\"0.508\" layer=\"16\"/>\n<via x=\"48.26\" y=\"49.53\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"47.3075\" y1=\"48.475\" x2=\"47.3075\" y2=\"48.5775\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"47.3075\" y1=\"48.5775\" x2=\"48.26\" y2=\"49.53\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"38.735\" y1=\"20.6375\" x2=\"37.7825\" y2=\"21.59\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.9617\" y1=\"44.0388\" x2=\"53.9617\" y2=\"42.2408\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"53.9617\" y1=\"42.2408\" x2=\"53.975\" y2=\"42.2275\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"50.3334\" y1=\"47.1346\" x2=\"48.6479\" y2=\"47.1346\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"48.6479\" y1=\"47.1346\" x2=\"47.3075\" y2=\"48.475\" width=\"0.254\" layer=\"16\"/>\n<via x=\"59.055\" y=\"31.75\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"57.6825\" y1=\"31.75\" x2=\"59.055\" y2=\"31.75\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"47.9425\" y1=\"11.43\" x2=\"42.545\" y2=\"11.43\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"42.545\" y1=\"11.43\" x2=\"41.91\" y2=\"12.065\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"51.1175\" y1=\"25.4\" x2=\"51.1175\" y2=\"25.0825\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"51.1175\" y1=\"25.0825\" x2=\"51.7525\" y2=\"24.4475\" width=\"0.508\" layer=\"16\"/>\n<polygon width=\"0.508\" layer=\"1\" isolate=\"0.254\">\n<vertex x=\"-1\" y=\"23.75\"/>\n<vertex x=\"2\" y=\"23.75\"/>\n<vertex x=\"2\" y=\"39.5\"/>\n<vertex x=\"-1\" y=\"39.5\"/>\n</polygon>\n<wire x1=\"1.32\" y1=\"36.8075\" x2=\"1.32\" y2=\"42.205\" width=\"0.508\" layer=\"1\"/>\n<via x=\"36.83\" y=\"21.59\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"36.83\" y1=\"21.59\" x2=\"37.7825\" y2=\"21.59\" width=\"0\" layer=\"19\" extent=\"16-16\"/>\n</signal>\n<signal name=\"3.3V\">\n<contactref element=\"R8\" pad=\"2\"/>\n<contactref element=\"U2\" pad=\"2\"/>\n<contactref element=\"C3\" pad=\"1\"/>\n<contactref element=\"C5\" pad=\"1\"/>\n<wire x1=\"40.92\" y1=\"45.7\" x2=\"42.985\" y2=\"45.7\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"42.985\" y1=\"45.7\" x2=\"43.18\" y2=\"45.505\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"43.18\" y1=\"45.505\" x2=\"44.7675\" y2=\"45.505\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"C10\" pad=\"1\"/>\n<via x=\"40.005\" y=\"27.94\" extent=\"1-16\" drill=\"0.5\"/>\n<contactref element=\"SW1\" pad=\"A\"/>\n<contactref element=\"SW1\" pad=\"A'\"/>\n<contactref element=\"SW2\" pad=\"A\"/>\n<contactref element=\"SW2\" pad=\"A'\"/>\n<wire x1=\"41.765\" y1=\"3.5\" x2=\"47.965\" y2=\"3.5\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"59.6\" y1=\"3.5\" x2=\"53.4\" y2=\"3.5\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"51.435\" y1=\"8.89\" x2=\"50.8\" y2=\"9.525\" width=\"0.3048\" layer=\"1\"/>\n<via x=\"36.83\" y=\"31.75\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"40.92\" y1=\"45.7\" x2=\"39.35\" y2=\"45.7\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"39.35\" y1=\"45.7\" x2=\"36.83\" y2=\"43.18\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"36.83\" y1=\"31.75\" x2=\"36.83\" y2=\"43.18\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"R12\" pad=\"1\"/>\n<contactref element=\"R15\" pad=\"1\"/>\n<contactref element=\"U$2\" pad=\"13\"/>\n<contactref element=\"C21\" pad=\"1\"/>\n<contactref element=\"U$2\" pad=\"8\"/>\n<contactref element=\"C17\" pad=\"1\"/>\n<contactref element=\"U3\" pad=\"5\"/>\n<wire x1=\"46.355\" y1=\"45.505\" x2=\"47.099790625\" y2=\"45.505\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"47.099790625\" y1=\"45.505\" x2=\"47.27939375\" y2=\"45.43060625\" width=\"0.4064\" layer=\"16\" curve=\"-44.999502\"/>\n<wire x1=\"47.27939375\" y1=\"45.43060625\" x2=\"48.26\" y2=\"44.45\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"48.26\" y1=\"44.45\" x2=\"49.87560625\" y2=\"42.83439375\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"49.95\" y1=\"42.2275\" x2=\"49.95\" y2=\"42.654790625\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"49.95\" y1=\"42.654790625\" x2=\"49.87560625\" y2=\"42.83439375\" width=\"0.4064\" layer=\"16\" curve=\"44.999502\"/>\n<wire x1=\"50.3334\" y1=\"45.5929\" x2=\"49.508109375\" y2=\"45.5929\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"49.508109375\" y1=\"45.5929\" x2=\"49.4029\" y2=\"45.5929\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.4029\" y1=\"45.5929\" x2=\"48.26\" y2=\"44.45\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.4083\" y1=\"48.6912\" x2=\"51.4083\" y2=\"50.0358\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"51.4083\" y1=\"50.0358\" x2=\"51.855\" y2=\"50.4825\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"46.355\" y1=\"49.2125\" x2=\"46.355\" y2=\"45.505\" width=\"0.4064\" layer=\"16\"/>\n<contactref element=\"U$1\" pad=\"6\"/>\n<contactref element=\"U$1\" pad=\"3\"/>\n<contactref element=\"L1\" pad=\"1\"/>\n<contactref element=\"C1\" pad=\"1\"/>\n<wire x1=\"40.9702\" y1=\"13.3096\" x2=\"40.9702\" y2=\"14.3002\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.9702\" y1=\"14.3002\" x2=\"41.275\" y2=\"14.605\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"41.275\" y1=\"14.605\" x2=\"42.545\" y2=\"14.605\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.545\" y1=\"14.605\" x2=\"42.8625\" y2=\"14.9225\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.8625\" y1=\"14.9225\" x2=\"42.8625\" y2=\"15.8877\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.8625\" y1=\"15.8877\" x2=\"42.8498\" y2=\"15.9004\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.45\" y1=\"16.09\" x2=\"43.0394\" y2=\"16.09\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"43.0394\" y1=\"16.09\" x2=\"42.8498\" y2=\"15.9004\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"42.8498\" y1=\"15.9004\" x2=\"42.8498\" y2=\"17.1577\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"42.8498\" y1=\"17.1577\" x2=\"40.005\" y2=\"20.0025\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"40.005\" y1=\"27.94\" x2=\"40.005\" y2=\"20.0025\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"50.8\" y1=\"9.525\" x2=\"50.8\" y2=\"12.7\" width=\"0.3048\" layer=\"1\"/>\n<via x=\"50.8\" y=\"12.7\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"51.949253125\" y1=\"52.49\" x2=\"49.6325\" y2=\"52.49\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"49.6325\" y1=\"52.49\" x2=\"46.355\" y2=\"49.2125\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"51.949253125\" y1=\"52.49\" x2=\"51.949253125\" y2=\"50.576753125\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"51.949253125\" y1=\"50.576753125\" x2=\"51.855\" y2=\"50.4825\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"55.3475\" y1=\"43.18\" x2=\"55.3475\" y2=\"41.5925\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"50.8\" y1=\"12.7\" x2=\"50.8\" y2=\"14.605\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"50.8\" y1=\"14.605\" x2=\"50.165\" y2=\"15.24\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"50.165\" y1=\"15.24\" x2=\"48.4075\" y2=\"15.24\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.4075\" y1=\"15.24\" x2=\"48.26\" y2=\"15.3875\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"36.83\" y1=\"31.75\" x2=\"36.83\" y2=\"31.115\" width=\"0.6096\" layer=\"1\"/>\n<wire x1=\"36.83\" y1=\"31.115\" x2=\"40.005\" y2=\"27.94\" width=\"0.6096\" layer=\"1\"/>\n<wire x1=\"47.965\" y1=\"3.5\" x2=\"51.435\" y2=\"3.5\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"51.435\" y1=\"3.5\" x2=\"53.4\" y2=\"3.5\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"51.435\" y1=\"8.89\" x2=\"51.435\" y2=\"3.5\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"44.7675\" y1=\"45.505\" x2=\"46.355\" y2=\"45.505\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"44.45\" y1=\"16.09\" x2=\"45.505\" y2=\"16.09\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"48.26\" y1=\"15.3875\" x2=\"46.2075\" y2=\"15.3875\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"46.2075\" y1=\"15.3875\" x2=\"45.505\" y2=\"16.09\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.128153125\" y1=\"41.373153125\" x2=\"55.3475\" y2=\"41.5925\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.7675\" y1=\"45.505\" x2=\"44.7675\" y2=\"44.03\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.7675\" y1=\"44.03\" x2=\"44.9825\" y2=\"43.815\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.95\" y1=\"42.2275\" x2=\"49.95\" y2=\"40.69\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"49.95\" y1=\"40.69\" x2=\"49.8475\" y2=\"40.5875\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"51.4049\" y1=\"40.32\" x2=\"50.115\" y2=\"40.32\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"50.115\" y1=\"40.32\" x2=\"49.8475\" y2=\"40.5875\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"51.4049\" y1=\"40.32\" x2=\"51.75\" y2=\"40.32\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.75\" y1=\"40.32\" x2=\"52.705\" y2=\"41.275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"52.705\" y1=\"41.275\" x2=\"55.03\" y2=\"41.275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"55.03\" y1=\"41.275\" x2=\"55.3475\" y2=\"41.5925\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"SW3\" pad=\"2\"/>\n<contactref element=\"SW3\" pad=\"4\"/>\n<wire x1=\"51.949253125\" y1=\"52.49\" x2=\"53.76\" y2=\"52.49\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"53.76\" y1=\"52.49\" x2=\"55.46\" y2=\"54.19\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"56.255\" y1=\"54.19\" x2=\"55.46\" y2=\"54.19\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"61.855\" y1=\"54.19\" x2=\"56.255\" y2=\"54.19\" width=\"0.4064\" layer=\"16\"/>\n</signal>\n<signal name=\"RESET\">\n<contactref element=\"R8\" pad=\"1\"/>\n<contactref element=\"C2\" pad=\"1\"/>\n<contactref element=\"U2\" pad=\"3\"/>\n<contactref element=\"Q2\" pad=\"3\"/>\n<wire x1=\"48.5775\" y1=\"40.9575\" x2=\"47.3075\" y2=\"42.2275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.5775\" y1=\"40.9575\" x2=\"48.5775\" y2=\"37.7825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.5775\" y1=\"37.7825\" x2=\"49.53\" y2=\"36.83\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.53\" y1=\"36.83\" x2=\"52.3875\" y2=\"36.83\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"53.0375\" y1=\"36.18\" x2=\"52.3875\" y2=\"36.83\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"53.0375\" y1=\"36.18\" x2=\"53.0375\" y2=\"35.2575\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.7675\" y1=\"33.6225\" x2=\"51.7675\" y2=\"33.9875\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.7675\" y1=\"33.9875\" x2=\"53.0375\" y2=\"35.2575\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.92\" y1=\"44.43\" x2=\"42.6675\" y2=\"44.43\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.6675\" y1=\"44.43\" x2=\"43.2825\" y2=\"43.815\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.87\" y1=\"42.2275\" x2=\"43.2825\" y2=\"43.815\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.87\" y1=\"42.2275\" x2=\"46.57\" y2=\"42.2275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.57\" y1=\"42.2275\" x2=\"46.6725\" y2=\"42.33\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.3075\" y1=\"42.2275\" x2=\"46.775\" y2=\"42.2275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.775\" y1=\"42.2275\" x2=\"46.6725\" y2=\"42.33\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"ADC_BAT\">\n<contactref element=\"R10\" pad=\"1\"/>\n<contactref element=\"R11\" pad=\"2\"/>\n<contactref element=\"U2\" pad=\"5\"/>\n<contactref element=\"C9\" pad=\"2\"/>\n<wire x1=\"46.99\" y1=\"39.9025\" x2=\"45.4025\" y2=\"39.9025\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.2275\" y1=\"41.91\" x2=\"40.94\" y2=\"41.91\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.94\" y1=\"41.91\" x2=\"40.92\" y2=\"41.89\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.815\" y1=\"39.9025\" x2=\"43.815\" y2=\"40.9575\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.815\" y1=\"40.9575\" x2=\"43.4975\" y2=\"41.275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.4975\" y1=\"41.275\" x2=\"42.8625\" y2=\"41.275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.8625\" y1=\"41.275\" x2=\"42.2275\" y2=\"41.91\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.4025\" y1=\"39.9025\" x2=\"43.815\" y2=\"39.9025\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"TXD\">\n<contactref element=\"U4\" pad=\"4\"/>\n<contactref element=\"U2\" pad=\"35\"/>\n<wire x1=\"45.4025\" y1=\"26.1747\" x2=\"45.4025\" y2=\"25.0825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.4025\" y1=\"25.0825\" x2=\"45.72\" y2=\"24.765\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"45.72\" y=\"24.765\" extent=\"1-16\" drill=\"0.3048\"/>\n<via x=\"20.32\" y=\"43.18\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"20.32\" y1=\"43.18\" x2=\"22.9\" y2=\"43.18\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.9\" y1=\"43.18\" x2=\"22.92\" y2=\"43.16\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.72\" y1=\"24.765\" x2=\"26.035\" y2=\"24.765\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"26.035\" y1=\"24.765\" x2=\"20.32\" y2=\"30.48\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"20.32\" y1=\"30.48\" x2=\"20.32\" y2=\"43.18\" width=\"0.3048\" layer=\"1\"/>\n</signal>\n<signal name=\"RXD\">\n<contactref element=\"U4\" pad=\"20\"/>\n<contactref element=\"U2\" pad=\"34\"/>\n<wire x1=\"43.4975\" y1=\"20.8153\" x2=\"43.4975\" y2=\"22.86\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.4975\" y1=\"22.86\" x2=\"42.545\" y2=\"23.8125\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"42.545\" y=\"23.8125\" extent=\"1-16\" drill=\"0.3048\"/>\n<via x=\"19.3675\" y=\"41.91\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"19.3675\" y1=\"41.91\" x2=\"22.9\" y2=\"41.91\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.9\" y1=\"41.91\" x2=\"22.92\" y2=\"41.89\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.545\" y1=\"23.8125\" x2=\"25.7175\" y2=\"23.8125\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"25.7175\" y1=\"23.8125\" x2=\"19.3675\" y2=\"30.1625\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"19.3675\" y1=\"30.1625\" x2=\"19.3675\" y2=\"41.91\" width=\"0.3048\" layer=\"1\"/>\n</signal>\n<signal name=\"IO0\">\n<contactref element=\"Q2\" pad=\"6\"/>\n<contactref element=\"U2\" pad=\"25\"/>\n<via x=\"39.37\" y=\"33.02\" extent=\"1-16\" drill=\"0.3048\"/>\n<via x=\"49.8475\" y=\"31.115\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"50.4825\" y1=\"31.7675\" x2=\"50.4675\" y2=\"31.7825\" width=\"0\" layer=\"19\" extent=\"1-16\"/>\n<wire x1=\"36.83\" y1=\"30.48\" x2=\"22.92\" y2=\"30.48\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.92\" y1=\"30.48\" x2=\"22.92\" y2=\"30.46\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.37\" y1=\"33.02\" x2=\"36.83\" y2=\"30.48\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.8475\" y1=\"31.115\" x2=\"50.165\" y2=\"31.115\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"50.4825\" y1=\"31.7675\" x2=\"50.4825\" y2=\"31.4325\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"50.4825\" y1=\"31.4325\" x2=\"50.165\" y2=\"31.115\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"39.37\" y1=\"33.02\" x2=\"47.9425\" y2=\"33.02\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"47.9425\" y1=\"33.02\" x2=\"49.8475\" y2=\"31.115\" width=\"0.254\" layer=\"1\"/>\n</signal>\n<signal name=\"DTR\">\n<contactref element=\"R17\" pad=\"1\"/>\n<contactref element=\"Q2\" pad=\"1\"/>\n<contactref element=\"U4\" pad=\"1\"/>\n<wire x1=\"43.4975\" y1=\"26.1747\" x2=\"43.4975\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.4975\" y1=\"29.21\" x2=\"44.1325\" y2=\"29.845\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.1325\" y1=\"29.845\" x2=\"46.355\" y2=\"29.845\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.475\" y1=\"33.02\" x2=\"48.5775\" y2=\"32.9175\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"50.4675\" y1=\"33.6225\" x2=\"49.2825\" y2=\"33.6225\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.2825\" y1=\"33.6225\" x2=\"48.5775\" y2=\"32.9175\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.355\" y1=\"29.845\" x2=\"47.625\" y2=\"31.115\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.625\" y1=\"31.115\" x2=\"47.625\" y2=\"31.965\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.625\" y1=\"31.965\" x2=\"48.5775\" y2=\"32.9175\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"RTS\">\n<contactref element=\"R18\" pad=\"1\"/>\n<contactref element=\"Q2\" pad=\"4\"/>\n<contactref element=\"U4\" pad=\"2\"/>\n<wire x1=\"44.1325\" y1=\"26.1747\" x2=\"44.1325\" y2=\"28.8925\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.1325\" y1=\"28.8925\" x2=\"44.45\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.45\" y1=\"29.21\" x2=\"50.165\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"50.165\" y1=\"29.21\" x2=\"51.7675\" y2=\"30.8125\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.7675\" y1=\"31.7825\" x2=\"51.7675\" y2=\"30.9\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.7675\" y1=\"30.9\" x2=\"51.7675\" y2=\"30.8125\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"53.34\" y1=\"30.9\" x2=\"51.7675\" y2=\"30.9\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$10\">\n<contactref element=\"R17\" pad=\"2\"/>\n<contactref element=\"Q2\" pad=\"5\"/>\n<wire x1=\"51.1175\" y1=\"31.7825\" x2=\"51.1175\" y2=\"31.115\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"51.1175\" y1=\"31.115\" x2=\"50.165\" y2=\"30.1625\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"50.165\" y1=\"30.1625\" x2=\"48.895\" y2=\"30.1625\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"48.5775\" y1=\"31.2175\" x2=\"48.5775\" y2=\"30.48\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"48.5775\" y1=\"30.48\" x2=\"48.895\" y2=\"30.1625\" width=\"0.254\" layer=\"16\"/>\n</signal>\n<signal name=\"N$12\">\n<contactref element=\"R18\" pad=\"2\"/>\n<contactref element=\"Q2\" pad=\"2\"/>\n<wire x1=\"51.1175\" y1=\"33.6225\" x2=\"51.1175\" y2=\"33.02\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.1175\" y1=\"33.02\" x2=\"51.435\" y2=\"32.7025\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.435\" y1=\"32.7025\" x2=\"53.2375\" y2=\"32.7025\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"53.2375\" y1=\"32.7025\" x2=\"53.34\" y2=\"32.6\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"V_USB\">\n<contactref element=\"U1\" pad=\"4\"/>\n<contactref element=\"C19\" pad=\"1\"/>\n<contactref element=\"U4\" pad=\"15\"/>\n<contactref element=\"C14\" pad=\"1\"/>\n<contactref element=\"F1\" pad=\"2\"/>\n<contactref element=\"C15\" pad=\"1\"/>\n<contactref element=\"D3\" pad=\"A\"/>\n<contactref element=\"R7\" pad=\"2\"/>\n<contactref element=\"Q1\" pad=\"1\"/>\n<wire x1=\"46.6725\" y1=\"20.8153\" x2=\"46.6725\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.6725\" y1=\"21.9075\" x2=\"46.355\" y2=\"22.225\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"46.355\" y=\"22.225\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"48.26\" y=\"23.495\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"51.1175\" y1=\"28.8925\" x2=\"50.165\" y2=\"27.94\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"50.165\" y1=\"27.94\" x2=\"50.165\" y2=\"25.4\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"50.165\" y1=\"25.4\" x2=\"48.26\" y2=\"23.495\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"46.6725\" y1=\"20.8153\" x2=\"46.6725\" y2=\"19.5825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.6725\" y1=\"19.5825\" x2=\"47.205\" y2=\"19.05\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.355\" y1=\"22.225\" x2=\"46.99\" y2=\"22.225\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"46.99\" y1=\"22.225\" x2=\"48.26\" y2=\"23.495\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"53.025\" y1=\"17.8101\" x2=\"53.025\" y2=\"17.465\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"47.205\" y1=\"19.05\" x2=\"47.205\" y2=\"18.2\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"47.205\" y1=\"18.2\" x2=\"47.625\" y2=\"17.78\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"47.625\" y1=\"17.78\" x2=\"48.68\" y2=\"17.78\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"48.68\" y1=\"17.78\" x2=\"48.895\" y2=\"17.565\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"48.895\" y1=\"17.565\" x2=\"50.4825\" y2=\"17.565\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"53.025\" y1=\"17.8101\" x2=\"50.7276\" y2=\"17.8101\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"50.7276\" y1=\"17.8101\" x2=\"50.4825\" y2=\"17.565\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"54.61\" y1=\"29.5275\" x2=\"55.88\" y2=\"30.7975\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.88\" y1=\"30.7975\" x2=\"55.88\" y2=\"31.6475\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.88\" y1=\"31.6475\" x2=\"55.9825\" y2=\"31.75\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"51.1175\" y1=\"28.8925\" x2=\"54.4225\" y2=\"28.8925\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.4225\" y1=\"28.8925\" x2=\"54.61\" y2=\"28.705\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"54.61\" y1=\"29.5275\" x2=\"54.61\" y2=\"28.705\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.9825\" y1=\"31.75\" x2=\"55.9825\" y2=\"32.17\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.9825\" y1=\"32.17\" x2=\"57.15\" y2=\"33.3375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.15\" y1=\"33.3375\" x2=\"57.665\" y2=\"33.3375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"58.1\" y1=\"34.8775\" x2=\"58.1\" y2=\"33.7725\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"58.1\" y1=\"33.7725\" x2=\"57.665\" y2=\"33.3375\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"V_BATT\">\n<contactref element=\"JP2\" pad=\"2\"/>\n<contactref element=\"C6\" pad=\"1\"/>\n<contactref element=\"U1\" pad=\"3\"/>\n<contactref element=\"S2\" pad=\"2\"/>\n<wire x1=\"53.025\" y1=\"15.2099\" x2=\"53.025\" y2=\"16.195\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.025\" y1=\"16.195\" x2=\"53.34\" y2=\"16.51\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.34\" y1=\"16.51\" x2=\"55.88\" y2=\"16.51\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.88\" y1=\"16.51\" x2=\"57.15\" y2=\"17.78\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"60.395\" y1=\"16.135\" x2=\"60.9025\" y2=\"16.135\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"60.9025\" y1=\"16.135\" x2=\"63.1825\" y2=\"18.415\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"63.1825\" y1=\"18.415\" x2=\"63.1825\" y2=\"28.2575\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"63.1825\" y1=\"28.2575\" x2=\"60.325\" y2=\"31.115\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.15\" y1=\"17.78\" x2=\"59.69\" y2=\"17.78\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"59.69\" y1=\"17.78\" x2=\"60.325\" y2=\"17.145\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"60.325\" y1=\"17.145\" x2=\"60.325\" y2=\"16.205\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"60.325\" y1=\"16.205\" x2=\"60.395\" y2=\"16.135\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"60.325\" y1=\"31.115\" x2=\"60.325\" y2=\"34.925\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.025\" y1=\"15.2099\" x2=\"51.9976\" y2=\"15.2099\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"51.9976\" y1=\"15.2099\" x2=\"51.7525\" y2=\"15.455\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"S2\" pad=\"1\"/>\n<wire x1=\"59.885\" y1=\"38.195\" x2=\"59.885\" y2=\"39.695\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"59.4675\" y1=\"38.195\" x2=\"59.4675\" y2=\"35.7825\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"59.4675\" y1=\"35.7825\" x2=\"60.325\" y2=\"34.925\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"59.4675\" y1=\"38.195\" x2=\"59.885\" y2=\"38.195\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"N$16\">\n<contactref element=\"R6\" pad=\"2\"/>\n<contactref element=\"U1\" pad=\"5\"/>\n<wire x1=\"54.19\" y1=\"19.3675\" x2=\"54.19\" y2=\"18.5451\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.19\" y1=\"18.5451\" x2=\"54.925\" y2=\"17.8101\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"D-\">\n<contactref element=\"R13\" pad=\"1\"/>\n<contactref element=\"C12\" pad=\"1\"/>\n<wire x1=\"54.19\" y1=\"24.4475\" x2=\"54.19\" y2=\"23.1775\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"J2\" pad=\"A7\"/>\n<contactref element=\"J2\" pad=\"B7\"/>\n<wire x1=\"56.515\" y1=\"23.245\" x2=\"54.2575\" y2=\"23.245\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"54.2575\" y1=\"23.245\" x2=\"54.19\" y2=\"23.1775\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.7375\" y1=\"23.1775\" x2=\"59.055\" y2=\"23.495\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"59.055\" y1=\"23.495\" x2=\"59.055\" y2=\"24.13\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"24.245\" x2=\"57.9\" y2=\"24.245\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.9\" y1=\"24.245\" x2=\"58.1025\" y2=\"24.4475\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.1025\" y1=\"24.4475\" x2=\"58.7375\" y2=\"24.4475\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.7375\" y1=\"24.4475\" x2=\"59.055\" y2=\"24.13\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.7375\" y1=\"23.1775\" x2=\"58.0225\" y2=\"23.1775\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"23.245\" x2=\"57.955\" y2=\"23.245\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.955\" y1=\"23.245\" x2=\"58.0225\" y2=\"23.1775\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"D+\">\n<contactref element=\"R14\" pad=\"1\"/>\n<contactref element=\"C13\" pad=\"1\"/>\n<wire x1=\"54.19\" y1=\"20.6375\" x2=\"54.19\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"J2\" pad=\"B6\" route=\"any\" routetag=\"J1.D+\"/>\n<contactref element=\"J2\" pad=\"A6\" route=\"any\" routetag=\"J1.D+\"/>\n<wire x1=\"56.515\" y1=\"22.745\" x2=\"55.4475\" y2=\"22.745\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"55.4475\" y1=\"22.745\" x2=\"54.61\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"54.19\" y1=\"21.9075\" x2=\"54.61\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"23.745\" x2=\"58.3525\" y2=\"23.745\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.3525\" y1=\"23.745\" x2=\"58.42\" y2=\"23.8125\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"58.42\" y=\"23.8125\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"58.42\" y1=\"23.8125\" x2=\"58.42\" y2=\"22.5425\" width=\"0.3048\" layer=\"1\"/>\n<via x=\"58.42\" y=\"22.5425\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"58.42\" y1=\"22.5425\" x2=\"57.8575\" y2=\"22.5425\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"22.745\" x2=\"57.655\" y2=\"22.745\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.655\" y1=\"22.745\" x2=\"57.8575\" y2=\"22.5425\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"VUSB-RAW\">\n<contactref element=\"C11\" pad=\"1\"/>\n<contactref element=\"F1\" pad=\"1\"/>\n<wire x1=\"54.61\" y1=\"25.905\" x2=\"52.62\" y2=\"25.905\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"52.62\" y1=\"25.905\" x2=\"52.3875\" y2=\"26.1375\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"J2\" pad=\"VBUS2\"/>\n<contactref element=\"J2\" pad=\"VBUS1\"/>\n<wire x1=\"56.515\" y1=\"25.945\" x2=\"54.65\" y2=\"25.945\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.65\" y1=\"25.945\" x2=\"54.61\" y2=\"25.905\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"21.045\" x2=\"55.6525\" y2=\"21.045\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"55.6525\" y1=\"21.045\" x2=\"55.245\" y2=\"20.6375\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"55.245\" y1=\"20.6375\" x2=\"55.245\" y2=\"19.3675\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"55.245\" y1=\"19.3675\" x2=\"55.5625\" y2=\"19.05\" width=\"0.4064\" layer=\"16\"/>\n<via x=\"55.5625\" y=\"19.05\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"54.9275\" y=\"27.305\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"54.9275\" y1=\"27.305\" x2=\"54.9275\" y2=\"26.2225\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"54.9275\" y1=\"26.2225\" x2=\"54.61\" y2=\"25.905\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"54.9275\" y1=\"19.685\" x2=\"54.9275\" y2=\"27.305\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"55.5625\" y1=\"19.05\" x2=\"54.9275\" y2=\"19.685\" width=\"0.508\" layer=\"1\"/>\n</signal>\n<signal name=\"N$7\">\n<contactref element=\"U4\" pad=\"12\"/>\n<contactref element=\"R13\" pad=\"2\"/>\n<wire x1=\"48.5775\" y1=\"20.8153\" x2=\"48.5775\" y2=\"22.225\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"52.49\" y1=\"23.1775\" x2=\"49.53\" y2=\"23.1775\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.53\" y1=\"23.1775\" x2=\"48.5775\" y2=\"22.225\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$8\">\n<contactref element=\"U4\" pad=\"11\"/>\n<contactref element=\"R14\" pad=\"2\"/>\n<wire x1=\"49.2125\" y1=\"20.8153\" x2=\"49.2125\" y2=\"21.59\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.2125\" y1=\"21.59\" x2=\"49.53\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.53\" y1=\"21.9075\" x2=\"52.49\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"3.3V_F\">\n<contactref element=\"C16\" pad=\"1\"/>\n<contactref element=\"U4\" pad=\"14\"/>\n<contactref element=\"U4\" pad=\"13\"/>\n<contactref element=\"U4\" pad=\"3\"/>\n<wire x1=\"44.7675\" y1=\"26.1747\" x2=\"44.7675\" y2=\"24.4475\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.9425\" y1=\"20.8153\" x2=\"47.3075\" y2=\"20.8153\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.7675\" y1=\"26.1747\" x2=\"44.7675\" y2=\"27.52\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.7675\" y1=\"27.52\" x2=\"45.1875\" y2=\"27.94\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.3075\" y1=\"20.8153\" x2=\"47.3075\" y2=\"22.86\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.3075\" y1=\"22.86\" x2=\"46.6725\" y2=\"23.495\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.6725\" y1=\"23.495\" x2=\"45.72\" y2=\"23.495\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.72\" y1=\"23.495\" x2=\"44.7675\" y2=\"24.4475\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$4\">\n<contactref element=\"Q1\" pad=\"3\"/>\n<contactref element=\"S2\" pad=\"3\"/>\n<wire x1=\"58.1025\" y1=\"37.7825\" x2=\"58.1025\" y2=\"40.3225\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"58.1025\" y1=\"40.3225\" x2=\"59.885\" y2=\"42.105\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"59.885\" y1=\"42.695\" x2=\"59.885\" y2=\"42.105\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.15\" y1=\"36.9775\" x2=\"57.2975\" y2=\"36.9775\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.2975\" y1=\"36.9775\" x2=\"58.1025\" y2=\"37.7825\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"SHARP_SCK\">\n<contactref element=\"K1\" pad=\"1\"/>\n<contactref element=\"U2\" pad=\"13\"/>\n<wire x1=\"34.25\" y1=\"17.6\" x2=\"34.25\" y2=\"22.5025\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"34.25\" y1=\"22.5025\" x2=\"39.0525\" y2=\"27.305\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.0525\" y1=\"27.305\" x2=\"39.0525\" y2=\"31.115\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.0525\" y1=\"31.115\" x2=\"39.6875\" y2=\"31.75\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.6875\" y1=\"31.75\" x2=\"40.9\" y2=\"31.75\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.9\" y1=\"31.75\" x2=\"40.92\" y2=\"31.73\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"SHARP_CS\">\n<contactref element=\"K1\" pad=\"3\"/>\n<contactref element=\"U2\" pad=\"23\"/>\n<wire x1=\"33.25\" y1=\"17.6\" x2=\"33.25\" y2=\"20.09\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"33.25\" y1=\"20.09\" x2=\"27.475\" y2=\"25.865\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"27.475\" y1=\"28.97\" x2=\"27.475\" y2=\"25.865\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"SHARP_EXTMODE\">\n<contactref element=\"K1\" pad=\"8\"/>\n<wire x1=\"30.75\" y1=\"17.6\" x2=\"30.75\" y2=\"19.7325\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"30.75\" y1=\"19.7325\" x2=\"21.2725\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"U2\" pad=\"26\"/>\n<wire x1=\"22.92\" y1=\"31.73\" x2=\"21.8875\" y2=\"31.73\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"21.8875\" y1=\"31.73\" x2=\"21.2725\" y2=\"31.115\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"21.2725\" y1=\"31.115\" x2=\"21.2725\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"CRG_STAT\">\n<contactref element=\"U1\" pad=\"1\"/>\n<contactref element=\"U2\" pad=\"4\"/>\n<wire x1=\"40.92\" y1=\"43.16\" x2=\"42.2475\" y2=\"43.16\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.3075\" y1=\"41.275\" x2=\"47.9425\" y2=\"40.64\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.9425\" y1=\"40.64\" x2=\"47.9425\" y2=\"37.1475\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.9425\" y1=\"37.1475\" x2=\"49.53\" y2=\"35.56\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"49.53\" y=\"35.56\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"49.53\" y1=\"35.56\" x2=\"53.34\" y2=\"31.75\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"53.34\" y1=\"31.75\" x2=\"53.34\" y2=\"17.78\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"53.34\" y1=\"17.78\" x2=\"55.88\" y2=\"15.24\" width=\"0.3048\" layer=\"1\"/>\n<via x=\"55.88\" y=\"15.24\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"55.88\" y1=\"15.24\" x2=\"54.9551\" y2=\"15.24\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"54.9551\" y1=\"15.24\" x2=\"54.925\" y2=\"15.2099\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.3075\" y1=\"41.275\" x2=\"44.7675\" y2=\"41.275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.7675\" y1=\"41.275\" x2=\"43.815\" y2=\"42.2275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.815\" y1=\"42.2275\" x2=\"43.18\" y2=\"42.2275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.18\" y1=\"42.2275\" x2=\"42.2475\" y2=\"43.16\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"SHARP_MOSI\">\n<contactref element=\"K1\" pad=\"2\"/>\n<contactref element=\"U2\" pad=\"16\"/>\n<wire x1=\"36.365\" y1=\"28.97\" x2=\"36.365\" y2=\"27.7925\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"36.365\" y1=\"27.7925\" x2=\"33.75\" y2=\"25.1775\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"33.75\" y1=\"17.6\" x2=\"33.75\" y2=\"25.1775\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"SHARP_VCOM\">\n<contactref element=\"U2\" pad=\"24\"/>\n<contactref element=\"K1\" pad=\"4\"/>\n<wire x1=\"26.205\" y1=\"28.97\" x2=\"26.205\" y2=\"25.865\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"26.205\" y1=\"25.865\" x2=\"32.75\" y2=\"19.32\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"32.75\" y1=\"17.6\" x2=\"32.75\" y2=\"19.32\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"VSS\">\n</signal>\n<signal name=\"VDD\">\n</signal>\n<signal name=\"5V\">\n<contactref element=\"K1\" pad=\"6\"/>\n<contactref element=\"K1\" pad=\"7\"/>\n<contactref element=\"K1\" pad=\"5\"/>\n<wire x1=\"31.25\" y1=\"17.6\" x2=\"31.75\" y2=\"17.6\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"32.25\" y1=\"17.6\" x2=\"31.75\" y2=\"17.6\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"31.75\" y1=\"17.6\" x2=\"31.75\" y2=\"15.24\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"31.75\" y1=\"15.24\" x2=\"33.655\" y2=\"13.335\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"C4\" pad=\"1\"/>\n<contactref element=\"U$1\" pad=\"5\"/>\n<contactref element=\"C8\" pad=\"2\"/>\n<contactref element=\"R5\" pad=\"1\"/>\n<wire x1=\"33.655\" y1=\"13.335\" x2=\"37.7825\" y2=\"13.335\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"37.7825\" y1=\"13.335\" x2=\"38.1\" y2=\"13.6525\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"41.91\" y1=\"15.9004\" x2=\"41.91\" y2=\"16.6125\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"39.37\" y1=\"17.36\" x2=\"41.1625\" y2=\"17.36\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"41.1625\" y1=\"17.36\" x2=\"41.91\" y2=\"16.6125\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"38.735\" y1=\"19.1525\" x2=\"37.895\" y2=\"19.1525\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"37.895\" y1=\"19.1525\" x2=\"37.045\" y2=\"20.0025\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"39.37\" y1=\"17.36\" x2=\"38.6325\" y2=\"17.36\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"38.6325\" y1=\"17.36\" x2=\"38.1\" y2=\"16.8275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"38.1\" y1=\"16.8275\" x2=\"38.1\" y2=\"13.6525\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.37\" y1=\"17.36\" x2=\"39.37\" y2=\"18.5175\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"39.37\" y1=\"18.5175\" x2=\"38.735\" y2=\"19.1525\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_A\">\n<contactref element=\"SW1\" pad=\"B'\"/>\n<contactref element=\"SW1\" pad=\"B\"/>\n<contactref element=\"R2\" pad=\"2\"/>\n<wire x1=\"41.765\" y1=\"7.5\" x2=\"47.965\" y2=\"7.5\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"47.9425\" y1=\"7.5225\" x2=\"47.965\" y2=\"7.5\" width=\"0.3048\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"9\"/>\n<wire x1=\"40.92\" y1=\"36.81\" x2=\"41.93\" y2=\"36.81\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"44.1325\" y=\"17.4625\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"44.1325\" y1=\"17.4625\" x2=\"40.9575\" y2=\"20.6375\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.9575\" y1=\"20.6375\" x2=\"40.9575\" y2=\"28.575\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"41.93\" y1=\"36.81\" x2=\"42.8625\" y2=\"35.8775\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.8625\" y1=\"35.8775\" x2=\"42.8625\" y2=\"32.805\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.8625\" y1=\"32.805\" x2=\"42.965\" y2=\"32.7025\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.965\" y1=\"30.5825\" x2=\"40.9575\" y2=\"28.575\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.965\" y1=\"30.5825\" x2=\"42.965\" y2=\"32.7025\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.9425\" y1=\"7.5225\" x2=\"48.1625\" y2=\"7.5225\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"49.8475\" y1=\"11.7475\" x2=\"44.1325\" y2=\"17.4625\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"48.1625\" y1=\"7.5225\" x2=\"48.1625\" y2=\"8.475\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"48.1625\" y1=\"8.475\" x2=\"49.8475\" y2=\"10.16\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"49.8475\" y1=\"10.16\" x2=\"49.8475\" y2=\"11.7475\" width=\"0.3048\" layer=\"1\"/>\n</signal>\n<signal name=\"PBT_B\">\n<contactref element=\"SW2\" pad=\"B\"/>\n<contactref element=\"SW2\" pad=\"B'\"/>\n<contactref element=\"R4\" pad=\"2\"/>\n<wire x1=\"59.6\" y1=\"7.5\" x2=\"53.4\" y2=\"7.5\" width=\"0.3048\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"8\"/>\n<wire x1=\"40.92\" y1=\"38.08\" x2=\"41.93\" y2=\"38.08\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.2125\" y1=\"13.6525\" x2=\"46.0375\" y2=\"16.8275\" width=\"0.3048\" layer=\"1\"/>\n<via x=\"46.0375\" y=\"16.8275\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"41.5925\" y1=\"21.2725\" x2=\"41.5925\" y2=\"28.2575\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"41.5925\" y1=\"28.2575\" x2=\"43.815\" y2=\"30.48\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"53.4\" y1=\"7.5\" x2=\"53.4\" y2=\"8.5125\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"53.4\" y1=\"8.5125\" x2=\"51.7525\" y2=\"10.16\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"51.7525\" y1=\"10.16\" x2=\"51.7525\" y2=\"13.0175\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"51.7525\" y1=\"13.0175\" x2=\"51.1175\" y2=\"13.6525\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"51.1175\" y1=\"13.6525\" x2=\"49.2125\" y2=\"13.6525\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"41.5925\" y1=\"21.2725\" x2=\"46.0375\" y2=\"16.8275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"41.93\" y1=\"38.08\" x2=\"44.7675\" y2=\"35.2425\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.7675\" y1=\"35.2425\" x2=\"46.0375\" y2=\"35.2425\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.2525\" y1=\"34.29\" x2=\"46.2525\" y2=\"35.0275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.2525\" y1=\"35.0275\" x2=\"46.0375\" y2=\"35.2425\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.085\" y1=\"30.48\" x2=\"43.815\" y2=\"30.48\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.2525\" y1=\"34.29\" x2=\"46.2525\" y2=\"31.6475\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.2525\" y1=\"31.6475\" x2=\"45.085\" y2=\"30.48\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_CENT\">\n<contactref element=\"S1\" pad=\"CTR\"/>\n<wire x1=\"10.64886875\" y1=\"7.851128125\" x2=\"8.89\" y2=\"9.609996875\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"8.89\" y1=\"9.609996875\" x2=\"8.89\" y2=\"12.7\" width=\"0.254\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"33\"/>\n<via x=\"8.89\" y=\"12.7\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"8.89\" y1=\"12.7\" x2=\"8.89\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.92\" y1=\"40.62\" x2=\"20.3\" y2=\"40.62\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"20.3\" y1=\"40.62\" x2=\"8.89\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_RIGHT\">\n<contactref element=\"S1\" pad=\"B\"/>\n<wire x1=\"13.335\" y1=\"9.525\" x2=\"10.16\" y2=\"12.7\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"13.335\" y1=\"9.525\" x2=\"13.335\" y2=\"6.0325\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"13.335\" y1=\"6.0325\" x2=\"14.2875\" y2=\"5.08\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"16.341078125\" y1=\"4.13881875\" x2=\"15.399896875\" y2=\"5.08\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"15.399896875\" y1=\"5.08\" x2=\"14.2875\" y2=\"5.08\" width=\"0.254\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"30\"/>\n<via x=\"10.16\" y=\"12.7\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"10.16\" y1=\"12.7\" x2=\"10.16\" y2=\"26.035\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"10.16\" y1=\"26.035\" x2=\"20.955\" y2=\"36.83\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"20.955\" y1=\"36.83\" x2=\"22.92\" y2=\"36.83\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.92\" y1=\"36.83\" x2=\"22.92\" y2=\"36.81\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_LEFT\">\n<contactref element=\"S1\" pad=\"C\"/>\n<wire x1=\"9.65891875\" y1=\"6.861178125\" x2=\"8.255\" y2=\"8.265096875\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"8.255\" y1=\"8.265096875\" x2=\"8.255\" y2=\"13.6525\" width=\"0.254\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"36\"/>\n<via x=\"8.255\" y=\"13.6525\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"8.255\" y1=\"13.6525\" x2=\"8.255\" y2=\"33.3375\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"8.255\" y1=\"33.3375\" x2=\"19.3675\" y2=\"44.45\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"19.3675\" y1=\"44.45\" x2=\"22.9\" y2=\"44.45\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.9\" y1=\"44.45\" x2=\"22.92\" y2=\"44.43\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_DOWN\">\n<contactref element=\"S1\" pad=\"D\"/>\n<wire x1=\"9.2075\" y1=\"5.3975\" x2=\"7.62\" y2=\"6.985\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"7.62\" y1=\"6.985\" x2=\"7.62\" y2=\"12.7\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"14.361178125\" y1=\"2.15891875\" x2=\"13.335\" y2=\"3.185096875\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"13.335\" y1=\"3.185096875\" x2=\"13.335\" y2=\"4.445\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"13.335\" y1=\"4.445\" x2=\"12.3825\" y2=\"5.3975\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"12.3825\" y1=\"5.3975\" x2=\"9.2075\" y2=\"5.3975\" width=\"0.254\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"37\"/>\n<via x=\"7.62\" y=\"12.7\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"7.62\" y1=\"12.7\" x2=\"7.62\" y2=\"33.655\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"7.62\" y1=\"33.655\" x2=\"19.685\" y2=\"45.72\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"19.685\" y1=\"45.72\" x2=\"22.9\" y2=\"45.72\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.9\" y1=\"45.72\" x2=\"22.92\" y2=\"45.7\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_UP\">\n<contactref element=\"S1\" pad=\"A\"/>\n<wire x1=\"11.63881875\" y1=\"8.841078125\" x2=\"9.525\" y2=\"10.954896875\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"9.525\" y1=\"10.954896875\" x2=\"9.525\" y2=\"13.6525\" width=\"0.254\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"31\"/>\n<via x=\"9.525\" y=\"13.6525\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"9.525\" y1=\"13.6525\" x2=\"9.525\" y2=\"26.3525\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.92\" y1=\"38.08\" x2=\"21.2525\" y2=\"38.08\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"21.2525\" y1=\"38.08\" x2=\"9.525\" y2=\"26.3525\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$5\">\n<contactref element=\"D3\" pad=\"C\"/>\n<contactref element=\"Q1\" pad=\"2\"/>\n<contactref element=\"R1\" pad=\"2\"/>\n<wire x1=\"54.705\" y1=\"34.805\" x2=\"54.61\" y2=\"34.71\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"56.2\" y1=\"34.8775\" x2=\"54.7775\" y2=\"34.8775\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"54.7775\" y1=\"34.8775\" x2=\"54.61\" y2=\"34.71\" width=\"0.4064\" layer=\"16\"/>\n<contactref element=\"R10\" pad=\"2\"/>\n<wire x1=\"43.815\" y1=\"38.2025\" x2=\"43.815\" y2=\"37.465\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.815\" y1=\"37.465\" x2=\"45.4025\" y2=\"35.8775\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.4025\" y1=\"35.8775\" x2=\"46.6725\" y2=\"35.8775\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.6725\" y1=\"35.8775\" x2=\"47.9425\" y2=\"34.6075\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"52.07\" y=\"35.2425\" extent=\"1-16\" drill=\"0.254\"/>\n<wire x1=\"52.07\" y1=\"35.2425\" x2=\"53.0225\" y2=\"34.29\" width=\"0.3048\" layer=\"1\"/>\n<via x=\"53.0225\" y=\"34.29\" extent=\"1-16\" drill=\"0.254\"/>\n<wire x1=\"53.0225\" y1=\"34.29\" x2=\"54.19\" y2=\"34.29\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"54.19\" y1=\"34.29\" x2=\"54.61\" y2=\"34.71\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.9425\" y1=\"34.6075\" x2=\"51.435\" y2=\"34.6075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.435\" y1=\"34.6075\" x2=\"52.07\" y2=\"35.2425\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"54.61\" y1=\"34.71\" x2=\"54.61\" y2=\"33.775\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.365\" y1=\"33.3375\" x2=\"55.0475\" y2=\"33.3375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.0475\" y1=\"33.3375\" x2=\"54.61\" y2=\"33.775\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"N$2\">\n<contactref element=\"U$1\" pad=\"1\"/>\n<contactref element=\"L1\" pad=\"2\"/>\n<wire x1=\"48.26\" y1=\"13.1875\" x2=\"42.9719\" y2=\"13.1875\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"42.9719\" y1=\"13.1875\" x2=\"42.8498\" y2=\"13.3096\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"B_VFB\">\n<contactref element=\"U$1\" pad=\"4\"/>\n<contactref element=\"R9\" pad=\"1\"/>\n<contactref element=\"R5\" pad=\"2\"/>\n<wire x1=\"39.37\" y1=\"15.66\" x2=\"39.37\" y2=\"14.185\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.9702\" y1=\"15.9004\" x2=\"39.6104\" y2=\"15.9004\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"39.6104\" y1=\"15.9004\" x2=\"39.37\" y2=\"15.66\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"N$3\">\n<contactref element=\"C7\" pad=\"1\"/>\n<contactref element=\"R1\" pad=\"1\"/>\n<contactref element=\"U3\" pad=\"1\"/>\n<contactref element=\"U3\" pad=\"3\"/>\n<wire x1=\"54.0051\" y1=\"40.32\" x2=\"53.3375\" y2=\"40.32\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"53.3375\" y1=\"40.32\" x2=\"52.705\" y2=\"39.6875\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"52.705\" y1=\"39.6875\" x2=\"52.705\" y2=\"39.0525\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"54.0051\" y1=\"38.42\" x2=\"53.3375\" y2=\"38.42\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"53.3375\" y1=\"38.42\" x2=\"52.705\" y2=\"39.0525\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"54.0051\" y1=\"38.42\" x2=\"54.0051\" y2=\"37.0149\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"54.0051\" y1=\"37.0149\" x2=\"54.61\" y2=\"36.41\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"54.0051\" y1=\"40.32\" x2=\"55.83\" y2=\"40.32\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"55.83\" y1=\"40.32\" x2=\"55.88\" y2=\"40.27\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"SCL\">\n<contactref element=\"U$2\" pad=\"23\"/>\n<contactref element=\"R12\" pad=\"2\"/>\n<wire x1=\"55.0366\" y1=\"45.5929\" x2=\"57.139425\" y2=\"45.5929\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.139425\" y1=\"45.5929\" x2=\"57.9121\" y2=\"45.5929\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.9121\" y1=\"45.5929\" x2=\"58.42\" y2=\"45.085\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.42\" y1=\"45.085\" x2=\"58.42\" y2=\"42.2275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.42\" y1=\"42.2275\" x2=\"57.785\" y2=\"41.5925\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.785\" y1=\"41.5925\" x2=\"57.0475\" y2=\"41.5925\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"U2\" pad=\"10\"/>\n<via x=\"57.139425\" y=\"45.5929\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"48.7679\" y1=\"45.9104\" x2=\"43.815\" y2=\"40.9575\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"43.815\" y1=\"40.9575\" x2=\"43.815\" y2=\"39.37\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"43.815\" y1=\"39.37\" x2=\"42.545\" y2=\"38.1\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"42.545\" y1=\"38.1\" x2=\"39.37\" y2=\"38.1\" width=\"0.3048\" layer=\"1\"/>\n<via x=\"39.37\" y=\"38.1\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"40.005\" y1=\"35.56\" x2=\"40.9\" y2=\"35.56\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.9\" y1=\"35.56\" x2=\"40.92\" y2=\"35.54\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.37\" y1=\"38.1\" x2=\"39.6875\" y2=\"37.7825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.6875\" y1=\"37.7825\" x2=\"39.6875\" y2=\"35.8775\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.6875\" y1=\"35.8775\" x2=\"40.005\" y2=\"35.56\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.7679\" y1=\"45.9104\" x2=\"56.821925\" y2=\"45.9104\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"56.821925\" y1=\"45.9104\" x2=\"57.139425\" y2=\"45.5929\" width=\"0.3048\" layer=\"1\"/>\n</signal>\n<signal name=\"SDA\">\n<contactref element=\"U$2\" pad=\"24\"/>\n<contactref element=\"R15\" pad=\"2\"/>\n<wire x1=\"55.0366\" y1=\"45.0883\" x2=\"56.5117\" y2=\"45.0883\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"56.5117\" y1=\"45.0883\" x2=\"57.15\" y2=\"44.45\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"U2\" pad=\"11\"/>\n<via x=\"57.15\" y=\"44.45\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"57.15\" y1=\"44.45\" x2=\"56.8325\" y2=\"44.7675\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"48.895\" y1=\"45.085\" x2=\"44.7675\" y2=\"40.9575\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"44.7675\" y1=\"40.9575\" x2=\"44.7675\" y2=\"39.37\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"44.7675\" y1=\"39.37\" x2=\"42.545\" y2=\"37.1475\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"42.545\" y1=\"37.1475\" x2=\"38.735\" y2=\"37.1475\" width=\"0.3048\" layer=\"1\"/>\n<via x=\"38.735\" y=\"37.1475\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"38.735\" y1=\"37.1475\" x2=\"38.735\" y2=\"35.2425\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"38.735\" y1=\"35.2425\" x2=\"39.6875\" y2=\"34.29\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.6875\" y1=\"34.29\" x2=\"40.9\" y2=\"34.29\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.9\" y1=\"34.29\" x2=\"40.92\" y2=\"34.27\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.15\" y1=\"44.45\" x2=\"57.15\" y2=\"43.2825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.15\" y1=\"43.2825\" x2=\"57.0475\" y2=\"43.18\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.895\" y1=\"45.085\" x2=\"56.515\" y2=\"45.085\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"56.515\" y1=\"45.085\" x2=\"57.15\" y2=\"44.45\" width=\"0.3048\" layer=\"1\"/>\n</signal>\n<signal name=\"N$17\">\n<contactref element=\"U$2\" pad=\"20\"/>\n<contactref element=\"C18\" pad=\"1\"/>\n<wire x1=\"55.0366\" y1=\"47.1346\" x2=\"56.0246\" y2=\"47.1346\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"56.0246\" y1=\"47.1346\" x2=\"56.78\" y2=\"47.89\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"56.78\" y1=\"49.53\" x2=\"56.78\" y2=\"47.89\" width=\"0.254\" layer=\"16\"/>\n</signal>\n<signal name=\"N$18\">\n<contactref element=\"U$2\" pad=\"10\"/>\n<contactref element=\"C20\" pad=\"1\"/>\n<wire x1=\"50.3334\" y1=\"46.6325\" x2=\"47.45\" y2=\"46.6325\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"47.45\" y1=\"46.6325\" x2=\"47.3075\" y2=\"46.775\" width=\"0.254\" layer=\"16\"/>\n</signal>\n<signal name=\"MPU_INT\">\n<contactref element=\"U$2\" pad=\"12\"/>\n<contactref element=\"U2\" pad=\"6\"/>\n<wire x1=\"40.92\" y1=\"40.62\" x2=\"42.2075\" y2=\"40.62\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.2075\" y1=\"40.62\" x2=\"42.2275\" y2=\"40.64\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"42.2275\" y=\"40.64\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"42.2275\" y1=\"40.64\" x2=\"42.2275\" y2=\"41.275\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"42.2275\" y1=\"41.275\" x2=\"48.895\" y2=\"47.9425\" width=\"0.3048\" layer=\"1\"/>\n<via x=\"48.895\" y=\"47.9425\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"50.3334\" y1=\"47.6417\" x2=\"49.1958\" y2=\"47.6417\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"49.1958\" y1=\"47.6417\" x2=\"48.895\" y2=\"47.9425\" width=\"0.254\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_S\">\n<contactref element=\"R16\" pad=\"1\"/>\n<contactref element=\"U2\" pad=\"7\"/>\n<wire x1=\"40.92\" y1=\"39.35\" x2=\"42.525\" y2=\"39.35\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"42.525\" y1=\"39.35\" x2=\"42.545\" y2=\"39.37\" width=\"0.254\" layer=\"16\"/>\n<via x=\"42.545\" y=\"39.37\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"42.545\" y1=\"39.37\" x2=\"43.18\" y2=\"40.005\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"43.18\" y1=\"40.005\" x2=\"43.18\" y2=\"41.275\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"43.18\" y1=\"41.275\" x2=\"48.5775\" y2=\"46.6725\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"48.5775\" y1=\"46.6725\" x2=\"57.15\" y2=\"46.6725\" width=\"0.254\" layer=\"1\"/>\n<via x=\"57.15\" y=\"46.6725\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"57.15\" y1=\"46.6725\" x2=\"59.055\" y2=\"46.6725\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"59.055\" y1=\"46.6725\" x2=\"61.175\" y2=\"48.7925\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"61.175\" y1=\"49.53\" x2=\"61.175\" y2=\"48.7925\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"61.175\" y1=\"49.53\" x2=\"61.175\" y2=\"50.6975\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"61.175\" y1=\"50.6975\" x2=\"61.855\" y2=\"51.3775\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"SW3\" pad=\"1\"/>\n<contactref element=\"SW3\" pad=\"3\"/>\n<wire x1=\"56.255\" y1=\"52.49\" x2=\"61.855\" y2=\"52.49\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"61.855\" y1=\"51.3775\" x2=\"61.855\" y2=\"52.49\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$9\">\n<contactref element=\"J2\" pad=\"A5\"/>\n<contactref element=\"R19\" pad=\"1\"/>\n<wire x1=\"56.515\" y1=\"24.745\" x2=\"57.4475\" y2=\"24.745\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.4475\" y1=\"24.745\" x2=\"57.785\" y2=\"25.0825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.785\" y1=\"25.0825\" x2=\"58.42\" y2=\"25.0825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.42\" y1=\"25.0825\" x2=\"59.055\" y2=\"25.7175\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"59.055\" y1=\"25.7175\" x2=\"59.055\" y2=\"29.1075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"59.055\" y1=\"29.1075\" x2=\"58.9525\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$11\">\n<contactref element=\"J2\" pad=\"B5\"/>\n<contactref element=\"R3\" pad=\"1\"/>\n<wire x1=\"56.515\" y1=\"21.745\" x2=\"58.8925\" y2=\"21.745\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.8925\" y1=\"21.745\" x2=\"60.0075\" y2=\"22.86\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"60.0075\" y1=\"22.86\" x2=\"60.0075\" y2=\"30.1625\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"60.0075\" y1=\"30.1625\" x2=\"59.69\" y2=\"30.48\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"59.69\" y1=\"30.48\" x2=\"58.9525\" y2=\"30.48\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n</signals>\n<errors>\n<approved hash=\"7,40,6e006e786e546e2c\"/>\n<approved hash=\"7,40,9567280129c9af57\"/>\n<approved hash=\"7,40,5566e81149d98f56\"/>\n<approved hash=\"19,16,21dae820e67e2f84\"/>\n<approved hash=\"19,16,3cd996239865329f\"/>\n<approved hash=\"7,40,3140003801d230aa\"/>\n<approved hash=\"7,40,23028efc0ca09fa6\"/>\n<approved hash=\"7,40,b5669139ac77b6d0\"/>\n<approved hash=\"7,40,310000780052312a\"/>\n<approved hash=\"7,40,62023eff2d231a26\"/>\n<approved hash=\"7,40,0566d03a29f49750\"/>\n<approved hash=\"19,16,6d7f8785843e6ec4\"/>\n<approved hash=\"19,16,697abb80b8386ac2\"/>\n<approved hash=\"19,16,6cf8be02bef46c0e\"/>\n<approved hash=\"19,16,bd7e97849423bed9\"/>\n<approved hash=\"19,16,b8fc920692efb815\"/>\n<approved hash=\"7,40,c35006280636c34e\"/>\n<approved hash=\"7,40,4908f688b1ce34b6\"/>\n<approved hash=\"7,40,22f06ee99355e5b4\"/>\n<approved hash=\"7,40,c36c06140676c30e\"/>\n<approved hash=\"7,40,228380a883051fd6\"/>\n<approved hash=\"7,40,311800600075310d\"/>\n<approved hash=\"7,40,315800200035314d\"/>\n<approved hash=\"7,40,b50e9f8522c536b6\"/>\n<approved hash=\"7,40,050ede86a7461736\"/>\n<approved hash=\"7,40,638330aba2869a56\"/>\n<approved hash=\"7,40,0908b408d68e14f6\"/>\n<approved hash=\"7,40,c92d096e896e492d\"/>\n<approved hash=\"7,40,1be3bc48cc2f1e9a\"/>\n<approved hash=\"7,40,60702ee9b31582f4\"/>\n<approved hash=\"7,40,b2e5f225722532e5\"/>\n<approved hash=\"7,40,49bd08fd88fdc9bd\"/>\n<approved hash=\"7,40,1db0d2f052f09db0\"/>\n<approved hash=\"5,16,f4e760b2a09a0456\"/>\n<approved hash=\"7,40,311c00640046313e\"/>\n<approved hash=\"7,40,2280a1a522099fd4\"/>\n<approved hash=\"7,40,b508fe82c334b646\"/>\n<approved hash=\"7,40,315c002400c631be\"/>\n<approved hash=\"7,40,638011a6038a1a54\"/>\n<approved hash=\"7,40,0508bf8146b797c6\"/>\n<approved hash=\"7,40,ee7cfe04fe97eeef\"/>\n<approved hash=\"7,40,204280beb395ab42\"/>\n<approved hash=\"7,40,20c6839030b22bfa\"/>\n<approved hash=\"7,40,e068fb13bbd518b0\"/>\n<approved hash=\"7,40,e0e8f80038f69835\"/>\n<approved hash=\"7,40,ee7c3e043e96eeee\"/>\n<approved hash=\"5,16,c11ac8950fa5192d\"/>\n<approved hash=\"5,16,a460a3b4a19c37d0\"/>\n<approved hash=\"5,16,cd7cf468a290e7ba\"/>\n<approved hash=\"7,40,26ce6d6c98056b82\"/>\n<approved hash=\"7,40,ebb1f449f46aeb92\"/>\n<approved hash=\"7,40,1d5a4fb20b534bbc\"/>\n<approved hash=\"7,40,7f678ce064d22f70\"/>\n<approved hash=\"7,40,26cc6d8858e2ab40\"/>\n<approved hash=\"7,40,ff660cc024366f76\"/>\n<approved hash=\"7,40,03ce0036001503ed\"/>\n<approved hash=\"7,40,8191c0ee40ee0191\"/>\n<approved hash=\"7,40,e34575553050e669\"/>\n<approved hash=\"7,40,203360f3e0f3a033\"/>\n<approved hash=\"7,40,e1dc04240414e1ec\"/>\n<approved hash=\"7,40,23ce572d6d47a182\"/>\n<approved hash=\"7,40,242c4dbe77f4a640\"/>\n<approved hash=\"7,40,e1fe040604f4e10c\"/>\n<approved hash=\"7,40,24fc44447e2ea6bc\"/>\n<approved hash=\"7,40,df7207fdf8cb986e\"/>\n<approved hash=\"7,40,e1fc04040496e16e\"/>\n<approved hash=\"7,40,24c2574bed38265a\"/>\n<approved hash=\"7,40,d86014b4eb829f70\"/>\n<approved hash=\"7,40,24444b7ef11f2638\"/>\n<approved hash=\"7,40,dff608dc77c618f1\"/>\n<approved hash=\"7,40,df6014176bf1186d\"/>\n<approved hash=\"7,40,24664e91f492261a\"/>\n<approved hash=\"7,40,dfe80d31727718d1\"/>\n<approved hash=\"7,40,df660e03f1d59896\"/>\n<approved hash=\"7,40,e1dc04240417e1ef\"/>\n<approved hash=\"7,40,e1fe040604f7e10f\"/>\n<approved hash=\"7,40,e1fc04040495e16d\"/>\n<approved hash=\"4,16,bb640f4010adac56\"/>\n<approved hash=\"4,16,20fb32969bcebf34\"/>\n<approved hash=\"4,16,467846a631780389\"/>\n<approved hash=\"4,16,66b22591e0a0dee0\"/>\n<approved hash=\"4,16,339f820aad4fad08\"/>\n<approved hash=\"19,16,721eb824bcc076fa\"/>\n<approved hash=\"19,16,71acbb96ba187022\"/>\n<approved hash=\"19,16,3233b809bdd837e2\"/>\n<approved hash=\"3,16,5b681d289d25db65\"/>\n<approved hash=\"3,16,16b683e903e396bc\"/>\n<approved hash=\"3,16,917501b581bd117d\"/>\n<approved hash=\"3,16,d0b5c6f446fd50bc\"/>\n<approved hash=\"3,16,d375c7b547bf537f\"/>\n<approved hash=\"3,16,d231c472447f523c\"/>\n<approved hash=\"3,16,6e71c531453cee7c\"/>\n<approved hash=\"3,16,d1b1c9f049fc51bd\"/>\n<approved hash=\"3,16,5171c8b148bdd17d\"/>\n<approved hash=\"3,16,91b608f188fd11ba\"/>\n<approved hash=\"3,16,9f754b35cb331f73\"/>\n<approved hash=\"3,16,107f17bf97ba907a\"/>\n<approved hash=\"3,16,41b48a750a72c1b3\"/>\n<approved hash=\"3,16,51b955f8d5fad1bb\"/>\n<approved hash=\"3,16,02f48b340b3082f0\"/>\n<approved hash=\"3,16,d1789338133b517b\"/>\n<approved hash=\"3,16,c436cc754c714432\"/>\n<approved hash=\"3,16,11bb92f812fb91b8\"/>\n<approved hash=\"3,16,1b760cb68cb29b72\"/>\n<approved hash=\"3,16,1a3752f6d2f29a33\"/>\n<approved hash=\"3,16,597792371234d974\"/>\n<approved hash=\"3,16,583812f792f4d83b\"/>\n<approved hash=\"3,16,99475107d13b197b\"/>\n<approved hash=\"3,16,d6869047107a56bb\"/>\n<approved hash=\"3,16,16c6d18651bb96fb\"/>\n<approved hash=\"3,16,570511c691fbd738\"/>\n<approved hash=\"3,16,9445918511b81478\"/>\n<approved hash=\"3,16,d785edc46dfb57ba\"/>\n<approved hash=\"3,16,17c4d28452ba97fa\"/>\n<approved hash=\"3,16,cc7fd8bf58b54c75\"/>\n<approved hash=\"3,16,5603d344537ad63d\"/>\n<approved hash=\"3,16,4c38587fd875cc32\"/>\n<approved hash=\"3,16,d7fc90bc10bd57fd\"/>\n<approved hash=\"3,16,cdf8d83858324df2\"/>\n<approved hash=\"3,16,173d907c107d973c\"/>\n<approved hash=\"3,16,4db959f8d9f2cdb3\"/>\n<approved hash=\"3,16,cd79d9b959b34d73\"/>\n<approved hash=\"3,16,4d3a5979d973cd30\"/>\n<approved hash=\"3,16,cafad93a59304af0\"/>\n<approved hash=\"3,16,4abb5efadef0cab1\"/>\n<approved hash=\"3,16,ca7bdebb5eb14a71\"/>\n<approved hash=\"3,16,4a445e7bde71ca4e\"/>\n<approved hash=\"3,16,ca04de445e4e4a0e\"/>\n<approved hash=\"3,16,4dc90688868bcdca\"/>\n<approved hash=\"3,16,cd898749074a4d8a\"/>\n<approved hash=\"3,16,4d45c486448acd49\"/>\n<approved hash=\"3,16,cd05c54545494d09\"/>\n<approved hash=\"3,16,4ec405858589cec8\"/>\n<approved hash=\"3,16,ce8559c5d9c84e88\"/>\n<approved hash=\"3,16,4e425885d888ce4f\"/>\n<approved hash=\"3,16,8e8298c218cf0e8f\"/>\n<approved hash=\"3,16,0f40db015b0f8f4e\"/>\n<approved hash=\"3,16,40801a409a4fc08f\"/>\n<approved hash=\"3,16,41435b80db8fc14c\"/>\n<approved hash=\"3,16,81825c42dc4c018c\"/>\n<approved hash=\"3,16,cdc39c821c8f4dce\"/>\n<approved hash=\"3,16,0d03d2c352ce8d0e\"/>\n<approved hash=\"3,16,0ccbd184518e8cc1\"/>\n<approved hash=\"3,16,19b5a4f524f799b7\"/>\n<approved hash=\"3,16,4b0b11cb91c0cb00\"/>\n<approved hash=\"3,16,987424b5a4b71876\"/>\n<approved hash=\"3,16,8a4a500bd0000a41\"/>\n<approved hash=\"3,16,1834a57425769836\"/>\n<approved hash=\"3,16,cb8a914a11414b81\"/>\n<approved hash=\"3,16,98f72534a53618f5\"/>\n<approved hash=\"3,16,c848de8b5e8e484d\"/>\n<approved hash=\"3,16,18b7a5f725f598b5\"/>\n<approved hash=\"3,16,08885e48de4d888d\"/>\n<approved hash=\"3,16,9b766537e5351b74\"/>\n<approved hash=\"3,16,4ac99e881e8dcacc\"/>\n<approved hash=\"3,16,1b36e6f666f49b34\"/>\n<approved hash=\"3,16,8a091d499d4c0a0c\"/>\n<approved hash=\"3,16,db7166b6e6b45b73\"/>\n<approved hash=\"3,16,4a4e9d091d0cca4b\"/>\n<approved hash=\"3,16,5b31e6716673db33\"/>\n<approved hash=\"3,16,888e1dce9dc40884\"/>\n<approved hash=\"3,16,daf06631e6335af2\"/>\n<approved hash=\"3,16,c8cfdd0e5d0448c5\"/>\n<approved hash=\"3,16,5ab02670a672dab2\"/>\n<approved hash=\"3,16,0e0f5ccfdcc48e04\"/>\n<approved hash=\"3,16,19f3a630260d99ce\"/>\n<approved hash=\"3,16,4d4d130e9307cd44\"/>\n<approved hash=\"3,16,99b326f3a6ce198e\"/>\n<approved hash=\"3,16,838dd34d53450385\"/>\n<approved hash=\"3,16,5ef2a6b3268edecf\"/>\n<approved hash=\"3,16,c5ca968b168545c4\"/>\n<approved hash=\"3,16,deb261f2e1cf5e8f\"/>\n<approved hash=\"3,16,c689134993434683\"/>\n<approved hash=\"3,16,5e6de1b2618fde50\"/>\n<approved hash=\"3,16,87d70c088c0307dc\"/>\n<approved hash=\"3,16,1fad616de1509f90\"/>\n<approved hash=\"3,16,47174d57cd5cc71c\"/>\n<approved hash=\"3,16,deef22aea2905ed1\"/>\n<approved hash=\"3,16,c6d98f980f9c46dd\"/>\n<approved hash=\"3,16,dfafa36f23515f91\"/>\n<approved hash=\"3,16,4698c9d849ddc69d\"/>\n<approved hash=\"3,16,dc6c63afe3ae5c6d\"/>\n<approved hash=\"3,16,c6580b1b8b1d465e\"/>\n<approved hash=\"3,16,dd2ce36c636d5d2d\"/>\n<approved hash=\"3,16,c7184a58ca5e471e\"/>\n<approved hash=\"3,16,7b83f8c378c3fb83\"/>\n<approved hash=\"3,16,1e6da2ac22ad9e6c\"/>\n<approved hash=\"3,16,79423903b900f941\"/>\n<approved hash=\"3,16,39837a43fa41b981\"/>\n<approved hash=\"3,16,3644bd833d80b647\"/>\n<approved hash=\"3,16,f784fdc47dc77787\"/>\n<approved hash=\"3,16,76457d84fd87f646\"/>\n<approved hash=\"3,16,b785bdc53dc63786\"/>\n<approved hash=\"3,16,f7d9fd1a7d0777c4\"/>\n<approved hash=\"3,16,7799fed97ec4f784\"/>\n<approved hash=\"3,16,87d83f19bf0407c5\"/>\n<approved hash=\"3,16,c7194059c0454705\"/>\n<approved hash=\"3,16,0656ff997f85864a\"/>\n<approved hash=\"3,16,4696fe567e49c689\"/>\n<approved hash=\"3,16,c757bf963f894748\"/>\n<approved hash=\"3,16,ad1d2a5daa5c2d1c\"/>\n<approved hash=\"3,16,c4177ed7fec84408\"/>\n<approved hash=\"3,16,ec5e6b9deb9c6c5f\"/>\n<approved hash=\"3,16,0554fe977e88854b\"/>\n<approved hash=\"3,16,2e9eabde2bdcae9c\"/>\n<approved hash=\"3,16,459441d4c1cac58a\"/>\n<approved hash=\"3,16,b35f2b9eab9d335c\"/>\n<approved hash=\"3,16,81d5c194418a01cb\"/>\n<approved hash=\"3,16,b6186bd8ebd23612\"/>\n<approved hash=\"3,16,c11482d402cb410b\"/>\n<approved hash=\"3,16,36dfeb986b92b6d5\"/>\n<approved hash=\"3,16,c0d30294829440d3\"/>\n<approved hash=\"3,16,b69f2bdfabd53695\"/>\n<approved hash=\"3,16,0313c3d343d38313\"/>\n<approved hash=\"3,16,375eab9f2b95b754\"/>\n<approved hash=\"3,16,b71e6adeead43714\"/>\n<approved hash=\"3,16,37da6999e994b7d7\"/>\n<approved hash=\"3,16,b79a685ae8573797\"/>\n<approved hash=\"3,16,305aae9b2e97b056\"/>\n<approved hash=\"3,16,b0192b59ab563016\"/>\n<approved hash=\"3,16,30e7b5183516b0e9\"/>\n<approved hash=\"19,16,beff17851510bc6a\"/>\n<approved hash=\"19,16,b3cd1ab71b18b262\"/>\n<approved hash=\"19,16,a3fe24045875df8f\"/>\n<approved hash=\"19,16,76fe058407087472\"/>\n<approved hash=\"19,16,7bcc08b609007a7a\"/>\n</errors>\n</board>\n</drawing>\n<compatibility>\n<note version=\"6.3\" minversion=\"6.2.2\" severity=\"warning\">\nSince Version 6.2.2 text objects can contain more than one line,\nwhich will not be processed correctly with this version.\n</note>\n</compatibility>\n</eagle>\n"
  },
  {
    "path": "Eagle Files/Memory Display V2.sch",
    "content": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE eagle SYSTEM \"eagle.dtd\">\n<eagle version=\"7.7.0\">\n<drawing>\n<settings>\n<setting alwaysvectorfont=\"no\"/>\n<setting verticaltext=\"up\"/>\n</settings>\n<grid distance=\"0.1\" unitdist=\"inch\" unit=\"inch\" style=\"lines\" multiple=\"1\" display=\"no\" altdistance=\"0.01\" altunitdist=\"inch\" altunit=\"inch\"/>\n<layers>\n<layer number=\"1\" name=\"Top\" color=\"4\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"16\" name=\"Bottom\" color=\"1\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"17\" name=\"Pads\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"18\" name=\"Vias\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"19\" name=\"Unrouted\" color=\"6\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"20\" name=\"Dimension\" color=\"15\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"21\" name=\"tPlace\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"22\" name=\"bPlace\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"23\" name=\"tOrigins\" color=\"15\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"24\" name=\"bOrigins\" color=\"15\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"25\" name=\"tNames\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"26\" name=\"bNames\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"27\" name=\"tValues\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"28\" name=\"bValues\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"29\" name=\"tStop\" color=\"7\" fill=\"3\" visible=\"no\" active=\"no\"/>\n<layer number=\"30\" name=\"bStop\" color=\"7\" fill=\"6\" visible=\"no\" active=\"no\"/>\n<layer number=\"31\" name=\"tCream\" color=\"7\" fill=\"4\" visible=\"no\" active=\"no\"/>\n<layer number=\"32\" name=\"bCream\" color=\"7\" fill=\"5\" visible=\"no\" active=\"no\"/>\n<layer number=\"33\" name=\"tFinish\" color=\"6\" fill=\"3\" visible=\"no\" active=\"no\"/>\n<layer number=\"34\" name=\"bFinish\" color=\"6\" fill=\"6\" visible=\"no\" active=\"no\"/>\n<layer number=\"35\" name=\"tGlue\" color=\"7\" fill=\"4\" visible=\"no\" active=\"no\"/>\n<layer number=\"36\" name=\"bGlue\" color=\"7\" fill=\"5\" visible=\"no\" active=\"no\"/>\n<layer number=\"37\" name=\"tTest\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"38\" name=\"bTest\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"39\" name=\"tKeepout\" color=\"4\" fill=\"11\" visible=\"no\" active=\"no\"/>\n<layer number=\"40\" name=\"bKeepout\" color=\"1\" fill=\"11\" visible=\"no\" active=\"no\"/>\n<layer number=\"41\" name=\"tRestrict\" color=\"4\" fill=\"10\" visible=\"no\" active=\"no\"/>\n<layer number=\"42\" name=\"bRestrict\" color=\"1\" fill=\"10\" visible=\"no\" active=\"no\"/>\n<layer number=\"43\" name=\"vRestrict\" color=\"2\" fill=\"10\" visible=\"no\" active=\"no\"/>\n<layer number=\"44\" name=\"Drills\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"45\" name=\"Holes\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"46\" name=\"Milling\" color=\"3\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"47\" name=\"Measures\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"48\" name=\"Document\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"49\" name=\"Reference\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"50\" name=\"dxf\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"51\" name=\"tDocu\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"52\" name=\"bDocu\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"53\" name=\"tGND_GNDA\" color=\"7\" fill=\"9\" visible=\"no\" active=\"no\"/>\n<layer number=\"54\" name=\"bGND_GNDA\" color=\"1\" fill=\"9\" visible=\"no\" active=\"no\"/>\n<layer number=\"56\" name=\"wert\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"57\" name=\"tCAD\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"59\" name=\"tCarbon\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"60\" name=\"bCarbon\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"88\" name=\"SimResults\" color=\"9\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"89\" name=\"SimProbes\" color=\"9\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"90\" name=\"Modules\" color=\"5\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"91\" name=\"Nets\" color=\"2\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"92\" name=\"Busses\" color=\"1\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"93\" name=\"Pins\" color=\"2\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"94\" name=\"Symbols\" color=\"4\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"95\" name=\"Names\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"96\" name=\"Values\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"97\" name=\"Info\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"98\" name=\"Guide\" color=\"6\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"99\" name=\"SpiceOrder\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"100\" name=\"Muster\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"101\" name=\"Patch_Top\" color=\"12\" fill=\"4\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"102\" name=\"Vscore\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"103\" name=\"tMap\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"104\" name=\"Name\" color=\"16\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"105\" name=\"tPlate\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"106\" name=\"bPlate\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"107\" name=\"Crop\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"108\" name=\"tplace-old\" color=\"10\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"109\" name=\"ref-old\" color=\"11\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"110\" name=\"fp0\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"111\" name=\"LPC17xx\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"112\" name=\"tSilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"113\" name=\"IDFDebug\" color=\"4\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"114\" name=\"Badge_Outline\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"115\" name=\"ReferenceISLANDS\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"116\" name=\"Patch_BOT\" color=\"9\" fill=\"4\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"118\" name=\"Rect_Pads\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"121\" name=\"_tsilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"122\" name=\"_bsilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"123\" name=\"tTestmark\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"124\" name=\"bTestmark\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"125\" name=\"_tNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"126\" name=\"_bNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"127\" name=\"_tValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"128\" name=\"_bValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"129\" name=\"Mask\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"131\" name=\"tAdjust\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"132\" name=\"bAdjust\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"144\" name=\"Drill_legend\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"150\" name=\"Notes\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"151\" name=\"HeatSink\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"152\" name=\"_bDocu\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"153\" name=\"FabDoc1\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"154\" name=\"FabDoc2\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"155\" name=\"FabDoc3\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"199\" name=\"Contour\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"200\" name=\"200bmp\" color=\"1\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"201\" name=\"201bmp\" color=\"2\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"202\" name=\"202bmp\" color=\"3\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"203\" name=\"203bmp\" color=\"4\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"204\" name=\"204bmp\" color=\"5\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"205\" name=\"205bmp\" color=\"6\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"206\" name=\"206bmp\" color=\"7\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"207\" name=\"207bmp\" color=\"8\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"208\" name=\"208bmp\" color=\"9\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"209\" name=\"209bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"210\" name=\"210bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"211\" name=\"211bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"212\" name=\"212bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"213\" name=\"213bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"214\" name=\"214bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"215\" name=\"215bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"216\" name=\"216bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"217\" name=\"217bmp\" color=\"18\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"218\" name=\"218bmp\" color=\"19\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"219\" name=\"219bmp\" color=\"20\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"220\" name=\"220bmp\" color=\"21\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"221\" name=\"221bmp\" color=\"22\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"222\" name=\"222bmp\" color=\"23\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"223\" name=\"223bmp\" color=\"24\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"224\" name=\"224bmp\" color=\"25\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"225\" name=\"225bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"226\" name=\"226bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"227\" name=\"227bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"228\" name=\"228bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"229\" name=\"229bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"230\" name=\"230bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"231\" name=\"231bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"232\" name=\"Eagle3D_PG2\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"233\" name=\"Eagle3D_PG3\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"248\" name=\"Housing\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"249\" name=\"Edge\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"250\" name=\"Descript\" color=\"3\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"251\" name=\"SMDround\" color=\"12\" fill=\"11\" visible=\"no\" active=\"no\"/>\n<layer number=\"254\" name=\"cooling\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"255\" name=\"routoute\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n</layers>\n<schematic xreflabel=\"%F%N/%S.%C%R\" xrefpart=\"/%S.%C%R\">\n<libraries>\n<library name=\"SparkFun-Electromechanical\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"JOYSTICK_MINI\">\n<smd name=\"A\" x=\"-3.325\" y=\"1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"B\" x=\"3.325\" y=\"1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"C\" x=\"-3.325\" y=\"-1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"CTR\" x=\"-3.325\" y=\"0\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"D\" x=\"3.325\" y=\"-1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"GND\" x=\"3.325\" y=\"0\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"NC\" x=\"0\" y=\"4.13\" dx=\"1.9\" dy=\"2\" layer=\"1\"/>\n<smd name=\"NC@0\" x=\"0\" y=\"-4.13\" dx=\"1.9\" dy=\"2\" layer=\"1\"/>\n<text x=\"-2.5\" y=\"3.8\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-2.5\" y=\"-4.2\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<hole x=\"0\" y=\"1.9\" drill=\"0.75\"/>\n<hole x=\"0\" y=\"-1.9\" drill=\"1.05\"/>\n<wire x1=\"2.65\" y1=\"-3.5\" x2=\"-2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.65\" y1=\"-3.5\" x2=\"-3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.65\" y1=\"-2.5\" x2=\"-3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.65\" y1=\"2.5\" x2=\"-2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.65\" y1=\"3.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"3.5\" x2=\"2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.65\" y1=\"3.5\" x2=\"3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.65\" y1=\"2.5\" x2=\"3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.65\" y1=\"-2.5\" x2=\"2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.046446875\" y1=\"-0.353553125\" x2=\"-0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.353553125\" y1=\"-1.046446875\" x2=\"0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"0.353553125\" y1=\"-1.046446875\" x2=\"1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.046446875\" y1=\"-0.353553125\" x2=\"1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"1.046446875\" y1=\"0.353553125\" x2=\"0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.353553125\" y1=\"1.046446875\" x2=\"-0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"-0.353553125\" y1=\"1.046446875\" x2=\"-1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.046446875\" y1=\"0.353553125\" x2=\"-1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.3\" y1=\"1.3\" x2=\"-2.2\" y2=\"2.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-1.6\" y2=\"2.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-2.2\" y2=\"1.6\" width=\"0.2032\" layer=\"21\"/>\n<text x=\"-2.9\" y=\"1.9\" size=\"0.8128\" layer=\"21\" ratio=\"20\" rot=\"SR45\">UP</text>\n<wire x1=\"-1\" y1=\"3.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.65\" y1=\"-3.5\" x2=\"-2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.65\" y1=\"-3.5\" x2=\"-3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.65\" y1=\"-2.5\" x2=\"-3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.65\" y1=\"2.5\" x2=\"-2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.65\" y1=\"3.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"1\" y1=\"3.5\" x2=\"2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2.65\" y1=\"3.5\" x2=\"3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3.65\" y1=\"2.5\" x2=\"3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3.65\" y1=\"-2.5\" x2=\"2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.046446875\" y1=\"-0.353553125\" x2=\"-0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-0.353553125\" y1=\"-1.046446875\" x2=\"0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"0.353553125\" y1=\"-1.046446875\" x2=\"1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"1.046446875\" y1=\"-0.353553125\" x2=\"1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.046446875\" y1=\"0.353553125\" x2=\"0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0.353553125\" y1=\"1.046446875\" x2=\"-0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-0.353553125\" y1=\"1.046446875\" x2=\"-1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.046446875\" y1=\"0.353553125\" x2=\"-1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.3\" y1=\"1.3\" x2=\"-2.2\" y2=\"2.2\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-1.6\" y2=\"2.2\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-2.2\" y2=\"1.6\" width=\"0.2032\" layer=\"51\"/>\n<text x=\"-2.9\" y=\"1.9\" size=\"0.8128\" layer=\"51\" ratio=\"20\" rot=\"SR45\">UP</text>\n<wire x1=\"-1\" y1=\"3.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n</package>\n<package name=\"SWITCH-SPDT\">\n<wire x1=\"2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"2.54\" drill=\"1.016\" diameter=\"1.8796\"/>\n<pad name=\"2\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\"/>\n<pad name=\"3\" x=\"0\" y=\"-2.54\" drill=\"1.016\" diameter=\"1.8796\"/>\n<text x=\"-3.81\" y=\"7.62\" size=\"1.778\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-3.81\" y=\"-9.525\" size=\"1.778\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n<package name=\"AYZ0202\">\n<description>&lt;b&gt;DPDT Slide Switch SMD&lt;/b&gt;\nwww.SparkFun.com SKU : Comp-SMDS</description>\n<wire x1=\"-3.6\" y1=\"1.75\" x2=\"-3.6\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.6\" y1=\"-1.75\" x2=\"3.6\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.6\" y1=\"-1.75\" x2=\"3.6\" y2=\"1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.6\" y1=\"1.75\" x2=\"-3.6\" y2=\"1.75\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"3\" x=\"2.5\" y=\"2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<smd name=\"2\" x=\"0\" y=\"2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<smd name=\"1\" x=\"-2.5\" y=\"2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<smd name=\"6\" x=\"2.5\" y=\"-2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<smd name=\"5\" x=\"0\" y=\"-2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<smd name=\"4\" x=\"-2.5\" y=\"-2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<text x=\"-2.54\" y=\"1.143\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"0.508\" y=\"1.143\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<hole x=\"1.5\" y=\"0\" drill=\"0.85\"/>\n<hole x=\"-1.5\" y=\"0\" drill=\"0.85\"/>\n</package>\n<package name=\"SWITCHE-DPDT\">\n<wire x1=\"8\" y1=\"3.25\" x2=\"-8\" y2=\"3.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-8\" y1=\"3.25\" x2=\"-8\" y2=\"-3.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-8\" y1=\"-3.25\" x2=\"8\" y2=\"-3.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"8\" y1=\"-3.25\" x2=\"8\" y2=\"3.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-6\" y1=\"3.25\" x2=\"6\" y2=\"3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8\" y1=\"1\" x2=\"8\" y2=\"-1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"6\" y1=\"-3.25\" x2=\"-6\" y2=\"-3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-8\" y1=\"-1\" x2=\"-8\" y2=\"1\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-7.5\" y=\"3\" drill=\"1.5\" diameter=\"2.54\"/>\n<pad name=\"P$2\" x=\"-7.5\" y=\"-3\" drill=\"1.5\" diameter=\"2.54\"/>\n<pad name=\"P$3\" x=\"7.5\" y=\"3\" drill=\"1.5\" diameter=\"2.54\"/>\n<pad name=\"P$4\" x=\"7.5\" y=\"-3\" drill=\"1.5\" diameter=\"2.54\"/>\n<pad name=\"1\" x=\"-4\" y=\"1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n<pad name=\"2\" x=\"0\" y=\"1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n<pad name=\"3\" x=\"4\" y=\"1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n<pad name=\"4\" x=\"-4\" y=\"-1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n<pad name=\"5\" x=\"0\" y=\"-1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n<pad name=\"6\" x=\"4\" y=\"-1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n</package>\n<package name=\"R_SW_TH\">\n<wire x1=\"-1.651\" y1=\"19.2532\" x2=\"-1.651\" y2=\"-1.3716\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.651\" y1=\"-1.3716\" x2=\"-1.651\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.651\" y1=\"19.2532\" x2=\"13.589\" y2=\"19.2532\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"13.589\" y1=\"19.2532\" x2=\"13.589\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"13.589\" y1=\"-2.2352\" x2=\"-1.651\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"0\" y=\"0\" drill=\"1.6002\"/>\n<pad name=\"P$2\" x=\"0\" y=\"16.9926\" drill=\"1.6002\"/>\n<pad name=\"P$3\" x=\"12.0904\" y=\"15.494\" drill=\"1.6002\"/>\n<pad name=\"P$4\" x=\"12.0904\" y=\"8.4582\" drill=\"1.6002\"/>\n</package>\n<package name=\"SWITCH-SPDT-SMD\">\n<wire x1=\"-4.5\" y1=\"1.75\" x2=\"-4.5\" y2=\"-1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-4.5\" y1=\"-1.75\" x2=\"4.5\" y2=\"-1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"4.5\" y1=\"-1.75\" x2=\"4.5\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"4.5\" y1=\"1.75\" x2=\"2\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"1.75\" x2=\"0.5\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.5\" y1=\"1.75\" x2=\"-4.5\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.5\" y1=\"1.75\" x2=\"0.5\" y2=\"3.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.5\" y1=\"3.75\" x2=\"2\" y2=\"3.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"3.75\" x2=\"2\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-4\" y1=\"-1.75\" x2=\"-4.5\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.5\" y1=\"-1.75\" x2=\"-4.5\" y2=\"1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.5\" y1=\"1.75\" x2=\"4.5\" y2=\"1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4.5\" y1=\"1.75\" x2=\"4.5\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4.5\" y1=\"-1.75\" x2=\"4\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-2.5\" y=\"-2.75\" dx=\"1.2\" dy=\"2.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"0\" y=\"-2.75\" dx=\"1.2\" dy=\"2.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"2.5\" y=\"-2.75\" dx=\"1.2\" dy=\"2.5\" layer=\"1\" rot=\"R180\"/>\n<text x=\"-1.27\" y=\"0.635\" size=\"0.6096\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"-1.27\" size=\"0.6096\" layer=\"27\">&gt;Value</text>\n<hole x=\"-3.55\" y=\"0\" drill=\"0.9\"/>\n<hole x=\"3.55\" y=\"0\" drill=\"0.9\"/>\n</package>\n<package name=\"SWITCH-SPDT_LOCK.007S\">\n<wire x1=\"2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"2.7178\" drill=\"1.016\" diameter=\"1.8796\"/>\n<pad name=\"2\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\"/>\n<pad name=\"3\" x=\"0\" y=\"-2.7178\" drill=\"1.016\" diameter=\"1.8796\"/>\n<text x=\"-3.81\" y=\"7.62\" size=\"1.778\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-3.81\" y=\"-9.525\" size=\"1.778\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n<rectangle x1=\"-0.2286\" y1=\"-0.3048\" x2=\"0.2286\" y2=\"0.3048\" layer=\"51\"/>\n<rectangle x1=\"-0.2286\" y1=\"2.2352\" x2=\"0.2286\" y2=\"2.8448\" layer=\"51\"/>\n<rectangle x1=\"-0.2286\" y1=\"-2.8448\" x2=\"0.2286\" y2=\"-2.2352\" layer=\"51\"/>\n</package>\n<package name=\"SWITCH-SPDT_KIT\">\n<description>&lt;h3&gt;SWITCH-SPDT_KIT&lt;/h3&gt;\nThrough-hole SPDT Switch&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>\n<wire x1=\"2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"2.7178\" drill=\"1.016\" diameter=\"1.8796\" stop=\"no\"/>\n<pad name=\"2\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" stop=\"no\"/>\n<pad name=\"3\" x=\"0\" y=\"-2.7178\" drill=\"1.016\" diameter=\"1.8796\" stop=\"no\"/>\n<text x=\"-3.81\" y=\"7.62\" size=\"1.778\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-3.81\" y=\"-9.525\" size=\"1.778\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n<rectangle x1=\"-0.2286\" y1=\"-0.3048\" x2=\"0.2286\" y2=\"0.3048\" layer=\"51\"/>\n<rectangle x1=\"-0.2286\" y1=\"2.2352\" x2=\"0.2286\" y2=\"2.8448\" layer=\"51\"/>\n<rectangle x1=\"-0.2286\" y1=\"-2.8448\" x2=\"0.2286\" y2=\"-2.2352\" layer=\"51\"/>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-0.0178\" y=\"1.8414\" curve=\"-90.039946\"/>\n<vertex x=\"-0.8787\" y=\"2.6975\" curve=\"-90\"/>\n<vertex x=\"-0.0026\" y=\"3.5916\" curve=\"-90.006409\"/>\n<vertex x=\"0.8738\" y=\"2.6975\" curve=\"-90.03214\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-0.0051\" y=\"-3.5967\" curve=\"-90.006558\"/>\n<vertex x=\"-0.8788\" y=\"-2.7431\" curve=\"-90.037923\"/>\n<vertex x=\"0.0128\" y=\"-1.8363\" curve=\"-90.006318\"/>\n<vertex x=\"0.8814\" y=\"-2.7432\" curve=\"-90.038792\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-0.0102\" y=\"-0.8738\" curve=\"-90.019852\"/>\n<vertex x=\"-0.8762\" y=\"-0.0203\" curve=\"-90.019119\"/>\n<vertex x=\"0.0153\" y=\"0.8789\" curve=\"-90\"/>\n<vertex x=\"0.8739\" y=\"-0.0077\" curve=\"-90.038897\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"0\" y=\"2.2758\" curve=\"-90.012891\"/>\n<vertex x=\"-0.4445\" y=\"2.7\" curve=\"-90\"/>\n<vertex x=\"0\" y=\"3.1673\" curve=\"-90\"/>\n<vertex x=\"0.4419\" y=\"2.7102\" curve=\"-90.012967\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"0.0026\" y=\"-3.1648\" curve=\"-90.012891\"/>\n<vertex x=\"-0.4419\" y=\"-2.7406\" curve=\"-90\"/>\n<vertex x=\"0.0026\" y=\"-2.2733\" curve=\"-90\"/>\n<vertex x=\"0.4445\" y=\"-2.7304\" curve=\"-90.012967\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"0.0102\" y=\"-0.4471\" curve=\"-90.012891\"/>\n<vertex x=\"-0.4343\" y=\"-0.0229\" curve=\"-90\"/>\n<vertex x=\"0.0102\" y=\"0.4444\" curve=\"-90\"/>\n<vertex x=\"0.4521\" y=\"-0.0127\" curve=\"-90.012967\"/>\n</polygon>\n</package>\n<package name=\"SWITCH-SPST-SMD-A\">\n<wire x1=\"-3.35\" y1=\"1.3\" x2=\"-3.35\" y2=\"-1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.35\" y1=\"-1.3\" x2=\"3.35\" y2=\"-1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.35\" y1=\"-1.3\" x2=\"3.35\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.35\" y1=\"1.3\" x2=\"-0.1\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"1.3\" x2=\"-1.4\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"1.3\" x2=\"-3.35\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"1.3\" x2=\"-0.1\" y2=\"2.8\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"2.8\" x2=\"-1.4\" y2=\"2.8\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"2.8\" x2=\"-1.4\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.35\" y1=\"0.3\" x2=\"-3.35\" y2=\"-0.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.35\" y1=\"0.3\" x2=\"3.35\" y2=\"-0.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.7\" y1=\"1.3\" x2=\"-2.7\" y2=\"1.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.5\" y1=\"-1.3\" x2=\"0\" y2=\"-1.3\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-2.25\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"-0.75\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"2.25\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"GND1\" x=\"-3.65\" y=\"1\" dx=\"1\" dy=\"0.6\" layer=\"1\"/>\n<smd name=\"GND2\" x=\"-3.65\" y=\"-1.1\" dx=\"1\" dy=\"0.8\" layer=\"1\"/>\n<smd name=\"GND3\" x=\"3.65\" y=\"1\" dx=\"1\" dy=\"0.6\" layer=\"1\"/>\n<smd name=\"GND4\" x=\"3.65\" y=\"-1.1\" dx=\"1\" dy=\"0.8\" layer=\"1\"/>\n<text x=\"-1.27\" y=\"0.635\" size=\"0.6096\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"-1.27\" size=\"0.6096\" layer=\"27\">&gt;Value</text>\n<hole x=\"-1.5\" y=\"0\" drill=\"0.9\"/>\n<hole x=\"1.5\" y=\"0\" drill=\"0.9\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"JOYSTICK_MINI\">\n<wire x1=\"-10.16\" y1=\"5.08\" x2=\"10.16\" y2=\"5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"10.16\" y1=\"5.08\" x2=\"10.16\" y2=\"-5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"10.16\" y1=\"-5.08\" x2=\"-10.16\" y2=\"-5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-10.16\" y1=\"-5.08\" x2=\"-10.16\" y2=\"5.08\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-10.16\" y=\"-7.62\" size=\"1.778\" layer=\"96\" font=\"vector\">&gt;Value</text>\n<text x=\"-10.16\" y=\"5.842\" size=\"1.778\" layer=\"95\" font=\"vector\">&gt;Name</text>\n<pin name=\"CENT\" x=\"12.7\" y=\"-2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"DOWN\" x=\"-12.7\" y=\"0\" length=\"short\"/>\n<pin name=\"GND\" x=\"-12.7\" y=\"-2.54\" length=\"short\"/>\n<pin name=\"LEFT\" x=\"12.7\" y=\"2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"RIGHT\" x=\"12.7\" y=\"0\" length=\"short\" rot=\"R180\"/>\n<pin name=\"UP\" x=\"-12.7\" y=\"2.54\" length=\"short\"/>\n</symbol>\n<symbol name=\"TOGGLE\">\n<wire x1=\"0\" y1=\"0\" x2=\"2.54\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-2.54\" x2=\"3.175\" y2=\"-2.54\" width=\"0.127\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"2.54\" x2=\"3.175\" y2=\"2.54\" width=\"0.1524\" layer=\"94\"/>\n<circle x=\"2.54\" y=\"2.54\" radius=\"0.3592\" width=\"0.2032\" layer=\"94\"/>\n<circle x=\"2.54\" y=\"-2.54\" radius=\"0.3592\" width=\"0.2032\" layer=\"94\"/>\n<circle x=\"0\" y=\"0\" radius=\"0.3592\" width=\"0.2032\" layer=\"94\"/>\n<text x=\"-1.905\" y=\"-6.35\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"-2.54\" y=\"3.81\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"P\" x=\"-2.54\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\"/>\n<pin name=\"S\" x=\"5.08\" y=\"-2.54\" visible=\"off\" length=\"short\" direction=\"pas\" rot=\"R180\"/>\n<pin name=\"O\" x=\"5.08\" y=\"2.54\" visible=\"off\" length=\"short\" direction=\"pas\" rot=\"R180\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"JOYSTICK_MINI\" prefix=\"S\" uservalue=\"yes\">\n<description>Small 5-way tactile joystick, COM-10063&lt;p&gt;\n4UCON SF303GJ26</description>\n<gates>\n<gate name=\"G$1\" symbol=\"JOYSTICK_MINI\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"JOYSTICK_MINI\">\n<connects>\n<connect gate=\"G$1\" pin=\"CENT\" pad=\"CTR\"/>\n<connect gate=\"G$1\" pin=\"DOWN\" pad=\"D\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"GND\"/>\n<connect gate=\"G$1\" pin=\"LEFT\" pad=\"C\"/>\n<connect gate=\"G$1\" pin=\"RIGHT\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"UP\" pad=\"A\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"SWITCH-SPDT\" prefix=\"S\" uservalue=\"yes\">\n<description>&lt;b&gt;SPDT Switch&lt;/b&gt;&lt;br&gt;\nSimple slide switch, Spark Fun Electronics SKU : COM-00102&lt;br&gt;\nDPDT SMT slide switch, AYZ0202, SWCH-08179</description>\n<gates>\n<gate name=\"1\" symbol=\"TOGGLE\" x=\"-2.54\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"PTH\" package=\"SWITCH-SPDT\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"SWCH-08261\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"SMD\" package=\"AYZ0202\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"SWCH-08179\" constant=\"no\"/>\n<attribute name=\"SF_ID\" value=\"COM-00597\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"PTH2\" package=\"SWITCHE-DPDT\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"PTH3\" package=\"R_SW_TH\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"P$1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"P$2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"P$3\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"SMD2\" package=\"SWITCH-SPDT-SMD\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"PTH_LOCK\" package=\"SWITCH-SPDT_LOCK.007S\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"KIT\" package=\"SWITCH-SPDT_KIT\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"SWCH-08261\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-SMD-A\" package=\"SWITCH-SPST-SMD-A\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"SWCH-10651\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"microbuilder\">\n<packages>\n<package name=\"EVQ-Q2\">\n<wire x1=\"-3.3\" y1=\"3\" x2=\"3.3\" y2=\"3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"3\" x2=\"3.3\" y2=\"-3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"-3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.3\" y1=\"-1.2\" x2=\"-3.3\" y2=\"1.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"1.2\" x2=\"3.3\" y2=\"-1.2\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5033\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"B\" x=\"-3.4\" y=\"2\" dx=\"3.2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"B'\" x=\"3.4\" y=\"2\" dx=\"3.2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A'\" x=\"3.4\" y=\"-2\" dx=\"3.2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A\" x=\"-3.4\" y=\"-2\" dx=\"3.2\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-3.175\" y=\"3.5\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-3.175\" y=\"-3.683\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n<package name=\"BTN_KMR2_4.6X2.8\">\n<wire x1=\"-0.4\" y1=\"0.4\" x2=\"0\" y2=\"0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"0.4\" x2=\"0.4\" y2=\"0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.4\" y1=\"-0.4\" x2=\"0\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"-0.4\" x2=\"0.4\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"0.4\" x2=\"0\" y2=\"0.2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"-0.4\" x2=\"0\" y2=\"-0.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"0.2\" x2=\"0.3\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-2.1\" y1=\"1.4\" x2=\"2.1\" y2=\"1.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2.1\" y1=\"1.4\" x2=\"2.1\" y2=\"-1.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2.1\" y1=\"-1.4\" x2=\"-2.1\" y2=\"-1.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.1\" y1=\"-1.4\" x2=\"-2.1\" y2=\"1.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.05\" y1=\"-0.8\" x2=\"-1.05\" y2=\"0.8\" width=\"0.2032\" layer=\"51\" curve=\"-44.999389\"/>\n<wire x1=\"-1.05\" y1=\"0.8\" x2=\"1.05\" y2=\"0.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"1.05\" y1=\"0.8\" x2=\"1.05\" y2=\"-0.8\" width=\"0.2032\" layer=\"51\" curve=\"-44.999389\"/>\n<wire x1=\"1.05\" y1=\"-0.8\" x2=\"-1.05\" y2=\"-0.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.1\" y1=\"1.5254\" x2=\"2.1\" y2=\"1.5254\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.1\" y1=\"-1.5254\" x2=\"-2.1\" y2=\"-1.5254\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"A\" x=\"2.05\" y=\"0.8\" dx=\"0.9\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"B\" x=\"2.05\" y=\"-0.8\" dx=\"0.9\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"B'\" x=\"-2.05\" y=\"-0.8\" dx=\"0.9\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"A'\" x=\"-2.05\" y=\"0.8\" dx=\"0.9\" dy=\"0.9\" layer=\"1\"/>\n<text x=\"-2.032\" y=\"1.778\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-2.032\" y=\"-2.159\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n<package name=\"BTN_EVQPQ_4.5MM\">\n<wire x1=\"-2.25\" y1=\"2.25\" x2=\"2.25\" y2=\"2.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2.25\" y1=\"2.25\" x2=\"2.25\" y2=\"-2.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2.25\" y1=\"-2.25\" x2=\"-2.25\" y2=\"-2.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-2.25\" y1=\"-2.25\" x2=\"-2.25\" y2=\"2.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-2.25\" y1=\"-1.15\" x2=\"-2.25\" y2=\"1.15\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.25\" y1=\"2.25\" x2=\"1.25\" y2=\"2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.25\" y1=\"1.15\" x2=\"2.25\" y2=\"-1.15\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.25\" y1=\"-2.25\" x2=\"1.25\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<smd name=\"A\" x=\"-1.95\" y=\"1.925\" dx=\"0.9\" dy=\"1\" layer=\"1\"/>\n<smd name=\"B\" x=\"1.95\" y=\"1.925\" dx=\"0.9\" dy=\"1\" layer=\"1\"/>\n<smd name=\"C\" x=\"-1.95\" y=\"-1.925\" dx=\"0.9\" dy=\"1\" layer=\"1\"/>\n<smd name=\"D\" x=\"1.95\" y=\"-1.925\" dx=\"0.9\" dy=\"1\" layer=\"1\"/>\n<text x=\"-2.286\" y=\"2.794\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-2.286\" y=\"-3.556\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n<package name=\"BTN_KMT0\">\n<description>&lt;p&gt;Source: http://media.digikey.com/pdf/Data%20Sheets/C&amp;K/KMT_0xx_NGJ_LHS_Drawing.pdf&lt;/p&gt;</description>\n<smd name=\"A\" x=\"-1.625\" y=\"0.95\" dx=\"0.95\" dy=\"0.7\" layer=\"1\"/>\n<smd name=\"B\" x=\"-1.625\" y=\"-0.95\" dx=\"0.95\" dy=\"0.7\" layer=\"1\"/>\n<smd name=\"B'\" x=\"1.625\" y=\"-0.95\" dx=\"0.95\" dy=\"0.7\" layer=\"1\"/>\n<smd name=\"A'\" x=\"1.625\" y=\"0.95\" dx=\"0.95\" dy=\"0.7\" layer=\"1\"/>\n<wire x1=\"-1.15\" y1=\"1.3\" x2=\"-1.25\" y2=\"1.2\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.25\" y1=\"1.2\" x2=\"-1.25\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.25\" y1=\"0.7\" x2=\"-1.4\" y2=\"0.55\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.4\" y1=\"0.55\" x2=\"-1.425\" y2=\"0.55\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.425\" y1=\"0.55\" x2=\"-1.5\" y2=\"0.475\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.5\" y1=\"0.475\" x2=\"-1.5\" y2=\"0.15\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"0.15\" x2=\"-1.5\" y2=\"-0.25\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.25\" x2=\"-1.5\" y2=\"-0.5\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.5\" x2=\"-1.425\" y2=\"-0.575\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.425\" y1=\"-0.575\" x2=\"-1.4\" y2=\"-0.575\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"-0.575\" x2=\"-1.25\" y2=\"-0.725\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.25\" y1=\"-0.725\" x2=\"-1.25\" y2=\"-1.2\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.25\" y1=\"-1.2\" x2=\"-1.125\" y2=\"-1.325\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.125\" y1=\"-1.325\" x2=\"1.125\" y2=\"-1.325\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.125\" y1=\"-1.325\" x2=\"1.25\" y2=\"-1.2\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.25\" y1=\"-1.2\" x2=\"1.25\" y2=\"-0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.25\" y1=\"-0.7\" x2=\"1.375\" y2=\"-0.575\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.375\" y1=\"-0.575\" x2=\"1.425\" y2=\"-0.575\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.425\" y1=\"-0.575\" x2=\"1.5\" y2=\"-0.5\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.5\" y1=\"-0.5\" x2=\"1.5\" y2=\"-0.275\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"-0.275\" x2=\"1.5\" y2=\"0.125\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.125\" x2=\"1.5\" y2=\"0.475\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.475\" x2=\"1.425\" y2=\"0.55\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.4\" y1=\"0.55\" x2=\"1.35\" y2=\"0.55\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.35\" y1=\"0.55\" x2=\"1.25\" y2=\"0.65\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.25\" y1=\"0.65\" x2=\"1.25\" y2=\"1.2\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.25\" y1=\"1.2\" x2=\"1.15\" y2=\"1.3\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.15\" y1=\"1.3\" x2=\"-1.15\" y2=\"1.3\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.15\" y1=\"1.3\" x2=\"1.25\" y2=\"1.3\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.25\" y1=\"1.3\" x2=\"1.375\" y2=\"1.175\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.375\" y1=\"1.175\" x2=\"1.325\" y2=\"1.175\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"1.175\" x2=\"1.325\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"0.675\" x2=\"1.325\" y2=\"0.625\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"0.625\" x2=\"1.4\" y2=\"0.55\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.4\" y1=\"0.55\" x2=\"1.425\" y2=\"0.55\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.425\" y1=\"0.55\" x2=\"1.5\" y2=\"0.475\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.5\" y1=\"0.125\" x2=\"1.55\" y2=\"0.125\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.55\" y1=\"0.125\" x2=\"1.55\" y2=\"-0.275\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.55\" y1=\"-0.275\" x2=\"1.5\" y2=\"-0.275\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.375\" y1=\"1.175\" x2=\"1.625\" y2=\"1.175\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.625\" y1=\"1.175\" x2=\"1.725\" y2=\"1.175\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.725\" y1=\"1.175\" x2=\"1.725\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.725\" y1=\"0.675\" x2=\"1.625\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.625\" y1=\"0.675\" x2=\"1.5\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.675\" x2=\"1.325\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.475\" x2=\"1.5\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.625\" y1=\"1.175\" x2=\"1.625\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"-0.725\" x2=\"1.325\" y2=\"-0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"-0.675\" x2=\"1.425\" y2=\"-0.575\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.325\" y1=\"-0.725\" x2=\"1.5\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"-0.725\" x2=\"1.6\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.6\" y1=\"-0.725\" x2=\"1.7\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.7\" y1=\"-0.725\" x2=\"1.7\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.7\" y1=\"-1.225\" x2=\"1.6\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.6\" y1=\"-1.225\" x2=\"1.375\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.375\" y1=\"-1.225\" x2=\"1.325\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"-1.225\" x2=\"1.325\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.6\" y1=\"-0.725\" x2=\"1.6\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.125\" y1=\"-1.325\" x2=\"1.275\" y2=\"-1.325\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.275\" y1=\"-1.325\" x2=\"1.375\" y2=\"-1.225\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.5\" y1=\"-0.5\" x2=\"1.5\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.05\" y1=\"1.225\" x2=\"1.05\" y2=\"1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.05\" y1=\"1.225\" x2=\"1.175\" y2=\"1.1\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.175\" y1=\"1.1\" x2=\"1.175\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.175\" y1=\"0.675\" x2=\"1.325\" y2=\"0.525\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.325\" y1=\"0.525\" x2=\"1.35\" y2=\"0.525\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.35\" y1=\"0.525\" x2=\"1.45\" y2=\"0.425\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.45\" y1=\"0.425\" x2=\"1.45\" y2=\"-0.45\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.45\" y1=\"-0.45\" x2=\"1.325\" y2=\"-0.575\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.325\" y1=\"-0.575\" x2=\"1.3\" y2=\"-0.575\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.3\" y1=\"-0.575\" x2=\"1.175\" y2=\"-0.7\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.175\" y1=\"-0.7\" x2=\"1.175\" y2=\"-1.125\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.175\" y1=\"-1.125\" x2=\"1.05\" y2=\"-1.25\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.05\" y1=\"-1.25\" x2=\"-1.025\" y2=\"-1.25\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.025\" y1=\"-1.25\" x2=\"-1.175\" y2=\"-1.1\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.175\" y1=\"-1.1\" x2=\"-1.175\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.175\" y1=\"-0.725\" x2=\"-1.35\" y2=\"-0.55\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.35\" y1=\"-0.55\" x2=\"-1.375\" y2=\"-0.55\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.375\" y1=\"-0.55\" x2=\"-1.45\" y2=\"-0.475\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.45\" y1=\"-0.475\" x2=\"-1.45\" y2=\"0.425\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.45\" y1=\"0.425\" x2=\"-1.35\" y2=\"0.525\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.35\" y1=\"0.525\" x2=\"-1.325\" y2=\"0.525\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.325\" y1=\"0.525\" x2=\"-1.175\" y2=\"0.675\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.175\" y1=\"0.675\" x2=\"-1.175\" y2=\"1.1\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.175\" y1=\"1.1\" x2=\"-1.05\" y2=\"1.225\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.15\" y1=\"1.3\" x2=\"-1.275\" y2=\"1.3\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.275\" y1=\"1.3\" x2=\"-1.375\" y2=\"1.2\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.7\" y1=\"1.2\" x2=\"-1.6\" y2=\"1.2\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.6\" y1=\"1.2\" x2=\"-1.35\" y2=\"1.2\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"1.2\" x2=\"-1.35\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"0.7\" x2=\"-1.5\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"0.7\" x2=\"-1.6\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.6\" y1=\"0.7\" x2=\"-1.7\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.7\" y1=\"0.7\" x2=\"-1.7\" y2=\"1.2\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.6\" y1=\"1.2\" x2=\"-1.6\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"0.7\" x2=\"-1.35\" y2=\"0.625\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"0.625\" x2=\"-1.425\" y2=\"0.55\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.5\" y1=\"0.15\" x2=\"-1.55\" y2=\"0.15\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.55\" y1=\"0.15\" x2=\"-1.55\" y2=\"-0.25\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.55\" y1=\"-0.25\" x2=\"-1.5\" y2=\"-0.25\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"0.475\" x2=\"-1.5\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.125\" y1=\"-1.325\" x2=\"-1.275\" y2=\"-1.325\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.275\" y1=\"-1.325\" x2=\"-1.375\" y2=\"-1.225\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.25\" y1=\"-1.225\" x2=\"-1.35\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"-1.225\" x2=\"-1.625\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.625\" y1=\"-1.225\" x2=\"-1.725\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.725\" y1=\"-1.225\" x2=\"-1.725\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.725\" y1=\"-0.725\" x2=\"-1.625\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.625\" y1=\"-0.725\" x2=\"-1.5\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.725\" x2=\"-1.35\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"-0.725\" x2=\"-1.35\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.625\" y1=\"-0.725\" x2=\"-1.625\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"-0.725\" x2=\"-1.35\" y2=\"-0.65\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"-0.65\" x2=\"-1.425\" y2=\"-0.575\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.5\" y1=\"-0.5\" x2=\"-1.5\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<circle x=\"0\" y=\"0\" radius=\"0.391309375\" width=\"0.05\" layer=\"51\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.053859375\" width=\"0.05\" layer=\"51\"/>\n<text x=\"-1.732\" y=\"1.503\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-1.507\" y=\"-1.884\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n<wire x1=\"-0.975\" y1=\"1.3\" x2=\"0.975\" y2=\"1.3\" width=\"0.05\" layer=\"21\"/>\n<wire x1=\"-1.5\" y1=\"0.475\" x2=\"-1.5\" y2=\"-0.475\" width=\"0.05\" layer=\"21\"/>\n<wire x1=\"1.5\" y1=\"0.475\" x2=\"1.5\" y2=\"-0.475\" width=\"0.05\" layer=\"21\"/>\n<wire x1=\"-0.975\" y1=\"-1.325\" x2=\"0.975\" y2=\"-1.325\" width=\"0.05\" layer=\"21\"/>\n</package>\n<package name=\"EVQ-Q2_SMALLER\">\n<wire x1=\"-3.3\" y1=\"3\" x2=\"3.3\" y2=\"3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"3\" x2=\"3.3\" y2=\"-3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"-3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.3\" y1=\"-1.2\" x2=\"-3.3\" y2=\"1.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"1.2\" x2=\"3.3\" y2=\"-1.2\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5033\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"B\" x=\"-3.1\" y=\"2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"B'\" x=\"3.1\" y=\"2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A'\" x=\"3.1\" y=\"-2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A\" x=\"-3.1\" y=\"-2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-3.175\" y=\"3.5\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-3.175\" y=\"-3.683\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n</packages>\n<symbols>\n<symbol name=\"BUTTON_4PIN\">\n<wire x1=\"1.905\" y1=\"0\" x2=\"2.54\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.905\" y1=\"4.445\" x2=\"1.905\" y2=\"3.175\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-1.905\" y1=\"4.445\" x2=\"-1.905\" y2=\"3.175\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.905\" y1=\"4.445\" x2=\"0\" y2=\"4.445\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"4.445\" x2=\"-1.905\" y2=\"4.445\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"0\" y2=\"1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"1.27\" x2=\"0\" y2=\"0.635\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"4.445\" x2=\"0\" y2=\"3.175\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-2.54\" x2=\"2.54\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"-2.54\" x2=\"-2.54\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"1.905\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<circle x=\"-2.54\" y=\"0\" radius=\"0.127\" width=\"0.4064\" layer=\"94\"/>\n<circle x=\"2.54\" y=\"0\" radius=\"0.127\" width=\"0.4064\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"6.35\" size=\"1.27\" layer=\"95\">&gt;NAME</text>\n<text x=\"-2.54\" y=\"-5.08\" size=\"1.27\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"P\" x=\"-5.08\" y=\"0\" visible=\"pad\" length=\"short\" direction=\"pas\" swaplevel=\"2\"/>\n<pin name=\"S\" x=\"5.08\" y=\"0\" visible=\"pad\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R180\"/>\n<pin name=\"S1\" x=\"5.08\" y=\"-2.54\" visible=\"pad\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R180\"/>\n<pin name=\"P1\" x=\"-5.08\" y=\"-2.54\" visible=\"pad\" length=\"short\" direction=\"pas\" swaplevel=\"2\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"SWITCH_TACT_SMT\" prefix=\"SW\" uservalue=\"yes\">\n<description>&lt;p&gt;SMT Tact Switches&lt;/p&gt;\n&lt;ul&gt;\n&lt;li&gt;6x6mm - Digikey: P12940SCT-ND&lt;/li&gt;\n&lt;li&gt;KMR2 (4.6x2.8mm) - Digikey: 401-1426-1-ND&lt;/li&gt;\n&lt;li&gt;EVQ-PQHB55 - Light Touch, 160GF (4.5x4.5mm) - Digikey: P8090SCT-ND&lt;/li&gt;\n&lt;li&gt;KMT0 - KMT021 NGJ LHS (etc.) IP68/Waterproof - Digikey: CKN10289CT-ND&lt;/li&gt;\n&lt;/ul&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"BUTTON_4PIN\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"EVQ-Q2\">\n<connects>\n<connect gate=\"G$1\" pin=\"P\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"P1\" pad=\"A'\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"S1\" pad=\"B'\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"4.6X2.8\" package=\"BTN_KMR2_4.6X2.8\">\n<connects>\n<connect gate=\"G$1\" pin=\"P\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"P1\" pad=\"A'\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"S1\" pad=\"B'\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"EVQPQ\" package=\"BTN_EVQPQ_4.5MM\">\n<connects>\n<connect gate=\"G$1\" pin=\"P\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"P1\" pad=\"C\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"S1\" pad=\"D\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"KMT0\" package=\"BTN_KMT0\">\n<connects>\n<connect gate=\"G$1\" pin=\"P\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"P1\" pad=\"A'\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"S1\" pad=\"B'\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"_EVQQ2_SMALL\" package=\"EVQ-Q2_SMALLER\">\n<connects>\n<connect gate=\"G$1\" pin=\"P\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"P1\" pad=\"A'\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"S1\" pad=\"B'\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-RF\">\n<description>&lt;h3&gt;SparkFun RF, WiFi, Cellular, and Bluetooth&lt;/h3&gt;\nIn this library you'll find things that send or receive RF-- cellular modules, Bluetooth, WiFi, etc.\n&lt;br&gt;\n&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. \n&lt;br&gt;\n&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=\" www.sparkfun.com\"&gt;SparkFun.com&lt;/a&gt;.\n&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;\n&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"ESP-WROOM-32\">\n<wire x1=\"-10.3\" y1=\"-9\" x2=\"-10.3\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"-10.3\" y1=\"9\" x2=\"9.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"9\" x2=\"15.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"15.2\" y1=\"9\" x2=\"15.2\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"15.2\" y1=\"-9\" x2=\"9.2\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"-9\" x2=\"-10.3\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"-9\" x2=\"9.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<text x=\"12.2\" y=\"0\" size=\"1.27\" layer=\"51\" rot=\"R270\" align=\"center\">Keepout Zone</text>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"8.15\" y=\"9\"/>\n<vertex x=\"8\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"7.925\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"7.475\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"7.4\" y=\"9\"/>\n<vertex x=\"7.25\" y=\"9\"/>\n<vertex x=\"7.25\" y=\"8.55\"/>\n<vertex x=\"8.15\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"9\"/>\n<vertex x=\"6.73\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"6.655\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"6.205\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"6.13\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"8.55\"/>\n<vertex x=\"6.88\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"9\"/>\n<vertex x=\"5.46\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"5.385\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"4.935\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"4.86\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"8.55\"/>\n<vertex x=\"5.61\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"9\"/>\n<vertex x=\"4.19\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"4.115\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"3.665\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"3.59\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"8.55\"/>\n<vertex x=\"4.34\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"9\"/>\n<vertex x=\"2.92\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"2.845\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"2.395\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"2.32\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"8.55\"/>\n<vertex x=\"3.07\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"9\"/>\n<vertex x=\"1.65\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"1.575\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"1.125\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"1.05\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"8.55\"/>\n<vertex x=\"1.8\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"9\"/>\n<vertex x=\"0.38\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"0.305\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-0.145\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-0.22\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"8.55\"/>\n<vertex x=\"0.53\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"9\"/>\n<vertex x=\"-0.89\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-0.965\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-1.415\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-1.49\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"8.55\"/>\n<vertex x=\"-0.74\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"9\"/>\n<vertex x=\"-2.16\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-2.235\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-2.685\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-2.76\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"8.55\"/>\n<vertex x=\"-2.01\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"9\"/>\n<vertex x=\"-3.43\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-3.505\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-3.955\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-4.03\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"8.55\"/>\n<vertex x=\"-3.28\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"9\"/>\n<vertex x=\"-4.7\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-4.775\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-5.225\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-5.3\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"8.55\"/>\n<vertex x=\"-4.55\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"9\"/>\n<vertex x=\"-5.97\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-6.045\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-6.495\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-6.57\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"8.55\"/>\n<vertex x=\"-5.82\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"9\"/>\n<vertex x=\"-7.24\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-7.315\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-7.765\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-7.84\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"8.55\"/>\n<vertex x=\"-7.09\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"9\"/>\n<vertex x=\"-8.51\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-8.585\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-9.035\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-9.11\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"8.55\"/>\n<vertex x=\"-8.36\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"8.15\" y=\"-9\"/>\n<vertex x=\"8\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"7.925\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"7.475\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"7.4\" y=\"-9\"/>\n<vertex x=\"7.25\" y=\"-9\"/>\n<vertex x=\"7.25\" y=\"-8.55\"/>\n<vertex x=\"8.15\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"-9\"/>\n<vertex x=\"6.73\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"6.655\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"6.205\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"6.13\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-8.55\"/>\n<vertex x=\"6.88\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"-9\"/>\n<vertex x=\"5.46\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"5.385\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"4.935\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"4.86\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-8.55\"/>\n<vertex x=\"5.61\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"-9\"/>\n<vertex x=\"4.19\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"4.115\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"3.665\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"3.59\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-8.55\"/>\n<vertex x=\"4.34\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"-9\"/>\n<vertex x=\"2.92\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"2.845\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"2.395\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"2.32\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-8.55\"/>\n<vertex x=\"3.07\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"-9\"/>\n<vertex x=\"1.65\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"1.575\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"1.125\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"1.05\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-8.55\"/>\n<vertex x=\"1.8\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"-9\"/>\n<vertex x=\"0.38\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"0.305\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-0.145\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-0.22\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-8.55\"/>\n<vertex x=\"0.53\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"-9\"/>\n<vertex x=\"-0.89\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-0.965\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-1.415\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-1.49\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-8.55\"/>\n<vertex x=\"-0.74\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"-9\"/>\n<vertex x=\"-2.16\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-2.235\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-2.685\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-2.76\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-8.55\"/>\n<vertex x=\"-2.01\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"-9\"/>\n<vertex x=\"-3.43\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-3.505\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-3.955\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-4.03\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-8.55\"/>\n<vertex x=\"-3.28\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"-9\"/>\n<vertex x=\"-4.7\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-4.775\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-5.225\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-5.3\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-8.55\"/>\n<vertex x=\"-4.55\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"-9\"/>\n<vertex x=\"-5.97\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-6.045\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-6.495\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-6.57\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-8.55\"/>\n<vertex x=\"-5.82\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"-9\"/>\n<vertex x=\"-7.24\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-7.315\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-7.765\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-7.84\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-8.55\"/>\n<vertex x=\"-7.09\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"-9\"/>\n<vertex x=\"-8.51\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-8.585\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-9.035\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-9.11\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-8.55\"/>\n<vertex x=\"-8.36\" y=\"-8.55\"/>\n</polygon>\n<smd name=\"1\" x=\"7.7\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"2\" x=\"6.43\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"3\" x=\"5.16\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"4\" x=\"3.89\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"5\" x=\"2.62\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"6\" x=\"1.35\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"7\" x=\"0.08\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"8\" x=\"-1.19\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"9\" x=\"-2.46\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"10\" x=\"-3.73\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"11\" x=\"-5\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"12\" x=\"-6.27\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"13\" x=\"-7.54\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"14\" x=\"-8.81\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"1.085\"/>\n<vertex x=\"-10.3\" y=\"0.935\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"0.86\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"0.41\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"0.335\"/>\n<vertex x=\"-10.3\" y=\"0.185\"/>\n<vertex x=\"-9.85\" y=\"0.185\"/>\n<vertex x=\"-9.85\" y=\"1.085\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-0.185\"/>\n<vertex x=\"-10.3\" y=\"-0.335\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-0.41\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-0.86\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-0.935\"/>\n<vertex x=\"-10.3\" y=\"-1.085\"/>\n<vertex x=\"-9.85\" y=\"-1.085\"/>\n<vertex x=\"-9.85\" y=\"-0.185\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"2.355\"/>\n<vertex x=\"-10.3\" y=\"2.205\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"2.13\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"1.68\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"1.605\"/>\n<vertex x=\"-10.3\" y=\"1.455\"/>\n<vertex x=\"-9.85\" y=\"1.455\"/>\n<vertex x=\"-9.85\" y=\"2.355\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"3.625\"/>\n<vertex x=\"-10.3\" y=\"3.475\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"3.4\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"2.95\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"2.875\"/>\n<vertex x=\"-10.3\" y=\"2.725\"/>\n<vertex x=\"-9.85\" y=\"2.725\"/>\n<vertex x=\"-9.85\" y=\"3.625\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"4.895\"/>\n<vertex x=\"-10.3\" y=\"4.745\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"4.67\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"4.22\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"4.145\"/>\n<vertex x=\"-10.3\" y=\"3.995\"/>\n<vertex x=\"-9.85\" y=\"3.995\"/>\n<vertex x=\"-9.85\" y=\"4.895\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"6.165\"/>\n<vertex x=\"-10.3\" y=\"6.015\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"5.94\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"5.49\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"5.415\"/>\n<vertex x=\"-10.3\" y=\"5.265\"/>\n<vertex x=\"-9.85\" y=\"5.265\"/>\n<vertex x=\"-9.85\" y=\"6.165\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-1.455\"/>\n<vertex x=\"-10.3\" y=\"-1.605\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-1.68\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-2.13\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-2.205\"/>\n<vertex x=\"-10.3\" y=\"-2.355\"/>\n<vertex x=\"-9.85\" y=\"-2.355\"/>\n<vertex x=\"-9.85\" y=\"-1.455\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-2.725\"/>\n<vertex x=\"-10.3\" y=\"-2.875\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-2.95\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-3.4\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-3.475\"/>\n<vertex x=\"-10.3\" y=\"-3.625\"/>\n<vertex x=\"-9.85\" y=\"-3.625\"/>\n<vertex x=\"-9.85\" y=\"-2.725\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-3.995\"/>\n<vertex x=\"-10.3\" y=\"-4.145\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-4.22\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-4.67\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-4.745\"/>\n<vertex x=\"-10.3\" y=\"-4.895\"/>\n<vertex x=\"-9.85\" y=\"-4.895\"/>\n<vertex x=\"-9.85\" y=\"-3.995\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-5.265\"/>\n<vertex x=\"-10.3\" y=\"-5.415\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-5.49\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-5.94\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-6.015\"/>\n<vertex x=\"-10.3\" y=\"-6.165\"/>\n<vertex x=\"-9.85\" y=\"-6.165\"/>\n<vertex x=\"-9.85\" y=\"-5.265\"/>\n</polygon>\n<smd name=\"15\" x=\"-10.3\" y=\"5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"16\" x=\"-10.3\" y=\"4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"17\" x=\"-10.3\" y=\"3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"18\" x=\"-10.3\" y=\"1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"19\" x=\"-10.3\" y=\"0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"20\" x=\"-10.3\" y=\"-0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"21\" x=\"-10.3\" y=\"-1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"22\" x=\"-10.3\" y=\"-3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"23\" x=\"-10.3\" y=\"-4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"24\" x=\"-10.3\" y=\"-5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"25\" x=\"-8.81\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"26\" x=\"-7.54\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"27\" x=\"-6.27\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"28\" x=\"-5\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"29\" x=\"-3.73\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"30\" x=\"-2.46\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"31\" x=\"-1.19\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"32\" x=\"0.08\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"33\" x=\"1.35\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"34\" x=\"2.62\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"35\" x=\"3.89\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"36\" x=\"5.16\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"37\" x=\"6.43\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"38\" x=\"7.7\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"GND\" x=\"0\" y=\"0\" dx=\"6\" dy=\"6\" layer=\"1\"/>\n<wire x1=\"-10.427\" y1=\"6.35\" x2=\"-10.427\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"9.127\" x2=\"-9.4\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"-6.35\" x2=\"-10.427\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"-9.127\" x2=\"-9.4\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<text x=\"-7.76\" y=\"0\" size=\"0.8128\" layer=\"25\" rot=\"R90\" align=\"center\">&gt;Name</text>\n<text x=\"-6.49\" y=\"0\" size=\"0.8128\" layer=\"27\" rot=\"R90\" align=\"center\">&gt;Value</text>\n<wire x1=\"8.311\" y1=\"9.127\" x2=\"15.327\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.311\" y1=\"-9.127\" x2=\"15.327\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"15.327\" y1=\"9.127\" x2=\"15.327\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n</package>\n<package name=\"ESP-WROOM-32-NARROW\">\n<wire x1=\"-11.57\" y1=\"-9\" x2=\"-11.57\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"-11.57\" y1=\"9\" x2=\"7.93\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"7.93\" y1=\"9\" x2=\"13.93\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"13.93\" y1=\"9\" x2=\"13.93\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"13.93\" y1=\"-9\" x2=\"7.93\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"7.93\" y1=\"-9\" x2=\"-11.57\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"7.93\" y1=\"-9\" x2=\"7.93\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<text x=\"10.93\" y=\"0\" size=\"1.27\" layer=\"51\" rot=\"R270\" align=\"center\">Keepout Zone</text>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"9\"/>\n<vertex x=\"6.73\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"6.655\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"6.205\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"6.13\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"8.55\"/>\n<vertex x=\"6.88\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"9\"/>\n<vertex x=\"5.46\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"5.385\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"4.935\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"4.86\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"8.55\"/>\n<vertex x=\"5.61\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"9\"/>\n<vertex x=\"4.19\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"4.115\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"3.665\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"3.59\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"8.55\"/>\n<vertex x=\"4.34\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"9\"/>\n<vertex x=\"2.92\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"2.845\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"2.395\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"2.32\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"8.55\"/>\n<vertex x=\"3.07\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"9\"/>\n<vertex x=\"1.65\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"1.575\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"1.125\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"1.05\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"8.55\"/>\n<vertex x=\"1.8\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"9\"/>\n<vertex x=\"0.38\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"0.305\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-0.145\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-0.22\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"8.55\"/>\n<vertex x=\"0.53\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"9\"/>\n<vertex x=\"-0.89\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-0.965\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-1.415\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-1.49\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"8.55\"/>\n<vertex x=\"-0.74\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"9\"/>\n<vertex x=\"-2.16\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-2.235\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-2.685\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-2.76\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"8.55\"/>\n<vertex x=\"-2.01\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"9\"/>\n<vertex x=\"-3.43\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-3.505\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-3.955\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-4.03\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"8.55\"/>\n<vertex x=\"-3.28\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"9\"/>\n<vertex x=\"-4.7\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-4.775\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-5.225\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-5.3\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"8.55\"/>\n<vertex x=\"-4.55\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"9\"/>\n<vertex x=\"-5.97\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-6.045\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-6.495\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-6.57\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"8.55\"/>\n<vertex x=\"-5.82\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"9\"/>\n<vertex x=\"-7.24\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-7.315\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-7.765\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-7.84\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"8.55\"/>\n<vertex x=\"-7.09\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"9\"/>\n<vertex x=\"-8.51\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-8.585\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-9.035\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-9.11\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"8.55\"/>\n<vertex x=\"-8.36\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-9.63\" y=\"9\"/>\n<vertex x=\"-9.78\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-9.855\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-10.305\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-10.38\" y=\"9\"/>\n<vertex x=\"-10.53\" y=\"9\"/>\n<vertex x=\"-10.53\" y=\"8.55\"/>\n<vertex x=\"-9.63\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"-9\"/>\n<vertex x=\"6.73\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"6.655\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"6.205\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"6.13\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-8.55\"/>\n<vertex x=\"6.88\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"-9\"/>\n<vertex x=\"5.46\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"5.385\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"4.935\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"4.86\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-8.55\"/>\n<vertex x=\"5.61\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"-9\"/>\n<vertex x=\"4.19\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"4.115\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"3.665\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"3.59\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-8.55\"/>\n<vertex x=\"4.34\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"-9\"/>\n<vertex x=\"2.92\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"2.845\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"2.395\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"2.32\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-8.55\"/>\n<vertex x=\"3.07\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"-9\"/>\n<vertex x=\"1.65\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"1.575\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"1.125\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"1.05\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-8.55\"/>\n<vertex x=\"1.8\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"-9\"/>\n<vertex x=\"0.38\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"0.305\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-0.145\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-0.22\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-8.55\"/>\n<vertex x=\"0.53\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"-9\"/>\n<vertex x=\"-0.89\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-0.965\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-1.415\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-1.49\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-8.55\"/>\n<vertex x=\"-0.74\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"-9\"/>\n<vertex x=\"-2.16\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-2.235\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-2.685\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-2.76\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-8.55\"/>\n<vertex x=\"-2.01\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"-9\"/>\n<vertex x=\"-3.43\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-3.505\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-3.955\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-4.03\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-8.55\"/>\n<vertex x=\"-3.28\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"-9\"/>\n<vertex x=\"-4.7\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-4.775\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-5.225\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-5.3\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-8.55\"/>\n<vertex x=\"-4.55\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"-9\"/>\n<vertex x=\"-5.97\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-6.045\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-6.495\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-6.57\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-8.55\"/>\n<vertex x=\"-5.82\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"-9\"/>\n<vertex x=\"-7.24\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-7.315\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-7.765\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-7.84\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-8.55\"/>\n<vertex x=\"-7.09\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"-9\"/>\n<vertex x=\"-8.51\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-8.585\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-9.035\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-9.11\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-8.55\"/>\n<vertex x=\"-8.36\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-9.63\" y=\"-9\"/>\n<vertex x=\"-9.78\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-9.855\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-10.305\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-10.38\" y=\"-9\"/>\n<vertex x=\"-10.53\" y=\"-9\"/>\n<vertex x=\"-10.53\" y=\"-8.55\"/>\n<vertex x=\"-9.63\" y=\"-8.55\"/>\n</polygon>\n<smd name=\"1\" x=\"6.43\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"2\" x=\"5.16\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"3\" x=\"3.89\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"4\" x=\"2.62\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"5\" x=\"1.35\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"6\" x=\"0.08\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"7\" x=\"-1.19\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"8\" x=\"-2.46\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"9\" x=\"-3.73\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"10\" x=\"-5\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"11\" x=\"-6.27\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"12\" x=\"-7.54\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"13\" x=\"-8.81\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"14\" x=\"-10.08\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"1.085\"/>\n<vertex x=\"-11.57\" y=\"0.935\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"0.86\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"0.41\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"0.335\"/>\n<vertex x=\"-11.57\" y=\"0.185\"/>\n<vertex x=\"-11.12\" y=\"0.185\"/>\n<vertex x=\"-11.12\" y=\"1.085\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"-0.185\"/>\n<vertex x=\"-11.57\" y=\"-0.335\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"-0.41\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"-0.86\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"-0.935\"/>\n<vertex x=\"-11.57\" y=\"-1.085\"/>\n<vertex x=\"-11.12\" y=\"-1.085\"/>\n<vertex x=\"-11.12\" y=\"-0.185\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"2.355\"/>\n<vertex x=\"-11.57\" y=\"2.205\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"2.13\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"1.68\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"1.605\"/>\n<vertex x=\"-11.57\" y=\"1.455\"/>\n<vertex x=\"-11.12\" y=\"1.455\"/>\n<vertex x=\"-11.12\" y=\"2.355\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"3.625\"/>\n<vertex x=\"-11.57\" y=\"3.475\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"3.4\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"2.95\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"2.875\"/>\n<vertex x=\"-11.57\" y=\"2.725\"/>\n<vertex x=\"-11.12\" y=\"2.725\"/>\n<vertex x=\"-11.12\" y=\"3.625\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"4.895\"/>\n<vertex x=\"-11.57\" y=\"4.745\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"4.67\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"4.22\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"4.145\"/>\n<vertex x=\"-11.57\" y=\"3.995\"/>\n<vertex x=\"-11.12\" y=\"3.995\"/>\n<vertex x=\"-11.12\" y=\"4.895\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"6.165\"/>\n<vertex x=\"-11.57\" y=\"6.015\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"5.94\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"5.49\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"5.415\"/>\n<vertex x=\"-11.57\" y=\"5.265\"/>\n<vertex x=\"-11.12\" y=\"5.265\"/>\n<vertex x=\"-11.12\" y=\"6.165\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"-1.455\"/>\n<vertex x=\"-11.57\" y=\"-1.605\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"-1.68\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"-2.13\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"-2.205\"/>\n<vertex x=\"-11.57\" y=\"-2.355\"/>\n<vertex x=\"-11.12\" y=\"-2.355\"/>\n<vertex x=\"-11.12\" y=\"-1.455\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"-2.725\"/>\n<vertex x=\"-11.57\" y=\"-2.875\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"-2.95\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"-3.4\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"-3.475\"/>\n<vertex x=\"-11.57\" y=\"-3.625\"/>\n<vertex x=\"-11.12\" y=\"-3.625\"/>\n<vertex x=\"-11.12\" y=\"-2.725\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"-3.995\"/>\n<vertex x=\"-11.57\" y=\"-4.145\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"-4.22\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"-4.67\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"-4.745\"/>\n<vertex x=\"-11.57\" y=\"-4.895\"/>\n<vertex x=\"-11.12\" y=\"-4.895\"/>\n<vertex x=\"-11.12\" y=\"-3.995\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"-5.265\"/>\n<vertex x=\"-11.57\" y=\"-5.415\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"-5.49\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"-5.94\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"-6.015\"/>\n<vertex x=\"-11.57\" y=\"-6.165\"/>\n<vertex x=\"-11.12\" y=\"-6.165\"/>\n<vertex x=\"-11.12\" y=\"-5.265\"/>\n</polygon>\n<smd name=\"15\" x=\"-11.57\" y=\"5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"16\" x=\"-11.57\" y=\"4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"17\" x=\"-11.57\" y=\"3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"18\" x=\"-11.57\" y=\"1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"19\" x=\"-11.57\" y=\"0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"20\" x=\"-11.57\" y=\"-0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"21\" x=\"-11.57\" y=\"-1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"22\" x=\"-11.57\" y=\"-3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"23\" x=\"-11.57\" y=\"-4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"24\" x=\"-11.57\" y=\"-5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"25\" x=\"-10.08\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"26\" x=\"-8.81\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"27\" x=\"-7.54\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"28\" x=\"-6.27\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"29\" x=\"-5\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"30\" x=\"-3.73\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"31\" x=\"-2.46\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"32\" x=\"-1.19\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"33\" x=\"0.08\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"34\" x=\"1.35\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"35\" x=\"2.62\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"36\" x=\"3.89\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"37\" x=\"5.16\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"38\" x=\"6.43\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"GND\" x=\"-1.27\" y=\"0\" dx=\"6\" dy=\"6\" layer=\"1\"/>\n<wire x1=\"-11.697\" y1=\"6.35\" x2=\"-11.697\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-11.697\" y1=\"9.127\" x2=\"-10.67\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-11.697\" y1=\"-6.35\" x2=\"-11.697\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-11.697\" y1=\"-9.127\" x2=\"-10.67\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<text x=\"-9.03\" y=\"0\" size=\"0.8128\" layer=\"25\" rot=\"R90\" align=\"center\">&gt;Name</text>\n<text x=\"-7.76\" y=\"0\" size=\"0.8128\" layer=\"27\" rot=\"R90\" align=\"center\">&gt;Value</text>\n<wire x1=\"7.041\" y1=\"9.127\" x2=\"14.057\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"7.041\" y1=\"-9.127\" x2=\"14.057\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"14.057\" y1=\"9.127\" x2=\"14.057\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"ESP-WROOM-32\">\n<pin name=\"GND@1\" x=\"-17.78\" y=\"-27.94\" length=\"short\"/>\n<pin name=\"3V3\" x=\"-17.78\" y=\"33.02\" length=\"short\"/>\n<pin name=\"EN\" x=\"-17.78\" y=\"30.48\" length=\"short\"/>\n<pin name=\"SENSOR_VP/I36\" x=\"17.78\" y=\"-33.02\" length=\"short\" rot=\"R180\"/>\n<pin name=\"SENSOR_VN/I39\" x=\"17.78\" y=\"-35.56\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO34\" x=\"17.78\" y=\"-27.94\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO35\" x=\"17.78\" y=\"-30.48\" length=\"short\" rot=\"R180\"/>\n<pin name=\"XTAL_P/IO32\" x=\"17.78\" y=\"-22.86\" length=\"short\" rot=\"R180\"/>\n<pin name=\"XTAL_N/IO33\" x=\"17.78\" y=\"-25.4\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO25\" x=\"17.78\" y=\"-15.24\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO26\" x=\"17.78\" y=\"-17.78\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO27\" x=\"17.78\" y=\"-20.32\" length=\"short\" rot=\"R180\"/>\n<pin name=\"SCK_H/IO14\" x=\"17.78\" y=\"10.16\" length=\"short\" rot=\"R180\"/>\n<pin name=\"MISO_H/IO12\" x=\"17.78\" y=\"15.24\" length=\"short\" rot=\"R180\"/>\n<pin name=\"GND@15\" x=\"-17.78\" y=\"-30.48\" length=\"short\"/>\n<pin name=\"MOSI_H/IO13\" x=\"17.78\" y=\"12.7\" length=\"short\" rot=\"R180\"/>\n<pin name=\"SHD/IO9\" x=\"-17.78\" y=\"15.24\" length=\"short\"/>\n<pin name=\"SWP/IO10\" x=\"-17.78\" y=\"12.7\" length=\"short\"/>\n<pin name=\"SCS/IO11\" x=\"-17.78\" y=\"10.16\" length=\"short\"/>\n<pin name=\"GND@38\" x=\"-17.78\" y=\"-33.02\" length=\"short\"/>\n<pin name=\"MOSI_V/IO23\" x=\"17.78\" y=\"-12.7\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO22\" x=\"17.78\" y=\"-10.16\" length=\"short\" rot=\"R180\"/>\n<pin name=\"TXD\" x=\"17.78\" y=\"33.02\" length=\"short\" rot=\"R180\"/>\n<pin name=\"RXD\" x=\"17.78\" y=\"30.48\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO21\" x=\"17.78\" y=\"-7.62\" length=\"short\" rot=\"R180\"/>\n<pin name=\"NC\" x=\"17.78\" y=\"-5.08\" length=\"short\" rot=\"R180\"/>\n<pin name=\"MISO_V/IO19\" x=\"17.78\" y=\"-2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"SCK_V/IO18\" x=\"17.78\" y=\"0\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CS0_V/IO5\" x=\"17.78\" y=\"17.78\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO17\" x=\"17.78\" y=\"2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO16\" x=\"17.78\" y=\"5.08\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO4\" x=\"17.78\" y=\"20.32\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO0\" x=\"17.78\" y=\"25.4\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO2\" x=\"17.78\" y=\"22.86\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CS0_H/IO15\" x=\"17.78\" y=\"7.62\" length=\"short\" rot=\"R180\"/>\n<pin name=\"SDI/IO8\" x=\"-17.78\" y=\"2.54\" length=\"short\"/>\n<pin name=\"SDO/IO7\" x=\"-17.78\" y=\"5.08\" length=\"short\"/>\n<pin name=\"SCK/IO6\" x=\"-17.78\" y=\"7.62\" length=\"short\"/>\n<pin name=\"GND\" x=\"-17.78\" y=\"-35.56\" length=\"short\"/>\n<wire x1=\"-15.24\" y1=\"-38.1\" x2=\"-15.24\" y2=\"35.56\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-15.24\" y1=\"35.56\" x2=\"15.24\" y2=\"35.56\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"15.24\" y1=\"35.56\" x2=\"15.24\" y2=\"-38.1\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"15.24\" y1=\"-38.1\" x2=\"-15.24\" y2=\"-38.1\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-15.24\" y=\"35.814\" size=\"1.778\" layer=\"95\">&gt;Name</text>\n<text x=\"-15.24\" y=\"-38.354\" size=\"1.778\" layer=\"96\" align=\"top-left\">&gt;Value</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"ESP-WROOM-32\" prefix=\"U\">\n<gates>\n<gate name=\"G$1\" symbol=\"ESP-WROOM-32\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"ESP-WROOM-32\">\n<connects>\n<connect gate=\"G$1\" pin=\"3V3\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"CS0_H/IO15\" pad=\"23\"/>\n<connect gate=\"G$1\" pin=\"CS0_V/IO5\" pad=\"29\"/>\n<connect gate=\"G$1\" pin=\"EN\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"GND\"/>\n<connect gate=\"G$1\" pin=\"GND@1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"GND@15\" pad=\"15\"/>\n<connect gate=\"G$1\" pin=\"GND@38\" pad=\"38\"/>\n<connect gate=\"G$1\" pin=\"IO0\" pad=\"25\"/>\n<connect gate=\"G$1\" pin=\"IO16\" pad=\"27\"/>\n<connect gate=\"G$1\" pin=\"IO17\" pad=\"28\"/>\n<connect gate=\"G$1\" pin=\"IO2\" pad=\"24\"/>\n<connect gate=\"G$1\" pin=\"IO21\" pad=\"33\"/>\n<connect gate=\"G$1\" pin=\"IO22\" pad=\"36\"/>\n<connect gate=\"G$1\" pin=\"IO25\" pad=\"10\"/>\n<connect gate=\"G$1\" pin=\"IO26\" pad=\"11\"/>\n<connect gate=\"G$1\" pin=\"IO27\" pad=\"12\"/>\n<connect gate=\"G$1\" pin=\"IO34\" pad=\"6\"/>\n<connect gate=\"G$1\" pin=\"IO35\" pad=\"7\"/>\n<connect gate=\"G$1\" pin=\"IO4\" pad=\"26\"/>\n<connect gate=\"G$1\" pin=\"MISO_H/IO12\" pad=\"14\"/>\n<connect gate=\"G$1\" pin=\"MISO_V/IO19\" pad=\"31\"/>\n<connect gate=\"G$1\" pin=\"MOSI_H/IO13\" pad=\"16\"/>\n<connect gate=\"G$1\" pin=\"MOSI_V/IO23\" pad=\"37\"/>\n<connect gate=\"G$1\" pin=\"NC\" pad=\"32\"/>\n<connect gate=\"G$1\" pin=\"RXD\" pad=\"34\"/>\n<connect gate=\"G$1\" pin=\"SCK/IO6\" pad=\"20\"/>\n<connect gate=\"G$1\" pin=\"SCK_H/IO14\" pad=\"13\"/>\n<connect gate=\"G$1\" pin=\"SCK_V/IO18\" pad=\"30\"/>\n<connect gate=\"G$1\" pin=\"SCS/IO11\" pad=\"19\"/>\n<connect gate=\"G$1\" pin=\"SDI/IO8\" pad=\"22\"/>\n<connect gate=\"G$1\" pin=\"SDO/IO7\" pad=\"21\"/>\n<connect gate=\"G$1\" pin=\"SENSOR_VN/I39\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"SENSOR_VP/I36\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"SHD/IO9\" pad=\"17\"/>\n<connect gate=\"G$1\" pin=\"SWP/IO10\" pad=\"18\"/>\n<connect gate=\"G$1\" pin=\"TXD\" pad=\"35\"/>\n<connect gate=\"G$1\" pin=\"XTAL_N/IO33\" pad=\"9\"/>\n<connect gate=\"G$1\" pin=\"XTAL_P/IO32\" pad=\"8\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"IC-13849\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"NARROW\" package=\"ESP-WROOM-32-NARROW\">\n<connects>\n<connect gate=\"G$1\" pin=\"3V3\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"CS0_H/IO15\" pad=\"23\"/>\n<connect gate=\"G$1\" pin=\"CS0_V/IO5\" pad=\"29\"/>\n<connect gate=\"G$1\" pin=\"EN\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"GND\"/>\n<connect gate=\"G$1\" pin=\"GND@1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"GND@15\" pad=\"15\"/>\n<connect gate=\"G$1\" pin=\"GND@38\" pad=\"38\"/>\n<connect gate=\"G$1\" pin=\"IO0\" pad=\"25\"/>\n<connect gate=\"G$1\" pin=\"IO16\" pad=\"27\"/>\n<connect gate=\"G$1\" pin=\"IO17\" pad=\"28\"/>\n<connect gate=\"G$1\" pin=\"IO2\" pad=\"24\"/>\n<connect gate=\"G$1\" pin=\"IO21\" pad=\"33\"/>\n<connect gate=\"G$1\" pin=\"IO22\" pad=\"36\"/>\n<connect gate=\"G$1\" pin=\"IO25\" pad=\"10\"/>\n<connect gate=\"G$1\" pin=\"IO26\" pad=\"11\"/>\n<connect gate=\"G$1\" pin=\"IO27\" pad=\"12\"/>\n<connect gate=\"G$1\" pin=\"IO34\" pad=\"6\"/>\n<connect gate=\"G$1\" pin=\"IO35\" pad=\"7\"/>\n<connect gate=\"G$1\" pin=\"IO4\" pad=\"26\"/>\n<connect gate=\"G$1\" pin=\"MISO_H/IO12\" pad=\"14\"/>\n<connect gate=\"G$1\" pin=\"MISO_V/IO19\" pad=\"31\"/>\n<connect gate=\"G$1\" pin=\"MOSI_H/IO13\" pad=\"16\"/>\n<connect gate=\"G$1\" pin=\"MOSI_V/IO23\" pad=\"37\"/>\n<connect gate=\"G$1\" pin=\"NC\" pad=\"32\"/>\n<connect gate=\"G$1\" pin=\"RXD\" pad=\"34\"/>\n<connect gate=\"G$1\" pin=\"SCK/IO6\" pad=\"20\"/>\n<connect gate=\"G$1\" pin=\"SCK_H/IO14\" pad=\"13\"/>\n<connect gate=\"G$1\" pin=\"SCK_V/IO18\" pad=\"30\"/>\n<connect gate=\"G$1\" pin=\"SCS/IO11\" pad=\"19\"/>\n<connect gate=\"G$1\" pin=\"SDI/IO8\" pad=\"22\"/>\n<connect gate=\"G$1\" pin=\"SDO/IO7\" pad=\"21\"/>\n<connect gate=\"G$1\" pin=\"SENSOR_VN/I39\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"SENSOR_VP/I36\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"SHD/IO9\" pad=\"17\"/>\n<connect gate=\"G$1\" pin=\"SWP/IO10\" pad=\"18\"/>\n<connect gate=\"G$1\" pin=\"TXD\" pad=\"35\"/>\n<connect gate=\"G$1\" pin=\"XTAL_N/IO33\" pad=\"9\"/>\n<connect gate=\"G$1\" pin=\"XTAL_P/IO32\" pad=\"8\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"IC-13849\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-Resistors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"AXIAL-0.3\">\n<description>&lt;h3&gt;AXIAL-0.3&lt;/h3&gt;\n&lt;p&gt;Commonly used for 1/4W through-hole resistors. 0.3\" pitch between holes.&lt;/p&gt;</description>\n<wire x1=\"-2.54\" y1=\"0.762\" x2=\"2.54\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"0.762\" x2=\"2.54\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.54\" y2=\"-0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-0.762\" x2=\"-2.54\" y2=\"-0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"-0.762\" x2=\"-2.54\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-2.54\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.794\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-2.794\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-3.81\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\"/>\n<pad name=\"P$2\" x=\"3.81\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\"/>\n<text x=\"0\" y=\"1.016\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;Name</text>\n<text x=\"0\" y=\"-1.016\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;Value</text>\n</package>\n<package name=\"AXIAL-0.1\">\n<description>&lt;h3&gt;AXIAL-0.1&lt;/h3&gt;\n&lt;p&gt;Commonly used for 1/4W through-hole resistors. 0.1\" pitch between holes.&lt;/p&gt;</description>\n<wire x1=\"0\" y1=\"-0.762\" x2=\"0\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.254\" y1=\"0\" x2=\"0\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"-0.254\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-1.27\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\"/>\n<pad name=\"P$2\" x=\"1.27\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\"/>\n<text x=\"0\" y=\"1.143\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;Name</text>\n<text x=\"0\" y=\"-1.143\" size=\"0.6096\" layer=\"21\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;Value</text>\n</package>\n<package name=\"AXIAL-0.1-KIT\">\n<description>&lt;h3&gt;AXIAL-0.1-KIT&lt;/h3&gt;\n&lt;p&gt;Commonly used for 1/4W through-hole resistors. 0.1\" pitch between holes.&lt;/p&gt;\n&lt;p&gt;&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.&lt;/p&gt;</description>\n<wire x1=\"0\" y1=\"-0.762\" x2=\"0\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.254\" y1=\"0\" x2=\"0\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"-0.254\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-1.27\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\" stop=\"no\"/>\n<pad name=\"P$2\" x=\"1.27\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\" stop=\"no\"/>\n<text x=\"0\" y=\"1.143\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;Name</text>\n<text x=\"0\" y=\"-1.143\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;Value</text>\n<circle x=\"-1.27\" y=\"0\" radius=\"0.4572\" width=\"0\" layer=\"29\"/>\n<circle x=\"-1.27\" y=\"0\" radius=\"1.016\" width=\"0\" layer=\"30\"/>\n<circle x=\"1.27\" y=\"0\" radius=\"1.016\" width=\"0\" layer=\"30\"/>\n<circle x=\"-1.27\" y=\"0\" radius=\"0.4572\" width=\"0\" layer=\"29\"/>\n<circle x=\"1.27\" y=\"0\" radius=\"0.4572\" width=\"0\" layer=\"29\"/>\n</package>\n<package name=\"AXIAL-0.3-KIT\">\n<description>&lt;h3&gt;AXIAL-0.3-KIT&lt;/h3&gt;\n&lt;p&gt;Commonly used for 1/4W through-hole resistors. 0.3\" pitch between holes.&lt;/p&gt;\n&lt;p&gt;&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.&lt;/p&gt;</description>\n<wire x1=\"-2.54\" y1=\"1.27\" x2=\"2.54\" y2=\"1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"1.27\" x2=\"2.54\" y2=\"0\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.54\" y2=\"-1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-1.27\" x2=\"-2.54\" y2=\"-1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"-1.27\" x2=\"-2.54\" y2=\"0\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-2.54\" y2=\"1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.794\" y2=\"0\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-2.794\" y2=\"0\" width=\"0.254\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-3.81\" y=\"0\" drill=\"1.016\" diameter=\"2.032\" stop=\"no\"/>\n<pad name=\"P$2\" x=\"3.81\" y=\"0\" drill=\"1.016\" diameter=\"2.032\" stop=\"no\"/>\n<text x=\"0\" y=\"1.524\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.524\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"3.8201\" y=\"-0.9449\" curve=\"-90\"/>\n<vertex x=\"2.8652\" y=\"-0.0152\" curve=\"-90.011749\"/>\n<vertex x=\"3.8176\" y=\"0.9602\" curve=\"-90\"/>\n<vertex x=\"4.7676\" y=\"-0.0178\" curve=\"-90.024193\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"3.8176\" y=\"-0.4369\" curve=\"-90.012891\"/>\n<vertex x=\"3.3731\" y=\"-0.0127\" curve=\"-90\"/>\n<vertex x=\"3.8176\" y=\"0.4546\" curve=\"-90\"/>\n<vertex x=\"4.2595\" y=\"-0.0025\" curve=\"-90.012967\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-3.8075\" y=\"-0.9525\" curve=\"-90\"/>\n<vertex x=\"-4.7624\" y=\"-0.0228\" curve=\"-90.011749\"/>\n<vertex x=\"-3.81\" y=\"0.9526\" curve=\"-90\"/>\n<vertex x=\"-2.86\" y=\"-0.0254\" curve=\"-90.024193\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"-3.81\" y=\"-0.4445\" curve=\"-90.012891\"/>\n<vertex x=\"-4.2545\" y=\"-0.0203\" curve=\"-90\"/>\n<vertex x=\"-3.81\" y=\"0.447\" curve=\"-90\"/>\n<vertex x=\"-3.3681\" y=\"-0.0101\" curve=\"-90.012967\"/>\n</polygon>\n</package>\n<package name=\"0603\">\n<description>&lt;p&gt;&lt;b&gt;Generic 1608 (0603) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"0\" y=\"0.762\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.762\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"RESISTOR\">\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-2.159\" y2=\"1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-2.159\" y1=\"1.016\" x2=\"-1.524\" y2=\"-1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-1.524\" y1=\"-1.016\" x2=\"-0.889\" y2=\"1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-0.889\" y1=\"1.016\" x2=\"-0.254\" y2=\"-1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-0.254\" y1=\"-1.016\" x2=\"0.381\" y2=\"1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0.381\" y1=\"1.016\" x2=\"1.016\" y2=\"-1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.016\" y1=\"-1.016\" x2=\"1.651\" y2=\"1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.651\" y1=\"1.016\" x2=\"2.286\" y2=\"-1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.286\" y1=\"-1.016\" x2=\"2.54\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<text x=\"0\" y=\"1.524\" size=\"1.778\" layer=\"95\" font=\"vector\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.524\" size=\"1.778\" layer=\"96\" font=\"vector\" align=\"top-center\">&gt;VALUE</text>\n<pin name=\"2\" x=\"5.08\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R180\"/>\n<pin name=\"1\" x=\"-5.08\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"10KOHM\" prefix=\"R\">\n<description>&lt;h3&gt;10kΩ resistor&lt;/h3&gt;\n&lt;p&gt;A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"RESISTOR\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-HORIZ-1/4W-1%\" package=\"AXIAL-0.3\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-12183\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"10k\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT-1/4W-1%\" package=\"AXIAL-0.1\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-12183\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT_KIT-1/4W-1%\" package=\"AXIAL-0.1-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-12183\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"10k\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT-1/4W-5%\" package=\"AXIAL-0.1\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09435\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT_KIT-1/4W-5%\" package=\"AXIAL-0.1-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09435\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-HORIZ-1/4W-5%\" package=\"AXIAL-0.3\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09435\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-HORIZ_KIT-1/4W-5%\" package=\"AXIAL-0.3-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09435\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-HORIZ_KIT-1/4W-1%\" package=\"AXIAL-0.3-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-12183\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT-1/6W-5%\" package=\"AXIAL-0.1\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08375\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT_KIT-1/6W-5%\" package=\"AXIAL-0.1-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08375\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-HORIZ-1/6W-5%\" package=\"AXIAL-0.3\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08375\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-HORIZ_KIT-1/6W-5%\" package=\"AXIAL-0.3-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08375\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0603-1/10W-1%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"2.0KOHM1/10W5%(0603)\" prefix=\"R\" uservalue=\"yes\">\n<description>RES-08296</description>\n<gates>\n<gate name=\"G$1\" symbol=\"RESISTOR\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08296\"/>\n<attribute name=\"VALUE\" value=\"2.0k\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"27OHM1/10W1%(0603)\" prefix=\"R\" uservalue=\"yes\">\n<description>RES-09334</description>\n<gates>\n<gate name=\"G$1\" symbol=\"RESISTOR\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09334\"/>\n<attribute name=\"VALUE\" value=\"27\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"0603-RES\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09334\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-Capacitors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"0402\">\n<description>&lt;p&gt;&lt;b&gt;Generic 1005 (0402) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-0.2704\" y1=\"0.2286\" x2=\"0.2704\" y2=\"0.2286\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.2704\" y1=\"-0.2286\" x2=\"-0.2704\" y2=\"-0.2286\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.2\" y1=\"0.65\" x2=\"1.2\" y2=\"0.65\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.2\" y1=\"0.65\" x2=\"1.2\" y2=\"-0.65\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.2\" y1=\"-0.65\" x2=\"-1.2\" y2=\"-0.65\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.2\" y1=\"-0.65\" x2=\"-1.2\" y2=\"0.65\" width=\"0.0508\" layer=\"39\"/>\n<smd name=\"1\" x=\"-0.58\" y=\"0\" dx=\"0.85\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.58\" y=\"0\" dx=\"0.85\" dy=\"0.9\" layer=\"1\"/>\n<text x=\"0\" y=\"0.762\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.762\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-0.554\" y1=\"-0.3048\" x2=\"-0.254\" y2=\"0.3048\" layer=\"51\"/>\n<rectangle x1=\"0.2588\" y1=\"-0.3048\" x2=\"0.5588\" y2=\"0.3048\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n<package name=\"0603\">\n<description>&lt;p&gt;&lt;b&gt;Generic 1608 (0603) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"0\" y=\"0.762\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.762\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n<package name=\"CAP-PTH-SMALL-KIT\">\n<description>&lt;h3&gt;CAP-PTH-SMALL-KIT&lt;/h3&gt;\nCommonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>\n<wire x1=\"0\" y1=\"0.635\" x2=\"0\" y2=\"-0.635\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-2.667\" y1=\"1.27\" x2=\"2.667\" y2=\"1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.667\" y1=\"1.27\" x2=\"2.667\" y2=\"-1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.667\" y1=\"-1.27\" x2=\"-2.667\" y2=\"-1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-2.667\" y1=\"-1.27\" x2=\"-2.667\" y2=\"1.27\" width=\"0.254\" layer=\"21\"/>\n<pad name=\"1\" x=\"-1.397\" y=\"0\" drill=\"1.016\" diameter=\"2.032\" stop=\"no\"/>\n<pad name=\"2\" x=\"1.397\" y=\"0\" drill=\"1.016\" diameter=\"2.032\" stop=\"no\"/>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-1.4021\" y=\"-0.9475\" curve=\"-90\"/>\n<vertex x=\"-2.357\" y=\"-0.0178\" curve=\"-90.011749\"/>\n<vertex x=\"-1.4046\" y=\"0.9576\" curve=\"-90\"/>\n<vertex x=\"-0.4546\" y=\"-0.0204\" curve=\"-90.024193\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"-1.4046\" y=\"-0.4395\" curve=\"-90.012891\"/>\n<vertex x=\"-1.8491\" y=\"-0.0153\" curve=\"-90\"/>\n<vertex x=\"-1.4046\" y=\"0.452\" curve=\"-90\"/>\n<vertex x=\"-0.9627\" y=\"-0.0051\" curve=\"-90.012967\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"1.397\" y=\"-0.9475\" curve=\"-90\"/>\n<vertex x=\"0.4421\" y=\"-0.0178\" curve=\"-90.011749\"/>\n<vertex x=\"1.3945\" y=\"0.9576\" curve=\"-90\"/>\n<vertex x=\"2.3445\" y=\"-0.0204\" curve=\"-90.024193\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"1.3945\" y=\"-0.4395\" curve=\"-90.012891\"/>\n<vertex x=\"0.95\" y=\"-0.0153\" curve=\"-90\"/>\n<vertex x=\"1.3945\" y=\"0.452\" curve=\"-90\"/>\n<vertex x=\"1.8364\" y=\"-0.0051\" curve=\"-90.012967\"/>\n</polygon>\n</package>\n<package name=\"1206\">\n<description>&lt;p&gt;&lt;b&gt;Generic 3216 (1206) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-2.4\" y1=\"1.1\" x2=\"2.4\" y2=\"1.1\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"2.4\" y1=\"-1.1\" x2=\"-2.4\" y2=\"-1.1\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-2.4\" y1=\"-1.1\" x2=\"-2.4\" y2=\"1.1\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"2.4\" y1=\"1.1\" x2=\"2.4\" y2=\"-1.1\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.965\" y1=\"0.787\" x2=\"0.965\" y2=\"0.787\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.965\" y1=\"-0.787\" x2=\"0.965\" y2=\"-0.787\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.4\" y=\"0\" dx=\"1.6\" dy=\"1.8\" layer=\"1\"/>\n<smd name=\"2\" x=\"1.4\" y=\"0\" dx=\"1.6\" dy=\"1.8\" layer=\"1\"/>\n<text x=\"0\" y=\"1.143\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.143\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-1.7018\" y1=\"-0.8509\" x2=\"-0.9517\" y2=\"0.8491\" layer=\"51\"/>\n<rectangle x1=\"0.9517\" y1=\"-0.8491\" x2=\"1.7018\" y2=\"0.8509\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.4001\" x2=\"0.1999\" y2=\"0.4001\" layer=\"35\"/>\n</package>\n<package name=\"0805\">\n<description>&lt;p&gt;&lt;b&gt;Generic 2012 (0805) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<smd name=\"1\" x=\"-0.9\" y=\"0\" dx=\"0.8\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.9\" y=\"0\" dx=\"0.8\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"0\" y=\"0.889\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.889\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<wire x1=\"-1.5\" y1=\"0.8\" x2=\"1.5\" y2=\"0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.5\" y1=\"0.8\" x2=\"1.5\" y2=\"-0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.5\" y1=\"-0.8\" x2=\"-1.5\" y2=\"-0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.5\" y1=\"-0.8\" x2=\"-1.5\" y2=\"0.8\" width=\"0.0508\" layer=\"39\"/>\n</package>\n<package name=\"1210\">\n<description>&lt;p&gt;&lt;b&gt;Generic 3225 (1210) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-1.5365\" y1=\"1.1865\" x2=\"1.5365\" y2=\"1.1865\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5365\" y1=\"1.1865\" x2=\"1.5365\" y2=\"-1.1865\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5365\" y1=\"-1.1865\" x2=\"-1.5365\" y2=\"-1.1865\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.5365\" y1=\"-1.1865\" x2=\"-1.5365\" y2=\"1.1865\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.755\" y=\"0\" dx=\"1.27\" dy=\"2.06\" layer=\"1\"/>\n<smd name=\"2\" x=\"1.755\" y=\"0\" dx=\"1.27\" dy=\"2.06\" layer=\"1\"/>\n<text x=\"0\" y=\"1.397\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.397\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<wire x1=\"-2.59\" y1=\"1.45\" x2=\"2.59\" y2=\"1.45\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"2.59\" y1=\"1.45\" x2=\"2.59\" y2=\"-1.45\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"2.59\" y1=\"-1.45\" x2=\"-2.59\" y2=\"-1.45\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-2.59\" y1=\"-1.45\" x2=\"-2.59\" y2=\"1.45\" width=\"0.0508\" layer=\"39\"/>\n</package>\n<package name=\"0603-CAP\">\n<wire x1=\"-1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"0.027940625\" x2=\"0\" y2=\"-0.027940625\" width=\"0.381\" layer=\"21\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"0.762\" size=\"0.4064\" layer=\"25\" font=\"vector\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-1.143\" size=\"0.4064\" layer=\"27\" font=\"vector\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"CAP\">\n<wire x1=\"0\" y1=\"2.54\" x2=\"0\" y2=\"2.032\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"0.508\" width=\"0.1524\" layer=\"94\"/>\n<text x=\"1.524\" y=\"2.921\" size=\"1.778\" layer=\"95\" font=\"vector\">&gt;NAME</text>\n<text x=\"1.524\" y=\"-2.159\" size=\"1.778\" layer=\"96\" font=\"vector\">&gt;VALUE</text>\n<rectangle x1=\"-2.032\" y1=\"0.508\" x2=\"2.032\" y2=\"1.016\" layer=\"94\"/>\n<rectangle x1=\"-2.032\" y1=\"1.524\" x2=\"2.032\" y2=\"2.032\" layer=\"94\"/>\n<pin name=\"1\" x=\"0\" y=\"5.08\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R270\"/>\n<pin name=\"2\" x=\"0\" y=\"-2.54\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R90\"/>\n</symbol>\n<symbol name=\"CAP@1\">\n<wire x1=\"0\" y1=\"2.54\" x2=\"0\" y2=\"2.032\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"0.508\" width=\"0.1524\" layer=\"94\"/>\n<text x=\"1.524\" y=\"2.921\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"1.524\" y=\"-2.159\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<rectangle x1=\"-2.032\" y1=\"0.508\" x2=\"2.032\" y2=\"1.016\" layer=\"94\"/>\n<rectangle x1=\"-2.032\" y1=\"1.524\" x2=\"2.032\" y2=\"2.032\" layer=\"94\"/>\n<pin name=\"1\" x=\"0\" y=\"5.08\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R270\"/>\n<pin name=\"2\" x=\"0\" y=\"-2.54\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R90\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"0.1UF\" prefix=\"C\">\n<description>&lt;h3&gt;0.1µF ceramic capacitors&lt;/h3&gt;\n&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-0402-16V-10%\" package=\"0402\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-12416\"/>\n<attribute name=\"VALUE\" value=\"0.1uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0603-25V-(+80/-20%)\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\"/>\n<attribute name=\"VALUE\" value=\"0.1uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0603-25V-5%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08604\"/>\n<attribute name=\"VALUE\" value=\"0.1uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-KIT-EZ-50V-20%\" package=\"CAP-PTH-SMALL-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08370\"/>\n<attribute name=\"VALUE\" value=\"0.1uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0603-100V-10%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08390\"/>\n<attribute name=\"VALUE\" value=\"0.1uF\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"10UF\" prefix=\"C\">\n<description>&lt;h3&gt;10.0µF ceramic capacitors&lt;/h3&gt;\n&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-0603-6.3V-20%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-11015\"/>\n<attribute name=\"VALUE\" value=\"10uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-1206-6.3V-20%\" package=\"1206\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-10057\"/>\n<attribute name=\"VALUE\" value=\"10uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0805-10V-10%\" package=\"0805\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-11330\"/>\n<attribute name=\"VALUE\" value=\"10uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-1210-50V-20%\" package=\"1210\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-09824\"/>\n<attribute name=\"VALUE\" value=\"10uF\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"4.7UF\" prefix=\"C\">\n<description>&lt;h3&gt;4.7µF ceramic capacitors&lt;/h3&gt;\n&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP\" x=\"0\" y=\"-2.54\"/>\n</gates>\n<devices>\n<device name=\"0603\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08280\"/>\n<attribute name=\"VALUE\" value=\"4.7uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-1206-16V-(+80/-20%)\" package=\"1206\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"47PF\" prefix=\"C\">\n<description>&lt;h3&gt;47pF ceramic capacitors&lt;/h3&gt;\n&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-0603-50V-5%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08913\"/>\n<attribute name=\"VALUE\" value=\"47pF\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"4.7UF-6.3V-10%(0603)\" prefix=\"C\" uservalue=\"yes\">\n<description>CAP-08280</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP@1\" x=\"0\" y=\"-2.54\"/>\n</gates>\n<devices>\n<device name=\"0603\" package=\"0603-CAP\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08280\"/>\n<attribute name=\"VALUE\" value=\"4.7uF\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"1.0UF\" prefix=\"C\">\n<description>&lt;h3&gt;1µF ceramic capacitors&lt;/h3&gt;\n&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-0603-16V-10%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-00868\"/>\n<attribute name=\"VALUE\" value=\"1.0uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0402-16V-10%\" package=\"0402\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-12417\"/>\n<attribute name=\"VALUE\" value=\"1.0uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0805-25V-(+80/-20%)\" package=\"0805\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-11625\"/>\n<attribute name=\"VALUE\" value=\"1.0uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-1206-50V-10%\" package=\"1206\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-09822\"/>\n<attribute name=\"VALUE\" value=\"1.0uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0805-25V-10%\" package=\"0805\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08064\"/>\n<attribute name=\"VALUE\" value=\"1.0uF\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-PowerSymbols\">\n<description>&lt;h3&gt;SparkFun Power Symbols&lt;/h3&gt;\nThis library contains power, ground, and voltage-supply symbols.\n&lt;br&gt;\n&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. \n&lt;br&gt;\n&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=\" www.sparkfun.com\"&gt;SparkFun.com&lt;/a&gt;.\n&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;\n&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n</packages>\n<symbols>\n<symbol name=\"3.3V\">\n<description>&lt;h3&gt;3.3V Voltage Supply&lt;/h3&gt;</description>\n<wire x1=\"0.762\" y1=\"1.27\" x2=\"0\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"-0.762\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<pin name=\"3.3V\" x=\"0\" y=\"0\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R90\"/>\n<text x=\"0\" y=\"2.794\" size=\"1.778\" layer=\"96\" align=\"bottom-center\">&gt;VALUE</text>\n</symbol>\n<symbol name=\"DGND\">\n<description>&lt;h3&gt;Digital Ground Supply&lt;/h3&gt;</description>\n<wire x1=\"-1.905\" y1=\"0\" x2=\"1.905\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<pin name=\"GND\" x=\"0\" y=\"2.54\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R270\"/>\n<text x=\"0\" y=\"-0.254\" size=\"1.778\" layer=\"96\" align=\"top-center\">&gt;VALUE</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"3.3V\" prefix=\"SUPPLY\">\n<description>&lt;h3&gt;3.3V Supply Symbol&lt;/h3&gt;\n&lt;p&gt;Power supply symbol for a specifically-stated 3.3V source.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"3.3V\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"GND\" prefix=\"GND\">\n<description>&lt;h3&gt;Ground Supply Symbol&lt;/h3&gt;\n&lt;p&gt;Generic signal ground supply symbol.&lt;/p&gt;</description>\n<gates>\n<gate name=\"1\" symbol=\"DGND\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"esp32-thing-temp\">\n<packages>\n<package name=\"SC70-6\">\n<description>&lt;h3&gt;SC-88/SC70-6/SOT-363 6-pin Package&lt;/h3&gt;\n&lt;p&gt;&lt;a href=\"http://www.onsemi.com/pub_link/Collateral/MBT3904DW1T1-D.PDF\"&gt;Example Datasheet&lt;/a&gt;&lt;/p&gt;</description>\n<circle x=\"-1.3335\" y=\"-1.016\" radius=\"0.254\" width=\"0\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"0.625\" x2=\"-1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"0.625\" x2=\"-1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1\" y1=\"-0.625\" x2=\"1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.1176\" y1=\"0.7493\" x2=\"-1.1176\" y2=\"-0.6223\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.1176\" y1=\"-0.7493\" x2=\"1.1176\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.9779\" y1=\"0.7493\" x2=\"-1.1176\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.1176\" y1=\"0.7493\" x2=\"0.9779\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.1176\" y1=\"-0.6223\" x2=\"-0.9779\" y2=\"-0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.9779\" y1=\"-0.7493\" x2=\"1.1176\" y2=\"-0.7493\" width=\"0.2032\" layer=\"21\"/>\n<rectangle x1=\"-0.1016\" y1=\"0.6858\" x2=\"0.1016\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.1016\" y1=\"-1.0414\" x2=\"0.1016\" y2=\"-0.6858\" layer=\"51\"/>\n<rectangle x1=\"0.5484\" y1=\"0.6858\" x2=\"0.7516\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.7516\" y1=\"0.6858\" x2=\"-0.5484\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.7516\" y1=\"-1.0414\" x2=\"-0.5484\" y2=\"-0.6858\" layer=\"51\"/>\n<rectangle x1=\"0.5484\" y1=\"-1.0414\" x2=\"0.7516\" y2=\"-0.6858\" layer=\"51\"/>\n<smd name=\"4\" x=\"0.65\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<smd name=\"2\" x=\"0\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"1\" x=\"-0.65\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"0.65\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"5\" x=\"0\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<smd name=\"6\" x=\"-0.65\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<text x=\"0\" y=\"1.397\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.397\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n</package>\n</packages>\n<symbols>\n<symbol name=\"NPN\">\n<rectangle x1=\"-0.254\" y1=\"-2.54\" x2=\"0.508\" y2=\"2.54\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"2.54\" x2=\"0.508\" y2=\"1.524\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.778\" y1=\"-1.524\" x2=\"2.54\" y2=\"-2.54\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-2.54\" x2=\"1.27\" y2=\"-2.54\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"-2.54\" x2=\"1.778\" y2=\"-1.524\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.54\" y1=\"-2.04\" x2=\"0.308\" y2=\"-1.424\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.524\" y1=\"-2.413\" x2=\"2.286\" y2=\"-2.413\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"2.286\" y1=\"-2.413\" x2=\"1.778\" y2=\"-1.778\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.778\" y1=\"-1.778\" x2=\"1.524\" y2=\"-2.286\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.524\" y1=\"-2.286\" x2=\"1.905\" y2=\"-2.286\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.905\" y1=\"-2.286\" x2=\"1.778\" y2=\"-2.032\" width=\"0.254\" layer=\"94\"/>\n<pin name=\"B\" x=\"-2.54\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\"/>\n<pin name=\"C\" x=\"2.54\" y=\"5.08\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"2\" rot=\"R270\"/>\n<pin name=\"E\" x=\"2.54\" y=\"-5.08\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"3\" rot=\"R90\"/>\n<text x=\"2.54\" y=\"1.27\" size=\"1.778\" layer=\"95\" font=\"vector\" align=\"center-left\">&gt;NAME</text>\n<text x=\"2.54\" y=\"-1.27\" size=\"1.778\" layer=\"96\" font=\"vector\" align=\"center-left\">&gt;VALUE</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"MBT3904DW1T1\" prefix=\"Q\" uservalue=\"yes\">\n<description>&lt;h3&gt;MBT3904DW1 Dual NPN Transistors&lt;/h3&gt;\n&lt;p&gt;The MBT3904W1 puts two general purpose 3904 NPN transistors in a single package.&lt;/p&gt;\n&lt;p&gt;&lt;a href=\"http://www.onsemi.com/pub_link/Collateral/MBT3904DW1T1-D.PDF\"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;</description>\n<gates>\n<gate name=\"Q1\" symbol=\"NPN\" x=\"0\" y=\"7.62\"/>\n<gate name=\"Q2\" symbol=\"NPN\" x=\"0\" y=\"-7.62\" swaplevel=\"1\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"SC70-6\">\n<connects>\n<connect gate=\"Q1\" pin=\"B\" pad=\"5\"/>\n<connect gate=\"Q1\" pin=\"C\" pad=\"3\"/>\n<connect gate=\"Q1\" pin=\"E\" pad=\"4\"/>\n<connect gate=\"Q2\" pin=\"B\" pad=\"2\"/>\n<connect gate=\"Q2\" pin=\"C\" pad=\"6\"/>\n<connect gate=\"Q2\" pin=\"E\" pad=\"1\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"TRANS-13337\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-Aesthetics\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n</packages>\n<symbols>\n<symbol name=\"DGND\">\n<wire x1=\"-1.905\" y1=\"0\" x2=\"1.905\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"-2.54\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"GND\" x=\"0\" y=\"2.54\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R270\"/>\n</symbol>\n<symbol name=\"V_USB\">\n<wire x1=\"0.762\" y1=\"1.27\" x2=\"0\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"-0.762\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-1.016\" y=\"3.556\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"V_USB\" x=\"0\" y=\"0\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R90\"/>\n</symbol>\n<symbol name=\"V_BATT\">\n<wire x1=\"0.762\" y1=\"1.27\" x2=\"0\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"-0.762\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-1.016\" y=\"3.556\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"V_BATT\" x=\"0\" y=\"0\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R90\"/>\n</symbol>\n<symbol name=\"3.3V\">\n<wire x1=\"0.762\" y1=\"1.27\" x2=\"0\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"-0.762\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-1.016\" y=\"3.556\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"3.3V\" x=\"0\" y=\"0\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R90\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"GND\" prefix=\"GND\">\n<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>\n<gates>\n<gate name=\"1\" symbol=\"DGND\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"V_USB\" prefix=\"SUPPLY\">\n<gates>\n<gate name=\"G$1\" symbol=\"V_USB\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"V_BATT\" prefix=\"SUPPLY\">\n<description>&lt;b&gt;V_BATT&lt;/b&gt;&lt;br&gt;\nGeneric symbol for the battery input to a system.</description>\n<gates>\n<gate name=\"G$1\" symbol=\"V_BATT\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"3.3V\" prefix=\"SUPPLY\">\n<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"3.3V\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-Connectors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"1X02\">\n<wire x1=\"-0.635\" y1=\"1.27\" x2=\"0.635\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.635\" y1=\"1.27\" x2=\"1.27\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.27\" y1=\"-0.635\" x2=\"0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.27\" y1=\"0.635\" x2=\"1.905\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.905\" y1=\"1.27\" x2=\"3.175\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.175\" y1=\"1.27\" x2=\"3.81\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-0.635\" x2=\"3.175\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.175\" y1=\"-1.27\" x2=\"1.905\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.905\" y1=\"-1.27\" x2=\"1.27\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0.635\" x2=\"-1.27\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.635\" y1=\"1.27\" x2=\"-1.27\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"-0.635\" x2=\"-0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.635\" y1=\"-1.27\" x2=\"-0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0.635\" x2=\"3.81\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<text x=\"-1.3462\" y=\"1.8288\" size=\"1.27\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"-3.175\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n<rectangle x1=\"2.286\" y1=\"-0.254\" x2=\"2.794\" y2=\"0.254\" layer=\"51\"/>\n<rectangle x1=\"-0.254\" y1=\"-0.254\" x2=\"0.254\" y2=\"0.254\" layer=\"51\"/>\n</package>\n<package name=\"MOLEX-1X2\">\n<wire x1=\"-1.27\" y1=\"3.048\" x2=\"-1.27\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"3.048\" x2=\"3.81\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"3.048\" x2=\"-1.27\" y2=\"3.048\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-2.54\" x2=\"2.54\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-2.54\" x2=\"0\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-2.54\" x2=\"-1.27\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-2.54\" x2=\"0\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-1.27\" x2=\"2.54\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-1.27\" x2=\"2.54\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" shape=\"square\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\"/>\n</package>\n<package name=\"SCREWTERMINAL-3.5MM-2\">\n<circle x=\"2\" y=\"3\" radius=\"0.2828\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.75\" y1=\"3.4\" x2=\"5.25\" y2=\"3.4\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"3.4\" x2=\"5.25\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"5.25\" y2=\"-3.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-3.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-2.8\" x2=\"-1.75\" y2=\"3.4\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-1.35\" x2=\"-2.25\" y2=\"-1.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.25\" y1=\"-1.35\" x2=\"-2.25\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.25\" y1=\"-2.35\" x2=\"-1.75\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"3.15\" x2=\"5.75\" y2=\"3.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.75\" y1=\"3.15\" x2=\"5.75\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.75\" y1=\"2.15\" x2=\"5.25\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.2\" diameter=\"2.032\" shape=\"square\"/>\n<pad name=\"2\" x=\"3.5\" y=\"0\" drill=\"1.2\" diameter=\"2.032\"/>\n<text x=\"-1.27\" y=\"2.54\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"JST-2-SMD\">\n<description>2mm SMD side-entry connector. tDocu layer indicates the actual physical plastic housing. +/- indicate SparkFun standard batteries and wiring.</description>\n<wire x1=\"-4\" y1=\"-1\" x2=\"-4\" y2=\"-4.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4\" y1=\"-4.5\" x2=\"-3.2\" y2=\"-4.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.2\" y1=\"-4.5\" x2=\"-3.2\" y2=\"-2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.2\" y1=\"-2\" x2=\"-2\" y2=\"-2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2\" y1=\"-2\" x2=\"3.2\" y2=\"-2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2\" y1=\"-2\" x2=\"3.2\" y2=\"-4.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2\" y1=\"-4.5\" x2=\"4\" y2=\"-4.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4\" y1=\"-4.5\" x2=\"4\" y2=\"-1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2\" y1=\"3\" x2=\"-2\" y2=\"3\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-1\" y=\"-3.7\" dx=\"1\" dy=\"4.6\" layer=\"1\"/>\n<smd name=\"2\" x=\"1\" y=\"-3.7\" dx=\"1\" dy=\"4.6\" layer=\"1\"/>\n<smd name=\"NC1\" x=\"-3.4\" y=\"1.5\" dx=\"3.4\" dy=\"1.6\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"NC2\" x=\"3.4\" y=\"1.5\" dx=\"3.4\" dy=\"1.6\" layer=\"1\" rot=\"R90\"/>\n<text x=\"-1.27\" y=\"1.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"0\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"1X02_BIG\">\n<wire x1=\"-1.27\" y1=\"1.27\" x2=\"-1.27\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"-1.27\" x2=\"5.08\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"-1.27\" x2=\"5.08\" y2=\"1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"1.27\" x2=\"-1.27\" y2=\"1.27\" width=\"0.127\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"0\" y=\"0\" drill=\"1.0668\"/>\n<pad name=\"P$2\" x=\"3.81\" y=\"0\" drill=\"1.0668\"/>\n</package>\n<package name=\"JST-2-SMD-VERT\">\n<wire x1=\"-4.1\" y1=\"2.97\" x2=\"4.2\" y2=\"2.97\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"4.2\" y1=\"2.97\" x2=\"4.2\" y2=\"-2.13\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"4.2\" y1=\"-2.13\" x2=\"-4.1\" y2=\"-2.13\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-4.1\" y1=\"-2.13\" x2=\"-4.1\" y2=\"2.97\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-4.1\" y1=\"3\" x2=\"4.2\" y2=\"3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4.2\" y1=\"3\" x2=\"4.2\" y2=\"2.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.1\" y1=\"3\" x2=\"-4.1\" y2=\"2.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2\" y1=\"-2.1\" x2=\"4.2\" y2=\"-2.1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4.2\" y1=\"-2.1\" x2=\"4.2\" y2=\"-1.7\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2\" y1=\"-2.1\" x2=\"-4.1\" y2=\"-2.1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.1\" y1=\"-2.1\" x2=\"-4.1\" y2=\"-1.8\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"P$1\" x=\"-3.4\" y=\"0.27\" dx=\"3\" dy=\"1.6\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"P$2\" x=\"3.4\" y=\"0.27\" dx=\"3\" dy=\"1.6\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"VCC\" x=\"-1\" y=\"-2\" dx=\"1\" dy=\"5.5\" layer=\"1\"/>\n<smd name=\"GND\" x=\"1\" y=\"-2\" dx=\"1\" dy=\"5.5\" layer=\"1\"/>\n<text x=\"2.54\" y=\"-5.08\" size=\"1.27\" layer=\"25\">&gt;Name</text>\n<text x=\"2.24\" y=\"3.48\" size=\"1.27\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"R_SW_TH\">\n<wire x1=\"-1.651\" y1=\"19.2532\" x2=\"-1.651\" y2=\"-1.3716\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.651\" y1=\"-1.3716\" x2=\"-1.651\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.651\" y1=\"19.2532\" x2=\"13.589\" y2=\"19.2532\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"13.589\" y1=\"19.2532\" x2=\"13.589\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"13.589\" y1=\"-2.2352\" x2=\"-1.651\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"0\" y=\"0\" drill=\"1.6002\"/>\n<pad name=\"P$2\" x=\"0\" y=\"16.9926\" drill=\"1.6002\"/>\n<pad name=\"P$3\" x=\"12.0904\" y=\"15.494\" drill=\"1.6002\"/>\n<pad name=\"P$4\" x=\"12.0904\" y=\"8.4582\" drill=\"1.6002\"/>\n</package>\n<package name=\"SCREWTERMINAL-5MM-2\">\n<wire x1=\"-3.1\" y1=\"4.2\" x2=\"8.1\" y2=\"4.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.1\" y1=\"4.2\" x2=\"8.1\" y2=\"-2.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.1\" y1=\"-2.3\" x2=\"8.1\" y2=\"-3.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.1\" y1=\"-3.3\" x2=\"-3.1\" y2=\"-3.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.1\" y1=\"-3.3\" x2=\"-3.1\" y2=\"-2.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.1\" y1=\"-2.3\" x2=\"-3.1\" y2=\"4.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.1\" y1=\"-2.3\" x2=\"-3.1\" y2=\"-2.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.1\" y1=\"-1.35\" x2=\"-3.7\" y2=\"-1.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.7\" y1=\"-1.35\" x2=\"-3.7\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.7\" y1=\"-2.35\" x2=\"-3.1\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"8.1\" y1=\"4\" x2=\"8.7\" y2=\"4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"8.7\" y1=\"4\" x2=\"8.7\" y2=\"3\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"8.7\" y1=\"3\" x2=\"8.1\" y2=\"3\" width=\"0.2032\" layer=\"51\"/>\n<circle x=\"2.5\" y=\"3.7\" radius=\"0.2828\" width=\"0.127\" layer=\"51\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.3\" diameter=\"2.032\" shape=\"square\"/>\n<pad name=\"2\" x=\"5\" y=\"0\" drill=\"1.3\" diameter=\"2.032\"/>\n<text x=\"-1.27\" y=\"2.54\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"1X02_LOCK\">\n<wire x1=\"-0.635\" y1=\"1.27\" x2=\"0.635\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.635\" y1=\"1.27\" x2=\"1.27\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.27\" y1=\"-0.635\" x2=\"0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.27\" y1=\"0.635\" x2=\"1.905\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.905\" y1=\"1.27\" x2=\"3.175\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.175\" y1=\"1.27\" x2=\"3.81\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-0.635\" x2=\"3.175\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.175\" y1=\"-1.27\" x2=\"1.905\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.905\" y1=\"-1.27\" x2=\"1.27\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0.635\" x2=\"-1.27\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.635\" y1=\"1.27\" x2=\"-1.27\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"-0.635\" x2=\"-0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.635\" y1=\"-1.27\" x2=\"-0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0.635\" x2=\"3.81\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"-0.1778\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.7178\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<text x=\"-1.3462\" y=\"1.8288\" size=\"1.27\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"-3.175\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n<rectangle x1=\"-0.2921\" y1=\"-0.2921\" x2=\"0.2921\" y2=\"0.2921\" layer=\"51\"/>\n<rectangle x1=\"2.2479\" y1=\"-0.2921\" x2=\"2.8321\" y2=\"0.2921\" layer=\"51\"/>\n</package>\n<package name=\"MOLEX-1X2_LOCK\">\n<wire x1=\"-1.27\" y1=\"3.048\" x2=\"-1.27\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"3.048\" x2=\"3.81\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"3.048\" x2=\"-1.27\" y2=\"3.048\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-2.54\" x2=\"2.54\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-2.54\" x2=\"0\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-2.54\" x2=\"-1.27\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-2.54\" x2=\"0\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-1.27\" x2=\"2.54\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-1.27\" x2=\"2.54\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<pad name=\"1\" x=\"-0.127\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" shape=\"square\"/>\n<pad name=\"2\" x=\"2.667\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\"/>\n<rectangle x1=\"-0.2921\" y1=\"-0.2921\" x2=\"0.2921\" y2=\"0.2921\" layer=\"51\"/>\n<rectangle x1=\"2.2479\" y1=\"-0.2921\" x2=\"2.8321\" y2=\"0.2921\" layer=\"51\"/>\n</package>\n<package name=\"1X02_LOCK_LONGPADS\">\n<description>This footprint was designed to help hold the alignment of a through-hole component (i.e.  6-pin header) while soldering it into place.  \nYou may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).  \nThis slight alteration caused the pins (the squares in the middle) to touch the edges of the holes.  Because they are alternating, it causes a \"brace\" \nto hold the component in place.  0.005 has proven to be the perfect amount of \"off-center\" position when using our standard breakaway headers.\nAlthough looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice.  Also,\nif you push a header all the way into place, it is covered up entirely on the bottom side.  This idea of altering the position of holes to aid alignment \nwill be further integrated into the Sparkfun Library for other footprints.  It can help hold any component with 3 or more connection pins.</description>\n<wire x1=\"1.651\" y1=\"0\" x2=\"0.889\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0\" x2=\"-1.016\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0\" x2=\"-1.27\" y2=\"0.9906\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0.9906\" x2=\"-0.9906\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0\" x2=\"-1.27\" y2=\"-0.9906\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"-0.9906\" x2=\"-0.9906\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0\" x2=\"3.556\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0\" x2=\"3.81\" y2=\"-0.9906\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-0.9906\" x2=\"3.5306\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0\" x2=\"3.81\" y2=\"0.9906\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0.9906\" x2=\"3.5306\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"-0.127\" y=\"0\" drill=\"1.016\" shape=\"long\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.667\" y=\"0\" drill=\"1.016\" shape=\"long\" rot=\"R90\"/>\n<text x=\"-1.27\" y=\"1.778\" size=\"1.27\" layer=\"25\" font=\"vector\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"-3.302\" size=\"1.27\" layer=\"27\" font=\"vector\">&gt;VALUE</text>\n<rectangle x1=\"-0.2921\" y1=\"-0.2921\" x2=\"0.2921\" y2=\"0.2921\" layer=\"51\"/>\n<rectangle x1=\"2.2479\" y1=\"-0.2921\" x2=\"2.8321\" y2=\"0.2921\" layer=\"51\"/>\n</package>\n<package name=\"SCREWTERMINAL-3.5MM-2_LOCK\">\n<wire x1=\"-1.75\" y1=\"3.4\" x2=\"5.25\" y2=\"3.4\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"3.4\" x2=\"5.25\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"5.25\" y2=\"-3.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-3.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-2.8\" x2=\"-1.75\" y2=\"3.4\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-1.35\" x2=\"-2.15\" y2=\"-1.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.15\" y1=\"-1.35\" x2=\"-2.15\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.15\" y1=\"-2.35\" x2=\"-1.75\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"3.15\" x2=\"5.65\" y2=\"3.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.65\" y1=\"3.15\" x2=\"5.65\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.65\" y1=\"2.15\" x2=\"5.25\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<circle x=\"2\" y=\"3\" radius=\"0.2828\" width=\"0.127\" layer=\"51\"/>\n<circle x=\"0\" y=\"0\" radius=\"0.4318\" width=\"0.0254\" layer=\"51\"/>\n<circle x=\"3.5\" y=\"0\" radius=\"0.4318\" width=\"0.0254\" layer=\"51\"/>\n<pad name=\"1\" x=\"-0.1778\" y=\"0\" drill=\"1.2\" diameter=\"2.032\" shape=\"square\"/>\n<pad name=\"2\" x=\"3.6778\" y=\"0\" drill=\"1.2\" diameter=\"2.032\"/>\n<text x=\"-1.27\" y=\"2.54\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"1X02_LONGPADS\">\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.1176\" diameter=\"1.8796\" shape=\"long\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"1.1176\" diameter=\"1.8796\" shape=\"long\" rot=\"R90\"/>\n</package>\n<package name=\"1X02_NO_SILK\">\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<text x=\"-1.3462\" y=\"1.8288\" size=\"1.27\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"-3.175\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n<rectangle x1=\"2.286\" y1=\"-0.254\" x2=\"2.794\" y2=\"0.254\" layer=\"51\"/>\n<rectangle x1=\"-0.254\" y1=\"-0.254\" x2=\"0.254\" y2=\"0.254\" layer=\"51\"/>\n</package>\n<package name=\"JST-2-PTH\">\n<pad name=\"1\" x=\"-1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<pad name=\"2\" x=\"1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<text x=\"-1.27\" y=\"5.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"4\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<text x=\"0.6\" y=\"0.7\" size=\"1.27\" layer=\"51\">+</text>\n<text x=\"-1.4\" y=\"0.7\" size=\"1.27\" layer=\"51\">-</text>\n<wire x1=\"-2.95\" y1=\"-1.6\" x2=\"-2.95\" y2=\"6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.95\" y1=\"6\" x2=\"2.95\" y2=\"6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"6\" x2=\"2.95\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.95\" y1=\"-1.6\" x2=\"-2.3\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"-1.6\" x2=\"2.3\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.3\" y1=\"-1.6\" x2=\"-2.3\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.3\" y1=\"-1.6\" x2=\"2.3\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n</package>\n<package name=\"1X02_XTRA_BIG\">\n<wire x1=\"-5.08\" y1=\"2.54\" x2=\"-5.08\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.08\" y1=\"-2.54\" x2=\"5.08\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"-2.54\" x2=\"5.08\" y2=\"2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"2.54\" x2=\"-5.08\" y2=\"2.54\" width=\"0.127\" layer=\"21\"/>\n<pad name=\"1\" x=\"-2.54\" y=\"0\" drill=\"2.0574\" diameter=\"3.556\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"2.0574\" diameter=\"3.556\"/>\n</package>\n<package name=\"1X02_PP_HOLES_ONLY\">\n<circle x=\"0\" y=\"0\" radius=\"0.635\" width=\"0.127\" layer=\"51\"/>\n<circle x=\"2.54\" y=\"0\" radius=\"0.635\" width=\"0.127\" layer=\"51\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"0.889\" diameter=\"0.8128\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"0.889\" diameter=\"0.8128\" rot=\"R90\"/>\n<hole x=\"0\" y=\"0\" drill=\"1.4732\"/>\n<hole x=\"2.54\" y=\"0\" drill=\"1.4732\"/>\n</package>\n<package name=\"SCREWTERMINAL-3.5MM-2-NS\">\n<wire x1=\"-1.75\" y1=\"3.4\" x2=\"5.25\" y2=\"3.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"3.4\" x2=\"5.25\" y2=\"-2.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"5.25\" y2=\"-3.6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-3.6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.75\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.75\" y1=\"-2.8\" x2=\"-1.75\" y2=\"3.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.75\" y1=\"-1.35\" x2=\"-2.15\" y2=\"-1.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.15\" y1=\"-1.35\" x2=\"-2.15\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.15\" y1=\"-2.35\" x2=\"-1.75\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"3.15\" x2=\"5.65\" y2=\"3.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.65\" y1=\"3.15\" x2=\"5.65\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.65\" y1=\"2.15\" x2=\"5.25\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<circle x=\"2\" y=\"3\" radius=\"0.2828\" width=\"0.127\" layer=\"51\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.2\" diameter=\"2.032\" shape=\"square\"/>\n<pad name=\"2\" x=\"3.5\" y=\"0\" drill=\"1.2\" diameter=\"2.032\"/>\n<text x=\"-1.27\" y=\"2.54\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"JST-2-PTH-NS\">\n<wire x1=\"-2\" y1=\"0\" x2=\"-2\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2\" y1=\"-1.8\" x2=\"-3\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3\" y1=\"-1.8\" x2=\"-3\" y2=\"6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3\" y1=\"6\" x2=\"3\" y2=\"6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3\" y1=\"6\" x2=\"3\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3\" y1=\"-1.8\" x2=\"2\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"-1.8\" x2=\"2\" y2=\"0\" width=\"0.2032\" layer=\"51\"/>\n<pad name=\"1\" x=\"-1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<pad name=\"2\" x=\"1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<text x=\"-1.27\" y=\"5.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"4\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<text x=\"0.6\" y=\"0.7\" size=\"1.27\" layer=\"51\">+</text>\n<text x=\"-1.4\" y=\"0.7\" size=\"1.27\" layer=\"51\">-</text>\n</package>\n<package name=\"JST-2-PTH-KIT\">\n<description>&lt;H3&gt;JST-2-PTH-KIT&lt;/h3&gt;\n2-Pin JST, through-hole connector&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>\n<wire x1=\"-2\" y1=\"0\" x2=\"-2\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2\" y1=\"-1.8\" x2=\"-3\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3\" y1=\"-1.8\" x2=\"-3\" y2=\"6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3\" y1=\"6\" x2=\"3\" y2=\"6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3\" y1=\"6\" x2=\"3\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3\" y1=\"-1.8\" x2=\"2\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"-1.8\" x2=\"2\" y2=\"0\" width=\"0.2032\" layer=\"51\"/>\n<pad name=\"1\" x=\"-1\" y=\"0\" drill=\"0.7\" diameter=\"1.4478\" stop=\"no\"/>\n<pad name=\"2\" x=\"1\" y=\"0\" drill=\"0.7\" diameter=\"1.4478\" stop=\"no\"/>\n<text x=\"-1.27\" y=\"5.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"4\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<text x=\"0.6\" y=\"0.7\" size=\"1.27\" layer=\"51\">+</text>\n<text x=\"-1.4\" y=\"0.7\" size=\"1.27\" layer=\"51\">-</text>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-0.9975\" y=\"-0.6604\" curve=\"-90.025935\"/>\n<vertex x=\"-1.6604\" y=\"0\" curve=\"-90.017354\"/>\n<vertex x=\"-1\" y=\"0.6604\" curve=\"-90\"/>\n<vertex x=\"-0.3396\" y=\"0\" curve=\"-90.078137\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"-1\" y=\"-0.2865\" curve=\"-90.08005\"/>\n<vertex x=\"-1.2865\" y=\"0\" curve=\"-90.040011\"/>\n<vertex x=\"-1\" y=\"0.2865\" curve=\"-90\"/>\n<vertex x=\"-0.7135\" y=\"0\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"1.0025\" y=\"-0.6604\" curve=\"-90.025935\"/>\n<vertex x=\"0.3396\" y=\"0\" curve=\"-90.017354\"/>\n<vertex x=\"1\" y=\"0.6604\" curve=\"-90\"/>\n<vertex x=\"1.6604\" y=\"0\" curve=\"-90.078137\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"1\" y=\"-0.2865\" curve=\"-90.08005\"/>\n<vertex x=\"0.7135\" y=\"0\" curve=\"-90.040011\"/>\n<vertex x=\"1\" y=\"0.2865\" curve=\"-90\"/>\n<vertex x=\"1.2865\" y=\"0\" curve=\"-90\"/>\n</polygon>\n</package>\n<package name=\"SPRINGTERMINAL-2.54MM-2\">\n<wire x1=\"-4.2\" y1=\"7.88\" x2=\"-4.2\" y2=\"-2.8\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-4.2\" y1=\"-2.8\" x2=\"-4.2\" y2=\"-4.72\" width=\"0.254\" layer=\"51\"/>\n<wire x1=\"-4.2\" y1=\"-4.72\" x2=\"3.44\" y2=\"-4.72\" width=\"0.254\" layer=\"51\"/>\n<wire x1=\"3.44\" y1=\"-4.72\" x2=\"3.44\" y2=\"-2.8\" width=\"0.254\" layer=\"51\"/>\n<wire x1=\"3.44\" y1=\"7.88\" x2=\"-4.2\" y2=\"7.88\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"5.08\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"5.08\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.54\" y2=\"5.08\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.54\" y2=\"5.08\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"-4.2\" y1=\"-2.8\" x2=\"3.44\" y2=\"-2.8\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"3.44\" y1=\"4\" x2=\"3.44\" y2=\"1\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"3.44\" y1=\"7.88\" x2=\"3.44\" y2=\"6\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"3.44\" y1=\"-0.9\" x2=\"3.44\" y2=\"-2.8\" width=\"0.254\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.1\" diameter=\"1.9\"/>\n<pad name=\"P$2\" x=\"0\" y=\"5.08\" drill=\"1.1\" diameter=\"1.9\"/>\n<pad name=\"P$3\" x=\"2.54\" y=\"5.08\" drill=\"1.1\" diameter=\"1.9\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"1.1\" diameter=\"1.9\"/>\n</package>\n<package name=\"1X02_2.54_SCREWTERM\">\n<pad name=\"P2\" x=\"0\" y=\"0\" drill=\"1.016\" shape=\"square\"/>\n<pad name=\"P1\" x=\"2.54\" y=\"0\" drill=\"1.016\" shape=\"square\"/>\n<wire x1=\"-1.5\" y1=\"3.25\" x2=\"4\" y2=\"3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4\" y1=\"3.25\" x2=\"4\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4\" y1=\"2.5\" x2=\"4\" y2=\"-3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4\" y1=\"-3.25\" x2=\"-1.5\" y2=\"-3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.5\" y1=\"-3.25\" x2=\"-1.5\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.5\" y1=\"2.5\" x2=\"-1.5\" y2=\"3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.5\" y1=\"2.5\" x2=\"4\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n</package>\n<package name=\"JST-2-PTH-VERT\">\n<wire x1=\"-2.95\" y1=\"-2.25\" x2=\"-2.95\" y2=\"2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.95\" y1=\"2.25\" x2=\"2.95\" y2=\"2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"2.25\" x2=\"2.95\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"-2.25\" x2=\"1\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-2.25\" x2=\"-2.95\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-1.75\" x2=\"1\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"-1.75\" x2=\"1\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-1.75\" x2=\"-1\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"-1\" y=\"-0.55\" drill=\"0.7\" diameter=\"1.6\"/>\n<pad name=\"2\" x=\"1\" y=\"-0.55\" drill=\"0.7\" diameter=\"1.6\"/>\n<text x=\"-1.984\" y=\"3\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"2.016\" y=\"3\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<text x=\"0.616\" y=\"0.75\" size=\"1.27\" layer=\"51\">+</text>\n<text x=\"-1.384\" y=\"0.75\" size=\"1.27\" layer=\"51\">-</text>\n</package>\n<package name=\"USB-C-16P\">\n<smd name=\"B6\" x=\"0.75\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"A7\" x=\"0.25\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"GND2\" x=\"3.225\" y=\"0\" dx=\"0.6\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"VBUS2\" x=\"2.45\" y=\"0\" dx=\"0.55\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"B5\" x=\"1.75\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"A8\" x=\"1.25\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\"/>\n<smd name=\"B7\" x=\"-0.75\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"A6\" x=\"-0.25\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"GND\" x=\"-3.225\" y=\"0\" dx=\"0.6\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"VBUS1\" x=\"-2.45\" y=\"0\" dx=\"0.55\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"B8\" x=\"-1.75\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"A5\" x=\"-1.25\" y=\"0\" dx=\"0.3\" dy=\"1.45\" layer=\"1\" rot=\"R180\"/>\n<hole x=\"-2.89\" y=\"-1.445\" drill=\"0.65\"/>\n<hole x=\"2.89\" y=\"-1.445\" drill=\"0.65\"/>\n<wire x1=\"-4.62\" y1=\"-5.4\" x2=\"-4.62\" y2=\"-4.78\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"-4.02\" y1=\"-5.4\" x2=\"-4.02\" y2=\"-4.78\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"-4.62\" y1=\"-4.78\" x2=\"-4.02\" y2=\"-4.78\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"-4.02\" y1=\"-5.4\" x2=\"-4.62\" y2=\"-5.4\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"-4.32\" y1=\"-4.295\" x2=\"-4.32\" y2=\"-5.895\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.82\" y1=\"-5.095\" x2=\"-3.82\" y2=\"-5.095\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.62\" y1=\"-5.095\" x2=\"-4.02\" y2=\"-5.095\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"-4.32\" y1=\"-4.495\" x2=\"-4.32\" y2=\"-5.695\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"-4.82\" y1=\"-5.395\" x2=\"-3.82\" y2=\"-5.395\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.82\" y1=\"-4.795\" x2=\"-3.82\" y2=\"-4.795\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.62\" y1=\"-1.465\" x2=\"-4.62\" y2=\"-0.365\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"-4.02\" y1=\"-1.465\" x2=\"-4.02\" y2=\"-0.365\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"-4.02\" y1=\"-1.465\" x2=\"-4.62\" y2=\"-1.465\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"-4.82\" y1=\"-0.915\" x2=\"-3.82\" y2=\"-0.915\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.62\" y1=\"-0.915\" x2=\"-4.02\" y2=\"-0.915\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"-4.82\" y1=\"-1.515\" x2=\"-3.82\" y2=\"-1.515\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.82\" y1=\"-0.315\" x2=\"-3.82\" y2=\"-0.315\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.62\" y1=\"-0.365\" x2=\"-4.02\" y2=\"-0.365\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"4.32\" y1=\"-0.065\" x2=\"4.32\" y2=\"-1.765\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"4.02\" y1=\"-5.4\" x2=\"4.02\" y2=\"-4.78\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"4.62\" y1=\"-5.4\" x2=\"4.62\" y2=\"-4.78\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"4.02\" y1=\"-4.78\" x2=\"4.62\" y2=\"-4.78\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"4.62\" y1=\"-5.4\" x2=\"4.02\" y2=\"-5.4\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"4.32\" y1=\"-4.295\" x2=\"4.32\" y2=\"-5.895\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"3.82\" y1=\"-5.095\" x2=\"4.82\" y2=\"-5.095\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"4.02\" y1=\"-5.095\" x2=\"4.62\" y2=\"-5.095\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"4.32\" y1=\"-4.495\" x2=\"4.32\" y2=\"-5.695\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"3.82\" y1=\"-5.395\" x2=\"4.82\" y2=\"-5.395\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"3.82\" y1=\"-4.795\" x2=\"4.82\" y2=\"-4.795\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"4.02\" y1=\"-1.465\" x2=\"4.02\" y2=\"-0.365\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"4.62\" y1=\"-1.465\" x2=\"4.62\" y2=\"-0.365\" width=\"0.01\" layer=\"46\"/>\n<wire x1=\"4.62\" y1=\"-1.465\" x2=\"4.02\" y2=\"-1.465\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"3.82\" y1=\"-0.915\" x2=\"4.82\" y2=\"-0.915\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"4.02\" y1=\"-0.915\" x2=\"4.62\" y2=\"-0.915\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"3.82\" y1=\"-1.515\" x2=\"4.82\" y2=\"-1.515\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"3.82\" y1=\"-0.315\" x2=\"4.82\" y2=\"-0.315\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"4.02\" y1=\"-0.365\" x2=\"4.62\" y2=\"-0.365\" width=\"0.01\" layer=\"46\" curve=\"-180\"/>\n<wire x1=\"-4.32\" y1=\"0.135\" x2=\"-4.32\" y2=\"0.125\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"0.125\" x2=\"-4.32\" y2=\"-1.965\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"-0.065\" x2=\"-4.32\" y2=\"-1.765\" width=\"0.01\" layer=\"52\"/>\n<wire x1=\"4.32\" y1=\"0.135\" x2=\"4.32\" y2=\"0.125\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"4.32\" y1=\"0.125\" x2=\"4.32\" y2=\"-1.965\" width=\"0.01\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"-7.695\" x2=\"4.32\" y2=\"-7.695\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"-7.695\" x2=\"-4.32\" y2=\"0.125\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"0.125\" x2=\"4.32\" y2=\"0.125\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"4.32\" y1=\"0.125\" x2=\"4.32\" y2=\"-7.695\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-4.32\" y1=\"-7.7\" x2=\"4.32\" y2=\"-7.7\" width=\"0.1524\" layer=\"51\" curve=\"-21.282614\"/>\n<wire x1=\"-4.32\" y1=\"-2.2\" x2=\"-4.32\" y2=\"-4\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"4.32\" y1=\"-2.2\" x2=\"4.32\" y2=\"-4\" width=\"0.1524\" layer=\"21\"/>\n<polygon width=\"0.01\" layer=\"29\">\n<vertex x=\"-4.92\" y=\"-1.52\"/>\n<vertex x=\"-4.92\" y=\"-0.32\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"0.235\" curve=\"-90\"/>\n<vertex x=\"-3.72\" y=\"-0.32\"/>\n<vertex x=\"-3.72\" y=\"-1.52\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-2.065\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"31\">\n<vertex x=\"-4.92\" y=\"-1.52\"/>\n<vertex x=\"-4.92\" y=\"-0.32\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"0.235\" curve=\"-90\"/>\n<vertex x=\"-3.72\" y=\"-0.32\"/>\n<vertex x=\"-3.72\" y=\"-1.52\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-2.065\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"29\">\n<vertex x=\"3.72\" y=\"-1.52\"/>\n<vertex x=\"3.72\" y=\"-0.32\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"0.235\" curve=\"-90\"/>\n<vertex x=\"4.92\" y=\"-0.32\"/>\n<vertex x=\"4.92\" y=\"-1.52\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-2.065\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"29\">\n<vertex x=\"3.72\" y=\"-5.4\"/>\n<vertex x=\"3.72\" y=\"-4.8\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-4.195\" curve=\"-90\"/>\n<vertex x=\"4.92\" y=\"-4.8\"/>\n<vertex x=\"4.92\" y=\"-5.4\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-5.995\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"29\">\n<vertex x=\"-4.92\" y=\"-5.4\"/>\n<vertex x=\"-4.92\" y=\"-4.8\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-4.195\" curve=\"-90\"/>\n<vertex x=\"-3.72\" y=\"-4.8\"/>\n<vertex x=\"-3.72\" y=\"-5.4\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-5.995\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"31\">\n<vertex x=\"3.72\" y=\"-1.52\"/>\n<vertex x=\"3.72\" y=\"-0.32\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"0.235\" curve=\"-90\"/>\n<vertex x=\"4.92\" y=\"-0.32\"/>\n<vertex x=\"4.92\" y=\"-1.52\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-2.065\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"31\">\n<vertex x=\"3.72\" y=\"-5.4\"/>\n<vertex x=\"3.72\" y=\"-4.8\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-4.195\" curve=\"-90\"/>\n<vertex x=\"4.92\" y=\"-4.8\"/>\n<vertex x=\"4.92\" y=\"-5.4\" curve=\"-90\"/>\n<vertex x=\"4.32\" y=\"-5.995\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.01\" layer=\"31\">\n<vertex x=\"-4.92\" y=\"-5.4\"/>\n<vertex x=\"-4.92\" y=\"-4.8\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-4.195\" curve=\"-90\"/>\n<vertex x=\"-3.72\" y=\"-4.8\"/>\n<vertex x=\"-3.72\" y=\"-5.4\" curve=\"-90\"/>\n<vertex x=\"-4.32\" y=\"-5.995\" curve=\"-90\"/>\n</polygon>\n<text x=\"0\" y=\"-2.54\" size=\"0.762\" layer=\"25\" align=\"center\">&gt;Name</text>\n<text x=\"0\" y=\"-3.81\" size=\"0.762\" layer=\"27\" align=\"center\">&gt;Value</text>\n<smd name=\"SHLD1\" x=\"-4.32\" y=\"-0.915\" dx=\"1\" dy=\"2.1\" layer=\"1\" roundness=\"100\" rot=\"R180\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD2\" x=\"4.32\" y=\"-0.915\" dx=\"1\" dy=\"2.1\" layer=\"1\" roundness=\"100\" rot=\"R180\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD3\" x=\"-4.32\" y=\"-0.915\" dx=\"1\" dy=\"2.1\" layer=\"16\" roundness=\"100\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD4\" x=\"4.32\" y=\"-0.915\" dx=\"1\" dy=\"2.1\" layer=\"16\" roundness=\"100\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD5\" x=\"-4.32\" y=\"-5.095\" dx=\"1\" dy=\"1.6\" layer=\"1\" roundness=\"100\" rot=\"R180\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD6\" x=\"-4.32\" y=\"-5.095\" dx=\"1\" dy=\"1.6\" layer=\"16\" roundness=\"100\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD7\" x=\"4.32\" y=\"-5.095\" dx=\"1\" dy=\"1.6\" layer=\"16\" roundness=\"100\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHLD8\" x=\"4.32\" y=\"-5.095\" dx=\"1\" dy=\"1.6\" layer=\"1\" roundness=\"100\" rot=\"R180\" stop=\"no\" cream=\"no\"/>\n<polygon width=\"0.0254\" layer=\"2\" pour=\"cutout\">\n<vertex x=\"-4.8\" y=\"0.1\"/>\n<vertex x=\"-3.8\" y=\"0.1\"/>\n<vertex x=\"-3.8\" y=\"-2\"/>\n<vertex x=\"-4.8\" y=\"-2\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"2\" pour=\"cutout\">\n<vertex x=\"-4.8\" y=\"-4.3\"/>\n<vertex x=\"-3.8\" y=\"-4.3\"/>\n<vertex x=\"-3.8\" y=\"-5.9\"/>\n<vertex x=\"-4.8\" y=\"-5.9\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"2\" pour=\"cutout\">\n<vertex x=\"3.8\" y=\"0.1\"/>\n<vertex x=\"4.8\" y=\"0.1\"/>\n<vertex x=\"4.8\" y=\"-1.9\"/>\n<vertex x=\"4.8\" y=\"-2\"/>\n<vertex x=\"3.8\" y=\"-2\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"2\" pour=\"cutout\">\n<vertex x=\"3.8\" y=\"-4.3\"/>\n<vertex x=\"4.8\" y=\"-4.3\"/>\n<vertex x=\"4.8\" y=\"-5.9\"/>\n<vertex x=\"3.8\" y=\"-5.9\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"15\" pour=\"cutout\">\n<vertex x=\"-4.8\" y=\"0.1\"/>\n<vertex x=\"-3.8\" y=\"0.1\"/>\n<vertex x=\"-3.8\" y=\"-2\"/>\n<vertex x=\"-4.8\" y=\"-2\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"15\" pour=\"cutout\">\n<vertex x=\"-4.8\" y=\"-4.3\"/>\n<vertex x=\"-3.8\" y=\"-4.3\"/>\n<vertex x=\"-3.8\" y=\"-5.9\"/>\n<vertex x=\"-4.8\" y=\"-5.9\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"15\" pour=\"cutout\">\n<vertex x=\"3.8\" y=\"0.1\"/>\n<vertex x=\"4.8\" y=\"0.1\"/>\n<vertex x=\"4.8\" y=\"-2\"/>\n<vertex x=\"3.8\" y=\"-2\"/>\n</polygon>\n<polygon width=\"0.0254\" layer=\"15\" pour=\"cutout\">\n<vertex x=\"3.8\" y=\"-4.3\"/>\n<vertex x=\"4.8\" y=\"-4.3\"/>\n<vertex x=\"4.8\" y=\"-5.9\"/>\n<vertex x=\"3.8\" y=\"-5.9\"/>\n</polygon>\n</package>\n</packages>\n<symbols>\n<symbol name=\"M02\">\n<wire x1=\"3.81\" y1=\"-2.54\" x2=\"-2.54\" y2=\"-2.54\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"2.54\" x2=\"2.54\" y2=\"2.54\" width=\"0.6096\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"0\" x2=\"2.54\" y2=\"0\" width=\"0.6096\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"5.08\" x2=\"-2.54\" y2=\"-2.54\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"3.81\" y1=\"-2.54\" x2=\"3.81\" y2=\"5.08\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"5.08\" x2=\"3.81\" y2=\"5.08\" width=\"0.4064\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"-5.08\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<text x=\"-2.54\" y=\"5.842\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<pin name=\"1\" x=\"7.62\" y=\"0\" visible=\"pad\" length=\"middle\" direction=\"pas\" swaplevel=\"1\" rot=\"R180\"/>\n<pin name=\"2\" x=\"7.62\" y=\"2.54\" visible=\"pad\" length=\"middle\" direction=\"pas\" swaplevel=\"1\" rot=\"R180\"/>\n</symbol>\n<symbol name=\"USB-C-MINIMUM\">\n<description>&lt;h3&gt;USB - C 16 Pin&lt;/h3&gt;\nExposes the minimal pins needed to implement a USB 2.x legacy device.</description>\n<wire x1=\"-2.54\" y1=\"-10.16\" x2=\"10.16\" y2=\"-10.16\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"10.16\" y1=\"-10.16\" x2=\"10.16\" y2=\"10.16\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"10.16\" y1=\"10.16\" x2=\"-2.54\" y2=\"10.16\" width=\"0.254\" layer=\"94\"/>\n<text x=\"0\" y=\"0\" size=\"2.54\" layer=\"94\" rot=\"R270\" align=\"center\">USB-C</text>\n<text x=\"-2.54\" y=\"-12.446\" size=\"1.778\" layer=\"96\" font=\"vector\" rot=\"MR180\" align=\"top-left\">&gt;VALUE</text>\n<wire x1=\"-2.54\" y1=\"-10.16\" x2=\"-2.54\" y2=\"10.16\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"10.414\" size=\"1.778\" layer=\"95\" font=\"vector\">&gt;NAME</text>\n<pin name=\"GND\" x=\"12.7\" y=\"-7.62\" length=\"short\" rot=\"R180\"/>\n<pin name=\"VBUS\" x=\"12.7\" y=\"7.62\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CC1\" x=\"12.7\" y=\"0\" length=\"short\" rot=\"R180\"/>\n<pin name=\"D+\" x=\"12.7\" y=\"5.08\" length=\"short\" rot=\"R180\"/>\n<pin name=\"D-\" x=\"12.7\" y=\"2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CC2\" x=\"12.7\" y=\"-2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"SHLD\" x=\"12.7\" y=\"-5.08\" length=\"short\" rot=\"R180\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"M02\" prefix=\"J\" uservalue=\"yes\">\n<description>Standard 2-pin 0.1\" header. Use with &lt;br&gt;\n- straight break away headers ( PRT-00116)&lt;br&gt;\n- right angle break away headers (PRT-00553)&lt;br&gt;\n- swiss pins (PRT-00743)&lt;br&gt;\n- machine pins (PRT-00117)&lt;br&gt;\n- female headers (PRT-00115)&lt;br&gt;&lt;br&gt;\n\n Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.&lt;br&gt;&lt;br&gt;\n\n2.54_SCREWTERM for use with  PRT-10571.&lt;br&gt;&lt;br&gt;\n\n3.5mm Screw Terminal footprints for  PRT-08084&lt;br&gt;&lt;br&gt;\n\n5mm Screw Terminal footprints for use with PRT-08432</description>\n<gates>\n<gate name=\"G$1\" symbol=\"M02\" x=\"-2.54\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"PTH\" package=\"1X02\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"POLAR\" package=\"MOLEX-1X2\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"3.5MM\" package=\"SCREWTERMINAL-3.5MM-2\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-08399\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-JST-2MM-SMT\" package=\"JST-2-SMD\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"1\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-11443\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"PTH2\" package=\"1X02_BIG\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"4UCON-15767\" package=\"JST-2-SMD-VERT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"GND\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"VCC\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"ROCKER\" package=\"R_SW_TH\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$3\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$4\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"5MM\" package=\"SCREWTERMINAL-5MM-2\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"STOREFRONT_ID\" value=\"PRT-08432\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"LOCK\" package=\"1X02_LOCK\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"POLAR_LOCK\" package=\"MOLEX-1X2_LOCK\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"LOCK_LONGPADS\" package=\"1X02_LOCK_LONGPADS\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"3.5MM_LOCK\" package=\"SCREWTERMINAL-3.5MM-2_LOCK\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-08399\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"PTH3\" package=\"1X02_LONGPADS\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"1X02_NO_SILK\" package=\"1X02_NO_SILK\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"JST-PTH-2\" package=\"JST-2-PTH\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-09863\" constant=\"no\"/>\n<attribute name=\"SKU\" value=\"PRT-09914\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"PTH4\" package=\"1X02_XTRA_BIG\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"POGO_PIN_HOLES_ONLY\" package=\"1X02_PP_HOLES_ONLY\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"3.5MM-NO_SILK\" package=\"SCREWTERMINAL-3.5MM-2-NS\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-08399\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-JST-2-PTH-NO_SILK\" package=\"JST-2-PTH-NS\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"JST-PTH-2-KIT\" package=\"JST-2-PTH-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"SPRING-2.54-RA\" package=\"SPRINGTERMINAL-2.54MM-2\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"2.54MM_SCREWTERM\" package=\"1X02_2.54_SCREWTERM\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"JST-PTH-VERT\" package=\"JST-2-PTH-VERT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"USB_C\" prefix=\"J\" uservalue=\"yes\">\n<description>&lt;h3&gt;USB Type C 16Pin Connector&lt;/h3&gt;\n\nSuper Speed pins not available on the 16-pin purely SMD connector so this part is best for USB 2.0 implementations. D1 and D2 are tied together enabling D+/- no matter which way the cable is plugged into the connector. The two channel configuration pins (CC1/2) are exposed. These are normally connected to ground via 5.1k resistors but can be reconfigured for high current/high power applications.</description>\n<gates>\n<gate name=\"J1\" symbol=\"USB-C-MINIMUM\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"16PIN\" package=\"USB-C-16P\">\n<connects>\n<connect gate=\"J1\" pin=\"CC1\" pad=\"A5\"/>\n<connect gate=\"J1\" pin=\"CC2\" pad=\"B5\"/>\n<connect gate=\"J1\" pin=\"D+\" pad=\"A6 B6\" route=\"any\"/>\n<connect gate=\"J1\" pin=\"D-\" pad=\"A7 B7\"/>\n<connect gate=\"J1\" pin=\"GND\" pad=\"GND GND2\"/>\n<connect gate=\"J1\" pin=\"SHLD\" pad=\"SHLD1 SHLD2 SHLD3 SHLD4 SHLD5 SHLD6 SHLD7 SHLD8\" route=\"any\"/>\n<connect gate=\"J1\" pin=\"VBUS\" pad=\"VBUS1 VBUS2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-14122\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-PowerIC\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find drivers, regulators, and amplifiers.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SOT23-5\">\n<description>&lt;b&gt;Small Outline Transistor&lt;/b&gt;</description>\n<wire x1=\"1.27\" y1=\"0.4294\" x2=\"1.27\" y2=\"-0.4294\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"-0.8\" x2=\"-1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.27\" y1=\"-0.4294\" x2=\"-1.27\" y2=\"0.4294\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.4\" y1=\"0.8\" x2=\"1.4\" y2=\"0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.2684\" y1=\"0.7088\" x2=\"0.2684\" y2=\"0.7088\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"0.8\" x2=\"1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"0.8\" x2=\"-1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<rectangle x1=\"-1.2\" y1=\"-1.5\" x2=\"-0.7\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"-0.25\" y1=\"-1.5\" x2=\"0.25\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"0.7\" y1=\"-1.5\" x2=\"1.2\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"0.7\" y1=\"0.85\" x2=\"1.2\" y2=\"1.5\" layer=\"51\"/>\n<rectangle x1=\"-1.2\" y1=\"0.85\" x2=\"-0.7\" y2=\"1.5\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.95\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"0\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"3\" x=\"0.95\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"4\" x=\"0.95\" y=\"1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"5\" x=\"-0.95\" y=\"1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"2.159\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-0.9525\" y=\"-0.1905\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<circle x=\"-1.6002\" y=\"-1.016\" radius=\"0.127\" width=\"0\" layer=\"21\"/>\n</package>\n<package name=\"PTC\">\n<wire x1=\"-3.81\" y1=\"1.524\" x2=\"3.81\" y2=\"1.524\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"1.524\" x2=\"3.81\" y2=\"-1.524\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-1.524\" x2=\"-3.81\" y2=\"-1.524\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.81\" y1=\"-1.524\" x2=\"-3.81\" y2=\"1.524\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-2.54\" y=\"0\" drill=\"0.8\" diameter=\"1.8796\"/>\n<pad name=\"P$2\" x=\"2.54\" y=\"0\" drill=\"0.8\" diameter=\"1.8796\"/>\n<text x=\"-3.81\" y=\"1.705\" size=\"0.4318\" layer=\"25\">&gt;Name</text>\n<text x=\"-3.81\" y=\"-2.14\" size=\"0.4318\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"PTC-1206\">\n<wire x1=\"-1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.635\" y1=\"-0.762\" x2=\"-0.635\" y2=\"-0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.635\" y1=\"0.762\" x2=\"0.635\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.143\" y1=\"-1.016\" x2=\"0.254\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.254\" y1=\"1.016\" x2=\"1.143\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.4\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<smd name=\"2\" x=\"1.4\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<text x=\"-1.524\" y=\"1.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.524\" y=\"-1.651\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"0603\">\n<wire x1=\"-1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"0.762\" size=\"0.4064\" layer=\"25\" font=\"vector\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-1.143\" size=\"0.4064\" layer=\"27\" font=\"vector\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n<package name=\"PTC-1206-WIDE\">\n<wire x1=\"-1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.635\" y1=\"-0.762\" x2=\"-0.635\" y2=\"-0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.635\" y1=\"0.762\" x2=\"0.635\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.143\" y1=\"-1.016\" x2=\"0.254\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.254\" y1=\"1.016\" x2=\"1.143\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.654\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<smd name=\"2\" x=\"1.654\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<text x=\"-1.524\" y=\"1.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.524\" y=\"-1.651\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"SC70\">\n<wire x1=\"1\" y1=\"0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"-1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"0.625\" x2=\"1\" y2=\"0.625\" width=\"0.127\" layer=\"21\"/>\n<smd name=\"1\" x=\"-0.65\" y=\"-0.825\" dx=\"0.4\" dy=\"0.75\" layer=\"1\" cream=\"no\"/>\n<smd name=\"2\" x=\"0\" y=\"-0.825\" dx=\"0.4\" dy=\"0.75\" layer=\"1\" cream=\"no\"/>\n<smd name=\"3\" x=\"0.65\" y=\"-0.825\" dx=\"0.4\" dy=\"0.75\" layer=\"1\" cream=\"no\"/>\n<smd name=\"4\" x=\"0.65\" y=\"0.825\" dx=\"0.4\" dy=\"0.75\" layer=\"1\" cream=\"no\"/>\n<smd name=\"5\" x=\"-0.65\" y=\"0.825\" dx=\"0.4\" dy=\"0.75\" layer=\"1\" cream=\"no\"/>\n<text x=\"-0.889\" y=\"1.524\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-0.762\" y=\"-0.254\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<rectangle x1=\"-0.85\" y1=\"0.45\" x2=\"-0.45\" y2=\"1.2\" layer=\"31\"/>\n<rectangle x1=\"0.45\" y1=\"0.45\" x2=\"0.85\" y2=\"1.2\" layer=\"31\"/>\n<rectangle x1=\"-0.8382\" y1=\"-1.1684\" x2=\"-0.508\" y2=\"-0.4826\" layer=\"31\"/>\n<rectangle x1=\"-0.1651\" y1=\"-1.1684\" x2=\"0.1651\" y2=\"-0.4826\" layer=\"31\"/>\n<rectangle x1=\"0.508\" y1=\"-1.1684\" x2=\"0.8382\" y2=\"-0.4826\" layer=\"31\"/>\n<wire x1=\"-1\" y1=\"0.625\" x2=\"1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1\" y1=\"0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"-1\" y2=\"0.625\" width=\"0.127\" layer=\"21\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"MCP73831\">\n<wire x1=\"-7.62\" y1=\"5.08\" x2=\"7.62\" y2=\"5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"7.62\" y1=\"5.08\" x2=\"7.62\" y2=\"-5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"7.62\" y1=\"-5.08\" x2=\"-7.62\" y2=\"-5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-7.62\" y1=\"-5.08\" x2=\"-7.62\" y2=\"5.08\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-7.62\" y=\"5.588\" size=\"1.778\" layer=\"95\">&gt;Name</text>\n<text x=\"-7.62\" y=\"-7.62\" size=\"1.778\" layer=\"96\">&gt;Value</text>\n<pin name=\"VIN\" x=\"-10.16\" y=\"2.54\" length=\"short\" direction=\"pwr\"/>\n<pin name=\"STAT\" x=\"-10.16\" y=\"-2.54\" length=\"short\" direction=\"out\"/>\n<pin name=\"VBAT\" x=\"10.16\" y=\"2.54\" length=\"short\" direction=\"pwr\" rot=\"R180\"/>\n<pin name=\"PROG\" x=\"10.16\" y=\"0\" length=\"short\" direction=\"in\" rot=\"R180\"/>\n<pin name=\"VSS\" x=\"10.16\" y=\"-2.54\" length=\"short\" direction=\"pwr\" rot=\"R180\"/>\n</symbol>\n<symbol name=\"PTC\">\n<wire x1=\"5.08\" y1=\"1.27\" x2=\"5.08\" y2=\"-1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"5.08\" y1=\"-1.27\" x2=\"-2.54\" y2=\"-1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"-1.27\" x2=\"-2.54\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"1.27\" x2=\"5.08\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-1.524\" y1=\"-2.54\" x2=\"3.81\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"3.81\" y1=\"2.54\" x2=\"5.08\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"3.048\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"-3.302\" y=\"-5.08\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"1\" x=\"-5.08\" y=\"0\" visible=\"off\" length=\"short\"/>\n<pin name=\"2\" x=\"7.62\" y=\"0\" visible=\"off\" length=\"short\" rot=\"R180\"/>\n</symbol>\n<symbol name=\"V-REG-LDO\">\n<wire x1=\"-7.62\" y1=\"-7.62\" x2=\"5.08\" y2=\"-7.62\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"5.08\" y1=\"-7.62\" x2=\"5.08\" y2=\"7.62\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"5.08\" y1=\"7.62\" x2=\"-7.62\" y2=\"7.62\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-7.62\" y1=\"7.62\" x2=\"-7.62\" y2=\"-7.62\" width=\"0.4064\" layer=\"94\"/>\n<text x=\"-7.62\" y=\"9.144\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"-7.62\" y=\"-11.43\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"IN\" x=\"-10.16\" y=\"5.08\" visible=\"pin\" length=\"short\" direction=\"in\"/>\n<pin name=\"GND\" x=\"-10.16\" y=\"-5.08\" visible=\"pin\" length=\"short\" direction=\"in\"/>\n<pin name=\"OUT\" x=\"7.62\" y=\"5.08\" visible=\"pin\" length=\"short\" direction=\"pas\" rot=\"R180\"/>\n<pin name=\"EN\" x=\"-10.16\" y=\"0\" visible=\"pin\" length=\"short\" direction=\"in\"/>\n<pin name=\"BP\" x=\"7.62\" y=\"-5.08\" visible=\"pin\" length=\"short\" direction=\"in\" rot=\"R180\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"MCP73831\" prefix=\"U\">\n<description>&lt;b&gt;Miniature single cell, fully integrated Li-Ion, Li-polymer charge management controller&lt;/b&gt;&lt;br&gt;\nhttp://ww1.microchip.com/downloads/en/DeviceDoc/20001984g.pdf&lt;br&gt;\nIC-09995</description>\n<gates>\n<gate name=\"G$1\" symbol=\"MCP73831\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"SOT23-5\">\n<connects>\n<connect gate=\"G$1\" pin=\"PROG\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"STAT\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"VBAT\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"VIN\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"VSS\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"IC-09995\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"PTC\" prefix=\"F\">\n<description>&lt;b&gt;Resettable Fuse PTC&lt;/b&gt;\nResettable Fuse. Spark Fun Electronics SKU : COM-08357</description>\n<gates>\n<gate name=\"G$1\" symbol=\"PTC\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"PTH\" package=\"PTC\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"SMD\" package=\"PTC-1206\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-11150\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"0603\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"SMD-W\" package=\"PTC-1206-WIDE\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"THERMISTOR1206\" package=\"PTC-1206\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08585\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"V_REG_LDO\" prefix=\"U\">\n<description>&lt;b&gt;Voltage Regulator LDO&lt;/b&gt;\nStandard 150mA LDO voltage regulator in SOT-23 layout. Micrel part MIC5205. BP (by-pass) pin is used to lower output noise with 470pF cap.</description>\n<gates>\n<gate name=\"G$1\" symbol=\"V-REG-LDO\" x=\"2.54\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"SMD\" package=\"SOT23-5\">\n<connects>\n<connect gate=\"G$1\" pin=\"BP\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"EN\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"IN\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"OUT\" pad=\"5\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"SMD2\" package=\"SC70\">\n<connects>\n<connect gate=\"G$1\" pin=\"BP\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"EN\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"IN\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"OUT\" pad=\"5\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"VREG-08428\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun\">\n<packages>\n</packages>\n<symbols>\n<symbol name=\"GND\">\n<wire x1=\"-1.905\" y1=\"0\" x2=\"1.905\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"-2.54\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"GND\" x=\"0\" y=\"2.54\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R270\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"GND\" prefix=\"GND\">\n<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>\n<gates>\n<gate name=\"1\" symbol=\"GND\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-DigitalIC\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find all manner of digital ICs- microcontrollers, memory chips, logic chips, FPGAs, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SSOP20_L\">\n<description>Longer version of SSOP-20 Package</description>\n<wire x1=\"4.3307\" y1=\"-1.9558\" x2=\"4.3307\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"-3.81\" y=\"-2.54\" radius=\"0.254\" width=\"0\" layer=\"21\"/>\n<text x=\"0\" y=\"0\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<smd name=\"16\" x=\"-0.3175\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"15\" x=\"0.3175\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"14\" x=\"0.9525\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"13\" x=\"1.5875\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"12\" x=\"2.2225\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"11\" x=\"2.8575\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"17\" x=\"-0.9525\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"18\" x=\"-1.5875\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"19\" x=\"-2.2225\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"20\" x=\"-2.8575\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"6\" x=\"0.3175\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"5\" x=\"-0.3175\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"4\" x=\"-0.9525\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"-1.5875\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"-2.2225\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"1\" x=\"-2.8575\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"7\" x=\"0.9525\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"8\" x=\"1.5875\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"9\" x=\"2.2225\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"10\" x=\"2.8575\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<rectangle x1=\"0.1905\" y1=\"-2.9845\" x2=\"0.4445\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"0.8255\" y1=\"-2.9845\" x2=\"1.0795\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"1.4605\" y1=\"-2.9845\" x2=\"1.7145\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"2.0955\" y1=\"-2.9845\" x2=\"2.3495\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"2.7305\" y1=\"-2.9845\" x2=\"2.9845\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-0.4445\" y1=\"-2.9845\" x2=\"-0.1905\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-1.0795\" y1=\"-2.9845\" x2=\"-0.8255\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-1.7145\" y1=\"-2.9845\" x2=\"-1.4605\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-2.3495\" y1=\"-2.9845\" x2=\"-2.0955\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-2.9845\" y1=\"-2.9845\" x2=\"-2.7305\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-0.4445\" y1=\"2.3495\" x2=\"-0.1905\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-1.0795\" y1=\"2.3495\" x2=\"-0.8255\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-1.7145\" y1=\"2.3495\" x2=\"-1.4605\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-2.3495\" y1=\"2.3495\" x2=\"-2.0955\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-2.9845\" y1=\"2.3495\" x2=\"-2.7305\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"0.1905\" y1=\"2.3495\" x2=\"0.4445\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"0.8255\" y1=\"2.3495\" x2=\"1.0795\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"1.4605\" y1=\"2.3495\" x2=\"1.7145\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"2.0955\" y1=\"2.3495\" x2=\"2.3495\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"2.7305\" y1=\"2.3495\" x2=\"2.9845\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<wire x1=\"-4.3307\" y1=\"1.9558\" x2=\"-4.3307\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.3307\" y1=\"-1.9558\" x2=\"-3.2512\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2512\" y1=\"-1.9558\" x2=\"4.3307\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.3307\" y1=\"1.9558\" x2=\"-3.2512\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2512\" y1=\"1.9558\" x2=\"4.3307\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"FT231X\">\n<pin name=\"VCC\" x=\"-12.7\" y=\"15.24\" length=\"short\"/>\n<pin name=\"VCCIO\" x=\"-12.7\" y=\"12.7\" length=\"short\"/>\n<pin name=\"3V3OUT\" x=\"-12.7\" y=\"10.16\" length=\"short\"/>\n<pin name=\"USBDM\" x=\"-12.7\" y=\"5.08\" length=\"short\"/>\n<pin name=\"USBDP\" x=\"-12.7\" y=\"2.54\" length=\"short\"/>\n<pin name=\"!RESET\" x=\"-12.7\" y=\"-2.54\" length=\"short\"/>\n<pin name=\"GND@6\" x=\"-12.7\" y=\"-12.7\" length=\"short\"/>\n<pin name=\"GND@16\" x=\"-12.7\" y=\"-15.24\" length=\"short\"/>\n<pin name=\"TXD\" x=\"12.7\" y=\"15.24\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CBUS3\" x=\"12.7\" y=\"-15.24\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CBUS2\" x=\"12.7\" y=\"-12.7\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CBUS1\" x=\"12.7\" y=\"-10.16\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CBUS0\" x=\"12.7\" y=\"-7.62\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!RI\" x=\"12.7\" y=\"-5.08\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!DCD\" x=\"12.7\" y=\"-2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!DSR\" x=\"12.7\" y=\"0\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!DTR\" x=\"12.7\" y=\"2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!CTS\" x=\"12.7\" y=\"5.08\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!RTS\" x=\"12.7\" y=\"7.62\" length=\"short\" rot=\"R180\"/>\n<pin name=\"RXD\" x=\"12.7\" y=\"12.7\" length=\"short\" rot=\"R180\"/>\n<wire x1=\"-10.16\" y1=\"17.78\" x2=\"-10.16\" y2=\"-17.78\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-10.16\" y1=\"-17.78\" x2=\"10.16\" y2=\"-17.78\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"10.16\" y1=\"-17.78\" x2=\"10.16\" y2=\"17.78\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"10.16\" y1=\"17.78\" x2=\"-10.16\" y2=\"17.78\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-10.16\" y=\"18.034\" size=\"1.778\" layer=\"95\">&gt;Name</text>\n<text x=\"-10.16\" y=\"-18.288\" size=\"1.778\" layer=\"96\" align=\"top-left\">&gt;Value</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"FT231X\" prefix=\"U\">\n<description>&lt;h3&gt;FTDI FT231X Full Speed USB to Full-handshake UART&lt;/h3&gt;\nThis USB2.0 Full Speed  IC offers a compact bridge to full handshake UART interfaces. The device is a UART, capable of operating up to 3MBaud, with low power consumption (8mA). The FT231X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.&lt;br&gt;&lt;br&gt;</description>\n<gates>\n<gate name=\"U$1\" symbol=\"FT231X\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"S\" package=\"SSOP20_L\">\n<connects>\n<connect gate=\"U$1\" pin=\"!CTS\" pad=\"9\"/>\n<connect gate=\"U$1\" pin=\"!DCD\" pad=\"8\"/>\n<connect gate=\"U$1\" pin=\"!DSR\" pad=\"7\"/>\n<connect gate=\"U$1\" pin=\"!DTR\" pad=\"1\"/>\n<connect gate=\"U$1\" pin=\"!RESET\" pad=\"14\"/>\n<connect gate=\"U$1\" pin=\"!RI\" pad=\"5\"/>\n<connect gate=\"U$1\" pin=\"!RTS\" pad=\"2\"/>\n<connect gate=\"U$1\" pin=\"3V3OUT\" pad=\"13\"/>\n<connect gate=\"U$1\" pin=\"CBUS0\" pad=\"18\"/>\n<connect gate=\"U$1\" pin=\"CBUS1\" pad=\"17\"/>\n<connect gate=\"U$1\" pin=\"CBUS2\" pad=\"10\"/>\n<connect gate=\"U$1\" pin=\"CBUS3\" pad=\"19\"/>\n<connect gate=\"U$1\" pin=\"GND@16\" pad=\"16\"/>\n<connect gate=\"U$1\" pin=\"GND@6\" pad=\"6\"/>\n<connect gate=\"U$1\" pin=\"RXD\" pad=\"4\"/>\n<connect gate=\"U$1\" pin=\"TXD\" pad=\"20\"/>\n<connect gate=\"U$1\" pin=\"USBDM\" pad=\"12\"/>\n<connect gate=\"U$1\" pin=\"USBDP\" pad=\"11\"/>\n<connect gate=\"U$1\" pin=\"VCC\" pad=\"15\"/>\n<connect gate=\"U$1\" pin=\"VCCIO\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"IC-11524\"/>\n<attribute name=\"VALUE\" value=\"FT231XS\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-DiscreteSemi\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SOD-323\">\n<wire x1=\"-0.9\" y1=\"0.65\" x2=\"-0.5\" y2=\"0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"0.65\" x2=\"0.9\" y2=\"0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.9\" y1=\"-0.65\" x2=\"-0.5\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"-0.65\" x2=\"0.9\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"0.65\" x2=\"-0.5\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"C\" x=\"-1.15\" y=\"0\" dx=\"0.63\" dy=\"0.83\" layer=\"1\"/>\n<smd name=\"A\" x=\"1.15\" y=\"0\" dx=\"0.63\" dy=\"0.83\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"1.016\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-1.397\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"SOD-523\">\n<smd name=\"C\" x=\"0.7\" y=\"0\" dx=\"0.4\" dy=\"0.4\" layer=\"1\"/>\n<smd name=\"A\" x=\"-0.7\" y=\"0\" dx=\"0.4\" dy=\"0.4\" layer=\"1\"/>\n<wire x1=\"-0.6\" y1=\"-0.4\" x2=\"0.4\" y2=\"-0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.4\" y1=\"-0.4\" x2=\"0.6\" y2=\"-0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.6\" y1=\"0.4\" x2=\"0.4\" y2=\"0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.4\" y1=\"0.4\" x2=\"-0.6\" y2=\"0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.6\" y1=\"0.4\" x2=\"0.4\" y2=\"0.6\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.6\" y1=\"-0.4\" x2=\"0.4\" y2=\"-0.6\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.4\" y1=\"-0.6\" x2=\"0.4\" y2=\"-0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.4\" y1=\"0.6\" x2=\"0.4\" y2=\"0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-0.6\" y1=\"-0.4\" x2=\"0.3\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.3\" y1=\"-0.4\" x2=\"0.6\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.6\" y1=\"-0.4\" x2=\"0.6\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.6\" y1=\"-0.1\" x2=\"0.6\" y2=\"0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.6\" y1=\"0.1\" x2=\"0.6\" y2=\"0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.6\" y1=\"0.4\" x2=\"0.3\" y2=\"0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.3\" y1=\"0.4\" x2=\"-0.6\" y2=\"0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.6\" y1=\"0.4\" x2=\"-0.6\" y2=\"0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.6\" y1=\"0.1\" x2=\"-0.6\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.6\" y1=\"-0.1\" x2=\"-0.6\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.6\" y1=\"0.1\" x2=\"0.8\" y2=\"0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.8\" y1=\"0.1\" x2=\"0.8\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.8\" y1=\"-0.1\" x2=\"0.6\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.6\" y1=\"-0.1\" x2=\"-0.8\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.6\" y1=\"0.1\" x2=\"-0.8\" y2=\"0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.8\" y1=\"0.1\" x2=\"-0.8\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.3\" y1=\"0.4\" x2=\"0.3\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n</package>\n<package name=\"SMA-DIODE\">\n<description>&lt;B&gt;Diode&lt;/B&gt;&lt;p&gt;\nBasic SMA packaged diode. Good for reverse polarization protection. Common part #: MBRA140</description>\n<wire x1=\"-2.3\" y1=\"1\" x2=\"-2.3\" y2=\"1.45\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.3\" y1=\"1.45\" x2=\"2.3\" y2=\"1.45\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.3\" y1=\"1.45\" x2=\"2.3\" y2=\"1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.3\" y1=\"-1\" x2=\"2.3\" y2=\"-1.45\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.3\" y1=\"-1.45\" x2=\"-2.3\" y2=\"-1.45\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.3\" y1=\"-1.45\" x2=\"-2.3\" y2=\"-1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"1\" x2=\"1\" y2=\"-1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"A\" x=\"-2.15\" y=\"0\" dx=\"1.27\" dy=\"1.47\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"C\" x=\"2.15\" y=\"0\" dx=\"1.27\" dy=\"1.47\" layer=\"1\"/>\n<text x=\"-2.286\" y=\"1.651\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"0.254\" y=\"1.651\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"SOT23-3\">\n<wire x1=\"1.4224\" y1=\"0.6604\" x2=\"1.4224\" y2=\"-0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.4224\" y1=\"-0.6604\" x2=\"-1.4224\" y2=\"-0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4224\" y1=\"-0.6604\" x2=\"-1.4224\" y2=\"0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4224\" y1=\"0.6604\" x2=\"1.4224\" y2=\"0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.8\" y1=\"0.7\" x2=\"-1.4\" y2=\"0.7\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.4\" y1=\"0.7\" x2=\"-1.4\" y2=\"-0.1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.8\" y1=\"0.7\" x2=\"1.4\" y2=\"0.7\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"0.7\" x2=\"1.4\" y2=\"-0.1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-0.95\" y=\"-1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.95\" y=\"-1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"3\" x=\"0\" y=\"1.1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<text x=\"-0.8255\" y=\"1.778\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-0.1905\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"TO220V\">\n<description>&lt;b&gt;TO 220 Vertical&lt;/b&gt; Package works with various parts including N-Channel MOSFET SparkFun SKU: COM-10213</description>\n<wire x1=\"-5.08\" y1=\"2.032\" x2=\"-5.08\" y2=\"-0.381\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"2.032\" x2=\"5.08\" y2=\"-0.381\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"2.032\" x2=\"-5.08\" y2=\"2.032\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-5.08\" y1=\"2.032\" x2=\"-5.08\" y2=\"3.048\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-5.08\" y1=\"3.048\" x2=\"5.08\" y2=\"3.048\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"3.048\" x2=\"5.08\" y2=\"2.032\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-5.08\" y1=\"-0.381\" x2=\"-4.191\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\" curve=\"92.798868\"/>\n<wire x1=\"4.191\" y1=\"-1.27\" x2=\"5.08\" y2=\"-0.381\" width=\"0.2032\" layer=\"21\" curve=\"92.798868\"/>\n<wire x1=\"-4.191\" y1=\"-1.27\" x2=\"-3.81\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4.191\" y1=\"-1.27\" x2=\"3.81\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<rectangle x1=\"-5.08\" y1=\"2.032\" x2=\"5.08\" y2=\"3.048\" layer=\"21\"/>\n<pad name=\"1\" x=\"-2.54\" y=\"0\" drill=\"1.016\" shape=\"long\" rot=\"R90\"/>\n<pad name=\"2\" x=\"0\" y=\"0\" drill=\"1.016\" shape=\"long\" rot=\"R90\"/>\n<pad name=\"3\" x=\"2.54\" y=\"0\" drill=\"1.016\" shape=\"long\" rot=\"R90\"/>\n<text x=\"-2.794\" y=\"3.429\" size=\"1.27\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-3.302\" y=\"-3.302\" size=\"1.27\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n</packages>\n<symbols>\n<symbol name=\"DIODE-SCHOTTKY\">\n<wire x1=\"-1.27\" y1=\"-1.27\" x2=\"1.27\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"0\" x2=\"-1.27\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"1.27\" x2=\"1.27\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-1.27\" y1=\"1.27\" x2=\"-1.27\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-1.27\" y1=\"0\" x2=\"-1.27\" y2=\"-1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"0\" x2=\"1.27\" y2=\"-1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"1.27\" x2=\"1.778\" y2=\"1.524\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"-1.27\" x2=\"0.762\" y2=\"-1.524\" width=\"0.254\" layer=\"94\"/>\n<text x=\"2.54\" y=\"0.4826\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"2.54\" y=\"-2.3114\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"A\" x=\"-2.54\" y=\"0\" visible=\"off\" length=\"point\" direction=\"pas\"/>\n<pin name=\"C\" x=\"2.54\" y=\"0\" visible=\"off\" length=\"point\" direction=\"pas\" rot=\"R180\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-1.27\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"1.27\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n</symbol>\n<symbol name=\"MOSFET-PCHANNEL\">\n<wire x1=\"-3.6576\" y1=\"2.413\" x2=\"-3.6576\" y2=\"-2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"1.905\" x2=\"-2.0066\" y2=\"1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"-1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-2.032\" y1=\"-1.905\" x2=\"0\" y2=\"-1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"0\" y2=\"1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"1.905\" x2=\"2.54\" y2=\"1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-1.905\" x2=\"0\" y2=\"-1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"-1.905\" x2=\"0\" y2=\"-2.54\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-1.905\" x2=\"2.54\" y2=\"-0.762\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-0.762\" x2=\"2.54\" y2=\"1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-0.762\" x2=\"3.175\" y2=\"0.635\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"3.175\" y1=\"0.635\" x2=\"1.905\" y2=\"0.635\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.905\" y1=\"0.635\" x2=\"2.54\" y2=\"-0.762\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"3.175\" y1=\"-0.762\" x2=\"2.54\" y2=\"-0.762\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-0.762\" x2=\"1.905\" y2=\"-0.762\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.905\" y1=\"-0.762\" x2=\"1.651\" y2=\"-1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"3.175\" y1=\"-0.762\" x2=\"3.429\" y2=\"-0.508\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"-1.27\" y2=\"0.508\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-1.27\" y1=\"0.508\" x2=\"-1.27\" y2=\"-0.508\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-1.27\" y1=\"-0.508\" x2=\"0\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-1.143\" y1=\"0\" x2=\"-2.032\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-1.143\" y1=\"-0.254\" x2=\"-0.254\" y2=\"0\" width=\"0.3048\" layer=\"94\"/>\n<wire x1=\"-0.254\" y1=\"0\" x2=\"-1.143\" y2=\"0.254\" width=\"0.3048\" layer=\"94\"/>\n<wire x1=\"-1.143\" y1=\"0.254\" x2=\"-1.143\" y2=\"0\" width=\"0.3048\" layer=\"94\"/>\n<wire x1=\"-1.143\" y1=\"0\" x2=\"-0.889\" y2=\"0\" width=\"0.3048\" layer=\"94\"/>\n<wire x1=\"-3.81\" y1=\"0\" x2=\"-5.08\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<circle x=\"0\" y=\"-1.905\" radius=\"0.127\" width=\"0.4064\" layer=\"94\"/>\n<circle x=\"0\" y=\"1.905\" radius=\"0.127\" width=\"0.4064\" layer=\"94\"/>\n<text x=\"5.08\" y=\"2.54\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"5.08\" y=\"0\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<text x=\"-1.27\" y=\"2.54\" size=\"0.8128\" layer=\"93\">D</text>\n<text x=\"-1.27\" y=\"-3.556\" size=\"0.8128\" layer=\"93\">S</text>\n<text x=\"-5.08\" y=\"-1.27\" size=\"0.8128\" layer=\"93\">G</text>\n<rectangle x1=\"-2.794\" y1=\"-2.54\" x2=\"-2.032\" y2=\"-1.27\" layer=\"94\"/>\n<rectangle x1=\"-2.794\" y1=\"1.27\" x2=\"-2.032\" y2=\"2.54\" layer=\"94\"/>\n<rectangle x1=\"-2.794\" y1=\"-0.889\" x2=\"-2.032\" y2=\"0.889\" layer=\"94\"/>\n<pin name=\"G\" x=\"-7.62\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\"/>\n<pin name=\"D\" x=\"0\" y=\"5.08\" visible=\"off\" length=\"short\" direction=\"pas\" rot=\"R270\"/>\n<pin name=\"S\" x=\"0\" y=\"-5.08\" visible=\"off\" length=\"short\" direction=\"pas\" rot=\"R90\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"DIODE-SCHOTTKY\" prefix=\"D\">\n<description>Schottky diodes in SFE's production catalog&lt;p&gt;\n\nBAT20J 1A 23V 0.62Vf&lt;br&gt;\nRB751 120mA 40V 0.37Vf&lt;br&gt;\nPMEG4005EJ 0.5A 40V 0.42Vf&lt;br&gt;\nMBRA140 1A 40V 0.5Vf&lt;br&gt;\nB340A  3A 40V SMA &lt;br&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"DIODE-SCHOTTKY\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-BAT20J\" package=\"SOD-323\">\n<connects>\n<connect gate=\"G$1\" pin=\"A\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"C\" pad=\"C\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"DIO-11623\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"BAT20J\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-RB751\" package=\"SOD-523\">\n<connects>\n<connect gate=\"G$1\" pin=\"A\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"C\" pad=\"C\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"DIO-11018\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"RB751\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-MBRA140\" package=\"SMA-DIODE\">\n<connects>\n<connect gate=\"G$1\" pin=\"A\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"C\" pad=\"C\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"DIO-08053\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"MBRA140\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-PMEG4005EJ\" package=\"SOD-323\">\n<connects>\n<connect gate=\"G$1\" pin=\"A\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"C\" pad=\"C\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"DIO-10955\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"PMEG4005EJ\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-B340A\" package=\"SMA-DIODE\">\n<connects>\n<connect gate=\"G$1\" pin=\"A\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"C\" pad=\"C\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"DIO-09886\"/>\n<attribute name=\"VALUE\" value=\"B340A\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"MOSFET-PCHANNEL\" prefix=\"Q\">\n<description>Generic PMOSFET\n\n&lt;ul&gt;\n&lt;li&gt;\nIRLML2244 - TRANS-11153 \n(SOT-23 -20V -4.3A) \n(1.Gate 2.Source 3.Drain)\n&lt;/li&gt;\n&lt;li&gt;\nFQP27P06 - \n&lt;a href=\"http://www.sparkfun.com/products/10349\"&gt;COM-10349&lt;/a&gt;\n(TO-220 -60V -27A)\n(1.Gate 2.Source 3.Drain)\n&lt;/li&gt;\n&lt;/ul&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"MOSFET-PCHANNEL\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"SMD\" package=\"SOT23-3\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"IRLML2244\" package=\"SOT23-3\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"TRANS-11153\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"\" package=\"SOT23-3\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"TRANS-08285\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"FQP27P06\" package=\"TO220V\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"DMG2307L\" package=\"SOT23-3\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"TRANS-11308\"/>\n<attribute name=\"VALUE\" value=\"2.5A/30V\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"NDP6020P_20V_24A_LOW_VGS_TH\" package=\"TO220V\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"TRANS-13060\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"Eagle_FPC_CONNECTOR_AND_FFC_CAB_rev15c\">\n<description>&lt;BR&gt;Wurth Elektronik   FPC Connector and FFC Cable&lt;br&gt;&lt;Hr&gt;\n&lt;BR&gt;&lt;BR&gt; \n&lt;TABLE BORDER=0 CELLSPACING=0 CELLPADDING=0&gt;\n&lt;TR&gt;   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;&lt;br&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt; &lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------------------------&lt;BR&gt;\n&lt;B&gt;&lt;I&gt;&lt;span style='font-size:26pt;\n  color:#FF6600;'&gt;WE &lt;/span&gt;&lt;/i&gt;&lt;/b&gt;\n&lt;BR&gt;\n      ---------------------------&lt;BR&gt;&lt;b&gt;Würth Elektronik&lt;/b&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n\n  &lt;TR&gt;\n    &lt;TD COLSPAN=7&gt;&amp;nbsp;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n  \n&lt;/TABLE&gt;\n&lt;B&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;More than you expect&lt;BR&gt;&lt;BR&gt;&lt;BR&gt;&lt;/B&gt;\n\n&lt;HR&gt;&lt;BR&gt;\n&lt;b&gt;Würth Elektronik eiSos GmbH &amp; Co. KG&lt;/b&gt;&lt;br&gt;\nEMC &amp; Inductive Solutions&lt;br&gt;\n\nMax-Eyth-Str.1&lt;br&gt;\nD-74638 Waldenburg&lt;br&gt;\n&lt;br&gt;\nTel: +49 (0)7942-945-0&lt;br&gt;\nFax:+49 (0)7942-945-405&lt;br&gt;\n&lt;br&gt;\n&lt;a href=\"http://www.we-online.com/eagle\"&gt;http://www.we-online.com/eagle&lt;/a&gt;&lt;br&gt;\n&lt;a href=\"mailto:libraries@we-online.com\"&gt;libraries@we-online.com&lt;/a&gt; &lt;BR&gt;&lt;BR&gt;\n&lt;br&gt;&lt;HR&gt;&lt;BR&gt;\nNeither CadSoft nor WE-eiSos does warrant that this library is error-free or &lt;br&gt;\nthat it meets your specific requirements.&lt;br&gt;&lt;BR&gt;\nPlease contact us for more information.&lt;br&gt;&lt;BR&gt;&lt;br&gt;\n&lt;hr&gt;\nEagle Version 6, Library Revision 2015b, 08.04.2015&lt;br&gt;\n&lt;HR&gt;\nCopyright: Würth Elektronik</description>\n<packages>\n<package name=\"68711014522\">\n<description>&lt;b&gt;WR-FPC 0.5mm SMT ZIF Horizontal Bottom Contact, 10 Pins</description>\n<wire x1=\"5.8\" y1=\"-4.1\" x2=\"5.8\" y2=\"1.5\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.8\" y1=\"1.5\" x2=\"-5.8\" y2=\"-4.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.8\" y1=\"1.5\" x2=\"-5.8\" y2=\"1.5\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.8\" y1=\"-4.1\" x2=\"5.8\" y2=\"-4.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.7\" y1=\"0.2\" x2=\"5.7\" y2=\"0.2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-5.7\" y1=\"-4.1\" x2=\"5.7\" y2=\"-4.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"5.7\" y1=\"0.2\" x2=\"5.7\" y2=\"-4.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-5.7\" y1=\"-4.1\" x2=\"-5.7\" y2=\"0.2\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"Z2\" x=\"4.18\" y=\"-1.38\" dx=\"2.7\" dy=\"3\" layer=\"1\"/>\n<smd name=\"Z1\" x=\"-4.18\" y=\"-1.38\" dx=\"2.7\" dy=\"3\" layer=\"1\"/>\n<smd name=\"1\" x=\"-2.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"-1.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"3\" x=\"-1.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"4\" x=\"-0.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"5\" x=\"-0.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"6\" x=\"0.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"7\" x=\"0.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"8\" x=\"1.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"9\" x=\"1.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"10\" x=\"2.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-2.944\" y=\"2.1101\" size=\"1.27\" layer=\"25\">&gt;NAME</text>\n<text x=\"-2.8\" y=\"-1.5\" size=\"1.27\" layer=\"51\">1</text>\n<text x=\"-3.329\" y=\"-5.7066\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n</package>\n</packages>\n<symbols>\n<symbol name=\"10\">\n<wire x1=\"-1.651\" y1=\"13.589\" x2=\"-1.651\" y2=\"11.811\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"11.049\" x2=\"-1.651\" y2=\"9.271\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"8.509\" x2=\"-1.651\" y2=\"6.731\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"5.969\" x2=\"-1.651\" y2=\"4.191\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"3.429\" x2=\"-1.651\" y2=\"1.651\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"0.889\" x2=\"-1.651\" y2=\"-0.889\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"-1.651\" x2=\"-1.651\" y2=\"-3.429\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"-4.191\" x2=\"-1.651\" y2=\"-5.969\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"-6.731\" x2=\"-1.651\" y2=\"-8.509\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"-9.271\" x2=\"-1.651\" y2=\"-11.049\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<text x=\"3.81\" y=\"0.238\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"3.81\" y=\"-2.54\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"1\" x=\"-5.08\" y=\"12.7\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"2\" x=\"-5.08\" y=\"10.16\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"3\" x=\"-5.08\" y=\"7.62\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"4\" x=\"-5.08\" y=\"5.08\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"5\" x=\"-5.08\" y=\"2.54\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"6\" x=\"-5.08\" y=\"0\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"7\" x=\"-5.08\" y=\"-2.54\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"8\" x=\"-5.08\" y=\"-5.08\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"9\" x=\"-5.08\" y=\"-7.62\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"10\" x=\"-5.08\" y=\"-10.16\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"68711014522\" prefix=\"K\">\n<description>&lt;b&gt;WR-FPC 0.5mm SMT ZIF Horizontal Bottom Contact, 10 Pins&lt;/b&gt;=&gt;Code : Con_FPC_ZIF_0.50_68711014522\n&lt;br&gt;&lt;a href=\"http://katalog.we-online.de/media/images/eican/Con_FPC_ZIF_0.50_6871xx14522_pf2.jpg\" title=\"Enlarge picture\"&gt;\n&lt;img src=\"http://katalog.we-online.de/media/thumbs2/eican/thb_Con_FPC_ZIF_0.50_6871xx14522_pf2.jpg\" width=\"320\"&gt;&lt;/a&gt;&lt;p&gt;\nDetails see: &lt;a href=\"http://katalog.we-online.de/en/em/687_1xx_145_22\"&gt;http://katalog.we-online.de/en/em/687_1xx_145_22&lt;/a&gt;&lt;p&gt;\nCreated 2014-07-09, Karrer Zheng&lt;br&gt;\n2014 (C) Würth Elektronik</description>\n<gates>\n<gate name=\"G$1\" symbol=\"10\" x=\"-2.54\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"68711014522\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"10\" pad=\"10\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"3\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"4\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"5\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"6\" pad=\"6\"/>\n<connect gate=\"G$1\" pin=\"7\" pad=\"7\"/>\n<connect gate=\"G$1\" pin=\"8\" pad=\"8\"/>\n<connect gate=\"G$1\" pin=\"9\" pad=\"9\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"supply1\">\n<description>&lt;b&gt;Supply Symbols&lt;/b&gt;&lt;p&gt;\n GND, VCC, 0V, +5V, -5V, etc.&lt;p&gt;\n Please keep in mind, that these devices are necessary for the\n automatic wiring of the supply signals.&lt;p&gt;\n The pin name defined in the symbol is identical to the net which is to be wired automatically.&lt;p&gt;\n In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.&lt;p&gt;\n &lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>\n<packages>\n</packages>\n<symbols>\n<symbol name=\"GND\">\n<wire x1=\"-1.905\" y1=\"0\" x2=\"1.905\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"-2.54\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"GND\" x=\"0\" y=\"2.54\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R270\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"GND\" prefix=\"GND\">\n<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>\n<gates>\n<gate name=\"1\" symbol=\"GND\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"Microchip_By_element14_Batch_1\">\n<description>Developed by element14 :&lt;br&gt;\nelement14 CAD Library consolidation.ulp\nat 30/07/2012 11:22:31</description>\n<packages>\n<package name=\"SOT95P270X145-6N\">\n<smd name=\"1\" x=\"-1.2954\" y=\"0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"2\" x=\"-1.2954\" y=\"0\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"3\" x=\"-1.2954\" y=\"-0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"4\" x=\"1.2954\" y=\"-0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"5\" x=\"1.2954\" y=\"0\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"6\" x=\"1.2954\" y=\"0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<wire x1=\"-0.889\" y1=\"0.6858\" x2=\"-0.889\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"1.1938\" x2=\"-1.6002\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"1.1938\" x2=\"-1.6002\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"0.6858\" x2=\"-0.889\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-0.254\" x2=\"-0.889\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"0.254\" x2=\"-1.6002\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"0.254\" x2=\"-1.6002\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-0.254\" x2=\"-0.889\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-1.1938\" x2=\"-0.889\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-0.6858\" x2=\"-1.6002\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-0.6858\" x2=\"-1.6002\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-1.1938\" x2=\"-0.889\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-0.6858\" x2=\"0.889\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-1.1938\" x2=\"1.6002\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-1.1938\" x2=\"1.6002\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-0.6858\" x2=\"0.889\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"0.254\" x2=\"0.889\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-0.254\" x2=\"1.6002\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-0.254\" x2=\"1.6002\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"0.254\" x2=\"0.889\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"1.1938\" x2=\"0.889\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"0.6858\" x2=\"1.6002\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"0.6858\" x2=\"1.6002\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"1.1938\" x2=\"0.889\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-1.5494\" x2=\"0.889\" y2=\"-1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-1.5494\" x2=\"0.889\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"1.5494\" x2=\"0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.3048\" y1=\"1.5494\" x2=\"-0.889\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"1.5494\" x2=\"-0.889\" y2=\"-1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0\" layer=\"51\" curve=\"-180\"/>\n<text x=\"-2.1336\" y=\"1.3716\" size=\"1.27\" layer=\"51\" ratio=\"6\" rot=\"SR0\">*</text>\n<wire x1=\"-0.5588\" y1=\"-1.5494\" x2=\"0.5588\" y2=\"-1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.5588\" y1=\"1.5494\" x2=\"0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"-0.3048\" y1=\"1.5494\" x2=\"-0.5588\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0\" layer=\"21\" curve=\"-180\"/>\n<text x=\"-2.1336\" y=\"1.3716\" size=\"1.27\" layer=\"21\" ratio=\"6\" rot=\"SR0\">*</text>\n<text x=\"-4.699\" y=\"2.032\" size=\"2.0828\" layer=\"25\" ratio=\"10\" rot=\"SR0\">&gt;NAME</text>\n<text x=\"-5.5372\" y=\"-4.0386\" size=\"2.0828\" layer=\"27\" ratio=\"10\" rot=\"SR0\">&gt;VALUE</text>\n</package>\n</packages>\n<symbols>\n<symbol name=\"MCP1640CT-I/CHY\">\n<pin name=\"VIN\" x=\"-17.78\" y=\"5.08\" length=\"middle\" direction=\"in\"/>\n<pin name=\"SW\" x=\"-17.78\" y=\"0\" length=\"middle\" direction=\"in\"/>\n<pin name=\"EN\" x=\"-17.78\" y=\"-2.54\" length=\"middle\" direction=\"in\"/>\n<pin name=\"VFB\" x=\"-17.78\" y=\"-5.08\" length=\"middle\" direction=\"in\"/>\n<pin name=\"GND\" x=\"-17.78\" y=\"-10.16\" length=\"middle\" direction=\"pas\"/>\n<pin name=\"VOUT\" x=\"17.78\" y=\"5.08\" length=\"middle\" direction=\"out\" rot=\"R180\"/>\n<wire x1=\"-13.208\" y1=\"5.08\" x2=\"-14.2748\" y2=\"5.588\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-13.208\" y1=\"5.08\" x2=\"-14.2748\" y2=\"4.572\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-13.208\" y1=\"0\" x2=\"-14.2748\" y2=\"0.508\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-13.208\" y1=\"0\" x2=\"-14.2748\" y2=\"-0.508\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-13.208\" y1=\"-2.54\" x2=\"-14.2748\" y2=\"-2.032\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-13.208\" y1=\"-2.54\" x2=\"-14.2748\" y2=\"-3.048\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"13.208\" y1=\"5.588\" x2=\"14.2748\" y2=\"5.08\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"13.208\" y1=\"4.572\" x2=\"14.2748\" y2=\"5.08\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-12.7\" y1=\"10.16\" x2=\"-12.7\" y2=\"-15.24\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-12.7\" y1=\"-15.24\" x2=\"12.7\" y2=\"-15.24\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"12.7\" y1=\"-15.24\" x2=\"12.7\" y2=\"10.16\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"12.7\" y1=\"10.16\" x2=\"-12.7\" y2=\"10.16\" width=\"0.4064\" layer=\"94\"/>\n<text x=\"-4.9276\" y=\"12.573\" size=\"2.0828\" layer=\"95\" ratio=\"10\" rot=\"SR0\">&gt;NAME</text>\n<text x=\"-5.1054\" y=\"-19.9136\" size=\"2.0828\" layer=\"96\" ratio=\"10\" rot=\"SR0\">&gt;VALUE</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"MCP1640CT-I/CHY\">\n<description>Synchronous Boost Regulator</description>\n<gates>\n<gate name=\"A\" symbol=\"MCP1640CT-I/CHY\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"SOT95P270X145-6N\">\n<connects>\n<connect gate=\"A\" pin=\"EN\" pad=\"3\"/>\n<connect gate=\"A\" pin=\"GND\" pad=\"2\"/>\n<connect gate=\"A\" pin=\"SW\" pad=\"1\"/>\n<connect gate=\"A\" pin=\"VFB\" pad=\"4\"/>\n<connect gate=\"A\" pin=\"VIN\" pad=\"6\"/>\n<connect gate=\"A\" pin=\"VOUT\" pad=\"5\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"MPN\" value=\"MCP1640CT-I/CHY\" constant=\"no\"/>\n<attribute name=\"OC_FARNELL\" value=\"1800208\" constant=\"no\"/>\n<attribute name=\"OC_NEWARK\" value=\"73R3626\" constant=\"no\"/>\n<attribute name=\"PACKAGE\" value=\"SOT-6\" constant=\"no\"/>\n<attribute name=\"SUPPLIER\" value=\"Microchip\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"EMCComponents (rev19e)\">\n<description>&lt;BR&gt;Wurth Elektronik - EMC Components, Power Magnetics, Signal &amp; Communications&lt;br&gt;&lt;Hr&gt;\n&lt;BR&gt;&lt;BR&gt; \n&lt;TABLE BORDER=0 CELLSPACING=0 CELLPADDING=0&gt;\n&lt;TR&gt;   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;&lt;br&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt; &lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------------------------&lt;BR&gt;\n&lt;B&gt;&lt;I&gt;&lt;span style='font-size:26pt;\n  color:#FF6600;'&gt;WE &lt;/span&gt;&lt;/i&gt;&lt;/b&gt;\n&lt;BR&gt;\n      ---------------------------&lt;BR&gt;&lt;b&gt;Würth Elektronik&lt;/b&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n\n  &lt;TR&gt;\n    &lt;TD COLSPAN=7&gt;&amp;nbsp;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n  \n&lt;/TABLE&gt;\n&lt;B&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;More than you expect&lt;BR&gt;&lt;BR&gt;&lt;BR&gt;&lt;/B&gt;\n\n&lt;HR&gt;&lt;BR&gt;\n&lt;b&gt;Würth Elektronik eiSos GmbH &amp; Co. KG&lt;/b&gt;&lt;br&gt;\nEMC &amp; Inductive Solutions&lt;br&gt;\n\nMax-Eyth-Str.1&lt;br&gt;\nD-74638 Waldenburg&lt;br&gt;\n&lt;br&gt;\nTel: +49 (0)7942-945-0&lt;br&gt;\nFax:+49 (0)7942-945-5000&lt;br&gt;\n&lt;br&gt;\n&lt;a href=\"http://www.we-online.com/web/en/electronic_components/produkte_pb/bauteilebibliotheken/eagle_4.php\"&gt;www.we-online.com/eagle&lt;/a&gt;&lt;br&gt;\n&lt;a href=\"mailto:libraries@we-online.com\"&gt;libraries@we-online.com&lt;/a&gt; &lt;BR&gt;&lt;BR&gt;\n&lt;br&gt;&lt;HR&gt;&lt;BR&gt;\nNeither Autodesk nor Würth Elektronik eiSos does warrant that this library is error-free or &lt;br&gt;\nthat it meets your specific requirements.&lt;br&gt;&lt;BR&gt;\nPlease contact us for more information.&lt;br&gt;&lt;BR&gt;&lt;br&gt;\n\n&lt;HR&gt;\nEagle Version 6, Library Revision 2019e, 2019-06-27&lt;br&gt;\n\n&lt;HR&gt;\nCopyright: Würth Elektronik</description>\n<packages>\n<package name=\"WE-TPC_2811/2813_OLD\">\n<wire x1=\"-1.4\" y1=\"1.4\" x2=\"1.4\" y2=\"1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.4\" y1=\"1.4\" x2=\"1.4\" y2=\"-1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.4\" y1=\"-1.4\" x2=\"-1.4\" y2=\"-1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"-1.4\" x2=\"-1.4\" y2=\"1.4\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.1\" y=\"0\" dx=\"3.2\" dy=\"1\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"2\" x=\"1.1\" y=\"0\" dx=\"3.2\" dy=\"1\" layer=\"1\" rot=\"R90\"/>\n<text x=\"-1.56\" y=\"2.18\" size=\"0.6096\" layer=\"27\">&gt;VALUE</text>\n<text x=\"-0.21\" y=\"-2.6\" size=\"0.6096\" layer=\"25\" align=\"bottom-center\">&gt;NAME</text>\n<wire x1=\"-0.4\" y1=\"1.4\" x2=\"0.4\" y2=\"1.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-0.4\" y1=\"-1.4\" x2=\"0.4\" y2=\"-1.4\" width=\"0.127\" layer=\"21\"/>\n<polygon width=\"0.127\" layer=\"39\">\n<vertex x=\"-1.8\" y=\"1.8\"/>\n<vertex x=\"1.8\" y=\"1.8\"/>\n<vertex x=\"1.8\" y=\"-1.8\"/>\n<vertex x=\"-1.8\" y=\"-1.8\"/>\n</polygon>\n</package>\n</packages>\n<symbols>\n<symbol name=\"L\">\n<wire x1=\"-5.08\" y1=\"0\" x2=\"-2.54\" y2=\"0\" width=\"0.254\" layer=\"94\" curve=\"-180\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"0\" y2=\"0\" width=\"0.254\" layer=\"94\" curve=\"-180\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"2.54\" y2=\"0\" width=\"0.254\" layer=\"94\" curve=\"-180\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"5.08\" y2=\"0\" width=\"0.254\" layer=\"94\" curve=\"-180\"/>\n<pin name=\"1\" x=\"-7.62\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\"/>\n<pin name=\"2\" x=\"7.62\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\" rot=\"R180\"/>\n<text x=\"-2.54\" y=\"5.08\" size=\"1.27\" layer=\"95\">&gt;Name</text>\n<text x=\"-2.54\" y=\"-2.54\" size=\"1.27\" layer=\"96\">&gt;Value</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"WE-TPC_2813\" prefix=\"L\" uservalue=\"yes\">\n<description>&lt;b&gt;SMD Shielded Tiny Power Inductor\n&lt;br&gt;\n&lt;br&gt;\n&lt;br&gt;&lt;b&gt; Characteristics\n&lt;br&gt;\n&lt;br&gt;&lt;/b&gt;&lt;/b&gt; Extremely flat power inductor\n&lt;br&gt;\n&lt;br&gt; High current capability\n&lt;br&gt;\n&lt;br&gt; Magnetically shielded which results in a low leakage field\n&lt;br&gt;\n&lt;brr&gt; Operating temperature: –40 °C to +125 °C\n&lt;br&gt;\n&lt;br&gt;\n&lt;br&gt;&lt;b&gt; Applications\n&lt;br&gt;\n&lt;br&gt;&lt;/b&gt; Portable power like PDA, digital camera, PCMCIA cards and displays\n&lt;br&gt;\n&lt;br&gt; DC/DC converter\n&lt;br&gt;\n&lt;br&gt; Embedded PC\n&lt;br&gt;\n&lt;br&gt; Mobile data gathering, telemetric\n&lt;br&gt;\n&lt;br&gt;\n&lt;br&gt;\n&lt;br&gt;&lt;a href=\"http://katalog.we-online.de/media/images/v2/WE-TPC_Gruppe_2.jpg\" title=\"Enlarge picture\"&gt;\n&lt;img src=\"http://katalog.we-online.de/media/images/v2/WE-TPC_Gruppe_2.jpg\" width=\"320\"&gt;&lt;/a&gt;&lt;p&gt;\nDetails see: &lt;a href=\"http://katalog.we-online.de/en/pbs/WE-TPC?\"&gt;http://katalog.we-online.de/en/pbs/WE-TPC?&lt;/a&gt;&lt;p&gt;\n\n&lt;/b&gt;Updated  by  Dan Xu 2014-07-11&lt;br&gt;\n&lt;/b&gt;2014 (C) Wurth Elektronik</description>\n<gates>\n<gate name=\"G$1\" symbol=\"L\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"WE-TPC_2811/2813_OLD\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"_744029000068\">\n<attribute name=\"WE-NUMBER\" value=\"744029000068/0,068uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_74402900016\">\n<attribute name=\"WE-NUMBER\" value=\"744029000016/0,16uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_74402900033\">\n<attribute name=\"WE-NUMBER\" value=\"74402900033/0,33uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_74402900047\">\n<attribute name=\"WE-NUMBER\" value=\"74402900047/0,47uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_74402900082\">\n<attribute name=\"WE-NUMBER\" value=\"74402900082/0,82uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029001\">\n<attribute name=\"WE-NUMBER\" value=\"744029001/1uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029002\">\n<attribute name=\"WE-NUMBER\" value=\"744029002/2,2uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029003\">\n<attribute name=\"WE-NUMBER\" value=\"744029003/3,3uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029004\">\n<attribute name=\"WE-NUMBER\" value=\"744029004/4,7uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029006\">\n<attribute name=\"WE-NUMBER\" value=\"744029006/6,8uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029100\">\n<attribute name=\"WE-NUMBER\" value=\"744029100/10uH\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"MPU-6050 hand solder\">\n<packages>\n<package name=\"QFN-24-4MM2\">\n<circle x=\"-1.78\" y=\"1.78\" radius=\"0.0632\" width=\"0.127\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"0.2\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"-2\" y1=\"2\" x2=\"2\" y2=\"2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"2\" x2=\"2\" y2=\"-2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"-2\" x2=\"-2\" y2=\"-2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-2\" y1=\"-2\" x2=\"-2\" y2=\"2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.8\" y1=\"2.1\" x2=\"2.1\" y2=\"2.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.1\" y1=\"2.1\" x2=\"2.1\" y2=\"1.8\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"1.8\" y1=\"-2.1\" x2=\"2.1\" y2=\"-2.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.1\" y1=\"-2.1\" x2=\"2.1\" y2=\"-1.8\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-1.8\" y1=\"-2.1\" x2=\"-2.1\" y2=\"-2.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-2.1\" y1=\"-2.1\" x2=\"-2.1\" y2=\"-1.8\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-2.1\" y1=\"1.8\" x2=\"-1.8\" y2=\"2.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0.2\" x2=\"0\" y2=\"1.4\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"-0.2\" y1=\"1.2\" x2=\"0\" y2=\"1.4\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"1.4\" x2=\"0.2\" y2=\"1.2\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"-0.3\" y1=\"0.7\" x2=\"0.3\" y2=\"0.7\" width=\"0.1\" layer=\"51\" curve=\"-161.075356\"/>\n<wire x1=\"0.4\" y1=\"0.8\" x2=\"0.3\" y2=\"0.7\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"0.3\" y1=\"0.7\" x2=\"0.2\" y2=\"0.7\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"0.2\" y1=\"0\" x2=\"1.4\" y2=\"0\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"1.2\" y1=\"0.2\" x2=\"1.4\" y2=\"0\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"1.4\" y1=\"0\" x2=\"1.2\" y2=\"-0.2\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"0.7\" y1=\"0.3\" x2=\"0.7\" y2=\"-0.3\" width=\"0.1\" layer=\"51\" curve=\"-161.075356\"/>\n<wire x1=\"0.8\" y1=\"-0.4\" x2=\"0.7\" y2=\"-0.3\" width=\"0.1\" layer=\"51\"/>\n<wire x1=\"0.7\" y1=\"-0.3\" x2=\"0.7\" y2=\"-0.2\" width=\"0.1\" layer=\"51\"/>\n<rectangle x1=\"-0.8382\" y1=\"0.3302\" x2=\"-0.3556\" y2=\"0.8128\" layer=\"31\"/>\n<rectangle x1=\"0.4318\" y1=\"0.3302\" x2=\"0.9144\" y2=\"0.8128\" layer=\"31\"/>\n<rectangle x1=\"-0.8255\" y1=\"-0.8763\" x2=\"-0.3429\" y2=\"-0.3937\" layer=\"31\"/>\n<rectangle x1=\"0.3937\" y1=\"-0.8763\" x2=\"0.8763\" y2=\"-0.3937\" layer=\"31\"/>\n<smd name=\"1\" x=\"-2.3162\" y=\"1.2567\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"-2.3162\" y=\"0.7496\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"-2.3162\" y=\"0.2475\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"4\" x=\"-2.3162\" y=\"-0.2875\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"5\" x=\"-2.3162\" y=\"-0.7921\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"6\" x=\"-2.3162\" y=\"-1.2967\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"7\" x=\"-1.2667\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"8\" x=\"-0.7621\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"9\" x=\"-0.2575\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"10\" x=\"0.2775\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"11\" x=\"0.7796\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"12\" x=\"1.2867\" y=\"-2.3716\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"13\" x=\"2.3362\" y=\"-1.2967\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"14\" x=\"2.3362\" y=\"-0.7921\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"15\" x=\"2.3362\" y=\"-0.2875\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"16\" x=\"2.3362\" y=\"0.2475\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"17\" x=\"2.3362\" y=\"0.7496\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"18\" x=\"2.3362\" y=\"1.2567\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"19\" x=\"1.2867\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"20\" x=\"0.7796\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"21\" x=\"0.2775\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"22\" x=\"-0.2575\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"23\" x=\"-0.7621\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"24\" x=\"-1.2667\" y=\"2.3316\" dx=\"1.516\" dy=\"0.254\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"P$1\" x=\"0.02\" y=\"-0.01\" dx=\"2.6162\" dy=\"2.6162\" layer=\"1\" cream=\"no\"/>\n<text x=\"-0.6\" y=\"1\" size=\"0.254\" layer=\"51\">Y</text>\n<text x=\"1.1\" y=\"0.4\" size=\"0.254\" layer=\"51\">X</text>\n<text x=\"-0.1\" y=\"-0.6\" size=\"0.254\" layer=\"51\">Z</text>\n</package>\n</packages>\n<symbols>\n<symbol name=\"MPU-6050\">\n<wire x1=\"-12.7\" y1=\"10.16\" x2=\"-12.7\" y2=\"-10.16\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-12.7\" y1=\"-10.16\" x2=\"12.7\" y2=\"-10.16\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"12.7\" y1=\"-10.16\" x2=\"12.7\" y2=\"10.16\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"12.7\" y1=\"10.16\" x2=\"-12.7\" y2=\"10.16\" width=\"0.254\" layer=\"94\"/>\n<pin name=\"AD0\" x=\"17.78\" y=\"-2.54\" length=\"middle\" rot=\"R180\"/>\n<pin name=\"AUX_CL\" x=\"17.78\" y=\"7.62\" length=\"middle\" rot=\"R180\"/>\n<pin name=\"AUX_DA\" x=\"17.78\" y=\"5.08\" length=\"middle\" rot=\"R180\"/>\n<pin name=\"CLKIN\" x=\"-17.78\" y=\"0\" length=\"middle\"/>\n<pin name=\"CPOUT\" x=\"-17.78\" y=\"-5.08\" length=\"middle\"/>\n<pin name=\"FSYNC\" x=\"-17.78\" y=\"2.54\" length=\"middle\"/>\n<pin name=\"GND\" x=\"-17.78\" y=\"-7.62\" length=\"middle\"/>\n<pin name=\"INT\" x=\"-17.78\" y=\"5.08\" length=\"middle\"/>\n<pin name=\"REGOUT\" x=\"-17.78\" y=\"-2.54\" length=\"middle\"/>\n<pin name=\"SCL\" x=\"17.78\" y=\"2.54\" length=\"middle\" rot=\"R180\"/>\n<pin name=\"SDA\" x=\"17.78\" y=\"0\" length=\"middle\" rot=\"R180\"/>\n<pin name=\"VDD\" x=\"-17.78\" y=\"7.62\" length=\"middle\"/>\n<pin name=\"VLOGIC\" x=\"17.78\" y=\"-5.08\" length=\"middle\" rot=\"R180\"/>\n<text x=\"-12.7\" y=\"10.16\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"-12.7\" y=\"-12.7\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"MPU-6050\">\n<gates>\n<gate name=\"G$1\" symbol=\"MPU-6050\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-1\" package=\"QFN-24-4MM2\">\n<connects>\n<connect gate=\"G$1\" pin=\"AD0\" pad=\"9\"/>\n<connect gate=\"G$1\" pin=\"AUX_CL\" pad=\"7\"/>\n<connect gate=\"G$1\" pin=\"AUX_DA\" pad=\"6\"/>\n<connect gate=\"G$1\" pin=\"CLKIN\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"CPOUT\" pad=\"20\"/>\n<connect gate=\"G$1\" pin=\"FSYNC\" pad=\"11\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"18\"/>\n<connect gate=\"G$1\" pin=\"INT\" pad=\"12\"/>\n<connect gate=\"G$1\" pin=\"REGOUT\" pad=\"10\"/>\n<connect gate=\"G$1\" pin=\"SCL\" pad=\"23\"/>\n<connect gate=\"G$1\" pin=\"SDA\" pad=\"24\"/>\n<connect gate=\"G$1\" pin=\"VDD\" pad=\"13\"/>\n<connect gate=\"G$1\" pin=\"VLOGIC\" pad=\"8\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"Eagle_TACT_SWITCHES_rev16d\">\n<description>&lt;BR&gt;Wurth Elektronik - Switches&lt;br&gt;&lt;Hr&gt;\n&lt;BR&gt;&lt;BR&gt; \n&lt;TABLE BORDER=0 CELLSPACING=0 CELLPADDING=0&gt;\n&lt;TR&gt;   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;&lt;br&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt; &lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------------------------&lt;BR&gt;\n&lt;B&gt;&lt;I&gt;&lt;span style='font-size:26pt;\n  color:#FF6600;'&gt;WE &lt;/span&gt;&lt;/i&gt;&lt;/b&gt;\n&lt;BR&gt;\n      ---------------------------&lt;BR&gt;&lt;b&gt;Würth Elektronik&lt;/b&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n\n  &lt;TR&gt;\n    &lt;TD COLSPAN=7&gt;&amp;nbsp;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n  \n&lt;/TABLE&gt;\n&lt;B&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;More than you expect&lt;BR&gt;&lt;BR&gt;&lt;BR&gt;&lt;/B&gt;\n\n&lt;HR&gt;&lt;BR&gt;\n&lt;b&gt;Würth Elektronik eiSos GmbH &amp; Co. KG&lt;/b&gt;&lt;br&gt;\nEMC &amp; Inductive Solutions&lt;br&gt;\n\nMax-Eyth-Str.1&lt;br&gt;\nD-74638 Waldenburg&lt;br&gt;\n&lt;br&gt;\nTel: +49 (0)7942-945-0&lt;br&gt;\nFax:+49 (0)7942-945-405&lt;br&gt;\n&lt;br&gt;\n&lt;a href=\"http://www.we-online.com/eagle\"&gt;http://www.we-online.com/eagle&lt;/a&gt;&lt;br&gt;\n&lt;a href=\"mailto:libraries@we-online.com\"&gt;libraries@we-online.com&lt;/a&gt; &lt;BR&gt;&lt;BR&gt;\n&lt;br&gt;&lt;HR&gt;&lt;BR&gt;\nNeither CadSoft nor WE-eiSos does warrant that this library is error-free or &lt;br&gt;\nthat it meets your specific requirements.&lt;br&gt;&lt;BR&gt;\nPlease contact us for more information.&lt;br&gt;&lt;BR&gt;&lt;br&gt;\n&lt;hr&gt;\nEagle Version 6, Library Revision 2016d, 2016-05-06&lt;br&gt;\n&lt;HR&gt;\nCopyright: Würth Elektronik</description>\n<packages>\n<package name=\"434331045822\">\n<description>WS-TUS-3.5x4.7 mm side push SMD Tact Switch, 4 pins</description>\n<smd name=\"4\" x=\"-2.8\" y=\"-0.85\" dx=\"1.2\" dy=\"1\" layer=\"1\"/>\n<smd name=\"3\" x=\"-2.8\" y=\"0.85\" dx=\"1.2\" dy=\"1\" layer=\"1\"/>\n<smd name=\"1\" x=\"2.8\" y=\"0.85\" dx=\"1.2\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"2.8\" y=\"-0.85\" dx=\"1.2\" dy=\"1\" layer=\"1\"/>\n<text x=\"-3.4248\" y=\"2.8505\" size=\"1.27\" layer=\"25\">&gt;NAME</text>\n<text x=\"-3.4248\" y=\"-4.6286\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n<wire x1=\"-2.35\" y1=\"-1.75\" x2=\"-1.3\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"1.3\" y1=\"-1.75\" x2=\"2.35\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.35\" y1=\"-1.75\" x2=\"2.35\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2.35\" y1=\"1.75\" x2=\"-2.35\" y2=\"1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-2.35\" y1=\"1.75\" x2=\"-2.35\" y2=\"-1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.3\" y1=\"-2.25\" x2=\"1.3\" y2=\"-2.25\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"1.3\" y1=\"-2.25\" x2=\"1.3\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"1.3\" y1=\"-1.75\" x2=\"-1.3\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-1.3\" y1=\"-1.75\" x2=\"-1.3\" y2=\"-2.25\" width=\"0.127\" layer=\"21\"/>\n<text x=\"1.1\" y=\"0.2\" size=\"1.27\" layer=\"51\">1</text>\n<wire x1=\"-2.35\" y1=\"1.75\" x2=\"-2.35\" y2=\"1.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.35\" y1=\"1.75\" x2=\"2.35\" y2=\"1.56\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-2.35\" y1=\"-0.16\" x2=\"-2.35\" y2=\"0.15\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.35\" y1=\"0.15\" x2=\"2.35\" y2=\"-0.15\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.35\" y1=\"-1.54\" x2=\"2.35\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-2.35\" y1=\"-1.54\" x2=\"-2.35\" y2=\"-1.75\" width=\"0.127\" layer=\"21\"/>\n<polygon width=\"0.127\" layer=\"39\">\n<vertex x=\"-3.4\" y=\"2.4\"/>\n<vertex x=\"3.4\" y=\"2.4\"/>\n<vertex x=\"3.4\" y=\"-2.5\"/>\n<vertex x=\"-3.4\" y=\"-2.5\"/>\n</polygon>\n</package>\n</packages>\n<symbols>\n<symbol name=\"TUS\">\n<wire x1=\"8.89\" y1=\"5.08\" x2=\"8.89\" y2=\"-5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"8.89\" y1=\"-5.08\" x2=\"-8.89\" y2=\"-5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-8.89\" y1=\"-5.08\" x2=\"-8.89\" y2=\"5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-8.89\" y1=\"5.08\" x2=\"8.89\" y2=\"5.08\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-3.81\" y=\"6.35\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"-3.81\" y=\"-7.62\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"3\" x=\"-3.81\" y=\"2.54\" length=\"middle\" rot=\"R180\"/>\n<pin name=\"4\" x=\"-3.81\" y=\"-2.54\" length=\"middle\" rot=\"R180\"/>\n<pin name=\"1\" x=\"3.81\" y=\"2.54\" length=\"middle\"/>\n<pin name=\"2\" x=\"3.81\" y=\"-2.54\" length=\"middle\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"434331045822\" prefix=\"SW\" uservalue=\"yes\">\n<description>&lt;b&gt;3.5x4.7 mm SMD side push WS-TASU&lt;/b&gt;&lt;br&gt;\n&lt;BR&gt;\n&lt;BR&gt;\n&lt;br&gt;&lt;a href=\"http://katalog.we-online.de/media/images/v2/Family_WS_TUS_Normal_SMD_Side-Push_4343x10458xx_pf2.jpg\" title=\"Enlarge picture\"&gt;\n&lt;img src=\"http://katalog.we-online.de/media/images/v2/Family_WS_TUS_Normal_SMD_Side-Push_4343x10458xx_pf2.jpg\" width=\"320\"&gt;&lt;/a&gt;&lt;p&gt;\nDetails see: &lt;a href=\"http://katalog.we-online.de/en/em/TASU_3_5X4_7_SMD_SIDE_PUSH\"&gt;http://katalog.we-online.de/en/em/TASU_3_5X4_7_SMD_J-BEND_SIDE_PUSH&lt;/a&gt;&lt;p&gt;\n\n2015 (C) Wurth Elektronik</description>\n<gates>\n<gate name=\"G$1\" symbol=\"TUS\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"434331045822\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"3\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"4\" pad=\"4\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n</libraries>\n<attributes>\n</attributes>\n<variantdefs>\n</variantdefs>\n<classes>\n<class number=\"0\" name=\"default\" width=\"0\" drill=\"0\">\n</class>\n</classes>\n<parts>\n<part name=\"S1\" library=\"SparkFun-Electromechanical\" deviceset=\"JOYSTICK_MINI\" device=\"\" value=\"5-WAY-TACTILE-SWITCH\"/>\n<part name=\"SW1\" library=\"microbuilder\" deviceset=\"SWITCH_TACT_SMT\" device=\"_EVQQ2_SMALL\" value=\"EVQQ\"/>\n<part name=\"SW2\" library=\"microbuilder\" deviceset=\"SWITCH_TACT_SMT\" device=\"_EVQQ2_SMALL\" value=\"EVQQ\"/>\n<part name=\"U2\" library=\"SparkFun-RF\" deviceset=\"ESP-WROOM-32\" device=\"\" value=\"ESP-WROOM-32\"/>\n<part name=\"R8\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"C5\" library=\"SparkFun-Capacitors\" deviceset=\"10UF\" device=\"-0603-6.3V-20%\" value=\"10uF\"/>\n<part name=\"C3\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"C2\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"4.7uF\"/>\n<part name=\"GND5\" library=\"SparkFun-PowerSymbols\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND6\" library=\"SparkFun-PowerSymbols\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND7\" library=\"SparkFun-PowerSymbols\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND8\" library=\"SparkFun-PowerSymbols\" deviceset=\"GND\" device=\"\"/>\n<part name=\"SUPPLY2\" library=\"SparkFun-PowerSymbols\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"SUPPLY3\" library=\"SparkFun-PowerSymbols\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"SUPPLY5\" library=\"SparkFun-PowerSymbols\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"R17\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"R18\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"Q2\" library=\"esp32-thing-temp\" deviceset=\"MBT3904DW1T1\" device=\"\" value=\"MBT3904DW1T1\"/>\n<part name=\"U1\" library=\"SparkFun-PowerIC\" deviceset=\"MCP73831\" device=\"\"/>\n<part name=\"C6\" library=\"SparkFun-Capacitors\" deviceset=\"4.7UF\" device=\"0603\" value=\"4.7uF\"/>\n<part name=\"JP2\" library=\"SparkFun-Connectors\" deviceset=\"M02\" device=\"JST-PTH-2\" value=\"LiPo\"/>\n<part name=\"R6\" library=\"SparkFun-Resistors\" deviceset=\"2.0KOHM1/10W5%(0603)\" device=\"\" value=\"3.9k\"/>\n<part name=\"SUPPLY25\" library=\"SparkFun-Aesthetics\" deviceset=\"V_BATT\" device=\"\"/>\n<part name=\"C19\" library=\"SparkFun-Capacitors\" deviceset=\"4.7UF\" device=\"0603\" value=\"4.7uF\"/>\n<part name=\"SUPPLY23\" library=\"SparkFun-Aesthetics\" deviceset=\"V_USB\" device=\"\"/>\n<part name=\"GND41\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"C11\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"GND27\" library=\"SparkFun\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND26\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"C14\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"U4\" library=\"SparkFun-DigitalIC\" deviceset=\"FT231X\" device=\"S\" value=\"FT231XS\"/>\n<part name=\"R13\" library=\"SparkFun-Resistors\" deviceset=\"27OHM1/10W1%(0603)\" device=\"0603-RES\" value=\"27\"/>\n<part name=\"R14\" library=\"SparkFun-Resistors\" deviceset=\"27OHM1/10W1%(0603)\" device=\"0603-RES\" value=\"27\"/>\n<part name=\"C13\" library=\"SparkFun-Capacitors\" deviceset=\"47PF\" device=\"-0603-50V-5%\" value=\"47pF\"/>\n<part name=\"C12\" library=\"SparkFun-Capacitors\" deviceset=\"47PF\" device=\"-0603-50V-5%\" value=\"47pF\"/>\n<part name=\"GND29\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND28\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"C16\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"GND33\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND32\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND31\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND30\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"F1\" library=\"SparkFun-PowerIC\" deviceset=\"PTC\" device=\"SMD\" value=\"500mA\"/>\n<part name=\"C15\" library=\"SparkFun-Capacitors\" deviceset=\"4.7UF-6.3V-10%(0603)\" device=\"0603\" value=\"4.7uF\"/>\n<part name=\"SUPPLY14\" library=\"SparkFun-Aesthetics\" deviceset=\"V_USB\" device=\"\"/>\n<part name=\"GND2\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"C7\" library=\"SparkFun-Capacitors\" deviceset=\"1.0UF\" device=\"-0805-25V-(+80/-20%)\" value=\"1.0uF\"/>\n<part name=\"GND21\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND3\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"D3\" library=\"SparkFun-DiscreteSemi\" deviceset=\"DIODE-SCHOTTKY\" device=\"-BAT20J\" value=\"BAT20J\"/>\n<part name=\"R7\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"GND13\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"Q1\" library=\"SparkFun-DiscreteSemi\" deviceset=\"MOSFET-PCHANNEL\" device=\"DMG2307L\" value=\"2.5A/30V\"/>\n<part name=\"SUPPLY22\" library=\"SparkFun-Aesthetics\" deviceset=\"V_USB\" device=\"\"/>\n<part name=\"SUPPLY27\" library=\"SparkFun-Aesthetics\" deviceset=\"V_BATT\" device=\"\"/>\n<part name=\"SUPPLY8\" library=\"SparkFun-Aesthetics\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"R10\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"470k\"/>\n<part name=\"R11\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"470k\"/>\n<part name=\"GND16\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"S2\" library=\"SparkFun-Electromechanical\" deviceset=\"SWITCH-SPDT\" device=\"-SMD-A\"/>\n<part name=\"K1\" library=\"Eagle_FPC_CONNECTOR_AND_FFC_CAB_rev15c\" deviceset=\"68711014522\" device=\"\"/>\n<part name=\"GND10\" library=\"supply1\" deviceset=\"GND\" device=\"\"/>\n<part name=\"R1\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"0\"/>\n<part name=\"C1\" library=\"SparkFun-Capacitors\" deviceset=\"47PF\" device=\"-0603-50V-5%\" value=\"4.7uF\"/>\n<part name=\"C8\" library=\"SparkFun-Capacitors\" deviceset=\"47PF\" device=\"-0603-50V-5%\" value=\"10uF\"/>\n<part name=\"GND1\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND14\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"C4\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"C10\" library=\"SparkFun-Capacitors\" deviceset=\"1.0UF\" device=\"-0805-25V-(+80/-20%)\" value=\"2.2uF\"/>\n<part name=\"R2\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"R4\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"SUPPLY4\" library=\"SparkFun-Aesthetics\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"C9\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"U$1\" library=\"Microchip_By_element14_Batch_1\" deviceset=\"MCP1640CT-I/CHY\" device=\"\"/>\n<part name=\"L1\" library=\"EMCComponents (rev19e)\" deviceset=\"WE-TPC_2813\" device=\"\" technology=\"_744029004\" value=\"4.7µH\"/>\n<part name=\"R5\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"976k\"/>\n<part name=\"R9\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"309k\"/>\n<part name=\"GND15\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND17\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND4\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"J2\" library=\"SparkFun-Connectors\" deviceset=\"USB_C\" device=\"16PIN\"/>\n<part name=\"U$2\" library=\"MPU-6050 hand solder\" deviceset=\"MPU-6050\" device=\"-1\"/>\n<part name=\"R12\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"R15\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"C17\" library=\"SparkFun-Capacitors\" deviceset=\"47PF\" device=\"-0603-50V-5%\" value=\"10nF\"/>\n<part name=\"C18\" library=\"SparkFun-Capacitors\" deviceset=\"1.0UF\" device=\"-0805-25V-(+80/-20%)\" value=\"2.2uF\"/>\n<part name=\"C20\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"SW3\" library=\"Eagle_TACT_SWITCHES_rev16d\" deviceset=\"434331045822\" device=\"\"/>\n<part name=\"GND11\" library=\"supply1\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND12\" library=\"supply1\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND18\" library=\"supply1\" deviceset=\"GND\" device=\"\"/>\n<part name=\"SUPPLY1\" library=\"SparkFun-PowerSymbols\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"SUPPLY6\" library=\"SparkFun-PowerSymbols\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"SUPPLY7\" library=\"SparkFun-PowerSymbols\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"C21\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"GND19\" library=\"SparkFun-PowerSymbols\" deviceset=\"GND\" device=\"\"/>\n<part name=\"SUPPLY9\" library=\"SparkFun-PowerSymbols\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"R16\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"GND20\" library=\"supply1\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND22\" library=\"supply1\" deviceset=\"GND\" device=\"\"/>\n<part name=\"SUPPLY10\" library=\"SparkFun-PowerSymbols\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"U3\" library=\"SparkFun-PowerIC\" deviceset=\"V_REG_LDO\" device=\"SMD\" value=\"AP2112K-3.3V\">\n<attribute name=\"PROD_ID\" value=\"VREG-12457\"/>\n</part>\n<part name=\"R3\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"5.1k\"/>\n<part name=\"R19\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"5.1k\"/>\n<part name=\"GND23\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND24\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n</parts>\n<sheets>\n<sheet>\n<plain>\n<text x=\"154.94\" y=\"236.22\" size=\"2.54\" layer=\"94\" align=\"top-left\">ESP32 Wroom</text>\n<text x=\"246.38\" y=\"63.5\" size=\"1.905\" layer=\"97\" font=\"vector\">Boot Mode Configuration\nPin        Default     Boot   Download\nGPIO0        1         1       0\nU0TXD        1         1       x\nGPIO2        0         x       0\nGPIO4        0         x       x\nMTDO         1         x       x\nGPIO5        1         1       x\nIf U0TXD, GPIO2, GPIO5 are floating, \nGPIO0 determines boot mode</text>\n<text x=\"246.38\" y=\"5.08\" size=\"1.778\" layer=\"97\" font=\"vector\">If DTR is LOW, toggling RTS from \nHIGH to LOW resets to run mode.\nIf RTS is HIGH, toggling DTR from \nLOW to HIGH resets to bootloader.</text>\n<text x=\"246.38\" y=\"165.1\" size=\"2.032\" layer=\"97\">Charge current:\nI_CHG = 1000 / R_PROG\n1000 / 4kOhm = 256mA</text>\n<text x=\"5.08\" y=\"157.48\" size=\"2.54\" layer=\"94\" align=\"top-left\">Power Supply</text>\n<text x=\"5.08\" y=\"236.22\" size=\"2.54\" layer=\"94\" align=\"top-left\">FTDI Adapter</text>\n<wire x1=\"317.5\" y1=\"93.98\" x2=\"381\" y2=\"93.98\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"381\" y1=\"93.98\" x2=\"381\" y2=\"40.64\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"381\" y1=\"40.64\" x2=\"317.5\" y2=\"40.64\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"317.5\" y1=\"40.64\" x2=\"317.5\" y2=\"93.98\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"241.3\" y1=\"0\" x2=\"241.3\" y2=\"93.98\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"241.3\" y1=\"93.98\" x2=\"312.42\" y2=\"93.98\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"312.42\" y1=\"0\" x2=\"241.3\" y2=\"0\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"312.42\" y1=\"0\" x2=\"312.42\" y2=\"93.98\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"241.3\" y1=\"241.3\" x2=\"381\" y2=\"241.3\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"241.3\" y1=\"160.02\" x2=\"241.3\" y2=\"241.3\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"381\" y1=\"160.02\" x2=\"381\" y2=\"241.3\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"241.3\" y1=\"160.02\" x2=\"381\" y2=\"160.02\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"162.56\" x2=\"144.78\" y2=\"162.56\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"78.74\" x2=\"0\" y2=\"162.56\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"78.74\" x2=\"144.78\" y2=\"78.74\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"144.78\" y1=\"78.74\" x2=\"144.78\" y2=\"162.56\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"144.78\" y1=\"167.64\" x2=\"144.78\" y2=\"241.3\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"241.3\" x2=\"144.78\" y2=\"241.3\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"167.64\" x2=\"144.78\" y2=\"167.64\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"167.64\" x2=\"0\" y2=\"241.3\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"149.86\" y1=\"96.52\" x2=\"149.86\" y2=\"241.3\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"149.86\" y1=\"241.3\" x2=\"236.22\" y2=\"241.3\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"149.86\" y1=\"96.52\" x2=\"236.22\" y2=\"96.52\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"236.22\" y1=\"96.52\" x2=\"236.22\" y2=\"241.3\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"73.66\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"144.78\" y2=\"0\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"73.66\" x2=\"144.78\" y2=\"73.66\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"144.78\" y1=\"0\" x2=\"144.78\" y2=\"73.66\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"149.86\" y1=\"0\" x2=\"149.86\" y2=\"91.44\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"149.86\" y1=\"91.44\" x2=\"236.22\" y2=\"91.44\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"149.86\" y1=\"0\" x2=\"236.22\" y2=\"0\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"236.22\" y1=\"0\" x2=\"236.22\" y2=\"91.44\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<text x=\"246.38\" y=\"236.22\" size=\"2.54\" layer=\"94\" align=\"top-left\">LiPo Charger</text>\n<text x=\"154.94\" y=\"86.36\" size=\"2.54\" layer=\"94\" align=\"top-left\">Joystick and Buttons</text>\n<text x=\"5.08\" y=\"68.58\" size=\"2.54\" layer=\"94\" align=\"top-left\">5V Charge Pump for LCD</text>\n<text x=\"154.94\" y=\"99.06\" size=\"1.905\" layer=\"97\" font=\"vector\">RTC GPIOs: 0,2,4,12-15,25-27,32-39\nusable by ULP, internal Pullups /Pulldowns\next0 for one pin as wakeup source\next1 for multiple pins as wakeup source\n        only for GPIOs: 32-39?\n        no internal Pullups /Pulldowns\n</text>\n<text x=\"176.784\" y=\"175.514\" size=\"1.905\" layer=\"97\" font=\"vector\" rot=\"R90\">SPI Flash</text>\n<text x=\"363.22\" y=\"15.24\" size=\"2.032\" layer=\"97\" rot=\"R180\" align=\"top-left\">Low Power Handheld REV2\nMaximilian Kern\n02/2020</text>\n<text x=\"335.28\" y=\"165.1\" size=\"2.032\" layer=\"97\">                          STAT\nShutdown              - High Z \nNo Battery Present  - High Z \nConstant Voltage    - Low\nCharge Complete    - High</text>\n<text x=\"134.62\" y=\"154.94\" size=\"2.032\" layer=\"97\" rot=\"R180\">ADC_BAT for voltage sensing and as a \nwakeup source (R11 acts as pulldown)</text>\n<text x=\"50.8\" y=\"10.16\" size=\"2.032\" layer=\"97\">R_top = R_bot*(V_out/V_fb-1)</text>\n<text x=\"322.58\" y=\"88.9\" size=\"2.54\" layer=\"94\" align=\"top-left\">Sharp Display Connector</text>\n<wire x1=\"241.3\" y1=\"99.06\" x2=\"381\" y2=\"99.06\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"241.3\" y1=\"99.06\" x2=\"241.3\" y2=\"154.94\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"381\" y1=\"99.06\" x2=\"381\" y2=\"154.94\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"241.3\" y1=\"154.94\" x2=\"381\" y2=\"154.94\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<text x=\"246.38\" y=\"149.86\" size=\"2.54\" layer=\"94\" align=\"top-left\">MPU6050</text>\n<text x=\"114.3\" y=\"124.46\" size=\"2.032\" layer=\"97\">Alternative Regulator: \nXC6220B33\nwith C7=C8=10µF</text>\n<text x=\"12.7\" y=\"86.36\" size=\"2.032\" layer=\"97\">Automatic supply selection:\nP-MOSFET only conducts\nwhen V_USB is available</text>\n<text x=\"154.94\" y=\"5.08\" size=\"2.032\" layer=\"97\">Hardware pulldown necessary\nfor RTC interrupts</text>\n</plain>\n<instances>\n<instance part=\"S1\" gate=\"G$1\" x=\"205.74\" y=\"73.66\"/>\n<instance part=\"SW1\" gate=\"G$1\" x=\"182.88\" y=\"55.88\"/>\n<instance part=\"SW2\" gate=\"G$1\" x=\"182.88\" y=\"40.64\"/>\n<instance part=\"U2\" gate=\"G$1\" x=\"195.58\" y=\"172.72\"/>\n<instance part=\"R8\" gate=\"G$1\" x=\"167.64\" y=\"210.82\" rot=\"R90\"/>\n<instance part=\"C5\" gate=\"G$1\" x=\"226.06\" y=\"226.06\"/>\n<instance part=\"C3\" gate=\"G$1\" x=\"215.9\" y=\"226.06\"/>\n<instance part=\"C2\" gate=\"G$1\" x=\"170.18\" y=\"195.58\"/>\n<instance part=\"GND5\" gate=\"1\" x=\"175.26\" y=\"129.54\"/>\n<instance part=\"GND6\" gate=\"1\" x=\"170.18\" y=\"187.96\"/>\n<instance part=\"GND7\" gate=\"1\" x=\"215.9\" y=\"218.44\"/>\n<instance part=\"GND8\" gate=\"1\" x=\"226.06\" y=\"218.44\"/>\n<instance part=\"SUPPLY2\" gate=\"G$1\" x=\"172.72\" y=\"220.98\"/>\n<instance part=\"SUPPLY3\" gate=\"G$1\" x=\"215.9\" y=\"233.68\"/>\n<instance part=\"SUPPLY5\" gate=\"G$1\" x=\"226.06\" y=\"233.68\"/>\n<instance part=\"R17\" gate=\"G$1\" x=\"284.48\" y=\"48.26\" rot=\"R180\"/>\n<instance part=\"R18\" gate=\"G$1\" x=\"284.48\" y=\"30.48\" rot=\"R180\"/>\n<instance part=\"Q2\" gate=\"Q1\" x=\"274.32\" y=\"48.26\" rot=\"MR0\"/>\n<instance part=\"Q2\" gate=\"Q2\" x=\"274.32\" y=\"30.48\" rot=\"R180\"/>\n<instance part=\"U1\" gate=\"G$1\" x=\"317.5\" y=\"210.82\" rot=\"MR0\"/>\n<instance part=\"C6\" gate=\"G$1\" x=\"284.48\" y=\"208.28\" rot=\"MR0\"/>\n<instance part=\"JP2\" gate=\"G$1\" x=\"261.62\" y=\"213.36\"/>\n<instance part=\"R6\" gate=\"G$1\" x=\"297.18\" y=\"203.2\" rot=\"MR90\"/>\n<instance part=\"SUPPLY25\" gate=\"G$1\" x=\"274.32\" y=\"220.98\" smashed=\"yes\">\n<attribute name=\"VALUE\" x=\"273.304\" y=\"224.536\" size=\"1.778\" layer=\"96\"/>\n</instance>\n<instance part=\"C19\" gate=\"G$1\" x=\"350.52\" y=\"205.74\"/>\n<instance part=\"SUPPLY23\" gate=\"G$1\" x=\"350.52\" y=\"215.9\" rot=\"MR0\"/>\n<instance part=\"GND41\" gate=\"1\" x=\"350.52\" y=\"190.5\" rot=\"MR0\"/>\n<instance part=\"C11\" gate=\"G$1\" x=\"50.8\" y=\"200.66\" rot=\"MR0\"/>\n<instance part=\"GND27\" gate=\"1\" x=\"50.8\" y=\"190.5\"/>\n<instance part=\"GND26\" gate=\"1\" x=\"25.4\" y=\"185.42\"/>\n<instance part=\"C14\" gate=\"G$1\" x=\"86.36\" y=\"195.58\" rot=\"MR0\"/>\n<instance part=\"U4\" gate=\"U$1\" x=\"121.92\" y=\"205.74\"/>\n<instance part=\"R13\" gate=\"G$1\" x=\"78.74\" y=\"210.82\" smashed=\"yes\">\n<attribute name=\"NAME\" x=\"74.168\" y=\"212.3186\" size=\"1.778\" layer=\"95\"/>\n<attribute name=\"VALUE\" x=\"80.518\" y=\"212.344\" size=\"1.778\" layer=\"96\"/>\n</instance>\n<instance part=\"R14\" gate=\"G$1\" x=\"78.74\" y=\"208.28\" smashed=\"yes\">\n<attribute name=\"NAME\" x=\"78.994\" y=\"207.0354\" size=\"1.778\" layer=\"95\" rot=\"R180\"/>\n<attribute name=\"VALUE\" x=\"83.82\" y=\"207.01\" size=\"1.778\" layer=\"96\" rot=\"R180\"/>\n</instance>\n<instance part=\"C13\" gate=\"G$1\" x=\"66.04\" y=\"200.66\"/>\n<instance part=\"C12\" gate=\"G$1\" x=\"60.96\" y=\"200.66\" rot=\"MR0\"/>\n<instance part=\"GND29\" gate=\"1\" x=\"66.04\" y=\"190.5\"/>\n<instance part=\"GND28\" gate=\"1\" x=\"60.96\" y=\"190.5\"/>\n<instance part=\"C16\" gate=\"G$1\" x=\"101.6\" y=\"195.58\"/>\n<instance part=\"GND33\" gate=\"1\" x=\"106.68\" y=\"182.88\"/>\n<instance part=\"GND32\" gate=\"1\" x=\"101.6\" y=\"182.88\"/>\n<instance part=\"GND31\" gate=\"1\" x=\"96.52\" y=\"182.88\"/>\n<instance part=\"GND30\" gate=\"1\" x=\"86.36\" y=\"182.88\"/>\n<instance part=\"F1\" gate=\"G$1\" x=\"58.42\" y=\"220.98\"/>\n<instance part=\"C15\" gate=\"G$1\" x=\"96.52\" y=\"195.58\" rot=\"MR0\"/>\n<instance part=\"SUPPLY14\" gate=\"G$1\" x=\"71.12\" y=\"223.52\"/>\n<instance part=\"GND2\" gate=\"1\" x=\"91.44\" y=\"88.9\"/>\n<instance part=\"C7\" gate=\"G$1\" x=\"86.36\" y=\"104.14\" rot=\"MR0\"/>\n<instance part=\"GND21\" gate=\"1\" x=\"124.46\" y=\"88.9\"/>\n<instance part=\"GND3\" gate=\"1\" x=\"86.36\" y=\"88.9\"/>\n<instance part=\"D3\" gate=\"G$1\" x=\"35.56\" y=\"111.76\" smashed=\"yes\">\n<attribute name=\"NAME\" x=\"37.338\" y=\"115.3414\" size=\"1.778\" layer=\"95\" rot=\"R180\"/>\n<attribute name=\"VALUE\" x=\"40.132\" y=\"110.0074\" size=\"1.778\" layer=\"96\" rot=\"R180\"/>\n</instance>\n<instance part=\"R7\" gate=\"G$1\" x=\"25.4\" y=\"111.76\" rot=\"R90\"/>\n<instance part=\"GND13\" gate=\"1\" x=\"25.4\" y=\"101.6\"/>\n<instance part=\"Q1\" gate=\"G$1\" x=\"40.64\" y=\"119.38\" smashed=\"yes\">\n<attribute name=\"NAME\" x=\"43.18\" y=\"124.46\" size=\"1.778\" layer=\"95\"/>\n<attribute name=\"VALUE\" x=\"43.18\" y=\"121.92\" size=\"1.778\" layer=\"96\"/>\n</instance>\n<instance part=\"SUPPLY22\" gate=\"G$1\" x=\"17.78\" y=\"119.38\" smashed=\"yes\" rot=\"R90\">\n<attribute name=\"VALUE\" x=\"14.224\" y=\"118.364\" size=\"1.778\" layer=\"96\" rot=\"R90\"/>\n</instance>\n<instance part=\"SUPPLY27\" gate=\"G$1\" x=\"17.78\" y=\"139.7\" smashed=\"yes\" rot=\"R90\">\n<attribute name=\"VALUE\" x=\"14.224\" y=\"136.144\" size=\"1.778\" layer=\"96\" rot=\"R90\"/>\n</instance>\n<instance part=\"SUPPLY8\" gate=\"G$1\" x=\"119.38\" y=\"114.3\"/>\n<instance part=\"R10\" gate=\"G$1\" x=\"71.12\" y=\"137.16\" rot=\"MR0\"/>\n<instance part=\"R11\" gate=\"G$1\" x=\"93.98\" y=\"137.16\" rot=\"R180\"/>\n<instance part=\"GND16\" gate=\"1\" x=\"106.68\" y=\"124.46\"/>\n<instance part=\"S2\" gate=\"1\" x=\"25.4\" y=\"139.7\"/>\n<instance part=\"K1\" gate=\"G$1\" x=\"340.36\" y=\"63.5\" rot=\"MR0\"/>\n<instance part=\"GND10\" gate=\"1\" x=\"370.84\" y=\"48.26\"/>\n<instance part=\"R1\" gate=\"G$1\" x=\"71.12\" y=\"111.76\" rot=\"R180\"/>\n<instance part=\"C1\" gate=\"G$1\" x=\"33.02\" y=\"33.02\" rot=\"MR0\"/>\n<instance part=\"C8\" gate=\"G$1\" x=\"111.76\" y=\"35.56\" rot=\"MR180\"/>\n<instance part=\"GND1\" gate=\"1\" x=\"38.1\" y=\"12.7\" rot=\"MR0\"/>\n<instance part=\"GND14\" gate=\"1\" x=\"190.5\" y=\"66.04\" rot=\"MR0\"/>\n<instance part=\"C4\" gate=\"G$1\" x=\"370.84\" y=\"58.42\"/>\n<instance part=\"C10\" gate=\"G$1\" x=\"124.46\" y=\"104.14\"/>\n<instance part=\"R2\" gate=\"G$1\" x=\"200.66\" y=\"48.26\" rot=\"MR90\"/>\n<instance part=\"R4\" gate=\"G$1\" x=\"205.74\" y=\"33.02\" rot=\"MR90\"/>\n<instance part=\"SUPPLY4\" gate=\"G$1\" x=\"160.02\" y=\"58.42\"/>\n<instance part=\"C9\" gate=\"G$1\" x=\"91.44\" y=\"129.54\" rot=\"R270\"/>\n<instance part=\"U$1\" gate=\"A\" x=\"86.36\" y=\"43.18\"/>\n<instance part=\"L1\" gate=\"G$1\" x=\"53.34\" y=\"43.18\"/>\n<instance part=\"R5\" gate=\"G$1\" x=\"73.66\" y=\"17.78\" rot=\"R180\"/>\n<instance part=\"R9\" gate=\"G$1\" x=\"53.34\" y=\"17.78\" rot=\"R180\"/>\n<instance part=\"GND15\" gate=\"1\" x=\"111.76\" y=\"15.24\" rot=\"MR0\"/>\n<instance part=\"GND17\" gate=\"1\" x=\"205.74\" y=\"5.08\" rot=\"MR0\"/>\n<instance part=\"GND4\" gate=\"1\" x=\"271.78\" y=\"190.5\" rot=\"MR0\"/>\n<instance part=\"J2\" gate=\"J1\" x=\"7.62\" y=\"205.74\" smashed=\"yes\">\n<attribute name=\"VALUE\" x=\"5.08\" y=\"193.294\" size=\"1.778\" layer=\"96\" font=\"vector\" rot=\"MR180\" align=\"top-left\"/>\n<attribute name=\"NAME\" x=\"5.08\" y=\"216.154\" size=\"1.778\" layer=\"95\" font=\"vector\"/>\n</instance>\n<instance part=\"U$2\" gate=\"G$1\" x=\"302.26\" y=\"127\"/>\n<instance part=\"R12\" gate=\"G$1\" x=\"330.2\" y=\"137.16\" rot=\"R270\"/>\n<instance part=\"R15\" gate=\"G$1\" x=\"340.36\" y=\"137.16\" rot=\"R270\"/>\n<instance part=\"C17\" gate=\"G$1\" x=\"330.2\" y=\"114.3\" rot=\"MR0\"/>\n<instance part=\"C18\" gate=\"G$1\" x=\"271.78\" y=\"114.3\"/>\n<instance part=\"C20\" gate=\"G$1\" x=\"261.62\" y=\"114.3\"/>\n<instance part=\"SW3\" gate=\"G$1\" x=\"182.88\" y=\"21.59\" rot=\"R270\"/>\n<instance part=\"GND11\" gate=\"1\" x=\"271.78\" y=\"106.68\"/>\n<instance part=\"GND12\" gate=\"1\" x=\"281.94\" y=\"106.68\"/>\n<instance part=\"GND18\" gate=\"1\" x=\"330.2\" y=\"106.68\"/>\n<instance part=\"SUPPLY1\" gate=\"G$1\" x=\"330.2\" y=\"144.78\"/>\n<instance part=\"SUPPLY6\" gate=\"G$1\" x=\"340.36\" y=\"144.78\"/>\n<instance part=\"SUPPLY7\" gate=\"G$1\" x=\"274.32\" y=\"144.78\"/>\n<instance part=\"C21\" gate=\"G$1\" x=\"360.68\" y=\"121.92\"/>\n<instance part=\"GND19\" gate=\"1\" x=\"360.68\" y=\"114.3\"/>\n<instance part=\"SUPPLY9\" gate=\"G$1\" x=\"360.68\" y=\"129.54\"/>\n<instance part=\"R16\" gate=\"G$1\" x=\"210.82\" y=\"17.78\" rot=\"MR270\"/>\n<instance part=\"GND20\" gate=\"1\" x=\"337.82\" y=\"106.68\"/>\n<instance part=\"GND22\" gate=\"1\" x=\"256.54\" y=\"104.14\"/>\n<instance part=\"SUPPLY10\" gate=\"G$1\" x=\"322.58\" y=\"144.78\"/>\n<instance part=\"U3\" gate=\"G$1\" x=\"104.14\" y=\"106.68\">\n<attribute name=\"PROD_ID\" x=\"104.14\" y=\"106.68\" size=\"1.778\" layer=\"96\" display=\"off\"/>\n</instance>\n<instance part=\"R3\" gate=\"G$1\" x=\"30.48\" y=\"195.58\" rot=\"R270\"/>\n<instance part=\"R19\" gate=\"G$1\" x=\"38.1\" y=\"195.58\" rot=\"R270\"/>\n<instance part=\"GND23\" gate=\"1\" x=\"30.48\" y=\"185.42\"/>\n<instance part=\"GND24\" gate=\"1\" x=\"38.1\" y=\"185.42\"/>\n</instances>\n<busses>\n</busses>\n<nets>\n<net name=\"GND\" class=\"0\">\n<segment>\n<wire x1=\"175.26\" y1=\"137.16\" x2=\"175.26\" y2=\"132.08\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"175.26\" y1=\"139.7\" x2=\"175.26\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"175.26\" y=\"137.16\"/>\n<wire x1=\"175.26\" y1=\"142.24\" x2=\"175.26\" y2=\"139.7\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"175.26\" y=\"139.7\"/>\n<wire x1=\"175.26\" y1=\"144.78\" x2=\"175.26\" y2=\"142.24\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"175.26\" y=\"142.24\"/>\n<pinref part=\"GND5\" gate=\"1\" pin=\"GND\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"GND\"/>\n<wire x1=\"175.26\" y1=\"137.16\" x2=\"177.8\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"GND@38\"/>\n<wire x1=\"177.8\" y1=\"139.7\" x2=\"175.26\" y2=\"139.7\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"GND@15\"/>\n<wire x1=\"175.26\" y1=\"142.24\" x2=\"177.8\" y2=\"142.24\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"GND@1\"/>\n<wire x1=\"177.8\" y1=\"144.78\" x2=\"175.26\" y2=\"144.78\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"C2\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"170.18\" y1=\"190.5\" x2=\"170.18\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND6\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"C3\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"215.9\" y1=\"220.98\" x2=\"215.9\" y2=\"223.52\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND7\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"C5\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"226.06\" y1=\"220.98\" x2=\"226.06\" y2=\"223.52\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND8\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"U1\" gate=\"G$1\" pin=\"VSS\"/>\n<wire x1=\"307.34\" y1=\"208.28\" x2=\"304.8\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"304.8\" y1=\"208.28\" x2=\"304.8\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R6\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"297.18\" y1=\"198.12\" x2=\"297.18\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"304.8\" y1=\"195.58\" x2=\"297.18\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"297.18\" y=\"195.58\"/>\n<pinref part=\"C6\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"284.48\" y1=\"195.58\" x2=\"284.48\" y2=\"205.74\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"297.18\" y1=\"195.58\" x2=\"284.48\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"284.48\" y=\"195.58\"/>\n<pinref part=\"JP2\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"269.24\" y1=\"213.36\" x2=\"271.78\" y2=\"213.36\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"271.78\" y1=\"213.36\" x2=\"271.78\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"284.48\" y1=\"195.58\" x2=\"271.78\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND4\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"271.78\" y1=\"193.04\" x2=\"271.78\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"271.78\" y=\"195.58\"/>\n</segment>\n<segment>\n<pinref part=\"C19\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND41\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"350.52\" y1=\"193.04\" x2=\"350.52\" y2=\"203.2\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<wire x1=\"50.8\" y1=\"193.04\" x2=\"50.8\" y2=\"198.12\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C11\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND27\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"GND26\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"25.4\" y1=\"200.66\" x2=\"25.4\" y2=\"198.12\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"25.4\" y1=\"198.12\" x2=\"25.4\" y2=\"187.96\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"25.4\" y1=\"200.66\" x2=\"20.32\" y2=\"200.66\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"J2\" gate=\"J1\" pin=\"GND\"/>\n<wire x1=\"20.32\" y1=\"198.12\" x2=\"25.4\" y2=\"198.12\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"25.4\" y=\"198.12\"/>\n<pinref part=\"J2\" gate=\"J1\" pin=\"SHLD\"/>\n</segment>\n<segment>\n<pinref part=\"C13\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND29\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"66.04\" y1=\"193.04\" x2=\"66.04\" y2=\"198.12\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"C12\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND28\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"60.96\" y1=\"193.04\" x2=\"60.96\" y2=\"198.12\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"GND@16\"/>\n<pinref part=\"GND33\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"109.22\" y1=\"190.5\" x2=\"106.68\" y2=\"190.5\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"106.68\" y1=\"190.5\" x2=\"106.68\" y2=\"185.42\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"GND@6\"/>\n<wire x1=\"109.22\" y1=\"193.04\" x2=\"106.68\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"106.68\" y1=\"193.04\" x2=\"106.68\" y2=\"190.5\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"106.68\" y=\"190.5\"/>\n</segment>\n<segment>\n<pinref part=\"C16\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND32\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"101.6\" y1=\"185.42\" x2=\"101.6\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"GND31\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"96.52\" y1=\"185.42\" x2=\"96.52\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C15\" gate=\"G$1\" pin=\"2\"/>\n</segment>\n<segment>\n<pinref part=\"C14\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND30\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"86.36\" y1=\"185.42\" x2=\"86.36\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"GND21\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"124.46\" y1=\"91.44\" x2=\"124.46\" y2=\"101.6\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C10\" gate=\"G$1\" pin=\"2\"/>\n</segment>\n<segment>\n<pinref part=\"C7\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND3\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"86.36\" y1=\"101.6\" x2=\"86.36\" y2=\"91.44\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"R7\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"GND13\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"25.4\" y1=\"104.14\" x2=\"25.4\" y2=\"106.68\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"R11\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"GND16\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"99.06\" y1=\"137.16\" x2=\"106.68\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"106.68\" y1=\"137.16\" x2=\"106.68\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C9\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"106.68\" y1=\"129.54\" x2=\"106.68\" y2=\"127\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"96.52\" y1=\"129.54\" x2=\"106.68\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"106.68\" y=\"129.54\"/>\n</segment>\n<segment>\n<pinref part=\"GND10\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"370.84\" y1=\"50.8\" x2=\"370.84\" y2=\"53.34\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"370.84\" y1=\"53.34\" x2=\"370.84\" y2=\"55.88\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"10\"/>\n<wire x1=\"370.84\" y1=\"53.34\" x2=\"350.52\" y2=\"53.34\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"370.84\" y=\"53.34\"/>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"9\"/>\n<wire x1=\"350.52\" y1=\"53.34\" x2=\"345.44\" y2=\"53.34\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"350.52\" y1=\"55.88\" x2=\"345.44\" y2=\"55.88\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"350.52\" y1=\"55.88\" x2=\"350.52\" y2=\"53.34\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"350.52\" y=\"53.34\"/>\n<pinref part=\"C4\" gate=\"G$1\" pin=\"2\"/>\n</segment>\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"GND\"/>\n<wire x1=\"193.04\" y1=\"71.12\" x2=\"190.5\" y2=\"71.12\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"190.5\" y1=\"71.12\" x2=\"190.5\" y2=\"68.58\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND14\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"GND2\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"91.44\" y1=\"101.6\" x2=\"91.44\" y2=\"91.44\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"91.44\" y1=\"101.6\" x2=\"93.98\" y2=\"101.6\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U3\" gate=\"G$1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"U$1\" gate=\"A\" pin=\"GND\"/>\n<wire x1=\"68.58\" y1=\"33.02\" x2=\"38.1\" y2=\"33.02\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"38.1\" y1=\"33.02\" x2=\"38.1\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND1\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"38.1\" y1=\"17.78\" x2=\"38.1\" y2=\"15.24\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"38.1\" y=\"17.78\"/>\n<pinref part=\"C1\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"38.1\" y1=\"17.78\" x2=\"33.02\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"33.02\" y1=\"17.78\" x2=\"33.02\" y2=\"30.48\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R9\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"48.26\" y1=\"17.78\" x2=\"38.1\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"C8\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"111.76\" y1=\"30.48\" x2=\"111.76\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND15\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"C18\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"271.78\" y1=\"111.76\" x2=\"271.78\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND11\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"U$2\" gate=\"G$1\" pin=\"GND\"/>\n<wire x1=\"284.48\" y1=\"119.38\" x2=\"281.94\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"281.94\" y1=\"119.38\" x2=\"281.94\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND12\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"C17\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"330.2\" y1=\"111.76\" x2=\"330.2\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND18\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"C21\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"360.68\" y1=\"116.84\" x2=\"360.68\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND19\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"R2\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"200.66\" y1=\"43.18\" x2=\"200.66\" y2=\"10.16\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"200.66\" y1=\"10.16\" x2=\"205.74\" y2=\"10.16\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R16\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"205.74\" y1=\"10.16\" x2=\"210.82\" y2=\"10.16\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"210.82\" y1=\"10.16\" x2=\"210.82\" y2=\"12.7\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R4\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"205.74\" y1=\"27.94\" x2=\"205.74\" y2=\"10.16\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"205.74\" y=\"10.16\"/>\n<pinref part=\"GND17\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"205.74\" y1=\"10.16\" x2=\"205.74\" y2=\"7.62\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U$2\" gate=\"G$1\" pin=\"AD0\"/>\n<pinref part=\"GND20\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"320.04\" y1=\"124.46\" x2=\"337.82\" y2=\"124.46\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"337.82\" y1=\"124.46\" x2=\"337.82\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U$2\" gate=\"G$1\" pin=\"CLKIN\"/>\n<pinref part=\"GND22\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"284.48\" y1=\"127\" x2=\"256.54\" y2=\"127\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"256.54\" y1=\"127\" x2=\"256.54\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U$2\" gate=\"G$1\" pin=\"FSYNC\"/>\n<wire x1=\"256.54\" y1=\"109.22\" x2=\"256.54\" y2=\"106.68\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"284.48\" y1=\"129.54\" x2=\"251.46\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"251.46\" y1=\"129.54\" x2=\"251.46\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"251.46\" y1=\"109.22\" x2=\"256.54\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"256.54\" y=\"109.22\"/>\n<pinref part=\"C20\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"261.62\" y1=\"111.76\" x2=\"261.62\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"261.62\" y1=\"109.22\" x2=\"256.54\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"R19\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND24\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"38.1\" y1=\"187.96\" x2=\"38.1\" y2=\"190.5\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"R3\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND23\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"30.48\" y1=\"187.96\" x2=\"30.48\" y2=\"190.5\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"3.3V\" class=\"0\">\n<segment>\n<wire x1=\"172.72\" y1=\"205.74\" x2=\"172.72\" y2=\"218.44\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R8\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"172.72\" y1=\"218.44\" x2=\"172.72\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"167.64\" y1=\"215.9\" x2=\"167.64\" y2=\"218.44\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"167.64\" y1=\"218.44\" x2=\"172.72\" y2=\"218.44\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"172.72\" y=\"218.44\"/>\n<pinref part=\"SUPPLY2\" gate=\"G$1\" pin=\"3.3V\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"3V3\"/>\n<wire x1=\"177.8\" y1=\"205.74\" x2=\"172.72\" y2=\"205.74\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"C3\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"215.9\" y1=\"233.68\" x2=\"215.9\" y2=\"231.14\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY3\" gate=\"G$1\" pin=\"3.3V\"/>\n</segment>\n<segment>\n<pinref part=\"C5\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"226.06\" y1=\"233.68\" x2=\"226.06\" y2=\"231.14\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY5\" gate=\"G$1\" pin=\"3.3V\"/>\n</segment>\n<segment>\n<wire x1=\"111.76\" y1=\"111.76\" x2=\"119.38\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"119.38\" y1=\"111.76\" x2=\"124.46\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"124.46\" y1=\"111.76\" x2=\"124.46\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY8\" gate=\"G$1\" pin=\"3.3V\"/>\n<wire x1=\"119.38\" y1=\"111.76\" x2=\"119.38\" y2=\"114.3\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"119.38\" y=\"111.76\"/>\n<pinref part=\"C10\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"U3\" gate=\"G$1\" pin=\"OUT\"/>\n</segment>\n<segment>\n<label x=\"12.7\" y=\"48.26\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n<pinref part=\"U$1\" gate=\"A\" pin=\"VIN\"/>\n<wire x1=\"68.58\" y1=\"48.26\" x2=\"63.5\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"63.5\" y1=\"48.26\" x2=\"43.18\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"43.18\" y1=\"48.26\" x2=\"33.02\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U$1\" gate=\"A\" pin=\"EN\"/>\n<wire x1=\"68.58\" y1=\"40.64\" x2=\"63.5\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"63.5\" y1=\"40.64\" x2=\"63.5\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"63.5\" y=\"48.26\"/>\n<pinref part=\"L1\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"45.72\" y1=\"43.18\" x2=\"43.18\" y2=\"43.18\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"43.18\" y1=\"43.18\" x2=\"43.18\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"43.18\" y=\"48.26\"/>\n<pinref part=\"C1\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"33.02\" y1=\"38.1\" x2=\"33.02\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"33.02\" y=\"48.26\"/>\n<wire x1=\"12.7\" y1=\"48.26\" x2=\"33.02\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"SW1\" gate=\"G$1\" pin=\"P\"/>\n<wire x1=\"177.8\" y1=\"55.88\" x2=\"170.18\" y2=\"55.88\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"170.18\" y1=\"55.88\" x2=\"170.18\" y2=\"53.34\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SW1\" gate=\"G$1\" pin=\"P1\"/>\n<wire x1=\"170.18\" y1=\"53.34\" x2=\"177.8\" y2=\"53.34\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"170.18\" y1=\"53.34\" x2=\"170.18\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"170.18\" y=\"53.34\"/>\n<pinref part=\"SW2\" gate=\"G$1\" pin=\"P\"/>\n<wire x1=\"170.18\" y1=\"40.64\" x2=\"177.8\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"170.18\" y1=\"40.64\" x2=\"170.18\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"170.18\" y=\"40.64\"/>\n<pinref part=\"SW2\" gate=\"G$1\" pin=\"P1\"/>\n<wire x1=\"170.18\" y1=\"38.1\" x2=\"177.8\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY4\" gate=\"G$1\" pin=\"3.3V\"/>\n<wire x1=\"170.18\" y1=\"55.88\" x2=\"160.02\" y2=\"55.88\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"160.02\" y1=\"55.88\" x2=\"160.02\" y2=\"58.42\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"170.18\" y=\"55.88\"/>\n<wire x1=\"170.18\" y1=\"17.78\" x2=\"170.18\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"170.18\" y=\"38.1\"/>\n<pinref part=\"SW3\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"170.18\" y1=\"25.4\" x2=\"170.18\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"170.18\" y1=\"17.78\" x2=\"180.34\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SW3\" gate=\"G$1\" pin=\"4\"/>\n<wire x1=\"180.34\" y1=\"25.4\" x2=\"170.18\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"170.18\" y=\"25.4\"/>\n</segment>\n<segment>\n<pinref part=\"R12\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"330.2\" y1=\"142.24\" x2=\"330.2\" y2=\"144.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY1\" gate=\"G$1\" pin=\"3.3V\"/>\n</segment>\n<segment>\n<pinref part=\"R15\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"340.36\" y1=\"142.24\" x2=\"340.36\" y2=\"144.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY6\" gate=\"G$1\" pin=\"3.3V\"/>\n</segment>\n<segment>\n<pinref part=\"U$2\" gate=\"G$1\" pin=\"VDD\"/>\n<wire x1=\"284.48\" y1=\"134.62\" x2=\"274.32\" y2=\"134.62\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"274.32\" y1=\"134.62\" x2=\"274.32\" y2=\"144.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY7\" gate=\"G$1\" pin=\"3.3V\"/>\n</segment>\n<segment>\n<pinref part=\"C21\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"360.68\" y1=\"129.54\" x2=\"360.68\" y2=\"127\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY9\" gate=\"G$1\" pin=\"3.3V\"/>\n</segment>\n<segment>\n<pinref part=\"U$2\" gate=\"G$1\" pin=\"VLOGIC\"/>\n<wire x1=\"320.04\" y1=\"121.92\" x2=\"322.58\" y2=\"121.92\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"322.58\" y1=\"121.92\" x2=\"330.2\" y2=\"121.92\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"330.2\" y1=\"121.92\" x2=\"330.2\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C17\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"SUPPLY10\" gate=\"G$1\" pin=\"3.3V\"/>\n<wire x1=\"322.58\" y1=\"144.78\" x2=\"322.58\" y2=\"121.92\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"322.58\" y=\"121.92\"/>\n</segment>\n</net>\n<net name=\"RESET\" class=\"0\">\n<segment>\n<pinref part=\"R8\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"170.18\" y1=\"203.2\" x2=\"167.64\" y2=\"203.2\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"167.64\" y1=\"203.2\" x2=\"167.64\" y2=\"205.74\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"167.64\" y1=\"203.2\" x2=\"165.1\" y2=\"203.2\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"167.64\" y=\"203.2\"/>\n<label x=\"165.1\" y=\"203.2\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n<pinref part=\"C2\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"170.18\" y1=\"200.66\" x2=\"170.18\" y2=\"203.2\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"170.18\" y=\"203.2\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"EN\"/>\n<wire x1=\"170.18\" y1=\"203.2\" x2=\"177.8\" y2=\"203.2\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<wire x1=\"271.78\" y1=\"53.34\" x2=\"271.78\" y2=\"55.88\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"271.78\" y1=\"55.88\" x2=\"269.24\" y2=\"55.88\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"269.24\" y=\"55.88\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n<pinref part=\"Q2\" gate=\"Q1\" pin=\"C\"/>\n</segment>\n</net>\n<net name=\"ADC_BAT\" class=\"0\">\n<segment>\n<pinref part=\"R10\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"R11\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"76.2\" y1=\"137.16\" x2=\"81.28\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"81.28\" y1=\"137.16\" x2=\"88.9\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"81.28\" y1=\"137.16\" x2=\"81.28\" y2=\"147.32\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"81.28\" y=\"137.16\"/>\n<label x=\"81.28\" y=\"147.32\" size=\"1.778\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n<pinref part=\"C9\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"88.9\" y1=\"129.54\" x2=\"81.28\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"81.28\" y1=\"129.54\" x2=\"81.28\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"SENSOR_VN/I39\"/>\n<wire x1=\"213.36\" y1=\"137.16\" x2=\"218.44\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"137.16\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"TXD\" class=\"0\">\n<segment>\n<label x=\"137.16\" y=\"218.44\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"RXD\"/>\n<wire x1=\"134.62\" y1=\"218.44\" x2=\"137.16\" y2=\"218.44\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"TXD\"/>\n<wire x1=\"213.36\" y1=\"205.74\" x2=\"218.44\" y2=\"205.74\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"205.74\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"RXD\" class=\"0\">\n<segment>\n<label x=\"137.16\" y=\"220.98\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"TXD\"/>\n<wire x1=\"134.62\" y1=\"220.98\" x2=\"137.16\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"RXD\"/>\n<wire x1=\"213.36\" y1=\"203.2\" x2=\"218.44\" y2=\"203.2\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"203.2\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"IO0\" class=\"0\">\n<segment>\n<wire x1=\"271.78\" y1=\"22.86\" x2=\"269.24\" y2=\"22.86\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"269.24\" y=\"22.86\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n<pinref part=\"Q2\" gate=\"Q2\" pin=\"C\"/>\n<wire x1=\"271.78\" y1=\"22.86\" x2=\"271.78\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO0\"/>\n<wire x1=\"213.36\" y1=\"198.12\" x2=\"218.44\" y2=\"198.12\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"198.12\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"DTR\" class=\"0\">\n<segment>\n<pinref part=\"R17\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"289.56\" y1=\"48.26\" x2=\"294.64\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"297.18\" y=\"48.26\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<wire x1=\"294.64\" y1=\"48.26\" x2=\"297.18\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"271.78\" y1=\"35.56\" x2=\"271.78\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"271.78\" y1=\"38.1\" x2=\"294.64\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"294.64\" y1=\"38.1\" x2=\"294.64\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"294.64\" y=\"48.26\"/>\n<pinref part=\"Q2\" gate=\"Q2\" pin=\"E\"/>\n</segment>\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"!DTR\"/>\n<wire x1=\"134.62\" y1=\"208.28\" x2=\"137.16\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"137.16\" y=\"208.28\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"RTS\" class=\"0\">\n<segment>\n<pinref part=\"R18\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"289.56\" y1=\"30.48\" x2=\"292.1\" y2=\"30.48\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"294.64\" y=\"30.48\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<wire x1=\"292.1\" y1=\"30.48\" x2=\"294.64\" y2=\"30.48\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"292.1\" y1=\"30.48\" x2=\"292.1\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"292.1\" y=\"30.48\"/>\n<wire x1=\"292.1\" y1=\"40.64\" x2=\"271.78\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"271.78\" y1=\"40.64\" x2=\"271.78\" y2=\"43.18\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"Q2\" gate=\"Q1\" pin=\"E\"/>\n</segment>\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"!RTS\"/>\n<wire x1=\"134.62\" y1=\"213.36\" x2=\"137.16\" y2=\"213.36\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"137.16\" y=\"213.36\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"N$10\" class=\"0\">\n<segment>\n<pinref part=\"R17\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"279.4\" y1=\"48.26\" x2=\"276.86\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"Q2\" gate=\"Q1\" pin=\"B\"/>\n</segment>\n</net>\n<net name=\"N$12\" class=\"0\">\n<segment>\n<pinref part=\"R18\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"279.4\" y1=\"30.48\" x2=\"276.86\" y2=\"30.48\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"Q2\" gate=\"Q2\" pin=\"B\"/>\n</segment>\n</net>\n<net name=\"V_USB\" class=\"0\">\n<segment>\n<pinref part=\"U1\" gate=\"G$1\" pin=\"VIN\"/>\n<wire x1=\"327.66\" y1=\"213.36\" x2=\"350.52\" y2=\"213.36\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY23\" gate=\"G$1\" pin=\"V_USB\"/>\n<wire x1=\"350.52\" y1=\"213.36\" x2=\"350.52\" y2=\"215.9\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C19\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"350.52\" y1=\"213.36\" x2=\"350.52\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"350.52\" y=\"213.36\"/>\n</segment>\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"VCC\"/>\n<wire x1=\"66.04\" y1=\"220.98\" x2=\"71.12\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"71.12\" y1=\"220.98\" x2=\"86.36\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"86.36\" y1=\"220.98\" x2=\"96.52\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"96.52\" y1=\"220.98\" x2=\"109.22\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"96.52\" y1=\"200.66\" x2=\"96.52\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"96.52\" y=\"220.98\"/>\n<pinref part=\"C14\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"86.36\" y1=\"200.66\" x2=\"86.36\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"86.36\" y=\"220.98\"/>\n<wire x1=\"71.12\" y1=\"220.98\" x2=\"71.12\" y2=\"223.52\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"71.12\" y=\"220.98\"/>\n<pinref part=\"F1\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"C15\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"SUPPLY14\" gate=\"G$1\" pin=\"V_USB\"/>\n</segment>\n<segment>\n<wire x1=\"33.02\" y1=\"119.38\" x2=\"30.48\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"30.48\" y1=\"119.38\" x2=\"25.4\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"30.48\" y1=\"119.38\" x2=\"30.48\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"30.48\" y=\"119.38\"/>\n<pinref part=\"D3\" gate=\"G$1\" pin=\"A\"/>\n<wire x1=\"30.48\" y1=\"111.76\" x2=\"33.02\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R7\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"25.4\" y1=\"116.84\" x2=\"25.4\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"25.4\" y=\"119.38\"/>\n<pinref part=\"Q1\" gate=\"G$1\" pin=\"G\"/>\n<pinref part=\"SUPPLY22\" gate=\"G$1\" pin=\"V_USB\"/>\n<wire x1=\"17.78\" y1=\"119.38\" x2=\"25.4\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"V_BATT\" class=\"0\">\n<segment>\n<pinref part=\"SUPPLY25\" gate=\"G$1\" pin=\"V_BATT\"/>\n<wire x1=\"274.32\" y1=\"215.9\" x2=\"274.32\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"JP2\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"269.24\" y1=\"215.9\" x2=\"274.32\" y2=\"215.9\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C6\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"284.48\" y1=\"213.36\" x2=\"284.48\" y2=\"215.9\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U1\" gate=\"G$1\" pin=\"VBAT\"/>\n<wire x1=\"304.8\" y1=\"213.36\" x2=\"307.34\" y2=\"213.36\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"304.8\" y1=\"213.36\" x2=\"304.8\" y2=\"215.9\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"284.48\" y1=\"215.9\" x2=\"304.8\" y2=\"215.9\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"274.32\" y1=\"215.9\" x2=\"284.48\" y2=\"215.9\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"274.32\" y=\"215.9\"/>\n<junction x=\"284.48\" y=\"215.9\"/>\n</segment>\n<segment>\n<pinref part=\"SUPPLY27\" gate=\"G$1\" pin=\"V_BATT\"/>\n<pinref part=\"S2\" gate=\"1\" pin=\"P\"/>\n<wire x1=\"17.78\" y1=\"139.7\" x2=\"20.32\" y2=\"139.7\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"20.32\" y1=\"139.7\" x2=\"22.86\" y2=\"139.7\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"20.32\" y1=\"139.7\" x2=\"20.32\" y2=\"144.78\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"20.32\" y=\"139.7\"/>\n<wire x1=\"20.32\" y1=\"144.78\" x2=\"33.02\" y2=\"144.78\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"33.02\" y1=\"144.78\" x2=\"33.02\" y2=\"142.24\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"S2\" gate=\"1\" pin=\"O\"/>\n<wire x1=\"33.02\" y1=\"142.24\" x2=\"30.48\" y2=\"142.24\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"N$16\" class=\"0\">\n<segment>\n<pinref part=\"R6\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"U1\" gate=\"G$1\" pin=\"PROG\"/>\n<wire x1=\"307.34\" y1=\"210.82\" x2=\"297.18\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"297.18\" y1=\"208.28\" x2=\"297.18\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"D-\" class=\"0\">\n<segment>\n<label x=\"55.88\" y=\"210.82\" size=\"1.778\" layer=\"95\" rot=\"MR0\"/>\n<wire x1=\"60.96\" y1=\"210.82\" x2=\"43.18\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R13\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"C12\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"73.66\" y1=\"210.82\" x2=\"60.96\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"60.96\" y1=\"210.82\" x2=\"60.96\" y2=\"205.74\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"60.96\" y=\"210.82\"/>\n<pinref part=\"J2\" gate=\"J1\" pin=\"D-\"/>\n<wire x1=\"20.32\" y1=\"208.28\" x2=\"38.1\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"38.1\" y1=\"208.28\" x2=\"43.18\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"D+\" class=\"0\">\n<segment>\n<label x=\"55.88\" y=\"208.28\" size=\"1.778\" layer=\"95\" rot=\"MR0\"/>\n<wire x1=\"66.04\" y1=\"208.28\" x2=\"43.18\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R14\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"C13\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"73.66\" y1=\"208.28\" x2=\"66.04\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"66.04\" y1=\"208.28\" x2=\"66.04\" y2=\"205.74\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"66.04\" y=\"208.28\"/>\n<pinref part=\"J2\" gate=\"J1\" pin=\"D+\"/>\n<wire x1=\"20.32\" y1=\"210.82\" x2=\"38.1\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"38.1\" y1=\"210.82\" x2=\"43.18\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"VUSB-RAW\" class=\"0\">\n<segment>\n<wire x1=\"33.02\" y1=\"213.36\" x2=\"33.02\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"33.02\" y1=\"220.98\" x2=\"50.8\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C11\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"50.8\" y1=\"220.98\" x2=\"53.34\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"50.8\" y1=\"205.74\" x2=\"50.8\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"50.8\" y=\"220.98\"/>\n<wire x1=\"33.02\" y1=\"213.36\" x2=\"20.32\" y2=\"213.36\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"F1\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"33.02\" y1=\"220.98\" x2=\"27.94\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"33.02\" y=\"220.98\"/>\n<label x=\"27.94\" y=\"220.98\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n<pinref part=\"J2\" gate=\"J1\" pin=\"VBUS\"/>\n</segment>\n</net>\n<net name=\"N$7\" class=\"0\">\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"USBDM\"/>\n<pinref part=\"R13\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"109.22\" y1=\"210.82\" x2=\"83.82\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"N$8\" class=\"0\">\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"USBDP\"/>\n<pinref part=\"R14\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"109.22\" y1=\"208.28\" x2=\"83.82\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"3.3V_F\" class=\"0\">\n<segment>\n<pinref part=\"C16\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"101.6\" y1=\"200.66\" x2=\"101.6\" y2=\"203.2\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"!RESET\"/>\n<wire x1=\"101.6\" y1=\"203.2\" x2=\"109.22\" y2=\"203.2\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"101.6\" y1=\"203.2\" x2=\"101.6\" y2=\"215.9\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"101.6\" y=\"203.2\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"3V3OUT\"/>\n<wire x1=\"101.6\" y1=\"215.9\" x2=\"109.22\" y2=\"215.9\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"101.6\" y1=\"215.9\" x2=\"101.6\" y2=\"218.44\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"101.6\" y=\"215.9\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"VCCIO\"/>\n<wire x1=\"101.6\" y1=\"218.44\" x2=\"109.22\" y2=\"218.44\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"101.6\" y=\"218.44\" size=\"1.778\" layer=\"95\"/>\n</segment>\n</net>\n<net name=\"N$4\" class=\"0\">\n<segment>\n<pinref part=\"Q1\" gate=\"G$1\" pin=\"D\"/>\n<wire x1=\"40.64\" y1=\"137.16\" x2=\"40.64\" y2=\"124.46\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"40.64\" y1=\"137.16\" x2=\"30.48\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"S2\" gate=\"1\" pin=\"S\"/>\n</segment>\n</net>\n<net name=\"SHARP_SCK\" class=\"0\">\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"345.44\" y1=\"76.2\" x2=\"350.52\" y2=\"76.2\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"350.52\" y=\"76.2\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<label x=\"218.44\" y=\"182.88\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"SCK_H/IO14\"/>\n<wire x1=\"218.44\" y1=\"182.88\" x2=\"213.36\" y2=\"182.88\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"SHARP_CS\" class=\"0\">\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"3\"/>\n<wire x1=\"345.44\" y1=\"71.12\" x2=\"350.52\" y2=\"71.12\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"350.52\" y=\"71.12\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"CS0_H/IO15\"/>\n<wire x1=\"213.36\" y1=\"180.34\" x2=\"218.44\" y2=\"180.34\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"180.34\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"SHARP_EXTMODE\" class=\"0\">\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"8\"/>\n<wire x1=\"345.44\" y1=\"58.42\" x2=\"350.52\" y2=\"58.42\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"350.52\" y=\"58.42\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO4\"/>\n<wire x1=\"213.36\" y1=\"193.04\" x2=\"218.44\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"193.04\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"CRG_STAT\" class=\"0\">\n<segment>\n<pinref part=\"U1\" gate=\"G$1\" pin=\"STAT\"/>\n<wire x1=\"327.66\" y1=\"208.28\" x2=\"330.2\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"330.2\" y=\"208.28\" size=\"1.778\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"SENSOR_VP/I36\"/>\n<wire x1=\"213.36\" y1=\"139.7\" x2=\"218.44\" y2=\"139.7\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"139.7\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"SHARP_MOSI\" class=\"0\">\n<segment>\n<label x=\"218.44\" y=\"185.42\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"MOSI_H/IO13\"/>\n<wire x1=\"218.44\" y1=\"185.42\" x2=\"213.36\" y2=\"185.42\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"345.44\" y1=\"73.66\" x2=\"350.52\" y2=\"73.66\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"350.52\" y=\"73.66\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"SHARP_VCOM\" class=\"0\">\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO2\"/>\n<wire x1=\"213.36\" y1=\"195.58\" x2=\"218.44\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"195.58\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"4\"/>\n<wire x1=\"345.44\" y1=\"68.58\" x2=\"350.52\" y2=\"68.58\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"350.52\" y=\"68.58\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"5V\" class=\"0\">\n<segment>\n<label x=\"116.84\" y=\"48.26\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"U$1\" gate=\"A\" pin=\"VOUT\"/>\n<wire x1=\"104.14\" y1=\"48.26\" x2=\"106.68\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"106.68\" y1=\"48.26\" x2=\"111.76\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"111.76\" y1=\"48.26\" x2=\"116.84\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C8\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"111.76\" y1=\"38.1\" x2=\"111.76\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"111.76\" y=\"48.26\"/>\n<pinref part=\"R5\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"78.74\" y1=\"17.78\" x2=\"106.68\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"106.68\" y1=\"17.78\" x2=\"106.68\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"106.68\" y=\"48.26\"/>\n</segment>\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"6\"/>\n<wire x1=\"345.44\" y1=\"63.5\" x2=\"350.52\" y2=\"63.5\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"7\"/>\n<wire x1=\"350.52\" y1=\"63.5\" x2=\"370.84\" y2=\"63.5\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"345.44\" y1=\"60.96\" x2=\"350.52\" y2=\"60.96\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"350.52\" y1=\"60.96\" x2=\"350.52\" y2=\"63.5\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"350.52\" y=\"63.5\"/>\n<wire x1=\"370.84\" y1=\"63.5\" x2=\"370.84\" y2=\"71.12\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"5\"/>\n<wire x1=\"345.44\" y1=\"66.04\" x2=\"350.52\" y2=\"66.04\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"350.52\" y1=\"66.04\" x2=\"350.52\" y2=\"63.5\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C4\" gate=\"G$1\" pin=\"1\"/>\n<junction x=\"370.84\" y=\"63.5\"/>\n<label x=\"370.84\" y=\"71.12\" size=\"1.27\" layer=\"95\" rot=\"R90\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_A\" class=\"0\">\n<segment>\n<pinref part=\"SW1\" gate=\"G$1\" pin=\"S1\"/>\n<wire x1=\"187.96\" y1=\"53.34\" x2=\"190.5\" y2=\"53.34\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SW1\" gate=\"G$1\" pin=\"S\"/>\n<wire x1=\"187.96\" y1=\"55.88\" x2=\"190.5\" y2=\"55.88\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"190.5\" y1=\"55.88\" x2=\"200.66\" y2=\"55.88\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"200.66\" y1=\"55.88\" x2=\"215.9\" y2=\"55.88\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"190.5\" y1=\"53.34\" x2=\"190.5\" y2=\"55.88\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"190.5\" y=\"55.88\"/>\n<label x=\"215.9\" y=\"55.88\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"R2\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"200.66\" y1=\"55.88\" x2=\"200.66\" y2=\"53.34\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"200.66\" y=\"55.88\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"XTAL_N/IO33\"/>\n<wire x1=\"213.36\" y1=\"147.32\" x2=\"218.44\" y2=\"147.32\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"147.32\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_B\" class=\"0\">\n<segment>\n<pinref part=\"SW2\" gate=\"G$1\" pin=\"S\"/>\n<wire x1=\"187.96\" y1=\"40.64\" x2=\"190.5\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SW2\" gate=\"G$1\" pin=\"S1\"/>\n<wire x1=\"190.5\" y1=\"40.64\" x2=\"205.74\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"205.74\" y1=\"40.64\" x2=\"215.9\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"187.96\" y1=\"38.1\" x2=\"190.5\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"190.5\" y1=\"38.1\" x2=\"190.5\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"190.5\" y=\"40.64\"/>\n<label x=\"215.9\" y=\"40.64\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"R4\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"205.74\" y1=\"40.64\" x2=\"205.74\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"205.74\" y=\"40.64\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"XTAL_P/IO32\"/>\n<wire x1=\"213.36\" y1=\"149.86\" x2=\"218.44\" y2=\"149.86\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"149.86\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_CENT\" class=\"0\">\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"CENT\"/>\n<wire x1=\"218.44\" y1=\"71.12\" x2=\"220.98\" y2=\"71.12\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"220.98\" y=\"71.12\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO21\"/>\n<wire x1=\"213.36\" y1=\"165.1\" x2=\"218.44\" y2=\"165.1\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"165.1\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_RIGHT\" class=\"0\">\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"RIGHT\"/>\n<wire x1=\"218.44\" y1=\"73.66\" x2=\"220.98\" y2=\"73.66\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"220.98\" y=\"73.66\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"SCK_V/IO18\"/>\n<wire x1=\"213.36\" y1=\"172.72\" x2=\"218.44\" y2=\"172.72\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"172.72\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_LEFT\" class=\"0\">\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"LEFT\"/>\n<wire x1=\"218.44\" y1=\"76.2\" x2=\"220.98\" y2=\"76.2\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"220.98\" y=\"76.2\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO22\"/>\n<wire x1=\"213.36\" y1=\"162.56\" x2=\"218.44\" y2=\"162.56\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"162.56\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_DOWN\" class=\"0\">\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"DOWN\"/>\n<wire x1=\"193.04\" y1=\"73.66\" x2=\"190.5\" y2=\"73.66\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"190.5\" y=\"73.66\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"MOSI_V/IO23\"/>\n<wire x1=\"213.36\" y1=\"160.02\" x2=\"218.44\" y2=\"160.02\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"160.02\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_UP\" class=\"0\">\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"UP\"/>\n<wire x1=\"193.04\" y1=\"76.2\" x2=\"190.5\" y2=\"76.2\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"190.5\" y=\"76.2\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"MISO_V/IO19\"/>\n<wire x1=\"213.36\" y1=\"170.18\" x2=\"218.44\" y2=\"170.18\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"170.18\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"N$5\" class=\"0\">\n<segment>\n<pinref part=\"R1\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"Q1\" gate=\"G$1\" pin=\"S\"/>\n<wire x1=\"40.64\" y1=\"114.3\" x2=\"40.64\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"40.64\" y1=\"111.76\" x2=\"63.5\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"40.64\" y=\"111.76\"/>\n<pinref part=\"D3\" gate=\"G$1\" pin=\"C\"/>\n<wire x1=\"63.5\" y1=\"111.76\" x2=\"66.04\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"38.1\" y1=\"111.76\" x2=\"40.64\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R10\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"66.04\" y1=\"137.16\" x2=\"63.5\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"63.5\" y1=\"137.16\" x2=\"63.5\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"63.5\" y=\"111.76\"/>\n</segment>\n</net>\n<net name=\"N$2\" class=\"0\">\n<segment>\n<pinref part=\"U$1\" gate=\"A\" pin=\"SW\"/>\n<pinref part=\"L1\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"68.58\" y1=\"43.18\" x2=\"60.96\" y2=\"43.18\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"B_VFB\" class=\"0\">\n<segment>\n<pinref part=\"U$1\" gate=\"A\" pin=\"VFB\"/>\n<wire x1=\"63.5\" y1=\"38.1\" x2=\"68.58\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"63.5\" y1=\"38.1\" x2=\"63.5\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R9\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"63.5\" y1=\"17.78\" x2=\"58.42\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R5\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"63.5\" y1=\"17.78\" x2=\"68.58\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"63.5\" y=\"17.78\"/>\n</segment>\n</net>\n<net name=\"N$3\" class=\"0\">\n<segment>\n<wire x1=\"93.98\" y1=\"111.76\" x2=\"91.44\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C7\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"91.44\" y1=\"111.76\" x2=\"86.36\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"86.36\" y1=\"111.76\" x2=\"86.36\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"86.36\" y=\"111.76\"/>\n<wire x1=\"76.2\" y1=\"111.76\" x2=\"86.36\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"93.98\" y1=\"106.68\" x2=\"91.44\" y2=\"106.68\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"91.44\" y1=\"106.68\" x2=\"91.44\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"91.44\" y=\"111.76\"/>\n<pinref part=\"R1\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"U3\" gate=\"G$1\" pin=\"IN\"/>\n<pinref part=\"U3\" gate=\"G$1\" pin=\"EN\"/>\n</segment>\n</net>\n<net name=\"SCL\" class=\"0\">\n<segment>\n<pinref part=\"U$2\" gate=\"G$1\" pin=\"SCL\"/>\n<wire x1=\"320.04\" y1=\"129.54\" x2=\"330.2\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"342.9\" y=\"129.54\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"R12\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"330.2\" y1=\"129.54\" x2=\"342.9\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"330.2\" y1=\"132.08\" x2=\"330.2\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"330.2\" y=\"129.54\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO25\"/>\n<wire x1=\"213.36\" y1=\"157.48\" x2=\"218.44\" y2=\"157.48\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"157.48\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"SDA\" class=\"0\">\n<segment>\n<pinref part=\"U$2\" gate=\"G$1\" pin=\"SDA\"/>\n<wire x1=\"320.04\" y1=\"127\" x2=\"340.36\" y2=\"127\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R15\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"340.36\" y1=\"127\" x2=\"340.36\" y2=\"132.08\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"340.36\" y1=\"127\" x2=\"342.9\" y2=\"127\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"340.36\" y=\"127\"/>\n<label x=\"342.9\" y=\"127\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO26\"/>\n<wire x1=\"213.36\" y1=\"154.94\" x2=\"218.44\" y2=\"154.94\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"154.94\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"N$17\" class=\"0\">\n<segment>\n<pinref part=\"U$2\" gate=\"G$1\" pin=\"CPOUT\"/>\n<wire x1=\"284.48\" y1=\"121.92\" x2=\"271.78\" y2=\"121.92\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"271.78\" y1=\"121.92\" x2=\"271.78\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C18\" gate=\"G$1\" pin=\"1\"/>\n</segment>\n</net>\n<net name=\"N$18\" class=\"0\">\n<segment>\n<pinref part=\"U$2\" gate=\"G$1\" pin=\"REGOUT\"/>\n<wire x1=\"284.48\" y1=\"124.46\" x2=\"261.62\" y2=\"124.46\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"261.62\" y1=\"124.46\" x2=\"261.62\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C20\" gate=\"G$1\" pin=\"1\"/>\n</segment>\n</net>\n<net name=\"MPU_INT\" class=\"0\">\n<segment>\n<pinref part=\"U$2\" gate=\"G$1\" pin=\"INT\"/>\n<wire x1=\"284.48\" y1=\"132.08\" x2=\"274.32\" y2=\"132.08\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"274.32\" y=\"132.08\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO34\"/>\n<wire x1=\"213.36\" y1=\"144.78\" x2=\"218.44\" y2=\"144.78\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"144.78\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_S\" class=\"0\">\n<segment>\n<wire x1=\"195.58\" y1=\"25.4\" x2=\"195.58\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"195.58\" y1=\"25.4\" x2=\"210.82\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R16\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"210.82\" y1=\"25.4\" x2=\"215.9\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"210.82\" y1=\"22.86\" x2=\"210.82\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"210.82\" y=\"25.4\"/>\n<label x=\"215.9\" y=\"25.4\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"SW3\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"185.42\" y1=\"17.78\" x2=\"195.58\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SW3\" gate=\"G$1\" pin=\"3\"/>\n<wire x1=\"185.42\" y1=\"25.4\" x2=\"195.58\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"195.58\" y=\"25.4\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO35\"/>\n<wire x1=\"213.36\" y1=\"142.24\" x2=\"218.44\" y2=\"142.24\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"218.44\" y=\"142.24\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"N$9\" class=\"0\">\n<segment>\n<pinref part=\"J2\" gate=\"J1\" pin=\"CC1\"/>\n<pinref part=\"R19\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"20.32\" y1=\"205.74\" x2=\"38.1\" y2=\"205.74\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"38.1\" y1=\"205.74\" x2=\"38.1\" y2=\"200.66\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"N$11\" class=\"0\">\n<segment>\n<pinref part=\"J2\" gate=\"J1\" pin=\"CC2\"/>\n<pinref part=\"R3\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"20.32\" y1=\"203.2\" x2=\"30.48\" y2=\"203.2\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"30.48\" y1=\"203.2\" x2=\"30.48\" y2=\"200.66\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n</nets>\n</sheet>\n</sheets>\n<errors>\n<approved hash=\"202,1,99.06,101.6,U3,BP,,,,\"/>\n</errors>\n</schematic>\n</drawing>\n<compatibility>\n<note version=\"6.3\" minversion=\"6.2.2\" severity=\"warning\">\nSince Version 6.2.2 text objects can contain more than one line,\nwhich will not be processed correctly with this version.\n</note>\n</compatibility>\n</eagle>\n"
  },
  {
    "path": "Eagle Files/Memory Display.brd",
    "content": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE eagle SYSTEM \"eagle.dtd\">\n<eagle version=\"7.7.0\">\n<drawing>\n<settings>\n<setting alwaysvectorfont=\"no\"/>\n<setting verticaltext=\"up\"/>\n</settings>\n<grid distance=\"0.025\" unitdist=\"inch\" unit=\"inch\" style=\"lines\" multiple=\"1\" display=\"yes\" altdistance=\"0.0125\" altunitdist=\"inch\" altunit=\"inch\"/>\n<layers>\n<layer number=\"1\" name=\"Top\" color=\"4\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"16\" name=\"Bottom\" color=\"1\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"17\" name=\"Pads\" color=\"2\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"18\" name=\"Vias\" color=\"2\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"19\" name=\"Unrouted\" color=\"6\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"20\" name=\"Dimension\" color=\"15\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"21\" name=\"tPlace\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"22\" name=\"bPlace\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"23\" name=\"tOrigins\" color=\"15\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"24\" name=\"bOrigins\" color=\"15\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"25\" name=\"tNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"26\" name=\"bNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"27\" name=\"tValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"28\" name=\"bValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"29\" name=\"tStop\" color=\"7\" fill=\"3\" visible=\"no\" active=\"yes\"/>\n<layer number=\"30\" name=\"bStop\" color=\"7\" fill=\"6\" visible=\"no\" active=\"yes\"/>\n<layer number=\"31\" name=\"tCream\" color=\"7\" fill=\"4\" visible=\"no\" active=\"yes\"/>\n<layer number=\"32\" name=\"bCream\" color=\"7\" fill=\"5\" visible=\"no\" active=\"yes\"/>\n<layer number=\"33\" name=\"tFinish\" color=\"6\" fill=\"3\" visible=\"no\" active=\"yes\"/>\n<layer number=\"34\" name=\"bFinish\" color=\"6\" fill=\"6\" visible=\"no\" active=\"yes\"/>\n<layer number=\"35\" name=\"tGlue\" color=\"7\" fill=\"4\" visible=\"no\" active=\"yes\"/>\n<layer number=\"36\" name=\"bGlue\" color=\"7\" fill=\"5\" visible=\"no\" active=\"yes\"/>\n<layer number=\"37\" name=\"tTest\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"38\" name=\"bTest\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"39\" name=\"tKeepout\" color=\"4\" fill=\"11\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"40\" name=\"bKeepout\" color=\"1\" fill=\"11\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"41\" name=\"tRestrict\" color=\"4\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"42\" name=\"bRestrict\" color=\"1\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"43\" name=\"vRestrict\" color=\"2\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"44\" name=\"Drills\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"45\" name=\"Holes\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"46\" name=\"Milling\" color=\"3\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"47\" name=\"Measures\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"48\" name=\"Document\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"49\" name=\"Reference\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"50\" name=\"dxf\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"51\" name=\"tDocu\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"52\" name=\"bDocu\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"53\" name=\"tGND_GNDA\" color=\"7\" fill=\"9\" visible=\"no\" active=\"no\"/>\n<layer number=\"54\" name=\"bGND_GNDA\" color=\"1\" fill=\"9\" visible=\"no\" active=\"no\"/>\n<layer number=\"56\" name=\"wert\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"57\" name=\"tCAD\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"59\" name=\"tCarbon\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"60\" name=\"bCarbon\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"88\" name=\"SimResults\" color=\"9\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"89\" name=\"SimProbes\" color=\"9\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"90\" name=\"Modules\" color=\"5\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"91\" name=\"Nets\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"92\" name=\"Busses\" color=\"1\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"93\" name=\"Pins\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"94\" name=\"Symbols\" color=\"4\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"95\" name=\"Names\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"96\" name=\"Values\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"97\" name=\"Info\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"98\" name=\"Guide\" color=\"6\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"99\" name=\"SpiceOrder\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"100\" name=\"Muster\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"101\" name=\"Patch_Top\" color=\"12\" fill=\"4\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"102\" name=\"Vscore\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"103\" name=\"fp3\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"104\" name=\"Name\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"105\" name=\"Beschreib\" color=\"9\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"106\" name=\"BGA-Top\" color=\"4\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"107\" name=\"BD-Top\" color=\"5\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"108\" name=\"fp8\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"109\" name=\"fp9\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"110\" name=\"fp0\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"111\" name=\"LPC17xx\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"112\" name=\"tSilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"113\" name=\"ReferenceLS\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"114\" name=\"Badge_Outline\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"115\" name=\"ReferenceISLANDS\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"116\" name=\"Patch_BOT\" color=\"9\" fill=\"4\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"118\" name=\"Rect_Pads\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"120\" name=\"tCream2\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"121\" name=\"_tsilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"122\" name=\"_bsilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"123\" name=\"tTestmark\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"124\" name=\"bTestmark\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"125\" name=\"_tNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"126\" name=\"_bNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"127\" name=\"_tValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"128\" name=\"_bValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"129\" name=\"Mask\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"131\" name=\"tAdjust\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"132\" name=\"bAdjust\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"144\" name=\"Drill_legend\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"150\" name=\"Notes\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"151\" name=\"HeatSink\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"152\" name=\"_bDocu\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"153\" name=\"FabDoc1\" color=\"6\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"154\" name=\"FabDoc2\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"155\" name=\"FabDoc3\" color=\"7\" fill=\"15\" visible=\"no\" active=\"no\"/>\n<layer number=\"199\" name=\"Contour\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"200\" name=\"200bmp\" color=\"1\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"201\" name=\"201bmp\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"202\" name=\"202bmp\" color=\"3\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"203\" name=\"203bmp\" color=\"4\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"204\" name=\"204bmp\" color=\"5\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"205\" name=\"205bmp\" color=\"6\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"206\" name=\"206bmp\" color=\"7\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"207\" name=\"207bmp\" color=\"8\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"208\" name=\"208bmp\" color=\"9\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"209\" name=\"209bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"210\" name=\"210bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"211\" name=\"211bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"212\" name=\"212bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"213\" name=\"213bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"214\" name=\"214bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"215\" name=\"215bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"216\" name=\"216bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"217\" name=\"217bmp\" color=\"18\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"218\" name=\"218bmp\" color=\"19\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"219\" name=\"219bmp\" color=\"20\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"220\" name=\"220bmp\" color=\"21\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"221\" name=\"221bmp\" color=\"22\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"222\" name=\"222bmp\" color=\"23\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"223\" name=\"223bmp\" color=\"24\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"224\" name=\"224bmp\" color=\"25\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"225\" name=\"225bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"226\" name=\"226bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"227\" name=\"227bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"228\" name=\"228bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"229\" name=\"229bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"230\" name=\"230bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"231\" name=\"Eagle3D_PG1\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"232\" name=\"Eagle3D_PG2\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"233\" name=\"Eagle3D_PG3\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"248\" name=\"Housing\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"249\" name=\"Edge\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"250\" name=\"Descript\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"251\" name=\"SMDround\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"254\" name=\"cooling\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"255\" name=\"routoute\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n</layers>\n<board>\n<plain>\n<wire x1=\"63\" y1=\"55\" x2=\"1\" y2=\"55\" width=\"0.254\" layer=\"20\"/>\n<wire x1=\"1\" y1=\"55\" x2=\"0\" y2=\"54\" width=\"0.254\" layer=\"20\" curve=\"90\"/>\n<wire x1=\"0\" y1=\"54\" x2=\"0\" y2=\"3\" width=\"0.254\" layer=\"20\"/>\n<wire x1=\"0\" y1=\"3\" x2=\"3\" y2=\"0\" width=\"0.254\" layer=\"20\" curve=\"90\"/>\n<wire x1=\"3\" y1=\"0\" x2=\"61\" y2=\"0\" width=\"0.254\" layer=\"20\"/>\n<wire x1=\"61\" y1=\"0\" x2=\"64\" y2=\"3\" width=\"0.254\" layer=\"20\" curve=\"90\"/>\n<wire x1=\"64\" y1=\"3\" x2=\"64\" y2=\"54\" width=\"0.254\" layer=\"20\"/>\n<wire x1=\"64\" y1=\"54\" x2=\"63\" y2=\"55\" width=\"0.254\" layer=\"20\" curve=\"90\"/>\n<dimension x1=\"0\" y1=\"-1\" x2=\"64\" y2=\"-1\" x3=\"32\" y3=\"-5\" textsize=\"1.778\" layer=\"48\"/>\n<dimension x1=\"65\" y1=\"0\" x2=\"65\" y2=\"55\" x3=\"68.999996875\" y3=\"27.5\" textsize=\"1.778\" layer=\"48\"/>\n<wire x1=\"63\" y1=\"11\" x2=\"63\" y2=\"54\" width=\"0.4064\" layer=\"25\"/>\n<wire x1=\"63\" y1=\"54\" x2=\"1\" y2=\"54\" width=\"0.4064\" layer=\"25\"/>\n<wire x1=\"1\" y1=\"54\" x2=\"1\" y2=\"11\" width=\"0.4064\" layer=\"25\"/>\n<wire x1=\"1\" y1=\"11\" x2=\"63\" y2=\"11\" width=\"0.4064\" layer=\"25\"/>\n<dimension x1=\"-1\" y1=\"54\" x2=\"-1\" y2=\"12\" x3=\"-3\" y3=\"33\" textsize=\"1.778\" layer=\"48\"/>\n<dimension x1=\"1\" y1=\"56\" x2=\"63\" y2=\"56\" x3=\"32\" y3=\"58\" textsize=\"1.778\" layer=\"48\"/>\n<wire x1=\"37.5\" y1=\"9\" x2=\"37.5\" y2=\"7\" width=\"0.4064\" layer=\"46\"/>\n<wire x1=\"37.5\" y1=\"7\" x2=\"36.5\" y2=\"6\" width=\"0.4064\" layer=\"46\" curve=\"-90\"/>\n<wire x1=\"36.5\" y1=\"6\" x2=\"27.5\" y2=\"6\" width=\"0.4064\" layer=\"46\"/>\n<wire x1=\"27.5\" y1=\"6\" x2=\"26.5\" y2=\"7\" width=\"0.4064\" layer=\"46\" curve=\"-90\"/>\n<wire x1=\"26.5\" y1=\"7\" x2=\"26.5\" y2=\"9\" width=\"0.4064\" layer=\"46\"/>\n<wire x1=\"26.5\" y1=\"9\" x2=\"27.5\" y2=\"10\" width=\"0.4064\" layer=\"46\" curve=\"-90\"/>\n<wire x1=\"27.5\" y1=\"10\" x2=\"36.5\" y2=\"10\" width=\"0.4064\" layer=\"46\"/>\n<wire x1=\"36.5\" y1=\"10\" x2=\"37.5\" y2=\"9\" width=\"0.4064\" layer=\"46\" curve=\"-90\"/>\n<rectangle x1=\"2\" y1=\"15\" x2=\"21\" y2=\"53\" layer=\"40\"/>\n<text x=\"32.635\" y=\"14.585\" size=\"1.6764\" layer=\"25\" align=\"center\">SHARP MEMORY LCD</text>\n<wire x1=\"2\" y1=\"52\" x2=\"2\" y2=\"16\" width=\"0.4064\" layer=\"26\"/>\n<wire x1=\"2\" y1=\"16\" x2=\"3\" y2=\"15\" width=\"0.4064\" layer=\"26\" curve=\"90\"/>\n<wire x1=\"3\" y1=\"15\" x2=\"20\" y2=\"15\" width=\"0.4064\" layer=\"26\"/>\n<wire x1=\"2\" y1=\"52\" x2=\"3\" y2=\"53\" width=\"0.4064\" layer=\"26\" curve=\"-90\"/>\n<wire x1=\"3\" y1=\"53\" x2=\"20\" y2=\"53\" width=\"0.4064\" layer=\"26\"/>\n<wire x1=\"20\" y1=\"53\" x2=\"21\" y2=\"52\" width=\"0.4064\" layer=\"26\" curve=\"-90\"/>\n<wire x1=\"20\" y1=\"15\" x2=\"21\" y2=\"16\" width=\"0.4064\" layer=\"26\" curve=\"90\"/>\n<wire x1=\"21\" y1=\"16\" x2=\"21\" y2=\"52\" width=\"0.4064\" layer=\"26\"/>\n<text x=\"11.365\" y=\"17.22\" size=\"1.6764\" layer=\"26\" rot=\"MR0\" align=\"center\">3.7V LiPo</text>\n<text x=\"50\" y=\"5\" size=\"1.27\" layer=\"26\" rot=\"MR180\" align=\"center\">Maximilian Kern\n09/2019</text>\n<rectangle x1=\"4.3455\" y1=\"2.5223\" x2=\"5.0059\" y2=\"2.5731\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.0915\" y1=\"2.5731\" x2=\"5.2091\" y2=\"2.6239\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.8883\" y1=\"2.6239\" x2=\"5.4123\" y2=\"2.6747\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.7359\" y1=\"2.6747\" x2=\"5.5647\" y2=\"2.7255\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"2.7255\" x2=\"5.6663\" y2=\"2.7763\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.5327\" y1=\"2.7763\" x2=\"5.7679\" y2=\"2.8271\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.4819\" y1=\"2.8271\" x2=\"5.8695\" y2=\"2.8779\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.5327\" y1=\"2.8779\" x2=\"5.9711\" y2=\"2.9287\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.5327\" y1=\"2.9287\" x2=\"6.0727\" y2=\"2.9795\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.5835\" y1=\"2.9795\" x2=\"6.1235\" y2=\"3.0303\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.1075\" y1=\"3.0303\" x2=\"6.1743\" y2=\"3.0811\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.5835\" y1=\"3.0303\" x2=\"4.1931\" y2=\"3.0811\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.2599\" y1=\"3.0811\" x2=\"6.2251\" y2=\"3.1319\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.0811\" x2=\"4.0407\" y2=\"3.1319\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.4123\" y1=\"3.1319\" x2=\"6.3267\" y2=\"3.1827\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.1319\" x2=\"3.8883\" y2=\"3.1827\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.5647\" y1=\"3.1827\" x2=\"6.3775\" y2=\"3.2335\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6851\" y1=\"3.1827\" x2=\"3.7867\" y2=\"3.2335\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.6155\" y1=\"3.2335\" x2=\"6.4283\" y2=\"3.2843\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.7171\" y1=\"3.2843\" x2=\"6.4791\" y2=\"3.3351\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.7679\" y1=\"3.3351\" x2=\"6.5299\" y2=\"3.3859\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.8695\" y1=\"3.3859\" x2=\"6.5299\" y2=\"3.4367\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.9203\" y1=\"3.4367\" x2=\"6.5807\" y2=\"3.4875\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.9711\" y1=\"3.4875\" x2=\"6.6315\" y2=\"3.5383\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.0219\" y1=\"3.5383\" x2=\"6.6823\" y2=\"3.5891\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.0727\" y1=\"3.5891\" x2=\"6.7331\" y2=\"3.6399\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.1235\" y1=\"3.6399\" x2=\"6.7331\" y2=\"3.6907\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.1743\" y1=\"3.6907\" x2=\"6.7839\" y2=\"3.7415\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.2251\" y1=\"3.7415\" x2=\"6.6823\" y2=\"3.7923\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.7415\" x2=\"5.6663\" y2=\"3.7923\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.2759\" y1=\"3.7923\" x2=\"6.5807\" y2=\"3.8431\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.7923\" x2=\"5.6663\" y2=\"3.8431\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.2759\" y1=\"3.8431\" x2=\"6.5299\" y2=\"3.8939\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.8431\" x2=\"5.6663\" y2=\"3.8939\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.3267\" y1=\"3.8939\" x2=\"6.4283\" y2=\"3.9447\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.8939\" x2=\"5.6663\" y2=\"3.9447\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.9447\" x2=\"5.6663\" y2=\"3.9955\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"3.9955\" x2=\"5.6663\" y2=\"4.0463\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.0463\" x2=\"5.6663\" y2=\"4.0971\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.0971\" x2=\"5.6663\" y2=\"4.1479\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.1479\" x2=\"5.6663\" y2=\"4.1987\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.1987\" x2=\"5.6663\" y2=\"4.2495\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.6343\" y1=\"4.2495\" x2=\"5.6663\" y2=\"4.3003\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.3003\" x2=\"4.9043\" y2=\"4.3511\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.3511\" x2=\"4.9043\" y2=\"4.4019\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.4019\" x2=\"4.9551\" y2=\"4.4527\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.4527\" x2=\"5.0567\" y2=\"4.5035\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.5035\" x2=\"5.1075\" y2=\"4.5543\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.5543\" x2=\"5.1583\" y2=\"4.6051\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2439\" y1=\"4.6051\" x2=\"5.2599\" y2=\"4.6559\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2947\" y1=\"4.6559\" x2=\"5.3107\" y2=\"4.7067\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2947\" y1=\"4.7067\" x2=\"5.3615\" y2=\"4.7575\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.3455\" y1=\"4.7575\" x2=\"5.4123\" y2=\"4.8083\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.4471\" y1=\"4.8083\" x2=\"5.4631\" y2=\"4.8591\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.4979\" y1=\"4.8591\" x2=\"5.5647\" y2=\"4.9099\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.5487\" y1=\"4.9099\" x2=\"5.6155\" y2=\"4.9607\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.5995\" y1=\"4.9607\" x2=\"5.6663\" y2=\"5.0115\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"5.0115\" x2=\"5.7679\" y2=\"5.0623\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.0623\" x2=\"7.1395\" y2=\"5.1131\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7519\" y1=\"5.0623\" x2=\"5.8187\" y2=\"5.1131\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.1131\" x2=\"7.1395\" y2=\"5.1639\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.8027\" y1=\"5.1131\" x2=\"5.8695\" y2=\"5.1639\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.1639\" x2=\"7.1395\" y2=\"5.2147\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.8535\" y1=\"5.1639\" x2=\"5.9203\" y2=\"5.2147\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.2147\" x2=\"7.1395\" y2=\"5.2655\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.9551\" y1=\"5.2147\" x2=\"5.9711\" y2=\"5.2655\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.2655\" x2=\"7.1395\" y2=\"5.3163\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.0059\" y1=\"5.2655\" x2=\"5.9711\" y2=\"5.3163\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.3163\" x2=\"7.0887\" y2=\"5.3671\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.0567\" y1=\"5.3163\" x2=\"6.0219\" y2=\"5.3671\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6315\" y1=\"5.3671\" x2=\"7.0887\" y2=\"5.4179\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.1075\" y1=\"5.3671\" x2=\"6.0219\" y2=\"5.4179\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.4179\" x2=\"7.0887\" y2=\"5.4687\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.0567\" y1=\"5.4179\" x2=\"6.0219\" y2=\"5.4687\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.4687\" x2=\"7.0887\" y2=\"5.5195\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.9043\" y1=\"5.4687\" x2=\"6.0219\" y2=\"5.5195\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.5195\" x2=\"7.0887\" y2=\"5.5703\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7519\" y1=\"5.5195\" x2=\"5.9711\" y2=\"5.5703\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"5.5703\" x2=\"7.0379\" y2=\"5.6211\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.5995\" y1=\"5.5703\" x2=\"5.9711\" y2=\"5.6211\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5299\" y1=\"5.6211\" x2=\"7.0379\" y2=\"5.6719\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.4471\" y1=\"5.6211\" x2=\"5.9203\" y2=\"5.6719\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5299\" y1=\"5.6719\" x2=\"7.0379\" y2=\"5.7227\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.2947\" y1=\"5.6719\" x2=\"5.8695\" y2=\"5.7227\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.7227\" x2=\"7.0379\" y2=\"5.7735\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.1423\" y1=\"5.7227\" x2=\"5.4123\" y2=\"5.7735\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.7735\" x2=\"6.9871\" y2=\"5.8243\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.0407\" y1=\"5.7735\" x2=\"5.2091\" y2=\"5.8243\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.8243\" x2=\"6.9871\" y2=\"5.8751\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.9899\" y1=\"5.8243\" x2=\"5.1075\" y2=\"5.8751\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.4283\" y1=\"5.8751\" x2=\"6.9871\" y2=\"5.9259\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"5.8751\" x2=\"4.9551\" y2=\"5.9259\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.3775\" y1=\"5.9259\" x2=\"6.9363\" y2=\"5.9767\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"5.9259\" x2=\"4.8027\" y2=\"5.9767\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.4791\" y1=\"5.9767\" x2=\"6.9363\" y2=\"6.0275\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"5.9767\" x2=\"4.6503\" y2=\"6.0275\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.5807\" y1=\"6.0275\" x2=\"6.8855\" y2=\"6.0783\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.9391\" y1=\"6.0275\" x2=\"4.4979\" y2=\"6.0783\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.6823\" y1=\"6.0783\" x2=\"6.8855\" y2=\"6.1291\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.0407\" y1=\"6.0783\" x2=\"4.3455\" y2=\"6.1291\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.8723\" y1=\"6.0783\" x2=\"2.9739\" y2=\"6.1291\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"6.7331\" y1=\"6.1291\" x2=\"6.8347\" y2=\"6.1799\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.7707\" y1=\"6.1291\" x2=\"3.0247\" y2=\"6.1799\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.7199\" y1=\"6.1799\" x2=\"3.0755\" y2=\"6.2307\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.6183\" y1=\"6.2307\" x2=\"3.1263\" y2=\"6.2815\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.5675\" y1=\"6.2815\" x2=\"3.1771\" y2=\"6.3323\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.5675\" y1=\"6.3323\" x2=\"3.1771\" y2=\"6.3831\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.6183\" y1=\"6.3831\" x2=\"3.2279\" y2=\"6.4339\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.6691\" y1=\"6.4339\" x2=\"3.2787\" y2=\"6.4847\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.6691\" y1=\"6.4847\" x2=\"3.3803\" y2=\"6.5355\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.7199\" y1=\"6.5355\" x2=\"3.4311\" y2=\"6.5863\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.7707\" y1=\"6.5863\" x2=\"3.4819\" y2=\"6.6371\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.8215\" y1=\"6.6371\" x2=\"3.5327\" y2=\"6.6879\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.8723\" y1=\"6.6879\" x2=\"3.6343\" y2=\"6.7387\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.8723\" y1=\"6.7387\" x2=\"3.5835\" y2=\"6.7895\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.5139\" y1=\"6.7895\" x2=\"5.6155\" y2=\"6.8403\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"2.9739\" y1=\"6.7895\" x2=\"3.5327\" y2=\"6.8403\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.3615\" y1=\"6.8403\" x2=\"5.6663\" y2=\"6.8911\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.0247\" y1=\"6.8403\" x2=\"3.5327\" y2=\"6.8911\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.2091\" y1=\"6.8911\" x2=\"5.7171\" y2=\"6.9419\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.0755\" y1=\"6.8911\" x2=\"3.4819\" y2=\"6.9419\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"5.0059\" y1=\"6.9419\" x2=\"5.7171\" y2=\"6.9927\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.1263\" y1=\"6.9419\" x2=\"3.4819\" y2=\"6.9927\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"6.9927\" x2=\"5.7679\" y2=\"7.0435\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.1771\" y1=\"6.9927\" x2=\"3.4311\" y2=\"7.0435\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.0435\" x2=\"5.7679\" y2=\"7.0943\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.2787\" y1=\"7.0435\" x2=\"3.4311\" y2=\"7.0943\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.0943\" x2=\"5.8187\" y2=\"7.1451\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"3.3295\" y1=\"7.0943\" x2=\"3.3803\" y2=\"7.1451\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.1451\" x2=\"5.8187\" y2=\"7.1959\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.1959\" x2=\"5.7679\" y2=\"7.2467\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.2467\" x2=\"5.6663\" y2=\"7.2975\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.2975\" x2=\"5.5647\" y2=\"7.3483\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.3483\" x2=\"5.4123\" y2=\"7.3991\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.3991\" x2=\"5.2091\" y2=\"7.4499\" layer=\"16\" rot=\"R180\"/>\n<rectangle x1=\"4.7011\" y1=\"7.4499\" x2=\"5.0059\" y2=\"7.5007\" layer=\"16\" rot=\"R180\"/>\n<wire x1=\"45.085\" y1=\"54.2925\" x2=\"45.085\" y2=\"53.0225\" width=\"0.4064\" layer=\"26\"/>\n<wire x1=\"44.45\" y1=\"53.6575\" x2=\"45.72\" y2=\"53.6575\" width=\"0.4064\" layer=\"26\"/>\n<wire x1=\"46.355\" y1=\"53.6575\" x2=\"47.625\" y2=\"53.6575\" width=\"0.4064\" layer=\"26\"/>\n</plain>\n<libraries>\n<library name=\"SparkFun-Electromechanical\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"JOYSTICK_MINI\">\n<smd name=\"A\" x=\"-3.325\" y=\"1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"B\" x=\"3.325\" y=\"1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"C\" x=\"-3.325\" y=\"-1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"CTR\" x=\"-3.325\" y=\"0\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"D\" x=\"3.325\" y=\"-1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"GND\" x=\"3.325\" y=\"0\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"NC\" x=\"0\" y=\"4.13\" dx=\"1.9\" dy=\"2\" layer=\"1\"/>\n<smd name=\"NC@0\" x=\"0\" y=\"-4.13\" dx=\"1.9\" dy=\"2\" layer=\"1\"/>\n<text x=\"-2.5\" y=\"3.8\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-2.5\" y=\"-4.2\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<hole x=\"0\" y=\"1.9\" drill=\"0.75\"/>\n<hole x=\"0\" y=\"-1.9\" drill=\"1.05\"/>\n<wire x1=\"2.65\" y1=\"-3.5\" x2=\"-2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.65\" y1=\"-3.5\" x2=\"-3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.65\" y1=\"-2.5\" x2=\"-3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.65\" y1=\"2.5\" x2=\"-2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.65\" y1=\"3.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"3.5\" x2=\"2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.65\" y1=\"3.5\" x2=\"3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.65\" y1=\"2.5\" x2=\"3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.65\" y1=\"-2.5\" x2=\"2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.046446875\" y1=\"-0.353553125\" x2=\"-0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.353553125\" y1=\"-1.046446875\" x2=\"0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"0.353553125\" y1=\"-1.046446875\" x2=\"1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.046446875\" y1=\"-0.353553125\" x2=\"1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"1.046446875\" y1=\"0.353553125\" x2=\"0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.353553125\" y1=\"1.046446875\" x2=\"-0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"-0.353553125\" y1=\"1.046446875\" x2=\"-1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.046446875\" y1=\"0.353553125\" x2=\"-1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.3\" y1=\"1.3\" x2=\"-2.2\" y2=\"2.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-1.6\" y2=\"2.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-2.2\" y2=\"1.6\" width=\"0.2032\" layer=\"21\"/>\n<text x=\"-2.9\" y=\"1.9\" size=\"0.8128\" layer=\"21\" ratio=\"20\" rot=\"SR45\">UP</text>\n<wire x1=\"-1\" y1=\"3.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.65\" y1=\"-3.5\" x2=\"-2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.65\" y1=\"-3.5\" x2=\"-3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.65\" y1=\"-2.5\" x2=\"-3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.65\" y1=\"2.5\" x2=\"-2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.65\" y1=\"3.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"1\" y1=\"3.5\" x2=\"2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2.65\" y1=\"3.5\" x2=\"3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3.65\" y1=\"2.5\" x2=\"3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3.65\" y1=\"-2.5\" x2=\"2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.046446875\" y1=\"-0.353553125\" x2=\"-0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-0.353553125\" y1=\"-1.046446875\" x2=\"0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"0.353553125\" y1=\"-1.046446875\" x2=\"1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"1.046446875\" y1=\"-0.353553125\" x2=\"1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.046446875\" y1=\"0.353553125\" x2=\"0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0.353553125\" y1=\"1.046446875\" x2=\"-0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-0.353553125\" y1=\"1.046446875\" x2=\"-1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.046446875\" y1=\"0.353553125\" x2=\"-1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.3\" y1=\"1.3\" x2=\"-2.2\" y2=\"2.2\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-1.6\" y2=\"2.2\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-2.2\" y2=\"1.6\" width=\"0.2032\" layer=\"51\"/>\n<text x=\"-2.9\" y=\"1.9\" size=\"0.8128\" layer=\"51\" ratio=\"20\" rot=\"SR45\">UP</text>\n<wire x1=\"-1\" y1=\"3.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n</package>\n<package name=\"SWITCH-SPST-SMD-A\">\n<wire x1=\"-3.35\" y1=\"1.3\" x2=\"-3.35\" y2=\"-1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.35\" y1=\"-1.3\" x2=\"3.35\" y2=\"-1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.35\" y1=\"-1.3\" x2=\"3.35\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.35\" y1=\"1.3\" x2=\"-0.1\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"1.3\" x2=\"-1.4\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"1.3\" x2=\"-3.35\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"1.3\" x2=\"-0.1\" y2=\"2.8\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"2.8\" x2=\"-1.4\" y2=\"2.8\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"2.8\" x2=\"-1.4\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.35\" y1=\"0.3\" x2=\"-3.35\" y2=\"-0.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.35\" y1=\"0.3\" x2=\"3.35\" y2=\"-0.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.7\" y1=\"1.3\" x2=\"-2.7\" y2=\"1.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.5\" y1=\"-1.3\" x2=\"0\" y2=\"-1.3\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-2.25\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"-0.75\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"2.25\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"GND1\" x=\"-3.65\" y=\"1\" dx=\"1\" dy=\"0.6\" layer=\"1\"/>\n<smd name=\"GND2\" x=\"-3.65\" y=\"-1.1\" dx=\"1\" dy=\"0.8\" layer=\"1\"/>\n<smd name=\"GND3\" x=\"3.65\" y=\"1\" dx=\"1\" dy=\"0.6\" layer=\"1\"/>\n<smd name=\"GND4\" x=\"3.65\" y=\"-1.1\" dx=\"1\" dy=\"0.8\" layer=\"1\"/>\n<text x=\"-1.27\" y=\"0.635\" size=\"0.6096\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"-1.27\" size=\"0.6096\" layer=\"27\">&gt;Value</text>\n<hole x=\"-1.5\" y=\"0\" drill=\"0.9\"/>\n<hole x=\"1.5\" y=\"0\" drill=\"0.9\"/>\n</package>\n</packages>\n</library>\n<library name=\"microbuilder\">\n<packages>\n<package name=\"EVQ-Q2_SMALLER\">\n<wire x1=\"-3.3\" y1=\"3\" x2=\"3.3\" y2=\"3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"3\" x2=\"3.3\" y2=\"-3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"-3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.3\" y1=\"-1.2\" x2=\"-3.3\" y2=\"1.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"1.2\" x2=\"3.3\" y2=\"-1.2\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5033\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"B\" x=\"-3.1\" y=\"2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"B'\" x=\"3.1\" y=\"2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A'\" x=\"3.1\" y=\"-2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A\" x=\"-3.1\" y=\"-2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-3.175\" y=\"3.5\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-3.175\" y=\"-3.683\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-RF\">\n<description>&lt;h3&gt;SparkFun RF, WiFi, Cellular, and Bluetooth&lt;/h3&gt;\nIn this library you'll find things that send or receive RF-- cellular modules, Bluetooth, WiFi, etc.\n&lt;br&gt;\n&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. \n&lt;br&gt;\n&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=\" www.sparkfun.com\"&gt;SparkFun.com&lt;/a&gt;.\n&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;\n&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"ESP-WROOM-32\">\n<wire x1=\"-10.3\" y1=\"-9\" x2=\"-10.3\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"-10.3\" y1=\"9\" x2=\"9.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"9\" x2=\"15.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"15.2\" y1=\"9\" x2=\"15.2\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"15.2\" y1=\"-9\" x2=\"9.2\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"-9\" x2=\"-10.3\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"-9\" x2=\"9.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<text x=\"12.2\" y=\"0\" size=\"1.27\" layer=\"51\" rot=\"R270\" align=\"center\">Keepout Zone</text>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"8.15\" y=\"9\"/>\n<vertex x=\"8\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"7.925\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"7.475\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"7.4\" y=\"9\"/>\n<vertex x=\"7.25\" y=\"9\"/>\n<vertex x=\"7.25\" y=\"8.55\"/>\n<vertex x=\"8.15\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"9\"/>\n<vertex x=\"6.73\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"6.655\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"6.205\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"6.13\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"8.55\"/>\n<vertex x=\"6.88\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"9\"/>\n<vertex x=\"5.46\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"5.385\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"4.935\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"4.86\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"8.55\"/>\n<vertex x=\"5.61\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"9\"/>\n<vertex x=\"4.19\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"4.115\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"3.665\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"3.59\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"8.55\"/>\n<vertex x=\"4.34\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"9\"/>\n<vertex x=\"2.92\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"2.845\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"2.395\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"2.32\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"8.55\"/>\n<vertex x=\"3.07\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"9\"/>\n<vertex x=\"1.65\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"1.575\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"1.125\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"1.05\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"8.55\"/>\n<vertex x=\"1.8\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"9\"/>\n<vertex x=\"0.38\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"0.305\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-0.145\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-0.22\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"8.55\"/>\n<vertex x=\"0.53\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"9\"/>\n<vertex x=\"-0.89\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-0.965\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-1.415\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-1.49\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"8.55\"/>\n<vertex x=\"-0.74\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"9\"/>\n<vertex x=\"-2.16\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-2.235\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-2.685\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-2.76\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"8.55\"/>\n<vertex x=\"-2.01\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"9\"/>\n<vertex x=\"-3.43\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-3.505\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-3.955\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-4.03\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"8.55\"/>\n<vertex x=\"-3.28\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"9\"/>\n<vertex x=\"-4.7\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-4.775\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-5.225\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-5.3\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"8.55\"/>\n<vertex x=\"-4.55\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"9\"/>\n<vertex x=\"-5.97\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-6.045\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-6.495\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-6.57\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"8.55\"/>\n<vertex x=\"-5.82\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"9\"/>\n<vertex x=\"-7.24\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-7.315\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-7.765\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-7.84\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"8.55\"/>\n<vertex x=\"-7.09\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"9\"/>\n<vertex x=\"-8.51\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-8.585\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-9.035\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-9.11\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"8.55\"/>\n<vertex x=\"-8.36\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"8.15\" y=\"-9\"/>\n<vertex x=\"8\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"7.925\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"7.475\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"7.4\" y=\"-9\"/>\n<vertex x=\"7.25\" y=\"-9\"/>\n<vertex x=\"7.25\" y=\"-8.55\"/>\n<vertex x=\"8.15\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"-9\"/>\n<vertex x=\"6.73\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"6.655\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"6.205\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"6.13\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-8.55\"/>\n<vertex x=\"6.88\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"-9\"/>\n<vertex x=\"5.46\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"5.385\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"4.935\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"4.86\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-8.55\"/>\n<vertex x=\"5.61\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"-9\"/>\n<vertex x=\"4.19\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"4.115\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"3.665\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"3.59\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-8.55\"/>\n<vertex x=\"4.34\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"-9\"/>\n<vertex x=\"2.92\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"2.845\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"2.395\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"2.32\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-8.55\"/>\n<vertex x=\"3.07\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"-9\"/>\n<vertex x=\"1.65\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"1.575\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"1.125\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"1.05\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-8.55\"/>\n<vertex x=\"1.8\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"-9\"/>\n<vertex x=\"0.38\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"0.305\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-0.145\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-0.22\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-8.55\"/>\n<vertex x=\"0.53\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"-9\"/>\n<vertex x=\"-0.89\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-0.965\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-1.415\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-1.49\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-8.55\"/>\n<vertex x=\"-0.74\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"-9\"/>\n<vertex x=\"-2.16\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-2.235\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-2.685\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-2.76\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-8.55\"/>\n<vertex x=\"-2.01\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"-9\"/>\n<vertex x=\"-3.43\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-3.505\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-3.955\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-4.03\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-8.55\"/>\n<vertex x=\"-3.28\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"-9\"/>\n<vertex x=\"-4.7\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-4.775\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-5.225\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-5.3\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-8.55\"/>\n<vertex x=\"-4.55\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"-9\"/>\n<vertex x=\"-5.97\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-6.045\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-6.495\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-6.57\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-8.55\"/>\n<vertex x=\"-5.82\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"-9\"/>\n<vertex x=\"-7.24\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-7.315\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-7.765\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-7.84\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-8.55\"/>\n<vertex x=\"-7.09\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"-9\"/>\n<vertex x=\"-8.51\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-8.585\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-9.035\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-9.11\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-8.55\"/>\n<vertex x=\"-8.36\" y=\"-8.55\"/>\n</polygon>\n<smd name=\"1\" x=\"7.7\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"2\" x=\"6.43\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"3\" x=\"5.16\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"4\" x=\"3.89\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"5\" x=\"2.62\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"6\" x=\"1.35\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"7\" x=\"0.08\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"8\" x=\"-1.19\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"9\" x=\"-2.46\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"10\" x=\"-3.73\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"11\" x=\"-5\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"12\" x=\"-6.27\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"13\" x=\"-7.54\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"14\" x=\"-8.81\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"1.085\"/>\n<vertex x=\"-10.3\" y=\"0.935\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"0.86\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"0.41\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"0.335\"/>\n<vertex x=\"-10.3\" y=\"0.185\"/>\n<vertex x=\"-9.85\" y=\"0.185\"/>\n<vertex x=\"-9.85\" y=\"1.085\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-0.185\"/>\n<vertex x=\"-10.3\" y=\"-0.335\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-0.41\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-0.86\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-0.935\"/>\n<vertex x=\"-10.3\" y=\"-1.085\"/>\n<vertex x=\"-9.85\" y=\"-1.085\"/>\n<vertex x=\"-9.85\" y=\"-0.185\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"2.355\"/>\n<vertex x=\"-10.3\" y=\"2.205\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"2.13\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"1.68\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"1.605\"/>\n<vertex x=\"-10.3\" y=\"1.455\"/>\n<vertex x=\"-9.85\" y=\"1.455\"/>\n<vertex x=\"-9.85\" y=\"2.355\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"3.625\"/>\n<vertex x=\"-10.3\" y=\"3.475\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"3.4\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"2.95\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"2.875\"/>\n<vertex x=\"-10.3\" y=\"2.725\"/>\n<vertex x=\"-9.85\" y=\"2.725\"/>\n<vertex x=\"-9.85\" y=\"3.625\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"4.895\"/>\n<vertex x=\"-10.3\" y=\"4.745\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"4.67\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"4.22\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"4.145\"/>\n<vertex x=\"-10.3\" y=\"3.995\"/>\n<vertex x=\"-9.85\" y=\"3.995\"/>\n<vertex x=\"-9.85\" y=\"4.895\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"6.165\"/>\n<vertex x=\"-10.3\" y=\"6.015\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"5.94\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"5.49\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"5.415\"/>\n<vertex x=\"-10.3\" y=\"5.265\"/>\n<vertex x=\"-9.85\" y=\"5.265\"/>\n<vertex x=\"-9.85\" y=\"6.165\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-1.455\"/>\n<vertex x=\"-10.3\" y=\"-1.605\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-1.68\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-2.13\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-2.205\"/>\n<vertex x=\"-10.3\" y=\"-2.355\"/>\n<vertex x=\"-9.85\" y=\"-2.355\"/>\n<vertex x=\"-9.85\" y=\"-1.455\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-2.725\"/>\n<vertex x=\"-10.3\" y=\"-2.875\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-2.95\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-3.4\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-3.475\"/>\n<vertex x=\"-10.3\" y=\"-3.625\"/>\n<vertex x=\"-9.85\" y=\"-3.625\"/>\n<vertex x=\"-9.85\" y=\"-2.725\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-3.995\"/>\n<vertex x=\"-10.3\" y=\"-4.145\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-4.22\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-4.67\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-4.745\"/>\n<vertex x=\"-10.3\" y=\"-4.895\"/>\n<vertex x=\"-9.85\" y=\"-4.895\"/>\n<vertex x=\"-9.85\" y=\"-3.995\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-5.265\"/>\n<vertex x=\"-10.3\" y=\"-5.415\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-5.49\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-5.94\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-6.015\"/>\n<vertex x=\"-10.3\" y=\"-6.165\"/>\n<vertex x=\"-9.85\" y=\"-6.165\"/>\n<vertex x=\"-9.85\" y=\"-5.265\"/>\n</polygon>\n<smd name=\"15\" x=\"-10.3\" y=\"5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"16\" x=\"-10.3\" y=\"4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"17\" x=\"-10.3\" y=\"3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"18\" x=\"-10.3\" y=\"1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"19\" x=\"-10.3\" y=\"0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"20\" x=\"-10.3\" y=\"-0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"21\" x=\"-10.3\" y=\"-1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"22\" x=\"-10.3\" y=\"-3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"23\" x=\"-10.3\" y=\"-4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"24\" x=\"-10.3\" y=\"-5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"25\" x=\"-8.81\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"26\" x=\"-7.54\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"27\" x=\"-6.27\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"28\" x=\"-5\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"29\" x=\"-3.73\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"30\" x=\"-2.46\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"31\" x=\"-1.19\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"32\" x=\"0.08\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"33\" x=\"1.35\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"34\" x=\"2.62\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"35\" x=\"3.89\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"36\" x=\"5.16\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"37\" x=\"6.43\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"38\" x=\"7.7\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"GND\" x=\"0\" y=\"0\" dx=\"6\" dy=\"6\" layer=\"1\"/>\n<wire x1=\"-10.427\" y1=\"6.35\" x2=\"-10.427\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"9.127\" x2=\"-9.4\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"-6.35\" x2=\"-10.427\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"-9.127\" x2=\"-9.4\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<text x=\"-7.76\" y=\"0\" size=\"0.8128\" layer=\"25\" rot=\"R90\" align=\"center\">&gt;Name</text>\n<text x=\"-6.49\" y=\"0\" size=\"0.8128\" layer=\"27\" rot=\"R90\" align=\"center\">&gt;Value</text>\n<wire x1=\"8.311\" y1=\"9.127\" x2=\"15.327\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.311\" y1=\"-9.127\" x2=\"15.327\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"15.327\" y1=\"9.127\" x2=\"15.327\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-Resistors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"0603\">\n<description>&lt;p&gt;&lt;b&gt;Generic 1608 (0603) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"0\" y=\"0.762\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.762\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-Capacitors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"0603\">\n<description>&lt;p&gt;&lt;b&gt;Generic 1608 (0603) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"0\" y=\"0.762\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.762\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n<package name=\"0603-CAP\">\n<wire x1=\"-1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"0.027940625\" x2=\"0\" y2=\"-0.027940625\" width=\"0.381\" layer=\"21\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"0.762\" size=\"0.4064\" layer=\"25\" font=\"vector\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-1.143\" size=\"0.4064\" layer=\"27\" font=\"vector\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n<package name=\"0805\">\n<description>&lt;p&gt;&lt;b&gt;Generic 2012 (0805) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<smd name=\"1\" x=\"-0.9\" y=\"0\" dx=\"0.8\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.9\" y=\"0\" dx=\"0.8\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"0\" y=\"0.889\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.889\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<wire x1=\"-1.5\" y1=\"0.8\" x2=\"1.5\" y2=\"0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.5\" y1=\"0.8\" x2=\"1.5\" y2=\"-0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.5\" y1=\"-0.8\" x2=\"-1.5\" y2=\"-0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.5\" y1=\"-0.8\" x2=\"-1.5\" y2=\"0.8\" width=\"0.0508\" layer=\"39\"/>\n</package>\n</packages>\n</library>\n<library name=\"esp32-thing-temp\">\n<packages>\n<package name=\"SC70-6\">\n<description>&lt;h3&gt;SC-88/SC70-6/SOT-363 6-pin Package&lt;/h3&gt;\n&lt;p&gt;&lt;a href=\"http://www.onsemi.com/pub_link/Collateral/MBT3904DW1T1-D.PDF\"&gt;Example Datasheet&lt;/a&gt;&lt;/p&gt;</description>\n<circle x=\"-1.3335\" y=\"-1.016\" radius=\"0.254\" width=\"0\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"0.625\" x2=\"-1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"0.625\" x2=\"-1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1\" y1=\"-0.625\" x2=\"1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.1176\" y1=\"0.7493\" x2=\"-1.1176\" y2=\"-0.6223\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.1176\" y1=\"-0.7493\" x2=\"1.1176\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.9779\" y1=\"0.7493\" x2=\"-1.1176\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.1176\" y1=\"0.7493\" x2=\"0.9779\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.1176\" y1=\"-0.6223\" x2=\"-0.9779\" y2=\"-0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.9779\" y1=\"-0.7493\" x2=\"1.1176\" y2=\"-0.7493\" width=\"0.2032\" layer=\"21\"/>\n<rectangle x1=\"-0.1016\" y1=\"0.6858\" x2=\"0.1016\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.1016\" y1=\"-1.0414\" x2=\"0.1016\" y2=\"-0.6858\" layer=\"51\"/>\n<rectangle x1=\"0.5484\" y1=\"0.6858\" x2=\"0.7516\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.7516\" y1=\"0.6858\" x2=\"-0.5484\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.7516\" y1=\"-1.0414\" x2=\"-0.5484\" y2=\"-0.6858\" layer=\"51\"/>\n<rectangle x1=\"0.5484\" y1=\"-1.0414\" x2=\"0.7516\" y2=\"-0.6858\" layer=\"51\"/>\n<smd name=\"4\" x=\"0.65\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<smd name=\"2\" x=\"0\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"1\" x=\"-0.65\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"0.65\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"5\" x=\"0\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<smd name=\"6\" x=\"-0.65\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<text x=\"0\" y=\"1.397\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.397\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-PowerIC\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find drivers, regulators, and amplifiers.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SOT23-5\">\n<description>&lt;b&gt;Small Outline Transistor&lt;/b&gt;</description>\n<wire x1=\"1.27\" y1=\"0.4294\" x2=\"1.27\" y2=\"-0.4294\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"-0.8\" x2=\"-1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.27\" y1=\"-0.4294\" x2=\"-1.27\" y2=\"0.4294\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.4\" y1=\"0.8\" x2=\"1.4\" y2=\"0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.2684\" y1=\"0.7088\" x2=\"0.2684\" y2=\"0.7088\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"0.8\" x2=\"1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"0.8\" x2=\"-1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<rectangle x1=\"-1.2\" y1=\"-1.5\" x2=\"-0.7\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"-0.25\" y1=\"-1.5\" x2=\"0.25\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"0.7\" y1=\"-1.5\" x2=\"1.2\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"0.7\" y1=\"0.85\" x2=\"1.2\" y2=\"1.5\" layer=\"51\"/>\n<rectangle x1=\"-1.2\" y1=\"0.85\" x2=\"-0.7\" y2=\"1.5\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.95\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"0\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"3\" x=\"0.95\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"4\" x=\"0.95\" y=\"1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"5\" x=\"-0.95\" y=\"1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"2.159\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-0.9525\" y=\"-0.1905\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<circle x=\"-1.6002\" y=\"-1.016\" radius=\"0.127\" width=\"0\" layer=\"21\"/>\n</package>\n<package name=\"PTC-1206\">\n<wire x1=\"-1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.635\" y1=\"-0.762\" x2=\"-0.635\" y2=\"-0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.635\" y1=\"0.762\" x2=\"0.635\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.143\" y1=\"-1.016\" x2=\"0.254\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.254\" y1=\"1.016\" x2=\"1.143\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.4\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<smd name=\"2\" x=\"1.4\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<text x=\"-1.524\" y=\"1.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.524\" y=\"-1.651\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-Connectors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"JST-2-PTH\">\n<pad name=\"1\" x=\"-1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<pad name=\"2\" x=\"1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<text x=\"-1.27\" y=\"5.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"4\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<text x=\"0.6\" y=\"0.7\" size=\"1.27\" layer=\"51\">+</text>\n<text x=\"-1.4\" y=\"0.7\" size=\"1.27\" layer=\"51\">-</text>\n<wire x1=\"-2.95\" y1=\"-1.6\" x2=\"-2.95\" y2=\"6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.95\" y1=\"6\" x2=\"2.95\" y2=\"6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"6\" x2=\"2.95\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.95\" y1=\"-1.6\" x2=\"-2.3\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"-1.6\" x2=\"2.3\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.3\" y1=\"-1.6\" x2=\"-2.3\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.3\" y1=\"-1.6\" x2=\"2.3\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n</package>\n<package name=\"USB-B-MICRO-SMD_V03\">\n<text x=\"-4.66\" y=\"5.96\" size=\"0.3048\" layer=\"51\">PCB Front</text>\n<wire x1=\"-3\" y1=\"5.6\" x2=\"-2.3\" y2=\"5.3\" width=\"0.08\" layer=\"51\"/>\n<wire x1=\"-2.3\" y1=\"5.3\" x2=\"-2.4\" y2=\"5.5\" width=\"0.08\" layer=\"51\"/>\n<wire x1=\"-2.3\" y1=\"5.3\" x2=\"-2.5\" y2=\"5.2\" width=\"0.08\" layer=\"51\"/>\n<text x=\"-1.27\" y=\"5.969\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"5.461\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<smd name=\"D+\" x=\"2.725\" y=\"0\" dx=\"0.4\" dy=\"1.45\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"D-\" x=\"2.725\" y=\"0.65\" dx=\"0.4\" dy=\"1.45\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"VBUS\" x=\"2.725\" y=\"1.3\" dx=\"0.4\" dy=\"1.45\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"ID\" x=\"2.725\" y=\"-0.65\" dx=\"0.4\" dy=\"1.45\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"GND\" x=\"2.725\" y=\"-1.3\" dx=\"0.4\" dy=\"1.45\" layer=\"1\" rot=\"R90\"/>\n<hole x=\"2.2\" y=\"1.9\" drill=\"0.85\"/>\n<hole x=\"2.2\" y=\"-1.9\" drill=\"0.85\"/>\n<rectangle x1=\"-0.75\" y1=\"2.784\" x2=\"0.75\" y2=\"4.584\" layer=\"31\"/>\n<rectangle x1=\"-0.35\" y1=\"-0.75\" x2=\"0.35\" y2=\"0.75\" layer=\"31\"/>\n<rectangle x1=\"-0.75\" y1=\"-4.584\" x2=\"0.75\" y2=\"-2.784\" layer=\"31\"/>\n<wire x1=\"-2.15\" y1=\"3.9\" x2=\"-2.15\" y2=\"-3.9\" width=\"0.127\" layer=\"49\"/>\n<wire x1=\"2.85\" y1=\"3.9\" x2=\"2.85\" y2=\"-3.9\" width=\"0.127\" layer=\"49\"/>\n<wire x1=\"2.85\" y1=\"3.9\" x2=\"-2.15\" y2=\"3.9\" width=\"0.127\" layer=\"49\"/>\n<wire x1=\"2.85\" y1=\"-3.9\" x2=\"-2.15\" y2=\"-3.9\" width=\"0.127\" layer=\"49\"/>\n<wire x1=\"2.981959375\" y1=\"3.99288125\" x2=\"2\" y2=\"3.99288125\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"2\" y1=\"3.99288125\" x2=\"2\" y2=\"4\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"3\" y1=\"4\" x2=\"3\" y2=\"3\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"2\" y1=\"-4\" x2=\"3\" y2=\"-4\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"3\" y1=\"-4\" x2=\"3\" y2=\"-3\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"4\" x2=\"-2\" y2=\"4\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-4\" x2=\"-2\" y2=\"-4\" width=\"0.3048\" layer=\"21\"/>\n<rectangle x1=\"-0.85\" y1=\"2.684\" x2=\"0.85\" y2=\"4.684\" layer=\"29\"/>\n<rectangle x1=\"-0.85\" y1=\"-4.684\" x2=\"0.85\" y2=\"-2.684\" layer=\"29\"/>\n<rectangle x1=\"-0.85\" y1=\"-1.35\" x2=\"0.85\" y2=\"1.35\" layer=\"29\"/>\n<smd name=\"SHIELD1\" x=\"0\" y=\"3.685\" dx=\"1.8\" dy=\"1.5\" layer=\"1\" rot=\"R90\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHIELD3\" x=\"0\" y=\"0\" dx=\"2.5\" dy=\"1.5\" layer=\"1\" rot=\"R90\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHIELD2\" x=\"0\" y=\"-3.685\" dx=\"1.8\" dy=\"1.5\" layer=\"1\" rot=\"R90\" stop=\"no\" cream=\"no\"/>\n<wire x1=\"-2\" y1=\"7\" x2=\"-2\" y2=\"0\" width=\"0\" layer=\"51\"/>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-DigitalIC\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find all manner of digital ICs- microcontrollers, memory chips, logic chips, FPGAs, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SSOP20_L\">\n<description>Longer version of SSOP-20 Package</description>\n<wire x1=\"4.3307\" y1=\"-1.9558\" x2=\"4.3307\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"-3.81\" y=\"-2.54\" radius=\"0.254\" width=\"0\" layer=\"21\"/>\n<text x=\"0\" y=\"0\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<smd name=\"16\" x=\"-0.3175\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"15\" x=\"0.3175\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"14\" x=\"0.9525\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"13\" x=\"1.5875\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"12\" x=\"2.2225\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"11\" x=\"2.8575\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"17\" x=\"-0.9525\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"18\" x=\"-1.5875\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"19\" x=\"-2.2225\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"20\" x=\"-2.8575\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"6\" x=\"0.3175\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"5\" x=\"-0.3175\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"4\" x=\"-0.9525\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"-1.5875\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"-2.2225\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"1\" x=\"-2.8575\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"7\" x=\"0.9525\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"8\" x=\"1.5875\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"9\" x=\"2.2225\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"10\" x=\"2.8575\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<rectangle x1=\"0.1905\" y1=\"-2.9845\" x2=\"0.4445\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"0.8255\" y1=\"-2.9845\" x2=\"1.0795\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"1.4605\" y1=\"-2.9845\" x2=\"1.7145\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"2.0955\" y1=\"-2.9845\" x2=\"2.3495\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"2.7305\" y1=\"-2.9845\" x2=\"2.9845\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-0.4445\" y1=\"-2.9845\" x2=\"-0.1905\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-1.0795\" y1=\"-2.9845\" x2=\"-0.8255\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-1.7145\" y1=\"-2.9845\" x2=\"-1.4605\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-2.3495\" y1=\"-2.9845\" x2=\"-2.0955\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-2.9845\" y1=\"-2.9845\" x2=\"-2.7305\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-0.4445\" y1=\"2.3495\" x2=\"-0.1905\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-1.0795\" y1=\"2.3495\" x2=\"-0.8255\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-1.7145\" y1=\"2.3495\" x2=\"-1.4605\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-2.3495\" y1=\"2.3495\" x2=\"-2.0955\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-2.9845\" y1=\"2.3495\" x2=\"-2.7305\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"0.1905\" y1=\"2.3495\" x2=\"0.4445\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"0.8255\" y1=\"2.3495\" x2=\"1.0795\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"1.4605\" y1=\"2.3495\" x2=\"1.7145\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"2.0955\" y1=\"2.3495\" x2=\"2.3495\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"2.7305\" y1=\"2.3495\" x2=\"2.9845\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<wire x1=\"-4.3307\" y1=\"1.9558\" x2=\"-4.3307\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.3307\" y1=\"-1.9558\" x2=\"-3.2512\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2512\" y1=\"-1.9558\" x2=\"4.3307\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.3307\" y1=\"1.9558\" x2=\"-3.2512\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2512\" y1=\"1.9558\" x2=\"4.3307\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n</package>\n</packages>\n</library>\n<library name=\"SparkFun-DiscreteSemi\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SOD-323\">\n<wire x1=\"-0.9\" y1=\"0.65\" x2=\"-0.5\" y2=\"0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"0.65\" x2=\"0.9\" y2=\"0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.9\" y1=\"-0.65\" x2=\"-0.5\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"-0.65\" x2=\"0.9\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"0.65\" x2=\"-0.5\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"C\" x=\"-1.15\" y=\"0\" dx=\"0.63\" dy=\"0.83\" layer=\"1\"/>\n<smd name=\"A\" x=\"1.15\" y=\"0\" dx=\"0.63\" dy=\"0.83\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"1.016\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-1.397\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"SOT23-3\">\n<wire x1=\"1.4224\" y1=\"0.6604\" x2=\"1.4224\" y2=\"-0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.4224\" y1=\"-0.6604\" x2=\"-1.4224\" y2=\"-0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4224\" y1=\"-0.6604\" x2=\"-1.4224\" y2=\"0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4224\" y1=\"0.6604\" x2=\"1.4224\" y2=\"0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.8\" y1=\"0.7\" x2=\"-1.4\" y2=\"0.7\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.4\" y1=\"0.7\" x2=\"-1.4\" y2=\"-0.1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.8\" y1=\"0.7\" x2=\"1.4\" y2=\"0.7\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"0.7\" x2=\"1.4\" y2=\"-0.1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-0.95\" y=\"-1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.95\" y=\"-1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"3\" x=\"0\" y=\"1.1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<text x=\"-0.8255\" y=\"1.778\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-0.1905\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n</packages>\n</library>\n<library name=\"Eagle_FPC_CONNECTOR_AND_FFC_CAB_rev15c\">\n<description>&lt;BR&gt;Wurth Elektronik   FPC Connector and FFC Cable&lt;br&gt;&lt;Hr&gt;\n&lt;BR&gt;&lt;BR&gt; \n&lt;TABLE BORDER=0 CELLSPACING=0 CELLPADDING=0&gt;\n&lt;TR&gt;   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;&lt;br&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt; &lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------------------------&lt;BR&gt;\n&lt;B&gt;&lt;I&gt;&lt;span style='font-size:26pt;\n  color:#FF6600;'&gt;WE &lt;/span&gt;&lt;/i&gt;&lt;/b&gt;\n&lt;BR&gt;\n      ---------------------------&lt;BR&gt;&lt;b&gt;Würth Elektronik&lt;/b&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n\n  &lt;TR&gt;\n    &lt;TD COLSPAN=7&gt;&amp;nbsp;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n  \n&lt;/TABLE&gt;\n&lt;B&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;More than you expect&lt;BR&gt;&lt;BR&gt;&lt;BR&gt;&lt;/B&gt;\n\n&lt;HR&gt;&lt;BR&gt;\n&lt;b&gt;Würth Elektronik eiSos GmbH &amp; Co. KG&lt;/b&gt;&lt;br&gt;\nEMC &amp; Inductive Solutions&lt;br&gt;\n\nMax-Eyth-Str.1&lt;br&gt;\nD-74638 Waldenburg&lt;br&gt;\n&lt;br&gt;\nTel: +49 (0)7942-945-0&lt;br&gt;\nFax:+49 (0)7942-945-405&lt;br&gt;\n&lt;br&gt;\n&lt;a href=\"http://www.we-online.com/eagle\"&gt;http://www.we-online.com/eagle&lt;/a&gt;&lt;br&gt;\n&lt;a href=\"mailto:libraries@we-online.com\"&gt;libraries@we-online.com&lt;/a&gt; &lt;BR&gt;&lt;BR&gt;\n&lt;br&gt;&lt;HR&gt;&lt;BR&gt;\nNeither CadSoft nor WE-eiSos does warrant that this library is error-free or &lt;br&gt;\nthat it meets your specific requirements.&lt;br&gt;&lt;BR&gt;\nPlease contact us for more information.&lt;br&gt;&lt;BR&gt;&lt;br&gt;\n&lt;hr&gt;\nEagle Version 6, Library Revision 2015b, 08.04.2015&lt;br&gt;\n&lt;HR&gt;\nCopyright: Würth Elektronik</description>\n<packages>\n<package name=\"68711014522\">\n<description>&lt;b&gt;WR-FPC 0.5mm SMT ZIF Horizontal Bottom Contact, 10 Pins</description>\n<wire x1=\"5.8\" y1=\"-4.1\" x2=\"5.8\" y2=\"1.5\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.8\" y1=\"1.5\" x2=\"-5.8\" y2=\"-4.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.8\" y1=\"1.5\" x2=\"-5.8\" y2=\"1.5\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.8\" y1=\"-4.1\" x2=\"5.8\" y2=\"-4.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.7\" y1=\"0.2\" x2=\"5.7\" y2=\"0.2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-5.7\" y1=\"-4.1\" x2=\"5.7\" y2=\"-4.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"5.7\" y1=\"0.2\" x2=\"5.7\" y2=\"-4.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-5.7\" y1=\"-4.1\" x2=\"-5.7\" y2=\"0.2\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"Z2\" x=\"4.18\" y=\"-1.38\" dx=\"2.7\" dy=\"3\" layer=\"1\"/>\n<smd name=\"Z1\" x=\"-4.18\" y=\"-1.38\" dx=\"2.7\" dy=\"3\" layer=\"1\"/>\n<smd name=\"1\" x=\"-2.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"-1.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"3\" x=\"-1.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"4\" x=\"-0.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"5\" x=\"-0.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"6\" x=\"0.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"7\" x=\"0.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"8\" x=\"1.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"9\" x=\"1.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"10\" x=\"2.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-2.944\" y=\"2.1101\" size=\"1.27\" layer=\"25\">&gt;NAME</text>\n<text x=\"-2.8\" y=\"-1.5\" size=\"1.27\" layer=\"51\">1</text>\n<text x=\"-3.329\" y=\"-5.7066\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n</package>\n</packages>\n</library>\n<library name=\"Microchip_By_element14_Batch_1\">\n<description>Developed by element14 :&lt;br&gt;\nelement14 CAD Library consolidation.ulp\nat 30/07/2012 11:22:31</description>\n<packages>\n<package name=\"SOT95P270X145-6N\">\n<smd name=\"1\" x=\"-1.2954\" y=\"0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"2\" x=\"-1.2954\" y=\"0\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"3\" x=\"-1.2954\" y=\"-0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"4\" x=\"1.2954\" y=\"-0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"5\" x=\"1.2954\" y=\"0\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"6\" x=\"1.2954\" y=\"0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<wire x1=\"-0.889\" y1=\"0.6858\" x2=\"-0.889\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"1.1938\" x2=\"-1.6002\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"1.1938\" x2=\"-1.6002\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"0.6858\" x2=\"-0.889\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-0.254\" x2=\"-0.889\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"0.254\" x2=\"-1.6002\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"0.254\" x2=\"-1.6002\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-0.254\" x2=\"-0.889\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-1.1938\" x2=\"-0.889\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-0.6858\" x2=\"-1.6002\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-0.6858\" x2=\"-1.6002\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-1.1938\" x2=\"-0.889\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-0.6858\" x2=\"0.889\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-1.1938\" x2=\"1.6002\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-1.1938\" x2=\"1.6002\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-0.6858\" x2=\"0.889\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"0.254\" x2=\"0.889\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-0.254\" x2=\"1.6002\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-0.254\" x2=\"1.6002\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"0.254\" x2=\"0.889\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"1.1938\" x2=\"0.889\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"0.6858\" x2=\"1.6002\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"0.6858\" x2=\"1.6002\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"1.1938\" x2=\"0.889\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-1.5494\" x2=\"0.889\" y2=\"-1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-1.5494\" x2=\"0.889\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"1.5494\" x2=\"0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.3048\" y1=\"1.5494\" x2=\"-0.889\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"1.5494\" x2=\"-0.889\" y2=\"-1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0\" layer=\"51\" curve=\"-180\"/>\n<text x=\"-2.1336\" y=\"1.3716\" size=\"1.27\" layer=\"51\" ratio=\"6\" rot=\"SR0\">*</text>\n<wire x1=\"-0.5588\" y1=\"-1.5494\" x2=\"0.5588\" y2=\"-1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.5588\" y1=\"1.5494\" x2=\"0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"-0.3048\" y1=\"1.5494\" x2=\"-0.5588\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0\" layer=\"21\" curve=\"-180\"/>\n<text x=\"-2.1336\" y=\"1.3716\" size=\"1.27\" layer=\"21\" ratio=\"6\" rot=\"SR0\">*</text>\n<text x=\"-4.699\" y=\"2.032\" size=\"2.0828\" layer=\"25\" ratio=\"10\" rot=\"SR0\">&gt;NAME</text>\n<text x=\"-5.5372\" y=\"-4.0386\" size=\"2.0828\" layer=\"27\" ratio=\"10\" rot=\"SR0\">&gt;VALUE</text>\n</package>\n</packages>\n</library>\n<library name=\"EMCComponents (rev19e)\">\n<description>&lt;BR&gt;Wurth Elektronik - EMC Components, Power Magnetics, Signal &amp; Communications&lt;br&gt;&lt;Hr&gt;\n&lt;BR&gt;&lt;BR&gt; \n&lt;TABLE BORDER=0 CELLSPACING=0 CELLPADDING=0&gt;\n&lt;TR&gt;   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;&lt;br&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt; &lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------------------------&lt;BR&gt;\n&lt;B&gt;&lt;I&gt;&lt;span style='font-size:26pt;\n  color:#FF6600;'&gt;WE &lt;/span&gt;&lt;/i&gt;&lt;/b&gt;\n&lt;BR&gt;\n      ---------------------------&lt;BR&gt;&lt;b&gt;Würth Elektronik&lt;/b&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n\n  &lt;TR&gt;\n    &lt;TD COLSPAN=7&gt;&amp;nbsp;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n  \n&lt;/TABLE&gt;\n&lt;B&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;More than you expect&lt;BR&gt;&lt;BR&gt;&lt;BR&gt;&lt;/B&gt;\n\n&lt;HR&gt;&lt;BR&gt;\n&lt;b&gt;Würth Elektronik eiSos GmbH &amp; Co. KG&lt;/b&gt;&lt;br&gt;\nEMC &amp; Inductive Solutions&lt;br&gt;\n\nMax-Eyth-Str.1&lt;br&gt;\nD-74638 Waldenburg&lt;br&gt;\n&lt;br&gt;\nTel: +49 (0)7942-945-0&lt;br&gt;\nFax:+49 (0)7942-945-5000&lt;br&gt;\n&lt;br&gt;\n&lt;a href=\"http://www.we-online.com/web/en/electronic_components/produkte_pb/bauteilebibliotheken/eagle_4.php\"&gt;www.we-online.com/eagle&lt;/a&gt;&lt;br&gt;\n&lt;a href=\"mailto:libraries@we-online.com\"&gt;libraries@we-online.com&lt;/a&gt; &lt;BR&gt;&lt;BR&gt;\n&lt;br&gt;&lt;HR&gt;&lt;BR&gt;\nNeither Autodesk nor Würth Elektronik eiSos does warrant that this library is error-free or &lt;br&gt;\nthat it meets your specific requirements.&lt;br&gt;&lt;BR&gt;\nPlease contact us for more information.&lt;br&gt;&lt;BR&gt;&lt;br&gt;\n\n&lt;HR&gt;\nEagle Version 6, Library Revision 2019e, 2019-06-27&lt;br&gt;\n\n&lt;HR&gt;\nCopyright: Würth Elektronik</description>\n<packages>\n<package name=\"WE-TPC_2811/2813_OLD\">\n<wire x1=\"-1.4\" y1=\"1.4\" x2=\"1.4\" y2=\"1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.4\" y1=\"1.4\" x2=\"1.4\" y2=\"-1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.4\" y1=\"-1.4\" x2=\"-1.4\" y2=\"-1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"-1.4\" x2=\"-1.4\" y2=\"1.4\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.1\" y=\"0\" dx=\"3.2\" dy=\"1\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"2\" x=\"1.1\" y=\"0\" dx=\"3.2\" dy=\"1\" layer=\"1\" rot=\"R90\"/>\n<text x=\"-1.56\" y=\"2.18\" size=\"0.6096\" layer=\"27\">&gt;VALUE</text>\n<text x=\"-0.21\" y=\"-2.6\" size=\"0.6096\" layer=\"25\" align=\"bottom-center\">&gt;NAME</text>\n<wire x1=\"-0.4\" y1=\"1.4\" x2=\"0.4\" y2=\"1.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-0.4\" y1=\"-1.4\" x2=\"0.4\" y2=\"-1.4\" width=\"0.127\" layer=\"21\"/>\n<polygon width=\"0.127\" layer=\"39\">\n<vertex x=\"-1.8\" y=\"1.8\"/>\n<vertex x=\"1.8\" y=\"1.8\"/>\n<vertex x=\"1.8\" y=\"-1.8\"/>\n<vertex x=\"-1.8\" y=\"-1.8\"/>\n</polygon>\n</package>\n</packages>\n</library>\n</libraries>\n<attributes>\n</attributes>\n<variantdefs>\n</variantdefs>\n<classes>\n<class number=\"0\" name=\"default\" width=\"0\" drill=\"0\">\n</class>\n</classes>\n<designrules name=\"oshpark-2layer *\">\n<description language=\"en\">&lt;b&gt;OSH Park Design Rules&lt;/b&gt;\n&lt;p&gt;\nPlease make sure your boards conform to these design rules.\n&lt;/p&gt;\n&lt;p&gt;\nNote, that not all DRC settings must be set by the manufacturer. Several can be adjusted for the design, including those listed on our docs page here. \n&lt;a href=&quot;http://docs.oshpark.com/design-tools/eagle/design-rules-files/&quot;&gt;Adjustable Settings&lt;/a&gt;\n&lt;/p&gt;</description>\n<param name=\"layerSetup\" value=\"(1*16)\"/>\n<param name=\"mtCopper\" value=\"0.035559375mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.035559375mm\"/>\n<param name=\"mtIsolate\" value=\"1.6mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm\"/>\n<param name=\"mdWireWire\" value=\"6mil\"/>\n<param name=\"mdWirePad\" value=\"6mil\"/>\n<param name=\"mdWireVia\" value=\"6mil\"/>\n<param name=\"mdPadPad\" value=\"6mil\"/>\n<param name=\"mdPadVia\" value=\"6mil\"/>\n<param name=\"mdViaVia\" value=\"6mil\"/>\n<param name=\"mdSmdPad\" value=\"6mil\"/>\n<param name=\"mdSmdVia\" value=\"6mil\"/>\n<param name=\"mdSmdSmd\" value=\"6mil\"/>\n<param name=\"mdViaViaSameLayer\" value=\"8mil\"/>\n<param name=\"mnLayersViaInSmd\" value=\"2\"/>\n<param name=\"mdCopperDimension\" value=\"15mil\"/>\n<param name=\"mdDrill\" value=\"6mil\"/>\n<param name=\"mdSmdStop\" value=\"0mil\"/>\n<param name=\"msWidth\" value=\"6mil\"/>\n<param name=\"msDrill\" value=\"10mil\"/>\n<param name=\"msMicroVia\" value=\"10mil\"/>\n<param name=\"msBlindViaRatio\" value=\"0.5\"/>\n<param name=\"rvPadTop\" value=\"0.25\"/>\n<param name=\"rvPadInner\" value=\"0.25\"/>\n<param name=\"rvPadBottom\" value=\"0.25\"/>\n<param name=\"rvViaOuter\" value=\"0.25\"/>\n<param name=\"rvViaInner\" value=\"0.25\"/>\n<param name=\"rvMicroViaOuter\" value=\"0.25\"/>\n<param name=\"rvMicroViaInner\" value=\"0.25\"/>\n<param name=\"rlMinPadTop\" value=\"5mil\"/>\n<param name=\"rlMaxPadTop\" value=\"20mil\"/>\n<param name=\"rlMinPadInner\" value=\"5mil\"/>\n<param name=\"rlMaxPadInner\" value=\"20mil\"/>\n<param name=\"rlMinPadBottom\" value=\"5mil\"/>\n<param name=\"rlMaxPadBottom\" value=\"20mil\"/>\n<param name=\"rlMinViaOuter\" value=\"5mil\"/>\n<param name=\"rlMaxViaOuter\" value=\"20mil\"/>\n<param name=\"rlMinViaInner\" value=\"5mil\"/>\n<param name=\"rlMaxViaInner\" value=\"20mil\"/>\n<param name=\"rlMinMicroViaOuter\" value=\"5mil\"/>\n<param name=\"rlMaxMicroViaOuter\" value=\"20mil\"/>\n<param name=\"rlMinMicroViaInner\" value=\"5mil\"/>\n<param name=\"rlMaxMicroViaInner\" value=\"20mil\"/>\n<param name=\"psTop\" value=\"-1\"/>\n<param name=\"psBottom\" value=\"-1\"/>\n<param name=\"psFirst\" value=\"-1\"/>\n<param name=\"psElongationLong\" value=\"100\"/>\n<param name=\"psElongationOffset\" value=\"100\"/>\n<param name=\"mvStopFrame\" value=\"1\"/>\n<param name=\"mvCreamFrame\" value=\"0\"/>\n<param name=\"mlMinStopFrame\" value=\"2.5mil\"/>\n<param name=\"mlMaxStopFrame\" value=\"2.5mil\"/>\n<param name=\"mlMinCreamFrame\" value=\"0mil\"/>\n<param name=\"mlMaxCreamFrame\" value=\"0mil\"/>\n<param name=\"mlViaStopLimit\" value=\"43mil\"/>\n<param name=\"srRoundness\" value=\"0\"/>\n<param name=\"srMinRoundness\" value=\"0mil\"/>\n<param name=\"srMaxRoundness\" value=\"0mil\"/>\n<param name=\"slThermalIsolate\" value=\"10mil\"/>\n<param name=\"slThermalsForVias\" value=\"0\"/>\n<param name=\"dpMaxLengthDifference\" value=\"10mm\"/>\n<param name=\"dpGapFactor\" value=\"2.5\"/>\n<param name=\"checkGrid\" value=\"0\"/>\n<param name=\"checkAngle\" value=\"0\"/>\n<param name=\"checkFont\" value=\"1\"/>\n<param name=\"checkRestrict\" value=\"1\"/>\n<param name=\"useDiameter\" value=\"13\"/>\n<param name=\"maxErrors\" value=\"50\"/>\n</designrules>\n<autorouter>\n<pass name=\"Default\">\n<param name=\"RoutingGrid\" value=\"50mil\"/>\n<param name=\"AutoGrid\" value=\"1\"/>\n<param name=\"Efforts\" value=\"0\"/>\n<param name=\"TopRouterVariant\" value=\"1\"/>\n<param name=\"tpViaShape\" value=\"round\"/>\n<param name=\"PrefDir.1\" value=\"a\"/>\n<param name=\"PrefDir.2\" value=\"0\"/>\n<param name=\"PrefDir.3\" value=\"0\"/>\n<param name=\"PrefDir.4\" value=\"0\"/>\n<param name=\"PrefDir.5\" value=\"0\"/>\n<param name=\"PrefDir.6\" value=\"0\"/>\n<param name=\"PrefDir.7\" value=\"0\"/>\n<param name=\"PrefDir.8\" value=\"0\"/>\n<param name=\"PrefDir.9\" value=\"0\"/>\n<param name=\"PrefDir.10\" value=\"0\"/>\n<param name=\"PrefDir.11\" value=\"0\"/>\n<param name=\"PrefDir.12\" value=\"0\"/>\n<param name=\"PrefDir.13\" value=\"0\"/>\n<param name=\"PrefDir.14\" value=\"0\"/>\n<param name=\"PrefDir.15\" value=\"0\"/>\n<param name=\"PrefDir.16\" value=\"a\"/>\n<param name=\"cfVia\" value=\"8\"/>\n<param name=\"cfNonPref\" value=\"5\"/>\n<param name=\"cfChangeDir\" value=\"2\"/>\n<param name=\"cfOrthStep\" value=\"2\"/>\n<param name=\"cfDiagStep\" value=\"3\"/>\n<param name=\"cfExtdStep\" value=\"0\"/>\n<param name=\"cfBonusStep\" value=\"1\"/>\n<param name=\"cfMalusStep\" value=\"1\"/>\n<param name=\"cfPadImpact\" value=\"4\"/>\n<param name=\"cfSmdImpact\" value=\"4\"/>\n<param name=\"cfBusImpact\" value=\"0\"/>\n<param name=\"cfHugging\" value=\"3\"/>\n<param name=\"cfAvoid\" value=\"4\"/>\n<param name=\"cfPolygon\" value=\"10\"/>\n<param name=\"cfBase.1\" value=\"0\"/>\n<param name=\"cfBase.2\" value=\"1\"/>\n<param name=\"cfBase.3\" value=\"1\"/>\n<param name=\"cfBase.4\" value=\"1\"/>\n<param name=\"cfBase.5\" value=\"1\"/>\n<param name=\"cfBase.6\" value=\"1\"/>\n<param name=\"cfBase.7\" value=\"1\"/>\n<param name=\"cfBase.8\" value=\"1\"/>\n<param name=\"cfBase.9\" value=\"1\"/>\n<param name=\"cfBase.10\" value=\"1\"/>\n<param name=\"cfBase.11\" value=\"1\"/>\n<param name=\"cfBase.12\" value=\"1\"/>\n<param name=\"cfBase.13\" value=\"1\"/>\n<param name=\"cfBase.14\" value=\"1\"/>\n<param name=\"cfBase.15\" value=\"1\"/>\n<param name=\"cfBase.16\" value=\"0\"/>\n<param name=\"mnVias\" value=\"20\"/>\n<param name=\"mnSegments\" value=\"9999\"/>\n<param name=\"mnExtdSteps\" value=\"9999\"/>\n<param name=\"mnRipupLevel\" value=\"10\"/>\n<param name=\"mnRipupSteps\" value=\"100\"/>\n<param name=\"mnRipupTotal\" value=\"100\"/>\n</pass>\n<pass name=\"Follow-me\" refer=\"Default\" active=\"yes\">\n</pass>\n<pass name=\"Busses\" refer=\"Default\" active=\"yes\">\n<param name=\"cfNonPref\" value=\"4\"/>\n<param name=\"cfBusImpact\" value=\"4\"/>\n<param name=\"cfHugging\" value=\"0\"/>\n<param name=\"mnVias\" value=\"0\"/>\n</pass>\n<pass name=\"Route\" refer=\"Default\" active=\"yes\">\n</pass>\n<pass name=\"Optimize1\" refer=\"Default\" active=\"yes\">\n<param name=\"cfVia\" value=\"99\"/>\n<param name=\"cfExtdStep\" value=\"10\"/>\n<param name=\"cfHugging\" value=\"1\"/>\n<param name=\"mnExtdSteps\" value=\"1\"/>\n<param name=\"mnRipupLevel\" value=\"0\"/>\n</pass>\n<pass name=\"Optimize2\" refer=\"Optimize1\" active=\"yes\">\n<param name=\"cfNonPref\" value=\"0\"/>\n<param name=\"cfChangeDir\" value=\"6\"/>\n<param name=\"cfExtdStep\" value=\"0\"/>\n<param name=\"cfBonusStep\" value=\"2\"/>\n<param name=\"cfMalusStep\" value=\"2\"/>\n<param name=\"cfPadImpact\" value=\"2\"/>\n<param name=\"cfSmdImpact\" value=\"2\"/>\n<param name=\"cfHugging\" value=\"0\"/>\n</pass>\n<pass name=\"Optimize3\" refer=\"Optimize2\" active=\"yes\">\n<param name=\"cfChangeDir\" value=\"8\"/>\n<param name=\"cfPadImpact\" value=\"0\"/>\n<param name=\"cfSmdImpact\" value=\"0\"/>\n</pass>\n<pass name=\"Optimize4\" refer=\"Optimize3\" active=\"yes\">\n<param name=\"cfChangeDir\" value=\"25\"/>\n</pass>\n</autorouter>\n<elements>\n<element name=\"S1\" library=\"SparkFun-Electromechanical\" package=\"JOYSTICK_MINI\" value=\"5-WAY-TACTILE-SWITCH\" x=\"13\" y=\"5.5\" smashed=\"yes\" rot=\"R315\"/>\n<element name=\"SW1\" library=\"microbuilder\" package=\"EVQ-Q2_SMALLER\" value=\"EVQQ\" x=\"44.865\" y=\"5.5\" smashed=\"yes\"/>\n<element name=\"SW2\" library=\"microbuilder\" package=\"EVQ-Q2_SMALLER\" value=\"EVQQ\" x=\"56.5\" y=\"5.5\" smashed=\"yes\"/>\n<element name=\"U2\" library=\"SparkFun-RF\" package=\"ESP-WROOM-32\" value=\"ESP-WROOM-32\" x=\"31.92\" y=\"39.27\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"IC-13849\" x=\"31.92\" y=\"39.27\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"R8\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"43.815\" y=\"43.815\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"25.815\" y=\"43.815\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"C5\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"10uF\" x=\"43.18\" y=\"46.355\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-11015\" x=\"39.18\" y=\"34.355\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"C3\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"44.7675\" y=\"46.355\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"36.7675\" y=\"40.355\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"C2\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"46.6725\" y=\"43.18\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"34.6725\" y=\"43.18\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"R17\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"50.4825\" y=\"36.5125\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"50.4825\" y=\"32.5125\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"R18\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"50.4825\" y=\"41.275\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"50.4825\" y=\"45.275\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"Q2\" library=\"esp32-thing-temp\" package=\"SC70-6\" value=\"MBT3904DW1T1\" x=\"49.8475\" y=\"39.0525\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"TRANS-13337\" x=\"46.8475\" y=\"33.0525\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"U1\" library=\"SparkFun-PowerIC\" package=\"SOT23-5\" value=\"MCP73831\" x=\"55.245\" y=\"48.895\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"IC-09995\" x=\"59.245\" y=\"72.895\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C6\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"4.7uF\" x=\"54.61\" y=\"45.72\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"CAP-08280\" x=\"42.61\" y=\"29.72\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"JP2\" library=\"SparkFun-Connectors\" package=\"JST-2-PTH\" value=\"LiPo\" x=\"46.015\" y=\"51.81\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CONN-09863\" x=\"50.015\" y=\"47.81\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n<attribute name=\"SKU\" value=\"PRT-09914\" x=\"50.015\" y=\"47.81\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"R6\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"3.9k\" x=\"51.435\" y=\"52.07\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"RES-08296\" x=\"38.435\" y=\"53.07\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"C19\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"4.7uF\" x=\"51.435\" y=\"50.4825\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-08280\" x=\"72.435\" y=\"38.4825\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C11\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"54.2925\" y=\"26.9875\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"75.2925\" y=\"12.9875\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"C14\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"48.26\" y=\"19.05\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"54.26\" y=\"41.05\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"U4\" library=\"SparkFun-DigitalIC\" package=\"SSOP20_L\" value=\"FT231XS\" x=\"48.26\" y=\"23.495\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"IC-11524\" x=\"27.26\" y=\"20.495\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"R13\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"27\" x=\"55.245\" y=\"23.1775\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"RES-09334\" x=\"82.245\" y=\"45.1775\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"R14\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"27\" x=\"55.245\" y=\"21.9075\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"RES-09334\" x=\"64.245\" y=\"43.9075\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C13\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"47pF\" x=\"55.245\" y=\"20.6375\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-08913\" x=\"64.245\" y=\"30.6375\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C12\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"47pF\" x=\"55.245\" y=\"24.4475\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-08913\" x=\"84.245\" y=\"25.4475\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C16\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"47.9425\" y=\"27.94\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"26.9425\" y=\"25.94\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"F1\" library=\"SparkFun-PowerIC\" package=\"PTC-1206\" value=\"500mA\" x=\"56.515\" y=\"27.305\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"RES-11150\" x=\"49.515\" y=\"-3.695\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"JP15\" library=\"SparkFun-Connectors\" package=\"USB-B-MICRO-SMD_V03\" value=\"\" x=\"62.105\" y=\"23.39\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CONN-11752\" x=\"87.105\" y=\"10.39\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n<attribute name=\"VALUE\" x=\"63.375\" y=\"28.851\" size=\"0.4064\" layer=\"28\" rot=\"MR0\"/>\n</element>\n<element name=\"C15\" library=\"SparkFun-Capacitors\" package=\"0603-CAP\" value=\"4.7uF\" x=\"52.07\" y=\"19.05\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"CAP-08280\" x=\"18.07\" y=\"13.05\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"C7\" library=\"SparkFun-Capacitors\" package=\"0805\" value=\"1.0uF\" x=\"55.88\" y=\"34.925\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-11625\" x=\"84.88\" y=\"30.925\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"D3\" library=\"SparkFun-DiscreteSemi\" package=\"SOD-323\" value=\"BAT20J\" x=\"60.96\" y=\"33.02\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"DIO-11623\" x=\"23.96\" y=\"42.02\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"R7\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"60.96\" y=\"38.1\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"28.96\" y=\"43.1\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"Q1\" library=\"SparkFun-DiscreteSemi\" package=\"SOT23-3\" value=\"2.5A/30V\" x=\"60.96\" y=\"35.56\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"TRANS-11308\" x=\"122.96\" y=\"16.56\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n<attribute name=\"VALUE\" x=\"61.976\" y=\"35.3695\" size=\"0.4064\" layer=\"28\" rot=\"MR0\"/>\n</element>\n<element name=\"R10\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"470k\" x=\"43.4975\" y=\"39.37\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"56.4975\" y=\"89.37\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"R11\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"470k\" x=\"45.085\" y=\"39.37\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"28.085\" y=\"-16.63\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"S2\" library=\"SparkFun-Electromechanical\" package=\"SWITCH-SPST-SMD-A\" value=\"\" x=\"61.635\" y=\"44.89\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"SWCH-10651\" x=\"24.635\" y=\"-0.11\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n<attribute name=\"VALUE\" x=\"60.365\" y=\"43.62\" size=\"0.6096\" layer=\"28\" rot=\"MR90\"/>\n</element>\n<element name=\"K1\" library=\"Eagle_FPC_CONNECTOR_AND_FFC_CAB_rev15c\" package=\"68711014522\" value=\"68711014522\" x=\"32\" y=\"17\" smashed=\"yes\" rot=\"MR0\"/>\n<element name=\"R1\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"0\" x=\"57.15\" y=\"33.02\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"57.15\" y=\"33.02\" size=\"1.778\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"R3\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"0\" x=\"40.64\" y=\"25.4\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"40.64\" y=\"25.4\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"C1\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"4.7uF\" x=\"45.085\" y=\"15.875\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"CAP-08913\" x=\"45.085\" y=\"15.875\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"C8\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"10uF\" x=\"42.8625\" y=\"18.415\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-08913\" x=\"42.8625\" y=\"18.415\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C4\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"40.64\" y=\"20.0025\" smashed=\"yes\" rot=\"MR180\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"40.64\" y=\"20.0025\" size=\"0.3048\" layer=\"28\" rot=\"MR180\" display=\"off\"/>\n</element>\n<element name=\"C10\" library=\"SparkFun-Capacitors\" package=\"0805\" value=\"2.2uF\" x=\"55.88\" y=\"41.5925\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"CAP-11625\" x=\"55.88\" y=\"41.5925\" size=\"0.3048\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"U3\" library=\"SparkFun-PowerIC\" package=\"SOT23-5\" value=\"AP2112K-3.3V\" x=\"55.88\" y=\"38.735\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"VREG-12457\" x=\"59.69\" y=\"46.355\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"R2\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"43.815\" y=\"32.385\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"43.815\" y=\"32.385\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"R4\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"10k\" x=\"47.3075\" y=\"35.2425\" smashed=\"yes\" rot=\"MR0\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"47.3075\" y=\"35.2425\" size=\"1.778\" layer=\"28\" rot=\"MR0\" display=\"off\"/>\n</element>\n<element name=\"C9\" library=\"SparkFun-Capacitors\" package=\"0603\" value=\"0.1uF\" x=\"46.6725\" y=\"39.37\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\" x=\"46.6725\" y=\"39.37\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"U$1\" library=\"Microchip_By_element14_Batch_1\" package=\"SOT95P270X145-6N\" value=\"MCP1640CT-I/CHY\" x=\"42.545\" y=\"15.24\" smashed=\"yes\" rot=\"MR90\">\n<attribute name=\"OC_FARNELL\" value=\"1800208\" x=\"42.545\" y=\"15.24\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n<attribute name=\"MPN\" value=\"MCP1640CT-I/CHY\" x=\"42.545\" y=\"15.24\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n<attribute name=\"PACKAGE\" value=\"SOT-6\" x=\"42.545\" y=\"15.24\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n<attribute name=\"OC_NEWARK\" value=\"73R3626\" x=\"42.545\" y=\"15.24\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n<attribute name=\"SUPPLIER\" value=\"Microchip\" x=\"42.545\" y=\"15.24\" size=\"1.778\" layer=\"28\" rot=\"MR90\" display=\"off\"/>\n</element>\n<element name=\"L1\" library=\"EMCComponents (rev19e)\" package=\"WE-TPC_2811/2813_OLD\" value=\"4.7µH\" x=\"48.895\" y=\"14.9225\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"WE-NUMBER\" value=\"744029004/4,7uH\" x=\"48.895\" y=\"14.9225\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n<attribute name=\"VALUE\" x=\"46.715\" y=\"16.4825\" size=\"0.6096\" layer=\"28\" rot=\"MR270\"/>\n</element>\n<element name=\"R5\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"976k\" x=\"40.005\" y=\"17.4625\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"40.005\" y=\"17.4625\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n<element name=\"R9\" library=\"SparkFun-Resistors\" package=\"0603\" value=\"309k\" x=\"40.005\" y=\"14.2875\" smashed=\"yes\" rot=\"MR270\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\" x=\"40.005\" y=\"14.2875\" size=\"1.778\" layer=\"28\" rot=\"MR270\" display=\"off\"/>\n</element>\n</elements>\n<signals>\n<signal name=\"GND\">\n<contactref element=\"U2\" pad=\"GND\"/>\n<contactref element=\"U2\" pad=\"38\"/>\n<contactref element=\"U2\" pad=\"15\"/>\n<contactref element=\"U2\" pad=\"1\"/>\n<contactref element=\"C2\" pad=\"2\"/>\n<contactref element=\"C3\" pad=\"2\"/>\n<contactref element=\"C5\" pad=\"2\"/>\n<contactref element=\"U1\" pad=\"2\"/>\n<contactref element=\"C6\" pad=\"2\"/>\n<contactref element=\"JP2\" pad=\"1\"/>\n<contactref element=\"R6\" pad=\"1\"/>\n<contactref element=\"C19\" pad=\"2\"/>\n<contactref element=\"C11\" pad=\"2\"/>\n<contactref element=\"JP15\" pad=\"GND\"/>\n<contactref element=\"C13\" pad=\"2\"/>\n<contactref element=\"C12\" pad=\"2\"/>\n<contactref element=\"U4\" pad=\"16\"/>\n<contactref element=\"U4\" pad=\"6\"/>\n<contactref element=\"C16\" pad=\"2\"/>\n<contactref element=\"C15\" pad=\"2\"/>\n<contactref element=\"C14\" pad=\"2\"/>\n<contactref element=\"C7\" pad=\"2\"/>\n<contactref element=\"R7\" pad=\"1\"/>\n<contactref element=\"R11\" pad=\"1\"/>\n<contactref element=\"JP15\" pad=\"SHIELD2\"/>\n<contactref element=\"JP15\" pad=\"SHIELD3\"/>\n<contactref element=\"JP15\" pad=\"SHIELD1\"/>\n<contactref element=\"K1\" pad=\"10\"/>\n<contactref element=\"K1\" pad=\"9\"/>\n<wire x1=\"29.75\" y1=\"17.6\" x2=\"30.25\" y2=\"17.6\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"S1\" pad=\"GND\"/>\n<wire x1=\"59.38\" y1=\"22.09\" x2=\"61.46\" y2=\"22.09\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"61.46\" y1=\"22.09\" x2=\"62.23\" y2=\"22.86\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"62.23\" y1=\"22.86\" x2=\"62.23\" y2=\"23.265\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"62.23\" y1=\"23.265\" x2=\"62.105\" y2=\"23.39\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"62.105\" y1=\"27.075\" x2=\"62.105\" y2=\"23.39\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"62.105\" y1=\"23.39\" x2=\"62.105\" y2=\"19.705\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"40.92\" y1=\"46.97\" x2=\"42.945\" y2=\"46.97\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"42.945\" y1=\"46.97\" x2=\"43.18\" y2=\"47.205\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"43.18\" y1=\"47.205\" x2=\"44.7675\" y2=\"47.205\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"C4\" pad=\"2\"/>\n<contactref element=\"C10\" pad=\"2\"/>\n<polygon width=\"0.508\" layer=\"1\" isolate=\"0.254\">\n<vertex x=\"-1\" y=\"56\"/>\n<vertex x=\"21\" y=\"56\"/>\n<vertex x=\"21\" y=\"47.135\"/>\n<vertex x=\"43\" y=\"47.135\"/>\n<vertex x=\"43\" y=\"56\"/>\n<vertex x=\"65\" y=\"56\"/>\n<vertex x=\"65\" y=\"11\"/>\n<vertex x=\"-1\" y=\"11\"/>\n</polygon>\n<via x=\"29.845\" y=\"41.275\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"44.7675\" y=\"48.5775\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"50.585\" y1=\"52.07\" x2=\"50.585\" y2=\"50.4825\" width=\"0.508\" layer=\"16\"/>\n<via x=\"59.3725\" y=\"39.37\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"60.11\" y1=\"38.1\" x2=\"59.3725\" y2=\"38.8375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"59.3725\" y1=\"38.8375\" x2=\"59.3725\" y2=\"39.37\" width=\"0.508\" layer=\"16\"/>\n<via x=\"53.6575\" y=\"34.925\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"22.92\" y1=\"46.97\" x2=\"40.92\" y2=\"46.97\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"22.92\" y1=\"46.97\" x2=\"20.34\" y2=\"46.97\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"20.34\" y1=\"46.97\" x2=\"20.32\" y2=\"46.99\" width=\"0.508\" layer=\"16\"/>\n<via x=\"20.32\" y=\"46.99\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"37.635\" y1=\"28.97\" x2=\"37.635\" y2=\"27.4525\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"37.635\" y1=\"27.4525\" x2=\"37.7825\" y2=\"27.305\" width=\"0.508\" layer=\"16\"/>\n<via x=\"37.7825\" y=\"27.305\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"29.75\" y1=\"17.6\" x2=\"29.75\" y2=\"19.145\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"29.75\" y1=\"19.145\" x2=\"28.575\" y2=\"20.32\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"28.575\" y=\"20.32\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"48.5775\" y1=\"26.1747\" x2=\"48.5775\" y2=\"27.725\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"48.5775\" y1=\"27.725\" x2=\"48.7925\" y2=\"27.94\" width=\"0.4064\" layer=\"16\"/>\n<via x=\"24.765\" y=\"17.145\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"61.9125\" y=\"19.685\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"61.9125\" y=\"23.495\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"61.9125\" y=\"26.9875\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"47.9425\" y1=\"20.8153\" x2=\"47.9425\" y2=\"19.5825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.9425\" y1=\"19.5825\" x2=\"47.41\" y2=\"19.05\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"54.395\" y1=\"20.6375\" x2=\"54.395\" y2=\"20.525\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"59.38\" y1=\"22.09\" x2=\"58.92\" y2=\"22.09\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.92\" y1=\"22.09\" x2=\"58.7375\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.7375\" y1=\"21.9075\" x2=\"58.1025\" y2=\"21.2725\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"58.1025\" y1=\"21.2725\" x2=\"58.1025\" y2=\"20.0025\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"58.1025\" y1=\"20.0025\" x2=\"57.15\" y2=\"19.05\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.15\" y1=\"19.05\" x2=\"52.92\" y2=\"19.05\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"52.92\" y1=\"19.05\" x2=\"52.92\" y2=\"19.9\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"52.92\" y1=\"19.9\" x2=\"53.6575\" y2=\"20.6375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.395\" y1=\"20.6375\" x2=\"53.6575\" y2=\"20.6375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.2925\" y1=\"27.8375\" x2=\"55.03\" y2=\"27.8375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.03\" y1=\"27.8375\" x2=\"55.5625\" y2=\"27.305\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.5625\" y1=\"27.305\" x2=\"61.595\" y2=\"27.305\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"61.595\" y1=\"27.305\" x2=\"61.9125\" y2=\"26.9875\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.2925\" y1=\"27.8375\" x2=\"53.2375\" y2=\"27.8375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.2375\" y1=\"27.8375\" x2=\"53.0225\" y2=\"27.6225\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.0225\" y1=\"27.6225\" x2=\"53.0225\" y2=\"25.0825\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.0225\" y1=\"25.0825\" x2=\"53.6575\" y2=\"24.4475\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.6575\" y1=\"24.4475\" x2=\"54.395\" y2=\"24.4475\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"48.7925\" y1=\"27.94\" x2=\"50.165\" y2=\"27.94\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"50.165\" y1=\"27.94\" x2=\"52.07\" y2=\"29.845\" width=\"0.508\" layer=\"16\"/>\n<via x=\"52.07\" y=\"29.845\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"55.46\" y1=\"45.72\" x2=\"56.515\" y2=\"45.72\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"45.72\" x2=\"56.8325\" y2=\"45.4025\" width=\"0.508\" layer=\"16\"/>\n<via x=\"56.8325\" y=\"45.4025\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"48.895\" y=\"44.1325\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"31.92\" y1=\"39.27\" x2=\"31.82\" y2=\"39.37\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"31.82\" y1=\"39.37\" x2=\"31.75\" y2=\"39.37\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"61.9125\" y1=\"19.685\" x2=\"61.9325\" y2=\"19.705\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"61.9325\" y1=\"19.705\" x2=\"62.105\" y2=\"19.705\" width=\"0.254\" layer=\"16\"/>\n<via x=\"29.845\" y=\"37.465\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"33.655\" y=\"37.465\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"33.655\" y=\"41.275\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"31.75\" y=\"39.37\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"28.575\" y=\"46.99\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"34.925\" y=\"46.99\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"57.15\" y=\"19.05\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"50.165\" y=\"17.78\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"55.5625\" y=\"27.305\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"15.351128125\" y1=\"3.14886875\" x2=\"16.277496875\" y2=\"2.2225\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"16.277496875\" y1=\"2.2225\" x2=\"17.145\" y2=\"2.2225\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"17.145\" y1=\"2.2225\" x2=\"18.415\" y2=\"3.4925\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"18.415\" y1=\"3.4925\" x2=\"18.415\" y2=\"13.97\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"52.92\" y1=\"19.05\" x2=\"52.92\" y2=\"18.3125\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"52.92\" y1=\"18.3125\" x2=\"52.3875\" y2=\"17.78\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.245\" y1=\"47.5949\" x2=\"55.245\" y2=\"45.935\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.245\" y1=\"45.935\" x2=\"55.46\" y2=\"45.72\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"U3\" pad=\"2\"/>\n<wire x1=\"54.98\" y1=\"34.925\" x2=\"53.6575\" y2=\"34.925\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.98\" y1=\"41.5925\" x2=\"53.975\" y2=\"41.5925\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.975\" y1=\"41.5925\" x2=\"53.6575\" y2=\"41.275\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.6575\" y1=\"41.275\" x2=\"53.6575\" y2=\"34.925\" width=\"0.508\" layer=\"16\"/>\n<via x=\"53.6575\" y=\"41.275\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"54.98\" y1=\"34.925\" x2=\"54.98\" y2=\"35.295\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.88\" y1=\"37.4349\" x2=\"55.88\" y2=\"36.195\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.88\" y1=\"36.195\" x2=\"54.98\" y2=\"35.295\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"C9\" pad=\"1\"/>\n<wire x1=\"46.6725\" y1=\"38.52\" x2=\"45.085\" y2=\"38.52\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"U$1\" pad=\"2\"/>\n<contactref element=\"C8\" pad=\"1\"/>\n<contactref element=\"C1\" pad=\"2\"/>\n<wire x1=\"42.545\" y1=\"13.9446\" x2=\"42.545\" y2=\"12.7\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"42.545\" y=\"12.7\" extent=\"1-16\" drill=\"0.5\"/>\n<contactref element=\"R2\" pad=\"1\"/>\n<contactref element=\"R4\" pad=\"1\"/>\n<via x=\"46.355\" y=\"14.9225\" extent=\"1-16\" drill=\"0.5\"/>\n<contactref element=\"R9\" pad=\"2\"/>\n<via x=\"42.8625\" y=\"20.0025\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"40.005\" y1=\"13.4375\" x2=\"40.005\" y2=\"13.335\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.005\" y1=\"13.335\" x2=\"40.64\" y2=\"12.7\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.64\" y1=\"12.7\" x2=\"42.545\" y2=\"12.7\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.41\" y1=\"19.05\" x2=\"47.41\" y2=\"18.3125\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"47.41\" y1=\"18.3125\" x2=\"47.9425\" y2=\"17.78\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"47.9425\" y1=\"17.78\" x2=\"50.165\" y2=\"17.78\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"52.3875\" y1=\"17.78\" x2=\"50.165\" y2=\"17.78\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"43.7125\" y1=\"18.415\" x2=\"43.7125\" y2=\"19.1525\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"43.7125\" y1=\"19.1525\" x2=\"42.8625\" y2=\"20.0025\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"41.49\" y1=\"20.0025\" x2=\"42.8625\" y2=\"20.0025\" width=\"0.508\" layer=\"16\"/>\n<via x=\"47.625\" y=\"37.465\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"48.895\" y1=\"44.1325\" x2=\"46.775\" y2=\"44.1325\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"46.775\" y1=\"44.1325\" x2=\"46.6725\" y2=\"44.03\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"46.6725\" y1=\"38.52\" x2=\"47.625\" y2=\"37.465\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"44.7675\" y1=\"48.5775\" x2=\"44.7675\" y2=\"46.99\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"46.355\" y1=\"14.9225\" x2=\"45.1875\" y2=\"14.9225\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"45.1875\" y1=\"14.9225\" x2=\"45.085\" y2=\"15.025\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"50.585\" y1=\"52.07\" x2=\"47.275\" y2=\"52.07\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"47.275\" y1=\"52.07\" x2=\"47.015\" y2=\"51.81\" width=\"0.508\" layer=\"16\"/>\n<via x=\"43.4975\" y=\"30.1625\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"48.1575\" y1=\"35.2425\" x2=\"48.1575\" y2=\"34.075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.1575\" y1=\"34.075\" x2=\"48.26\" y2=\"33.9725\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"48.26\" y=\"33.9725\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"43.815\" y1=\"31.535\" x2=\"43.815\" y2=\"30.48\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.815\" y1=\"30.48\" x2=\"43.4975\" y2=\"30.1625\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"3.3V\">\n<contactref element=\"R8\" pad=\"2\"/>\n<contactref element=\"U2\" pad=\"2\"/>\n<contactref element=\"C3\" pad=\"1\"/>\n<contactref element=\"C5\" pad=\"1\"/>\n<contactref element=\"R3\" pad=\"2\"/>\n<wire x1=\"40.92\" y1=\"45.7\" x2=\"42.985\" y2=\"45.7\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"42.985\" y1=\"45.7\" x2=\"43.18\" y2=\"45.505\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"43.18\" y1=\"45.505\" x2=\"44.7675\" y2=\"45.505\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"44.665\" y1=\"43.815\" x2=\"44.665\" y2=\"45.29\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.665\" y1=\"45.29\" x2=\"44.7675\" y2=\"45.505\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"C10\" pad=\"1\"/>\n<wire x1=\"44.7675\" y1=\"45.505\" x2=\"50.38\" y2=\"45.505\" width=\"0.508\" layer=\"16\"/>\n<via x=\"40.64\" y=\"27.6225\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"40.64\" y1=\"27.6225\" x2=\"40.64\" y2=\"26.25\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"U3\" pad=\"5\"/>\n<wire x1=\"52.705\" y1=\"43.18\" x2=\"50.38\" y2=\"45.505\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.83\" y1=\"40.0351\" x2=\"56.83\" y2=\"41.5425\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.83\" y1=\"41.5425\" x2=\"56.78\" y2=\"41.5925\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.78\" y1=\"41.5925\" x2=\"56.78\" y2=\"42.5975\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.78\" y1=\"42.5975\" x2=\"56.1975\" y2=\"43.18\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.1975\" y1=\"43.18\" x2=\"52.705\" y2=\"43.18\" width=\"0.508\" layer=\"16\"/>\n<contactref element=\"SW1\" pad=\"A\"/>\n<contactref element=\"SW1\" pad=\"A'\"/>\n<contactref element=\"SW2\" pad=\"A\"/>\n<contactref element=\"SW2\" pad=\"A'\"/>\n<wire x1=\"41.765\" y1=\"3.5\" x2=\"47.965\" y2=\"3.5\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"47.965\" y1=\"3.5\" x2=\"51.544709375\" y2=\"3.5\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"51.544709375\" y1=\"3.5\" x2=\"53.4\" y2=\"3.5\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"59.6\" y1=\"3.5\" x2=\"53.4\" y2=\"3.5\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"51.544709375\" y1=\"3.5\" x2=\"51.544709375\" y2=\"9.317209375\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"51.544709375\" y1=\"9.317209375\" x2=\"52.705\" y2=\"10.4775\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"52.705\" y1=\"10.4775\" x2=\"52.705\" y2=\"26.035\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"52.705\" y1=\"26.035\" x2=\"46.6725\" y2=\"32.0675\" width=\"0.3048\" layer=\"1\"/>\n<via x=\"46.6725\" y=\"32.0675\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"46.6725\" y1=\"32.0675\" x2=\"42.2275\" y2=\"27.6225\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.2275\" y1=\"27.6225\" x2=\"40.64\" y2=\"27.6225\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"37.465\" y=\"34.29\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"40.92\" y1=\"45.7\" x2=\"39.35\" y2=\"45.7\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"39.35\" y1=\"45.7\" x2=\"37.465\" y2=\"43.815\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"37.465\" y1=\"34.29\" x2=\"37.465\" y2=\"43.815\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"40.64\" y1=\"27.6225\" x2=\"40.64\" y2=\"31.115\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"40.64\" y1=\"31.115\" x2=\"37.465\" y2=\"34.29\" width=\"0.508\" layer=\"1\"/>\n</signal>\n<signal name=\"RESET\">\n<contactref element=\"R8\" pad=\"1\"/>\n<contactref element=\"C2\" pad=\"1\"/>\n<contactref element=\"U2\" pad=\"3\"/>\n<contactref element=\"Q2\" pad=\"3\"/>\n<wire x1=\"42.35\" y1=\"44.43\" x2=\"42.965\" y2=\"43.815\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.92\" y1=\"44.43\" x2=\"42.35\" y2=\"44.43\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.965\" y1=\"43.815\" x2=\"43.6\" y2=\"43.0775\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.6\" y1=\"43.0775\" x2=\"44.45\" y2=\"42.2275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.45\" y1=\"42.2275\" x2=\"46.14\" y2=\"42.2275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.14\" y1=\"42.2275\" x2=\"46.6725\" y2=\"42.33\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.9275\" y1=\"39.7025\" x2=\"48.5625\" y2=\"39.7025\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.5625\" y1=\"39.7025\" x2=\"48.26\" y2=\"40.005\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.26\" y1=\"40.005\" x2=\"48.26\" y2=\"41.275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.26\" y1=\"41.275\" x2=\"47.3075\" y2=\"42.2275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.3075\" y1=\"42.2275\" x2=\"46.775\" y2=\"42.2275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.775\" y1=\"42.2275\" x2=\"46.6725\" y2=\"42.33\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"ADC_BAT\">\n<contactref element=\"R10\" pad=\"1\"/>\n<contactref element=\"R11\" pad=\"2\"/>\n<contactref element=\"U2\" pad=\"5\"/>\n<contactref element=\"C9\" pad=\"2\"/>\n<wire x1=\"43.4975\" y1=\"40.22\" x2=\"45.085\" y2=\"40.22\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.6725\" y1=\"40.22\" x2=\"45.085\" y2=\"40.22\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.4975\" y1=\"40.22\" x2=\"43.4975\" y2=\"40.3225\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.4975\" y1=\"40.3225\" x2=\"41.91\" y2=\"41.91\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"41.91\" y1=\"41.91\" x2=\"40.94\" y2=\"41.91\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.94\" y1=\"41.91\" x2=\"40.92\" y2=\"41.89\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"TXD\">\n<contactref element=\"U4\" pad=\"4\"/>\n<contactref element=\"U2\" pad=\"35\"/>\n<wire x1=\"47.3075\" y1=\"26.1747\" x2=\"47.3075\" y2=\"25.0825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.3075\" y1=\"25.0825\" x2=\"47.625\" y2=\"24.765\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"47.625\" y=\"24.765\" extent=\"1-16\" drill=\"0.3048\"/>\n<via x=\"20.32\" y=\"43.18\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"20.32\" y1=\"43.18\" x2=\"22.9\" y2=\"43.18\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.9\" y1=\"43.18\" x2=\"22.92\" y2=\"43.16\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.625\" y1=\"24.765\" x2=\"26.035\" y2=\"24.765\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"26.035\" y1=\"24.765\" x2=\"20.32\" y2=\"30.48\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"20.32\" y1=\"30.48\" x2=\"20.32\" y2=\"43.18\" width=\"0.3048\" layer=\"1\"/>\n</signal>\n<signal name=\"RXD\">\n<contactref element=\"U4\" pad=\"20\"/>\n<contactref element=\"U2\" pad=\"34\"/>\n<wire x1=\"45.4025\" y1=\"20.8153\" x2=\"45.4025\" y2=\"22.5425\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.4025\" y1=\"22.5425\" x2=\"44.1325\" y2=\"23.8125\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"44.1325\" y=\"23.8125\" extent=\"1-16\" drill=\"0.3048\"/>\n<via x=\"19.3675\" y=\"41.91\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"19.3675\" y1=\"41.91\" x2=\"22.9\" y2=\"41.91\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.9\" y1=\"41.91\" x2=\"22.92\" y2=\"41.89\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.1325\" y1=\"23.8125\" x2=\"25.7175\" y2=\"23.8125\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"25.7175\" y1=\"23.8125\" x2=\"19.3675\" y2=\"30.1625\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"19.3675\" y1=\"30.1625\" x2=\"19.3675\" y2=\"41.91\" width=\"0.3048\" layer=\"1\"/>\n</signal>\n<signal name=\"IO0\">\n<contactref element=\"Q2\" pad=\"6\"/>\n<contactref element=\"U2\" pad=\"25\"/>\n<via x=\"39.37\" y=\"38.4175\" extent=\"1-16\" drill=\"0.3048\"/>\n<via x=\"51.7525\" y=\"38.4175\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"51.7525\" y1=\"38.4175\" x2=\"50.7825\" y2=\"38.4175\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"50.7825\" y1=\"38.4175\" x2=\"50.7675\" y2=\"38.4025\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"35.56\" y1=\"30.48\" x2=\"22.92\" y2=\"30.48\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.92\" y1=\"30.48\" x2=\"22.92\" y2=\"30.46\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.7525\" y1=\"38.4175\" x2=\"39.37\" y2=\"38.4175\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"39.37\" y1=\"38.4175\" x2=\"39.37\" y2=\"34.29\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.37\" y1=\"34.29\" x2=\"35.56\" y2=\"30.48\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"DTR\">\n<contactref element=\"R17\" pad=\"1\"/>\n<contactref element=\"Q2\" pad=\"1\"/>\n<contactref element=\"U4\" pad=\"1\"/>\n<wire x1=\"45.4025\" y1=\"26.1747\" x2=\"45.4025\" y2=\"29.5275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.4025\" y1=\"29.5275\" x2=\"46.0375\" y2=\"30.1625\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.0375\" y1=\"30.1625\" x2=\"47.9425\" y2=\"30.1625\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.9425\" y1=\"30.1625\" x2=\"49.53\" y2=\"31.75\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.53\" y1=\"31.75\" x2=\"49.53\" y2=\"36.41\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.53\" y1=\"36.41\" x2=\"49.6325\" y2=\"36.5125\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.9275\" y1=\"38.4025\" x2=\"48.9275\" y2=\"37.2175\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.9275\" y1=\"37.2175\" x2=\"49.6325\" y2=\"36.5125\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"RTS\">\n<contactref element=\"R18\" pad=\"1\"/>\n<contactref element=\"Q2\" pad=\"4\"/>\n<contactref element=\"U4\" pad=\"2\"/>\n<wire x1=\"46.0375\" y1=\"26.1747\" x2=\"46.0375\" y2=\"28.8925\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"50.7675\" y1=\"39.7025\" x2=\"51.435\" y2=\"39.7025\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.435\" y1=\"39.7025\" x2=\"51.7375\" y2=\"39.7025\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.7375\" y1=\"39.7025\" x2=\"52.705\" y2=\"38.735\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.3325\" y1=\"41.275\" x2=\"51.3325\" y2=\"39.805\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.3325\" y1=\"39.805\" x2=\"51.435\" y2=\"39.7025\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.0375\" y1=\"28.8925\" x2=\"46.355\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.355\" y1=\"29.21\" x2=\"48.26\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.26\" y1=\"29.21\" x2=\"52.705\" y2=\"33.655\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"52.705\" y1=\"33.655\" x2=\"52.705\" y2=\"38.735\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$10\">\n<contactref element=\"R17\" pad=\"2\"/>\n<contactref element=\"Q2\" pad=\"5\"/>\n<wire x1=\"50.7675\" y1=\"39.0525\" x2=\"50.4825\" y2=\"39.0525\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"50.4825\" y1=\"39.0525\" x2=\"49.8475\" y2=\"38.4175\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.8475\" y1=\"38.4175\" x2=\"49.8475\" y2=\"37.7825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.8475\" y1=\"37.7825\" x2=\"50.165\" y2=\"37.465\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"50.165\" y1=\"37.465\" x2=\"51.1175\" y2=\"37.465\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.1175\" y1=\"37.465\" x2=\"51.435\" y2=\"37.1475\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.435\" y1=\"37.1475\" x2=\"51.435\" y2=\"36.615\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.435\" y1=\"36.615\" x2=\"51.3325\" y2=\"36.5125\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$12\">\n<contactref element=\"R18\" pad=\"2\"/>\n<contactref element=\"Q2\" pad=\"2\"/>\n<wire x1=\"48.9275\" y1=\"39.0525\" x2=\"49.53\" y2=\"39.0525\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.53\" y1=\"39.0525\" x2=\"49.8475\" y2=\"39.37\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.8475\" y1=\"39.37\" x2=\"49.8475\" y2=\"41.06\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.8475\" y1=\"41.06\" x2=\"49.6325\" y2=\"41.275\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"V_USB\">\n<contactref element=\"U1\" pad=\"4\"/>\n<contactref element=\"C19\" pad=\"1\"/>\n<contactref element=\"U4\" pad=\"15\"/>\n<contactref element=\"C14\" pad=\"1\"/>\n<contactref element=\"F1\" pad=\"2\"/>\n<contactref element=\"C15\" pad=\"1\"/>\n<contactref element=\"D3\" pad=\"A\"/>\n<contactref element=\"R7\" pad=\"2\"/>\n<contactref element=\"Q1\" pad=\"1\"/>\n<wire x1=\"51.22\" y1=\"19.05\" x2=\"49.11\" y2=\"19.05\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"52.285\" y1=\"50.4825\" x2=\"54.0076\" y2=\"50.4825\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.0076\" y1=\"50.4825\" x2=\"54.295\" y2=\"50.1951\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"28.705\" x2=\"56.645\" y2=\"28.705\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.645\" y1=\"28.705\" x2=\"58.55\" y2=\"28.705\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"58.55\" y1=\"28.705\" x2=\"62.11\" y2=\"32.265\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"62.11\" y1=\"33.02\" x2=\"62.11\" y2=\"32.265\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.645\" y1=\"28.705\" x2=\"56.515\" y2=\"28.8925\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.5775\" y1=\"20.8153\" x2=\"48.5775\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.5775\" y1=\"21.9075\" x2=\"48.26\" y2=\"22.225\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"48.26\" y=\"22.225\" extent=\"1-16\" drill=\"0.5\"/>\n<via x=\"50.165\" y=\"23.495\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"56.515\" y1=\"28.8925\" x2=\"52.705\" y2=\"28.8925\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"52.705\" y1=\"28.8925\" x2=\"52.07\" y2=\"28.2575\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"52.07\" y1=\"28.2575\" x2=\"52.07\" y2=\"25.4\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"52.07\" y1=\"25.4\" x2=\"50.165\" y2=\"23.495\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.5775\" y1=\"20.8153\" x2=\"48.5775\" y2=\"19.5825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.5775\" y1=\"19.5825\" x2=\"49.11\" y2=\"19.05\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"61.91\" y1=\"34.56\" x2=\"62.23\" y2=\"34.88\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"62.23\" y1=\"34.88\" x2=\"62.23\" y2=\"37.68\" width=\"0.508\" layer=\"16\"/>\n<via x=\"60.96\" y=\"39.6875\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"59.69\" y1=\"40.9575\" x2=\"59.69\" y2=\"46.99\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"59.69\" y1=\"46.99\" x2=\"57.785\" y2=\"48.895\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"57.785\" y1=\"48.895\" x2=\"52.705\" y2=\"48.895\" width=\"0.508\" layer=\"1\"/>\n<via x=\"52.705\" y=\"48.895\" extent=\"1-16\" drill=\"0.5\"/>\n<wire x1=\"52.705\" y1=\"48.895\" x2=\"52.285\" y2=\"49.315\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"52.285\" y1=\"49.315\" x2=\"52.285\" y2=\"50.4825\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"62.11\" y1=\"33.02\" x2=\"62.11\" y2=\"34.36\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"62.11\" y1=\"34.36\" x2=\"61.91\" y2=\"34.56\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"62.23\" y1=\"37.68\" x2=\"61.81\" y2=\"38.1\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"61.81\" y1=\"38.1\" x2=\"61.81\" y2=\"38.8375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"61.81\" y1=\"38.8375\" x2=\"60.96\" y2=\"39.6875\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"59.69\" y1=\"40.9575\" x2=\"60.96\" y2=\"39.6875\" width=\"0.508\" layer=\"1\"/>\n<wire x1=\"48.26\" y1=\"22.225\" x2=\"48.895\" y2=\"22.225\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"48.895\" y1=\"22.225\" x2=\"50.165\" y2=\"23.495\" width=\"0.3048\" layer=\"1\"/>\n</signal>\n<signal name=\"V_BATT\">\n<contactref element=\"JP2\" pad=\"2\"/>\n<contactref element=\"C6\" pad=\"1\"/>\n<contactref element=\"U1\" pad=\"3\"/>\n<contactref element=\"S2\" pad=\"2\"/>\n<wire x1=\"59.885\" y1=\"44.14\" x2=\"54.92\" y2=\"44.14\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.76\" y1=\"45.72\" x2=\"53.76\" y2=\"45.3\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.76\" y1=\"45.3\" x2=\"54.92\" y2=\"44.14\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.295\" y1=\"47.5949\" x2=\"47.6551\" y2=\"47.5949\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"47.6551\" y1=\"47.5949\" x2=\"45.085\" y2=\"50.165\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"45.085\" y1=\"50.165\" x2=\"45.085\" y2=\"51.74\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"45.085\" y1=\"51.74\" x2=\"45.015\" y2=\"51.81\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.295\" y1=\"47.5949\" x2=\"54.295\" y2=\"46.9925\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.295\" y1=\"46.9925\" x2=\"53.76\" y2=\"46.4575\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"53.76\" y1=\"45.72\" x2=\"53.76\" y2=\"46.4575\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"N$16\">\n<contactref element=\"R6\" pad=\"2\"/>\n<contactref element=\"U1\" pad=\"5\"/>\n<wire x1=\"52.285\" y1=\"52.07\" x2=\"55.245\" y2=\"52.07\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.245\" y1=\"52.07\" x2=\"56.195\" y2=\"51.12\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.195\" y1=\"50.1951\" x2=\"56.195\" y2=\"51.12\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"D-\">\n<contactref element=\"R13\" pad=\"1\"/>\n<contactref element=\"C12\" pad=\"1\"/>\n<contactref element=\"JP15\" pad=\"D-\"/>\n<wire x1=\"56.095\" y1=\"24.4475\" x2=\"56.095\" y2=\"23.1775\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"59.38\" y1=\"24.04\" x2=\"57.875\" y2=\"24.04\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.875\" y1=\"24.04\" x2=\"57.4675\" y2=\"24.4475\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"57.4675\" y1=\"24.4475\" x2=\"56.095\" y2=\"24.4475\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"D+\">\n<contactref element=\"R14\" pad=\"1\"/>\n<contactref element=\"C13\" pad=\"1\"/>\n<contactref element=\"JP15\" pad=\"D+\"/>\n<wire x1=\"56.095\" y1=\"20.6375\" x2=\"56.095\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"59.38\" y1=\"23.39\" x2=\"58.315\" y2=\"23.39\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.315\" y1=\"23.39\" x2=\"56.8325\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"56.8325\" y1=\"21.9075\" x2=\"56.095\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"VUSB-RAW\">\n<contactref element=\"C11\" pad=\"1\"/>\n<contactref element=\"F1\" pad=\"1\"/>\n<contactref element=\"JP15\" pad=\"VBUS\"/>\n<wire x1=\"59.38\" y1=\"24.69\" x2=\"58.495\" y2=\"24.69\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"58.495\" y1=\"24.69\" x2=\"58.42\" y2=\"24.765\" width=\"0.4064\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"25.905\" x2=\"57.28\" y2=\"25.905\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"57.28\" y1=\"25.905\" x2=\"58.42\" y2=\"24.765\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.515\" y1=\"25.905\" x2=\"54.525\" y2=\"25.905\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.525\" y1=\"25.905\" x2=\"54.2925\" y2=\"26.1375\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"N$7\">\n<contactref element=\"U4\" pad=\"12\"/>\n<contactref element=\"R13\" pad=\"2\"/>\n<wire x1=\"50.4825\" y1=\"20.8153\" x2=\"50.4825\" y2=\"22.225\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"54.395\" y1=\"23.1775\" x2=\"51.435\" y2=\"23.1775\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.435\" y1=\"23.1775\" x2=\"50.4825\" y2=\"22.225\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$8\">\n<contactref element=\"U4\" pad=\"11\"/>\n<contactref element=\"R14\" pad=\"2\"/>\n<wire x1=\"51.1175\" y1=\"20.8153\" x2=\"51.1175\" y2=\"21.59\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.1175\" y1=\"21.59\" x2=\"51.435\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"51.435\" y1=\"21.9075\" x2=\"54.395\" y2=\"21.9075\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"3.3V_F\">\n<contactref element=\"C16\" pad=\"1\"/>\n<contactref element=\"U4\" pad=\"14\"/>\n<contactref element=\"U4\" pad=\"13\"/>\n<contactref element=\"U4\" pad=\"3\"/>\n<wire x1=\"46.6725\" y1=\"26.1747\" x2=\"46.6725\" y2=\"24.4475\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.8475\" y1=\"20.8153\" x2=\"49.2125\" y2=\"20.8153\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.6725\" y1=\"26.1747\" x2=\"46.6725\" y2=\"27.52\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.6725\" y1=\"27.52\" x2=\"47.0925\" y2=\"27.94\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.2125\" y1=\"20.8153\" x2=\"49.2125\" y2=\"22.86\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"49.2125\" y1=\"22.86\" x2=\"48.5775\" y2=\"23.495\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.5775\" y1=\"23.495\" x2=\"47.625\" y2=\"23.495\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.625\" y1=\"23.495\" x2=\"46.6725\" y2=\"24.4475\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$4\">\n<contactref element=\"R10\" pad=\"2\"/>\n<contactref element=\"Q1\" pad=\"3\"/>\n<contactref element=\"S2\" pad=\"1\"/>\n<wire x1=\"58.42\" y1=\"36.83\" x2=\"58.42\" y2=\"41.175\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"58.42\" y1=\"41.175\" x2=\"59.885\" y2=\"42.64\" width=\"0.508\" layer=\"16\"/>\n<via x=\"48.26\" y=\"36.5125\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"60.96\" y1=\"36.66\" x2=\"58.59\" y2=\"36.66\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"58.59\" y1=\"36.66\" x2=\"58.42\" y2=\"36.83\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.42\" y1=\"36.83\" x2=\"58.42\" y2=\"36.5125\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"58.42\" y=\"36.5125\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"44.7675\" y1=\"36.5125\" x2=\"48.26\" y2=\"36.5125\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.4975\" y1=\"38.52\" x2=\"43.4975\" y2=\"37.7825\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.4975\" y1=\"37.7825\" x2=\"44.7675\" y2=\"36.5125\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"58.42\" y1=\"36.5125\" x2=\"48.26\" y2=\"36.5125\" width=\"0.3048\" layer=\"1\"/>\n</signal>\n<signal name=\"SHARP_SCK\">\n<contactref element=\"K1\" pad=\"1\"/>\n<contactref element=\"U2\" pad=\"13\"/>\n<wire x1=\"34.25\" y1=\"17.6\" x2=\"34.25\" y2=\"19.3275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"34.25\" y1=\"19.3275\" x2=\"39.0525\" y2=\"24.13\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.0525\" y1=\"24.13\" x2=\"39.0525\" y2=\"31.115\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.0525\" y1=\"31.115\" x2=\"39.6875\" y2=\"31.75\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.6875\" y1=\"31.75\" x2=\"40.9\" y2=\"31.75\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.9\" y1=\"31.75\" x2=\"40.92\" y2=\"31.73\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"SHARP_CS\">\n<contactref element=\"K1\" pad=\"3\"/>\n<contactref element=\"U2\" pad=\"23\"/>\n<wire x1=\"33.25\" y1=\"17.6\" x2=\"33.25\" y2=\"20.09\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"33.25\" y1=\"20.09\" x2=\"27.475\" y2=\"25.865\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"27.475\" y1=\"28.97\" x2=\"27.475\" y2=\"25.865\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"SHARP_EXTMODE\">\n<contactref element=\"K1\" pad=\"8\"/>\n<wire x1=\"30.75\" y1=\"17.6\" x2=\"30.75\" y2=\"19.7325\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"30.75\" y1=\"19.7325\" x2=\"21.2725\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"U2\" pad=\"26\"/>\n<wire x1=\"22.92\" y1=\"31.73\" x2=\"21.8875\" y2=\"31.73\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"21.8875\" y1=\"31.73\" x2=\"21.2725\" y2=\"31.115\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"21.2725\" y1=\"31.115\" x2=\"21.2725\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"CRG_STAT\">\n<contactref element=\"U1\" pad=\"1\"/>\n<wire x1=\"56.195\" y1=\"47.5949\" x2=\"56.8024\" y2=\"47.5949\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"56.8024\" y1=\"47.5949\" x2=\"57.4675\" y2=\"46.99\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"57.4675\" y=\"46.99\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"57.4675\" y1=\"46.99\" x2=\"46.99\" y2=\"46.99\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"46.99\" y1=\"46.99\" x2=\"42.545\" y2=\"42.545\" width=\"0.3048\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"4\"/>\n<via x=\"42.545\" y=\"42.545\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"42.545\" y1=\"42.545\" x2=\"41.8525\" y2=\"43.18\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"41.8525\" y1=\"43.18\" x2=\"40.92\" y2=\"43.16\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"SHARP_MOSI\">\n<contactref element=\"K1\" pad=\"2\"/>\n<contactref element=\"U2\" pad=\"16\"/>\n<wire x1=\"36.365\" y1=\"28.97\" x2=\"36.365\" y2=\"22.7125\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"36.365\" y1=\"22.7125\" x2=\"33.75\" y2=\"20.0975\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"33.75\" y1=\"17.6\" x2=\"33.75\" y2=\"20.0975\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"SHARP_VCOM\">\n<contactref element=\"U2\" pad=\"24\"/>\n<contactref element=\"K1\" pad=\"4\"/>\n<wire x1=\"26.205\" y1=\"28.97\" x2=\"26.205\" y2=\"25.865\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"26.205\" y1=\"25.865\" x2=\"32.75\" y2=\"19.32\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"32.75\" y1=\"17.6\" x2=\"32.75\" y2=\"19.32\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"VSS\">\n</signal>\n<signal name=\"VDD\">\n</signal>\n<signal name=\"5V\">\n<contactref element=\"K1\" pad=\"6\"/>\n<contactref element=\"K1\" pad=\"7\"/>\n<contactref element=\"K1\" pad=\"5\"/>\n<wire x1=\"31.25\" y1=\"17.6\" x2=\"31.75\" y2=\"17.6\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"32.25\" y1=\"17.6\" x2=\"31.75\" y2=\"17.6\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"31.75\" y1=\"17.6\" x2=\"31.75\" y2=\"15.24\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"31.75\" y1=\"15.24\" x2=\"33.655\" y2=\"13.335\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"C4\" pad=\"1\"/>\n<contactref element=\"U$1\" pad=\"5\"/>\n<contactref element=\"C8\" pad=\"2\"/>\n<wire x1=\"42.0125\" y1=\"18.415\" x2=\"41.695\" y2=\"18.3125\" width=\"0.3048\" layer=\"16\"/>\n<contactref element=\"R5\" pad=\"1\"/>\n<wire x1=\"42.0125\" y1=\"18.415\" x2=\"40.1075\" y2=\"18.415\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"40.1075\" y1=\"18.415\" x2=\"40.005\" y2=\"18.3125\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"33.655\" y1=\"13.335\" x2=\"37.7825\" y2=\"13.335\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"37.7825\" y1=\"13.335\" x2=\"38.735\" y2=\"14.2875\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"38.735\" y1=\"14.2875\" x2=\"38.735\" y2=\"17.78\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"38.735\" y1=\"17.78\" x2=\"39.37\" y2=\"18.415\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.37\" y1=\"18.415\" x2=\"39.9025\" y2=\"18.415\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.9025\" y1=\"18.415\" x2=\"40.005\" y2=\"18.3125\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.79\" y1=\"20.0025\" x2=\"39.79\" y2=\"18.5275\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"39.79\" y1=\"18.5275\" x2=\"40.005\" y2=\"18.3125\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"42.545\" y1=\"16.5354\" x2=\"42.545\" y2=\"17.4625\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"42.545\" y1=\"17.4625\" x2=\"42.0125\" y2=\"17.995\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"42.0125\" y1=\"18.415\" x2=\"42.0125\" y2=\"17.995\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_A\">\n<contactref element=\"SW1\" pad=\"B'\"/>\n<contactref element=\"SW1\" pad=\"B\"/>\n<contactref element=\"R2\" pad=\"2\"/>\n<wire x1=\"41.765\" y1=\"7.5\" x2=\"47.965\" y2=\"7.5\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"52.07\" y1=\"11.1125\" x2=\"47.9425\" y2=\"6.985\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"47.9425\" y1=\"6.985\" x2=\"47.9425\" y2=\"7.5225\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"47.9425\" y1=\"7.5225\" x2=\"47.965\" y2=\"7.5\" width=\"0.3048\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"9\"/>\n<wire x1=\"40.92\" y1=\"36.81\" x2=\"41.93\" y2=\"36.81\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"45.4025\" y=\"32.0675\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"52.07\" y1=\"25.4\" x2=\"52.07\" y2=\"11.1125\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"52.07\" y1=\"25.4\" x2=\"45.4025\" y2=\"32.0675\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"41.93\" y1=\"36.81\" x2=\"43.815\" y2=\"34.925\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.815\" y1=\"34.925\" x2=\"43.815\" y2=\"33.235\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.4025\" y1=\"32.0675\" x2=\"45.4025\" y2=\"32.385\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.4025\" y1=\"32.385\" x2=\"44.7675\" y2=\"33.02\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.7675\" y1=\"33.02\" x2=\"44.03\" y2=\"33.02\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.03\" y1=\"33.02\" x2=\"43.815\" y2=\"33.235\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_B\">\n<contactref element=\"SW2\" pad=\"B\"/>\n<contactref element=\"SW2\" pad=\"B'\"/>\n<contactref element=\"R4\" pad=\"2\"/>\n<wire x1=\"59.6\" y1=\"7.5\" x2=\"53.4\" y2=\"7.5\" width=\"0.3048\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"8\"/>\n<wire x1=\"40.92\" y1=\"38.08\" x2=\"41.93\" y2=\"38.08\" width=\"0.3048\" layer=\"16\"/>\n<via x=\"47.9425\" y=\"32.0675\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"53.4\" y1=\"7.5\" x2=\"53.4\" y2=\"26.61\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"53.4\" y1=\"26.61\" x2=\"47.9425\" y2=\"32.0675\" width=\"0.3048\" layer=\"1\"/>\n<wire x1=\"41.93\" y1=\"38.08\" x2=\"44.7675\" y2=\"35.2425\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"44.7675\" y1=\"35.2425\" x2=\"46.4575\" y2=\"35.2425\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.4575\" y1=\"35.2425\" x2=\"46.4575\" y2=\"33.5525\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"46.4575\" y1=\"33.5525\" x2=\"47.9425\" y2=\"32.0675\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_CENT\">\n<contactref element=\"S1\" pad=\"CTR\"/>\n<wire x1=\"10.64886875\" y1=\"7.851128125\" x2=\"8.89\" y2=\"9.609996875\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"8.89\" y1=\"9.609996875\" x2=\"8.89\" y2=\"12.7\" width=\"0.254\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"33\"/>\n<via x=\"8.89\" y=\"12.7\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"8.89\" y1=\"12.7\" x2=\"8.89\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.92\" y1=\"40.62\" x2=\"20.3\" y2=\"40.62\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"20.3\" y1=\"40.62\" x2=\"8.89\" y2=\"29.21\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_RIGHT\">\n<contactref element=\"S1\" pad=\"B\"/>\n<wire x1=\"13.335\" y1=\"9.525\" x2=\"10.16\" y2=\"12.7\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"13.335\" y1=\"9.525\" x2=\"13.335\" y2=\"6.0325\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"13.335\" y1=\"6.0325\" x2=\"14.2875\" y2=\"5.08\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"16.341078125\" y1=\"4.13881875\" x2=\"15.399896875\" y2=\"5.08\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"15.399896875\" y1=\"5.08\" x2=\"14.2875\" y2=\"5.08\" width=\"0.254\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"30\"/>\n<via x=\"10.16\" y=\"12.7\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"10.16\" y1=\"12.7\" x2=\"10.16\" y2=\"26.035\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"10.16\" y1=\"26.035\" x2=\"20.955\" y2=\"36.83\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"20.955\" y1=\"36.83\" x2=\"22.92\" y2=\"36.83\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.92\" y1=\"36.83\" x2=\"22.92\" y2=\"36.81\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_LEFT\">\n<contactref element=\"S1\" pad=\"C\"/>\n<wire x1=\"9.65891875\" y1=\"6.861178125\" x2=\"8.255\" y2=\"8.265096875\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"8.255\" y1=\"8.265096875\" x2=\"8.255\" y2=\"13.6525\" width=\"0.254\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"36\"/>\n<via x=\"8.255\" y=\"13.6525\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"8.255\" y1=\"13.6525\" x2=\"8.255\" y2=\"33.3375\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"8.255\" y1=\"33.3375\" x2=\"19.3675\" y2=\"44.45\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"19.3675\" y1=\"44.45\" x2=\"22.9\" y2=\"44.45\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.9\" y1=\"44.45\" x2=\"22.92\" y2=\"44.43\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_DOWN\">\n<contactref element=\"S1\" pad=\"D\"/>\n<wire x1=\"9.2075\" y1=\"5.3975\" x2=\"7.62\" y2=\"6.985\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"7.62\" y1=\"6.985\" x2=\"7.62\" y2=\"12.7\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"14.361178125\" y1=\"2.15891875\" x2=\"13.335\" y2=\"3.185096875\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"13.335\" y1=\"3.185096875\" x2=\"13.335\" y2=\"4.445\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"13.335\" y1=\"4.445\" x2=\"12.3825\" y2=\"5.3975\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"12.3825\" y1=\"5.3975\" x2=\"9.2075\" y2=\"5.3975\" width=\"0.254\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"37\"/>\n<via x=\"7.62\" y=\"12.7\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"7.62\" y1=\"12.7\" x2=\"7.62\" y2=\"33.655\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"7.62\" y1=\"33.655\" x2=\"19.685\" y2=\"45.72\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"19.685\" y1=\"45.72\" x2=\"22.9\" y2=\"45.72\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.9\" y1=\"45.72\" x2=\"22.92\" y2=\"45.7\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"PBT_UP\">\n<contactref element=\"S1\" pad=\"A\"/>\n<wire x1=\"11.63881875\" y1=\"8.841078125\" x2=\"9.525\" y2=\"10.954896875\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"9.525\" y1=\"10.954896875\" x2=\"9.525\" y2=\"13.6525\" width=\"0.254\" layer=\"1\"/>\n<contactref element=\"U2\" pad=\"31\"/>\n<via x=\"9.525\" y=\"13.6525\" extent=\"1-16\" drill=\"0.3048\"/>\n<wire x1=\"9.525\" y1=\"13.6525\" x2=\"9.525\" y2=\"26.3525\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"22.92\" y1=\"38.08\" x2=\"21.2525\" y2=\"38.08\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"21.2525\" y1=\"38.08\" x2=\"9.525\" y2=\"26.3525\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$5\">\n<contactref element=\"D3\" pad=\"C\"/>\n<contactref element=\"Q1\" pad=\"2\"/>\n<contactref element=\"R1\" pad=\"2\"/>\n<wire x1=\"59.81\" y1=\"33.02\" x2=\"59.81\" y2=\"34.36\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"59.81\" y1=\"34.36\" x2=\"60.01\" y2=\"34.56\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"59.81\" y1=\"33.02\" x2=\"58\" y2=\"33.02\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"N$1\">\n<contactref element=\"U$1\" pad=\"6\"/>\n<contactref element=\"R3\" pad=\"1\"/>\n<contactref element=\"U$1\" pad=\"3\"/>\n<contactref element=\"L1\" pad=\"1\"/>\n<contactref element=\"C1\" pad=\"1\"/>\n<wire x1=\"48.895\" y1=\"16.0225\" x2=\"48.332059375\" y2=\"16.163234375\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"48.332059375\" y1=\"16.163234375\" x2=\"47.625\" y2=\"16.34\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"47.625\" y1=\"16.34\" x2=\"47.795\" y2=\"16.34\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"45.085\" y1=\"19.3675\" x2=\"45.085\" y2=\"16.725\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"41.6052\" y1=\"13.9446\" x2=\"41.6052\" y2=\"14.9352\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"41.6052\" y1=\"14.9352\" x2=\"41.91\" y2=\"15.24\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"41.91\" y1=\"15.24\" x2=\"43.18\" y2=\"15.24\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.18\" y1=\"15.24\" x2=\"43.4975\" y2=\"15.5575\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.4975\" y1=\"15.5575\" x2=\"43.4975\" y2=\"16.5227\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.4975\" y1=\"16.5227\" x2=\"43.4848\" y2=\"16.5354\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.64\" y1=\"24.55\" x2=\"40.64\" y2=\"23.8125\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"40.64\" y1=\"23.8125\" x2=\"45.085\" y2=\"19.3675\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"45.085\" y1=\"16.725\" x2=\"43.6744\" y2=\"16.725\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"43.6744\" y1=\"16.725\" x2=\"43.4848\" y2=\"16.5354\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"48.332059375\" y1=\"16.163234375\" x2=\"46.701765625\" y2=\"16.163234375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"46.701765625\" y1=\"16.163234375\" x2=\"46.14\" y2=\"16.725\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"45.085\" y1=\"16.725\" x2=\"46.14\" y2=\"16.725\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"N$2\">\n<contactref element=\"U$1\" pad=\"1\"/>\n<contactref element=\"L1\" pad=\"2\"/>\n<wire x1=\"43.6802\" y1=\"13.8225\" x2=\"43.4848\" y2=\"13.9446\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"43.6802\" y1=\"13.8225\" x2=\"48.895\" y2=\"13.8225\" width=\"0.508\" layer=\"16\"/>\n</signal>\n<signal name=\"B_VFB\">\n<contactref element=\"U$1\" pad=\"4\"/>\n<contactref element=\"R9\" pad=\"1\"/>\n<contactref element=\"R5\" pad=\"2\"/>\n<wire x1=\"40.005\" y1=\"16.6125\" x2=\"40.005\" y2=\"15.1375\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"41.6052\" y1=\"16.5354\" x2=\"40.0821\" y2=\"16.5354\" width=\"0.3048\" layer=\"16\"/>\n<wire x1=\"40.0821\" y1=\"16.5354\" x2=\"40.005\" y2=\"16.6125\" width=\"0.3048\" layer=\"16\"/>\n</signal>\n<signal name=\"N$3\">\n<contactref element=\"C7\" pad=\"1\"/>\n<contactref element=\"R1\" pad=\"1\"/>\n<contactref element=\"U3\" pad=\"1\"/>\n<contactref element=\"U3\" pad=\"3\"/>\n<wire x1=\"56.3\" y1=\"33.02\" x2=\"56.3\" y2=\"33.7575\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.78\" y1=\"34.925\" x2=\"56.78\" y2=\"34.2375\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.78\" y1=\"34.2375\" x2=\"56.3\" y2=\"33.7575\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.83\" y1=\"37.4349\" x2=\"56.83\" y2=\"35.2925\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.83\" y1=\"35.2925\" x2=\"56.78\" y2=\"34.925\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.83\" y1=\"37.4349\" x2=\"56.83\" y2=\"38.42\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"56.83\" y1=\"38.42\" x2=\"56.515\" y2=\"38.735\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.93\" y1=\"37.4349\" x2=\"54.93\" y2=\"38.42\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"54.93\" y1=\"38.42\" x2=\"55.245\" y2=\"38.735\" width=\"0.508\" layer=\"16\"/>\n<wire x1=\"55.245\" y1=\"38.735\" x2=\"56.515\" y2=\"38.735\" width=\"0.508\" layer=\"16\"/>\n</signal>\n</signals>\n<errors>\n<approved hash=\"7,40,6e006e786e546e2c\"/>\n<approved hash=\"7,40,9567280129c9af57\"/>\n<approved hash=\"7,40,5566e81149d98f56\"/>\n<approved hash=\"19,16,21dae820e67e2f84\"/>\n<approved hash=\"19,16,3cd996239865329f\"/>\n<approved hash=\"7,40,3140003801d230aa\"/>\n<approved hash=\"7,40,23028efc0ca09fa6\"/>\n<approved hash=\"7,40,b5669139ac77b6d0\"/>\n<approved hash=\"7,40,310000780052312a\"/>\n<approved hash=\"7,40,62023eff2d231a26\"/>\n<approved hash=\"7,40,0566d03a29f49750\"/>\n<approved hash=\"19,16,6d7f8785843e6ec4\"/>\n<approved hash=\"19,16,697abb80b8386ac2\"/>\n<approved hash=\"19,16,6cf8be02bef46c0e\"/>\n<approved hash=\"19,16,bd7e97849423bed9\"/>\n<approved hash=\"19,16,b8fc920692efb815\"/>\n<approved hash=\"7,40,c35006280636c34e\"/>\n<approved hash=\"7,40,4908f688b1ce34b6\"/>\n<approved hash=\"7,40,22f06ee99355e5b4\"/>\n<approved hash=\"7,40,c36c06140676c30e\"/>\n<approved hash=\"7,40,228380a883051fd6\"/>\n<approved hash=\"7,40,311800600075310d\"/>\n<approved hash=\"7,40,315800200035314d\"/>\n<approved hash=\"7,40,b50e9f8522c536b6\"/>\n<approved hash=\"7,40,050ede86a7461736\"/>\n<approved hash=\"7,40,638330aba2869a56\"/>\n<approved hash=\"7,40,0908b408d68e14f6\"/>\n<approved hash=\"7,40,c92d096e896e492d\"/>\n<approved hash=\"7,40,1be3bc48cc2f1e9a\"/>\n<approved hash=\"7,40,60702ee9b31582f4\"/>\n<approved hash=\"7,40,b2e5f225722532e5\"/>\n<approved hash=\"7,40,49bd08fd88fdc9bd\"/>\n<approved hash=\"7,40,1db0d2f052f09db0\"/>\n<approved hash=\"5,16,f4e760b2a09a0456\"/>\n<approved hash=\"7,40,311c00640046313e\"/>\n<approved hash=\"7,40,2280a1a522099fd4\"/>\n<approved hash=\"7,40,b508fe82c334b646\"/>\n<approved hash=\"7,40,315c002400c631be\"/>\n<approved hash=\"7,40,638011a6038a1a54\"/>\n<approved hash=\"7,40,0508bf8146b797c6\"/>\n<approved hash=\"7,40,ee7cfe04fe97eeef\"/>\n<approved hash=\"7,40,204280beb395ab42\"/>\n<approved hash=\"7,40,20c6839030b22bfa\"/>\n<approved hash=\"7,40,e068fb13bbd518b0\"/>\n<approved hash=\"7,40,e0e8f80038f69835\"/>\n<approved hash=\"7,40,ee7c3e043e96eeee\"/>\n<approved hash=\"5,16,c11ac8950fa5192d\"/>\n<approved hash=\"5,16,a460a3b4a19c37d0\"/>\n<approved hash=\"5,16,cd7cf468a290e7ba\"/>\n<approved hash=\"3,16,5b681d289d25db65\"/>\n<approved hash=\"3,16,16b683e903e396bc\"/>\n<approved hash=\"3,16,917501b581bd117d\"/>\n<approved hash=\"3,16,d0b5c6f446fd50bc\"/>\n<approved hash=\"3,16,d375c7b547bf537f\"/>\n<approved hash=\"3,16,d231c472447f523c\"/>\n<approved hash=\"3,16,6e71c531453cee7c\"/>\n<approved hash=\"3,16,d1b1c9f049fc51bd\"/>\n<approved hash=\"3,16,5171c8b148bdd17d\"/>\n<approved hash=\"3,16,91b608f188fd11ba\"/>\n<approved hash=\"3,16,9f754b35cb331f73\"/>\n<approved hash=\"3,16,107f17bf97ba907a\"/>\n<approved hash=\"3,16,41b48a750a72c1b3\"/>\n<approved hash=\"3,16,51b955f8d5fad1bb\"/>\n<approved hash=\"3,16,02f48b340b3082f0\"/>\n<approved hash=\"3,16,d1789338133b517b\"/>\n<approved hash=\"3,16,c436cc754c714432\"/>\n<approved hash=\"3,16,11bb92f812fb91b8\"/>\n<approved hash=\"3,16,1b760cb68cb29b72\"/>\n<approved hash=\"3,16,1a3752f6d2f29a33\"/>\n<approved hash=\"3,16,597792371234d974\"/>\n<approved hash=\"3,16,583812f792f4d83b\"/>\n<approved hash=\"3,16,99475107d13b197b\"/>\n<approved hash=\"3,16,d6869047107a56bb\"/>\n<approved hash=\"3,16,16c6d18651bb96fb\"/>\n<approved hash=\"3,16,570511c691fbd738\"/>\n<approved hash=\"3,16,9445918511b81478\"/>\n<approved hash=\"3,16,d785edc46dfb57ba\"/>\n<approved hash=\"3,16,17c4d28452ba97fa\"/>\n<approved hash=\"3,16,cc7fd8bf58b54c75\"/>\n<approved hash=\"3,16,5603d344537ad63d\"/>\n<approved hash=\"3,16,4c38587fd875cc32\"/>\n<approved hash=\"3,16,d7fc90bc10bd57fd\"/>\n<approved hash=\"3,16,cdf8d83858324df2\"/>\n<approved hash=\"3,16,173d907c107d973c\"/>\n<approved hash=\"3,16,4db959f8d9f2cdb3\"/>\n<approved hash=\"3,16,cd79d9b959b34d73\"/>\n<approved hash=\"3,16,4d3a5979d973cd30\"/>\n<approved hash=\"3,16,cafad93a59304af0\"/>\n<approved hash=\"3,16,4abb5efadef0cab1\"/>\n<approved hash=\"3,16,ca7bdebb5eb14a71\"/>\n<approved hash=\"3,16,4a445e7bde71ca4e\"/>\n<approved hash=\"3,16,ca04de445e4e4a0e\"/>\n<approved hash=\"3,16,4dc90688868bcdca\"/>\n<approved hash=\"3,16,cd898749074a4d8a\"/>\n<approved hash=\"3,16,4d45c486448acd49\"/>\n<approved hash=\"3,16,cd05c54545494d09\"/>\n<approved hash=\"3,16,4ec405858589cec8\"/>\n<approved hash=\"3,16,ce8559c5d9c84e88\"/>\n<approved hash=\"3,16,4e425885d888ce4f\"/>\n<approved hash=\"3,16,8e8298c218cf0e8f\"/>\n<approved hash=\"3,16,0f40db015b0f8f4e\"/>\n<approved hash=\"3,16,40801a409a4fc08f\"/>\n<approved hash=\"3,16,41435b80db8fc14c\"/>\n<approved hash=\"3,16,81825c42dc4c018c\"/>\n<approved hash=\"3,16,cdc39c821c8f4dce\"/>\n<approved hash=\"3,16,0d03d2c352ce8d0e\"/>\n<approved hash=\"3,16,0ccbd184518e8cc1\"/>\n<approved hash=\"3,16,19b5a4f524f799b7\"/>\n<approved hash=\"3,16,4b0b11cb91c0cb00\"/>\n<approved hash=\"3,16,987424b5a4b71876\"/>\n<approved hash=\"3,16,8a4a500bd0000a41\"/>\n<approved hash=\"3,16,1834a57425769836\"/>\n<approved hash=\"3,16,cb8a914a11414b81\"/>\n<approved hash=\"3,16,98f72534a53618f5\"/>\n<approved hash=\"3,16,c848de8b5e8e484d\"/>\n<approved hash=\"3,16,18b7a5f725f598b5\"/>\n<approved hash=\"3,16,08885e48de4d888d\"/>\n<approved hash=\"3,16,9b766537e5351b74\"/>\n<approved hash=\"3,16,4ac99e881e8dcacc\"/>\n<approved hash=\"3,16,1b36e6f666f49b34\"/>\n<approved hash=\"3,16,8a091d499d4c0a0c\"/>\n<approved hash=\"3,16,db7166b6e6b45b73\"/>\n<approved hash=\"3,16,4a4e9d091d0cca4b\"/>\n<approved hash=\"3,16,5b31e6716673db33\"/>\n<approved hash=\"3,16,888e1dce9dc40884\"/>\n<approved hash=\"3,16,daf06631e6335af2\"/>\n<approved hash=\"3,16,c8cfdd0e5d0448c5\"/>\n<approved hash=\"3,16,5ab02670a672dab2\"/>\n<approved hash=\"3,16,0e0f5ccfdcc48e04\"/>\n<approved hash=\"3,16,19f3a630260d99ce\"/>\n<approved hash=\"3,16,4d4d130e9307cd44\"/>\n<approved hash=\"3,16,99b326f3a6ce198e\"/>\n<approved hash=\"3,16,838dd34d53450385\"/>\n<approved hash=\"3,16,5ef2a6b3268edecf\"/>\n<approved hash=\"3,16,c5ca968b168545c4\"/>\n<approved hash=\"3,16,deb261f2e1cf5e8f\"/>\n<approved hash=\"3,16,c689134993434683\"/>\n<approved hash=\"3,16,5e6de1b2618fde50\"/>\n<approved hash=\"3,16,87d70c088c0307dc\"/>\n<approved hash=\"3,16,1fad616de1509f90\"/>\n<approved hash=\"3,16,47174d57cd5cc71c\"/>\n<approved hash=\"3,16,deef22aea2905ed1\"/>\n<approved hash=\"3,16,c6d98f980f9c46dd\"/>\n<approved hash=\"3,16,dfafa36f23515f91\"/>\n<approved hash=\"3,16,4698c9d849ddc69d\"/>\n<approved hash=\"3,16,dc6c63afe3ae5c6d\"/>\n<approved hash=\"3,16,c6580b1b8b1d465e\"/>\n<approved hash=\"3,16,dd2ce36c636d5d2d\"/>\n<approved hash=\"3,16,c7184a58ca5e471e\"/>\n<approved hash=\"3,16,7b83f8c378c3fb83\"/>\n<approved hash=\"3,16,1e6da2ac22ad9e6c\"/>\n<approved hash=\"3,16,79423903b900f941\"/>\n<approved hash=\"3,16,39837a43fa41b981\"/>\n<approved hash=\"3,16,3644bd833d80b647\"/>\n<approved hash=\"3,16,f784fdc47dc77787\"/>\n<approved hash=\"3,16,76457d84fd87f646\"/>\n<approved hash=\"3,16,b785bdc53dc63786\"/>\n<approved hash=\"3,16,f7d9fd1a7d0777c4\"/>\n<approved hash=\"3,16,7799fed97ec4f784\"/>\n<approved hash=\"3,16,87d83f19bf0407c5\"/>\n<approved hash=\"3,16,c7194059c0454705\"/>\n<approved hash=\"3,16,0656ff997f85864a\"/>\n<approved hash=\"3,16,4696fe567e49c689\"/>\n<approved hash=\"3,16,c757bf963f894748\"/>\n<approved hash=\"3,16,ad1d2a5daa5c2d1c\"/>\n<approved hash=\"3,16,c4177ed7fec84408\"/>\n<approved hash=\"3,16,ec5e6b9deb9c6c5f\"/>\n<approved hash=\"3,16,0554fe977e88854b\"/>\n<approved hash=\"3,16,2e9eabde2bdcae9c\"/>\n<approved hash=\"3,16,459441d4c1cac58a\"/>\n<approved hash=\"3,16,b35f2b9eab9d335c\"/>\n<approved hash=\"3,16,81d5c194418a01cb\"/>\n<approved hash=\"3,16,b6186bd8ebd23612\"/>\n<approved hash=\"3,16,c11482d402cb410b\"/>\n<approved hash=\"3,16,36dfeb986b92b6d5\"/>\n<approved hash=\"3,16,c0d30294829440d3\"/>\n<approved hash=\"3,16,b69f2bdfabd53695\"/>\n<approved hash=\"3,16,0313c3d343d38313\"/>\n<approved hash=\"3,16,375eab9f2b95b754\"/>\n<approved hash=\"3,16,b71e6adeead43714\"/>\n<approved hash=\"3,16,37da6999e994b7d7\"/>\n<approved hash=\"3,16,b79a685ae8573797\"/>\n<approved hash=\"3,16,305aae9b2e97b056\"/>\n<approved hash=\"3,16,b0192b59ab563016\"/>\n<approved hash=\"3,16,30e7b5183516b0e9\"/>\n<approved hash=\"7,40,26ce6d6c98056b82\"/>\n<approved hash=\"7,40,ebb1f449f46aeb92\"/>\n<approved hash=\"7,40,1d5a4fb20b534bbc\"/>\n<approved hash=\"7,40,7f678ce064d22f70\"/>\n<approved hash=\"7,40,26cc6d8858e2ab40\"/>\n<approved hash=\"7,40,ff660cc024366f76\"/>\n<approved hash=\"7,40,03ce0036001503ed\"/>\n<approved hash=\"7,40,8191c0ee40ee0191\"/>\n<approved hash=\"7,40,e34575553050e669\"/>\n<approved hash=\"7,40,203360f3e0f3a033\"/>\n<approved hash=\"7,40,e1dc04240414e1ec\"/>\n<approved hash=\"7,40,23ce572d6d47a182\"/>\n<approved hash=\"7,40,242c4dbe77f4a640\"/>\n<approved hash=\"7,40,e1fe040604f4e10c\"/>\n<approved hash=\"7,40,24fc44447e2ea6bc\"/>\n<approved hash=\"7,40,df7207fdf8cb986e\"/>\n<approved hash=\"7,40,e1fc04040496e16e\"/>\n<approved hash=\"7,40,24c2574bed38265a\"/>\n<approved hash=\"7,40,d86014b4eb829f70\"/>\n<approved hash=\"7,40,24444b7ef11f2638\"/>\n<approved hash=\"7,40,dff608dc77c618f1\"/>\n<approved hash=\"7,40,df6014176bf1186d\"/>\n<approved hash=\"7,40,24664e91f492261a\"/>\n<approved hash=\"7,40,dfe80d31727718d1\"/>\n<approved hash=\"7,40,df660e03f1d59896\"/>\n<approved hash=\"7,40,e1dc04240417e1ef\"/>\n<approved hash=\"7,40,e1fe040604f7e10f\"/>\n<approved hash=\"7,40,e1fc04040495e16d\"/>\n<approved hash=\"19,16,beff17851510bc6a\"/>\n<approved hash=\"19,16,b3cd1ab71b18b262\"/>\n<approved hash=\"19,16,a3fe24045875df8f\"/>\n<approved hash=\"19,16,7bcc08b609007a7a\"/>\n<approved hash=\"19,16,76fe058407087472\"/>\n<approved hash=\"4,16,bb640f4010adac56\"/>\n<approved hash=\"4,16,20fb32969bcebf34\"/>\n<approved hash=\"4,16,467846a631780389\"/>\n<approved hash=\"4,16,66b22591e0a0dee0\"/>\n<approved hash=\"4,16,339f820aad4fad08\"/>\n<approved hash=\"19,16,721eb824bcc076fa\"/>\n<approved hash=\"19,16,71acbb96ba187022\"/>\n<approved hash=\"19,16,3233b809bdd837e2\"/>\n</errors>\n</board>\n</drawing>\n<compatibility>\n<note version=\"6.3\" minversion=\"6.2.2\" severity=\"warning\">\nSince Version 6.2.2 text objects can contain more than one line,\nwhich will not be processed correctly with this version.\n</note>\n</compatibility>\n</eagle>\n"
  },
  {
    "path": "Eagle Files/Memory Display.sch",
    "content": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE eagle SYSTEM \"eagle.dtd\">\n<eagle version=\"7.7.0\">\n<drawing>\n<settings>\n<setting alwaysvectorfont=\"no\"/>\n<setting verticaltext=\"up\"/>\n</settings>\n<grid distance=\"0.1\" unitdist=\"inch\" unit=\"inch\" style=\"lines\" multiple=\"1\" display=\"no\" altdistance=\"0.01\" altunitdist=\"inch\" altunit=\"inch\"/>\n<layers>\n<layer number=\"1\" name=\"Top\" color=\"4\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"16\" name=\"Bottom\" color=\"1\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"17\" name=\"Pads\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"18\" name=\"Vias\" color=\"2\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"19\" name=\"Unrouted\" color=\"6\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"20\" name=\"Dimension\" color=\"15\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"21\" name=\"tPlace\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"22\" name=\"bPlace\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"23\" name=\"tOrigins\" color=\"15\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"24\" name=\"bOrigins\" color=\"15\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"25\" name=\"tNames\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"26\" name=\"bNames\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"27\" name=\"tValues\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"28\" name=\"bValues\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"29\" name=\"tStop\" color=\"7\" fill=\"3\" visible=\"no\" active=\"no\"/>\n<layer number=\"30\" name=\"bStop\" color=\"7\" fill=\"6\" visible=\"no\" active=\"no\"/>\n<layer number=\"31\" name=\"tCream\" color=\"7\" fill=\"4\" visible=\"no\" active=\"no\"/>\n<layer number=\"32\" name=\"bCream\" color=\"7\" fill=\"5\" visible=\"no\" active=\"no\"/>\n<layer number=\"33\" name=\"tFinish\" color=\"6\" fill=\"3\" visible=\"no\" active=\"no\"/>\n<layer number=\"34\" name=\"bFinish\" color=\"6\" fill=\"6\" visible=\"no\" active=\"no\"/>\n<layer number=\"35\" name=\"tGlue\" color=\"7\" fill=\"4\" visible=\"no\" active=\"no\"/>\n<layer number=\"36\" name=\"bGlue\" color=\"7\" fill=\"5\" visible=\"no\" active=\"no\"/>\n<layer number=\"37\" name=\"tTest\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"38\" name=\"bTest\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"39\" name=\"tKeepout\" color=\"4\" fill=\"11\" visible=\"no\" active=\"no\"/>\n<layer number=\"40\" name=\"bKeepout\" color=\"1\" fill=\"11\" visible=\"no\" active=\"no\"/>\n<layer number=\"41\" name=\"tRestrict\" color=\"4\" fill=\"10\" visible=\"no\" active=\"no\"/>\n<layer number=\"42\" name=\"bRestrict\" color=\"1\" fill=\"10\" visible=\"no\" active=\"no\"/>\n<layer number=\"43\" name=\"vRestrict\" color=\"2\" fill=\"10\" visible=\"no\" active=\"no\"/>\n<layer number=\"44\" name=\"Drills\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"45\" name=\"Holes\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"46\" name=\"Milling\" color=\"3\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"47\" name=\"Measures\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"48\" name=\"Document\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"49\" name=\"Reference\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"50\" name=\"dxf\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"51\" name=\"tDocu\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"52\" name=\"bDocu\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"53\" name=\"tGND_GNDA\" color=\"7\" fill=\"9\" visible=\"no\" active=\"no\"/>\n<layer number=\"54\" name=\"bGND_GNDA\" color=\"1\" fill=\"9\" visible=\"no\" active=\"no\"/>\n<layer number=\"56\" name=\"wert\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"57\" name=\"tCAD\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"59\" name=\"tCarbon\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"60\" name=\"bCarbon\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"88\" name=\"SimResults\" color=\"9\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"89\" name=\"SimProbes\" color=\"9\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"90\" name=\"Modules\" color=\"5\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"91\" name=\"Nets\" color=\"2\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"92\" name=\"Busses\" color=\"1\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"93\" name=\"Pins\" color=\"2\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"94\" name=\"Symbols\" color=\"4\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"95\" name=\"Names\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"96\" name=\"Values\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"97\" name=\"Info\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"98\" name=\"Guide\" color=\"6\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"99\" name=\"SpiceOrder\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"100\" name=\"Muster\" color=\"7\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"101\" name=\"Patch_Top\" color=\"12\" fill=\"4\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"102\" name=\"Vscore\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"103\" name=\"tMap\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"104\" name=\"Name\" color=\"16\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"105\" name=\"tPlate\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"106\" name=\"bPlate\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"107\" name=\"Crop\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"108\" name=\"tplace-old\" color=\"10\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"109\" name=\"ref-old\" color=\"11\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"110\" name=\"fp0\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"111\" name=\"LPC17xx\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"112\" name=\"tSilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"113\" name=\"IDFDebug\" color=\"4\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"114\" name=\"Badge_Outline\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"115\" name=\"ReferenceISLANDS\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"116\" name=\"Patch_BOT\" color=\"9\" fill=\"4\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"118\" name=\"Rect_Pads\" color=\"7\" fill=\"1\" visible=\"no\" active=\"yes\"/>\n<layer number=\"121\" name=\"_tsilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"122\" name=\"_bsilk\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"123\" name=\"tTestmark\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"124\" name=\"bTestmark\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"125\" name=\"_tNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"126\" name=\"_bNames\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"127\" name=\"_tValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"128\" name=\"_bValues\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"129\" name=\"Mask\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"131\" name=\"tAdjust\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"132\" name=\"bAdjust\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"144\" name=\"Drill_legend\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"150\" name=\"Notes\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"151\" name=\"HeatSink\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"152\" name=\"_bDocu\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"153\" name=\"FabDoc1\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"154\" name=\"FabDoc2\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"155\" name=\"FabDoc3\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"199\" name=\"Contour\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"200\" name=\"200bmp\" color=\"1\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"201\" name=\"201bmp\" color=\"2\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"202\" name=\"202bmp\" color=\"3\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"203\" name=\"203bmp\" color=\"4\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"204\" name=\"204bmp\" color=\"5\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"205\" name=\"205bmp\" color=\"6\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"206\" name=\"206bmp\" color=\"7\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"207\" name=\"207bmp\" color=\"8\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"208\" name=\"208bmp\" color=\"9\" fill=\"10\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"209\" name=\"209bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"210\" name=\"210bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"211\" name=\"211bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"212\" name=\"212bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"213\" name=\"213bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"214\" name=\"214bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"215\" name=\"215bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"216\" name=\"216bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"217\" name=\"217bmp\" color=\"18\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"218\" name=\"218bmp\" color=\"19\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"219\" name=\"219bmp\" color=\"20\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"220\" name=\"220bmp\" color=\"21\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"221\" name=\"221bmp\" color=\"22\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"222\" name=\"222bmp\" color=\"23\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"223\" name=\"223bmp\" color=\"24\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"224\" name=\"224bmp\" color=\"25\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"225\" name=\"225bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"226\" name=\"226bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"227\" name=\"227bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"228\" name=\"228bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"229\" name=\"229bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"230\" name=\"230bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"231\" name=\"231bmp\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"232\" name=\"Eagle3D_PG2\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"233\" name=\"Eagle3D_PG3\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"248\" name=\"Housing\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"249\" name=\"Edge\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"250\" name=\"Descript\" color=\"3\" fill=\"1\" visible=\"no\" active=\"no\"/>\n<layer number=\"251\" name=\"SMDround\" color=\"12\" fill=\"11\" visible=\"no\" active=\"no\"/>\n<layer number=\"254\" name=\"cooling\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n<layer number=\"255\" name=\"routoute\" color=\"7\" fill=\"1\" visible=\"yes\" active=\"yes\"/>\n</layers>\n<schematic xreflabel=\"%F%N/%S.%C%R\" xrefpart=\"/%S.%C%R\">\n<libraries>\n<library name=\"SparkFun-Electromechanical\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"JOYSTICK_MINI\">\n<smd name=\"A\" x=\"-3.325\" y=\"1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"B\" x=\"3.325\" y=\"1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"C\" x=\"-3.325\" y=\"-1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"CTR\" x=\"-3.325\" y=\"0\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"D\" x=\"3.325\" y=\"-1.4\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"GND\" x=\"3.325\" y=\"0\" dx=\"1.85\" dy=\"1.1\" layer=\"1\"/>\n<smd name=\"NC\" x=\"0\" y=\"4.13\" dx=\"1.9\" dy=\"2\" layer=\"1\"/>\n<smd name=\"NC@0\" x=\"0\" y=\"-4.13\" dx=\"1.9\" dy=\"2\" layer=\"1\"/>\n<text x=\"-2.5\" y=\"3.8\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-2.5\" y=\"-4.2\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<hole x=\"0\" y=\"1.9\" drill=\"0.75\"/>\n<hole x=\"0\" y=\"-1.9\" drill=\"1.05\"/>\n<wire x1=\"2.65\" y1=\"-3.5\" x2=\"-2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.65\" y1=\"-3.5\" x2=\"-3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.65\" y1=\"-2.5\" x2=\"-3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.65\" y1=\"2.5\" x2=\"-2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.65\" y1=\"3.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"3.5\" x2=\"2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.65\" y1=\"3.5\" x2=\"3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.65\" y1=\"2.5\" x2=\"3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.65\" y1=\"-2.5\" x2=\"2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.046446875\" y1=\"-0.353553125\" x2=\"-0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.353553125\" y1=\"-1.046446875\" x2=\"0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"0.353553125\" y1=\"-1.046446875\" x2=\"1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.046446875\" y1=\"-0.353553125\" x2=\"1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"1.046446875\" y1=\"0.353553125\" x2=\"0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.353553125\" y1=\"1.046446875\" x2=\"-0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<wire x1=\"-0.353553125\" y1=\"1.046446875\" x2=\"-1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.046446875\" y1=\"0.353553125\" x2=\"-1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"21\" curve=\"90\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.3\" y1=\"1.3\" x2=\"-2.2\" y2=\"2.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-1.6\" y2=\"2.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-2.2\" y2=\"1.6\" width=\"0.2032\" layer=\"21\"/>\n<text x=\"-2.9\" y=\"1.9\" size=\"0.8128\" layer=\"21\" ratio=\"20\" rot=\"SR45\">UP</text>\n<wire x1=\"-1\" y1=\"3.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.65\" y1=\"-3.5\" x2=\"-2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.65\" y1=\"-3.5\" x2=\"-3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.65\" y1=\"-2.5\" x2=\"-3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.65\" y1=\"2.5\" x2=\"-2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.65\" y1=\"3.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"1\" y1=\"3.5\" x2=\"2.65\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2.65\" y1=\"3.5\" x2=\"3.65\" y2=\"2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3.65\" y1=\"2.5\" x2=\"3.65\" y2=\"-2.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3.65\" y1=\"-2.5\" x2=\"2.65\" y2=\"-3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.046446875\" y1=\"-0.353553125\" x2=\"-0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-0.353553125\" y1=\"-1.046446875\" x2=\"0.353553125\" y2=\"-1.046446875\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"0.353553125\" y1=\"-1.046446875\" x2=\"1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"1.046446875\" y1=\"-0.353553125\" x2=\"1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.046446875\" y1=\"0.353553125\" x2=\"0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0.353553125\" y1=\"1.046446875\" x2=\"-0.353553125\" y2=\"1.046446875\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-0.353553125\" y1=\"1.046446875\" x2=\"-1.046446875\" y2=\"0.353553125\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.046446875\" y1=\"0.353553125\" x2=\"-1.046446875\" y2=\"-0.353553125\" width=\"0.2032\" layer=\"51\" curve=\"90\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"2.5\" x2=\"-1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.3\" y1=\"1.3\" x2=\"-2.2\" y2=\"2.2\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-1.6\" y2=\"2.2\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.2\" y1=\"2.2\" x2=\"-2.2\" y2=\"1.6\" width=\"0.2032\" layer=\"51\"/>\n<text x=\"-2.9\" y=\"1.9\" size=\"0.8128\" layer=\"51\" ratio=\"20\" rot=\"SR45\">UP</text>\n<wire x1=\"-1\" y1=\"3.5\" x2=\"1\" y2=\"3.5\" width=\"0.2032\" layer=\"51\"/>\n</package>\n<package name=\"SWITCH-SPDT\">\n<wire x1=\"2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"2.54\" drill=\"1.016\" diameter=\"1.8796\"/>\n<pad name=\"2\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\"/>\n<pad name=\"3\" x=\"0\" y=\"-2.54\" drill=\"1.016\" diameter=\"1.8796\"/>\n<text x=\"-3.81\" y=\"7.62\" size=\"1.778\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-3.81\" y=\"-9.525\" size=\"1.778\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n<package name=\"AYZ0202\">\n<description>&lt;b&gt;DPDT Slide Switch SMD&lt;/b&gt;\nwww.SparkFun.com SKU : Comp-SMDS</description>\n<wire x1=\"-3.6\" y1=\"1.75\" x2=\"-3.6\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.6\" y1=\"-1.75\" x2=\"3.6\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.6\" y1=\"-1.75\" x2=\"3.6\" y2=\"1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.6\" y1=\"1.75\" x2=\"-3.6\" y2=\"1.75\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"3\" x=\"2.5\" y=\"2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<smd name=\"2\" x=\"0\" y=\"2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<smd name=\"1\" x=\"-2.5\" y=\"2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<smd name=\"6\" x=\"2.5\" y=\"-2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<smd name=\"5\" x=\"0\" y=\"-2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<smd name=\"4\" x=\"-2.5\" y=\"-2.825\" dx=\"1\" dy=\"1.15\" layer=\"1\"/>\n<text x=\"-2.54\" y=\"1.143\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"0.508\" y=\"1.143\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<hole x=\"1.5\" y=\"0\" drill=\"0.85\"/>\n<hole x=\"-1.5\" y=\"0\" drill=\"0.85\"/>\n</package>\n<package name=\"SWITCHE-DPDT\">\n<wire x1=\"8\" y1=\"3.25\" x2=\"-8\" y2=\"3.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-8\" y1=\"3.25\" x2=\"-8\" y2=\"-3.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-8\" y1=\"-3.25\" x2=\"8\" y2=\"-3.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"8\" y1=\"-3.25\" x2=\"8\" y2=\"3.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-6\" y1=\"3.25\" x2=\"6\" y2=\"3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8\" y1=\"1\" x2=\"8\" y2=\"-1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"6\" y1=\"-3.25\" x2=\"-6\" y2=\"-3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-8\" y1=\"-1\" x2=\"-8\" y2=\"1\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-7.5\" y=\"3\" drill=\"1.5\" diameter=\"2.54\"/>\n<pad name=\"P$2\" x=\"-7.5\" y=\"-3\" drill=\"1.5\" diameter=\"2.54\"/>\n<pad name=\"P$3\" x=\"7.5\" y=\"3\" drill=\"1.5\" diameter=\"2.54\"/>\n<pad name=\"P$4\" x=\"7.5\" y=\"-3\" drill=\"1.5\" diameter=\"2.54\"/>\n<pad name=\"1\" x=\"-4\" y=\"1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n<pad name=\"2\" x=\"0\" y=\"1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n<pad name=\"3\" x=\"4\" y=\"1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n<pad name=\"4\" x=\"-4\" y=\"-1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n<pad name=\"5\" x=\"0\" y=\"-1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n<pad name=\"6\" x=\"4\" y=\"-1.25\" drill=\"0.7\" diameter=\"1.6764\"/>\n</package>\n<package name=\"R_SW_TH\">\n<wire x1=\"-1.651\" y1=\"19.2532\" x2=\"-1.651\" y2=\"-1.3716\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.651\" y1=\"-1.3716\" x2=\"-1.651\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.651\" y1=\"19.2532\" x2=\"13.589\" y2=\"19.2532\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"13.589\" y1=\"19.2532\" x2=\"13.589\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"13.589\" y1=\"-2.2352\" x2=\"-1.651\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"0\" y=\"0\" drill=\"1.6002\"/>\n<pad name=\"P$2\" x=\"0\" y=\"16.9926\" drill=\"1.6002\"/>\n<pad name=\"P$3\" x=\"12.0904\" y=\"15.494\" drill=\"1.6002\"/>\n<pad name=\"P$4\" x=\"12.0904\" y=\"8.4582\" drill=\"1.6002\"/>\n</package>\n<package name=\"SWITCH-SPDT-SMD\">\n<wire x1=\"-4.5\" y1=\"1.75\" x2=\"-4.5\" y2=\"-1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-4.5\" y1=\"-1.75\" x2=\"4.5\" y2=\"-1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"4.5\" y1=\"-1.75\" x2=\"4.5\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"4.5\" y1=\"1.75\" x2=\"2\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"1.75\" x2=\"0.5\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.5\" y1=\"1.75\" x2=\"-4.5\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.5\" y1=\"1.75\" x2=\"0.5\" y2=\"3.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.5\" y1=\"3.75\" x2=\"2\" y2=\"3.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"3.75\" x2=\"2\" y2=\"1.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-4\" y1=\"-1.75\" x2=\"-4.5\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.5\" y1=\"-1.75\" x2=\"-4.5\" y2=\"1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.5\" y1=\"1.75\" x2=\"4.5\" y2=\"1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4.5\" y1=\"1.75\" x2=\"4.5\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4.5\" y1=\"-1.75\" x2=\"4\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-2.5\" y=\"-2.75\" dx=\"1.2\" dy=\"2.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"0\" y=\"-2.75\" dx=\"1.2\" dy=\"2.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"2.5\" y=\"-2.75\" dx=\"1.2\" dy=\"2.5\" layer=\"1\" rot=\"R180\"/>\n<text x=\"-1.27\" y=\"0.635\" size=\"0.6096\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"-1.27\" size=\"0.6096\" layer=\"27\">&gt;Value</text>\n<hole x=\"-3.55\" y=\"0\" drill=\"0.9\"/>\n<hole x=\"3.55\" y=\"0\" drill=\"0.9\"/>\n</package>\n<package name=\"SWITCH-SPDT_LOCK.007S\">\n<wire x1=\"2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"2.7178\" drill=\"1.016\" diameter=\"1.8796\"/>\n<pad name=\"2\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\"/>\n<pad name=\"3\" x=\"0\" y=\"-2.7178\" drill=\"1.016\" diameter=\"1.8796\"/>\n<text x=\"-3.81\" y=\"7.62\" size=\"1.778\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-3.81\" y=\"-9.525\" size=\"1.778\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n<rectangle x1=\"-0.2286\" y1=\"-0.3048\" x2=\"0.2286\" y2=\"0.3048\" layer=\"51\"/>\n<rectangle x1=\"-0.2286\" y1=\"2.2352\" x2=\"0.2286\" y2=\"2.8448\" layer=\"51\"/>\n<rectangle x1=\"-0.2286\" y1=\"-2.8448\" x2=\"0.2286\" y2=\"-2.2352\" layer=\"51\"/>\n</package>\n<package name=\"SWITCH-SPDT_KIT\">\n<description>&lt;h3&gt;SWITCH-SPDT_KIT&lt;/h3&gt;\nThrough-hole SPDT Switch&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>\n<wire x1=\"2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"5.815\" x2=\"-2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"-5.815\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.175\" y1=\"-5.815\" x2=\"2.175\" y2=\"5.815\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"2.7178\" drill=\"1.016\" diameter=\"1.8796\" stop=\"no\"/>\n<pad name=\"2\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" stop=\"no\"/>\n<pad name=\"3\" x=\"0\" y=\"-2.7178\" drill=\"1.016\" diameter=\"1.8796\" stop=\"no\"/>\n<text x=\"-3.81\" y=\"7.62\" size=\"1.778\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-3.81\" y=\"-9.525\" size=\"1.778\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n<rectangle x1=\"-0.2286\" y1=\"-0.3048\" x2=\"0.2286\" y2=\"0.3048\" layer=\"51\"/>\n<rectangle x1=\"-0.2286\" y1=\"2.2352\" x2=\"0.2286\" y2=\"2.8448\" layer=\"51\"/>\n<rectangle x1=\"-0.2286\" y1=\"-2.8448\" x2=\"0.2286\" y2=\"-2.2352\" layer=\"51\"/>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-0.0178\" y=\"1.8414\" curve=\"-90.039946\"/>\n<vertex x=\"-0.8787\" y=\"2.6975\" curve=\"-90\"/>\n<vertex x=\"-0.0026\" y=\"3.5916\" curve=\"-90.006409\"/>\n<vertex x=\"0.8738\" y=\"2.6975\" curve=\"-90.03214\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-0.0051\" y=\"-3.5967\" curve=\"-90.006558\"/>\n<vertex x=\"-0.8788\" y=\"-2.7431\" curve=\"-90.037923\"/>\n<vertex x=\"0.0128\" y=\"-1.8363\" curve=\"-90.006318\"/>\n<vertex x=\"0.8814\" y=\"-2.7432\" curve=\"-90.038792\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-0.0102\" y=\"-0.8738\" curve=\"-90.019852\"/>\n<vertex x=\"-0.8762\" y=\"-0.0203\" curve=\"-90.019119\"/>\n<vertex x=\"0.0153\" y=\"0.8789\" curve=\"-90\"/>\n<vertex x=\"0.8739\" y=\"-0.0077\" curve=\"-90.038897\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"0\" y=\"2.2758\" curve=\"-90.012891\"/>\n<vertex x=\"-0.4445\" y=\"2.7\" curve=\"-90\"/>\n<vertex x=\"0\" y=\"3.1673\" curve=\"-90\"/>\n<vertex x=\"0.4419\" y=\"2.7102\" curve=\"-90.012967\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"0.0026\" y=\"-3.1648\" curve=\"-90.012891\"/>\n<vertex x=\"-0.4419\" y=\"-2.7406\" curve=\"-90\"/>\n<vertex x=\"0.0026\" y=\"-2.2733\" curve=\"-90\"/>\n<vertex x=\"0.4445\" y=\"-2.7304\" curve=\"-90.012967\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"0.0102\" y=\"-0.4471\" curve=\"-90.012891\"/>\n<vertex x=\"-0.4343\" y=\"-0.0229\" curve=\"-90\"/>\n<vertex x=\"0.0102\" y=\"0.4444\" curve=\"-90\"/>\n<vertex x=\"0.4521\" y=\"-0.0127\" curve=\"-90.012967\"/>\n</polygon>\n</package>\n<package name=\"SWITCH-SPST-SMD-A\">\n<wire x1=\"-3.35\" y1=\"1.3\" x2=\"-3.35\" y2=\"-1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.35\" y1=\"-1.3\" x2=\"3.35\" y2=\"-1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.35\" y1=\"-1.3\" x2=\"3.35\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.35\" y1=\"1.3\" x2=\"-0.1\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"1.3\" x2=\"-1.4\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"1.3\" x2=\"-3.35\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"1.3\" x2=\"-0.1\" y2=\"2.8\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.1\" y1=\"2.8\" x2=\"-1.4\" y2=\"2.8\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"2.8\" x2=\"-1.4\" y2=\"1.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.35\" y1=\"0.3\" x2=\"-3.35\" y2=\"-0.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.35\" y1=\"0.3\" x2=\"3.35\" y2=\"-0.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.7\" y1=\"1.3\" x2=\"-2.7\" y2=\"1.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.5\" y1=\"-1.3\" x2=\"0\" y2=\"-1.3\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-2.25\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"-0.75\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"2.25\" y=\"-1.75\" dx=\"0.7\" dy=\"1.5\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"GND1\" x=\"-3.65\" y=\"1\" dx=\"1\" dy=\"0.6\" layer=\"1\"/>\n<smd name=\"GND2\" x=\"-3.65\" y=\"-1.1\" dx=\"1\" dy=\"0.8\" layer=\"1\"/>\n<smd name=\"GND3\" x=\"3.65\" y=\"1\" dx=\"1\" dy=\"0.6\" layer=\"1\"/>\n<smd name=\"GND4\" x=\"3.65\" y=\"-1.1\" dx=\"1\" dy=\"0.8\" layer=\"1\"/>\n<text x=\"-1.27\" y=\"0.635\" size=\"0.6096\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"-1.27\" size=\"0.6096\" layer=\"27\">&gt;Value</text>\n<hole x=\"-1.5\" y=\"0\" drill=\"0.9\"/>\n<hole x=\"1.5\" y=\"0\" drill=\"0.9\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"JOYSTICK_MINI\">\n<wire x1=\"-10.16\" y1=\"5.08\" x2=\"10.16\" y2=\"5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"10.16\" y1=\"5.08\" x2=\"10.16\" y2=\"-5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"10.16\" y1=\"-5.08\" x2=\"-10.16\" y2=\"-5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-10.16\" y1=\"-5.08\" x2=\"-10.16\" y2=\"5.08\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-10.16\" y=\"-7.62\" size=\"1.778\" layer=\"96\" font=\"vector\">&gt;Value</text>\n<text x=\"-10.16\" y=\"5.842\" size=\"1.778\" layer=\"95\" font=\"vector\">&gt;Name</text>\n<pin name=\"CENT\" x=\"12.7\" y=\"-2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"DOWN\" x=\"-12.7\" y=\"0\" length=\"short\"/>\n<pin name=\"GND\" x=\"-12.7\" y=\"-2.54\" length=\"short\"/>\n<pin name=\"LEFT\" x=\"12.7\" y=\"2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"RIGHT\" x=\"12.7\" y=\"0\" length=\"short\" rot=\"R180\"/>\n<pin name=\"UP\" x=\"-12.7\" y=\"2.54\" length=\"short\"/>\n</symbol>\n<symbol name=\"TOGGLE\">\n<wire x1=\"0\" y1=\"0\" x2=\"2.54\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-2.54\" x2=\"3.175\" y2=\"-2.54\" width=\"0.127\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"2.54\" x2=\"3.175\" y2=\"2.54\" width=\"0.1524\" layer=\"94\"/>\n<circle x=\"2.54\" y=\"2.54\" radius=\"0.3592\" width=\"0.2032\" layer=\"94\"/>\n<circle x=\"2.54\" y=\"-2.54\" radius=\"0.3592\" width=\"0.2032\" layer=\"94\"/>\n<circle x=\"0\" y=\"0\" radius=\"0.3592\" width=\"0.2032\" layer=\"94\"/>\n<text x=\"-1.905\" y=\"-6.35\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"-2.54\" y=\"3.81\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"P\" x=\"-2.54\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\"/>\n<pin name=\"S\" x=\"5.08\" y=\"-2.54\" visible=\"off\" length=\"short\" direction=\"pas\" rot=\"R180\"/>\n<pin name=\"O\" x=\"5.08\" y=\"2.54\" visible=\"off\" length=\"short\" direction=\"pas\" rot=\"R180\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"JOYSTICK_MINI\" prefix=\"S\" uservalue=\"yes\">\n<description>Small 5-way tactile joystick, COM-10063&lt;p&gt;\n4UCON SF303GJ26</description>\n<gates>\n<gate name=\"G$1\" symbol=\"JOYSTICK_MINI\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"JOYSTICK_MINI\">\n<connects>\n<connect gate=\"G$1\" pin=\"CENT\" pad=\"CTR\"/>\n<connect gate=\"G$1\" pin=\"DOWN\" pad=\"D\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"GND\"/>\n<connect gate=\"G$1\" pin=\"LEFT\" pad=\"C\"/>\n<connect gate=\"G$1\" pin=\"RIGHT\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"UP\" pad=\"A\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"SWITCH-SPDT\" prefix=\"S\" uservalue=\"yes\">\n<description>&lt;b&gt;SPDT Switch&lt;/b&gt;&lt;br&gt;\nSimple slide switch, Spark Fun Electronics SKU : COM-00102&lt;br&gt;\nDPDT SMT slide switch, AYZ0202, SWCH-08179</description>\n<gates>\n<gate name=\"1\" symbol=\"TOGGLE\" x=\"-2.54\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"PTH\" package=\"SWITCH-SPDT\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"SWCH-08261\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"SMD\" package=\"AYZ0202\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"SWCH-08179\" constant=\"no\"/>\n<attribute name=\"SF_ID\" value=\"COM-00597\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"PTH2\" package=\"SWITCHE-DPDT\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"PTH3\" package=\"R_SW_TH\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"P$1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"P$2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"P$3\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"SMD2\" package=\"SWITCH-SPDT-SMD\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"PTH_LOCK\" package=\"SWITCH-SPDT_LOCK.007S\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"KIT\" package=\"SWITCH-SPDT_KIT\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"SWCH-08261\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-SMD-A\" package=\"SWITCH-SPST-SMD-A\">\n<connects>\n<connect gate=\"1\" pin=\"O\" pad=\"1\"/>\n<connect gate=\"1\" pin=\"P\" pad=\"2\"/>\n<connect gate=\"1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"SWCH-10651\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"microbuilder\">\n<packages>\n<package name=\"EVQ-Q2\">\n<wire x1=\"-3.3\" y1=\"3\" x2=\"3.3\" y2=\"3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"3\" x2=\"3.3\" y2=\"-3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"-3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.3\" y1=\"-1.2\" x2=\"-3.3\" y2=\"1.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"1.2\" x2=\"3.3\" y2=\"-1.2\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5033\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"B\" x=\"-3.4\" y=\"2\" dx=\"3.2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"B'\" x=\"3.4\" y=\"2\" dx=\"3.2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A'\" x=\"3.4\" y=\"-2\" dx=\"3.2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A\" x=\"-3.4\" y=\"-2\" dx=\"3.2\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-3.175\" y=\"3.5\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-3.175\" y=\"-3.683\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n<package name=\"BTN_KMR2_4.6X2.8\">\n<wire x1=\"-0.4\" y1=\"0.4\" x2=\"0\" y2=\"0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"0.4\" x2=\"0.4\" y2=\"0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.4\" y1=\"-0.4\" x2=\"0\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"-0.4\" x2=\"0.4\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"0.4\" x2=\"0\" y2=\"0.2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"-0.4\" x2=\"0\" y2=\"-0.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"0.2\" x2=\"0.3\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-2.1\" y1=\"1.4\" x2=\"2.1\" y2=\"1.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2.1\" y1=\"1.4\" x2=\"2.1\" y2=\"-1.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2.1\" y1=\"-1.4\" x2=\"-2.1\" y2=\"-1.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.1\" y1=\"-1.4\" x2=\"-2.1\" y2=\"1.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.05\" y1=\"-0.8\" x2=\"-1.05\" y2=\"0.8\" width=\"0.2032\" layer=\"51\" curve=\"-44.999389\"/>\n<wire x1=\"-1.05\" y1=\"0.8\" x2=\"1.05\" y2=\"0.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"1.05\" y1=\"0.8\" x2=\"1.05\" y2=\"-0.8\" width=\"0.2032\" layer=\"51\" curve=\"-44.999389\"/>\n<wire x1=\"1.05\" y1=\"-0.8\" x2=\"-1.05\" y2=\"-0.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.1\" y1=\"1.5254\" x2=\"2.1\" y2=\"1.5254\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.1\" y1=\"-1.5254\" x2=\"-2.1\" y2=\"-1.5254\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"A\" x=\"2.05\" y=\"0.8\" dx=\"0.9\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"B\" x=\"2.05\" y=\"-0.8\" dx=\"0.9\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"B'\" x=\"-2.05\" y=\"-0.8\" dx=\"0.9\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"A'\" x=\"-2.05\" y=\"0.8\" dx=\"0.9\" dy=\"0.9\" layer=\"1\"/>\n<text x=\"-2.032\" y=\"1.778\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-2.032\" y=\"-2.159\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n<package name=\"BTN_EVQPQ_4.5MM\">\n<wire x1=\"-2.25\" y1=\"2.25\" x2=\"2.25\" y2=\"2.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2.25\" y1=\"2.25\" x2=\"2.25\" y2=\"-2.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"2.25\" y1=\"-2.25\" x2=\"-2.25\" y2=\"-2.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-2.25\" y1=\"-2.25\" x2=\"-2.25\" y2=\"2.25\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-2.25\" y1=\"-1.15\" x2=\"-2.25\" y2=\"1.15\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.25\" y1=\"2.25\" x2=\"1.25\" y2=\"2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.25\" y1=\"1.15\" x2=\"2.25\" y2=\"-1.15\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.25\" y1=\"-2.25\" x2=\"1.25\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<smd name=\"A\" x=\"-1.95\" y=\"1.925\" dx=\"0.9\" dy=\"1\" layer=\"1\"/>\n<smd name=\"B\" x=\"1.95\" y=\"1.925\" dx=\"0.9\" dy=\"1\" layer=\"1\"/>\n<smd name=\"C\" x=\"-1.95\" y=\"-1.925\" dx=\"0.9\" dy=\"1\" layer=\"1\"/>\n<smd name=\"D\" x=\"1.95\" y=\"-1.925\" dx=\"0.9\" dy=\"1\" layer=\"1\"/>\n<text x=\"-2.286\" y=\"2.794\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-2.286\" y=\"-3.556\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n<package name=\"BTN_KMT0\">\n<description>&lt;p&gt;Source: http://media.digikey.com/pdf/Data%20Sheets/C&amp;K/KMT_0xx_NGJ_LHS_Drawing.pdf&lt;/p&gt;</description>\n<smd name=\"A\" x=\"-1.625\" y=\"0.95\" dx=\"0.95\" dy=\"0.7\" layer=\"1\"/>\n<smd name=\"B\" x=\"-1.625\" y=\"-0.95\" dx=\"0.95\" dy=\"0.7\" layer=\"1\"/>\n<smd name=\"B'\" x=\"1.625\" y=\"-0.95\" dx=\"0.95\" dy=\"0.7\" layer=\"1\"/>\n<smd name=\"A'\" x=\"1.625\" y=\"0.95\" dx=\"0.95\" dy=\"0.7\" layer=\"1\"/>\n<wire x1=\"-1.15\" y1=\"1.3\" x2=\"-1.25\" y2=\"1.2\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.25\" y1=\"1.2\" x2=\"-1.25\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.25\" y1=\"0.7\" x2=\"-1.4\" y2=\"0.55\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.4\" y1=\"0.55\" x2=\"-1.425\" y2=\"0.55\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.425\" y1=\"0.55\" x2=\"-1.5\" y2=\"0.475\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.5\" y1=\"0.475\" x2=\"-1.5\" y2=\"0.15\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"0.15\" x2=\"-1.5\" y2=\"-0.25\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.25\" x2=\"-1.5\" y2=\"-0.5\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.5\" x2=\"-1.425\" y2=\"-0.575\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.425\" y1=\"-0.575\" x2=\"-1.4\" y2=\"-0.575\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"-0.575\" x2=\"-1.25\" y2=\"-0.725\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.25\" y1=\"-0.725\" x2=\"-1.25\" y2=\"-1.2\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.25\" y1=\"-1.2\" x2=\"-1.125\" y2=\"-1.325\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.125\" y1=\"-1.325\" x2=\"1.125\" y2=\"-1.325\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.125\" y1=\"-1.325\" x2=\"1.25\" y2=\"-1.2\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.25\" y1=\"-1.2\" x2=\"1.25\" y2=\"-0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.25\" y1=\"-0.7\" x2=\"1.375\" y2=\"-0.575\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.375\" y1=\"-0.575\" x2=\"1.425\" y2=\"-0.575\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.425\" y1=\"-0.575\" x2=\"1.5\" y2=\"-0.5\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.5\" y1=\"-0.5\" x2=\"1.5\" y2=\"-0.275\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"-0.275\" x2=\"1.5\" y2=\"0.125\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.125\" x2=\"1.5\" y2=\"0.475\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.475\" x2=\"1.425\" y2=\"0.55\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.4\" y1=\"0.55\" x2=\"1.35\" y2=\"0.55\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.35\" y1=\"0.55\" x2=\"1.25\" y2=\"0.65\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.25\" y1=\"0.65\" x2=\"1.25\" y2=\"1.2\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.25\" y1=\"1.2\" x2=\"1.15\" y2=\"1.3\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.15\" y1=\"1.3\" x2=\"-1.15\" y2=\"1.3\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.15\" y1=\"1.3\" x2=\"1.25\" y2=\"1.3\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.25\" y1=\"1.3\" x2=\"1.375\" y2=\"1.175\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.375\" y1=\"1.175\" x2=\"1.325\" y2=\"1.175\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"1.175\" x2=\"1.325\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"0.675\" x2=\"1.325\" y2=\"0.625\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"0.625\" x2=\"1.4\" y2=\"0.55\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.4\" y1=\"0.55\" x2=\"1.425\" y2=\"0.55\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.425\" y1=\"0.55\" x2=\"1.5\" y2=\"0.475\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.5\" y1=\"0.125\" x2=\"1.55\" y2=\"0.125\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.55\" y1=\"0.125\" x2=\"1.55\" y2=\"-0.275\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.55\" y1=\"-0.275\" x2=\"1.5\" y2=\"-0.275\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.375\" y1=\"1.175\" x2=\"1.625\" y2=\"1.175\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.625\" y1=\"1.175\" x2=\"1.725\" y2=\"1.175\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.725\" y1=\"1.175\" x2=\"1.725\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.725\" y1=\"0.675\" x2=\"1.625\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.625\" y1=\"0.675\" x2=\"1.5\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.675\" x2=\"1.325\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.475\" x2=\"1.5\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.625\" y1=\"1.175\" x2=\"1.625\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"-0.725\" x2=\"1.325\" y2=\"-0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"-0.675\" x2=\"1.425\" y2=\"-0.575\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.325\" y1=\"-0.725\" x2=\"1.5\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"-0.725\" x2=\"1.6\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.6\" y1=\"-0.725\" x2=\"1.7\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.7\" y1=\"-0.725\" x2=\"1.7\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.7\" y1=\"-1.225\" x2=\"1.6\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.6\" y1=\"-1.225\" x2=\"1.375\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.375\" y1=\"-1.225\" x2=\"1.325\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.325\" y1=\"-1.225\" x2=\"1.325\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.6\" y1=\"-0.725\" x2=\"1.6\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.125\" y1=\"-1.325\" x2=\"1.275\" y2=\"-1.325\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.275\" y1=\"-1.325\" x2=\"1.375\" y2=\"-1.225\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.5\" y1=\"-0.5\" x2=\"1.5\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.05\" y1=\"1.225\" x2=\"1.05\" y2=\"1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.05\" y1=\"1.225\" x2=\"1.175\" y2=\"1.1\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.175\" y1=\"1.1\" x2=\"1.175\" y2=\"0.675\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.175\" y1=\"0.675\" x2=\"1.325\" y2=\"0.525\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.325\" y1=\"0.525\" x2=\"1.35\" y2=\"0.525\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.35\" y1=\"0.525\" x2=\"1.45\" y2=\"0.425\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.45\" y1=\"0.425\" x2=\"1.45\" y2=\"-0.45\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.45\" y1=\"-0.45\" x2=\"1.325\" y2=\"-0.575\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.325\" y1=\"-0.575\" x2=\"1.3\" y2=\"-0.575\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.3\" y1=\"-0.575\" x2=\"1.175\" y2=\"-0.7\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"1.175\" y1=\"-0.7\" x2=\"1.175\" y2=\"-1.125\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"1.175\" y1=\"-1.125\" x2=\"1.05\" y2=\"-1.25\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"1.05\" y1=\"-1.25\" x2=\"-1.025\" y2=\"-1.25\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.025\" y1=\"-1.25\" x2=\"-1.175\" y2=\"-1.1\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.175\" y1=\"-1.1\" x2=\"-1.175\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.175\" y1=\"-0.725\" x2=\"-1.35\" y2=\"-0.55\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.35\" y1=\"-0.55\" x2=\"-1.375\" y2=\"-0.55\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.375\" y1=\"-0.55\" x2=\"-1.45\" y2=\"-0.475\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.45\" y1=\"-0.475\" x2=\"-1.45\" y2=\"0.425\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.45\" y1=\"0.425\" x2=\"-1.35\" y2=\"0.525\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.35\" y1=\"0.525\" x2=\"-1.325\" y2=\"0.525\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.325\" y1=\"0.525\" x2=\"-1.175\" y2=\"0.675\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.175\" y1=\"0.675\" x2=\"-1.175\" y2=\"1.1\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.175\" y1=\"1.1\" x2=\"-1.05\" y2=\"1.225\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.15\" y1=\"1.3\" x2=\"-1.275\" y2=\"1.3\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.275\" y1=\"1.3\" x2=\"-1.375\" y2=\"1.2\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.7\" y1=\"1.2\" x2=\"-1.6\" y2=\"1.2\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.6\" y1=\"1.2\" x2=\"-1.35\" y2=\"1.2\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"1.2\" x2=\"-1.35\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"0.7\" x2=\"-1.5\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"0.7\" x2=\"-1.6\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.6\" y1=\"0.7\" x2=\"-1.7\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.7\" y1=\"0.7\" x2=\"-1.7\" y2=\"1.2\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.6\" y1=\"1.2\" x2=\"-1.6\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"0.7\" x2=\"-1.35\" y2=\"0.625\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"0.625\" x2=\"-1.425\" y2=\"0.55\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.5\" y1=\"0.15\" x2=\"-1.55\" y2=\"0.15\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.55\" y1=\"0.15\" x2=\"-1.55\" y2=\"-0.25\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.55\" y1=\"-0.25\" x2=\"-1.5\" y2=\"-0.25\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"0.475\" x2=\"-1.5\" y2=\"0.7\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.125\" y1=\"-1.325\" x2=\"-1.275\" y2=\"-1.325\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.275\" y1=\"-1.325\" x2=\"-1.375\" y2=\"-1.225\" width=\"0.05\" layer=\"51\" curve=\"-90\"/>\n<wire x1=\"-1.25\" y1=\"-1.225\" x2=\"-1.35\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"-1.225\" x2=\"-1.625\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.625\" y1=\"-1.225\" x2=\"-1.725\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.725\" y1=\"-1.225\" x2=\"-1.725\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.725\" y1=\"-0.725\" x2=\"-1.625\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.625\" y1=\"-0.725\" x2=\"-1.5\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.725\" x2=\"-1.35\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"-0.725\" x2=\"-1.35\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.625\" y1=\"-0.725\" x2=\"-1.625\" y2=\"-1.225\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"-0.725\" x2=\"-1.35\" y2=\"-0.65\" width=\"0.05\" layer=\"51\"/>\n<wire x1=\"-1.35\" y1=\"-0.65\" x2=\"-1.425\" y2=\"-0.575\" width=\"0.05\" layer=\"51\" curve=\"90\"/>\n<wire x1=\"-1.5\" y1=\"-0.5\" x2=\"-1.5\" y2=\"-0.725\" width=\"0.05\" layer=\"51\"/>\n<circle x=\"0\" y=\"0\" radius=\"0.391309375\" width=\"0.05\" layer=\"51\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.053859375\" width=\"0.05\" layer=\"51\"/>\n<text x=\"-1.732\" y=\"1.503\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-1.507\" y=\"-1.884\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n<wire x1=\"-0.975\" y1=\"1.3\" x2=\"0.975\" y2=\"1.3\" width=\"0.05\" layer=\"21\"/>\n<wire x1=\"-1.5\" y1=\"0.475\" x2=\"-1.5\" y2=\"-0.475\" width=\"0.05\" layer=\"21\"/>\n<wire x1=\"1.5\" y1=\"0.475\" x2=\"1.5\" y2=\"-0.475\" width=\"0.05\" layer=\"21\"/>\n<wire x1=\"-0.975\" y1=\"-1.325\" x2=\"0.975\" y2=\"-1.325\" width=\"0.05\" layer=\"21\"/>\n</package>\n<package name=\"EVQ-Q2_SMALLER\">\n<wire x1=\"-3.3\" y1=\"3\" x2=\"3.3\" y2=\"3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"3\" x2=\"3.3\" y2=\"-3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"-3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.3\" y1=\"-3\" x2=\"-3.3\" y2=\"3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.3\" y1=\"-1.2\" x2=\"-3.3\" y2=\"1.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.3\" y1=\"1.2\" x2=\"3.3\" y2=\"-1.2\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1.5033\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"0\" y=\"0\" radius=\"1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"B\" x=\"-3.1\" y=\"2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"B'\" x=\"3.1\" y=\"2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A'\" x=\"3.1\" y=\"-2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"A\" x=\"-3.1\" y=\"-2\" dx=\"2\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-3.175\" y=\"3.5\" size=\"0.8128\" layer=\"25\" ratio=\"18\">&gt;NAME</text>\n<text x=\"-3.175\" y=\"-3.683\" size=\"0.4064\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n</packages>\n<symbols>\n<symbol name=\"BUTTON_4PIN\">\n<wire x1=\"1.905\" y1=\"0\" x2=\"2.54\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.905\" y1=\"4.445\" x2=\"1.905\" y2=\"3.175\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-1.905\" y1=\"4.445\" x2=\"-1.905\" y2=\"3.175\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.905\" y1=\"4.445\" x2=\"0\" y2=\"4.445\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"4.445\" x2=\"-1.905\" y2=\"4.445\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"0\" y2=\"1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"1.27\" x2=\"0\" y2=\"0.635\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"4.445\" x2=\"0\" y2=\"3.175\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-2.54\" x2=\"2.54\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"-2.54\" x2=\"-2.54\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"1.905\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<circle x=\"-2.54\" y=\"0\" radius=\"0.127\" width=\"0.4064\" layer=\"94\"/>\n<circle x=\"2.54\" y=\"0\" radius=\"0.127\" width=\"0.4064\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"6.35\" size=\"1.27\" layer=\"95\">&gt;NAME</text>\n<text x=\"-2.54\" y=\"-5.08\" size=\"1.27\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"P\" x=\"-5.08\" y=\"0\" visible=\"pad\" length=\"short\" direction=\"pas\" swaplevel=\"2\"/>\n<pin name=\"S\" x=\"5.08\" y=\"0\" visible=\"pad\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R180\"/>\n<pin name=\"S1\" x=\"5.08\" y=\"-2.54\" visible=\"pad\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R180\"/>\n<pin name=\"P1\" x=\"-5.08\" y=\"-2.54\" visible=\"pad\" length=\"short\" direction=\"pas\" swaplevel=\"2\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"SWITCH_TACT_SMT\" prefix=\"SW\" uservalue=\"yes\">\n<description>&lt;p&gt;SMT Tact Switches&lt;/p&gt;\n&lt;ul&gt;\n&lt;li&gt;6x6mm - Digikey: P12940SCT-ND&lt;/li&gt;\n&lt;li&gt;KMR2 (4.6x2.8mm) - Digikey: 401-1426-1-ND&lt;/li&gt;\n&lt;li&gt;EVQ-PQHB55 - Light Touch, 160GF (4.5x4.5mm) - Digikey: P8090SCT-ND&lt;/li&gt;\n&lt;li&gt;KMT0 - KMT021 NGJ LHS (etc.) IP68/Waterproof - Digikey: CKN10289CT-ND&lt;/li&gt;\n&lt;/ul&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"BUTTON_4PIN\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"EVQ-Q2\">\n<connects>\n<connect gate=\"G$1\" pin=\"P\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"P1\" pad=\"A'\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"S1\" pad=\"B'\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"4.6X2.8\" package=\"BTN_KMR2_4.6X2.8\">\n<connects>\n<connect gate=\"G$1\" pin=\"P\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"P1\" pad=\"A'\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"S1\" pad=\"B'\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"EVQPQ\" package=\"BTN_EVQPQ_4.5MM\">\n<connects>\n<connect gate=\"G$1\" pin=\"P\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"P1\" pad=\"C\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"S1\" pad=\"D\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"KMT0\" package=\"BTN_KMT0\">\n<connects>\n<connect gate=\"G$1\" pin=\"P\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"P1\" pad=\"A'\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"S1\" pad=\"B'\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"_EVQQ2_SMALL\" package=\"EVQ-Q2_SMALLER\">\n<connects>\n<connect gate=\"G$1\" pin=\"P\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"P1\" pad=\"A'\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"B\"/>\n<connect gate=\"G$1\" pin=\"S1\" pad=\"B'\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-RF\">\n<description>&lt;h3&gt;SparkFun RF, WiFi, Cellular, and Bluetooth&lt;/h3&gt;\nIn this library you'll find things that send or receive RF-- cellular modules, Bluetooth, WiFi, etc.\n&lt;br&gt;\n&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. \n&lt;br&gt;\n&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=\" www.sparkfun.com\"&gt;SparkFun.com&lt;/a&gt;.\n&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;\n&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"ESP-WROOM-32\">\n<wire x1=\"-10.3\" y1=\"-9\" x2=\"-10.3\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"-10.3\" y1=\"9\" x2=\"9.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"9\" x2=\"15.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"15.2\" y1=\"9\" x2=\"15.2\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"15.2\" y1=\"-9\" x2=\"9.2\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"-9\" x2=\"-10.3\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"9.2\" y1=\"-9\" x2=\"9.2\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<text x=\"12.2\" y=\"0\" size=\"1.27\" layer=\"51\" rot=\"R270\" align=\"center\">Keepout Zone</text>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"8.15\" y=\"9\"/>\n<vertex x=\"8\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"7.925\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"7.475\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"7.4\" y=\"9\"/>\n<vertex x=\"7.25\" y=\"9\"/>\n<vertex x=\"7.25\" y=\"8.55\"/>\n<vertex x=\"8.15\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"9\"/>\n<vertex x=\"6.73\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"6.655\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"6.205\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"6.13\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"8.55\"/>\n<vertex x=\"6.88\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"9\"/>\n<vertex x=\"5.46\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"5.385\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"4.935\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"4.86\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"8.55\"/>\n<vertex x=\"5.61\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"9\"/>\n<vertex x=\"4.19\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"4.115\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"3.665\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"3.59\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"8.55\"/>\n<vertex x=\"4.34\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"9\"/>\n<vertex x=\"2.92\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"2.845\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"2.395\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"2.32\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"8.55\"/>\n<vertex x=\"3.07\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"9\"/>\n<vertex x=\"1.65\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"1.575\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"1.125\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"1.05\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"8.55\"/>\n<vertex x=\"1.8\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"9\"/>\n<vertex x=\"0.38\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"0.305\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-0.145\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-0.22\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"8.55\"/>\n<vertex x=\"0.53\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"9\"/>\n<vertex x=\"-0.89\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-0.965\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-1.415\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-1.49\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"8.55\"/>\n<vertex x=\"-0.74\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"9\"/>\n<vertex x=\"-2.16\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-2.235\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-2.685\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-2.76\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"8.55\"/>\n<vertex x=\"-2.01\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"9\"/>\n<vertex x=\"-3.43\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-3.505\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-3.955\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-4.03\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"8.55\"/>\n<vertex x=\"-3.28\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"9\"/>\n<vertex x=\"-4.7\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-4.775\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-5.225\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-5.3\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"8.55\"/>\n<vertex x=\"-4.55\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"9\"/>\n<vertex x=\"-5.97\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-6.045\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-6.495\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-6.57\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"8.55\"/>\n<vertex x=\"-5.82\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"9\"/>\n<vertex x=\"-7.24\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-7.315\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-7.765\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-7.84\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"8.55\"/>\n<vertex x=\"-7.09\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"9\"/>\n<vertex x=\"-8.51\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-8.585\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-9.035\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-9.11\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"8.55\"/>\n<vertex x=\"-8.36\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"8.15\" y=\"-9\"/>\n<vertex x=\"8\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"7.925\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"7.475\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"7.4\" y=\"-9\"/>\n<vertex x=\"7.25\" y=\"-9\"/>\n<vertex x=\"7.25\" y=\"-8.55\"/>\n<vertex x=\"8.15\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"-9\"/>\n<vertex x=\"6.73\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"6.655\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"6.205\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"6.13\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-8.55\"/>\n<vertex x=\"6.88\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"-9\"/>\n<vertex x=\"5.46\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"5.385\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"4.935\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"4.86\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-8.55\"/>\n<vertex x=\"5.61\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"-9\"/>\n<vertex x=\"4.19\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"4.115\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"3.665\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"3.59\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-8.55\"/>\n<vertex x=\"4.34\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"-9\"/>\n<vertex x=\"2.92\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"2.845\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"2.395\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"2.32\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-8.55\"/>\n<vertex x=\"3.07\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"-9\"/>\n<vertex x=\"1.65\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"1.575\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"1.125\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"1.05\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-8.55\"/>\n<vertex x=\"1.8\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"-9\"/>\n<vertex x=\"0.38\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"0.305\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-0.145\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-0.22\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-8.55\"/>\n<vertex x=\"0.53\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"-9\"/>\n<vertex x=\"-0.89\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-0.965\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-1.415\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-1.49\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-8.55\"/>\n<vertex x=\"-0.74\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"-9\"/>\n<vertex x=\"-2.16\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-2.235\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-2.685\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-2.76\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-8.55\"/>\n<vertex x=\"-2.01\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"-9\"/>\n<vertex x=\"-3.43\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-3.505\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-3.955\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-4.03\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-8.55\"/>\n<vertex x=\"-3.28\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"-9\"/>\n<vertex x=\"-4.7\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-4.775\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-5.225\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-5.3\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-8.55\"/>\n<vertex x=\"-4.55\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"-9\"/>\n<vertex x=\"-5.97\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-6.045\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-6.495\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-6.57\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-8.55\"/>\n<vertex x=\"-5.82\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"-9\"/>\n<vertex x=\"-7.24\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-7.315\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-7.765\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-7.84\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-8.55\"/>\n<vertex x=\"-7.09\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"-9\"/>\n<vertex x=\"-8.51\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-8.585\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-9.035\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-9.11\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-8.55\"/>\n<vertex x=\"-8.36\" y=\"-8.55\"/>\n</polygon>\n<smd name=\"1\" x=\"7.7\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"2\" x=\"6.43\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"3\" x=\"5.16\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"4\" x=\"3.89\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"5\" x=\"2.62\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"6\" x=\"1.35\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"7\" x=\"0.08\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"8\" x=\"-1.19\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"9\" x=\"-2.46\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"10\" x=\"-3.73\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"11\" x=\"-5\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"12\" x=\"-6.27\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"13\" x=\"-7.54\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"14\" x=\"-8.81\" y=\"9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"1.085\"/>\n<vertex x=\"-10.3\" y=\"0.935\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"0.86\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"0.41\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"0.335\"/>\n<vertex x=\"-10.3\" y=\"0.185\"/>\n<vertex x=\"-9.85\" y=\"0.185\"/>\n<vertex x=\"-9.85\" y=\"1.085\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-0.185\"/>\n<vertex x=\"-10.3\" y=\"-0.335\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-0.41\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-0.86\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-0.935\"/>\n<vertex x=\"-10.3\" y=\"-1.085\"/>\n<vertex x=\"-9.85\" y=\"-1.085\"/>\n<vertex x=\"-9.85\" y=\"-0.185\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"2.355\"/>\n<vertex x=\"-10.3\" y=\"2.205\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"2.13\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"1.68\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"1.605\"/>\n<vertex x=\"-10.3\" y=\"1.455\"/>\n<vertex x=\"-9.85\" y=\"1.455\"/>\n<vertex x=\"-9.85\" y=\"2.355\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"3.625\"/>\n<vertex x=\"-10.3\" y=\"3.475\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"3.4\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"2.95\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"2.875\"/>\n<vertex x=\"-10.3\" y=\"2.725\"/>\n<vertex x=\"-9.85\" y=\"2.725\"/>\n<vertex x=\"-9.85\" y=\"3.625\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"4.895\"/>\n<vertex x=\"-10.3\" y=\"4.745\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"4.67\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"4.22\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"4.145\"/>\n<vertex x=\"-10.3\" y=\"3.995\"/>\n<vertex x=\"-9.85\" y=\"3.995\"/>\n<vertex x=\"-9.85\" y=\"4.895\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"6.165\"/>\n<vertex x=\"-10.3\" y=\"6.015\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"5.94\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"5.49\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"5.415\"/>\n<vertex x=\"-10.3\" y=\"5.265\"/>\n<vertex x=\"-9.85\" y=\"5.265\"/>\n<vertex x=\"-9.85\" y=\"6.165\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-1.455\"/>\n<vertex x=\"-10.3\" y=\"-1.605\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-1.68\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-2.13\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-2.205\"/>\n<vertex x=\"-10.3\" y=\"-2.355\"/>\n<vertex x=\"-9.85\" y=\"-2.355\"/>\n<vertex x=\"-9.85\" y=\"-1.455\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-2.725\"/>\n<vertex x=\"-10.3\" y=\"-2.875\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-2.95\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-3.4\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-3.475\"/>\n<vertex x=\"-10.3\" y=\"-3.625\"/>\n<vertex x=\"-9.85\" y=\"-3.625\"/>\n<vertex x=\"-9.85\" y=\"-2.725\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-3.995\"/>\n<vertex x=\"-10.3\" y=\"-4.145\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-4.22\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-4.67\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-4.745\"/>\n<vertex x=\"-10.3\" y=\"-4.895\"/>\n<vertex x=\"-9.85\" y=\"-4.895\"/>\n<vertex x=\"-9.85\" y=\"-3.995\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-10.3\" y=\"-5.265\"/>\n<vertex x=\"-10.3\" y=\"-5.415\" curve=\"-45\"/>\n<vertex x=\"-10.075\" y=\"-5.49\" curve=\"-90\"/>\n<vertex x=\"-10.075\" y=\"-5.94\" curve=\"-45\"/>\n<vertex x=\"-10.3\" y=\"-6.015\"/>\n<vertex x=\"-10.3\" y=\"-6.165\"/>\n<vertex x=\"-9.85\" y=\"-6.165\"/>\n<vertex x=\"-9.85\" y=\"-5.265\"/>\n</polygon>\n<smd name=\"15\" x=\"-10.3\" y=\"5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"16\" x=\"-10.3\" y=\"4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"17\" x=\"-10.3\" y=\"3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"18\" x=\"-10.3\" y=\"1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"19\" x=\"-10.3\" y=\"0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"20\" x=\"-10.3\" y=\"-0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"21\" x=\"-10.3\" y=\"-1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"22\" x=\"-10.3\" y=\"-3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"23\" x=\"-10.3\" y=\"-4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"24\" x=\"-10.3\" y=\"-5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"25\" x=\"-8.81\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"26\" x=\"-7.54\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"27\" x=\"-6.27\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"28\" x=\"-5\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"29\" x=\"-3.73\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"30\" x=\"-2.46\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"31\" x=\"-1.19\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"32\" x=\"0.08\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"33\" x=\"1.35\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"34\" x=\"2.62\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"35\" x=\"3.89\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"36\" x=\"5.16\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"37\" x=\"6.43\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"38\" x=\"7.7\" y=\"-9\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"GND\" x=\"0\" y=\"0\" dx=\"6\" dy=\"6\" layer=\"1\"/>\n<wire x1=\"-10.427\" y1=\"6.35\" x2=\"-10.427\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"9.127\" x2=\"-9.4\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"-6.35\" x2=\"-10.427\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-10.427\" y1=\"-9.127\" x2=\"-9.4\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<text x=\"-7.76\" y=\"0\" size=\"0.8128\" layer=\"25\" rot=\"R90\" align=\"center\">&gt;Name</text>\n<text x=\"-6.49\" y=\"0\" size=\"0.8128\" layer=\"27\" rot=\"R90\" align=\"center\">&gt;Value</text>\n<wire x1=\"8.311\" y1=\"9.127\" x2=\"15.327\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.311\" y1=\"-9.127\" x2=\"15.327\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"15.327\" y1=\"9.127\" x2=\"15.327\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n</package>\n<package name=\"ESP-WROOM-32-NARROW\">\n<wire x1=\"-11.57\" y1=\"-9\" x2=\"-11.57\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"-11.57\" y1=\"9\" x2=\"7.93\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"7.93\" y1=\"9\" x2=\"13.93\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"13.93\" y1=\"9\" x2=\"13.93\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"13.93\" y1=\"-9\" x2=\"7.93\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"7.93\" y1=\"-9\" x2=\"-11.57\" y2=\"-9\" width=\"0\" layer=\"51\"/>\n<wire x1=\"7.93\" y1=\"-9\" x2=\"7.93\" y2=\"9\" width=\"0\" layer=\"51\"/>\n<text x=\"10.93\" y=\"0\" size=\"1.27\" layer=\"51\" rot=\"R270\" align=\"center\">Keepout Zone</text>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"9\"/>\n<vertex x=\"6.73\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"6.655\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"6.205\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"6.13\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"9\"/>\n<vertex x=\"5.98\" y=\"8.55\"/>\n<vertex x=\"6.88\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"9\"/>\n<vertex x=\"5.46\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"5.385\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"4.935\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"4.86\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"9\"/>\n<vertex x=\"4.71\" y=\"8.55\"/>\n<vertex x=\"5.61\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"9\"/>\n<vertex x=\"4.19\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"4.115\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"3.665\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"3.59\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"9\"/>\n<vertex x=\"3.44\" y=\"8.55\"/>\n<vertex x=\"4.34\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"9\"/>\n<vertex x=\"2.92\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"2.845\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"2.395\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"2.32\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"9\"/>\n<vertex x=\"2.17\" y=\"8.55\"/>\n<vertex x=\"3.07\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"9\"/>\n<vertex x=\"1.65\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"1.575\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"1.125\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"1.05\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"9\"/>\n<vertex x=\"0.9\" y=\"8.55\"/>\n<vertex x=\"1.8\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"9\"/>\n<vertex x=\"0.38\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"0.305\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-0.145\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-0.22\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"9\"/>\n<vertex x=\"-0.37\" y=\"8.55\"/>\n<vertex x=\"0.53\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"9\"/>\n<vertex x=\"-0.89\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-0.965\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-1.415\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-1.49\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"9\"/>\n<vertex x=\"-1.64\" y=\"8.55\"/>\n<vertex x=\"-0.74\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"9\"/>\n<vertex x=\"-2.16\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-2.235\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-2.685\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-2.76\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"9\"/>\n<vertex x=\"-2.91\" y=\"8.55\"/>\n<vertex x=\"-2.01\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"9\"/>\n<vertex x=\"-3.43\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-3.505\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-3.955\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-4.03\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"9\"/>\n<vertex x=\"-4.18\" y=\"8.55\"/>\n<vertex x=\"-3.28\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"9\"/>\n<vertex x=\"-4.7\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-4.775\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-5.225\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-5.3\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"9\"/>\n<vertex x=\"-5.45\" y=\"8.55\"/>\n<vertex x=\"-4.55\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"9\"/>\n<vertex x=\"-5.97\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-6.045\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-6.495\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-6.57\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"9\"/>\n<vertex x=\"-6.72\" y=\"8.55\"/>\n<vertex x=\"-5.82\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"9\"/>\n<vertex x=\"-7.24\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-7.315\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-7.765\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-7.84\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"9\"/>\n<vertex x=\"-7.99\" y=\"8.55\"/>\n<vertex x=\"-7.09\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"9\"/>\n<vertex x=\"-8.51\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-8.585\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-9.035\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-9.11\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"9\"/>\n<vertex x=\"-9.26\" y=\"8.55\"/>\n<vertex x=\"-8.36\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-9.63\" y=\"9\"/>\n<vertex x=\"-9.78\" y=\"9\" curve=\"-45\"/>\n<vertex x=\"-9.855\" y=\"8.775\" curve=\"-90\"/>\n<vertex x=\"-10.305\" y=\"8.775\" curve=\"-45\"/>\n<vertex x=\"-10.38\" y=\"9\"/>\n<vertex x=\"-10.53\" y=\"9\"/>\n<vertex x=\"-10.53\" y=\"8.55\"/>\n<vertex x=\"-9.63\" y=\"8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"6.88\" y=\"-9\"/>\n<vertex x=\"6.73\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"6.655\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"6.205\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"6.13\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-9\"/>\n<vertex x=\"5.98\" y=\"-8.55\"/>\n<vertex x=\"6.88\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"5.61\" y=\"-9\"/>\n<vertex x=\"5.46\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"5.385\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"4.935\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"4.86\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-9\"/>\n<vertex x=\"4.71\" y=\"-8.55\"/>\n<vertex x=\"5.61\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"4.34\" y=\"-9\"/>\n<vertex x=\"4.19\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"4.115\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"3.665\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"3.59\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-9\"/>\n<vertex x=\"3.44\" y=\"-8.55\"/>\n<vertex x=\"4.34\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"3.07\" y=\"-9\"/>\n<vertex x=\"2.92\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"2.845\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"2.395\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"2.32\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-9\"/>\n<vertex x=\"2.17\" y=\"-8.55\"/>\n<vertex x=\"3.07\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"1.8\" y=\"-9\"/>\n<vertex x=\"1.65\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"1.575\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"1.125\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"1.05\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-9\"/>\n<vertex x=\"0.9\" y=\"-8.55\"/>\n<vertex x=\"1.8\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"0.53\" y=\"-9\"/>\n<vertex x=\"0.38\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"0.305\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-0.145\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-0.22\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-9\"/>\n<vertex x=\"-0.37\" y=\"-8.55\"/>\n<vertex x=\"0.53\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-0.74\" y=\"-9\"/>\n<vertex x=\"-0.89\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-0.965\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-1.415\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-1.49\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-9\"/>\n<vertex x=\"-1.64\" y=\"-8.55\"/>\n<vertex x=\"-0.74\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-2.01\" y=\"-9\"/>\n<vertex x=\"-2.16\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-2.235\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-2.685\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-2.76\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-9\"/>\n<vertex x=\"-2.91\" y=\"-8.55\"/>\n<vertex x=\"-2.01\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-3.28\" y=\"-9\"/>\n<vertex x=\"-3.43\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-3.505\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-3.955\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-4.03\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-9\"/>\n<vertex x=\"-4.18\" y=\"-8.55\"/>\n<vertex x=\"-3.28\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-4.55\" y=\"-9\"/>\n<vertex x=\"-4.7\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-4.775\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-5.225\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-5.3\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-9\"/>\n<vertex x=\"-5.45\" y=\"-8.55\"/>\n<vertex x=\"-4.55\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-5.82\" y=\"-9\"/>\n<vertex x=\"-5.97\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-6.045\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-6.495\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-6.57\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-9\"/>\n<vertex x=\"-6.72\" y=\"-8.55\"/>\n<vertex x=\"-5.82\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-7.09\" y=\"-9\"/>\n<vertex x=\"-7.24\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-7.315\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-7.765\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-7.84\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-9\"/>\n<vertex x=\"-7.99\" y=\"-8.55\"/>\n<vertex x=\"-7.09\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-8.36\" y=\"-9\"/>\n<vertex x=\"-8.51\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-8.585\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-9.035\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-9.11\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-9\"/>\n<vertex x=\"-9.26\" y=\"-8.55\"/>\n<vertex x=\"-8.36\" y=\"-8.55\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-9.63\" y=\"-9\"/>\n<vertex x=\"-9.78\" y=\"-9\" curve=\"45\"/>\n<vertex x=\"-9.855\" y=\"-8.775\" curve=\"90\"/>\n<vertex x=\"-10.305\" y=\"-8.775\" curve=\"45\"/>\n<vertex x=\"-10.38\" y=\"-9\"/>\n<vertex x=\"-10.53\" y=\"-9\"/>\n<vertex x=\"-10.53\" y=\"-8.55\"/>\n<vertex x=\"-9.63\" y=\"-8.55\"/>\n</polygon>\n<smd name=\"1\" x=\"6.43\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"2\" x=\"5.16\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"3\" x=\"3.89\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"4\" x=\"2.62\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"5\" x=\"1.35\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"6\" x=\"0.08\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"7\" x=\"-1.19\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"8\" x=\"-2.46\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"9\" x=\"-3.73\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"10\" x=\"-5\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"11\" x=\"-6.27\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"12\" x=\"-7.54\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"13\" x=\"-8.81\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"14\" x=\"-10.08\" y=\"8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"1.085\"/>\n<vertex x=\"-11.57\" y=\"0.935\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"0.86\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"0.41\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"0.335\"/>\n<vertex x=\"-11.57\" y=\"0.185\"/>\n<vertex x=\"-11.12\" y=\"0.185\"/>\n<vertex x=\"-11.12\" y=\"1.085\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"-0.185\"/>\n<vertex x=\"-11.57\" y=\"-0.335\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"-0.41\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"-0.86\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"-0.935\"/>\n<vertex x=\"-11.57\" y=\"-1.085\"/>\n<vertex x=\"-11.12\" y=\"-1.085\"/>\n<vertex x=\"-11.12\" y=\"-0.185\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"2.355\"/>\n<vertex x=\"-11.57\" y=\"2.205\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"2.13\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"1.68\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"1.605\"/>\n<vertex x=\"-11.57\" y=\"1.455\"/>\n<vertex x=\"-11.12\" y=\"1.455\"/>\n<vertex x=\"-11.12\" y=\"2.355\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"3.625\"/>\n<vertex x=\"-11.57\" y=\"3.475\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"3.4\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"2.95\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"2.875\"/>\n<vertex x=\"-11.57\" y=\"2.725\"/>\n<vertex x=\"-11.12\" y=\"2.725\"/>\n<vertex x=\"-11.12\" y=\"3.625\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"4.895\"/>\n<vertex x=\"-11.57\" y=\"4.745\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"4.67\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"4.22\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"4.145\"/>\n<vertex x=\"-11.57\" y=\"3.995\"/>\n<vertex x=\"-11.12\" y=\"3.995\"/>\n<vertex x=\"-11.12\" y=\"4.895\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"6.165\"/>\n<vertex x=\"-11.57\" y=\"6.015\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"5.94\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"5.49\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"5.415\"/>\n<vertex x=\"-11.57\" y=\"5.265\"/>\n<vertex x=\"-11.12\" y=\"5.265\"/>\n<vertex x=\"-11.12\" y=\"6.165\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"-1.455\"/>\n<vertex x=\"-11.57\" y=\"-1.605\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"-1.68\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"-2.13\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"-2.205\"/>\n<vertex x=\"-11.57\" y=\"-2.355\"/>\n<vertex x=\"-11.12\" y=\"-2.355\"/>\n<vertex x=\"-11.12\" y=\"-1.455\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"-2.725\"/>\n<vertex x=\"-11.57\" y=\"-2.875\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"-2.95\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"-3.4\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"-3.475\"/>\n<vertex x=\"-11.57\" y=\"-3.625\"/>\n<vertex x=\"-11.12\" y=\"-3.625\"/>\n<vertex x=\"-11.12\" y=\"-2.725\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"-3.995\"/>\n<vertex x=\"-11.57\" y=\"-4.145\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"-4.22\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"-4.67\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"-4.745\"/>\n<vertex x=\"-11.57\" y=\"-4.895\"/>\n<vertex x=\"-11.12\" y=\"-4.895\"/>\n<vertex x=\"-11.12\" y=\"-3.995\"/>\n</polygon>\n<polygon width=\"0\" layer=\"51\">\n<vertex x=\"-11.57\" y=\"-5.265\"/>\n<vertex x=\"-11.57\" y=\"-5.415\" curve=\"-45\"/>\n<vertex x=\"-11.345\" y=\"-5.49\" curve=\"-90\"/>\n<vertex x=\"-11.345\" y=\"-5.94\" curve=\"-45\"/>\n<vertex x=\"-11.57\" y=\"-6.015\"/>\n<vertex x=\"-11.57\" y=\"-6.165\"/>\n<vertex x=\"-11.12\" y=\"-6.165\"/>\n<vertex x=\"-11.12\" y=\"-5.265\"/>\n</polygon>\n<smd name=\"15\" x=\"-11.57\" y=\"5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"16\" x=\"-11.57\" y=\"4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"17\" x=\"-11.57\" y=\"3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"18\" x=\"-11.57\" y=\"1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"19\" x=\"-11.57\" y=\"0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"20\" x=\"-11.57\" y=\"-0.635\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"21\" x=\"-11.57\" y=\"-1.905\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"22\" x=\"-11.57\" y=\"-3.175\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"23\" x=\"-11.57\" y=\"-4.445\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"24\" x=\"-11.57\" y=\"-5.715\" dx=\"0.9\" dy=\"1.5\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"25\" x=\"-10.08\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"26\" x=\"-8.81\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"27\" x=\"-7.54\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"28\" x=\"-6.27\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"29\" x=\"-5\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"30\" x=\"-3.73\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"31\" x=\"-2.46\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"32\" x=\"-1.19\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"33\" x=\"0.08\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"34\" x=\"1.35\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"35\" x=\"2.62\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"36\" x=\"3.89\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"37\" x=\"5.16\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"38\" x=\"6.43\" y=\"-8.238\" dx=\"0.9\" dy=\"1.5\" layer=\"1\"/>\n<smd name=\"GND\" x=\"-1.27\" y=\"0\" dx=\"6\" dy=\"6\" layer=\"1\"/>\n<wire x1=\"-11.697\" y1=\"6.35\" x2=\"-11.697\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-11.697\" y1=\"9.127\" x2=\"-10.67\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-11.697\" y1=\"-6.35\" x2=\"-11.697\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-11.697\" y1=\"-9.127\" x2=\"-10.67\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<text x=\"-9.03\" y=\"0\" size=\"0.8128\" layer=\"25\" rot=\"R90\" align=\"center\">&gt;Name</text>\n<text x=\"-7.76\" y=\"0\" size=\"0.8128\" layer=\"27\" rot=\"R90\" align=\"center\">&gt;Value</text>\n<wire x1=\"7.041\" y1=\"9.127\" x2=\"14.057\" y2=\"9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"7.041\" y1=\"-9.127\" x2=\"14.057\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"14.057\" y1=\"9.127\" x2=\"14.057\" y2=\"-9.127\" width=\"0.2032\" layer=\"21\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"ESP-WROOM-32\">\n<pin name=\"GND@1\" x=\"-17.78\" y=\"-27.94\" length=\"short\"/>\n<pin name=\"3V3\" x=\"-17.78\" y=\"33.02\" length=\"short\"/>\n<pin name=\"EN\" x=\"-17.78\" y=\"30.48\" length=\"short\"/>\n<pin name=\"SENSOR_VP/I36\" x=\"17.78\" y=\"-33.02\" length=\"short\" rot=\"R180\"/>\n<pin name=\"SENSOR_VN/I39\" x=\"17.78\" y=\"-35.56\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO34\" x=\"17.78\" y=\"-27.94\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO35\" x=\"17.78\" y=\"-30.48\" length=\"short\" rot=\"R180\"/>\n<pin name=\"XTAL_P/IO32\" x=\"17.78\" y=\"-22.86\" length=\"short\" rot=\"R180\"/>\n<pin name=\"XTAL_N/IO33\" x=\"17.78\" y=\"-25.4\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO25\" x=\"17.78\" y=\"-15.24\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO26\" x=\"17.78\" y=\"-17.78\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO27\" x=\"17.78\" y=\"-20.32\" length=\"short\" rot=\"R180\"/>\n<pin name=\"SCK_H/IO14\" x=\"17.78\" y=\"10.16\" length=\"short\" rot=\"R180\"/>\n<pin name=\"MISO_H/IO12\" x=\"17.78\" y=\"15.24\" length=\"short\" rot=\"R180\"/>\n<pin name=\"GND@15\" x=\"-17.78\" y=\"-30.48\" length=\"short\"/>\n<pin name=\"MOSI_H/IO13\" x=\"17.78\" y=\"12.7\" length=\"short\" rot=\"R180\"/>\n<pin name=\"SHD/IO9\" x=\"-17.78\" y=\"15.24\" length=\"short\"/>\n<pin name=\"SWP/IO10\" x=\"-17.78\" y=\"12.7\" length=\"short\"/>\n<pin name=\"SCS/IO11\" x=\"-17.78\" y=\"10.16\" length=\"short\"/>\n<pin name=\"GND@38\" x=\"-17.78\" y=\"-33.02\" length=\"short\"/>\n<pin name=\"MOSI_V/IO23\" x=\"17.78\" y=\"-12.7\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO22\" x=\"17.78\" y=\"-10.16\" length=\"short\" rot=\"R180\"/>\n<pin name=\"TXD\" x=\"17.78\" y=\"33.02\" length=\"short\" rot=\"R180\"/>\n<pin name=\"RXD\" x=\"17.78\" y=\"30.48\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO21\" x=\"17.78\" y=\"-7.62\" length=\"short\" rot=\"R180\"/>\n<pin name=\"NC\" x=\"17.78\" y=\"-5.08\" length=\"short\" rot=\"R180\"/>\n<pin name=\"MISO_V/IO19\" x=\"17.78\" y=\"-2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"SCK_V/IO18\" x=\"17.78\" y=\"0\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CS0_V/IO5\" x=\"17.78\" y=\"17.78\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO17\" x=\"17.78\" y=\"2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO16\" x=\"17.78\" y=\"5.08\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO4\" x=\"17.78\" y=\"20.32\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO0\" x=\"17.78\" y=\"25.4\" length=\"short\" rot=\"R180\"/>\n<pin name=\"IO2\" x=\"17.78\" y=\"22.86\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CS0_H/IO15\" x=\"17.78\" y=\"7.62\" length=\"short\" rot=\"R180\"/>\n<pin name=\"SDI/IO8\" x=\"-17.78\" y=\"2.54\" length=\"short\"/>\n<pin name=\"SDO/IO7\" x=\"-17.78\" y=\"5.08\" length=\"short\"/>\n<pin name=\"SCK/IO6\" x=\"-17.78\" y=\"7.62\" length=\"short\"/>\n<pin name=\"GND\" x=\"-17.78\" y=\"-35.56\" length=\"short\"/>\n<wire x1=\"-15.24\" y1=\"-38.1\" x2=\"-15.24\" y2=\"35.56\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-15.24\" y1=\"35.56\" x2=\"15.24\" y2=\"35.56\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"15.24\" y1=\"35.56\" x2=\"15.24\" y2=\"-38.1\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"15.24\" y1=\"-38.1\" x2=\"-15.24\" y2=\"-38.1\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-15.24\" y=\"35.814\" size=\"1.778\" layer=\"95\">&gt;Name</text>\n<text x=\"-15.24\" y=\"-38.354\" size=\"1.778\" layer=\"96\" align=\"top-left\">&gt;Value</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"ESP-WROOM-32\" prefix=\"U\">\n<gates>\n<gate name=\"G$1\" symbol=\"ESP-WROOM-32\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"ESP-WROOM-32\">\n<connects>\n<connect gate=\"G$1\" pin=\"3V3\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"CS0_H/IO15\" pad=\"23\"/>\n<connect gate=\"G$1\" pin=\"CS0_V/IO5\" pad=\"29\"/>\n<connect gate=\"G$1\" pin=\"EN\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"GND\"/>\n<connect gate=\"G$1\" pin=\"GND@1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"GND@15\" pad=\"15\"/>\n<connect gate=\"G$1\" pin=\"GND@38\" pad=\"38\"/>\n<connect gate=\"G$1\" pin=\"IO0\" pad=\"25\"/>\n<connect gate=\"G$1\" pin=\"IO16\" pad=\"27\"/>\n<connect gate=\"G$1\" pin=\"IO17\" pad=\"28\"/>\n<connect gate=\"G$1\" pin=\"IO2\" pad=\"24\"/>\n<connect gate=\"G$1\" pin=\"IO21\" pad=\"33\"/>\n<connect gate=\"G$1\" pin=\"IO22\" pad=\"36\"/>\n<connect gate=\"G$1\" pin=\"IO25\" pad=\"10\"/>\n<connect gate=\"G$1\" pin=\"IO26\" pad=\"11\"/>\n<connect gate=\"G$1\" pin=\"IO27\" pad=\"12\"/>\n<connect gate=\"G$1\" pin=\"IO34\" pad=\"6\"/>\n<connect gate=\"G$1\" pin=\"IO35\" pad=\"7\"/>\n<connect gate=\"G$1\" pin=\"IO4\" pad=\"26\"/>\n<connect gate=\"G$1\" pin=\"MISO_H/IO12\" pad=\"14\"/>\n<connect gate=\"G$1\" pin=\"MISO_V/IO19\" pad=\"31\"/>\n<connect gate=\"G$1\" pin=\"MOSI_H/IO13\" pad=\"16\"/>\n<connect gate=\"G$1\" pin=\"MOSI_V/IO23\" pad=\"37\"/>\n<connect gate=\"G$1\" pin=\"NC\" pad=\"32\"/>\n<connect gate=\"G$1\" pin=\"RXD\" pad=\"34\"/>\n<connect gate=\"G$1\" pin=\"SCK/IO6\" pad=\"20\"/>\n<connect gate=\"G$1\" pin=\"SCK_H/IO14\" pad=\"13\"/>\n<connect gate=\"G$1\" pin=\"SCK_V/IO18\" pad=\"30\"/>\n<connect gate=\"G$1\" pin=\"SCS/IO11\" pad=\"19\"/>\n<connect gate=\"G$1\" pin=\"SDI/IO8\" pad=\"22\"/>\n<connect gate=\"G$1\" pin=\"SDO/IO7\" pad=\"21\"/>\n<connect gate=\"G$1\" pin=\"SENSOR_VN/I39\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"SENSOR_VP/I36\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"SHD/IO9\" pad=\"17\"/>\n<connect gate=\"G$1\" pin=\"SWP/IO10\" pad=\"18\"/>\n<connect gate=\"G$1\" pin=\"TXD\" pad=\"35\"/>\n<connect gate=\"G$1\" pin=\"XTAL_N/IO33\" pad=\"9\"/>\n<connect gate=\"G$1\" pin=\"XTAL_P/IO32\" pad=\"8\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"IC-13849\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"NARROW\" package=\"ESP-WROOM-32-NARROW\">\n<connects>\n<connect gate=\"G$1\" pin=\"3V3\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"CS0_H/IO15\" pad=\"23\"/>\n<connect gate=\"G$1\" pin=\"CS0_V/IO5\" pad=\"29\"/>\n<connect gate=\"G$1\" pin=\"EN\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"GND\"/>\n<connect gate=\"G$1\" pin=\"GND@1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"GND@15\" pad=\"15\"/>\n<connect gate=\"G$1\" pin=\"GND@38\" pad=\"38\"/>\n<connect gate=\"G$1\" pin=\"IO0\" pad=\"25\"/>\n<connect gate=\"G$1\" pin=\"IO16\" pad=\"27\"/>\n<connect gate=\"G$1\" pin=\"IO17\" pad=\"28\"/>\n<connect gate=\"G$1\" pin=\"IO2\" pad=\"24\"/>\n<connect gate=\"G$1\" pin=\"IO21\" pad=\"33\"/>\n<connect gate=\"G$1\" pin=\"IO22\" pad=\"36\"/>\n<connect gate=\"G$1\" pin=\"IO25\" pad=\"10\"/>\n<connect gate=\"G$1\" pin=\"IO26\" pad=\"11\"/>\n<connect gate=\"G$1\" pin=\"IO27\" pad=\"12\"/>\n<connect gate=\"G$1\" pin=\"IO34\" pad=\"6\"/>\n<connect gate=\"G$1\" pin=\"IO35\" pad=\"7\"/>\n<connect gate=\"G$1\" pin=\"IO4\" pad=\"26\"/>\n<connect gate=\"G$1\" pin=\"MISO_H/IO12\" pad=\"14\"/>\n<connect gate=\"G$1\" pin=\"MISO_V/IO19\" pad=\"31\"/>\n<connect gate=\"G$1\" pin=\"MOSI_H/IO13\" pad=\"16\"/>\n<connect gate=\"G$1\" pin=\"MOSI_V/IO23\" pad=\"37\"/>\n<connect gate=\"G$1\" pin=\"NC\" pad=\"32\"/>\n<connect gate=\"G$1\" pin=\"RXD\" pad=\"34\"/>\n<connect gate=\"G$1\" pin=\"SCK/IO6\" pad=\"20\"/>\n<connect gate=\"G$1\" pin=\"SCK_H/IO14\" pad=\"13\"/>\n<connect gate=\"G$1\" pin=\"SCK_V/IO18\" pad=\"30\"/>\n<connect gate=\"G$1\" pin=\"SCS/IO11\" pad=\"19\"/>\n<connect gate=\"G$1\" pin=\"SDI/IO8\" pad=\"22\"/>\n<connect gate=\"G$1\" pin=\"SDO/IO7\" pad=\"21\"/>\n<connect gate=\"G$1\" pin=\"SENSOR_VN/I39\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"SENSOR_VP/I36\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"SHD/IO9\" pad=\"17\"/>\n<connect gate=\"G$1\" pin=\"SWP/IO10\" pad=\"18\"/>\n<connect gate=\"G$1\" pin=\"TXD\" pad=\"35\"/>\n<connect gate=\"G$1\" pin=\"XTAL_N/IO33\" pad=\"9\"/>\n<connect gate=\"G$1\" pin=\"XTAL_P/IO32\" pad=\"8\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"IC-13849\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-Resistors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"AXIAL-0.3\">\n<description>&lt;h3&gt;AXIAL-0.3&lt;/h3&gt;\n&lt;p&gt;Commonly used for 1/4W through-hole resistors. 0.3\" pitch between holes.&lt;/p&gt;</description>\n<wire x1=\"-2.54\" y1=\"0.762\" x2=\"2.54\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"0.762\" x2=\"2.54\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.54\" y2=\"-0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-0.762\" x2=\"-2.54\" y2=\"-0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"-0.762\" x2=\"-2.54\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-2.54\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.794\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-2.794\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-3.81\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\"/>\n<pad name=\"P$2\" x=\"3.81\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\"/>\n<text x=\"0\" y=\"1.016\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;Name</text>\n<text x=\"0\" y=\"-1.016\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;Value</text>\n</package>\n<package name=\"AXIAL-0.1\">\n<description>&lt;h3&gt;AXIAL-0.1&lt;/h3&gt;\n&lt;p&gt;Commonly used for 1/4W through-hole resistors. 0.1\" pitch between holes.&lt;/p&gt;</description>\n<wire x1=\"0\" y1=\"-0.762\" x2=\"0\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.254\" y1=\"0\" x2=\"0\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"-0.254\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-1.27\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\"/>\n<pad name=\"P$2\" x=\"1.27\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\"/>\n<text x=\"0\" y=\"1.143\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;Name</text>\n<text x=\"0\" y=\"-1.143\" size=\"0.6096\" layer=\"21\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;Value</text>\n</package>\n<package name=\"AXIAL-0.1-KIT\">\n<description>&lt;h3&gt;AXIAL-0.1-KIT&lt;/h3&gt;\n&lt;p&gt;Commonly used for 1/4W through-hole resistors. 0.1\" pitch between holes.&lt;/p&gt;\n&lt;p&gt;&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.&lt;/p&gt;</description>\n<wire x1=\"0\" y1=\"-0.762\" x2=\"0\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.254\" y1=\"0\" x2=\"0\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"-0.254\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-1.27\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\" stop=\"no\"/>\n<pad name=\"P$2\" x=\"1.27\" y=\"0\" drill=\"0.9\" diameter=\"1.8796\" stop=\"no\"/>\n<text x=\"0\" y=\"1.143\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;Name</text>\n<text x=\"0\" y=\"-1.143\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;Value</text>\n<circle x=\"-1.27\" y=\"0\" radius=\"0.4572\" width=\"0\" layer=\"29\"/>\n<circle x=\"-1.27\" y=\"0\" radius=\"1.016\" width=\"0\" layer=\"30\"/>\n<circle x=\"1.27\" y=\"0\" radius=\"1.016\" width=\"0\" layer=\"30\"/>\n<circle x=\"-1.27\" y=\"0\" radius=\"0.4572\" width=\"0\" layer=\"29\"/>\n<circle x=\"1.27\" y=\"0\" radius=\"0.4572\" width=\"0\" layer=\"29\"/>\n</package>\n<package name=\"AXIAL-0.3-KIT\">\n<description>&lt;h3&gt;AXIAL-0.3-KIT&lt;/h3&gt;\n&lt;p&gt;Commonly used for 1/4W through-hole resistors. 0.3\" pitch between holes.&lt;/p&gt;\n&lt;p&gt;&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.&lt;/p&gt;</description>\n<wire x1=\"-2.54\" y1=\"1.27\" x2=\"2.54\" y2=\"1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"1.27\" x2=\"2.54\" y2=\"0\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.54\" y2=\"-1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-1.27\" x2=\"-2.54\" y2=\"-1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"-1.27\" x2=\"-2.54\" y2=\"0\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-2.54\" y2=\"1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.794\" y2=\"0\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-2.794\" y2=\"0\" width=\"0.254\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-3.81\" y=\"0\" drill=\"1.016\" diameter=\"2.032\" stop=\"no\"/>\n<pad name=\"P$2\" x=\"3.81\" y=\"0\" drill=\"1.016\" diameter=\"2.032\" stop=\"no\"/>\n<text x=\"0\" y=\"1.524\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.524\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"3.8201\" y=\"-0.9449\" curve=\"-90\"/>\n<vertex x=\"2.8652\" y=\"-0.0152\" curve=\"-90.011749\"/>\n<vertex x=\"3.8176\" y=\"0.9602\" curve=\"-90\"/>\n<vertex x=\"4.7676\" y=\"-0.0178\" curve=\"-90.024193\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"3.8176\" y=\"-0.4369\" curve=\"-90.012891\"/>\n<vertex x=\"3.3731\" y=\"-0.0127\" curve=\"-90\"/>\n<vertex x=\"3.8176\" y=\"0.4546\" curve=\"-90\"/>\n<vertex x=\"4.2595\" y=\"-0.0025\" curve=\"-90.012967\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-3.8075\" y=\"-0.9525\" curve=\"-90\"/>\n<vertex x=\"-4.7624\" y=\"-0.0228\" curve=\"-90.011749\"/>\n<vertex x=\"-3.81\" y=\"0.9526\" curve=\"-90\"/>\n<vertex x=\"-2.86\" y=\"-0.0254\" curve=\"-90.024193\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"-3.81\" y=\"-0.4445\" curve=\"-90.012891\"/>\n<vertex x=\"-4.2545\" y=\"-0.0203\" curve=\"-90\"/>\n<vertex x=\"-3.81\" y=\"0.447\" curve=\"-90\"/>\n<vertex x=\"-3.3681\" y=\"-0.0101\" curve=\"-90.012967\"/>\n</polygon>\n</package>\n<package name=\"0603\">\n<description>&lt;p&gt;&lt;b&gt;Generic 1608 (0603) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"0\" y=\"0.762\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.762\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"RESISTOR\">\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-2.159\" y2=\"1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-2.159\" y1=\"1.016\" x2=\"-1.524\" y2=\"-1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-1.524\" y1=\"-1.016\" x2=\"-0.889\" y2=\"1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-0.889\" y1=\"1.016\" x2=\"-0.254\" y2=\"-1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-0.254\" y1=\"-1.016\" x2=\"0.381\" y2=\"1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0.381\" y1=\"1.016\" x2=\"1.016\" y2=\"-1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.016\" y1=\"-1.016\" x2=\"1.651\" y2=\"1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.651\" y1=\"1.016\" x2=\"2.286\" y2=\"-1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.286\" y1=\"-1.016\" x2=\"2.54\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<text x=\"0\" y=\"1.524\" size=\"1.778\" layer=\"95\" font=\"vector\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.524\" size=\"1.778\" layer=\"96\" font=\"vector\" align=\"top-center\">&gt;VALUE</text>\n<pin name=\"2\" x=\"5.08\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R180\"/>\n<pin name=\"1\" x=\"-5.08\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"10KOHM\" prefix=\"R\">\n<description>&lt;h3&gt;10kΩ resistor&lt;/h3&gt;\n&lt;p&gt;A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"RESISTOR\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-HORIZ-1/4W-1%\" package=\"AXIAL-0.3\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-12183\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"10k\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT-1/4W-1%\" package=\"AXIAL-0.1\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-12183\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT_KIT-1/4W-1%\" package=\"AXIAL-0.1-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-12183\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"10k\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT-1/4W-5%\" package=\"AXIAL-0.1\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09435\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT_KIT-1/4W-5%\" package=\"AXIAL-0.1-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09435\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-HORIZ-1/4W-5%\" package=\"AXIAL-0.3\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09435\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-HORIZ_KIT-1/4W-5%\" package=\"AXIAL-0.3-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09435\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-HORIZ_KIT-1/4W-1%\" package=\"AXIAL-0.3-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-12183\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT-1/6W-5%\" package=\"AXIAL-0.1\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08375\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-VERT_KIT-1/6W-5%\" package=\"AXIAL-0.1-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08375\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-HORIZ-1/6W-5%\" package=\"AXIAL-0.3\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08375\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-HORIZ_KIT-1/6W-5%\" package=\"AXIAL-0.3-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08375\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0603-1/10W-1%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-00824\"/>\n<attribute name=\"VALUE\" value=\"10k\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"2.0KOHM1/10W5%(0603)\" prefix=\"R\" uservalue=\"yes\">\n<description>RES-08296</description>\n<gates>\n<gate name=\"G$1\" symbol=\"RESISTOR\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08296\"/>\n<attribute name=\"VALUE\" value=\"2.0k\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"27OHM1/10W1%(0603)\" prefix=\"R\" uservalue=\"yes\">\n<description>RES-09334</description>\n<gates>\n<gate name=\"G$1\" symbol=\"RESISTOR\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09334\"/>\n<attribute name=\"VALUE\" value=\"27\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"0603-RES\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-09334\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-Capacitors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"0402\">\n<description>&lt;p&gt;&lt;b&gt;Generic 1005 (0402) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-0.2704\" y1=\"0.2286\" x2=\"0.2704\" y2=\"0.2286\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.2704\" y1=\"-0.2286\" x2=\"-0.2704\" y2=\"-0.2286\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.2\" y1=\"0.65\" x2=\"1.2\" y2=\"0.65\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.2\" y1=\"0.65\" x2=\"1.2\" y2=\"-0.65\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.2\" y1=\"-0.65\" x2=\"-1.2\" y2=\"-0.65\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.2\" y1=\"-0.65\" x2=\"-1.2\" y2=\"0.65\" width=\"0.0508\" layer=\"39\"/>\n<smd name=\"1\" x=\"-0.58\" y=\"0\" dx=\"0.85\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.58\" y=\"0\" dx=\"0.85\" dy=\"0.9\" layer=\"1\"/>\n<text x=\"0\" y=\"0.762\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.762\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-0.554\" y1=\"-0.3048\" x2=\"-0.254\" y2=\"0.3048\" layer=\"51\"/>\n<rectangle x1=\"0.2588\" y1=\"-0.3048\" x2=\"0.5588\" y2=\"0.3048\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n<package name=\"0603\">\n<description>&lt;p&gt;&lt;b&gt;Generic 1608 (0603) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"0.7\" x2=\"1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"-0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.6\" y1=\"-0.7\" x2=\"-1.6\" y2=\"0.7\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"0\" y=\"0.762\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.762\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n<package name=\"CAP-PTH-SMALL-KIT\">\n<description>&lt;h3&gt;CAP-PTH-SMALL-KIT&lt;/h3&gt;\nCommonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>\n<wire x1=\"0\" y1=\"0.635\" x2=\"0\" y2=\"-0.635\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-2.667\" y1=\"1.27\" x2=\"2.667\" y2=\"1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.667\" y1=\"1.27\" x2=\"2.667\" y2=\"-1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"2.667\" y1=\"-1.27\" x2=\"-2.667\" y2=\"-1.27\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-2.667\" y1=\"-1.27\" x2=\"-2.667\" y2=\"1.27\" width=\"0.254\" layer=\"21\"/>\n<pad name=\"1\" x=\"-1.397\" y=\"0\" drill=\"1.016\" diameter=\"2.032\" stop=\"no\"/>\n<pad name=\"2\" x=\"1.397\" y=\"0\" drill=\"1.016\" diameter=\"2.032\" stop=\"no\"/>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-1.4021\" y=\"-0.9475\" curve=\"-90\"/>\n<vertex x=\"-2.357\" y=\"-0.0178\" curve=\"-90.011749\"/>\n<vertex x=\"-1.4046\" y=\"0.9576\" curve=\"-90\"/>\n<vertex x=\"-0.4546\" y=\"-0.0204\" curve=\"-90.024193\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"-1.4046\" y=\"-0.4395\" curve=\"-90.012891\"/>\n<vertex x=\"-1.8491\" y=\"-0.0153\" curve=\"-90\"/>\n<vertex x=\"-1.4046\" y=\"0.452\" curve=\"-90\"/>\n<vertex x=\"-0.9627\" y=\"-0.0051\" curve=\"-90.012967\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"1.397\" y=\"-0.9475\" curve=\"-90\"/>\n<vertex x=\"0.4421\" y=\"-0.0178\" curve=\"-90.011749\"/>\n<vertex x=\"1.3945\" y=\"0.9576\" curve=\"-90\"/>\n<vertex x=\"2.3445\" y=\"-0.0204\" curve=\"-90.024193\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"1.3945\" y=\"-0.4395\" curve=\"-90.012891\"/>\n<vertex x=\"0.95\" y=\"-0.0153\" curve=\"-90\"/>\n<vertex x=\"1.3945\" y=\"0.452\" curve=\"-90\"/>\n<vertex x=\"1.8364\" y=\"-0.0051\" curve=\"-90.012967\"/>\n</polygon>\n</package>\n<package name=\"1206\">\n<description>&lt;p&gt;&lt;b&gt;Generic 3216 (1206) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-2.4\" y1=\"1.1\" x2=\"2.4\" y2=\"1.1\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"2.4\" y1=\"-1.1\" x2=\"-2.4\" y2=\"-1.1\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-2.4\" y1=\"-1.1\" x2=\"-2.4\" y2=\"1.1\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"2.4\" y1=\"1.1\" x2=\"2.4\" y2=\"-1.1\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.965\" y1=\"0.787\" x2=\"0.965\" y2=\"0.787\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.965\" y1=\"-0.787\" x2=\"0.965\" y2=\"-0.787\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.4\" y=\"0\" dx=\"1.6\" dy=\"1.8\" layer=\"1\"/>\n<smd name=\"2\" x=\"1.4\" y=\"0\" dx=\"1.6\" dy=\"1.8\" layer=\"1\"/>\n<text x=\"0\" y=\"1.143\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.143\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<rectangle x1=\"-1.7018\" y1=\"-0.8509\" x2=\"-0.9517\" y2=\"0.8491\" layer=\"51\"/>\n<rectangle x1=\"0.9517\" y1=\"-0.8491\" x2=\"1.7018\" y2=\"0.8509\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.4001\" x2=\"0.1999\" y2=\"0.4001\" layer=\"35\"/>\n</package>\n<package name=\"0805\">\n<description>&lt;p&gt;&lt;b&gt;Generic 2012 (0805) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<smd name=\"1\" x=\"-0.9\" y=\"0\" dx=\"0.8\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.9\" y=\"0\" dx=\"0.8\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"0\" y=\"0.889\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-0.889\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<wire x1=\"-1.5\" y1=\"0.8\" x2=\"1.5\" y2=\"0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.5\" y1=\"0.8\" x2=\"1.5\" y2=\"-0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.5\" y1=\"-0.8\" x2=\"-1.5\" y2=\"-0.8\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.5\" y1=\"-0.8\" x2=\"-1.5\" y2=\"0.8\" width=\"0.0508\" layer=\"39\"/>\n</package>\n<package name=\"1210\">\n<description>&lt;p&gt;&lt;b&gt;Generic 3225 (1210) package&lt;/b&gt;&lt;/p&gt;\n&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>\n<wire x1=\"-1.5365\" y1=\"1.1865\" x2=\"1.5365\" y2=\"1.1865\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5365\" y1=\"1.1865\" x2=\"1.5365\" y2=\"-1.1865\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5365\" y1=\"-1.1865\" x2=\"-1.5365\" y2=\"-1.1865\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.5365\" y1=\"-1.1865\" x2=\"-1.5365\" y2=\"1.1865\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.755\" y=\"0\" dx=\"1.27\" dy=\"2.06\" layer=\"1\"/>\n<smd name=\"2\" x=\"1.755\" y=\"0\" dx=\"1.27\" dy=\"2.06\" layer=\"1\"/>\n<text x=\"0\" y=\"1.397\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.397\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n<wire x1=\"-2.59\" y1=\"1.45\" x2=\"2.59\" y2=\"1.45\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"2.59\" y1=\"1.45\" x2=\"2.59\" y2=\"-1.45\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"2.59\" y1=\"-1.45\" x2=\"-2.59\" y2=\"-1.45\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-2.59\" y1=\"-1.45\" x2=\"-2.59\" y2=\"1.45\" width=\"0.0508\" layer=\"39\"/>\n</package>\n<package name=\"0603-CAP\">\n<wire x1=\"-1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"0\" y1=\"0.027940625\" x2=\"0\" y2=\"-0.027940625\" width=\"0.381\" layer=\"21\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"0.762\" size=\"0.4064\" layer=\"25\" font=\"vector\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-1.143\" size=\"0.4064\" layer=\"27\" font=\"vector\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"CAP\">\n<wire x1=\"0\" y1=\"2.54\" x2=\"0\" y2=\"2.032\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"0.508\" width=\"0.1524\" layer=\"94\"/>\n<text x=\"1.524\" y=\"2.921\" size=\"1.778\" layer=\"95\" font=\"vector\">&gt;NAME</text>\n<text x=\"1.524\" y=\"-2.159\" size=\"1.778\" layer=\"96\" font=\"vector\">&gt;VALUE</text>\n<rectangle x1=\"-2.032\" y1=\"0.508\" x2=\"2.032\" y2=\"1.016\" layer=\"94\"/>\n<rectangle x1=\"-2.032\" y1=\"1.524\" x2=\"2.032\" y2=\"2.032\" layer=\"94\"/>\n<pin name=\"1\" x=\"0\" y=\"5.08\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R270\"/>\n<pin name=\"2\" x=\"0\" y=\"-2.54\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R90\"/>\n</symbol>\n<symbol name=\"CAP@1\">\n<wire x1=\"0\" y1=\"2.54\" x2=\"0\" y2=\"2.032\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"0.508\" width=\"0.1524\" layer=\"94\"/>\n<text x=\"1.524\" y=\"2.921\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"1.524\" y=\"-2.159\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<rectangle x1=\"-2.032\" y1=\"0.508\" x2=\"2.032\" y2=\"1.016\" layer=\"94\"/>\n<rectangle x1=\"-2.032\" y1=\"1.524\" x2=\"2.032\" y2=\"2.032\" layer=\"94\"/>\n<pin name=\"1\" x=\"0\" y=\"5.08\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R270\"/>\n<pin name=\"2\" x=\"0\" y=\"-2.54\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\" rot=\"R90\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"0.1UF\" prefix=\"C\">\n<description>&lt;h3&gt;0.1µF ceramic capacitors&lt;/h3&gt;\n&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-0402-16V-10%\" package=\"0402\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-12416\"/>\n<attribute name=\"VALUE\" value=\"0.1uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0603-25V-(+80/-20%)\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-00810\"/>\n<attribute name=\"VALUE\" value=\"0.1uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0603-25V-5%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08604\"/>\n<attribute name=\"VALUE\" value=\"0.1uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-KIT-EZ-50V-20%\" package=\"CAP-PTH-SMALL-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08370\"/>\n<attribute name=\"VALUE\" value=\"0.1uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0603-100V-10%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08390\"/>\n<attribute name=\"VALUE\" value=\"0.1uF\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"10UF\" prefix=\"C\">\n<description>&lt;h3&gt;10.0µF ceramic capacitors&lt;/h3&gt;\n&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-0603-6.3V-20%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-11015\"/>\n<attribute name=\"VALUE\" value=\"10uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-1206-6.3V-20%\" package=\"1206\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-10057\"/>\n<attribute name=\"VALUE\" value=\"10uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0805-10V-10%\" package=\"0805\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-11330\"/>\n<attribute name=\"VALUE\" value=\"10uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-1210-50V-20%\" package=\"1210\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-09824\"/>\n<attribute name=\"VALUE\" value=\"10uF\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"4.7UF\" prefix=\"C\">\n<description>&lt;h3&gt;4.7µF ceramic capacitors&lt;/h3&gt;\n&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP\" x=\"0\" y=\"-2.54\"/>\n</gates>\n<devices>\n<device name=\"0603\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08280\"/>\n<attribute name=\"VALUE\" value=\"4.7uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-1206-16V-(+80/-20%)\" package=\"1206\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"47PF\" prefix=\"C\">\n<description>&lt;h3&gt;47pF ceramic capacitors&lt;/h3&gt;\n&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-0603-50V-5%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08913\"/>\n<attribute name=\"VALUE\" value=\"47pF\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"4.7UF-6.3V-10%(0603)\" prefix=\"C\" uservalue=\"yes\">\n<description>CAP-08280</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP@1\" x=\"0\" y=\"-2.54\"/>\n</gates>\n<devices>\n<device name=\"0603\" package=\"0603-CAP\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08280\"/>\n<attribute name=\"VALUE\" value=\"4.7uF\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"1.0UF\" prefix=\"C\">\n<description>&lt;h3&gt;1µF ceramic capacitors&lt;/h3&gt;\n&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"CAP\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-0603-16V-10%\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-00868\"/>\n<attribute name=\"VALUE\" value=\"1.0uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0402-16V-10%\" package=\"0402\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-12417\"/>\n<attribute name=\"VALUE\" value=\"1.0uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0805-25V-(+80/-20%)\" package=\"0805\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-11625\"/>\n<attribute name=\"VALUE\" value=\"1.0uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-1206-50V-10%\" package=\"1206\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-09822\"/>\n<attribute name=\"VALUE\" value=\"1.0uF\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-0805-25V-10%\" package=\"0805\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CAP-08064\"/>\n<attribute name=\"VALUE\" value=\"1.0uF\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-PowerSymbols\">\n<description>&lt;h3&gt;SparkFun Power Symbols&lt;/h3&gt;\nThis library contains power, ground, and voltage-supply symbols.\n&lt;br&gt;\n&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. \n&lt;br&gt;\n&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=\" www.sparkfun.com\"&gt;SparkFun.com&lt;/a&gt;.\n&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;\n&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n</packages>\n<symbols>\n<symbol name=\"3.3V\">\n<description>&lt;h3&gt;3.3V Voltage Supply&lt;/h3&gt;</description>\n<wire x1=\"0.762\" y1=\"1.27\" x2=\"0\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"-0.762\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<pin name=\"3.3V\" x=\"0\" y=\"0\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R90\"/>\n<text x=\"0\" y=\"2.794\" size=\"1.778\" layer=\"96\" align=\"bottom-center\">&gt;VALUE</text>\n</symbol>\n<symbol name=\"DGND\">\n<description>&lt;h3&gt;Digital Ground Supply&lt;/h3&gt;</description>\n<wire x1=\"-1.905\" y1=\"0\" x2=\"1.905\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<pin name=\"GND\" x=\"0\" y=\"2.54\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R270\"/>\n<text x=\"0\" y=\"-0.254\" size=\"1.778\" layer=\"96\" align=\"top-center\">&gt;VALUE</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"3.3V\" prefix=\"SUPPLY\">\n<description>&lt;h3&gt;3.3V Supply Symbol&lt;/h3&gt;\n&lt;p&gt;Power supply symbol for a specifically-stated 3.3V source.&lt;/p&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"3.3V\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"GND\" prefix=\"GND\">\n<description>&lt;h3&gt;Ground Supply Symbol&lt;/h3&gt;\n&lt;p&gt;Generic signal ground supply symbol.&lt;/p&gt;</description>\n<gates>\n<gate name=\"1\" symbol=\"DGND\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"esp32-thing-temp\">\n<packages>\n<package name=\"SC70-6\">\n<description>&lt;h3&gt;SC-88/SC70-6/SOT-363 6-pin Package&lt;/h3&gt;\n&lt;p&gt;&lt;a href=\"http://www.onsemi.com/pub_link/Collateral/MBT3904DW1T1-D.PDF\"&gt;Example Datasheet&lt;/a&gt;&lt;/p&gt;</description>\n<circle x=\"-1.3335\" y=\"-1.016\" radius=\"0.254\" width=\"0\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"0.625\" x2=\"-1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"0.625\" x2=\"-1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1\" y1=\"-0.625\" x2=\"1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.1176\" y1=\"0.7493\" x2=\"-1.1176\" y2=\"-0.6223\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.1176\" y1=\"-0.7493\" x2=\"1.1176\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.9779\" y1=\"0.7493\" x2=\"-1.1176\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.1176\" y1=\"0.7493\" x2=\"0.9779\" y2=\"0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.1176\" y1=\"-0.6223\" x2=\"-0.9779\" y2=\"-0.7493\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.9779\" y1=\"-0.7493\" x2=\"1.1176\" y2=\"-0.7493\" width=\"0.2032\" layer=\"21\"/>\n<rectangle x1=\"-0.1016\" y1=\"0.6858\" x2=\"0.1016\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.1016\" y1=\"-1.0414\" x2=\"0.1016\" y2=\"-0.6858\" layer=\"51\"/>\n<rectangle x1=\"0.5484\" y1=\"0.6858\" x2=\"0.7516\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.7516\" y1=\"0.6858\" x2=\"-0.5484\" y2=\"1.0414\" layer=\"51\"/>\n<rectangle x1=\"-0.7516\" y1=\"-1.0414\" x2=\"-0.5484\" y2=\"-0.6858\" layer=\"51\"/>\n<rectangle x1=\"0.5484\" y1=\"-1.0414\" x2=\"0.7516\" y2=\"-0.6858\" layer=\"51\"/>\n<smd name=\"4\" x=\"0.65\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<smd name=\"2\" x=\"0\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"1\" x=\"-0.65\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"0.65\" y=\"-0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"5\" x=\"0\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<smd name=\"6\" x=\"-0.65\" y=\"0.92\" dx=\"0.3\" dy=\"0.66\" layer=\"1\"/>\n<text x=\"0\" y=\"1.397\" size=\"0.6096\" layer=\"25\" font=\"vector\" ratio=\"20\" align=\"bottom-center\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.397\" size=\"0.6096\" layer=\"27\" font=\"vector\" ratio=\"20\" align=\"top-center\">&gt;VALUE</text>\n</package>\n</packages>\n<symbols>\n<symbol name=\"NPN\">\n<rectangle x1=\"-0.254\" y1=\"-2.54\" x2=\"0.508\" y2=\"2.54\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"2.54\" x2=\"0.508\" y2=\"1.524\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.778\" y1=\"-1.524\" x2=\"2.54\" y2=\"-2.54\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-2.54\" x2=\"1.27\" y2=\"-2.54\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"-2.54\" x2=\"1.778\" y2=\"-1.524\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.54\" y1=\"-2.04\" x2=\"0.308\" y2=\"-1.424\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.524\" y1=\"-2.413\" x2=\"2.286\" y2=\"-2.413\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"2.286\" y1=\"-2.413\" x2=\"1.778\" y2=\"-1.778\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.778\" y1=\"-1.778\" x2=\"1.524\" y2=\"-2.286\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.524\" y1=\"-2.286\" x2=\"1.905\" y2=\"-2.286\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.905\" y1=\"-2.286\" x2=\"1.778\" y2=\"-2.032\" width=\"0.254\" layer=\"94\"/>\n<pin name=\"B\" x=\"-2.54\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"1\"/>\n<pin name=\"C\" x=\"2.54\" y=\"5.08\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"2\" rot=\"R270\"/>\n<pin name=\"E\" x=\"2.54\" y=\"-5.08\" visible=\"off\" length=\"short\" direction=\"pas\" swaplevel=\"3\" rot=\"R90\"/>\n<text x=\"2.54\" y=\"1.27\" size=\"1.778\" layer=\"95\" font=\"vector\" align=\"center-left\">&gt;NAME</text>\n<text x=\"2.54\" y=\"-1.27\" size=\"1.778\" layer=\"96\" font=\"vector\" align=\"center-left\">&gt;VALUE</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"MBT3904DW1T1\" prefix=\"Q\" uservalue=\"yes\">\n<description>&lt;h3&gt;MBT3904DW1 Dual NPN Transistors&lt;/h3&gt;\n&lt;p&gt;The MBT3904W1 puts two general purpose 3904 NPN transistors in a single package.&lt;/p&gt;\n&lt;p&gt;&lt;a href=\"http://www.onsemi.com/pub_link/Collateral/MBT3904DW1T1-D.PDF\"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;</description>\n<gates>\n<gate name=\"Q1\" symbol=\"NPN\" x=\"0\" y=\"7.62\"/>\n<gate name=\"Q2\" symbol=\"NPN\" x=\"0\" y=\"-7.62\" swaplevel=\"1\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"SC70-6\">\n<connects>\n<connect gate=\"Q1\" pin=\"B\" pad=\"5\"/>\n<connect gate=\"Q1\" pin=\"C\" pad=\"3\"/>\n<connect gate=\"Q1\" pin=\"E\" pad=\"4\"/>\n<connect gate=\"Q2\" pin=\"B\" pad=\"2\"/>\n<connect gate=\"Q2\" pin=\"C\" pad=\"6\"/>\n<connect gate=\"Q2\" pin=\"E\" pad=\"1\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"TRANS-13337\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-Aesthetics\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n</packages>\n<symbols>\n<symbol name=\"DGND\">\n<wire x1=\"-1.905\" y1=\"0\" x2=\"1.905\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"-2.54\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"GND\" x=\"0\" y=\"2.54\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R270\"/>\n</symbol>\n<symbol name=\"V_USB\">\n<wire x1=\"0.762\" y1=\"1.27\" x2=\"0\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"-0.762\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-1.016\" y=\"3.556\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"V_USB\" x=\"0\" y=\"0\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R90\"/>\n</symbol>\n<symbol name=\"V_BATT\">\n<wire x1=\"0.762\" y1=\"1.27\" x2=\"0\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"-0.762\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-1.016\" y=\"3.556\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"V_BATT\" x=\"0\" y=\"0\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R90\"/>\n</symbol>\n<symbol name=\"3.3V\">\n<wire x1=\"0.762\" y1=\"1.27\" x2=\"0\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"-0.762\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-1.016\" y=\"3.556\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"3.3V\" x=\"0\" y=\"0\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R90\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"GND\" prefix=\"GND\">\n<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>\n<gates>\n<gate name=\"1\" symbol=\"DGND\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"V_USB\" prefix=\"SUPPLY\">\n<gates>\n<gate name=\"G$1\" symbol=\"V_USB\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"V_BATT\" prefix=\"SUPPLY\">\n<description>&lt;b&gt;V_BATT&lt;/b&gt;&lt;br&gt;\nGeneric symbol for the battery input to a system.</description>\n<gates>\n<gate name=\"G$1\" symbol=\"V_BATT\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"3.3V\" prefix=\"SUPPLY\">\n<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"3.3V\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-Connectors\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"1X02\">\n<wire x1=\"-0.635\" y1=\"1.27\" x2=\"0.635\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.635\" y1=\"1.27\" x2=\"1.27\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.27\" y1=\"-0.635\" x2=\"0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.27\" y1=\"0.635\" x2=\"1.905\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.905\" y1=\"1.27\" x2=\"3.175\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.175\" y1=\"1.27\" x2=\"3.81\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-0.635\" x2=\"3.175\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.175\" y1=\"-1.27\" x2=\"1.905\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.905\" y1=\"-1.27\" x2=\"1.27\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0.635\" x2=\"-1.27\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.635\" y1=\"1.27\" x2=\"-1.27\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"-0.635\" x2=\"-0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.635\" y1=\"-1.27\" x2=\"-0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0.635\" x2=\"3.81\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<text x=\"-1.3462\" y=\"1.8288\" size=\"1.27\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"-3.175\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n<rectangle x1=\"2.286\" y1=\"-0.254\" x2=\"2.794\" y2=\"0.254\" layer=\"51\"/>\n<rectangle x1=\"-0.254\" y1=\"-0.254\" x2=\"0.254\" y2=\"0.254\" layer=\"51\"/>\n</package>\n<package name=\"MOLEX-1X2\">\n<wire x1=\"-1.27\" y1=\"3.048\" x2=\"-1.27\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"3.048\" x2=\"3.81\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"3.048\" x2=\"-1.27\" y2=\"3.048\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-2.54\" x2=\"2.54\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-2.54\" x2=\"0\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-2.54\" x2=\"-1.27\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-2.54\" x2=\"0\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-1.27\" x2=\"2.54\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-1.27\" x2=\"2.54\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" shape=\"square\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\"/>\n</package>\n<package name=\"SCREWTERMINAL-3.5MM-2\">\n<circle x=\"2\" y=\"3\" radius=\"0.2828\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.75\" y1=\"3.4\" x2=\"5.25\" y2=\"3.4\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"3.4\" x2=\"5.25\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"5.25\" y2=\"-3.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-3.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-2.8\" x2=\"-1.75\" y2=\"3.4\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-1.35\" x2=\"-2.25\" y2=\"-1.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.25\" y1=\"-1.35\" x2=\"-2.25\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.25\" y1=\"-2.35\" x2=\"-1.75\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"3.15\" x2=\"5.75\" y2=\"3.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.75\" y1=\"3.15\" x2=\"5.75\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.75\" y1=\"2.15\" x2=\"5.25\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.2\" diameter=\"2.032\" shape=\"square\"/>\n<pad name=\"2\" x=\"3.5\" y=\"0\" drill=\"1.2\" diameter=\"2.032\"/>\n<text x=\"-1.27\" y=\"2.54\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"JST-2-SMD\">\n<description>2mm SMD side-entry connector. tDocu layer indicates the actual physical plastic housing. +/- indicate SparkFun standard batteries and wiring.</description>\n<wire x1=\"-4\" y1=\"-1\" x2=\"-4\" y2=\"-4.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4\" y1=\"-4.5\" x2=\"-3.2\" y2=\"-4.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.2\" y1=\"-4.5\" x2=\"-3.2\" y2=\"-2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.2\" y1=\"-2\" x2=\"-2\" y2=\"-2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2\" y1=\"-2\" x2=\"3.2\" y2=\"-2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2\" y1=\"-2\" x2=\"3.2\" y2=\"-4.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2\" y1=\"-4.5\" x2=\"4\" y2=\"-4.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4\" y1=\"-4.5\" x2=\"4\" y2=\"-1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2\" y1=\"3\" x2=\"-2\" y2=\"3\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-1\" y=\"-3.7\" dx=\"1\" dy=\"4.6\" layer=\"1\"/>\n<smd name=\"2\" x=\"1\" y=\"-3.7\" dx=\"1\" dy=\"4.6\" layer=\"1\"/>\n<smd name=\"NC1\" x=\"-3.4\" y=\"1.5\" dx=\"3.4\" dy=\"1.6\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"NC2\" x=\"3.4\" y=\"1.5\" dx=\"3.4\" dy=\"1.6\" layer=\"1\" rot=\"R90\"/>\n<text x=\"-1.27\" y=\"1.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"0\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"1X02_BIG\">\n<wire x1=\"-1.27\" y1=\"1.27\" x2=\"-1.27\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"-1.27\" x2=\"5.08\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"-1.27\" x2=\"5.08\" y2=\"1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"1.27\" x2=\"-1.27\" y2=\"1.27\" width=\"0.127\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"0\" y=\"0\" drill=\"1.0668\"/>\n<pad name=\"P$2\" x=\"3.81\" y=\"0\" drill=\"1.0668\"/>\n</package>\n<package name=\"JST-2-SMD-VERT\">\n<wire x1=\"-4.1\" y1=\"2.97\" x2=\"4.2\" y2=\"2.97\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"4.2\" y1=\"2.97\" x2=\"4.2\" y2=\"-2.13\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"4.2\" y1=\"-2.13\" x2=\"-4.1\" y2=\"-2.13\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-4.1\" y1=\"-2.13\" x2=\"-4.1\" y2=\"2.97\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-4.1\" y1=\"3\" x2=\"4.2\" y2=\"3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4.2\" y1=\"3\" x2=\"4.2\" y2=\"2.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.1\" y1=\"3\" x2=\"-4.1\" y2=\"2.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2\" y1=\"-2.1\" x2=\"4.2\" y2=\"-2.1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4.2\" y1=\"-2.1\" x2=\"4.2\" y2=\"-1.7\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2\" y1=\"-2.1\" x2=\"-4.1\" y2=\"-2.1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.1\" y1=\"-2.1\" x2=\"-4.1\" y2=\"-1.8\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"P$1\" x=\"-3.4\" y=\"0.27\" dx=\"3\" dy=\"1.6\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"P$2\" x=\"3.4\" y=\"0.27\" dx=\"3\" dy=\"1.6\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"VCC\" x=\"-1\" y=\"-2\" dx=\"1\" dy=\"5.5\" layer=\"1\"/>\n<smd name=\"GND\" x=\"1\" y=\"-2\" dx=\"1\" dy=\"5.5\" layer=\"1\"/>\n<text x=\"2.54\" y=\"-5.08\" size=\"1.27\" layer=\"25\">&gt;Name</text>\n<text x=\"2.24\" y=\"3.48\" size=\"1.27\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"R_SW_TH\">\n<wire x1=\"-1.651\" y1=\"19.2532\" x2=\"-1.651\" y2=\"-1.3716\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.651\" y1=\"-1.3716\" x2=\"-1.651\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.651\" y1=\"19.2532\" x2=\"13.589\" y2=\"19.2532\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"13.589\" y1=\"19.2532\" x2=\"13.589\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"13.589\" y1=\"-2.2352\" x2=\"-1.651\" y2=\"-2.2352\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"0\" y=\"0\" drill=\"1.6002\"/>\n<pad name=\"P$2\" x=\"0\" y=\"16.9926\" drill=\"1.6002\"/>\n<pad name=\"P$3\" x=\"12.0904\" y=\"15.494\" drill=\"1.6002\"/>\n<pad name=\"P$4\" x=\"12.0904\" y=\"8.4582\" drill=\"1.6002\"/>\n</package>\n<package name=\"SCREWTERMINAL-5MM-2\">\n<wire x1=\"-3.1\" y1=\"4.2\" x2=\"8.1\" y2=\"4.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.1\" y1=\"4.2\" x2=\"8.1\" y2=\"-2.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.1\" y1=\"-2.3\" x2=\"8.1\" y2=\"-3.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.1\" y1=\"-3.3\" x2=\"-3.1\" y2=\"-3.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.1\" y1=\"-3.3\" x2=\"-3.1\" y2=\"-2.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.1\" y1=\"-2.3\" x2=\"-3.1\" y2=\"4.2\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"8.1\" y1=\"-2.3\" x2=\"-3.1\" y2=\"-2.3\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.1\" y1=\"-1.35\" x2=\"-3.7\" y2=\"-1.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.7\" y1=\"-1.35\" x2=\"-3.7\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3.7\" y1=\"-2.35\" x2=\"-3.1\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"8.1\" y1=\"4\" x2=\"8.7\" y2=\"4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"8.7\" y1=\"4\" x2=\"8.7\" y2=\"3\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"8.7\" y1=\"3\" x2=\"8.1\" y2=\"3\" width=\"0.2032\" layer=\"51\"/>\n<circle x=\"2.5\" y=\"3.7\" radius=\"0.2828\" width=\"0.127\" layer=\"51\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.3\" diameter=\"2.032\" shape=\"square\"/>\n<pad name=\"2\" x=\"5\" y=\"0\" drill=\"1.3\" diameter=\"2.032\"/>\n<text x=\"-1.27\" y=\"2.54\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"1X02_LOCK\">\n<wire x1=\"-0.635\" y1=\"1.27\" x2=\"0.635\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.635\" y1=\"1.27\" x2=\"1.27\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.27\" y1=\"-0.635\" x2=\"0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.27\" y1=\"0.635\" x2=\"1.905\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.905\" y1=\"1.27\" x2=\"3.175\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.175\" y1=\"1.27\" x2=\"3.81\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-0.635\" x2=\"3.175\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.175\" y1=\"-1.27\" x2=\"1.905\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.905\" y1=\"-1.27\" x2=\"1.27\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0.635\" x2=\"-1.27\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.635\" y1=\"1.27\" x2=\"-1.27\" y2=\"0.635\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"-0.635\" x2=\"-0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.635\" y1=\"-1.27\" x2=\"-0.635\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0.635\" x2=\"3.81\" y2=\"-0.635\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"-0.1778\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.7178\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<text x=\"-1.3462\" y=\"1.8288\" size=\"1.27\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"-3.175\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n<rectangle x1=\"-0.2921\" y1=\"-0.2921\" x2=\"0.2921\" y2=\"0.2921\" layer=\"51\"/>\n<rectangle x1=\"2.2479\" y1=\"-0.2921\" x2=\"2.8321\" y2=\"0.2921\" layer=\"51\"/>\n</package>\n<package name=\"MOLEX-1X2_LOCK\">\n<wire x1=\"-1.27\" y1=\"3.048\" x2=\"-1.27\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"3.048\" x2=\"3.81\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"3.048\" x2=\"-1.27\" y2=\"3.048\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-2.54\" x2=\"2.54\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-2.54\" x2=\"0\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-2.54\" x2=\"-1.27\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-2.54\" x2=\"0\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"-1.27\" x2=\"2.54\" y2=\"-1.27\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"2.54\" y1=\"-1.27\" x2=\"2.54\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<pad name=\"1\" x=\"-0.127\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" shape=\"square\"/>\n<pad name=\"2\" x=\"2.667\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\"/>\n<rectangle x1=\"-0.2921\" y1=\"-0.2921\" x2=\"0.2921\" y2=\"0.2921\" layer=\"51\"/>\n<rectangle x1=\"2.2479\" y1=\"-0.2921\" x2=\"2.8321\" y2=\"0.2921\" layer=\"51\"/>\n</package>\n<package name=\"1X02_LOCK_LONGPADS\">\n<description>This footprint was designed to help hold the alignment of a through-hole component (i.e.  6-pin header) while soldering it into place.  \nYou may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).  \nThis slight alteration caused the pins (the squares in the middle) to touch the edges of the holes.  Because they are alternating, it causes a \"brace\" \nto hold the component in place.  0.005 has proven to be the perfect amount of \"off-center\" position when using our standard breakaway headers.\nAlthough looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice.  Also,\nif you push a header all the way into place, it is covered up entirely on the bottom side.  This idea of altering the position of holes to aid alignment \nwill be further integrated into the Sparkfun Library for other footprints.  It can help hold any component with 3 or more connection pins.</description>\n<wire x1=\"1.651\" y1=\"0\" x2=\"0.889\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0\" x2=\"-1.016\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0\" x2=\"-1.27\" y2=\"0.9906\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0.9906\" x2=\"-0.9906\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"0\" x2=\"-1.27\" y2=\"-0.9906\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.27\" y1=\"-0.9906\" x2=\"-0.9906\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0\" x2=\"3.556\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0\" x2=\"3.81\" y2=\"-0.9906\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-0.9906\" x2=\"3.5306\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0\" x2=\"3.81\" y2=\"0.9906\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"0.9906\" x2=\"3.5306\" y2=\"1.27\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"-0.127\" y=\"0\" drill=\"1.016\" shape=\"long\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.667\" y=\"0\" drill=\"1.016\" shape=\"long\" rot=\"R90\"/>\n<text x=\"-1.27\" y=\"1.778\" size=\"1.27\" layer=\"25\" font=\"vector\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"-3.302\" size=\"1.27\" layer=\"27\" font=\"vector\">&gt;VALUE</text>\n<rectangle x1=\"-0.2921\" y1=\"-0.2921\" x2=\"0.2921\" y2=\"0.2921\" layer=\"51\"/>\n<rectangle x1=\"2.2479\" y1=\"-0.2921\" x2=\"2.8321\" y2=\"0.2921\" layer=\"51\"/>\n</package>\n<package name=\"SCREWTERMINAL-3.5MM-2_LOCK\">\n<wire x1=\"-1.75\" y1=\"3.4\" x2=\"5.25\" y2=\"3.4\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"3.4\" x2=\"5.25\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"5.25\" y2=\"-3.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-3.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-2.8\" x2=\"-1.75\" y2=\"3.4\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.75\" y1=\"-1.35\" x2=\"-2.15\" y2=\"-1.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.15\" y1=\"-1.35\" x2=\"-2.15\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.15\" y1=\"-2.35\" x2=\"-1.75\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"3.15\" x2=\"5.65\" y2=\"3.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.65\" y1=\"3.15\" x2=\"5.65\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.65\" y1=\"2.15\" x2=\"5.25\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<circle x=\"2\" y=\"3\" radius=\"0.2828\" width=\"0.127\" layer=\"51\"/>\n<circle x=\"0\" y=\"0\" radius=\"0.4318\" width=\"0.0254\" layer=\"51\"/>\n<circle x=\"3.5\" y=\"0\" radius=\"0.4318\" width=\"0.0254\" layer=\"51\"/>\n<pad name=\"1\" x=\"-0.1778\" y=\"0\" drill=\"1.2\" diameter=\"2.032\" shape=\"square\"/>\n<pad name=\"2\" x=\"3.6778\" y=\"0\" drill=\"1.2\" diameter=\"2.032\"/>\n<text x=\"-1.27\" y=\"2.54\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"1X02_LONGPADS\">\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.1176\" diameter=\"1.8796\" shape=\"long\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"1.1176\" diameter=\"1.8796\" shape=\"long\" rot=\"R90\"/>\n</package>\n<package name=\"1X02_NO_SILK\">\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"1.016\" diameter=\"1.8796\" rot=\"R90\"/>\n<text x=\"-1.3462\" y=\"1.8288\" size=\"1.27\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"-3.175\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n<rectangle x1=\"2.286\" y1=\"-0.254\" x2=\"2.794\" y2=\"0.254\" layer=\"51\"/>\n<rectangle x1=\"-0.254\" y1=\"-0.254\" x2=\"0.254\" y2=\"0.254\" layer=\"51\"/>\n</package>\n<package name=\"JST-2-PTH\">\n<pad name=\"1\" x=\"-1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<pad name=\"2\" x=\"1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<text x=\"-1.27\" y=\"5.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"4\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<text x=\"0.6\" y=\"0.7\" size=\"1.27\" layer=\"51\">+</text>\n<text x=\"-1.4\" y=\"0.7\" size=\"1.27\" layer=\"51\">-</text>\n<wire x1=\"-2.95\" y1=\"-1.6\" x2=\"-2.95\" y2=\"6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.95\" y1=\"6\" x2=\"2.95\" y2=\"6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"6\" x2=\"2.95\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.95\" y1=\"-1.6\" x2=\"-2.3\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"-1.6\" x2=\"2.3\" y2=\"-1.6\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.3\" y1=\"-1.6\" x2=\"-2.3\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.3\" y1=\"-1.6\" x2=\"2.3\" y2=\"0\" width=\"0.2032\" layer=\"21\"/>\n</package>\n<package name=\"1X02_XTRA_BIG\">\n<wire x1=\"-5.08\" y1=\"2.54\" x2=\"-5.08\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.08\" y1=\"-2.54\" x2=\"5.08\" y2=\"-2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"-2.54\" x2=\"5.08\" y2=\"2.54\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"2.54\" x2=\"-5.08\" y2=\"2.54\" width=\"0.127\" layer=\"21\"/>\n<pad name=\"1\" x=\"-2.54\" y=\"0\" drill=\"2.0574\" diameter=\"3.556\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"2.0574\" diameter=\"3.556\"/>\n</package>\n<package name=\"1X02_PP_HOLES_ONLY\">\n<circle x=\"0\" y=\"0\" radius=\"0.635\" width=\"0.127\" layer=\"51\"/>\n<circle x=\"2.54\" y=\"0\" radius=\"0.635\" width=\"0.127\" layer=\"51\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"0.889\" diameter=\"0.8128\" rot=\"R90\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"0.889\" diameter=\"0.8128\" rot=\"R90\"/>\n<hole x=\"0\" y=\"0\" drill=\"1.4732\"/>\n<hole x=\"2.54\" y=\"0\" drill=\"1.4732\"/>\n</package>\n<package name=\"SCREWTERMINAL-3.5MM-2-NS\">\n<wire x1=\"-1.75\" y1=\"3.4\" x2=\"5.25\" y2=\"3.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"3.4\" x2=\"5.25\" y2=\"-2.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"5.25\" y2=\"-3.6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-3.6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.75\" y1=\"-3.6\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.75\" y1=\"-2.8\" x2=\"-1.75\" y2=\"3.4\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"-2.8\" x2=\"-1.75\" y2=\"-2.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-1.75\" y1=\"-1.35\" x2=\"-2.15\" y2=\"-1.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.15\" y1=\"-1.35\" x2=\"-2.15\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2.15\" y1=\"-2.35\" x2=\"-1.75\" y2=\"-2.35\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.25\" y1=\"3.15\" x2=\"5.65\" y2=\"3.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.65\" y1=\"3.15\" x2=\"5.65\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"5.65\" y1=\"2.15\" x2=\"5.25\" y2=\"2.15\" width=\"0.2032\" layer=\"51\"/>\n<circle x=\"2\" y=\"3\" radius=\"0.2828\" width=\"0.127\" layer=\"51\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.2\" diameter=\"2.032\" shape=\"square\"/>\n<pad name=\"2\" x=\"3.5\" y=\"0\" drill=\"1.2\" diameter=\"2.032\"/>\n<text x=\"-1.27\" y=\"2.54\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"JST-2-PTH-NS\">\n<wire x1=\"-2\" y1=\"0\" x2=\"-2\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2\" y1=\"-1.8\" x2=\"-3\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3\" y1=\"-1.8\" x2=\"-3\" y2=\"6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3\" y1=\"6\" x2=\"3\" y2=\"6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3\" y1=\"6\" x2=\"3\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3\" y1=\"-1.8\" x2=\"2\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"-1.8\" x2=\"2\" y2=\"0\" width=\"0.2032\" layer=\"51\"/>\n<pad name=\"1\" x=\"-1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<pad name=\"2\" x=\"1\" y=\"0\" drill=\"0.7\" diameter=\"1.6\"/>\n<text x=\"-1.27\" y=\"5.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"4\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<text x=\"0.6\" y=\"0.7\" size=\"1.27\" layer=\"51\">+</text>\n<text x=\"-1.4\" y=\"0.7\" size=\"1.27\" layer=\"51\">-</text>\n</package>\n<package name=\"JST-2-PTH-KIT\">\n<description>&lt;H3&gt;JST-2-PTH-KIT&lt;/h3&gt;\n2-Pin JST, through-hole connector&lt;br&gt;\n&lt;br&gt;\n&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>\n<wire x1=\"-2\" y1=\"0\" x2=\"-2\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-2\" y1=\"-1.8\" x2=\"-3\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3\" y1=\"-1.8\" x2=\"-3\" y2=\"6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"-3\" y1=\"6\" x2=\"3\" y2=\"6\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3\" y1=\"6\" x2=\"3\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"3\" y1=\"-1.8\" x2=\"2\" y2=\"-1.8\" width=\"0.2032\" layer=\"51\"/>\n<wire x1=\"2\" y1=\"-1.8\" x2=\"2\" y2=\"0\" width=\"0.2032\" layer=\"51\"/>\n<pad name=\"1\" x=\"-1\" y=\"0\" drill=\"0.7\" diameter=\"1.4478\" stop=\"no\"/>\n<pad name=\"2\" x=\"1\" y=\"0\" drill=\"0.7\" diameter=\"1.4478\" stop=\"no\"/>\n<text x=\"-1.27\" y=\"5.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.27\" y=\"4\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<text x=\"0.6\" y=\"0.7\" size=\"1.27\" layer=\"51\">+</text>\n<text x=\"-1.4\" y=\"0.7\" size=\"1.27\" layer=\"51\">-</text>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"-0.9975\" y=\"-0.6604\" curve=\"-90.025935\"/>\n<vertex x=\"-1.6604\" y=\"0\" curve=\"-90.017354\"/>\n<vertex x=\"-1\" y=\"0.6604\" curve=\"-90\"/>\n<vertex x=\"-0.3396\" y=\"0\" curve=\"-90.078137\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"-1\" y=\"-0.2865\" curve=\"-90.08005\"/>\n<vertex x=\"-1.2865\" y=\"0\" curve=\"-90.040011\"/>\n<vertex x=\"-1\" y=\"0.2865\" curve=\"-90\"/>\n<vertex x=\"-0.7135\" y=\"0\" curve=\"-90\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"30\">\n<vertex x=\"1.0025\" y=\"-0.6604\" curve=\"-90.025935\"/>\n<vertex x=\"0.3396\" y=\"0\" curve=\"-90.017354\"/>\n<vertex x=\"1\" y=\"0.6604\" curve=\"-90\"/>\n<vertex x=\"1.6604\" y=\"0\" curve=\"-90.078137\"/>\n</polygon>\n<polygon width=\"0.127\" layer=\"29\">\n<vertex x=\"1\" y=\"-0.2865\" curve=\"-90.08005\"/>\n<vertex x=\"0.7135\" y=\"0\" curve=\"-90.040011\"/>\n<vertex x=\"1\" y=\"0.2865\" curve=\"-90\"/>\n<vertex x=\"1.2865\" y=\"0\" curve=\"-90\"/>\n</polygon>\n</package>\n<package name=\"SPRINGTERMINAL-2.54MM-2\">\n<wire x1=\"-4.2\" y1=\"7.88\" x2=\"-4.2\" y2=\"-2.8\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"-4.2\" y1=\"-2.8\" x2=\"-4.2\" y2=\"-4.72\" width=\"0.254\" layer=\"51\"/>\n<wire x1=\"-4.2\" y1=\"-4.72\" x2=\"3.44\" y2=\"-4.72\" width=\"0.254\" layer=\"51\"/>\n<wire x1=\"3.44\" y1=\"-4.72\" x2=\"3.44\" y2=\"-2.8\" width=\"0.254\" layer=\"51\"/>\n<wire x1=\"3.44\" y1=\"7.88\" x2=\"-4.2\" y2=\"7.88\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"5.08\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"5.08\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.54\" y2=\"5.08\" width=\"0.254\" layer=\"16\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"2.54\" y2=\"5.08\" width=\"0.254\" layer=\"1\"/>\n<wire x1=\"-4.2\" y1=\"-2.8\" x2=\"3.44\" y2=\"-2.8\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"3.44\" y1=\"4\" x2=\"3.44\" y2=\"1\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"3.44\" y1=\"7.88\" x2=\"3.44\" y2=\"6\" width=\"0.254\" layer=\"21\"/>\n<wire x1=\"3.44\" y1=\"-0.9\" x2=\"3.44\" y2=\"-2.8\" width=\"0.254\" layer=\"21\"/>\n<pad name=\"1\" x=\"0\" y=\"0\" drill=\"1.1\" diameter=\"1.9\"/>\n<pad name=\"P$2\" x=\"0\" y=\"5.08\" drill=\"1.1\" diameter=\"1.9\"/>\n<pad name=\"P$3\" x=\"2.54\" y=\"5.08\" drill=\"1.1\" diameter=\"1.9\"/>\n<pad name=\"2\" x=\"2.54\" y=\"0\" drill=\"1.1\" diameter=\"1.9\"/>\n</package>\n<package name=\"1X02_2.54_SCREWTERM\">\n<pad name=\"P2\" x=\"0\" y=\"0\" drill=\"1.016\" shape=\"square\"/>\n<pad name=\"P1\" x=\"2.54\" y=\"0\" drill=\"1.016\" shape=\"square\"/>\n<wire x1=\"-1.5\" y1=\"3.25\" x2=\"4\" y2=\"3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4\" y1=\"3.25\" x2=\"4\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4\" y1=\"2.5\" x2=\"4\" y2=\"-3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4\" y1=\"-3.25\" x2=\"-1.5\" y2=\"-3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.5\" y1=\"-3.25\" x2=\"-1.5\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.5\" y1=\"2.5\" x2=\"-1.5\" y2=\"3.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.5\" y1=\"2.5\" x2=\"4\" y2=\"2.5\" width=\"0.2032\" layer=\"21\"/>\n</package>\n<package name=\"JST-2-PTH-VERT\">\n<wire x1=\"-2.95\" y1=\"-2.25\" x2=\"-2.95\" y2=\"2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.95\" y1=\"2.25\" x2=\"2.95\" y2=\"2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"2.25\" x2=\"2.95\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.95\" y1=\"-2.25\" x2=\"1\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-2.25\" x2=\"-2.95\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-1.75\" x2=\"1\" y2=\"-1.75\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"-1.75\" x2=\"1\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-1.75\" x2=\"-1\" y2=\"-2.25\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"1\" x=\"-1\" y=\"-0.55\" drill=\"0.7\" diameter=\"1.6\"/>\n<pad name=\"2\" x=\"1\" y=\"-0.55\" drill=\"0.7\" diameter=\"1.6\"/>\n<text x=\"-1.984\" y=\"3\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"2.016\" y=\"3\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n<text x=\"0.616\" y=\"0.75\" size=\"1.27\" layer=\"51\">+</text>\n<text x=\"-1.384\" y=\"0.75\" size=\"1.27\" layer=\"51\">-</text>\n</package>\n<package name=\"MICRO-B-RA-SMT\">\n<description>Package for an SMT Micro-B connector.  Digikey part #H11613-ND\n*** Unproven***</description>\n<wire x1=\"-3.4\" y1=\"-3\" x2=\"3.4\" y2=\"-3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.4\" y1=\"-3\" x2=\"-3.4\" y2=\"3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.4\" y1=\"3\" x2=\"-3.4\" y2=\"3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.4\" y1=\"3\" x2=\"3.4\" y2=\"-3\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"5\" x=\"-1.3\" y=\"-1.95\" dx=\"1.1\" dy=\"0.35\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"1\" x=\"1.3\" y=\"-1.95\" dx=\"1.1\" dy=\"0.35\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"4\" x=\"-0.65\" y=\"-1.75\" dx=\"1.5\" dy=\"0.35\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"3\" x=\"0\" y=\"-1.75\" dx=\"1.5\" dy=\"0.35\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"2\" x=\"0.65\" y=\"-1.75\" dx=\"1.5\" dy=\"0.35\" layer=\"1\" rot=\"R90\"/>\n<text x=\"-3.6\" y=\"-1.8\" size=\"0.762\" layer=\"25\" rot=\"R90\">&gt;NAME</text>\n<text x=\"4.3\" y=\"-1.8\" size=\"0.762\" layer=\"27\" rot=\"R90\">&gt;VALUE</text>\n</package>\n<package name=\"MICRO-B-RA-TH\">\n<description>&lt;h3&gt;Micro B Right Angle through-hole PCB plug connector&lt;/h3&gt;\n&lt;b&gt;**Unproven**&lt;/b&gt;&lt;br&gt;\nSee digikey part #H11673TR-ND</description>\n<wire x1=\"-1.525\" y1=\"0\" x2=\"-1.525\" y2=\"1.55\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.525\" y1=\"0\" x2=\"1.525\" y2=\"1.55\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.525\" y1=\"1.55\" x2=\"1.525\" y2=\"1.55\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.525\" y1=\"0\" x2=\"-3.65\" y2=\"0\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.525\" y1=\"0\" x2=\"3.65\" y2=\"0\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.65\" y1=\"0\" x2=\"-3.65\" y2=\"-0.95\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.65\" y1=\"0\" x2=\"3.65\" y2=\"-0.95\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-2.5\" y1=\"-3.35\" x2=\"2.5\" y2=\"-3.35\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-3.65\" y1=\"-0.95\" x2=\"-2.5\" y2=\"-3.35\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"3.65\" y1=\"-0.95\" x2=\"2.5\" y2=\"-3.35\" width=\"0.127\" layer=\"51\"/>\n<pad name=\"3\" x=\"0\" y=\"-1.25\" drill=\"0.508\" diameter=\"0.9\"/>\n<pad name=\"4\" x=\"0.65\" y=\"0.6\" drill=\"0.508\" diameter=\"0.9\"/>\n<pad name=\"2\" x=\"-0.65\" y=\"0.6\" drill=\"0.508\" diameter=\"0.9\"/>\n<pad name=\"5\" x=\"1.3\" y=\"-0.95\" drill=\"0.508\" diameter=\"0.9\"/>\n<pad name=\"1\" x=\"-1.3\" y=\"-0.95\" drill=\"0.508\" diameter=\"0.9\"/>\n<text x=\"-1.651\" y=\"0.635\" size=\"0.381\" layer=\"25\" rot=\"R180\">&gt;Name</text>\n<text x=\"1.651\" y=\"0.254\" size=\"0.381\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"MICRO-B-TH\">\n<description>&lt;h3&gt;Micro B USB Plug Assembly - Straight Through-hole&lt;/h3&gt;\n&lt;b&gt;**UNPROVEN**&lt;/b&gt;&lt;Br&gt;\nSee Digikey part #H11497-ND</description>\n<wire x1=\"-5.125\" y1=\"-2.1\" x2=\"5.125\" y2=\"-2.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-5.125\" y1=\"2.1\" x2=\"5.125\" y2=\"2.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-5.125\" y1=\"-2.1\" x2=\"-5.125\" y2=\"2.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"5.125\" y1=\"-2.1\" x2=\"5.125\" y2=\"2.1\" width=\"0.127\" layer=\"51\"/>\n<pad name=\"1\" x=\"-1.3\" y=\"-0.775\" drill=\"0.6\" diameter=\"1\"/>\n<pad name=\"3\" x=\"0\" y=\"-0.775\" drill=\"0.6\" diameter=\"1\"/>\n<pad name=\"5\" x=\"1.3\" y=\"-0.775\" drill=\"0.6\" diameter=\"1\"/>\n<pad name=\"4\" x=\"0.65\" y=\"0.775\" drill=\"0.6\" diameter=\"1\"/>\n<pad name=\"2\" x=\"-0.65\" y=\"0.775\" drill=\"0.6\" diameter=\"1\"/>\n<pad name=\"P$1\" x=\"-4.1\" y=\"0\" drill=\"1.2\" rot=\"R90\"/>\n<pad name=\"P$2\" x=\"4.1\" y=\"0\" drill=\"1.2\" rot=\"R90\"/>\n<text x=\"-5.08\" y=\"2.286\" size=\"0.381\" layer=\"25\">&gt;Name</text>\n<text x=\"-5.08\" y=\"-2.667\" size=\"0.381\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"MICRO-B-SMT\">\n<description>&lt;h3&gt;USB Micro-B Plug Connector&lt;/h3&gt;\nManufacturer part #: ZX80-B-5SA&lt;br&gt;\nManufacturer: Hirose&lt;br&gt;&lt;br&gt;\n&lt;b&gt;***Unproven***&lt;/b&gt; (Passed 1:1 printout test though!)</description>\n<wire x1=\"-9.7\" y1=\"3.77\" x2=\"-8.275\" y2=\"3.77\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-9.7\" y1=\"0.57\" x2=\"-8.275\" y2=\"0.57\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-9.7\" y1=\"3.77\" x2=\"-10.275\" y2=\"4.3\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-10.275\" y1=\"4.3\" x2=\"-10.275\" y2=\"5.38\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-9.7\" y1=\"0.57\" x2=\"-10.275\" y2=\"0\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-10.275\" y1=\"0\" x2=\"-10.275\" y2=\"-0.9\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-8.275\" y1=\"3.77\" x2=\"-8.275\" y2=\"0.57\" width=\"0.127\" layer=\"51\" curve=\"-180\"/>\n<wire x1=\"9.7\" y1=\"0.57\" x2=\"8.275\" y2=\"0.57\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"8.275\" y1=\"0.57\" x2=\"8.275\" y2=\"3.77\" width=\"0.127\" layer=\"51\" curve=\"-180\"/>\n<wire x1=\"9.7\" y1=\"3.77\" x2=\"8.275\" y2=\"3.77\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"9.7\" y1=\"0.57\" x2=\"10.275\" y2=\"0\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"10.275\" y1=\"0\" x2=\"10.275\" y2=\"-0.9\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"9.7\" y1=\"3.77\" x2=\"10.275\" y2=\"4.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"10.275\" y1=\"4.4\" x2=\"10.275\" y2=\"5.38\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-10.275\" y1=\"5.38\" x2=\"-4.275\" y2=\"5.38\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"10.275\" y1=\"5.38\" x2=\"4.275\" y2=\"5.38\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-10.275\" y1=\"-0.9\" x2=\"-4.275\" y2=\"-0.9\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"10.275\" y1=\"-0.9\" x2=\"4.275\" y2=\"-0.9\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-4.275\" y1=\"-0.9\" x2=\"-4.275\" y2=\"0\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"4.275\" y1=\"-0.9\" x2=\"4.275\" y2=\"0\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-4.275\" y1=\"0\" x2=\"4.275\" y2=\"0\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-4.275\" y1=\"5.38\" x2=\"-4.275\" y2=\"4.48\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"4.275\" y1=\"5.38\" x2=\"4.275\" y2=\"4.48\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-4.275\" y1=\"4.48\" x2=\"4.275\" y2=\"4.48\" width=\"0.127\" layer=\"51\"/>\n<pad name=\"P$6\" x=\"-3.12053125\" y=\"3.18301875\" drill=\"1.016\" diameter=\"2.2\" rot=\"R90\"/>\n<pad name=\"P$7\" x=\"-3.097921875\" y=\"-0.026921875\" drill=\"1.016\" diameter=\"2.2\" rot=\"R90\"/>\n<pad name=\"P$8\" x=\"3.1218\" y=\"3.160159375\" drill=\"1.016\" diameter=\"2.2\" rot=\"R90\"/>\n<pad name=\"P$9\" x=\"3.10783125\" y=\"-0.02565625\" drill=\"1.016\" diameter=\"2.2\" rot=\"R90\"/>\n<smd name=\"3\" x=\"0\" y=\"0\" dx=\"2.2\" dy=\"0.4\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"2\" x=\"-0.65\" y=\"0\" dx=\"2.2\" dy=\"0.4\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"1\" x=\"-1.3\" y=\"0\" dx=\"2.2\" dy=\"0.4\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"5\" x=\"1.3\" y=\"0\" dx=\"2.2\" dy=\"0.4\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"4\" x=\"0.65\" y=\"0\" dx=\"2.2\" dy=\"0.4\" layer=\"1\" rot=\"R90\"/>\n<text x=\"-10.29\" y=\"5.58\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"10.39\" y=\"5.988\" size=\"0.4064\" layer=\"27\" rot=\"R180\">&gt;Value</text>\n<hole x=\"-8.275\" y=\"2.17\" drill=\"3.3\"/>\n<hole x=\"8.275\" y=\"2.17\" drill=\"3.3\"/>\n</package>\n<package name=\"USB-B-MICRO-SMD_V03\">\n<text x=\"-4.66\" y=\"5.96\" size=\"0.3048\" layer=\"51\">PCB Front</text>\n<wire x1=\"-3\" y1=\"5.6\" x2=\"-2.3\" y2=\"5.3\" width=\"0.08\" layer=\"51\"/>\n<wire x1=\"-2.3\" y1=\"5.3\" x2=\"-2.4\" y2=\"5.5\" width=\"0.08\" layer=\"51\"/>\n<wire x1=\"-2.3\" y1=\"5.3\" x2=\"-2.5\" y2=\"5.2\" width=\"0.08\" layer=\"51\"/>\n<text x=\"-1.27\" y=\"5.969\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.27\" y=\"5.461\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<smd name=\"D+\" x=\"2.725\" y=\"0\" dx=\"0.4\" dy=\"1.45\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"D-\" x=\"2.725\" y=\"0.65\" dx=\"0.4\" dy=\"1.45\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"VBUS\" x=\"2.725\" y=\"1.3\" dx=\"0.4\" dy=\"1.45\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"ID\" x=\"2.725\" y=\"-0.65\" dx=\"0.4\" dy=\"1.45\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"GND\" x=\"2.725\" y=\"-1.3\" dx=\"0.4\" dy=\"1.45\" layer=\"1\" rot=\"R90\"/>\n<hole x=\"2.2\" y=\"1.9\" drill=\"0.85\"/>\n<hole x=\"2.2\" y=\"-1.9\" drill=\"0.85\"/>\n<rectangle x1=\"-0.75\" y1=\"2.784\" x2=\"0.75\" y2=\"4.584\" layer=\"31\"/>\n<rectangle x1=\"-0.35\" y1=\"-0.75\" x2=\"0.35\" y2=\"0.75\" layer=\"31\"/>\n<rectangle x1=\"-0.75\" y1=\"-4.584\" x2=\"0.75\" y2=\"-2.784\" layer=\"31\"/>\n<wire x1=\"-2.15\" y1=\"3.9\" x2=\"-2.15\" y2=\"-3.9\" width=\"0.127\" layer=\"49\"/>\n<wire x1=\"2.85\" y1=\"3.9\" x2=\"2.85\" y2=\"-3.9\" width=\"0.127\" layer=\"49\"/>\n<wire x1=\"2.85\" y1=\"3.9\" x2=\"-2.15\" y2=\"3.9\" width=\"0.127\" layer=\"49\"/>\n<wire x1=\"2.85\" y1=\"-3.9\" x2=\"-2.15\" y2=\"-3.9\" width=\"0.127\" layer=\"49\"/>\n<wire x1=\"2.981959375\" y1=\"3.99288125\" x2=\"2\" y2=\"3.99288125\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"2\" y1=\"3.99288125\" x2=\"2\" y2=\"4\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"3\" y1=\"4\" x2=\"3\" y2=\"3\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"2\" y1=\"-4\" x2=\"3\" y2=\"-4\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"3\" y1=\"-4\" x2=\"3\" y2=\"-3\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"4\" x2=\"-2\" y2=\"4\" width=\"0.3048\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-4\" x2=\"-2\" y2=\"-4\" width=\"0.3048\" layer=\"21\"/>\n<rectangle x1=\"-0.85\" y1=\"2.684\" x2=\"0.85\" y2=\"4.684\" layer=\"29\"/>\n<rectangle x1=\"-0.85\" y1=\"-4.684\" x2=\"0.85\" y2=\"-2.684\" layer=\"29\"/>\n<rectangle x1=\"-0.85\" y1=\"-1.35\" x2=\"0.85\" y2=\"1.35\" layer=\"29\"/>\n<smd name=\"SHIELD1\" x=\"0\" y=\"3.685\" dx=\"1.8\" dy=\"1.5\" layer=\"1\" rot=\"R90\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHIELD3\" x=\"0\" y=\"0\" dx=\"2.5\" dy=\"1.5\" layer=\"1\" rot=\"R90\" stop=\"no\" cream=\"no\"/>\n<smd name=\"SHIELD2\" x=\"0\" y=\"-3.685\" dx=\"1.8\" dy=\"1.5\" layer=\"1\" rot=\"R90\" stop=\"no\" cream=\"no\"/>\n<wire x1=\"-2\" y1=\"7\" x2=\"-2\" y2=\"0\" width=\"0\" layer=\"51\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"M02\">\n<wire x1=\"3.81\" y1=\"-2.54\" x2=\"-2.54\" y2=\"-2.54\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"2.54\" x2=\"2.54\" y2=\"2.54\" width=\"0.6096\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"0\" x2=\"2.54\" y2=\"0\" width=\"0.6096\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"5.08\" x2=\"-2.54\" y2=\"-2.54\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"3.81\" y1=\"-2.54\" x2=\"3.81\" y2=\"5.08\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"5.08\" x2=\"3.81\" y2=\"5.08\" width=\"0.4064\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"-5.08\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<text x=\"-2.54\" y=\"5.842\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<pin name=\"1\" x=\"7.62\" y=\"0\" visible=\"pad\" length=\"middle\" direction=\"pas\" swaplevel=\"1\" rot=\"R180\"/>\n<pin name=\"2\" x=\"7.62\" y=\"2.54\" visible=\"pad\" length=\"middle\" direction=\"pas\" swaplevel=\"1\" rot=\"R180\"/>\n</symbol>\n<symbol name=\"MICROB-PLUG\">\n<wire x1=\"-5.08\" y1=\"7.62\" x2=\"-5.08\" y2=\"-7.62\" width=\"0.508\" layer=\"94\"/>\n<wire x1=\"-5.08\" y1=\"-7.62\" x2=\"5.08\" y2=\"-7.62\" width=\"0.508\" layer=\"94\"/>\n<wire x1=\"5.08\" y1=\"-7.62\" x2=\"5.08\" y2=\"7.62\" width=\"0.508\" layer=\"94\"/>\n<wire x1=\"5.08\" y1=\"7.62\" x2=\"-5.08\" y2=\"7.62\" width=\"0.508\" layer=\"94\"/>\n<text x=\"-4.826\" y=\"8.128\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"-5.08\" y=\"-9.906\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"VCC\" x=\"-7.62\" y=\"5.08\" visible=\"off\" length=\"short\"/>\n<pin name=\"D-\" x=\"-7.62\" y=\"2.54\" visible=\"off\" length=\"short\"/>\n<pin name=\"D+\" x=\"-7.62\" y=\"0\" visible=\"off\" length=\"short\"/>\n<pin name=\"ID\" x=\"-7.62\" y=\"-2.54\" visible=\"off\" length=\"short\"/>\n<pin name=\"GND\" x=\"-7.62\" y=\"-5.08\" visible=\"off\" length=\"short\"/>\n<pin name=\"SHIELD\" x=\"7.62\" y=\"0\" visible=\"off\" length=\"short\" rot=\"R180\"/>\n<text x=\"4.064\" y=\"0\" size=\"0.8128\" layer=\"95\" rot=\"R90\" align=\"bottom-center\">SHIELD</text>\n<text x=\"-3.81\" y=\"5.08\" size=\"1.4224\" layer=\"95\" font=\"vector\" ratio=\"12\" align=\"center-left\">VCC</text>\n<text x=\"-3.81\" y=\"2.54\" size=\"1.4224\" layer=\"95\" font=\"vector\" ratio=\"12\" align=\"center-left\">D-</text>\n<text x=\"-3.81\" y=\"0\" size=\"1.4224\" layer=\"95\" font=\"vector\" ratio=\"12\" align=\"center-left\">D+</text>\n<text x=\"-3.81\" y=\"-2.54\" size=\"1.4224\" layer=\"95\" font=\"vector\" ratio=\"12\" align=\"center-left\">ID</text>\n<text x=\"-3.81\" y=\"-5.08\" size=\"1.4224\" layer=\"95\" font=\"vector\" ratio=\"12\" align=\"center-left\">GND</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"M02\" prefix=\"J\" uservalue=\"yes\">\n<description>Standard 2-pin 0.1\" header. Use with &lt;br&gt;\n- straight break away headers ( PRT-00116)&lt;br&gt;\n- right angle break away headers (PRT-00553)&lt;br&gt;\n- swiss pins (PRT-00743)&lt;br&gt;\n- machine pins (PRT-00117)&lt;br&gt;\n- female headers (PRT-00115)&lt;br&gt;&lt;br&gt;\n\n Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.&lt;br&gt;&lt;br&gt;\n\n2.54_SCREWTERM for use with  PRT-10571.&lt;br&gt;&lt;br&gt;\n\n3.5mm Screw Terminal footprints for  PRT-08084&lt;br&gt;&lt;br&gt;\n\n5mm Screw Terminal footprints for use with PRT-08432</description>\n<gates>\n<gate name=\"G$1\" symbol=\"M02\" x=\"-2.54\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"PTH\" package=\"1X02\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"POLAR\" package=\"MOLEX-1X2\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"3.5MM\" package=\"SCREWTERMINAL-3.5MM-2\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-08399\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-JST-2MM-SMT\" package=\"JST-2-SMD\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"1\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-11443\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"PTH2\" package=\"1X02_BIG\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"4UCON-15767\" package=\"JST-2-SMD-VERT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"GND\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"VCC\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"ROCKER\" package=\"R_SW_TH\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$3\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$4\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"5MM\" package=\"SCREWTERMINAL-5MM-2\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"STOREFRONT_ID\" value=\"PRT-08432\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"LOCK\" package=\"1X02_LOCK\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"POLAR_LOCK\" package=\"MOLEX-1X2_LOCK\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"LOCK_LONGPADS\" package=\"1X02_LOCK_LONGPADS\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"3.5MM_LOCK\" package=\"SCREWTERMINAL-3.5MM-2_LOCK\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-08399\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"PTH3\" package=\"1X02_LONGPADS\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"1X02_NO_SILK\" package=\"1X02_NO_SILK\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"JST-PTH-2\" package=\"JST-2-PTH\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-09863\" constant=\"no\"/>\n<attribute name=\"SKU\" value=\"PRT-09914\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"PTH4\" package=\"1X02_XTRA_BIG\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"POGO_PIN_HOLES_ONLY\" package=\"1X02_PP_HOLES_ONLY\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"3.5MM-NO_SILK\" package=\"SCREWTERMINAL-3.5MM-2-NS\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-08399\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-JST-2-PTH-NO_SILK\" package=\"JST-2-PTH-NS\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"JST-PTH-2-KIT\" package=\"JST-2-PTH-KIT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"SPRING-2.54-RA\" package=\"SPRINGTERMINAL-2.54MM-2\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"2.54MM_SCREWTERM\" package=\"1X02_2.54_SCREWTERM\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"JST-PTH-VERT\" package=\"JST-2-PTH-VERT\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"USB_MICROB_PLUG\" prefix=\"J\" uservalue=\"yes\">\n<description>USB Micro-B connectors&lt;br&gt;\nSome male, some female. Watch your step!</description>\n<gates>\n<gate name=\"G$1\" symbol=\"MICROB-PLUG\" x=\"7.62\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"&quot;\" package=\"MICRO-B-RA-SMT\">\n<connects>\n<connect gate=\"G$1\" pin=\"D+\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"D-\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"ID\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"VCC\" pad=\"1\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"-PTH\" package=\"MICRO-B-RA-TH\">\n<connects>\n<connect gate=\"G$1\" pin=\"D+\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"D-\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"ID\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"VCC\" pad=\"1\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"-PTH2\" package=\"MICRO-B-TH\">\n<connects>\n<connect gate=\"G$1\" pin=\"D+\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"D-\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"ID\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"VCC\" pad=\"1\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"-SMT\" package=\"MICRO-B-SMT\">\n<connects>\n<connect gate=\"G$1\" pin=\"D+\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"D-\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"ID\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"SHIELD\" pad=\"P$6\"/>\n<connect gate=\"G$1\" pin=\"VCC\" pad=\"1\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-09900\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"CONN-11752\" package=\"USB-B-MICRO-SMD_V03\">\n<connects>\n<connect gate=\"G$1\" pin=\"D+\" pad=\"D+\"/>\n<connect gate=\"G$1\" pin=\"D-\" pad=\"D-\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"GND\"/>\n<connect gate=\"G$1\" pin=\"ID\" pad=\"ID\"/>\n<connect gate=\"G$1\" pin=\"SHIELD\" pad=\"SHIELD1 SHIELD2 SHIELD3\"/>\n<connect gate=\"G$1\" pin=\"VCC\" pad=\"VBUS\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"CONN-11752\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-PowerIC\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find drivers, regulators, and amplifiers.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SOT23-5\">\n<description>&lt;b&gt;Small Outline Transistor&lt;/b&gt;</description>\n<wire x1=\"1.27\" y1=\"0.4294\" x2=\"1.27\" y2=\"-0.4294\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"-0.8\" x2=\"-1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.27\" y1=\"-0.4294\" x2=\"-1.27\" y2=\"0.4294\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.4\" y1=\"0.8\" x2=\"1.4\" y2=\"0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.2684\" y1=\"0.7088\" x2=\"0.2684\" y2=\"0.7088\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"0.8\" x2=\"1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"0.8\" x2=\"-1.4\" y2=\"-0.8\" width=\"0.1524\" layer=\"51\"/>\n<rectangle x1=\"-1.2\" y1=\"-1.5\" x2=\"-0.7\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"-0.25\" y1=\"-1.5\" x2=\"0.25\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"0.7\" y1=\"-1.5\" x2=\"1.2\" y2=\"-0.85\" layer=\"51\"/>\n<rectangle x1=\"0.7\" y1=\"0.85\" x2=\"1.2\" y2=\"1.5\" layer=\"51\"/>\n<rectangle x1=\"-1.2\" y1=\"0.85\" x2=\"-0.7\" y2=\"1.5\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.95\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"0\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"3\" x=\"0.95\" y=\"-1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"4\" x=\"0.95\" y=\"1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"5\" x=\"-0.95\" y=\"1.3001\" dx=\"0.55\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"2.159\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-0.9525\" y=\"-0.1905\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<circle x=\"-1.6002\" y=\"-1.016\" radius=\"0.127\" width=\"0\" layer=\"21\"/>\n</package>\n<package name=\"PTC\">\n<wire x1=\"-3.81\" y1=\"1.524\" x2=\"3.81\" y2=\"1.524\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"1.524\" x2=\"3.81\" y2=\"-1.524\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.81\" y1=\"-1.524\" x2=\"-3.81\" y2=\"-1.524\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-3.81\" y1=\"-1.524\" x2=\"-3.81\" y2=\"1.524\" width=\"0.2032\" layer=\"21\"/>\n<pad name=\"P$1\" x=\"-2.54\" y=\"0\" drill=\"0.8\" diameter=\"1.8796\"/>\n<pad name=\"P$2\" x=\"2.54\" y=\"0\" drill=\"0.8\" diameter=\"1.8796\"/>\n<text x=\"-3.81\" y=\"1.705\" size=\"0.4318\" layer=\"25\">&gt;Name</text>\n<text x=\"-3.81\" y=\"-2.14\" size=\"0.4318\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"PTC-1206\">\n<wire x1=\"-1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.635\" y1=\"-0.762\" x2=\"-0.635\" y2=\"-0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.635\" y1=\"0.762\" x2=\"0.635\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.143\" y1=\"-1.016\" x2=\"0.254\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.254\" y1=\"1.016\" x2=\"1.143\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.4\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<smd name=\"2\" x=\"1.4\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<text x=\"-1.524\" y=\"1.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.524\" y=\"-1.651\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"0603\">\n<wire x1=\"-1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"0.983\" x2=\"1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"-0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-1.473\" y1=\"-0.983\" x2=\"-1.473\" y2=\"0.983\" width=\"0.0508\" layer=\"39\"/>\n<wire x1=\"-0.356\" y1=\"0.432\" x2=\"0.356\" y2=\"0.432\" width=\"0.1016\" layer=\"51\"/>\n<wire x1=\"-0.356\" y1=\"-0.419\" x2=\"0.356\" y2=\"-0.419\" width=\"0.1016\" layer=\"51\"/>\n<smd name=\"1\" x=\"-0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.85\" y=\"0\" dx=\"1.1\" dy=\"1\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"0.762\" size=\"0.4064\" layer=\"25\" font=\"vector\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-1.143\" size=\"0.4064\" layer=\"27\" font=\"vector\">&gt;VALUE</text>\n<rectangle x1=\"-0.8382\" y1=\"-0.4699\" x2=\"-0.3381\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"0.3302\" y1=\"-0.4699\" x2=\"0.8303\" y2=\"0.4801\" layer=\"51\"/>\n<rectangle x1=\"-0.1999\" y1=\"-0.3\" x2=\"0.1999\" y2=\"0.3\" layer=\"35\"/>\n</package>\n<package name=\"PTC-1206-WIDE\">\n<wire x1=\"-1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"0.75\" x2=\"1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"-0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.5\" y1=\"-0.75\" x2=\"-1.5\" y2=\"0.75\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.635\" y1=\"-0.762\" x2=\"-0.635\" y2=\"-0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.635\" y1=\"0.762\" x2=\"0.635\" y2=\"0.762\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.143\" y1=\"-1.016\" x2=\"0.254\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.254\" y1=\"1.016\" x2=\"1.143\" y2=\"1.016\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.654\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<smd name=\"2\" x=\"1.654\" y=\"0\" dx=\"1\" dy=\"1.8\" layer=\"1\"/>\n<text x=\"-1.524\" y=\"1.27\" size=\"0.4064\" layer=\"25\">&gt;Name</text>\n<text x=\"-1.524\" y=\"-1.651\" size=\"0.4064\" layer=\"27\">&gt;Value</text>\n</package>\n<package name=\"SC70\">\n<wire x1=\"1\" y1=\"0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"-1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"0.625\" x2=\"1\" y2=\"0.625\" width=\"0.127\" layer=\"21\"/>\n<smd name=\"1\" x=\"-0.65\" y=\"-0.825\" dx=\"0.4\" dy=\"0.75\" layer=\"1\" cream=\"no\"/>\n<smd name=\"2\" x=\"0\" y=\"-0.825\" dx=\"0.4\" dy=\"0.75\" layer=\"1\" cream=\"no\"/>\n<smd name=\"3\" x=\"0.65\" y=\"-0.825\" dx=\"0.4\" dy=\"0.75\" layer=\"1\" cream=\"no\"/>\n<smd name=\"4\" x=\"0.65\" y=\"0.825\" dx=\"0.4\" dy=\"0.75\" layer=\"1\" cream=\"no\"/>\n<smd name=\"5\" x=\"-0.65\" y=\"0.825\" dx=\"0.4\" dy=\"0.75\" layer=\"1\" cream=\"no\"/>\n<text x=\"-0.889\" y=\"1.524\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-0.762\" y=\"-0.254\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<rectangle x1=\"-0.85\" y1=\"0.45\" x2=\"-0.45\" y2=\"1.2\" layer=\"31\"/>\n<rectangle x1=\"0.45\" y1=\"0.45\" x2=\"0.85\" y2=\"1.2\" layer=\"31\"/>\n<rectangle x1=\"-0.8382\" y1=\"-1.1684\" x2=\"-0.508\" y2=\"-0.4826\" layer=\"31\"/>\n<rectangle x1=\"-0.1651\" y1=\"-1.1684\" x2=\"0.1651\" y2=\"-0.4826\" layer=\"31\"/>\n<rectangle x1=\"0.508\" y1=\"-1.1684\" x2=\"0.8382\" y2=\"-0.4826\" layer=\"31\"/>\n<wire x1=\"-1\" y1=\"0.625\" x2=\"1\" y2=\"0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1\" y1=\"0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"1\" y2=\"-0.625\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-1\" y1=\"-0.625\" x2=\"-1\" y2=\"0.625\" width=\"0.127\" layer=\"21\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"MCP73831\">\n<wire x1=\"-7.62\" y1=\"5.08\" x2=\"7.62\" y2=\"5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"7.62\" y1=\"5.08\" x2=\"7.62\" y2=\"-5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"7.62\" y1=\"-5.08\" x2=\"-7.62\" y2=\"-5.08\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-7.62\" y1=\"-5.08\" x2=\"-7.62\" y2=\"5.08\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-7.62\" y=\"5.588\" size=\"1.778\" layer=\"95\">&gt;Name</text>\n<text x=\"-7.62\" y=\"-7.62\" size=\"1.778\" layer=\"96\">&gt;Value</text>\n<pin name=\"VIN\" x=\"-10.16\" y=\"2.54\" length=\"short\" direction=\"pwr\"/>\n<pin name=\"STAT\" x=\"-10.16\" y=\"-2.54\" length=\"short\" direction=\"out\"/>\n<pin name=\"VBAT\" x=\"10.16\" y=\"2.54\" length=\"short\" direction=\"pwr\" rot=\"R180\"/>\n<pin name=\"PROG\" x=\"10.16\" y=\"0\" length=\"short\" direction=\"in\" rot=\"R180\"/>\n<pin name=\"VSS\" x=\"10.16\" y=\"-2.54\" length=\"short\" direction=\"pwr\" rot=\"R180\"/>\n</symbol>\n<symbol name=\"PTC\">\n<wire x1=\"5.08\" y1=\"1.27\" x2=\"5.08\" y2=\"-1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"5.08\" y1=\"-1.27\" x2=\"-2.54\" y2=\"-1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"-1.27\" x2=\"-2.54\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-2.54\" y1=\"1.27\" x2=\"5.08\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-1.524\" y1=\"-2.54\" x2=\"3.81\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"3.81\" y1=\"2.54\" x2=\"5.08\" y2=\"2.54\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"3.048\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"-3.302\" y=\"-5.08\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"1\" x=\"-5.08\" y=\"0\" visible=\"off\" length=\"short\"/>\n<pin name=\"2\" x=\"7.62\" y=\"0\" visible=\"off\" length=\"short\" rot=\"R180\"/>\n</symbol>\n<symbol name=\"V-REG-LDO\">\n<wire x1=\"-7.62\" y1=\"-7.62\" x2=\"5.08\" y2=\"-7.62\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"5.08\" y1=\"-7.62\" x2=\"5.08\" y2=\"7.62\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"5.08\" y1=\"7.62\" x2=\"-7.62\" y2=\"7.62\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-7.62\" y1=\"7.62\" x2=\"-7.62\" y2=\"-7.62\" width=\"0.4064\" layer=\"94\"/>\n<text x=\"-7.62\" y=\"9.144\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"-7.62\" y=\"-11.43\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"IN\" x=\"-10.16\" y=\"5.08\" visible=\"pin\" length=\"short\" direction=\"in\"/>\n<pin name=\"GND\" x=\"-10.16\" y=\"-5.08\" visible=\"pin\" length=\"short\" direction=\"in\"/>\n<pin name=\"OUT\" x=\"7.62\" y=\"5.08\" visible=\"pin\" length=\"short\" direction=\"pas\" rot=\"R180\"/>\n<pin name=\"EN\" x=\"-10.16\" y=\"0\" visible=\"pin\" length=\"short\" direction=\"in\"/>\n<pin name=\"BP\" x=\"7.62\" y=\"-5.08\" visible=\"pin\" length=\"short\" direction=\"in\" rot=\"R180\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"MCP73831\" prefix=\"U\">\n<description>&lt;b&gt;Miniature single cell, fully integrated Li-Ion, Li-polymer charge management controller&lt;/b&gt;&lt;br&gt;\nhttp://ww1.microchip.com/downloads/en/DeviceDoc/20001984g.pdf&lt;br&gt;\nIC-09995</description>\n<gates>\n<gate name=\"G$1\" symbol=\"MCP73831\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"SOT23-5\">\n<connects>\n<connect gate=\"G$1\" pin=\"PROG\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"STAT\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"VBAT\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"VIN\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"VSS\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"IC-09995\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"PTC\" prefix=\"F\">\n<description>&lt;b&gt;Resettable Fuse PTC&lt;/b&gt;\nResettable Fuse. Spark Fun Electronics SKU : COM-08357</description>\n<gates>\n<gate name=\"G$1\" symbol=\"PTC\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"PTH\" package=\"PTC\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"P$1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"P$2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"SMD\" package=\"PTC-1206\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-11150\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"0603\" package=\"0603\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"SMD-W\" package=\"PTC-1206-WIDE\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"THERMISTOR1206\" package=\"PTC-1206\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"RES-08585\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"V_REG_LDO\" prefix=\"U\">\n<description>&lt;b&gt;Voltage Regulator LDO&lt;/b&gt;\nStandard 150mA LDO voltage regulator in SOT-23 layout. Micrel part MIC5205. BP (by-pass) pin is used to lower output noise with 470pF cap.</description>\n<gates>\n<gate name=\"G$1\" symbol=\"V-REG-LDO\" x=\"2.54\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"SMD\" package=\"SOT23-5\">\n<connects>\n<connect gate=\"G$1\" pin=\"BP\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"EN\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"IN\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"OUT\" pad=\"5\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"SMD2\" package=\"SC70\">\n<connects>\n<connect gate=\"G$1\" pin=\"BP\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"EN\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"GND\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"IN\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"OUT\" pad=\"5\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"VREG-08428\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun\">\n<packages>\n</packages>\n<symbols>\n<symbol name=\"GND\">\n<wire x1=\"-1.905\" y1=\"0\" x2=\"1.905\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"-2.54\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"GND\" x=\"0\" y=\"2.54\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R270\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"GND\" prefix=\"GND\">\n<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>\n<gates>\n<gate name=\"1\" symbol=\"GND\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-DigitalIC\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find all manner of digital ICs- microcontrollers, memory chips, logic chips, FPGAs, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SSOP20_L\">\n<description>Longer version of SSOP-20 Package</description>\n<wire x1=\"4.3307\" y1=\"-1.9558\" x2=\"4.3307\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n<circle x=\"-3.81\" y=\"-2.54\" radius=\"0.254\" width=\"0\" layer=\"21\"/>\n<text x=\"0\" y=\"0\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"0\" y=\"-1.27\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n<smd name=\"16\" x=\"-0.3175\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"15\" x=\"0.3175\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"14\" x=\"0.9525\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"13\" x=\"1.5875\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"12\" x=\"2.2225\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"11\" x=\"2.8575\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"17\" x=\"-0.9525\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"18\" x=\"-1.5875\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"19\" x=\"-2.2225\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"20\" x=\"-2.8575\" y=\"2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\"/>\n<smd name=\"6\" x=\"0.3175\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"5\" x=\"-0.3175\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"4\" x=\"-0.9525\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"3\" x=\"-1.5875\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"2\" x=\"-2.2225\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"1\" x=\"-2.8575\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"7\" x=\"0.9525\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"8\" x=\"1.5875\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"9\" x=\"2.2225\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"10\" x=\"2.8575\" y=\"-2.6797\" dx=\"0.381\" dy=\"1.143\" layer=\"1\" rot=\"R180\"/>\n<rectangle x1=\"0.1905\" y1=\"-2.9845\" x2=\"0.4445\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"0.8255\" y1=\"-2.9845\" x2=\"1.0795\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"1.4605\" y1=\"-2.9845\" x2=\"1.7145\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"2.0955\" y1=\"-2.9845\" x2=\"2.3495\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"2.7305\" y1=\"-2.9845\" x2=\"2.9845\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-0.4445\" y1=\"-2.9845\" x2=\"-0.1905\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-1.0795\" y1=\"-2.9845\" x2=\"-0.8255\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-1.7145\" y1=\"-2.9845\" x2=\"-1.4605\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-2.3495\" y1=\"-2.9845\" x2=\"-2.0955\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-2.9845\" y1=\"-2.9845\" x2=\"-2.7305\" y2=\"-2.3495\" layer=\"51\"/>\n<rectangle x1=\"-0.4445\" y1=\"2.3495\" x2=\"-0.1905\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-1.0795\" y1=\"2.3495\" x2=\"-0.8255\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-1.7145\" y1=\"2.3495\" x2=\"-1.4605\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-2.3495\" y1=\"2.3495\" x2=\"-2.0955\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"-2.9845\" y1=\"2.3495\" x2=\"-2.7305\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"0.1905\" y1=\"2.3495\" x2=\"0.4445\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"0.8255\" y1=\"2.3495\" x2=\"1.0795\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"1.4605\" y1=\"2.3495\" x2=\"1.7145\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"2.0955\" y1=\"2.3495\" x2=\"2.3495\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<rectangle x1=\"2.7305\" y1=\"2.3495\" x2=\"2.9845\" y2=\"2.9845\" layer=\"51\" rot=\"R180\"/>\n<wire x1=\"-4.3307\" y1=\"1.9558\" x2=\"-4.3307\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.3307\" y1=\"-1.9558\" x2=\"-3.2512\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2512\" y1=\"-1.9558\" x2=\"4.3307\" y2=\"-1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-4.3307\" y1=\"1.9558\" x2=\"-3.2512\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"3.2512\" y1=\"1.9558\" x2=\"4.3307\" y2=\"1.9558\" width=\"0.2032\" layer=\"21\"/>\n</package>\n</packages>\n<symbols>\n<symbol name=\"FT231X\">\n<pin name=\"VCC\" x=\"-12.7\" y=\"15.24\" length=\"short\"/>\n<pin name=\"VCCIO\" x=\"-12.7\" y=\"12.7\" length=\"short\"/>\n<pin name=\"3V3OUT\" x=\"-12.7\" y=\"10.16\" length=\"short\"/>\n<pin name=\"USBDM\" x=\"-12.7\" y=\"5.08\" length=\"short\"/>\n<pin name=\"USBDP\" x=\"-12.7\" y=\"2.54\" length=\"short\"/>\n<pin name=\"!RESET\" x=\"-12.7\" y=\"-2.54\" length=\"short\"/>\n<pin name=\"GND@6\" x=\"-12.7\" y=\"-12.7\" length=\"short\"/>\n<pin name=\"GND@16\" x=\"-12.7\" y=\"-15.24\" length=\"short\"/>\n<pin name=\"TXD\" x=\"12.7\" y=\"15.24\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CBUS3\" x=\"12.7\" y=\"-15.24\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CBUS2\" x=\"12.7\" y=\"-12.7\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CBUS1\" x=\"12.7\" y=\"-10.16\" length=\"short\" rot=\"R180\"/>\n<pin name=\"CBUS0\" x=\"12.7\" y=\"-7.62\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!RI\" x=\"12.7\" y=\"-5.08\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!DCD\" x=\"12.7\" y=\"-2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!DSR\" x=\"12.7\" y=\"0\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!DTR\" x=\"12.7\" y=\"2.54\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!CTS\" x=\"12.7\" y=\"5.08\" length=\"short\" rot=\"R180\"/>\n<pin name=\"!RTS\" x=\"12.7\" y=\"7.62\" length=\"short\" rot=\"R180\"/>\n<pin name=\"RXD\" x=\"12.7\" y=\"12.7\" length=\"short\" rot=\"R180\"/>\n<wire x1=\"-10.16\" y1=\"17.78\" x2=\"-10.16\" y2=\"-17.78\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-10.16\" y1=\"-17.78\" x2=\"10.16\" y2=\"-17.78\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"10.16\" y1=\"-17.78\" x2=\"10.16\" y2=\"17.78\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"10.16\" y1=\"17.78\" x2=\"-10.16\" y2=\"17.78\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-10.16\" y=\"18.034\" size=\"1.778\" layer=\"95\">&gt;Name</text>\n<text x=\"-10.16\" y=\"-18.288\" size=\"1.778\" layer=\"96\" align=\"top-left\">&gt;Value</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"FT231X\" prefix=\"U\">\n<description>&lt;h3&gt;FTDI FT231X Full Speed USB to Full-handshake UART&lt;/h3&gt;\nThis USB2.0 Full Speed  IC offers a compact bridge to full handshake UART interfaces. The device is a UART, capable of operating up to 3MBaud, with low power consumption (8mA). The FT231X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.&lt;br&gt;&lt;br&gt;</description>\n<gates>\n<gate name=\"U$1\" symbol=\"FT231X\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"S\" package=\"SSOP20_L\">\n<connects>\n<connect gate=\"U$1\" pin=\"!CTS\" pad=\"9\"/>\n<connect gate=\"U$1\" pin=\"!DCD\" pad=\"8\"/>\n<connect gate=\"U$1\" pin=\"!DSR\" pad=\"7\"/>\n<connect gate=\"U$1\" pin=\"!DTR\" pad=\"1\"/>\n<connect gate=\"U$1\" pin=\"!RESET\" pad=\"14\"/>\n<connect gate=\"U$1\" pin=\"!RI\" pad=\"5\"/>\n<connect gate=\"U$1\" pin=\"!RTS\" pad=\"2\"/>\n<connect gate=\"U$1\" pin=\"3V3OUT\" pad=\"13\"/>\n<connect gate=\"U$1\" pin=\"CBUS0\" pad=\"18\"/>\n<connect gate=\"U$1\" pin=\"CBUS1\" pad=\"17\"/>\n<connect gate=\"U$1\" pin=\"CBUS2\" pad=\"10\"/>\n<connect gate=\"U$1\" pin=\"CBUS3\" pad=\"19\"/>\n<connect gate=\"U$1\" pin=\"GND@16\" pad=\"16\"/>\n<connect gate=\"U$1\" pin=\"GND@6\" pad=\"6\"/>\n<connect gate=\"U$1\" pin=\"RXD\" pad=\"4\"/>\n<connect gate=\"U$1\" pin=\"TXD\" pad=\"20\"/>\n<connect gate=\"U$1\" pin=\"USBDM\" pad=\"12\"/>\n<connect gate=\"U$1\" pin=\"USBDP\" pad=\"11\"/>\n<connect gate=\"U$1\" pin=\"VCC\" pad=\"15\"/>\n<connect gate=\"U$1\" pin=\"VCCIO\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"IC-11524\"/>\n<attribute name=\"VALUE\" value=\"FT231XS\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"SparkFun-DiscreteSemi\">\n<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;\nIn this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.&lt;br&gt;&lt;br&gt;\nWe've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.\n&lt;br&gt;&lt;br&gt;\n&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ \n&lt;br&gt;&lt;br&gt;\nYou are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>\n<packages>\n<package name=\"SOD-323\">\n<wire x1=\"-0.9\" y1=\"0.65\" x2=\"-0.5\" y2=\"0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"0.65\" x2=\"0.9\" y2=\"0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.9\" y1=\"-0.65\" x2=\"-0.5\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"-0.65\" x2=\"0.9\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-0.5\" y1=\"0.65\" x2=\"-0.5\" y2=\"-0.65\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"C\" x=\"-1.15\" y=\"0\" dx=\"0.63\" dy=\"0.83\" layer=\"1\"/>\n<smd name=\"A\" x=\"1.15\" y=\"0\" dx=\"0.63\" dy=\"0.83\" layer=\"1\"/>\n<text x=\"-0.889\" y=\"1.016\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-1.397\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"SOD-523\">\n<smd name=\"C\" x=\"0.7\" y=\"0\" dx=\"0.4\" dy=\"0.4\" layer=\"1\"/>\n<smd name=\"A\" x=\"-0.7\" y=\"0\" dx=\"0.4\" dy=\"0.4\" layer=\"1\"/>\n<wire x1=\"-0.6\" y1=\"-0.4\" x2=\"0.4\" y2=\"-0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.4\" y1=\"-0.4\" x2=\"0.6\" y2=\"-0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.6\" y1=\"0.4\" x2=\"0.4\" y2=\"0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.4\" y1=\"0.4\" x2=\"-0.6\" y2=\"0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.6\" y1=\"0.4\" x2=\"0.4\" y2=\"0.6\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.6\" y1=\"-0.4\" x2=\"0.4\" y2=\"-0.6\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.4\" y1=\"-0.6\" x2=\"0.4\" y2=\"-0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"0.4\" y1=\"0.6\" x2=\"0.4\" y2=\"0.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-0.6\" y1=\"-0.4\" x2=\"0.3\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.3\" y1=\"-0.4\" x2=\"0.6\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.6\" y1=\"-0.4\" x2=\"0.6\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.6\" y1=\"-0.1\" x2=\"0.6\" y2=\"0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.6\" y1=\"0.1\" x2=\"0.6\" y2=\"0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.6\" y1=\"0.4\" x2=\"0.3\" y2=\"0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.3\" y1=\"0.4\" x2=\"-0.6\" y2=\"0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.6\" y1=\"0.4\" x2=\"-0.6\" y2=\"0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.6\" y1=\"0.1\" x2=\"-0.6\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.6\" y1=\"-0.1\" x2=\"-0.6\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.6\" y1=\"0.1\" x2=\"0.8\" y2=\"0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.8\" y1=\"0.1\" x2=\"0.8\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.8\" y1=\"-0.1\" x2=\"0.6\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.6\" y1=\"-0.1\" x2=\"-0.8\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.6\" y1=\"0.1\" x2=\"-0.8\" y2=\"0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-0.8\" y1=\"0.1\" x2=\"-0.8\" y2=\"-0.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"0.3\" y1=\"0.4\" x2=\"0.3\" y2=\"-0.4\" width=\"0.127\" layer=\"51\"/>\n</package>\n<package name=\"SMA-DIODE\">\n<description>&lt;B&gt;Diode&lt;/B&gt;&lt;p&gt;\nBasic SMA packaged diode. Good for reverse polarization protection. Common part #: MBRA140</description>\n<wire x1=\"-2.3\" y1=\"1\" x2=\"-2.3\" y2=\"1.45\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.3\" y1=\"1.45\" x2=\"2.3\" y2=\"1.45\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.3\" y1=\"1.45\" x2=\"2.3\" y2=\"1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.3\" y1=\"-1\" x2=\"2.3\" y2=\"-1.45\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"2.3\" y1=\"-1.45\" x2=\"-2.3\" y2=\"-1.45\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-2.3\" y1=\"-1.45\" x2=\"-2.3\" y2=\"-1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1\" y1=\"1\" x2=\"1\" y2=\"-1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"A\" x=\"-2.15\" y=\"0\" dx=\"1.27\" dy=\"1.47\" layer=\"1\" rot=\"R180\"/>\n<smd name=\"C\" x=\"2.15\" y=\"0\" dx=\"1.27\" dy=\"1.47\" layer=\"1\"/>\n<text x=\"-2.286\" y=\"1.651\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"0.254\" y=\"1.651\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"SOT23-3\">\n<wire x1=\"1.4224\" y1=\"0.6604\" x2=\"1.4224\" y2=\"-0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.4224\" y1=\"-0.6604\" x2=\"-1.4224\" y2=\"-0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4224\" y1=\"-0.6604\" x2=\"-1.4224\" y2=\"0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.4224\" y1=\"0.6604\" x2=\"1.4224\" y2=\"0.6604\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.8\" y1=\"0.7\" x2=\"-1.4\" y2=\"0.7\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-1.4\" y1=\"0.7\" x2=\"-1.4\" y2=\"-0.1\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"0.8\" y1=\"0.7\" x2=\"1.4\" y2=\"0.7\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"1.4\" y1=\"0.7\" x2=\"1.4\" y2=\"-0.1\" width=\"0.2032\" layer=\"21\"/>\n<smd name=\"1\" x=\"-0.95\" y=\"-1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"2\" x=\"0.95\" y=\"-1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<smd name=\"3\" x=\"0\" y=\"1.1\" dx=\"0.8\" dy=\"0.9\" layer=\"1\"/>\n<text x=\"-0.8255\" y=\"1.778\" size=\"0.4064\" layer=\"25\">&gt;NAME</text>\n<text x=\"-1.016\" y=\"-0.1905\" size=\"0.4064\" layer=\"27\">&gt;VALUE</text>\n</package>\n<package name=\"TO220V\">\n<description>&lt;b&gt;TO 220 Vertical&lt;/b&gt; Package works with various parts including N-Channel MOSFET SparkFun SKU: COM-10213</description>\n<wire x1=\"-5.08\" y1=\"2.032\" x2=\"-5.08\" y2=\"-0.381\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"2.032\" x2=\"5.08\" y2=\"-0.381\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"2.032\" x2=\"-5.08\" y2=\"2.032\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-5.08\" y1=\"2.032\" x2=\"-5.08\" y2=\"3.048\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-5.08\" y1=\"3.048\" x2=\"5.08\" y2=\"3.048\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"5.08\" y1=\"3.048\" x2=\"5.08\" y2=\"2.032\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"-5.08\" y1=\"-0.381\" x2=\"-4.191\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\" curve=\"92.798868\"/>\n<wire x1=\"4.191\" y1=\"-1.27\" x2=\"5.08\" y2=\"-0.381\" width=\"0.2032\" layer=\"21\" curve=\"92.798868\"/>\n<wire x1=\"-4.191\" y1=\"-1.27\" x2=\"-3.81\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<wire x1=\"4.191\" y1=\"-1.27\" x2=\"3.81\" y2=\"-1.27\" width=\"0.2032\" layer=\"21\"/>\n<rectangle x1=\"-5.08\" y1=\"2.032\" x2=\"5.08\" y2=\"3.048\" layer=\"21\"/>\n<pad name=\"1\" x=\"-2.54\" y=\"0\" drill=\"1.016\" shape=\"long\" rot=\"R90\"/>\n<pad name=\"2\" x=\"0\" y=\"0\" drill=\"1.016\" shape=\"long\" rot=\"R90\"/>\n<pad name=\"3\" x=\"2.54\" y=\"0\" drill=\"1.016\" shape=\"long\" rot=\"R90\"/>\n<text x=\"-2.794\" y=\"3.429\" size=\"1.27\" layer=\"25\" ratio=\"10\">&gt;NAME</text>\n<text x=\"-3.302\" y=\"-3.302\" size=\"1.27\" layer=\"27\" ratio=\"10\">&gt;VALUE</text>\n</package>\n</packages>\n<symbols>\n<symbol name=\"DIODE-SCHOTTKY\">\n<wire x1=\"-1.27\" y1=\"-1.27\" x2=\"1.27\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"0\" x2=\"-1.27\" y2=\"1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"1.27\" x2=\"1.27\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-1.27\" y1=\"1.27\" x2=\"-1.27\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"-1.27\" y1=\"0\" x2=\"-1.27\" y2=\"-1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"0\" x2=\"1.27\" y2=\"-1.27\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"1.27\" x2=\"1.778\" y2=\"1.524\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"1.27\" y1=\"-1.27\" x2=\"0.762\" y2=\"-1.524\" width=\"0.254\" layer=\"94\"/>\n<text x=\"2.54\" y=\"0.4826\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"2.54\" y=\"-2.3114\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"A\" x=\"-2.54\" y=\"0\" visible=\"off\" length=\"point\" direction=\"pas\"/>\n<pin name=\"C\" x=\"2.54\" y=\"0\" visible=\"off\" length=\"point\" direction=\"pas\" rot=\"R180\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"-1.27\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"1.27\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n</symbol>\n<symbol name=\"MOSFET-PCHANNEL\">\n<wire x1=\"-3.6576\" y1=\"2.413\" x2=\"-3.6576\" y2=\"-2.54\" width=\"0.254\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"1.905\" x2=\"-2.0066\" y2=\"1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"-1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-2.032\" y1=\"-1.905\" x2=\"0\" y2=\"-1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"2.54\" x2=\"0\" y2=\"1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"1.905\" x2=\"2.54\" y2=\"1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-1.905\" x2=\"0\" y2=\"-1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"-1.905\" x2=\"0\" y2=\"-2.54\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-1.905\" x2=\"2.54\" y2=\"-0.762\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-0.762\" x2=\"2.54\" y2=\"1.905\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-0.762\" x2=\"3.175\" y2=\"0.635\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"3.175\" y1=\"0.635\" x2=\"1.905\" y2=\"0.635\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.905\" y1=\"0.635\" x2=\"2.54\" y2=\"-0.762\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"3.175\" y1=\"-0.762\" x2=\"2.54\" y2=\"-0.762\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"2.54\" y1=\"-0.762\" x2=\"1.905\" y2=\"-0.762\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"1.905\" y1=\"-0.762\" x2=\"1.651\" y2=\"-1.016\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"3.175\" y1=\"-0.762\" x2=\"3.429\" y2=\"-0.508\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"-1.27\" y2=\"0.508\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-1.27\" y1=\"0.508\" x2=\"-1.27\" y2=\"-0.508\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-1.27\" y1=\"-0.508\" x2=\"0\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-1.143\" y1=\"0\" x2=\"-2.032\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<wire x1=\"-1.143\" y1=\"-0.254\" x2=\"-0.254\" y2=\"0\" width=\"0.3048\" layer=\"94\"/>\n<wire x1=\"-0.254\" y1=\"0\" x2=\"-1.143\" y2=\"0.254\" width=\"0.3048\" layer=\"94\"/>\n<wire x1=\"-1.143\" y1=\"0.254\" x2=\"-1.143\" y2=\"0\" width=\"0.3048\" layer=\"94\"/>\n<wire x1=\"-1.143\" y1=\"0\" x2=\"-0.889\" y2=\"0\" width=\"0.3048\" layer=\"94\"/>\n<wire x1=\"-3.81\" y1=\"0\" x2=\"-5.08\" y2=\"0\" width=\"0.1524\" layer=\"94\"/>\n<circle x=\"0\" y=\"-1.905\" radius=\"0.127\" width=\"0.4064\" layer=\"94\"/>\n<circle x=\"0\" y=\"1.905\" radius=\"0.127\" width=\"0.4064\" layer=\"94\"/>\n<text x=\"5.08\" y=\"2.54\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"5.08\" y=\"0\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<text x=\"-1.27\" y=\"2.54\" size=\"0.8128\" layer=\"93\">D</text>\n<text x=\"-1.27\" y=\"-3.556\" size=\"0.8128\" layer=\"93\">S</text>\n<text x=\"-5.08\" y=\"-1.27\" size=\"0.8128\" layer=\"93\">G</text>\n<rectangle x1=\"-2.794\" y1=\"-2.54\" x2=\"-2.032\" y2=\"-1.27\" layer=\"94\"/>\n<rectangle x1=\"-2.794\" y1=\"1.27\" x2=\"-2.032\" y2=\"2.54\" layer=\"94\"/>\n<rectangle x1=\"-2.794\" y1=\"-0.889\" x2=\"-2.032\" y2=\"0.889\" layer=\"94\"/>\n<pin name=\"G\" x=\"-7.62\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\"/>\n<pin name=\"D\" x=\"0\" y=\"5.08\" visible=\"off\" length=\"short\" direction=\"pas\" rot=\"R270\"/>\n<pin name=\"S\" x=\"0\" y=\"-5.08\" visible=\"off\" length=\"short\" direction=\"pas\" rot=\"R90\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"DIODE-SCHOTTKY\" prefix=\"D\">\n<description>Schottky diodes in SFE's production catalog&lt;p&gt;\n\nBAT20J 1A 23V 0.62Vf&lt;br&gt;\nRB751 120mA 40V 0.37Vf&lt;br&gt;\nPMEG4005EJ 0.5A 40V 0.42Vf&lt;br&gt;\nMBRA140 1A 40V 0.5Vf&lt;br&gt;\nB340A  3A 40V SMA &lt;br&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"DIODE-SCHOTTKY\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"-BAT20J\" package=\"SOD-323\">\n<connects>\n<connect gate=\"G$1\" pin=\"A\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"C\" pad=\"C\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"DIO-11623\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"BAT20J\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-RB751\" package=\"SOD-523\">\n<connects>\n<connect gate=\"G$1\" pin=\"A\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"C\" pad=\"C\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"DIO-11018\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"RB751\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-MBRA140\" package=\"SMA-DIODE\">\n<connects>\n<connect gate=\"G$1\" pin=\"A\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"C\" pad=\"C\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"DIO-08053\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"MBRA140\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-PMEG4005EJ\" package=\"SOD-323\">\n<connects>\n<connect gate=\"G$1\" pin=\"A\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"C\" pad=\"C\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"DIO-10955\" constant=\"no\"/>\n<attribute name=\"VALUE\" value=\"PMEG4005EJ\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"-B340A\" package=\"SMA-DIODE\">\n<connects>\n<connect gate=\"G$1\" pin=\"A\" pad=\"A\"/>\n<connect gate=\"G$1\" pin=\"C\" pad=\"C\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"DIO-09886\"/>\n<attribute name=\"VALUE\" value=\"B340A\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n<deviceset name=\"MOSFET-PCHANNEL\" prefix=\"Q\">\n<description>Generic PMOSFET\n\n&lt;ul&gt;\n&lt;li&gt;\nIRLML2244 - TRANS-11153 \n(SOT-23 -20V -4.3A) \n(1.Gate 2.Source 3.Drain)\n&lt;/li&gt;\n&lt;li&gt;\nFQP27P06 - \n&lt;a href=\"http://www.sparkfun.com/products/10349\"&gt;COM-10349&lt;/a&gt;\n(TO-220 -60V -27A)\n(1.Gate 2.Source 3.Drain)\n&lt;/li&gt;\n&lt;/ul&gt;</description>\n<gates>\n<gate name=\"G$1\" symbol=\"MOSFET-PCHANNEL\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"SMD\" package=\"SOT23-3\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"IRLML2244\" package=\"SOT23-3\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"TRANS-11153\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"\" package=\"SOT23-3\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"TRANS-08285\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"FQP27P06\" package=\"TO220V\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n<device name=\"DMG2307L\" package=\"SOT23-3\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"TRANS-11308\"/>\n<attribute name=\"VALUE\" value=\"2.5A/30V\"/>\n</technology>\n</technologies>\n</device>\n<device name=\"NDP6020P_20V_24A_LOW_VGS_TH\" package=\"TO220V\">\n<connects>\n<connect gate=\"G$1\" pin=\"D\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"G\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"S\" pad=\"3\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"PROD_ID\" value=\"TRANS-13060\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"Eagle_FPC_CONNECTOR_AND_FFC_CAB_rev15c\">\n<description>&lt;BR&gt;Wurth Elektronik   FPC Connector and FFC Cable&lt;br&gt;&lt;Hr&gt;\n&lt;BR&gt;&lt;BR&gt; \n&lt;TABLE BORDER=0 CELLSPACING=0 CELLPADDING=0&gt;\n&lt;TR&gt;   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;&lt;br&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt; &lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------------------------&lt;BR&gt;\n&lt;B&gt;&lt;I&gt;&lt;span style='font-size:26pt;\n  color:#FF6600;'&gt;WE &lt;/span&gt;&lt;/i&gt;&lt;/b&gt;\n&lt;BR&gt;\n      ---------------------------&lt;BR&gt;&lt;b&gt;Würth Elektronik&lt;/b&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n\n  &lt;TR&gt;\n    &lt;TD COLSPAN=7&gt;&amp;nbsp;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n  \n&lt;/TABLE&gt;\n&lt;B&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;More than you expect&lt;BR&gt;&lt;BR&gt;&lt;BR&gt;&lt;/B&gt;\n\n&lt;HR&gt;&lt;BR&gt;\n&lt;b&gt;Würth Elektronik eiSos GmbH &amp; Co. KG&lt;/b&gt;&lt;br&gt;\nEMC &amp; Inductive Solutions&lt;br&gt;\n\nMax-Eyth-Str.1&lt;br&gt;\nD-74638 Waldenburg&lt;br&gt;\n&lt;br&gt;\nTel: +49 (0)7942-945-0&lt;br&gt;\nFax:+49 (0)7942-945-405&lt;br&gt;\n&lt;br&gt;\n&lt;a href=\"http://www.we-online.com/eagle\"&gt;http://www.we-online.com/eagle&lt;/a&gt;&lt;br&gt;\n&lt;a href=\"mailto:libraries@we-online.com\"&gt;libraries@we-online.com&lt;/a&gt; &lt;BR&gt;&lt;BR&gt;\n&lt;br&gt;&lt;HR&gt;&lt;BR&gt;\nNeither CadSoft nor WE-eiSos does warrant that this library is error-free or &lt;br&gt;\nthat it meets your specific requirements.&lt;br&gt;&lt;BR&gt;\nPlease contact us for more information.&lt;br&gt;&lt;BR&gt;&lt;br&gt;\n&lt;hr&gt;\nEagle Version 6, Library Revision 2015b, 08.04.2015&lt;br&gt;\n&lt;HR&gt;\nCopyright: Würth Elektronik</description>\n<packages>\n<package name=\"68711014522\">\n<description>&lt;b&gt;WR-FPC 0.5mm SMT ZIF Horizontal Bottom Contact, 10 Pins</description>\n<wire x1=\"5.8\" y1=\"-4.1\" x2=\"5.8\" y2=\"1.5\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.8\" y1=\"1.5\" x2=\"-5.8\" y2=\"-4.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"5.8\" y1=\"1.5\" x2=\"-5.8\" y2=\"1.5\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.8\" y1=\"-4.1\" x2=\"5.8\" y2=\"-4.1\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-5.7\" y1=\"0.2\" x2=\"5.7\" y2=\"0.2\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-5.7\" y1=\"-4.1\" x2=\"5.7\" y2=\"-4.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"5.7\" y1=\"0.2\" x2=\"5.7\" y2=\"-4.1\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-5.7\" y1=\"-4.1\" x2=\"-5.7\" y2=\"0.2\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"Z2\" x=\"4.18\" y=\"-1.38\" dx=\"2.7\" dy=\"3\" layer=\"1\"/>\n<smd name=\"Z1\" x=\"-4.18\" y=\"-1.38\" dx=\"2.7\" dy=\"3\" layer=\"1\"/>\n<smd name=\"1\" x=\"-2.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"2\" x=\"-1.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"3\" x=\"-1.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"4\" x=\"-0.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"5\" x=\"-0.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"6\" x=\"0.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"7\" x=\"0.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"8\" x=\"1.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"9\" x=\"1.75\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<smd name=\"10\" x=\"2.25\" y=\"0.6\" dx=\"0.3\" dy=\"1.2\" layer=\"1\"/>\n<text x=\"-2.944\" y=\"2.1101\" size=\"1.27\" layer=\"25\">&gt;NAME</text>\n<text x=\"-2.8\" y=\"-1.5\" size=\"1.27\" layer=\"51\">1</text>\n<text x=\"-3.329\" y=\"-5.7066\" size=\"1.27\" layer=\"27\">&gt;VALUE</text>\n</package>\n</packages>\n<symbols>\n<symbol name=\"10\">\n<wire x1=\"-1.651\" y1=\"13.589\" x2=\"-1.651\" y2=\"11.811\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"11.049\" x2=\"-1.651\" y2=\"9.271\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"8.509\" x2=\"-1.651\" y2=\"6.731\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"5.969\" x2=\"-1.651\" y2=\"4.191\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"3.429\" x2=\"-1.651\" y2=\"1.651\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"0.889\" x2=\"-1.651\" y2=\"-0.889\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"-1.651\" x2=\"-1.651\" y2=\"-3.429\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"-4.191\" x2=\"-1.651\" y2=\"-5.969\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"-6.731\" x2=\"-1.651\" y2=\"-8.509\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<wire x1=\"-1.651\" y1=\"-9.271\" x2=\"-1.651\" y2=\"-11.049\" width=\"0.254\" layer=\"94\" curve=\"180\" cap=\"flat\"/>\n<text x=\"3.81\" y=\"0.238\" size=\"1.778\" layer=\"95\">&gt;NAME</text>\n<text x=\"3.81\" y=\"-2.54\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"1\" x=\"-5.08\" y=\"12.7\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"2\" x=\"-5.08\" y=\"10.16\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"3\" x=\"-5.08\" y=\"7.62\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"4\" x=\"-5.08\" y=\"5.08\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"5\" x=\"-5.08\" y=\"2.54\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"6\" x=\"-5.08\" y=\"0\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"7\" x=\"-5.08\" y=\"-2.54\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"8\" x=\"-5.08\" y=\"-5.08\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"9\" x=\"-5.08\" y=\"-7.62\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n<pin name=\"10\" x=\"-5.08\" y=\"-10.16\" visible=\"pad\" length=\"short\" direction=\"pas\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"68711014522\" prefix=\"K\">\n<description>&lt;b&gt;WR-FPC 0.5mm SMT ZIF Horizontal Bottom Contact, 10 Pins&lt;/b&gt;=&gt;Code : Con_FPC_ZIF_0.50_68711014522\n&lt;br&gt;&lt;a href=\"http://katalog.we-online.de/media/images/eican/Con_FPC_ZIF_0.50_6871xx14522_pf2.jpg\" title=\"Enlarge picture\"&gt;\n&lt;img src=\"http://katalog.we-online.de/media/thumbs2/eican/thb_Con_FPC_ZIF_0.50_6871xx14522_pf2.jpg\" width=\"320\"&gt;&lt;/a&gt;&lt;p&gt;\nDetails see: &lt;a href=\"http://katalog.we-online.de/en/em/687_1xx_145_22\"&gt;http://katalog.we-online.de/en/em/687_1xx_145_22&lt;/a&gt;&lt;p&gt;\nCreated 2014-07-09, Karrer Zheng&lt;br&gt;\n2014 (C) Würth Elektronik</description>\n<gates>\n<gate name=\"G$1\" symbol=\"10\" x=\"-2.54\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"68711014522\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"10\" pad=\"10\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n<connect gate=\"G$1\" pin=\"3\" pad=\"3\"/>\n<connect gate=\"G$1\" pin=\"4\" pad=\"4\"/>\n<connect gate=\"G$1\" pin=\"5\" pad=\"5\"/>\n<connect gate=\"G$1\" pin=\"6\" pad=\"6\"/>\n<connect gate=\"G$1\" pin=\"7\" pad=\"7\"/>\n<connect gate=\"G$1\" pin=\"8\" pad=\"8\"/>\n<connect gate=\"G$1\" pin=\"9\" pad=\"9\"/>\n</connects>\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"supply1\">\n<description>&lt;b&gt;Supply Symbols&lt;/b&gt;&lt;p&gt;\n GND, VCC, 0V, +5V, -5V, etc.&lt;p&gt;\n Please keep in mind, that these devices are necessary for the\n automatic wiring of the supply signals.&lt;p&gt;\n The pin name defined in the symbol is identical to the net which is to be wired automatically.&lt;p&gt;\n In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.&lt;p&gt;\n &lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>\n<packages>\n</packages>\n<symbols>\n<symbol name=\"GND\">\n<wire x1=\"-1.905\" y1=\"0\" x2=\"1.905\" y2=\"0\" width=\"0.254\" layer=\"94\"/>\n<text x=\"-2.54\" y=\"-2.54\" size=\"1.778\" layer=\"96\">&gt;VALUE</text>\n<pin name=\"GND\" x=\"0\" y=\"2.54\" visible=\"off\" length=\"short\" direction=\"sup\" rot=\"R270\"/>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"GND\" prefix=\"GND\">\n<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>\n<gates>\n<gate name=\"1\" symbol=\"GND\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\">\n<technologies>\n<technology name=\"\"/>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"Microchip_By_element14_Batch_1\">\n<description>Developed by element14 :&lt;br&gt;\nelement14 CAD Library consolidation.ulp\nat 30/07/2012 11:22:31</description>\n<packages>\n<package name=\"SOT95P270X145-6N\">\n<smd name=\"1\" x=\"-1.2954\" y=\"0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"2\" x=\"-1.2954\" y=\"0\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"3\" x=\"-1.2954\" y=\"-0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"4\" x=\"1.2954\" y=\"-0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"5\" x=\"1.2954\" y=\"0\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<smd name=\"6\" x=\"1.2954\" y=\"0.9398\" dx=\"1.3208\" dy=\"0.5588\" layer=\"1\"/>\n<wire x1=\"-0.889\" y1=\"0.6858\" x2=\"-0.889\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"1.1938\" x2=\"-1.6002\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"1.1938\" x2=\"-1.6002\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"0.6858\" x2=\"-0.889\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-0.254\" x2=\"-0.889\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"0.254\" x2=\"-1.6002\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"0.254\" x2=\"-1.6002\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-0.254\" x2=\"-0.889\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-1.1938\" x2=\"-0.889\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-0.6858\" x2=\"-1.6002\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-0.6858\" x2=\"-1.6002\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-1.6002\" y1=\"-1.1938\" x2=\"-0.889\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-0.6858\" x2=\"0.889\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-1.1938\" x2=\"1.6002\" y2=\"-1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-1.1938\" x2=\"1.6002\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-0.6858\" x2=\"0.889\" y2=\"-0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"0.254\" x2=\"0.889\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-0.254\" x2=\"1.6002\" y2=\"-0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"-0.254\" x2=\"1.6002\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"0.254\" x2=\"0.889\" y2=\"0.254\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"1.1938\" x2=\"0.889\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"0.6858\" x2=\"1.6002\" y2=\"0.6858\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"0.6858\" x2=\"1.6002\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"1.6002\" y1=\"1.1938\" x2=\"0.889\" y2=\"1.1938\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"-1.5494\" x2=\"0.889\" y2=\"-1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"-1.5494\" x2=\"0.889\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.889\" y1=\"1.5494\" x2=\"0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.3048\" y1=\"1.5494\" x2=\"-0.889\" y2=\"1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"-0.889\" y1=\"1.5494\" x2=\"-0.889\" y2=\"-1.5494\" width=\"0.1524\" layer=\"51\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0\" layer=\"51\" curve=\"-180\"/>\n<text x=\"-2.1336\" y=\"1.3716\" size=\"1.27\" layer=\"51\" ratio=\"6\" rot=\"SR0\">*</text>\n<wire x1=\"-0.5588\" y1=\"-1.5494\" x2=\"0.5588\" y2=\"-1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.5588\" y1=\"1.5494\" x2=\"0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"-0.3048\" y1=\"1.5494\" x2=\"-0.5588\" y2=\"1.5494\" width=\"0.1524\" layer=\"21\"/>\n<wire x1=\"0.3048\" y1=\"1.5494\" x2=\"-0.3048\" y2=\"1.5494\" width=\"0\" layer=\"21\" curve=\"-180\"/>\n<text x=\"-2.1336\" y=\"1.3716\" size=\"1.27\" layer=\"21\" ratio=\"6\" rot=\"SR0\">*</text>\n<text x=\"-4.699\" y=\"2.032\" size=\"2.0828\" layer=\"25\" ratio=\"10\" rot=\"SR0\">&gt;NAME</text>\n<text x=\"-5.5372\" y=\"-4.0386\" size=\"2.0828\" layer=\"27\" ratio=\"10\" rot=\"SR0\">&gt;VALUE</text>\n</package>\n</packages>\n<symbols>\n<symbol name=\"MCP1640CT-I/CHY\">\n<pin name=\"VIN\" x=\"-17.78\" y=\"5.08\" length=\"middle\" direction=\"in\"/>\n<pin name=\"SW\" x=\"-17.78\" y=\"0\" length=\"middle\" direction=\"in\"/>\n<pin name=\"EN\" x=\"-17.78\" y=\"-2.54\" length=\"middle\" direction=\"in\"/>\n<pin name=\"VFB\" x=\"-17.78\" y=\"-5.08\" length=\"middle\" direction=\"in\"/>\n<pin name=\"GND\" x=\"-17.78\" y=\"-10.16\" length=\"middle\" direction=\"pas\"/>\n<pin name=\"VOUT\" x=\"17.78\" y=\"5.08\" length=\"middle\" direction=\"out\" rot=\"R180\"/>\n<wire x1=\"-13.208\" y1=\"5.08\" x2=\"-14.2748\" y2=\"5.588\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-13.208\" y1=\"5.08\" x2=\"-14.2748\" y2=\"4.572\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-13.208\" y1=\"0\" x2=\"-14.2748\" y2=\"0.508\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-13.208\" y1=\"0\" x2=\"-14.2748\" y2=\"-0.508\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-13.208\" y1=\"-2.54\" x2=\"-14.2748\" y2=\"-2.032\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-13.208\" y1=\"-2.54\" x2=\"-14.2748\" y2=\"-3.048\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"13.208\" y1=\"5.588\" x2=\"14.2748\" y2=\"5.08\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"13.208\" y1=\"4.572\" x2=\"14.2748\" y2=\"5.08\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-12.7\" y1=\"10.16\" x2=\"-12.7\" y2=\"-15.24\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"-12.7\" y1=\"-15.24\" x2=\"12.7\" y2=\"-15.24\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"12.7\" y1=\"-15.24\" x2=\"12.7\" y2=\"10.16\" width=\"0.4064\" layer=\"94\"/>\n<wire x1=\"12.7\" y1=\"10.16\" x2=\"-12.7\" y2=\"10.16\" width=\"0.4064\" layer=\"94\"/>\n<text x=\"-4.9276\" y=\"12.573\" size=\"2.0828\" layer=\"95\" ratio=\"10\" rot=\"SR0\">&gt;NAME</text>\n<text x=\"-5.1054\" y=\"-19.9136\" size=\"2.0828\" layer=\"96\" ratio=\"10\" rot=\"SR0\">&gt;VALUE</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"MCP1640CT-I/CHY\">\n<description>Synchronous Boost Regulator</description>\n<gates>\n<gate name=\"A\" symbol=\"MCP1640CT-I/CHY\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"SOT95P270X145-6N\">\n<connects>\n<connect gate=\"A\" pin=\"EN\" pad=\"3\"/>\n<connect gate=\"A\" pin=\"GND\" pad=\"2\"/>\n<connect gate=\"A\" pin=\"SW\" pad=\"1\"/>\n<connect gate=\"A\" pin=\"VFB\" pad=\"4\"/>\n<connect gate=\"A\" pin=\"VIN\" pad=\"6\"/>\n<connect gate=\"A\" pin=\"VOUT\" pad=\"5\"/>\n</connects>\n<technologies>\n<technology name=\"\">\n<attribute name=\"MPN\" value=\"MCP1640CT-I/CHY\" constant=\"no\"/>\n<attribute name=\"OC_FARNELL\" value=\"1800208\" constant=\"no\"/>\n<attribute name=\"OC_NEWARK\" value=\"73R3626\" constant=\"no\"/>\n<attribute name=\"PACKAGE\" value=\"SOT-6\" constant=\"no\"/>\n<attribute name=\"SUPPLIER\" value=\"Microchip\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n<library name=\"EMCComponents (rev19e)\">\n<description>&lt;BR&gt;Wurth Elektronik - EMC Components, Power Magnetics, Signal &amp; Communications&lt;br&gt;&lt;Hr&gt;\n&lt;BR&gt;&lt;BR&gt; \n&lt;TABLE BORDER=0 CELLSPACING=0 CELLPADDING=0&gt;\n&lt;TR&gt;   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;&lt;br&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;\n      -----&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt; &lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------------------------&lt;BR&gt;\n&lt;B&gt;&lt;I&gt;&lt;span style='font-size:26pt;\n  color:#FF6600;'&gt;WE &lt;/span&gt;&lt;/i&gt;&lt;/b&gt;\n&lt;BR&gt;\n      ---------------------------&lt;BR&gt;&lt;b&gt;Würth Elektronik&lt;/b&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n    &lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;br&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;\n      ----O--------&lt;BR&gt;\n      ---------O---&lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n   \n&lt;TD BGCOLOR=\"#cccccc\" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;&lt;BR&gt;\n      &amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp; &amp;nbsp;&lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;\n       &lt;BR&gt;&lt;BR&gt;&lt;/FONT&gt;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n\n  &lt;TR&gt;\n    &lt;TD COLSPAN=7&gt;&amp;nbsp;\n    &lt;/TD&gt;\n  &lt;/TR&gt;\n  \n&lt;/TABLE&gt;\n&lt;B&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;More than you expect&lt;BR&gt;&lt;BR&gt;&lt;BR&gt;&lt;/B&gt;\n\n&lt;HR&gt;&lt;BR&gt;\n&lt;b&gt;Würth Elektronik eiSos GmbH &amp; Co. KG&lt;/b&gt;&lt;br&gt;\nEMC &amp; Inductive Solutions&lt;br&gt;\n\nMax-Eyth-Str.1&lt;br&gt;\nD-74638 Waldenburg&lt;br&gt;\n&lt;br&gt;\nTel: +49 (0)7942-945-0&lt;br&gt;\nFax:+49 (0)7942-945-5000&lt;br&gt;\n&lt;br&gt;\n&lt;a href=\"http://www.we-online.com/web/en/electronic_components/produkte_pb/bauteilebibliotheken/eagle_4.php\"&gt;www.we-online.com/eagle&lt;/a&gt;&lt;br&gt;\n&lt;a href=\"mailto:libraries@we-online.com\"&gt;libraries@we-online.com&lt;/a&gt; &lt;BR&gt;&lt;BR&gt;\n&lt;br&gt;&lt;HR&gt;&lt;BR&gt;\nNeither Autodesk nor Würth Elektronik eiSos does warrant that this library is error-free or &lt;br&gt;\nthat it meets your specific requirements.&lt;br&gt;&lt;BR&gt;\nPlease contact us for more information.&lt;br&gt;&lt;BR&gt;&lt;br&gt;\n\n&lt;HR&gt;\nEagle Version 6, Library Revision 2019e, 2019-06-27&lt;br&gt;\n\n&lt;HR&gt;\nCopyright: Würth Elektronik</description>\n<packages>\n<package name=\"WE-TPC_2811/2813_OLD\">\n<wire x1=\"-1.4\" y1=\"1.4\" x2=\"1.4\" y2=\"1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.4\" y1=\"1.4\" x2=\"1.4\" y2=\"-1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"1.4\" y1=\"-1.4\" x2=\"-1.4\" y2=\"-1.4\" width=\"0.127\" layer=\"51\"/>\n<wire x1=\"-1.4\" y1=\"-1.4\" x2=\"-1.4\" y2=\"1.4\" width=\"0.127\" layer=\"51\"/>\n<smd name=\"1\" x=\"-1.1\" y=\"0\" dx=\"3.2\" dy=\"1\" layer=\"1\" rot=\"R90\"/>\n<smd name=\"2\" x=\"1.1\" y=\"0\" dx=\"3.2\" dy=\"1\" layer=\"1\" rot=\"R90\"/>\n<text x=\"-1.56\" y=\"2.18\" size=\"0.6096\" layer=\"27\">&gt;VALUE</text>\n<text x=\"-0.21\" y=\"-2.6\" size=\"0.6096\" layer=\"25\" align=\"bottom-center\">&gt;NAME</text>\n<wire x1=\"-0.4\" y1=\"1.4\" x2=\"0.4\" y2=\"1.4\" width=\"0.127\" layer=\"21\"/>\n<wire x1=\"-0.4\" y1=\"-1.4\" x2=\"0.4\" y2=\"-1.4\" width=\"0.127\" layer=\"21\"/>\n<polygon width=\"0.127\" layer=\"39\">\n<vertex x=\"-1.8\" y=\"1.8\"/>\n<vertex x=\"1.8\" y=\"1.8\"/>\n<vertex x=\"1.8\" y=\"-1.8\"/>\n<vertex x=\"-1.8\" y=\"-1.8\"/>\n</polygon>\n</package>\n</packages>\n<symbols>\n<symbol name=\"L\">\n<wire x1=\"-5.08\" y1=\"0\" x2=\"-2.54\" y2=\"0\" width=\"0.254\" layer=\"94\" curve=\"-180\"/>\n<wire x1=\"-2.54\" y1=\"0\" x2=\"0\" y2=\"0\" width=\"0.254\" layer=\"94\" curve=\"-180\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"2.54\" y2=\"0\" width=\"0.254\" layer=\"94\" curve=\"-180\"/>\n<wire x1=\"2.54\" y1=\"0\" x2=\"5.08\" y2=\"0\" width=\"0.254\" layer=\"94\" curve=\"-180\"/>\n<pin name=\"1\" x=\"-7.62\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\"/>\n<pin name=\"2\" x=\"7.62\" y=\"0\" visible=\"off\" length=\"short\" direction=\"pas\" rot=\"R180\"/>\n<text x=\"-2.54\" y=\"5.08\" size=\"1.27\" layer=\"95\">&gt;Name</text>\n<text x=\"-2.54\" y=\"-2.54\" size=\"1.27\" layer=\"96\">&gt;Value</text>\n</symbol>\n</symbols>\n<devicesets>\n<deviceset name=\"WE-TPC_2813\" prefix=\"L\" uservalue=\"yes\">\n<description>&lt;b&gt;SMD Shielded Tiny Power Inductor\n&lt;br&gt;\n&lt;br&gt;\n&lt;br&gt;&lt;b&gt; Characteristics\n&lt;br&gt;\n&lt;br&gt;&lt;/b&gt;&lt;/b&gt; Extremely flat power inductor\n&lt;br&gt;\n&lt;br&gt; High current capability\n&lt;br&gt;\n&lt;br&gt; Magnetically shielded which results in a low leakage field\n&lt;br&gt;\n&lt;brr&gt; Operating temperature: –40 °C to +125 °C\n&lt;br&gt;\n&lt;br&gt;\n&lt;br&gt;&lt;b&gt; Applications\n&lt;br&gt;\n&lt;br&gt;&lt;/b&gt; Portable power like PDA, digital camera, PCMCIA cards and displays\n&lt;br&gt;\n&lt;br&gt; DC/DC converter\n&lt;br&gt;\n&lt;br&gt; Embedded PC\n&lt;br&gt;\n&lt;br&gt; Mobile data gathering, telemetric\n&lt;br&gt;\n&lt;br&gt;\n&lt;br&gt;\n&lt;br&gt;&lt;a href=\"http://katalog.we-online.de/media/images/v2/WE-TPC_Gruppe_2.jpg\" title=\"Enlarge picture\"&gt;\n&lt;img src=\"http://katalog.we-online.de/media/images/v2/WE-TPC_Gruppe_2.jpg\" width=\"320\"&gt;&lt;/a&gt;&lt;p&gt;\nDetails see: &lt;a href=\"http://katalog.we-online.de/en/pbs/WE-TPC?\"&gt;http://katalog.we-online.de/en/pbs/WE-TPC?&lt;/a&gt;&lt;p&gt;\n\n&lt;/b&gt;Updated  by  Dan Xu 2014-07-11&lt;br&gt;\n&lt;/b&gt;2014 (C) Wurth Elektronik</description>\n<gates>\n<gate name=\"G$1\" symbol=\"L\" x=\"0\" y=\"0\"/>\n</gates>\n<devices>\n<device name=\"\" package=\"WE-TPC_2811/2813_OLD\">\n<connects>\n<connect gate=\"G$1\" pin=\"1\" pad=\"1\"/>\n<connect gate=\"G$1\" pin=\"2\" pad=\"2\"/>\n</connects>\n<technologies>\n<technology name=\"_744029000068\">\n<attribute name=\"WE-NUMBER\" value=\"744029000068/0,068uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_74402900016\">\n<attribute name=\"WE-NUMBER\" value=\"744029000016/0,16uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_74402900033\">\n<attribute name=\"WE-NUMBER\" value=\"74402900033/0,33uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_74402900047\">\n<attribute name=\"WE-NUMBER\" value=\"74402900047/0,47uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_74402900082\">\n<attribute name=\"WE-NUMBER\" value=\"74402900082/0,82uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029001\">\n<attribute name=\"WE-NUMBER\" value=\"744029001/1uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029002\">\n<attribute name=\"WE-NUMBER\" value=\"744029002/2,2uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029003\">\n<attribute name=\"WE-NUMBER\" value=\"744029003/3,3uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029004\">\n<attribute name=\"WE-NUMBER\" value=\"744029004/4,7uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029006\">\n<attribute name=\"WE-NUMBER\" value=\"744029006/6,8uH\" constant=\"no\"/>\n</technology>\n<technology name=\"_744029100\">\n<attribute name=\"WE-NUMBER\" value=\"744029100/10uH\" constant=\"no\"/>\n</technology>\n</technologies>\n</device>\n</devices>\n</deviceset>\n</devicesets>\n</library>\n</libraries>\n<attributes>\n</attributes>\n<variantdefs>\n</variantdefs>\n<classes>\n<class number=\"0\" name=\"default\" width=\"0\" drill=\"0\">\n</class>\n</classes>\n<parts>\n<part name=\"S1\" library=\"SparkFun-Electromechanical\" deviceset=\"JOYSTICK_MINI\" device=\"\" value=\"5-WAY-TACTILE-SWITCH\"/>\n<part name=\"SW1\" library=\"microbuilder\" deviceset=\"SWITCH_TACT_SMT\" device=\"_EVQQ2_SMALL\" value=\"EVQQ\"/>\n<part name=\"SW2\" library=\"microbuilder\" deviceset=\"SWITCH_TACT_SMT\" device=\"_EVQQ2_SMALL\" value=\"EVQQ\"/>\n<part name=\"U2\" library=\"SparkFun-RF\" deviceset=\"ESP-WROOM-32\" device=\"\" value=\"ESP-WROOM-32\"/>\n<part name=\"R8\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"C5\" library=\"SparkFun-Capacitors\" deviceset=\"10UF\" device=\"-0603-6.3V-20%\" value=\"10uF\"/>\n<part name=\"C3\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"C2\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"GND5\" library=\"SparkFun-PowerSymbols\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND6\" library=\"SparkFun-PowerSymbols\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND7\" library=\"SparkFun-PowerSymbols\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND8\" library=\"SparkFun-PowerSymbols\" deviceset=\"GND\" device=\"\"/>\n<part name=\"SUPPLY2\" library=\"SparkFun-PowerSymbols\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"SUPPLY3\" library=\"SparkFun-PowerSymbols\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"SUPPLY5\" library=\"SparkFun-PowerSymbols\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"R17\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"R18\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"Q2\" library=\"esp32-thing-temp\" deviceset=\"MBT3904DW1T1\" device=\"\" value=\"MBT3904DW1T1\"/>\n<part name=\"U1\" library=\"SparkFun-PowerIC\" deviceset=\"MCP73831\" device=\"\"/>\n<part name=\"C6\" library=\"SparkFun-Capacitors\" deviceset=\"4.7UF\" device=\"0603\" value=\"4.7uF\"/>\n<part name=\"JP2\" library=\"SparkFun-Connectors\" deviceset=\"M02\" device=\"JST-PTH-2\" value=\"LiPo\"/>\n<part name=\"R6\" library=\"SparkFun-Resistors\" deviceset=\"2.0KOHM1/10W5%(0603)\" device=\"\" value=\"3.9k\"/>\n<part name=\"SUPPLY25\" library=\"SparkFun-Aesthetics\" deviceset=\"V_BATT\" device=\"\"/>\n<part name=\"C19\" library=\"SparkFun-Capacitors\" deviceset=\"4.7UF\" device=\"0603\" value=\"4.7uF\"/>\n<part name=\"SUPPLY23\" library=\"SparkFun-Aesthetics\" deviceset=\"V_USB\" device=\"\"/>\n<part name=\"GND41\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"C11\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"GND27\" library=\"SparkFun\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND26\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"C14\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"U4\" library=\"SparkFun-DigitalIC\" deviceset=\"FT231X\" device=\"S\" value=\"FT231XS\"/>\n<part name=\"R13\" library=\"SparkFun-Resistors\" deviceset=\"27OHM1/10W1%(0603)\" device=\"0603-RES\" value=\"27\"/>\n<part name=\"R14\" library=\"SparkFun-Resistors\" deviceset=\"27OHM1/10W1%(0603)\" device=\"0603-RES\" value=\"27\"/>\n<part name=\"C13\" library=\"SparkFun-Capacitors\" deviceset=\"47PF\" device=\"-0603-50V-5%\" value=\"47pF\"/>\n<part name=\"C12\" library=\"SparkFun-Capacitors\" deviceset=\"47PF\" device=\"-0603-50V-5%\" value=\"47pF\"/>\n<part name=\"GND29\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND28\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"C16\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"GND33\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND32\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND31\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND30\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"F1\" library=\"SparkFun-PowerIC\" deviceset=\"PTC\" device=\"SMD\" value=\"500mA\"/>\n<part name=\"JP15\" library=\"SparkFun-Connectors\" deviceset=\"USB_MICROB_PLUG\" device=\"CONN-11752\"/>\n<part name=\"C15\" library=\"SparkFun-Capacitors\" deviceset=\"4.7UF-6.3V-10%(0603)\" device=\"0603\" value=\"4.7uF\"/>\n<part name=\"SUPPLY14\" library=\"SparkFun-Aesthetics\" deviceset=\"V_USB\" device=\"\"/>\n<part name=\"GND2\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"C7\" library=\"SparkFun-Capacitors\" deviceset=\"1.0UF\" device=\"-0805-25V-(+80/-20%)\" value=\"1.0uF\"/>\n<part name=\"GND21\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND3\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"D3\" library=\"SparkFun-DiscreteSemi\" deviceset=\"DIODE-SCHOTTKY\" device=\"-BAT20J\" value=\"BAT20J\"/>\n<part name=\"R7\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"GND13\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"Q1\" library=\"SparkFun-DiscreteSemi\" deviceset=\"MOSFET-PCHANNEL\" device=\"DMG2307L\" value=\"2.5A/30V\"/>\n<part name=\"SUPPLY22\" library=\"SparkFun-Aesthetics\" deviceset=\"V_USB\" device=\"\"/>\n<part name=\"SUPPLY27\" library=\"SparkFun-Aesthetics\" deviceset=\"V_BATT\" device=\"\"/>\n<part name=\"SUPPLY8\" library=\"SparkFun-Aesthetics\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"R10\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"470k\"/>\n<part name=\"R11\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"470k\"/>\n<part name=\"GND16\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"S2\" library=\"SparkFun-Electromechanical\" deviceset=\"SWITCH-SPDT\" device=\"-SMD-A\"/>\n<part name=\"K1\" library=\"Eagle_FPC_CONNECTOR_AND_FFC_CAB_rev15c\" deviceset=\"68711014522\" device=\"\"/>\n<part name=\"GND10\" library=\"supply1\" deviceset=\"GND\" device=\"\"/>\n<part name=\"R1\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"0\"/>\n<part name=\"R3\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"0\"/>\n<part name=\"C1\" library=\"SparkFun-Capacitors\" deviceset=\"47PF\" device=\"-0603-50V-5%\" value=\"4.7uF\"/>\n<part name=\"C8\" library=\"SparkFun-Capacitors\" deviceset=\"47PF\" device=\"-0603-50V-5%\" value=\"10uF\"/>\n<part name=\"GND1\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND14\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"C4\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"C10\" library=\"SparkFun-Capacitors\" deviceset=\"1.0UF\" device=\"-0805-25V-(+80/-20%)\" value=\"2.2uF\"/>\n<part name=\"U3\" library=\"SparkFun-PowerIC\" deviceset=\"V_REG_LDO\" device=\"SMD\" value=\"AP2112K-3.3V\">\n<attribute name=\"PROD_ID\" value=\"VREG-12457\"/>\n</part>\n<part name=\"R2\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"R4\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"10k\"/>\n<part name=\"SUPPLY4\" library=\"SparkFun-Aesthetics\" deviceset=\"3.3V\" device=\"\"/>\n<part name=\"C9\" library=\"SparkFun-Capacitors\" deviceset=\"0.1UF\" device=\"-0603-25V-(+80/-20%)\" value=\"0.1uF\"/>\n<part name=\"U$1\" library=\"Microchip_By_element14_Batch_1\" deviceset=\"MCP1640CT-I/CHY\" device=\"\"/>\n<part name=\"L1\" library=\"EMCComponents (rev19e)\" deviceset=\"WE-TPC_2813\" device=\"\" technology=\"_744029004\" value=\"4.7µH\"/>\n<part name=\"R5\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"976k\"/>\n<part name=\"R9\" library=\"SparkFun-Resistors\" deviceset=\"10KOHM\" device=\"-0603-1/10W-1%\" value=\"309k\"/>\n<part name=\"GND15\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND17\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n<part name=\"GND4\" library=\"SparkFun-Aesthetics\" deviceset=\"GND\" device=\"\"/>\n</parts>\n<sheets>\n<sheet>\n<plain>\n<text x=\"139.7\" y=\"226.06\" size=\"2.54\" layer=\"94\" align=\"top-left\">ESP32 Wroom</text>\n<text x=\"261.62\" y=\"198.12\" size=\"1.905\" layer=\"97\" font=\"vector\">Boot Mode Configuration\nPin        Default     Boot   Download\nGPIO0        1         1       0\nU0TXD        1         1       x\nGPIO2        0         x       0\nGPIO4        0         x       x\nMTDO         1         x       x\nGPIO5        1         1       x\nIf U0TXD, GPIO2, GPIO5 are floating, \nGPIO0 determines boot mode</text>\n<text x=\"233.68\" y=\"149.86\" size=\"1.778\" layer=\"97\" font=\"vector\">If DTR is LOW, toggling RTS from HIGH to LOW resets to run mode.\nIf RTS is HIGH, toggling DTR from LOW to HIGH resets to bootloader.</text>\n<text x=\"233.68\" y=\"63.5\" size=\"2.032\" layer=\"97\">Charge current:\nI_CHG = 1000 / R_PROG\n1000 / 4kOhm = 256mA</text>\n<text x=\"10.16\" y=\"149.86\" size=\"2.54\" layer=\"94\" align=\"top-left\">Power Supply</text>\n<text x=\"5.08\" y=\"223.52\" size=\"2.54\" layer=\"94\" align=\"top-left\">FTDI Adapter</text>\n<wire x1=\"228.6\" y1=\"53.34\" x2=\"292.1\" y2=\"53.34\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"292.1\" y1=\"53.34\" x2=\"292.1\" y2=\"0\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"292.1\" y1=\"0\" x2=\"228.6\" y2=\"0\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"228.6\" y1=\"0\" x2=\"228.6\" y2=\"53.34\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"228.6\" y1=\"147.32\" x2=\"228.6\" y2=\"231.14\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"228.6\" y1=\"231.14\" x2=\"347.98\" y2=\"231.14\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"347.98\" y1=\"147.32\" x2=\"228.6\" y2=\"147.32\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"347.98\" y1=\"147.32\" x2=\"347.98\" y2=\"231.14\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"228.6\" y1=\"142.24\" x2=\"347.98\" y2=\"142.24\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"228.6\" y1=\"58.42\" x2=\"228.6\" y2=\"142.24\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"347.98\" y1=\"58.42\" x2=\"347.98\" y2=\"142.24\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"228.6\" y1=\"58.42\" x2=\"347.98\" y2=\"58.42\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"154.94\" x2=\"132.08\" y2=\"154.94\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"78.74\" x2=\"0\" y2=\"154.94\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"78.74\" x2=\"132.08\" y2=\"78.74\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"132.08\" y1=\"78.74\" x2=\"132.08\" y2=\"154.94\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"132.08\" y1=\"160.02\" x2=\"132.08\" y2=\"231.14\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"231.14\" x2=\"132.08\" y2=\"231.14\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"160.02\" x2=\"132.08\" y2=\"160.02\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"160.02\" x2=\"0\" y2=\"231.14\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"137.16\" y1=\"86.36\" x2=\"137.16\" y2=\"231.14\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"137.16\" y1=\"231.14\" x2=\"223.52\" y2=\"231.14\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"137.16\" y1=\"86.36\" x2=\"223.52\" y2=\"86.36\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"223.52\" y1=\"86.36\" x2=\"223.52\" y2=\"231.14\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"0\" y2=\"73.66\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"0\" x2=\"132.08\" y2=\"0\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"0\" y1=\"73.66\" x2=\"132.08\" y2=\"73.66\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"132.08\" y1=\"0\" x2=\"132.08\" y2=\"73.66\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"137.16\" y1=\"0\" x2=\"137.16\" y2=\"81.28\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"137.16\" y1=\"81.28\" x2=\"223.52\" y2=\"81.28\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"137.16\" y1=\"0\" x2=\"223.52\" y2=\"0\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<wire x1=\"223.52\" y1=\"0\" x2=\"223.52\" y2=\"81.28\" width=\"0.1524\" layer=\"150\" style=\"shortdash\"/>\n<text x=\"233.68\" y=\"137.16\" size=\"2.54\" layer=\"94\" align=\"top-left\">LiPo Charger</text>\n<text x=\"142.24\" y=\"76.2\" size=\"2.54\" layer=\"94\" align=\"top-left\">Joystick and Buttons</text>\n<text x=\"5.08\" y=\"68.58\" size=\"2.54\" layer=\"94\" align=\"top-left\">5V Charge Pump for LCD</text>\n<text x=\"142.24\" y=\"88.9\" size=\"1.905\" layer=\"97\" font=\"vector\">RTC GPIOs: 0,2,4,12-15,25-27,32-39\nusable by ULP, internal Pullups /Pulldowns\next0 for one pin as wakeup source\next1 for multiple pins as wakeup source\n        only for GPIOs: 32-39?\n        no internal Pullups /Pulldowns\n</text>\n<text x=\"164.084\" y=\"165.354\" size=\"1.905\" layer=\"97\" font=\"vector\" rot=\"R90\">SPI Flash</text>\n<text x=\"312.42\" y=\"25.4\" size=\"2.032\" layer=\"97\" rot=\"R180\" align=\"top-right\">Maximilian Kern\n09/2019</text>\n<text x=\"297.18\" y=\"63.5\" size=\"2.032\" layer=\"97\">                          STAT\nShutdown              - High Z \nNo Battery Present  - High Z \nConstant Voltage    - Low\nCharge Complete    - High</text>\n<text x=\"124.46\" y=\"149.86\" size=\"2.032\" layer=\"97\" rot=\"R180\">ADC_BAT for voltage sensing and as a \nwakeup source (R11 acts as pulldown)</text>\n<text x=\"50.8\" y=\"10.16\" size=\"2.032\" layer=\"97\">R_top = R_bot*(V_out/V_fb-1)</text>\n<text x=\"233.68\" y=\"48.26\" size=\"2.54\" layer=\"94\" align=\"top-left\">Sharp Display Connector</text>\n</plain>\n<instances>\n<instance part=\"S1\" gate=\"G$1\" x=\"180.34\" y=\"63.5\"/>\n<instance part=\"SW1\" gate=\"G$1\" x=\"172.72\" y=\"40.64\"/>\n<instance part=\"SW2\" gate=\"G$1\" x=\"172.72\" y=\"25.4\"/>\n<instance part=\"U2\" gate=\"G$1\" x=\"182.88\" y=\"162.56\"/>\n<instance part=\"R8\" gate=\"G$1\" x=\"154.94\" y=\"200.66\" rot=\"R90\"/>\n<instance part=\"C5\" gate=\"G$1\" x=\"213.36\" y=\"215.9\"/>\n<instance part=\"C3\" gate=\"G$1\" x=\"203.2\" y=\"215.9\"/>\n<instance part=\"C2\" gate=\"G$1\" x=\"157.48\" y=\"185.42\"/>\n<instance part=\"GND5\" gate=\"1\" x=\"162.56\" y=\"119.38\"/>\n<instance part=\"GND6\" gate=\"1\" x=\"157.48\" y=\"177.8\"/>\n<instance part=\"GND7\" gate=\"1\" x=\"203.2\" y=\"208.28\"/>\n<instance part=\"GND8\" gate=\"1\" x=\"213.36\" y=\"208.28\"/>\n<instance part=\"SUPPLY2\" gate=\"G$1\" x=\"160.02\" y=\"210.82\"/>\n<instance part=\"SUPPLY3\" gate=\"G$1\" x=\"203.2\" y=\"223.52\"/>\n<instance part=\"SUPPLY5\" gate=\"G$1\" x=\"213.36\" y=\"223.52\"/>\n<instance part=\"R17\" gate=\"G$1\" x=\"302.26\" y=\"185.42\" rot=\"R180\"/>\n<instance part=\"R18\" gate=\"G$1\" x=\"302.26\" y=\"167.64\" rot=\"R180\"/>\n<instance part=\"Q2\" gate=\"Q1\" x=\"292.1\" y=\"185.42\" rot=\"MR0\"/>\n<instance part=\"Q2\" gate=\"Q2\" x=\"292.1\" y=\"167.64\" rot=\"R180\"/>\n<instance part=\"U1\" gate=\"G$1\" x=\"302.26\" y=\"109.22\" rot=\"MR0\"/>\n<instance part=\"C6\" gate=\"G$1\" x=\"269.24\" y=\"106.68\" rot=\"MR0\"/>\n<instance part=\"JP2\" gate=\"G$1\" x=\"236.22\" y=\"111.76\"/>\n<instance part=\"R6\" gate=\"G$1\" x=\"281.94\" y=\"101.6\" rot=\"MR90\"/>\n<instance part=\"SUPPLY25\" gate=\"G$1\" x=\"248.92\" y=\"119.38\" smashed=\"yes\">\n<attribute name=\"VALUE\" x=\"247.904\" y=\"122.936\" size=\"1.778\" layer=\"96\"/>\n</instance>\n<instance part=\"C19\" gate=\"G$1\" x=\"335.28\" y=\"104.14\"/>\n<instance part=\"SUPPLY23\" gate=\"G$1\" x=\"335.28\" y=\"114.3\" rot=\"MR0\"/>\n<instance part=\"GND41\" gate=\"1\" x=\"335.28\" y=\"88.9\" rot=\"MR0\"/>\n<instance part=\"C11\" gate=\"G$1\" x=\"38.1\" y=\"190.5\" rot=\"MR0\"/>\n<instance part=\"GND27\" gate=\"1\" x=\"38.1\" y=\"180.34\"/>\n<instance part=\"GND26\" gate=\"1\" x=\"27.94\" y=\"180.34\"/>\n<instance part=\"C14\" gate=\"G$1\" x=\"73.66\" y=\"185.42\" rot=\"MR0\"/>\n<instance part=\"U4\" gate=\"U$1\" x=\"109.22\" y=\"195.58\"/>\n<instance part=\"R13\" gate=\"G$1\" x=\"66.04\" y=\"200.66\" smashed=\"yes\">\n<attribute name=\"NAME\" x=\"61.468\" y=\"202.1586\" size=\"1.778\" layer=\"95\"/>\n<attribute name=\"VALUE\" x=\"67.818\" y=\"202.184\" size=\"1.778\" layer=\"96\"/>\n</instance>\n<instance part=\"R14\" gate=\"G$1\" x=\"66.04\" y=\"198.12\" smashed=\"yes\">\n<attribute name=\"NAME\" x=\"66.294\" y=\"196.8754\" size=\"1.778\" layer=\"95\" rot=\"R180\"/>\n<attribute name=\"VALUE\" x=\"71.12\" y=\"196.85\" size=\"1.778\" layer=\"96\" rot=\"R180\"/>\n</instance>\n<instance part=\"C13\" gate=\"G$1\" x=\"53.34\" y=\"190.5\"/>\n<instance part=\"C12\" gate=\"G$1\" x=\"48.26\" y=\"190.5\" rot=\"MR0\"/>\n<instance part=\"GND29\" gate=\"1\" x=\"53.34\" y=\"180.34\"/>\n<instance part=\"GND28\" gate=\"1\" x=\"48.26\" y=\"180.34\"/>\n<instance part=\"C16\" gate=\"G$1\" x=\"88.9\" y=\"185.42\"/>\n<instance part=\"GND33\" gate=\"1\" x=\"93.98\" y=\"172.72\"/>\n<instance part=\"GND32\" gate=\"1\" x=\"88.9\" y=\"172.72\"/>\n<instance part=\"GND31\" gate=\"1\" x=\"83.82\" y=\"172.72\"/>\n<instance part=\"GND30\" gate=\"1\" x=\"73.66\" y=\"172.72\"/>\n<instance part=\"F1\" gate=\"G$1\" x=\"45.72\" y=\"210.82\"/>\n<instance part=\"JP15\" gate=\"G$1\" x=\"17.78\" y=\"198.12\" rot=\"MR0\"/>\n<instance part=\"C15\" gate=\"G$1\" x=\"83.82\" y=\"185.42\" rot=\"MR0\"/>\n<instance part=\"SUPPLY14\" gate=\"G$1\" x=\"58.42\" y=\"213.36\"/>\n<instance part=\"GND2\" gate=\"1\" x=\"78.74\" y=\"88.9\"/>\n<instance part=\"C7\" gate=\"G$1\" x=\"73.66\" y=\"104.14\" rot=\"MR0\"/>\n<instance part=\"GND21\" gate=\"1\" x=\"111.76\" y=\"88.9\"/>\n<instance part=\"GND3\" gate=\"1\" x=\"73.66\" y=\"88.9\"/>\n<instance part=\"D3\" gate=\"G$1\" x=\"35.56\" y=\"111.76\" smashed=\"yes\">\n<attribute name=\"NAME\" x=\"37.338\" y=\"115.3414\" size=\"1.778\" layer=\"95\" rot=\"R180\"/>\n<attribute name=\"VALUE\" x=\"40.132\" y=\"110.0074\" size=\"1.778\" layer=\"96\" rot=\"R180\"/>\n</instance>\n<instance part=\"R7\" gate=\"G$1\" x=\"25.4\" y=\"111.76\" rot=\"R90\"/>\n<instance part=\"GND13\" gate=\"1\" x=\"25.4\" y=\"101.6\"/>\n<instance part=\"Q1\" gate=\"G$1\" x=\"40.64\" y=\"119.38\" smashed=\"yes\">\n<attribute name=\"NAME\" x=\"43.18\" y=\"124.46\" size=\"1.778\" layer=\"95\"/>\n<attribute name=\"VALUE\" x=\"43.18\" y=\"121.92\" size=\"1.778\" layer=\"96\"/>\n</instance>\n<instance part=\"SUPPLY22\" gate=\"G$1\" x=\"17.78\" y=\"119.38\" smashed=\"yes\" rot=\"R90\">\n<attribute name=\"VALUE\" x=\"14.224\" y=\"118.364\" size=\"1.778\" layer=\"96\" rot=\"R90\"/>\n</instance>\n<instance part=\"SUPPLY27\" gate=\"G$1\" x=\"17.78\" y=\"134.62\" smashed=\"yes\" rot=\"R90\">\n<attribute name=\"VALUE\" x=\"14.224\" y=\"133.604\" size=\"1.778\" layer=\"96\" rot=\"R90\"/>\n</instance>\n<instance part=\"SUPPLY8\" gate=\"G$1\" x=\"106.68\" y=\"114.3\"/>\n<instance part=\"R10\" gate=\"G$1\" x=\"58.42\" y=\"137.16\" rot=\"MR0\"/>\n<instance part=\"R11\" gate=\"G$1\" x=\"81.28\" y=\"137.16\" rot=\"R180\"/>\n<instance part=\"GND16\" gate=\"1\" x=\"93.98\" y=\"124.46\"/>\n<instance part=\"S2\" gate=\"1\" x=\"25.4\" y=\"134.62\"/>\n<instance part=\"K1\" gate=\"G$1\" x=\"251.46\" y=\"22.86\" rot=\"MR0\"/>\n<instance part=\"GND10\" gate=\"1\" x=\"281.94\" y=\"7.62\"/>\n<instance part=\"R1\" gate=\"G$1\" x=\"58.42\" y=\"111.76\" rot=\"R180\"/>\n<instance part=\"R3\" gate=\"G$1\" x=\"22.86\" y=\"48.26\" rot=\"R180\"/>\n<instance part=\"C1\" gate=\"G$1\" x=\"33.02\" y=\"33.02\" rot=\"MR0\"/>\n<instance part=\"C8\" gate=\"G$1\" x=\"111.76\" y=\"35.56\" rot=\"MR180\"/>\n<instance part=\"GND1\" gate=\"1\" x=\"38.1\" y=\"12.7\" rot=\"MR0\"/>\n<instance part=\"GND14\" gate=\"1\" x=\"165.1\" y=\"55.88\" rot=\"MR0\"/>\n<instance part=\"C4\" gate=\"G$1\" x=\"281.94\" y=\"17.78\"/>\n<instance part=\"C10\" gate=\"G$1\" x=\"111.76\" y=\"104.14\"/>\n<instance part=\"U3\" gate=\"G$1\" x=\"91.44\" y=\"106.68\">\n<attribute name=\"PROD_ID\" x=\"91.44\" y=\"106.68\" size=\"1.778\" layer=\"96\" display=\"off\"/>\n</instance>\n<instance part=\"R2\" gate=\"G$1\" x=\"187.96\" y=\"33.02\" rot=\"MR90\"/>\n<instance part=\"R4\" gate=\"G$1\" x=\"195.58\" y=\"17.78\" rot=\"MR90\"/>\n<instance part=\"SUPPLY4\" gate=\"G$1\" x=\"154.94\" y=\"43.18\"/>\n<instance part=\"C9\" gate=\"G$1\" x=\"78.74\" y=\"129.54\" rot=\"R270\"/>\n<instance part=\"U$1\" gate=\"A\" x=\"86.36\" y=\"43.18\"/>\n<instance part=\"L1\" gate=\"G$1\" x=\"53.34\" y=\"43.18\"/>\n<instance part=\"R5\" gate=\"G$1\" x=\"73.66\" y=\"17.78\" rot=\"R180\"/>\n<instance part=\"R9\" gate=\"G$1\" x=\"53.34\" y=\"17.78\" rot=\"R180\"/>\n<instance part=\"GND15\" gate=\"1\" x=\"111.76\" y=\"15.24\" rot=\"MR0\"/>\n<instance part=\"GND17\" gate=\"1\" x=\"187.96\" y=\"5.08\" rot=\"MR0\"/>\n<instance part=\"GND4\" gate=\"1\" x=\"246.38\" y=\"88.9\" rot=\"MR0\"/>\n</instances>\n<busses>\n</busses>\n<nets>\n<net name=\"GND\" class=\"0\">\n<segment>\n<wire x1=\"162.56\" y1=\"127\" x2=\"162.56\" y2=\"121.92\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"162.56\" y1=\"129.54\" x2=\"162.56\" y2=\"127\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"162.56\" y=\"127\"/>\n<wire x1=\"162.56\" y1=\"132.08\" x2=\"162.56\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"162.56\" y=\"129.54\"/>\n<wire x1=\"162.56\" y1=\"134.62\" x2=\"162.56\" y2=\"132.08\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"162.56\" y=\"132.08\"/>\n<pinref part=\"GND5\" gate=\"1\" pin=\"GND\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"GND\"/>\n<wire x1=\"162.56\" y1=\"127\" x2=\"165.1\" y2=\"127\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"GND@38\"/>\n<wire x1=\"165.1\" y1=\"129.54\" x2=\"162.56\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"GND@15\"/>\n<wire x1=\"162.56\" y1=\"132.08\" x2=\"165.1\" y2=\"132.08\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"GND@1\"/>\n<wire x1=\"165.1\" y1=\"134.62\" x2=\"162.56\" y2=\"134.62\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"C2\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"157.48\" y1=\"180.34\" x2=\"157.48\" y2=\"182.88\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND6\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"C3\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"203.2\" y1=\"210.82\" x2=\"203.2\" y2=\"213.36\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND7\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"C5\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"213.36\" y1=\"210.82\" x2=\"213.36\" y2=\"213.36\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND8\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"U1\" gate=\"G$1\" pin=\"VSS\"/>\n<wire x1=\"292.1\" y1=\"106.68\" x2=\"289.56\" y2=\"106.68\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"289.56\" y1=\"106.68\" x2=\"289.56\" y2=\"93.98\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R6\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"281.94\" y1=\"96.52\" x2=\"281.94\" y2=\"93.98\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"289.56\" y1=\"93.98\" x2=\"281.94\" y2=\"93.98\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"281.94\" y=\"93.98\"/>\n<pinref part=\"C6\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"269.24\" y1=\"93.98\" x2=\"269.24\" y2=\"104.14\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"281.94\" y1=\"93.98\" x2=\"269.24\" y2=\"93.98\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"269.24\" y=\"93.98\"/>\n<pinref part=\"JP2\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"243.84\" y1=\"111.76\" x2=\"246.38\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"246.38\" y1=\"111.76\" x2=\"246.38\" y2=\"93.98\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"269.24\" y1=\"93.98\" x2=\"246.38\" y2=\"93.98\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND4\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"246.38\" y1=\"91.44\" x2=\"246.38\" y2=\"93.98\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"246.38\" y=\"93.98\"/>\n</segment>\n<segment>\n<pinref part=\"C19\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND41\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"335.28\" y1=\"91.44\" x2=\"335.28\" y2=\"101.6\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<wire x1=\"38.1\" y1=\"182.88\" x2=\"38.1\" y2=\"187.96\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C11\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND27\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"GND26\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"27.94\" y1=\"193.04\" x2=\"27.94\" y2=\"182.88\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"27.94\" y1=\"193.04\" x2=\"25.4\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"JP15\" gate=\"G$1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"C13\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND29\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"53.34\" y1=\"182.88\" x2=\"53.34\" y2=\"187.96\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"C12\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND28\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"48.26\" y1=\"182.88\" x2=\"48.26\" y2=\"187.96\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"GND@16\"/>\n<pinref part=\"GND33\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"96.52\" y1=\"180.34\" x2=\"93.98\" y2=\"180.34\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"93.98\" y1=\"180.34\" x2=\"93.98\" y2=\"175.26\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"GND@6\"/>\n<wire x1=\"96.52\" y1=\"182.88\" x2=\"93.98\" y2=\"182.88\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"93.98\" y1=\"182.88\" x2=\"93.98\" y2=\"180.34\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"93.98\" y=\"180.34\"/>\n</segment>\n<segment>\n<pinref part=\"C16\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND32\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"88.9\" y1=\"175.26\" x2=\"88.9\" y2=\"182.88\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"GND31\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"83.82\" y1=\"175.26\" x2=\"83.82\" y2=\"182.88\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C15\" gate=\"G$1\" pin=\"2\"/>\n</segment>\n<segment>\n<pinref part=\"C14\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND30\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"73.66\" y1=\"175.26\" x2=\"73.66\" y2=\"182.88\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"GND21\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"111.76\" y1=\"91.44\" x2=\"111.76\" y2=\"101.6\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C10\" gate=\"G$1\" pin=\"2\"/>\n</segment>\n<segment>\n<pinref part=\"C7\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"GND3\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"73.66\" y1=\"101.6\" x2=\"73.66\" y2=\"91.44\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"R7\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"GND13\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"25.4\" y1=\"104.14\" x2=\"25.4\" y2=\"106.68\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"R11\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"GND16\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"86.36\" y1=\"137.16\" x2=\"93.98\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"93.98\" y1=\"137.16\" x2=\"93.98\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C9\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"93.98\" y1=\"129.54\" x2=\"93.98\" y2=\"127\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"83.82\" y1=\"129.54\" x2=\"93.98\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"93.98\" y=\"129.54\"/>\n</segment>\n<segment>\n<pinref part=\"JP15\" gate=\"G$1\" pin=\"SHIELD\"/>\n<wire x1=\"10.16\" y1=\"198.12\" x2=\"7.62\" y2=\"198.12\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"7.62\" y=\"198.12\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"GND10\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"281.94\" y1=\"10.16\" x2=\"281.94\" y2=\"12.7\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"281.94\" y1=\"12.7\" x2=\"281.94\" y2=\"15.24\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"10\"/>\n<wire x1=\"281.94\" y1=\"12.7\" x2=\"261.62\" y2=\"12.7\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"281.94\" y=\"12.7\"/>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"9\"/>\n<wire x1=\"261.62\" y1=\"12.7\" x2=\"256.54\" y2=\"12.7\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"261.62\" y1=\"15.24\" x2=\"256.54\" y2=\"15.24\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"261.62\" y1=\"15.24\" x2=\"261.62\" y2=\"12.7\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"261.62\" y=\"12.7\"/>\n<pinref part=\"C4\" gate=\"G$1\" pin=\"2\"/>\n</segment>\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"GND\"/>\n<wire x1=\"167.64\" y1=\"60.96\" x2=\"165.1\" y2=\"60.96\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"165.1\" y1=\"60.96\" x2=\"165.1\" y2=\"58.42\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND14\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"GND2\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"78.74\" y1=\"101.6\" x2=\"78.74\" y2=\"91.44\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U3\" gate=\"G$1\" pin=\"GND\"/>\n<wire x1=\"78.74\" y1=\"101.6\" x2=\"81.28\" y2=\"101.6\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U$1\" gate=\"A\" pin=\"GND\"/>\n<wire x1=\"68.58\" y1=\"33.02\" x2=\"38.1\" y2=\"33.02\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"38.1\" y1=\"33.02\" x2=\"38.1\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND1\" gate=\"1\" pin=\"GND\"/>\n<wire x1=\"38.1\" y1=\"17.78\" x2=\"38.1\" y2=\"15.24\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"38.1\" y=\"17.78\"/>\n<pinref part=\"C1\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"38.1\" y1=\"17.78\" x2=\"33.02\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"33.02\" y1=\"17.78\" x2=\"33.02\" y2=\"30.48\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R9\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"48.26\" y1=\"17.78\" x2=\"38.1\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"C8\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"111.76\" y1=\"30.48\" x2=\"111.76\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"GND15\" gate=\"1\" pin=\"GND\"/>\n</segment>\n<segment>\n<pinref part=\"R2\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"187.96\" y1=\"27.94\" x2=\"187.96\" y2=\"10.16\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R4\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"187.96\" y1=\"10.16\" x2=\"195.58\" y2=\"10.16\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"195.58\" y1=\"10.16\" x2=\"195.58\" y2=\"12.7\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"187.96\" y1=\"10.16\" x2=\"187.96\" y2=\"7.62\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"187.96\" y=\"10.16\"/>\n<pinref part=\"GND17\" gate=\"1\" pin=\"GND\"/>\n</segment>\n</net>\n<net name=\"3.3V\" class=\"0\">\n<segment>\n<wire x1=\"160.02\" y1=\"195.58\" x2=\"160.02\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R8\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"160.02\" y1=\"208.28\" x2=\"160.02\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"154.94\" y1=\"205.74\" x2=\"154.94\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"154.94\" y1=\"208.28\" x2=\"160.02\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"160.02\" y=\"208.28\"/>\n<pinref part=\"SUPPLY2\" gate=\"G$1\" pin=\"3.3V\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"3V3\"/>\n<wire x1=\"165.1\" y1=\"195.58\" x2=\"160.02\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"C3\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"203.2\" y1=\"223.52\" x2=\"203.2\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY3\" gate=\"G$1\" pin=\"3.3V\"/>\n</segment>\n<segment>\n<pinref part=\"C5\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"213.36\" y1=\"223.52\" x2=\"213.36\" y2=\"220.98\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY5\" gate=\"G$1\" pin=\"3.3V\"/>\n</segment>\n<segment>\n<wire x1=\"99.06\" y1=\"111.76\" x2=\"106.68\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"106.68\" y1=\"111.76\" x2=\"111.76\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"111.76\" y1=\"111.76\" x2=\"111.76\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY8\" gate=\"G$1\" pin=\"3.3V\"/>\n<wire x1=\"106.68\" y1=\"111.76\" x2=\"106.68\" y2=\"114.3\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"106.68\" y=\"111.76\"/>\n<pinref part=\"C10\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"U3\" gate=\"G$1\" pin=\"OUT\"/>\n</segment>\n<segment>\n<pinref part=\"R3\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"17.78\" y1=\"48.26\" x2=\"12.7\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"12.7\" y=\"48.26\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"SW1\" gate=\"G$1\" pin=\"P\"/>\n<wire x1=\"167.64\" y1=\"40.64\" x2=\"165.1\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"165.1\" y1=\"40.64\" x2=\"165.1\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SW1\" gate=\"G$1\" pin=\"P1\"/>\n<wire x1=\"165.1\" y1=\"38.1\" x2=\"167.64\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"165.1\" y1=\"38.1\" x2=\"165.1\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"165.1\" y=\"38.1\"/>\n<pinref part=\"SW2\" gate=\"G$1\" pin=\"P\"/>\n<wire x1=\"165.1\" y1=\"25.4\" x2=\"167.64\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"165.1\" y1=\"25.4\" x2=\"165.1\" y2=\"22.86\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"165.1\" y=\"25.4\"/>\n<pinref part=\"SW2\" gate=\"G$1\" pin=\"P1\"/>\n<wire x1=\"165.1\" y1=\"22.86\" x2=\"167.64\" y2=\"22.86\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY4\" gate=\"G$1\" pin=\"3.3V\"/>\n<wire x1=\"165.1\" y1=\"40.64\" x2=\"154.94\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"154.94\" y1=\"40.64\" x2=\"154.94\" y2=\"43.18\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"165.1\" y=\"40.64\"/>\n</segment>\n</net>\n<net name=\"RESET\" class=\"0\">\n<segment>\n<pinref part=\"R8\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"157.48\" y1=\"193.04\" x2=\"154.94\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"154.94\" y1=\"193.04\" x2=\"154.94\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"154.94\" y1=\"193.04\" x2=\"152.4\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"154.94\" y=\"193.04\"/>\n<label x=\"152.4\" y=\"193.04\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n<pinref part=\"C2\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"157.48\" y1=\"190.5\" x2=\"157.48\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"157.48\" y=\"193.04\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"EN\"/>\n<wire x1=\"157.48\" y1=\"193.04\" x2=\"165.1\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<wire x1=\"289.56\" y1=\"190.5\" x2=\"289.56\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"289.56\" y1=\"193.04\" x2=\"287.02\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"287.02\" y=\"193.04\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n<pinref part=\"Q2\" gate=\"Q1\" pin=\"C\"/>\n</segment>\n</net>\n<net name=\"ADC_BAT\" class=\"0\">\n<segment>\n<pinref part=\"R10\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"R11\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"63.5\" y1=\"137.16\" x2=\"68.58\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"68.58\" y1=\"137.16\" x2=\"76.2\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"68.58\" y1=\"137.16\" x2=\"68.58\" y2=\"147.32\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"68.58\" y=\"137.16\"/>\n<label x=\"68.58\" y=\"147.32\" size=\"1.778\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n<pinref part=\"C9\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"76.2\" y1=\"129.54\" x2=\"68.58\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"68.58\" y1=\"129.54\" x2=\"68.58\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"SENSOR_VN/I39\"/>\n<wire x1=\"200.66\" y1=\"127\" x2=\"205.74\" y2=\"127\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"127\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"TXD\" class=\"0\">\n<segment>\n<label x=\"124.46\" y=\"208.28\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"RXD\"/>\n<wire x1=\"121.92\" y1=\"208.28\" x2=\"124.46\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"TXD\"/>\n<wire x1=\"200.66\" y1=\"195.58\" x2=\"205.74\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"195.58\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"RXD\" class=\"0\">\n<segment>\n<label x=\"124.46\" y=\"210.82\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"TXD\"/>\n<wire x1=\"121.92\" y1=\"210.82\" x2=\"124.46\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"RXD\"/>\n<wire x1=\"200.66\" y1=\"193.04\" x2=\"205.74\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"193.04\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"IO0\" class=\"0\">\n<segment>\n<wire x1=\"289.56\" y1=\"160.02\" x2=\"287.02\" y2=\"160.02\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"287.02\" y=\"160.02\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n<pinref part=\"Q2\" gate=\"Q2\" pin=\"C\"/>\n<wire x1=\"289.56\" y1=\"160.02\" x2=\"289.56\" y2=\"162.56\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO0\"/>\n<wire x1=\"200.66\" y1=\"187.96\" x2=\"205.74\" y2=\"187.96\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"187.96\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"DTR\" class=\"0\">\n<segment>\n<pinref part=\"R17\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"307.34\" y1=\"185.42\" x2=\"312.42\" y2=\"185.42\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"314.96\" y=\"185.42\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<wire x1=\"312.42\" y1=\"185.42\" x2=\"314.96\" y2=\"185.42\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"289.56\" y1=\"172.72\" x2=\"289.56\" y2=\"175.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"289.56\" y1=\"175.26\" x2=\"312.42\" y2=\"175.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"312.42\" y1=\"175.26\" x2=\"312.42\" y2=\"185.42\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"312.42\" y=\"185.42\"/>\n<pinref part=\"Q2\" gate=\"Q2\" pin=\"E\"/>\n</segment>\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"!DTR\"/>\n<wire x1=\"121.92\" y1=\"198.12\" x2=\"124.46\" y2=\"198.12\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"124.46\" y=\"198.12\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"RTS\" class=\"0\">\n<segment>\n<pinref part=\"R18\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"307.34\" y1=\"167.64\" x2=\"309.88\" y2=\"167.64\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"312.42\" y=\"167.64\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<wire x1=\"309.88\" y1=\"167.64\" x2=\"312.42\" y2=\"167.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"309.88\" y1=\"167.64\" x2=\"309.88\" y2=\"177.8\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"309.88\" y=\"167.64\"/>\n<wire x1=\"309.88\" y1=\"177.8\" x2=\"289.56\" y2=\"177.8\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"289.56\" y1=\"177.8\" x2=\"289.56\" y2=\"180.34\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"Q2\" gate=\"Q1\" pin=\"E\"/>\n</segment>\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"!RTS\"/>\n<wire x1=\"121.92\" y1=\"203.2\" x2=\"124.46\" y2=\"203.2\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"124.46\" y=\"203.2\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"N$10\" class=\"0\">\n<segment>\n<pinref part=\"R17\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"297.18\" y1=\"185.42\" x2=\"294.64\" y2=\"185.42\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"Q2\" gate=\"Q1\" pin=\"B\"/>\n</segment>\n</net>\n<net name=\"N$12\" class=\"0\">\n<segment>\n<pinref part=\"R18\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"297.18\" y1=\"167.64\" x2=\"294.64\" y2=\"167.64\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"Q2\" gate=\"Q2\" pin=\"B\"/>\n</segment>\n</net>\n<net name=\"V_USB\" class=\"0\">\n<segment>\n<pinref part=\"U1\" gate=\"G$1\" pin=\"VIN\"/>\n<wire x1=\"312.42\" y1=\"111.76\" x2=\"335.28\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SUPPLY23\" gate=\"G$1\" pin=\"V_USB\"/>\n<wire x1=\"335.28\" y1=\"111.76\" x2=\"335.28\" y2=\"114.3\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C19\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"335.28\" y1=\"111.76\" x2=\"335.28\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"335.28\" y=\"111.76\"/>\n</segment>\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"VCC\"/>\n<wire x1=\"53.34\" y1=\"210.82\" x2=\"58.42\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"58.42\" y1=\"210.82\" x2=\"73.66\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"73.66\" y1=\"210.82\" x2=\"83.82\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"83.82\" y1=\"210.82\" x2=\"96.52\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"83.82\" y1=\"190.5\" x2=\"83.82\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"83.82\" y=\"210.82\"/>\n<pinref part=\"C14\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"73.66\" y1=\"190.5\" x2=\"73.66\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"73.66\" y=\"210.82\"/>\n<wire x1=\"58.42\" y1=\"210.82\" x2=\"58.42\" y2=\"213.36\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"58.42\" y=\"210.82\"/>\n<pinref part=\"F1\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"C15\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"SUPPLY14\" gate=\"G$1\" pin=\"V_USB\"/>\n</segment>\n<segment>\n<wire x1=\"33.02\" y1=\"119.38\" x2=\"30.48\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"30.48\" y1=\"119.38\" x2=\"25.4\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"30.48\" y1=\"119.38\" x2=\"30.48\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"30.48\" y=\"119.38\"/>\n<pinref part=\"D3\" gate=\"G$1\" pin=\"A\"/>\n<wire x1=\"30.48\" y1=\"111.76\" x2=\"33.02\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R7\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"25.4\" y1=\"116.84\" x2=\"25.4\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"25.4\" y=\"119.38\"/>\n<pinref part=\"Q1\" gate=\"G$1\" pin=\"G\"/>\n<pinref part=\"SUPPLY22\" gate=\"G$1\" pin=\"V_USB\"/>\n<wire x1=\"17.78\" y1=\"119.38\" x2=\"25.4\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"V_BATT\" class=\"0\">\n<segment>\n<pinref part=\"SUPPLY25\" gate=\"G$1\" pin=\"V_BATT\"/>\n<wire x1=\"248.92\" y1=\"114.3\" x2=\"248.92\" y2=\"119.38\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"JP2\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"243.84\" y1=\"114.3\" x2=\"248.92\" y2=\"114.3\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C6\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"269.24\" y1=\"111.76\" x2=\"269.24\" y2=\"114.3\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U1\" gate=\"G$1\" pin=\"VBAT\"/>\n<wire x1=\"289.56\" y1=\"111.76\" x2=\"292.1\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"289.56\" y1=\"111.76\" x2=\"289.56\" y2=\"114.3\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"269.24\" y1=\"114.3\" x2=\"289.56\" y2=\"114.3\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"248.92\" y1=\"114.3\" x2=\"269.24\" y2=\"114.3\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"248.92\" y=\"114.3\"/>\n<junction x=\"269.24\" y=\"114.3\"/>\n</segment>\n<segment>\n<pinref part=\"SUPPLY27\" gate=\"G$1\" pin=\"V_BATT\"/>\n<pinref part=\"S2\" gate=\"1\" pin=\"P\"/>\n<wire x1=\"17.78\" y1=\"134.62\" x2=\"22.86\" y2=\"134.62\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"N$16\" class=\"0\">\n<segment>\n<pinref part=\"R6\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"U1\" gate=\"G$1\" pin=\"PROG\"/>\n<wire x1=\"292.1\" y1=\"109.22\" x2=\"281.94\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"281.94\" y1=\"106.68\" x2=\"281.94\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"D-\" class=\"0\">\n<segment>\n<label x=\"43.18\" y=\"200.66\" size=\"1.778\" layer=\"95\" rot=\"MR0\"/>\n<wire x1=\"48.26\" y1=\"200.66\" x2=\"25.4\" y2=\"200.66\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R13\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"C12\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"60.96\" y1=\"200.66\" x2=\"48.26\" y2=\"200.66\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"48.26\" y1=\"200.66\" x2=\"48.26\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"48.26\" y=\"200.66\"/>\n<pinref part=\"JP15\" gate=\"G$1\" pin=\"D-\"/>\n</segment>\n</net>\n<net name=\"D+\" class=\"0\">\n<segment>\n<label x=\"43.18\" y=\"198.12\" size=\"1.778\" layer=\"95\" rot=\"MR0\"/>\n<wire x1=\"53.34\" y1=\"198.12\" x2=\"25.4\" y2=\"198.12\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R14\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"C13\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"60.96\" y1=\"198.12\" x2=\"53.34\" y2=\"198.12\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"53.34\" y1=\"198.12\" x2=\"53.34\" y2=\"195.58\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"53.34\" y=\"198.12\"/>\n<pinref part=\"JP15\" gate=\"G$1\" pin=\"D+\"/>\n</segment>\n</net>\n<net name=\"VUSB-RAW\" class=\"0\">\n<segment>\n<wire x1=\"30.48\" y1=\"203.2\" x2=\"30.48\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"30.48\" y1=\"210.82\" x2=\"38.1\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C11\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"38.1\" y1=\"210.82\" x2=\"40.64\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"38.1\" y1=\"195.58\" x2=\"38.1\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"38.1\" y=\"210.82\"/>\n<wire x1=\"30.48\" y1=\"203.2\" x2=\"25.4\" y2=\"203.2\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"F1\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"JP15\" gate=\"G$1\" pin=\"VCC\"/>\n<wire x1=\"30.48\" y1=\"210.82\" x2=\"27.94\" y2=\"210.82\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"30.48\" y=\"210.82\"/>\n<label x=\"27.94\" y=\"210.82\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"N$7\" class=\"0\">\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"USBDM\"/>\n<pinref part=\"R13\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"96.52\" y1=\"200.66\" x2=\"71.12\" y2=\"200.66\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"N$8\" class=\"0\">\n<segment>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"USBDP\"/>\n<pinref part=\"R14\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"96.52\" y1=\"198.12\" x2=\"71.12\" y2=\"198.12\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"3.3V_F\" class=\"0\">\n<segment>\n<pinref part=\"C16\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"88.9\" y1=\"190.5\" x2=\"88.9\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"!RESET\"/>\n<wire x1=\"88.9\" y1=\"193.04\" x2=\"96.52\" y2=\"193.04\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"88.9\" y1=\"193.04\" x2=\"88.9\" y2=\"205.74\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"88.9\" y=\"193.04\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"3V3OUT\"/>\n<wire x1=\"88.9\" y1=\"205.74\" x2=\"96.52\" y2=\"205.74\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"88.9\" y1=\"205.74\" x2=\"88.9\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"88.9\" y=\"205.74\"/>\n<pinref part=\"U4\" gate=\"U$1\" pin=\"VCCIO\"/>\n<wire x1=\"88.9\" y1=\"208.28\" x2=\"96.52\" y2=\"208.28\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"88.9\" y=\"208.28\" size=\"1.778\" layer=\"95\"/>\n</segment>\n</net>\n<net name=\"N$4\" class=\"0\">\n<segment>\n<pinref part=\"R10\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"Q1\" gate=\"G$1\" pin=\"D\"/>\n<wire x1=\"40.64\" y1=\"137.16\" x2=\"40.64\" y2=\"124.46\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"53.34\" y1=\"137.16\" x2=\"40.64\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"S2\" gate=\"1\" pin=\"O\"/>\n<wire x1=\"40.64\" y1=\"137.16\" x2=\"30.48\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"40.64\" y=\"137.16\"/>\n</segment>\n</net>\n<net name=\"SHARP_SCK\" class=\"0\">\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"256.54\" y1=\"35.56\" x2=\"261.62\" y2=\"35.56\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"261.62\" y=\"35.56\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<label x=\"205.74\" y=\"172.72\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"SCK_H/IO14\"/>\n<wire x1=\"205.74\" y1=\"172.72\" x2=\"200.66\" y2=\"172.72\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"SHARP_CS\" class=\"0\">\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"3\"/>\n<wire x1=\"256.54\" y1=\"30.48\" x2=\"261.62\" y2=\"30.48\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"261.62\" y=\"30.48\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"CS0_H/IO15\"/>\n<wire x1=\"200.66\" y1=\"170.18\" x2=\"205.74\" y2=\"170.18\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"170.18\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"SHARP_EXTMODE\" class=\"0\">\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"8\"/>\n<wire x1=\"256.54\" y1=\"17.78\" x2=\"261.62\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"261.62\" y=\"17.78\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO4\"/>\n<wire x1=\"200.66\" y1=\"182.88\" x2=\"205.74\" y2=\"182.88\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"182.88\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"CRG_STAT\" class=\"0\">\n<segment>\n<pinref part=\"U1\" gate=\"G$1\" pin=\"STAT\"/>\n<wire x1=\"312.42\" y1=\"106.68\" x2=\"314.96\" y2=\"106.68\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"314.96\" y=\"106.68\" size=\"1.778\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"SENSOR_VP/I36\"/>\n<wire x1=\"200.66\" y1=\"129.54\" x2=\"205.74\" y2=\"129.54\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"129.54\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"SHARP_MOSI\" class=\"0\">\n<segment>\n<label x=\"205.74\" y=\"175.26\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"MOSI_H/IO13\"/>\n<wire x1=\"205.74\" y1=\"175.26\" x2=\"200.66\" y2=\"175.26\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"256.54\" y1=\"33.02\" x2=\"261.62\" y2=\"33.02\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"261.62\" y=\"33.02\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"SHARP_VCOM\" class=\"0\">\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO2\"/>\n<wire x1=\"200.66\" y1=\"185.42\" x2=\"205.74\" y2=\"185.42\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"185.42\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"4\"/>\n<wire x1=\"256.54\" y1=\"27.94\" x2=\"261.62\" y2=\"27.94\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"261.62\" y=\"27.94\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"5V\" class=\"0\">\n<segment>\n<label x=\"116.84\" y=\"48.26\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"U$1\" gate=\"A\" pin=\"VOUT\"/>\n<wire x1=\"104.14\" y1=\"48.26\" x2=\"106.68\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"106.68\" y1=\"48.26\" x2=\"111.76\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"111.76\" y1=\"48.26\" x2=\"116.84\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C8\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"111.76\" y1=\"38.1\" x2=\"111.76\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"111.76\" y=\"48.26\"/>\n<pinref part=\"R5\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"78.74\" y1=\"17.78\" x2=\"106.68\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"106.68\" y1=\"17.78\" x2=\"106.68\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"106.68\" y=\"48.26\"/>\n</segment>\n<segment>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"6\"/>\n<wire x1=\"256.54\" y1=\"22.86\" x2=\"261.62\" y2=\"22.86\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"7\"/>\n<wire x1=\"261.62\" y1=\"22.86\" x2=\"281.94\" y2=\"22.86\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"256.54\" y1=\"20.32\" x2=\"261.62\" y2=\"20.32\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"261.62\" y1=\"20.32\" x2=\"261.62\" y2=\"22.86\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"261.62\" y=\"22.86\"/>\n<wire x1=\"281.94\" y1=\"22.86\" x2=\"281.94\" y2=\"30.48\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"K1\" gate=\"G$1\" pin=\"5\"/>\n<wire x1=\"256.54\" y1=\"25.4\" x2=\"261.62\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"261.62\" y1=\"25.4\" x2=\"261.62\" y2=\"22.86\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C4\" gate=\"G$1\" pin=\"1\"/>\n<junction x=\"281.94\" y=\"22.86\"/>\n<label x=\"281.94\" y=\"30.48\" size=\"1.27\" layer=\"95\" rot=\"R90\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_A\" class=\"0\">\n<segment>\n<pinref part=\"SW1\" gate=\"G$1\" pin=\"S1\"/>\n<wire x1=\"177.8\" y1=\"38.1\" x2=\"180.34\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SW1\" gate=\"G$1\" pin=\"S\"/>\n<wire x1=\"177.8\" y1=\"40.64\" x2=\"180.34\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"180.34\" y1=\"40.64\" x2=\"187.96\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"187.96\" y1=\"40.64\" x2=\"200.66\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"180.34\" y1=\"38.1\" x2=\"180.34\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"180.34\" y=\"40.64\"/>\n<label x=\"200.66\" y=\"40.64\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"R2\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"187.96\" y1=\"40.64\" x2=\"187.96\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"187.96\" y=\"40.64\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"XTAL_N/IO33\"/>\n<wire x1=\"200.66\" y1=\"137.16\" x2=\"205.74\" y2=\"137.16\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"137.16\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_B\" class=\"0\">\n<segment>\n<pinref part=\"SW2\" gate=\"G$1\" pin=\"S\"/>\n<wire x1=\"177.8\" y1=\"25.4\" x2=\"180.34\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"SW2\" gate=\"G$1\" pin=\"S1\"/>\n<wire x1=\"180.34\" y1=\"25.4\" x2=\"195.58\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"195.58\" y1=\"25.4\" x2=\"200.66\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"177.8\" y1=\"22.86\" x2=\"180.34\" y2=\"22.86\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"180.34\" y1=\"22.86\" x2=\"180.34\" y2=\"25.4\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"180.34\" y=\"25.4\"/>\n<label x=\"200.66\" y=\"25.4\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n<pinref part=\"R4\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"195.58\" y1=\"25.4\" x2=\"195.58\" y2=\"22.86\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"195.58\" y=\"25.4\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"XTAL_P/IO32\"/>\n<wire x1=\"200.66\" y1=\"139.7\" x2=\"205.74\" y2=\"139.7\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"139.7\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_CENT\" class=\"0\">\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"CENT\"/>\n<wire x1=\"193.04\" y1=\"60.96\" x2=\"195.58\" y2=\"60.96\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"195.58\" y=\"60.96\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO21\"/>\n<wire x1=\"200.66\" y1=\"154.94\" x2=\"205.74\" y2=\"154.94\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"154.94\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_RIGHT\" class=\"0\">\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"RIGHT\"/>\n<wire x1=\"193.04\" y1=\"63.5\" x2=\"195.58\" y2=\"63.5\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"195.58\" y=\"63.5\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"SCK_V/IO18\"/>\n<wire x1=\"200.66\" y1=\"162.56\" x2=\"205.74\" y2=\"162.56\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"162.56\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_LEFT\" class=\"0\">\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"LEFT\"/>\n<wire x1=\"193.04\" y1=\"66.04\" x2=\"195.58\" y2=\"66.04\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"195.58\" y=\"66.04\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"IO22\"/>\n<wire x1=\"200.66\" y1=\"152.4\" x2=\"205.74\" y2=\"152.4\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"152.4\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_DOWN\" class=\"0\">\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"DOWN\"/>\n<wire x1=\"167.64\" y1=\"63.5\" x2=\"165.1\" y2=\"63.5\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"165.1\" y=\"63.5\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"MOSI_V/IO23\"/>\n<wire x1=\"200.66\" y1=\"149.86\" x2=\"205.74\" y2=\"149.86\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"149.86\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"PBT_UP\" class=\"0\">\n<segment>\n<pinref part=\"S1\" gate=\"G$1\" pin=\"UP\"/>\n<wire x1=\"167.64\" y1=\"66.04\" x2=\"165.1\" y2=\"66.04\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"165.1\" y=\"66.04\" size=\"1.27\" layer=\"95\" rot=\"R180\" xref=\"yes\"/>\n</segment>\n<segment>\n<pinref part=\"U2\" gate=\"G$1\" pin=\"MISO_V/IO19\"/>\n<wire x1=\"200.66\" y1=\"160.02\" x2=\"205.74\" y2=\"160.02\" width=\"0.1524\" layer=\"91\"/>\n<label x=\"205.74\" y=\"160.02\" size=\"1.27\" layer=\"95\" xref=\"yes\"/>\n</segment>\n</net>\n<net name=\"N$5\" class=\"0\">\n<segment>\n<pinref part=\"R1\" gate=\"G$1\" pin=\"2\"/>\n<pinref part=\"Q1\" gate=\"G$1\" pin=\"S\"/>\n<wire x1=\"40.64\" y1=\"114.3\" x2=\"40.64\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"40.64\" y1=\"111.76\" x2=\"53.34\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"40.64\" y=\"111.76\"/>\n<pinref part=\"D3\" gate=\"G$1\" pin=\"C\"/>\n<wire x1=\"38.1\" y1=\"111.76\" x2=\"40.64\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"N$1\" class=\"0\">\n<segment>\n<pinref part=\"U$1\" gate=\"A\" pin=\"VIN\"/>\n<pinref part=\"R3\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"68.58\" y1=\"48.26\" x2=\"63.5\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"63.5\" y1=\"48.26\" x2=\"43.18\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"43.18\" y1=\"48.26\" x2=\"33.02\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"33.02\" y1=\"48.26\" x2=\"27.94\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"U$1\" gate=\"A\" pin=\"EN\"/>\n<wire x1=\"68.58\" y1=\"40.64\" x2=\"63.5\" y2=\"40.64\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"63.5\" y1=\"40.64\" x2=\"63.5\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"63.5\" y=\"48.26\"/>\n<pinref part=\"L1\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"45.72\" y1=\"43.18\" x2=\"43.18\" y2=\"43.18\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"43.18\" y1=\"43.18\" x2=\"43.18\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"43.18\" y=\"48.26\"/>\n<pinref part=\"C1\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"33.02\" y1=\"38.1\" x2=\"33.02\" y2=\"48.26\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"33.02\" y=\"48.26\"/>\n</segment>\n</net>\n<net name=\"N$2\" class=\"0\">\n<segment>\n<pinref part=\"U$1\" gate=\"A\" pin=\"SW\"/>\n<pinref part=\"L1\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"68.58\" y1=\"43.18\" x2=\"60.96\" y2=\"43.18\" width=\"0.1524\" layer=\"91\"/>\n</segment>\n</net>\n<net name=\"B_VFB\" class=\"0\">\n<segment>\n<pinref part=\"U$1\" gate=\"A\" pin=\"VFB\"/>\n<wire x1=\"63.5\" y1=\"38.1\" x2=\"68.58\" y2=\"38.1\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"63.5\" y1=\"38.1\" x2=\"63.5\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R9\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"63.5\" y1=\"17.78\" x2=\"58.42\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"R5\" gate=\"G$1\" pin=\"2\"/>\n<wire x1=\"63.5\" y1=\"17.78\" x2=\"68.58\" y2=\"17.78\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"63.5\" y=\"17.78\"/>\n</segment>\n</net>\n<net name=\"N$3\" class=\"0\">\n<segment>\n<wire x1=\"81.28\" y1=\"111.76\" x2=\"78.74\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<pinref part=\"C7\" gate=\"G$1\" pin=\"1\"/>\n<wire x1=\"78.74\" y1=\"111.76\" x2=\"73.66\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"73.66\" y1=\"111.76\" x2=\"73.66\" y2=\"109.22\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"73.66\" y=\"111.76\"/>\n<wire x1=\"63.5\" y1=\"111.76\" x2=\"73.66\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"81.28\" y1=\"106.68\" x2=\"78.74\" y2=\"106.68\" width=\"0.1524\" layer=\"91\"/>\n<wire x1=\"78.74\" y1=\"106.68\" x2=\"78.74\" y2=\"111.76\" width=\"0.1524\" layer=\"91\"/>\n<junction x=\"78.74\" y=\"111.76\"/>\n<pinref part=\"R1\" gate=\"G$1\" pin=\"1\"/>\n<pinref part=\"U3\" gate=\"G$1\" pin=\"IN\"/>\n<pinref part=\"U3\" gate=\"G$1\" pin=\"EN\"/>\n</segment>\n</net>\n</nets>\n</sheet>\n</sheets>\n<errors>\n<approved hash=\"202,1,99.06,101.6,U3,BP,,,,\"/>\n</errors>\n</schematic>\n</drawing>\n<compatibility>\n<note version=\"6.3\" minversion=\"6.2.2\" severity=\"warning\">\nSince Version 6.2.2 text objects can contain more than one line,\nwhich will not be processed correctly with this version.\n</note>\n</compatibility>\n</eagle>\n"
  },
  {
    "path": "LICENSE",
    "content": "                    GNU GENERAL PUBLIC LICENSE\n                       Version 3, 29 June 2007\n\n Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>\n Everyone is permitted to copy and distribute verbatim copies\n of this license document, but changing it is not allowed.\n\n                            Preamble\n\n  The GNU General Public License is a free, copyleft license for\nsoftware and other kinds of works.\n\n  The licenses for most software and other practical works are designed\nto take away your freedom to share and change the works.  By contrast,\nthe GNU General Public License is intended to guarantee your freedom to\nshare and change all versions of a program--to make sure it remains free\nsoftware for all its users.  We, the Free Software Foundation, use the\nGNU General Public License for most of our software; it applies also to\nany other work released this way by its authors.  You can apply it to\nyour programs, too.\n\n  When we speak of free software, we are referring to freedom, not\nprice.  Our General Public Licenses are designed to make sure that you\nhave the freedom to distribute copies of free software (and charge for\nthem if you wish), that you receive source code or can get it if you\nwant it, that you can change the software or use pieces of it in new\nfree programs, and that you know you can do these things.\n\n  To protect your rights, we need to prevent others from denying you\nthese rights or asking you to surrender the rights.  Therefore, you have\ncertain responsibilities if you distribute copies of the software, or if\nyou modify it: responsibilities to respect the freedom of others.\n\n  For example, if you distribute copies of such a program, whether\ngratis or for a fee, you must pass on to the recipients the same\nfreedoms that you received.  You must make sure that they, too, receive\nor can get the source code.  And you must show them these terms so they\nknow their rights.\n\n  Developers that use the GNU GPL protect your rights with two steps:\n(1) assert copyright on the software, and (2) offer you this License\ngiving you legal permission to copy, distribute and/or modify it.\n\n  For the developers' and authors' protection, the GPL clearly explains\nthat there is no warranty for this free software.  For both users' and\nauthors' sake, the GPL requires that modified versions be marked as\nchanged, so that their problems will not be attributed erroneously to\nauthors of previous versions.\n\n  Some devices are designed to deny users access to install or run\nmodified versions of the software inside them, although the manufacturer\ncan do so.  This is fundamentally incompatible with the aim of\nprotecting users' freedom to change the software.  The systematic\npattern of such abuse occurs in the area of products for individuals to\nuse, which is precisely where it is most unacceptable.  Therefore, we\nhave designed this version of the GPL to prohibit the practice for those\nproducts.  If such problems arise substantially in other domains, we\nstand ready to extend this provision to those domains in future versions\nof the GPL, as needed to protect the freedom of users.\n\n  Finally, every program is threatened constantly by software patents.\nStates should not allow patents to restrict development and use of\nsoftware on general-purpose computers, but in those that do, we wish to\navoid the special danger that patents applied to a free program could\nmake it effectively proprietary.  To prevent this, the GPL assures that\npatents cannot be used to render the program non-free.\n\n  The precise terms and conditions for copying, distribution and\nmodification follow.\n\n                       TERMS AND CONDITIONS\n\n  0. Definitions.\n\n  \"This License\" refers to version 3 of the GNU General Public License.\n\n  \"Copyright\" also means copyright-like laws that apply to other kinds of\nworks, such as semiconductor masks.\n\n  \"The Program\" refers to any copyrightable work licensed under this\nLicense.  Each licensee is addressed as \"you\".  \"Licensees\" and\n\"recipients\" may be individuals or organizations.\n\n  To \"modify\" a work means to copy from or adapt all or part of the work\nin a fashion requiring copyright permission, other than the making of an\nexact copy.  The resulting work is called a \"modified version\" of the\nearlier work or a work \"based on\" the earlier work.\n\n  A \"covered work\" means either the unmodified Program or a work based\non the Program.\n\n  To \"propagate\" a work means to do anything with it that, without\npermission, would make you directly or secondarily liable for\ninfringement under applicable copyright law, except executing it on a\ncomputer or modifying a private copy.  Propagation includes copying,\ndistribution (with or without modification), making available to the\npublic, and in some countries other activities as well.\n\n  To \"convey\" a work means any kind of propagation that enables other\nparties to make or receive copies.  Mere interaction with a user through\na computer network, with no transfer of a copy, is not conveying.\n\n  An interactive user interface displays \"Appropriate Legal Notices\"\nto the extent that it includes a convenient and prominently visible\nfeature that (1) displays an appropriate copyright notice, and (2)\ntells the user that there is no warranty for the work (except to the\nextent that warranties are provided), that licensees may convey the\nwork under this License, and how to view a copy of this License.  If\nthe interface presents a list of user commands or options, such as a\nmenu, a prominent item in the list meets this criterion.\n\n  1. Source Code.\n\n  The \"source code\" for a work means the preferred form of the work\nfor making modifications to it.  \"Object code\" means any non-source\nform of a work.\n\n  A \"Standard Interface\" means an interface that either is an official\nstandard defined by a recognized standards body, or, in the case of\ninterfaces specified for a particular programming language, one that\nis widely used among developers working in that language.\n\n  The \"System Libraries\" of an executable work include anything, other\nthan the work as a whole, that (a) is included in the normal form of\npackaging a Major Component, but which is not part of that Major\nComponent, and (b) serves only to enable use of the work with that\nMajor Component, or to implement a Standard Interface for which an\nimplementation is available to the public in source code form.  A\n\"Major Component\", in this context, means a major essential component\n(kernel, window system, and so on) of the specific operating system\n(if any) on which the executable work runs, or a compiler used to\nproduce the work, or an object code interpreter used to run it.\n\n  The \"Corresponding Source\" for a work in object code form means all\nthe source code needed to generate, install, and (for an executable\nwork) run the object code and to modify the work, including scripts to\ncontrol those activities.  However, it does not include the work's\nSystem Libraries, or general-purpose tools or generally available free\nprograms which are used unmodified in performing those activities but\nwhich are not part of the work.  For example, Corresponding Source\nincludes interface definition files associated with source files for\nthe work, and the source code for shared libraries and dynamically\nlinked subprograms that the work is specifically designed to require,\nsuch as by intimate data communication or control flow between those\nsubprograms and other parts of the work.\n\n  The Corresponding Source need not include anything that users\ncan regenerate automatically from other parts of the Corresponding\nSource.\n\n  The Corresponding Source for a work in source code form is that\nsame work.\n\n  2. Basic Permissions.\n\n  All rights granted under this License are granted for the term of\ncopyright on the Program, and are irrevocable provided the stated\nconditions are met.  This License explicitly affirms your unlimited\npermission to run the unmodified Program.  The output from running a\ncovered work is covered by this License only if the output, given its\ncontent, constitutes a covered work.  This License acknowledges your\nrights of fair use or other equivalent, as provided by copyright law.\n\n  You may make, run and propagate covered works that you do not\nconvey, without conditions so long as your license otherwise remains\nin force.  You may convey covered works to others for the sole purpose\nof having them make modifications exclusively for you, or provide you\nwith facilities for running those works, provided that you comply with\nthe terms of this License in conveying all material for which you do\nnot control copyright.  Those thus making or running the covered works\nfor you must do so exclusively on your behalf, under your direction\nand control, on terms that prohibit them from making any copies of\nyour copyrighted material outside their relationship with you.\n\n  Conveying under any other circumstances is permitted solely under\nthe conditions stated below.  Sublicensing is not allowed; section 10\nmakes it unnecessary.\n\n  3. Protecting Users' Legal Rights From Anti-Circumvention Law.\n\n  No covered work shall be deemed part of an effective technological\nmeasure under any applicable law fulfilling obligations under article\n11 of the WIPO copyright treaty adopted on 20 December 1996, or\nsimilar laws prohibiting or restricting circumvention of such\nmeasures.\n\n  When you convey a covered work, you waive any legal power to forbid\ncircumvention of technological measures to the extent such circumvention\nis effected by exercising rights under this License with respect to\nthe covered work, and you disclaim any intention to limit operation or\nmodification of the work as a means of enforcing, against the work's\nusers, your or third parties' legal rights to forbid circumvention of\ntechnological measures.\n\n  4. Conveying Verbatim Copies.\n\n  You may convey verbatim copies of the Program's source code as you\nreceive it, in any medium, provided that you conspicuously and\nappropriately publish on each copy an appropriate copyright notice;\nkeep intact all notices stating that this License and any\nnon-permissive terms added in accord with section 7 apply to the code;\nkeep intact all notices of the absence of any warranty; and give all\nrecipients a copy of this License along with the Program.\n\n  You may charge any price or no price for each copy that you convey,\nand you may offer support or warranty protection for a fee.\n\n  5. Conveying Modified Source Versions.\n\n  You may convey a work based on the Program, or the modifications to\nproduce it from the Program, in the form of source code under the\nterms of section 4, provided that you also meet all of these conditions:\n\n    a) The work must carry prominent notices stating that you modified\n    it, and giving a relevant date.\n\n    b) The work must carry prominent notices stating that it is\n    released under this License and any conditions added under section\n    7.  This requirement modifies the requirement in section 4 to\n    \"keep intact all notices\".\n\n    c) You must license the entire work, as a whole, under this\n    License to anyone who comes into possession of a copy.  This\n    License will therefore apply, along with any applicable section 7\n    additional terms, to the whole of the work, and all its parts,\n    regardless of how they are packaged.  This License gives no\n    permission to license the work in any other way, but it does not\n    invalidate such permission if you have separately received it.\n\n    d) If the work has interactive user interfaces, each must display\n    Appropriate Legal Notices; however, if the Program has interactive\n    interfaces that do not display Appropriate Legal Notices, your\n    work need not make them do so.\n\n  A compilation of a covered work with other separate and independent\nworks, which are not by their nature extensions of the covered work,\nand which are not combined with it such as to form a larger program,\nin or on a volume of a storage or distribution medium, is called an\n\"aggregate\" if the compilation and its resulting copyright are not\nused to limit the access or legal rights of the compilation's users\nbeyond what the individual works permit.  Inclusion of a covered work\nin an aggregate does not cause this License to apply to the other\nparts of the aggregate.\n\n  6. Conveying Non-Source Forms.\n\n  You may convey a covered work in object code form under the terms\nof sections 4 and 5, provided that you also convey the\nmachine-readable Corresponding Source under the terms of this License,\nin one of these ways:\n\n    a) Convey the object code in, or embodied in, a physical product\n    (including a physical distribution medium), accompanied by the\n    Corresponding Source fixed on a durable physical medium\n    customarily used for software interchange.\n\n    b) Convey the object code in, or embodied in, a physical product\n    (including a physical distribution medium), accompanied by a\n    written offer, valid for at least three years and valid for as\n    long as you offer spare parts or customer support for that product\n    model, to give anyone who possesses the object code either (1) a\n    copy of the Corresponding Source for all the software in the\n    product that is covered by this License, on a durable physical\n    medium customarily used for software interchange, for a price no\n    more than your reasonable cost of physically performing this\n    conveying of source, or (2) access to copy the\n    Corresponding Source from a network server at no charge.\n\n    c) Convey individual copies of the object code with a copy of the\n    written offer to provide the Corresponding Source.  This\n    alternative is allowed only occasionally and noncommercially, and\n    only if you received the object code with such an offer, in accord\n    with subsection 6b.\n\n    d) Convey the object code by offering access from a designated\n    place (gratis or for a charge), and offer equivalent access to the\n    Corresponding Source in the same way through the same place at no\n    further charge.  You need not require recipients to copy the\n    Corresponding Source along with the object code.  If the place to\n    copy the object code is a network server, the Corresponding Source\n    may be on a different server (operated by you or a third party)\n    that supports equivalent copying facilities, provided you maintain\n    clear directions next to the object code saying where to find the\n    Corresponding Source.  Regardless of what server hosts the\n    Corresponding Source, you remain obligated to ensure that it is\n    available for as long as needed to satisfy these requirements.\n\n    e) Convey the object code using peer-to-peer transmission, provided\n    you inform other peers where the object code and Corresponding\n    Source of the work are being offered to the general public at no\n    charge under subsection 6d.\n\n  A separable portion of the object code, whose source code is excluded\nfrom the Corresponding Source as a System Library, need not be\nincluded in conveying the object code work.\n\n  A \"User Product\" is either (1) a \"consumer product\", which means any\ntangible personal property which is normally used for personal, family,\nor household purposes, or (2) anything designed or sold for incorporation\ninto a dwelling.  In determining whether a product is a consumer product,\ndoubtful cases shall be resolved in favor of coverage.  For a particular\nproduct received by a particular user, \"normally used\" refers to a\ntypical or common use of that class of product, regardless of the status\nof the particular user or of the way in which the particular user\nactually uses, or expects or is expected to use, the product.  A product\nis a consumer product regardless of whether the product has substantial\ncommercial, industrial or non-consumer uses, unless such uses represent\nthe only significant mode of use of the product.\n\n  \"Installation Information\" for a User Product means any methods,\nprocedures, authorization keys, or other information required to install\nand execute modified versions of a covered work in that User Product from\na modified version of its Corresponding Source.  The information must\nsuffice to ensure that the continued functioning of the modified object\ncode is in no case prevented or interfered with solely because\nmodification has been made.\n\n  If you convey an object code work under this section in, or with, or\nspecifically for use in, a User Product, and the conveying occurs as\npart of a transaction in which the right of possession and use of the\nUser Product is transferred to the recipient in perpetuity or for a\nfixed term (regardless of how the transaction is characterized), the\nCorresponding Source conveyed under this section must be accompanied\nby the Installation Information.  But this requirement does not apply\nif neither you nor any third party retains the ability to install\nmodified object code on the User Product (for example, the work has\nbeen installed in ROM).\n\n  The requirement to provide Installation Information does not include a\nrequirement to continue to provide support service, warranty, or updates\nfor a work that has been modified or installed by the recipient, or for\nthe User Product in which it has been modified or installed.  Access to a\nnetwork may be denied when the modification itself materially and\nadversely affects the operation of the network or violates the rules and\nprotocols for communication across the network.\n\n  Corresponding Source conveyed, and Installation Information provided,\nin accord with this section must be in a format that is publicly\ndocumented (and with an implementation available to the public in\nsource code form), and must require no special password or key for\nunpacking, reading or copying.\n\n  7. Additional Terms.\n\n  \"Additional permissions\" are terms that supplement the terms of this\nLicense by making exceptions from one or more of its conditions.\nAdditional permissions that are applicable to the entire Program shall\nbe treated as though they were included in this License, to the extent\nthat they are valid under applicable law.  If additional permissions\napply only to part of the Program, that part may be used separately\nunder those permissions, but the entire Program remains governed by\nthis License without regard to the additional permissions.\n\n  When you convey a copy of a covered work, you may at your option\nremove any additional permissions from that copy, or from any part of\nit.  (Additional permissions may be written to require their own\nremoval in certain cases when you modify the work.)  You may place\nadditional permissions on material, added by you to a covered work,\nfor which you have or can give appropriate copyright permission.\n\n  Notwithstanding any other provision of this License, for material you\nadd to a covered work, you may (if authorized by the copyright holders of\nthat material) supplement the terms of this License with terms:\n\n    a) Disclaiming warranty or limiting liability differently from the\n    terms of sections 15 and 16 of this License; or\n\n    b) Requiring preservation of specified reasonable legal notices or\n    author attributions in that material or in the Appropriate Legal\n    Notices displayed by works containing it; or\n\n    c) Prohibiting misrepresentation of the origin of that material, or\n    requiring that modified versions of such material be marked in\n    reasonable ways as different from the original version; or\n\n    d) Limiting the use for publicity purposes of names of licensors or\n    authors of the material; or\n\n    e) Declining to grant rights under trademark law for use of some\n    trade names, trademarks, or service marks; or\n\n    f) Requiring indemnification of licensors and authors of that\n    material by anyone who conveys the material (or modified versions of\n    it) with contractual assumptions of liability to the recipient, for\n    any liability that these contractual assumptions directly impose on\n    those licensors and authors.\n\n  All other non-permissive additional terms are considered \"further\nrestrictions\" within the meaning of section 10.  If the Program as you\nreceived it, or any part of it, contains a notice stating that it is\ngoverned by this License along with a term that is a further\nrestriction, you may remove that term.  If a license document contains\na further restriction but permits relicensing or conveying under this\nLicense, you may add to a covered work material governed by the terms\nof that license document, provided that the further restriction does\nnot survive such relicensing or conveying.\n\n  If you add terms to a covered work in accord with this section, you\nmust place, in the relevant source files, a statement of the\nadditional terms that apply to those files, or a notice indicating\nwhere to find the applicable terms.\n\n  Additional terms, permissive or non-permissive, may be stated in the\nform of a separately written license, or stated as exceptions;\nthe above requirements apply either way.\n\n  8. Termination.\n\n  You may not propagate or modify a covered work except as expressly\nprovided under this License.  Any attempt otherwise to propagate or\nmodify it is void, and will automatically terminate your rights under\nthis License (including any patent licenses granted under the third\nparagraph of section 11).\n\n  However, if you cease all violation of this License, then your\nlicense from a particular copyright holder is reinstated (a)\nprovisionally, unless and until the copyright holder explicitly and\nfinally terminates your license, and (b) permanently, if the copyright\nholder fails to notify you of the violation by some reasonable means\nprior to 60 days after the cessation.\n\n  Moreover, your license from a particular copyright holder is\nreinstated permanently if the copyright holder notifies you of the\nviolation by some reasonable means, this is the first time you have\nreceived notice of violation of this License (for any work) from that\ncopyright holder, and you cure the violation prior to 30 days after\nyour receipt of the notice.\n\n  Termination of your rights under this section does not terminate the\nlicenses of parties who have received copies or rights from you under\nthis License.  If your rights have been terminated and not permanently\nreinstated, you do not qualify to receive new licenses for the same\nmaterial under section 10.\n\n  9. Acceptance Not Required for Having Copies.\n\n  You are not required to accept this License in order to receive or\nrun a copy of the Program.  Ancillary propagation of a covered work\noccurring solely as a consequence of using peer-to-peer transmission\nto receive a copy likewise does not require acceptance.  However,\nnothing other than this License grants you permission to propagate or\nmodify any covered work.  These actions infringe copyright if you do\nnot accept this License.  Therefore, by modifying or propagating a\ncovered work, you indicate your acceptance of this License to do so.\n\n  10. Automatic Licensing of Downstream Recipients.\n\n  Each time you convey a covered work, the recipient automatically\nreceives a license from the original licensors, to run, modify and\npropagate that work, subject to this License.  You are not responsible\nfor enforcing compliance by third parties with this License.\n\n  An \"entity transaction\" is a transaction transferring control of an\norganization, or substantially all assets of one, or subdividing an\norganization, or merging organizations.  If propagation of a covered\nwork results from an entity transaction, each party to that\ntransaction who receives a copy of the work also receives whatever\nlicenses to the work the party's predecessor in interest had or could\ngive under the previous paragraph, plus a right to possession of the\nCorresponding Source of the work from the predecessor in interest, if\nthe predecessor has it or can get it with reasonable efforts.\n\n  You may not impose any further restrictions on the exercise of the\nrights granted or affirmed under this License.  For example, you may\nnot impose a license fee, royalty, or other charge for exercise of\nrights granted under this License, and you may not initiate litigation\n(including a cross-claim or counterclaim in a lawsuit) alleging that\nany patent claim is infringed by making, using, selling, offering for\nsale, or importing the Program or any portion of it.\n\n  11. Patents.\n\n  A \"contributor\" is a copyright holder who authorizes use under this\nLicense of the Program or a work on which the Program is based.  The\nwork thus licensed is called the contributor's \"contributor version\".\n\n  A contributor's \"essential patent claims\" are all patent claims\nowned or controlled by the contributor, whether already acquired or\nhereafter acquired, that would be infringed by some manner, permitted\nby this License, of making, using, or selling its contributor version,\nbut do not include claims that would be infringed only as a\nconsequence of further modification of the contributor version.  For\npurposes of this definition, \"control\" includes the right to grant\npatent sublicenses in a manner consistent with the requirements of\nthis License.\n\n  Each contributor grants you a non-exclusive, worldwide, royalty-free\npatent license under the contributor's essential patent claims, to\nmake, use, sell, offer for sale, import and otherwise run, modify and\npropagate the contents of its contributor version.\n\n  In the following three paragraphs, a \"patent license\" is any express\nagreement or commitment, however denominated, not to enforce a patent\n(such as an express permission to practice a patent or covenant not to\nsue for patent infringement).  To \"grant\" such a patent license to a\nparty means to make such an agreement or commitment not to enforce a\npatent against the party.\n\n  If you convey a covered work, knowingly relying on a patent license,\nand the Corresponding Source of the work is not available for anyone\nto copy, free of charge and under the terms of this License, through a\npublicly available network server or other readily accessible means,\nthen you must either (1) cause the Corresponding Source to be so\navailable, or (2) arrange to deprive yourself of the benefit of the\npatent license for this particular work, or (3) arrange, in a manner\nconsistent with the requirements of this License, to extend the patent\nlicense to downstream recipients.  \"Knowingly relying\" means you have\nactual knowledge that, but for the patent license, your conveying the\ncovered work in a country, or your recipient's use of the covered work\nin a country, would infringe one or more identifiable patents in that\ncountry that you have reason to believe are valid.\n\n  If, pursuant to or in connection with a single transaction or\narrangement, you convey, or propagate by procuring conveyance of, a\ncovered work, and grant a patent license to some of the parties\nreceiving the covered work authorizing them to use, propagate, modify\nor convey a specific copy of the covered work, then the patent license\nyou grant is automatically extended to all recipients of the covered\nwork and works based on it.\n\n  A patent license is \"discriminatory\" if it does not include within\nthe scope of its coverage, prohibits the exercise of, or is\nconditioned on the non-exercise of one or more of the rights that are\nspecifically granted under this License.  You may not convey a covered\nwork if you are a party to an arrangement with a third party that is\nin the business of distributing software, under which you make payment\nto the third party based on the extent of your activity of conveying\nthe work, and under which the third party grants, to any of the\nparties who would receive the covered work from you, a discriminatory\npatent license (a) in connection with copies of the covered work\nconveyed by you (or copies made from those copies), or (b) primarily\nfor and in connection with specific products or compilations that\ncontain the covered work, unless you entered into that arrangement,\nor that patent license was granted, prior to 28 March 2007.\n\n  Nothing in this License shall be construed as excluding or limiting\nany implied license or other defenses to infringement that may\notherwise be available to you under applicable patent law.\n\n  12. No Surrender of Others' Freedom.\n\n  If conditions are imposed on you (whether by court order, agreement or\notherwise) that contradict the conditions of this License, they do not\nexcuse you from the conditions of this License.  If you cannot convey a\ncovered work so as to satisfy simultaneously your obligations under this\nLicense and any other pertinent obligations, then as a consequence you may\nnot convey it at all.  For example, if you agree to terms that obligate you\nto collect a royalty for further conveying from those to whom you convey\nthe Program, the only way you could satisfy both those terms and this\nLicense would be to refrain entirely from conveying the Program.\n\n  13. Use with the GNU Affero General Public License.\n\n  Notwithstanding any other provision of this License, you have\npermission to link or combine any covered work with a work licensed\nunder version 3 of the GNU Affero General Public License into a single\ncombined work, and to convey the resulting work.  The terms of this\nLicense will continue to apply to the part which is the covered work,\nbut the special requirements of the GNU Affero General Public License,\nsection 13, concerning interaction through a network will apply to the\ncombination as such.\n\n  14. Revised Versions of this License.\n\n  The Free Software Foundation may publish revised and/or new versions of\nthe GNU General Public License from time to time.  Such new versions will\nbe similar in spirit to the present version, but may differ in detail to\naddress new problems or concerns.\n\n  Each version is given a distinguishing version number.  If the\nProgram specifies that a certain numbered version of the GNU General\nPublic License \"or any later version\" applies to it, you have the\noption of following the terms and conditions either of that numbered\nversion or of any later version published by the Free Software\nFoundation.  If the Program does not specify a version number of the\nGNU General Public License, you may choose any version ever published\nby the Free Software Foundation.\n\n  If the Program specifies that a proxy can decide which future\nversions of the GNU General Public License can be used, that proxy's\npublic statement of acceptance of a version permanently authorizes you\nto choose that version for the Program.\n\n  Later license versions may give you additional or different\npermissions.  However, no additional obligations are imposed on any\nauthor or copyright holder as a result of your choosing to follow a\nlater version.\n\n  15. Disclaimer of Warranty.\n\n  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY\nAPPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT\nHOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM \"AS IS\" WITHOUT WARRANTY\nOF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,\nTHE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR\nPURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM\nIS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF\nALL NECESSARY SERVICING, REPAIR OR CORRECTION.\n\n  16. Limitation of Liability.\n\n  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING\nWILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS\nTHE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY\nGENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE\nUSE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF\nDATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD\nPARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),\nEVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF\nSUCH DAMAGES.\n\n  17. Interpretation of Sections 15 and 16.\n\n  If the disclaimer of warranty and limitation of liability provided\nabove cannot be given local legal effect according to their terms,\nreviewing courts shall apply local law that most closely approximates\nan absolute waiver of all civil liability in connection with the\nProgram, unless a warranty or assumption of liability accompanies a\ncopy of the Program in return for a fee.\n\n                     END OF TERMS AND CONDITIONS\n\n            How to Apply These Terms to Your New Programs\n\n  If you develop a new program, and you want it to be of the greatest\npossible use to the public, the best way to achieve this is to make it\nfree software which everyone can redistribute and change under these terms.\n\n  To do so, attach the following notices to the program.  It is safest\nto attach them to the start of each source file to most effectively\nstate the exclusion of warranty; and each file should have at least\nthe \"copyright\" line and a pointer to where the full notice is found.\n\n    <one line to give the program's name and a brief idea of what it does.>\n    Copyright (C) <year>  <name of author>\n\n    This program is free software: you can redistribute it and/or modify\n    it under the terms of the GNU General Public License as published by\n    the Free Software Foundation, either version 3 of the License, or\n    (at your option) any later version.\n\n    This program is distributed in the hope that it will be useful,\n    but WITHOUT ANY WARRANTY; without even the implied warranty of\n    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n    GNU General Public License for more details.\n\n    You should have received a copy of the GNU General Public License\n    along with this program.  If not, see <https://www.gnu.org/licenses/>.\n\nAlso add information on how to contact you by electronic and paper mail.\n\n  If the program does terminal interaction, make it output a short\nnotice like this when it starts in an interactive mode:\n\n    <program>  Copyright (C) <year>  <name of author>\n    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.\n    This is free software, and you are welcome to redistribute it\n    under certain conditions; type `show c' for details.\n\nThe hypothetical commands `show w' and `show c' should show the appropriate\nparts of the General Public License.  Of course, your program's commands\nmight be different; for a GUI interface, you would use an \"about box\".\n\n  You should also get your employer (if you work as a programmer) or school,\nif any, to sign a \"copyright disclaimer\" for the program, if necessary.\nFor more information on this, and how to apply and follow the GNU GPL, see\n<https://www.gnu.org/licenses/>.\n\n  The GNU General Public License does not permit incorporating your program\ninto proprietary programs.  If your program is a subroutine library, you\nmay consider it more useful to permit linking proprietary applications with\nthe library.  If this is what you want to do, use the GNU Lesser General\nPublic License instead of this License.  But first, please read\n<https://www.gnu.org/licenses/why-not-lgpl.html>.\n"
  },
  {
    "path": "Memo/1_Menu.ino",
    "content": "int menuVal = 0;\r\nint menuPos[18][2];\r\n                    \r\nString menuTitles[18] = {\"  Zeichnen   \", //0\r\n                         \"Einstellungen\", //1\r\n                         \"   Rechner   \", //2\r\n                         \" Nachrichten \", //3\r\n                         \"    Uhr      \", //4\r\n                         \"Lunar Lander \", //5\r\n                         \"  Tastatur   \", //6\r\n                         \" Bibliothek  \", //7\r\n                         \" Wasserwaage \", //8\r\n                         \"  Hackaday   \", //9\r\n                         \"             \", //10\r\n                         \"             \", //11\r\n                         \"             \", //12\r\n                         \"             \", //13\r\n                         \"             \", //14\r\n                         \"             \", //15\r\n                         \"             \", //16\r\n                         \"             \"};//17\r\n\r\nvoid setMenuPos(){\r\n  for(int k = 0; k < 6; k++){\r\n    for(int i = 0; i < 3; i++){\r\n      menuPos[k*3+i][0] = 23 + k*60;\r\n      menuPos[k*3+i][1] = 31 + i*60;\r\n    }\r\n  }  \r\n}\r\n\r\nvoid drawMainMenu(){\r\n\r\n  static boolean firstRun = true;\r\n\r\n  if(firstRun == true){\r\n    display.fillScreen(WHITE);\r\n  }\r\n  \r\n  if(buttonB.wasPressed()){\r\n    currentPage = menuVal+1;\r\n  }\r\n\r\n  if(buttonA.wasPressed()){\r\n    drawClock();\r\n    delay(200); //debounce\r\n    enterSleep();\r\n  }\r\n\r\n  if(buttonLeft.wasPressed()) if(menuVal >= 2) menuVal-=3;\r\n  if(buttonRight.wasPressed()) if(menuVal < 15) menuVal+=3;\r\n  if(buttonUp.wasPressed()) menuVal--;\r\n  if(buttonDown.wasPressed()) menuVal++;\r\n  if(menuVal > 17) menuVal = 17;\r\n  if(menuVal < 0) menuVal = 0;\r\n  \r\n  display.fillScreen(WHITE);\r\n  //grayRect(0, 16, WIDTH, HEIGHT-16);\r\n  drawAppSelect();\r\n  drawIcons();\r\n  drawTaskBar();\r\n  \r\n  display.refresh();\r\n  buttonA.read();\r\n  buttonB.read();\r\n  buttonUp.read();\r\n  buttonDown.read();\r\n  buttonLeft.read();\r\n  buttonRight.read();\r\n  buttonC.read();\r\n  firstRun = false;\r\n}\r\n\r\nvoid drawAppSelect(){\r\n  //app highlight\r\n  display.drawBitmap(menuPos[menuVal][0]-5, menuPos[menuVal][1]-5, select_bmp, 58, 58, BLACK);\r\n  //app description\r\n  display.fillRect(100, HEIGHT-24, WIDTH-200, 2, BLACK);\r\n  display.setTextSize(2);\r\n  display.setTextColor(BLACK);\r\n  display.setCursor(WIDTH/2-74, HEIGHT-18);\r\n  display.println(menuTitles[menuVal]);\r\n}\r\n\r\nvoid drawIcons(){\r\n \r\n  display.drawBitmap(menuPos[0][0], menuPos[0][1], paint_bmp, 48, 48, BLACK);\r\n  display.drawBitmap(menuPos[1][0], menuPos[1][1], settings_bmp, 48, 48, BLACK);\r\n  display.drawBitmap(menuPos[2][0], menuPos[2][1], calc_bmp, 48, 48, BLACK);\r\n  display.drawBitmap(menuPos[3][0], menuPos[3][1], news_bmp, 48, 48, BLACK);\r\n  display.drawBitmap(menuPos[4][0], menuPos[4][1], clock_bmp, 48, 48, BLACK);\r\n  display.drawBitmap(menuPos[5][0], menuPos[5][1], lander_bmp, 48, 48, BLACK);\r\n  display.drawBitmap(menuPos[6][0], menuPos[6][1], keyboard_bmp, 48, 48, BLACK);\r\n  display.drawBitmap(menuPos[7][0], menuPos[7][1], opac_bmp, 48, 48, BLACK);\r\n  display.drawBitmap(menuPos[8][0], menuPos[8][1], level_bmp, 48, 48, BLACK);\r\n  display.drawBitmap(menuPos[9][0], menuPos[9][1], hackaday_bmp, 48, 48, BLACK);\r\n  \r\n}\r\n"
  },
  {
    "path": "Memo/Calc.ino",
    "content": "int calcXY[26][2] = {{  140, 80}, //'7'\r\n                       {  180, 80}, //'8'\r\n                       { 220, 80}, //'9'\r\n                       { 260, 80}, //'/' ---\r\n                       { 140, 120}, //'4'\r\n                       { 180, 120}, //'5'\r\n                       { 220, 120}, //'6'\r\n                       { 260, 120}, //'x' ---\r\n                       { 140, 160}, //'1'\r\n                       { 180, 160}, //'2'\r\n                       { 220, 160}, //'3'\r\n                       { 260, 160}, //'-' ---\r\n                       { 140, 200}, //'0'\r\n                       { 180, 200}, //'C'\r\n                       { 220, 200}, //'='\r\n                       { 260, 200}, //'+'\r\n                       };\r\n\r\nchar calcKeys[27] = {'7', '8', '9', '/', '4', '5', '6', 'x', '1', '2',\r\n                         '3', '-', '0', 'C', '=', '+' };\r\n\r\n\r\nvoid drawCalc(){\r\n  \r\n  static boolean firstRun = true;\r\n  static float memA = 0;\r\n  static float memB = 0;\r\n  static char activeOp = 0;\r\n\r\n  if(firstRun == true){\r\n    sensX = 0.0028;\r\n    sensY = 0.0028;\r\n    mouseX = WIDTH/2;\r\n    mouseY = HEIGHT/2;\r\n    display.fillScreen(BLACK);\r\n    memA = memB = 0;\r\n  }\r\n\r\n  display.fillScreen(BLACK);\r\n\r\n  display.fillRect(110, 26, 180, 36, WHITE);\r\n  \r\n  display.setFont();\r\n  display.setTextSize(2);\r\n  display.setTextColor(BLACK);\r\n  display.setCursor(120,38);\r\n  display.println(memA);  \r\n\r\n\r\n  int mouseOverKey;\r\n\r\n  mouseOverKey = -1;\r\n  for(int i = 0; i < 26; i++){\r\n    boolean keyColor = WHITE;    \r\n    if(isAboveCKey(i)){\r\n      mouseOverKey = i;\r\n      keyColor = BLACK;\r\n      display.fillCircle(calcXY[i][0]+5, calcXY[i][1]+7, 18, WHITE);\r\n    }    \r\n    display.drawChar(calcXY[i][0], calcXY[i][1], calcKeys[i], keyColor, BLACK, 2);\r\n  }\r\n  \r\n  display.drawBitmap(mouseX, mouseY, pointer, 17, 25, WHITE);\r\n  \r\n  mpu.getRotation(&gx, &gy, &gz);\r\n  \r\n  drawTaskBar();\r\n  int refreshtime = millis();\r\n  display.refresh();\r\n  refreshtime = millis() - refreshtime;\r\n  \r\n  firstRun = false;\r\n\r\n  if((buttonC.wasPressed() || buttonB.wasPressed()) && mouseOverKey >= 0){\r\n    if(calcKeys[mouseOverKey] >= 48 && calcKeys[mouseOverKey] < 58){\r\n      memA = memA*10 + calcKeys[mouseOverKey] - 48;\r\n    }\r\n    else if(calcKeys[mouseOverKey] == '/' || calcKeys[mouseOverKey] == 'x' || \r\n            calcKeys[mouseOverKey] == '+' || calcKeys[mouseOverKey] == '-'){\r\n      activeOp = calcKeys[mouseOverKey];\r\n      memB = memA;\r\n      memA = 0;\r\n    }\r\n    else if(calcKeys[mouseOverKey] == 'C'){\r\n      memA = memB = 0;\r\n    }\r\n    else if(calcKeys[mouseOverKey] == '='){\r\n      if(activeOp == '/') memA = memB/memA;\r\n      else if(activeOp == 'x') memA = memB*memA;\r\n      else if(activeOp == '+') memA = memB+memA;\r\n      else if(activeOp == '-') memA = memB-memA;\r\n      activeOp = 0;\r\n    }\r\n  }\r\n  \r\n  Serial.print(\"memA= \");\r\n  Serial.print(memA);\r\n  Serial.print(\" memB= \");\r\n  Serial.print(memB);\r\n  Serial.print(\" activeOp= \");\r\n  Serial.println(activeOp);\r\n  \r\n  if(buttonLeft.wasPressed()){//backspace\r\n    \r\n  }\r\n\r\n  if(buttonA.wasPressed()){\r\n    currentPage = 0; // back to menu\r\n    firstRun = true;\r\n  }\r\n\r\n  if(buttonShoulder.isPressed()){\r\n    mouseX += gx*sensX;\r\n    mouseY += gy*sensY;\r\n    mouseX = constrain(mouseX, 0, WIDTH);\r\n    mouseY = constrain(mouseY, 0, HEIGHT);\r\n  }\r\n  \r\n  buttonA.read();\r\n  buttonB.read();\r\n  buttonC.read();\r\n  buttonUp.read();\r\n  buttonLeft.read();\r\n  buttonRight.read();\r\n  buttonDown.read();\r\n  buttonShoulder.read();\r\n}\r\n\r\nboolean isAboveCKey(int keyNum){\r\n  return (mouseX > calcXY[keyNum][0]-23 && mouseX < calcXY[keyNum][0]+13 && mouseY > calcXY[keyNum][1]-20 && mouseY < calcXY[keyNum][1]+11);\r\n}\r\n"
  },
  {
    "path": "Memo/ClockApp.ino",
    "content": "void drawClockApp(){\r\n  \r\n  static boolean firstRun = true;\r\n\r\n  display.fillScreen(WHITE);\r\n  display.setTextSize(12);\r\n  display.setTextColor(BLACK);\r\n  display.setCursor(25, 60);\r\n  display.printf(\"%02d:%02d\", now.tm_hour, now.tm_min);\r\n  display.setTextSize(4);\r\n  display.setCursor(25, 160);\r\n  display.printf(\"%d.%d.%d\", now.tm_mday, now.tm_mon+1, now.tm_year+1900);\r\n  \r\n  drawTaskBar();\r\n  display.fillRect(WIDTH/2-26, 0, 60, 16, BLACK); //draw over taskbar time\r\n  display.refresh();\r\n\r\n  firstRun = false;\r\n\r\n  if(buttonA.wasPressed()){\r\n    currentPage = 0; // back to menu\r\n    firstRun = true;\r\n  }\r\n  \r\n  buttonA.read();\r\n  buttonB.read();\r\n  buttonUp.read();\r\n  buttonLeft.read();\r\n  buttonRight.read();\r\n}\r\n"
  },
  {
    "path": "Memo/Hackaday.ino",
    "content": "void drawHackaday(){\r\n  \r\n  static boolean firstRun = true;\r\n \r\n    \r\n  if(firstRun == true){\r\n\r\n    display.fillScreen(WHITE);\r\n    display.setCursor(0, 20);\r\n    display.setTextSize(1);\r\n    display.setTextColor(BLACK);\r\n    display.print(\"Connecting to \");\r\n    display.println(ssid);\r\n    display.refresh();\r\n    #ifdef ANCS\r\n    notifications.stop();\r\n    delay(200);\r\n    #endif   \r\n\r\n    if(WifiConnect(8)){\r\n      display.print(\"Connected\\n\");\r\n      display.refresh();\r\n      \r\n      HTTPClient http;\r\n   \r\n      http.begin(\"https://hackaday.com/blog/feed/\"); //Specify the URL\r\n      int httpCode = http.GET();                                        //Make the request\r\n      \r\n      if (httpCode > 0) { //Check for the returning code\r\n          String payload = http.getString();\r\n          //Serial.println(payload);\r\n      \r\n          for(int i = 0; i < 12; i++){\r\n            while(1){\r\n              int first_bracket = payload.indexOf('>');\r\n              if(first_bracket < 0){\r\n                break;\r\n              }\r\n              else if(payload.substring(first_bracket-6, first_bracket) == \"<title\"){\r\n                String headline = payload.substring(first_bracket+1, first_bracket+80);\r\n                headline = headline.substring(0, headline.indexOf('<'));\r\n                display.println(headline);\r\n                payload = payload.substring(first_bracket+1);\r\n                display.refresh();\r\n                break;\r\n              }\r\n              //Serial.println(payload.substring(first_bracket-5, first_bracket));\r\n              payload = payload.substring(first_bracket+1);\r\n            }\r\n          }\r\n          \r\n        } \r\n      else {\r\n        Serial.println(\"Error on HTTP request\");\r\n      }    \r\n   \r\n      http.end(); //Free the resources\r\n      WiFi.disconnect();\r\n      WiFi.mode(WIFI_OFF);\r\n      delay(200);\r\n    }\r\n    else{\r\n      display.print(\"Connection failed!\\n\");\r\n    }\r\n      \r\n  }\r\n\r\n\r\n  \r\n  drawTaskBar();\r\n  display.refresh();\r\n\r\n  firstRun = false;\r\n\r\n  if(buttonA.wasPressed()){\r\n    currentPage = 0; // back to menu\r\n    firstRun = true;\r\n  }\r\n  \r\n  buttonA.read();\r\n  buttonB.read();\r\n}\r\n"
  },
  {
    "path": "Memo/Level.ino",
    "content": "void drawSpiritLevel(){\r\n  \r\n  static boolean firstRun = true;\r\n  static float angle = 0;\r\n\r\n  if(firstRun == true){\r\n  }\r\n\r\n  angle = asin(float(mpu.getAccelerationY())/16000.0)*180.0/3.1415926;   // 3*cos(millis()/3000.0)*70.0;\r\n\r\n  display.fillScreen(WHITE);\r\n  float heightAdd = (WIDTH/2)*tan(degToRad(angle));\r\n  float widthAdd = (HEIGHT/2)/tan(degToRad(angle));\r\n\r\n  //display.drawLine(0, HEIGHT/2+angleAdd, WIDTH, HEIGHT/2-angleAdd, BLACK);\r\n  if (angle < 31 && angle > -31) { //normal\r\n    display.fillTriangle(0, HEIGHT, 0, HEIGHT/2-heightAdd, WIDTH, HEIGHT, BLACK);\r\n    display.fillTriangle(0, HEIGHT/2-heightAdd, WIDTH, HEIGHT/2+heightAdd, WIDTH, HEIGHT, BLACK);\r\n  } else if (angle > 31 && angle < 149 ) { //left tilt\r\n    display.fillTriangle(0, 0, WIDTH/2-widthAdd, 0, 0, HEIGHT, BLACK);\r\n    display.fillTriangle(WIDTH/2-widthAdd, 0, WIDTH/2+widthAdd, HEIGHT, 0, HEIGHT, BLACK);\r\n  } else if (angle < -31 && angle > -149) { //right tilt\r\n    display.fillTriangle(WIDTH, 0, WIDTH/2-widthAdd, 0, WIDTH, HEIGHT, BLACK);\r\n    display.fillTriangle(WIDTH/2-widthAdd, 0, WIDTH/2+widthAdd, HEIGHT, WIDTH, HEIGHT, BLACK);\r\n  } else { //upside town\r\n    display.fillTriangle(0, 0, 0, HEIGHT/2-heightAdd, WIDTH, 0, BLACK);\r\n    display.fillTriangle(0, HEIGHT/2-heightAdd, WIDTH, HEIGHT/2+heightAdd, WIDTH, 0, BLACK);\r\n  }\r\n\r\n  //display.fillCircle(WIDTH/2, HEIGHT/2, 30, WHITE);\r\n\r\n  display.setFont();\r\n  display.setTextSize(2);\r\n  display.setTextColor(BLACK, WHITE);\r\n  display.setCursor(WIDTH/2-20, HEIGHT/2-8);\r\n  display.printf(\"%02.0f%c\", angle, 247);\r\n\r\n  \r\n  drawTaskBar();  \r\n  display.refresh();\r\n  \r\n  firstRun = false;\r\n\r\n  if(buttonA.wasPressed()){\r\n    currentPage = 0; // back to menu\r\n    firstRun = true;\r\n  }\r\n  \r\n  buttonA.read();\r\n  buttonB.read();\r\n  buttonUp.read();\r\n  buttonLeft.read();\r\n  buttonRight.read();\r\n}\r\n\r\nfloat degToRad(float num){\r\n  return 0.01745329 * num;\r\n}\r\n"
  },
  {
    "path": "Memo/Lunar.ino",
    "content": "// code derived from processing.org user antiplastik https://www.processing.org/discourse/beta/num_1259265932.html\r\nvoid drawLunar(){\r\n  \r\n  static boolean firstRun = true;\r\n  \r\n  static float GRAVITY = 0.08;\r\n  static float AIR = 0.99;\r\n  static float TURN_VALUE = PI/40;\r\n  static float PROP = 0.5;\r\n  \r\n  static float posx, posy;\r\n  static float rot;\r\n   \r\n  static float vx, vy;\r\n  static float vrot;\r\n\r\n  if(firstRun == true){\r\n    vx = vy = vrot = 0;\r\n    rot = -PI/2;\r\n    posx = WIDTH/2;\r\n    posy = HEIGHT/2;\r\n    display.fillScreen(WHITE);\r\n  }\r\n\r\n  if(buttonUp.isPressed() || buttonB.isPressed()){\r\n    vx += PROP*cos(rot);\r\n    vy += PROP*sin(rot);\r\n  }\r\n  if(buttonLeft.isPressed()){\r\n    vrot -= TURN_VALUE/10;\r\n  }\r\n  if(buttonRight.isPressed()){\r\n    vrot += TURN_VALUE/10;\r\n  }\r\n  \r\n  posx += vx;\r\n  posy += vy;\r\n  vy += GRAVITY;\r\n  vrot *= AIR;\r\n  vy *= AIR;\r\n  rot += vrot;\r\n\r\n  float rPos[3][2] = {{0, -5},{0, 5},{10, 0}};\r\n  for(int i = 0; i < 3; i++){\r\n    float ytemp = rPos[i][0];\r\n    rPos[i][0] = posx + rPos[i][0]*cos(rot) - rPos[i][1]*sin(rot);\r\n    rPos[i][1] = posy + ytemp*sin(rot) + rPos[i][1]*cos(rot);\r\n  }\r\n  display.fillScreen(WHITE);\r\n  display.fillTriangle(rPos[0][0], rPos[0][1], rPos[1][0], rPos[1][1], rPos[2][0], rPos[2][1], BLACK);\r\n  //display.fillRect(0, 0, 400, 240, WHITE);\r\n  \r\n  drawTaskBar();\r\n  //int refreshtime = millis();\r\n  display.refresh();\r\n  //refreshtime = millis() - refreshtime;\r\n  //Serial.print(\"refresh: \");\r\n  //Serial.print(refreshtime);\r\n  //Serial.print(\"  \");\r\n  \r\n  firstRun = false;\r\n\r\n  if(buttonA.wasPressed()){\r\n    currentPage = 0; // back to menu\r\n    firstRun = true;\r\n  }\r\n  \r\n  buttonA.read();\r\n  buttonB.read();\r\n  buttonUp.read();\r\n  buttonLeft.read();\r\n  buttonRight.read();\r\n}\r\n"
  },
  {
    "path": "Memo/Memo.ino",
    "content": "// Tested with ESP32 Core V1.0.4\r\n//#define ANCS //uncomment to enable ANCS messages\r\n#include <Adafruit_GFX.h>\r\n#include <Adafruit_SharpMem.h>\r\n#include <Fonts/FreeSansBold9pt7b.h>\r\n#include <Fonts/FreeSans9pt7b.h>\r\n\r\n#include <Button.h> // https://github.com/JChristensen/Button\r\n\r\n#include \"esp_sleep.h\"\r\n#include \"driver/rtc_io.h\"\r\n#include \"esp32/ulp.h\"\r\n#include \"bmp.h\"\r\n\r\n#include \"ulp_main.h\"\r\n#include \"ulptool.h\"\r\n\r\n#include <WiFi.h>\r\n#include <HTTPClient.h>\r\n#include <NTPClient.h>\r\n\r\n#include \"I2Cdev.h\"\r\n#include \"MPU6050.h\"\r\n#include \"Wire.h\"\r\nMPU6050 mpu;\r\n\r\n#ifdef ANCS\r\n  #include \"esp32notifications.h\" // https://www.github.com/Smartphone-Companions/ESP32-ANCS-Notifications.git\r\n  BLENotifications notifications;\r\n  uint32_t incomingCallNotificationUUID;\r\n  boolean ancsDisconnectFlag = false;\r\n  String latestNotificationTitle;\r\n  String latestNotificationMessage;\r\n  unsigned long notificatonCounter = 0;\r\n#endif\r\n \r\nchar* ssid = \"SSIDA\";\r\nchar* password = \"PASSWORDA\";\r\n\r\nchar* ssidB = \"SSIDB\";\r\nchar* passwordB = \"PASSWORDB\";\r\n\r\nWiFiUDP ntpUDP;\r\nNTPClient timeClient(ntpUDP);\r\n\r\n#define BLACK 0\r\n#define WHITE 1\r\n\r\n#define WIDTH 400\r\n#define HEIGHT 240\r\n\r\n#define SHARP_SCK  14\r\n#define SHARP_MOSI 13\r\n#define SHARP_SS   15\r\n\r\n#define I2C_SDA 26\r\n#define I2C_SCL 25\r\n#define INTP 34\r\n\r\n#define ADC_BAT 39\r\n#define CRG_STAT 36\r\n\r\n#define ABUT 33\r\n#define BBUT 32\r\n#define UBUT 19\r\n#define DBUT 23\r\n#define LBUT 22\r\n#define RBUT 18\r\n#define CBUT 21\r\n#define SBUT 35\r\n\r\n//#define SKIPBOOTSCREEN\r\n\r\n//Pushbuttons connected to GPIO32 & GPIO33 for wakeup\r\n#define BUTTON_PIN_BITMASK 0x300000000\r\nextern const uint8_t ulp_main_bin_start[] asm(\"_binary_ulp_main_bin_start\");\r\nextern const uint8_t ulp_main_bin_end[]   asm(\"_binary_ulp_main_bin_end\");\r\ngpio_num_t ulp_toggle_num = GPIO_NUM_2;\r\n\r\nButton buttonA(ABUT, false, false, 5); //pin, pullup, invert, debounce\r\nButton buttonB(BBUT, false, false, 5);\r\nButton buttonUp(UBUT, true, true, 5); // turn on pullups for joystick only\r\nButton buttonDown(DBUT, true, true, 5);\r\nButton buttonLeft(LBUT, true, true, 5);\r\nButton buttonRight(RBUT, true, true, 5);\r\nButton buttonC(CBUT, true, true, 5);\r\nButton buttonShoulder(SBUT, false, false, 5);\r\n\r\nTaskHandle_t Task1;\r\nTaskHandle_t Task2;\r\n\r\nAdafruit_SharpMem display(SHARP_SCK, SHARP_MOSI, SHARP_SS, 400, 240);\r\n\r\nint currentPage = 0; // main menu\r\n\r\nunsigned long fpsCounter = 0;\r\nfloat fps = 0;\r\n\r\nfloat battVoltage;\r\nfloat chargeState;\r\nboolean USBConnected = true;\r\nboolean BLEConnected = false;\r\nboolean Charging = false;\r\nboolean batteryConnected = true;\r\n\r\nstruct tm now;\r\nRTC_DATA_ATTR int syncCounter = 0; //count wakeups for time sync (RTC memory is not erased during sleep)\r\n\r\nfloat mouseX, mouseY;\r\n\r\nint16_t gx, gy, gz;\r\nfloat sensX = 0.0022;\r\nfloat sensY = 0.0018;\r\n\r\nstatic void init_ulp_program() \r\n{\r\n  esp_err_t err = ulptool_load_binary(0, ulp_main_bin_start, (ulp_main_bin_end - ulp_main_bin_start) / sizeof(uint32_t));\r\n  ESP_ERROR_CHECK(err);\r\n\r\n  rtc_gpio_init(ulp_toggle_num);\r\n  rtc_gpio_pulldown_dis(ulp_toggle_num); // disable VCOM pulldown (saves 80µA)\r\n  rtc_gpio_set_direction(ulp_toggle_num, RTC_GPIO_MODE_OUTPUT_ONLY);\r\n\r\n  /* Set ULP wake up period to 500ms */\r\n  ulp_set_wakeup_period(0, 500 * 1000);\r\n}\r\n\r\nvoid enterSleep(){\r\n  //Serial.printf(\"Entering deep sleep\\n\\n\");\r\n  /* Turn off wireless features */ //needs to be tested but should be OK!\r\n  WiFi.disconnect(true);\r\n  WiFi.mode(WIFI_OFF);\r\n  btStop();\r\n  /* Put MPU6050 into sleep mode */\r\n  mpu.setSleepEnabled(true);\r\n  /* Start the ULP program */\r\n  ESP_ERROR_CHECK( ulp_run((&ulp_entry - RTC_SLOW_MEM) / sizeof(uint32_t)));\r\n  ESP_ERROR_CHECK( esp_sleep_enable_ulp_wakeup() );\r\n  //Configure GPIO32 & GPIO33 as ext1 wake up source for HIGH logic level\r\n  esp_sleep_enable_ext1_wakeup(BUTTON_PIN_BITMASK,ESP_EXT1_WAKEUP_ANY_HIGH);\r\n  //wake up at full minute\r\n  esp_sleep_enable_timer_wakeup((60-now.tm_sec) * 1000000);\r\n  //Go to sleep now\r\n  esp_deep_sleep_start();\r\n}\r\n\r\nvoid setup(void){\r\n\r\n  esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();\r\n  if (cause != ESP_SLEEP_WAKEUP_ULP) {\r\n    init_ulp_program();\r\n  }\r\n  if(cause == ESP_SLEEP_WAKEUP_TIMER){\r\n    if(syncCounter++ >= 360){ //sync with ntp server every 6h\r\n      syncRTC();\r\n      syncCounter = 0;\r\n    }\r\n    display.begin();\r\n    display.clearDisplay();\r\n    display.setRotation(0);\r\n    getLocalTime(&now,0);\r\n    drawClock();\r\n    enterSleep();\r\n  }\r\n  pinMode(0, OUTPUT); // don't change, -10µA???\r\n\r\n  display.begin();\r\n  display.clearDisplay();\r\n  display.setRotation(0); //Tetris?\r\n\r\n  Serial.begin(115200);\r\n  Serial.print(\"Wakeup cause: \");\r\n  if(cause == ESP_SLEEP_WAKEUP_UNDEFINED) Serial.println(\"ESP_SLEEP_WAKEUP_UNDEFINED\"); //normal reset\r\n  else if(cause == ESP_SLEEP_WAKEUP_ALL) Serial.println(\"ESP_SLEEP_WAKEUP_ALL\");\r\n  else if(cause == ESP_SLEEP_WAKEUP_EXT0) Serial.println(\"ESP_SLEEP_WAKEUP_EXT0\");\r\n  else if(cause == ESP_SLEEP_WAKEUP_EXT1) Serial.println(\"ESP_SLEEP_WAKEUP_EXT1\"); //button A&B\r\n  else if(cause == ESP_SLEEP_WAKEUP_TIMER) Serial.println(\"ESP_SLEEP_WAKEUP_TIMER\"); //scheduled timer wakeup\r\n  else if(cause == ESP_SLEEP_WAKEUP_TOUCHPAD) Serial.println(\"ESP_SLEEP_WAKEUP_TOUCHPAD\");\r\n  else if(cause == ESP_SLEEP_WAKEUP_ULP) Serial.println(\"ESP_SLEEP_WAKEUP_ULP\");\r\n  else if(cause == ESP_SLEEP_WAKEUP_GPIO) Serial.println(\"ESP_SLEEP_WAKEUP_GPIO\");\r\n  else if(cause == ESP_SLEEP_WAKEUP_UART) Serial.println(\"ESP_SLEEP_WAKEUP_UART\");\r\n\r\n\r\n  pinMode(ABUT, INPUT);\r\n  pinMode(BBUT, INPUT);\r\n  pinMode(UBUT, INPUT_PULLUP);\r\n  pinMode(DBUT, INPUT_PULLUP);\r\n  pinMode(LBUT, INPUT_PULLUP);\r\n  pinMode(RBUT, INPUT_PULLUP);\r\n  pinMode(CBUT, INPUT_PULLUP);\r\n  pinMode(SBUT, INPUT_PULLUP);\r\n\r\n  pinMode(CRG_STAT, INPUT);\r\n  pinMode(ADC_BAT, INPUT);\r\n  pinMode(INTP, INPUT_PULLUP);\r\n  adcAttachPin(CRG_STAT);\r\n  adcAttachPin(ADC_BAT);\r\n  analogReadResolution(12);\r\n  analogSetWidth(12);\r\n  analogSetAttenuation(ADC_11db);\r\n\r\n  \r\n  Wire.begin(I2C_SDA, I2C_SCL, 400000);\r\n  mpu.initialize();\r\n  mpu.setXAccelOffset(-1839);\r\n  mpu.setYAccelOffset(893);\r\n  mpu.setZAccelOffset(4861);\r\n  mpu.setXGyroOffset(87);\r\n  mpu.setYGyroOffset(22);\r\n  mpu.setZGyroOffset(-130);\r\n  \r\n  //create a task that will be executed in the Task1code() function, with priority 1 and executed on core 0\r\n  xTaskCreatePinnedToCore(\r\n                    Task1code,   /* Task function. */\r\n                    \"Task1\",     /* name of task. */\r\n                    10000,       /* Stack size of task */\r\n                    NULL,        /* parameter of the task */\r\n                    1,           /* priority of the task */\r\n                    &Task1,      /* Task handle to keep track of created task */\r\n                    0);          /* pin task to core 0 */     \r\n\r\n  #ifdef ANCS\r\n    notifications.begin(\"ESP32 Memo\"); // Start ANCS \r\n    notifications.setConnectionStateChangedCallback(onBLEStateChanged);\r\n    notifications.setNotificationCallback(onNotificationArrived);\r\n    notifications.setRemovedCallback(onNotificationRemoved);\r\n  #endif\r\n                           \r\n  if(cause == ESP_SLEEP_WAKEUP_UNDEFINED){ //run on reset only\r\n    #if !defined SKIPBOOTSCREEN\r\n      display.fillScreen(BLACK);\r\n      display.setTextSize(2);\r\n      display.setTextColor(WHITE);\r\n      display.setCursor(0, 20);\r\n      display.println(\"Memory Display OS Version 0.07\");\r\n      display.refresh();\r\n      display.println(\"Copyright(C) 2019-2020 CoreTech\");\r\n      display.refresh();\r\n      display.printf(\"CPU: Xtensa LX6 2 CPU %dMHz\\n\\n\", getCpuFrequencyMhz());\r\n      display.refresh();\r\n\r\n      if (WifiConnect(5) == false){ // switch to backup wifi\r\n        ssid = ssidB;\r\n        password = passwordB;\r\n      }\r\n      \r\n      display.println(\"Fetching time from NTP server...\");\r\n      if(syncRTC()) display.println(\"Time synced\");\r\n      else display.println(\"Time sync failed\");\r\n      display.refresh();\r\n      delay(500);\r\n    #endif\r\n  }\r\n\r\n  setMenuPos();\r\n  \r\n}\r\n\r\nvoid Task1code( void * pvParameters ){\r\n  for(;;){\r\n    adcAttachPin(CRG_STAT);\r\n    adcAttachPin(ADC_BAT);\r\n    analogReadResolution(12);\r\n    analogSetWidth(12);\r\n    analogSetAttenuation(ADC_11db);\r\n  \r\n    battVoltage = analogRead(ADC_BAT)*6.6/4096.0*1.1;\r\n    if(battVoltage < 3.6 && battVoltage > 2){ //force standby when battery is critical\r\n      display.fillScreen(WHITE);\r\n      display.setTextSize(3);\r\n      display.setTextColor(BLACK);\r\n      display.setCursor(0, 26);\r\n      display.println(\"  Battery Critical\");\r\n      display.println(\"  Please turn off\");\r\n      display.println(\"  and recharge\");\r\n      display.refresh();\r\n      /* Put MPU6050 into sleep mode */\r\n      WiFi.disconnect(true);\r\n      WiFi.mode(WIFI_OFF);\r\n      btStop();\r\n      mpu.setSleepEnabled(true);\r\n      esp_deep_sleep_start();\r\n    }\r\n    //TODO: measure V_USB in next hardware revision!\r\n    if(battVoltage > 4.21){\r\n      Charging = true;\r\n      USBConnected = true;\r\n      batteryConnected = true;\r\n    }\r\n    else if(battVoltage < 1){\r\n      Charging = false;\r\n      USBConnected = true;\r\n      batteryConnected = false;\r\n    }\r\n    else{\r\n      Charging = false;\r\n      USBConnected = false;\r\n      batteryConnected = true;\r\n    }\r\n    #ifdef ANCS\r\n    // Restart BLE Advertising to prevent reconnect issue\r\n    if(ancsDisconnectFlag) { \r\n      delay(100);\r\n      notifications.startAdvertising();\r\n      ancsDisconnectFlag = false;\r\n    }\r\n    #endif\r\n    getLocalTime(&now,0);\r\n    delay(500); //core 0 needs free time for background tasks\r\n  }\r\n}\r\n\r\nvoid loop(void){\r\n  fps = 1000/float(millis()-fpsCounter);\r\n  fpsCounter = millis();\r\n\r\n  \r\n  //Serial.print(fps);\r\n  //Serial.println(\"fps\");\r\n\r\n  if(currentPage == 1) drawPaint();\r\n  //else if(currentPage == 2) drawSettings();\r\n  else if(currentPage == 3) drawCalc();\r\n  else if(currentPage == 4) drawNews();\r\n  else if(currentPage == 5) drawClockApp();\r\n  else if(currentPage == 6) drawLunar();\r\n  else if(currentPage == 7) drawKeyboardDemo();\r\n  //else if(currentPage == 8) drawOpac();\r\n  else if(currentPage == 9) drawSpiritLevel();\r\n  else if(currentPage == 10) drawHackaday();\r\n  else drawMainMenu();\r\n}\r\n\r\n///\r\n\r\nvoid drawTaskBar(){\r\n  display.fillRect(0, 0, WIDTH, 16, BLACK);\r\n  //time\r\n  display.setFont();\r\n  display.setTextSize(2);\r\n  display.setTextColor(WHITE);\r\n  //clock\r\n  display.setCursor(WIDTH/2-26,0);\r\n  display.printf(\"%02d:%02d\", now.tm_hour, now.tm_min);\r\n  //battery\r\n  //display.printf(\"   %d\", analogRead(ADC_BAT));\r\n  display.setCursor(10,0);  \r\n  //display.printf(\" %.2fV\", battVoltage);\r\n  display.drawRect(WIDTH-30, 3, 19, 10, WHITE);\r\n  display.fillRect(WIDTH-11, 5, 2, 6, WHITE);\r\n  if(batteryConnected){\r\n    if(battVoltage > 3.7) display.fillRect(WIDTH-28, 5, 3, 6, WHITE);\r\n    if(battVoltage > 3.8) display.fillRect(WIDTH-24, 5, 3, 6, WHITE);\r\n    if(battVoltage > 3.9) display.fillRect(WIDTH-20, 5, 3, 6, WHITE);\r\n    if(battVoltage > 4.1) display.fillRect(WIDTH-16, 5, 3, 6, WHITE);\r\n  }\r\n  //USB\r\n  if(USBConnected){\r\n    display.fillRect(WIDTH-45, 5, 9, 5, WHITE);\r\n    display.fillRect(WIDTH-44, 2, 2, 4, WHITE);\r\n    display.fillRect(WIDTH-39, 2, 2, 4, WHITE);\r\n    display.fillRect(WIDTH-42, 10, 3, 4, WHITE);\r\n  }\r\n  if(BLEConnected){\r\n    display.drawBitmap(WIDTH-57, 2, bluetooth_bmp, 6, 12, WHITE);\r\n  }\r\n  #ifdef ANCS\r\n    if(notificatonCounter > millis()){\r\n      display.fillRect(0, 16, WIDTH, 50, BLACK);\r\n      display.fillRoundRect(5, 16, WIDTH-(5*2), 50-5, 6, WHITE);\r\n      display.setCursor(8, 28);\r\n      display.setTextSize(1);\r\n      display.setTextColor(BLACK);\r\n  \r\n      display.setTextWrap(false);\r\n      display.setFont(&FreeSansBold9pt7b);\r\n      display.print(latestNotificationTitle.substring(0, 42));\r\n      \r\n      display.setCursor(8, 54);\r\n      display.setFont(&FreeSans9pt7b);\r\n      display.print(latestNotificationMessage.substring(0, 42));\r\n      if(latestNotificationMessage.length() >= 38) display.print(\"...\");\r\n      display.setTextWrap(true);\r\n    \r\n      display.setFont();\r\n    }\r\n  #endif\r\n    \r\n}\r\n\r\nvoid grayRect(int x, int y, int w, int h) {\r\n  boolean toggle = true;\r\n  for (int i = x; i < x+w; i++) {\r\n    for (int k = y; k < y+h; k++) {\r\n      if (toggle) display.drawPixel(i, k+i%2, BLACK);\r\n      toggle = !toggle;\r\n    }\r\n  }\r\n}\r\n\r\nboolean syncRTC(){\r\n  if(WifiConnect(5)){\r\n    timeClient.begin();\r\n    timeClient.setTimeOffset(7200); //+2hr for DST\r\n    timeClient.update();\r\n    timeval epoch = {timeClient.getEpochTime(), 0};\r\n    const timeval *tv = &epoch;\r\n    timezone utc = {0,0};\r\n    const timezone *tz = &utc;\r\n    settimeofday(tv, tz);\r\n    WiFi.disconnect();\r\n    WiFi.mode(WIFI_OFF);\r\n    return true;\r\n  }\r\n  else return false;\r\n}\r\n\r\nboolean WifiConnect(unsigned int timeout){\r\n  WiFi.begin(ssid, password);\r\n  while (WiFi.status() != WL_CONNECTED) {\r\n      delay(500);\r\n      timeout--;\r\n      if(timeout == 0) break;\r\n  }\r\n  if(WiFi.status() == WL_CONNECTED) return true;\r\n  else return false;\r\n}\r\n\r\nvoid drawClock(){\r\n  display.fillScreen(BLACK);\r\n  display.setTextSize(12);\r\n  display.setTextColor(WHITE);\r\n  display.setCursor(25, 60);\r\n  display.printf(\"%02d:%02d\", now.tm_hour, now.tm_min);\r\n  display.setTextSize(4);\r\n  display.setCursor(25, 160);\r\n  display.printf(\"%d.%d.%d\", now.tm_mday, now.tm_mon+1, now.tm_year+1900);\r\n  display.refresh();\r\n}\r\n\r\n#ifdef ANCS\r\n  void onNotificationRemoved(const ArduinoNotification * notification, const Notification * rawNotificationData) {\r\n       display.printf(\"Removed notification: %s\\n%s\\n%s\\n\", notification->title, notification->message, notification->type);\r\n  }\r\n  \r\n  void onNotificationArrived(const ArduinoNotification * notification, const Notification * rawNotificationData) {\r\n      latestNotificationTitle = notification->title;\r\n      latestNotificationMessage = notification->message;    \r\n      display.printf(\"Got notification: %s\\n%s\\n%s\\n\", notification->title, notification->message, notification->type);\r\n      Serial.println(notifications.getNotificationCategoryDescription(notification->category));  // ie \"social media\"\r\n      Serial.println(notification->categoryCount); // How may other notifications are there from this app (ie badge number)\r\n      notificatonCounter = millis() + 3000;\r\n  }\r\n  \r\n  void onBLEStateChanged(BLENotifications::State state) {\r\n    switch(state) {\r\n        case BLENotifications::StateConnected:\r\n            Serial.println(\"StateConnected - connected to a phone or tablet\");\r\n            BLEConnected = true;\r\n            break;\r\n  \r\n        case BLENotifications::StateDisconnected:\r\n            Serial.println(\"StateDisconnected - disconnected from a phone or tablet\"); \r\n            ancsDisconnectFlag = true;\r\n            BLEConnected = false;\r\n            break; \r\n    }\r\n  }\r\n#endif\r\n"
  },
  {
    "path": "Memo/News.ino",
    "content": "void drawNews(){\r\n  \r\n  static boolean firstRun = true;\r\n  display.setFont();\r\n    \r\n  if(firstRun == true){\r\n\r\n    display.fillScreen(WHITE);\r\n    display.setCursor(0, 20);\r\n    display.setTextSize(1);\r\n    display.setTextColor(BLACK);\r\n    display.print(\"Connecting to \");\r\n    display.println(ssid);\r\n    display.refresh();\r\n    #ifdef ANCS\r\n    notifications.stop();\r\n    delay(200);\r\n    #endif    \r\n\r\n    if(WifiConnect(8)){\r\n      display.print(\"Connected\\n\");\r\n      display.refresh();\r\n    \r\n      HTTPClient http;\r\n   \r\n      http.begin(\"http://www.tagesschau.de/xml/atom/\"); //Specify the URL\r\n      int httpCode = http.GET();                                        //Make the request\r\n      \r\n      if (httpCode > 0) { //Check for the returning code\r\n          String payload = http.getString();\r\n          payload.replace(\"ü\", String(char(129))); //ü\r\n          payload.replace(\"ä\", String(char(132))); //ä\r\n          payload.replace(\"ö\", String(char(148))); //ö\r\n          payload.replace(\"Ü\", String(char(154))); //Ü\r\n          payload.replace(\"Ä\", String(char(142))); //Ä\r\n          payload.replace(\"Ö\", String(char(153))); //Ö\r\n          payload.replace(\"ß\", String(char(224))); //ß\r\n      \r\n          for(int i = 0; i < 20; i++){\r\n            while(1){\r\n              int first_bracket = payload.indexOf('>');         \r\n              if(first_bracket < 0){\r\n                break;\r\n              }\r\n              else if(payload.substring(first_bracket-5, first_bracket) == \"title\"){\r\n                String headline = payload.substring(first_bracket+1, first_bracket+80);\r\n                headline = headline.substring(0, headline.indexOf('<'));\r\n                display.print(headline);\r\n                payload = payload.substring(first_bracket+1);\r\n                display.refresh();\r\n                break;\r\n              }\r\n              payload = payload.substring(first_bracket+1);\r\n            }\r\n          }\r\n          \r\n        } \r\n      else {\r\n        Serial.println(\"Error on HTTP request\");\r\n      }    \r\n   \r\n      http.end(); //Free the resources\r\n      WiFi.disconnect();\r\n      WiFi.mode(WIFI_OFF);\r\n      delay(200);\r\n      \r\n    }\r\n    else{\r\n      display.print(\"Connection failed!\\n\");\r\n    }\r\n    \r\n    \r\n  }\r\n\r\n\r\n  display.setFont();\r\n  drawTaskBar();\r\n  display.refresh();\r\n\r\n  firstRun = false;\r\n\r\n  if(buttonA.wasPressed()){\r\n    currentPage = 0; // back to menu\r\n    firstRun = true;\r\n  }\r\n  \r\n  buttonA.read();\r\n  buttonB.read();\r\n}\r\n"
  },
  {
    "path": "Memo/Paint.ino",
    "content": "\r\n\r\nvoid drawPaint(){\r\n  \r\n  static boolean firstRun = true;\r\n  static boolean drawColor = BLACK;\r\n  static int brushSize = 7; //must be even number\r\n  boolean pointerArea[brushSize][brushSize];\r\n\r\n  if(firstRun == true){\r\n    display.fillScreen(WHITE);\r\n    //display.drawBitmap(0, 15, wallpaper, 400, 225, BLACK);\r\n    sensX = 0.0022;\r\n    sensY = 0.0022;\r\n    mouseX = WIDTH/2;\r\n    mouseY = HEIGHT/2;\r\n    delay(200); //don't draw accidentally\r\n    buttonB.read();\r\n    buttonC.read();\r\n  }\r\n\r\n  //save pointer background area\r\n  for(int k = 0; k < brushSize; k++){ //column y\r\n    for(int i = 0; i < brushSize; i++){ //row x   \r\n      int pAx = mouseX - brushSize/2 + i;\r\n      int pAy = mouseY  - brushSize/2 + k;   \r\n      if(pAx >= 0 && pAy >= 0)\r\n        pointerArea[i][k] = display.getPixel(pAx, pAy);\r\n    }\r\n  }\r\n\r\n  \r\n\r\n  display.fillCircle(mouseX, mouseY, float(brushSize)/2 - 0.5, !drawColor); // draw pointer\r\n  display.fillCircle(mouseX, mouseY, float(brushSize)/2 - 1.5, drawColor); // draw pointer\r\n\r\n  \r\n  drawTaskBar();\r\n\r\n  mpu.getRotation(&gx, &gy, &gz);\r\n  display.refresh();\r\n\r\n  //restore pointer background\r\n  for(int k = 0; k < brushSize; k++){ //column y\r\n      for(int i = 0; i < brushSize; i++){ //row x\r\n        int pAx = mouseX - brushSize/2 + i;\r\n        int pAy = mouseY  - brushSize/2 + k;\r\n        if(pAx >= 0 && pAy >= 0)          \r\n          display.drawPixel(pAx, pAy, pointerArea[i][k]);\r\n    }\r\n  }\r\n    \r\n  if(buttonB.isPressed() || buttonC.isPressed()){//draw over screen\r\n    display.fillCircle(mouseX, mouseY, brushSize/2, drawColor); // draw pointer\r\n  }\r\n  \r\n  firstRun = false;\r\n\r\n  if(buttonUp.isPressed()){\r\n    if(brushSize < 35) brushSize += 1;\r\n  }\r\n  \r\n  if(buttonDown.isPressed()){\r\n    if(brushSize > 5) brushSize -= 1;\r\n  }\r\n  \r\n  if(buttonLeft.wasPressed() || buttonRight.wasPressed()){\r\n    drawColor = !drawColor;\r\n  }\r\n\r\n  if(buttonA.wasPressed()){\r\n    currentPage = 0; // back to menu\r\n    firstRun = true;\r\n  }\r\n\r\n  if(buttonShoulder.isPressed()){\r\n    mouseX += gx*sensX;\r\n    mouseY += gy*sensY;\r\n    mouseX = constrain(mouseX, 0, WIDTH);\r\n    mouseY = constrain(mouseY, 0, HEIGHT);\r\n  }\r\n  \r\n  buttonA.read();\r\n  buttonB.read();\r\n  buttonC.read();\r\n  buttonUp.read();\r\n  buttonLeft.read();\r\n  buttonRight.read();\r\n  buttonDown.read();\r\n  buttonShoulder.read();\r\n}\r\n"
  },
  {
    "path": "Memo/bmp.h",
    "content": "// 'Bluetooth_bmp', 6x12px\r\nconst unsigned char bluetooth_bmp [] PROGMEM = {\r\n  0x20, 0x30, 0x28, 0xa4, 0x68, 0x30, 0x30, 0x68, 0xa4, 0x28, 0x30, 0x20\r\n};\r\n// 'calc_bmp', 48x48px\r\nconst unsigned char calc_bmp [] PROGMEM = {\r\n  0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, \r\n  0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, \r\n  0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xe3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe3, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xe3, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x00, 0x3f, 0xf0, 0x01, 0xff, 0xfe, 0x00, \r\n  0x3f, 0xf0, 0x01, 0xff, 0xfe, 0x00, 0x3f, 0xf0, 0x01, 0xff, 0xff, 0xe3, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xe3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe3, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xbe, \r\n  0xff, 0xff, 0xbf, 0xff, 0xff, 0x1c, 0x7f, 0xff, 0x1f, 0xff, 0xff, 0x08, 0x7f, 0xff, 0xbf, 0xff, \r\n  0xff, 0x80, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc1, 0xff, 0xf0, 0x01, 0xff, 0xff, 0xc1, 0xff, 0xf0, \r\n  0x01, 0xff, 0xff, 0x80, 0xff, 0xf0, 0x01, 0xff, 0xff, 0x08, 0x7f, 0xff, 0xff, 0xff, 0xff, 0x1c, \r\n  0x7f, 0xff, 0xbf, 0xff, 0xff, 0xbe, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xbf, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, \r\n  0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0\r\n};\r\n// 'clock_bmp', 48x48px\r\nconst unsigned char clock_bmp [] PROGMEM = {\r\n  0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, \r\n  0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, \r\n  0xe0, 0x0f, 0xff, 0xfe, 0xff, 0xff, 0x00, 0x01, 0xff, 0xff, 0xff, 0xfc, 0x00, 0x00, 0x7f, 0xff, \r\n  0xff, 0xf8, 0x0f, 0xe0, 0x1f, 0xff, 0xff, 0xf0, 0x7f, 0xfc, 0x0f, 0xff, 0xff, 0xe1, 0xff, 0xff, \r\n  0x07, 0xff, 0xff, 0xc3, 0xff, 0xff, 0xc3, 0xff, 0xff, 0x87, 0xff, 0xff, 0xe1, 0xff, 0xff, 0x0f, \r\n  0xff, 0xff, 0xf0, 0xff, 0xff, 0x1f, 0xfe, 0x7f, 0xf8, 0xff, 0xfe, 0x3f, 0xfe, 0x7f, 0xf8, 0x7f, \r\n  0xfe, 0x3f, 0xfe, 0x7f, 0xfc, 0x7f, 0xfc, 0x7f, 0xfe, 0x7f, 0xfc, 0x3f, 0xfc, 0x7f, 0xfe, 0x7f, \r\n  0xfe, 0x3f, 0xfc, 0x7f, 0xfe, 0x7f, 0xfe, 0x3f, 0xf8, 0x7f, 0xfe, 0x7f, 0xfe, 0x1f, 0xf8, 0xff, \r\n  0xfe, 0x7f, 0xff, 0x1f, 0xf8, 0xff, 0xfe, 0x7f, 0xff, 0x1f, 0xf8, 0xff, 0xfe, 0x7f, 0xff, 0x1f, \r\n  0xf8, 0xff, 0xfe, 0x7f, 0xff, 0x1f, 0xf8, 0xff, 0xfe, 0x3f, 0xff, 0x1f, 0xf8, 0xff, 0xff, 0x1f, \r\n  0xff, 0x1f, 0xf8, 0xff, 0xff, 0x8f, 0xff, 0x1f, 0xf8, 0x7f, 0xff, 0xc7, 0xfe, 0x1f, 0xfc, 0x7f, \r\n  0xff, 0xe3, 0xfe, 0x3f, 0xfc, 0x7f, 0xff, 0xf1, 0xfe, 0x3f, 0xfc, 0x3f, 0xff, 0xf9, 0xfc, 0x3f, \r\n  0xfe, 0x3f, 0xff, 0xff, 0xfc, 0x7f, 0xfe, 0x3f, 0xff, 0xff, 0xf8, 0x7f, 0xfe, 0x1f, 0xff, 0xff, \r\n  0xf0, 0xff, 0xff, 0x0f, 0xff, 0xff, 0xf1, 0xff, 0xff, 0x87, 0xff, 0xff, 0xc1, 0xff, 0xff, 0xc3, \r\n  0xff, 0xff, 0x83, 0xff, 0xff, 0xe0, 0xff, 0xff, 0x07, 0xff, 0xff, 0xf0, 0x3f, 0xfc, 0x0f, 0xff, \r\n  0xff, 0xf8, 0x03, 0xc0, 0x3f, 0xff, 0xff, 0xfe, 0x00, 0x00, 0x7f, 0xff, 0x7f, 0xff, 0x80, 0x03, \r\n  0xff, 0xfe, 0x7f, 0xff, 0xf8, 0x3f, 0xff, 0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0\r\n};\r\n// 'draw_bmp', 48x48px\r\nconst unsigned char draw_bmp [] PROGMEM = {\r\n  0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, \r\n  0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, \r\n  0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, \r\n  0xff, 0xff, 0xff, 0xff, 0xfc, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, \r\n  0xf0, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0x81, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0x03, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x07, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x07, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xe0, \r\n  0x3f, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x7f, 0xff, 0xff, 0xff, 0xff, 0x80, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0x01, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x03, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x07, 0xff, 0xff, \r\n  0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x3f, \r\n  0xff, 0xff, 0xff, 0xff, 0xc0, 0x7f, 0xff, 0xff, 0xff, 0xff, 0x80, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0x83, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7, 0xff, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0x80, 0x7f, 0xff, 0xff, 0xff, 0xff, 0x80, 0x7f, 0xff, 0xff, 0xff, 0xff, 0x80, 0x3f, 0xff, \r\n  0xff, 0xff, 0xff, 0x80, 0x3f, 0xff, 0xff, 0xff, 0xff, 0x80, 0x3f, 0xff, 0xff, 0xff, 0xff, 0x80, \r\n  0x7f, 0xff, 0xff, 0xff, 0xff, 0x00, 0x7f, 0xff, 0xff, 0xff, 0xfe, 0x00, 0xff, 0xff, 0xff, 0xff, \r\n  0xfc, 0x03, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x0f, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, \r\n  0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0\r\n};\r\n// 'hackaday_bmp', 48x48px\r\nconst unsigned char hackaday_bmp [] PROGMEM = {\r\n  0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, \r\n  0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, \r\n  0xff, 0xff, 0xff, 0xfe, 0xff, 0x9f, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xc7, 0xff, 0xff, 0xf0, 0xff, \r\n  0xff, 0xe3, 0xff, 0xff, 0xe1, 0xff, 0xff, 0xf1, 0xff, 0xff, 0xe3, 0xff, 0xff, 0xe1, 0xff, 0xff, \r\n  0xe1, 0xff, 0xfb, 0xc1, 0xff, 0xff, 0xc1, 0xef, 0xf8, 0x81, 0xff, 0xff, 0xc0, 0xcf, 0xfc, 0x00, \r\n  0x7f, 0xff, 0x80, 0x0f, 0xfc, 0x00, 0x3f, 0xff, 0x00, 0x1f, 0xfe, 0x00, 0x18, 0x06, 0x00, 0x3f, \r\n  0xff, 0xf0, 0x20, 0x03, 0x02, 0xff, 0xff, 0xf8, 0x40, 0x01, 0x0f, 0xff, 0xff, 0xfc, 0xc0, 0x00, \r\n  0x9f, 0xff, 0xff, 0xfe, 0x80, 0x00, 0x7f, 0xff, 0xff, 0xff, 0x00, 0x00, 0x7f, 0xff, 0xff, 0xff, \r\n  0x00, 0x00, 0x3f, 0xff, 0xff, 0xff, 0x0c, 0x0c, 0x3f, 0xff, 0xff, 0xff, 0x1e, 0x1e, 0x3f, 0xff, \r\n  0xff, 0xff, 0x3e, 0x3f, 0x3f, 0xff, 0xff, 0xff, 0x3c, 0x1f, 0x3f, 0xff, 0xff, 0xff, 0x30, 0x06, \r\n  0x3f, 0xff, 0xff, 0xff, 0x10, 0x02, 0x3f, 0xff, 0xff, 0xff, 0x00, 0x80, 0x3f, 0xff, 0xff, 0xfe, \r\n  0x80, 0xc0, 0x5f, 0xff, 0xff, 0xfc, 0x80, 0x00, 0x4f, 0xff, 0xff, 0xf8, 0x40, 0x00, 0x87, 0xff, \r\n  0xff, 0x80, 0x60, 0x01, 0x00, 0x7f, 0xfe, 0x00, 0x20, 0x02, 0x00, 0x1f, 0xfc, 0x00, 0x60, 0x03, \r\n  0x00, 0x0f, 0xfc, 0x80, 0xf3, 0x33, 0x80, 0x0f, 0xf9, 0xc1, 0xff, 0xff, 0xc0, 0xcf, 0xfb, 0xe1, \r\n  0xff, 0xff, 0xc1, 0xff, 0xff, 0xf1, 0xff, 0xff, 0xe3, 0xff, 0xff, 0xf1, 0xff, 0xff, 0xe3, 0xff, \r\n  0xff, 0xc3, 0xff, 0xff, 0xf1, 0xff, 0xff, 0x87, 0xff, 0xff, 0xf8, 0xff, 0x7f, 0xff, 0xff, 0xff, \r\n  0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0\r\n};\r\n// 'keyboard_bmp', 48x48px\r\nconst unsigned char keyboard_bmp [] PROGMEM = {\r\n  0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, \r\n  0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, \r\n  0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xf8, 0x0e, 0x03, 0x80, 0xe0, 0x3f, 0xf8, 0x0e, 0x03, 0x80, 0xe0, 0x3f, 0xf8, 0x0e, \r\n  0x03, 0x80, 0xe0, 0x3f, 0xf8, 0x0e, 0x03, 0x80, 0xe0, 0x3f, 0xf8, 0x0e, 0x03, 0x80, 0xe0, 0x3f, \r\n  0xf8, 0x0e, 0x03, 0x80, 0xe0, 0x3f, 0xf8, 0x0e, 0x03, 0x80, 0xe0, 0x3f, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf8, 0x0e, \r\n  0x03, 0x80, 0xe0, 0x3f, 0xf8, 0x0e, 0x03, 0x80, 0xe0, 0x3f, 0xf8, 0x0e, 0x03, 0x80, 0xe0, 0x3f, \r\n  0xf8, 0x0e, 0x03, 0x80, 0xe0, 0x3f, 0xf8, 0x0e, 0x03, 0x80, 0xe0, 0x3f, 0xf8, 0x0e, 0x03, 0x80, \r\n  0xe0, 0x3f, 0xf8, 0x0e, 0x03, 0x80, 0xe0, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf8, 0x0e, 0x00, 0x00, 0xe0, 0x3f, \r\n  0xf8, 0x0e, 0x00, 0x00, 0xe0, 0x3f, 0xf8, 0x0e, 0x00, 0x00, 0xe0, 0x3f, 0xf8, 0x0e, 0x00, 0x00, \r\n  0xe0, 0x3f, 0xf8, 0x0e, 0x00, 0x00, 0xe0, 0x3f, 0xf8, 0x0e, 0x00, 0x00, 0xe0, 0x3f, 0xf8, 0x0e, \r\n  0x00, 0x00, 0xe0, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, \r\n  0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0\r\n};\r\n// 'lander_bmp', 48x48px\r\nconst unsigned char lander_bmp [] PROGMEM = {\r\n  0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, \r\n  0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, \r\n  0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x1f, \r\n  0xff, 0xff, 0xff, 0xfc, 0x78, 0x1f, 0xff, 0xff, 0xff, 0xf8, 0x1c, 0x1f, 0xff, 0xff, 0xff, 0xe0, \r\n  0x0e, 0x1f, 0xff, 0xff, 0xff, 0xc0, 0x07, 0x1f, 0xff, 0xff, 0xff, 0x80, 0x03, 0x9f, 0xff, 0xff, \r\n  0xff, 0x01, 0xc1, 0xbf, 0xff, 0xff, 0xfe, 0x03, 0xe0, 0xff, 0xff, 0xff, 0xfc, 0x03, 0xe0, 0xff, \r\n  0xff, 0xff, 0xf8, 0x03, 0xe0, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xe0, 0xff, 0xff, 0xff, 0xe0, 0x01, \r\n  0xc1, 0xff, 0xff, 0xf8, 0xe0, 0x00, 0x01, 0xff, 0xff, 0xf0, 0xc0, 0x00, 0x03, 0xff, 0xff, 0xe0, \r\n  0xc0, 0x00, 0x03, 0xff, 0xff, 0xc1, 0x80, 0x00, 0x07, 0xff, 0xff, 0x81, 0x80, 0x00, 0x0f, 0xff, \r\n  0xff, 0x01, 0x80, 0x00, 0x1f, 0xff, 0xfe, 0x03, 0x00, 0x00, 0x3f, 0xff, 0xfc, 0x03, 0x00, 0x00, \r\n  0x7f, 0xff, 0xfc, 0x03, 0x00, 0x00, 0xff, 0xff, 0xfc, 0x1f, 0x00, 0x03, 0xff, 0xff, 0xff, 0xff, \r\n  0x00, 0x07, 0xff, 0xff, 0xff, 0xff, 0x00, 0x1f, 0xff, 0xff, 0xff, 0xff, 0x80, 0xff, 0xff, 0xff, \r\n  0xff, 0xf9, 0xcf, 0xe3, 0xff, 0xff, 0xff, 0xf0, 0xff, 0x03, 0xff, 0xff, 0xff, 0xf0, 0xf8, 0x03, \r\n  0xff, 0xff, 0xff, 0xe1, 0xf8, 0x07, 0xff, 0xff, 0xff, 0xc3, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xc7, \r\n  0xf0, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x7f, 0xff, 0xff, \r\n  0xff, 0xff, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf1, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xf3, 0xff, \r\n  0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0\r\n};\r\n// 'level_bmp', 48x48px\r\nconst unsigned char level_bmp [] PROGMEM = {\r\n  0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, \r\n  0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, \r\n  0xff, 0xff, 0x8f, 0xfe, 0xff, 0xff, 0xff, 0xff, 0x07, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x03, 0xff, \r\n  0xff, 0xff, 0xff, 0xfc, 0x21, 0xff, 0xff, 0xff, 0xff, 0xf8, 0x70, 0xff, 0xff, 0xff, 0xff, 0xf0, \r\n  0xf8, 0x7f, 0xff, 0xff, 0xff, 0xe1, 0xfc, 0x3f, 0xff, 0xff, 0xff, 0xc3, 0xfe, 0x1f, 0xff, 0xff, \r\n  0xff, 0x87, 0xff, 0x1f, 0xff, 0xff, 0xff, 0x0f, 0xbe, 0x3f, 0xff, 0xff, 0xfe, 0x1f, 0x9c, 0x7f, \r\n  0xff, 0xff, 0xfc, 0x3f, 0xc8, 0xff, 0xff, 0xff, 0xf8, 0x7f, 0xe1, 0xff, 0xff, 0xff, 0xf0, 0xff, \r\n  0xe3, 0xff, 0xff, 0xff, 0xe1, 0xf3, 0xc7, 0xff, 0xff, 0xff, 0xc3, 0xf9, 0x8f, 0xff, 0xff, 0xff, \r\n  0x87, 0xfc, 0x1f, 0xff, 0xff, 0xff, 0x0f, 0xfe, 0x3f, 0xff, 0xff, 0xfe, 0x1f, 0xfc, 0x7f, 0xff, \r\n  0xff, 0xfc, 0x3e, 0x78, 0xff, 0xff, 0xff, 0xf8, 0x7f, 0x31, 0xff, 0xff, 0xff, 0xf0, 0xff, 0x83, \r\n  0xff, 0xff, 0xff, 0xe1, 0xff, 0xc7, 0xff, 0xff, 0xff, 0xc3, 0xef, 0x8f, 0xff, 0xff, 0xff, 0x87, \r\n  0xe7, 0x1f, 0xff, 0xff, 0xff, 0x0f, 0xf2, 0x3f, 0xff, 0xff, 0xfe, 0x1f, 0xf8, 0x7f, 0xff, 0xff, \r\n  0xfc, 0x3f, 0xf8, 0xff, 0xff, 0xff, 0xf8, 0x7c, 0xf1, 0xff, 0xff, 0xff, 0xf8, 0xfe, 0x63, 0xff, \r\n  0xff, 0xff, 0xf8, 0x7f, 0x07, 0xff, 0xff, 0xff, 0xfc, 0x3f, 0x8f, 0xff, 0xff, 0xff, 0xfe, 0x1f, \r\n  0x1f, 0xff, 0xff, 0xff, 0xff, 0x0e, 0x3f, 0xff, 0xff, 0xff, 0xff, 0x84, 0x7f, 0xff, 0xff, 0xff, \r\n  0xff, 0xc0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe1, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xf3, 0xff, 0xff, \r\n  0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0\r\n};\r\n// 'news_bmp', 48x48px\r\nconst unsigned char news_bmp [] PROGMEM = {\r\n  0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, \r\n  0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, \r\n  0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xff, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xff, 0x00, 0x00, 0x00, \r\n  0x0f, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc0, 0x7f, 0xff, 0x1f, 0xff, 0xff, 0xc0, 0x7f, 0xff, 0x18, \r\n  0x00, 0x00, 0xcc, 0x7f, 0xff, 0x18, 0x00, 0x00, 0xcc, 0x7f, 0xff, 0x1f, 0xff, 0xff, 0xcc, 0x7f, \r\n  0xff, 0x1f, 0xff, 0xff, 0xcc, 0x7f, 0xff, 0x18, 0x06, 0x00, 0xcc, 0x7f, 0xff, 0x18, 0x06, 0x00, \r\n  0xcc, 0x7f, 0xff, 0x18, 0x07, 0xff, 0xcc, 0x7f, 0xff, 0x18, 0x07, 0xff, 0xcc, 0x7f, 0xff, 0x18, \r\n  0x06, 0x00, 0xcc, 0x7f, 0xff, 0x18, 0x06, 0x00, 0xcc, 0x7f, 0xff, 0x1f, 0xff, 0xff, 0xcc, 0x7f, \r\n  0xff, 0x1f, 0xff, 0xff, 0xcc, 0x7f, 0xff, 0x18, 0x00, 0x00, 0xcc, 0x7f, 0xff, 0x18, 0x00, 0x00, \r\n  0xcc, 0x7f, 0xff, 0x1f, 0xff, 0xff, 0xcc, 0x7f, 0xff, 0x1f, 0xff, 0xff, 0xcc, 0x7f, 0xff, 0x18, \r\n  0x06, 0x00, 0xcc, 0x7f, 0xff, 0x18, 0x06, 0x00, 0xcc, 0x7f, 0xff, 0x1f, 0xfe, 0x00, 0xcc, 0x7f, \r\n  0xff, 0x1f, 0xfe, 0x00, 0xcc, 0x7f, 0xff, 0x18, 0x06, 0x00, 0xcc, 0x7f, 0xff, 0x18, 0x06, 0x00, \r\n  0xcc, 0x7f, 0xff, 0x1f, 0xff, 0xff, 0xcc, 0x7f, 0xff, 0x1f, 0xff, 0xff, 0xcc, 0x7f, 0xff, 0x1f, \r\n  0xff, 0xff, 0xc4, 0x7f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0x80, 0x00, 0x00, 0x00, 0x7f, \r\n  0xff, 0xc0, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, \r\n  0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0\r\n};\r\n// 'opac_bmp', 48x48px\r\nconst unsigned char opac_bmp [] PROGMEM = {\r\n  0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, \r\n  0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, \r\n  0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xf0, 0x07, 0xff, 0x80, 0x7f, 0xff, 0xf0, 0x07, 0xff, 0x80, 0x7f, 0xff, 0xf0, 0x06, 0x01, 0x80, \r\n  0x7f, 0xff, 0xf1, 0xc6, 0x01, 0x8c, 0x60, 0x0f, 0xf1, 0xc6, 0x01, 0x8c, 0x60, 0x0f, 0xf1, 0xc6, \r\n  0x31, 0x8c, 0x60, 0x0f, 0xf1, 0xc6, 0x31, 0x8c, 0x63, 0xff, 0xf1, 0xc6, 0x31, 0x80, 0x63, 0xff, \r\n  0xf1, 0xc6, 0x01, 0x80, 0x63, 0xff, 0xf1, 0xc6, 0x01, 0x80, 0x63, 0xff, 0xf0, 0x06, 0x01, 0x8c, \r\n  0x63, 0xff, 0xf0, 0x06, 0x3f, 0x8c, 0x63, 0xff, 0xf0, 0x06, 0x3f, 0x8c, 0x63, 0xff, 0xff, 0xfe, \r\n  0x3f, 0x8c, 0x60, 0x0f, 0xff, 0xfe, 0x3f, 0xff, 0xe0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x0f, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, \r\n  0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0\r\n};\r\n// 'paint_bmp', 48x48px\r\nconst unsigned char paint_bmp [] PROGMEM = {\r\n  0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, \r\n  0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, \r\n  0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe3, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xc1, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0x00, 0x7f, 0xff, 0xff, 0xff, 0xff, 0x80, 0x7f, 0xff, 0xff, 0xff, 0xfc, 0xc0, 0x7f, 0xff, 0xff, \r\n  0xff, 0xf8, 0x60, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x31, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x1b, 0xff, \r\n  0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0x80, 0x0f, 0xff, 0xff, 0xff, 0xff, 0x00, \r\n  0x1f, 0xff, 0xff, 0xff, 0xfe, 0x00, 0x3f, 0xff, 0xff, 0xff, 0xfc, 0x00, 0x7f, 0xff, 0xff, 0xff, \r\n  0xf8, 0x00, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x01, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x03, 0xff, 0xff, \r\n  0xff, 0xff, 0xc0, 0x07, 0xff, 0xff, 0xff, 0xff, 0x80, 0x0f, 0xff, 0xff, 0xff, 0xff, 0x00, 0x1f, \r\n  0xff, 0xff, 0xff, 0xfe, 0x00, 0x3f, 0xff, 0xff, 0xff, 0xfc, 0x00, 0x7f, 0xff, 0xff, 0xff, 0xf8, \r\n  0x00, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x01, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x03, 0xff, 0xff, 0xff, \r\n  0xff, 0xc0, 0x07, 0xff, 0xff, 0xff, 0xff, 0x80, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xb0, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0x38, 0x3f, 0xff, 0xff, 0xff, 0xff, 0x7c, 0x7f, 0xff, 0xff, 0xff, 0xff, 0x7c, \r\n  0xff, 0xff, 0xff, 0xff, 0xfe, 0x71, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x07, 0xff, 0xff, 0xff, 0xff, \r\n  0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfd, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, \r\n  0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0\r\n};\r\n// 'settings_bmp', 48x48px\r\nconst unsigned char settings_bmp [] PROGMEM = {\r\n  0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x1f, 0xff, 0xff, 0xff, \r\n  0xff, 0xf8, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x7f, 0xff, \r\n  0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe1, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe1, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xe1, 0xff, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00, 0xff, 0xfc, 0x00, \r\n  0x00, 0x00, 0x00, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xe1, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xe1, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe1, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf8, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xf8, \r\n  0x7f, 0xff, 0xff, 0xff, 0xff, 0xf8, 0x7f, 0xff, 0xff, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00, 0xff, \r\n  0xfc, 0x00, 0x00, 0x00, 0x00, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xf8, 0x7f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xf8, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x3f, 0xff, \r\n  0xff, 0xff, 0xff, 0xfc, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x3f, 0xff, 0xfc, 0x00, 0x00, 0x00, \r\n  0x00, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, \r\n  0xff, 0xfc, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x3f, 0xff, \r\n  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xff, 0xff, \r\n  0xff, 0xfe, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xfc, 0x1f, 0xff, \r\n  0xff, 0xff, 0xff, 0xf8, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0\r\n};\r\n// 'select_bmp', 58x58px\r\nconst unsigned char select_bmp [] PROGMEM = {\r\n  0x01, 0xe0, 0x00, 0x00, 0x00, 0x01, 0xe0, 0x00, 0x07, 0xe0, 0x00, 0x00, 0x00, 0x01, 0xf8, 0x00, \r\n  0x0f, 0xe0, 0x00, 0x00, 0x00, 0x01, 0xfc, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, \r\n  0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x80, \r\n  0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x80, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xc0, \r\n  0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xc0, \r\n  0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r\n  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xc0, \r\n  0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xc0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xc0, \r\n  0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xc0, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x80, \r\n  0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x80, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x00, \r\n  0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0x0f, 0xe0, 0x00, 0x00, 0x00, 0x01, 0xfc, 0x00, \r\n  0x07, 0xe0, 0x00, 0x00, 0x00, 0x01, 0xf8, 0x00, 0x01, 0xe0, 0x00, 0x00, 0x00, 0x01, 0xe0, 0x00\r\n};\r\n// 'pointer', 17x25px\r\nconst unsigned char pointer [] PROGMEM = {\r\n  0x80, 0x00, 0x00, 0xc0, 0x00, 0x00, 0xe0, 0x00, 0x00, 0xf0, 0x00, 0x00, 0xf8, 0x00, 0x00, 0xfc, \r\n  0x00, 0x00, 0xfe, 0x00, 0x00, 0xff, 0x00, 0x00, 0xff, 0x80, 0x00, 0xff, 0xc0, 0x00, 0xff, 0xe0, \r\n  0x00, 0xff, 0xf0, 0x00, 0xff, 0xf8, 0x00, 0xff, 0xfc, 0x00, 0xff, 0xfe, 0x00, 0xff, 0xff, 0x00, \r\n  0xff, 0xff, 0x80, 0xff, 0xff, 0x80, 0xfc, 0x00, 0x00, 0xf8, 0x00, 0x00, 0xf8, 0x00, 0x00, 0xf0, \r\n  0x00, 0x00, 0xe0, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x80, 0x00, 0x00\r\n};\r\n"
  },
  {
    "path": "Memo/esp32-hal-spi.c",
    "content": "// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD\n//\n// Licensed under the Apache License, Version 2.0 (the \"License\");\n// you may not use this file except in compliance with the License.\n// You may obtain a copy of the License at\n\n//     http://www.apache.org/licenses/LICENSE-2.0\n//\n// Unless required by applicable law or agreed to in writing, software\n// distributed under the License is distributed on an \"AS IS\" BASIS,\n// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n// See the License for the specific language governing permissions and\n// limitations under the License.\n\n#include \"esp32-hal-spi.h\"\n#include \"esp32-hal.h\"\n#include \"freertos/FreeRTOS.h\"\n#include \"freertos/task.h\"\n#include \"freertos/semphr.h\"\n#include \"rom/ets_sys.h\"\n#include \"esp_attr.h\"\n#include \"esp_intr.h\"\n#include \"rom/gpio.h\"\n#include \"soc/spi_reg.h\"\n#include \"soc/spi_struct.h\"\n#include \"soc/io_mux_reg.h\"\n#include \"soc/gpio_sig_map.h\"\n#include \"soc/dport_reg.h\"\n#include \"soc/rtc.h\"\n\n#define SPI_CLK_IDX(p)  ((p==0)?SPICLK_OUT_IDX:((p==1)?SPICLK_OUT_IDX:((p==2)?HSPICLK_OUT_IDX:((p==3)?VSPICLK_OUT_IDX:0))))\n#define SPI_MISO_IDX(p) ((p==0)?SPIQ_OUT_IDX:((p==1)?SPIQ_OUT_IDX:((p==2)?HSPIQ_OUT_IDX:((p==3)?VSPIQ_OUT_IDX:0))))\n#define SPI_MOSI_IDX(p) ((p==0)?SPID_IN_IDX:((p==1)?SPID_IN_IDX:((p==2)?HSPID_IN_IDX:((p==3)?VSPID_IN_IDX:0))))\n\n#define SPI_SPI_SS_IDX(n)   ((n==0)?SPICS0_OUT_IDX:((n==1)?SPICS1_OUT_IDX:((n==2)?SPICS2_OUT_IDX:SPICS0_OUT_IDX)))\n#define SPI_HSPI_SS_IDX(n)   ((n==0)?HSPICS0_OUT_IDX:((n==1)?HSPICS1_OUT_IDX:((n==2)?HSPICS2_OUT_IDX:HSPICS0_OUT_IDX)))\n#define SPI_VSPI_SS_IDX(n)   ((n==0)?VSPICS0_OUT_IDX:((n==1)?VSPICS1_OUT_IDX:((n==2)?VSPICS2_OUT_IDX:VSPICS0_OUT_IDX)))\n#define SPI_SS_IDX(p, n)   ((p==0)?SPI_SPI_SS_IDX(n):((p==1)?SPI_SPI_SS_IDX(n):((p==2)?SPI_HSPI_SS_IDX(n):((p==3)?SPI_VSPI_SS_IDX(n):0))))\n\n#define SPI_INUM(u)        (2)\n#define SPI_INTR_SOURCE(u) ((u==0)?ETS_SPI0_INTR_SOURCE:((u==1)?ETS_SPI1_INTR_SOURCE:((u==2)?ETS_SPI2_INTR_SOURCE:((p==3)?ETS_SPI3_INTR_SOURCE:0))))\n\nstruct spi_struct_t {\n    spi_dev_t * dev;\n#if !CONFIG_DISABLE_HAL_LOCKS\n    xSemaphoreHandle lock;\n#endif\n    uint8_t num;\n};\n\n#if CONFIG_DISABLE_HAL_LOCKS\n#define SPI_MUTEX_LOCK()\n#define SPI_MUTEX_UNLOCK()\n\nstatic spi_t _spi_bus_array[4] = {\n    {(volatile spi_dev_t *)(DR_REG_SPI0_BASE), 0},\n    {(volatile spi_dev_t *)(DR_REG_SPI1_BASE), 1},\n    {(volatile spi_dev_t *)(DR_REG_SPI2_BASE), 2},\n    {(volatile spi_dev_t *)(DR_REG_SPI3_BASE), 3}\n};\n#else\n#define SPI_MUTEX_LOCK()    do {} while (xSemaphoreTake(spi->lock, portMAX_DELAY) != pdPASS)\n#define SPI_MUTEX_UNLOCK()  xSemaphoreGive(spi->lock)\n\nstatic spi_t _spi_bus_array[4] = {\n    {(volatile spi_dev_t *)(DR_REG_SPI0_BASE), NULL, 0},\n    {(volatile spi_dev_t *)(DR_REG_SPI1_BASE), NULL, 1},\n    {(volatile spi_dev_t *)(DR_REG_SPI2_BASE), NULL, 2},\n    {(volatile spi_dev_t *)(DR_REG_SPI3_BASE), NULL, 3}\n};\n#endif\n\nvoid spiAttachSCK(spi_t * spi, int8_t sck)\n{\n    if(!spi) {\n        return;\n    }\n    if(sck < 0) {\n        if(spi->num == HSPI) {\n            sck = 14;\n        } else if(spi->num == VSPI) {\n            sck = 18;\n        } else {\n            sck = 6;\n        }\n    }\n    pinMode(sck, OUTPUT);\n    pinMatrixOutAttach(sck, SPI_CLK_IDX(spi->num), false, false);\n}\n\nvoid spiAttachMISO(spi_t * spi, int8_t miso)\n{\n    if(!spi) {\n        return;\n    }\n    if(miso < 0) {\n        if(spi->num == HSPI) {\n            miso = 12;\n        } else if(spi->num == VSPI) {\n            miso = 19;\n        } else {\n            miso = 7;\n        }\n    }\n    //SPI_MUTEX_LOCK();\n    pinMode(miso, INPUT);\n    pinMatrixInAttach(miso, SPI_MISO_IDX(spi->num), false);\n    //SPI_MUTEX_UNLOCK();\n}\n\nvoid spiAttachMOSI(spi_t * spi, int8_t mosi)\n{\n    if(!spi) {\n        return;\n    }\n    if(mosi < 0) {\n        if(spi->num == HSPI) {\n            mosi = 13;\n        } else if(spi->num == VSPI) {\n            mosi = 23;\n        } else {\n            mosi = 8;\n        }\n    }\n    pinMode(mosi, OUTPUT);\n    pinMatrixOutAttach(mosi, SPI_MOSI_IDX(spi->num), false, false);\n}\n\nvoid spiDetachSCK(spi_t * spi, int8_t sck)\n{\n    if(!spi) {\n        return;\n    }\n    if(sck < 0) {\n        if(spi->num == HSPI) {\n            sck = 14;\n        } else if(spi->num == VSPI) {\n            sck = 18;\n        } else {\n            sck = 6;\n        }\n    }\n    pinMatrixOutDetach(sck, false, false);\n    pinMode(sck, INPUT);\n}\n\nvoid spiDetachMISO(spi_t * spi, int8_t miso)\n{\n    if(!spi) {\n        return;\n    }\n    if(miso < 0) {\n        if(spi->num == HSPI) {\n            miso = 12;\n        } else if(spi->num == VSPI) {\n            miso = 19;\n        } else {\n            miso = 7;\n        }\n    }\n    pinMatrixInDetach(SPI_MISO_IDX(spi->num), false, false);\n    pinMode(miso, INPUT);\n}\n\nvoid spiDetachMOSI(spi_t * spi, int8_t mosi)\n{\n    if(!spi) {\n        return;\n    }\n    if(mosi < 0) {\n        if(spi->num == HSPI) {\n            mosi = 13;\n        } else if(spi->num == VSPI) {\n            mosi = 23;\n        } else {\n            mosi = 8;\n        }\n    }\n    pinMatrixOutDetach(mosi, false, false);\n    pinMode(mosi, INPUT);\n}\n\nvoid spiAttachSS(spi_t * spi, uint8_t cs_num, int8_t ss)\n{\n    if(!spi) {\n        return;\n    }\n    if(cs_num > 2) {\n        return;\n    }\n    if(ss < 0) {\n        cs_num = 0;\n        if(spi->num == HSPI) {\n            ss = 15;\n        } else if(spi->num == VSPI) {\n            ss = 5;\n        } else {\n            ss = 11;\n        }\n    }\n    pinMode(ss, OUTPUT);\n    pinMatrixOutAttach(ss, SPI_SS_IDX(spi->num, cs_num), false, false);\n    spiEnableSSPins(spi, (1 << cs_num));\n}\n\nvoid spiDetachSS(spi_t * spi, int8_t ss)\n{\n    if(!spi) {\n        return;\n    }\n    if(ss < 0) {\n        if(spi->num == HSPI) {\n            ss = 15;\n        } else if(spi->num == VSPI) {\n            ss = 5;\n        } else {\n            ss = 11;\n        }\n    }\n    pinMatrixOutDetach(ss, false, false);\n    pinMode(ss, INPUT);\n}\n\nvoid spiEnableSSPins(spi_t * spi, uint8_t cs_mask)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->pin.val &= ~(cs_mask & SPI_CS_MASK_ALL);\n    //SPI_MUTEX_UNLOCK();\n}\n\nvoid spiDisableSSPins(spi_t * spi, uint8_t cs_mask)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->pin.val |= (cs_mask & SPI_CS_MASK_ALL);\n    //SPI_MUTEX_UNLOCK();\n}\n\nvoid spiSSEnable(spi_t * spi)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->user.cs_setup = 1;\n    spi->dev->user.cs_hold = 1;\n    //SPI_MUTEX_UNLOCK();\n}\n\nvoid spiSSDisable(spi_t * spi)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->user.cs_setup = 0;\n    spi->dev->user.cs_hold = 0;\n    //SPI_MUTEX_UNLOCK();\n}\n\nvoid spiSSSet(spi_t * spi)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->pin.cs_keep_active = 1;\n    //SPI_MUTEX_UNLOCK();\n}\n\nvoid spiSSClear(spi_t * spi)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->pin.cs_keep_active = 0;\n    //SPI_MUTEX_UNLOCK();\n}\n\nuint32_t spiGetClockDiv(spi_t * spi)\n{\n    if(!spi) {\n        return 0;\n    }\n    return spi->dev->clock.val;\n}\n\nvoid spiSetClockDiv(spi_t * spi, uint32_t clockDiv)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->clock.val = clockDiv;\n    //SPI_MUTEX_UNLOCK();\n}\n\nuint8_t spiGetDataMode(spi_t * spi)\n{\n    if(!spi) {\n        return 0;\n    }\n    bool idleEdge = spi->dev->pin.ck_idle_edge;\n    bool outEdge = spi->dev->user.ck_out_edge;\n    if(idleEdge) {\n        if(outEdge) {\n            return SPI_MODE2;\n        }\n        return SPI_MODE3;\n    }\n    if(outEdge) {\n        return SPI_MODE1;\n    }\n    return SPI_MODE0;\n}\n\nvoid spiSetDataMode(spi_t * spi, uint8_t dataMode)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    switch (dataMode) {\n    case SPI_MODE1:\n        spi->dev->pin.ck_idle_edge = 0;\n        spi->dev->user.ck_out_edge = 1;\n        break;\n    case SPI_MODE2:\n        spi->dev->pin.ck_idle_edge = 1;\n        spi->dev->user.ck_out_edge = 1;\n        break;\n    case SPI_MODE3:\n        spi->dev->pin.ck_idle_edge = 1;\n        spi->dev->user.ck_out_edge = 0;\n        break;\n    case SPI_MODE0:\n    default:\n        spi->dev->pin.ck_idle_edge = 0;\n        spi->dev->user.ck_out_edge = 0;\n        break;\n    }\n    //SPI_MUTEX_UNLOCK();\n}\n\nuint8_t spiGetBitOrder(spi_t * spi)\n{\n    if(!spi) {\n        return 0;\n    }\n    return (spi->dev->ctrl.wr_bit_order | spi->dev->ctrl.rd_bit_order) == 0;\n}\n\nvoid spiSetBitOrder(spi_t * spi, uint8_t bitOrder)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    if (SPI_MSBFIRST == bitOrder) {\n        spi->dev->ctrl.wr_bit_order = 0;\n        spi->dev->ctrl.rd_bit_order = 0;\n    } else if (SPI_LSBFIRST == bitOrder) {\n        spi->dev->ctrl.wr_bit_order = 1;\n        spi->dev->ctrl.rd_bit_order = 1;\n    }\n    //SPI_MUTEX_UNLOCK();\n}\n\nstatic void _on_apb_change(void * arg, apb_change_ev_t ev_type, uint32_t old_apb, uint32_t new_apb)\n{\n    spi_t * spi = (spi_t *)arg;\n    if(ev_type == APB_BEFORE_CHANGE){\n        //SPI_MUTEX_LOCK();\n        while(spi->dev->cmd.usr);\n    } else {\n        spi->dev->clock.val = spiFrequencyToClockDiv(old_apb / ((spi->dev->clock.clkdiv_pre + 1) * (spi->dev->clock.clkcnt_n + 1)));\n        //SPI_MUTEX_UNLOCK();\n    }\n}\n\nvoid spiStopBus(spi_t * spi)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->slave.trans_done = 0;\n    spi->dev->slave.slave_mode = 0;\n    spi->dev->pin.val = 0;\n    spi->dev->user.val = 0;\n    spi->dev->user1.val = 0;\n    spi->dev->ctrl.val = 0;\n    spi->dev->ctrl1.val = 0;\n    spi->dev->ctrl2.val = 0;\n    spi->dev->clock.val = 0;\n    //SPI_MUTEX_UNLOCK();\n    removeApbChangeCallback(spi, _on_apb_change);\n}\n\nspi_t * spiStartBus(uint8_t spi_num, uint32_t clockDiv, uint8_t dataMode, uint8_t bitOrder)\n{\n    if(spi_num > 3){\n        return NULL;\n    }\n\n    spi_t * spi = &_spi_bus_array[spi_num];\n\n#if !CONFIG_DISABLE_HAL_LOCKS\n    if(spi->lock == NULL){\n        spi->lock = xSemaphoreCreateMutex();\n        if(spi->lock == NULL) {\n            return NULL;\n        }\n    }\n#endif\n\n    if(spi_num == HSPI) {\n        DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI_CLK_EN);\n        DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI_RST);\n    } else if(spi_num == VSPI) {\n        DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI_CLK_EN_2);\n        DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI_RST_2);\n    } else {\n        DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI_CLK_EN_1);\n        DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI_RST_1);\n    }\n\n    spiStopBus(spi);\n    spiSetDataMode(spi, dataMode);\n    spiSetBitOrder(spi, bitOrder);\n    spiSetClockDiv(spi, clockDiv);\n\n    //SPI_MUTEX_LOCK();\n    spi->dev->user.usr_mosi = 1;\n    spi->dev->user.usr_miso = 1;\n    spi->dev->user.doutdin = 1;\n\n    int i;\n    for(i=0; i<16; i++) {\n        spi->dev->data_buf[i] = 0x00000000;\n    }\n    //SPI_MUTEX_UNLOCK();\n\n    addApbChangeCallback(spi, _on_apb_change);\n    return spi;\n}\n\nvoid spiWaitReady(spi_t * spi)\n{\n    if(!spi) {\n        return;\n    }\n    while(spi->dev->cmd.usr);\n}\n\nvoid spiWrite(spi_t * spi, uint32_t *data, uint8_t len)\n{\n    if(!spi) {\n        return;\n    }\n    int i;\n    if(len > 16) {\n        len = 16;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = (len * 32) - 1;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 0;\n    for(i=0; i<len; i++) {\n        spi->dev->data_buf[i] = data[i];\n    }\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    //SPI_MUTEX_UNLOCK();\n}\n\nvoid spiTransfer(spi_t * spi, uint32_t *data, uint8_t len)\n{\n    if(!spi) {\n        return;\n    }\n    int i;\n    if(len > 16) {\n        len = 16;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = (len * 32) - 1;\n    spi->dev->miso_dlen.usr_miso_dbitlen = (len * 32) - 1;\n    for(i=0; i<len; i++) {\n        spi->dev->data_buf[i] = data[i];\n    }\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    for(i=0; i<len; i++) {\n        data[i] = spi->dev->data_buf[i];\n    }\n    //SPI_MUTEX_UNLOCK();\n}\n\nvoid spiWriteByte(spi_t * spi, uint8_t data)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 7;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 0;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    //SPI_MUTEX_UNLOCK();\n}\n\nuint8_t spiTransferByte(spi_t * spi, uint8_t data)\n{\n    if(!spi) {\n        return 0;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 7;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 7;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    data = spi->dev->data_buf[0] & 0xFF;\n    //SPI_MUTEX_UNLOCK();\n    return data;\n}\n\nuint32_t __spiTranslate24(uint32_t data)\n{\n    union {\n        uint32_t l;\n        uint8_t b[4];\n    } out;\n    out.l = data;\n    return out.b[2] | (out.b[1] << 8) | (out.b[0] << 16);\n}\n\nuint32_t __spiTranslate32(uint32_t data)\n{\n    union {\n        uint32_t l;\n        uint8_t b[4];\n    } out;\n    out.l = data;\n    return out.b[3] | (out.b[2] << 8) | (out.b[1] << 16) | (out.b[0] << 24);\n}\n\nvoid spiWriteWord(spi_t * spi, uint16_t data)\n{\n    if(!spi) {\n        return;\n    }\n    if(!spi->dev->ctrl.wr_bit_order){\n        data = (data >> 8) | (data << 8);\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 15;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 0;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    //SPI_MUTEX_UNLOCK();\n}\n\nuint16_t spiTransferWord(spi_t * spi, uint16_t data)\n{\n    if(!spi) {\n        return 0;\n    }\n    if(!spi->dev->ctrl.wr_bit_order){\n        data = (data >> 8) | (data << 8);\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 15;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 15;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    data = spi->dev->data_buf[0];\n    //SPI_MUTEX_UNLOCK();\n    if(!spi->dev->ctrl.rd_bit_order){\n        data = (data >> 8) | (data << 8);\n    }\n    return data;\n}\n\nvoid spiWriteLong(spi_t * spi, uint32_t data)\n{\n    if(!spi) {\n        return;\n    }\n    if(!spi->dev->ctrl.wr_bit_order){\n        data = __spiTranslate32(data);\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 31;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 0;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    //SPI_MUTEX_UNLOCK();\n}\n\nuint32_t spiTransferLong(spi_t * spi, uint32_t data)\n{\n    if(!spi) {\n        return 0;\n    }\n    if(!spi->dev->ctrl.wr_bit_order){\n        data = __spiTranslate32(data);\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 31;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 31;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    data = spi->dev->data_buf[0];\n    //SPI_MUTEX_UNLOCK();\n    if(!spi->dev->ctrl.rd_bit_order){\n        data = __spiTranslate32(data);\n    }\n    return data;\n}\n\nvoid __spiTransferBytes(spi_t * spi, uint8_t * data, uint8_t * out, uint32_t bytes)\n{\n    if(!spi) {\n        return;\n    }\n    int i;\n\n    if(bytes > 64) {\n        bytes = 64;\n    }\n\n    uint32_t words = (bytes + 3) / 4;//16 max\n\n    uint32_t wordsBuf[16] = {0,};\n    uint8_t * bytesBuf = (uint8_t *) wordsBuf;\n\n    if(data) {\n        memcpy(bytesBuf, data, bytes);//copy data to buffer\n    } else {\n        memset(bytesBuf, 0xFF, bytes);\n    }\n\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = ((bytes * 8) - 1);\n    spi->dev->miso_dlen.usr_miso_dbitlen = ((bytes * 8) - 1);\n\n    for(i=0; i<words; i++) {\n        spi->dev->data_buf[i] = wordsBuf[i];    //copy buffer to spi fifo\n    }\n\n    spi->dev->cmd.usr = 1;\n\n    while(spi->dev->cmd.usr);\n\n    if(out) {\n        for(i=0; i<words; i++) {\n            wordsBuf[i] = spi->dev->data_buf[i];//copy spi fifo to buffer\n        }\n        memcpy(out, bytesBuf, bytes);//copy buffer to output\n    }\n}\n\nvoid spiTransferBytes(spi_t * spi, uint8_t * data, uint8_t * out, uint32_t size)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    while(size) {\n        if(size > 64) {\n            __spiTransferBytes(spi, data, out, 64);\n            size -= 64;\n            if(data) {\n                data += 64;\n            }\n            if(out) {\n                out += 64;\n            }\n        } else {\n            __spiTransferBytes(spi, data, out, size);\n            size = 0;\n        }\n    }\n    //SPI_MUTEX_UNLOCK();\n}\n\nvoid spiTransferBits(spi_t * spi, uint32_t data, uint32_t * out, uint8_t bits)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    spiTransferBitsNL(spi, data, out, bits);\n    //SPI_MUTEX_UNLOCK();\n}\n\n/*\n * Manual Lock Management\n * */\n\n#define MSB_32_SET(var, val) { uint8_t * d = (uint8_t *)&(val); (var) = d[3] | (d[2] << 8) | (d[1] << 16) | (d[0] << 24); }\n#define MSB_24_SET(var, val) { uint8_t * d = (uint8_t *)&(val); (var) = d[2] | (d[1] << 8) | (d[0] << 16); }\n#define MSB_16_SET(var, val) { (var) = (((val) & 0xFF00) >> 8) | (((val) & 0xFF) << 8); }\n#define MSB_PIX_SET(var, val) { uint8_t * d = (uint8_t *)&(val); (var) = d[1] | (d[0] << 8) | (d[3] << 16) | (d[2] << 24); }\n\nvoid spiTransaction(spi_t * spi, uint32_t clockDiv, uint8_t dataMode, uint8_t bitOrder)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n    spi->dev->clock.val = clockDiv;\n    switch (dataMode) {\n        case SPI_MODE1:\n            spi->dev->pin.ck_idle_edge = 0;\n            spi->dev->user.ck_out_edge = 1;\n            break;\n        case SPI_MODE2:\n            spi->dev->pin.ck_idle_edge = 1;\n            spi->dev->user.ck_out_edge = 1;\n            break;\n        case SPI_MODE3:\n            spi->dev->pin.ck_idle_edge = 1;\n            spi->dev->user.ck_out_edge = 0;\n            break;\n        case SPI_MODE0:\n        default:\n            spi->dev->pin.ck_idle_edge = 0;\n            spi->dev->user.ck_out_edge = 0;\n            break;\n    }\n    if (SPI_MSBFIRST == bitOrder) {\n        spi->dev->ctrl.wr_bit_order = 0;\n        spi->dev->ctrl.rd_bit_order = 0;\n    } else if (SPI_LSBFIRST == bitOrder) {\n        spi->dev->ctrl.wr_bit_order = 1;\n        spi->dev->ctrl.rd_bit_order = 1;\n    }\n}\n\nvoid spiSimpleTransaction(spi_t * spi)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_LOCK();\n}\n\nvoid spiEndTransaction(spi_t * spi)\n{\n    if(!spi) {\n        return;\n    }\n    //SPI_MUTEX_UNLOCK();\n}\n\nvoid IRAM_ATTR spiWriteByteNL(spi_t * spi, uint8_t data)\n{\n    if(!spi) {\n        return;\n    }\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 7;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 0;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n}\n\nuint8_t spiTransferByteNL(spi_t * spi, uint8_t data)\n{\n    if(!spi) {\n        return 0;\n    }\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 7;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 7;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    data = spi->dev->data_buf[0] & 0xFF;\n    return data;\n}\n\nvoid IRAM_ATTR spiWriteShortNL(spi_t * spi, uint16_t data)\n{\n    if(!spi) {\n        return;\n    }\n    if(!spi->dev->ctrl.wr_bit_order){\n        MSB_16_SET(data, data);\n    }\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 15;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 0;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n}\n\nuint16_t spiTransferShortNL(spi_t * spi, uint16_t data)\n{\n    if(!spi) {\n        return 0;\n    }\n    if(!spi->dev->ctrl.wr_bit_order){\n        MSB_16_SET(data, data);\n    }\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 15;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 15;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    data = spi->dev->data_buf[0] & 0xFFFF;\n    if(!spi->dev->ctrl.rd_bit_order){\n        MSB_16_SET(data, data);\n    }\n    return data;\n}\n\nvoid IRAM_ATTR spiWriteLongNL(spi_t * spi, uint32_t data)\n{\n    if(!spi) {\n        return;\n    }\n    if(!spi->dev->ctrl.wr_bit_order){\n        MSB_32_SET(data, data);\n    }\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 31;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 0;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n}\n\nuint32_t spiTransferLongNL(spi_t * spi, uint32_t data)\n{\n    if(!spi) {\n        return 0;\n    }\n    if(!spi->dev->ctrl.wr_bit_order){\n        MSB_32_SET(data, data);\n    }\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = 31;\n    spi->dev->miso_dlen.usr_miso_dbitlen = 31;\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    data = spi->dev->data_buf[0];\n    if(!spi->dev->ctrl.rd_bit_order){\n        MSB_32_SET(data, data);\n    }\n    return data;\n}\n\nvoid spiWriteNL(spi_t * spi, const void * data_in, size_t len){\n    size_t longs = len >> 2;\n    if(len & 3){\n        longs++;\n    }\n    uint32_t * data = (uint32_t*)data_in;\n    size_t c_len = 0, c_longs = 0;\n\n    while(len){\n        c_len = (len>64)?64:len;\n        c_longs = (longs > 16)?16:longs;\n\n        spi->dev->mosi_dlen.usr_mosi_dbitlen = (c_len*8)-1;\n        spi->dev->miso_dlen.usr_miso_dbitlen = 0;\n        for (int i=0; i<c_longs; i++) {\n            spi->dev->data_buf[i] = data[i];\n        }\n        spi->dev->cmd.usr = 1;\n        while(spi->dev->cmd.usr);\n\n        data += c_longs;\n        longs -= c_longs;\n        len -= c_len;\n    }\n}\n\nvoid spiTransferBytesNL(spi_t * spi, const void * data_in, uint8_t * data_out, size_t len){\n    if(!spi) {\n        return;\n    }\n    size_t longs = len >> 2;\n    if(len & 3){\n        longs++;\n    }\n    uint32_t * data = (uint32_t*)data_in;\n    uint32_t * result = (uint32_t*)data_out;\n    size_t c_len = 0, c_longs = 0;\n\n    while(len){\n        c_len = (len>64)?64:len;\n        c_longs = (longs > 16)?16:longs;\n\n        spi->dev->mosi_dlen.usr_mosi_dbitlen = (c_len*8)-1;\n        spi->dev->miso_dlen.usr_miso_dbitlen = (c_len*8)-1;\n        if(data){\n            for (int i=0; i<c_longs; i++) {\n                spi->dev->data_buf[i] = data[i];\n            }\n        } else {\n            for (int i=0; i<c_longs; i++) {\n                spi->dev->data_buf[i] = 0xFFFFFFFF;\n            }\n        }\n        spi->dev->cmd.usr = 1;\n        while(spi->dev->cmd.usr);\n        if(result){\n            for (int i=0; i<c_longs; i++) {\n                result[i] = spi->dev->data_buf[i];\n            }\n        }\n        if(data){\n            data += c_longs;\n        }\n        if(result){\n            result += c_longs;\n        }\n        longs -= c_longs;\n        len -= c_len;\n    }\n}\n\nvoid spiTransferBitsNL(spi_t * spi, uint32_t data, uint32_t * out, uint8_t bits)\n{\n    if(!spi) {\n        return;\n    }\n\n    if(bits > 32) {\n        bits = 32;\n    }\n    uint32_t bytes = (bits + 7) / 8;//64 max\n    uint32_t mask = (((uint64_t)1 << bits) - 1) & 0xFFFFFFFF;\n    data = data & mask;\n    if(!spi->dev->ctrl.wr_bit_order){\n        if(bytes == 2) {\n            MSB_16_SET(data, data);\n        } else if(bytes == 3) {\n            MSB_24_SET(data, data);\n        } else {\n            MSB_32_SET(data, data);\n        }\n    }\n\n    spi->dev->mosi_dlen.usr_mosi_dbitlen = (bits - 1);\n    spi->dev->miso_dlen.usr_miso_dbitlen = (bits - 1);\n    spi->dev->data_buf[0] = data;\n    spi->dev->cmd.usr = 1;\n    while(spi->dev->cmd.usr);\n    data = spi->dev->data_buf[0];\n    if(out) {\n        *out = data;\n        if(!spi->dev->ctrl.rd_bit_order){\n            if(bytes == 2) {\n                MSB_16_SET(*out, data);\n            } else if(bytes == 3) {\n                MSB_24_SET(*out, data);\n            } else {\n                MSB_32_SET(*out, data);\n            }\n        }\n    }\n}\n\nvoid IRAM_ATTR spiWritePixelsNL(spi_t * spi, const void * data_in, size_t len){\n    size_t longs = len >> 2;\n    if(len & 3){\n        longs++;\n    }\n    bool msb = !spi->dev->ctrl.wr_bit_order;\n    uint32_t * data = (uint32_t*)data_in;\n    size_t c_len = 0, c_longs = 0, l_bytes = 0;\n\n    while(len){\n        c_len = (len>64)?64:len;\n        c_longs = (longs > 16)?16:longs;\n        l_bytes = (c_len & 3);\n\n        spi->dev->mosi_dlen.usr_mosi_dbitlen = (c_len*8)-1;\n        spi->dev->miso_dlen.usr_miso_dbitlen = 0;\n        for (int i=0; i<c_longs; i++) {\n            if(msb){\n                if(l_bytes && i == (c_longs - 1)){\n                    if(l_bytes == 2){\n                        MSB_16_SET(spi->dev->data_buf[i], data[i]);\n                    } else {\n                        spi->dev->data_buf[i] = data[i] & 0xFF;\n                    }\n                } else {\n                    MSB_PIX_SET(spi->dev->data_buf[i], data[i]);\n                }\n            } else {\n                spi->dev->data_buf[i] = data[i];\n            }\n        }\n        spi->dev->cmd.usr = 1;\n        while(spi->dev->cmd.usr);\n\n        data += c_longs;\n        longs -= c_longs;\n        len -= c_len;\n    }\n}\n\n\n\n/*\n * Clock Calculators\n *\n * */\n\ntypedef union {\n    uint32_t value;\n    struct {\n            uint32_t clkcnt_l:       6;                     /*it must be equal to spi_clkcnt_N.*/\n            uint32_t clkcnt_h:       6;                     /*it must be floor((spi_clkcnt_N+1)/2-1).*/\n            uint32_t clkcnt_n:       6;                     /*it is the divider of spi_clk. So spi_clk frequency is system/(spi_clkdiv_pre+1)/(spi_clkcnt_N+1)*/\n            uint32_t clkdiv_pre:    13;                     /*it is pre-divider of spi_clk.*/\n            uint32_t clk_equ_sysclk: 1;                     /*1: spi_clk is eqaul to system 0: spi_clk is divided from system clock.*/\n    };\n} spiClk_t;\n\n#define ClkRegToFreq(reg) (apb_freq / (((reg)->clkdiv_pre + 1) * ((reg)->clkcnt_n + 1)))\n\nuint32_t spiClockDivToFrequency(uint32_t clockDiv)\n{\n    uint32_t apb_freq = getApbFrequency();\n    spiClk_t reg = { clockDiv };\n    return ClkRegToFreq(&reg);\n}\n\nuint32_t spiFrequencyToClockDiv(uint32_t freq)\n{\n    uint32_t apb_freq = getApbFrequency();\n\n    if(freq >= apb_freq) {\n        return SPI_CLK_EQU_SYSCLK;\n    }\n\n    const spiClk_t minFreqReg = { 0x7FFFF000 };\n    uint32_t minFreq = ClkRegToFreq((spiClk_t*) &minFreqReg);\n    if(freq < minFreq) {\n        return minFreqReg.value;\n    }\n\n    uint8_t calN = 1;\n    spiClk_t bestReg = { 0 };\n    int32_t bestFreq = 0;\n\n    while(calN <= 0x3F) {\n        spiClk_t reg = { 0 };\n        int32_t calFreq;\n        int32_t calPre;\n        int8_t calPreVari = -2;\n\n        reg.clkcnt_n = calN;\n\n        while(calPreVari++ <= 1) {\n            calPre = (((apb_freq / (reg.clkcnt_n + 1)) / freq) - 1) + calPreVari;\n            if(calPre > 0x1FFF) {\n                reg.clkdiv_pre = 0x1FFF;\n            } else if(calPre <= 0) {\n                reg.clkdiv_pre = 0;\n            } else {\n                reg.clkdiv_pre = calPre;\n            }\n            reg.clkcnt_l = ((reg.clkcnt_n + 1) / 2);\n            calFreq = ClkRegToFreq(&reg);\n            if(calFreq == (int32_t) freq) {\n                memcpy(&bestReg, &reg, sizeof(bestReg));\n                break;\n            } else if(calFreq < (int32_t) freq) {\n                if(abs(freq - calFreq) < abs(freq - bestFreq)) {\n                    bestFreq = calFreq;\n                    memcpy(&bestReg, &reg, sizeof(bestReg));\n                }\n            }\n        }\n        if(calFreq == (int32_t) freq) {\n            break;\n        }\n        calN++;\n    }\n    return bestReg.value;\n}\n\n"
  },
  {
    "path": "Memo/keyboardDemo.ino",
    "content": "int keybXY[26][2] = {{  20, 140}, //'Q'\r\n                       {  60, 140}, //'W'\r\n                       { 100, 140}, //'E'\r\n                       { 140, 140}, //'R'\r\n                       { 180, 140}, //'T'\r\n                       { 220, 140}, //'Z'\r\n                       { 260, 140}, //'U'\r\n                       { 300, 140}, //'I'\r\n                       { 340, 140}, //'O'\r\n                       { 380, 140}, //'P' ---\r\n                       {  40, 170}, //'A'\r\n                       {  80, 170}, //'S'\r\n                       { 120, 170}, //'D'\r\n                       { 160, 170}, //'F'\r\n                       { 200, 170}, //'G'\r\n                       { 240, 170}, //'H'\r\n                       { 280, 170}, //'J'\r\n                       { 320, 170}, //'K'\r\n                       { 360, 170}, //'L' ---\r\n                       {  60, 200}, //'Y'\r\n                       { 100, 200}, //'X'\r\n                       { 140, 200}, //'C'\r\n                       { 180, 200}, //'V'\r\n                       { 220, 200}, //'B'\r\n                       { 260, 200}, //'N'\r\n                       { 300, 200}, //'M'\r\n                       };\r\n\r\nchar keybChar[27] = {'Q', 'W', 'E', 'R', 'T', 'Z', 'U', 'I', 'O', 'P',\r\n                         'A', 'S', 'D', 'F', 'G', 'H', 'J', 'K', 'L',\r\n                           'Y', 'X', 'C', 'V', 'B', 'N', 'M', ' ' };\r\n\r\nvoid drawKeyboardDemo(){\r\n  \r\n  static boolean firstRun = true;\r\n  static String textString = \"\";\r\n\r\n  if(firstRun == true){\r\n    sensX = 0.0028;\r\n    sensY = 0.0028;\r\n    mouseX = WIDTH/2;\r\n    mouseY = HEIGHT/2;\r\n    display.fillScreen(BLACK);\r\n    textString = \"\";\r\n  }\r\n\r\n  display.fillScreen(BLACK);\r\n  display.setFont();\r\n  display.setTextSize(2);\r\n  display.setTextColor(WHITE);\r\n  display.setCursor(10,40);\r\n  //show cursor blinking at 2Hz\r\n  if(millis()/500%2){\r\n    textString += '_';\r\n    display.println(textString);\r\n    textString.remove(textString.length()-1);\r\n  }\r\n  else display.println(textString);\r\n  \r\n\r\n  int mouseOverKey;\r\n\r\n  mouseOverKey = -1;\r\n  for(int i = 0; i < 26; i++){\r\n    boolean keyColor = WHITE;    \r\n    if(isAboveKey(i)){\r\n      mouseOverKey = i;\r\n      keyColor = BLACK;\r\n      display.fillCircle(keybXY[i][0]+5, keybXY[i][1]+7, 18, WHITE);\r\n    }\r\n    \r\n    display.drawChar(keybXY[i][0], keybXY[i][1], keybChar[i], keyColor, BLACK, 2);\r\n  }\r\n  if(mouseY > 216){\r\n    mouseOverKey = 27; //space\r\n    display.fillRect(WIDTH/2-100, HEIGHT-16, 200, 20, WHITE);\r\n  }\r\n\r\n  \r\n  display.drawBitmap(mouseX, mouseY, pointer, 17, 25, WHITE);\r\n  \r\n  mpu.getRotation(&gx, &gy, &gz);\r\n  \r\n  drawTaskBar();\r\n  int refreshtime = millis();\r\n  display.refresh();\r\n  refreshtime = millis() - refreshtime;\r\n  Serial.print(\"refresh: \");\r\n  Serial.print(refreshtime);\r\n  Serial.print(\"  \");\r\n  \r\n  firstRun = false;\r\n\r\n  if((buttonC.wasPressed() || buttonB.wasPressed()) && mouseOverKey >= 0){//add character\r\n    textString += keybChar[mouseOverKey];\r\n  }\r\n\r\n  if(buttonLeft.wasPressed()){//backspace\r\n    textString.remove(textString.length()-1);\r\n  }\r\n\r\n  if(buttonA.wasPressed()){\r\n    currentPage = 0; // back to menu\r\n    firstRun = true;\r\n  }\r\n\r\n  if(buttonShoulder.isPressed()){\r\n    mouseX += gx*sensX;\r\n    mouseY += gy*sensY;\r\n    mouseX = constrain(mouseX, 0, WIDTH);\r\n    mouseY = constrain(mouseY, 0, HEIGHT);\r\n  }\r\n  \r\n  buttonA.read();\r\n  buttonB.read();\r\n  buttonC.read();\r\n  buttonUp.read();\r\n  buttonLeft.read();\r\n  buttonRight.read();\r\n  buttonDown.read();\r\n  buttonShoulder.read();\r\n}\r\n\r\nboolean isAboveKey(int keyNum){\r\n  return (mouseX > keybXY[keyNum][0]-23 && mouseX < keybXY[keyNum][0]+13 && mouseY > keybXY[keyNum][1]-20 && mouseY < keybXY[keyNum][1]+11);\r\n}\r\n"
  },
  {
    "path": "Memo/ulp.s",
    "content": "#include \"soc/rtc_cntl_reg.h\"\r\n#include \"soc/rtc_io_reg.h\"\r\n#include \"soc/soc_ulp.h\"\r\n\r\n  /* Define variables, which go into .bss section (zero-initialized data) */\r\n  .bss\r\n\r\n  .global toggle_counter\r\ntoggle_counter:\r\n  .long 0\r\n\r\n  /* Code goes into .text section */\r\n  .text\r\n  .global entry\r\nentry:\r\n\r\n  /* Read toggle counter */\r\n  move r3, toggle_counter\r\n  ld r0, r3, 0\r\n  /* Increment */\r\n  add r0, r0, 1\r\n  /* Save counter in memory */\r\n  st r0, r3, 0\r\n  /* Save counter in r3 to use it later */\r\n  move r3, r0\r\n\r\n  /* Disable hold of RTC_GPIO12 output */\r\n  WRITE_RTC_REG(RTC_IO_TOUCH_PAD2_REG,RTC_IO_TOUCH_PAD2_HOLD_S,1,0)\r\n\r\n  /* Toggle RTC_GPIO12 output */\r\n  and r0, r0, 0x01\r\n  jump toggle_clear, eq\r\n\r\n  /* Set the RTC_GPIO12 output HIGH */\r\n  WRITE_RTC_REG(RTC_GPIO_OUT_W1TS_REG,RTC_GPIO_OUT_DATA_W1TS_S+12,1,1)\r\n  jump toggle_complete\r\n\r\n  .global toggle_clear\r\ntoggle_clear:\r\n  /* Set the RTC_GPIO12 output LOW (clear output) */\r\n  WRITE_RTC_REG(RTC_GPIO_OUT_W1TC_REG,RTC_GPIO_OUT_DATA_W1TC_S+12,1,1)\r\n\r\n  .global toggle_complete\r\ntoggle_complete:\r\n\r\n  /* Enable hold on RTC_GPIO12 output */\r\n  WRITE_RTC_REG(RTC_IO_TOUCH_PAD2_REG,RTC_IO_TOUCH_PAD2_HOLD_S,1,1)\r\n\r\n  halt\r\n"
  },
  {
    "path": "Memo/ulp_main.h",
    "content": "#include \"Arduino.h\"\r\n\r\nextern uint32_t ulp_entry;\r\nextern uint32_t ulp_toggle_clear;\r\nextern uint32_t ulp_toggle_complete;\r\n"
  },
  {
    "path": "README.md",
    "content": "# ESP32-Handheld\n\n![My image](https://cdn.hackaday.io/images/7388051584724557389.JPG)\n\n\nTested with Arduino for ESP32 Core 1.0.4\n\nThe lastes firmware needs the modified Adafruit SharpMem library. This library includes a hugely faster screen clearing function and hardware SPI.\n\n\n![](paint.gif)\n\n![](keyboard.gif)\n\n![](ANCS.gif)\n"
  }
]