Repository: MaslowCommunityGarden/3-Bit-CNC-Starter-Pack Branch: master Commit: 9568b04ce62c Files: 23 Total size: 7.4 KB Directory structure: gitextract_dxrp2u26/ ├── BOM.md ├── INSTRUCTIONS.md ├── README.md ├── ROBOT.md ├── XY Axis Motors/ │ ├── BOM.md │ ├── INSTRUCTIONS.md │ ├── README.md │ ├── ROBOT.md │ └── usrinput.txt ├── __MACOSX/ │ ├── ._XY Axis Motors │ ├── ._mks_config.txt │ ├── ._mks_font │ ├── ._mks_pic │ ├── XY Axis Motors/ │ │ ├── ._.DS_Store │ │ ├── ._BOM.md │ │ ├── ._INSTRUCTIONS.md │ │ ├── ._README.md │ │ ├── ._ROBOT.md │ │ └── ._usrinput.txt │ └── mks_pic/ │ └── ._bmp_iconlogo.lg ├── mks_config.txt ├── mks_pic/ │ └── bmp_iconlogo.lg └── usrinput.txt ================================================ FILE CONTENTS ================================================ ================================================ FILE: BOM.md ================================================ In stock and ready to ship from [Maker Made CNC](https://www.makermadecnc.com/product/router-bit-starter-pack-3pc/) ================================================ FILE: INSTRUCTIONS.md ================================================ In stock and ready to ship from [Maker Made CNC](https://www.makermadecnc.com/product/router-bit-starter-pack-3pc/) ================================================ FILE: README.md ================================================ # 15’ XL Drive Chains A set of two, XL (15ft) drive chains for the Maslow or M2 CNC. For those looking to improve their cut accuracy at the edges of their frame (by pairing with a 12ft top beam), or create a work surface larger than the standard 4 x 8 ft Maslow frame. ### ***Use promo code MASLOW10 for 10% off your order!*** Head on over to [Maker Made](https://makermade.com/collections/all/products/maslow-m2-cnc-15ft-drive-chains-2-chain-slack-sprocket-accessory) to order! ================================================ FILE: ROBOT.md ================================================ { "ModerationLevel": "customManaged", "Facilitator": "skilescm", "Price":"$59.00", "Category": "market" } ================================================ FILE: XY Axis Motors/BOM.md ================================================ Purchase at [MakerMadeCNC](https://www.makermadecnc.com/product/xy-drive-motor-sold-individually/) ================================================ FILE: XY Axis Motors/INSTRUCTIONS.md ================================================ Upgraded X/Y Axis Motors with the new gears. Sold individually Includes: One X/Y Axis Motor Purchase at [MakerMadeCNC](https://www.makermadecnc.com/product/xy-drive-motor-sold-individually/) ================================================ FILE: XY Axis Motors/README.md ================================================ # Upgraded XY Axis Motors Upgraded motors for X/Y Axis with the new gears. 1-year warranty provided by MakerMadeCNC. ================================================ FILE: XY Axis Motors/ROBOT.md ================================================ { "ModerationLevel": "customManaged", "Facilitator": "digital-exports-ltd", "Price":"$50.00", "Category": "market" } ================================================ FILE: XY Axis Motors/usrinput.txt ================================================ MakerMade Maslow CNC Product 1~MakerMade Maslow CNC Product 1 - Upgraded XY Drive Motors~customManaged~digital-exports-ltd~Market ================================================ FILE: mks_config.txt ================================================ #-------------------------------------------------------------------- ######### Printer type setting ################################## #mainboard firmware setting(marlin:1; repetier:2; smoothie:3) >cfg_firmware_type:1 #machine setting (Normal:1; Delta:2) >cfg_machine_type:1 #baud rate (9600:1; 57600:2; 115200:3; 250000:4) >cfg_baud_rate:3 #multi-language(enable:1, disable:0) >cfg_multiple_language:0 #languages setting #(simplified Chinese:1; traditional Chinese:2; English:3; Russian:4; Spanish:5). This configuration is valid when "cfg_multiple_language" is disabled. >cfg_language_type:3 #extruder number(one:1; dual:2) >cfg_sprayer_counter:1 #enable heated bed(yes:1; no: 0) >cfg_custom_bed_flag:1 #the max target temp of extruder and heated bed >cfg_max_sprayer_temperature:270 >cfg_max_hotbed_temperature:150 #pause position (-1 is invalid; Z-axis is relative position) >cfg_XPOS:-1 >cfg_YPOS:-1 >cfg_ZADD:10 #----------------------------------------------------------------------- ######### Advanced Function Option ################################## #enable UPS?(yes:1; no:0) >cfg_have_ups_device:0 #enable power detecting module(mks 220det:1; mks pwc:0) >cfg_insert_det_module:0 #enable auto off after print finish function (no:0; Yes:1） >cfg_print_finish_close_Machine:0 #set PB0 signal when use it for sencond nozzle (high level:1; low level:0) >cfg_PB0_trigger_Level:0 #set PB1 signal (high level:1; low level:0) >cfg_PB1_trigger_Level:0 #set error range of Z-axis on breakpoints recovery >cfg_breakpoint_z_error:0.2 #--------------------------------------------------------------------------- ######### Filament Change Function ############################## #the speed to extrude filament(mm/min) >cfg_filament_load_speed:1200 #the lenght to extrude filament (mm) >cfg_filament_load_length:200 #the speed to retract filament(mm/min) >cfg_filament_unload_speed:1200 #the lenght to retract filament(mm) >cfg_filament_unload_length:200 #It is the minimum temperature for filament change. It will auto heat up if the current temp doesn't reach the target. >cfg_filament_load_limit_temperature:200 #--------------------------------------------------------------------------- ############ Leveling Function ######################################## #leveling mode(manual:0; auto:1; conceal leveling button:2) >cfg_leveling_mode:0 #the command of auto leveling (G29 is available for Marlin.While G32 is for Repetier and Smoothieware) >cfg_auto_leveling_cmd:G28;G29; #the point number of manual leveling:(3,4,5 point available) >cfg_point_number:4 #the coordinates of 5 point on manual leveling >cfg_point1:50,50 >cfg_point2:180,50 >cfg_point3:180,180 >cfg_point4:50,180 >cfg_point5:150,150 #the travel speed of leveling(mm/min) >cfg_leveling_z_speed:1500 >cfg_leveling_xy_speed:3000 #When the XY axis is moved manually, the height of the z-axis of the extruded Z axis from the origin (mm) #normally only needs to be reconfigured when the z axis is zero to the maximum under the smoothware firmware. > cfg_leveling_z_high: 10 #--------------------------------------------------------------------------- ############# WIFI Function ########################################## #wifi model(MKS WIFI TFT:0; MKS HLK-WIFI:1) >cfg_wifi_type:0 #wifi mode(0:sta;1:ap) >cfg_wifi_mode:0 #wifi name and password >cfg_wifi_ap_name:MKS_wifi >cfg_wifi_key_code:makerbase #0:disable cloud service 1:enable cloud service >cfg_cloud_enable:1 #cloud service adress >cfg_wifi_cloud_host:www.baizhongyun.cn #cloud service port >cfg_cloud_port:10086 #Dynamic access IP >cfg_ip_dhcp_flag:1 #IP/mask/gateway >cfg_ip_address:192.168.3.100 >cfg_ip_mask:255.255.255.0 >cfg_ip_gate:192.168.3.1 #-------------------------------------------------------------------------------- ############## Function Customization ####################################### #user-defined function1 and 2.(display this button . disable: 0; enable: 1) >cfg_function_btn1_display:1 #command of user-defined function >function_btn1_cmd:M84; #set number of "More" button >moreitem_pic_cnt:0 #edit command for 1~7 "More" button,each command must be separated by semicolon ";" >moreitem_button1_cmd:G28 X0; >moreitem_button2_cmd:G28 X0; >moreitem_button3_cmd:G28 Y0; >moreitem_button4_cmd:G28 Y0; >moreitem_button5_cmd:G28 Z0; >moreitem_button6_cmd:G28 Z0; >moreitem_button7_cmd:G28; #how many "More" button display on screen interface >morefunc_cnt:0 #command setting on button1~6 >morefunc1_cmd:G28; >morefunc2_cmd:G28; >morefunc3_cmd:G28; >morefunc4_cmd:G28; >morefunc5_cmd:G28; >morefunc6_cmd:G28; #--------------------------------------------------------------------------------- ##### Display Customization(button and logo customized see User's Manual) ####### #the color of screen background >cfg_background_color:0x000000 #the color of title text >cfg_title_color:0xFFFFFF #the color of temperature,fan,(etc) background >cfg_state_background_color:0x000000 #the color of temprature,fan,(etc) text >cfg_state_text_color:0xFFFFFF #the color of file button >cfg_filename_background_color:0x000000 #the color of file text >cfg_filename_color:0xFFFFFF #the color of background in printing >cfg_printingstat_word_background_color:0x000000 #the color of text in printing status >cfg_printingstat_word_color:0xFFFFFF #3D effects setting (disable: 0; enable: 1) >cfg_BUTTON_3D_effects:0 #The screen is flipped 180°(0: no flip, 1: flip) >cfg_OVERTURN_180:0 #shield the function of detection power (0:no shield ,1:shield) >cfg_disable_PWR_det:0 #shield the function of detection filament (0:no shield ,1:shield) >cfg_disable_MT_det:0 #Whether to support the function of dual extruder single nozzle.(0: disable, 1: enable) #the extruder number need set to dual. >cfg_single_nozzle:1 ================================================ FILE: usrinput.txt ================================================ 3 Bit CNC Starter Pack~3 Bit starter pack~customManaged~skilescm~Market