Repository: MathisP75/hyppuccin Branch: main Commit: 45c6ae813ac4 Files: 90 Total size: 411.3 KB Directory structure: gitextract_tylkocls/ ├── README.md ├── copy-configs.sh ├── dunst/ │ ├── dunstrc │ └── mocha.conf ├── eww/ │ ├── README.md │ ├── css/ │ │ ├── _colors.scss │ │ ├── _colorscheme.scss │ │ └── _overview.scss │ ├── eww.scss │ ├── eww.yuck │ ├── modules/ │ │ └── variables.yuck │ ├── scripts/ │ │ ├── activewin │ │ ├── activews │ │ ├── focuswindow │ │ ├── get-icon.py │ │ ├── overview1 │ │ ├── overview2 │ │ ├── selectwindow │ │ ├── winlist │ │ ├── winnumbers │ │ └── workspaces │ ├── tmp/ │ │ ├── _colorscheme.colorpallete │ │ ├── _iconcolor.txt │ │ └── colors_generated.conf │ └── windows/ │ └── overview.yuck ├── hypr/ │ ├── desktop-portals.sh │ ├── hyprland.conf │ ├── hyprpaper-desktop.conf │ ├── hyprpaper-laptop.conf │ ├── mocha.conf │ ├── per-monitor-launcher.sh │ ├── portals-log │ ├── scripts/ │ │ ├── focused-window │ │ ├── get-last-focused-window.sh │ │ └── last-focused-window │ └── toggle-gaps.sh ├── kitty/ │ └── kitty.conf ├── nvim/ │ ├── init.vim │ └── keymappings.lua ├── ranger/ │ ├── commands.py │ ├── commands_full.py │ ├── rc.conf │ ├── rifle.conf │ └── scope.sh ├── rofi/ │ ├── colors.rasi │ ├── config.rasi │ └── style.rasi ├── wallpapers/ │ └── catppuccin-custom.xcf ├── waybar/ │ ├── colors/ │ │ └── mocha.css │ ├── desktop-bar/ │ │ ├── config │ │ └── style.css │ ├── laptop-bar/ │ │ ├── config │ │ └── style.css │ └── scripts/ │ ├── dunst.sh │ ├── mediaplayer.py │ ├── power-menu/ │ │ ├── powermenu.sh │ │ ├── shared/ │ │ │ ├── colors/ │ │ │ │ ├── adapta.rasi │ │ │ │ ├── arc.rasi │ │ │ │ ├── black.rasi │ │ │ │ ├── catppuccin.rasi │ │ │ │ ├── cyberpunk.rasi │ │ │ │ ├── dracula.rasi │ │ │ │ ├── everforest.rasi │ │ │ │ ├── gruvbox.rasi │ │ │ │ ├── lovelace.rasi │ │ │ │ ├── navy.rasi │ │ │ │ ├── nord.rasi │ │ │ │ ├── onedark.rasi │ │ │ │ ├── paper.rasi │ │ │ │ ├── solarized.rasi │ │ │ │ ├── tokyonight.rasi │ │ │ │ └── yousai.rasi │ │ │ ├── colors.rasi │ │ │ └── fonts.rasi │ │ ├── style-1.rasi │ │ ├── style-2.rasi │ │ ├── style-3.rasi │ │ ├── style-4.rasi │ │ └── style-5.rasi │ ├── rofi-wifi-menu.sh │ ├── spotify.sh │ └── weather.py ├── wofi/ │ ├── colors/ │ │ └── mocha.css │ ├── config │ ├── powermenu.sh │ ├── style.css │ └── wifimenu.sh ├── wrappedhl └── zsh/ ├── .p10k.zsh └── .zshrc ================================================ FILE CONTENTS ================================================ ================================================ FILE: README.md ================================================ # hyppuccin Catppuccin theme for Hyprland * Compositor: Hyprland * Terminal: Kitty * Shell: zsh * Color scheme (and all themes): Cattpuccin * GUI file manager: Thunar * TUI file manager: Ranger * Bar: Waybar * App launcher: Wofi * Text editor: nvim * Note taker: Joplin * Cursor theme: Bibata modern classic * PDF viewer: Zathura ![alt text](./screenshots/screenshot1.png) ![alt text](./screenshots/screenshot2.png) ![alt text](./screenshots/screenshot3.png) ![alt text](./screenshots/screenshot4.png) ![alt text](./screenshots/screenshot5.png) ================================================ FILE: copy-configs.sh ================================================ #!/bin/sh cp -r -l $HOME/.config/hypr/ ./ cp -r -l $HOME/.config/waybar/ ./ cp -r -l $HOME/.config/wofi/ ./ cp -r -l $HOME/.config/nvim/ ./ cp -r -l $HOME/.config/dunst/ ./ cp -r -l $HOME/.config/kitty/ ./ cp -r -l $HOME/.config/rofi/ ./ cp -r -l $HOME/.config/eww/ ./ cp -r -l $HOME/.zshrc ./zsh cp -r -l $HOME/.p10k.zsh ./zsh ================================================ FILE: dunst/dunstrc ================================================ # See dunst(5) for all configuration options [global] ### Display ### # Which monitor should the notifications be displayed on. monitor = 0 # Display notification on focused monitor. Possible modes are: # mouse: follow mouse pointer # keyboard: follow window with keyboard focus # none: don't follow anything # # "keyboard" needs a window manager that exports the # _NET_ACTIVE_WINDOW property. # This should be the case for almost all modern window managers. # # If this option is set to mouse or keyboard, the monitor option # will be ignored. follow = none ### Geometry ### # dynamic width from 0 to 300 # width = (0, 300) # constant width of 300 width = 500 # The maximum height of a single notification, excluding the frame. height = 300 # Position the notification in the top right corner origin = top-right # Offset from the origin offset = 25x25 # Scale factor. It is auto-detected if value is 0. scale = 0 # Maximum number of notification (0 means no limit) notification_limit = 0 ### Progress bar ### # Turn on the progess bar. It appears when a progress hint is passed with # for example dunstify -h int:value:12 progress_bar = true # Set the progress bar height. This includes the frame, so make sure # it's at least twice as big as the frame width. progress_bar_height = 10 # Set the frame width of the progress bar progress_bar_frame_width = 1 # Set the minimum width for the progress bar progress_bar_min_width = 150 # Set the maximum width for the progress bar progress_bar_max_width = 300 # Show how many messages are currently hidden (because of # notification_limit). indicate_hidden = yes # The transparency of the window. Range: [0; 100]. # This option will only work if a compositing window manager is # present (e.g. xcompmgr, compiz, etc.). (X11 only) transparency = 100 # Draw a line of "separator_height" pixel height between two # notifications. # Set to 0 to disable. # If gap_size is greater than 0, this setting will be ignored. separator_height = 2 # Padding between text and separator. padding = 8 # Horizontal padding. horizontal_padding = 8 # Padding between text and icon. text_icon_padding = 0 # Defines width in pixels of frame around the notification window. # Set to 0 to disable. frame_width = 3 # Defines color of the frame around the notification window. frame_color = "#FFFFFF" # Size of gap to display between notifications - requires a compositor. # If value is greater than 0, separator_height will be ignored and a border # of size frame_width will be drawn around each notification instead. # Click events on gaps do not currently propagate to applications below. gap_size = 15 # Define a color for the separator. # possible values are: # * auto: dunst tries to find a color fitting to the background; # * foreground: use the same color as the foreground; # * frame: use the same color as the frame; # * anything else will be interpreted as a X color. separator_color = frame # Sort messages by urgency. sort = yes # Don't remove messages, if the user is idle (no mouse or keyboard input) # for longer than idle_threshold seconds. # Set to 0 to disable. # A client can set the 'transient' hint to bypass this. See the rules # section for how to disable this if necessary # idle_threshold = 120 ### Text ### font = SFPro 12 # The spacing between lines. If the height is smaller than the # font height, it will get raised to the font height. line_height = 0 # Possible values are: # full: Allow a small subset of html markup in notifications: # bold # italic # strikethrough # underline # # For a complete reference see # . # # strip: This setting is provided for compatibility with some broken # clients that send markup even though it's not enabled on the # server. Dunst will try to strip the markup but the parsing is # simplistic so using this option outside of matching rules for # specific applications *IS GREATLY DISCOURAGED*. # # no: Disable markup parsing, incoming notifications will be treated as # plain text. Dunst will not advertise that it has the body-markup # capability if this is set as a global setting. # # It's important to note that markup inside the format option will be parsed # regardless of what this is set to. markup = full # The format of the message. Possible variables are: # %a appname # %s summary # %b body # %i iconname (including its path) # %I iconname (without its path) # %p progress value if set ([ 0%] to [100%]) or nothing # %n progress value if set without any extra characters # %% Literal % # Markup is allowed format = "%s\n%b" # Alignment of message text. # Possible values are "left", "center" and "right". alignment = left # Vertical alignment of message text and icon. # Possible values are "top", "center" and "bottom". vertical_alignment = center # Show age of message if message is older than show_age_threshold # seconds. # Set to -1 to disable. show_age_threshold = 60 # Specify where to make an ellipsis in long lines. # Possible values are "start", "middle" and "end". ellipsize = middle # Ignore newlines '\n' in notifications. ignore_newline = no # Stack together notifications with the same content stack_duplicates = true # Hide the count of stacked notifications with the same content hide_duplicate_count = false # Display indicators for URLs (U) and actions (A). show_indicators = yes ### Icons ### # Recursive icon lookup. You can set a single theme, instead of having to # define all lookup paths. enable_recursive_icon_lookup = true # Set icon theme (only used for recursive icon lookup) icon_theme = Adwaita # You can also set multiple icon themes, with the leftmost one being used first. # icon_theme = "Adwaita, breeze" # Align icons left/right/top/off icon_position = off # Scale small icons up to this size, set to 0 to disable. Helpful # for e.g. small files or high-dpi screens. In case of conflict, # max_icon_size takes precedence over this. min_icon_size = 32 # Scale larger icons down to this size, set to 0 to disable max_icon_size = 128 # Paths to default icons (only neccesary when not using recursive icon lookup) icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/ ### History ### # Should a notification popped up from history be sticky or timeout # as if it would normally do. sticky_history = yes # Maximum amount of notifications kept in history history_length = 20 ### Misc/Advanced ### # dmenu path. dmenu = /usr/bin/dmenu -p dunst: # Browser for opening urls in context menu. browser = /usr/bin/xdg-open # Always run rule-defined scripts, even if the notification is suppressed always_run_script = true # Define the title of the windows spawned by dunst title = Dunst # Define the class of the windows spawned by dunst class = Dunst # Define the corner radius of the notification window # in pixel size. If the radius is 0, you have no rounded # corners. # The radius will be automatically lowered if it exceeds half of the # notification height to avoid clipping text and/or icons. corner_radius = 15 # Ignore the dbus closeNotification message. # Useful to enforce the timeout set by dunst configuration. Without this # parameter, an application may close the notification sent before the # user defined timeout. ignore_dbusclose = false ### Wayland ### # These settings are Wayland-specific. They have no effect when using X11 # Uncomment this if you want to let notications appear under fullscreen # applications (default: overlay) # layer = top # Set this to true to use X11 output on Wayland. force_xwayland = false ### Legacy # Use the Xinerama extension instead of RandR for multi-monitor support. # This setting is provided for compatibility with older nVidia drivers that # do not support RandR and using it on systems that support RandR is highly # discouraged. # # By enabling this setting dunst will not be able to detect when a monitor # is connected or disconnected which might break follow mode if the screen # layout changes. force_xinerama = false ### mouse # Defines list of actions for each mouse event # Possible values are: # * none: Don't do anything. # * do_action: Invoke the action determined by the action_name rule. If there is no # such action, open the context menu. # * open_url: If the notification has exactly one url, open it. If there are multiple # ones, open the context menu. # * close_current: Close current notification. # * close_all: Close all notifications. # * context: Open context menu for the notification. # * context_all: Open context menu for all notifications. # These values can be strung together for each mouse event, and # will be executed in sequence. mouse_left_click = close_current mouse_middle_click = do_action, close_current mouse_right_click = close_all # Experimental features that may or may not work correctly. Do not expect them # to have a consistent behaviour across releases. [experimental] # Calculate the dpi to use on a per-monitor basis. # If this setting is enabled the Xft.dpi value will be ignored and instead # dunst will attempt to calculate an appropriate dpi value for each monitor # using the resolution and physical size. This might be useful in setups # where there are multiple screens with very different dpi values. per_monitor_dpi = true [global] frame_color = "#89B4FA" separator_color= frame [urgency_low] background = "#1E1E2E" foreground = "#CDD6F4" [urgency_normal] background = "#1E1E2E" foreground = "#CDD6F4" [urgency_critical] background = "#1E1E2E" foreground = "#CDD6F4" frame_color = "#FAB387" # Every section that isn't one of the above is interpreted as a rules to # override settings for certain messages. # # Messages can be matched by # appname (discouraged, see desktop_entry) # body # category # desktop_entry # icon # match_transient # msg_urgency # stack_tag # summary # # and you can override the # background # foreground # format # frame_color # fullscreen # new_icon # set_stack_tag # set_transient # set_category # timeout # urgency # icon_position # skip_display # history_ignore # action_name # word_wrap # ellipsize # alignment # hide_text # # Shell-like globbing will get expanded. # # Instead of the appname filter, it's recommended to use the desktop_entry filter. # GLib based applications export their desktop-entry name. In comparison to the appname, # the desktop-entry won't get localized. # # SCRIPTING # You can specify a script that gets run when the rule matches by # setting the "script" option. # The script will be called as follows: # script appname summary body icon urgency # where urgency can be "LOW", "NORMAL" or "CRITICAL". # # NOTE: It might be helpful to run dunst -print in a terminal in order # to find fitting options for rules. # Disable the transient hint so that idle_threshold cannot be bypassed from the # client #[transient_disable] # match_transient = yes # set_transient = no # # Make the handling of transient notifications more strict by making them not # be placed in history. #[transient_history_ignore] # match_transient = yes # history_ignore = yes # fullscreen values # show: show the notifications, regardless if there is a fullscreen window opened # delay: displays the new notification, if there is no fullscreen window active # If the notification is already drawn, it won't get undrawn. # pushback: same as delay, but when switching into fullscreen, the notification will get # withdrawn from screen again and will get delayed like a new notification #[fullscreen_delay_everything] # fullscreen = delay #[fullscreen_show_critical] # msg_urgency = critical # fullscreen = show #[espeak] # summary = "*" # script = dunst_espeak.sh #[script-test] # summary = "*script*" # script = dunst_test.sh #[ignore] # # This notification will not be displayed # summary = "foobar" # skip_display = true #[history-ignore] # # This notification will not be saved in history # summary = "foobar" # history_ignore = yes #[skip-display] # # This notification will not be displayed, but will be included in the history # summary = "foobar" # skip_display = yes #[signed_on] # appname = Pidgin # summary = "*signed on*" # urgency = low # #[signed_off] # appname = Pidgin # summary = *signed off* # urgency = low # #[says] # appname = Pidgin # summary = *says* # urgency = critical # #[twitter] # appname = Pidgin # summary = *twitter.com* # urgency = normal # #[stack-volumes] # appname = "some_volume_notifiers" # set_stack_tag = "volume" # # vim: ft=cfg ================================================ FILE: dunst/mocha.conf ================================================ [global] frame_color = "#89B4FA" separator_color= frame [urgency_low] background = "#1E1E2E" foreground = "#CDD6F4" [urgency_normal] background = "#1E1E2E" foreground = "#CDD6F4" [urgency_critical] background = "#1E1E2E" foreground = "#CDD6F4" frame_color = "#FAB387" ================================================ FILE: eww/README.md ================================================ # Eww configuration This configuration aims to provide a fully working shell replacement for compositors/window managers. Features constantly get added and existing ones get improved. ## ❔ Usage To quickly install this config, grab all the files in this directory and put them in `~/.config/eww`. Then run `eww daemon` and `eww open bar`. Enjoy! Dependencies: - Icon fonts: `material-design-icons`, `material-icons` - Text font: Torus (get it from the osu! website with DevTools) ## 🎨 Theme - tokyonight ================================================ FILE: eww/css/_colors.scss ================================================ $blue: #89b4fa; $lavender: #b4befe; $sapphire: #74c7ec; $sky: #89dceb; $teal: #94e2d5; $green: #a6e3a1; $yellow: #f9e2af; $peach: #fab387; $maroon: #eba0ac; $red: #f38ba8; $mauve: #cba6f7; $pink: #f5c2e7; $flamingo: #f2cdcd; $rosewater: #f5e0dc; $true: #EF738A; $false: #A9B1D6; $forestgreen: #A8B468; $forestyellow : #8e8370; $foresttext : #d3c6ab; $forestblack : #1e201f; $forestred : #e76c69; $forestpink : #d698b5; $forestorange : #e59576; $forestgray : #75817b; $forestgraylight: #495156; $forestgreendark: #7fba90; $forestblue: #77AEA7; $tokyobluedark: #1A1B26; $tokyobluelessdark: #1f212e; $tokyotext: #a9b1d6; $tokyopink: #ff79b1; //nah theres no pink in tokyonight, but i need one so added $tokyored: #EF738A; $tokyoorange: #FF9E64; $tokyoyellow: #E0AF68; $tokyogreen: #9ECE6A; $tokyoturquoise: #73daca; $tokyoice: #b4f9f8; $tokyocyan: #0DB9D7; $tokyoblue: #7AA2F7; $tokyopurple: #9778D0; $tokyogrey: #444B6A; $catbg: #1E1E2E; $text: #cdd6f4; $subtext0: #a6adc8; $subtext1: #bac2de; $overlay0: #6c7086; $overlay1: #7f849c; $overlay2: #9399b2; $surface0: #313244; $surface1: #45475a; $surface2: #585b70; $base: #1e1e2e; $mantle: #181825; $crust: #11111b; $fg: $tokyotext; $bg: #171726; $barbg: #131426; $shadow: $crust; // $battcolor: $tokyogreen; // $memcolor: $tokyoorange; // $cpucolor: $tokyoblue; ================================================ FILE: eww/css/_colorscheme.scss ================================================ //Auto generated color theme for image at: https://i.ytimg.com/vi/xKbIQaKEE8s/hqdefault.jpg?sqp=-oaymwEcCNACELwBSFXyq4qpAw4IARUAAIhCGAFwAcABBg==&rs=AOn4CLC_6DS9-dITi7axcFf2eedEZ_68EQ @function bluetint($color, $percentage) { @return mix(#CDDFED, $color, $percentage); } @function blueshade($color, $percentage) { @return mix(#152E50, $color, $percentage); } $colorbg: #0f1a1b; $colortext: #c8e7e8; $color0: #96A46E; $color1: #3B6E8F; $color2: #629C9D; $color3: #5EB3CB; $color4: #9BAC9A; $color5: #B9CCAB; $color6: #c8e7e8; $color7: #5EB3CB; ================================================ FILE: eww/css/_overview.scss ================================================ .overview-window { @include window; font-family: 'SFPro', 'Material Symbols Rounded'; border-radius: 20px; background-color: $crust; // background-color: transparent; // border: 3px solid $color0; padding: 5px; } .overview-window-top { @include rounding; background-color: transparent; border: 3px solid transparent; padding: 5px; } .overview-ws { border-radius: 11px; background-color: $mantle; margin: 5px; } .overview-ws-window { border: 2px solid $peach; border-radius: 11px; margin: 3px; padding-left: 5px; padding-right: 5px; } .overview-icon { margin-top: 5px; margin-bottom: 5px; padding-left: 17px; padding-right: 17px; background-size: contain; background-repeat: no-repeat; background-position: center; } .overview-ws-text { padding-left: 5px; font-size: 13pt; } .overview-ws-subtext { padding-left: 5px; font-size: 9pt; } .overview-ws-number { //Note: height 100px width 356px font-size: 25pt; border-radius: 11px; background-color: $overlay0; color: $colortext; margin: 10px; min-height: 40px; min-width: 40px; } .overview-title { font-weight: bold; font-size: 15pt; padding-top: .6rem; padding-bottom: .6rem; } ================================================ FILE: eww/eww.scss ================================================ @import 'css/colors'; @import 'css/colorscheme'; $colorbar: #c8e7e8; $battcolor: $colorbar; $memcolor: $color1; $cpucolor: $color3; $border: $color7; $surface0: tint($colorbg, 10%); $bg1: $surface0; @mixin rounding { border-radius: 8px; } @mixin filter { saturate { filter: saturate(3); } grayscale { filter: grayscale(100%); } contrast { filter: contrast(160%); } brightness { filter: brightness(0.25); } blur { filter: blur(3px); } invert { filter: invert(100%); } .sepia { filter: sepia(100%); } huerotate { filter: hue-rotate(180deg); } rss.opacity { filter: opacity(50%); } } @mixin window { border: 3px solid $sky; // box-shadow: 0 2px 3px $shadow; margin: 5px 5px 10px; @include rounding; } * { all: unset; transition: 200ms cubic-bezier(0.05, 0.9, 0.1, 1); background-repeat: no-repeat; } @import 'css/overview'; ================================================ FILE: eww/eww.yuck ================================================ (include "./modules/variables.yuck") (include "./windows/overview.yuck") ================================================ FILE: eww/modules/variables.yuck ================================================ (defvar selected '') (deflisten wsjsona `scripts/overview1`) (deflisten wsjsonb `scripts/overview2`) ================================================ FILE: eww/scripts/activewin ================================================ #!/usr/bin/bash getactivewin(){ winname=$(hyprctl activewindow | grep -e 'title: ' | sed 's/title: //' | sed 's/\t//') echo "$winname" } getactivewin if [ "$1" == "--once" ]; then exit 0 else socat -u UNIX-CONNECT:/tmp/hypr/"$HYPRLAND_INSTANCE_SIGNATURE"/.socket2.sock - | rg --line-buffered "window>>" | while read -r line; do getactivewin done fi ================================================ FILE: eww/scripts/activews ================================================ #!/usr/bin/bash focusedws=$(hyprctl activewindow -j | gojq '.workspace.id') if [ "$1" == "--once" ]; then exit 0 else socat -u UNIX-CONNECT:/tmp/hypr/"$HYPRLAND_INSTANCE_SIGNATURE"/.socket2.sock - | rg --line-buffered "workspace>>" | while read -r line; do case ${line%>>*} in "workspace") focusedws=${line#*>>} echo $focusedws ;; esac done fi ================================================ FILE: eww/scripts/focuswindow ================================================ #!/usr/bin/bash if [[ $1 == '_none' ]]; then hyprctl dispatch workspace $2 else hyprctl dispatch focuswindow address:$1 fi ================================================ FILE: eww/scripts/get-icon.py ================================================ #!/usr/bin/env python3 import gi import sys gi.require_version('Gtk', '3.0') from gi.repository import Gtk # Predefine class corrections if sys.argv[1] == 'Code': sys.argv[1] = 'code' elif sys.argv[1] == 'code-url-handler': sys.argv[1] = 'code' elif sys.argv[1] == 'Microsoft-edge': sys.argv[1] = 'microsoft-edge' elif sys.argv[1] == 'GitHub Desktop': sys.argv[1] = 'github-desktop' elif sys.argv[1] == 'org.kde.kolourpaint': sys.argv[1] = 'kolourpaint' elif sys.argv[1] == 'osu!': sys.argv[1] = 'osu' elif sys.argv[1] == 'Electron': sys.argv[1] = 'discord' elif sys.argv[1] == 'WebCord': sys.argv[1] = 'discord' icon_name = sys.argv[1] icon_theme = Gtk.IconTheme.get_default() icon = icon_theme.lookup_icon(icon_name, 48, 0) if icon: print(icon.get_filename()) else: print("not found") ================================================ FILE: eww/scripts/overview1 ================================================ #!/usr/bin/bash dummy='{"address":"_none","at":[0,0],"class":"workspace","size":[0,0],"title":"<___overview_workspace>","workspace":{"id":<___overview_workspace>, "name": "<___overview_workspace>"}}' getwins() { hyprctlclients=$(hyprctl clients -j \ | grep -v '"xwayland": ' \ | grep -v '"grouped": ' \ | grep -v '"pid": ' \ | grep -v '"fullscreenMode": ' \ | grep -v '"monitor": ' \ | grep -v '"floating": ' \ | grep -v '"fullscreen": ' \ | grep -v '"pinned":') # | grep -v ""name":") # echo '-=-=-=- final output -=-=-=-' # echo "$toprint" # echo $(echo "$hyprctlclients") # Print on one line only workspace=('[' '[' '[' '[' '[' '[' '[' '[' '[' '[') workspacecnt=(0 0 0 0 0 0 0 0 0 0) wsid=0 # echo $hyprctlclients | gojq -c '.[]' IFS=$'\n' clientsarr=( $(echo $hyprctlclients | gojq -c '.[]') ) for client in "${clientsarr[@]}"; do wsid=$(echo $client | gojq -c '.workspace.id') ((wsid-=1)) if [[ "${workspacecnt[wsid]}" != "0" ]]; then workspace[wsid]+="," fi clientclass=$(echo $client | gojq '.class' | sed 's/"//g') iconpath='' if [ -f "scripts/cache/$clientclass" ]; then iconpath=$(cat scripts/cache/$clientclass) if [ ! -f "${iconpath}" ]; then # Cache refresh if icon doesnt exist iconpath=$(scripts/get-icon.py "$clientclass") echo "${iconpath}" > "scripts/cache/$clientclass" fi else iconpath=$(scripts/get-icon.py "$clientclass") echo "${iconpath}" > "scripts/cache/$clientclass" fi if [[ ${iconpath} = "not found" ]]; then iconpath=$(scripts/get-icon.py "$(echo "${classarr[i]##*.}" | tr '[:upper:]' '[:lower:]')") if [[ ! ${iconpath} = "not found" ]]; then rm "scripts/cache/$clientclass" echo "${iconpath}" > "scripts/cache/$clientclass" else iconpath="/home/$USER/.local/share/icons/candy-icons/mimetypes/scalable/application-x-theme.svg" rm "scripts/cache/$clientclass" echo "${iconpath}" > "scripts/cache/$clientclass" fi fi client=${client::-1} client+=",\"icon\": \"$iconpath\"}" workspace[wsid]+="$client" # Add window to workspace JSON # echo -n "Window: $clientclass" # echo '; icon path: '"$iconpath" # echo "Count: ${workspacecnt[wsid]}" # echo 'ADDED TO: workspace '"$wsid" # echo ' --> '"${workspace[wsid]}" ((workspacecnt[wsid]+=1)) done for i in 0 1 2 3 4; do if [[ ${workspace[i]} == "[" ]]; then workspace[i]+=$(echo $dummy | sed "s/<___overview_workspace>/$((i+1))/g") fi done for i in 0 1 2 3 4; do workspace[i]+=']' done # echo '-=-=-=-=-=- Summary -=-=-=-=-=-' # -=-=-=-=-=-=-=-=-=-=-=-=-=-=- PRINT STUFF HERE -=-=-=-=-=-=-=-=-=-=-=-=-=-=- echo -n '[' for i in 0 1 2 3 4; do if [[ $i != 0 ]]; then echo -n ',' fi echo -n "${workspace[i]}" done echo ']' } # Do stuff here getwins if [ "$1" == "--once" ]; then exit 0 else socat -u UNIX-CONNECT:/tmp/hypr/"$HYPRLAND_INSTANCE_SIGNATURE"/.socket2.sock - | rg --line-buffered "window>>" | while read -r line; do getwins done fi ================================================ FILE: eww/scripts/overview2 ================================================ #!/usr/bin/bash dummy='{"address":"_none","at":[0,0],"class":"workspace","size":[0,0],"title":"<___overview_workspace>","workspace":{"id":<___overview_workspace>, "name": "<___overview_workspace>"}}' getwins() { hyprctlclients=$(hyprctl clients -j \ | grep -v '"xwayland": ' \ | grep -v '"grouped": ' \ | grep -v '"pid": ' \ | grep -v '"fullscreenMode": ' \ | grep -v '"monitor": ' \ | grep -v '"floating": ' \ | grep -v '"fullscreen": ' \ | grep -v '"pinned":') # | grep -v ""name":") # echo '-=-=-=- final output -=-=-=-' # echo "$toprint" # echo $(echo "$hyprctlclients") # Print on one line only workspace=('[' '[' '[' '[' '[' '[' '[' '[' '[' '[') workspacecnt=(0 0 0 0 0 0 0 0 0 0) wsid=0 # echo $hyprctlclients | gojq -c '.[]' IFS=$'\n' clientsarr=( $(echo $hyprctlclients | gojq -c '.[]') ) for client in "${clientsarr[@]}"; do wsid=$(echo $client | gojq -c '.workspace.id') ((wsid-=1)) if [[ "${workspacecnt[wsid]}" != "0" ]]; then workspace[wsid]+="," fi clientclass=$(echo $client | gojq '.class' | sed 's/"//g') iconpath='' if [ -f "scripts/cache/$clientclass" ]; then iconpath=$(cat scripts/cache/$clientclass) if [ ! -f "${iconpath}" ]; then # Cache refresh if icon doesnt exist iconpath=$(scripts/get-icon.py "$clientclass") echo "${iconpath}" > "scripts/cache/$clientclass" fi else iconpath=$(scripts/get-icon.py "$clientclass") echo "${iconpath}" > "scripts/cache/$clientclass" fi if [[ ${iconpath} = "not found" ]]; then iconpath=$(scripts/get-icon.py "$(echo "${classarr[i]##*.}" | tr '[:upper:]' '[:lower:]')") if [[ ! ${iconpath} = "not found" ]]; then rm "scripts/cache/$clientclass" echo "${iconpath}" > "scripts/cache/$clientclass" else iconpath="/home/$USER/.local/share/icons/candy-icons/mimetypes/scalable/application-x-theme.svg" rm "scripts/cache/$clientclass" echo "${iconpath}" > "scripts/cache/$clientclass" fi fi client=${client::-1} client+=",\"icon\": \"$iconpath\"}" workspace[wsid]+="$client" # Add window to workspace JSON # echo -n "Window: $clientclass" # echo '; icon path: '"$iconpath" # echo "Count: ${workspacecnt[wsid]}" # echo 'ADDED TO: workspace '"$wsid" # echo ' --> '"${workspace[wsid]}" ((workspacecnt[wsid]+=1)) done for i in 5 6 7 8 9; do if [[ ${workspace[i]} == "[" ]]; then workspace[i]+=$(echo $dummy | sed "s/<___overview_workspace>/$((i+1))/g") fi done for i in 5 6 7 8 9; do workspace[i]+=']' done # echo '-=-=-=-=-=- Summary -=-=-=-=-=-' # -=-=-=-=-=-=-=-=-=-=-=-=-=-=- PRINT STUFF HERE -=-=-=-=-=-=-=-=-=-=-=-=-=-=- echo -n '[' for i in 5 6 7 8 9; do if [[ $i != 5 ]]; then echo -n ',' fi echo -n "${workspace[i]}" done echo ']' } # Do stuff here getwins if [ "$1" == "--once" ]; then exit 0 else socat -u UNIX-CONNECT:/tmp/hypr/"$HYPRLAND_INSTANCE_SIGNATURE"/.socket2.sock - | rg --line-buffered "window>>" | while read -r line; do getwins done fi ================================================ FILE: eww/scripts/selectwindow ================================================ #!/usr/bin/bash selected=$(eval $2 get selected) if [[ $selected == "_none" ]] || [[ $selected == "" ]]; then eval "$2 update selected=$1" selected=$(eval $2 get selected) else hyprctl dispatch movetoworkspacesilent $3,address:$selected eval "$2 update selected=_none" selected=$(eval $2 get selected) fi ================================================ FILE: eww/scripts/winlist ================================================ #!/usr/bin/bash getwinlist(){ toprint=$(hyprctl clients -j \ | grep -v '"xwayland": ' \ | grep -v '"grouped": ' \ | grep -v '"pid": ' \ | grep -v '"fullscreenMode": ' \ | grep -v '"monitor": ' \ | grep -v '"floating": ' \ | grep -v '"fullscreen": ' \ | grep -v '"at": ' \ | grep -v '"size": ' \ | grep -v '"pinned":') # | grep -v ""name":") # echo '-=-=-=- final output -=-=-=-' # echo "$toprint" echo $(echo "$toprint") # Print on one line only } getwinlist if [ "$1" == "--once" ]; then exit 0 else socat -u UNIX-CONNECT:/tmp/hypr/"$HYPRLAND_INSTANCE_SIGNATURE"/.socket2.sock - | rg --line-buffered "window>>" | while read -r line; do echo $line # getwinlist done fi ================================================ FILE: eww/scripts/winnumbers ================================================ #!/usr/bin/bash geticonlist() { classes=$(hyprctl clients | grep -e 'class: ' | sed 's/class: Code/class: code/' | sed 's/\tclass: //') addresses=$(hyprctl clients | grep -e ' -> ') # echo "$classes" IFS=$'\n' classarr=($(echo "$classes")) printf '[' for i in "${!classarr[@]}"; do if [ $i -ne 0 ]; then printf ', ' fi printf "$i" done echo ']' } geticonlist if [ "$1" == "--once" ]; then exit 0 else socat -u UNIX-CONNECT:/tmp/hypr/"$HYPRLAND_INSTANCE_SIGNATURE"/.socket2.sock - | rg --line-buffered "window>>" | while read -r line; do geticonlist done fi ================================================ FILE: eww/scripts/workspaces ================================================ #!/usr/bin/env bash # define colors colors=("#FFFFFF" "#fab387" "#a6e3a1" "#89b4fa") # Active Workspaces dimmed=("#838383" "#f9e2af" "#94e2d5" "#b4befe") # Inactive workspaces empty="#313244" # Empty workspaces # get initial focused workspace focusedws=$(hyprctl -j monitors | gojq -r '.[] | select(.focused == true) | .activeWorkspace.id') declare -A o=([1]=0 [2]=0 [3]=0 [4]=0 [5]=0 [6]=0 [7]=0 [8]=0 [9]=0 [10]=0) declare -A monitormap declare -A workspaces # set color for each workspace status() { if [ "${o[$1]}" -eq 1 ]; then mon=${monitormap[${workspaces[$1]}]} if [ $focusedws -eq "$1" ]; then echo -n "${colors[$mon]}" else echo -n "${dimmed[$mon]}" fi else echo -n "$empty" fi } status_activity() { if [ "${o[$1]}" -eq 1 ]; then mon=${monitormap[${workspaces[$1]}]} if [ $focusedws -eq "$1" ]; then echo -n "active" else echo -n "inactive" fi else echo -n "empty" fi } # handle workspace create/destroy workspace_event() { o[$1]=$2 while read -r k v; do workspaces[$k]="$v"; done < <(hyprctl -j workspaces | gojq -r '.[]|"\(.id) \(.monitor)"') } # handle monitor (dis)connects monitor_event() { while read -r k v; do monitormap["$k"]=$v; done < <(hyprctl -j monitors | gojq -r '.[]|"\(.name) \(.id) "') } # generate the json for eww generate() { echo -n '[' for i in {1..10}; do echo -n ''$([ $i -eq 1 ] || echo ,)'{"num":"'$i'","class":"'$(status_activity "$i")'"}' # echo -n ''$([ $i -eq 1 ] || echo ,) '{ "number": "'"$i"'", "activity": "'"$(status_activity $i)"'", "color": "'$(status "$i")'" }' done # echo -n ',{"num":"'$focusedws'","clr":"'$(status "$focusedws")'"}' echo ']' } # setup # add monitors monitor_event # add workspaces while read -r k v; do workspaces[$k]="$v"; done < <(hyprctl -j workspaces | gojq -r '.[]|"\(.id) \(.monitor)"') # check occupied workspaces for num in "${!workspaces[@]}"; do o[$num]=1 done # generate initial widget generate # main loop socat -u UNIX-CONNECT:/tmp/hypr/"$HYPRLAND_INSTANCE_SIGNATURE"/.socket2.sock - | while read -r line; do case ${line%>>*} in "workspace") focusedws=${line#*>>} generate ;; "focusedmon") focusedws=${line#*,} generate ;; "createworkspace") workspace_event "${line#*>>}" 1 generate ;; "destroyworkspace") workspace_event "${line#*>>}" 0 generate ;; "monitor"*) monitor_event generate ;; esac # echo $line # generate done ================================================ FILE: eww/tmp/_colorscheme.colorpallete ================================================ //Auto generated color theme for image at: https://i.ytimg.com/vi/1y2wUv8R-0M/hqdefault.jpg?sqp=-oaymwE2CNACELwBSFXyq4qpAygIARUAAIhCGAFwAcABBvABAfgB1AaAAuADigIMCAAQARgwIEcofzAP&rs=AOn4CLC7Y8ZWbbAadA7DCL3H9YDr3eO7HQ @function bluetint($color, $percentage) { @return mix(#CDDFED, $color, $percentage); } @function blueshade($color, $percentage) { @return mix(#152E50, $color, $percentage); } $colorbg: #0a080d; $colortext: #e1e8ea; $color0: #2E6598; $color1: #57729D; $color2: #6696C2; $color3: #9F9FAA; $color4: #A0B0C9; $color5: #B1D8E6; $color6: #e1e8ea; $color7: #9F9FAA; ================================================ FILE: eww/tmp/_iconcolor.txt ================================================ #e1e8ea ================================================ FILE: eww/tmp/colors_generated.conf ================================================ # Auto generated color theme for image at: https://i.ytimg.com/vi/1y2wUv8R-0M/hqdefault.jpg?sqp=-oaymwE2CNACELwBSFXyq4qpAygIARUAAIhCGAFwAcABBvABAfgB1AaAAuADigIMCAAQARgwIEcofzAP&rs=AOn4CLC7Y8ZWbbAadA7DCL3H9YDr3eO7HQ general { col.active_border = rgba(2E6598FF) rgba(57729DFF) rgba(9F9FAAFF) 45deg col.inactive_border = rgba(2E659866) } ================================================ FILE: eww/windows/overview.yuck ================================================ (defwidget overview [] (overlay (box :orientation "v" :class "overview-window" ; :space-evenly false ; (label :text "${wsjsona}") ; (label :text "${selected}") (box :orientation "h" (for wspace in wsjsona (box ; Note: height 100px width 356px :class "overview-ws" (box :orientation "v" (for ws-window in wspace (eventbox :onrightclick "scripts/selectwindow ${ws-window.address} '${EWW_CMD}' ${ws-window.workspace.id}" :onmiddleclick "hyprctl dispatch closewindow address:${ws-window.address}" :onclick "scripts/focuswindow ${ws-window.address} ${ws-window.workspace.id} && ${EWW_CMD} close overview" (box :class "overview-ws-window" :orientation "h" :space-evenly false :spacing 10 :style "${ws-window.address == selected ? 'border: 2px solid #FFFFFF' : ''}; ${ws-window.address == '_none' ? 'border: none' : ''};" (box :class "overview-icon" :style "background-image: url('${ws-window.icon}')" ) (box :orientation "v" :space-evenly false :valign "center" (label :xalign 0 :halign "start" :class "overview-ws-text" :text "${ws-window.title}" :limit-width 28 :wrap false ) (label :xalign 0 :halign "start" :class "overview-ws-subtext" :text "${ws-window.class}" :limit-width 30 :wrap false ) ) ) ) ) ) ) ) ) (box :orientation "h" (for wspace in wsjsonb (box ; Note: height 100px width 178px :class "overview-ws" (box :orientation "v" (for ws-window in wspace (eventbox :onrightclick "scripts/selectwindow ${ws-window.address} '${EWW_CMD}' ${ws-window.workspace.id}" :onmiddleclick "hyprctl dispatch closewindow address:${ws-window.address}" :onclick "scripts/focuswindow ${ws-window.address} ${ws-window.workspace.id} && ${EWW_CMD} close overview" (box :class "overview-ws-window" :orientation "h" :space-evenly false :spacing 10 :style "${ws-window.address == selected ? 'border: 2px solid #FFFFFF' : ''}; ${ws-window.address == '_none' ? 'border: none' : ''};" (box :class "overview-icon" :style "background-image: url('${ws-window.icon}')" ) (box :orientation "v" :space-evenly false :valign "center" (label :xalign 0 :halign "start" :class "overview-ws-text" :text "${ws-window.title}" :limit-width 28 :wrap false ) (label :xalign 0 :halign "start" :class "overview-ws-subtext" :text "${ws-window.class}" :limit-width 30 :wrap false ) ) ) ) ) ) ) ) ) ) ) ) (defwidget testing [] (box :class "overview-window" (overlay (box :class "overview-ws-window" :style "margin: 2px;" ) ) ) ) (defwindow overview :wm-ignore true :monitor 0 :geometry (geometry :x "300px" :y "32px" :anchor "center" :width "1780px" :height "405px" ) ; (testing) (overview) ) ================================================ FILE: hypr/desktop-portals.sh ================================================ #!/bin/sh echo "amogus" > ~/.config/hypr/portals-log sleep 1 killall xdg-desktop-portal-hyprland killall xdg-desktop-portal-wlr killall xdg-desktop-portal /usr/lib/xdg-desktop-portal-hyprland & sleep 2 /usr/lib/xdg-desktop-portal & ================================================ FILE: hypr/hyprland.conf ================================================ # Catppuccin Hyprland config # Catppuccin colors source = ~/.config/hypr/mocha.conf #monitor=,preferred,auto,1 monitor = DP-1,3840x2160@60,5760x0,2 monitor = DP-2,3840x2160@60,1920x0,1 monitor = eDP-1,1920x1080@60,0x0,1 workspace=eDP-1,1 workspace=DP-2,2 workspace=DP-1,3 # Startup programs and scipts exec-once = sh .config/hypr/desktop-portals.sh exec-once = sh .config/hypr/per-monitor-launcher.sh # My bar and wallpaper are set depending on the monitor exec-once = dunst exec-once = ckb-next -b exec-once = hyprctl setcursor Bibata-Modern-Classic 24 exec-once = /usr/lib/polkit-kde-authentication-agent-1 exec-once = swayidle -w before-sleep swaylock exec = sh .config/hypr/scripts/get-last-focused-window.sh exec = eww daemon #exec-once = sleep 2 & swaylock input { kb_layout = ca kb_variant = multix kb_model = kb_options = kb_rules = numlock_by_default=true follow_mouse = 1 touchpad { natural_scroll = yes } sensitivity = 0 # -1.0 - 1.0, 0 means no modification. } gestures { workspace_swipe=1 workspace_swipe_distance=400 workspace_swipe_invert=1 workspace_swipe_min_speed_to_force=30 workspace_swipe_cancel_ratio=0.5 workspace_swipe_create_new=0 workspace_swipe_forever=1 } general { gaps_in = 10 gaps_out = 20 border_size = 3 col.active_border=$teal col.inactive_border=$surface2 layout = dwindle } decoration { rounding = 15 blur = no blur_size = 9 blur_passes = 4 blur_new_optimizations = on drop_shadow = yes shadow_range = 15 shadow_render_power = 3 col.shadow = rgba(000000ee) dim_inactive = false dim_strength = 0.2 multisample_edges = true } animations { enabled = yes bezier = myBezier, 0.05, 0.9, 0.1, 1.05 bezier = myBezier2, 0.65, 0, 0.35, 1 bezier=slow,0,0.85,0.3,1 bezier=overshot,0.7,0.6,0.1,1.1 bezier=bounce,1,1.6,0.1,0.85 bezier=slingshot,1,-1,0.15,1.25 bezier=nice,0,6.9,0.5,-4.20 animation=windows,1,5,bounce,popin animation=border,1,20,default animation=fade,1,5,default animation=workspaces,1,5,overshot,slide } dwindle { pseudotile = yes # master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below preserve_split = yes # you probably want this col.group_border = $surface2 col.group_border_active = $teal } master { new_is_master = true } gestures { workspace_swipe = on } device:epic mouse V1 { sensitivity = -0.5 } binds { workspace_back_and_forth = true } misc { no_vfr = true } windowrule = float, ^(pavucontrol)$ windowrule = maxsize 600 800, ^(pavucontrol)$ windowrule = center, ^(pavucontrol)$ windowrule = tile, ^(libreoffice)$ windowrule = float, ^(blueman-manager)$ windowrule = nofullscreenrequest, ^(.*libreoffice.*)$ windowrule = size 490 600, ^(org.gnome.Calculator)$ windowrule = float, ^(org.gnome.Calculator)$ windowrule = float, ^(org.kde.polkit-kde-authentication-agent-1)$ $mainMod = SUPER # Main binds bind = $mainMod, return, exec, kitty bind = $mainMod, Q, killactive, bind = $mainMod, M, exit, bind = $mainMod, E, exec, thunar bind = $mainMod, V, togglefloating, bind = $mainMod, D, exec, wofi --show drun --term=kitty --width=40% --columns 2 -I -s ~/.config/wofi/style.css bind = $mainMod, C, exec, rofi -show calc -modi calc -no-show-match -no-sort -terse -no-persist-history -theme ~/.config/rofi/style.rasi bind = $mainMod, L, exec, swaylock bind = $mainMod, G, togglegroup bind = $mainMod, F, fullscreen, bind = $mainMod, A, movetoworkspace, special bind = $mainMod, P, pseudo, # dwindle bind = $mainMod, J, togglesplit, # dwindle bind = $mainMod, B, exec, sh .config/wofi/powermenu.sh bind = $mainMod, W, exec, eww open --toggle overview && eww update selected=_none bind = $mainMod, N, exec, ~/wofi-emoji/wofi-emoji bind = $mainMod, F10, pass, ^(com\.obsproject\.Studio)$ bind = ALT, Tab, exec, hyprctl dispatch focuswindow pid:$(cat .config/hypr/scripts/last-focused-window | sed 's/.*\(pid: \([0-9]*\)\).*/\2 /') # Hardware controls using function keys bind = , XF86MonBrightnessDown, exec, brightnessctl set 10%- bind = , XF86MonBrightnessUp, exec, brightnessctl set +10% binde = , XF86AudioRaiseVolume, exec, pactl -- set-sink-volume @DEFAULT_SINK@ +5% binde = , XF86AudioLowerVolume, exec, pactl -- set-sink-volume @DEFAULT_SINK@ -5% bind = , XF86AudioMute, exec, pactl set-sink-mute @DEFAULT_SINK@ toggle # Toggle gaps bind = $mainMod, H, exec, sh .config/hypr/toggle-gaps.sh # Toggle between floating windows #bind = ALT, Tab, cyclenext, #bind = ALT, Tab, bringactivetotop, bind = $mainMod, Tab, changegroupactive, # Resize focused window with arrow keys, indicated with borders of a different color bind = $mainMod, R, exec, hyprctl --batch keyword "general:col.active_border rgba(fab387ff);" bind = $mainMod, R, exec, hyprctl --batch keyword "dwindle:col.group_border_active rgba(fab387ff);" bind = $mainMod, R, submap, resize submap = resize binde = , right, resizeactive, 10 0 binde = , left, resizeactive, -10 0 binde = , up, resizeactive, 0 -10 binde = , down, resizeactive, 0 10 bind = , escape, exec, hyprctl --batch keyword "general:col.active_border rgba(94e2d5ff);" bind = , escape, exec, hyprctl --batch keyword "dwindle:col.group_border_active rgba(94e2d5ff);" bind = , escape, submap, reset submap = reset # Change DPI on external monitor bind = $mainMod, F11, exec, hyprctl keyword monitor DP-2,3840x2160@60,0x0,1.25 bind = $mainMod, F12, exec, hyprctl keyword monitor DP-2,3840x2160@60,0x0,1 # Move focus with mainMod + arrow keys bind = $mainMod, left, movefocus, l bind = $mainMod, right, movefocus, r bind = $mainMod, up, movefocus, u bind = $mainMod, down, movefocus, d # Switch workspaces with mainMod + [0-9] bind = $mainMod, MINUS, workspace, special bind = $mainMod, 1, workspace, 1 bind = $mainMod, 2, workspace, 2 bind = $mainMod, 3, workspace, 3 bind = $mainMod, 4, workspace, 4 bind = $mainMod, 5, workspace, 5 bind = $mainMod, 6, workspace, 6 bind = $mainMod, 7, workspace, 7 bind = $mainMod, 8, workspace, 8 bind = $mainMod, 9, workspace, 9 bind = $mainMod, 0, workspace, 10 # Move active window to a workspace with mainMod + SHIFT + [0-9] bind = $mainMod SHIFT, 1, movetoworkspace, 1 bind = $mainMod SHIFT, 2, movetoworkspace, 2 bind = $mainMod SHIFT, 3, movetoworkspace, 3 bind = $mainMod SHIFT, 4, movetoworkspace, 4 bind = $mainMod SHIFT, 5, movetoworkspace, 5 bind = $mainMod SHIFT, 6, movetoworkspace, 6 bind = $mainMod SHIFT, 7, movetoworkspace, 7 bind = $mainMod SHIFT, 8, movetoworkspace, 8 bind = $mainMod SHIFT, 9, movetoworkspace, 9 bind = $mainMod SHIFT, 0, movetoworkspace, 10 # Scroll through existing workspaces with mainMod + scroll bind = $mainMod, mouse_down, workspace, e+1 bind = $mainMod, mouse_up, workspace, e-1 # Move/resize windows with mainMod + LMB/RMB and dragging bindm = $mainMod, mouse:272, movewindow bindm = $mainMod, mouse:273, resizewindow bind = $mainMod SHIFT, left, movewindow, l bind = $mainMod SHIFT, right, movewindow, r bind = $mainMod SHIFT, up, movewindow, u bind = $mainMod SHIFT, down, movewindow, d bind = $mainMod CTRL, left, workspace, e-1 bind = $mainMod CTRL, right, workspace, e+1 # Take a screenshot bind = $mainMod,Print, exec, grim -g "$(slurp)" "$HOME/Pictures/screenshots/$(date +'%s_grim.png')" bind = , Print, exec, grim -g "$(slurp -d)" - | wl-copy exec-once = systemctl --user import-environment WAYLAND_DISPLAY XDG_CURRENT_DESKTOP exec-once = dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP ================================================ FILE: hypr/hyprpaper-desktop.conf ================================================ preload = Pictures/wallpapers/catppuccin-custom-darker-corners-desktop.png preload = Pictures/wallpapers/catppuccin-custom-darker.png preload = Pictures/wallpapers/result.png wallpaper = DP-2,Pictures/wallpapers/catppuccin-custom-darker-corners-desktop.png wallpaper = eDP-1,Pictures/wallpapers/catppuccin-custom-darker.png ================================================ FILE: hypr/hyprpaper-laptop.conf ================================================ preload = Pictures/wallpapers/catppuccin-custom-darker-corners.png wallpaper = ,Pictures/wallpapers/catppuccin-custom-darker-corners.png ================================================ FILE: hypr/mocha.conf ================================================ $rosewater = 0xfff5e0dc $flamingo = 0xfff2cdcd $pink = 0xfff5c2e7 $mauve = 0xffcba6f7 $red = 0xfff38ba8 $maroon = 0xffeba0ac $peach = 0xfffab387 $yellow = 0xfff9e2af $green = 0xffa6e3a1 $teal = 0xff94e2d5 $sky = 0xff89dceb $sapphire = 0xff74c7ec $blue = 0xff89b4fa $lavender = 0xffb4befe $text = 0xffcdd6f4 $subtext1 = 0xffbac2de $subtext0 = 0xffa6adc8 $overlay2 = 0xff9399b2 $overlay1 = 0xff7f849c $overlay0 = 0xff6c7086 $surface2 = 0xff585b70 $surface1 = 0xff45475a $surface0 = 0xff313244 $base = 0xff1e1e2e $mantle = 0xff181825 $crust = 0xff11111b ================================================ FILE: hypr/per-monitor-launcher.sh ================================================ #!/bin/sh pkill waybar pkill hyprpaper m=$(printenv LAPTOP) if [ $m = 1 ]; then hyprpaper -c .config/hypr/hyprpaper-laptop.conf & sleep 2 & waybar --config .config/waybar/laptop-bar/config --style .config/waybar/laptop-bar/style.css else hyprpaper -c .config/hypr/hyprpaper-desktop.conf & sleep 2 & waybar --config .config/waybar/desktop-bar/config --style .config/waybar/desktop-bar/style.css fi ================================================ FILE: hypr/portals-log ================================================ amogus ================================================ FILE: hypr/scripts/focused-window ================================================ Window a9ea0840 -> git add -A: at: 973,73 size: 924,984 workspace: 1 (1) floating: 0 monitor: 0 class: kitty title: git add -A pid: 158327 xwayland: 0 pinned: 0 fullscreen: 0 fullscreenmode: 0 fakefullscreen: 0 grouped: 0 swallowing: 0 ================================================ FILE: hypr/scripts/get-last-focused-window.sh ================================================ #!/bin/sh function handle { if [[ ${1:0:12} == "activewindow" ]]; then if [[ $1 != "activewindow>>," ]]; then cat ~/.config/hypr/scripts/focused-window > ~/.config/hypr/scripts/last-focused-window window=$(hyprctl activewindow) echo $window > ~/.config/hypr/scripts/focused-window #notify-send $1 fi fi } socat - UNIX-CONNECT:/tmp/hypr/$(echo $HYPRLAND_INSTANCE_SIGNATURE)/.socket2.sock | while read line; do handle $line; done ================================================ FILE: hypr/scripts/last-focused-window ================================================ Window a9ea0840 -> mathis_hyprland@LEGION-Mathis:~/hyppuccin: at: 973,73 size: 924,984 workspace: 1 (1) floating: 0 monitor: 0 class: kitty title: mathis_hyprland@LEGION-Mathis:~/hyppuccin pid: 158327 xwayland: 0 pinned: 0 fullscreen: 0 fullscreenmode: 0 fakefullscreen: 0 grouped: 0 swallowing: 0 ================================================ FILE: hypr/toggle-gaps.sh ================================================ #!/bin/sh TOGGLE=$HOME/.toggle if [ ! -e $TOGGLE ]; then touch $TOGGLE hyprctl keyword general:gaps_in 0 hyprctl keyword general:gaps_out 0 hyprctl keyword decoration:rounding 0 else rm $TOGGLE hyprctl keyword general:gaps_in 10 hyprctl keyword general:gaps_out 20 hyprctl keyword decoration:rounding 15 fi ================================================ FILE: kitty/kitty.conf ================================================ # vim:fileencoding=utf-8:foldmethod=marker #: Fonts {{{ #: kitty has very powerful font management. You can configure #: individual font faces and even specify special fonts for particular #: characters. # font_family monospace # bold_font auto # italic_font auto # bold_italic_font auto #: You can specify different fonts for the bold/italic/bold-italic #: variants. To get a full list of supported fonts use the `kitty #: +list-fonts` command. By default they are derived automatically, by #: the OSes font system. When bold_font or bold_italic_font is set to #: auto on macOS, the priority of bold fonts is semi-bold, bold, #: heavy. Setting them manually is useful for font families that have #: many weight variants like Book, Medium, Thick, etc. For example:: font_family SF Mono #: bold_font Operator Mono Medium #: italic_font Operator Mono Book Italic #: bold_italic_font Operator Mono Medium Italic font_size 12.0 #: Font size (in pts) # force_ltr no #: kitty does not support BIDI (bidirectional text), however, for RTL #: scripts, words are automatically displayed in RTL. That is to say, #: in an RTL script, the words "HELLO WORLD" display in kitty as #: "WORLD HELLO", and if you try to select a substring of an RTL- #: shaped string, you will get the character that would be there had #: the the string been LTR. For example, assuming the Hebrew word #: ירושלים, selecting the character that on the screen appears to be ם #: actually writes into the selection buffer the character י. kitty's #: default behavior is useful in conjunction with a filter to reverse #: the word order, however, if you wish to manipulate RTL glyphs, it #: can be very challenging to work with, so this option is provided to #: turn it off. Furthermore, this option can be used with the command #: line program GNU FriBidi #: to get BIDI #: support, because it will force kitty to always treat the text as #: LTR, which FriBidi expects for terminals. # symbol_map #: E.g. symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols #: Map the specified Unicode codepoints to a particular font. Useful #: if you need special rendering for some symbols, such as for #: Powerline. Avoids the need for patched fonts. Each Unicode code #: point is specified in the form `U+`. You #: can specify multiple code points, separated by commas and ranges #: separated by hyphens. This option can be specified multiple times. #: The syntax is:: #: symbol_map codepoints Font Family Name # narrow_symbols #: E.g. narrow_symbols U+E0A0-U+E0A3,U+E0C0-U+E0C7 1 #: Usually, for Private Use Unicode characters and some symbol/dingbat #: characters, if the character is followed by one or more spaces, #: kitty will use those extra cells to render the character larger, if #: the character in the font has a wide aspect ratio. Using this #: option you can force kitty to restrict the specified code points to #: render in the specified number of cells (defaulting to one cell). #: This option can be specified multiple times. The syntax is:: #: narrow_symbols codepoints [optionally the number of cells] # disable_ligatures never #: Choose how you want to handle multi-character ligatures. The #: default is to always render them. You can tell kitty to not render #: them when the cursor is over them by using cursor to make editing #: easier, or have kitty never render them at all by using always, if #: you don't like them. The ligature strategy can be set per-window #: either using the kitty remote control facility or by defining #: shortcuts for it in kitty.conf, for example:: #: map alt+1 disable_ligatures_in active always #: map alt+2 disable_ligatures_in all never #: map alt+3 disable_ligatures_in tab cursor #: Note that this refers to programming ligatures, typically #: implemented using the calt OpenType feature. For disabling general #: ligatures, use the font_features option. # font_features #: E.g. font_features none #: Choose exactly which OpenType features to enable or disable. This #: is useful as some fonts might have features worthwhile in a #: terminal. For example, Fira Code includes a discretionary feature, #: zero, which in that font changes the appearance of the zero (0), to #: make it more easily distinguishable from Ø. Fira Code also includes #: other discretionary features known as Stylistic Sets which have the #: tags ss01 through ss20. #: For the exact syntax to use for individual features, see the #: HarfBuzz documentation . #: Note that this code is indexed by PostScript name, and not the font #: family. This allows you to define very precise feature settings; #: e.g. you can disable a feature in the italic font but not in the #: regular font. #: On Linux, font features are first read from the FontConfig database #: and then this option is applied, so they can be configured in a #: single, central place. #: To get the PostScript name for a font, use `kitty +list-fonts #: --psnames`: #: .. code-block:: sh #: $ kitty +list-fonts --psnames | grep Fira #: Fira Code #: Fira Code Bold (FiraCode-Bold) #: Fira Code Light (FiraCode-Light) #: Fira Code Medium (FiraCode-Medium) #: Fira Code Regular (FiraCode-Regular) #: Fira Code Retina (FiraCode-Retina) #: The part in brackets is the PostScript name. #: Enable alternate zero and oldstyle numerals:: #: font_features FiraCode-Retina +zero +onum #: Enable only alternate zero in the bold font:: #: font_features FiraCode-Bold +zero #: Disable the normal ligatures, but keep the calt feature which (in #: this font) breaks up monotony:: #: font_features TT2020StyleB-Regular -liga +calt #: In conjunction with force_ltr, you may want to disable Arabic #: shaping entirely, and only look at their isolated forms if they #: show up in a document. You can do this with e.g.:: #: font_features UnifontMedium +isol -medi -fina -init # modify_font #: Modify font characteristics such as the position or thickness of #: the underline and strikethrough. The modifications can have the #: suffix px for pixels or % for percentage of original value. No #: suffix means use pts. For example:: #: modify_font underline_position -2 #: modify_font underline_thickness 150% #: modify_font strikethrough_position 2px #: Additionally, you can modify the size of the cell in which each #: font glyph is rendered and the baseline at which the glyph is #: placed in the cell. For example:: #: modify_font cell_width 80% #: modify_font cell_height -2px #: modify_font baseline 3 #: Note that modifying the baseline will automatically adjust the #: underline and strikethrough positions by the same amount. #: Increasing the baseline raises glyphs inside the cell and #: decreasing it lowers them. Decreasing the cell size might cause #: rendering artifacts, so use with care. box_drawing_scale 0.001, 1, 1.5, 2 #: The sizes of the lines used for the box drawing Unicode characters. #: These values are in pts. They will be scaled by the monitor DPI to #: arrive at a pixel value. There must be four values corresponding to #: thin, normal, thick, and very thick lines. #: }}} #: Cursor customization {{{ # cursor #cccccc #: Default cursor color. If set to the special value none the cursor #: will be rendered with a "reverse video" effect. It's color will be #: the color of the text in the cell it is over and the text will be #: rendered with the background color of the cell. Note that if the #: program running in the terminal sets a cursor color, this takes #: precedence. Also, the cursor colors are modified if the cell #: background and foreground colors have very low contrast. # cursor_text_color #111111 #: The color of text under the cursor. If you want it rendered with #: the background color of the cell underneath instead, use the #: special keyword: background. Note that if cursor is set to none #: then this option is ignored. # cursor_shape block #: The cursor shape can be one of block, beam, underline. Note that #: when reloading the config this will be changed only if the cursor #: shape has not been set by the program running in the terminal. This #: sets the default cursor shape, applications running in the terminal #: can override it. In particular, shell integration #: in kitty sets #: the cursor shape to beam at shell prompts. You can avoid this by #: setting shell_integration to no-cursor. # cursor_beam_thickness 1.5 #: The thickness of the beam cursor (in pts). # cursor_underline_thickness 2.0 #: The thickness of the underline cursor (in pts). # cursor_blink_interval -1 #: The interval to blink the cursor (in seconds). Set to zero to #: disable blinking. Negative values mean use system default. Note #: that the minimum interval will be limited to repaint_delay. # cursor_stop_blinking_after 15.0 #: Stop blinking cursor after the specified number of seconds of #: keyboard inactivity. Set to zero to never stop blinking. #: }}} #: Scrollback {{{ # scrollback_lines 2000 #: Number of lines of history to keep in memory for scrolling back. #: Memory is allocated on demand. Negative numbers are (effectively) #: infinite scrollback. Note that using very large scrollback is not #: recommended as it can slow down performance of the terminal and #: also use large amounts of RAM. Instead, consider using #: scrollback_pager_history_size. Note that on config reload if this #: is changed it will only affect newly created windows, not existing #: ones. # scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER #: Program with which to view scrollback in a new window. The #: scrollback buffer is passed as STDIN to this program. If you change #: it, make sure the program you use can handle ANSI escape sequences #: for colors and text formatting. INPUT_LINE_NUMBER in the command #: line above will be replaced by an integer representing which line #: should be at the top of the screen. Similarly CURSOR_LINE and #: CURSOR_COLUMN will be replaced by the current cursor position or #: set to 0 if there is no cursor, for example, when showing the last #: command output. # scrollback_pager_history_size 0 #: Separate scrollback history size (in MB), used only for browsing #: the scrollback buffer with pager. This separate buffer is not #: available for interactive scrolling but will be piped to the pager #: program when viewing scrollback buffer in a separate window. The #: current implementation stores the data in UTF-8, so approximatively #: 10000 lines per megabyte at 100 chars per line, for pure ASCII, #: unformatted text. A value of zero or less disables this feature. #: The maximum allowed size is 4GB. Note that on config reload if this #: is changed it will only affect newly created windows, not existing #: ones. # scrollback_fill_enlarged_window no #: Fill new space with lines from the scrollback buffer after #: enlarging a window. # wheel_scroll_multiplier 5.0 #: Multiplier for the number of lines scrolled by the mouse wheel. #: Note that this is only used for low precision scrolling devices, #: not for high precision scrolling devices on platforms such as macOS #: and Wayland. Use negative numbers to change scroll direction. See #: also wheel_scroll_min_lines. # wheel_scroll_min_lines 1 #: The minimum number of lines scrolled by the mouse wheel. The scroll #: multiplier wheel_scroll_multiplier only takes effect after it #: reaches this number. Note that this is only used for low precision #: scrolling devices like wheel mice that scroll by very small amounts #: when using the wheel. With a negative number, the minimum number of #: lines will always be added. # touch_scroll_multiplier 1.0 #: Multiplier for the number of lines scrolled by a touchpad. Note #: that this is only used for high precision scrolling devices on #: platforms such as macOS and Wayland. Use negative numbers to change #: scroll direction. #: }}} #: Mouse {{{ # mouse_hide_wait 3.0 #: Hide mouse cursor after the specified number of seconds of the #: mouse not being used. Set to zero to disable mouse cursor hiding. #: Set to a negative value to hide the mouse cursor immediately when #: typing text. Disabled by default on macOS as getting it to work #: robustly with the ever-changing sea of bugs that is Cocoa is too #: much effort. # url_color #0087bd # url_style curly #: The color and style for highlighting URLs on mouse-over. url_style #: can be one of: none, straight, double, curly, dotted, dashed. # open_url_with default #: The program to open clicked URLs. The special value default with #: first look for any URL handlers defined via the open_actions #: facility and if non #: are found, it will use the Operating System's default URL handler #: (open on macOS and xdg-open on Linux). # url_prefixes file ftp ftps gemini git gopher http https irc ircs kitty mailto news sftp ssh #: The set of URL prefixes to look for when detecting a URL under the #: mouse cursor. # detect_urls yes #: Detect URLs under the mouse. Detected URLs are highlighted with an #: underline and the mouse cursor becomes a hand over them. Even if #: this option is disabled, URLs are still clickable. # url_excluded_characters #: Additional characters to be disallowed from URLs, when detecting #: URLs under the mouse cursor. By default, all characters that are #: legal in URLs are allowed. # copy_on_select no #: Copy to clipboard or a private buffer on select. With this set to #: clipboard, selecting text with the mouse will cause the text to be #: copied to clipboard. Useful on platforms such as macOS that do not #: have the concept of primary selection. You can instead specify a #: name such as a1 to copy to a private kitty buffer. Map a shortcut #: with the paste_from_buffer action to paste from this private #: buffer. For example:: #: copy_on_select a1 #: map shift+cmd+v paste_from_buffer a1 #: Note that copying to the clipboard is a security risk, as all #: programs, including websites open in your browser can read the #: contents of the system clipboard. # paste_actions quote-urls-at-prompt #: A comma separated list of actions to take when pasting text into #: the terminal. The supported paste actions are: #: quote-urls-at-prompt: #: If the text being pasted is a URL and the cursor is at a shell prompt, #: automatically quote the URL (needs shell_integration). #: confirm: #: Confirm the paste if bracketed paste mode is not active or there is more #: a large amount of text being pasted. #: filter: #: Run the filter_paste() function from the file paste-actions.py in #: the kitty config directory on the pasted text. The text returned by the #: function will be actually pasted. # strip_trailing_spaces never #: Remove spaces at the end of lines when copying to clipboard. A #: value of smart will do it when using normal selections, but not #: rectangle selections. A value of always will always do it. # select_by_word_characters @-./_~?&=%+# #: Characters considered part of a word when double clicking. In #: addition to these characters any character that is marked as an #: alphanumeric character in the Unicode database will be matched. # select_by_word_characters_forward #: Characters considered part of a word when extending the selection #: forward on double clicking. In addition to these characters any #: character that is marked as an alphanumeric character in the #: Unicode database will be matched. #: If empty (default) select_by_word_characters will be used for both #: directions. # click_interval -1.0 #: The interval between successive clicks to detect double/triple #: clicks (in seconds). Negative numbers will use the system default #: instead, if available, or fallback to 0.5. # focus_follows_mouse no #: Set the active window to the window under the mouse when moving the #: mouse around. # pointer_shape_when_grabbed arrow #: The shape of the mouse pointer when the program running in the #: terminal grabs the mouse. Valid values are: arrow, beam and hand. # default_pointer_shape beam #: The default shape of the mouse pointer. Valid values are: arrow, #: beam and hand. # pointer_shape_when_dragging beam #: The default shape of the mouse pointer when dragging across text. #: Valid values are: arrow, beam and hand. #: Mouse actions {{{ #: Mouse buttons can be mapped to perform arbitrary actions. The #: syntax is: #: .. code-block:: none #: mouse_map button-name event-type modes action #: Where button-name is one of left, middle, right, b1 ... b8 with #: added keyboard modifiers. For example: ctrl+shift+left refers to #: holding the Ctrl+Shift keys while clicking with the left mouse #: button. The value b1 ... b8 can be used to refer to up to eight #: buttons on a mouse. #: event-type is one of press, release, doublepress, triplepress, #: click, doubleclick. modes indicates whether the action is performed #: when the mouse is grabbed by the program running in the terminal, #: or not. The values are grabbed or ungrabbed or a comma separated #: combination of them. grabbed refers to when the program running in #: the terminal has requested mouse events. Note that the click and #: double click events have a delay of click_interval to disambiguate #: from double and triple presses. #: You can run kitty with the kitty --debug-input command line option #: to see mouse events. See the builtin actions below to get a sense #: of what is possible. #: If you want to unmap an action, map it to no_op. For example, to #: disable opening of URLs with a plain click:: #: mouse_map left click ungrabbed no_op #: See all the mappable actions including mouse actions here #: . #: .. note:: #: Once a selection is started, releasing the button that started it will #: automatically end it and no release event will be dispatched. # clear_all_mouse_actions no #: Remove all mouse action definitions up to this point. Useful, for #: instance, to remove the default mouse actions. #: Click the link under the mouse or move the cursor # mouse_map left click ungrabbed mouse_handle_click selection link prompt #:: First check for a selection and if one exists do nothing. Then #:: check for a link under the mouse cursor and if one exists, click #:: it. Finally check if the click happened at the current shell #:: prompt and if so, move the cursor to the click location. Note #:: that this requires shell integration #:: to work. #: Click the link under the mouse or move the cursor even when grabbed # mouse_map shift+left click grabbed,ungrabbed mouse_handle_click selection link prompt #:: Same as above, except that the action is performed even when the #:: mouse is grabbed by the program running in the terminal. #: Click the link under the mouse cursor # mouse_map ctrl+shift+left release grabbed,ungrabbed mouse_handle_click link #:: Variant with Ctrl+Shift is present because the simple click based #:: version has an unavoidable delay of click_interval, to #:: disambiguate clicks from double clicks. #: Discard press event for link click # mouse_map ctrl+shift+left press grabbed discard_event #:: Prevent this press event from being sent to the program that has #:: grabbed the mouse, as the corresponding release event is used to #:: open a URL. #: Paste from the primary selection # mouse_map middle release ungrabbed paste_from_selection #: Start selecting text # mouse_map left press ungrabbed mouse_selection normal #: Start selecting text in a rectangle # mouse_map ctrl+alt+left press ungrabbed mouse_selection rectangle #: Select a word # mouse_map left doublepress ungrabbed mouse_selection word #: Select a line # mouse_map left triplepress ungrabbed mouse_selection line #: Select line from point # mouse_map ctrl+alt+left triplepress ungrabbed mouse_selection line_from_point #:: Select from the clicked point to the end of the line. #: Extend the current selection # mouse_map right press ungrabbed mouse_selection extend #:: If you want only the end of the selection to be moved instead of #:: the nearest boundary, use move-end instead of extend. #: Paste from the primary selection even when grabbed # mouse_map shift+middle release ungrabbed,grabbed paste_selection # mouse_map shift+middle press grabbed discard_event #: Start selecting text even when grabbed # mouse_map shift+left press ungrabbed,grabbed mouse_selection normal #: Start selecting text in a rectangle even when grabbed # mouse_map ctrl+shift+alt+left press ungrabbed,grabbed mouse_selection rectangle #: Select a word even when grabbed # mouse_map shift+left doublepress ungrabbed,grabbed mouse_selection word #: Select a line even when grabbed # mouse_map shift+left triplepress ungrabbed,grabbed mouse_selection line #: Select line from point even when grabbed # mouse_map ctrl+shift+alt+left triplepress ungrabbed,grabbed mouse_selection line_from_point #:: Select from the clicked point to the end of the line even when #:: grabbed. #: Extend the current selection even when grabbed # mouse_map shift+right press ungrabbed,grabbed mouse_selection extend #: Show clicked command output in pager # mouse_map ctrl+shift+right press ungrabbed mouse_show_command_output #:: Requires shell integration #:: to work. #: }}} #: }}} #: Performance tuning {{{ # repaint_delay 10 #: Delay between screen updates (in milliseconds). Decreasing it, #: increases frames-per-second (FPS) at the cost of more CPU usage. #: The default value yields ~100 FPS which is more than sufficient for #: most uses. Note that to actually achieve 100 FPS, you have to #: either set sync_to_monitor to no or use a monitor with a high #: refresh rate. Also, to minimize latency when there is pending input #: to be processed, this option is ignored. # input_delay 3 #: Delay before input from the program running in the terminal is #: processed (in milliseconds). Note that decreasing it will increase #: responsiveness, but also increase CPU usage and might cause flicker #: in full screen programs that redraw the entire screen on each loop, #: because kitty is so fast that partial screen updates will be drawn. # sync_to_monitor yes #: Sync screen updates to the refresh rate of the monitor. This #: prevents screen tearing #: when scrolling. #: However, it limits the rendering speed to the refresh rate of your #: monitor. With a very high speed mouse/high keyboard repeat rate, #: you may notice some slight input latency. If so, set this to no. #: }}} #: Terminal bell {{{ # enable_audio_bell yes #: The audio bell. Useful to disable it in environments that require #: silence. # visual_bell_duration 0.0 #: The visual bell duration (in seconds). Flash the screen when a bell #: occurs for the specified number of seconds. Set to zero to disable. # visual_bell_color none #: The color used by visual bell. Set to none will fall back to #: selection background color. If you feel that the visual bell is too #: bright, you can set it to a darker color. # window_alert_on_bell yes #: Request window attention on bell. Makes the dock icon bounce on #: macOS or the taskbar flash on linux. # bell_on_tab "🔔 " #: Some text or a Unicode symbol to show on the tab if a window in the #: tab that does not have focus has a bell. If you want to use leading #: or trailing spaces, surround the text with quotes. See #: tab_title_template for how this is rendered. #: For backwards compatibility, values of yes, y and true are #: converted to the default bell symbol and no, n, false and none are #: converted to the empty string. # command_on_bell none #: Program to run when a bell occurs. The environment variable #: KITTY_CHILD_CMDLINE can be used to get the program running in the #: window in which the bell occurred. # bell_path none #: Path to a sound file to play as the bell sound. If set to none, the #: system default bell sound is used. Must be in a format supported by #: the operating systems sound API, such as WAV or OGA on Linux #: (libcanberra) or AIFF, MP3 or WAV on macOS (NSSound) #: }}} #: Window layout {{{ # remember_window_size yes # initial_window_width 640 # initial_window_height 400 #: If enabled, the window size will be remembered so that new #: instances of kitty will have the same size as the previous #: instance. If disabled, the window will initially have size #: configured by initial_window_width/height, in pixels. You can use a #: suffix of "c" on the width/height values to have them interpreted #: as number of cells instead of pixels. # enabled_layouts * #: The enabled window layouts. A comma separated list of layout names. #: The special value all means all layouts. The first listed layout #: will be used as the startup layout. Default configuration is all #: layouts in alphabetical order. For a list of available layouts, see #: the layouts . # window_resize_step_cells 2 # window_resize_step_lines 2 #: The step size (in units of cell width/cell height) to use when #: resizing kitty windows in a layout with the shortcut #: start_resizing_window. The cells value is used for horizontal #: resizing, and the lines value is used for vertical resizing. # window_border_width 0.5pt #: The width of window borders. Can be either in pixels (px) or pts #: (pt). Values in pts will be rounded to the nearest number of pixels #: based on screen resolution. If not specified, the unit is assumed #: to be pts. Note that borders are displayed only when more than one #: window is visible. They are meant to separate multiple windows. # draw_minimal_borders yes #: Draw only the minimum borders needed. This means that only the #: borders that separate the inactive window from a neighbor are #: drawn. Note that setting a non-zero window_margin_width overrides #: this and causes all borders to be drawn. window_margin_width 15 #: The window margin (in pts) (blank area outside the border). A #: single value sets all four sides. Two values set the vertical and #: horizontal sides. Three values set top, horizontal and bottom. Four #: values set top, right, bottom and left. # single_window_margin_width -1 #: The window margin to use when only a single window is visible (in #: pts). Negative values will cause the value of window_margin_width #: to be used instead. A single value sets all four sides. Two values #: set the vertical and horizontal sides. Three values set top, #: horizontal and bottom. Four values set top, right, bottom and left. # window_padding_width 0 #: The window padding (in pts) (blank area between the text and the #: window border). A single value sets all four sides. Two values set #: the vertical and horizontal sides. Three values set top, horizontal #: and bottom. Four values set top, right, bottom and left. # placement_strategy center #: When the window size is not an exact multiple of the cell size, the #: cell area of the terminal window will have some extra padding on #: the sides. You can control how that padding is distributed with #: this option. Using a value of center means the cell area will be #: placed centrally. A value of top-left means the padding will be #: only at the bottom and right edges. # active_border_color #00ff00 #: The color for the border of the active window. Set this to none to #: not draw borders around the active window. # inactive_border_color #cccccc #: The color for the border of inactive windows. # bell_border_color #ff5a00 #: The color for the border of inactive windows in which a bell has #: occurred. # inactive_text_alpha 1.0 #: Fade the text in inactive windows by the specified amount (a number #: between zero and one, with zero being fully faded). # hide_window_decorations no #: Hide the window decorations (title-bar and window borders) with #: yes. On macOS, titlebar-only can be used to only hide the titlebar. #: Whether this works and exactly what effect it has depends on the #: window manager/operating system. Note that the effects of changing #: this option when reloading config are undefined. # window_logo_path none #: Path to a logo image. Must be in PNG format. Relative paths are #: interpreted relative to the kitty config directory. The logo is #: displayed in a corner of every kitty window. The position is #: controlled by window_logo_position. Individual windows can be #: configured to have different logos either using the launch action #: or the remote control facility. # window_logo_position bottom-right #: Where to position the window logo in the window. The value can be #: one of: top-left, top, top-right, left, center, right, bottom-left, #: bottom, bottom-right. # window_logo_alpha 0.5 #: The amount the logo should be faded into the background. With zero #: being fully faded and one being fully opaque. # resize_debounce_time 0.1 #: The time to wait before redrawing the screen when a resize event is #: received (in seconds). On platforms such as macOS, where the #: operating system sends events corresponding to the start and end of #: a resize, this number is ignored. # resize_draw_strategy static #: Choose how kitty draws a window while a resize is in progress. A #: value of static means draw the current window contents, mostly #: unchanged. A value of scale means draw the current window contents #: scaled. A value of blank means draw a blank window. A value of size #: means show the window size in cells. # resize_in_steps no #: Resize the OS window in steps as large as the cells, instead of #: with the usual pixel accuracy. Combined with initial_window_width #: and initial_window_height in number of cells, this option can be #: used to keep the margins as small as possible when resizing the OS #: window. Note that this does not currently work on Wayland. # visual_window_select_characters 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZ #: The list of characters for visual window selection. For example, #: for selecting a window to focus on with focus_visible_window. The #: value should be a series of unique numbers or alphabets, case #: insensitive, from the set [0-9A-Z]. Specify your preference as a #: string of characters. confirm_os_window_close -0 #: Ask for confirmation when closing an OS window or a tab with at #: least this number of kitty windows in it by window manager (e.g. #: clicking the window close button or pressing the operating system #: shortcut to close windows) or by the close_tab action. A value of #: zero disables confirmation. This confirmation also applies to #: requests to quit the entire application (all OS windows, via the #: quit action). Negative values are converted to positive ones, #: however, with shell_integration enabled, using negative values #: means windows sitting at a shell prompt are not counted, only #: windows where some command is currently running. Note that if you #: want confirmation when closing individual windows, you can map the #: close_window_with_confirmation action. #: }}} #: Tab bar {{{ # tab_bar_edge bottom #: The edge to show the tab bar on, top or bottom. # tab_bar_margin_width 0.0 #: The margin to the left and right of the tab bar (in pts). # tab_bar_margin_height 0.0 0.0 #: The margin above and below the tab bar (in pts). The first number #: is the margin between the edge of the OS Window and the tab bar. #: The second number is the margin between the tab bar and the #: contents of the current tab. # tab_bar_style fade #: The tab bar style, can be one of: #: fade #: Each tab's edges fade into the background color. (See also tab_fade) #: slant #: Tabs look like the tabs in a physical file. #: separator #: Tabs are separated by a configurable separator. (See also #: tab_separator) #: powerline #: Tabs are shown as a continuous line with "fancy" separators. #: (See also tab_powerline_style) #: custom #: A user-supplied Python function called draw_tab is loaded from the file #: tab_bar.py in the kitty config directory. For examples of how to #: write such a function, see the functions named draw_tab_with_* in #: kitty's source code: kitty/tab_bar.py. See also #: this discussion #: for examples from kitty users. #: hidden #: The tab bar is hidden. If you use this, you might want to create a mapping #: for the select_tab action which presents you with a list of tabs and #: allows for easy switching to a tab. # tab_bar_align left #: The horizontal alignment of the tab bar, can be one of: left, #: center, right. # tab_bar_min_tabs 2 #: The minimum number of tabs that must exist before the tab bar is #: shown. # tab_switch_strategy previous #: The algorithm to use when switching to a tab when the current tab #: is closed. The default of previous will switch to the last used #: tab. A value of left will switch to the tab to the left of the #: closed tab. A value of right will switch to the tab to the right of #: the closed tab. A value of last will switch to the right-most tab. # tab_fade 0.25 0.5 0.75 1 #: Control how each tab fades into the background when using fade for #: the tab_bar_style. Each number is an alpha (between zero and one) #: that controls how much the corresponding cell fades into the #: background, with zero being no fade and one being full fade. You #: can change the number of cells used by adding/removing entries to #: this list. # tab_separator " ┇" #: The separator between tabs in the tab bar when using separator as #: the tab_bar_style. # tab_powerline_style angled #: The powerline separator style between tabs in the tab bar when #: using powerline as the tab_bar_style, can be one of: angled, #: slanted, round. # tab_activity_symbol none #: Some text or a Unicode symbol to show on the tab if a window in the #: tab that does not have focus has some activity. If you want to use #: leading or trailing spaces, surround the text with quotes. See #: tab_title_template for how this is rendered. # tab_title_template "{fmt.fg.red}{bell_symbol}{activity_symbol}{fmt.fg.tab}{title}" #: A template to render the tab title. The default just renders the #: title with optional symbols for bell and activity. If you wish to #: include the tab-index as well, use something like: {index}:{title}. #: Useful if you have shortcuts mapped for goto_tab N. If you prefer #: to see the index as a superscript, use {sup.index}. All data #: available is: #: title #: The current tab title. #: index #: The tab index useable with goto_tab N goto_tab shortcuts. #: layout_name #: The current layout name. #: num_windows #: The number of windows in the tab. #: num_window_groups #: The number of window groups (not counting overlay windows) in the tab. #: tab.active_wd #: The working directory of the currently active window in the tab (expensive, #: requires syscall). #: max_title_length #: The maximum title length available. #: Note that formatting is done by Python's string formatting #: machinery, so you can use, for instance, {layout_name[:2].upper()} #: to show only the first two letters of the layout name, upper-cased. #: If you want to style the text, you can use styling directives, for #: example: #: `{fmt.fg.red}red{fmt.fg.tab}normal{fmt.bg._00FF00}greenbg{fmt.bg.tab}`. #: Similarly, for bold and italic: #: `{fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}`. #: Note that for backward compatibility, if {bell_symbol} or #: {activity_symbol} are not present in the template, they are #: prepended to it. # active_tab_title_template none #: Template to use for active tabs. If not specified falls back to #: tab_title_template. # active_tab_foreground #000 # active_tab_background #eee # active_tab_font_style bold-italic # inactive_tab_foreground #444 # inactive_tab_background #999 # inactive_tab_font_style normal #: Tab bar colors and styles. # tab_bar_background none #: Background color for the tab bar. Defaults to using the terminal #: background color. # tab_bar_margin_color none #: Color for the tab bar margin area. Defaults to using the terminal #: background color. #: }}} # The basic colors foreground #CDD6F4 background #1E1E2E selection_foreground #1E1E2E selection_background #F5E0DC #: The foreground and background colors. background_opacity 1.0 #: The opacity of the background. A number between zero and one, where #: one is opaque and zero is fully transparent. This will only work if #: supported by the OS (for instance, when using a compositor under #: X11). Note that it only sets the background color's opacity in #: cells that have the same background color as the default terminal #: background, so that things like the status bar in vim, powerline #: prompts, etc. still look good. But it means that if you use a color #: theme with a background color in your editor, it will not be #: rendered as transparent. Instead you should change the default #: background color in your kitty config and not use a background #: color in the editor color scheme. Or use the escape codes to set #: the terminals default colors in a shell script to launch your #: editor. Be aware that using a value less than 1.0 is a (possibly #: significant) performance hit. If you want to dynamically change #: transparency of windows, set dynamic_background_opacity to yes #: (this is off by default as it has a performance cost). Changing #: this option when reloading the config will only work if #: dynamic_background_opacity was enabled in the original config. # background_image none #: Path to a background image. Must be in PNG format. # background_image_layout tiled #: Whether to tile, scale or clamp the background image. The value can #: be one of tiled, mirror-tiled, scaled, clamped or centered. # background_image_linear no #: When background image is scaled, whether linear interpolation #: should be used. # dynamic_background_opacity no #: Allow changing of the background_opacity dynamically, using either #: keyboard shortcuts (increase_background_opacity and #: decrease_background_opacity) or the remote control facility. #: Changing this option by reloading the config is not supported. # background_tint 0.0 #: How much to tint the background image by the background color. #: This option makes it easier to read the text. Tinting is done using #: the current background color for each window. This option applies #: only if background_opacity is set and transparent windows are #: supported or background_image is set. # dim_opacity 0.75 #: How much to dim text that has the DIM/FAINT attribute set. One #: means no dimming and zero means fully dimmed (i.e. invisible). # selection_foreground #000000 # selection_background #fffacd #: The foreground and background colors for text selected with the #: mouse. Setting both of these to none will cause a "reverse video" #: effect for selections, where the selection will be the cell text #: color and the text will become the cell background color. Setting #: only selection_foreground to none will cause the foreground color #: to be used unchanged. Note that these colors can be overridden by #: the program running in the terminal. # Cursor colors cursor #F5E0DC cursor_text_color #1E1E2E # URL underline color when hovering with mouse url_color #F5E0DC # Kitty window border colors active_border_color #B4BEFE inactive_border_color #6C7086 bell_border_color #F9E2AF # OS Window titlebar colors wayland_titlebar_color system macos_titlebar_color system # Tab bar colors active_tab_foreground #11111B active_tab_background #CBA6F7 inactive_tab_foreground #CDD6F4 inactive_tab_background #181825 tab_bar_background #11111B # Colors for marks (marked text in the terminal) mark1_foreground #1E1E2E mark1_background #B4BEFE mark2_foreground #1E1E2E mark2_background #CBA6F7 mark3_foreground #1E1E2E mark3_background #74C7EC # The 16 terminal colors # black color0 #45475A color8 #585B70 # red color1 #F38BA8 color9 #F38BA8 # green color2 #A6E3A1 color10 #A6E3A1 # yellow color3 #F9E2AF color11 #F9E2AF # blue color4 #89B4FA color12 #89B4FA # magenta color5 #F5C2E7 color13 #F5C2E7 # cyan color6 #94E2D5 color14 #94E2D5 # white color7 #BAC2DE color15 #A6ADC8 #; }}} #; }}} #: Advanced {{{ # shell . #: The shell program to execute. The default value of . means to use #: whatever shell is set as the default shell for the current user. #: Note that on macOS if you change this, you might need to add #: --login and --interactive to ensure that the shell starts in #: interactive mode and reads its startup rc files. # editor . #: The terminal based text editor (such as vim or nano) to use when #: editing the kitty config file or similar tasks. #: The default value of . means to use the environment variables #: VISUAL and EDITOR in that order. If these variables aren't set, #: kitty will run your shell ($SHELL -l -i -c env) to see if your #: shell startup rc files set VISUAL or EDITOR. If that doesn't work, #: kitty will cycle through various known editors (vim, emacs, etc.) #: and take the first one that exists on your system. # close_on_child_death no #: Close the window when the child process (shell) exits. With the #: default value no, the terminal will remain open when the child #: exits as long as there are still processes outputting to the #: terminal (for example disowned or backgrounded processes). When #: enabled with yes, the window will close as soon as the child #: process exits. Note that setting it to yes means that any #: background processes still using the terminal can fail silently #: because their stdout/stderr/stdin no longer work. # remote_control_password #: Allow other programs to control kitty using passwords. This option #: can be specified multiple times to add multiple passwords. If no #: passwords are present kitty will ask the user for permission if a #: program tries to use remote control with a password. A password can #: also *optionally* be associated with a set of allowed remote #: control actions. For example:: #: remote_control_password "my passphrase" get-colors set-colors focus-window focus-tab #: Only the specified actions will be allowed when using this #: password. Glob patterns can be used too, for example:: #: remote_control_password "my passphrase" set-tab-* resize-* #: To get a list of available actions, run:: #: kitty @ --help #: A set of actions to be allowed when no password is sent can be #: specified by using an empty password, for example:: #: remote_control_password "" *-colors #: Finally, the path to a python module can be specified that provides #: a function is_cmd_allowed that is used to check every remote #: control command. See rc_custom_auth #: #: for details. For example:: #: remote_control_password "my passphrase" my_rc_command_checker.py #: Relative paths are resolved from the kitty configuration directory. # allow_remote_control no #: Allow other programs to control kitty. If you turn this on, other #: programs can control all aspects of kitty, including sending text #: to kitty windows, opening new windows, closing windows, reading the #: content of windows, etc. Note that this even works over SSH #: connections. The default setting of no prevents any form of remote #: control. The meaning of the various values are: #: password #: Remote control requests received over both the TTY device and the socket are #: confirmed based on passwords, see remote_control_password. #: socket-only #: Remote control requests received over a socket are accepted unconditionally. #: Requests received over the TTY are denied. See listen_on. #: socket #: Remote control requests received over a socket are accepted unconditionally. #: Requests received over the TTY are confirmed based on password. #: no #: Remote control is completely disabled. #: yes #: Remote control requests are always accepted. # listen_on none #: Listen to the specified UNIX socket for remote control connections. #: Note that this will apply to all kitty instances. It can be #: overridden by the kitty --listen-on command line option, which also #: supports listening on a TCP socket. This option accepts only UNIX #: sockets, such as unix:${TEMP}/mykitty or unix:@mykitty (on Linux). #: Environment variables are expanded and relative paths are resolved #: with respect to the temporary directory. If {kitty_pid} is present, #: then it is replaced by the PID of the kitty process, otherwise the #: PID of the kitty process is appended to the value, with a hyphen. #: See the help for kitty --listen-on for more details. Note that this #: will be ignored unless allow_remote_control is set to either: yes, #: socket or socket-only. Changing this option by reloading the config #: is not supported. # env #: Specify the environment variables to be set in all child processes. #: Using the name with an equal sign (e.g. env VAR=) will set it to #: the empty string. Specifying only the name (e.g. env VAR) will #: remove the variable from the child process' environment. Note that #: environment variables are expanded recursively, for example:: #: env VAR1=a #: env VAR2=${HOME}/${VAR1}/b #: The value of VAR2 will be /a/b. # watcher #: Path to python file which will be loaded for watchers #: . Can be #: specified more than once to load multiple watchers. The watchers #: will be added to every kitty window. Relative paths are resolved #: relative to the kitty config directory. Note that reloading the #: config will only affect windows created after the reload. # exe_search_path #: Control where kitty finds the programs to run. The default search #: order is: First search the system wide PATH, then ~/.local/bin and #: ~/bin. If still not found, the PATH defined in the login shell #: after sourcing all its startup files is tried. Finally, if present, #: the PATH specified by the env option is tried. #: This option allows you to prepend, append, or remove paths from #: this search order. It can be specified multiple times for multiple #: paths. A simple path will be prepended to the search order. A path #: that starts with the + sign will be append to the search order, #: after ~/bin above. A path that starts with the - sign will be #: removed from the entire search order. For example:: #: exe_search_path /some/prepended/path #: exe_search_path +/some/appended/path #: exe_search_path -/some/excluded/path # update_check_interval 24 #: The interval to periodically check if an update to kitty is #: available (in hours). If an update is found, a system notification #: is displayed informing you of the available update. The default is #: to check every 24 hours, set to zero to disable. Update checking is #: only done by the official binary builds. Distro packages or source #: builds do not do update checking. Changing this option by reloading #: the config is not supported. # startup_session none #: Path to a session file to use for all kitty instances. Can be #: overridden by using the kitty --session command line option for #: individual instances. See sessions #: in the kitty #: documentation for details. Note that relative paths are interpreted #: with respect to the kitty config directory. Environment variables #: in the path are expanded. Changing this option by reloading the #: config is not supported. # clipboard_control write-clipboard write-primary read-clipboard-ask read-primary-ask #: Allow programs running in kitty to read and write from the #: clipboard. You can control exactly which actions are allowed. The #: possible actions are: write-clipboard, read-clipboard, write- #: primary, read-primary, read-clipboard-ask, read-primary-ask. The #: default is to allow writing to the clipboard and primary selection #: and to ask for permission when a program tries to read from the #: clipboard. Note that disabling the read confirmation is a security #: risk as it means that any program, even the ones running on a #: remote server via SSH can read your clipboard. See also #: clipboard_max_size. # clipboard_max_size 64 #: The maximum size (in MB) of data from programs running in kitty #: that will be stored for writing to the system clipboard. A value of #: zero means no size limit is applied. See also clipboard_control. # file_transfer_confirmation_bypass #: The password that can be supplied to the file transfer kitten #: to skip the #: transfer confirmation prompt. This should only be used when #: initiating transfers from trusted computers, over trusted networks #: or encrypted transports, as it allows any programs running on the #: remote machine to read/write to the local filesystem, without #: permission. # allow_hyperlinks yes #: Process hyperlink escape sequences (OSC 8). If disabled OSC 8 #: escape sequences are ignored. Otherwise they become clickable #: links, that you can click with the mouse or by using the hints #: kitten . The #: special value of ask means that kitty will ask before opening the #: link when clicked. # shell_integration enabled #: Enable shell integration on supported shells. This enables features #: such as jumping to previous prompts, browsing the output of the #: previous command in a pager, etc. on supported shells. Set to #: disabled to turn off shell integration, completely. It is also #: possible to disable individual features, set to a space separated #: list of these values: no-rc, no-cursor, no-title, no-cwd, no- #: prompt-mark, no-complete. See Shell integration #: for details. # allow_cloning ask #: Control whether programs running in the terminal can request new #: windows to be created. The canonical example is clone-in-kitty #: . #: By default, kitty will ask for permission for each clone request. #: Allowing cloning unconditionally gives programs running in the #: terminal (including over SSH) permission to execute arbitrary code, #: as the user who is running the terminal, on the computer that the #: terminal is running on. # clone_source_strategies venv,conda,env_var,path #: Control what shell code is sourced when running clone-in-kitty in #: the newly cloned window. The supported strategies are: #: venv #: Source the file $VIRTUAL_ENV/bin/activate. This is used by the #: Python stdlib venv module and allows cloning venvs automatically. #: conda #: Run conda activate $CONDA_DEFAULT_ENV. This supports the virtual #: environments created by conda. #: env_var #: Execute the contents of the environment variable #: KITTY_CLONE_SOURCE_CODE with eval. #: path #: Source the file pointed to by the environment variable #: KITTY_CLONE_SOURCE_PATH. #: This option must be a comma separated list of the above values. #: This only source the first valid one in the above order. # term xterm-kitty #: The value of the TERM environment variable to set. Changing this #: can break many terminal programs, only change it if you know what #: you are doing, not because you read some advice on "Stack Overflow" #: to change it. The TERM variable is used by various programs to get #: information about the capabilities and behavior of the terminal. If #: you change it, depending on what programs you run, and how #: different the terminal you are changing it to is, various things #: from key-presses, to colors, to various advanced features may not #: work. Changing this option by reloading the config will only affect #: newly created windows. #: }}} #: OS specific tweaks {{{ # wayland_titlebar_color system #: The color of the kitty window's titlebar on Wayland systems with #: client side window decorations such as GNOME. A value of system #: means to use the default system color, a value of background means #: to use the background color of the currently active window and #: finally you can use an arbitrary color, such as #12af59 or red. # macos_titlebar_color system #: The color of the kitty window's titlebar on macOS. A value of #: system means to use the default system color, light or dark can #: also be used to set it explicitly. A value of background means to #: use the background color of the currently active window and finally #: you can use an arbitrary color, such as #12af59 or red. WARNING: #: This option works by using a hack when arbitrary color (or #: background) is configured, as there is no proper Cocoa API for it. #: It sets the background color of the entire window and makes the #: titlebar transparent. As such it is incompatible with #: background_opacity. If you want to use both, you are probably #: better off just hiding the titlebar with hide_window_decorations. # macos_option_as_alt no #: Use the Option key as an Alt key on macOS. With this set to no, #: kitty will use the macOS native Option+Key to enter Unicode #: character behavior. This will break any Alt+Key keyboard shortcuts #: in your terminal programs, but you can use the macOS Unicode input #: technique. You can use the values: left, right or both to use only #: the left, right or both Option keys as Alt, instead. Note that #: kitty itself always treats Option the same as Alt. This means you #: cannot use this option to configure different kitty shortcuts for #: Option+Key vs. Alt+Key. Also, any kitty shortcuts using #: Option/Alt+Key will take priority, so that any such key presses #: will not be passed to terminal programs running inside kitty. #: Changing this option by reloading the config is not supported. # macos_hide_from_tasks no #: Hide the kitty window from running tasks on macOS (⌘+Tab and the #: Dock). Changing this option by reloading the config is not #: supported. # macos_quit_when_last_window_closed no #: Have kitty quit when all the top-level windows are closed on macOS. #: By default, kitty will stay running, even with no open windows, as #: is the expected behavior on macOS. # macos_window_resizable yes #: Disable this if you want kitty top-level OS windows to not be #: resizable on macOS. Changing this option by reloading the config #: will only affect newly created OS windows. # macos_thicken_font 0 #: Draw an extra border around the font with the given width, to #: increase legibility at small font sizes on macOS. For example, a #: value of 0.75 will result in rendering that looks similar to sub- #: pixel antialiasing at common font sizes. # macos_traditional_fullscreen no #: Use the macOS traditional full-screen transition, that is faster, #: but less pretty. # macos_show_window_title_in all #: Control where the window title is displayed on macOS. A value of #: window will show the title of the currently active window at the #: top of the macOS window. A value of menubar will show the title of #: the currently active window in the macOS global menu bar, making #: use of otherwise wasted space. A value of all will show the title #: in both places, and none hides the title. See #: macos_menubar_title_max_length for how to control the length of the #: title in the menu bar. # macos_menubar_title_max_length 0 #: The maximum number of characters from the window title to show in #: the macOS global menu bar. Values less than one means that there is #: no maximum limit. # macos_custom_beam_cursor no #: Use a custom mouse cursor for macOS that is easier to see on both #: light and dark backgrounds. Nowadays, the default macOS cursor #: already comes with a white border. WARNING: this might make your #: mouse cursor invisible on dual GPU machines. Changing this option #: by reloading the config is not supported. # macos_colorspace srgb #: The colorspace in which to interpret terminal colors. The default #: of srgb will cause colors to match those seen in web browsers. The #: value of default will use whatever the native colorspace of the #: display is. The value of displayp3 will use Apple's special #: snowflake display P3 color space, which will result in over #: saturated (brighter) colors with some color shift. Reloading #: configuration will change this value only for newly created OS #: windows. # linux_display_server auto #: Choose between Wayland and X11 backends. By default, an appropriate #: backend based on the system state is chosen automatically. Set it #: to x11 or wayland to force the choice. Changing this option by #: reloading the config is not supported. #: }}} #: Keyboard shortcuts {{{ #: Keys are identified simply by their lowercase Unicode characters. #: For example: a for the A key, [ for the left square bracket key, #: etc. For functional keys, such as Enter or Escape, the names are #: present at Functional key definitions #: . #: For modifier keys, the names are ctrl (control, ⌃), shift (⇧), alt #: (opt, option, ⌥), super (cmd, command, ⌘). See also: GLFW mods #: #: On Linux you can also use XKB key names to bind keys that are not #: supported by GLFW. See XKB keys #: for a list of key names. The name to use is the part #: after the XKB_KEY_ prefix. Note that you can only use an XKB key #: name for keys that are not known as GLFW keys. #: Finally, you can use raw system key codes to map keys, again only #: for keys that are not known as GLFW keys. To see the system key #: code for a key, start kitty with the kitty --debug-input option, #: kitty will output some debug text for every key event. In that text #: look for native_code, the value of that becomes the key name in the #: shortcut. For example: #: .. code-block:: none #: on_key_input: glfw key: 0x61 native_code: 0x61 action: PRESS mods: none text: 'a' #: Here, the key name for the A key is 0x61 and you can use it with:: #: map ctrl+0x61 something #: to map Ctrl+A to something. #: You can use the special action no_op to unmap a keyboard shortcut #: that is assigned in the default configuration:: #: map kitty_mod+space no_op #: If you would like kitty to completely ignore a key event, not even #: sending it to the program running in the terminal, map it to #: discard_event:: #: map kitty_mod+f1 discard_event #: You can combine multiple actions to be triggered by a single #: shortcut with combine action, using the syntax below:: #: map key combine action1 action2 action3 ... #: For example:: #: map kitty_mod+e combine : new_window : next_layout #: This will create a new window and switch to the next available #: layout. #: You can use multi-key shortcuts with the syntax shown below:: #: map key1>key2>key3 action #: For example:: #: map ctrl+f>2 set_font_size 20 #: The full list of actions that can be mapped to key presses is #: available here . # kitty_mod ctrl+shift #: Special modifier key alias for default shortcuts. You can change #: the value of this option to alter all default shortcuts that use #: kitty_mod. # clear_all_shortcuts no #: Remove all shortcut definitions up to this point. Useful, for #: instance, to remove the default shortcuts. # action_alias #: E.g. action_alias launch_tab launch --type=tab --cwd=current #: Define action aliases to avoid repeating the same options in #: multiple mappings. Aliases can be defined for any action and will #: be expanded recursively. For example, the above alias allows you to #: create mappings to launch a new tab in the current working #: directory without duplication:: #: map f1 launch_tab vim #: map f2 launch_tab emacs #: Similarly, to alias kitten invocation:: #: action_alias hints kitten hints --hints-offset=0 # kitten_alias #: E.g. kitten_alias hints hints --hints-offset=0 #: Like action_alias above, but specifically for kittens. Generally, #: prefer to use action_alias. This option is a legacy version, #: present for backwards compatibility. It causes all invocations of #: the aliased kitten to be substituted. So the example above will #: cause all invocations of the hints kitten to have the --hints- #: offset=0 option applied. #: Clipboard {{{ #: Copy to clipboard # map kitty_mod+c copy_to_clipboard # map cmd+c copy_to_clipboard #:: There is also a copy_or_interrupt action that can be optionally #:: mapped to Ctrl+C. It will copy only if there is a selection and #:: send an interrupt otherwise. Similarly, #:: copy_and_clear_or_interrupt will copy and clear the selection or #:: send an interrupt if there is no selection. #: Paste from clipboard # map kitty_mod+v paste_from_clipboard # map cmd+v paste_from_clipboard #: Paste from selection # map kitty_mod+s paste_from_selection # map shift+insert paste_from_selection #: Pass selection to program # map kitty_mod+o pass_selection_to_program #:: You can also pass the contents of the current selection to any #:: program with pass_selection_to_program. By default, the system's #:: open program is used, but you can specify your own, the selection #:: will be passed as a command line argument to the program. For #:: example:: #:: map kitty_mod+o pass_selection_to_program firefox #:: You can pass the current selection to a terminal program running #:: in a new kitty window, by using the @selection placeholder:: #:: map kitty_mod+y new_window less @selection #: }}} #: Scrolling {{{ #: Scroll line up # map kitty_mod+up scroll_line_up # map kitty_mod+k scroll_line_up # map opt+cmd+page_up scroll_line_up # map cmd+up scroll_line_up #: Scroll line down # map kitty_mod+down scroll_line_down # map kitty_mod+j scroll_line_down # map opt+cmd+page_down scroll_line_down # map cmd+down scroll_line_down #: Scroll page up # map kitty_mod+page_up scroll_page_up # map cmd+page_up scroll_page_up #: Scroll page down # map kitty_mod+page_down scroll_page_down # map cmd+page_down scroll_page_down #: Scroll to top # map kitty_mod+home scroll_home # map cmd+home scroll_home #: Scroll to bottom # map kitty_mod+end scroll_end # map cmd+end scroll_end #: Scroll to previous shell prompt # map kitty_mod+z scroll_to_prompt -1 #:: Use a parameter of 0 for scroll_to_prompt to scroll to the last #:: jumped to or the last clicked position. Requires shell #:: integration #:: to work. #: Scroll to next shell prompt # map kitty_mod+x scroll_to_prompt 1 #: Browse scrollback buffer in pager # map kitty_mod+h show_scrollback #:: You can pipe the contents of the current screen and history #:: buffer as STDIN to an arbitrary program using launch --stdin- #:: source. For example, the following opens the scrollback buffer in #:: less in an overlay window:: #:: map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R #:: For more details on piping screen and buffer contents to external #:: programs, see launch . #: Browse output of the last shell command in pager # map kitty_mod+g show_last_command_output #:: You can also define additional shortcuts to get the command #:: output. For example, to get the first command output on screen:: #:: map f1 show_first_command_output_on_screen #:: To get the command output that was last accessed by a keyboard #:: action or mouse action:: #:: map f1 show_last_visited_command_output #:: You can pipe the output of the last command run in the shell #:: using the launch action. For example, the following opens the #:: output in less in an overlay window:: #:: map f1 launch --stdin-source=@last_cmd_output --stdin-add-formatting --type=overlay less +G -R #:: To get the output of the first command on the screen, use #:: @first_cmd_output_on_screen. To get the output of the last jumped #:: to command, use @last_visited_cmd_output. #:: Requires shell integration #:: to work. #: }}} #: Window management {{{ #: New window # map kitty_mod+enter new_window # map cmd+enter new_window #:: You can open a new kitty window running an arbitrary program, for #:: example:: #:: map kitty_mod+y launch mutt #:: You can open a new window with the current working directory set #:: to the working directory of the current window using:: #:: map ctrl+alt+enter launch --cwd=current #:: You can open a new window that is allowed to control kitty via #:: the kitty remote control facility with launch --allow-remote- #:: control. Any programs running in that window will be allowed to #:: control kitty. For example:: #:: map ctrl+enter launch --allow-remote-control some_program #:: You can open a new window next to the currently active window or #:: as the first window, with:: #:: map ctrl+n launch --location=neighbor #:: map ctrl+f launch --location=first #:: For more details, see launch #:: . #: New OS window # map kitty_mod+n new_os_window # map cmd+n new_os_window #:: Works like new_window above, except that it opens a top-level OS #:: window. In particular you can use new_os_window_with_cwd to open #:: a window with the current working directory. #: Close window # map kitty_mod+w close_window # map shift+cmd+d close_window #: Next window # map kitty_mod+] next_window #: Previous window # map kitty_mod+[ previous_window #: Move window forward # map kitty_mod+f move_window_forward #: Move window backward # map kitty_mod+b move_window_backward #: Move window to top # map kitty_mod+` move_window_to_top #: Start resizing window # map kitty_mod+r start_resizing_window # map cmd+r start_resizing_window #: First window # map kitty_mod+1 first_window # map cmd+1 first_window #: Second window # map kitty_mod+2 second_window # map cmd+2 second_window #: Third window # map kitty_mod+3 third_window # map cmd+3 third_window #: Fourth window # map kitty_mod+4 fourth_window # map cmd+4 fourth_window #: Fifth window # map kitty_mod+5 fifth_window # map cmd+5 fifth_window #: Sixth window # map kitty_mod+6 sixth_window # map cmd+6 sixth_window #: Seventh window # map kitty_mod+7 seventh_window # map cmd+7 seventh_window #: Eight window # map kitty_mod+8 eighth_window # map cmd+8 eighth_window #: Ninth window # map kitty_mod+9 ninth_window # map cmd+9 ninth_window #: Tenth window # map kitty_mod+0 tenth_window #: Visually select and focus window # map kitty_mod+f7 focus_visible_window #:: Display overlay numbers and alphabets on the window, and switch #:: the focus to the window when you press the key. When there are #:: only two windows, the focus will be switched directly without #:: displaying the overlay. You can change the overlay characters and #:: their order with option visual_window_select_characters. #: Visually swap window with another # map kitty_mod+f8 swap_with_window #:: Works like focus_visible_window above, but swaps the window. #: }}} #: Tab management {{{ #: Next tab # map kitty_mod+right next_tab # map shift+cmd+] next_tab # map ctrl+tab next_tab #: Previous tab # map kitty_mod+left previous_tab # map shift+cmd+[ previous_tab # map ctrl+shift+tab previous_tab #: New tab # map kitty_mod+t new_tab # map cmd+t new_tab #: Close tab # map kitty_mod+q close_tab # map cmd+w close_tab #: Close OS window # map shift+cmd+w close_os_window #: Move tab forward # map kitty_mod+. move_tab_forward #: Move tab backward # map kitty_mod+, move_tab_backward #: Set tab title # map kitty_mod+alt+t set_tab_title # map shift+cmd+i set_tab_title #: You can also create shortcuts to go to specific tabs, with 1 being #: the first tab, 2 the second tab and -1 being the previously active #: tab, and any number larger than the last tab being the last tab:: #: map ctrl+alt+1 goto_tab 1 #: map ctrl+alt+2 goto_tab 2 #: Just as with new_window above, you can also pass the name of #: arbitrary commands to run when using new_tab and new_tab_with_cwd. #: Finally, if you want the new tab to open next to the current tab #: rather than at the end of the tabs list, use:: #: map ctrl+t new_tab !neighbor [optional cmd to run] #: }}} #: Layout management {{{ #: Next layout # map kitty_mod+l next_layout #: You can also create shortcuts to switch to specific layouts:: #: map ctrl+alt+t goto_layout tall #: map ctrl+alt+s goto_layout stack #: Similarly, to switch back to the previous layout:: #: map ctrl+alt+p last_used_layout #: There is also a toggle_layout action that switches to the named #: layout or back to the previous layout if in the named layout. #: Useful to temporarily "zoom" the active window by switching to the #: stack layout:: #: map ctrl+alt+z toggle_layout stack #: }}} #: Font sizes {{{ #: You can change the font size for all top-level kitty OS windows at #: a time or only the current one. #: Increase font size # map kitty_mod+equal change_font_size all +2.0 # map kitty_mod+plus change_font_size all +2.0 # map kitty_mod+kp_add change_font_size all +2.0 # map cmd+plus change_font_size all +2.0 # map cmd+equal change_font_size all +2.0 # map shift+cmd+equal change_font_size all +2.0 #: Decrease font size # map kitty_mod+minus change_font_size all -2.0 # map kitty_mod+kp_subtract change_font_size all -2.0 # map cmd+minus change_font_size all -2.0 # map shift+cmd+minus change_font_size all -2.0 #: Reset font size # map kitty_mod+backspace change_font_size all 0 # map cmd+0 change_font_size all 0 #: To setup shortcuts for specific font sizes:: #: map kitty_mod+f6 change_font_size all 10.0 #: To setup shortcuts to change only the current OS window's font #: size:: #: map kitty_mod+f6 change_font_size current 10.0 #: }}} #: Select and act on visible text {{{ #: Use the hints kitten to select text and either pass it to an #: external program or insert it into the terminal or copy it to the #: clipboard. #: Open URL # map kitty_mod+e open_url_with_hints #:: Open a currently visible URL using the keyboard. The program used #:: to open the URL is specified in open_url_with. #: Insert selected path # map kitty_mod+p>f kitten hints --type path --program - #:: Select a path/filename and insert it into the terminal. Useful, #:: for instance to run git commands on a filename output from a #:: previous git command. #: Open selected path # map kitty_mod+p>shift+f kitten hints --type path #:: Select a path/filename and open it with the default open program. #: Insert selected line # map kitty_mod+p>l kitten hints --type line --program - #:: Select a line of text and insert it into the terminal. Useful for #:: the output of things like: `ls -1`. #: Insert selected word # map kitty_mod+p>w kitten hints --type word --program - #:: Select words and insert into terminal. #: Insert selected hash # map kitty_mod+p>h kitten hints --type hash --program - #:: Select something that looks like a hash and insert it into the #:: terminal. Useful with git, which uses SHA1 hashes to identify #:: commits. #: Open the selected file at the selected line # map kitty_mod+p>n kitten hints --type linenum #:: Select something that looks like filename:linenum and open it in #:: vim at the specified line number. #: Open the selected hyperlink # map kitty_mod+p>y kitten hints --type hyperlink #:: Select a hyperlink (i.e. a URL that has been marked as such by #:: the terminal program, for example, by `ls --hyperlink=auto`). #: The hints kitten has many more modes of operation that you can map #: to different shortcuts. For a full description see hints kitten #: . #: }}} #: Miscellaneous {{{ #: Show documentation # map kitty_mod+f1 show_kitty_doc overview #: Toggle fullscreen # map kitty_mod+f11 toggle_fullscreen # map ctrl+cmd+f toggle_fullscreen #: Toggle maximized # map kitty_mod+f10 toggle_maximized #: Toggle macOS secure keyboard entry # map opt+cmd+s toggle_macos_secure_keyboard_entry #: Unicode input # map kitty_mod+u kitten unicode_input # map ctrl+cmd+space kitten unicode_input #: Edit config file # map kitty_mod+f2 edit_config_file # map cmd+, edit_config_file #: Open the kitty command shell # map kitty_mod+escape kitty_shell window #:: Open the kitty shell in a new window / tab / overlay / os_window #:: to control kitty using commands. #: Increase background opacity # map kitty_mod+a>m set_background_opacity +0.1 #: Decrease background opacity # map kitty_mod+a>l set_background_opacity -0.1 #: Make background fully opaque # map kitty_mod+a>1 set_background_opacity 1 #: Reset background opacity # map kitty_mod+a>d set_background_opacity default #: Reset the terminal # map kitty_mod+delete clear_terminal reset active # map opt+cmd+r clear_terminal reset active #:: You can create shortcuts to clear/reset the terminal. For #:: example:: #:: # Reset the terminal #:: map f1 clear_terminal reset active #:: # Clear the terminal screen by erasing all contents #:: map f1 clear_terminal clear active #:: # Clear the terminal scrollback by erasing it #:: map f1 clear_terminal scrollback active #:: # Scroll the contents of the screen into the scrollback #:: map f1 clear_terminal scroll active #:: # Clear everything up to the line with the cursor #:: map f1 clear_terminal to_cursor active #:: If you want to operate on all kitty windows instead of just the #:: current one, use all instead of active. #:: It is also possible to remap Ctrl+L to both scroll the current #:: screen contents into the scrollback buffer and clear the screen, #:: instead of just clearing the screen, for example, for ZSH add the #:: following to ~/.zshrc: #:: .. code-block:: zsh #:: scroll-and-clear-screen() { #:: printf '\n%.0s' {1..$LINES} #:: zle clear-screen #:: } #:: zle -N scroll-and-clear-screen #:: bindkey '^l' scroll-and-clear-screen #: Clear up to cursor line # map cmd+k clear_terminal to_cursor active #: Reload kitty.conf # map kitty_mod+f5 load_config_file # map ctrl+cmd+, load_config_file #:: Reload kitty.conf, applying any changes since the last time it #:: was loaded. Note that a handful of options cannot be dynamically #:: changed and require a full restart of kitty. Particularly, when #:: changing shortcuts for actions located on the macOS global menu #:: bar, a full restart is needed. You can also map a keybinding to #:: load a different config file, for example:: #:: map f5 load_config /path/to/alternative/kitty.conf #:: Note that all options from the original kitty.conf are discarded, #:: in other words the new configuration *replace* the old ones. #: Debug kitty configuration # map kitty_mod+f6 debug_config # map opt+cmd+, debug_config #:: Show details about exactly what configuration kitty is running #:: with and its host environment. Useful for debugging issues. #: Send arbitrary text on key presses #:: E.g. map ctrl+shift+alt+h send_text all Hello World #:: You can tell kitty to send arbitrary (UTF-8) encoded text to the #:: client program when pressing specified shortcut keys. For #:: example:: #:: map ctrl+alt+a send_text all Special text #:: This will send "Special text" when you press the Ctrl+Alt+A key #:: combination. The text to be sent is a python string literal so #:: you can use escapes like \x1b to send control codes or \u21fb to #:: send Unicode characters (or you can just input the Unicode #:: characters directly as UTF-8 text). You can use `kitty +kitten #:: show_key` to get the key escape codes you want to emulate. #:: The first argument to send_text is the keyboard modes in which to #:: activate the shortcut. The possible values are normal, #:: application, kitty or a comma separated combination of them. The #:: modes normal and application refer to the DECCKM cursor key mode #:: for terminals, and kitty refers to the kitty extended keyboard #:: protocol. The special value all means all of them. #:: Some more examples:: #:: # Output a word and move the cursor to the start of the line (like typing and pressing Home) #:: map ctrl+alt+a send_text normal Word\x1b[H #:: map ctrl+alt+a send_text application Word\x1bOH #:: # Run a command at a shell prompt (like typing the command and pressing Enter) #:: map ctrl+alt+a send_text normal,application some command with arguments\r #: Open kitty Website # map shift+cmd+/ open_url https://sw.kovidgoyal.net/kitty/ #: }}} #: }}} ================================================ FILE: nvim/init.vim ================================================ set notermguicolors t_Co=16 set number set autoindent set selection=inclusive if (has("termguicolors")) set termguicolors endif call plug#begin('~/.vim/plugged') Plug 'neoclide/coc.nvim', {'branch': 'release'} Plug 'nvim-tree/nvim-web-devicons' " optional, for file icons Plug 'nvim-tree/nvim-tree.lua' Plug 'nvim-tree/nvim-web-devicons' Plug 'romgrk/barbar.nvim' Plug 'psliwka/termcolors.nvim' Plug 'neovim/nvim-lspconfig' Plug 'hrsh7th/cmp-nvim-lsp' Plug 'hrsh7th/cmp-buffer' Plug 'hrsh7th/cmp-path' Plug 'hrsh7th/cmp-cmdline' Plug 'hrsh7th/nvim-cmp' " For vsnip users. Plug 'hrsh7th/cmp-vsnip' Plug 'hrsh7th/vim-vsnip' Plug 'catppuccin/nvim', { 'as': 'catppuccin' } Plug 'tmsvg/pear-tree' Plug 'mfussenegger/nvim-dap' Plug 'mfussenegger/nvim-dap' Plug 'rcarriga/nvim-dap-ui' Plug 'mfussenegger/nvim-dap' Plug 'nvim-treesitter/nvim-treesitter', {'do': ':TSUpdate'} Plug 'theHamsta/nvim-dap-virtual-text' Plug 'nvim-lua/plenary.nvim' Plug 'nvim-treesitter/nvim-treesitter' Plug 'antoinemadec/FixCursorHold.nvim' Plug 'nvim-neotest/neotest' Plug 'liuchengxu/vim-clap' " Build the extra binary if cargo exists on your system. Plug 'liuchengxu/vim-clap', { 'do': ':Clap install-binary' } " The bang version will try to download the prebuilt binary if cargo does not exist. Plug 'liuchengxu/vim-clap', { 'do': ':Clap install-binary!' } " :Clap install-binary[!] will always try to compile the binary locally, " if you do care about the disk used for the compilation, try using the force download way, " which will download the prebuilt binary even you have installed cargo. Plug 'liuchengxu/vim-clap', { 'do': { -> clap#installer#force_download() } } " `:Clap install-binary[!]` will run using the terminal feature which is inherently async. " If you don't want that and hope to run the hook synchorously: Plug 'liuchengxu/vim-clap', { 'do': has('win32') ? 'cargo build --release' : 'make' } Plug 'nvim-lualine/lualine.nvim' " If you want to have icons in your statusline choose one of these Plug 'kyazdani42/nvim-web-devicons' Plug 'norcalli/nvim-colorizer.lua' Plug 'elkowar/yuck.vim' call plug#end() set completeopt=menu,menuone,noselect let bufferline = get(g:, 'bufferline', {}) let bufferline.icon_separator_active = '▎' let bufferline.icon_separator_inactive = '▎' lua << EOF -- examples for your init.lua -- disable netrw at the very start of your init.lua (strongly advised) vim.g.loaded_netrw = 1 vim.g.loaded_netrwPlugin = 1 -- set termguicolors to enable highlight groups vim.opt.termguicolors = true -- empty setup using defaults require("nvim-tree").setup() EOF lua << EOF -- Set up nvim-cmp. local cmp = require'cmp' cmp.setup({ snippet = { -- REQUIRED - you must specify a snippet engine expand = function(args) vim.fn["vsnip#anonymous"](args.body) -- For `vsnip` users. -- require('luasnip').lsp_expand(args.body) -- For `luasnip` users. -- require('snippy').expand_snippet(args.body) -- For `snippy` users. -- vim.fn["UltiSnips#Anon"](args.body) -- For `ultisnips` users. end, }, window = { -- completion = cmp.config.window.bordered(), -- documentation = cmp.config.window.bordered(), }, mapping = cmp.mapping.preset.insert({ [''] = cmp.mapping.scroll_docs(-4), [''] = cmp.mapping.scroll_docs(4), [''] = cmp.mapping.complete(), [''] = cmp.mapping.abort(), [''] = cmp.mapping.confirm({ select = true }), -- Accept currently selected item. Set `select` to `false` to only confirm explicitly selected items. }), sources = cmp.config.sources({ { name = 'nvim_lsp' }, { name = 'vsnip' }, -- For vsnip users. -- { name = 'luasnip' }, -- For luasnip users. -- { name = 'ultisnips' }, -- For ultisnips users. -- { name = 'snippy' }, -- For snippy users. }, { { name = 'buffer' }, }) }) -- Set configuration for specific filetype. cmp.setup.filetype('gitcommit', { sources = cmp.config.sources({ { name = 'cmp_git' }, -- You can specify the `cmp_git` source if you were installed it. }, { { name = 'buffer' }, }) }) -- Use buffer source for `/` and `?` (if you enabled `native_menu`, this won't work anymore). cmp.setup.cmdline({ '/', '?' }, { mapping = cmp.mapping.preset.cmdline(), sources = { { name = 'buffer' } } }) -- Use cmdline & path source for ':' (if you enabled `native_menu`, this won't work anymore). cmp.setup.cmdline(':', { mapping = cmp.mapping.preset.cmdline(), sources = cmp.config.sources({ { name = 'path' } }, { { name = 'cmdline' } }) }) -- Set up lspconfig. local capabilities = require('cmp_nvim_lsp').default_capabilities() -- Replace with each lsp server you've enabled. require('lspconfig')['clangd'].setup { capabilities = capabilities } EOF lua << EOF local dap = require('dap') dap.adapters.cppdbg = { id = 'cppdbg', type = 'executable', command = 'debug-adapters/extension/debugAdapters/bin/OpenDebugAD7', } EOF lua << EOF local dap = require('dap') dap.configurations.c = { { name = "Launch file", type = "cppdbg", request = "launch", program = function() return vim.fn.input('Path to executable: ', vim.fn.getcwd() .. '/', 'file') end, cwd = '${workspaceFolder}', stopAtEntry = true, }, { name = 'Attach to gdbserver :1234', type = 'cppdbg', request = 'launch', MIMode = 'gdb', miDebuggerServerAddress = 'localhost:1234', miDebuggerPath = '/usr/bin/gdb', cwd = '${workspaceFolder}', program = function() return vim.fn.input('Path to executable: ', vim.fn.getcwd() .. '/', 'file') end, }, } EOF lua << EOF require("catppuccin").setup({ flavour = "mocha", -- latte, frappe, macchiato, mocha background = { -- :h background light = "latte", dark = "mocha", }, transparent_background = false, show_end_of_buffer = false, -- show the '~' characters after the end of buffers term_colors = false, dim_inactive = { enabled = false, shade = "dark", percentage = 0.15, }, no_italic = false, -- Force no italic no_bold = false, -- Force no bold styles = { comments = { "italic" }, conditionals = { "italic" }, loops = {}, functions = {}, keywords = {}, strings = {}, variables = {}, numbers = {}, booleans = {}, properties = {}, types = {}, operators = {}, }, color_overrides = {}, custom_highlights = {}, integrations = { cmp = true, gitsigns = true, nvimtree = true, telescope = true, notify = false, mini = false, -- For more plugins integrations please scroll down (https://github.com/catppuccin/nvim#integrations) }, }) EOF lua << EOF require('lualine').setup { options = { component_separators = '|', section_separators = { left = '', right = '' }, theme = "catppuccin" }, sections = { lualine_a = { { 'mode', separator = { left = '' }, right_padding = 2 }, }, lualine_b = { 'filename', 'branch' }, lualine_c = { 'fileformat' }, lualine_x = {}, lualine_y = { 'filetype', 'progress' }, lualine_z = { { 'location', separator = { right = '' }, left_padding = 2 }, }, }, inactive_sections = { lualine_a = { 'filename' }, lualine_b = {}, lualine_c = {}, lualine_x = {}, lualine_y = {}, lualine_z = { 'location' }, }, tabline = {}, extensions = {}, } EOF colorscheme catppuccin-mocha ================================================ FILE: nvim/keymappings.lua ================================================ map({ "n", "", ":lua require('dapui').toggle()" }) map({ "n", "", ":lua require('dap').toggle_breakpoint()" }) map({ "n", "", ":lua require('dap').continue()" }) map({ "n", "", ":lua require('dap').step_over()" }) map({ "n", "", ":lua require('dap').step_into()" }) map({ "n", "", ":lua require('dap').step_out()" }) map({ "n", "dsc", ":lua require('dap').continue()" }) map({ "n", "dsv", ":lua require('dap').step_over()" }) map({ "n", "dsi", ":lua require('dap').step_into()" }) map({ "n", "dso", ":lua require('dap').step_out()" }) map({ "n", "dhh", ":lua require('dap.ui.variables').hover()" }) map({ "v", "dhv", ":lua require('dap.ui.variables').visual_hover()" }) map({ "n", "duh", ":lua require('dap.ui.widgets').hover()" }) map({ "n", "duf", ":lua local widgets=require('dap.ui.widgets');widgets.centered_float(widgets.scopes)" }) map({ "n", "dro", ":lua require('dap').repl.open()" }) map({ "n", "drl", ":lua require('dap').repl.run_last()" }) map({ "n", "dbc", ":lua require('dap').set_breakpoint(vim.fn.input('Breakpoint condition: '))" }) map({ "n", "dbm", ":lua require('dap').set_breakpoint({ nil, nil, vim.fn.input('Log point message: ') })" }) map({ "n", "dbt", ":lua require('dap').toggle_breakpoint()" }) map({ "n", "dc", ":lua require('dap.ui.variables').scopes()" }) map({ "n", "di", ":lua require('dapui').toggle()" }) ================================================ FILE: ranger/commands.py ================================================ # This is a sample commands.py. You can add your own commands here. # # Please refer to commands_full.py for all the default commands and a complete # documentation. Do NOT add them all here, or you may end up with defunct # commands when upgrading ranger. # A simple command for demonstration purposes follows. # ----------------------------------------------------------------------------- from __future__ import (absolute_import, division, print_function) # You can import any python module as needed. import os # You always need to import ranger.api.commands here to get the Command class: from ranger.api.commands import Command # Any class that is a subclass of "Command" will be integrated into ranger as a # command. Try typing ":my_edit" in ranger! class my_edit(Command): # The so-called doc-string of the class will be visible in the built-in # help that is accessible by typing "?c" inside ranger. """:my_edit A sample command for demonstration purposes that opens a file in an editor. """ # The execute method is called when you run this command in ranger. def execute(self): # self.arg(1) is the first (space-separated) argument to the function. # This way you can write ":my_edit somefilename". if self.arg(1): # self.rest(1) contains self.arg(1) and everything that follows target_filename = self.rest(1) else: # self.fm is a ranger.core.filemanager.FileManager object and gives # you access to internals of ranger. # self.fm.thisfile is a ranger.container.file.File object and is a # reference to the currently selected file. target_filename = self.fm.thisfile.path # This is a generic function to print text in ranger. self.fm.notify("Let's edit the file " + target_filename + "!") # Using bad=True in fm.notify allows you to print error messages: if not os.path.exists(target_filename): self.fm.notify("The given file does not exist!", bad=True) return # This executes a function from ranger.core.acitons, a module with a # variety of subroutines that can help you construct commands. # Check out the source, or run "pydoc ranger.core.actions" for a list. self.fm.edit_file(target_filename) # The tab method is called when you press tab, and should return a list of # suggestions that the user will tab through. # tabnum is 1 for and -1 for by default def tab(self, tabnum): # This is a generic tab-completion function that iterates through the # content of the current directory. return self._tab_directory_content() ================================================ FILE: ranger/commands_full.py ================================================ # -*- coding: utf-8 -*- # This file is part of ranger, the console file manager. # This configuration file is licensed under the same terms as ranger. # =================================================================== # # NOTE: If you copied this file to /etc/ranger/commands_full.py or # ~/.config/ranger/commands_full.py, then it will NOT be loaded by ranger, # and only serve as a reference. # # =================================================================== # This file contains ranger's commands. # It's all in python; lines beginning with # are comments. # # Note that additional commands are automatically generated from the methods # of the class ranger.core.actions.Actions. # # You can customize commands in the files /etc/ranger/commands.py (system-wide) # and ~/.config/ranger/commands.py (per user). # They have the same syntax as this file. In fact, you can just copy this # file to ~/.config/ranger/commands_full.py with # `ranger --copy-config=commands_full' and make your modifications, don't # forget to rename it to commands.py. You can also use # `ranger --copy-config=commands' to copy a short sample commands.py that # has everything you need to get started. # But make sure you update your configs when you update ranger. # # =================================================================== # Every class defined here which is a subclass of `Command' will be used as a # command in ranger. Several methods are defined to interface with ranger: # execute(): called when the command is executed. # cancel(): called when closing the console. # tab(tabnum): called when is pressed. # quick(): called after each keypress. # # tab() argument tabnum is 1 for and -1 for by default # # The return values for tab() can be either: # None: There is no tab completion # A string: Change the console to this string # A list/tuple/generator: cycle through every item in it # # The return value for quick() can be: # False: Nothing happens # True: Execute the command afterwards # # The return value for execute() and cancel() doesn't matter. # # =================================================================== # Commands have certain attributes and methods that facilitate parsing of # the arguments: # # self.line: The whole line that was written in the console. # self.args: A list of all (space-separated) arguments to the command. # self.quantifier: If this command was mapped to the key "X" and # the user pressed 6X, self.quantifier will be 6. # self.arg(n): The n-th argument, or an empty string if it doesn't exist. # self.rest(n): The n-th argument plus everything that followed. For example, # if the command was "search foo bar a b c", rest(2) will be "bar a b c" # self.start(n): Anything before the n-th argument. For example, if the # command was "search foo bar a b c", start(2) will be "search foo" # # =================================================================== # And this is a little reference for common ranger functions and objects: # # self.fm: A reference to the "fm" object which contains most information # about ranger. # self.fm.notify(string): Print the given string on the screen. # self.fm.notify(string, bad=True): Print the given string in RED. # self.fm.reload_cwd(): Reload the current working directory. # self.fm.thisdir: The current working directory. (A File object.) # self.fm.thisfile: The current file. (A File object too.) # self.fm.thistab.get_selection(): A list of all selected files. # self.fm.execute_console(string): Execute the string as a ranger command. # self.fm.open_console(string): Open the console with the given string # already typed in for you. # self.fm.move(direction): Moves the cursor in the given direction, which # can be something like down=3, up=5, right=1, left=1, to=6, ... # # File objects (for example self.fm.thisfile) have these useful attributes and # methods: # # tfile.path: The path to the file. # tfile.basename: The base name only. # tfile.load_content(): Force a loading of the directories content (which # obviously works with directories only) # tfile.is_directory: True/False depending on whether it's a directory. # # For advanced commands it is unavoidable to dive a bit into the source code # of ranger. # =================================================================== from __future__ import (absolute_import, division, print_function) from collections import deque import os import re from ranger.api.commands import Command class alias(Command): """:alias Copies the oldcommand as newcommand. """ context = 'browser' resolve_macros = False def execute(self): if not self.arg(1) or not self.arg(2): self.fm.notify('Syntax: alias ', bad=True) return self.fm.commands.alias(self.arg(1), self.rest(2)) class echo(Command): """:echo Display the text in the statusbar. """ def execute(self): self.fm.notify(self.rest(1)) class cd(Command): """:cd [-r] The cd command changes the directory. If the path is a file, selects that file. The command 'cd -' is equivalent to typing ``. Using the option "-r" will get you to the real path. """ def execute(self): if self.arg(1) == '-r': self.shift() destination = os.path.realpath(self.rest(1)) if os.path.isfile(destination): self.fm.select_file(destination) return else: destination = self.rest(1) if not destination: destination = '~' if destination == '-': self.fm.enter_bookmark('`') else: self.fm.cd(destination) def _tab_args(self): # dest must be rest because path could contain spaces if self.arg(1) == '-r': start = self.start(2) dest = self.rest(2) else: start = self.start(1) dest = self.rest(1) if dest: head, tail = os.path.split(os.path.expanduser(dest)) if head: dest_exp = os.path.join(os.path.normpath(head), tail) else: dest_exp = tail else: dest_exp = '' return (start, dest_exp, os.path.join(self.fm.thisdir.path, dest_exp), dest.endswith(os.path.sep)) @staticmethod def _tab_paths(dest, dest_abs, ends_with_sep): if not dest: try: return next(os.walk(dest_abs))[1], dest_abs except (OSError, StopIteration): return [], '' if ends_with_sep: try: return [os.path.join(dest, path) for path in next(os.walk(dest_abs))[1]], '' except (OSError, StopIteration): return [], '' return None, None def _tab_match(self, path_user, path_file): if self.fm.settings.cd_tab_case == 'insensitive': path_user = path_user.lower() path_file = path_file.lower() elif self.fm.settings.cd_tab_case == 'smart' and path_user.islower(): path_file = path_file.lower() return path_file.startswith(path_user) def _tab_normal(self, dest, dest_abs): dest_dir = os.path.dirname(dest) dest_base = os.path.basename(dest) try: dirnames = next(os.walk(os.path.dirname(dest_abs)))[1] except (OSError, StopIteration): return [], '' return [os.path.join(dest_dir, d) for d in dirnames if self._tab_match(dest_base, d)], '' def _tab_fuzzy_match(self, basepath, tokens): """ Find directories matching tokens recursively """ if not tokens: tokens = [''] paths = [basepath] while True: token = tokens.pop() matches = [] for path in paths: try: directories = next(os.walk(path))[1] except (OSError, StopIteration): continue matches += [os.path.join(path, d) for d in directories if self._tab_match(token, d)] if not tokens or not matches: return matches paths = matches return None def _tab_fuzzy(self, dest, dest_abs): tokens = [] basepath = dest_abs while True: basepath_old = basepath basepath, token = os.path.split(basepath) if basepath == basepath_old: break if os.path.isdir(basepath_old) and not token.startswith('.'): basepath = basepath_old break tokens.append(token) paths = self._tab_fuzzy_match(basepath, tokens) if not os.path.isabs(dest): paths_rel = self.fm.thisdir.path paths = [os.path.relpath(os.path.join(basepath, path), paths_rel) for path in paths] else: paths_rel = '' return paths, paths_rel def tab(self, tabnum): from os.path import sep start, dest, dest_abs, ends_with_sep = self._tab_args() paths, paths_rel = self._tab_paths(dest, dest_abs, ends_with_sep) if paths is None: if self.fm.settings.cd_tab_fuzzy: paths, paths_rel = self._tab_fuzzy(dest, dest_abs) else: paths, paths_rel = self._tab_normal(dest, dest_abs) paths.sort() if self.fm.settings.cd_bookmarks: paths[0:0] = [ os.path.relpath(v.path, paths_rel) if paths_rel else v.path for v in self.fm.bookmarks.dct.values() for path in paths if v.path.startswith(os.path.join(paths_rel, path) + sep) ] if not paths: return None if len(paths) == 1: return start + paths[0] + sep return [start + dirname + sep for dirname in paths] class chain(Command): """:chain ; ; ... Calls multiple commands at once, separated by semicolons. """ resolve_macros = False def execute(self): if not self.rest(1).strip(): self.fm.notify('Syntax: chain ; ; ...', bad=True) return for command in [s.strip() for s in self.rest(1).split(";")]: self.fm.execute_console(command) class shell(Command): escape_macros_for_shell = True def execute(self): if self.arg(1) and self.arg(1)[0] == '-': flags = self.arg(1)[1:] command = self.rest(2) else: flags = '' command = self.rest(1) if command: self.fm.execute_command(command, flags=flags) def tab(self, tabnum): from ranger.ext.get_executables import get_executables if self.arg(1) and self.arg(1)[0] == '-': command = self.rest(2) else: command = self.rest(1) start = self.line[0:len(self.line) - len(command)] try: position_of_last_space = command.rindex(" ") except ValueError: return (start + program + ' ' for program in get_executables() if program.startswith(command)) if position_of_last_space == len(command) - 1: selection = self.fm.thistab.get_selection() if len(selection) == 1: return self.line + selection[0].shell_escaped_basename + ' ' return self.line + '%s ' before_word, start_of_word = self.line.rsplit(' ', 1) return (before_word + ' ' + file.shell_escaped_basename for file in self.fm.thisdir.files or [] if file.shell_escaped_basename.startswith(start_of_word)) class open_with(Command): def execute(self): app, flags, mode = self._get_app_flags_mode(self.rest(1)) self.fm.execute_file( files=[f for f in self.fm.thistab.get_selection()], app=app, flags=flags, mode=mode) def tab(self, tabnum): return self._tab_through_executables() def _get_app_flags_mode(self, string): # pylint: disable=too-many-branches,too-many-statements """Extracts the application, flags and mode from a string. examples: "mplayer f 1" => ("mplayer", "f", 1) "atool 4" => ("atool", "", 4) "p" => ("", "p", 0) "" => None """ app = '' flags = '' mode = 0 split = string.split() if len(split) == 1: part = split[0] if self._is_app(part): app = part elif self._is_flags(part): flags = part elif self._is_mode(part): mode = part elif len(split) == 2: part0 = split[0] part1 = split[1] if self._is_app(part0): app = part0 if self._is_flags(part1): flags = part1 elif self._is_mode(part1): mode = part1 elif self._is_flags(part0): flags = part0 if self._is_mode(part1): mode = part1 elif self._is_mode(part0): mode = part0 if self._is_flags(part1): flags = part1 elif len(split) >= 3: part0 = split[0] part1 = split[1] part2 = split[2] if self._is_app(part0): app = part0 if self._is_flags(part1): flags = part1 if self._is_mode(part2): mode = part2 elif self._is_mode(part1): mode = part1 if self._is_flags(part2): flags = part2 elif self._is_flags(part0): flags = part0 if self._is_mode(part1): mode = part1 elif self._is_mode(part0): mode = part0 if self._is_flags(part1): flags = part1 return app, flags, int(mode) def _is_app(self, arg): return not self._is_flags(arg) and not arg.isdigit() @staticmethod def _is_flags(arg): from ranger.core.runner import ALLOWED_FLAGS return all(x in ALLOWED_FLAGS for x in arg) @staticmethod def _is_mode(arg): return all(x in '0123456789' for x in arg) class set_(Command): """:set