Repository: bigtreetech/BIQU-B1 Branch: master Commit: 12ad1158b8a3 Files: 134 Total size: 9.5 MB Directory structure: gitextract_6bv4_tqd/ ├── B1-IDEX firmware/ │ └── RRF/ │ ├── filaments/ │ │ └── nop.g │ ├── gcodes/ │ │ └── nop.g │ ├── macros/ │ │ ├── copy.g │ │ ├── dualx.g │ │ ├── mirror.g │ │ └── wg.g │ └── sys/ │ ├── bed.g │ ├── board.txt │ ├── config.g │ ├── config.json │ ├── deployprobe.g │ ├── dwc-settings.json │ ├── homeall.g │ ├── homeu.g │ ├── homex.g │ ├── homey.g │ ├── homez.g │ ├── pause.g │ ├── probe.g │ ├── resume.g │ ├── retractprobe.g │ ├── sleep.g │ ├── stop.g │ ├── tfree0.g │ ├── tfree1.g │ ├── tpost0.g │ ├── tpost1.g │ ├── tpre0.g │ └── tpre1.g ├── Firmware/ │ ├── 2021-04-28/ │ │ └── Screen-210609/ │ │ ├── Language Packs/ │ │ │ ├── language_am.ini │ │ │ ├── language_ca.ini │ │ │ ├── language_cn.ini │ │ │ ├── language_cz.ini │ │ │ ├── language_de.ini │ │ │ ├── language_du.ini │ │ │ ├── language_en.ini │ │ │ ├── language_es.ini │ │ │ ├── language_fr.ini │ │ │ ├── language_gr.ini │ │ │ ├── language_hu.ini │ │ │ ├── language_it.ini │ │ │ ├── language_jp.ini │ │ │ ├── language_pl.ini │ │ │ ├── language_pt.ini │ │ │ ├── language_ru.ini │ │ │ ├── language_sk.ini │ │ │ ├── language_sl.ini │ │ │ ├── language_tc.ini │ │ │ ├── language_tr.ini │ │ │ └── language_uk.ini │ │ ├── TFT35/ │ │ │ ├── bmp/ │ │ │ │ └── readme.md │ │ │ └── font/ │ │ │ ├── 8x16_byte_ascii.fon │ │ │ ├── byte_ascii.fon │ │ │ ├── large_byte_ascii.fon │ │ │ ├── readme.md │ │ │ └── word_unicode.fon │ │ ├── config.ini │ │ └── language_cn.ini │ ├── 2022-03-27/ │ │ ├── Motherboard-2022-03-27/ │ │ │ ├── Motherboard-SKR 2-F407/ │ │ │ │ └── admin.txt │ │ │ ├── Motherboard-SKR 2-F429/ │ │ │ │ └── admin.txt │ │ │ └── Motherboard-SKR V1.4/ │ │ │ └── admin.txt │ │ └── Screen-2022-03-27/ │ │ ├── BTT B1 TFT35 V3.0 - STM32/ │ │ │ ├── Language Packs/ │ │ │ │ ├── language_am.ini │ │ │ │ ├── language_br.ini │ │ │ │ ├── language_ca.ini │ │ │ │ ├── language_cn.ini │ │ │ │ ├── language_cz.ini │ │ │ │ ├── language_de.ini │ │ │ │ ├── language_en.ini │ │ │ │ ├── language_es.ini │ │ │ │ ├── language_fr.ini │ │ │ │ ├── language_gr.ini │ │ │ │ ├── language_hu.ini │ │ │ │ ├── language_it.ini │ │ │ │ ├── language_jp.ini │ │ │ │ ├── language_nl.ini │ │ │ │ ├── language_pl.ini │ │ │ │ ├── language_pt.ini │ │ │ │ ├── language_ru.ini │ │ │ │ ├── language_sk.ini │ │ │ │ ├── language_sl.ini │ │ │ │ ├── language_tc.ini │ │ │ │ ├── language_tr.ini │ │ │ │ └── language_uk.ini │ │ │ ├── TFT35/ │ │ │ │ ├── bmp/ │ │ │ │ │ └── readme.md │ │ │ │ └── font/ │ │ │ │ ├── 8x16_byte_ascii.fon │ │ │ │ ├── byte_ascii.fon │ │ │ │ ├── large_byte_ascii.fon │ │ │ │ ├── readme.md │ │ │ │ └── word_unicode.fon │ │ │ ├── admin.txt │ │ │ ├── config.ini │ │ │ └── language_cn.ini │ │ └── BTT B1 TFT35 V3.0.1 - GD32/ │ │ ├── Language Packs/ │ │ │ ├── language_am.ini │ │ │ ├── language_br.ini │ │ │ ├── language_ca.ini │ │ │ ├── language_cn.ini │ │ │ ├── language_cz.ini │ │ │ ├── language_de.ini │ │ │ ├── language_en.ini │ │ │ ├── language_es.ini │ │ │ ├── language_fr.ini │ │ │ ├── language_gr.ini │ │ │ ├── language_hu.ini │ │ │ ├── language_it.ini │ │ │ ├── language_jp.ini │ │ │ ├── language_nl.ini │ │ │ ├── language_pl.ini │ │ │ ├── language_pt.ini │ │ │ ├── language_ru.ini │ │ │ ├── language_sk.ini │ │ │ ├── language_sl.ini │ │ │ ├── language_tc.ini │ │ │ ├── language_tr.ini │ │ │ └── language_uk.ini │ │ ├── TFT35/ │ │ │ ├── bmp/ │ │ │ │ └── readme.md │ │ │ └── font/ │ │ │ ├── 8x16_byte_ascii.fon │ │ │ ├── byte_ascii.fon │ │ │ ├── large_byte_ascii.fon │ │ │ ├── readme.md │ │ │ └── word_unicode.fon │ │ ├── admin.txt │ │ ├── config.ini │ │ └── language_cn.ini │ ├── README.md │ └── lpc176x_usb_driver.inf ├── Printed parts/ │ ├── Adapter plate cover-200331.STL │ ├── Air guide-0519.STL │ ├── Chassis TYPE-C interface protection cover.STL │ ├── Consumable frame nut.STL │ └── Nozzle TYPE-C protective cover.STL ├── README.md └── TF card data/ └── English/ ├── Setting files/ │ └── biqu-b1 configuration file.curaprofile └── models/ ├── CFFFP_Little Bear.gcode └── CFFFP_Pokémon.gcode ================================================ FILE CONTENTS ================================================ ================================================ FILE: B1-IDEX firmware/RRF/filaments/nop.g ================================================ ; ================================================ FILE: B1-IDEX firmware/RRF/gcodes/nop.g ================================================ ; ================================================ FILE: B1-IDEX firmware/RRF/macros/copy.g ================================================ M505 P"copy" M98 P"config.g" ================================================ FILE: B1-IDEX firmware/RRF/macros/dualx.g ================================================ M505 M98 P"config.g" ================================================ FILE: B1-IDEX firmware/RRF/macros/mirror.g ================================================ M505 P"mirror" M98 P"config.g" ================================================ FILE: B1-IDEX firmware/RRF/macros/wg.g ================================================ M557 X-50：110 Y10：210 S40 ================================================ FILE: B1-IDEX firmware/RRF/sys/bed.g ================================================ ; bed.g ; called to perform automatic bed compensation via G32 ; ; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) T0 G1 X80Y80 G30 T1 G30 S-2 G1 Z30 T0 G29 ================================================ FILE: B1-IDEX firmware/RRF/sys/board.txt ================================================ // Board Hardware configuration file for BTT SKR-2 // generated by RepRapFirmware Configuration Tool (LPC Version) v3.1.10+4-LPC // on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) //Note: Each line should be less than 120 characters. // : Unwanted options can be commented out or set to NoPin. Lines commented out will get default values // : for pins the default is NoPin. // : Values for Arrays need to be contained within { and } // : Comments can be defined with // or # (comments are not supported inside arrays) // : Each config entry must be all on a single line. lpc.board = biquskr_2; //LED blinks to indicate Platform is spinning or other diagnostic //Comment out or set to NoPin if not wanted. leds.diagnostic = NoPin; //Internal SDCard SPI Frequency. lpc.internalSDCard.spiFrequencyHz = 25000000; //Only supports 1 External SDCard //externalSDCard.csPin = NoPin; //externalSDCard.cardDetectPin = NoPin; //lpc.externalSDCard.spiFrequencyHz = 4000000; //lpc.externalSDCard.spiChannel = 0; heat.tempSensePins = {bedtemp, e0temp}; //Max of 3 entries //heat.spiTempSensorCSPins = { }; //Max of 2 entries //Analogue to Digital prefilter adc.prefilter.enable = true //ESP Settings 8266wifi.espDataReadyPin = B.10; 8266wifi.lpcTfrReadyPin = B.11; 8266wifi.espResetPin = C.14; //ESP RX/TX Settings 8266wifi.serialRxTxPins = { PD_9, PD_8 } ; stepper.enablePins = { PE_3, PD_6, PD_1, PC_7, PD_13, PC_4} ; stepper.stepPins = {PE_2, PD_5, PA_15, PD_15, PD_11, PA_7} ; stepper.directionPins = {PE_1, PD_4, PA_8, PD_14, PD_10, PB_2} ; stepper.TmcUartPins = {PE_0, PD_3, PD_0, PC_6, PD_12, PE_11} ; //TMC Smart Drivers stepper.numSmartDrivers = 6; // External Display settings serial.aux.rxTxPins = {PA_10, PA_9}; atx.powerPin = E.8; atx.powerPinInverted = false led.neopixelPin = E.6; leds.diagnostic = A.13; ================================================ FILE: B1-IDEX firmware/RRF/sys/config.g ================================================ ; Configuration file for BTT E3 RRF v1.0 (firmware version 3) ; executed by the firmware on start-up ; ; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) ; General preferences G90 ; send absolute coordinates... M83 ; ...but relative extruder moves M550 P"BTT-E3-RRF" ; set printer name ; Network M552 S0 M586 P0 S1 ; enable HTTP M586 P1 S0 ; disable FTP M586 P2 S0 ; disable Telnet ; Drives M569 P0 S0 ; physical drive 0 goes forwards using default driver timings M569 P1 S1 ; physical drive 1 goes forwards using default driver timings M569 P2 S1 ; physical drive 2 goes forwards using default driver timings M569 P3 S0 ; physical drive 3 goes forwards using default driver timings M569 P4 S1 ; physical drive 4 goes forwards using default driver timings M569 P5 S0 ; physical drive 5 goes forwards using default driver timings M584 X0 Y1 Z2 U5 E3:4 ; set drive mapping M350 X16 Y16 U16 Z16 E16 I1 ; configure microstepping with interpolation M92 X80.00 Y80.00 U64.00 Z400.00 E93.00:93.00 ; set steps per mm M566 X900.00 Y900.00 U900.00 Z60.00 E120.00 ; set maximum instantaneous speed changes (mm/min) M203 X12000.00 Y12000.00 U12000.00 Z600.00 E1200.00 ; set maximum speeds (mm/min) M201 X500.00 Y500.00 U500.00 Z20.00 E250.00 ; set accelerations (mm/s^2) M906 X800 Y800 U800 Z800 E1200 I30 ; set motor currents (mA) and motor idle factor in per cent M84 S30 ; Set idle timeout ; Axis Limits M208 X-60 Y0 U0 Z-2 S1 ; set axis minima M208 X90 Y235 U155 Z235 S0 ; set axis maxima ; Endstops M574 X1 S1 P"!xstop" ; configure active-high endstop for low end on X via pin xstop M574 U2 S1 P"PC15" ; configure active-high endstop for low end on X via pin xstop M574 Y1 S1 P"!ystop" ; configure active-high endstop for low end on Y via pin ystop M574 Z1 S2 P"^probe" ;M591 D0 P7 C"e0stop" S1 R50:130 L7.0 E10 ;M591 D1 P7 C"e1stop" S1 R50:130 L7.0 E10 ; Z-Probe ;M950 S0 C"servo0" ; create servo pin 0 for BLTouch M558 P5 C"!^probe" H5 F120 T3000 ; set Z probe type to bltouch and the dive height + speeds G31 Z0P500 ; set Z probe trigger value, offset and trigger height M557 X0:160 Y10:230 S40 ; define mesh grid M376 H10 ; Heaters M308 S0 P"bedtemp" Y"thermistor" T100000 B3950 ; configure sensor 0 as thermistor on pin bedtemp M950 H0 C"bed" T0 ; create bed heater output on bed and map it to sensor 0 ;M301 P21.73 I1.54 D76.55 ; disable bang-bang mode for the bed heater and set PWM limit M307 H0 D120 B1 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit M140 H0 ; map heated bed to heater 0 M143 H0 S150 ; set temperature limit for heater 0 to 150C M308 S1 P"e0temp" Y"thermistor" T100000 B3950 ; configure sensor 1 as thermistor on pin e0temp M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1 M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit M143 H1 S300 ; set temperature limit for heater 1 to 300C ; T1 M308 S2 P"e1temp" Y"thermistor" T100000 B3950 ; configure sensor 1 as thermistor on pin e0temp M950 H2 C"e1heat" T2 ; create nozzle heater output on e0heat and map it to sensor 1 M307 H2 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit M143 H2 S300 ; set temperature limit for heater 1 to 300C ; Fans M950 F0 C"fan0" Q1000 ; create fan 0 on pin fan0 and set its frequency M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off ; EXP-Fans M950 F1 C"fan2" Q1000 ; create fan 2 on pin fan0 and set its frequency M106 P1 S255 H2 T45 M106 P1 S0 H-1 ; set fan 0 value. Thermostatic control is turned off M563 P0 D0 H1 F0:1 ; define tool 0 G10 P0 X0 Y0 Z0 S0 R0 ; set tool 0 axis offsets M563 P1 D1 H2 X3 F0:1 ; define tool 0 G10 P1 Y0 U0 Z0 S0 R0 M563 P2 D0:1 H1:2 X0:3 F0:1 S"COPY" G10 P2 X55 Y0 U-55 S0 R0 M567 P2 E1:1 M563 P3 D0:1 H1:2 X0:3 F0:1 S"MIRROR" G10 P3 X-116.2 Y0 U0 S0 R0 M567 P3 E1:1 ; Custom settings are not defined M552 S1 ; Miscellaneous ;M575 P1 S1 B57600 ; enable support for PanelDue M575 P1 S2 B57600 M501 M150 X2 T0 P0 M375 ================================================ FILE: B1-IDEX firmware/RRF/sys/config.json ================================================ {"board":"btt_rrf_e3_1.0","expansion_boards":[],"firmware":3,"standalone":true,"nvram":false,"auto_save":{"enabled":false,"save_threshold":10,"resume_threshold":11,"gcodes_to_run":"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000"},"display":{"type":0,"encoder_steps":4,"spi_frequency":2000000,"menus":[{"name":"main","value":""}],"images":[]},"externalSDCard":{"present":false,"spi_frequency":4000000},"geometry":{"type":"cartesian","mins":[0,0,0],"maxes":[235,235,250],"delta_radius":105.6,"homed_height":250,"low_dive_height":false,"max_carriage_travel":260,"print_radius":85,"rod_length":215,"z_min":0},"drives":[{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":80,"instant_dv":15,"max_speed":200,"acceleration":500,"current":580,"driver":0,"driver_v3":"0.0","endstop_pin":"xstop","endstop_type":1,"endstop_location":1,"stepperDriver":"TMC2209","stepperDriverTimings":""},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":80,"instant_dv":15,"max_speed":200,"acceleration":500,"current":580,"driver":1,"driver_v3":"0.1","endstop_pin":"ystop","endstop_type":1,"endstop_location":1,"stepperDriver":"TMC2209","stepperDriverTimings":""},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":400,"instant_dv":1,"max_speed":20,"acceleration":20,"current":580,"driver":2,"driver_v3":"0.2","endstop_pin":"zstop","endstop":null,"endstop_type":1,"endstop_location":1,"stepperDriver":"TMC2209","stepperDriverTimings":""},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":93,"instant_dv":2,"max_speed":20,"acceleration":250,"current":650,"driver":3,"driver_v3":"0.3","stepperDriver":"TMC2209","stepperDriverTimings":""}],"idle":{"used":true,"factor":30,"timeout":30},"homing_speed_fast":30,"homing_speed_slow":6,"travel_speed":100,"z_dive_height":5,"slow_homing":false,"probe":{"type":"bltouch","recovery_time":0.4,"trigger_height":-1.85,"trigger_value":500,"x_offset":-40,"y_offset":-10,"speed":2,"deploy":true,"points":[],"pwm_channel":3,"pwm_inverted":true,"pwm_pin":"servo0","input_pin":"probe"},"bed_is_nozzle":false,"bed":{"present":true,"heater":0,"use_pid":false},"chamber":{"present":false,"use_pid":false,"heater":2},"heaters":[{"temp_limit":150,"scale_factor":100,"series":4700,"thermistor":100000,"beta":3950,"a":0.0005717725,"b":0.0002416626,"c":0,"channel":0,"sensor":0,"output_pin":"bed","sensor_type":"thermistor","sensor_pin":"bedtemp"},{"temp_limit":300,"scale_factor":100,"series":4700,"thermistor":100000,"beta":3950,"a":0.0005717725,"b":0.0002416626,"c":0,"channel":1,"sensor":1,"output_pin":"e0heat","sensor_type":"thermistor","sensor_pin":"e0temp"}],"num_nozzles":1,"toolchange_wait_for_temperatures":true,"generate_t_code":false,"tools":[{"mix_ratio":[],"number":0,"name":"","extruders":[0],"heaters":[1],"fans":[0],"x_offset":0,"y_offset":0,"z_offset":0}],"compensation_x_offset":15,"compensation_y_offset":15,"peripheral_points":3,"halfway_points":3,"calibration_factors":6,"probe_radius":85,"mesh":{"x_min":15,"x_max":215,"y_min":15,"y_max":215,"radius":85,"spacing":20},"home_first":false,"orthogonal":{"compensation":false,"height":50,"deviations":[0,0,0]},"network":{"enabled":true,"mac_address":"","name":"BTT-SKR-RRF-E3","password":"biqu2021","ssid":"biqu-m","ssid_password":"biqu2020","dhcp":true,"ip":"192.168.1.20","netmask":"255.255.255.0","gateway":"192.168.1.1","protocols":{"http":true,"ftp":false,"telnet":false},"espDataReadyPin":"0.28","lpcTfrReadyPin":"1.30","espResetPin":"1.31","espRXTX":true,"serialRxPin":"0.3","serialTxPin":"0.2","serialRxPinalt":"4.29","serialTxPinalt":"4.28"},"fans":[{"name":"","value":0,"inverted":false,"frequency":1000,"thermostatic":false,"heaters":[],"trigger_temperature":45,"output_pin":"fan0"},{"name":"","value":0,"inverted":false,"frequency":1000,"thermostatic":false,"heaters":[],"trigger_temperature":45,"output_pin":"fan1"}],"custom_settings":"","panelDue":true} ================================================ FILE: B1-IDEX firmware/RRF/sys/deployprobe.g ================================================ ;if state.currentTool==0 ;M106P3S255; ;if state.currentTool==1 ;M106P2S255; ================================================ FILE: B1-IDEX firmware/RRF/sys/dwc-settings.json ================================================ {"main":{"language":"en","lastHostname":"192.168.1.103","darkTheme":false,"useBinaryPrefix":true,"disableAutoComplete":false,"settingsStorageLocal":false,"settingsSaveDelay":2000,"cacheStorageLocal":true,"cacheSaveDelay":4000,"notifications":{"errorsPersistent":true,"timeout":5000},"webcam":{"url":"","updateInterval":5000,"liveUrl":"","useFix":false,"embedded":false,"rotation":0,"flip":"none"},"enabledPlugins":["Height Map"],"plugins":{}},"machine":{"ajaxRetries":2,"updateInterval":250,"extendedUpdateEvery":20,"fileTransferRetryThreshold":358400,"crcUploads":true,"pingInterval":2000,"updateDelay":0,"babystepAmount":0.05,"codes":["G28","M0","M1","M114","M119","M122","M18","M82","M83","M84","T0","T1","m122","m92"],"displayedExtraTemperatures":[],"displayedExtruders":[0,1],"displayedFans":[-1,0,1,2],"moveSteps":{"X":[100,50,10,1,0.1],"Y":[100,50,10,1,0.1],"Z":[50,25,5,0.5,0.05],"default":[100,50,10,1,0.1]},"moveFeedrate":6000,"extruderAmounts":[100,50,20,10,5,1],"extruderFeedrates":[60,30,15,5,1],"temperatures":{"tool":{"active":[250,235,220,205,195,160,120,100,0],"standby":[210,180,160,140,0]},"bed":{"active":[110,100,90,70,65,60,0],"standby":[40,30,0]},"chamber":[90,80,70,60,50,40,0]},"spindleRPM":[10000,75000,5000,2500,1000,0],"enabledPlugins":[],"plugins":{}}} ================================================ FILE: B1-IDEX firmware/RRF/sys/homeall.g ================================================ ; homeall.g ; called to home all axes ; ; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) T0 P0 G91 ; relative positioning G1 H2 Z5 F6000 ; lift Z relative to current position G1 H1 X-240 Y-240 U240 F1800 ; move quickly to X and Y axis endstops and stop there (first pass) G1 H2 X5 Y5 U-5 F6000 ; go back a few mm G1 H1 X-240 Y-240 U240 F360 ; move slowly to X and Y axis endstops once more (second pass) G1X30Y30 G30 G1 Z5 ================================================ FILE: B1-IDEX firmware/RRF/sys/homeu.g ================================================ ; homex.g ; called to home the X axis ; ; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) G91 ; relative positioning G1 H2 Z5 F6000 ; lift Z relative to current position G1 H1 U240 F1800 ; move quickly to X axis endstop and stop there (first pass) G1 H2 U-5 F6000 ; go back a few mm G1 H1 U10 F360 ; move slowly to X axis endstop once more (second pass) G1 H2 Z-5 F6000 ; lower Z again G90 ; absolute positioning ================================================ FILE: B1-IDEX firmware/RRF/sys/homex.g ================================================ ; homex.g ; called to home the X axis ; ; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) G91 ; relative positioning G1 H2 Z5 F6000 ; lift Z relative to current position G1 H1 X-240 F1800 ; move quickly to X axis endstop and stop there (first pass) G1 H2 X5 F6000 ; go back a few mm G1 H1 X-240 F360 ; move slowly to X axis endstop once more (second pass) G1 H2 Z-5 F6000 ; lower Z again G90 ; absolute positioning ================================================ FILE: B1-IDEX firmware/RRF/sys/homey.g ================================================ ; homey.g ; called to home the Y axis ; ; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) G91 ; relative positioning G1 H2 Z5 F6000 ; lift Z relative to current position G1 H1 Y-240 F1800 ; move quickly to Y axis endstop and stop there (first pass) G1 H2 Y5 F6000 ; go back a few mm G1 H1 Y-240 F360 ; move slowly to Y axis endstop once more (second pass) G1 H2 Z-5 F6000 ; lower Z again G90 ; absolute positioning ================================================ FILE: B1-IDEX firmware/RRF/sys/homez.g ================================================ ; homez.g ; called to home the Z axis ; ; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) T0 P0 G91 ; relative positioning G1 H2 Z5 F6000 ; lift Z relative to current position G30 G1 Z5 F100 ; lift Z relative to current position ================================================ FILE: B1-IDEX firmware/RRF/sys/pause.g ================================================ ; pause.g ; called when a print from SD card is paused ; ; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) M83 ; relative extruder moves G1 E-10 F3600 ; retract 10mm of filament G91 ; relative positioning G1 Z5 F360 ; lift Z by 5mm G90 ; absolute positioning G1 X0 Y0 F6000 ; go to X=0 Y=0 ================================================ FILE: B1-IDEX firmware/RRF/sys/probe.g ================================================ ================================================ FILE: B1-IDEX firmware/RRF/sys/resume.g ================================================ ; resume.g ; called before a print from SD card is resumed ; ; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) G1 R1 X0 Y0 Z5 F6000 ; go to 5mm above position of the last print move G1 R1 X0 Y0 ; go back to the last print move M83 ; relative extruder moves G1 E10 F3600 ; extrude 10mm of filament ================================================ FILE: B1-IDEX firmware/RRF/sys/retractprobe.g ================================================ ;if state.currentTool==0 ;M106P3S0; ;if state.currentTool==1 ;M106P2S0; ================================================ FILE: B1-IDEX firmware/RRF/sys/sleep.g ================================================ ; sleep.g ; called when M1 (Sleep) is being processed ; ; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) ================================================ FILE: B1-IDEX firmware/RRF/sys/stop.g ================================================ ; stop.g ; called when M0 (Stop) is run (e.g. when a print from SD card is cancelled) ; ; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间) ================================================ FILE: B1-IDEX firmware/RRF/sys/tfree0.g ================================================ ; tfree0.g ; called when tool 0 is freed ; ; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep 11 2020 20:17:50 GMT+0800 (中國標準時間) G60 S0 G91 G1 Z3 F6000 M83 G1 E-2 F6000 G1 E-6 F3000 G1 H1 X-250 F7000 ================================================ FILE: B1-IDEX firmware/RRF/sys/tfree1.g ================================================ ; tfree1.g ; called when tool 1 is freed ; ; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep 11 2020 20:17:50 GMT+0800 (中國標準時間) G60 S0 G91 G1 Z3 F6000 M83 G1 E-2 F6000 G1 E-6 F3000 G1 H1 U250 F7000 ================================================ FILE: B1-IDEX firmware/RRF/sys/tpost0.g ================================================ ; tpost0.g ; called after tool 0 has been selected ; ; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep 11 2020 20:17:50 GMT+0800 (中國標準時間) ; Wait for set temperatures to be reached M116 P0 M83 G1 E-3 G1 R0 X0 F4000 G1 R0 Z0 G1 E3 ================================================ FILE: B1-IDEX firmware/RRF/sys/tpost1.g ================================================ ; tpost1.g ; called after tool 1 has been selected ; ; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep 11 2020 20:17:50 GMT+0800 (中國標準時間) ; Wait for set temperatures to be reached M116 P1 M83 G1 E-3 G1 R0 X0 F4000 G1 R0 Z0 G1 E3 ================================================ FILE: B1-IDEX firmware/RRF/sys/tpre0.g ================================================ ================================================ FILE: B1-IDEX firmware/RRF/sys/tpre1.g ================================================ ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_am.ini ================================================ #### Language Code:AM ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:BaudRate label_language:Հայերեն label_rotate_ui:Rotate UI label_terminal_ack:Show ACK in Terminal label_persistent_info:Persistent Status Info label_file_list_mode:Files viewer List Mode label_file_sort_by:Sort files by label_ack_notification:ACK notification style label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:Marlin mode in fullscreen label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:Move speed(X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:Auto Power label_fil_runout:Filament sensor label_pl_recovery_en:Power loss recovery label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:Touch sounds label_toast_sound:Toast Notifications label_alert_sound:Popups and Alerts label_heater_sound:Heater notification label_knob_led_color:Rotary Knob LED label_knob_led_idle:Rotary Knob LED idle label_lcd_brightness:Brightness label_lcd_idle_brightness:Idle brightness label_lcd_idle_delay:Idle timeout label_start_gcode_enabled:Start Gcode before print label_end_gcode_enabled:End Gcode after print label_cancel_gcode_enabled:Cancel Gcode label_steps_setting:Steps per mm label_maxfeedrate:Max Feed Rate label_maxacceleration:Max Acceleration label_acceleration:Acceleration label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2nd Nozzle label_probe_offset:Probe Offset label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:Driver Current (mA) label_bump_sensitivity:TMC bump sensitivity label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:Print Acceleration label_retract_acceleration:Retract Acceleration label_travel_acceleration:Travel Acceleration label_retract_length:Retract length label_retract_swap_length:Retract swap length label_retract_feedrate:Retract feedrate label_retract_z_lift:Z lift on retraction label_recover_length:Extra recover length label_swap_recover_length:Extra recover swap length label_recover_feedrate:Recover feedrate label_swap_recover_feedrate:Swap recover feedrate label_mbl_offset:MBL Offset label_save:Save label_restore:Restore label_reset:Reset label_eeprom_save_info:Save printer settings to EEPROM? label_eeprom_restore_info:Reload settings from EEPROM? label_eeprom_reset_info:Reset EEPROM to stock printer settings? label_settings_save:Save settings label_settings_restore:Restore settings label_settings_reset:Reset default settings label_settings_reset_info:Reset all settings to default values? label_settings_reset_done:Reset all settings successful.\nPlease restart the device. label_page_up:Վերեւ label_page_down:Ներքեւ label_up:Up label_down:Down label_next:Next label_back:Հետ label_inc:Ավելացնել label_dec:Նվազեցնել label_load:Load label_unload:Unload label_on:ON label_off:OFF label_auto:AUTO label_smart:SMART label_slow:Դանդաղ label_normal:Նորմալ label_fast:Արագ label_zero:Zero label_half:Կիսատ label_full:Ամբողջը label_custom:Custom label_clear:Clear label_default:Default label_start:Start label_stop:Դադարեցնել label_pause:Կանգնեցնել label_resume:Շարունակել label_init:Init label_disconnect:Անջատել label_shut_down:Shut Down label_force_shut_down:Force label_emergencystop:EM. STOP label_preheat:Preheat label_preheat_both:Both label_cooldown:Cool Down label_confirm:Confirm label_cancel:Չեղարկել label_warning:Warning label_continue:Շարունակել label_confirmation:Are you sure? label_status:Status label_ready:Պատրաստ label_busy:Ծանրաբեռնված է label_loading:Բեռնում է... label_unconnected:Տպիչը կցված չէ label_info:Info label_invalid_value:Invalid value(s) label_timeout_reached:Timeout reached! label_disconnect_info:Now you can control the printer by your computer! label_shutting_down:Shutting down... label_wait_temp_shut_down:Wait for the temperature of hotend to be lower than %d℃ label_power_failed:Տպելը չի ավարտվել, շարունակե՞լ label_process_running:Process already running! label_process_completed:Process completed! label_process_aborted:Process aborted! label_tftsd:TFT SD label_read_tftsd_error:TFTSD հիշողության սարքը չկա label_tftsd_inserted:Card inserted! label_tftsd_removed:Card removed! label_u_disk:U Disk label_read_u_disk_error:Read U Disk error! label_u_disk_inserted:U Disk inserted! label_u_disk_removed:U Disk removed! label_onboardsd:OnboardSD label_read_onboardsd_error:OnboardSD հիշողության սարքը չկա label_filament_runout:Filament runout! label_disable_steppers:Disarm All label_xy_unlock:Disarm XY label_start_print:Start Printing:\n%s? label_stop_print:Stop printing? label_is_pause:Unable to extrude when printing.\nPause printing? label_m0_pause:Paused by M0 command label_test:Test label_deploy:Deploy label_stow:Stow label_repeat:Repeat label_nozzle:Գլխիկ label_bed:Տախտակ label_chamber:Chamber label_fan:Հովացնել label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Sec. label_10_seconds:10 Sec. label_30_seconds:30 Sec. label_60_seconds:1 Min. label_120_seconds:2 Min. label_300_seconds:5 Min. label_white:White label_black:Black label_blue:Blue label_red:Red label_green:Green label_cyan:Cyan label_yellow:Yellow label_brown:Brown label_gray:Gray label_orange:Orange label_indigo:Indigo label_violet:Violet label_magenta:Magenta label_purple:Purple label_lime:Lime label_darkblue:DarkBlue label_darkgreen:DarkGreen label_darkgray:DarkGray label_heat:Ջերմություն label_move:Շարժել label_home:Սկզբնական label_print:Տպել label_extrude:Հալել label_settings:Կարգավորումներ label_screen_settings:Screen label_machine_settings:Machine label_marlin_mode_settings:MarlinMode label_feature_settings:Feature label_sound:Sound label_rgb_settings:LED Color label_rgb_off:LED Off label_terminal:Terminal label_leveling:Leveling label_point_1:Point 1 label_point_2:Point 2 label_point_3:Point 3 label_point_4:Point 4 label_point_5:Point 5 label_bed_leveling:Bed Level label_bl_complete:Bed Leveling Complete label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save! label_bl_enable:BL: on label_bl_disable:BL: off label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Save to slot label_abl_settings_ubl_load:Load from slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot? label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P Offset label_h_offset:H Offset label_distance:Distance label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:TSC Adjust label_more:More label_screen_info:Info label_bg_color:Background color label_font_color:Font color label_percentage:Percentage label_percentage_speed:Արագություն label_percentage_flow:Flow label_babystep:Դանդաղ label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Էկրանի կարգավորում label_adjust_info:Please click on the red dot label_adjust_ok:Adjustment Success label_adjust_failed:Adjustment failed, Please Try Again. label_unifiedmove:Movement label_unifiedheat:Heat&Fan label_touch_to_exit:Touch anywhere to exit label_mainmenu:Menu label_parameter_setting:Պարամետր label_eeprom_settings:EEPROM label_leveling_edge_distance:Bed edge distance label_tuning:Tuning label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune may take some time to complete.\nContinue? label_pid_start_info_2:PID autotune in progress! label_pid_start_info_3:Do not touch the screen until completed (green LED ON)! label_tune_extruder:Tune steps label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:Connection label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_ca.ini ================================================ #### Language Code:CA ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:Velocitat de transmissió label_language:Català label_rotate_ui:Rotar label_terminal_ack:Mostra ACK a la terminal label_persistent_info:Informació d'estat persistent label_file_list_mode:Mode de visualització de fitxers label_file_sort_by:Sort files by label_ack_notification:ACK notification style label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:Mode Marlin a pantalla completa label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:Velocitat de moviment(X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:Apag. aut. label_fil_runout:Sensor de filament label_pl_recovery_en:Recuperació de pèrdua d’energia label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:Touch sounds label_toast_sound:Toast Notifications label_alert_sound:Popups and Alerts label_heater_sound:Heater notification label_knob_led_color:Perilla rotativa LED label_knob_led_idle:Rotary Knob LED idle label_lcd_brightness:Lluminositat label_lcd_idle_brightness:Dim Lluminositat LCD label_lcd_idle_delay:Temporitzador inactiu LCD label_start_gcode_enabled:Enviar Gcode inicial label_end_gcode_enabled:Enviar Gcode final label_cancel_gcode_enabled:Cancel · lar Gcode label_steps_setting:Passos per MM label_maxfeedrate:Max Feed Rate label_maxacceleration:Max Acceleració label_acceleration:Acceleració label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:Retracció de FW label_fwrecover:Recuperació de Retracció de FW label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2nd Nozzle label_probe_offset:Sonda Compensar label_lin_advance:Avanç Lineal label_filament_setting:Filament Diameter label_current_setting:Corrent del Driver (mA) label_bump_sensitivity:Sensibilitat al topall TMC label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:Acceleració Impressió label_retract_acceleration:Acceleració Retracció label_travel_acceleration:Acceleració Viatge label_retract_length:Longitud Retracció label_retract_swap_length:Distància retracció intercanvi label_retract_feedrate:Velocitat Retracció label_retract_z_lift:Z aixecament a la retracció label_recover_length:Distancia recuperació extra label_swap_recover_length:Distancia recuperació intercanvi extra label_recover_feedrate:Velocitat recuperació label_swap_recover_feedrate:Velocitat recuperació intercanvi label_mbl_offset:MBL Offset label_save:Gravar label_restore:Restore label_reset:Reset label_eeprom_save_info:Desa la configuració de la impressora a la EEPROM? label_eeprom_restore_info:Carregar la configuració de EEPROM? label_eeprom_reset_info:Reset EEPROM to stock printer settings? label_settings_save:Save settings label_settings_restore:Restaura la configuració label_settings_reset:Restableix la configuració label_settings_reset_info:Restableix tota la configuració a valors predeterminats? label_settings_reset_done:Restableix tota la configuració aconseguit.\nreinicieu el dispositiu. label_page_up:Retrocedir label_page_down:Avançar label_up:Amunt label_down:Avall label_next:Next label_back:Tornar label_inc:Augmentar label_dec:Disminur label_load:Carregar label_unload:Descarregar label_on:ON label_off:OFF label_auto:AUTO label_smart:SMART label_slow:Lent label_normal:Normal label_fast:Ràpid label_zero:Zero label_half:Meitat label_full:Màxim label_custom:Personalitzar label_clear:Clear label_default:Default label_start:Començar label_stop:Parar label_pause:Pausar label_resume:Continuar label_init:Init label_disconnect:Desconnectar label_shut_down:Apagar label_force_shut_down:Forçar Apagat label_emergencystop:PARADA EMERGENCIA label_preheat:Preescalfar label_preheat_both:Tots dos label_cooldown:Refredar label_confirm:Confirmar label_cancel:Cancel · lar label_warning:Advertència label_continue:Continuar label_confirmation:Estàs segur? label_status:Estat label_ready:A punt!! label_busy:Processament ocupat, si us plau esperi ... label_loading:Carregant ... label_unconnected:No hi ha comunicació amb impressora! label_info:Informació label_invalid_value:Invalid value(s) label_timeout_reached:Timeout reached! label_disconnect_info:Ara pot controlar la impressora des del seu ordinador! label_shutting_down:Apagant... label_wait_temp_shut_down:Espereu que la temperatura del hotend sigui inferior a %d℃ label_power_failed:¿Continuar imprimint? label_process_running:Process already running! label_process_completed:Process completed! label_process_aborted:Process aborted! label_tftsd:SD TFT label_read_tftsd_error:Error a la targeta SD TFT! label_tftsd_inserted:¡Targeta inserida! label_tftsd_removed:¡Targeta extreta! label_u_disk:Pendrive label_read_u_disk_error:¡Error al Pendrive! label_u_disk_inserted:¡Pendrive inserit! label_u_disk_removed:¡Pendrive extret! label_onboardsd:SD Placa label_read_onboardsd_error:Error a la targeta SD de la placa! label_filament_runout:¡Filament esgotat! label_disable_steppers:Disarm All label_xy_unlock:Disarm XY label_start_print:Comenceu a imprimir:\n%s? label_stop_print:Voleu aturar la impressió? label_is_pause:No es pot extruir al imprimir,¿\nPausar la impressió? label_m0_pause:En pausa per l'ordre M0 label_test:Provar label_deploy:Desplegar label_stow:Plegar label_repeat:Repetir label_nozzle:Nozzle label_bed:Llit label_chamber:Cambra label_fan:Ventilar label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Sec. label_10_seconds:10 Sec. label_30_seconds:30 Sec. label_60_seconds:1 Min. label_120_seconds:2 Min. label_300_seconds:5 Min. label_white:Blanc label_black:Negre label_blue:Blau label_red:Vermell label_green:Verd label_cyan:Cian label_yellow:groc label_brown:marró label_gray:Gris label_orange:taronja label_indigo:Índigo label_violet:violeta label_magenta:Magenta label_purple:Porpra label_lime:Llima label_darkblue:Blau fosc label_darkgreen:Verd fosc label_darkgray:Gris fosc label_heat:Escalfar label_move:Moure label_home:Origen label_print:Imprimir label_extrude:Extruir label_settings:Configura label_screen_settings:Pantalla label_machine_settings:Màquina label_marlin_mode_settings:MarlinMode label_feature_settings:Afegits label_sound:Sound label_rgb_settings:Color LED label_rgb_off:Apagar LED label_terminal:Terminal label_leveling:Anivellar label_point_1:Punt 1 label_point_2:Punt 2 label_point_3:Punt 3 label_point_4:Punt 4 label_point_5:Punt 5 label_bed_leveling:Bed Level label_bl_complete:Nivellat del llit completat label_bl_smart_fill:Falten punts de prova s'han omplert de forma intel·ligent.\n\nNota: recordeu guardar! label_bl_enable:BL: on label_bl_disable:BL: off label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Nivellament del llit Bilinear label_abl_settings_ubl:Nivellament de llit unificat label_abl_settings_ubl_save:Desa a la ranura label_abl_settings_ubl_load:Carrega des de la ranura label_abl_slot0:Ranura 0 label_abl_slot1:Ranura 1 label_abl_slot2:Ranura 2 label_abl_slot3:Ranura 3 label_abl_slot_eeprom:Recordar la ranura per al proper reinici? (Guardar EEPROM) label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P Offset label_h_offset:H Offset label_distance:Distance label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:Calibrar label_more:Més label_screen_info:Informar label_bg_color:Color de fons label_font_color:Color de lletra label_percentage:Percentatge label_percentage_speed:Velocitat label_percentage_flow:Flux label_babystep:BabyStep label_x_inc:+X label_y_inc:+Y label_z_inc:+Z label_x_dec:-X label_y_dec:-Y label_z_dec:-Z label_x:X label_y:Y label_z:Z label_adjust_title:¡Calibrar la pantalla tàctil label_adjust_info:Si us plau feu clic al punt vermell label_adjust_ok:Ajust correcte label_adjust_failed:Ajust fallit, si us plau intenteu de nou label_unifiedmove:Moviment label_unifiedheat:Calor/Ventilador label_touch_to_exit:Toca qualsevol lloc per sortir label_mainmenu:Menú label_parameter_setting:Paràmetre label_eeprom_settings:EEPROM label_leveling_edge_distance:Bed edge distance label_tuning:Tuning label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune may take some time to complete.\nContinue? label_pid_start_info_2:PID autotune in progress! label_pid_start_info_3:Do not touch the screen until completed (green LED ON)! label_tune_extruder:Tune steps label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:Connection label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_cn.ini ================================================ #### Language Code:CN ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:波特率 label_language:简体中文 label_rotate_ui:旋转界面 label_terminal_ack:在G-code终端中显示温度信息 label_persistent_info:顶部温度信息 label_file_list_mode:文件浏览列表模式 label_file_sort_by:Sort files by label_ack_notification:ACK 弹窗类型 label_emulate_m600:模拟M600 label_serial_always_on:串口常开 label_marlin_fullscreen:全屏显示Marlin模式 label_marlin_show_title:Marlin模式显示标题 label_marlin_type:Marlin模式类型 label_move_speed:移动速度(X Y Z) label_auto_load_leveling:自动保存/加载调平数据 label_fan_speed_percent:百分比显示风扇速度 label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z轴多电机自动对齐 label_ps_on:自动关机 label_fil_runout:耗材检测传感器 label_pl_recovery_en:断电续打 label_pl_recovery_home:断电续打前归零 label_btt_mini_ups:启用BTT UPS label_touch_sound:按钮声音 label_toast_sound:Toast 提示声音 label_alert_sound:弹窗和提示声音 label_heater_sound:加热提示音 label_knob_led_color:旋钮LED颜色 label_knob_led_idle:旋钮LED自动睡眠 label_lcd_brightness:LCD背光亮度 label_lcd_idle_brightness:LCD睡眠背光亮度 label_lcd_idle_delay:LCD自动睡眠时间 label_start_gcode_enabled:执行打印前起始Gcode label_end_gcode_enabled:执行打印后结束Gcode label_cancel_gcode_enabled:中断打印Gcode label_steps_setting:电机每毫米脉冲数(Steps/mm) label_maxfeedrate:最大移动速度 label_maxacceleration:最大加速度 label_acceleration:加速度 label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:原点偏移量 label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:FW自动回抽 label_hotend_offset:第2个喷头的偏移量 label_probe_offset:探针偏移量 label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:TMC驱动电流设置 label_bump_sensitivity:TMC堵转检测灵敏度 label_hybrid_threshold:TMC混合阈值 label_stealth_chop:TMC StealthChop label_print_acceleration:打印加速度 label_retract_acceleration:回抽加速度 label_travel_acceleration:空载加速度 label_retract_length:FW回抽长度 label_retract_swap_length:换料时回抽的长度 label_retract_feedrate:FW回抽速度 label_retract_z_lift:回抽时Z轴抬升的高度 label_recover_length:额外挤出的长度 label_swap_recover_length:换料时额外挤出的长度 label_recover_feedrate:FW挤出速度 label_swap_recover_feedrate:换料时挤出的速度 label_mbl_offset:MBL Offset label_save:保存参数 label_restore:恢复 label_reset:重置 label_eeprom_save_info:是否保存打印机设置到EEPROM? label_eeprom_restore_info:是否从EEPROM加载设置? label_eeprom_reset_info:重置EEPROM到出厂设置? label_settings_save:保存设置 label_settings_restore:保存设置 label_settings_reset:重置设置 label_settings_reset_info:所有的设置会被重置为默认值, 是否继续? label_settings_reset_done:重置所有参数成功! 重启设备后生效. label_page_up:上一页 label_page_down:下一页 label_up:抬升 label_down:降低 label_next:下一个 label_back:返回 label_inc:增加 label_dec:减少 label_load:进料 label_unload:退料 label_on:开启 label_off:关闭 label_auto:AUTO label_smart:智能 label_slow:慢速 label_normal:常速 label_fast:快速 label_zero:清零 label_half:半速 label_full:全速 label_custom:自定义 label_clear:清除 label_default:默认 label_start:开始 label_stop:停止 label_pause:暂停 label_resume:继续 label_init:Init label_disconnect:断开连接 label_shut_down:关闭电源 label_force_shut_down:强制关机 label_emergencystop:紧急停止 label_preheat:一键预热 label_preheat_both:全部 label_cooldown:冷却 label_confirm:确定 label_cancel:取消 label_warning:警告 label_continue:继续 label_confirmation:请确认是否执行? label_status:状态 label_ready:准备打印 label_busy:系统繁忙,请稍候... label_loading:加载中... label_unconnected:未连接到打印机! label_info:提示 label_invalid_value:没有有效的条件! label_timeout_reached:已超时! label_disconnect_info:现在可以用电脑控制打印机 label_shutting_down:正在关机... label_wait_temp_shut_down:喷头温度正在降温，等待低于%d℃后自动关机 label_power_failed:是否继续打印? label_process_running:正在运行,请稍后 label_process_completed:处理已完成! label_process_aborted:处理已被中断! label_tftsd:TFT SD label_read_tftsd_error:读TFT SD卡出错! label_tftsd_inserted:SD卡已插入! label_tftsd_removed:SD卡已拔出! label_u_disk:U盘 label_read_u_disk_error:读U盘出错! label_u_disk_inserted:U盘已插入! label_u_disk_removed:U盘已拔出! label_onboardsd:板载SD label_read_onboardsd_error:读板载SD卡出错! label_filament_runout:耗材已用尽,请更换耗材! label_disable_steppers:解锁电机 label_xy_unlock:解锁XY label_start_print:是否开始打印:\n%s? label_stop_print:是否停止打印? label_is_pause:打印中无法挤出耗材, 是否暂停打印? label_m0_pause:M0暂停 label_test:BL自检 label_deploy:探针弹出 label_stow:探针收回 label_repeat:精度测试 label_nozzle:喷头 label_bed:热床 label_chamber:机箱 label_fan:风扇 label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5秒 label_10_seconds:10秒 label_30_seconds:30秒 label_60_seconds:1分钟 label_120_seconds:2分钟 label_300_seconds:5分钟 label_white:白色 label_black:黑色 label_blue:蓝色 label_red:红色 label_green:绿色 label_cyan:青色 label_yellow:黄色 label_brown:棕色 label_gray:灰色 label_orange:橙色 label_indigo:靛 label_violet:紫罗兰色 label_magenta:桃红色 label_purple:紫色 label_lime:青柠色 label_darkblue:暗蓝色 label_darkgreen:暗绿色 label_darkgray:暗灰色 label_heat:加热 label_move:移动 label_home:回原点 label_print:打印 label_extrude:挤出 label_settings:设置 label_screen_settings:屏幕设置 label_machine_settings:机器设置 label_marlin_mode_settings:MarlinMode label_feature_settings:功能设置 label_sound:声音 label_rgb_settings:灯光颜色 label_rgb_off:熄灭灯光 label_terminal:Terminal label_leveling:调平 label_point_1:第一点 label_point_2:第二点 label_point_3:第三点 label_point_4:第四点 label_point_5:第五点 label_bed_leveling:平台调平 label_bl_complete:平台调平完成! label_bl_smart_fill:部分点未探测,已被自动填充, 需要手动保存! label_bl_enable:BL:已开启 label_bl_disable:BL:已关闭 label_abl:自动调平 label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Save to slot label_abl_settings_ubl_load:Load from slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot? label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P Offset label_h_offset:H Offset label_distance:距离 label_load_unload:挤出/回抽耗材 label_load_unload_short:进/退料 label_touchscreen_adjust:触屏校准 label_more:更多 label_screen_info:关于 label_bg_color:背景颜色 label_font_color:字体颜色 label_percentage:百分比 label_percentage_speed:速度百分比 label_percentage_flow:流量百分比 label_babystep:Z-微调 label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:触屏校准 label_adjust_info:请点击红点中心位置 label_adjust_ok:校准成功 label_adjust_failed:校准失败,请重试 label_unifiedmove:运动 label_unifiedheat:温度 label_touch_to_exit:触摸任意点退出当前界面 label_mainmenu:菜单 label_parameter_setting:参数设置 label_eeprom_settings:EEPROM label_leveling_edge_distance:手动调平边沿距离 label_tuning:调整 label_pid:PID label_pid_title:PID自动整定 label_pid_start_info:开始PID自动整定,需要几分钟来完成,是否继续? label_pid_start_info_2:PID 正在自动整定中! label_pid_start_info_3:不要操作触控屏直到整定完成! label_tune_extruder:微调E-Steps label_tune_ext_extrude_100:挤出100mm label_tune_ext_temp:挤出机微调 | 加热 label_tune_ext_mark120mm:在耗材上标记120mm\n标记完成后点击 '%s'\n挤出完成后测量剩余长度 label_tune_ext_heatoff:关闭加热? label_tune_ext_adj_esteps:调整E-Steps label_tune_ext_esteps_saved:新的E-Steps已生效,需要手动保存到EEPROM\n新E-Steps: %0.2f label_tune_ext_measured:剩余的长度: label_tune_ext_old_estep:旧的E-Steps: %0.2f label_tune_ext_new_estep:新的E-Steps: %0.2f label_connection_settings:连接 label_notifications:通知 label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:机箱灯光 label_load_started:正在挤出耗材, 请等待挤出完成. label_unload_started:正在回抽耗材, 请等待回抽完成. label_heaters_on:喷头仍在加热, 是否要停止加热? label_print_finished: 打印 完成 label_main_screen:主界面 label_previous_print_data:打印统计 label_print_time:打印耗时: %02u:%02u:%02u label_filament_length:\n使用耗材长度: %1.2fm label_filament_weight:\n已使用耗材重量: %1.2fg label_filament_cost:\n已使用耗材成本: %1.2f label_no_filament_stats:\n无耗材历史数据 label_click_for_more:点击查看详情 label_ext_templow:喷头温度低于最小挤出问题 (%d℃). label_heat_hotend:加热喷头到%d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:调平测试 label_wait_for_temp:请等待温度升高到目标温度 label_stop_plane_test:是否停止调平测试? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_cz.ini ================================================ #### Language Code:CZ ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:Sériový Port label_language:Čeština label_rotate_ui:Otočit UI label_terminal_ack:zobrazit ACK Terminálu label_persistent_info:Zobrazení stavových ikon label_file_list_mode:Soubory jako seznam label_file_sort_by:Řazení souborů label_ack_notification:Styl oznámení ACK label_emulate_m600:Emulace M600 label_serial_always_on:Sériový port vždy ON label_marlin_fullscreen:Fullscreen režim Marlin label_marlin_show_title:Zobrazit tytulek Marlin label_marlin_type:Typ Marlin Modu label_move_speed:Rychlost pohybu X Y Z label_auto_load_leveling:Automaticky Leveling label_fan_speed_percent:Rychlost ventilátoru v % label_xy_offset_probing:Podpora XY Offset sondy label_z_steppers_alignment:Z Motor Auto-Alignment label_ps_on:Auto.vypnutí label_fil_runout:Senzor filamentu label_pl_recovery_en:Obnova po ztrátě napájení label_pl_recovery_home:Spuštění obnovení napájení label_btt_mini_ups:Podpora BTT UPS label_touch_sound:Zvuk při dotyku label_toast_sound:Zvuk oznámení label_alert_sound:Zvuk popup okna label_heater_sound:Zvuk při dosažení teploty label_knob_led_color:Rotační knob LED label_knob_led_idle:Rotační knob LED idle label_lcd_brightness:LCD Jas label_lcd_idle_brightness:LCD snížení jasu label_lcd_idle_delay:LCD snížení jasu po label_start_gcode_enabled:Spustit Gcode před tiskem label_end_gcode_enabled:Spustit Gcode po tisku label_cancel_gcode_enabled:Spustit Gcode po stornu label_steps_setting:Kroků/mm label_maxfeedrate:Max rychlost label_maxacceleration:Max zrychlení label_acceleration:Zrychlení label_jerk:Jerk-trhnutí label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Zatažení label_fwrecover:FW Obnovení label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2.trysky label_probe_offset:Offset sondy label_lin_advance:Linear Advance label_filament_setting:Průměr Filamentu label_current_setting:TMC Proud motorů(mA) label_bump_sensitivity:TMC Citlivost dorazu label_hybrid_threshold:TMC Hybridní práh label_stealth_chop:TMC Tichý režim label_print_acceleration:Zrychlení při tisku label_retract_acceleration:Zrychlení retrakcí label_travel_acceleration:Zrychlení při přesunu label_retract_length:Délka zatažení label_retract_swap_length:Délka zatažení Swap label_retract_feedrate:Rychlost zatažení label_retract_z_lift:Z zvýšení při zatažení label_recover_length:Délka obnovení label_swap_recover_length:Délka obnovení Swap label_recover_feedrate:Rychlost obnovení label_swap_recover_feedrate:Rychlost obnovení Swap label_mbl_offset:MBL Offset label_save:Uložit label_restore:Obnovit label_reset:Reset label_eeprom_save_info:Uložit nastavení tiskárny do EEPROM? label_eeprom_restore_info:Obnovit nastavení z EEPROM? label_eeprom_reset_info:Reset EEPROM na výchozí hodnoty? label_settings_save:Uložení nastavení label_settings_restore:Obnovení nastavení label_settings_reset:Reset nastavení label_settings_reset_info:Všechna nastavení budou obnovena na výchozí hodnoty. Pokračovat? label_settings_reset_done:Resetování všech nastavení bylo úspěšně provedeno.\nRestartujte zařízení. label_page_up:Další label_page_down:Předchozí label_up:Nahoru label_down:Dolů label_next:Další label_back:Zpět label_inc:Přidat label_dec:Ubrat label_load:Zavést label_unload:Vysunout label_on:ON label_off:OFF label_auto:AUTO label_smart:SMART label_slow:Pomalu label_normal:Normál label_fast:Rychle label_zero:Vynulovat label_half:Poloviční label_full:Plný label_custom:Vlastní label_clear:Vymaž label_default:Výchozí label_start:Start label_stop:Stop label_pause:Pauza label_resume:Obnovit label_init:Init label_disconnect:Odpojit label_shut_down:Vypnout label_force_shut_down:Vynutit label_emergencystop:!!STOP!! label_preheat:Zahřát label_preheat_both:Vše label_cooldown:Zchladit label_confirm:Potvrdit label_cancel:Zrušit label_warning:Varování label_continue:Pokračovat label_confirmation:Jste si jistý? label_status:Status label_ready:Připraven label_busy:Zpracovávám, čekejte prosím... label_loading:Nahrávám... label_unconnected:Tiskárna není připojena! label_info:Info label_invalid_value:Neplatná hodnota/y! label_timeout_reached:Časový limit vypršel! label_disconnect_info:Nyní můžete tiskárnu ovládat z počítače! label_shutting_down:Vypínám se... label_wait_temp_shut_down:Čekám na zchladnutí trysky pod %d℃ label_power_failed:Obnovit tisk? label_process_running:Probíhá proces! label_process_completed:Proces dokončen! label_process_aborted:Proces přerušen! label_tftsd:TFT SD label_read_tftsd_error:Chyba při čtení SD karty! label_tftsd_inserted:SD karta vložena! label_tftsd_removed:SD karta vyjmuta! label_u_disk:USB Disk label_read_u_disk_error:Chyba při čtení USB disku! label_u_disk_inserted:USB disk vložen! label_u_disk_removed:USB disk vyjmut! label_onboardsd:Onboard SD label_read_onboardsd_error:Chyba při čtení Onboard SD! label_filament_runout:Došel filament! label_disable_steppers:Motory label_xy_unlock:Uvolnit XY label_start_print:Spustit tisk:\n%s? label_stop_print:Zastavit tisk? label_is_pause:Během tisku nelze extrudovat,\nmám pozastavit tisk? label_m0_pause:Pauza po příkazu M0 label_test:Test label_deploy:Vysunout label_stow:Zasunout label_repeat:Přesnost label_nozzle:Tryska label_bed:Stolek label_chamber:Komora label_fan:Ofuk label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0,01mm label_01_mm:0,1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 sec. label_10_seconds:10 sec. label_30_seconds:30 sec. label_60_seconds:1 min. label_120_seconds:2 min. label_300_seconds:5 min. label_white:Bílá label_black:Černá label_blue:Modrá label_red:Červená label_green:Zelená label_cyan:Tyrkys label_yellow:Žlutá label_brown:Hnědá label_gray:Šedá label_orange:Oranžová label_indigo:Indigo label_violet:Fialová label_magenta:Purpurová label_purple:Nachová label_lime:Limetková label_darkblue:Tmavá Modrá label_darkgreen:Tmavá Červená label_darkgray:Tmavá Šedá label_heat:Teplota label_move:Posunout label_home:Domů label_print:Tisknout label_extrude:Filament label_settings:Nastavení label_screen_settings:Displej label_machine_settings:Tiskárna label_marlin_mode_settings:MarlinMode label_feature_settings:Vlastnosti label_sound:Zvuk label_rgb_settings:Barva LED label_rgb_off:LED vyp. label_terminal:Terminál label_leveling:Srovnat label_point_1:Bod 1 label_point_2:Bod 2 label_point_3:Bod 3 label_point_4:Bod 4 label_point_5:Bod 5 label_bed_leveling:Bed Level label_bl_complete:Vyrovnání kompletní label_bl_smart_fill:Chybějící body sondy byly vyplněny inteligentně.\n\nPozn: Nezapomeň uložit! label_bl_enable:BL: on label_bl_disable:BL: off label_abl:Vyrovnat label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Ruční vyrovnání label_abl_settings:Auto vyrovnání label_abl_settings_bbl:Bilineární vyrovnání label_abl_settings_ubl:UBL vyrovnání label_abl_settings_ubl_save:Uložit do slotu label_abl_settings_ubl_load:Nahrát ze slotu label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Zapamatuj si slot restart? (Uložit EEPROM) label_abl_z:Z-Slábnutí label_level_corner:L Rohů label_p_offset:P Offset label_h_offset:H Offset label_distance:Od okraje label_load_unload:Vysunout/Zavést label_load_unload_short:Vysunout label_touchscreen_adjust:Kalibrovat label_more:Více label_screen_info:Info label_bg_color:Barva pozadí label_font_color:Barva písma label_percentage:Procenta label_percentage_speed:Rychlost label_percentage_flow:Průtok label_babystep:BabyStep label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Kalibrace dotykové obrazovky label_adjust_info:Dotkněte se postupně všech bodů label_adjust_ok:Kalibrace úspěšná label_adjust_failed:Kalibrace selhala, zopakujte znovu label_unifiedmove:Pohyb label_unifiedheat:Teplota label_touch_to_exit:Pro návrat se dotkněte obrazovky... label_mainmenu:Menu label_parameter_setting:Parametry label_eeprom_settings:EEPROM label_leveling_edge_distance:Vzdálenost nivelačních bodů\nstolku od okraje label_tuning:Kalibrace label_pid:PID label_pid_title:PID autokalibrace label_pid_start_info:PID autokalibrace bude spuštěna. Bude to chvíli trvat.\nPokračovat? label_pid_start_info_2:PID autokalibrace probíhá! label_pid_start_info_3:NEDOTÝKEJ se displeje dokud není dokončeno (Zelená LED svítí)! label_tune_extruder:E-Krok label_tune_ext_extrude_100:100mm Vysunutí label_tune_ext_temp:Kalibrace extruderu, ohřev label_tune_ext_mark120mm:Označ 120mm na filamentu\nStlač '%s' pokud jsi připraven.\nZměř zbývající délku po vytlačení. label_tune_ext_heatoff:Vypnout topení? label_tune_ext_adj_esteps:Nastavení E-Kroků label_tune_ext_esteps_saved:Nové E-kroky uloženy!\nNezapmeň uložit do EEPROM.\nNová hodnota: %0.2f label_tune_ext_measured:Zbývající délka: label_tune_ext_old_estep:Původní E-kroky: %0.2f label_tune_ext_new_estep:Nové E-kroky: %0.2f label_connection_settings:Připojení label_notifications:Oznámení label_mesh_editor:Mesh síť label_mesh_tuner:Mesh nastavení label_case_light:Osvětlení label_load_started:Probíhá zavádění filamentu.\nNení možná další akce, dokud to nebude dokončeno.\nProsím čekejte. label_unload_started:Probíhá vysunování filamentu.\nNení možná další akce, dokud to nebude dokončeno.\nProsím čekejte.. label_heaters_on:Topení jsou stále zapnutá.\nChcete je vypnout? label_print_finished: Tisk\n dokončen label_main_screen:Nabídka label_previous_print_data:Info.tisku label_print_time:Čas tisku: %02u:%02u:%02u label_filament_length:\nDélka filamentu: %1.2fm label_filament_weight:\nVáha filamentu: %1.2fg label_filament_cost:\nCena filamentu: %1.2f label_no_filament_stats:\nStatistika není k dispozici. label_click_for_more:Klikni pro více. label_ext_templow:Teplota trysky je pod minimální teplotou (%d℃). label_heat_hotend:Zahřát trysku na %d℃? label_desired_templow:Teplota trysky je pod požadovanou teplotou (%d℃). label_wait_heat_up:Počkej na cílovou teplotu. label_nozzle_stabilizing:Čekej, tryska se stabilizuje... label_z_align:Z Align label_macros:Makro label_mesh_valid:Test sítě label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_de.ini ================================================ #### Language Code:DE ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:Baudrate label_language:Deutsch label_rotate_ui:UI drehen label_terminal_ack:Zeige ACK im Terminal label_persistent_info:Persistente Status Info label_file_list_mode:Dateien als Liste label_file_sort_by:Sortiere Dateien nach label_ack_notification:ACK - Stil label_emulate_m600:Emuliere M600 label_serial_always_on:Seriell Verbind. immer an label_marlin_fullscreen:Marlin Vollbild label_marlin_show_title:Marlin Titel anz. label_marlin_type:Marlin Modus Typ label_move_speed:Geschwindigkeit (XYZ) label_auto_load_leveling:Auto Laden/Speichern Leveling label_fan_speed_percent:Lüft. Geschw. in Prozent label_xy_offset_probing:XY Offset Probing Untertützung label_z_steppers_alignment:Z Stepper Auto-Justierung label_ps_on:Auto-aus (PS_ON) label_fil_runout:Filament Sensor label_pl_recovery_en:Weitermachen (Stromausfall) label_pl_recovery_home:Achsen nullen (Stromausfall) label_btt_mini_ups:BTT UPS Unterstützung label_touch_sound:Eingabetöne label_toast_sound:Toasts-Töne label_alert_sound:Popups & Alarme label_heater_sound:Ton bei erreichter Temp. label_knob_led_color:Drehknopf LED Farbe label_knob_led_idle:Drehknopf LED idle Farbe label_lcd_brightness:Helligkeit label_lcd_idle_brightness:LCD Helligkeit (Standby) label_lcd_idle_delay:LCD Timer Standby label_start_gcode_enabled:Gcode vor Druck label_end_gcode_enabled:Gcode nach Druck label_cancel_gcode_enabled:Gcode bei Abbruch label_steps_setting:Schritte pro mm label_maxfeedrate:max. Feed Geschwindig. label_maxacceleration:max. Beschleunigung label_acceleration:Beschleunigung label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Nullpunkt Versatz label_fwretract:FW Rückzug label_fwrecover:FW Rückeinschub label_retract_auto:Auto-Rückzug (Firmware) label_hotend_offset:Abstand 2te Düse label_probe_offset:Sensor Versatz label_lin_advance:Linear Advance label_filament_setting:Filament Durchmesser label_current_setting:Treiber Strom (mA) label_bump_sensitivity:TMC Empfindlichkeit label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:Druck Beschl. label_retract_acceleration:Rückzug Beschl. label_travel_acceleration:Fahrt Beschl. label_retract_length:Rückzug Länge label_retract_swap_length:Rückzug Länge (Wechsel) label_retract_feedrate:Geschwindigkeit label_retract_z_lift:Z-Anhebung label_recover_length:extra Länge label_swap_recover_length:extra Länge (Wechsel) label_recover_feedrate:Geschwindigkeit label_swap_recover_feedrate:Geschwindigkeit (Wechsel) label_mbl_offset:MBL Versatz label_save:Speichern label_restore:Laden label_reset:zurückset. label_eeprom_save_info:Einstellungen im EEPROM speichern? label_eeprom_restore_info:Einstellungen aus EEPROM laden? label_eeprom_reset_info:Standardeinstellungen des Druckers wiederherstellen? label_settings_save:Einstellungen speichern label_settings_restore:Einstellungen wiederherst. label_settings_reset:Einstellungen zurücksetzen label_settings_reset_info:Hiermit werden alle Einstellungen zurückgesetzt!\nFortfahren? label_settings_reset_done:Einstellungen wurden erfolgreich zurückgesetzt.\nBitte neustarten. label_page_up:Seite hoch label_page_down:Seite runter label_up:auf label_down:ab label_next:weiter label_back:zurück label_inc:erhöhen label_dec:verringern label_load:Laden label_unload:Entladen label_on:an label_off:aus label_auto:AUTO label_smart:SMART label_slow:langsam label_normal:normal label_fast:schnell label_zero:0 label_half:halb label_full:voll label_custom:Extras label_clear:löschen label_default:Standard label_start:Start label_stop:Stop label_pause:Pause label_resume:Wiederaufnahme label_init:Init label_disconnect:Trennen label_shut_down:aus label_force_shut_down:erzwinge label_emergencystop:NOT-AUS! label_preheat:Vorheizen label_preheat_both:Bett+Düse label_cooldown:Abkühlen label_confirm:OK label_cancel:Abbruch label_warning:Warnung label_continue:Fortsetzen label_confirmation:Sicher? label_status:Status label_ready:Bereit label_busy:Bitte warten ... label_loading:Lade ... label_unconnected:Keine Verbindung zum Drucker! label_info:Info label_invalid_value:Ungültige(r) Wert(e)! label_timeout_reached:Zeit überschritten! label_disconnect_info:Verbindung getrennt! label_shutting_down:Fahre herunter... label_wait_temp_shut_down:Warte bis Düsentemperatur unter\n%d℃ fällt. label_power_failed:Druck fortsetzen? label_process_running:Prozess läuft bereits! label_process_completed:Prozess fertiggestellt! label_process_aborted:Prozess abgebrochen! label_tftsd:TFT SD label_read_tftsd_error:TFT SD Lesefehler! label_tftsd_inserted:SD-Karte eingesteckt! label_tftsd_removed:SD-Karte entfernt! label_u_disk:USB-Stick label_read_u_disk_error:USB-Stick Lesefehler! label_u_disk_inserted:USB-Stick eingesteckt! label_u_disk_removed:USB-Stick entfernt! label_onboardsd:Onboard SD label_read_onboardsd_error:Onboard SD Lesefehler! label_filament_runout:Filament alle! label_disable_steppers:alle lösen label_xy_unlock:löse XY label_start_print:Druck starten:\n%s? label_stop_print:Druck abbrechen? label_is_pause:während Druckvorgang nicht möglich!\nDruck pausieren? label_m0_pause:Pause durch M0 Befehl label_test:Sensortest label_deploy:ausfahren label_stow:einziehen label_repeat:Präzision label_nozzle:Düse label_bed:Heizbett label_chamber:Kammer label_fan:Lüfter label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Sek. label_10_seconds:10 Sek. label_30_seconds:30 Sek. label_60_seconds:1 Min. label_120_seconds:2 Min. label_300_seconds:5 Min. label_white:weiß label_black:schwarz label_blue:blau label_red:rot label_green:grün label_cyan:cyan label_yellow:gelb label_brown:braun label_gray:grau label_orange:orange label_indigo:indigo label_violet:violet label_magenta:magenta label_purple:lila label_lime:grüngelb label_darkblue:dunkelblau label_darkgreen:dunkelgrün label_darkgray:dunkelgrau label_heat:Heizen label_move:Verfahren label_home:Grundst.fahrt label_print:Drucken label_extrude:Extruder label_settings:Parameter label_screen_settings:Bildschirm label_machine_settings:Drucker label_marlin_mode_settings:MarlinMode label_feature_settings:Andere label_sound:Töne label_rgb_settings:LED Farbe label_rgb_off:LED aus label_terminal:Terminal label_leveling:Leveln label_point_1:Punkt 1 label_point_2:Punkt 2 label_point_3:Punkt 3 label_point_4:Punkt 4 label_point_5:Punkt 5 label_bed_leveling:Vermessen label_bl_complete:Bett-Vermessung ausgeführt. label_bl_smart_fill:Fehlende Messpunkte wurden berechent.\n\nBitte speichern! label_bl_enable:BL: an label_bl_disable:BL: aus label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Bett Level (Raster) label_abl_settings:Bett Level (auto) label_abl_settings_bbl:Bett Level (bilinear) label_abl_settings_ubl:Bett Level (Unified) label_abl_settings_ubl_save:im Slot speichern label_abl_settings_ubl_load:aus Slot laden label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Mesh im EEPROM speichern? (laden nach Neustart) label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P Versatz label_h_offset:H Versatz label_distance:Abstand label_load_unload:Laden/Entladen label_load_unload_short:(ent)laden label_touchscreen_adjust:TSC kalib. label_more:Mehr label_screen_info:Info label_bg_color:Hintergrundfarbe label_font_color:Schriftfarbe label_percentage:Prozent label_percentage_speed:Geschw. label_percentage_flow:Fluss label_babystep:BabyStep label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Touchscreen kalibrieren label_adjust_info:Roten Punkt antippen label_adjust_ok:Erfolgreich kalibriert! label_adjust_failed:Kalibrierung fehlgeschlagen!\nErneut versuchen? label_unifiedmove:Bewegung label_unifiedheat:Heiz.Lüft. label_touch_to_exit:Zum Verlassen, Bildschirm berühren. label_mainmenu:Menü label_parameter_setting:Parameter label_eeprom_settings:EEPROM label_leveling_edge_distance:Bettecken-Abstand label_tuning:Justage label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune dauert einige Zeit.\nWeitermachen? label_pid_start_info_2:PID autotune läuft! label_pid_start_info_3:Berühren Sie den Bildschirm erst nach Fertigstellung (grüne LED)! label_tune_extruder:Schritte label_tune_ext_extrude_100:100mm ext. label_tune_ext_temp:Düsentemperatur label_tune_ext_mark120mm:Filament 120 mm über Einlass markieren,\ndann '%s' drücken & nach Extrusion\nerneut messen. label_tune_ext_heatoff:Heizung abschalten? label_tune_ext_adj_esteps:E-Schritte einstellen label_tune_ext_esteps_saved:Neue E-Schritte gespeichert! Bitte auch im EEPROM speichern.\nNeuer Wert: %0.2f label_tune_ext_measured:Restlänge: label_tune_ext_old_estep:alte E-Schritte: %0.2f label_tune_ext_new_estep:neue E-Schritte: %0.2f label_connection_settings:Verbindung label_notifications:Benachrichtigungen label_mesh_editor:Mesh edit. label_mesh_tuner:Mesh anp. label_case_light:Bauraumbeleuchtung label_load_started:Lade Filament.\nBitte warten, bis der Vorgang beendet ist. label_unload_started:Entlade Filament.\nBitte warten, bis der Vorgang beendet ist. label_heaters_on:Heizung noch aktiv.\nSoll das Heizen beendet werden? label_print_finished:Druck beendet! label_main_screen:Hauptmenü label_previous_print_data:Info label_print_time:Druck Zeit: %02u:%02u:%02u label_filament_length:\nFilament Länge: %1.2fm label_filament_weight:\nFilament Gewicht: %1.2fg label_filament_cost:\nFilament Kosten: %1.2f label_no_filament_stats:\nFilament Daten nicht verfügbar. label_click_for_more:Klick für Statistik label_ext_templow:Temperatur der Düse liegt unter dem Minimum (%d℃). label_heat_hotend:Heize Düse auf %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z ausr. label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_du.ini ================================================ #### Language Code:DU ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:Baudsnelheid label_language:Dutch label_rotate_ui:Draai UI label_terminal_ack:Laat ACK in Terminal zien label_persistent_info:Aanhoudende statusinfo label_file_list_mode:Files viewer List Mode label_file_sort_by:Sort files by label_ack_notification:ACK notification style label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:Marlin mode in fullscreen label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:Bewegingssnelheid(X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:Auto Power label_fil_runout:Filament sensor label_pl_recovery_en:Power loss recovery label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:Touch sounds label_toast_sound:Toast Notifications label_alert_sound:Popups and Alerts label_heater_sound:Heater notification label_knob_led_color:Draaiknop LED label_knob_led_idle:Draaiknop LED inactief label_lcd_brightness:Brightness label_lcd_idle_brightness:Idle brightness label_lcd_idle_delay:Idle timeout label_start_gcode_enabled:Start Gcode before print label_end_gcode_enabled:End Gcode after print label_cancel_gcode_enabled:Cancel Gcode label_steps_setting:Stappen permm label_maxfeedrate:Max Feed Rate label_maxacceleration:Max Acceleratie label_acceleration:Acceleratie label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2nd Nozzle label_probe_offset:Probe Offset label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:Driver stroom (mA) label_bump_sensitivity:TMC bump sensitiviteit label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:Afdruk Acceleratie label_retract_acceleration:Retract Acceleratie label_travel_acceleration:Travel Acceleratie label_retract_length:Retract length label_retract_swap_length:Retract swap length label_retract_feedrate:Retract feedrate label_retract_z_lift:Z lift on retraction label_recover_length:Extra recover length label_swap_recover_length:Extra recover swap length label_recover_feedrate:Recover feedrate label_swap_recover_feedrate:Swap recover feedrate label_mbl_offset:MBL Offset label_save:Bewaren label_restore:Herstellen label_reset:Reset label_eeprom_save_info:Sla printer instellingen op naar EEPROM? label_eeprom_restore_info:Herlaad instellingen van de EEPROM? label_eeprom_reset_info:Reset EEPROM naar de standaard printer instellingen? label_settings_save:Save settings label_settings_restore:Herstel instellingen label_settings_reset:Reset instellingen label_settings_reset_info:Reset alle instellingen aar de standaard waardes? label_settings_reset_done:Reset van alle instellingen is succesvol gelukt.\nHerstart alstublieft het apparaat. label_page_up:Blz omhoog label_page_down:Blz omlaag label_up:Omhoog label_down:Omlaag label_next:Volgende label_back:Terug label_inc:Verhogen label_dec:Verlagen label_load:Laden label_unload:Lossen label_on:AAN label_off:UIT label_auto:AUTO label_smart:SLIM label_slow:Traag label_normal:Normaal label_fast:Snel label_zero:Zero label_half:Half label_full:Volledig label_custom:Aangepast label_clear:Clear label_default:Standaard label_start:Start label_stop:Stop label_pause:Pauze label_resume:Hervatten label_init:Init label_disconnect:Loskoppelen label_shut_down:Uitschakelen label_force_shut_down:Forceer Afsluiten label_emergencystop:NOODSTOP label_preheat:Voorverwarmen label_preheat_both:Beide label_cooldown:Afkoelen label_confirm:Bevestig label_cancel:Afbreken label_warning:Waarschuwing label_continue:Verder label_confirmation:Weet u het zeker? label_status:Status label_ready:Gereed label_busy:In verwerking ,wacht aub... label_loading:Opladen... label_unconnected:Geen printer gekoppeld! label_info:Info label_invalid_value:Geen correcte waarde/s voorzien! label_timeout_reached:Time-out bereikt! label_disconnect_info:De printer kan nu door de computer bestuurd worden! label_shutting_down:Afsluiten... label_wait_temp_shut_down:Wacht tot de temperatuur van de spuitkop lager dan %d℃ is label_power_failed:Verder met printen? label_process_running:Process bezig! label_process_completed:Process voltooid! label_process_aborted:Process geannuleerd! label_tftsd:TFT SD label_read_tftsd_error:TFT SD leesfout! label_tftsd_inserted:Kaart geplaatst! label_tftsd_removed:Kaart verwijdert! label_u_disk:U Disk label_read_u_disk_error:U Disk Leesfout! label_u_disk_inserted:U Disk geplaatst! label_u_disk_removed:U Disk verwijdert! label_onboardsd:OnboardSD label_read_onboardsd_error:Onboard SD-kaart leesfout! label_filament_runout:filament op! label_disable_steppers:Disarm All label_xy_unlock:Ontgrendel XY label_start_print:Start afdruk:\n%s? label_stop_print:Stop afdruk? label_is_pause:Kan niet extruderen tijdens printen,\nPauzeer printen? label_m0_pause:Gepauseerd door M0 commando label_test:Test label_deploy:Gebruiken label_stow:Inzetten label_repeat:Herhaal label_nozzle:Spuitneus label_bed:Verwarmd bed label_chamber:Kamer label_fan:Ventilator label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Sec. label_10_seconds:10 Sec. label_30_seconds:30 Sec. label_60_seconds:1 Min. label_120_seconds:2 Min. label_300_seconds:5 Min. label_white:Wit label_black:Zwart label_blue:Blauw label_red:Rood label_green:Groen label_cyan:Cyaan label_yellow:Geel label_brown:Bruin label_gray:Grijs label_orange:Oranje label_indigo:Indigo label_violet:Violet label_magenta:Magenta label_purple:Purple label_lime:Lime label_darkblue:DarkBlue label_darkgreen:DarkGreen label_darkgray:DarkGray label_heat:Verwarm label_move:Verplaats label_home:Thuis label_print:Print label_extrude:Extrudeer label_settings:Instellingen label_screen_settings:Scherm label_machine_settings:Machine label_marlin_mode_settings:MarlinMode label_feature_settings:Kenmerk label_sound:Sound label_rgb_settings:LED Kleur label_rgb_off:LED Uit label_terminal:Terminal label_leveling:Nivelleren label_point_1:Punt 1 label_point_2:Punt 2 label_point_3:Punt 3 label_point_4:Punt 4 label_point_5:Punt 5 label_bed_leveling:Bed Level label_bl_complete:Bed Leveling voltooid label_bl_smart_fill:Missende probe punten zijn slim opgevuld.\n\nNote: Vergeet niet op te slaan! label_bl_enable:BL: aan label_bl_disable:BL: uit label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Sla op naar sleuf label_abl_settings_ubl_load:Laad van sleuf label_abl_slot0:Sleuf 0 label_abl_slot1:Sleuf 1 label_abl_slot2:Sleuf 2 label_abl_slot3:Sleuf 3 label_abl_slot_eeprom:Onthoud sleuf voor volgende reboot? (sla op in EEPROM) label_abl_z:Z vervagen label_level_corner:L corner label_p_offset:P Offset label_h_offset:H Offset label_distance:Afstand label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:TSC Aanpassen label_more:Meer label_screen_info:Info label_bg_color:achtergrond kleur label_font_color:tekst kleur label_percentage:Percentage label_percentage_speed:Snelheid label_percentage_flow:Stromen label_babystep:BabyStap label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Touch Screen Calibratie label_adjust_info:Klik op de rode punt label_adjust_ok:Calibratie Gelukt label_adjust_failed:Calibratie Mislukt, Probeer Opnieuw aub label_unifiedmove:Beweging label_unifiedheat:Verwarm/Ventilator label_touch_to_exit:Aanraken om te verlaten label_mainmenu:Menu label_parameter_setting:Parameter label_eeprom_settings:EEPROM label_leveling_edge_distance:Bed edge distance label_tuning:Tuning label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune zal starten. Dit kan een paar minuten duren.\nDoorgaan? label_pid_start_info_2:PID autotune is bezig! label_pid_start_info_3:Raak het scherm NIET aan totdat deze klaar is (groene LED aan)! label_tune_extruder:Tune steps label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied. Don't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:Connecties label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_en.ini ================================================ #### Language Code:EN ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:BaudRate label_language:English label_rotate_ui:Rotate UI label_terminal_ack:Show ACK in Terminal label_persistent_info:Persistent Status Info label_file_list_mode:Files viewer List Mode label_file_sort_by:Sort files by label_ack_notification:ACK notification style label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:Fullscreen Mode label_marlin_show_title:Show Title label_marlin_type:Marlin Mode Type label_move_speed:Move speed(X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed in Percent label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:Auto Power label_fil_runout:Filament sensor label_pl_recovery_en:Power loss recovery label_pl_recovery_home:Home after power loss label_btt_mini_ups:BTT UPS Support label_touch_sound:Touch sounds label_toast_sound:Toast Notifications label_alert_sound:Popups and Alerts label_heater_sound:Heater notification label_knob_led_color:Rotary Knob LED label_knob_led_idle:Rotary Knob LED idle label_lcd_brightness:Brightness label_lcd_idle_brightness:Idle brightness label_lcd_idle_delay:Idle timeout label_start_gcode_enabled:Start Gcode before print label_end_gcode_enabled:End Gcode after print label_cancel_gcode_enabled:Cancel Gcode label_steps_setting:Steps per mm label_maxfeedrate:Max Feed Rate label_maxacceleration:Max Acceleration label_acceleration:Acceleration label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2nd Nozzle label_probe_offset:Probe Offset label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:Driver Current (mA) label_bump_sensitivity:TMC bump sensitivity label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:Print Acceleration label_retract_acceleration:Retract Acceleration label_travel_acceleration:Travel Acceleration label_retract_length:Retract length label_retract_swap_length:Retract swap length label_retract_feedrate:Retract feedrate label_retract_z_lift:Z lift on retraction label_recover_length:Extra recover length label_swap_recover_length:Extra recover swap length label_recover_feedrate:Recover feedrate label_swap_recover_feedrate:Swap recover feedrate label_mbl_offset:MBL Offset label_save:Save label_restore:Restore label_reset:Reset label_eeprom_save_info:Save printer settings to EEPROM? label_eeprom_restore_info:Reload settings from EEPROM? label_eeprom_reset_info:Reset EEPROM to stock printer settings? label_settings_save:Save settings label_settings_restore:Restore settings label_settings_reset:Reset default settings label_settings_reset_info:Reset all settings to default values? label_settings_reset_done:Reset all settings successful.\nPlease restart the device. label_page_up:Page up label_page_down:Page down label_up:Up label_down:Down label_next:Next label_back:Back label_inc:Increase label_dec:Decrease label_load:Load label_unload:Unload label_on:ON label_off:OFF label_auto:AUTO label_smart:SMART label_slow:Slow label_normal:Normal label_fast:Fast label_zero:Zero label_half:Half label_full:Full label_custom:Custom label_clear:Clear label_default:Default label_start:Start label_stop:Stop label_pause:Pause label_resume:Resume label_init:Init label_disconnect:Disconnect label_shut_down:Shut down label_force_shut_down:Force label_emergencystop:EM. STOP label_preheat:Preheat label_preheat_both:Both label_cooldown:Cool down label_confirm:OK label_cancel:Cancel label_warning:Warning label_continue:Continue label_confirmation:Are you sure? label_status:Status label_ready:Ready label_busy:Busy processing, please wait... label_loading:Loading... label_unconnected:No printer attached! label_info:Info label_invalid_value:Invalid value(s) label_timeout_reached:Timeout reached! label_disconnect_info:Now you can control the printer by your computer! label_shutting_down:Shutting down... label_wait_temp_shut_down:Wait for the hotend temperature to be lower than %d℃ label_power_failed:Continue printing? label_process_running:Process already running! label_process_completed:Process completed! label_process_aborted:Process aborted! label_tftsd:TFT SD label_read_tftsd_error:Read TFT SD card error! label_tftsd_inserted:Card inserted! label_tftsd_removed:Card removed! label_u_disk:U Disk label_read_u_disk_error:Read U Disk error! label_u_disk_inserted:U Disk inserted! label_u_disk_removed:U Disk removed! label_onboardsd:OnboardSD label_read_onboardsd_error:Read Onboard SD card error! label_filament_runout:Filament runout! label_disable_steppers:Disarm All label_xy_unlock:Disarm XY label_start_print:Start Printing:\n%s? label_stop_print:Stop printing? label_is_pause:Action not allowed while printing.\n\nPause printing? label_m0_pause:Paused by M0 command label_test:Test label_deploy:Deploy label_stow:Stow label_repeat:Repeat label_nozzle:Nozzle label_bed:Hotbed label_chamber:Chamber label_fan:Fan label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Sec. label_10_seconds:10 Sec. label_30_seconds:30 Sec. label_60_seconds:1 Min. label_120_seconds:2 Min. label_300_seconds:5 Min. label_white:White label_black:Black label_blue:Blue label_red:Red label_green:Green label_cyan:Cyan label_yellow:Yellow label_brown:Brown label_gray:Gray label_orange:Orange label_indigo:Indigo label_violet:Violet label_magenta:Magenta label_purple:Purple label_lime:Lime label_darkblue:DarkBlue label_darkgreen:DarkGreen label_darkgray:DarkGray label_heat:Heat label_move:Move label_home:Home label_print:Print label_extrude:Extrude label_settings:Settings label_screen_settings:Screen label_machine_settings:Machine label_marlin_mode_settings:MarlinMode label_feature_settings:Feature label_sound:Sound label_rgb_settings:LED Color label_rgb_off:LED Off label_terminal:Terminal label_leveling:Leveling label_point_1:Point 1 label_point_2:Point 2 label_point_3:Point 3 label_point_4:Point 4 label_point_5:Point 5 label_bed_leveling:Bed Level label_bl_complete:Bed Leveling Complete label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save! label_bl_enable:BL: on label_bl_disable:BL: off label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Save to slot label_abl_settings_ubl_load:Load from slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot? label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P Offset label_h_offset:H Offset label_distance:Distance label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:TSC Adjust label_more:More label_screen_info:Info label_bg_color:Background color label_font_color:Font color label_percentage:Percentage label_percentage_speed:Speed label_percentage_flow:Flow label_babystep:BabyStep label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Touch Screen Calibration label_adjust_info:Please click on the red dot label_adjust_ok:Adjustment success label_adjust_failed:Adjustment failed, please try again. label_unifiedmove:Movement label_unifiedheat:Heat/Fan label_touch_to_exit:Touch anywhere to exit label_mainmenu:Menu label_parameter_setting:Parameter Settings label_eeprom_settings:EEPROM label_leveling_edge_distance:Bed edge distance label_tuning:Tuning label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune may take some time to complete.\nContinue? label_pid_start_info_2:PID autotune in progress! label_pid_start_info_3:Do not touch the screen until completed (green LED ON)! label_tune_extruder:Tune steps label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:Connection label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished:Print finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_es.ini ================================================ #### Language Code:ES ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:BaudRate label_language:Español label_rotate_ui:Rotar label_terminal_ack:Show ACK in Terminal label_persistent_info:Persistent Status Info label_file_list_mode:Files viewer List Mode label_file_sort_by:Sort files by label_ack_notification:ACK notification style label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:Marlin mode in fullscreen label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:Move speed(X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:Apag. aut. label_fil_runout:Filament sensor label_pl_recovery_en:Power loss recovery label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:Touch sounds label_toast_sound:Toast Notifications label_alert_sound:Popups and Alerts label_heater_sound:Heater notification label_knob_led_color:Rotary Knob LED label_knob_led_idle:Rotary Knob LED idle label_lcd_brightness:Brightness label_lcd_idle_brightness:Idle brightness label_lcd_idle_delay:Idle timeout label_start_gcode_enabled:Start Gcode before print label_end_gcode_enabled:End Gcode after print label_cancel_gcode_enabled:Cancel Gcode label_steps_setting:Steps per mm label_maxfeedrate:Max Feed Rate label_maxacceleration:Max Acceleration label_acceleration:Acceleration label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2nd Nozzle label_probe_offset:Sonda Compensar label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:Driver Current (mA) label_bump_sensitivity:TMC bump sensitivity label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:Print Acceleration label_retract_acceleration:Retract Acceleration label_travel_acceleration:Travel Acceleration label_retract_length:Retract length label_retract_swap_length:Retract swap length label_retract_feedrate:Retract feedrate label_retract_z_lift:Z lift on retraction label_recover_length:Extra recover length label_swap_recover_length:Extra recover swap length label_recover_feedrate:Recover feedrate label_swap_recover_feedrate:Swap recover feedrate label_mbl_offset:MBL Offset label_save:Grabar label_restore:Restore label_reset:Reset label_eeprom_save_info:Save printer settings to EEPROM? label_eeprom_restore_info:Reload settings from EEPROM? label_eeprom_reset_info:Reset EEPROM to stock printer settings? label_settings_save:Save settings label_settings_restore:Restore settings label_settings_reset:Reset default settings label_settings_reset_info:Reset all settings to default values? label_settings_reset_done:Reset all settings successful.\nplease restart the device. label_page_up:Retroceder label_page_down:Avanzar label_up:Up label_down:Down label_next:Next label_back:Volver label_inc:Aumentar label_dec:Disminur label_load:Cargar label_unload:Descargar label_on:ON label_off:OFF label_auto:AUTO label_smart:SMART label_slow:Despacio label_normal:Normal label_fast:Rápido label_zero:Cero label_half:Mitad label_full:Todo label_custom:Personalizar label_clear:Clear label_default:Default label_start:Start label_stop:Parar label_pause:Pausar label_resume:Continuar label_init:Init label_disconnect:Desconectar label_shut_down:Apagar label_force_shut_down:Forzar Apagado label_emergencystop:PARADA EMERGENCIA label_preheat:Precalentar label_preheat_both:Ambos label_cooldown:Enfriarse label_confirm:Confirmar label_cancel:Cancelar label_warning:Advertencia label_continue:Continuar label_confirmation:Are you sure? label_status:Status label_ready:Preparado label_busy:Procesamiento ocupado, por favor espere... label_loading:Cargando... label_unconnected:¡No hay comunicación con impresora! label_info:Info label_invalid_value:Invalid value(s) label_timeout_reached:Timeout reached! label_disconnect_info:¡Ahora puede controlar la impresora desde su ordenador! label_shutting_down:Apagando... label_wait_temp_shut_down:Espere a que la temperatura del hotend sea inferior a %d℃ label_power_failed:¿Continuar imprimiendo? label_process_running:Process already running! label_process_completed:Process completed! label_process_aborted:Process aborted! label_tftsd:SD TFT label_read_tftsd_error:¡Error en la tarjeta SD TFT! label_tftsd_inserted:¡Tarjeta insertada! label_tftsd_removed:¡Tarjeta extraida! label_u_disk:Pendrive label_read_u_disk_error:¡Error en el Pendrive! label_u_disk_inserted:¡Pendrive insertado! label_u_disk_removed:¡Pendrive extraido! label_onboardsd:SD Placa label_read_onboardsd_error:¡Error en la tarjeta SD de la placa! label_filament_runout:¡Filamento agotado! label_disable_steppers:Disarm All label_xy_unlock:Desbloquear XY label_start_print:Start Printing:\n%s? label_stop_print:¿Desea parar la impresión? label_is_pause:No se puede extruir al imprimir,¿\nPausar la impresión? label_m0_pause:Paused by M0 command label_test:Probar label_deploy:Desplegar label_stow:Plegar label_repeat:Repetir label_nozzle:Punta label_bed:Cama label_chamber:Chamber label_fan:Ventilar label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Sec. label_10_seconds:10 Sec. label_30_seconds:30 Sec. label_60_seconds:1 Min. label_120_seconds:2 Min. label_300_seconds:5 Min. label_white:Blanco label_black:Negro label_blue:Azul label_red:Rojo label_green:Verde label_cyan:Cyan label_yellow:Amarillo label_brown:Marrón label_gray:Gris label_orange:Orange label_indigo:Indigo label_violet:Violet label_magenta:Magenta label_purple:Purple label_lime:Lime label_darkblue:DarkBlue label_darkgreen:DarkGreen label_darkgray:DarkGray label_heat:Calentar label_move:Mover label_home:Origen label_print:Imprimir label_extrude:Extruir label_settings:Configurar label_screen_settings:Pantalla label_machine_settings:Máquina label_marlin_mode_settings:MarlinMode label_feature_settings:Añadidos label_sound:Sound label_rgb_settings:Color LED label_rgb_off:Apagar LED label_terminal:Terminal label_leveling:Nivelar label_point_1:Punto 1 label_point_2:Punto 2 label_point_3:Punto 3 label_point_4:Punto 4 label_point_5:Punto 5 label_bed_leveling:Bed Level label_bl_complete:Bed Leveling Complete label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save! label_bl_enable:BL: on label_bl_disable:BL: off label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Save to slot label_abl_settings_ubl_load:Load from slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot? label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P Offset label_h_offset:H Offset label_distance:Distance label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:Calibrar label_more:Más label_screen_info:Informar label_bg_color:Background color label_font_color:Font color label_percentage:Porcentaje label_percentage_speed:Velocidad label_percentage_flow:Flujo label_babystep:BabyStep label_x_inc:+X label_y_inc:+Y label_z_inc:+Z label_x_dec:-X label_y_dec:-Y label_z_dec:-Z label_x:X label_y:Y label_z:Z label_adjust_title:¡Calibrar la pantalla táctil label_adjust_info:Por favor haga clic en el punto rojo label_adjust_ok:Ajuste correcto label_adjust_failed:Ajuste fallido, por favor intentelo de nuevo label_unifiedmove:Movimiento label_unifiedheat:Calor/Ventilador label_touch_to_exit:Toca cualquier lugar para salir label_mainmenu:Menu label_parameter_setting:Parámetro label_eeprom_settings:EEPROM label_leveling_edge_distance:Bed edge distance label_tuning:Tuning label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune may take some time to complete.\nContinue? label_pid_start_info_2:PID autotune in progress! label_pid_start_info_3:Do not touch the screen until completed (green LED ON)! label_tune_extruder:Tune steps label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:Connection label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_fr.ini ================================================ #### Language Code:FR ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:Vitesse label_language:Français label_rotate_ui:Rotation label_terminal_ack:Afficher ACK sur Terminal label_persistent_info:Temp. toujours affichées label_file_list_mode:Fichiers en mode liste label_file_sort_by:Trier les fichiers par label_ack_notification:Style de notification ACK label_emulate_m600:Emuler M600 label_serial_always_on:Serial toujours actif label_marlin_fullscreen:Mode Marlin plein écran label_marlin_show_title:Titre en Mode Marlin label_marlin_type:Type du Mode Marlin label_move_speed:Vitesse de déplacement (X Y Z) label_auto_load_leveling:Auto-Sauvegarde Leveling label_fan_speed_percent:Vitesse ventilateur en % label_xy_offset_probing:Support XY Offset label_z_steppers_alignment:Auto-Alignement moteurs Z label_ps_on:Extinction automatique label_fil_runout:Capteur de filament label_pl_recovery_en:Reprise après coupure label_pl_recovery_home:Home avant reprise label_btt_mini_ups:Support BTT UPS label_touch_sound:Son des touches label_toast_sound:Notifications label_alert_sound:Popups et alertes label_heater_sound:Notification de chauffe label_knob_led_color:LED du bouton rotatif label_knob_led_idle:Veille du bouton rotatif label_lcd_brightness:Luminosité label_lcd_idle_brightness:Diminution luminosité label_lcd_idle_delay:Durée avant diminution label_start_gcode_enabled:Gcode avant l'impression label_end_gcode_enabled:Gcode après l'impression label_cancel_gcode_enabled:Gcode d'annulation label_steps_setting:Steps par mm label_maxfeedrate:Vitesses maximales label_maxacceleration:Accélérations maximales label_acceleration:Accélérations label_jerk:Jerk label_junction_deviation:Ecart de jonction label_home_offset:Décalage Home label_fwretract:Rétraction firmware label_fwrecover:Récupération firmware label_retract_auto:Rétraction firmware auto label_hotend_offset:Offset 2ème Buse label_probe_offset:Décalage palpeur label_lin_advance:Linear Advance label_filament_setting:Diamètre filament label_current_setting:Courant drivers (mA) label_bump_sensitivity:Sensibilité TMC label_hybrid_threshold:Seuil Hybride TMC label_stealth_chop:StealthChop TMC label_print_acceleration:Impression label_retract_acceleration:Rétraction label_travel_acceleration:Déplacements label_retract_length:Longueur label_retract_swap_length:Longueur de retrait label_retract_feedrate:Vitesse label_retract_z_lift:Décalage en Z label_recover_length:Longueur label_swap_recover_length:Longueur de retrait label_recover_feedrate:Vitesse label_swap_recover_feedrate:Vitesse de retrait label_mbl_offset:Offset MBL label_save:Sauver label_restore:Restaurer label_reset:Reset label_eeprom_save_info:Enregistrer les paramètres dans l'EEPROM ? label_eeprom_restore_info:Restaurer les paramètres de l'EEPROM ? label_eeprom_reset_info:Réinitialiser l'EEPROM aux paramètres d'origine du firmware ? label_settings_save:Sauvegarder paramètres label_settings_restore:Restaurer paramètres label_settings_reset:RàZ des paramètres label_settings_reset_info:Réinitialiser tous les paramètres aux valeurs par défaut ? label_settings_reset_done:Réinitialisation des paramètres réalisé avec succès.\nVeuillez redémarrer l'imprimante. label_page_up:Précédent label_page_down:Suivant label_up:Monter label_down:Descendre label_next:Suivant label_back:Retour label_inc:Plus label_dec:Moins label_load:Charger label_unload:Décharger label_on:ON label_off:OFF label_auto:AUTO label_smart:SMART label_slow:Lent label_normal:Normal label_fast:Rapide label_zero:Zéro label_half:Moitié label_full:Max label_custom:Custom label_clear:Effacer label_default:Défaut label_start:Démarrer label_stop:Stopper label_pause:Pause label_resume:Reprendre label_init:Init label_disconnect:Libérer label_shut_down:Eteindre label_force_shut_down:Forcer l'extinction label_emergencystop:Arrêt label_preheat:Préparer label_preheat_both:Global label_cooldown:Refroidir label_confirm:Confirmer label_cancel:Annuler label_warning:Attention label_continue:Continuer label_confirmation:Êtes-vous sûr ? label_status:Statut label_ready:Prête label_busy:Occupée, veuillez patienter... label_loading:Chargement... label_unconnected:Aucune imprimante connectée ! label_info:Infos label_invalid_value:Aucune valeur valide fournie ! label_timeout_reached:Délai d'attente dépassé ! label_disconnect_info:Vous pouvez maintenant contrôler l'imprimante depuis votre ordinateur ! label_shutting_down:Extinction en cours... label_wait_temp_shut_down:Attendez que la température de la buse soit inférieure à %d℃ label_power_failed:Continuer l'impression ? label_process_running:Processus en cours ! Veuillez patienter label_process_completed:Processus terminé ! label_process_aborted:Processus annulé ! label_tftsd:SD TFT label_read_tftsd_error:Erreur de lecture de la carte SD TFT ! label_tftsd_inserted:Carte insérée ! label_tftsd_removed:Carte retirée ! label_u_disk:Clé USB label_read_u_disk_error:Erreur de lecture de la clé USB ! label_u_disk_inserted:Clé USB insérée ! label_u_disk_removed:Clé USB retirée ! label_onboardsd:SD interne label_read_onboardsd_error:Erreur de lecture de la carte SD interne ! label_filament_runout:Fin de Filament ! label_disable_steppers:Moteurs label_xy_unlock:Moteurs XY label_start_print:Démarrer l'impression :\n%s ? label_stop_print:Arrêter l'impression ? label_is_pause:Extrusion impossible quand l'impression est en cours.\nMettre l'impression en pause ? label_m0_pause:Suspendu par la commande M0 label_test:Tester label_deploy:Déployer label_stow:Rentrer label_repeat:Répéter label_nozzle:Buse label_bed:Plateau label_chamber:Caisson label_fan:Ventiler label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Sec. label_10_seconds:10 Sec. label_30_seconds:30 Sec. label_60_seconds:1 Min. label_120_seconds:2 Min. label_300_seconds:5 Min. label_white:Blanc label_black:Noir label_blue:Bleu label_red:Rouge label_green:Vert label_cyan:Cyan label_yellow:Jaune label_brown:Marron label_gray:Gris label_orange:Orange label_indigo:Indigo label_violet:Violette label_magenta:Magenta label_purple:Violet label_lime:Lime label_darkblue:Bleu Foncé label_darkgreen:Vert Foncé label_darkgray:Gris Foncé label_heat:Chauffer label_move:Déplacer label_home:Home label_print:Imprimer label_extrude:Extruder label_settings:Options label_screen_settings:Écran label_machine_settings:Machine label_marlin_mode_settings:Marlin label_feature_settings:Paramètres label_sound:Son label_rgb_settings:LED label_rgb_off:LED Off label_terminal:Terminal label_leveling:Niveaux label_point_1:Point 1 label_point_2:Point 2 label_point_3:Point 3 label_point_4:Point 4 label_point_5:Point 5 label_bed_leveling:ABL label_bl_complete:Nivellement terminé label_bl_smart_fill:Les points de sonde manquants ont été intelligemment remplis.\n\nNote : n'oubliez pas de sauvegarder ! label_bl_enable:BL On label_bl_disable:BL Off label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Nivellement Mesh label_abl_settings:Nivellement Auto label_abl_settings_bbl:Nivellement Bilinéaire label_abl_settings_ubl:Nivellement Unifié label_abl_settings_ubl_save:Enregistrer dans l'emplacement label_abl_settings_ubl_load:Charger depuis l'emplacement label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Se souvenir de l'emplacement au prochain redémarrage ?\n(Sauvegarde EEPROM) label_abl_z:Z Fade label_level_corner:L Corner label_p_offset:Z Offset label_h_offset:H Offset label_distance:Distance label_load_unload:Charger/Décharger label_load_unload_short:Dé/Charger label_touchscreen_adjust:Ajuster label_more:Plus label_screen_info:Infos label_bg_color:Arrière-plan label_font_color:Police label_percentage:Avancement label_percentage_speed:Vitesse label_percentage_flow:Débit label_babystep:BabyStep label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Calibration écran tactile label_adjust_info:Veuillez toucher le point rouge label_adjust_ok:Succès de l'ajustement label_adjust_failed:Ajustement incorrect, veuillez réessayer label_unifiedmove:Mouvement label_unifiedheat:Chauffer label_touch_to_exit:Toucher n'importe où pour quitter label_mainmenu:Menu label_parameter_setting:Réglages label_eeprom_settings:EEPROM label_leveling_edge_distance:Distance au bord du plateau label_tuning:Tuning label_pid:PID label_pid_title:Autocalibrage PID label_pid_start_info:L'autocalibrage PID va être lancé. Cela peut prendre quelques minutes.\nContinuer ? label_pid_start_info_2:Autocalibrage PID en cours ! label_pid_start_info_3:Ne touchez pas l'écran avant la fin (LED verte allumée) ! label_tune_extruder:Extrudeur label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Réglage de l'extrudeur label_tune_ext_mark120mm:Marquer 120 mm sur le filament\nAppuyer ensuite sur '%s'\nMesurer la longueur restante label_tune_ext_heatoff:Arrêter la chauffe ? label_tune_ext_adj_esteps:Ajustement E-Steps label_tune_ext_esteps_saved:Nouveau E-steps enregistré ! label_tune_ext_measured:Longueur restante label_tune_ext_old_estep:Ancien : %0.2f label_tune_ext_new_estep:Nouveau : %0.2f label_connection_settings:Connexion label_notifications:Notifications label_mesh_editor:Maillage label_mesh_tuner:Edition du maillage label_case_light:Caisson label_load_started:Chargement du filament en cours.\nVeuillez attendre la fin du processus. label_unload_started:Déchargement du filament en cours.\nVeuillez attendre la fin du processus. label_heaters_on:Certains éléments sont toujours en chauffe.\nVoulez-vous les arrêter ? label_print_finished: Impression\n terminée label_main_screen:Menu label_previous_print_data:Résumé label_print_time:Durée : %02u:%02u:%02u label_filament_length:\nLongueur du filament : %1.2fm label_filament_weight:\nPoids du filament : %1.2fg label_filament_cost:\nCoût du filament : %1.2f label_no_filament_stats:\nAucune statistique de filament. label_click_for_more:Afficher résumé label_ext_templow:La température de la buse est inférieure à la température minimale (%d℃). label_heat_hotend:Chauffer la buse à %d℃ ? label_desired_templow:La température de la buse est inférieure à la température désirée (%d℃). label_wait_heat_up:Attendre la chauffe. label_nozzle_stabilizing:Patientez, stabilisation de la buse... label_z_align:Z Align label_macros:Macros label_mesh_valid:Test Mesh label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_gr.ini ================================================ #### Language Code:GR ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:BaudRate label_language:Ελληνικά label_rotate_ui:Περιστροφή UI label_terminal_ack:Εμφάνιση ACK στο τερματικό label_persistent_info:Πληροφορίες μόνιμης κατάστασης label_file_list_mode:Λειτουργία λίστας προβολής αρχείων label_file_sort_by:Sort files by label_ack_notification:ACK notification style label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:Λειτουργία Marlin σε πλήρη οθόνη label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:Ταχύτητα κίνησης(X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:Αυτόματη απενεργοποίηση label_fil_runout:Αισθητήρας νήματος label_pl_recovery_en:Power loss recovery label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:Touch sounds label_toast_sound:Toast Notifications label_alert_sound:Popups and Alerts label_heater_sound:Heater notification label_knob_led_color:LED περιστροφικού κουμπιού label_knob_led_idle:Rotary Knob LED idle label_lcd_brightness:Φωτεινότητα label_lcd_idle_brightness:Φωτεινότητα LCD σκοτεινή label_lcd_idle_delay:Xρονομετρητής αδράνειας οθόνης label_start_gcode_enabled:Αρχικό Gcode προ εκτύπωσης label_end_gcode_enabled:Τερματικό Gcode εφότου εκτύπωσης label_cancel_gcode_enabled:Ματαίωση Gcode label_steps_setting:Βήματα ανά χιλ label_maxfeedrate:Μέγιστο ποσοστό τροφοδοσίας label_maxacceleration:Μέγιστη επιτάχυνση label_acceleration:Eπιτάχυνση label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2nd Nozzle label_probe_offset:Αντιστάθμιση Καθετήρας label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:Ένταση η. ρεύ. οδηγού(mA) label_bump_sensitivity:TMC ευαισθησία χτυπήματος label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:Επιτάχυνση εκτύπωσης label_retract_acceleration:Eπιτάχυνση ανάκλησης label_travel_acceleration:Επιτάχυνση ταξιδιού label_retract_length:Retract length label_retract_swap_length:Retract swap length label_retract_feedrate:Retract feedrate label_retract_z_lift:Z lift on retraction label_recover_length:Extra recover length label_swap_recover_length:Extra recover swap length label_recover_feedrate:Recover feedrate label_swap_recover_feedrate:Swap recover feedrate label_mbl_offset:MBL Offset label_save:Αποθήκευση label_restore:Restore label_reset:Επαναφορά label_eeprom_save_info:Save printer settings to EEPROM? label_eeprom_restore_info:Reload settings from EEPROM? label_eeprom_reset_info:Reset EEPROM to stock printer settings? label_settings_save:Save settings label_settings_restore:Restore settings label_settings_reset:Reset default settings label_settings_reset_info:Όλες οι ρυθμίσεις θα επαναφερθούν στις προεπιλεγμένες τιμές. Συνεχίσει? label_settings_reset_done:Η επαναφορά όλων των ρυθμίσεων ολοκληρώθηκε με επιτυχία. \nΓια πλήρη εφαρμογή,\nπαρακάλω επανεκκινήστε τη συσκευή σας. label_page_up:Σελίδα πάνω label_page_down:Σελίδα κάτω label_up:Up label_down:Down label_next:Next label_back:Πίσω label_inc:Αύξηση label_dec:Μείωση label_load:Φόρτωση label_unload:Ξεφόρτωση label_on:Ενεργό label_off:Σβηστό label_auto:AUTO label_smart:ΈΞΥΠΝΟ label_slow:Αργά label_normal:Κανονικά label_fast:Γρήγορα label_zero:Μηδέν label_half:Μισή ταχύτητα label_full:Ολοταχώς label_custom:Τροποποιημένο label_clear:Clear label_default:Default label_start:Start label_stop:Τερμάτιση label_pause:Παύση label_resume:Ξαναρχίσει label_init:Init label_disconnect:Αποσυνδέσει label_shut_down:Απενεργοποίηση label_force_shut_down:Αναγκαστική απενεργοποίηση label_emergencystop:Σταμάτημα έκτακτης ανάγκης label_preheat:Προθέρμανση label_preheat_both:Και τα δυο label_cooldown:Κρυώσει label_confirm:Εντάξει label_cancel:Ματαίωση label_warning:Προειδοποίηση label_continue:Συνέχεια label_confirmation:Are you sure? label_status:ΚΑΤΑΣΤΑΣΗ label_ready:Έτοιμο label_busy:Απασχολημένη επεξεργασία, παρακάλω περιμένετε ... label_loading:Φόρτωση... label_unconnected:Δεν υπάρχει συνδεδεμένος εκτυπωτής! label_info:Πληροφορίες label_invalid_value:Invalid value(s) label_timeout_reached:Timeout reached! label_disconnect_info:Τώρα μπορείτε να ελέγξετε τον εκτυπωτή από τον υπολογιστή σας! label_shutting_down:Απενεργοποίηση... label_wait_temp_shut_down:Περιμένετε για την θερμοκρασία του hotend να πέσει χαμηλότερα απο %d℃ label_power_failed:Συνέχεια εκτύπωσης; label_process_running:Process already running! label_process_completed:Process completed! label_process_aborted:Process aborted! label_tftsd:TFT SD label_read_tftsd_error:Σφάλμα ανάγνωσης κάρτας SD οθόνης! label_tftsd_inserted:Η κάρτα έχει εισαχθεί! label_tftsd_removed:Η κάρτα αφαιρέθηκε! label_u_disk:USB Δίσκος label_read_u_disk_error:Σφάλμα ανάγνωσης USB Δίσκου! label_u_disk_inserted:Ο USB Δίσκος έχει εισαχθεί! label_u_disk_removed:Ο USB Δίσκος αφαιρέθηκε! label_onboardsd:Ενσωματωμένη κάρτα SD label_read_onboardsd_error:Σφάλμα ανάγνωσης ενσωματωμένης κάρτας SD! label_filament_runout:τελείωσε το νημά! label_disable_steppers:Disarm All label_xy_unlock:Disarm XY label_start_print:Start Printing:\n%s? label_stop_print:Διακοπή εκτύπωσης? label_is_pause:Δεν είναι δυνατή η εξώθηση κατα τη δυάρκεια εκτύπωσης.\nΠαύση εκτύπωσης? label_m0_pause:Διακόπηκε λόγω M0 εντολής label_test:Δοκιμή label_deploy:Επέκταση label_stow:Aπόσυρση label_repeat:Επανάληψη label_nozzle:Στόμιο label_bed:Θερμή Βάση label_chamber:Chamber label_fan:Ανεμιστήρας label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01χιλ label_01_mm:0.1χιλ label_1_mm:1χιλ label_5_mm:5χιλ label_10_mm:10χιλ label_100_mm:100χιλ label_200_mm:200χιλ label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Δευτ. label_10_seconds:10 Δευτ. label_30_seconds:30 Δευτ. label_60_seconds:1 Λεπτό label_120_seconds:2 Λεπτά label_300_seconds:5 Λεπτά label_white:Άσπρο label_black:Μάυρο label_blue:Μπλέ label_red:Κόκκινο label_green:Πράσινο label_cyan:Κυανό label_yellow:Κίτρινο label_brown:Καφέ label_gray:Γκρί label_orange:Πορτοκάλι label_indigo:Ινδικό label_violet:Βιολετί label_magenta:Πορφύρα label_purple:Μωβ label_lime:Πρασινοκίτρινο label_darkblue:Σκούρο μπλε label_darkgreen:Σκούρο πράσινο label_darkgray:Σκούρο γκρίζο label_heat:Θέρμανση label_move:Μετακίνηση label_home:Αυτο-Κατεύθυνση label_print:Εκτύπωση label_extrude:Εκβολή label_settings:Ρυθμίσεις label_screen_settings:Οθόνη label_machine_settings:Μηχανήματος label_marlin_mode_settings:MarlinMode label_feature_settings:Χαρακτηριστικών label_sound:Sound label_rgb_settings:Χρώμα LED label_rgb_off:Απενεργοποίηση LED label_terminal:Τερματικό label_leveling:Ισοπέδωση label_point_1:Σημείο 1 label_point_2:Σημείο 2 label_point_3:Σημείο 3 label_point_4:Σημείο 4 label_point_5:Σημείο 5 label_bed_leveling:Bed Level label_bl_complete:Bed Leveling Complete label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save! label_bl_enable:BL: on label_bl_disable:BL: off label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Save to slot label_abl_settings_ubl_load:Load from slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot? label_abl_z:Z Fade label_level_corner:L corner label_p_offset:Αντιστάθμιση P label_h_offset:Αντιστάθμιση H label_distance:Distance label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:Προσαρμογή TOUCH label_more:Περισσότερα label_screen_info:Πληροφορίες label_bg_color:Background color label_font_color:Font color label_percentage:Ποσοστό label_percentage_speed:Ταχύτητα label_percentage_flow:Ροή label_babystep:Μικροβήμα label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Βαθμονόμηση οθόνης αφής label_adjust_info:Κάντε κλικ στην κόκκινη κουκκίδα label_adjust_ok:Επιτυχία προσαρμογής label_adjust_failed:Η προσαρμογή απέτυχε. Δοκιμάστε ξανά label_unifiedmove:Κίνηση label_unifiedheat:Θέρμανση/Ανεμιστήρας label_touch_to_exit:Αγγίξτε οπουδήποτε για έξοδο label_mainmenu:Μενού label_parameter_setting:Ρυθμίσεις παραμέτρων label_eeprom_settings:EEPROM label_leveling_edge_distance:Bed edge distance label_tuning:Tuning label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune may take some time to complete.\nContinue? label_pid_start_info_2:PID autotune in progress! label_pid_start_info_3:Do not touch the screen until completed (green LED ON)! label_tune_extruder:Tune steps label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:Connection label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_hu.ini ================================================ #### Language Code:HU ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:Kapcsolat label_language:Magyar label_rotate_ui:Forgatás label_terminal_ack:ACK Megjelenítése label_persistent_info:Állandó állapotinfó label_file_list_mode:Fájlnéző listamód label_file_sort_by:Fájlok rendezése label_ack_notification:ACK Értesítési stílus label_emulate_m600:Emulált M600 label_serial_always_on:Soros port folytonos label_marlin_fullscreen:Nagyképernyős Marlin mód label_marlin_show_title:Marlin mód cím támogatás label_marlin_type:Marlin mód típusa label_move_speed:Mozgás seb. (X-Y-Z) label_auto_load_leveling:Szint. auto-mentés/töltés label_fan_speed_percent:Ventilátor sebesség %-ban label_xy_offset_probing:X-Y Végpont tapintás tám. label_z_steppers_alignment:Z Motorok automata igazí. label_ps_on:Automata kikapcsolás label_fil_runout:Szál érzékelő label_pl_recovery_en:Energiavesztés helyreáll. label_pl_recovery_home:Áramkimaradás helyreáll. label_btt_mini_ups:BTT UPS Támogatás label_touch_sound:Érintés hang label_toast_sound:Értesítés hang label_alert_sound:Riasztás hang label_heater_sound:Fűtés hang label_knob_led_color:Forgatógomb LED label_knob_led_idle:Forgatógomb tétlen label_lcd_brightness:Fényerősség label_lcd_idle_brightness:LCD Halványítás label_lcd_idle_delay:LCD Halványítási idő label_start_gcode_enabled:Kezdő G-Kód label_end_gcode_enabled:Befejező G-Kód label_cancel_gcode_enabled:Leállító G-Kód label_steps_setting:Lépés beállítás label_maxfeedrate:Max előtolási sebesség label_maxacceleration:Max gyorsulás label_acceleration:Gyorsulás label_jerk:Rántás label_junction_deviation:Keresztezés eltérés label_home_offset:Kezdőpont eltolás label_fwretract:FW Visszahúzás label_fwrecover:FW Visszanyomás label_retract_auto:Automata visszahúz. label_hotend_offset:Második fej eltolása label_probe_offset:Szonda eltolás label_lin_advance:Lineáris haladás label_filament_setting:Filament átmérő label_current_setting:Motoráramok beállítása label_bump_sensitivity:TMC Ütközés érzékenység label_hybrid_threshold:TMC Hibrid küszöbérték label_stealth_chop:TMC StealthChop label_print_acceleration:Nyomtatás gyorsulás label_retract_acceleration:Visszahúzás gyorsulás label_travel_acceleration:Utazási gyorsulás label_retract_length:Visszahúzás hossz label_retract_swap_length:Csere hossz vissza. label_retract_feedrate:Visszahúzás előtol. label_retract_z_lift:Z Emelése visszahú. label_recover_length:Hossz javítás label_swap_recover_length:Cserehossz javítás label_recover_feedrate:Előtolás javítás label_swap_recover_feedrate:Csere előtolás jav. label_mbl_offset:MBL Eltolás label_save:Mentés label_restore:Visszaállítás label_reset:Alapállítás label_eeprom_save_info:Mented a megváltozott beállításokat az EEPROM-ba? label_eeprom_restore_info:Betöltöd a beállításokat az EEPROM-ból? label_eeprom_reset_info:Visszaállítod az EEPROM-ot a gyári beállításokra? label_settings_save:Beállítások mentése label_settings_restore:Beállítások újratöltése label_settings_reset:Beállítások visszaáll. label_settings_reset_info:Minden beállítás vissza fog állni alapértelmezett értékre. Folytatod? label_settings_reset_done:A beállítások visszaállítása sikeresen megtörtént.\nAz aktiváláshoz indítsd újra az eszközt. label_page_up:Oldal fel label_page_down:Oldal le label_up:Fel label_down:Le label_next:Tovább label_back:Vissza label_inc:Növel label_dec:Csökkent label_load:Betöltés label_unload:Kiadás label_on:BE label_off:KI label_auto:AUTO label_smart:OKOS label_slow:Lassú label_normal:Normál label_fast:Gyors label_zero:Nulla label_half:Fél label_full:Teljes label_custom:Egyedi label_clear:Törlés label_default:Alapért. label_start:Kezdés label_stop:Állj label_pause:Szünet label_resume:Folytatás label_init:Kezdet label_disconnect:Leválaszt label_shut_down:Leállítás label_force_shut_down:Kényszerít label_emergencystop:Vész-STOP label_preheat:Előfűtés label_preheat_both:Mindkettő label_cooldown:Hűtés label_confirm:Oké label_cancel:Mégse label_warning:Figyelem! label_continue:Folytatás label_confirmation:Biztos vagy benne? label_status:Státusz label_ready:Kész label_busy:Feldolgozás alatt, kérlek várj... label_loading:Betöltés... label_unconnected:Nincs nyomtató csatlakoztatva! label_info:Infó label_invalid_value:Nincs érvényes érték megadva label_timeout_reached:Időkorlát elérve! label_disconnect_info:Most a számítógépről vezérelheted a nyomtatót! label_shutting_down:Leállítás... label_wait_temp_shut_down:Várd meg a fej visszahűlését.%d℃ label_power_failed:Folytatod a nyomtatást? label_process_running:Folyamat fut! label_process_completed:Folyamat befejezve! label_process_aborted:Folyamat megszakítva! label_tftsd:TFT-SD label_read_tftsd_error:TFT-SD olvasási hiba! label_tftsd_inserted:SD-Kártya behelyezve! label_tftsd_removed:SD-Kártya eltávolítva! label_u_disk:USB Tár label_read_u_disk_error:USB olvasási hiba! label_u_disk_inserted:USB behelyezve! label_u_disk_removed:USB eltávolítva! label_onboardsd:Lap-SD label_read_onboardsd_error:Alaplap-SD olvasási hiba! label_filament_runout:Szál kifutás! label_disable_steppers:Mot.tilt label_xy_unlock:X-Y Felold label_start_print:%s\nfájl kiválasztva.\nElindítod a nyomtatását? label_stop_print:Megállítod a nyomtatást? label_is_pause:A művelet tiltva van a nyomtatás alatt.\nSzünetelteted a nyomtatást? label_m0_pause:Szünetelés M0 parancsal label_test:Teszt label_deploy:Bevetés label_stow:Elhelyezés label_repeat:Ismétlés label_nozzle:Fej label_bed:Ágy label_chamber:Kamra label_fan:Ventilátor label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Mp. label_10_seconds:10 Mp. label_30_seconds:30 Mp. label_60_seconds:1 Perc. label_120_seconds:2 Perc. label_300_seconds:5 Perc. label_white:Fehér label_black:Fekete label_blue:Kék label_red:Piros label_green:Zöld label_cyan:Cián label_yellow:Sárga label_brown:Barna label_gray:Szürke label_orange:Narancs label_indigo:Indigó label_violet:Viola label_magenta:Bíborvörös label_purple:Lila label_lime:Mész label_darkblue:Sötétkék label_darkgreen:Sötétzöld label_darkgray:Sötétszürke label_heat:Fűtés label_move:Mozgás label_home:Végállás label_print:Nyomtatás label_extrude:Adagolás label_settings:Opciók label_screen_settings:Kijelző label_machine_settings:Gép label_marlin_mode_settings:Marlin mód label_feature_settings:Funkciók label_sound:Hangok label_rgb_settings:LED Szín label_rgb_off:LED Ki label_terminal:Terminál label_leveling:Szintezés label_point_1:1. pont label_point_2:2. pont label_point_3:3. pont label_point_4:4. pont label_point_5:5. pont label_bed_leveling:Ágyszint label_bl_complete:Ágy szintezése sikeres. label_bl_smart_fill:A hiányzó szonda pontok kitöltésre kerültek.\nMegjegyzés: Mentsd el! label_bl_enable:BL: be label_bl_disable:BL: ki label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Kézi rács szintezés label_abl_settings:Automata szintezés label_abl_settings_bbl:Bilineáris szintezés label_abl_settings_ubl:Egységes szintezés label_abl_settings_ubl_save:Mentés szlotba label_abl_settings_ubl_load:Betöltés szlotból label_abl_slot0:Szlot 0 label_abl_slot1:Szlot 1 label_abl_slot2:Szlot 2 label_abl_slot3:Szlot 3 label_abl_slot_eeprom:Emlékezzen a következő újraindításnál? (EEPROM Mentése) label_abl_z:Z Áttűnés label_level_corner:Sarok szint label_p_offset:P Eltolás label_h_offset:H Eltolás label_distance:Távolság label_load_unload:Betöltés/Kiadás label_load_unload_short:Be/Ki label_touchscreen_adjust:Igazítás label_more:Több label_screen_info:Infó label_bg_color:Háttérszín label_font_color:Betűszín label_percentage:Százalék label_percentage_speed:Sebesség label_percentage_flow:Hozam label_babystep:Mikrolépés label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Érintőképernyő kalibrálása. label_adjust_info:Kattints a piros pontra. label_adjust_ok:Kalibrálás sikeres. label_adjust_failed:A kalibrálás sikertelen, próbáld újra. label_unifiedmove:Mozgás label_unifiedheat:Fűt/Hűt label_touch_to_exit:Érintsd meg a kilépéshez. label_mainmenu:Főmenü label_parameter_setting:Tényezők label_eeprom_settings:EEPROM label_leveling_edge_distance:Ágyszél távolság label_tuning:Hangolás label_pid:PID label_pid_title:PID Automatikus hangolás label_pid_start_info:A PID önhangolása elindul. Percekig is eltarthat.\nFolytatod? label_pid_start_info_2:PID Automatikus hangolása zajlik! label_pid_start_info_3:NE ÉRINTSD meg a kijelzőt míg nincs kész! (Zöld LED jelzi!) label_tune_extruder:Lépés hangolás label_tune_ext_extrude_100:Kiad 100mm label_tune_ext_temp:Adagoló hangolás | Fűt label_tune_ext_mark120mm:A 120mm-t jelöld be a szálon\nNyomd '%s' ha kész\nMérd meg a hátralévő hosszt adagolás után. label_tune_ext_heatoff:Kikapcsolod a fűtést? label_tune_ext_adj_esteps:E-lépés állítás label_tune_ext_esteps_saved:Új E-lépés mentve!\nNe felejtsd el menteni EEPROM-ba.\nÚj érték: %0.2f label_tune_ext_measured:Hátramaradt hossz: label_tune_ext_old_estep:Régi e-lépés: %0.2f label_tune_ext_new_estep:Új e-lépés: %0.2f label_connection_settings:Kapcsolat label_notifications:Értesítések label_mesh_editor:Háló szerkesztő label_mesh_tuner:Háló hangoló label_case_light:Gépház világítás label_load_started:A szál betöltése folyamatban van,\nnem lehetséges további művelet, míg véget nem ér.\nKérlek várj! label_unload_started:A szál kiadása folyamatban van,\nnem lehetséges további művelet, míg véget nem ér.\nKérlek várj! label_heaters_on:Néhány fűtőelem még üzemel.\nKikapcsolod a fűtőelemeket? label_print_finished: Nyomtatás\n elkészült! label_main_screen:Főoldal label_previous_print_data:Összegzés label_print_time:Nyomtatási idő: %02u:%02u:%02u label_filament_length:\nSzál hossza: %1.2fm label_filament_weight:\nSzál súlya: %1.2fg label_filament_cost:\nSzál költség: %1.2f label_no_filament_stats:\nNincs szál statisztika. label_click_for_more:Kattints az összegzésért. label_ext_templow:Fejhőfok alacsonyabb, mint a minimális hőfok (%d℃). label_heat_hotend:Fűtöd a fejet %d℃-ra? label_desired_templow:Fejhőfok alacsonyabb, mint a\nkívánt hőfok (%d℃). label_wait_heat_up:Várj, míg felmelegszik. label_nozzle_stabilizing:Fejhőfok stabilizálódik... label_z_align:Z Igazítás label_macros:Makrók label_mesh_valid:Háló ellenőrzése label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_it.ini ================================================ #### Language Code:IT ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:Baudrate label_language:Italiano label_rotate_ui:Ruota label_terminal_ack:Mostra ACK in console label_persistent_info:Mostra barra di stato label_file_list_mode:File in modalità lista label_file_sort_by:Ordina file per label_ack_notification:Tipo di popup label_emulate_m600:Emula M600 label_serial_always_on:Seriale sempre accesa label_marlin_fullscreen:Marlin a schermo intero label_marlin_show_title:Mostra titolo in Marlin label_marlin_type:Modalità Marlin label_move_speed:Vel. movimenti(X Y Z) label_auto_load_leveling:Auto salva/carica liv. label_fan_speed_percent:Ventola in percentuale label_xy_offset_probing:Supp. probing offset XY label_z_steppers_alignment:Auto allineamento asse Z label_ps_on:Auto spegnimento label_fil_runout:Sensore filamento label_pl_recovery_en:Power loss recovery label_pl_recovery_home:Power loss rec. homing label_btt_mini_ups:Supporto a BTT UPS label_touch_sound:Suono al tocco label_toast_sound:Notifiche toast label_alert_sound:Popup e avvisi label_heater_sound:Notifica temperatura label_knob_led_color:LED manopola label_knob_led_idle:LED manopola spento label_lcd_brightness:Luminosità label_lcd_idle_brightness:Luminosità in idle label_lcd_idle_delay:Timer luminosità label_start_gcode_enabled:Inserisci start gcode label_end_gcode_enabled:Inserisci end gcode label_cancel_gcode_enabled:Script canc. stampa label_steps_setting:Step per mm label_maxfeedrate:Feedrate massimo label_maxacceleration:Accelerazione massima label_acceleration:Accelerazione label_jerk:Jerk label_junction_deviation:Junction deviation label_home_offset:Home offset label_fwretract:Retrazione firmware label_fwrecover:Retrazione firmware rec. label_retract_auto:Retrazione firmware label_hotend_offset:Offset secondo hotend label_probe_offset:Probe offset label_lin_advance:Linear advance label_filament_setting:Diametro filamento label_current_setting:Corrente driver (mA) label_bump_sensitivity:Sens.sensorless homing label_hybrid_threshold:Hybrid threshold label_stealth_chop:TMC StealthChop label_print_acceleration:Acc. in stampa label_retract_acceleration:Acc. retrazione label_travel_acceleration:Acc. spostamenti label_retract_length:Lunghezza retrazione label_retract_swap_length:Lunghezza retr. scambio label_retract_feedrate:Feedrate retrazione label_retract_z_lift:Alza Z in retrazione label_recover_length:Lung. di recupero extra label_swap_recover_length:Lung. di recupero scambio extra label_recover_feedrate:Feedrate recupero label_swap_recover_feedrate:Rec.feedrate di scambio label_mbl_offset:MBL Offset label_save:Salva label_restore:Ripristina label_reset:Reset label_eeprom_save_info:Salvo le impostazioni nella EEPROM? label_eeprom_restore_info:Ricarico le impostazioni dalla EEPROM? label_eeprom_reset_info:Resetto la EEPROM ai valori di fabbrica? label_settings_save:Salva impostazioni label_settings_restore:Ripristina impostazioni label_settings_reset:Resetta impostazioni label_settings_reset_info:Resettare tutte le impostazioni ai valori di default? label_settings_reset_done:Reset delle impostazioni avvenuto con successo.\nRiavviare la stampante prego. label_page_up:Pagina sù label_page_down:Pagina giù label_up:Sù label_down:Giù label_next:Prossimo label_back:Indietro label_inc:Incrementa label_dec:Decrementa label_load:Carica label_unload:Scarica label_on:Acceso label_off:Spento label_auto:AUTO label_smart:SMART label_slow:Lento label_normal:Normale label_fast:Veloce label_zero:Zero label_half:50% label_full:100% label_custom:Macro label_clear:Canc. label_default:Predefinito label_start:Inizia label_stop:Stop label_pause:Pausa label_resume:Riprendi label_init:Init label_disconnect:Scollega label_shut_down:Spegni label_force_shut_down:Forza spegnimento label_emergencystop:Emergenza label_preheat:Preriscalda label_preheat_both:Entrambi label_cooldown:Raffredda label_confirm:Conferma label_cancel:Annulla label_warning:Attenzione label_continue:Continua label_confirmation:Sei sicuro? label_status:Stato label_ready:Pronta label_busy:Stampante occupata, attendere... label_loading:Caricamento... label_unconnected:Stampante non connessa label_info:Info label_invalid_value:Valori forniti non validi! label_timeout_reached:Timeout raggiunto! label_disconnect_info:Puoi controllare la stampante dal PC! label_shutting_down:Spegnimento... label_wait_temp_shut_down:Attendere che la temperatura dell'hotend sia inferiore a %d℃ label_power_failed:Vuoi continuare la stampa? label_process_running:Processo in corso! Attendere il completamento label_process_completed:Processo completato! label_process_aborted:Processo annullato! label_tftsd:SD schermo label_read_tftsd_error:Errore lettura SD! label_tftsd_inserted:SD inserita label_tftsd_removed:SD rimossa label_u_disk:Pen drive label_read_u_disk_error:Errore lettura pen drive label_u_disk_inserted:Pen drive inserita! label_u_disk_removed:Pen drive rimossa! label_onboardsd:SD su SKR label_read_onboardsd_error:Errore lettura SD su SKR! label_filament_runout:Filamento finito! label_disable_steppers:Motori label_xy_unlock:Sblocca XY label_start_print:Inizio a stampare:\n%s? label_stop_print:Vuoi fermare la stampa? label_is_pause:Impossibile estrudere durante la stampa,\nvuoi interrompere? label_m0_pause:Messa in pausa da comando M0 label_test:Test label_deploy:Estrai label_stow:Ritrai label_repeat:Ripeti label_nozzle:Hotend label_bed:Piatto ris. label_chamber:Camera label_fan:Ventola label_bltouch:BLtouch label_touchmi:TouchMi label_1_degree:1° label_5_degree:5° label_10_degree:10° label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 sec. label_10_seconds:10 sec. label_30_seconds:30 sec. label_60_seconds:1 min. label_120_seconds:2 min. label_300_seconds:5 min. label_white:Bianco label_black:Nero label_blue:Blu label_red:Rosso label_green:Verde label_cyan:Ciano label_yellow:Giallo label_brown:Marrone label_gray:Grigio label_orange:Arancione label_indigo:Indaco label_violet:Viola label_magenta:Magenta label_purple:Viola label_lime:Lime label_darkblue:Blu Scuro label_darkgreen:Verde Scuro label_darkgray:Grigio Scuro label_heat:Riscalda label_move:Muovi label_home:Home label_print:Stampa label_extrude:Estrudi label_settings:Opzioni label_screen_settings:Schermo label_machine_settings:Stampante label_marlin_mode_settings:MarlinMode label_feature_settings:Configura label_sound:Suono label_rgb_settings:LED RGB label_rgb_off:Spegni label_terminal:Console label_leveling:Calibra label_point_1:Punto 1 label_point_2:Punto 2 label_point_3:Punto 3 label_point_4:Punto 4 label_point_5:Punto 5 label_bed_leveling:ABL label_bl_complete:Auto livellamento completato label_bl_smart_fill:Punti di rilevazione mancanti mesh ricostruita con funzione smart.\n\nNota: ricordati di salvare! label_bl_enable:ABL: on label_bl_disable:ABL: off label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh bed leveling label_abl_settings:Auto bed leveling label_abl_settings_bbl:ABL bilineare label_abl_settings_ubl:ABL unificato label_abl_settings_ubl_save:Salva nello slot label_abl_settings_ubl_load:Carica lo slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Ricordo lo slot per il prossimo riavvio? (Salva in EEPROM) label_abl_z:Z fade label_level_corner:L corner label_p_offset:P offset label_h_offset:H offset label_distance:Distanza label_load_unload:Carica/scarica label_load_unload_short:Scarica label_touchscreen_adjust:Calibra label_more:Altro label_screen_info:Info label_bg_color:Colore sfondo label_font_color:Colore font label_percentage:Percentuale label_percentage_speed:Velocità label_percentage_flow:Flusso label_babystep:Babystep label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Calibrazione touch screen label_adjust_info:Premi sui punti rossi label_adjust_ok:Regolazione completata! label_adjust_failed:Regolazione fallita. Riprova! label_unifiedmove:Movimento label_unifiedheat:Risc/vent label_touch_to_exit:Tocca ovunque per uscire label_mainmenu:Menù label_parameter_setting:Parametri label_eeprom_settings:EEPROM label_leveling_edge_distance:Distanza dal bordo label_tuning:Regola label_pid:PID label_pid_title:Autoregolazione PID label_pid_start_info:Partirà l'autoregolazione del PID. Può richiedere diversi minuti.\nContinuare? label_pid_start_info_2:Autoregolazione PID in corso! label_pid_start_info_3:NON TOCCARE lo schermo fino al completamento! label_tune_extruder:Step/mm E label_tune_ext_extrude_100:Estr. 100mm label_tune_ext_temp:Regolazione estr. | Scalda label_tune_ext_mark120mm:Fai un segno a 120mm sul filamento\nPremi '%s' quando sei pronto\nMisura la lunghezza mancante dopo l'estrusione label_tune_ext_heatoff:Spegnere l'hotend? label_tune_ext_adj_esteps:Regola step/mm E label_tune_ext_esteps_saved:Nuovi step/mm di E impostati!\nNon dimenticare di salvarli nellaEEPROM\nNuovo valore: %0.2f label_tune_ext_measured:Lunghezza mancante: label_tune_ext_old_estep:Vecchi step/mm E: %0.2f label_tune_ext_new_estep:Nuovi step/mm E: %0.2f label_connection_settings:Connessioni label_notifications:Notifiche label_mesh_editor:Mesh label_mesh_tuner:Correggi mesh label_case_light:Luce label_load_started:Carico filamento in corso...\nNon sono possibili altre azioni fino al termine. Attendere prego. label_unload_started:Scarico filamento in corso...\nNon sono possibili altre azioni fino al termine. Attendere prego. label_heaters_on:Alcuni riscaldatori sono ancora accesi\nVuoi spegnerli? label_print_finished: Stampa\n ultimata. label_main_screen:Principale label_previous_print_data:Ultimo lav. label_print_time:Durata stampa: %02u:%02u:%02u label_filament_length:\nLunghezza filamento: %1.2fm label_filament_weight:\nPeso filamento: %1.2fg label_filament_cost:\nCosto filamento: %1.2f label_no_filament_stats:\nNessuna statistica del filamento. label_click_for_more:Clicca per riepilogo label_ext_templow:La temperatura dell'hotend è al di sotto della temperatura minima (%d℃). label_heat_hotend:Scaldo l'hotend a %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Allinea Z label_macros:Macro label_mesh_valid:Validazione mesh label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_jp.ini ================================================ #### Language Code:JP ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:ポートレート label_language:日本語 label_rotate_ui:回転UI label_terminal_ack:端末でACKを表示する label_persistent_info:永続的なステータス情報 label_file_list_mode:ファイルビューアリストモード label_file_sort_by:Sort files by label_ack_notification:ACK notification style label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:フルスクリーンでマーリンモード label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:移動速度(X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:オートパワー label_fil_runout:フィラメントセンサ label_pl_recovery_en:Power loss recovery label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:Touch sounds label_toast_sound:Toast Notifications label_alert_sound:Popups and Alerts label_heater_sound:Heater notification label_knob_led_color:回転ノブLED label_knob_led_idle:Rotary Knob LED idle label_lcd_brightness:LCD明るさ label_lcd_idle_brightness:LCDの輝度が薄暗い label_lcd_idle_delay:LCD調光アイドルタイマー label_start_gcode_enabled:印刷前にGコードを開始する label_end_gcode_enabled:印刷後にGコードを終了する label_cancel_gcode_enabled:Gコードをキャンセルする label_steps_setting:MMあたりのステップ label_maxfeedrate:マックスフィード率 label_maxacceleration:最大加速度 label_acceleration:加速度 label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2nd Nozzle label_probe_offset:プローブオフセット label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:ドライバー電流 (mA) label_bump_sensitivity:TMC バンプ感度 label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:印刷加速度 label_retract_acceleration:引き戻し加速度 label_travel_acceleration:空振り加速度 label_retract_length:引き戻し長さ label_retract_swap_length:交換時の引き戻し長さ label_retract_feedrate:引き戻し速度 label_retract_z_lift:引き戻し時のz軸上げの高さ label_recover_length:余分な押し出し長さ label_swap_recover_length:交換時の余分な押し出し長さ label_recover_feedrate:押出速度 label_swap_recover_feedrate:交換時の押出速度 label_mbl_offset:MBL Offset label_save:保存 label_restore:Restore label_reset:リセット label_eeprom_save_info:プリンタの設定をEEPROMに保存しますか? label_eeprom_restore_info:EEPROMから設定を再読み込み? label_eeprom_reset_info:Reset EEPROM to stock printer settings? label_settings_save:Save settings label_settings_restore:設定を復元する label_settings_reset:設定をリセットする label_settings_reset_info:すべての設定をデフォルト値にリセットしますか? label_settings_reset_done:すべての設定が正常にリセットされました。デバイスを再起動してください。 label_page_up:前ページ label_page_down:次ページ label_up:Up label_down:Down label_next:Next label_back:戻る label_inc:増え label_dec:減る label_load:増え label_unload:減る label_on:ON label_off:OFF label_auto:AUTO label_smart:スマート label_slow:ゆっくり label_normal:正常速度 label_fast:早め label_zero:ゼロ label_half:50%速さ label_full:全速 label_custom:カスタム label_clear:Clear label_default:Default label_start:Start label_stop:停止 label_pause:一時停止 label_resume:続ける label_init:Init label_disconnect:データ接続 label_shut_down:シャットダウン label_force_shut_down:フォース label_emergencystop:EM.停止 label_preheat:予熱する label_preheat_both:両方 label_cooldown:クールダウン label_confirm:OK label_cancel:キャンセル label_warning:注意 label_continue:継続 label_confirmation:Are you sure? label_status:状態 label_ready:準備中 label_busy:ビジー状態、しばらくお待ちください... label_loading:ロッド中... label_unconnected:プリンターに連続していない! label_info:情報 label_invalid_value:Invalid value(s) label_timeout_reached:Timeout reached! label_disconnect_info:SDカード　PC両用 label_shutting_down:シャットダウン... label_wait_temp_shut_down:ホットエンドの温度が%d℃未満になるまで待ちます。 label_power_failed:プリントを継続しますか? label_process_running:Process already running! label_process_completed:Process completed! label_process_aborted:Process aborted! label_tftsd:TFT SD label_read_tftsd_error:TFT SDカードの読み取りがエラー発生しました! label_tftsd_inserted:SDカード入りました! label_tftsd_removed:SDカード出しました! label_u_disk:USBメモリー label_read_u_disk_error:USBメモリー読み込みエラー! label_u_disk_inserted:U Diskカード入りました! label_u_disk_removed:U Diskカード出しました! label_onboardsd:内部 mSDカード label_read_onboardsd_error:内部 mSDカードの読み取りがエラー発生しました! label_filament_runout:フィラメントランアウト! label_disable_steppers:Disarm All label_xy_unlock:Disarm XY label_start_print:印刷を開始する:\n%s? label_stop_print:プリントを中止しますか? label_is_pause:印刷時に押し出すことができない。印刷を中止しますか？ label_m0_pause:MOコマンドで一時停止 label_test:テスト label_deploy:展開 label_stow:収納 label_repeat:繰り返す label_nozzle:ノズル label_bed:ベッド label_chamber:Chamber label_fan:ファン label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Sec. label_10_seconds:10 Sec. label_30_seconds:30 Sec. label_60_seconds:1 Min. label_120_seconds:2 Min. label_300_seconds:5 Min. label_white:白色 label_black:黒色 label_blue:青色 label_red:赤色 label_green:緑色 label_cyan:シアン label_yellow:黄色 label_brown:茶色 label_gray:灰色 label_orange:オレンジ label_indigo:インディゴ label_violet:バイオレット label_magenta:赤紫色 label_purple:紫 label_lime:ライム label_darkblue:濃紺 label_darkgreen:ダークグリーン label_darkgray:暗灰色 label_heat:あたため label_move:移動 label_home:ゼロにする label_print:プリント label_extrude:押出 label_settings:設定 label_screen_settings:画面 label_machine_settings:マシン label_marlin_mode_settings:MarlinMode label_feature_settings:機能 label_sound:Sound label_rgb_settings:LED カラー label_rgb_off:LED オフ label_terminal:端末 label_leveling:レベリング label_point_1:ポイント1 label_point_2:ポイント2 label_point_3:ポイント3 label_point_4:ポイント4 label_point_5:ポイント5 label_bed_leveling:Bed Level label_bl_complete:Bed Leveling Complete label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save! label_bl_enable:BL: on label_bl_disable:BL: off label_abl:自動調整 label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Save to slot label_abl_settings_ubl_load:Load from slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot? label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P Offset label_h_offset:H Offset label_distance:Distance label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:校正する label_more:詳細 label_screen_info:ついて label_bg_color:背景色 label_font_color:フォントの色 label_percentage:パーセント label_percentage_speed:スビード label_percentage_flow:押出 label_babystep:ベビーステップ label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:タッチスクリーン較正 label_adjust_info:赤星をタッチ label_adjust_ok:校正が成功しました label_adjust_failed:校正が失敗しました、も一度お試して下さい label_unifiedmove:移動 label_unifiedheat:ヒート&ファン label_touch_to_exit:クリックして終了します label_mainmenu:メニュー label_parameter_setting:パラメータ label_eeprom_settings:EEPROM label_leveling_edge_distance:Bed edge distance label_tuning:Tuning label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune may take some time to complete.\nContinue? label_pid_start_info_2:PID autotune in progress! label_pid_start_info_3:Do not touch the screen until completed (green LED ON)! label_tune_extruder:Tune steps label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:Connection label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_pl.ini ================================================ #### Language Code:PL ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:BaudRate label_language:Polski label_rotate_ui:Obrót label_terminal_ack:Show ACK in Terminal label_persistent_info:Persistent Status Info label_file_list_mode:Files viewer List Mode label_file_sort_by:Sort files by label_ack_notification:ACK notification style label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:Marlin mode in fullscreen label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:Move speed(X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:Auto Power label_fil_runout:Filament sensor label_pl_recovery_en:Power loss recovery label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:Touch sounds label_toast_sound:Toast Notifications label_alert_sound:Popups and Alerts label_heater_sound:Heater notification label_knob_led_color:Rotary Knob LED label_knob_led_idle:Rotary Knob LED idle label_lcd_brightness:Brightness label_lcd_idle_brightness:Idle brightness label_lcd_idle_delay:Idle timeout label_start_gcode_enabled:Start Gcode before print label_end_gcode_enabled:End Gcode after print label_cancel_gcode_enabled:Cancel Gcode label_steps_setting:Steps per mm label_maxfeedrate:Max Feed Rate label_maxacceleration:Max Acceleration label_acceleration:Acceleration label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2nd Nozzle label_probe_offset:Przesunięcie label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:Driver Current (mA) label_bump_sensitivity:TMC bump sensitivity label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:Print Acceleration label_retract_acceleration:Retract Acceleration label_travel_acceleration:Travel Acceleration label_retract_length:Retract length label_retract_swap_length:Retract swap length label_retract_feedrate:Retract feedrate label_retract_z_lift:Z lift on retraction label_recover_length:Extra recover length label_swap_recover_length:Extra recover swap length label_recover_feedrate:Recover feedrate label_swap_recover_feedrate:Swap recover feedrate label_mbl_offset:MBL Offset label_save:Zapisz label_restore:Restore label_reset:Reset label_eeprom_save_info:Save printer settings to EEPROM? label_eeprom_restore_info:Reload settings from EEPROM? label_eeprom_reset_info:Reset EEPROM to stock printer settings? label_settings_save:Save settings label_settings_restore:Restore settings label_settings_reset:Reset default settings label_settings_reset_info:Reset all settings to default values? label_settings_reset_done:Reset all settings successful.\nPlease restart the device. label_page_up:Dalej label_page_down:Wstecz label_up:Up label_down:Down label_next:Next label_back:Powrót label_inc:Więcej label_dec:Mniej label_load:Load label_unload:Unload label_on:ON label_off:OFF label_auto:AUTO label_smart:SMART label_slow:Wolno label_normal:Normalnie label_fast:Szybko label_zero:Zero label_half:Połowa label_full:Max label_custom:Własne label_clear:Clear label_default:Default label_start:Start label_stop:Stop label_pause:Wstrzymaj label_resume:Wznów label_init:Init label_disconnect:Odłącz label_shut_down:Wyłącz label_force_shut_down:Wymuś label_emergencystop:ZATRZYMAJ label_preheat:Rozgrzew. label_preheat_both:Wszystko label_cooldown:Chłodzenie label_confirm:Potwierdź label_cancel:Anuluj label_warning:Uwaga label_continue:Kontynuuj label_confirmation:Are you sure? label_status:Status label_ready:Gotowy label_busy:Trwa przetwarzanie, proszę czekać... label_loading:Loading... label_unconnected:Drukarka nie podłączona! label_info:Info label_invalid_value:Invalid value(s) label_timeout_reached:Timeout reached! label_disconnect_info:Teraz możesz kontrolować drukarkę z komputera! label_shutting_down:Wyłączanie... label_wait_temp_shut_down:Czekam na schłodzenie do %d℃ label_power_failed:Kontynuować drukowanie? label_process_running:Process already running! label_process_completed:Process completed! label_process_aborted:Process aborted! label_tftsd:SD TFT label_read_tftsd_error:Błąd odczytu karty SD wyświetlacza! label_tftsd_inserted:Karta włożona! label_tftsd_removed:Karta wyjęta! label_u_disk:U Disk label_read_u_disk_error:Błąd odczytu U Disk! label_u_disk_inserted:U Disk włożony! label_u_disk_removed:U Disk wyjęty! label_onboardsd:SD płyta label_read_onboardsd_error:Błąd odczytu karty SD na płycie! label_filament_runout:brak filamentu! label_disable_steppers:Disarm All label_xy_unlock:Odblokuj XY label_start_print:Start Printing:\n%s? label_stop_print:Zatrzymać drukowanie? label_is_pause:Operacja niedostępna w trakcie drukowania,\nwstrzymać drukowanie? label_m0_pause:Paused by M0 command label_test:Test label_deploy:Wysuń label_stow:Schowaj label_repeat:Powtórz label_nozzle:Głowica label_bed:Stół label_chamber:Chamber label_fan:Wentylator label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Sec. label_10_seconds:10 Sec. label_30_seconds:30 Sec. label_60_seconds:1 Min. label_120_seconds:2 Min. label_300_seconds:5 Min. label_white:Biały label_black:Czarny label_blue:Niebieski label_red:Czerwony label_green:Zielony label_cyan:Turkusowy label_yellow:Żółty label_brown:Brązowy label_gray:Szary label_orange:Orange label_indigo:Indigo label_violet:Violet label_magenta:Magenta label_purple:Purple label_lime:Lime label_darkblue:DarkBlue label_darkgreen:DarkGreen label_darkgray:DarkGray label_heat:Temp. label_move:Ruch label_home:Powrót label_print:Druk label_extrude:Extrude label_settings:Ustawienia label_screen_settings:Ekran label_machine_settings:Drukarka label_marlin_mode_settings:MarlinMode label_feature_settings:Opcje label_sound:Sound label_rgb_settings:Kolor LED label_rgb_off:Wyłącz LED label_terminal:Terminal label_leveling:Poziomowanie label_point_1:Punkt 1 label_point_2:Punkt 2 label_point_3:Punkt 3 label_point_4:Punkt 4 label_point_5:Punkt 5 label_bed_leveling:Bed Level label_bl_complete:Bed Leveling Complete label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save! label_bl_enable:BL: on label_bl_disable:BL: off label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Save to slot label_abl_settings_ubl_load:Load from slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot? label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P Offset label_h_offset:H Offset label_distance:Distance label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:Kalibracja label_more:Więcej label_screen_info:Info label_bg_color:Background color label_font_color:Font color label_percentage:Procent label_percentage_speed:Prędkość label_percentage_flow:Flow label_babystep:BabyStep label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Kalibracja ekranu dotykowego label_adjust_info:Dotykaj czerwoną kropkę label_adjust_ok:Kalibracja poprawna label_adjust_failed:Kalibracja niepoprawna, spróbuj ponownie label_unifiedmove:Ruch label_unifiedheat:Temperatura label_touch_to_exit:Dotkij aby wyjść label_mainmenu:Menu label_parameter_setting:Parametr label_eeprom_settings:EEPROM label_leveling_edge_distance:Bed edge distance label_tuning:Tuning label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune may take some time to complete.\nContinue? label_pid_start_info_2:PID autotune in progress! label_pid_start_info_3:Do not touch the screen until completed (green LED ON)! label_tune_extruder:Tune steps label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:Connection label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_pt.ini ================================================ #### Language Code:PT ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:BaudRate label_language:Portugues label_rotate_ui:Rodar label_terminal_ack:Show ACK in Terminal label_persistent_info:Persistent Status Info label_file_list_mode:Files viewer List Mode label_file_sort_by:Sort files by label_ack_notification:ACK notification style label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:Marlin mode in fullscreen label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:Move speed(X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:Auto Power label_fil_runout:Filament sensor label_pl_recovery_en:Power loss recovery label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:Touch sounds label_toast_sound:Toast Notifications label_alert_sound:Popups and Alerts label_heater_sound:Heater notification label_knob_led_color:Rotary Knob LED label_knob_led_idle:Rotary Knob LED idle label_lcd_brightness:Brightness label_lcd_idle_brightness:Idle brightness label_lcd_idle_delay:Idle timeout label_start_gcode_enabled:Start Gcode before print label_end_gcode_enabled:End Gcode after print label_cancel_gcode_enabled:Cancel Gcode label_steps_setting:Steps per mm label_maxfeedrate:Max Feed Rate label_maxacceleration:Max Acceleration label_acceleration:Acceleration label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2nd Nozzle label_probe_offset:Probe Offset label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:Driver Current (mA) label_bump_sensitivity:TMC bump sensitivity label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:Print Acceleration label_retract_acceleration:Retract Acceleration label_travel_acceleration:Travel Acceleration label_retract_length:Retract length label_retract_swap_length:Retract swap length label_retract_feedrate:Retract feedrate label_retract_z_lift:Z lift on retraction label_recover_length:Extra recover length label_swap_recover_length:Extra recover swap length label_recover_feedrate:Recover feedrate label_swap_recover_feedrate:Swap recover feedrate label_mbl_offset:MBL Offset label_save:Gravar label_restore:Restore label_reset:Reset label_eeprom_save_info:Save printer settings to EEPROM? label_eeprom_restore_info:Reload settings from EEPROM? label_eeprom_reset_info:Reset EEPROM to stock printer settings? label_settings_save:Save settings label_settings_restore:Restore settings label_settings_reset:Reset default settings label_settings_reset_info:Reset all settings to default values? label_settings_reset_done:Reset all settings successful.\nPlease restart the device. label_page_up:Subir pagina label_page_down:Pagina abaixo label_up:Up label_down:Down label_next:Next label_back:Voltar label_inc:Aumentar label_dec:Diminuir label_load:Carregar label_unload:Descarregar label_on:ON label_off:OFF label_auto:AUTO label_smart:SMART label_slow:Lento label_normal:Normal label_fast:Rapido label_zero:Zero label_half:Half label_full:Full label_custom:Custom label_clear:Clear label_default:Default label_start:Start label_stop:Parar label_pause:Pausar label_resume:Resumir label_init:Init label_disconnect:Desconectar label_shut_down:Desligar label_force_shut_down:Force label_emergencystop:EMERGENCIA STOP label_preheat:Aquecer label_preheat_both:Ambos label_cooldown:Arrefecer label_confirm:Confirme label_cancel:Cancelar label_warning:Aviso label_continue:Continuar label_confirmation:Are you sure? label_status:Status label_ready:Pronto label_busy:Em processamento, aguarde... label_loading:Carregando... label_unconnected:Nenhuma impressora conectada! label_info:Info label_invalid_value:Invalid value(s) label_timeout_reached:Timeout reached! label_disconnect_info:Agora podes controlar a impressora com o computador! label_shutting_down:Shutting down... label_wait_temp_shut_down:Wait for the hotend temperature to be lower than %d ℃ label_power_failed:Continuar a imprimir? label_process_running:Process already running! label_process_completed:Process completed! label_process_aborted:Process aborted! label_tftsd:TFT SD label_read_tftsd_error:Erro a ler TFT SD! label_tftsd_inserted:Cartao inserido! label_tftsd_removed:Cartao removido! label_u_disk:U Disk label_read_u_disk_error:Erro a ler U Disk! label_u_disk_inserted:U Disk inserido! label_u_disk_removed:U Disk removido! label_onboardsd:OnboardSD label_read_onboardsd_error:Erro a ler Onboard SD card! label_filament_runout:Filamento runout! label_disable_steppers:Disarm All label_xy_unlock:Desbloquear XY label_start_print:Start Printing:\n%s? label_stop_print:Parar de imprimir? label_is_pause:Nao e possível a extrusão durante a impressao,\npausar a impressao? label_m0_pause:Paused by M0 command label_test:Testar label_deploy:Abrir label_stow:Encolher label_repeat:Repetir label_nozzle:Nozzle label_bed:Hotbed label_chamber:Chamber label_fan:Ventoinha label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 Sec. label_10_seconds:10 Sec. label_30_seconds:30 Sec. label_60_seconds:1 Min. label_120_seconds:2 Min. label_300_seconds:5 Min. label_white:Branco label_black:Preto label_blue:Azul label_red:Vermelho label_green:Verde label_cyan:Turquesa label_yellow:Amarelo label_brown:Castanho label_gray:Cinzento label_orange:Orange label_indigo:Indigo label_violet:Violet label_magenta:Magenta label_purple:Purple label_lime:Lime label_darkblue:DarkBlue label_darkgreen:DarkGreen label_darkgray:DarkGray label_heat:Aquecer label_move:Mover label_home:Inicio label_print:Imprimir label_extrude:Extrudir label_settings:Configurar label_screen_settings:Ecra label_machine_settings:Impressora label_marlin_mode_settings:MarlinMode label_feature_settings:Extras label_sound:Sound label_rgb_settings:LED cor label_rgb_off:Desligar label_terminal:Terminal label_leveling:Nivelar label_point_1:Ponto 1 label_point_2:Ponto 2 label_point_3:Ponto 3 label_point_4:Ponto 4 label_point_5:Ponto 5 label_bed_leveling:Bed Level label_bl_complete:Bed Leveling Complete label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save! label_bl_enable:BL: on label_bl_disable:BL: off label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Save to slot label_abl_settings_ubl_load:Load from slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot? label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P Offset label_h_offset:H Offset label_distance:Distance label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:Ajustar label_more:Mais label_screen_info:Info label_bg_color:Background color label_font_color:Font color label_percentage:Percentagem label_percentage_speed:Rapidez label_percentage_flow:Fluxo label_babystep:BabyStep label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Calibracao do Touch Screen label_adjust_info:Por favor, clique no ponto vermelho label_adjust_ok:Ajustado com sucesso label_adjust_failed:Ajuste falhou, tente novamente label_unifiedmove:Movimento label_unifiedheat:Heat/Fan label_touch_to_exit:Toque em qualquer lugar para sair label_mainmenu:Menu label_parameter_setting:Parâmetro label_eeprom_settings:EEPROM label_leveling_edge_distance:Bed edge distance label_tuning:Tuning label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune may take some time to complete.\nContinue? label_pid_start_info_2:PID autotune in progress! label_pid_start_info_3:Do not touch the screen until completed (green LED ON)! label_tune_extruder:Tune steps label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:Connection label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_ru.ini ================================================ #### Language Code:RU ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:Скорость label_language:Русский label_rotate_ui:Переворот label_terminal_ack:ACK терминала (C°) label_persistent_info:Нагрев в инфостроке label_file_list_mode:Файлы в режиме строк label_file_sort_by:Сортировать по label_ack_notification:ACK стиль уведомления label_emulate_m600:Эмуляция M600 label_serial_always_on:Серийный порт Всегда ВКЛЮЧЕН label_marlin_fullscreen:Marlin на весь экран label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin тип режима label_move_speed:Скорость (X Y Z) label_auto_load_leveling:Автоматическая Загрузка Сетки label_fan_speed_percent:Скорость вентилятора в процентах label_xy_offset_probing:XY Офсет Датчика label_z_steppers_alignment:Z Автоматическое выравнивание label_ps_on:Автовыключение label_fil_runout:Сенсор прутка label_pl_recovery_en:Работа после потери питания label_pl_recovery_home:Работа после потери питания с парковкой label_btt_mini_ups:Поддержка BTT UPS label_touch_sound:Звуки нажатий label_toast_sound:Звуки инфостроки label_alert_sound:Предупреждения label_heater_sound:Уведомление о нагревателе label_knob_led_color:Подсветка энкодера label_knob_led_idle:Простой подсветки энкодера label_lcd_brightness:Яркость label_lcd_idle_brightness:Регулировка яркости LCD label_lcd_idle_delay:Время до гашения LCD label_start_gcode_enabled:G-код перед печатью label_end_gcode_enabled:G-код после печати label_cancel_gcode_enabled:G-код отмены печати label_steps_setting:Настройка шагов на мм label_maxfeedrate:MAX скорость подачи label_maxacceleration:MAX ускорение label_acceleration:Ускорение label_jerk:Рывок label_junction_deviation:Отклонение узла label_home_offset:Дом - отступы label_fwretract:M207 ретракт label_fwrecover:M208 восстановление ретракта label_retract_auto:Авто FW ретракт label_hotend_offset:Смещение 2-го сопла label_probe_offset:Смещение датчика label_lin_advance:К-фактор label_filament_setting:Диаметр прутка label_current_setting:Настройка TMC драйверов label_bump_sensitivity:TMC чувствительность удара label_hybrid_threshold:TMC гибридный порог label_stealth_chop:TMC StealthChop label_print_acceleration:Печати label_retract_acceleration:Ретракта label_travel_acceleration:Перемещения label_retract_length:Длина label_retract_swap_length:Длина при смене сопла label_retract_feedrate:Скорость label_retract_z_lift:Подъём по Z label_recover_length:Длина label_swap_recover_length:Длина при смене сопла label_recover_feedrate:Скорость label_swap_recover_feedrate:Скорость при смене сопла label_mbl_offset:MBL Смещение label_save:Сохранить label_restore:Вернуть label_reset:Сброс label_eeprom_save_info:Сохранить настройки принтера в EEPROM? label_eeprom_restore_info:Загрузить настройки из EEPROM? label_eeprom_reset_info:Сбрость EEPROM настройки принтера на начальные? label_settings_save:Сохранить настройки label_settings_restore:Восстановить настройки label_settings_reset:Сбросить настройки label_settings_reset_info:Все настройки будут сброшены по умолчанию.\nПродолжить? label_settings_reset_done:Успешный сброс настроек экрана. Для полного вступления в силу,\nперегрузите устройство. label_page_up:<--- label_page_down:---> label_up:Вверх label_down:Вниз label_next:Следующий label_back:Назад label_inc:Увеличить label_dec:Уменьшить label_load:Загрузка label_unload:Выгрузка label_on:Вкл label_off:Выкл label_auto:AUTO label_smart:Умный label_slow:Медленно label_normal:Обычно label_fast:Быстро label_zero:Обнулить label_half:50% label_full:Максимум label_custom:Своё меню label_clear:Убрать label_default:По умолчанию label_start:Начать label_stop:Стоп label_pause:Пауза label_resume:Продолжить label_init:Инициализация label_disconnect:Отключить label_shut_down:Выключить label_force_shut_down:Принудительно выкл label_emergencystop:Экст.стоп label_preheat:Преднагрев label_preheat_both:Оба label_cooldown:Охладить label_confirm:OK label_cancel:Отмена label_warning:Внимание label_continue:Продолжение label_confirmation:Вы уверены? label_status:Статус label_ready:Готов label_busy:В процессе, ждите... label_loading:Загрузка... label_unconnected:Нет подключения! label_info:Информация label_invalid_value:Остутствуют правильные значения! label_timeout_reached:Время истекло! label_disconnect_info:Управление принтером через компьютер label_shutting_down:Выключаю... label_wait_temp_shut_down:Дождитесь температуры сопла не ниже чем %d℃ label_power_failed:Продолжить печать? label_process_running:Идёт процесс! label_process_completed:Процесс завершён! label_process_aborted:Процесс прерван! label_tftsd:SD экрана label_read_tftsd_error:Ошибка чтения SD карты! label_tftsd_inserted:SD карта вставлена! label_tftsd_removed:SD карта извлечена! label_u_disk:Флеш карта label_read_u_disk_error:Ошибка чтения флеш карты! label_u_disk_inserted:Флеш карта вставлена! label_u_disk_removed:Флеш карта извлечена! label_onboardsd:SD платы label_read_onboardsd_error:Ошибка чтения SD карты! label_filament_runout:Пруток закончился label_disable_steppers:Двигатели label_xy_unlock:Моторы выкл label_start_print:Начать печать:\n%s? label_stop_print:Остановить печать? label_is_pause:Невозможна экструзия при печати, поставить\nна паузу? label_m0_pause:Пауза по команде M0 label_test:BLT тест label_deploy:BLT вниз label_stow:BLT вверх label_repeat:Точность Z label_nozzle:Сопло label_bed:Стол label_chamber:Камера label_fan:Вентилятор label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01мм label_01_mm:0.1мм label_1_mm:1мм label_5_mm:5мм label_10_mm:10мм label_100_mm:100мм label_200_mm:200мм label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 сек. label_10_seconds:10 сек. label_30_seconds:30 сек. label_60_seconds:1 мин. label_120_seconds:2 мин. label_300_seconds:5 мин. label_white:Белый label_black:Чёрный label_blue:Синий label_red:Красный label_green:Зелёный label_cyan:Голубой label_yellow:Жёлтый label_brown:Коричневый label_gray:Серый label_orange:Оранжевый label_indigo:Индиго label_violet:Фиолетовый label_magenta:Маджента label_purple:Пурпурный label_lime:Лаймовый label_darkblue:Тёмно-синий label_darkgreen:Тёмно-зелёный label_darkgray:Тёмно-серый label_heat:Нагрев label_move:Движение label_home:Домой label_print:Печать label_extrude:Экструзия label_settings:Настройки label_screen_settings:Экран label_machine_settings:Принтер label_marlin_mode_settings:MarlinMode label_feature_settings:Опции label_sound:Звуки label_rgb_settings:Цвет LED label_rgb_off:LED выкл label_terminal:Терминал label_leveling:Стол вруч. label_point_1:Точка 1 label_point_2:Точка 2 label_point_3:Точка 3 label_point_4:Точка 4 label_point_5:Точка 5 label_bed_leveling:Стол равнен. label_bl_complete:Выравнивание стола окончено label_bl_smart_fill:Отсутствующие точки замера были атоматически заполнены.\nЗапомните для сохраниения! label_bl_enable:BL: вкл label_bl_disable:BL: выкл label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Равнение по сетке label_abl_settings:Автовыравнивание label_abl_settings_bbl:Билинейная калибровка label_abl_settings_ubl:Универсальная калибровка label_abl_settings_ubl_save:Сохранить в ячейку label_abl_settings_ubl_load:Загрузить из ячейки label_abl_slot0:Ячейка 0 label_abl_slot1:Ячейка 1 label_abl_slot2:Ячейка 2 label_abl_slot3:Ячейка 3 label_abl_slot_eeprom:Восстановить из ячейки при перезагрузке?\n(Сохранить в EEPROM) label_abl_z:Z затухание label_level_corner:Прямой угол label_p_offset:Отступ P label_h_offset:Отступ H label_distance:Отступы label_load_unload:Загрузить/Выгрузить label_load_unload_short:За/Выгрузка label_touchscreen_adjust:Калибровка label_more:Больше label_screen_info:Инфо label_bg_color:Фоновый цвет label_font_color:Цвет шрифта label_percentage:Подстройки label_percentage_speed:Скорость label_percentage_flow:Поток label_babystep:Микрошаг Z label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Калибровка экрана label_adjust_info:Нажмите на красную точку label_adjust_ok:Успешная калибровка label_adjust_failed:Неудачная калибровка, попробуйте снова label_unifiedmove:Движение label_unifiedheat:Нагрев label_touch_to_exit:Нажмите для возврата label_mainmenu:Меню label_parameter_setting:Параметры label_eeprom_settings:EEPROM label_leveling_edge_distance:Отступы от краёв стола label_tuning:Наладка label_pid:PID label_pid_title:PID автонастройка label_pid_start_info:Сейчас будет запущена PID автонастройка, это займёт некоторое время. Продолжить? label_pid_start_info_2:Автонастройка PID в работе! label_pid_start_info_3:Не трогайте экран до окончания настройки (загориться зелёным LED)! label_tune_extruder:Настройка шагов label_tune_ext_extrude_100:100мм экст. label_tune_ext_temp:Настройка экструдера/Нагрев label_tune_ext_mark120mm:Отметьте 120 мм на прутке\nНажмите '%s' по говности\nИзмерьте полученную длину/nпосле экструдирования label_tune_ext_heatoff:Отключить нагрев? label_tune_ext_adj_esteps:Подстройка E-шагов label_tune_ext_esteps_saved:E-шаги установлены!\nНе забудьте сохранить их в EEPROM\nНовое значение: %0.2f label_tune_ext_measured:Оставшаяся длина: label_tune_ext_old_estep:Старые E-шаги: %0.2f label_tune_ext_new_estep:Новые E-шаги: %0.2f label_connection_settings:Соединение label_notifications:Уведомления label_mesh_editor:Сетка ред. label_mesh_tuner:Сетка настр. label_case_light:Подсветка label_load_started:Загрузка прутка начата.\nДождитесь пока сопло достигнет необходимой температуры.\nПожалуйста подождите. label_unload_started:Выгрузка прутка начата.\nДождитесь пока сопло достигнет необходимой температуры.\nПожалуйста подождите. label_heaters_on:Некоторые нагреватели все еще работают.\nХотите прервать нагрев? label_print_finished: Печать\n закончена label_main_screen:Главный label_previous_print_data:Краткий label_print_time:Время печати: %02u:%02u:%02u label_filament_length:\nДлина прутка: %1.2fm label_filament_weight:\nВес прутка: %1.2fg label_filament_cost:\nЦена прутка: %1.2f label_no_filament_stats:\nДанные о прутке отсутствуют. label_click_for_more:Нажмите для получения сводки label_ext_templow:Температура сопла ниже минимальной (%d℃). label_heat_hotend:Нагреть сопло до %d℃? label_desired_templow:Температура сопла низка\nжелательная температура (%d℃). label_wait_heat_up:Подождите, пока он нагреется. label_nozzle_stabilizing:Подождите, сопло стабилизируется... label_z_align:Z Выравнивание label_macros:Макросы label_mesh_valid:Проверка сетки label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_sk.ini ================================================ #### Language Code:SK ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:BaudRate label_language:Slovensky label_rotate_ui:Otočiť label_terminal_ack:Show ACK in Terminal label_persistent_info:Trvalé info o stave label_file_list_mode:Zobraziť súbory ako zoznam label_file_sort_by:Sort files by label_ack_notification:ACK notification style label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:Marlin mode in fullscreen label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:Rýchlosť pohybu XYZ label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:Auto vyp. label_fil_runout:Filament senzor label_pl_recovery_en:Power loss recovery label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:Touch sounds label_toast_sound:Toast Notifications label_alert_sound:Popups and Alerts label_heater_sound:Heater notification label_knob_led_color:LED otočného tlačidla label_knob_led_idle:Rotary Knob LED idle label_lcd_brightness:Jas LCD label_lcd_idle_brightness:Zníženie jasu LCD label_lcd_idle_delay:Zníženie jasu LCD po label_start_gcode_enabled:Začiatočný Gcode label_end_gcode_enabled:Koncový Gcode label_cancel_gcode_enabled:Cancel Gcode label_steps_setting:Počet krokov na MM label_maxfeedrate:Max Feed Rate label_maxacceleration:Maximálna akcelerácia label_acceleration:Akcelerácia label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2nd Nozzle label_probe_offset:Probe Offset label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:Prúd ovládača (mA) label_bump_sensitivity:TMC bump citlivosť label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:Akcelerácia pri tlači label_retract_acceleration:Akcelerácia retrakcie label_travel_acceleration:Akcelerácia presunu label_retract_length:Retract length label_retract_swap_length:Retract swap length label_retract_feedrate:Retract feedrate label_retract_z_lift:Z lift on retraction label_recover_length:Extra recover length label_swap_recover_length:Extra recover swap length label_recover_feedrate:Recover feedrate label_swap_recover_feedrate:Swap recover feedrate label_mbl_offset:MBL Offset label_save:Uložiť label_restore:Restore label_reset:Reset label_eeprom_save_info:Save printer settings to EEPROM? label_eeprom_restore_info:Reload settings from EEPROM? label_eeprom_reset_info:Reset EEPROM to stock printer settings? label_settings_save:Save settings label_settings_restore:Restore settings label_settings_reset:Reset default settings label_settings_reset_info:Resetovať všetky nastavenia. label_settings_reset_done:Reset všetkých nastavení vykonaný. Pre správne fungovanie, prosím,\nreštartovať zariadenie. label_page_up:Ďalej label_page_down:Naspäť label_up:Up label_down:Down label_next:Next label_back:Naspäť label_inc:Pridať label_dec:Ubrať label_load:Zaviesť label_unload:Vysunúť label_on:ZAP label_off:VYP label_auto:AUTO label_smart:SMART label_slow:Pomaly label_normal:Normálne label_fast:Rýchlo label_zero:Vypnúť label_half:Polovičná label_full:Naplno label_custom:Vlastné label_clear:Clear label_default:Default label_start:Start label_stop:Stop label_pause:Pauza label_resume:Pokračovať label_init:Init label_disconnect:Odpojiť label_shut_down:Vypnúť label_force_shut_down:Vynútené vypnutie label_emergencystop:STOP label_preheat:Nahriať label_preheat_both:Tryska/Podložka label_cooldown:Ochladiť label_confirm:Potvrdiť label_cancel:Zrušiť label_warning:Varovanie label_continue:Pokračovať label_confirmation:Are you sure? label_status:Status label_ready:Pripravená label_busy:Počkajte prosím... label_loading:Načítavam... label_unconnected:Tlačiareň odpojená! label_info:Info label_invalid_value:Invalid value(s) label_timeout_reached:Timeout reached! label_disconnect_info:Teraz môžete tlačiareň ovládať z počítača! label_shutting_down:Vypínanie... label_wait_temp_shut_down:Počkať na teplotu trysky menej ako %d℃ label_power_failed:Pokračovať v tlači? label_process_running:Process already running! label_process_completed:Process completed! label_process_aborted:Process aborted! label_tftsd:TFT SD label_read_tftsd_error:Chyba pri načítaní SD karty! label_tftsd_inserted:SD karta vložená! label_tftsd_removed:SD karta odstránená! label_u_disk:USB kľúč label_read_u_disk_error:Chyba pri načítaní USB kľúča! label_u_disk_inserted:USB kľúč vložený! label_u_disk_removed:USB disk odstránený! label_onboardsd:SD karta na doske label_read_onboardsd_error:Chyba pri načítaní SD karty na doske! label_filament_runout:Chýba filament! label_disable_steppers:Disarm All label_xy_unlock:Odomknite XY label_start_print:Start Printing:\n%s? label_stop_print:Zastaviť tlač? label_is_pause:Nemožno extrudovať počas tlače,\npozastaviť tlač? label_m0_pause:Pauza príkazom M0 label_test:Test label_deploy:Vystrčiť label_stow:Stiahnuť label_repeat:Opakovať label_nozzle:Tryska label_bed:Podložka label_chamber:Chamber label_fan:Ofuk label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 sek. label_10_seconds:10 sek. label_30_seconds:30 Sec. label_60_seconds:1 Min. label_120_seconds:2 Min. label_300_seconds:5 Min. label_white:Biela label_black:Čierna label_blue:Modrá label_red:Červená label_green:Zelená label_cyan:Tyrkysová label_yellow:Žltá label_brown:Hnedá label_gray:Šedá label_orange:Oranžová label_indigo:Indigo label_violet:Fialová label_magenta:Magenta label_purple:Purple label_lime:Lime label_darkblue:DarkBlue label_darkgreen:DarkGreen label_darkgray:DarkGray label_heat:Teplota label_move:Posunúť label_home:Domov label_print:Tlačiť label_extrude:Extrúder label_settings:Nastavenia label_screen_settings:Obrazovka label_machine_settings:Tlačiareň label_marlin_mode_settings:MarlinMode label_feature_settings:Funkcie label_sound:Sound label_rgb_settings:Farba LED label_rgb_off:Vypnúť LED label_terminal:Terminál label_leveling:Vyrovnanie label_point_1:Bod 1 label_point_2:Bod 2 label_point_3:Bod 3 label_point_4:Bod 4 label_point_5:Bod 5 label_bed_leveling:Bed Level label_bl_complete:Bed Leveling Complete label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save! label_bl_enable:BL: on label_bl_disable:BL: off label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Save to slot label_abl_settings_ubl_load:Load from slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot? label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P Offset label_h_offset:H Offset label_distance:Distance label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:Kalibrácia label_more:Viacej label_screen_info:Info label_bg_color:Background color label_font_color:Font color label_percentage:Percentá label_percentage_speed:Rýchlosť label_percentage_flow:Prietok label_babystep:BabyStep label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Kalibrácia label_adjust_info:Dotknite sa postupne všetkých bodov label_adjust_ok:Kalibrácia úspešná label_adjust_failed:Kalibrácia zlyhala, opakovať label_unifiedmove:Pohyb label_unifiedheat:Nahriať label_touch_to_exit:Dotknite sa obrazovky pre ukončenie label_mainmenu:Menu label_parameter_setting:Parametre label_eeprom_settings:EEPROM label_leveling_edge_distance:Bed edge distance label_tuning:Tuning label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune may take some time to complete.\nContinue? label_pid_start_info_2:PID autotune in progress! label_pid_start_info_3:Do not touch the screen until completed (green LED ON)! label_tune_extruder:Tune steps label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:Connection label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_sl.ini ================================================ #### Language Code:SL ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:Baud hitr. label_language:Slovenski label_rotate_ui:Obrni UI label_terminal_ack:Pokaži ACK v terminalu label_persistent_info:Stalno prikazuj status label_file_list_mode:Prikaz datotek v seznamu label_file_sort_by:Sort files by label_ack_notification:ACK notification style label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:Marlin čez cel zaslon label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:Hitr. pomika (X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:Samodejni izklop label_fil_runout:Senzor filamenta label_pl_recovery_en:Power loss recovery label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:Touch sounds label_toast_sound:Toast Notifications label_alert_sound:Popups and Alerts label_heater_sound:Heater notification label_knob_led_color:LED enkoder gumba label_knob_led_idle:Rotary Knob LED idle label_lcd_brightness:Svetilnost label_lcd_idle_brightness:Zatemnitev LCD label_lcd_idle_delay:Zatemnitev po času label_start_gcode_enabled:Zaženi startno G-kodo label_end_gcode_enabled:Zaženi končno G-kodo label_cancel_gcode_enabled:Zaženi G-kodo preklica label_steps_setting:Št. korakov na MM label_maxfeedrate:Max hitr. dovajanja fil. label_maxacceleration:Max pospešek label_acceleration:Pospešek label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:Auto Firmware Retract label_hotend_offset:Offset 2nd Nozzle label_probe_offset:Odmik sonde label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:Tok driverja mot. (mA) label_bump_sensitivity:TMC občutljivost trka label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:Pospešek tiska label_retract_acceleration:Pospešek privleka fil. label_travel_acceleration:Pospešek pomika label_retract_length:Retract length label_retract_swap_length:Retract swap length label_retract_feedrate:Retract feedrate label_retract_z_lift:Z lift on retraction label_recover_length:Extra recover length label_swap_recover_length:Extra recover swap length label_recover_feedrate:Recover feedrate label_swap_recover_feedrate:Swap recover feedrate label_mbl_offset:MBL Offset label_save:Shrani label_restore:Restore label_reset:Reset label_eeprom_save_info:Shrani nastavitve tiskalnika v EEPROM? label_eeprom_restore_info:Naloži nastavitve iz EEPROM-a? label_eeprom_reset_info:Reset EEPROM to stock printer settings? label_settings_save:Save settings label_settings_restore:Obnovi nastavitve label_settings_reset:Reset nastavitev label_settings_reset_info:Reset vseh nastavitev na privzete vrednosti? label_settings_reset_done:Reset vseh nastavitev uspešna.\nPonovno zaženi napravo. label_page_up:Stran gor label_page_down:Stran dol label_up:Up label_down:Down label_next:Next label_back:Nazaj label_inc:Več label_dec:Manj label_load:Naloži label_unload:Izvrzi label_on:ON label_off:OFF label_auto:AUTO label_smart:SMART label_slow:Počasi label_normal:Normalo label_fast:Hitro label_zero:Nič label_half:50% moč label_full:100% moč label_custom:Po meri label_clear:Clear label_default:Default label_start:Start label_stop:Stop label_pause:Pavza label_resume:Nadaljuj label_init:Init label_disconnect:Odklopi label_shut_down:Izklop label_force_shut_down:Prisilni izklop label_emergencystop:EM. STOP label_preheat:Predgretje label_preheat_both:Oboje label_cooldown:Ohlajanje label_confirm:OK label_cancel:Prekliči label_warning:Opozorilo label_continue:Nadaljuj label_confirmation:Are you sure? label_status:Info label_ready:Pripravljen label_busy:Zaseden s procesiranjem, prosim počakaj... label_loading:Nalagam... label_unconnected:Nobenega tiskalnika priključenega! label_info:Info label_invalid_value:Invalid value(s) label_timeout_reached:Timeout reached! label_disconnect_info:Zdaj lahko upravljaš tiskalnik z računalnikom! label_shutting_down:Ugašam... label_wait_temp_shut_down:Čakam, da se šoba ohladi pod %d°C label_power_failed:Nadaljuj s tiskanjem? label_process_running:Process already running! label_process_completed:Process completed! label_process_aborted:Process aborted! label_tftsd:TFT SD label_read_tftsd_error:Napaka branja TFT SD kartice! label_tftsd_inserted:Kartica vstavljena! label_tftsd_removed:Kartica odstranjena! label_u_disk:USB disk label_read_u_disk_error:Napaka branja USB diska! label_u_disk_inserted:USB disk vstavljen! label_u_disk_removed:USB disk odstranjen! label_onboardsd:SKR SD label_read_onboardsd_error:Napaka branja SKR SD kartice! label_filament_runout:Ni več filamenta! label_disable_steppers:Disarm All label_xy_unlock:Disarm XY label_start_print:Start tiska:\n%s? label_stop_print:Ustavim tisk? label_is_pause:Ne morem estrudirat med tiskanjem.\nPavziram tisk? label_m0_pause:Pavza (M0 ukaz) label_test:Test label_deploy:Postavi label_stow:Skrij label_repeat:Ponovi label_nozzle:Šoba label_bed:Miza label_chamber:Chamber label_fan:Hlajenje label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 sek. label_10_seconds:10 sek. label_30_seconds:30 sek. label_60_seconds:1 min. label_120_seconds:2 min. label_300_seconds:5 min. label_white:Belo label_black:Črno label_blue:Mordo label_red:Rdeče label_green:Zeleno label_cyan:Modrozelena label_yellow:Rumena label_brown:Rjana label_gray:Siva label_orange:Oranžna label_indigo:Indigo label_violet:Vijolična label_magenta:Magenta label_purple:Temno vijolična label_lime:Limeta label_darkblue:Temno morda label_darkgreen:Temno zelena label_darkgray:Temno siva label_heat:Gretje label_move:Pomik label_home:Domov label_print:Tisk label_extrude:Filament label_settings:Nastavitve label_screen_settings:Zaslon label_machine_settings:Naprava label_marlin_mode_settings:MarlinMode label_feature_settings:Funkcije label_sound:Sound label_rgb_settings:Barva LED label_rgb_off:LED Off label_terminal:Terminal label_leveling:Niveliraj label_point_1:Točka 1 label_point_2:Točka 2 label_point_3:Točka 3 label_point_4:Točka 4 label_point_5:Točka 5 label_bed_leveling:Bed Level label_bl_complete:Bed Leveling Complete label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save! label_bl_enable:BL: on label_bl_disable:BL: off label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Save to slot label_abl_settings_ubl_load:Load from slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot? label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P odmik label_h_offset:H odmik label_distance:Distance label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:Umeri label_more:Več label_screen_info:Info label_bg_color:Barva ozadja label_font_color:Barva pisave label_percentage:Procent label_percentage_speed:Hitrost label_percentage_flow:Pretok label_babystep:BabyStep label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Kalibracija zaslona na dotik label_adjust_info:Pritisni na rdečo piko label_adjust_ok:Nastavitev uspešna label_adjust_failed:Nastavitev neuspešna, prosim poskusi ponovno label_unifiedmove:Vodenje label_unifiedheat:Gretje label_touch_to_exit:Klikni kjerkoli za izhod label_mainmenu:Meni label_parameter_setting:Parametri label_eeprom_settings:EEPROM label_leveling_edge_distance:Bed edge distance label_tuning:Tuning label_pid:PID label_pid_title:PID autotune label_pid_start_info:PID autotune may take some time to complete.\nContinue? label_pid_start_info_2:PID autotune in progress! label_pid_start_info_3:Do not touch the screen until completed (green LED ON)! label_tune_extruder:Tune steps label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:Connection label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_tc.ini ================================================ #### Language Code:TC ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:串列傳輸速率 label_language:正體中文 label_rotate_ui:顯示方向 label_terminal_ack:在G-code終端顯示溫度 label_persistent_info:頂部溫度訊息 label_file_list_mode:文件預覽列表模式 label_file_sort_by:Sort files by label_ack_notification:ACK 弹窗类型 label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:全螢幕Marlin模式 label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:移動速度(X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:自動關機 label_fil_runout:耗材感應器 label_pl_recovery_en:断电续打 label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:按鈕聲音 label_toast_sound:Toast 提示聲音 label_alert_sound:彈窗和提示聲音 label_heater_sound:Heater notification label_knob_led_color:旋鈕LED顏色 label_knob_led_idle:旋鈕LED自動睡眠 label_lcd_brightness:螢幕亮度 label_lcd_idle_brightness:睡眠狀態螢幕亮度 label_lcd_idle_delay:螢幕進入睡眠時間 label_start_gcode_enabled:執行起始G-code label_end_gcode_enabled:執行結尾G-code label_cancel_gcode_enabled:中斷執行G-code label_steps_setting:電機每毫米步數Steps/mm label_maxfeedrate:最大移動速度 label_maxacceleration:最大加速度 label_acceleration:加速度 label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Home Offset label_fwretract:FW Retraction label_fwrecover:FW Retraction Recover label_retract_auto:FW自动回抽 label_hotend_offset:Offset 2nd Nozzle label_probe_offset:探針偏移 label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:驅動晶片電流設定 (mA) label_bump_sensitivity:堵料檢測靈敏度 label_hybrid_threshold:TMC HybridThreshold label_stealth_chop:TMC StealthChop label_print_acceleration:列印加速度 label_retract_acceleration:回抽加速度 label_travel_acceleration:空跑加速度 label_retract_length:FW回抽长度 label_retract_swap_length:换料时回抽的长度 label_retract_feedrate:FW回抽速度 label_retract_z_lift:回抽时Z轴抬升的高度 label_recover_length:额外挤出的长度 label_swap_recover_length:换料时额外挤出的长度 label_recover_feedrate:FW挤出速度 label_swap_recover_feedrate:换料时挤出的速度 label_mbl_offset:MBL Offset label_save:儲存設定 label_restore:恢復 label_reset:重設 label_eeprom_save_info:是否保存打印机设置到EEPROM? label_eeprom_restore_info:是否从EEPROM加载设置? label_eeprom_reset_info:重置EEPROM到出厂设置? label_settings_save:保存设置 label_settings_restore:保存设置 label_settings_reset:重置设置 label_settings_reset_info:所有設定都會恢復預設值，確定嗎? label_settings_reset_done:重設成功，請重新開機 label_page_up:上一頁 label_page_down:下一頁 label_up:抬升 label_down:降低 label_next:下一個 label_back:返回 label_inc:增加 label_dec:減少 label_load:進料 label_unload:退料 label_on:開啟 label_off:關閉 label_auto:AUTO label_smart:自動 label_slow:慢速 label_normal:常速 label_fast:快速 label_zero:歸零 label_half:半速 label_full:全速 label_custom:自定義 label_clear:Clear label_default:默認 label_start:開始 label_stop:停止 label_pause:暫停 label_resume:繼續 label_init:Init label_disconnect:中斷連線 label_shut_down:關閉電源 label_force_shut_down:強制關機 label_emergencystop:立刻停止 label_preheat:預熱 label_preheat_both:全部 label_cooldown:冷卻 label_confirm:確定 label_cancel:取消 label_warning:警告 label_continue:繼續 label_confirmation:Are you sure? label_status:狀態 label_ready:已準備好 label_busy:系統繁忙請稍等 label_loading:讀取中 label_unconnected:尚未連線到主機板 label_info:提示 label_invalid_value:沒有有效的條件! label_timeout_reached:已超時! label_disconnect_info:電腦控制模式 label_shutting_down:關機中 label_wait_temp_shut_down:噴頭降溫中，直到%d ℃時自動關機 label_power_failed:要繼續列印嗎？ label_process_running:正在運行,請稍後 label_process_completed:處理已完成! label_process_aborted:處理已被中斷! label_tftsd:SD卡 label_read_tftsd_error:SD卡讀取失敗 label_tftsd_inserted:偵測到SD卡 label_tftsd_removed:SD卡已拔出 label_u_disk:隨身碟 label_read_u_disk_error:隨身碟讀取失敗 label_u_disk_inserted:偵測到隨身碟 label_u_disk_removed:隨身碟已拔出 label_onboardsd:主機板插槽的SD卡 label_read_onboardsd_error:主機板插槽的SD卡讀取失敗 label_filament_runout:沒偵測到耗材 label_disable_steppers:解鎖電機 label_xy_unlock:解锁XY label_start_print:是否开始打印:\n%s? label_stop_print:要停止列印嗎？ label_is_pause:列印時無法擠出耗材，要暫停列印嗎？ label_m0_pause:M0暫停 label_test:BLTouch檢測 label_deploy:探針彈出 label_stow:探針收回 label_repeat:精度測試 label_nozzle:噴頭 label_bed:熱床 label_chamber:機殼 label_fan:風扇 label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5秒. label_10_seconds:10秒. label_30_seconds:30秒. label_60_seconds:1分鐘 label_120_seconds:2分鐘 label_300_seconds:5分鐘 label_white:白 label_black:黑 label_blue:藍 label_red:紅 label_green:綠 label_cyan:青 label_yellow:黃 label_brown:棕 label_gray:灰 label_orange:橘 label_indigo:靛藍 label_violet:藍紫 label_magenta:桃紅 label_purple:紫 label_lime:萊姆 label_darkblue:暗藍 label_darkgreen:暗綠 label_darkgray:深灰 label_heat:加熱 label_move:移動 label_home:回原點 label_print:列印 label_extrude:擠出 label_settings:設定 label_screen_settings:螢幕設定 label_machine_settings:機器設定 label_marlin_mode_settings:MarlinMode label_feature_settings:功能設定 label_sound:聲音 label_rgb_settings:燈光顏色 label_rgb_off:關閉燈光 label_terminal:終端 label_leveling:調平 label_point_1:第一點 label_point_2:第二點 label_point_3:第三點 label_point_4:第四點 label_point_5:第五點 label_bed_leveling:Bed Level label_bl_complete:平臺調平完成! label_bl_smart_fill:部分點未探測，已被自動填充，需要手動保存! label_bl_enable:BL:已開啟 label_bl_disable:BL:已關閉 label_abl:自動調平 label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Mesh Bed Leveling label_abl_settings:Auto Bed Leveling label_abl_settings_bbl:Bilinear Bed Leveling label_abl_settings_ubl:Unified Bed Leveling label_abl_settings_ubl_save:Save to slot label_abl_settings_ubl_load:Load from slot label_abl_slot0:Slot 0 label_abl_slot1:Slot 1 label_abl_slot2:Slot 2 label_abl_slot3:Slot 3 label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot? label_abl_z:Z Fade label_level_corner:L corner label_p_offset:P軸偏移 label_h_offset:H軸偏移 label_distance:距離 label_load_unload:Load/Unload label_load_unload_short:(Un)Load label_touchscreen_adjust:觸控校正 label_more:更多 label_screen_info:關於 label_bg_color:背景顏色 label_font_color:字體顏色 label_percentage:百分比 label_percentage_speed:速度百分比 label_percentage_flow:流量百分比 label_babystep:Z軸微調 label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:觸控校正 label_adjust_info:點擊紅點 label_adjust_ok:校正成功 label_adjust_failed:校正失敗 label_unifiedmove:運動 label_unifiedheat:溫度 label_touch_to_exit:觸控任意位置退出頁面 label_mainmenu:選單 label_parameter_setting:參數設定 label_eeprom_settings:EEPROM label_leveling_edge_distance:手动调平边沿距离 label_tuning:调整 label_pid:PID label_pid_title:PID自动整定 label_pid_start_info:开始PID自动整定,需要几分钟来完成,是否继续? label_pid_start_info_2:PID 正在自动整定中! label_pid_start_info_3:不要操作触控屏直到整定完成! label_tune_extruder:Tune steps label_tune_ext_extrude_100:挤出100mm label_tune_ext_temp:Extruder tuning | Heat label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding. label_tune_ext_heatoff:Turn the heater off? label_tune_ext_adj_esteps:Adjust E-Steps label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f label_tune_ext_measured:Length remaining: label_tune_ext_old_estep:Old e-steps: %0.2f label_tune_ext_new_estep:New e-steps: %0.2f label_connection_settings:连接 label_notifications:Notifications label_mesh_editor:Mesh edit label_mesh_tuner:Mesh tuner label_case_light:Case light label_load_started:Loading filament.\nPlease wait for the process to complete. label_unload_started:Unloading filament.\nPlease wait for the process to complete. label_heaters_on:Some heaters are still ON.\nDo you want to stop them? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Hotend temperature is below minimum temperature (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_tr.ini ================================================ #### Language Code:TR ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:BaudRate label_language:Türkçe label_rotate_ui:Döndür label_terminal_ack:Terminalde onay mesajları label_persistent_info:Kalıcı Durum Mesajı label_file_list_mode:Liste Görünümü label_file_sort_by:Sort files by label_ack_notification:Onay mesajı stili label_emulate_m600:Emulate M600 label_serial_always_on:Seri Bağ. Sürekli Açık label_marlin_fullscreen:Tam Ekran Marlin Modu label_marlin_show_title:Marlin Modu Başlık Desteği label_marlin_type:Marlin Mode Type label_move_speed:Hareket Hızı(X Y Z) label_auto_load_leveling:Seviyelemeyi Oto Kaydet/Yükle label_fan_speed_percent:Yüzdesel Fan Hızı label_xy_offset_probing:XY Algılama Offset Desteği label_z_steppers_alignment:Z Motor Oto-Hizalama label_ps_on:Oto. Kapanma label_fil_runout:Filaman Sensörü label_pl_recovery_en:Güç Kesintisi Kurtarma label_pl_recovery_home:Güç Kesintisi Sıfırama label_btt_mini_ups:BTT UPS Desteği label_touch_sound:Dokunma Sesi label_toast_sound:Ara Bildirimler label_alert_sound:Uyarılar ve Sesler label_heater_sound:Heater notification label_knob_led_color:Döner Düğme LED label_knob_led_idle:Düğme LED bekleme label_lcd_brightness:Parlaklık label_lcd_idle_brightness:Parlaklık Kısılma Oranı label_lcd_idle_delay:Parlaklık Kısılma Süresi label_start_gcode_enabled:Başlangıç gcodeu kullan label_end_gcode_enabled:Bitiş gcodeu kullan label_cancel_gcode_enabled:İptal gcodeu kullan label_steps_setting:mm/adım label_maxfeedrate:Maks. İlerleme Hızı label_maxacceleration:Maks. İvmelenme label_acceleration:İvmelenme label_jerk:Jerk label_junction_deviation:Junction Deviation label_home_offset:Sıfır Offseti label_fwretract:Yazılım Geriçekmesi label_fwrecover:Yazılım Geriitmesi label_retract_auto:Oto. yazılım geriçekmesi label_hotend_offset:2. Nozül Mesafesi label_probe_offset:Prob Offseti label_lin_advance:Linear Advance label_filament_setting:Filament Diameter label_current_setting:Sürücü Akımı (mA) label_bump_sensitivity:TMC Çarpma Hassasiyeti label_hybrid_threshold:TMC Hibrit Eşiği label_stealth_chop:TMC StealthChop label_print_acceleration:Baskı İvme label_retract_acceleration:Geriçekme İvme label_travel_acceleration:Gezinti İvme label_retract_length:Mesafe label_retract_swap_length:Kafa Değ. Mesafe label_retract_feedrate:Hız label_retract_z_lift:Z Sıçraması label_recover_length:Ekstra geriitme mesafesi label_swap_recover_length:Ekstra geriitme değişim mesafesi label_recover_feedrate:Geriitme hızı label_swap_recover_feedrate:Geriitme değişim hızı label_mbl_offset:MBL Offset label_save:Kaydet label_restore:Geri Al label_reset:Sıfırla label_eeprom_save_info:Yazıcı ayarları kaydedilsin mi? label_eeprom_restore_info:Ayarlar kayıttan geri yüklensin mi? label_eeprom_reset_info:Fabrika ayarlarına dönülsün mü? label_settings_save:Ayarları kaydet label_settings_restore:Ayarları geri al label_settings_reset:Varsayılan ayarlara dön label_settings_reset_info:Tüm ayarlar varsayılana değerlere sıfırlanacak.\nDevam edilsin mi? label_settings_reset_done:Tüm ayarlar başarıyla sıfırlandı.\nYeni ayarların etkili olması için cihazı yeniden başlatın. label_page_up:Yukarı label_page_down:Aşağı label_up:Yükselt label_down:Alçalt label_next:Sonraki label_back:Geri label_inc:Arttır label_dec:Azalt label_load:Yükle label_unload:Çıkar label_on:Açık label_off:Kapalı label_auto:AUTO label_smart:AKILLI label_slow:Yavaş label_normal:Normal label_fast:Hızlı label_zero:Sıfır label_half:Yarım label_full:Tam label_custom:Diğer label_clear:Temizle label_default:Varsayılan label_start:Başlat label_stop:Durdur label_pause:Duraklat label_resume:Sürdür label_init:Init label_disconnect:Bağlt. Kes label_shut_down:Kapat label_force_shut_down:Zorla Kapat label_emergencystop:AcilDurdur label_preheat:Ön Isıtma label_preheat_both:Birlikte label_cooldown:Soğutma label_confirm:Tamam label_cancel:İptal label_warning:Uyarı label_continue:Devam et label_confirmation:Emin misiniz? label_status:Durum label_ready:Hazır label_busy:İşlem sürüyor, bekleyiniz... label_loading:Yükleniyor... label_unconnected:Yazıcı bağlı değil! label_info:Bilgi label_invalid_value:Geçersiz değer(ler) label_timeout_reached:Zaman aşımı! label_disconnect_info:Artık yazıcıyı bilgisayarınızdan kontrol edebilirsiniz! label_shutting_down:Kapatılıyor... label_wait_temp_shut_down:Kafa sıcaklığının %d ℃ altına inmesini bekleyiniz. label_power_failed:Baskı sürdürülsün mü? label_process_running:Proses zaten çalışıyor! label_process_completed:Proses tamamlandı! label_process_aborted:Proses durduruldu! label_tftsd:SD Kart label_read_tftsd_error:SD kart okunamadı! label_tftsd_inserted:SD Kart Takıldı! label_tftsd_removed:SD Kart Çıkarıldı! label_u_disk:USB Disk label_read_u_disk_error:USB disk okunamadı! label_u_disk_inserted:USB Disk Takıldı! label_u_disk_removed:USB Disk Çıkarıldı! label_onboardsd:Dahili SD label_read_onboardsd_error:Dahili SD Okunamadı! label_filament_runout:Filaman Bitti! label_disable_steppers:Motor Dur. label_xy_unlock:XY Dur. label_start_print:Baskıyı Başlat:\n%s? label_stop_print:Baskı durdurulsun mu? label_is_pause:Baskı esnasında ekstrüzyon yapılamaz.\nBaskı duraklatılsın mı? label_m0_pause:M0 komutu ile duraklatıldı label_test:Test label_deploy:Aç label_stow:Kapat label_repeat:Tekrarla label_nozzle:Nozül label_bed:Tabla label_chamber:Kabin label_fan:Fan label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1°C label_5_degree:5°C label_10_degree:10°C label_001_mm:0.01mm label_01_mm:0.1mm label_1_mm:1mm label_5_mm:5mm label_10_mm:10mm label_100_mm:100mm label_200_mm:200mm label_1_percent:%1 label_5_percent:%5 label_10_percent:%10 label_percent_value:%%%d label_5_seconds:5 Sn. label_10_seconds:10 Sn. label_30_seconds:30 Sn. label_60_seconds:1 Dak. label_120_seconds:2 Dak. label_300_seconds:5 Dak. label_white:Beyaz label_black:Siyah label_blue:Mavi label_red:Kırmızı label_green:Yeşil label_cyan:Camgöbeği label_yellow:Sarı label_brown:Kahverengi label_gray:Gri label_orange:Turuncu label_indigo:Çivit Mavisi label_violet:Menekşe label_magenta:Eflatun label_purple:Mor label_lime:Çim Rengi label_darkblue:Koyu Mavi label_darkgreen:Koyu Yeşil label_darkgray:Koyu Gri label_heat:Isıt label_move:Hareket label_home:Sıfırla label_print:Yazdır label_extrude:Filament label_settings:Ayarlar label_screen_settings:Ekran label_machine_settings:Makine label_marlin_mode_settings:MarlinMode label_feature_settings:Özellik label_sound:Ses label_rgb_settings:LED Rengi label_rgb_off:LED'i Kapat label_terminal:Terminal label_leveling:Seviyele label_point_1:1.Nokta label_point_2:2.Nokta label_point_3:3.Nokta label_point_4:4.Nokta label_point_5:5.Nokta label_bed_leveling:Seviyeleme label_bl_complete:Seviyeleme Tamamlandı label_bl_smart_fill:Eksik algılama noktaları oluşturuldu.\nNot: Kaydetmeyi unutmayın! label_bl_enable:BL: açık label_bl_disable:BL: kapalı label_abl:Sev.-ABL label_bbl:Sev.-BBL label_ubl:Sev.-UBL label_mbl:Sev.-MBL label_mbl_settings:Izgara Seviyeleme label_abl_settings:Otomatik Seviyeleme label_abl_settings_bbl:Bilineer Seviyeleme label_abl_settings_ubl:Birleşik Seviyeleme label_abl_settings_ubl_save:Yuvaya Kaydet label_abl_settings_ubl_load:Yuvadan Oku label_abl_slot0:Yuva 0 label_abl_slot1:Yuva 1 label_abl_slot2:Yuva 2 label_abl_slot3:Yuva 3 label_abl_slot_eeprom:Yuvayı hafızaya al? (EEPROM a kaydet) label_abl_z:Z Etki label_level_corner:L corner label_p_offset:P Offset label_h_offset:H Offset label_distance:Mesafe label_load_unload:Yükle/Çıkar label_load_unload_short:Yük./Çık. label_touchscreen_adjust:Kalibre label_more:Ayar label_screen_info:Bilgi label_bg_color:arkaplan renk label_font_color:font renk label_percentage:Yüzde label_percentage_speed:Hız label_percentage_flow:Akış label_babystep:MiniAdım label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Dokunmatik Ekran Kalibrasyonu label_adjust_info:Lütfen kırmızı noktaya tıklayın label_adjust_ok:Kalibrasyon başarılı. label_adjust_failed:Kalibrasyon başarısız, lütfen tekrar deneyiniz. label_unifiedmove:Hareket label_unifiedheat:Isıtma/Fan label_touch_to_exit:Çıkmak için ekrana dokunun label_mainmenu:Menü label_parameter_setting:Parametre Ayarları label_eeprom_settings:EEPROM label_leveling_edge_distance:Tabla kenar mesafesi label_tuning:Ayar label_pid:PID label_pid_title:PID oto. ayar label_pid_start_info:PID oto. ayarlama zaman alabilir.\nDevam? label_pid_start_info_2:PID oto. ayar sürüyor! label_pid_start_info_3:Tamamlanana kadar ekrana dokunmayınız (yeşil led açık)! label_tune_extruder:Ext. Adım label_tune_ext_extrude_100:Ext. 100mm label_tune_ext_temp:Ekstruder ayarlama | Isı label_tune_ext_mark120mm:Filamanda 120mm'yi işaretleyin\nHazır olunca '%s'e basın\nEkstrüzyondan sonra kalan mesafeyi ölçün label_tune_ext_heatoff:Isıtıcıyı kapat? label_tune_ext_adj_esteps:E-Adım ayarla label_tune_ext_esteps_saved:Yeni E-Adımı kaydedildi!\nEEPROM'a kaydetmeyi unutmayınız.\nYeni Değer: %0.2f label_tune_ext_measured:Kalan mesafe: label_tune_ext_old_estep:Eski E-Adımı: %0.2f label_tune_ext_new_estep:Yeni E-Adımı: %0.2f label_connection_settings:Bağlantı label_notifications:Bildirimler label_mesh_editor:Ölç. Düzelt label_mesh_tuner:Ölçüm Düzeltme label_case_light:Aydınlatma label_load_started:Filaman yüklenecek.\nİşlem tamamlanana kadar başka işlem başlatmayınız. label_unload_started:Filaman çıkartılacak.\nİşlem tamamlanana kadar başka işlem başlatmayınız. label_heaters_on:Isıtıcılar devrede.\nIsıtıcılar kapatılsın mı? label_print_finished: Baskı\n tamamlandı label_main_screen:Ana label_previous_print_data:Özet label_print_time:Baskı Süresi: %02u:%02u:%02u label_filament_length:\nFilament uzunluğu: %1.2fm label_filament_weight:\nFilament ağırlığı: %1.2fg label_filament_cost:\nFilament maliyeti: %1.2f label_no_filament_stats:\nFilament bilgisi yok. label_click_for_more:Özet için dokun label_ext_templow:Ekstruder sıcaklığı minimum sıcaklığın altında (%d℃). label_heat_hotend:Ekstruderi %d℃ ye ısıt? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Hizala label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_uk.ini ================================================ #### Language Code:UK ## Language Version:20210530 ## Maximum byte per keyword is 250 Bytes. ## Escape characters are not supported except newline '\n' label_baudrate:Baudrate label_language:Українська label_rotate_ui:Повернути інтерфейс label_terminal_ack:ACK терміналу (°С) label_persistent_info:Нагрівання в інфостроці label_file_list_mode:Файли в режимі рядків label_file_sort_by:Sort files by label_ack_notification:ACK стиль повідомлення label_emulate_m600:Emulate M600 label_serial_always_on:Serial Always ON label_marlin_fullscreen:Marlin на весь екран label_marlin_show_title:Marlin Mode Title Support label_marlin_type:Marlin Mode Type label_move_speed:Швидкість (X Y Z) label_auto_load_leveling:Auto Save Load Leveling label_fan_speed_percent:Fan Speed As Percentage label_xy_offset_probing:XY Offset Probing Support label_z_steppers_alignment:Z Steppers Auto-Alignment label_ps_on:автовимкнення label_fil_runout:Сенсор філаменту label_pl_recovery_en:Робота після втрати живлення label_pl_recovery_home:Power Loss Recovery Homing label_btt_mini_ups:BTT UPS Support label_touch_sound:Звуки натискань label_toast_sound:Звуки інфострічки label_alert_sound:Попередження label_heater_sound:Heater notification label_knob_led_color:Підсвічування енкодера label_knob_led_idle:Простій підсвічування енкодера label_lcd_brightness:Яскравість label_lcd_idle_brightness:Регулювання яскравості LCD label_lcd_idle_delay:Час до загасання LCD label_start_gcode_enabled:Розпочати G-код перед друком label_end_gcode_enabled:Завершити G-код після друку label_cancel_gcode_enabled:G-код скасувати друк label_steps_setting:Налаштування кроків на мм label_maxfeedrate:MAX швидкість подачі label_maxacceleration:MAX прискорення label_acceleration:Прискорення label_jerk:Ривок label_junction_deviation:Відхилення вузла label_home_offset:Дім - відступи label_fwretract:M207 ретракт label_fwrecover:M208 відновлення ретракт label_retract_auto:Авто FW ретракт label_hotend_offset:Зсув 2-го сопла label_probe_offset:Зміщення датчика label_lin_advance:К-фактор label_filament_setting:Filament Diameter label_current_setting:Налаштування TMC драйверів label_bump_sensitivity:TMC чутливість удару label_hybrid_threshold:TMC гібридний поріг label_stealth_chop:TMC StealthChop label_print_acceleration:прискорення друку label_retract_acceleration:ретракт label_travel_acceleration:Переміщення label_retract_length:Довжина подачі label_retract_swap_length:Довжина подачі при зміні сопла label_retract_feedrate:Швидкість подачі label_retract_z_lift:Підйом по Z label_recover_length:Довжина label_swap_recover_length:Довжина при зміні сопла label_recover_feedrate:Швидкість подачі label_swap_recover_feedrate:Швидкість подачі при зміні сопла label_mbl_offset:MBL Offset label_save:Зберегти label_restore:Повернути label_reset:Скидання label_eeprom_save_info:Зберегти налаштування принтера в EEPROM? label_eeprom_restore_info:Завантажити налаштування із EEPROM? label_eeprom_reset_info:Скинути EEPROM налаштування принтера на початкові? label_settings_save:Зберегти налаштування label_settings_restore:Відновити налаштування label_settings_reset:Скинути налаштування label_settings_reset_info:Всі налаштування будуть скинуті за замовчуванням. Бажаєте продовжити? label_settings_reset_done:Скидання налаштувань екрана. Для повного вступу в силу, перезавантажте пристрій. label_page_up:Вгору label_page_down:Вниз label_up:Вгору label_down:Вниз label_next:Наступний label_back:Назад label_inc:Збільшити label_dec:Зменшити label_load:Завантаження label_unload:Вивантаження label_on:Увімкнути label_off:Вимкн label_auto:AUTO label_smart:Розумний label_slow:Повільно label_normal:Звичайно label_fast:Швидко label_zero:Обнулити label_half:50% label_full:100% label_custom:Своє меню label_clear:Прибрати label_default:За замовчуванням label_start:Почати label_stop:Стоп label_pause:Пауза label_resume:Продовжити label_init:Init label_disconnect:Відключити label_shut_down:Вимкнути label_force_shut_down:Примусово вимк label_emergencystop:Екст. стоп label_preheat:Прогрівання label_preheat_both:Обидва label_cooldown:Охолодити label_confirm:OK label_cancel:Скасування label_warning:Увага label_continue:Продовження label_confirmation:Ви впевнені? label_status:Статус label_ready:Готовий label_busy:Опрацювання, зачекайте ... label_loading:Завантаження ... label_unconnected:Принтер не підключено! label_info:Інформація label_invalid_value:Неправильне значення! label_timeout_reached:Час вичерпано! label_disconnect_info:Керування принтером через комп'ютер label_shutting_down:Вимикаю ... label_wait_temp_shut_down:Дочекайтеся, поки температура сопла не буде нижче за %d℃ label_power_failed:Продовжити друк? label_process_running:Йде процес! label_process_completed:Процес завершений! label_process_aborted:Процес перерваний! label_tftsd:SD екрану label_read_tftsd_error:Не можу прочитати SD картку! label_tftsd_inserted:SD карта вставлена! label_tftsd_removed:SD карта витягнута! label_u_disk:Флеш карта label_read_u_disk_error:Не можу прочитати флеш картку! label_u_disk_inserted:Флеш карта вставлена! label_u_disk_removed:Флеш карта витягнута! label_onboardsd:SD на платі label_read_onboardsd_error:Не можу прочитати SD картку! label_filament_runout:Філамент закінчився label_disable_steppers:Вимкнути двигуни label_xy_unlock:Мотори вимкн label_start_print:Почати друк:\n%s? label_stop_print:Зупинити друк? label_is_pause:Неможлива екструзія при друку,\nпоставити на паузу? label_m0_pause:Пауза по команді M0 label_test:BLT тест label_deploy:BLT вниз label_stow:BLT вгору label_repeat:Точність Z label_nozzle:Сопло label_bed:Стіл label_chamber:Камера label_fan:Вентилятор label_bltouch:BLTouch label_touchmi:TouchMi label_1_degree:1℃ label_5_degree:5℃ label_10_degree:10℃ label_001_mm:0.01мм label_01_mm:0.1мм label_1_mm:1мм label_5_mm:5мм label_10_mm:10мм label_100_mm:100мм label_200_mm:200мм label_1_percent:1% label_5_percent:5% label_10_percent:10% label_percent_value:%d%% label_5_seconds:5 сек. label_10_seconds:10 сек. label_30_seconds:30 сек. label_60_seconds:1 хв. label_120_seconds:2 хв. label_300_seconds:5 хв. label_white:Білий label_black:Чорний label_blue:Синій label_red:Червоний label_green:Зелений label_cyan:Блакитний label_yellow:Жовтий label_brown:Коричневий label_gray:Сірий label_orange:Помаранчевий label_indigo:Індиго label_violet:Фіолетовий label_magenta:Маджента label_purple:Пурпуровий label_lime:Лаймовий label_darkblue:Темно-синій label_darkgreen:Темно-зелений label_darkgray:Темно-сірий label_heat:Нагрівання label_move:Рух label_home:Додому label_print:Друк label_extrude:Екструзія label_settings:Налаштування label_screen_settings:Екран label_machine_settings:Принтер label_marlin_mode_settings:MarlinMode label_feature_settings:Опції label_sound:Звуки label_rgb_settings:Колір LED label_rgb_off:LED вимкн. label_terminal:Термінал label_leveling:Стіл вруч. label_point_1:Точка 1 label_point_2:Точка 2 label_point_3:Точка 3 label_point_4:Точка 4 label_point_5:Точка 5 label_bed_leveling:Стіл вирівн. label_bl_complete:Вирівнювання столу закінчено label_bl_smart_fill:Відсутні точки заміру були автоматично заповнені.\nНатисніть зберегти! label_bl_enable:BL: увімкн. label_bl_disable:BL: вимкн. label_abl:ABL label_bbl:BBL label_ubl:UBL label_mbl:MBL label_mbl_settings:Вирівнювання по сітці label_abl_settings:Автовирівнювання label_abl_settings_bbl:Білінійне калібрування label_abl_settings_ubl:Універсальне калібрування label_abl_settings_ubl_save:Зберегти в клітинку label_abl_settings_ubl_load:Завантажити з осередку label_abl_slot0:Слот 0 label_abl_slot1:Слот 1 label_abl_slot2:Слот 2 label_abl_slot3:Слот 3 label_abl_slot_eeprom:Пам'ятати слот при перезавантаженні? (Зберегти в EEPROM) label_abl_z:Z загасання label_level_corner:L corner label_p_offset:Відступ P label_h_offset:Відступ H label_distance:Відступи label_load_unload:Завантаження/Вивантаження label_load_unload_short:(За/ви)вантаж. label_touchscreen_adjust:Калібрування сенсору label_more:Більше label_screen_info:Інформація label_bg_color:Колір фону label_font_color:Колір шрифту label_percentage:підстроювання label_percentage_speed:Швидкість label_percentage_flow:Потік label_babystep:Мікрокрок Z label_x_inc:X+ label_y_inc:Y+ label_z_inc:Z+ label_x_dec:X- label_y_dec:Y- label_z_dec:Z- label_x:X label_y:Y label_z:Z label_adjust_title:Калібрування екрану label_adjust_info:Натисніть на червону крапку label_adjust_ok:Успішне калібрування label_adjust_failed:Невдале калібрування, спробуйте знову label_unifiedmove:Рух label_unifiedheat:Нагрівання label_touch_to_exit:Натисніть, щоб повернутися label_mainmenu:Меню label_parameter_setting:Параметри label_eeprom_settings:EEPROM label_leveling_edge_distance:Відступи від країв столу label_tuning:Налагодження label_pid:PID label_pid_title:PID автоналаштування label_pid_start_info:Зараз буде почато PID автоналаштування, це займе деякий час. Продовжити? label_pid_start_info_2:Автоналаштування PID в дії! label_pid_start_info_3:Не чіпайте екран до закінчення налаштування (LED засвітиться зеленим)! label_tune_extruder:Налаштування кроків label_tune_ext_extrude_100:Екст. 100мм label_tune_ext_temp:Налаштування екструдера\nНагрівання label_tune_ext_mark120mm:Позначте 120 мм на філаменті.\nПо готовності '%s' введіть\nвиміряну отриману довжину після екструзії label_tune_ext_heatoff:Відключити нагрів? label_tune_ext_adj_esteps:Підстроювання E-кроків label_tune_ext_esteps_saved:E-кроки встановлені!\nНе забудьте зберегти їх в EEPROM\nНове значення:%0.2f label_tune_ext_measured:Довжина частини, що залишилася: label_tune_ext_old_estep:Старі E-кроки:%0.2f label_tune_ext_new_estep:Нові E-кроки:%0.2f label_connection_settings:З'єднання label_notifications:Повідомлення label_mesh_editor:Сітка ред. label_mesh_tuner:Сітка устан. label_case_light:Підсвічування label_load_started:Процедура завантаження філаменту, чекаємо поки хотенд досягне бажаної температури.\nБудь ласка, зачекайте. label_unload_started:Процедура вивавантаження філаменту, чекаємо поки хотенд досягне бажаної температури.\nБудь ласка, зачекайте. label_heaters_on:Деякі обігрівачі все ще увімкнені.\nВи хочете їх зупинити? label_print_finished: Print\n finished label_main_screen:Main label_previous_print_data:Brief label_print_time:Print Time: %02u:%02u:%02u label_filament_length:\nFilament length: %1.2fm label_filament_weight:\nFilament weight: %1.2fg label_filament_cost:\nFilament cost: %1.2f label_no_filament_stats:\nFilament data not available. label_click_for_more:Click for summary label_ext_templow:Температура хотенду нижче мінімальної температури (%d℃). label_heat_hotend:Heat hotend to %d℃? label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃). label_wait_heat_up:Wait for it to heat up. label_nozzle_stabilizing:Wait, nozzle stabilizing... label_z_align:Z Align label_macros:Macros label_mesh_valid:Mesh Validation label_wait_for_temp:Please wait for the temperature to rise label_stop_plane_test:Do you want to stop the plane test? ================================================ FILE: Firmware/2021-04-28/Screen-210609/TFT35/bmp/readme.md ================================================ ImageMagick command convert Reserve_6.bmp -alpha set -define bmp:format=bmp3 -define bmp3:alpha=true Reserve_6.bmp ================================================ FILE: Firmware/2021-04-28/Screen-210609/TFT35/font/readme.md ================================================ The "byte_ascii.fon" is the bitmap fonts of ASCII, size: 12*24 The "word_unicode.fon" is the bitmap fonts of UTF-16, size: 24*24 Scan direction: form UP to DOWN, from LEFT to RIGHT ================================================ FILE: Firmware/2021-04-28/Screen-210609/config.ini ================================================ #-------------------------------------------------------------------- # # DEFAULT CONFIG FILE FOR BigTreeTech TFT CONTROLLERS # #-------------------------------------------------------------------- #-------------------------------------------------------------------- # Supported TFT Variants #-------------------------------------------------------------------- # # BIGTREE_TFT35_V1_0 / BIGTREE_TFT35_V1_1 / BIGTREE_TFT35_V1_2 # BIGTREE_TFT35_V2_0 / BIGTREE_TFT35_V3_0 / BIGTREE_TFT35_E3_V3_0 # BIGTREE_TFT35_B1_V3_0 / BIGTREE_TFT43_V3_0 / BIGTREE_TFT50_V3_0 # BIGTREE_TFT70_V3_0 / BIGTREE_TFT28_V1_0 / BIGTREE_TFT28_V3_0 # BIGTREE_TFT24_V1_1 / MKS_TFT32_V1_3 / MKS_TFT32_V1_4 # MKS_TFT28_V3_0 / MKS_TFT28_V4_0 # # Firmware source: https://github.com/bigtreetech/BIGTREETECH-TouchScreenFirmware #-------------------------------------------------------------------- # Supported Marlin Firmware Versions #-------------------------------------------------------------------- # # Minimum Marlin firmware version: 2.0.8.1 # Distribution date: 2021-05-15 # Firmware source: https://github.com/MarlinFirmware/Marlin/releases # # In order the TFT firmware is able to provide all of its functionalities/features, # ensure that the following options are enabled in Marlin firmware. # # General options: # EEPROM_SETTINGS (in Configuration.h) # BABYSTEPPING (in Configuration_adv.h) # AUTO_REPORT_TEMPERATURES (in Configuration_adv.h) # AUTO_REPORT_POSITION (in Configuration_adv.h) # M115_GEOMETRY_REPORT (in Configuration_adv.h) # M114_DETAIL (in Configuration_adv.h) # REPORT_FAN_CHANGE (in Configuration_adv.h) # # Options to support printing from onboard SD: # SDSUPPORT (in Configuration.h) # LONG_FILENAME_HOST_SUPPORT (in Configuration_adv.h) # AUTO_REPORT_SD_STATUS (in Configuration_adv.h) # SDCARD_CONNECTION ONBOARD (in Configuration_adv.h) # # Options to support dialog with host: # EMERGENCY_PARSER (in Configuration_adv.h) # SERIAL_FLOAT_PRECISION 4 (in Configuration_adv.h) # HOST_ACTION_COMMANDS (in Configuration_adv.h) # HOST_PROMPT_SUPPORT (in Configuration_adv.h) # # Options to support M600 with host & (Un)Load menu: # Options to support dialog with host (as pre requisite) # NOZZLE_PARK_FEATURE (in Configuration.h) # ADVANCED_PAUSE_FEATURE (in Configuration_adv.h) # PARK_HEAD_ON_PAUSE (in Configuration_adv.h) # FILAMENT_LOAD_UNLOAD_GCODES (in Configuration_adv.h) # # Options to fully support Bed Leveling menu: # Z_MIN_PROBE_REPEATABILITY_TEST (in Configuration.h) # G26_MESH_VALIDATION (in Configuration.h) # Z_STEPPER_AUTO_ALIGN (in Configuration_adv.h) #-------------------------------------------------------------------- # General Settings #-------------------------------------------------------------------- #### Enable Status Screen # Status screen or home screen displays the current temperature, fan and speeds. # If this disabled, the main menu will become the default home screen. # Options: [Enable: 1, Disable: 0] status_screen:1 #### Baudrate / Connection speed # This baudrate setting is used for serial connection to the printer and other serial hosts like ESP8266. # Options: [2400: 0, 9600: 1, 19200: 2, 38400: 3, 57600: 4, 115200: 5, 250000: 6, 500000: 7, 1000000: 8] baudrate:5 #### Enable Multi-Serials # Multi-Serials connected to ESP3D, OctoPrint, Other TFT, etc... # Disable the serial port when it is not in use and floating. # Avoid the serial port to receive the wrong data because of electromagnetic interference. # Options: [0: Disable all multi-serials, # 1: Enable SERIAL_PORT_2 alone, # 2: Enable SERIAL_PORT_3 alone, # 4: Enable SERIAL_PORT_4 alone, # 3: = 1 + 2: Enable SERIAL_PORT_2 + SERIAL_PORT_3, # 5: = 1 + 4: Enable SERIAL_PORT_2 + SERIAL_PORT_4, # 6: = 2 + 4: Enable SERIAL_PORT_3 + SERIAL_PORT_4, # 7: = 1 + 2 + 4: Enable SERIAL_PORT_2 + SERIAL_PORT_3 + SERIAL_PORT_4] multi_serial:0 #### Default Touch Mode Language # Select the language to display on the LCD while in Touch Mode. # To add/flash a second language copy the required "language_xx.ini" file from "Language Packs" folder # to the SD root folder. Then preset the reset button to load/flash the copied language file. # Options: [primary language (english): 0, secondary language: 1] language:0 #### Default Touch Mode Colors # Set colors used in touchscreen mode. # Select an option from the provide list or set the color (RGB888 format) hex value directly (start with “0x”), # such as: Red: 0xFF0000, Green: 0x00FF00, Blue: 0x0000FF. # Options: [ WHITE: 0, BLACK: 1, RED: 2, GREEN: 3, BLUE: 4, CYAN: 5, MAGENTA: 6, YELLOW: 7, # ORANGE: 8, PURPLE: 9, LIME: 10, BROWN: 11, DARKBLUE: 12, DARKGREEN: 13, GRAY: 14, DARKGRAY: 15] ## Title background color title_back_color:1 ## Background color background_color:1 ## Font foreground color font_color:0 ## Reminder font color, such as: "No print attached", "Busy processing", etc reminder_color:2 ## Volume status/reminder font color, such as: "Card inserted", "Card removed" volume_status_color:5 ## Backgroud color for X Y Z position display in Status Screen menu status_xyz_bg_color:15 ## List View border color list_border_color:15 ## List View button background color list_button_bg_color:15 ## Color used by the Mesh Editor menu for drawing the mesh with the minimun value in the grid mesh_min_color:7 ## Color used by the Mesh Editor menu for drawing the mesh with the maximum value in the grid mesh_max_color:2 #### Terminal Text Color Scheme # Select as color scheme for displaying text in Teminal menu. # Options: [Material Dark: 0, Material Light: 1, High Contrast: 2] # Material Dark: Dark background with light font color and orange command font color. # Material Light: Light background with dark font color and orange command font color. # High-Contrast: Black background with white font color and orange command font color. terminal_color_scheme:0 #### Rotate UI # Rotate UI by 180 degrees. # Options: [enable: 1, disable: 0] rotate_ui:0 #### Temperature ACK In Terminal # Show or hide temperature ACK in Terminal menu. # Options: [show: 1, hide: 0] terminal_ack:0 #### Inverted Axes For Move Menu And Manual Leveling Menu # Invert axis button function in Move menu & Manual Leveling menu in order it matches the actual axis movement. # # NOTE: The Y-axis of different printer (move hotbed or move nozzle) move in different directions. # So Y-axis leveling invert can't follow up invert_axis[Y_AXIS]. # We separate a single variable "LY"(Leveling Y-axis) to deal with the y-axis leveling movement direction. # # Format: [X