Copy disabled (too large)
Download .txt
Showing preview only (10,919K chars total). Download the full file to get everything.
Repository: eez-open/psu-firmware
Branch: master
Commit: 94faf3fed2bd
Files: 452
Total size: 10.3 MB
Directory structure:
gitextract_hwkf52p7/
├── .gitignore
├── CONTRIB.TXT
├── LICENSE.TXT
├── build-arduino-library.py
├── build.py
├── doc/
│ ├── Doxyfile
│ ├── SCPI reference guide/
│ │ ├── Commands/
│ │ │ ├── EEZ PSU SCPI reference 1 - introduction.html
│ │ │ ├── EEZ PSU SCPI reference 10 - Programming examples.html
│ │ │ ├── EEZ PSU SCPI reference 12 - SCPI commands summary.html
│ │ │ ├── EEZ PSU SCPI reference 2 - syntax and style.html
│ │ │ ├── EEZ PSU SCPI reference 3 - registers and queue.html
│ │ │ ├── EEZ PSU SCPI reference 4 - common comand reference.html
│ │ │ ├── EEZ PSU SCPI reference 5.1 - ABORt.html
│ │ │ ├── EEZ PSU SCPI reference 5.10 - MMEMory.html
│ │ │ ├── EEZ PSU SCPI reference 5.11 - OUTPut.html
│ │ │ ├── EEZ PSU SCPI reference 5.12 - SENSe.html
│ │ │ ├── EEZ PSU SCPI reference 5.13 - SOURce.html
│ │ │ ├── EEZ PSU SCPI reference 5.14 - STATus.html
│ │ │ ├── EEZ PSU SCPI reference 5.15 - SYSTem.html
│ │ │ ├── EEZ PSU SCPI reference 5.16 - TRIGger.html
│ │ │ ├── EEZ PSU SCPI reference 5.2 - CALibrate.html
│ │ │ ├── EEZ PSU SCPI reference 5.3 - DIAGnostic.html
│ │ │ ├── EEZ PSU SCPI reference 5.4 - DISPlay.html
│ │ │ ├── EEZ PSU SCPI reference 5.5 - FETCh.html
│ │ │ ├── EEZ PSU SCPI reference 5.6 - INITiate.html
│ │ │ ├── EEZ PSU SCPI reference 5.7 - INSTrument.html
│ │ │ ├── EEZ PSU SCPI reference 5.8 - MEASure.html
│ │ │ ├── EEZ PSU SCPI reference 5.9 - MEMory.html
│ │ │ ├── EEZ PSU SCPI reference 6 - Device-specific commands.html
│ │ │ ├── EEZ PSU SCPI reference 7 - Error messages.html
│ │ │ ├── EEZ PSU SCPI reference 8 - Parameters and settings.html
│ │ │ └── EEZ PSU SCPI reference 9 - Software simulator.html
│ │ ├── EEZ PSU SCPI reference - last page.odt
│ │ ├── EEZ PSU SCPI reference - start page.odt
│ │ ├── EEZ PSU SCPI reference 1 - introduction.odt
│ │ ├── EEZ PSU SCPI reference 10 - Programming examples.odt
│ │ ├── EEZ PSU SCPI reference 11 - SCPI commands scheduled for upcoming releases.odt
│ │ ├── EEZ PSU SCPI reference 12 - SCPI commands summary.odt
│ │ ├── EEZ PSU SCPI reference 2 - syntax and style.odt
│ │ ├── EEZ PSU SCPI reference 3 - registers and queue.odt
│ │ ├── EEZ PSU SCPI reference 4 - common comand reference.odt
│ │ ├── EEZ PSU SCPI reference 5.1 - ABORt (pdf).odt
│ │ ├── EEZ PSU SCPI reference 5.1 - ABORt.odt
│ │ ├── EEZ PSU SCPI reference 5.10 - MMEMory.odt
│ │ ├── EEZ PSU SCPI reference 5.11 - OUTPut.odt
│ │ ├── EEZ PSU SCPI reference 5.12 - SENSe.odt
│ │ ├── EEZ PSU SCPI reference 5.13 - SOURce.odt
│ │ ├── EEZ PSU SCPI reference 5.14 - STATus.odt
│ │ ├── EEZ PSU SCPI reference 5.15 - SYSTem.odt
│ │ ├── EEZ PSU SCPI reference 5.16 - TRIGger.odt
│ │ ├── EEZ PSU SCPI reference 5.2 - CALibrate.odt
│ │ ├── EEZ PSU SCPI reference 5.3 - DIAGnostic.odt
│ │ ├── EEZ PSU SCPI reference 5.4 - DISPlay.odt
│ │ ├── EEZ PSU SCPI reference 5.5 - FETCh.odt
│ │ ├── EEZ PSU SCPI reference 5.6 - INITiate.odt
│ │ ├── EEZ PSU SCPI reference 5.7 - INSTrument.odt
│ │ ├── EEZ PSU SCPI reference 5.8 - MEASure.odt
│ │ ├── EEZ PSU SCPI reference 5.9 - MEMory.odt
│ │ ├── EEZ PSU SCPI reference 5.odt
│ │ ├── EEZ PSU SCPI reference 6 - Device-specific commands.odt
│ │ ├── EEZ PSU SCPI reference 7 - Error messages.odt
│ │ ├── EEZ PSU SCPI reference 8 - Parameters and settings.odt
│ │ ├── EEZ PSU SCPI reference 9 - Software simulator.odt
│ │ ├── EEZ PSU SCPI reference guide.odm
│ │ └── Registers/
│ │ └── SCPI registers (v1.1).sch
│ ├── architecture.odg
│ ├── build.bat
│ ├── components.dot
│ ├── files.md
│ └── template/
│ ├── customdoxygen.css
│ ├── doxy-boot.js
│ ├── footer.html
│ └── header.html
├── eez_psu_sketch/
│ ├── .gitignore
│ ├── actions.cpp
│ ├── actions.h
│ ├── adc.cpp
│ ├── adc.h
│ ├── arduino_psu.h
│ ├── arduino_util.cpp
│ ├── arduino_util.h
│ ├── board.cpp
│ ├── board.h
│ ├── bp.cpp
│ ├── bp.h
│ ├── buzzer.cpp
│ ├── buzzer.h
│ ├── calibration.cpp
│ ├── calibration.h
│ ├── channel.cpp
│ ├── channel.h
│ ├── channel_dispatcher.cpp
│ ├── channel_dispatcher.h
│ ├── conf.h
│ ├── conf_advanced.h
│ ├── conf_channel.h
│ ├── conf_user.h
│ ├── conf_user_revision.h
│ ├── dac.cpp
│ ├── dac.h
│ ├── datetime.cpp
│ ├── datetime.h
│ ├── debug.cpp
│ ├── debug.h
│ ├── devices.cpp
│ ├── devices.h
│ ├── dlog.cpp
│ ├── dlog.h
│ ├── eeprom.cpp
│ ├── eeprom.h
│ ├── eez_psu_sketch.ino
│ ├── eez_psu_sketch.sln
│ ├── eez_psu_sketch.vcxproj
│ ├── eez_psu_sketch.vcxproj.filters
│ ├── encoder.cpp
│ ├── encoder.h
│ ├── ethernet.cpp
│ ├── ethernet.h
│ ├── event_queue.cpp
│ ├── event_queue.h
│ ├── fan.cpp
│ ├── fan.h
│ ├── font.cpp
│ ├── font.h
│ ├── gesture.cpp
│ ├── gesture.h
│ ├── gui.cpp
│ ├── gui.h
│ ├── gui_calibration.cpp
│ ├── gui_calibration.h
│ ├── gui_data.cpp
│ ├── gui_data.h
│ ├── gui_document.cpp
│ ├── gui_document.h
│ ├── gui_edit_mode.cpp
│ ├── gui_edit_mode.h
│ ├── gui_edit_mode_keypad.cpp
│ ├── gui_edit_mode_keypad.h
│ ├── gui_edit_mode_slider.cpp
│ ├── gui_edit_mode_slider.h
│ ├── gui_edit_mode_step.cpp
│ ├── gui_edit_mode_step.h
│ ├── gui_internal.h
│ ├── gui_keypad.cpp
│ ├── gui_keypad.h
│ ├── gui_numeric_keypad.cpp
│ ├── gui_numeric_keypad.h
│ ├── gui_page.cpp
│ ├── gui_page.h
│ ├── gui_page_ch_settings_adv.cpp
│ ├── gui_page_ch_settings_adv.h
│ ├── gui_page_ch_settings_info.cpp
│ ├── gui_page_ch_settings_info.h
│ ├── gui_page_ch_settings_protection.cpp
│ ├── gui_page_ch_settings_protection.h
│ ├── gui_page_ch_settings_trigger.cpp
│ ├── gui_page_ch_settings_trigger.h
│ ├── gui_page_event_queue.cpp
│ ├── gui_page_event_queue.h
│ ├── gui_page_main.cpp
│ ├── gui_page_main.h
│ ├── gui_page_self_test_result.cpp
│ ├── gui_page_self_test_result.h
│ ├── gui_page_sys_info.cpp
│ ├── gui_page_sys_info.h
│ ├── gui_page_sys_settings.cpp
│ ├── gui_page_sys_settings.h
│ ├── gui_page_user_profiles.cpp
│ ├── gui_page_user_profiles.h
│ ├── gui_password.cpp
│ ├── gui_password.h
│ ├── gui_view.cpp
│ ├── gui_view.h
│ ├── gui_widget_button_group.cpp
│ ├── gui_widget_button_group.h
│ ├── idle.cpp
│ ├── idle.h
│ ├── io_pins.cpp
│ ├── io_pins.h
│ ├── ioexp.cpp
│ ├── ioexp.h
│ ├── lcd.cpp
│ ├── lcd.h
│ ├── list.cpp
│ ├── list.h
│ ├── ntp.cpp
│ ├── ntp.h
│ ├── ontime.cpp
│ ├── ontime.h
│ ├── persist_conf.cpp
│ ├── persist_conf.h
│ ├── pid.cpp
│ ├── pid.h
│ ├── profile.cpp
│ ├── profile.h
│ ├── psu.cpp
│ ├── psu.h
│ ├── rtc.cpp
│ ├── rtc.h
│ ├── scpi_appl.cpp
│ ├── scpi_cal.cpp
│ ├── scpi_commands.h
│ ├── scpi_core.cpp
│ ├── scpi_debug.cpp
│ ├── scpi_diag.cpp
│ ├── scpi_display.cpp
│ ├── scpi_dlog.cpp
│ ├── scpi_inst.cpp
│ ├── scpi_meas.cpp
│ ├── scpi_mem.cpp
│ ├── scpi_mmem.cpp
│ ├── scpi_outp.cpp
│ ├── scpi_params.cpp
│ ├── scpi_params.h
│ ├── scpi_psu.cpp
│ ├── scpi_psu.h
│ ├── scpi_regs.cpp
│ ├── scpi_regs.h
│ ├── scpi_sense.cpp
│ ├── scpi_simu.cpp
│ ├── scpi_sour.cpp
│ ├── scpi_stat.cpp
│ ├── scpi_syst.cpp
│ ├── scpi_trigger.cpp
│ ├── scpi_user_config.h
│ ├── sd_card.cpp
│ ├── sd_card.h
│ ├── serial_psu.cpp
│ ├── serial_psu.h
│ ├── sound.cpp
│ ├── sound.h
│ ├── temp_sensor.cpp
│ ├── temp_sensor.h
│ ├── temperature.cpp
│ ├── temperature.h
│ ├── timer.cpp
│ ├── timer.h
│ ├── touch.cpp
│ ├── touch.h
│ ├── touch_calibration.cpp
│ ├── touch_calibration.h
│ ├── touch_filter.cpp
│ ├── touch_filter.h
│ ├── trigger.cpp
│ ├── trigger.h
│ ├── util.cpp
│ ├── util.h
│ ├── value.cpp
│ ├── value.h
│ ├── watchdog.cpp
│ └── watchdog.h
├── fonts/
│ └── bdf/
│ ├── FontAwesome.14.bdf
│ ├── Oswald-Medium.14.bdf
│ ├── Oswald-Medium.24.bdf
│ ├── Oswald-Medium.38.bdf
│ ├── Oswald-Medium.48.bdf
│ ├── heydings_icons.14.bdf
│ ├── webhostinghub-glyphs.14.bdf
│ └── webhostinghub-glyphs.24.bdf
├── issue_template.md
├── libraries/
│ ├── eez_psu_lib/
│ │ ├── library.properties
│ │ └── src/
│ │ ├── R1B9/
│ │ │ ├── R1B9_init.cpp
│ │ │ └── R1B9_pins.h
│ │ ├── R3B4/
│ │ │ ├── R3B4_init.cpp
│ │ │ └── R3B4_pins.h
│ │ ├── R5B12/
│ │ │ ├── R5B12_init.cpp
│ │ │ └── R5B12_pins.h
│ │ ├── eez_psu.cpp
│ │ ├── eez_psu.h
│ │ └── eez_psu_rev.h
│ ├── readme.md
│ └── scpi-parser/
│ ├── library.properties
│ └── src/
│ ├── impl/
│ │ ├── error.c
│ │ ├── expression.c
│ │ ├── fifo.c
│ │ ├── fifo_private.h
│ │ ├── ieee488.c
│ │ ├── lexer.c
│ │ ├── lexer_private.h
│ │ ├── minimal.c
│ │ ├── parser.c
│ │ ├── parser_private.h
│ │ ├── scpi.g
│ │ ├── units.c
│ │ ├── utils.c
│ │ └── utils_private.h
│ ├── scpi/
│ │ ├── config.h
│ │ ├── constants.h
│ │ ├── error.h
│ │ ├── expression.h
│ │ ├── ieee488.h
│ │ ├── minimal.h
│ │ ├── parser.h
│ │ ├── scpi.h
│ │ ├── scpi_user_config.h
│ │ ├── types.h
│ │ ├── units.h
│ │ └── utils.h
│ └── scpi-parser.h
├── platformio.ini
├── psu.eez-project
├── readme.md
├── simulator/
│ ├── platform/
│ │ ├── linux/
│ │ │ ├── .gitignore
│ │ │ ├── Makefile
│ │ │ ├── src/
│ │ │ │ ├── ethernet_linux.cpp
│ │ │ │ └── main_loop.cpp
│ │ │ └── third_party/
│ │ │ ├── thread_queue.c
│ │ │ └── thread_queue.h
│ │ └── win32/
│ │ ├── .gitignore
│ │ ├── eez_imgui/
│ │ │ ├── .gitignore
│ │ │ ├── eez_imgui.sln
│ │ │ ├── eez_imgui.vcxproj
│ │ │ └── eez_imgui.vcxproj.filters
│ │ ├── eez_psu_sim/
│ │ │ ├── .gitignore
│ │ │ ├── eez_psu_sim.rc
│ │ │ ├── eez_psu_sim.vcxproj
│ │ │ ├── eez_psu_sim.vcxproj.filters
│ │ │ ├── ethernet_win32.cpp
│ │ │ ├── main_loop.cpp
│ │ │ └── resource.h
│ │ ├── eez_psu_sim.sln
│ │ ├── installation_script.iss
│ │ └── third_party/
│ │ ├── SDL2/
│ │ │ ├── BUGS.txt
│ │ │ ├── COPYING.txt
│ │ │ ├── README-SDL.txt
│ │ │ ├── README.txt
│ │ │ ├── WhatsNew.txt
│ │ │ └── include/
│ │ │ ├── SDL.h
│ │ │ ├── SDL_assert.h
│ │ │ ├── SDL_atomic.h
│ │ │ ├── SDL_audio.h
│ │ │ ├── SDL_bits.h
│ │ │ ├── SDL_blendmode.h
│ │ │ ├── SDL_clipboard.h
│ │ │ ├── SDL_config.h
│ │ │ ├── SDL_config.h.cmake
│ │ │ ├── SDL_config.h.in
│ │ │ ├── SDL_config_android.h
│ │ │ ├── SDL_config_iphoneos.h
│ │ │ ├── SDL_config_macosx.h
│ │ │ ├── SDL_config_minimal.h
│ │ │ ├── SDL_config_pandora.h
│ │ │ ├── SDL_config_psp.h
│ │ │ ├── SDL_config_windows.h
│ │ │ ├── SDL_config_winrt.h
│ │ │ ├── SDL_config_wiz.h
│ │ │ ├── SDL_copying.h
│ │ │ ├── SDL_cpuinfo.h
│ │ │ ├── SDL_egl.h
│ │ │ ├── SDL_endian.h
│ │ │ ├── SDL_error.h
│ │ │ ├── SDL_events.h
│ │ │ ├── SDL_filesystem.h
│ │ │ ├── SDL_gamecontroller.h
│ │ │ ├── SDL_gesture.h
│ │ │ ├── SDL_haptic.h
│ │ │ ├── SDL_hints.h
│ │ │ ├── SDL_joystick.h
│ │ │ ├── SDL_keyboard.h
│ │ │ ├── SDL_keycode.h
│ │ │ ├── SDL_loadso.h
│ │ │ ├── SDL_log.h
│ │ │ ├── SDL_main.h
│ │ │ ├── SDL_messagebox.h
│ │ │ ├── SDL_mouse.h
│ │ │ ├── SDL_mutex.h
│ │ │ ├── SDL_name.h
│ │ │ ├── SDL_opengl.h
│ │ │ ├── SDL_opengles.h
│ │ │ ├── SDL_opengles2.h
│ │ │ ├── SDL_pixels.h
│ │ │ ├── SDL_platform.h
│ │ │ ├── SDL_power.h
│ │ │ ├── SDL_quit.h
│ │ │ ├── SDL_rect.h
│ │ │ ├── SDL_render.h
│ │ │ ├── SDL_revision.h
│ │ │ ├── SDL_rwops.h
│ │ │ ├── SDL_scancode.h
│ │ │ ├── SDL_shape.h
│ │ │ ├── SDL_stdinc.h
│ │ │ ├── SDL_surface.h
│ │ │ ├── SDL_system.h
│ │ │ ├── SDL_syswm.h
│ │ │ ├── SDL_test.h
│ │ │ ├── SDL_test_assert.h
│ │ │ ├── SDL_test_common.h
│ │ │ ├── SDL_test_compare.h
│ │ │ ├── SDL_test_crc32.h
│ │ │ ├── SDL_test_font.h
│ │ │ ├── SDL_test_fuzzer.h
│ │ │ ├── SDL_test_harness.h
│ │ │ ├── SDL_test_images.h
│ │ │ ├── SDL_test_log.h
│ │ │ ├── SDL_test_md5.h
│ │ │ ├── SDL_test_random.h
│ │ │ ├── SDL_thread.h
│ │ │ ├── SDL_timer.h
│ │ │ ├── SDL_touch.h
│ │ │ ├── SDL_types.h
│ │ │ ├── SDL_version.h
│ │ │ ├── SDL_video.h
│ │ │ ├── begin_code.h
│ │ │ ├── close_code.h
│ │ │ └── doxyfile
│ │ ├── SDL2_image/
│ │ │ ├── CHANGES.txt
│ │ │ ├── COPYING.txt
│ │ │ ├── README.txt
│ │ │ └── include/
│ │ │ └── SDL_image.h
│ │ └── SDL2_ttf/
│ │ ├── CHANGES.txt
│ │ ├── COPYING.txt
│ │ ├── README.txt
│ │ └── include/
│ │ └── SDL_ttf.h
│ ├── readme.md
│ └── src/
│ ├── arduino/
│ │ ├── Arduino.h
│ │ ├── SPI.h
│ │ ├── SdFat.cpp
│ │ ├── SdFat.h
│ │ ├── UTFT.cpp
│ │ ├── UTFT.h
│ │ ├── arduino_impl.cpp
│ │ └── arduino_internal.h
│ ├── chips/
│ │ ├── chips.cpp
│ │ └── chips.h
│ ├── dll.h
│ ├── ethernet/
│ │ ├── EthernetUdp2.cpp
│ │ ├── EthernetUdp2.h
│ │ ├── UIPClient.h
│ │ ├── UIPEthernet.h
│ │ ├── UIPServer.h
│ │ ├── ethernet_platform.h
│ │ └── uipethernet_impl.cpp
│ ├── front_panel/
│ │ ├── control.cpp
│ │ ├── control.h
│ │ ├── data.cpp
│ │ ├── data.h
│ │ ├── render.cpp
│ │ └── render.h
│ ├── imgui/
│ │ ├── beeper.cpp
│ │ ├── beeper.h
│ │ ├── texture.cpp
│ │ ├── texture.h
│ │ ├── window.cpp
│ │ ├── window.h
│ │ └── window_impl.h
│ ├── main.cpp
│ ├── main_loop.h
│ ├── simulator_conf.h
│ ├── simulator_psu.cpp
│ ├── simulator_psu.h
│ └── thread.h
└── sketch_build.bat
================================================
FILE CONTENTS
================================================
================================================
FILE: .gitignore
================================================
*.pyc
doc/html
.vscode
simulator/platform/win32/eez_psu_sim.VC.db
*.opendb
*.eez-studio-cache
psu.eez-project-ui-state
.pioenvs
.piolibdeps
.vscode/c_cpp_properties.json
.travis.yml
lib/readme.txt
.clang_complete
.gcc-flags.json
psu-extensions.eez-project-ui-state
================================================
FILE: CONTRIB.TXT
================================================
You must attempt to send the modified documentation by email to any of the developers who have provided their email address in the list below. This is a good faith obligation - if the email fails, you need do nothing more and may go on with your distribution.
If you wish to be notified of modifications that others may make, include your email address in this file.
-----BEGINING OF THE MAILING LIST-----
Name - email
------------
Envox d.o.o. - eez@envox.hr
-----END OF THE MAILING LIST-----
================================================
FILE: LICENSE.TXT
================================================
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for
software and other kinds of works.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users. We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors. You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights. Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive
or can get the source code. And you must show them these terms so they
know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software. For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.
Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so. This is fundamentally incompatible with the aim of
protecting users' freedom to change the software. The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable. Therefore, we
have designed this version of the GPL to prohibit the practice for those
products. If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary. To prevent this, the GPL assures that
patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:
<program> Copyright (C) <year> <name of author>
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.
The GNU General Public License does not permit incorporating your program
into proprietary programs. If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License. But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.
================================================
FILE: build-arduino-library.py
================================================
from __future__ import (print_function)
'''
EEZ PSU Firmware
Copyright (C) 2015 Envox d.o.o.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
'''
'''
This script creates scpi-parser library that is compatible with Arduino IDE.
As a convinience, it also copies a newly create library into arduino libraries
directory so any Arduino sketch can see it.
Execute this script if scpi-parser is changed or scpi_user_config.h (from this directory) is changed.
'''
import os
import platform
import sys
import shutil
def rm_then_cp(src, dest, ignoreRootDirs=None):
def copytreeIgnore(d, files):
if ignoreRootDirs is not None:
if d == src:
return ignoreRootDirs
return []
if os.path.exists(dest):
shutil.rmtree(dest)
shutil.copytree(src, dest, ignore=copytreeIgnore)
def build_scpi_parser_lib(libscpi_dir, scpi_parser_dir):
'''
Build scpi-parser as arduino compatible library
'''
# copy *.h files
rm_then_cp(os.path.join(libscpi_dir, 'inc/scpi'), os.path.join(scpi_parser_dir, 'src/scpi'))
# modify config.h
config_h_file_path = os.path.join(scpi_parser_dir, 'src/scpi/config.h')
config_h_file = open(config_h_file_path)
tmp_file_path = config_h_file_path + ".tmp"
tmp_file = open(tmp_file_path, "w")
for line in config_h_file:
if line == '#ifdef SCPI_USER_CONFIG\n':
tmp_file.write('// This is automatically added by the build-arduino-library.py\n')
tmp_file.write('#define SCPI_USER_CONFIG 1\n')
tmp_file.write('\n')
tmp_file.write(line)
config_h_file.close()
tmp_file.close()
os.unlink(config_h_file_path)
os.rename(tmp_file_path, config_h_file_path)
# copy scpi_user_config.h
shutil.copyfile(os.path.join(os.path.dirname(__file__), 'eez_psu_sketch/scpi_user_config.h'), os.path.join(scpi_parser_dir, 'src/scpi/scpi_user_config.h'))
# copy *.c files
rm_then_cp(os.path.join(libscpi_dir, 'src'), os.path.join(scpi_parser_dir, 'src/impl'))
def build_UIPEthernet_lib(arduino_uip_dir, UIPEthernet_dir):
rm_then_cp(os.path.join(arduino_uip_dir, 'UIPEthernet'), UIPEthernet_dir, ['examples'])
def build_Ethernet2_lib(arduino_Ethernet2_dir, Ethernet2_dir):
rm_then_cp(arduino_Ethernet2_dir, Ethernet2_dir, ['.git', '.github', 'examples'])
def copy_lib(src_lib_dir, dst_name):
#
# find arduino libraries directory
#
ARDUINO_LIB_DIR_CANDIDATES = {
'Linux': ['Arduino/libraries/', 'Documents/Arduino/libraries/'],
'Darwin': ['Documents/Arduino/libraries/'],
'Windows': ['Documents\\Arduino\\libraries\\', 'My Documents\\Arduino\\libraries\\']
}
home_dir = os.path.expanduser('~')
arduino_libs_dir = None
candidates = ARDUINO_LIB_DIR_CANDIDATES.get(platform.system())
if candidates:
for candidate_dir in ARDUINO_LIB_DIR_CANDIDATES.get(platform.system()):
arduino_libs_dir = os.path.join(home_dir, candidate_dir)
if os.path.exists(arduino_libs_dir):
break
if arduino_libs_dir:
# copy arduino scpi-parser library to the arduino libraries folder
rm_then_cp(src_lib_dir, os.path.join(arduino_libs_dir, dst_name))
return True
else:
print("Arduino libraries directory not found!")
return False
if __name__ == "__main__":
libscpi_dir = os.path.join(os.path.dirname(__file__), '../../libscpi')
scpi_parser_dir = os.path.join(os.path.dirname(__file__), 'scpi-parser')
build_scpi_parser_lib(libscpi_dir, scpi_parser_dir)
copy_lib(scpi_parser_dir, 'scpi-parser')
================================================
FILE: build.py
================================================
'''
EEZ PSU Firmware
Copyright (C) 2015 Envox d.o.o.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
'''
import os
build_arduino_library = __import__("build-arduino-library")
# scpi-parser
libscpi_dir = os.path.join(os.path.dirname(__file__), '../libraries/scpi-parser/libscpi')
scpi_parser_dir = os.path.join(os.path.dirname(__file__), 'libraries/scpi-parser')
build_arduino_library.build_scpi_parser_lib(libscpi_dir, scpi_parser_dir)
build_arduino_library.copy_lib(scpi_parser_dir, 'scpi-parser')
# eez_psu_lib
eez_psu_lib_dir = os.path.join(os.path.dirname(__file__), 'libraries/eez_psu_lib')
build_arduino_library.copy_lib(eez_psu_lib_dir, 'eez_psu_lib')
================================================
FILE: doc/Doxyfile
================================================
# Doxyfile 1.8.10
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
#
# All text after a double hash (##) is considered a comment and is placed in
# front of the TAG it is preceding.
#
# All text after a single hash (#) is considered a comment and will be ignored.
# The format is:
# TAG = value [value, ...]
# For lists, items can also be appended using:
# TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (\" \").
#---------------------------------------------------------------------------
# Project related configuration options
#---------------------------------------------------------------------------
# This tag specifies the encoding used for all characters in the config file
# that follow. The default is UTF-8 which is also the encoding used for all text
# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
# for the list of possible encodings.
# The default value is: UTF-8.
DOXYFILE_ENCODING = UTF-8
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
# double-quotes, unless you are using Doxywizard) that should identify the
# project for which the documentation is generated. This name is used in the
# title of most generated pages and in a few other places.
# The default value is: My Project.
PROJECT_NAME = Firmware
# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
# could be handy for archiving the generated documentation or if some version
# control system is used.
PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer a
# quick idea about the purpose of the project. Keep the description short.
PROJECT_BRIEF =
# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
# in the documentation. The maximum height of the logo should not exceed 55
# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
# the logo to the output directory.
PROJECT_LOGO = template/eez_logo.png
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
# into which the generated documentation will be written. If a relative path is
# entered, it will be relative to the location where doxygen was started. If
# left blank the current directory will be used.
OUTPUT_DIRECTORY = .
# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
# directories (in 2 levels) under the output directory of each output format and
# will distribute the generated files over these directories. Enabling this
# option can be useful when feeding doxygen a huge amount of source files, where
# putting all generated files in the same directory would otherwise causes
# performance problems for the file system.
# The default value is: NO.
CREATE_SUBDIRS = NO
# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
# characters to appear in the names of generated files. If set to NO, non-ASCII
# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
# U+3044.
# The default value is: NO.
ALLOW_UNICODE_NAMES = NO
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
# documentation generated by doxygen is written. Doxygen will use this
# information to generate all constant output in the proper language.
# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
# Ukrainian and Vietnamese.
# The default value is: English.
OUTPUT_LANGUAGE = English
# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
# descriptions after the members that are listed in the file and class
# documentation (similar to Javadoc). Set to NO to disable this.
# The default value is: YES.
BRIEF_MEMBER_DESC = YES
# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
# description of a member or function before the detailed description
#
# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
# brief descriptions will be completely suppressed.
# The default value is: YES.
REPEAT_BRIEF = YES
# This tag implements a quasi-intelligent brief description abbreviator that is
# used to form the text in various listings. Each string in this list, if found
# as the leading text of the brief description, will be stripped from the text
# and the result, after processing the whole list, is used as the annotated
# text. Otherwise, the brief description is used as-is. If left blank, the
# following values are used ($name is automatically replaced with the name of
# the entity):The $name class, The $name widget, The $name file, is, provides,
# specifies, contains, represents, a, an and the.
ABBREVIATE_BRIEF = "The $name class" \
"The $name widget" \
"The $name file" \
is \
provides \
specifies \
contains \
represents \
a \
an \
the
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
# doxygen will generate a detailed section even if there is only a brief
# description.
# The default value is: NO.
ALWAYS_DETAILED_SEC = NO
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
# inherited members of a class in the documentation of that class as if those
# members were ordinary class members. Constructors, destructors and assignment
# operators of the base classes will not be shown.
# The default value is: NO.
INLINE_INHERITED_MEMB = NO
# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
# before files name in the file list and in the header files. If set to NO the
# shortest path that makes the file name unique will be used
# The default value is: YES.
FULL_PATH_NAMES = YES
# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
# Stripping is only done if one of the specified strings matches the left-hand
# part of the path. The tag can be used to show relative paths in the file list.
# If left blank the directory from which doxygen is run is used as the path to
# strip.
#
# Note that you can specify absolute paths here, but also relative paths, which
# will be relative from the directory where doxygen is started.
# This tag requires that the tag FULL_PATH_NAMES is set to YES.
STRIP_FROM_PATH =
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
# path mentioned in the documentation of a class, which tells the reader which
# header file to include in order to use a class. If left blank only the name of
# the header file containing the class definition is used. Otherwise one should
# specify the list of include paths that are normally passed to the compiler
# using the -I flag.
STRIP_FROM_INC_PATH =
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
# less readable) file names. This can be useful is your file systems doesn't
# support long names like on DOS, Mac, or CD-ROM.
# The default value is: NO.
SHORT_NAMES = NO
# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
# first line (until the first dot) of a Javadoc-style comment as the brief
# description. If set to NO, the Javadoc-style will behave just like regular Qt-
# style comments (thus requiring an explicit @brief command for a brief
# description.)
# The default value is: NO.
JAVADOC_AUTOBRIEF = YES
# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
# line (until the first dot) of a Qt-style comment as the brief description. If
# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
# requiring an explicit \brief command for a brief description.)
# The default value is: NO.
QT_AUTOBRIEF = NO
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
# a brief description. This used to be the default behavior. The new default is
# to treat a multi-line C++ comment block as a detailed description. Set this
# tag to YES if you prefer the old behavior instead.
#
# Note that setting this tag to YES also means that rational rose comments are
# not recognized any more.
# The default value is: NO.
MULTILINE_CPP_IS_BRIEF = NO
# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
# documentation from any documented member that it re-implements.
# The default value is: YES.
INHERIT_DOCS = YES
# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
# page for each member. If set to NO, the documentation of a member will be part
# of the file/class/namespace that contains it.
# The default value is: NO.
SEPARATE_MEMBER_PAGES = NO
# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
# uses this value to replace tabs by spaces in code fragments.
# Minimum value: 1, maximum value: 16, default value: 4.
TAB_SIZE = 4
# This tag can be used to specify a number of aliases that act as commands in
# the documentation. An alias has the form:
# name=value
# For example adding
# "sideeffect=@par Side Effects:\n"
# will allow you to put the command \sideeffect (or @sideeffect) in the
# documentation, which will result in a user-defined paragraph with heading
# "Side Effects:". You can put \n's in the value part of an alias to insert
# newlines.
ALIASES =
# This tag can be used to specify a number of word-keyword mappings (TCL only).
# A mapping has the form "name=value". For example adding "class=itcl::class"
# will allow you to use the command class in the itcl::class meaning.
TCL_SUBST =
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
# only. Doxygen will then generate output that is more tailored for C. For
# instance, some of the names that are used will be different. The list of all
# members will be omitted, etc.
# The default value is: NO.
OPTIMIZE_OUTPUT_FOR_C = NO
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
# Python sources only. Doxygen will then generate output that is more tailored
# for that language. For instance, namespaces will be presented as packages,
# qualified scopes will look different, etc.
# The default value is: NO.
OPTIMIZE_OUTPUT_JAVA = NO
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
# sources. Doxygen will then generate output that is tailored for Fortran.
# The default value is: NO.
OPTIMIZE_FOR_FORTRAN = NO
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
# sources. Doxygen will then generate output that is tailored for VHDL.
# The default value is: NO.
OPTIMIZE_OUTPUT_VHDL = NO
# Doxygen selects the parser to use depending on the extension of the files it
# parses. With this tag you can assign which parser to use for a given
# extension. Doxygen has a built-in mapping, but you can override or extend it
# using this tag. The format is ext=language, where ext is a file extension, and
# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
# Fortran. In the later case the parser tries to guess whether the code is fixed
# or free formatted code, this is the default for Fortran type files), VHDL. For
# instance to make doxygen treat .inc files as Fortran files (default is PHP),
# and .f files as C (default is Fortran), use: inc=Fortran f=C.
#
# Note: For files without extension you can use no_extension as a placeholder.
#
# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
# the files are not read by doxygen.
EXTENSION_MAPPING =
# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
# according to the Markdown format, which allows for more readable
# documentation. See http://daringfireball.net/projects/markdown/ for details.
# The output of markdown processing is further processed by doxygen, so you can
# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
# case of backward compatibilities issues.
# The default value is: YES.
MARKDOWN_SUPPORT = YES
# When enabled doxygen tries to link words that correspond to documented
# classes, or namespaces to their corresponding documentation. Such a link can
# be prevented in individual cases by putting a % sign in front of the word or
# globally by setting AUTOLINK_SUPPORT to NO.
# The default value is: YES.
AUTOLINK_SUPPORT = YES
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
# to include (a tag file for) the STL sources as input, then you should set this
# tag to YES in order to let doxygen match functions declarations and
# definitions whose arguments contain STL classes (e.g. func(std::string);
# versus func(std::string) {}). This also make the inheritance and collaboration
# diagrams that involve STL classes more complete and accurate.
# The default value is: NO.
BUILTIN_STL_SUPPORT = NO
# If you use Microsoft's C++/CLI language, you should set this option to YES to
# enable parsing support.
# The default value is: NO.
CPP_CLI_SUPPORT = NO
# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
# will parse them like normal C++ but will assume all classes use public instead
# of private inheritance when no explicit protection keyword is present.
# The default value is: NO.
SIP_SUPPORT = NO
# For Microsoft's IDL there are propget and propput attributes to indicate
# getter and setter methods for a property. Setting this option to YES will make
# doxygen to replace the get and set methods by a property in the documentation.
# This will only work if the methods are indeed getting or setting a simple
# type. If this is not the case, or you want to show the methods anyway, you
# should set this option to NO.
# The default value is: YES.
IDL_PROPERTY_SUPPORT = YES
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
# tag is set to YES then doxygen will reuse the documentation of the first
# member in the group (if any) for the other members of the group. By default
# all members of a group must be documented explicitly.
# The default value is: NO.
DISTRIBUTE_GROUP_DOC = NO
# If one adds a struct or class to a group and this option is enabled, then also
# any nested class or struct is added to the same group. By default this option
# is disabled and one has to add nested compounds explicitly via \ingroup.
# The default value is: NO.
GROUP_NESTED_COMPOUNDS = NO
# Set the SUBGROUPING tag to YES to allow class member groups of the same type
# (for instance a group of public functions) to be put as a subgroup of that
# type (e.g. under the Public Functions section). Set it to NO to prevent
# subgrouping. Alternatively, this can be done per class using the
# \nosubgrouping command.
# The default value is: YES.
SUBGROUPING = YES
# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
# are shown inside the group in which they are included (e.g. using \ingroup)
# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
# and RTF).
#
# Note that this feature does not work in combination with
# SEPARATE_MEMBER_PAGES.
# The default value is: NO.
INLINE_GROUPED_CLASSES = NO
# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
# with only public data fields or simple typedef fields will be shown inline in
# the documentation of the scope in which they are defined (i.e. file,
# namespace, or group documentation), provided this scope is documented. If set
# to NO, structs, classes, and unions are shown on a separate page (for HTML and
# Man pages) or section (for LaTeX and RTF).
# The default value is: NO.
INLINE_SIMPLE_STRUCTS = NO
# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
# enum is documented as struct, union, or enum with the name of the typedef. So
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
# with name TypeT. When disabled the typedef will appear as a member of a file,
# namespace, or class. And the struct will be named TypeS. This can typically be
# useful for C code in case the coding convention dictates that all compound
# types are typedef'ed and only the typedef is referenced, never the tag name.
# The default value is: NO.
TYPEDEF_HIDES_STRUCT = NO
# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
# cache is used to resolve symbols given their name and scope. Since this can be
# an expensive process and often the same symbol appears multiple times in the
# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
# doxygen will become slower. If the cache is too large, memory is wasted. The
# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
# symbols. At the end of a run doxygen will report the cache usage and suggest
# the optimal cache size from a speed point of view.
# Minimum value: 0, maximum value: 9, default value: 0.
LOOKUP_CACHE_SIZE = 0
#---------------------------------------------------------------------------
# Build related configuration options
#---------------------------------------------------------------------------
# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
# documentation are documented, even if no documentation was available. Private
# class members and static file members will be hidden unless the
# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
# Note: This will also disable the warnings about undocumented members that are
# normally produced when WARNINGS is set to YES.
# The default value is: NO.
EXTRACT_ALL = NO
# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
# be included in the documentation.
# The default value is: NO.
EXTRACT_PRIVATE = NO
# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
# scope will be included in the documentation.
# The default value is: NO.
EXTRACT_PACKAGE = NO
# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
# included in the documentation.
# The default value is: NO.
EXTRACT_STATIC = NO
# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
# locally in source files will be included in the documentation. If set to NO,
# only classes defined in header files are included. Does not have any effect
# for Java sources.
# The default value is: YES.
EXTRACT_LOCAL_CLASSES = YES
# This flag is only useful for Objective-C code. If set to YES, local methods,
# which are defined in the implementation section but not in the interface are
# included in the documentation. If set to NO, only methods in the interface are
# included.
# The default value is: NO.
EXTRACT_LOCAL_METHODS = NO
# If this flag is set to YES, the members of anonymous namespaces will be
# extracted and appear in the documentation as a namespace called
# 'anonymous_namespace{file}', where file will be replaced with the base name of
# the file that contains the anonymous namespace. By default anonymous namespace
# are hidden.
# The default value is: NO.
EXTRACT_ANON_NSPACES = NO
# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
# undocumented members inside documented classes or files. If set to NO these
# members will be included in the various overviews, but no documentation
# section is generated. This option has no effect if EXTRACT_ALL is enabled.
# The default value is: NO.
HIDE_UNDOC_MEMBERS = NO
# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy. If set
# to NO, these classes will be included in the various overviews. This option
# has no effect if EXTRACT_ALL is enabled.
# The default value is: NO.
HIDE_UNDOC_CLASSES = NO
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
# (class|struct|union) declarations. If set to NO, these declarations will be
# included in the documentation.
# The default value is: NO.
HIDE_FRIEND_COMPOUNDS = NO
# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
# documentation blocks found inside the body of a function. If set to NO, these
# blocks will be appended to the function's detailed documentation block.
# The default value is: NO.
HIDE_IN_BODY_DOCS = NO
# The INTERNAL_DOCS tag determines if documentation that is typed after a
# \internal command is included. If the tag is set to NO then the documentation
# will be excluded. Set it to YES to include the internal documentation.
# The default value is: NO.
INTERNAL_DOCS = NO
# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
# names in lower-case letters. If set to YES, upper-case letters are also
# allowed. This is useful if you have classes or files whose names only differ
# in case and if your file system supports case sensitive file names. Windows
# and Mac users are advised to set this option to NO.
# The default value is: system dependent.
CASE_SENSE_NAMES = NO
# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
# their full class and namespace scopes in the documentation. If set to YES, the
# scope will be hidden.
# The default value is: NO.
HIDE_SCOPE_NAMES = NO
# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
# append additional text to a page's title, such as Class Reference. If set to
# YES the compound reference will be hidden.
# The default value is: NO.
HIDE_COMPOUND_REFERENCE= NO
# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
# the files that are included by a file in the documentation of that file.
# The default value is: YES.
SHOW_INCLUDE_FILES = YES
# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
# grouped member an include statement to the documentation, telling the reader
# which file to include in order to use the member.
# The default value is: NO.
SHOW_GROUPED_MEMB_INC = NO
# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
# files with double quotes in the documentation rather than with sharp brackets.
# The default value is: NO.
FORCE_LOCAL_INCLUDES = NO
# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
# documentation for inline members.
# The default value is: YES.
INLINE_INFO = YES
# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
# (detailed) documentation of file and class members alphabetically by member
# name. If set to NO, the members will appear in declaration order.
# The default value is: YES.
SORT_MEMBER_DOCS = YES
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
# descriptions of file, namespace and class members alphabetically by member
# name. If set to NO, the members will appear in declaration order. Note that
# this will also influence the order of the classes in the class list.
# The default value is: NO.
SORT_BRIEF_DOCS = NO
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
# (brief and detailed) documentation of class members so that constructors and
# destructors are listed first. If set to NO the constructors will appear in the
# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
# member documentation.
# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
# detailed member documentation.
# The default value is: NO.
SORT_MEMBERS_CTORS_1ST = NO
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
# of group names into alphabetical order. If set to NO the group names will
# appear in their defined order.
# The default value is: NO.
SORT_GROUP_NAMES = NO
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
# fully-qualified names, including namespaces. If set to NO, the class list will
# be sorted only by class name, not including the namespace part.
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
# Note: This option applies only to the class list, not to the alphabetical
# list.
# The default value is: NO.
SORT_BY_SCOPE_NAME = NO
# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
# type resolution of all parameters of a function it will reject a match between
# the prototype and the implementation of a member function even if there is
# only one candidate or it is obvious which candidate to choose by doing a
# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
# accept a match between prototype and implementation in such cases.
# The default value is: NO.
STRICT_PROTO_MATCHING = NO
# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
# list. This list is created by putting \todo commands in the documentation.
# The default value is: YES.
GENERATE_TODOLIST = YES
# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
# list. This list is created by putting \test commands in the documentation.
# The default value is: YES.
GENERATE_TESTLIST = YES
# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
# list. This list is created by putting \bug commands in the documentation.
# The default value is: YES.
GENERATE_BUGLIST = YES
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
# the deprecated list. This list is created by putting \deprecated commands in
# the documentation.
# The default value is: YES.
GENERATE_DEPRECATEDLIST= YES
# The ENABLED_SECTIONS tag can be used to enable conditional documentation
# sections, marked by \if <section_label> ... \endif and \cond <section_label>
# ... \endcond blocks.
ENABLED_SECTIONS =
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
# initial value of a variable or macro / define can have for it to appear in the
# documentation. If the initializer consists of more lines than specified here
# it will be hidden. Use a value of 0 to hide initializers completely. The
# appearance of the value of individual variables and macros / defines can be
# controlled using \showinitializer or \hideinitializer command in the
# documentation regardless of this setting.
# Minimum value: 0, maximum value: 10000, default value: 30.
MAX_INITIALIZER_LINES = 30
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
# the bottom of the documentation of classes and structs. If set to YES, the
# list will mention the files that were used to generate the documentation.
# The default value is: YES.
SHOW_USED_FILES = YES
# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
# will remove the Files entry from the Quick Index and from the Folder Tree View
# (if specified).
# The default value is: YES.
SHOW_FILES = YES
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
# page. This will remove the Namespaces entry from the Quick Index and from the
# Folder Tree View (if specified).
# The default value is: YES.
SHOW_NAMESPACES = YES
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
# doxygen should invoke to get the current version for each file (typically from
# the version control system). Doxygen will invoke the program by executing (via
# popen()) the command command input-file, where command is the value of the
# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
# by doxygen. Whatever the program writes to standard output is used as the file
# version. For an example see the documentation.
FILE_VERSION_FILTER =
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
# by doxygen. The layout file controls the global structure of the generated
# output files in an output format independent way. To create the layout file
# that represents doxygen's defaults, run doxygen with the -l option. You can
# optionally specify a file name after the option, if omitted DoxygenLayout.xml
# will be used as the name of the layout file.
#
# Note that if you run doxygen from a directory containing a file called
# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
# tag is left empty.
LAYOUT_FILE =
# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
# the reference definitions. This must be a list of .bib files. The .bib
# extension is automatically appended if omitted. This requires the bibtex tool
# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
# For LaTeX the style of the bibliography can be controlled using
# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
# search path. See also \cite for info how to create references.
CITE_BIB_FILES =
#---------------------------------------------------------------------------
# Configuration options related to warning and progress messages
#---------------------------------------------------------------------------
# The QUIET tag can be used to turn on/off the messages that are generated to
# standard output by doxygen. If QUIET is set to YES this implies that the
# messages are off.
# The default value is: NO.
QUIET = NO
# The WARNINGS tag can be used to turn on/off the warning messages that are
# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
# this implies that the warnings are on.
#
# Tip: Turn warnings on while writing the documentation.
# The default value is: YES.
WARNINGS = YES
# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
# will automatically be disabled.
# The default value is: YES.
WARN_IF_UNDOCUMENTED = YES
# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
# potential errors in the documentation, such as not documenting some parameters
# in a documented function, or documenting parameters that don't exist or using
# markup commands wrongly.
# The default value is: YES.
WARN_IF_DOC_ERROR = YES
# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
# are documented, but have no documentation for their parameters or return
# value. If set to NO, doxygen will only warn about wrong or incomplete
# parameter documentation, but not about the absence of documentation.
# The default value is: NO.
WARN_NO_PARAMDOC = NO
# The WARN_FORMAT tag determines the format of the warning messages that doxygen
# can produce. The string should contain the $file, $line, and $text tags, which
# will be replaced by the file and line number from which the warning originated
# and the warning text. Optionally the format may contain $version, which will
# be replaced by the version of the file (if it could be obtained via
# FILE_VERSION_FILTER)
# The default value is: $file:$line: $text.
WARN_FORMAT = "$file:$line: $text"
# The WARN_LOGFILE tag can be used to specify a file to which warning and error
# messages should be written. If left blank the output is written to standard
# error (stderr).
WARN_LOGFILE =
#---------------------------------------------------------------------------
# Configuration options related to the input files
#---------------------------------------------------------------------------
# The INPUT tag is used to specify the files and/or directories that contain
# documented source files. You may enter file names like myfile.cpp or
# directories like /usr/src/myproject. Separate the files or directories with
# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
# Note: If this tag is empty the current directory is searched.
INPUT = .. \
../readme.md \
files.md \
../eez_psu_sketch/eez_psu_sketch.ino
# This tag can be used to specify the character encoding of the source files
# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
# documentation (see: http://www.gnu.org/software/libiconv) for the list of
# possible encodings.
# The default value is: UTF-8.
INPUT_ENCODING = UTF-8
# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
# *.h) to filter out the source-files in the directories.
#
# Note that for custom extensions or not directly supported extensions you also
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
# read by doxygen.
#
# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd,
# *.vhdl, *.ucf, *.qsf, *.as and *.js.
FILE_PATTERNS = *.cpp \
*.h
# The RECURSIVE tag can be used to specify whether or not subdirectories should
# be searched for input files as well.
# The default value is: NO.
RECURSIVE = YES
# The EXCLUDE tag can be used to specify files and/or directories that should be
# excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag.
#
# Note that relative paths are relative to the directory from which doxygen is
# run.
EXCLUDE = ../libraries/scpi-parser \
../simulator/platform/linux/third_party \
"../eez_psu_sketch/Visual Micro" \
../build.py \
../build-arduino-library.py \
../eez_psu_sketch/.vs \
../eez_psu_sketch/__vm \
"../eez_psu_sketch/Visual Micro" \
html \
template \
../libraries/UIPEthernet \
../simulator/platform/win32/third_party \
../libraries/Ethernet2 \
../libraries/UTFT_Pro
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded
# from the input.
# The default value is: NO.
EXCLUDE_SYMLINKS = NO
# If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
# certain files from those directories.
#
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories for example use the pattern */test/*
EXCLUDE_PATTERNS =
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# (namespaces, classes, functions, etc.) that should be excluded from the
# output. The symbol name can be a fully qualified name, a word, or if the
# wildcard * is used, a substring. Examples: ANamespace, AClass,
# AClass::ANamespace, ANamespace::*Test
#
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories use the pattern */test/*
EXCLUDE_SYMBOLS =
# The EXAMPLE_PATH tag can be used to specify one or more files or directories
# that contain example code fragments that are included (see the \include
# command).
EXAMPLE_PATH =
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
# *.h) to filter out the source-files in the directories. If left blank all
# files are included.
EXAMPLE_PATTERNS = *
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
# searched for input files to be used with the \include or \dontinclude commands
# irrespective of the value of the RECURSIVE tag.
# The default value is: NO.
EXAMPLE_RECURSIVE = NO
# The IMAGE_PATH tag can be used to specify one or more files or directories
# that contain images that are to be included in the documentation (see the
# \image command).
IMAGE_PATH = ..
# The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
# by executing (via popen()) the command:
#
# <filter> <input-file>
#
# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
# name of an input file. Doxygen will then use the output that the filter
# program writes to standard output. If FILTER_PATTERNS is specified, this tag
# will be ignored.
#
# Note that the filter must not add or remove lines; it is applied before the
# code is scanned, but not when the output code is generated. If lines are added
# or removed, the anchors will not be placed correctly.
INPUT_FILTER =
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
# basis. Doxygen will compare the file name with each pattern and apply the
# filter if there is a match. The filters are a list of the form: pattern=filter
# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
# patterns match the file name, INPUT_FILTER is applied.
FILTER_PATTERNS =
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
# INPUT_FILTER) will also be used to filter the input files that are used for
# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
# The default value is: NO.
FILTER_SOURCE_FILES = NO
# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
# it is also possible to disable source filtering for a specific pattern using
# *.ext= (so without naming a filter).
# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
FILTER_SOURCE_PATTERNS =
# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
# is part of the input, its contents will be placed on the main page
# (index.html). This can be useful if you have a project on for instance GitHub
# and want to reuse the introduction page also for the doxygen output.
USE_MDFILE_AS_MAINPAGE = ../readme.md
#---------------------------------------------------------------------------
# Configuration options related to source browsing
#---------------------------------------------------------------------------
# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
# generated. Documented entities will be cross-referenced with these sources.
#
# Note: To get rid of all source code in the generated output, make sure that
# also VERBATIM_HEADERS is set to NO.
# The default value is: NO.
SOURCE_BROWSER = NO
# Setting the INLINE_SOURCES tag to YES will include the body of functions,
# classes and enums directly into the documentation.
# The default value is: NO.
INLINE_SOURCES = NO
# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
# special comment blocks from generated source code fragments. Normal C, C++ and
# Fortran comments will always remain visible.
# The default value is: YES.
STRIP_CODE_COMMENTS = YES
# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
# function all documented functions referencing it will be listed.
# The default value is: NO.
REFERENCED_BY_RELATION = NO
# If the REFERENCES_RELATION tag is set to YES then for each documented function
# all documented entities called/used by that function will be listed.
# The default value is: NO.
REFERENCES_RELATION = NO
# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
# to YES then the hyperlinks from functions in REFERENCES_RELATION and
# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
# link to the documentation.
# The default value is: YES.
REFERENCES_LINK_SOURCE = YES
# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
# source code will show a tooltip with additional information such as prototype,
# brief description and links to the definition and documentation. Since this
# will make the HTML file larger and loading of large files a bit slower, you
# can opt to disable this feature.
# The default value is: YES.
# This tag requires that the tag SOURCE_BROWSER is set to YES.
SOURCE_TOOLTIPS = YES
# If the USE_HTAGS tag is set to YES then the references to source code will
# point to the HTML generated by the htags(1) tool instead of doxygen built-in
# source browser. The htags tool is part of GNU's global source tagging system
# (see http://www.gnu.org/software/global/global.html). You will need version
# 4.8.6 or higher.
#
# To use it do the following:
# - Install the latest version of global
# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
# - Make sure the INPUT points to the root of the source tree
# - Run doxygen as normal
#
# Doxygen will invoke htags (and that will in turn invoke gtags), so these
# tools must be available from the command line (i.e. in the search path).
#
# The result: instead of the source browser generated by doxygen, the links to
# source code will now point to the output of htags.
# The default value is: NO.
# This tag requires that the tag SOURCE_BROWSER is set to YES.
USE_HTAGS = NO
# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
# verbatim copy of the header file for each class for which an include is
# specified. Set to NO to disable this.
# See also: Section \class.
# The default value is: YES.
VERBATIM_HEADERS = YES
# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
# cost of reduced performance. This can be particularly helpful with template
# rich C++ code for which doxygen's built-in parser lacks the necessary type
# information.
# Note: The availability of this option depends on whether or not doxygen was
# compiled with the --with-libclang option.
# The default value is: NO.
CLANG_ASSISTED_PARSING = NO
# If clang assisted parsing is enabled you can provide the compiler with command
# line options that you would normally use when invoking the compiler. Note that
# the include paths will already be set by doxygen for the files and directories
# specified with INPUT and INCLUDE_PATH.
# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
CLANG_OPTIONS =
#---------------------------------------------------------------------------
# Configuration options related to the alphabetical class index
#---------------------------------------------------------------------------
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
# compounds will be generated. Enable this if the project contains a lot of
# classes, structs, unions or interfaces.
# The default value is: YES.
ALPHABETICAL_INDEX = YES
# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
# which the alphabetical index list will be split.
# Minimum value: 1, maximum value: 20, default value: 5.
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
COLS_IN_ALPHA_INDEX = 5
# In case all classes in a project start with a common prefix, all classes will
# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
# can be used to specify a prefix (or a list of prefixes) that should be ignored
# while generating the index headers.
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
IGNORE_PREFIX =
#---------------------------------------------------------------------------
# Configuration options related to the HTML output
#---------------------------------------------------------------------------
# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
# The default value is: YES.
GENERATE_HTML = YES
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
# it.
# The default directory is: html.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_OUTPUT = html
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
# generated HTML page (for example: .htm, .php, .asp).
# The default value is: .html.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_FILE_EXTENSION = .html
# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
# each generated HTML page. If the tag is left blank doxygen will generate a
# standard header.
#
# To get valid HTML the header file that includes any scripts and style sheets
# that doxygen needs, which is dependent on the configuration options used (e.g.
# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
# default header using
# doxygen -w html new_header.html new_footer.html new_stylesheet.css
# YourConfigFile
# and then modify the file new_header.html. See also section "Doxygen usage"
# for information on how to generate the default header that doxygen normally
# uses.
# Note: The header is subject to change so you typically have to regenerate the
# default header when upgrading to a newer version of doxygen. For a description
# of the possible markers and block names see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_HEADER = template/header.html
# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
# generated HTML page. If the tag is left blank doxygen will generate a standard
# footer. See HTML_HEADER for more information on how to generate a default
# footer and what special commands can be used inside the footer. See also
# section "Doxygen usage" for information on how to generate the default footer
# that doxygen normally uses.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_FOOTER = template/footer.html
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
# sheet that is used by each HTML page. It can be used to fine-tune the look of
# the HTML output. If left blank doxygen will generate a default style sheet.
# See also section "Doxygen usage" for information on how to generate the style
# sheet that doxygen normally uses.
# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
# it is more robust and this tag (HTML_STYLESHEET) will in the future become
# obsolete.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_STYLESHEET =
# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
# cascading style sheets that are included after the standard style sheets
# created by doxygen. Using this option one can overrule certain style aspects.
# This is preferred over using HTML_STYLESHEET since it does not replace the
# standard style sheet and is therefore more robust against future updates.
# Doxygen will copy the style sheet files to the output directory.
# Note: The order of the extra style sheet files is of importance (e.g. the last
# style sheet in the list overrules the setting of the previous ones in the
# list). For an example see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_EXTRA_STYLESHEET = template/customdoxygen.css
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the HTML output directory. Note
# that these files will be copied to the base HTML output directory. Use the
# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
# files will be copied as-is; there are no commands or markers available.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_EXTRA_FILES = template/doxy-boot.js \
template/favicon.ico
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
# will adjust the colors in the style sheet and background images according to
# this color. Hue is specified as an angle on a colorwheel, see
# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
# purple, and 360 is red again.
# Minimum value: 0, maximum value: 359, default value: 220.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_COLORSTYLE_HUE = 220
# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
# in the HTML output. For a value of 0 the output will use grayscales only. A
# value of 255 will produce the most vivid colors.
# Minimum value: 0, maximum value: 255, default value: 100.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_COLORSTYLE_SAT = 100
# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
# luminance component of the colors in the HTML output. Values below 100
# gradually make the output lighter, whereas values above 100 make the output
# darker. The value divided by 100 is the actual gamma applied, so 80 represents
# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
# change the gamma.
# Minimum value: 40, maximum value: 240, default value: 80.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_COLORSTYLE_GAMMA = 80
# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
# page will contain the date and time when the page was generated. Setting this
# to YES can help to show when doxygen was last run and thus if the
# documentation is up to date.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_TIMESTAMP = NO
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_DYNAMIC_SECTIONS = NO
# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
# shown in the various tree structured indices initially; the user can expand
# and collapse entries dynamically later on. Doxygen will expand the tree to
# such a level that at most the specified number of entries are visible (unless
# a fully collapsed tree already exceeds this amount). So setting the number of
# entries 1 will produce a full collapsed tree by default. 0 is a special value
# representing an infinite number of entries and will result in a full expanded
# tree by default.
# Minimum value: 0, maximum value: 9999, default value: 100.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_INDEX_NUM_ENTRIES = 100
# If the GENERATE_DOCSET tag is set to YES, additional index files will be
# generated that can be used as input for Apple's Xcode 3 integrated development
# environment (see: http://developer.apple.com/tools/xcode/), introduced with
# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
# Makefile in the HTML output directory. Running make will produce the docset in
# that directory and running make install will install the docset in
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
# for more information.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
GENERATE_DOCSET = NO
# This tag determines the name of the docset feed. A documentation feed provides
# an umbrella under which multiple documentation sets from a single provider
# (such as a company or product suite) can be grouped.
# The default value is: Doxygen generated docs.
# This tag requires that the tag GENERATE_DOCSET is set to YES.
DOCSET_FEEDNAME = "Doxygen generated docs"
# This tag specifies a string that should uniquely identify the documentation
# set bundle. This should be a reverse domain-name style string, e.g.
# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
# The default value is: org.doxygen.Project.
# This tag requires that the tag GENERATE_DOCSET is set to YES.
DOCSET_BUNDLE_ID = org.doxygen.Project
# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
# the documentation publisher. This should be a reverse domain-name style
# string, e.g. com.mycompany.MyDocSet.documentation.
# The default value is: org.doxygen.Publisher.
# This tag requires that the tag GENERATE_DOCSET is set to YES.
DOCSET_PUBLISHER_ID = org.doxygen.Publisher
# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
# The default value is: Publisher.
# This tag requires that the tag GENERATE_DOCSET is set to YES.
DOCSET_PUBLISHER_NAME = Publisher
# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
# Windows.
#
# The HTML Help Workshop contains a compiler that can convert all HTML output
# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
# files are now used as the Windows 98 help format, and will replace the old
# Windows help format (.hlp) on all Windows platforms in the future. Compressed
# HTML files also contain an index, a table of contents, and you can search for
# words in the documentation. The HTML workshop also contains a viewer for
# compressed HTML files.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
GENERATE_HTMLHELP = NO
# The CHM_FILE tag can be used to specify the file name of the resulting .chm
# file. You can add a path in front of the file if the result should not be
# written to the html output directory.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
CHM_FILE =
# The HHC_LOCATION tag can be used to specify the location (absolute path
# including file name) of the HTML help compiler (hhc.exe). If non-empty,
# doxygen will try to run the HTML help compiler on the generated index.hhp.
# The file has to be specified with full path.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
HHC_LOCATION =
# The GENERATE_CHI flag controls if a separate .chi index file is generated
# (YES) or that it should be included in the master .chm file (NO).
# The default value is: NO.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
GENERATE_CHI = NO
# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
# and project file content.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
CHM_INDEX_ENCODING =
# The BINARY_TOC flag controls whether a binary table of contents is generated
# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
# enables the Previous and Next buttons.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
BINARY_TOC = NO
# The TOC_EXPAND flag can be set to YES to add extra items for group members to
# the table of contents of the HTML help documentation and to the tree view.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
TOC_EXPAND = NO
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
# (.qch) of the generated HTML documentation.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
GENERATE_QHP = NO
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
# the file name of the resulting .qch file. The path specified is relative to
# the HTML output folder.
# This tag requires that the tag GENERATE_QHP is set to YES.
QCH_FILE =
# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
# Project output. For more information please see Qt Help Project / Namespace
# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
# The default value is: org.doxygen.Project.
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_NAMESPACE = org.doxygen.Project
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
# Help Project output. For more information please see Qt Help Project / Virtual
# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
# folders).
# The default value is: doc.
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_VIRTUAL_FOLDER = doc
# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
# filter to add. For more information please see Qt Help Project / Custom
# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
# filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
# custom filter to add. For more information please see Qt Help Project / Custom
# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
# filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_CUST_FILTER_ATTRS =
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
# project's filter section matches. Qt Help Project / Filter Attributes (see:
# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_SECT_FILTER_ATTRS =
# The QHG_LOCATION tag can be used to specify the location of Qt's
# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
# generated .qhp file.
# This tag requires that the tag GENERATE_QHP is set to YES.
QHG_LOCATION =
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
# generated, together with the HTML files, they form an Eclipse help plugin. To
# install this plugin and make it available under the help contents menu in
# Eclipse, the contents of the directory containing the HTML and XML files needs
# to be copied into the plugins directory of eclipse. The name of the directory
# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
# After copying Eclipse needs to be restarted before the help appears.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
GENERATE_ECLIPSEHELP = NO
# A unique identifier for the Eclipse help plugin. When installing the plugin
# the directory name containing the HTML and XML files should also have this
# name. Each documentation set should have its own identifier.
# The default value is: org.doxygen.Project.
# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
ECLIPSE_DOC_ID = org.doxygen.Project
# If you want full control over the layout of the generated HTML pages it might
# be necessary to disable the index and replace it with your own. The
# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
# of each HTML page. A value of NO enables the index and the value YES disables
# it. Since the tabs in the index contain the same information as the navigation
# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
DISABLE_INDEX = NO
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information. If the tag
# value is set to YES, a side panel will be generated containing a tree-like
# index structure (just like the one that is generated for HTML Help). For this
# to work a browser that supports JavaScript, DHTML, CSS and frames is required
# (i.e. any modern browser). Windows users are probably better off using the
# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
# further fine-tune the look of the index. As an example, the default style
# sheet generated by doxygen has an example that shows how to put an image at
# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
# the same information as the tab index, you could consider setting
# DISABLE_INDEX to YES when enabling this option.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
GENERATE_TREEVIEW = NO
# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
# doxygen will group on one line in the generated HTML documentation.
#
# Note that a value of 0 will completely suppress the enum values from appearing
# in the overview section.
# Minimum value: 0, maximum value: 20, default value: 4.
# This tag requires that the tag GENERATE_HTML is set to YES.
ENUM_VALUES_PER_LINE = 4
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
# to set the initial width (in pixels) of the frame in which the tree is shown.
# Minimum value: 0, maximum value: 1500, default value: 250.
# This tag requires that the tag GENERATE_HTML is set to YES.
TREEVIEW_WIDTH = 250
# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
# external symbols imported via tag files in a separate window.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
EXT_LINKS_IN_WINDOW = NO
# Use this tag to change the font size of LaTeX formulas included as images in
# the HTML documentation. When you change the font size after a successful
# doxygen run you need to manually remove any form_*.png images from the HTML
# output directory to force them to be regenerated.
# Minimum value: 8, maximum value: 50, default value: 10.
# This tag requires that the tag GENERATE_HTML is set to YES.
FORMULA_FONTSIZE = 10
# Use the FORMULA_TRANPARENT tag to determine whether or not the images
# generated for formulas are transparent PNGs. Transparent PNGs are not
# supported properly for IE 6.0, but are supported on all modern browsers.
#
# Note that when changing this option you need to delete any form_*.png files in
# the HTML output directory before the changes have effect.
# The default value is: YES.
# This tag requires that the tag GENERATE_HTML is set to YES.
FORMULA_TRANSPARENT = YES
# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
# http://www.mathjax.org) which uses client side Javascript for the rendering
# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
# installed or if you want to formulas look prettier in the HTML output. When
# enabled you may also need to install MathJax separately and configure the path
# to it using the MATHJAX_RELPATH option.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
USE_MATHJAX = NO
# When MathJax is enabled you can set the default output format to be used for
# the MathJax output. See the MathJax site (see:
# http://docs.mathjax.org/en/latest/output.html) for more details.
# Possible values are: HTML-CSS (which is slower, but has the best
# compatibility), NativeMML (i.e. MathML) and SVG.
# The default value is: HTML-CSS.
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_FORMAT = HTML-CSS
# When MathJax is enabled you need to specify the location relative to the HTML
# output directory using the MATHJAX_RELPATH option. The destination directory
# should contain the MathJax.js script. For instance, if the mathjax directory
# is located at the same level as the HTML output directory, then
# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
# Content Delivery Network so you can quickly see the result without installing
# MathJax. However, it is strongly recommended to install a local copy of
# MathJax from http://www.mathjax.org before deployment.
# The default value is: http://cdn.mathjax.org/mathjax/latest.
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
# extension names that should be enabled during MathJax rendering. For example
# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_EXTENSIONS =
# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
# of code that will be used on startup of the MathJax code. See the MathJax site
# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
# example see the documentation.
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_CODEFILE =
# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
# the HTML output. The underlying search engine uses javascript and DHTML and
# should work on any modern browser. Note that when using HTML help
# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
# there is already a search function so this one should typically be disabled.
# For large projects the javascript based search engine can be slow, then
# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
# search using the keyboard; to jump to the search box use <access key> + S
# (what the <access key> is depends on the OS and browser, but it is typically
# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
# key> to jump into the search results window, the results can be navigated
# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
# the search. The filter options can be selected when the cursor is inside the
# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
# to select a filter and <Enter> or <escape> to activate or cancel the filter
# option.
# The default value is: YES.
# This tag requires that the tag GENERATE_HTML is set to YES.
SEARCHENGINE = YES
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
# implemented using a web server instead of a web client using Javascript. There
# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
# setting. When disabled, doxygen will generate a PHP script for searching and
# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
# and searching needs to be provided by external tools. See the section
# "External Indexing and Searching" for details.
# The default value is: NO.
# This tag requires that the tag SEARCHENGINE is set to YES.
SERVER_BASED_SEARCH = NO
# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
# script for searching. Instead the search results are written to an XML file
# which needs to be processed by an external indexer. Doxygen will invoke an
# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
# search results.
#
# Doxygen ships with an example indexer (doxyindexer) and search engine
# (doxysearch.cgi) which are based on the open source search engine library
# Xapian (see: http://xapian.org/).
#
# See the section "External Indexing and Searching" for details.
# The default value is: NO.
# This tag requires that the tag SEARCHENGINE is set to YES.
EXTERNAL_SEARCH = NO
# The SEARCHENGINE_URL should point to a search engine hosted by a web server
# which will return the search results when EXTERNAL_SEARCH is enabled.
#
# Doxygen ships with an example indexer (doxyindexer) and search engine
# (doxysearch.cgi) which are based on the open source search engine library
# Xapian (see: http://xapian.org/). See the section "External Indexing and
# Searching" for details.
# This tag requires that the tag SEARCHENGINE is set to YES.
SEARCHENGINE_URL =
# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
# search data is written to a file for indexing by an external tool. With the
# SEARCHDATA_FILE tag the name of this file can be specified.
# The default file is: searchdata.xml.
# This tag requires that the tag SEARCHENGINE is set to YES.
SEARCHDATA_FILE = searchdata.xml
# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
# projects and redirect the results back to the right project.
# This tag requires that the tag SEARCHENGINE is set to YES.
EXTERNAL_SEARCH_ID =
# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
# projects other than the one defined by this configuration file, but that are
# all added to the same external search index. Each project needs to have a
# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
# to a relative location where the documentation can be found. The format is:
# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
# This tag requires that the tag SEARCHENGINE is set to YES.
EXTRA_SEARCH_MAPPINGS =
#---------------------------------------------------------------------------
# Configuration options related to the LaTeX output
#---------------------------------------------------------------------------
# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
# The default value is: YES.
GENERATE_LATEX = NO
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
# it.
# The default directory is: latex.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_OUTPUT = latex
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
# invoked.
#
# Note that when enabling USE_PDFLATEX this option is only used for generating
# bitmaps for formulas in the HTML output, but not in the Makefile that is
# written to the output directory.
# The default file is: latex.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_CMD_NAME = latex
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
# index for LaTeX.
# The default file is: makeindex.
# This tag requires that the tag GENERATE_LATEX is set to YES.
MAKEINDEX_CMD_NAME = makeindex
# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
# documents. This may be useful for small projects and may help to save some
# trees in general.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.
COMPACT_LATEX = NO
# The PAPER_TYPE tag can be used to set the paper type that is used by the
# printer.
# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
# 14 inches) and executive (7.25 x 10.5 inches).
# The default value is: a4.
# This tag requires that the tag GENERATE_LATEX is set to YES.
PAPER_TYPE = a4
# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
# that should be included in the LaTeX output. The package can be specified just
# by its name or with the correct syntax as to be used with the LaTeX
# \usepackage command. To get the times font for instance you can specify :
# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
# To use the option intlimits with the amsmath package you can specify:
# EXTRA_PACKAGES=[intlimits]{amsmath}
# If left blank no extra packages will be included.
# This tag requires that the tag GENERATE_LATEX is set to YES.
EXTRA_PACKAGES =
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
# generated LaTeX document. The header should contain everything until the first
# chapter. If it is left blank doxygen will generate a standard header. See
# section "Doxygen usage" for information on how to let doxygen write the
# default header to a separate file.
#
# Note: Only use a user-defined header if you know what you are doing! The
# following commands have a special meaning inside the header: $title,
# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
# string, for the replacement values of the other commands the user is referred
# to HTML_HEADER.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_HEADER =
# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
# generated LaTeX document. The footer should contain everything after the last
# chapter. If it is left blank doxygen will generate a standard footer. See
# LATEX_HEADER for more information on how to generate a default footer and what
# special commands can be used inside the footer.
#
# Note: Only use a user-defined footer if you know what you are doing!
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_FOOTER =
# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
# LaTeX style sheets that are included after the standard style sheets created
# by doxygen. Using this option one can overrule certain style aspects. Doxygen
# will copy the style sheet files to the output directory.
# Note: The order of the extra style sheet files is of importance (e.g. the last
# style sheet in the list overrules the setting of the previous ones in the
# list).
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_EXTRA_STYLESHEET =
# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the LATEX_OUTPUT output
# directory. Note that the files will be copied as-is; there are no commands or
# markers available.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_EXTRA_FILES =
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
# contain links (just like the HTML output) instead of page references. This
# makes the output suitable for online browsing using a PDF viewer.
# The default value is: YES.
# This tag requires that the tag GENERATE_LATEX is set to YES.
PDF_HYPERLINKS = YES
# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
# the PDF file directly from the LaTeX files. Set this option to YES, to get a
# higher quality PDF documentation.
# The default value is: YES.
# This tag requires that the tag GENERATE_LATEX is set to YES.
USE_PDFLATEX = YES
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
# command to the generated LaTeX files. This will instruct LaTeX to keep running
# if errors occur, instead of asking the user for help. This option is also used
# when generating formulas in HTML.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_BATCHMODE = NO
# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
# index chapters (such as File Index, Compound Index, etc.) in the output.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_HIDE_INDICES = NO
# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
# code with syntax highlighting in the LaTeX output.
#
# Note that which sources are shown also depends on other settings such as
# SOURCE_BROWSER.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_SOURCE_CODE = NO
# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
# bibliography, e.g. plainnat, or ieeetr. See
# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
# The default value is: plain.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_BIB_STYLE = plain
#---------------------------------------------------------------------------
# Configuration options related to the RTF output
#---------------------------------------------------------------------------
# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
# RTF output is optimized for Word 97 and may not look too pretty with other RTF
# readers/editors.
# The default value is: NO.
GENERATE_RTF = NO
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
# it.
# The default directory is: rtf.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_OUTPUT = rtf
# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
# documents. This may be useful for small projects and may help to save some
# trees in general.
# The default value is: NO.
# This tag requires that the tag GENERATE_RTF is set to YES.
COMPACT_RTF = NO
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
# contain hyperlink fields. The RTF file will contain links (just like the HTML
# output) instead of page references. This makes the output suitable for online
# browsing using Word or some other Word compatible readers that support those
# fields.
#
# Note: WordPad (write) and others do not support links.
# The default value is: NO.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_HYPERLINKS = NO
# Load stylesheet definitions from file. Syntax is similar to doxygen's config
# file, i.e. a series of assignments. You only have to provide replacements,
# missing definitions are set to their default value.
#
# See also section "Doxygen usage" for information on how to generate the
# default style sheet that doxygen normally uses.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an RTF document. Syntax is
# similar to doxygen's config file. A template extensions file can be generated
# using doxygen -e rtf extensionFile.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_EXTENSIONS_FILE =
# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
# with syntax highlighting in the RTF output.
#
# Note that which sources are shown also depends on other settings such as
# SOURCE_BROWSER.
# The default value is: NO.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_SOURCE_CODE = NO
#---------------------------------------------------------------------------
# Configuration options related to the man page output
#---------------------------------------------------------------------------
# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
# classes and files.
# The default value is: NO.
GENERATE_MAN = NO
# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
# it. A directory man3 will be created inside the directory specified by
# MAN_OUTPUT.
# The default directory is: man.
# This tag requires that the tag GENERATE_MAN is set to YES.
MAN_OUTPUT = man
# The MAN_EXTENSION tag determines the extension that is added to the generated
# man pages. In case the manual section does not start with a number, the number
# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
# optional.
# The default value is: .3.
# This tag requires that the tag GENERATE_MAN is set to YES.
MAN_EXTENSION = .3
# The MAN_SUBDIR tag determines the name of the directory created within
# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
# MAN_EXTENSION with the initial . removed.
# This tag requires that the tag GENERATE_MAN is set to YES.
MAN_SUBDIR =
# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
# will generate one additional man file for each entity documented in the real
# man page(s). These additional files only source the real man page, but without
# them the man command would be unable to find the correct page.
# The default value is: NO.
# This tag requires that the tag GENERATE_MAN is set to YES.
MAN_LINKS = NO
#---------------------------------------------------------------------------
# Configuration options related to the XML output
#---------------------------------------------------------------------------
# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
# captures the structure of the code including all documentation.
# The default value is: NO.
GENERATE_XML = NO
# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
# it.
# The default directory is: xml.
# This tag requires that the tag GENERATE_XML is set to YES.
XML_OUTPUT = xml
# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
# listings (including syntax highlighting and cross-referencing information) to
# the XML output. Note that enabling this will significantly increase the size
# of the XML output.
# The default value is: YES.
# This tag requires that the tag GENERATE_XML is set to YES.
XML_PROGRAMLISTING = YES
#---------------------------------------------------------------------------
# Configuration options related to the DOCBOOK output
#---------------------------------------------------------------------------
# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
# that can be used to generate PDF.
# The default value is: NO.
GENERATE_DOCBOOK = NO
# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
# front of it.
# The default directory is: docbook.
# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
DOCBOOK_OUTPUT = docbook
# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
# program listings (including syntax highlighting and cross-referencing
# information) to the DOCBOOK output. Note that enabling this will significantly
# increase the size of the DOCBOOK output.
# The default value is: NO.
# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
DOCBOOK_PROGRAMLISTING = NO
#---------------------------------------------------------------------------
# Configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
# AutoGen Definitions (see http://autogen.sf.net) file that captures the
# structure of the code including all documentation. Note that this feature is
# still experimental and incomplete at the moment.
# The default value is: NO.
GENERATE_AUTOGEN_DEF = NO
#---------------------------------------------------------------------------
# Configuration options related to the Perl module output
#---------------------------------------------------------------------------
# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
# file that captures the structure of the code including all documentation.
#
# Note that this feature is still experimental and incomplete at the moment.
# The default value is: NO.
GENERATE_PERLMOD = NO
# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
# output from the Perl module output.
# The default value is: NO.
# This tag requires that the tag GENERATE_PERLMOD is set to YES.
PERLMOD_LATEX = NO
# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
# formatted so it can be parsed by a human reader. This is useful if you want to
# understand what is going on. On the other hand, if this tag is set to NO, the
# size of the Perl module output will be much smaller and Perl will parse it
# just the same.
# The default value is: YES.
# This tag requires that the tag GENERATE_PERLMOD is set to YES.
PERLMOD_PRETTY = YES
# The names of the make variables in the generated doxyrules.make file are
# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
# so different doxyrules.make files included by the same Makefile don't
# overwrite each other's variables.
# This tag requires that the tag GENERATE_PERLMOD is set to YES.
PERLMOD_MAKEVAR_PREFIX =
#---------------------------------------------------------------------------
# Configuration options related to the preprocessor
#---------------------------------------------------------------------------
# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
# C-preprocessor directives found in the sources and include files.
# The default value is: YES.
ENABLE_PREPROCESSING = YES
# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
# in the source code. If set to NO, only conditional compilation will be
# performed. Macro expansion can be done in a controlled way by setting
# EXPAND_ONLY_PREDEF to YES.
# The default value is: NO.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
MACRO_EXPANSION = NO
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
# the macro expansion is limited to the macros specified with the PREDEFINED and
# EXPAND_AS_DEFINED tags.
# The default value is: NO.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
EXPAND_ONLY_PREDEF = NO
# If the SEARCH_INCLUDES tag is set to YES, the include files in the
# INCLUDE_PATH will be searched if a #include is found.
# The default value is: YES.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
SEARCH_INCLUDES = YES
# The INCLUDE_PATH tag can be used to specify one or more directories that
# contain include files that are not input files but should be processed by the
# preprocessor.
# This tag requires that the tag SEARCH_INCLUDES is set to YES.
INCLUDE_PATH =
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
# patterns (like *.h and *.hpp) to filter out the header-files in the
# directories. If left blank, the patterns specified with FILE_PATTERNS will be
# used.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
INCLUDE_FILE_PATTERNS =
# The PREDEFINED tag can be used to specify one or more macro names that are
# defined before the preprocessor is started (similar to the -D option of e.g.
# gcc). The argument of the tag is a list of macros of the form: name or
# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
# is assumed. To prevent a macro definition from being undefined via #undef or
# recursively expanded use the := operator instead of the = operator.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
PREDEFINED = CONF_DEBUG \
EEZ_PSU_ARDUINO \
EEZ_PSU_SIMULATOR
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
# tag can be used to specify a list of macro names that should be expanded. The
# macro definition that is found in the sources will be used. Use the PREDEFINED
# tag if you want to use a different macro definition that overrules the
# definition found in the source code.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
EXPAND_AS_DEFINED =
# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
# remove all references to function-like macros that are alone on a line, have
# an all uppercase name, and do not end with a semicolon. Such function macros
# are typically used for boiler-plate code, and will confuse the parser if not
# removed.
# The default value is: YES.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
SKIP_FUNCTION_MACROS = YES
#---------------------------------------------------------------------------
# Configuration options related to external references
#---------------------------------------------------------------------------
# The TAGFILES tag can be used to specify one or more tag files. For each tag
# file the location of the external documentation should be added. The format of
# a tag file without this location is as follows:
# TAGFILES = file1 file2 ...
# Adding location for the tag files is done as follows:
# TAGFILES = file1=loc1 "file2 = loc2" ...
# where loc1 and loc2 can be relative or absolute paths or URLs. See the
# section "Linking to external documentation" for more information about the use
# of tag files.
# Note: Each tag file must have a unique name (where the name does NOT include
# the path). If a tag file is not located in the directory in which doxygen is
# run, you must also specify the path to the tagfile here.
TAGFILES =
# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
# tag file that is based on the input files it reads. See section "Linking to
# external documentation" for more information about the usage of tag files.
GENERATE_TAGFILE =
# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
# the class index. If set to NO, only the inherited external classes will be
# listed.
# The default value is: NO.
ALLEXTERNALS = NO
# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
# in the modules index. If set to NO, only the current project's groups will be
# listed.
# The default value is: YES.
EXTERNAL_GROUPS = YES
# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
# the related pages index. If set to NO, only the current project's pages will
# be listed.
# The default value is: YES.
EXTERNAL_PAGES = YES
# The PERL_PATH should be the absolute path and name of the perl script
# interpreter (i.e. the result of 'which perl').
# The default file (with absolute path) is: /usr/bin/perl.
PERL_PATH = /usr/bin/perl
#---------------------------------------------------------------------------
# Configuration options related to the dot tool
#---------------------------------------------------------------------------
# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
# NO turns the diagrams off. Note that this option also works with HAVE_DOT
# disabled, but it is recommended to install and use dot, since it yields more
# powerful graphs.
# The default value is: YES.
CLASS_DIAGRAMS = YES
# You can define message sequence charts within doxygen comments using the \msc
# command. Doxygen will then run the mscgen tool (see:
# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
# documentation. The MSCGEN_PATH tag allows you to specify the directory where
# the mscgen tool resides. If left empty the tool is assumed to be found in the
# default search path.
MSCGEN_PATH =
# You can include diagrams made with dia in doxygen documentation. Doxygen will
# then run dia to produce the diagram and insert it in the documentation. The
# DIA_PATH tag allows you to specify the directory where the dia binary resides.
# If left empty dia is assumed to be found in the default search path.
DIA_PATH =
# If set to YES the inheritance and collaboration graphs will hide inheritance
# and usage relations if the target is undocumented or is not a class.
# The default value is: YES.
HIDE_UNDOC_RELATIONS = YES
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
# available from the path. This tool is part of Graphviz (see:
# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
# Bell Labs. The other options in this section have no effect if this option is
# set to NO
# The default value is: NO.
HAVE_DOT = YES
# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
# to run in parallel. When set to 0 doxygen will base this on the number of
# processors available in the system. You can set it explicitly to a value
# larger than 0 to get control over the balance between CPU load and processing
# speed.
# Minimum value: 0, maximum value: 32, default value: 0.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_NUM_THREADS = 0
# When you want a differently looking font in the dot files that doxygen
# generates you can specify the font name using DOT_FONTNAME. You need to make
# sure dot is able to find the font, which can be done by putting it in a
# standard location or by setting the DOTFONTPATH environment variable or by
# setting DOT_FONTPATH to the directory containing the font.
# The default value is: Helvetica.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_FONTNAME = Helvetica
# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
# dot graphs.
# Minimum value: 4, maximum value: 24, default value: 10.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_FONTSIZE = 10
# By default doxygen will tell dot to use the default font as specified with
# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
# the path where dot can find it using this tag.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_FONTPATH =
# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
# each documented class showing the direct and indirect inheritance relations.
# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
CLASS_GRAPH = YES
# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
# graph for each documented class showing the direct and indirect implementation
# dependencies (inheritance, containment, and class references variables) of the
# class with other documented classes.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
COLLABORATION_GRAPH = YES
# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
# groups, showing the direct groups dependencies.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
GROUP_GRAPHS = YES
# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
# collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.
UML_LOOK = NO
# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
# class node. If there are many fields or methods and many nodes the graph may
# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
# number of items for each type to make the size more manageable. Set this to 0
# for no limit. Note that the threshold may be exceeded by 50% before the limit
# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
# but if the number exceeds 15, the total amount of fields shown is limited to
# 10.
# Minimum value: 0, maximum value: 100, default value: 10.
# This tag requires that the tag HAVE_DOT is set to YES.
UML_LIMIT_NUM_FIELDS = 10
# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
# collaboration graphs will show the relations between templates and their
# instances.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.
TEMPLATE_RELATIONS = NO
# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
# YES then doxygen will generate a graph for each documented file showing the
# direct and indirect include dependencies of the file with other documented
# files.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
INCLUDE_GRAPH = YES
# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
# set to YES then doxygen will generate a graph for each documented file showing
# the direct and indirect include dependencies of the file with other documented
# files.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
INCLUDED_BY_GRAPH = YES
# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
# dependency graph for every global function or class method.
#
# Note that enabling this option will significantly increase the time of a run.
# So in most cases it will be better to enable call graphs for selected
# functions only using the \callgraph command. Disabling a call graph can be
# accomplished by means of the command \hidecallgraph.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.
CALL_GRAPH = YES
# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
# dependency graph for every global function or class method.
#
# Note that enabling this option will significantly increase the time of a run.
# So in most cases it will be better to enable caller graphs for selected
# functions only using the \callergraph command. Disabling a caller graph can be
# accomplished by means of the command \hidecallergraph.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.
CALLER_GRAPH = YES
# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
# hierarchy of all classes instead of a textual one.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
GRAPHICAL_HIERARCHY = YES
# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
# dependencies a directory has on other directories in a graphical way. The
# dependency relations are determined by the #include relations between the
# files in the directories.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
DIRECTORY_GRAPH = YES
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
# generated by dot. For an explanation of the image formats see the section
# output formats in the documentation of the dot tool (Graphviz (see:
# http://www.graphviz.org/)).
# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
# to make the SVG files visible in IE 9+ (other browsers do not have this
# requirement).
# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
# png:gdiplus:gdiplus.
# The default value is: png.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_IMAGE_FORMAT = png
# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
# enable generation of interactive SVG images that allow zooming and panning.
#
# Note that this requires a modern browser other than Internet Explorer. Tested
# and working are Firefox, Chrome, Safari, and Opera.
# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
# the SVG files visible. Older versions of IE do not have SVG support.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.
INTERACTIVE_SVG = NO
# The DOT_PATH tag can be used to specify the path where the dot tool can be
# found. If left blank, it is assumed the dot tool can be found in the path.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_PATH =
# The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the \dotfile
# command).
# This tag requires that the tag HAVE_DOT is set to YES.
DOTFILE_DIRS =
# The MSCFILE_DIRS tag can be used to specify one or more directories that
# contain msc files that are included in the documentation (see the \mscfile
# command).
MSCFILE_DIRS =
# The DIAFILE_DIRS tag can be used to specify one or more directories that
# contain dia files that are included in the documentation (see the \diafile
# command).
DIAFILE_DIRS =
# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
# path where java can find the plantuml.jar file. If left blank, it is assumed
# PlantUML is not used or called during a preprocessing step. Doxygen will
# generate a warning when it encounters a \startuml command in this case and
# will not generate output for the diagram.
PLANTUML_JAR_PATH =
# When using plantuml, the specified paths are searched for files specified by
# the !include statement in a plantuml block.
PLANTUML_INCLUDE_PATH =
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
# that will be shown in the graph. If the number of nodes in a graph becomes
# larger than this value, doxygen will truncate the graph, which is visualized
# by representing a node as a red box. Note that doxygen if the number of direct
# children of the root node in a graph is already larger than
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
# Minimum value: 0, maximum value: 10000, default value: 50.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_GRAPH_MAX_NODES = 50
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
# generated by dot. A depth value of 3 means that only nodes reachable from the
# root by following a path via at most 3 edges will be shown. Nodes that lay
# further from the root node will be omitted. Note that setting this option to 1
# or 2 may greatly reduce the computation time needed for large code bases. Also
# note that the size of a graph can be further restricted by
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
# Minimum value: 0, maximum value: 1000, default value: 0.
# This tag requires that the tag HAVE_DOT is set to YES.
MAX_DOT_GRAPH_DEPTH = 0
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
# background. This is disabled by default, because dot on Windows does not seem
# to support this out of the box.
#
# Warning: Depending on the platform used, enabling this option may lead to
# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
# read).
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_TRANSPARENT = NO
# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
# files in one run (i.e. multiple -o and -T options on the command line). This
# makes dot run faster, but since only newer versions of dot (>1.8.10) support
# this, this feature is disabled by default.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_MULTI_TARGETS = NO
# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
# explaining the meaning of the various boxes and arrows in the dot generated
# graphs.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
GENERATE_LEGEND = YES
# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
# files that are used to generate the various graphs.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_CLEANUP = YES
================================================
FILE: doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 1 - introduction.html
================================================
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<title></title>
<style type="text/css">
/* Reset */
ol, ul { margin: 0; padding: 0; }
li { list-style-position: outside; }
/* Paragraphs and texts */
.Heading_1 { margin-top: 4.23mm; margin-bottom: 2.12mm; font-size: 14.0pt; font-weight: bold; color: #0066cc; }
.Heading_2 { margin-left: 7.62mm; margin-top: 4.5mm; margin-bottom: 2.5mm; text-indent: -7.62mm; font-size: 12.0pt; font-weight: bold; font-style: italic; color: #0066cc; }
.List_1 { text-align: left; margin-left: 10mm; margin-right: 1.99mm; text-indent: -6mm; }
.List_1_End { text-align: left; margin-left: 10mm; margin-right: 1.99mm; margin-bottom: 3mm; text-indent: -6mm; }
.List_1_Start { text-align: left; margin-left: 10mm; margin-right: 1.99mm; margin-top: 3mm; text-indent: -6mm; }
p { text-align: justify; margin-left: 0; margin-right: 0; margin-top: 0; margin-bottom: 0; border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; padding-left: 0; padding-right: 0; padding-top: 0; padding-bottom: 0; text-indent: 0; background: transparent; font-family: "Arial"; font-size: 10.5pt; font-weight: normal; font-style: normal; }
li { text-align: justify; margin-left: 0; margin-right: 0; margin-top: 0; margin-bottom: 0; border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; padding-left: 0; padding-right: 0; padding-top: 0; padding-bottom: 0; text-indent: 0; background: transparent; font-family: "Arial"; font-size: 10.5pt; font-weight: normal; font-style: normal; }
.note { font-style: italic; }
/* Footnotes & endnotes */
#webpub_footnotes_divider { clear: both; margin-top: 2em; width: 25%; border-top: 1px solid black; }
#webpub_footnotes { font-size: 80%; text-align: justify; }
#webpub_footnotes td.label { text-align: right; vertical-align: top; }
#webpub_footnotes td.content { }
a.webpub_footnote { font-size: 80%; vertical-align: super; }
#webpub_endnotes_divider { clear: both; margin-top: 2em; width: 25%; border-top: 3px double black; }
#webpub_endnotes { font-size: 80%; text-align: justify; }
#webpub_endnotes td.label { text-align: right; vertical-align: top; }
#webpub_endnotes td.content { }
a.webpub_endnote { font-size: 80%; vertical-align: super; }
</style>
</head>
<body>
<p class="Heading_1">1. <a name="_introduction"></a>Introduction</p>
<p>This manual contains reference information for programming the open hardware/open source EEZ programmable PSU (Power Supply Unit) over the remote interface using the SCPI programming language.</p>
<p>The SCPI (<span style="font-style: italic;">Standard Commands for Programmable Instruments</span>, often pronounced “skippy”) is an open standard freely available on the <a href="http://www.ivifoundation.org/scpi/" target="_blank"><span style="text-decoration: underline;">IVI Foundation</span></a> web pages. The current version is SCPI 1999.0.</p>
<p>SCPI is a pure software standard, and can be used over many communication interfaces. SCPI communications are ASCII text, and therefore can be supported in programs written in almost any computer language, such as C, C++, etc.</p>
<p> </p>
<p>The physical communications link is not defined by SCPI. It was originally created with the IEEE 488 (GPIB) environment in mind, but it can also be used with RS-232 (serial), Ethernet, USB, VXIbus, HiSLIP, etc. The EEZ PSU supports Serial (via USB) and Ethernet communication.</p>
<p>The application software that uses SCPI commands is called a <span style="font-style: italic;">Controller</span> and that in a SCPI enabled device – such as the EEZ PSU – is called an <span style="font-style: italic;">Instrument</span>.</p>
<p> </p>
<p class="note">Please note that IEEE 488 standard documents are not freely available, and when it's mentioned in this manual we do so only for reference purposes. Those who with to research the GPIB for better understanding or possible modification/improvement of the PSU remote control may wish to purchase standards documents from the IEEE. </p>
<p class="Heading_2">1.1. About SCPI</p>
<p>The SCPI 1999.0 standard document says (Section 1.3) the goal of SCPI is to reduce Automatic Test Equipment (ATE) program development time. SCPI does this goal by providing a consistent programming environment for instrument control and data usage. This is achieved by use of defined program messages, instrument responses, and data formats across all SCPI instruments, regardless of manufacturer.</p>
<p>A consistent program environment uses the same commands and parameters to control instruments that have the same function.</p>
<p>SCPI programming consistency is both vertical and horizontal. Vertical programming consistency defines program messages within an instrument class. An example of vertical consistency is using the same command for reading DC voltage from different multimeters supporting SCPI. Horizontal consistency uses the same command to control similar functions across instrument classes. For example, the trigger command would be the same for trigger functions found in conforming counters, oscilloscopes, function generators, etc.</p>
<p>A key to consistent programming is the reduction of multiple ways to control similar instrument functions. The philosophy of SCPI is that the same instrument functions are to be controlled by the same SCPI commands. To simplify learning, SCPI uses industry-standard names, and terms that are manufacturer and customer supported.</p>
<p>SCPI is designed to be expanded with new defined commands in the future without causing programming problems. As new instruments are introduced, the intent is to maintain program compatibility with existing SCPI instruments.</p>
<p> </p>
<p> </p>
<p>Additional links:</p>
<ul>
<li class="List_1_Start" style="text-indent: 0; list-style-type: disc;">Wikipedia <a href="https://en.wikipedia.org/wiki/Standard_Commands_for_Programmable_Instruments" target="_blank"><span style="text-decoration: underline;">SCPI</span></a></li>
<li class="List_1" style="text-indent: 0; list-style-type: disc;">Technopedia <a href="https://www.techopedia.com/definition/21951/standard-commands-for-programmable-instruments-scpi" target="_blank"><span style="text-decoration: underline;">Standard Commands For Programmable Instruments (SCPI)</span></a></li>
<li class="List_1" style="text-indent: 0; list-style-type: disc;">Wikipedia <a href="https://en.wikipedia.org/wiki/IEEE-488" target="_blank"><span style="text-decoration: underline;">IEEE-488</span></a></li>
<li class="List_1" style="text-indent: 0; list-style-type: disc;">Keysight (ex. Agilent) <a href="http://www.keysight.com/main/redirector.jspx?action=ref&lc=eng&cc=HR&nfr=&ckey=1708060&cname=EDITORIAL" target="_blank"><span style="text-decoration: underline;">Developing a SCPI command set</span></a></li>
<li class="List_1_End" style="text-indent: 0; list-style-type: disc;">NI (National Instrument) <a href="http://www.ni.com/white-paper/3388/en/" target="_blank"><span style="text-decoration: underline;">GPIB Hardware and Software Specifications</span></a></li>
</ul>
<p>Implementation links:</p>
<ul>
<li class="List_1_Start" style="text-indent: 0; list-style-type: disc;"><a href="https://j123b567.github.io/scpi-parser/" target="_blank"><span style="text-decoration: underline;">Open source SCPI device</span></a> library</li>
<li class="List_1" style="text-indent: 0; list-style-type: disc;">Keysight (ex. Agilent) <a href="http://cp.literature.agilent.com/litweb/pdf/5989-6717EN.pdf" target="_blank"><span style="text-decoration: underline;">Application Note 1465-29</span></a></li>
<li class="List_1" style="text-indent: 0; list-style-type: disc;">Keysight (ex. Agilent) <a href="http://www.keysight.com/en/pd-2036130/command-expert?cc=US&lc=eng" target="_blank"><span style="text-decoration: underline;">Command Expert</span></a></li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
</body>
</html>
================================================
FILE: doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 10 - Programming examples.html
================================================
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<title></title>
<style type="text/css">
/* Reset */
ol, ul { margin: 0; padding: 0; }
li { list-style-position: outside; }
/* Paragraphs and texts */
.Heading_1 { margin-top: 4.23mm; margin-bottom: 2.12mm; font-size: 14.0pt; font-weight: bold; color: #0066cc; }
.Heading_2 { margin-left: 7.62mm; margin-top: 4.5mm; margin-bottom: 2.5mm; text-indent: -7.62mm; font-size: 12.0pt; font-weight: bold; font-style: italic; color: #0066cc; }
.List_1 { text-align: left; margin-left: 10mm; margin-right: 1.99mm; text-indent: -6mm; }
.List_1_End { text-align: left; margin-left: 10mm; margin-right: 1.99mm; margin-bottom: 3mm; text-indent: -6mm; }
.List_1_Start { text-align: left; margin-left: 10mm; margin-right: 1.99mm; margin-top: 3mm; text-indent: -6mm; }
p { text-align: justify; margin-left: 0; margin-right: 0; margin-top: 0; margin-bottom: 0; border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; padding-left: 0; padding-right: 0; padding-top: 0; padding-bottom: 0; text-indent: 0; background: transparent; font-family: "Arial"; font-size: 10.5pt; font-weight: normal; font-style: normal; }
li { text-align: justify; margin-left: 0; margin-right: 0; margin-top: 0; margin-bottom: 0; border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; padding-left: 0; padding-right: 0; padding-top: 0; padding-bottom: 0; text-indent: 0; background: transparent; font-family: "Arial"; font-size: 10.5pt; font-weight: normal; font-style: normal; }
.cmd_code { text-align: left; font-family: "Courier New"; }
.table_body { font-style: italic; }
.table_header { text-align: center; }
/* Footnotes & endnotes */
#webpub_footnotes_divider { clear: both; margin-top: 2em; width: 25%; border-top: 1px solid black; }
#webpub_footnotes { font-size: 80%; text-align: justify; }
#webpub_footnotes td.label { text-align: right; vertical-align: top; }
#webpub_footnotes td.content { }
a.webpub_footnote { font-size: 80%; vertical-align: super; }
#webpub_endnotes_divider { clear: both; margin-top: 2em; width: 25%; border-top: 3px double black; }
#webpub_endnotes { font-size: 80%; text-align: justify; }
#webpub_endnotes td.label { text-align: right; vertical-align: top; }
#webpub_endnotes td.content { }
a.webpub_endnote { font-size: 80%; vertical-align: super; }
</style>
</head>
<body>
<p class="Heading_1">10. <a name="_programming examples"></a>Programming examples</p>
<p class="Heading_2">10.1. Set channel output values and working with the OCP</p>
<p>This is a SCPI commands sequence that sets a voltage, current, and the over-current protection (OCP) on the channel two:</p>
<p> </p>
<table style="border-collapse: collapse; background: transparent; width: 175.02mm;">
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">INST?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check currently selected output</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">1</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">INST CH2</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Select channel two as current channel</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">VOLT 10</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Set output voltage</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Set output current</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR:PROT:STAT?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check OCP status</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">0</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR:PROT:STAT 1</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Enable OCP</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR:PROT:DEL 100ms</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Set OCP delay</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP 1</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Enable output</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">MEAS?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Measure output voltage</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">10.00</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">MEAS:CURR?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Measure output current</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">0.00</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Current is zero since no load is connected</p>
</td>
</tr>
</table>
<p> </p>
<p>If <a href="http://www.envox.hr/eez/bench-power-supply/psu-digital-control/psu-scpi-reference-manual/psu-scpi-simulator.html"><span style="text-decoration: underline;">soft</span></a><a href="http://www.envox.hr/eez/bench-power-supply/psu-scpi-reference-manual/psu-scpi-simulator.html"><span style="text-decoration: underline;">ware simulator</span></a> is used, connection of the load can be also simulated:</p>
<p> </p>
<table style="border-collapse: collapse; background: transparent; width: 175.02mm;">
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">SIMU:LOAD 20</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Define connected load impedance</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">MEAS?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Measure voltage once again</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">10.00</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">MEAS:CURR?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Measure current once again</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">0.50</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Measured current</p>
</td>
</tr>
</table>
<p> </p>
<p>The following command sequence could be used to test channel mode with load previously defined and after the load impedance is lowered enough that output current reach programmed value. The OCP has to be disabled because previously defined 100ms delay does not give us enough time to execute the whole sequence for testing channel mode and output voltage and current values:</p>
<p> </p>
<table style="border-collapse: collapse; background: transparent; width: 175.02mm;">
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP:MODE?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check mode of operation</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">"CV"</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">The channel is in constant-voltage mode since output current is below previously programmed level</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">SIMU:LOAD?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check load value</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">10</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR:PROT:STAT?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check OCP status</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">1</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR:PROT:STAT OFF</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Disable OCP</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">SIMU:LOAD 4</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Decrease load impedance</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP:MODE?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check once again mode of operation</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">"CC"</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Channel enters constant-current mode since I<span style="vertical-align: sub;">max</span> = U / R = 10 / 4 = 2.5A and current is limited to the 1A</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">MEAS:CURR?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Measure output current</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">1.00</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">MEAS?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Measure output voltage</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">4.00</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Output voltage is decreased since U = I * R = 1 * 4 = 4V</p>
</td>
</tr>
</table>
<p> </p>
<p>The OCP will “trip” when output current reach programmed value and channel stay in the CC mode for more then programmed OCP delay time. To test that with e.g. the <a href="http://www.envox.hr/eez/bench-power-supply/psu-scpi-reference-manual/psu-scpi-simulator.html"><span style="text-decoration: underline;">software simulator</span></a> we’ll disable channel output first, enable OCP and when change channel output back to enabled state:</p>
<p> </p>
<table style="border-collapse: collapse; background: transparent; width: 175.02mm;">
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP OFF</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Disable channel output</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR:PROT:TRIP?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check OCP status</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">0</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">OCP is not activated</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR:PROT:STAT ON</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Enable OCP</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">VOLT?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check programmed output voltage</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">10.00</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check programmed output current</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">1.00</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">SIMU:LOAD?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check simulated load value</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">4</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP ON</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Enable channel output</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR:PROT:TRIP?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check OCP status once again</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">1</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">OCP has been tripped</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check channel output state</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">0</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Channel output is changed to OFF stated by the OCP</p>
</td>
</tr>
</table>
<p> </p>
<p>The channel output state cannot be changed to enabled until any of protection is active. We have to clear protection first. If the same load that caused the first protection trip is still connected the channel output will be disabled immediately after the protection programmed delay time expired. Therefore we also have to disconnect load or disable protection. The later method will be used in the command sequence that follows:</p>
<p> </p>
<table style="border-collapse: collapse; background: transparent; width: 169.92mm;">
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP ON</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">First attempt to enable channel output</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">0</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">This attempt failed, the channel output remain disabled</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP:PROT:CLE</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Channel protections reset</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP ON</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Second to enable channel output</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">0</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Channel output was enabled for a short time (100ms) and returns back to OFF state</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR:PROT:TRIP?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Check OCP status</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">1</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">OCP has been tripped</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP:PROT:CLE</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Reset channel protections once again</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">CURR:PROT:STAT OFF</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Disable OCP</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP ON</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Third attempt to enable channel output</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">1</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Output is finally enabled</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">OUTP:MODE?</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 27%;">
<p class="cmd_code">"CC"</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 73%;">
<p class="table_body">Channel enters CC mode of operation </p>
</td>
</tr>
</table>
<p class="Heading_2">10.2. <a name="__RefHeading__270367_2069274779"></a><a name="calibration"></a>Voltage and current calibration<a name="__RefHeading__270367_2069274779"></a></p>
<p>For optimum calibration results the following condition are recommended:</p>
<ul>
<li class="List_1_Start" style="text-indent: 0; list-style-type: disc;">the calibration ambient temperature is stable and between 20 °C and 30 °C.</li>
<li class="List_1" style="text-indent: 0; list-style-type: disc;">ambient relative humidity is less than 80%.</li>
<li class="List_1" style="text-indent: 0; list-style-type: disc;">Allow a one hour warm-up period before verification or calibration (use e.g. SYST:CHAN:INFO:ONT:LAST? or SYST:CPU:INFO:ONT:LAST? to get that info).</li>
<li class="List_1_End" style="text-indent: 0; list-style-type: disc;">Use short and thick cables to connect test setups.</li>
</ul>
<table style="border-collapse: collapse; background: transparent; width: 175.02mm;">
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background-color: #ffcc00; width: 6%;">
<p class="table_header">Step</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background-color: #ffcc00; width: 28%;">
<p class="table_header">Commands</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background-color: #ffcc00; width: 65%;">
<p class="table_header">Description</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 6%;">
<p style="text-align: center;">1</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 28%;">
<p class="cmd_code">*RST</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 65%;">
<p class="table_body"> </p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 6%;">
<p style="text-align: center;">2</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 28%;">
<p class="cmd_code">SYST:RWL</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 65%;">
<p class="table_body">Make sure that PSU is in remote mode and cannot be unlock from local console (TFT display)</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 6%;">
<p style="text-align: center;">3</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 28%;">
<p class="cmd_code">INST {CH1|CH2}; OUTP ON</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 65%;">
<p class="table_body">Select the channel to be calibrated and enable the channel output.</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 6%;">
<p style="text-align: center;">4</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 28%;">
<p class="cmd_code">VOLT:PROT:STAT OFF</p>
<p class="cmd_code">CURR:PROT:STAT OFF</p>
<p class="cmd_code">POW:PROT:STAT OFF</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 65%;">
<p class="table_body">Disable if required the voltage, current and power protections.</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 6%;">
<p style="text-align: center;">5</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 28%;">
<p class="cmd_code">CAL ON, "<password>"</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 65%;">
<p class="table_body">PSU enters calibration mode on the channel selected in step 1. Both voltage and current on the selected channel are set to the MINimum value. The VOLT? and CURR? commands can be optionally used here to test channel output values.</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 6%;">
<p style="text-align: center;">6</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 28%;">
<p class="cmd_code"> </p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 65%;">
<p class="table_body">For voltage calibration, connect a digital voltmeter (DVM) across the PSU’s output terminals.</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 6%;">
<p style="text-align: center;">7</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 28%;">
<p class="cmd_code">CAL:VOLT:LEV MIN</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 65%;">
<p class="table_body">Set the channel to the low-end (MIN) calibration point.</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 6%;">
<p style="text-align: center;">8</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 28%;">
<p class="cmd_code">CAL:VOLT 81.8MV</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 65%;">
<p class="table_body">Enter the reading you obtained from the external DVM.</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 6%;">
<p style="text-align: center;">9</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 28%;">
<p class="cmd_code">CAL:VOLT:LEV MID</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 65%;">
<p class="table_body">Set the channel to the middle (MID) calibration point.</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 6%;">
<p style="text-align: center;">10</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 28%;">
<p class="cmd_code">CAL:VOLT 19.68</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 65%;">
<p class="table_body">Enter the reading you obtained from the DVM.</p>
</td>
</tr>
<tr style="background: transparent;">
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 6%;">
<p style="text-align: center;">11</p>
</td>
<td style="border-left: 0; border-right: 0; border-top: 0; border-bottom: 0; vertical-align: top; background: transparent; width: 28%;">
gitextract_hwkf52p7/ ├── .gitignore ├── CONTRIB.TXT ├── LICENSE.TXT ├── build-arduino-library.py ├── build.py ├── doc/ │ ├── Doxyfile │ ├── SCPI reference guide/ │ │ ├── Commands/ │ │ │ ├── EEZ PSU SCPI reference 1 - introduction.html │ │ │ ├── EEZ PSU SCPI reference 10 - Programming examples.html │ │ │ ├── EEZ PSU SCPI reference 12 - SCPI commands summary.html │ │ │ ├── EEZ PSU SCPI reference 2 - syntax and style.html │ │ │ ├── EEZ PSU SCPI reference 3 - registers and queue.html │ │ │ ├── EEZ PSU SCPI reference 4 - common comand reference.html │ │ │ ├── EEZ PSU SCPI reference 5.1 - ABORt.html │ │ │ ├── EEZ PSU SCPI reference 5.10 - MMEMory.html │ │ │ ├── EEZ PSU SCPI reference 5.11 - OUTPut.html │ │ │ ├── EEZ PSU SCPI reference 5.12 - SENSe.html │ │ │ ├── EEZ PSU SCPI reference 5.13 - SOURce.html │ │ │ ├── EEZ PSU SCPI reference 5.14 - STATus.html │ │ │ ├── EEZ PSU SCPI reference 5.15 - SYSTem.html │ │ │ ├── EEZ PSU SCPI reference 5.16 - TRIGger.html │ │ │ ├── EEZ PSU SCPI reference 5.2 - CALibrate.html │ │ │ ├── EEZ PSU SCPI reference 5.3 - DIAGnostic.html │ │ │ ├── EEZ PSU SCPI reference 5.4 - DISPlay.html │ │ │ ├── EEZ PSU SCPI reference 5.5 - FETCh.html │ │ │ ├── EEZ PSU SCPI reference 5.6 - INITiate.html │ │ │ ├── EEZ PSU SCPI reference 5.7 - INSTrument.html │ │ │ ├── EEZ PSU SCPI reference 5.8 - MEASure.html │ │ │ ├── EEZ PSU SCPI reference 5.9 - MEMory.html │ │ │ ├── EEZ PSU SCPI reference 6 - Device-specific commands.html │ │ │ ├── EEZ PSU SCPI reference 7 - Error messages.html │ │ │ ├── EEZ PSU SCPI reference 8 - Parameters and settings.html │ │ │ └── EEZ PSU SCPI reference 9 - Software simulator.html │ │ ├── EEZ PSU SCPI reference - last page.odt │ │ ├── EEZ PSU SCPI reference - start page.odt │ │ ├── EEZ PSU SCPI reference 1 - introduction.odt │ │ ├── EEZ PSU SCPI reference 10 - Programming examples.odt │ │ ├── EEZ PSU SCPI reference 11 - SCPI commands scheduled for upcoming releases.odt │ │ ├── EEZ PSU SCPI reference 12 - SCPI commands summary.odt │ │ ├── EEZ PSU SCPI reference 2 - syntax and style.odt │ │ ├── EEZ PSU SCPI reference 3 - registers and queue.odt │ │ ├── EEZ PSU SCPI reference 4 - common comand reference.odt │ │ ├── EEZ PSU SCPI reference 5.1 - ABORt (pdf).odt │ │ ├── EEZ PSU SCPI reference 5.1 - ABORt.odt │ │ ├── EEZ PSU SCPI reference 5.10 - MMEMory.odt │ │ ├── EEZ PSU SCPI reference 5.11 - OUTPut.odt │ │ ├── EEZ PSU SCPI reference 5.12 - SENSe.odt │ │ ├── EEZ PSU SCPI reference 5.13 - SOURce.odt │ │ ├── EEZ PSU SCPI reference 5.14 - STATus.odt │ │ ├── EEZ PSU SCPI reference 5.15 - SYSTem.odt │ │ ├── EEZ PSU SCPI reference 5.16 - TRIGger.odt │ │ ├── EEZ PSU SCPI reference 5.2 - CALibrate.odt │ │ ├── EEZ PSU SCPI reference 5.3 - DIAGnostic.odt │ │ ├── EEZ PSU SCPI reference 5.4 - DISPlay.odt │ │ ├── EEZ PSU SCPI reference 5.5 - FETCh.odt │ │ ├── EEZ PSU SCPI reference 5.6 - INITiate.odt │ │ ├── EEZ PSU SCPI reference 5.7 - INSTrument.odt │ │ ├── EEZ PSU SCPI reference 5.8 - MEASure.odt │ │ ├── EEZ PSU SCPI reference 5.9 - MEMory.odt │ │ ├── EEZ PSU SCPI reference 5.odt │ │ ├── EEZ PSU SCPI reference 6 - Device-specific commands.odt │ │ ├── EEZ PSU SCPI reference 7 - Error messages.odt │ │ ├── EEZ PSU SCPI reference 8 - Parameters and settings.odt │ │ ├── EEZ PSU SCPI reference 9 - Software simulator.odt │ │ ├── EEZ PSU SCPI reference guide.odm │ │ └── Registers/ │ │ └── SCPI registers (v1.1).sch │ ├── architecture.odg │ ├── build.bat │ ├── components.dot │ ├── files.md │ └── template/ │ ├── customdoxygen.css │ ├── doxy-boot.js │ ├── footer.html │ └── header.html ├── eez_psu_sketch/ │ ├── .gitignore │ ├── actions.cpp │ ├── actions.h │ ├── adc.cpp │ ├── adc.h │ ├── arduino_psu.h │ ├── arduino_util.cpp │ ├── arduino_util.h │ ├── board.cpp │ ├── board.h │ ├── bp.cpp │ ├── bp.h │ ├── buzzer.cpp │ ├── buzzer.h │ ├── calibration.cpp │ ├── calibration.h │ ├── channel.cpp │ ├── channel.h │ ├── channel_dispatcher.cpp │ ├── channel_dispatcher.h │ ├── conf.h │ ├── conf_advanced.h │ ├── conf_channel.h │ ├── conf_user.h │ ├── conf_user_revision.h │ ├── dac.cpp │ ├── dac.h │ ├── datetime.cpp │ ├── datetime.h │ ├── debug.cpp │ ├── debug.h │ ├── devices.cpp │ ├── devices.h │ ├── dlog.cpp │ ├── dlog.h │ ├── eeprom.cpp │ ├── eeprom.h │ ├── eez_psu_sketch.ino │ ├── eez_psu_sketch.sln │ ├── eez_psu_sketch.vcxproj │ ├── eez_psu_sketch.vcxproj.filters │ ├── encoder.cpp │ ├── encoder.h │ ├── ethernet.cpp │ ├── ethernet.h │ ├── event_queue.cpp │ ├── event_queue.h │ ├── fan.cpp │ ├── fan.h │ ├── font.cpp │ ├── font.h │ ├── gesture.cpp │ ├── gesture.h │ ├── gui.cpp │ ├── gui.h │ ├── gui_calibration.cpp │ ├── gui_calibration.h │ ├── gui_data.cpp │ ├── gui_data.h │ ├── gui_document.cpp │ ├── gui_document.h │ ├── gui_edit_mode.cpp │ ├── gui_edit_mode.h │ ├── gui_edit_mode_keypad.cpp │ ├── gui_edit_mode_keypad.h │ ├── gui_edit_mode_slider.cpp │ ├── gui_edit_mode_slider.h │ ├── gui_edit_mode_step.cpp │ ├── gui_edit_mode_step.h │ ├── gui_internal.h │ ├── gui_keypad.cpp │ ├── gui_keypad.h │ ├── gui_numeric_keypad.cpp │ ├── gui_numeric_keypad.h │ ├── gui_page.cpp │ ├── gui_page.h │ ├── gui_page_ch_settings_adv.cpp │ ├── gui_page_ch_settings_adv.h │ ├── gui_page_ch_settings_info.cpp │ ├── gui_page_ch_settings_info.h │ ├── gui_page_ch_settings_protection.cpp │ ├── gui_page_ch_settings_protection.h │ ├── gui_page_ch_settings_trigger.cpp │ ├── gui_page_ch_settings_trigger.h │ ├── gui_page_event_queue.cpp │ ├── gui_page_event_queue.h │ ├── gui_page_main.cpp │ ├── gui_page_main.h │ ├── gui_page_self_test_result.cpp │ ├── gui_page_self_test_result.h │ ├── gui_page_sys_info.cpp │ ├── gui_page_sys_info.h │ ├── gui_page_sys_settings.cpp │ ├── gui_page_sys_settings.h │ ├── gui_page_user_profiles.cpp │ ├── gui_page_user_profiles.h │ ├── gui_password.cpp │ ├── gui_password.h │ ├── gui_view.cpp │ ├── gui_view.h │ ├── gui_widget_button_group.cpp │ ├── gui_widget_button_group.h │ ├── idle.cpp │ ├── idle.h │ ├── io_pins.cpp │ ├── io_pins.h │ ├── ioexp.cpp │ ├── ioexp.h │ ├── lcd.cpp │ ├── lcd.h │ ├── list.cpp │ ├── list.h │ ├── ntp.cpp │ ├── ntp.h │ ├── ontime.cpp │ ├── ontime.h │ ├── persist_conf.cpp │ ├── persist_conf.h │ ├── pid.cpp │ ├── pid.h │ ├── profile.cpp │ ├── profile.h │ ├── psu.cpp │ ├── psu.h │ ├── rtc.cpp │ ├── rtc.h │ ├── scpi_appl.cpp │ ├── scpi_cal.cpp │ ├── scpi_commands.h │ ├── scpi_core.cpp │ ├── scpi_debug.cpp │ ├── scpi_diag.cpp │ ├── scpi_display.cpp │ ├── scpi_dlog.cpp │ ├── scpi_inst.cpp │ ├── scpi_meas.cpp │ ├── scpi_mem.cpp │ ├── scpi_mmem.cpp │ ├── scpi_outp.cpp │ ├── scpi_params.cpp │ ├── scpi_params.h │ ├── scpi_psu.cpp │ ├── scpi_psu.h │ ├── scpi_regs.cpp │ ├── scpi_regs.h │ ├── scpi_sense.cpp │ ├── scpi_simu.cpp │ ├── scpi_sour.cpp │ ├── scpi_stat.cpp │ ├── scpi_syst.cpp │ ├── scpi_trigger.cpp │ ├── scpi_user_config.h │ ├── sd_card.cpp │ ├── sd_card.h │ ├── serial_psu.cpp │ ├── serial_psu.h │ ├── sound.cpp │ ├── sound.h │ ├── temp_sensor.cpp │ ├── temp_sensor.h │ ├── temperature.cpp │ ├── temperature.h │ ├── timer.cpp │ ├── timer.h │ ├── touch.cpp │ ├── touch.h │ ├── touch_calibration.cpp │ ├── touch_calibration.h │ ├── touch_filter.cpp │ ├── touch_filter.h │ ├── trigger.cpp │ ├── trigger.h │ ├── util.cpp │ ├── util.h │ ├── value.cpp │ ├── value.h │ ├── watchdog.cpp │ └── watchdog.h ├── fonts/ │ └── bdf/ │ ├── FontAwesome.14.bdf │ ├── Oswald-Medium.14.bdf │ ├── Oswald-Medium.24.bdf │ ├── Oswald-Medium.38.bdf │ ├── Oswald-Medium.48.bdf │ ├── heydings_icons.14.bdf │ ├── webhostinghub-glyphs.14.bdf │ └── webhostinghub-glyphs.24.bdf ├── issue_template.md ├── libraries/ │ ├── eez_psu_lib/ │ │ ├── library.properties │ │ └── src/ │ │ ├── R1B9/ │ │ │ ├── R1B9_init.cpp │ │ │ └── R1B9_pins.h │ │ ├── R3B4/ │ │ │ ├── R3B4_init.cpp │ │ │ └── R3B4_pins.h │ │ ├── R5B12/ │ │ │ ├── R5B12_init.cpp │ │ │ └── R5B12_pins.h │ │ ├── eez_psu.cpp │ │ ├── eez_psu.h │ │ └── eez_psu_rev.h │ ├── readme.md │ └── scpi-parser/ │ ├── library.properties │ └── src/ │ ├── impl/ │ │ ├── error.c │ │ ├── expression.c │ │ ├── fifo.c │ │ ├── fifo_private.h │ │ ├── ieee488.c │ │ ├── lexer.c │ │ ├── lexer_private.h │ │ ├── minimal.c │ │ ├── parser.c │ │ ├── parser_private.h │ │ ├── scpi.g │ │ ├── units.c │ │ ├── utils.c │ │ └── utils_private.h │ ├── scpi/ │ │ ├── config.h │ │ ├── constants.h │ │ ├── error.h │ │ ├── expression.h │ │ ├── ieee488.h │ │ ├── minimal.h │ │ ├── parser.h │ │ ├── scpi.h │ │ ├── scpi_user_config.h │ │ ├── types.h │ │ ├── units.h │ │ └── utils.h │ └── scpi-parser.h ├── platformio.ini ├── psu.eez-project ├── readme.md ├── simulator/ │ ├── platform/ │ │ ├── linux/ │ │ │ ├── .gitignore │ │ │ ├── Makefile │ │ │ ├── src/ │ │ │ │ ├── ethernet_linux.cpp │ │ │ │ └── main_loop.cpp │ │ │ └── third_party/ │ │ │ ├── thread_queue.c │ │ │ └── thread_queue.h │ │ └── win32/ │ │ ├── .gitignore │ │ ├── eez_imgui/ │ │ │ ├── .gitignore │ │ │ ├── eez_imgui.sln │ │ │ ├── eez_imgui.vcxproj │ │ │ └── eez_imgui.vcxproj.filters │ │ ├── eez_psu_sim/ │ │ │ ├── .gitignore │ │ │ ├── eez_psu_sim.rc │ │ │ ├── eez_psu_sim.vcxproj │ │ │ ├── eez_psu_sim.vcxproj.filters │ │ │ ├── ethernet_win32.cpp │ │ │ ├── main_loop.cpp │ │ │ └── resource.h │ │ ├── eez_psu_sim.sln │ │ ├── installation_script.iss │ │ └── third_party/ │ │ ├── SDL2/ │ │ │ ├── BUGS.txt │ │ │ ├── COPYING.txt │ │ │ ├── README-SDL.txt │ │ │ ├── README.txt │ │ │ ├── WhatsNew.txt │ │ │ └── include/ │ │ │ ├── SDL.h │ │ │ ├── SDL_assert.h │ │ │ ├── SDL_atomic.h │ │ │ ├── SDL_audio.h │ │ │ ├── SDL_bits.h │ │ │ ├── SDL_blendmode.h │ │ │ ├── SDL_clipboard.h │ │ │ ├── SDL_config.h │ │ │ ├── SDL_config.h.cmake │ │ │ ├── SDL_config.h.in │ │ │ ├── SDL_config_android.h │ │ │ ├── SDL_config_iphoneos.h │ │ │ ├── SDL_config_macosx.h │ │ │ ├── SDL_config_minimal.h │ │ │ ├── SDL_config_pandora.h │ │ │ ├── SDL_config_psp.h │ │ │ ├── SDL_config_windows.h │ │ │ ├── SDL_config_winrt.h │ │ │ ├── SDL_config_wiz.h │ │ │ ├── SDL_copying.h │ │ │ ├── SDL_cpuinfo.h │ │ │ ├── SDL_egl.h │ │ │ ├── SDL_endian.h │ │ │ ├── SDL_error.h │ │ │ ├── SDL_events.h │ │ │ ├── SDL_filesystem.h │ │ │ ├── SDL_gamecontroller.h │ │ │ ├── SDL_gesture.h │ │ │ ├── SDL_haptic.h │ │ │ ├── SDL_hints.h │ │ │ ├── SDL_joystick.h │ │ │ ├── SDL_keyboard.h │ │ │ ├── SDL_keycode.h │ │ │ ├── SDL_loadso.h │ │ │ ├── SDL_log.h │ │ │ ├── SDL_main.h │ │ │ ├── SDL_messagebox.h │ │ │ ├── SDL_mouse.h │ │ │ ├── SDL_mutex.h │ │ │ ├── SDL_name.h │ │ │ ├── SDL_opengl.h │ │ │ ├── SDL_opengles.h │ │ │ ├── SDL_opengles2.h │ │ │ ├── SDL_pixels.h │ │ │ ├── SDL_platform.h │ │ │ ├── SDL_power.h │ │ │ ├── SDL_quit.h │ │ │ ├── SDL_rect.h │ │ │ ├── SDL_render.h │ │ │ ├── SDL_revision.h │ │ │ ├── SDL_rwops.h │ │ │ ├── SDL_scancode.h │ │ │ ├── SDL_shape.h │ │ │ ├── SDL_stdinc.h │ │ │ ├── SDL_surface.h │ │ │ ├── SDL_system.h │ │ │ ├── SDL_syswm.h │ │ │ ├── SDL_test.h │ │ │ ├── SDL_test_assert.h │ │ │ ├── SDL_test_common.h │ │ │ ├── SDL_test_compare.h │ │ │ ├── SDL_test_crc32.h │ │ │ ├── SDL_test_font.h │ │ │ ├── SDL_test_fuzzer.h │ │ │ ├── SDL_test_harness.h │ │ │ ├── SDL_test_images.h │ │ │ ├── SDL_test_log.h │ │ │ ├── SDL_test_md5.h │ │ │ ├── SDL_test_random.h │ │ │ ├── SDL_thread.h │ │ │ ├── SDL_timer.h │ │ │ ├── SDL_touch.h │ │ │ ├── SDL_types.h │ │ │ ├── SDL_version.h │ │ │ ├── SDL_video.h │ │ │ ├── begin_code.h │ │ │ ├── close_code.h │ │ │ └── doxyfile │ │ ├── SDL2_image/ │ │ │ ├── CHANGES.txt │ │ │ ├── COPYING.txt │ │ │ ├── README.txt │ │ │ └── include/ │ │ │ └── SDL_image.h │ │ └── SDL2_ttf/ │ │ ├── CHANGES.txt │ │ ├── COPYING.txt │ │ ├── README.txt │ │ └── include/ │ │ └── SDL_ttf.h │ ├── readme.md │ └── src/ │ ├── arduino/ │ │ ├── Arduino.h │ │ ├── SPI.h │ │ ├── SdFat.cpp │ │ ├── SdFat.h │ │ ├── UTFT.cpp │ │ ├── UTFT.h │ │ ├── arduino_impl.cpp │ │ └── arduino_internal.h │ ├── chips/ │ │ ├── chips.cpp │ │ └── chips.h │ ├── dll.h │ ├── ethernet/ │ │ ├── EthernetUdp2.cpp │ │ ├── EthernetUdp2.h │ │ ├── UIPClient.h │ │ ├── UIPEthernet.h │ │ ├── UIPServer.h │ │ ├── ethernet_platform.h │ │ └── uipethernet_impl.cpp │ ├── front_panel/ │ │ ├── control.cpp │ │ ├── control.h │ │ ├── data.cpp │ │ ├── data.h │ │ ├── render.cpp │ │ └── render.h │ ├── imgui/ │ │ ├── beeper.cpp │ │ ├── beeper.h │ │ ├── texture.cpp │ │ ├── texture.h │ │ ├── window.cpp │ │ ├── window.h │ │ └── window_impl.h │ ├── main.cpp │ ├── main_loop.h │ ├── simulator_conf.h │ ├── simulator_psu.cpp │ ├── simulator_psu.h │ └── thread.h └── sketch_build.bat
Showing preview only (258K chars total). Download the full file or copy to clipboard to get everything.
SYMBOL INDEX (2658 symbols across 267 files)
FILE: build-arduino-library.py
function rm_then_cp (line 33) | def rm_then_cp(src, dest, ignoreRootDirs=None):
function build_scpi_parser_lib (line 45) | def build_scpi_parser_lib(libscpi_dir, scpi_parser_dir):
function build_UIPEthernet_lib (line 75) | def build_UIPEthernet_lib(arduino_uip_dir, UIPEthernet_dir):
function build_Ethernet2_lib (line 78) | def build_Ethernet2_lib(arduino_Ethernet2_dir, Ethernet2_dir):
function copy_lib (line 81) | def copy_lib(src_lib_dir, dst_name):
FILE: doc/template/doxy-boot.js
function getOriginalWidthOfImg (line 83) | function getOriginalWidthOfImg(img_element) {
FILE: eez_psu_sketch/actions.cpp
type eez (line 41) | namespace eez {
type psu (line 42) | namespace psu {
function action_channel_toggle_output (line 46) | void action_channel_toggle_output() {
function action_edit (line 50) | void action_edit() {
function action_edit_mode_slider (line 54) | void action_edit_mode_slider() {
function action_edit_mode_step (line 58) | void action_edit_mode_step() {
function action_edit_mode_keypad (line 62) | void action_edit_mode_keypad() {
function action_exit_edit_mode (line 66) | void action_exit_edit_mode() {
function action_toggle_interactive_mode (line 72) | void action_toggle_interactive_mode() {
function action_non_interactive_enter (line 76) | void action_non_interactive_enter() {
function action_non_interactive_discard (line 80) | void action_non_interactive_discard() {
function action_keypad_key (line 84) | void action_keypad_key() {
function action_keypad_space (line 88) | void action_keypad_space() {
function action_keypad_back (line 92) | void action_keypad_back() {
function action_keypad_clear (line 96) | void action_keypad_clear() {
function action_keypad_caps (line 100) | void action_keypad_caps() {
function action_keypad_ok (line 104) | void action_keypad_ok() {
function action_keypad_cancel (line 108) | void action_keypad_cancel() {
function action_keypad_sign (line 112) | void action_keypad_sign() {
function action_keypad_unit (line 116) | void action_keypad_unit() {
function action_keypad_option1 (line 120) | void action_keypad_option1() {
function action_keypad_option2 (line 124) | void action_keypad_option2() {
function action_touch_screen_calibration (line 128) | void action_touch_screen_calibration() {
function action_yes (line 132) | void action_yes() {
function action_no (line 136) | void action_no() {
function action_ok (line 140) | void action_ok() {
function action_cancel (line 144) | void action_cancel() {
function action_later (line 148) | void action_later() {
function action_stand_by (line 152) | void action_stand_by() {
function action_show_previous_page (line 156) | void action_show_previous_page() {
function action_show_main_page (line 160) | void action_show_main_page() {
function action_show_event_queue (line 164) | void action_show_event_queue() {
function action_show_channel_settings (line 168) | void action_show_channel_settings() {
function action_show_sys_settings (line 173) | void action_show_sys_settings() {
function action_show_sys_settings2 (line 177) | void action_show_sys_settings2() {
function action_show_sys_settings_trigger (line 181) | void action_show_sys_settings_trigger() {
function action_show_sys_settings_io (line 185) | void action_show_sys_settings_io() {
function action_show_sys_settings_date_time (line 189) | void action_show_sys_settings_date_time() {
function action_show_sys_settings_cal (line 193) | void action_show_sys_settings_cal() {
function action_show_sys_settings_cal_ch (line 197) | void action_show_sys_settings_cal_ch() {
function action_show_sys_settings_screen_calibration (line 202) | void action_show_sys_settings_screen_calibration() {
function action_show_sys_settings_display (line 206) | void action_show_sys_settings_display() {
function action_show_sys_settings_serial (line 210) | void action_show_sys_settings_serial() {
function action_show_sys_settings_ethernet (line 214) | void action_show_sys_settings_ethernet() {
function action_show_sys_settings_protections (line 218) | void action_show_sys_settings_protections() {
function action_show_sys_settings_aux_otp (line 222) | void action_show_sys_settings_aux_otp() {
function action_show_sys_settings_sound (line 226) | void action_show_sys_settings_sound() {
function action_show_sys_settings_encoder (line 230) | void action_show_sys_settings_encoder() {
function action_show_sys_info (line 234) | void action_show_sys_info() {
function action_show_sys_info2 (line 238) | void action_show_sys_info2() {
function action_show_main_help_page (line 242) | void action_show_main_help_page() {
function action_show_edit_mode_step_help (line 246) | void action_show_edit_mode_step_help() {
function action_show_edit_mode_slider_help (line 250) | void action_show_edit_mode_slider_help() {
function action_show_ch_settings_prot (line 254) | void action_show_ch_settings_prot() {
function action_show_ch_settings_prot_clear (line 258) | void action_show_ch_settings_prot_clear() {
function action_show_ch_settings_prot_ocp (line 263) | void action_show_ch_settings_prot_ocp() {
function action_show_ch_settings_prot_ovp (line 268) | void action_show_ch_settings_prot_ovp() {
function action_show_ch_settings_prot_opp (line 273) | void action_show_ch_settings_prot_opp() {
function action_show_ch_settings_prot_otp (line 278) | void action_show_ch_settings_prot_otp() {
function action_show_ch_settings_trigger (line 283) | void action_show_ch_settings_trigger() {
function action_show_ch_settings_lists (line 287) | void action_show_ch_settings_lists() {
function action_show_ch_settings_adv (line 291) | void action_show_ch_settings_adv() {
function action_show_ch_settings_adv_lripple (line 295) | void action_show_ch_settings_adv_lripple() {
function action_show_ch_settings_adv_remote (line 300) | void action_show_ch_settings_adv_remote() {
function action_show_ch_settings_adv_ranges (line 304) | void action_show_ch_settings_adv_ranges() {
function action_show_ch_settings_adv_tracking (line 308) | void action_show_ch_settings_adv_tracking() {
function action_show_ch_settings_adv_coupling (line 312) | void action_show_ch_settings_adv_coupling() {
function action_show_ch_settings_adv_view (line 316) | void action_show_ch_settings_adv_view() {
function action_show_ch_settings_info (line 320) | void action_show_ch_settings_info() {
function action_show_ch_settings_info_cal (line 324) | void action_show_ch_settings_info_cal() {
function action_sys_settings_cal_edit_password (line 328) | void action_sys_settings_cal_edit_password() {
function action_sys_settings_cal_ch_wiz_start (line 332) | void action_sys_settings_cal_ch_wiz_start() {
function action_sys_settings_cal_ch_wiz_step_previous (line 336) | void action_sys_settings_cal_ch_wiz_step_previous() {
function action_sys_settings_cal_ch_wiz_step_next (line 340) | void action_sys_settings_cal_ch_wiz_step_next() {
function action_sys_settings_cal_ch_wiz_stop_and_show_previous_page (line 344) | void action_sys_settings_cal_ch_wiz_stop_and_show_previous_page() {
function action_sys_settings_cal_ch_wiz_stop_and_show_main_page (line 348) | void action_sys_settings_cal_ch_wiz_stop_and_show_main_page() {
function action_sys_settings_cal_ch_wiz_step_set (line 352) | void action_sys_settings_cal_ch_wiz_step_set() {
function action_sys_settings_cal_ch_wiz_step_set_level_value (line 356) | void action_sys_settings_cal_ch_wiz_step_set_level_value() {
function action_sys_settings_cal_ch_wiz_save (line 360) | void action_sys_settings_cal_ch_wiz_save() {
function action_sys_settings_cal_toggle_enable (line 364) | void action_sys_settings_cal_toggle_enable() {
function action_ch_settings_prot_clear (line 368) | void action_ch_settings_prot_clear() {
function action_ch_settings_prot_clear_and_disable (line 372) | void action_ch_settings_prot_clear_and_disable() {
function action_ch_settings_prot_toggle_state (line 376) | void action_ch_settings_prot_toggle_state() {
function action_ch_settings_prot_edit_limit (line 380) | void action_ch_settings_prot_edit_limit() {
function action_ch_settings_prot_edit_level (line 384) | void action_ch_settings_prot_edit_level() {
function action_ch_settings_prot_edit_delay (line 388) | void action_ch_settings_prot_edit_delay() {
function action_set (line 392) | void action_set() {
function action_discard (line 396) | void action_discard() {
function action_edit_field (line 400) | void action_edit_field() {
function action_event_queue_previous_page (line 404) | void action_event_queue_previous_page() {
function action_event_queue_next_page (line 408) | void action_event_queue_next_page() {
function action_ch_settings_adv_lripple_toggle_status (line 412) | void action_ch_settings_adv_lripple_toggle_status() {
function action_ch_settings_adv_lripple_toggle_auto_mode (line 416) | void action_ch_settings_adv_lripple_toggle_auto_mode() {
function action_ch_settings_adv_remote_toggle_sense (line 420) | void action_ch_settings_adv_remote_toggle_sense() {
function action_ch_settings_adv_remote_toggle_programming (line 424) | void action_ch_settings_adv_remote_toggle_programming() {
function action_date_time_select_dst_rule (line 428) | void action_date_time_select_dst_rule() {
function action_show_user_profiles (line 432) | void action_show_user_profiles() {
function action_show_user_profiles2 (line 436) | void action_show_user_profiles2() {
function action_show_user_profile_settings (line 440) | void action_show_user_profile_settings() {
function action_profiles_toggle_auto_recall (line 444) | void action_profiles_toggle_auto_recall() {
function action_profile_toggle_is_auto_recall_location (line 448) | void action_profile_toggle_is_auto_recall_location() {
function action_profile_recall (line 452) | void action_profile_recall() {
function action_profile_save (line 456) | void action_profile_save() {
function action_profile_delete (line 460) | void action_profile_delete() {
function action_profile_edit_remark (line 464) | void action_profile_edit_remark() {
function action_toggle_channels_view_mode (line 468) | void action_toggle_channels_view_mode() {
function action_ethernet_toggle (line 472) | void action_ethernet_toggle() {
function action_ethernet_toggle_dhcp (line 478) | void action_ethernet_toggle_dhcp() {
function action_ethernet_edit_mac_address (line 484) | void action_ethernet_edit_mac_address() {
function action_ethernet_edit_static_address (line 490) | void action_ethernet_edit_static_address() {
function action_ethernet_edit_ip_address (line 496) | void action_ethernet_edit_ip_address() {
function action_ethernet_edit_dns (line 502) | void action_ethernet_edit_dns() {
function action_ethernet_edit_gateway (line 508) | void action_ethernet_edit_gateway() {
function action_ethernet_edit_subnet_mask (line 514) | void action_ethernet_edit_subnet_mask() {
function action_ethernet_edit_scpi_port (line 520) | void action_ethernet_edit_scpi_port() {
function action_ch_settings_adv_coupling_uncouple (line 526) | void action_ch_settings_adv_coupling_uncouple() {
function action_ch_settings_adv_coupling_set_parallel_info (line 530) | void action_ch_settings_adv_coupling_set_parallel_info() {
function action_ch_settings_adv_coupling_set_series_info (line 534) | void action_ch_settings_adv_coupling_set_series_info() {
function action_ch_settings_adv_coupling_set_parallel (line 538) | void action_ch_settings_adv_coupling_set_parallel() {
function action_ch_settings_adv_coupling_set_series (line 542) | void action_ch_settings_adv_coupling_set_series() {
function action_ch_settings_adv_toggle_tracking_mode (line 546) | void action_ch_settings_adv_toggle_tracking_mode() {
function action_sys_settings_protections_toggle_output_protection_couple (line 550) | void action_sys_settings_protections_toggle_output_protection_couple...
function action_sys_settings_protections_toggle_shutdown_when_protection_tripped (line 554) | void action_sys_settings_protections_toggle_shutdown_when_protection...
function action_sys_settings_protections_toggle_force_disabling_all_outputs_on_power_up (line 558) | void action_sys_settings_protections_toggle_force_disabling_all_outp...
function action_sys_settings_protections_aux_otp_toggle_state (line 562) | void action_sys_settings_protections_aux_otp_toggle_state() {
function action_sys_settings_protections_aux_otp_edit_level (line 566) | void action_sys_settings_protections_aux_otp_edit_level() {
function action_sys_settings_protections_aux_otp_edit_delay (line 570) | void action_sys_settings_protections_aux_otp_edit_delay() {
function action_sys_settings_protections_aux_otp_clear (line 574) | void action_sys_settings_protections_aux_otp_clear() {
function action_on_last_error_event_action (line 578) | void action_on_last_error_event_action() {
function action_edit_system_password (line 582) | void action_edit_system_password() {
function action_sys_front_panel_lock (line 586) | void action_sys_front_panel_lock() {
function action_sys_front_panel_unlock (line 590) | void action_sys_front_panel_unlock() {
function action_sys_settings_sound_toggle (line 594) | void action_sys_settings_sound_toggle() {
function action_sys_settings_sound_toggle_click (line 598) | void action_sys_settings_sound_toggle_click() {
function action_ch_settings_adv_view_edit_display_value1 (line 602) | void action_ch_settings_adv_view_edit_display_value1() {
function action_ch_settings_adv_view_edit_display_value2 (line 606) | void action_ch_settings_adv_view_edit_display_value2() {
function action_ch_settings_adv_view_swap_display_values (line 610) | void action_ch_settings_adv_view_swap_display_values() {
function action_ch_settings_adv_view_edit_ytview_rate (line 614) | void action_ch_settings_adv_view_edit_ytview_rate() {
function action_select_enum_item (line 618) | void action_select_enum_item() {
function action_error_alert_action (line 622) | void action_error_alert_action() {
function action_up_down (line 626) | void action_up_down() {
function action_sys_settings_encoder_toggle_confirmation_mode (line 630) | void action_sys_settings_encoder_toggle_confirmation_mode() {
function action_turn_display_off (line 636) | void action_turn_display_off() {
function action_ch_settings_trigger_edit_trigger_mode (line 640) | void action_ch_settings_trigger_edit_trigger_mode() {
function action_ch_settings_trigger_edit_voltage_trigger_value (line 644) | void action_ch_settings_trigger_edit_voltage_trigger_value() {
function action_ch_settings_trigger_edit_current_trigger_value (line 648) | void action_ch_settings_trigger_edit_current_trigger_value() {
function action_ch_settings_trigger_edit_list_count (line 652) | void action_ch_settings_trigger_edit_list_count() {
function action_ch_settings_trigger_toggle_output_state (line 656) | void action_ch_settings_trigger_toggle_output_state() {
function action_ch_settings_trigger_edit_on_list_stop (line 660) | void action_ch_settings_trigger_edit_on_list_stop() {
function action_channel_lists_previous_page (line 664) | void action_channel_lists_previous_page() {
function action_channel_lists_next_page (line 668) | void action_channel_lists_next_page() {
function action_channel_lists_edit (line 672) | void action_channel_lists_edit() {
function action_show_channel_lists_insert_menu (line 676) | void action_show_channel_lists_insert_menu() {
function action_show_channel_lists_delete_menu (line 680) | void action_show_channel_lists_delete_menu() {
function action_channel_lists_insert_row_above (line 684) | void action_channel_lists_insert_row_above() {
function action_channel_lists_insert_row_below (line 689) | void action_channel_lists_insert_row_below() {
function action_channel_lists_delete_row (line 694) | void action_channel_lists_delete_row() {
function action_channel_lists_clear_column (line 699) | void action_channel_lists_clear_column() {
function action_channel_lists_delete_rows (line 704) | void action_channel_lists_delete_rows() {
function action_channel_lists_delete_all (line 709) | void action_channel_lists_delete_all() {
function action_channel_initiate_trigger (line 714) | void action_channel_initiate_trigger() {
function action_channel_set_to_fixed (line 718) | void action_channel_set_to_fixed() {
function action_channel_enable_output (line 722) | void action_channel_enable_output() {
function action_trigger_select_source (line 726) | void action_trigger_select_source() {
function action_trigger_edit_delay (line 730) | void action_trigger_edit_delay() {
function action_trigger_toggle_initiate_continuously (line 734) | void action_trigger_toggle_initiate_continuously() {
function action_trigger_generate_manual (line 738) | void action_trigger_generate_manual() {
function action_trigger_show_general_settings (line 745) | void action_trigger_show_general_settings() {
function action_show_stand_by_menu (line 749) | void action_show_stand_by_menu() {
function action_reset (line 753) | void action_reset() {
function action_ch_settings_adv_ranges_select_mode (line 757) | void action_ch_settings_adv_ranges_select_mode() {
function action_ch_settings_adv_ranges_toggle_auto_ranging (line 761) | void action_ch_settings_adv_ranges_toggle_auto_ranging() {
function action_io_pin_toggle_polarity (line 765) | void action_io_pin_toggle_polarity() {
function action_io_pin_select_function (line 769) | void action_io_pin_select_function() {
function action_serial_toggle (line 773) | void action_serial_toggle() {
function action_serial_select_parity (line 777) | void action_serial_select_parity() {
function action_ntp_toggle (line 781) | void action_ntp_toggle() {
function action_ntp_edit_server (line 785) | void action_ntp_edit_server() {
FILE: eez_psu_sketch/actions.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/adc.cpp
type eez (line 23) | namespace eez {
type psu (line 24) | namespace psu {
function adc_interrupt_ch1 (line 34) | static void adc_interrupt_ch1() {
function adc_interrupt_ch2 (line 38) | static void adc_interrupt_ch2() {
FILE: eez_psu_sketch/adc.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/arduino_util.cpp
type eez (line 22) | namespace eez {
type psu (line 23) | namespace psu {
type arduino_util (line 24) | namespace arduino_util {
function prog_read_byte (line 26) | uint8_t prog_read_byte(const uint8_t *p PROGMEM) {
function prog_read_word (line 30) | uint16_t prog_read_word(const uint8_t *p PROGMEM) {
function prog_read_buffer (line 34) | void prog_read_buffer(const uint8_t *src PROGMEM, uint8_t *dest, i...
FILE: eez_psu_sketch/arduino_util.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/board.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type board (line 27) | namespace board {
function powerUp (line 29) | void powerUp() {
function powerDown (line 40) | void powerDown() {
function cvLedSwitch (line 51) | void cvLedSwitch(Channel *channel, bool on) {
function ccLedSwitch (line 55) | void ccLedSwitch(Channel *channel, bool on) {
FILE: eez_psu_sketch/board.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/bp.cpp
type eez (line 22) | namespace eez {
type psu (line 23) | namespace psu {
type bp (line 24) | namespace bp {
function set (line 33) | void set(uint16_t conf) {
function bp_switch (line 50) | void bp_switch(uint16_t mask, bool on) {
function bp_switch2 (line 72) | void bp_switch2(uint16_t maskOn, uint16_t maskOff) {
function init (line 85) | void init() {
function flashAll (line 90) | void flashAll() {
function isStandbyOn (line 127) | bool isStandbyOn() {
function switchStandby (line 131) | void switchStandby(bool on) {
function switchOutput (line 135) | void switchOutput(Channel *channel, bool on) {
function switchSense (line 153) | void switchSense(Channel *channel, bool on) {
function switchProg (line 163) | void switchProg(Channel *channel, bool on) {
function cvLedSwitch (line 171) | void cvLedSwitch(Channel *channel, bool on) {
function ccLedSwitch (line 175) | void ccLedSwitch(Channel *channel, bool on) {
function switchChannelCoupling (line 181) | void switchChannelCoupling(int channelCouplingType) {
FILE: eez_psu_sketch/bp.h
function namespace (line 76) | namespace eez {
FILE: eez_psu_sketch/buzzer.cpp
function tone (line 53) | void tone(uint32_t ulPin, uint32_t frequency, int32_t duration)
function noTone (line 83) | void noTone(uint32_t ulPin)
function TC3_Handler (line 90) | void TC3_Handler(void) {
type eez (line 103) | namespace eez {
type psu (line 104) | namespace psu {
type buzzer (line 105) | namespace buzzer {
function tone (line 107) | void tone(uint32_t frequency, int32_t duration) {
FILE: eez_psu_sketch/buzzer.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/calibration.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type calibration (line 27) | namespace calibration {
function resetChannelToZero (line 193) | void resetChannelToZero() {
function isEnabled (line 198) | bool isEnabled() {
function Channel (line 202) | Channel &getCalibrationChannel() {
function start (line 206) | void start(Channel *channel_) {
function stop (line 228) | void stop() {
function hasSupportForCurrentDualRange (line 241) | bool hasSupportForCurrentDualRange() {
function selectCurrentRange (line 245) | void selectCurrentRange(int8_t range) {
function Value (line 250) | Value& getVoltage() {
function Value (line 254) | Value& getCurrent() {
function isRemarkSet (line 258) | bool isRemarkSet() {
function setRemark (line 266) | void setRemark(const char *value, size_t len) {
function checkCalibrationValue (line 272) | static bool checkCalibrationValue(calibration::Value &calibrationV...
function isVoltageCalibrated (line 286) | bool isVoltageCalibrated() {
function isCurrentCalibrated (line 290) | bool isCurrentCalibrated(Value ¤t) {
function canSave (line 294) | bool canSave(int16_t &scpiErr) {
function save (line 339) | bool save() {
function clear (line 423) | bool clear(Channel *channel) {
FILE: eez_psu_sketch/calibration.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/channel.cpp
type eez (line 45) | namespace eez {
type psu (line 46) | namespace psu {
function Channel (line 86) | Channel &Channel::get(int channel_index) {
function MaxCurrentLimitCause (line 1720) | MaxCurrentLimitCause Channel::getMaxCurrentLimitCause() const {
function TriggerMode (line 1776) | TriggerMode Channel::getVoltageTriggerMode() {
function TriggerMode (line 1784) | TriggerMode Channel::getCurrentTriggerMode() {
function TriggerOnListStop (line 1800) | TriggerOnListStop Channel::getTriggerOnListStop() {
FILE: eez_psu_sketch/channel.h
function namespace (line 31) | namespace eez {
FILE: eez_psu_sketch/channel_dispatcher.cpp
type eez (line 28) | namespace eez {
type psu (line 29) | namespace psu {
type channel_dispatcher (line 30) | namespace channel_dispatcher {
function isCouplingOrTrackingAllowed (line 34) | bool isCouplingOrTrackingAllowed() {
function setType (line 46) | bool setType(Type value) {
function Type (line 173) | Type getType() {
function getUSet (line 177) | float getUSet(const Channel &channel) {
function getUSetUnbalanced (line 184) | float getUSetUnbalanced(const Channel &channel) {
function getUMon (line 191) | float getUMon(const Channel &channel) {
function getUMonLast (line 198) | float getUMonLast(const Channel &channel) {
function getUMonHistory (line 205) | float getUMonHistory(const Channel &channel, int position) {
function getUMonDac (line 212) | float getUMonDac(const Channel &channel) {
function getULimit (line 219) | float getULimit(const Channel &channel) {
function getUMaxLimit (line 226) | float getUMaxLimit(const Channel &channel) {
function getUMin (line 235) | float getUMin(const Channel &channel) {
function getUDef (line 244) | float getUDef(const Channel &channel) {
function getUMax (line 251) | float getUMax(const Channel &channel) {
function getUProtectionLevel (line 260) | float getUProtectionLevel(const Channel &channel) {
function setVoltage (line 267) | void setVoltage(Channel &channel, float voltage) {
function setVoltageLimit (line 279) | void setVoltageLimit(Channel &channel, float limit) {
function setOvpParameters (line 291) | void setOvpParameters(Channel &channel, int state, float level, fl...
function setOvpState (line 309) | void setOvpState(Channel &channel, int state) {
function setOvpLevel (line 318) | void setOvpLevel(Channel &channel, float level) {
function setOvpDelay (line 328) | void setOvpDelay(Channel &channel, float delay) {
function getISet (line 337) | float getISet(const Channel &channel) {
function getISetUnbalanced (line 344) | float getISetUnbalanced(const Channel &channel) {
function getIMon (line 351) | float getIMon(const Channel &channel) {
function getIMonLast (line 358) | float getIMonLast(const Channel &channel) {
function getIMonHistory (line 365) | float getIMonHistory(const Channel &channel, int position) {
function getIMonDac (line 372) | float getIMonDac(const Channel &channel) {
function getILimit (line 379) | float getILimit(const Channel &channel) {
function getIMaxLimit (line 386) | float getIMaxLimit(const Channel &channel) {
function getIMin (line 395) | float getIMin(const Channel &channel) {
function getIDef (line 404) | float getIDef(const Channel &channel) {
function getIMax (line 411) | float getIMax(const Channel &channel) {
function setCurrent (line 420) | void setCurrent(Channel &channel, float current) {
function setCurrentLimit (line 432) | void setCurrentLimit(Channel &channel, float limit) {
function setOcpParameters (line 444) | void setOcpParameters(Channel &channel, int state, float delay) {
function setOcpState (line 457) | void setOcpState(Channel &channel, int state) {
function setOcpDelay (line 466) | void setOcpDelay(Channel &channel, float delay) {
function getPowerLimit (line 475) | float getPowerLimit(const Channel& channel) {
function getPowerMinLimit (line 482) | float getPowerMinLimit(const Channel& channel) {
function getPowerMaxLimit (line 486) | float getPowerMaxLimit(const Channel& channel) {
function getPowerDefaultLimit (line 493) | float getPowerDefaultLimit(const Channel& channel) {
function getPowerProtectionLevel (line 497) | float getPowerProtectionLevel(const Channel &channel) {
function setPowerLimit (line 504) | void setPowerLimit(Channel &channel, float limit) {
function getOppMinLevel (line 516) | float getOppMinLevel(Channel &channel) {
function getOppMaxLevel (line 523) | float getOppMaxLevel(Channel &channel) {
function getOppDefaultLevel (line 530) | float getOppDefaultLevel(Channel &channel) {
function setOppParameters (line 537) | void setOppParameters(Channel &channel, int state, float level, fl...
function setOppState (line 553) | void setOppState(Channel &channel, int state) {
function setOppLevel (line 562) | void setOppLevel(Channel &channel, float level) {
function setOppDelay (line 574) | void setOppDelay(Channel &channel, float delay) {
function outputEnable (line 583) | void outputEnable(Channel& channel, bool enable) {
function remoteSensingEnable (line 592) | void remoteSensingEnable(Channel& channel, bool enable) {
function remoteProgrammingEnable (line 601) | void remoteProgrammingEnable(Channel& channel, bool enable) {
function lowRippleEnable (line 610) | bool lowRippleEnable(Channel& channel, bool enable) {
function lowRippleAutoEnable (line 623) | void lowRippleAutoEnable(Channel& channel, bool enable) {
function isTripped (line 632) | bool isTripped(Channel& channel) {
function clearProtection (line 640) | void clearProtection(Channel& channel) {
function disableProtection (line 649) | void disableProtection(Channel& channel) {
function isOvpTripped (line 658) | bool isOvpTripped(Channel& channel) {
function isOcpTripped (line 666) | bool isOcpTripped(Channel& channel) {
function isOppTripped (line 674) | bool isOppTripped(Channel& channel) {
function isOtpTripped (line 682) | bool isOtpTripped(Channel& channel) {
function clearOtpProtection (line 690) | void clearOtpProtection(int sensor) {
function setOtpParameters (line 699) | void setOtpParameters(Channel &channel, int state, float level, fl...
function setOtpState (line 716) | void setOtpState(int sensor, int state) {
function setOtpLevel (line 725) | void setOtpLevel(int sensor, float level) {
function setOtpDelay (line 734) | void setOtpDelay(int sensor, float delay) {
function setDisplayViewSettings (line 743) | void setDisplayViewSettings(Channel &channel, int displayValue1, i...
function TriggerMode (line 759) | TriggerMode getVoltageTriggerMode(Channel& channel) {
function setVoltageTriggerMode (line 767) | void setVoltageTriggerMode(Channel& channel, TriggerMode mode) {
function TriggerMode (line 775) | TriggerMode getCurrentTriggerMode(Channel& channel) {
function setCurrentTriggerMode (line 783) | void setCurrentTriggerMode(Channel& channel, TriggerMode mode) {
function getTriggerOutputState (line 791) | bool getTriggerOutputState(Channel& channel) {
function setTriggerOutputState (line 799) | void setTriggerOutputState(Channel& channel, bool enable) {
function TriggerOnListStop (line 807) | TriggerOnListStop getTriggerOnListStop(Channel& channel) {
function setTriggerOnListStop (line 815) | void setTriggerOnListStop(Channel& channel, TriggerOnListStop valu...
function getTriggerVoltage (line 823) | float getTriggerVoltage(Channel& channel) {
function setTriggerVoltage (line 831) | void setTriggerVoltage(Channel& channel, float value) {
function getTriggerCurrent (line 839) | float getTriggerCurrent(Channel& channel) {
function setTriggerCurrent (line 847) | void setTriggerCurrent(Channel& channel, float value) {
function setLoadEnabled (line 856) | void setLoadEnabled(Channel &channel, bool state) {
function setLoad (line 865) | void setLoad(Channel &channel, float load) {
function isCurrentLowRangeAllowed (line 875) | bool isCurrentLowRangeAllowed(Channel &channel) {
FILE: eez_psu_sketch/channel_dispatcher.h
function namespace (line 27) | namespace eez {
FILE: eez_psu_sketch/dac.cpp
type eez (line 22) | namespace eez {
type psu (line 23) | namespace psu {
FILE: eez_psu_sketch/dac.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/datetime.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type datetime (line 27) | namespace datetime {
type Week (line 47) | enum Week {Last, First, Second, Third, Fourth}
type DayOfWeek (line 48) | enum DayOfWeek {Sun=1, Mon, Tue, Wed, Thu, Fri, Sat}
type Month (line 49) | enum Month {Jan=1, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, No...
type TimeChangeRule (line 51) | struct TimeChangeRule {
function init (line 69) | void init() {
function cmp_datetime (line 72) | int cmp_datetime(uint8_t year, uint8_t month, uint8_t day, uint8_t...
function isValidDate (line 96) | bool isValidDate(uint8_t year, uint8_t month, uint8_t day) {
function isValidTime (line 117) | bool isValidTime(uint8_t hour, uint8_t minute, uint8_t second) {
function dstCheck (line 124) | bool dstCheck() {
function test (line 152) | bool test() {
function tick (line 193) | void tick(uint32_t tickCount) {
function getDate (line 202) | bool getDate(uint8_t &year, uint8_t &month, uint8_t &day) {
function checkDateTime (line 206) | bool checkDateTime() {
function setDate (line 216) | bool setDate(uint8_t year, uint8_t month, uint8_t day, unsigned ds...
function getTime (line 226) | bool getTime(uint8_t &hour, uint8_t &minute, uint8_t &second) {
function setTime (line 230) | bool setTime(uint8_t hour, uint8_t minute, uint8_t second, unsigne...
function getDateTime (line 240) | bool getDateTime(uint8_t &year, uint8_t &month, uint8_t &day, uint...
function setDateTime (line 244) | bool setDateTime(uint8_t year, uint8_t month, uint8_t day, uint8_t...
function getDateTimeAsString (line 256) | bool getDateTimeAsString(char *buffer) {
function now (line 267) | uint32_t now() {
function nowUtc (line 273) | uint32_t nowUtc() {
function makeTime (line 280) | uint32_t makeTime(int year, int month, int day, int hour, int minu...
function breakTime (line 308) | void breakTime(uint32_t time, int &resultYear, int &resultMonth, i...
function dayOfWeek (line 358) | uint8_t dayOfWeek(int y, int m, int d) {
function timeChangeRuleToLocal (line 366) | uint32_t timeChangeRuleToLocal(TimeChangeRule &r, int year) {
function isDst (line 389) | bool isDst(uint32_t local, DstRule dstRule) {
function utcToLocal (line 405) | uint32_t utcToLocal(uint32_t utc, int16_t timeZone, DstRule dstRul...
function localToUtc (line 413) | uint32_t localToUtc(uint32_t local, int16_t timeZone, DstRule dstR...
function DateTime (line 435) | DateTime DateTime::now() {
FILE: eez_psu_sketch/datetime.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/debug.cpp
type eez (line 42) | namespace eez {
type psu (line 43) | namespace psu {
type debug (line 44) | namespace debug {
function dumpVariables (line 88) | void dumpVariables(char *buffer) {
function DumpTraceBuffer (line 132) | void DumpTraceBuffer() {
function tick (line 166) | void tick(uint32_t tickCount) {
function Trace (line 199) | void Trace(const char *format, ...) {
type debug (line 127) | namespace debug {
function dumpVariables (line 88) | void dumpVariables(char *buffer) {
function DumpTraceBuffer (line 132) | void DumpTraceBuffer() {
function tick (line 166) | void tick(uint32_t tickCount) {
function Trace (line 199) | void Trace(const char *format, ...) {
type psu (line 126) | namespace psu {
type debug (line 44) | namespace debug {
function dumpVariables (line 88) | void dumpVariables(char *buffer) {
function DumpTraceBuffer (line 132) | void DumpTraceBuffer() {
function tick (line 166) | void tick(uint32_t tickCount) {
function Trace (line 199) | void Trace(const char *format, ...) {
type debug (line 127) | namespace debug {
function dumpVariables (line 88) | void dumpVariables(char *buffer) {
function DumpTraceBuffer (line 132) | void DumpTraceBuffer() {
function tick (line 166) | void tick(uint32_t tickCount) {
function Trace (line 199) | void Trace(const char *format, ...) {
type eez (line 125) | namespace eez {
type psu (line 43) | namespace psu {
type debug (line 44) | namespace debug {
function dumpVariables (line 88) | void dumpVariables(char *buffer) {
function DumpTraceBuffer (line 132) | void DumpTraceBuffer() {
function tick (line 166) | void tick(uint32_t tickCount) {
function Trace (line 199) | void Trace(const char *format, ...) {
type debug (line 127) | namespace debug {
function dumpVariables (line 88) | void dumpVariables(char *buffer) {
function DumpTraceBuffer (line 132) | void DumpTraceBuffer() {
function tick (line 166) | void tick(uint32_t tickCount) {
function Trace (line 199) | void Trace(const char *format, ...) {
type psu (line 126) | namespace psu {
type debug (line 44) | namespace debug {
function dumpVariables (line 88) | void dumpVariables(char *buffer) {
function DumpTraceBuffer (line 132) | void DumpTraceBuffer() {
function tick (line 166) | void tick(uint32_t tickCount) {
function Trace (line 199) | void Trace(const char *format, ...) {
type debug (line 127) | namespace debug {
function dumpVariables (line 88) | void dumpVariables(char *buffer) {
function DumpTraceBuffer (line 132) | void DumpTraceBuffer() {
function tick (line 166) | void tick(uint32_t tickCount) {
function Trace (line 199) | void Trace(const char *format, ...) {
FILE: eez_psu_sketch/debug.h
function namespace (line 27) | namespace eez {
function namespace (line 54) | namespace eez {
FILE: eez_psu_sketch/devices.cpp
type eez (line 40) | namespace eez {
type psu (line 41) | namespace psu {
type devices (line 42) | namespace devices {
function anyFailed (line 78) | bool anyFailed() {
FILE: eez_psu_sketch/devices.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/dlog.cpp
type eez (line 32) | namespace eez {
type psu (line 33) | namespace psu {
type dlog (line 34) | namespace dlog {
type State (line 44) | enum State {
function setState (line 61) | void setState(State newState) {
function checkDlogParameters (line 73) | int checkDlogParameters() {
function isIdle (line 93) | bool isIdle() {
function isInitiated (line 97) | bool isInitiated() {
function initiate (line 101) | int initiate(const char *filePath) {
function triggerGenerated (line 122) | void triggerGenerated(bool startImmediatelly) {
function writeUint8 (line 137) | void writeUint8(uint8_t value) {
function writeUint16 (line 141) | void writeUint16(uint16_t value) {
function writeUint32 (line 146) | void writeUint32(uint32_t value) {
function writeFloat (line 153) | void writeFloat(float value) {
function startImmediately (line 157) | int startImmediately() {
function finishLogging (line 216) | void finishLogging() {
function abort (line 226) | void abort() {
function log (line 234) | void log(uint32_t tickCount) {
function tick (line 325) | void tick(uint32_t tickCount) {
function reset (line 336) | void reset() {
FILE: eez_psu_sketch/dlog.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/eeprom.cpp
type eez (line 22) | namespace eez {
type psu (line 23) | namespace psu {
type eeprom (line 24) | namespace eeprom {
function send_address (line 30) | void send_address(uint16_t address) {
function read_chunk (line 35) | void read_chunk(uint8_t *buffer, uint16_t buffer_size, uint16_t ad...
function read (line 51) | void read(uint8_t *buffer, uint16_t buffer_size, uint16_t address) {
function is_write_in_progress (line 69) | bool is_write_in_progress() {
function write_chunk (line 79) | void write_chunk(const uint8_t *buffer, uint16_t buffer_size, uint...
function write (line 120) | bool write(const uint8_t *buffer, uint16_t buffer_size, uint16_t a...
function init (line 144) | void init() {
function test (line 156) | bool test() {
FILE: eez_psu_sketch/eeprom.h
function namespace (line 243) | namespace eez {
FILE: eez_psu_sketch/encoder.cpp
type eez (line 31) | namespace eez {
type psu (line 32) | namespace psu {
type encoder (line 33) | namespace encoder {
function updateMaxDiff (line 75) | void updateMaxDiff() {
function abInterruptHandler (line 79) | void abInterruptHandler() {
function swInterruptHandler (line 110) | void swInterruptHandler() {
function init (line 124) | void init() {
function read (line 140) | void read(uint32_t tickCount, int &counter, bool &clicked) {
function enableAcceleration (line 156) | void enableAcceleration(bool enable) {
function setMovingSpeed (line 163) | void setMovingSpeed(uint8_t down, uint8_t up) {
function write (line 171) | void write(int counter, bool clicked) {
FILE: eez_psu_sketch/encoder.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/ethernet.cpp
type eez (line 42) | namespace eez {
type psu (line 43) | namespace psu {
type ethernet (line 47) | namespace ethernet {
function ethernet_client_write (line 59) | size_t ethernet_client_write(EthernetClient &client, const char *d...
function ethernet_client_write_str (line 67) | size_t ethernet_client_write_str(EthernetClient &client, const cha...
function SCPI_Write (line 73) | size_t SCPI_Write(scpi_t *context, const char * data, size_t len) {
function scpi_result_t (line 77) | scpi_result_t SCPI_Flush(scpi_t * context) {
function SCPI_Error (line 81) | int SCPI_Error(scpi_t *context, int_fast16_t err) {
function scpi_result_t (line 95) | scpi_result_t SCPI_Control(scpi_t *context, scpi_ctrl_name_t ctrl,...
function scpi_result_t (line 108) | scpi_result_t SCPI_Reset(scpi_t *context) {
function init (line 136) | void init() {
function test (line 216) | bool test() {
function tick (line 224) | void tick(uint32_t tick_usec) {
function getIpAddress (line 288) | uint32_t getIpAddress() {
function isConnected (line 292) | bool isConnected() {
function update (line 296) | void update() {
FILE: eez_psu_sketch/ethernet.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/event_queue.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type event_queue (line 27) | namespace event_queue {
function readHeader (line 49) | void readHeader() {
function writeHeader (line 53) | void writeHeader() {
function readEvent (line 59) | void readEvent(uint16_t eventIndex, Event *e) {
function writeEvent (line 63) | void writeEvent(uint16_t eventIndex, Event *e) {
function init (line 69) | void init() {
function doPushEvent (line 84) | void doPushEvent(int16_t eventId) {
function tick (line 116) | void tick(uint32_t tick_usec) {
function getNumEvents (line 123) | int getNumEvents() {
function getEvent (line 127) | void getEvent(uint16_t index, Event *e) {
function getLastErrorEvent (line 132) | void getLastErrorEvent(Event *e) {
function getEventType (line 145) | int getEventType(Event *e) {
function pushEvent (line 213) | void pushEvent(int16_t eventId) {
function markAsRead (line 222) | void markAsRead() {
function getNumPages (line 230) | int getNumPages() {
function getActivePageNumEvents (line 234) | int getActivePageNumEvents() {
function getActivePageEvent (line 242) | void getActivePageEvent(int i, Event *e) {
function moveToFirstPage (line 246) | void moveToFirstPage() {
function moveToNextPage (line 250) | void moveToNextPage() {
function moveToPreviousPage (line 256) | void moveToPreviousPage() {
function getActivePageIndex (line 262) | int getActivePageIndex() {
FILE: eez_psu_sketch/event_queue.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/fan.cpp
type eez (line 28) | namespace eez {
type psu (line 29) | namespace psu {
type fan (line 30) | namespace fan {
type RpmMeasureState (line 34) | enum RpmMeasureState {
function dt_to_rpm (line 74) | int dt_to_rpm(uint32_t dt) {
function pwm_to_rpm (line 80) | int pwm_to_rpm(int pwm) {
function start_rpm_measure (line 89) | void start_rpm_measure() {
function rpm_measure_interrupt_handler (line 101) | void rpm_measure_interrupt_handler() {
function finish_rpm_measure (line 127) | void finish_rpm_measure() {
function init (line 137) | void init() {
function test_start (line 147) | void test_start() {
function test (line 154) | bool test() {
function tick (line 202) | void tick(uint32_t tick_usec) {
function setPidTunings (line 277) | void setPidTunings(double Kp, double Ki, double Kd, int POn) {
FILE: eez_psu_sketch/fan.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/font.cpp
type eez (line 26) | namespace eez {
type psu (line 27) | namespace psu {
type gui (line 28) | namespace gui {
type font (line 29) | namespace font {
FILE: eez_psu_sketch/font.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/gesture.cpp
type eez (line 33) | namespace eez {
type psu (line 34) | namespace psu {
type gui (line 35) | namespace gui {
type gesture (line 36) | namespace gesture {
function recognize (line 51) | void recognize() {
function tick (line 84) | void tick(uint32_t tick_usec) {
FILE: eez_psu_sketch/gesture.h
function namespace (line 3) | namespace eez {
FILE: eez_psu_sketch/gui.cpp
type eez (line 78) | namespace eez {
type psu (line 79) | namespace psu {
type gui (line 80) | namespace gui {
type Event (line 99) | struct Event {
type EventType (line 142) | enum EventType {
function Page (line 160) | Page *createPageFromId(int pageId) {
function isActivePageInternal (line 209) | bool isActivePageInternal() {
function executeAction (line 215) | void executeAction(int actionId) {
function getActivePageId (line 222) | int getActivePageId() {
function isActivePage (line 226) | bool isActivePage(int pageId) {
function Page (line 230) | Page *getActivePage() {
function getPreviousActivePageId (line 234) | int getPreviousActivePageId() {
function Page (line 238) | Page *getPreviousPage() {
function doShowPage (line 246) | void doShowPage(int index, Page *page = 0) {
function setPage (line 278) | void setPage(int pageId) {
function replacePage (line 294) | void replacePage(int pageId, Page *page) {
function pushPage (line 298) | void pushPage(int pageId, Page *page) {
function popPage (line 327) | void popPage() {
function isPageActiveOrOnStack (line 338) | bool isPageActiveOrOnStack(int pageId) {
function showWelcomePage (line 351) | void showWelcomePage() {
function showSelfTestResultPage (line 356) | void showSelfTestResultPage() {
function showStandbyPage (line 361) | void showStandbyPage() {
function showEnteringStandbyPage (line 366) | void showEnteringStandbyPage() {
function showEthernetInit (line 373) | void showEthernetInit() {
function pushSelectFromEnumPage (line 381) | void pushSelectFromEnumPage(const data::EnumItem *enumDefinition, ...
function dialogYes (line 385) | void dialogYes() {
function dialogNo (line 393) | void dialogNo() {
function dialogCancel (line 401) | void dialogCancel() {
function dialogOk (line 409) | void dialogOk() {
function dialogLater (line 413) | void dialogLater() {
function errorMessageAction (line 421) | void errorMessageAction() {
function alertMessage (line 431) | void alertMessage(int alertPageId, data::Value message, void (*ok_...
function longAlertMessage (line 443) | void longAlertMessage(int alertPageId, data::Value message, data::...
function infoMessage (line 448) | void infoMessage(data::Value value, void (*ok_callback)()) {
function infoMessageP (line 452) | void infoMessageP(const char *message PROGMEM, void (*ok_callback)...
function longInfoMessage (line 456) | void longInfoMessage(data::Value value1, data::Value value2, void ...
function longInfoMessageP (line 460) | void longInfoMessageP(const char *message1 PROGMEM, const char *me...
function longErrorMessage (line 464) | void longErrorMessage(data::Value value1, data::Value value2, void...
function longErrorMessageP (line 468) | void longErrorMessageP(const char *message1 PROGMEM, const char *m...
function toastMessageP (line 472) | void toastMessageP(const char *message1 PROGMEM, const char *messa...
function setTextMessage (line 477) | void setTextMessage(const char *message, unsigned int len) {
function clearTextMessage (line 486) | void clearTextMessage() {
function getTextMessageVersion (line 496) | uint8_t getTextMessageVersion() {
function changeLimit (line 500) | void changeLimit(Channel& channel, const data::Value& value, floa...
function onSetVoltageLimit (line 519) | void onSetVoltageLimit(float limit) {
function changeVoltageLimit (line 525) | void changeVoltageLimit() {
function onSetCurrentLimit (line 533) | void onSetCurrentLimit(float limit) {
function changeCurrentLimit (line 539) | void changeCurrentLimit() {
function onSetPowerLimit (line 547) | void onSetPowerLimit(float limit) {
function changePowerLimit (line 553) | void changePowerLimit() {
function errorMessage (line 561) | void errorMessage(const data::Cursor& cursor, data::Value value, v...
function errorMessageP (line 607) | void errorMessageP(const char *message PROGMEM, void (*ok_callback...
function yesNoDialog (line 612) | void yesNoDialog(int yesNoPageId, const char *message PROGMEM, voi...
function areYouSure (line 622) | void areYouSure(void (*yes_callback)()) {
function areYouSureWithMessage (line 626) | void areYouSureWithMessage(const char *message PROGMEM, void (*yes...
function showAsyncOperationInProgress (line 630) | void showAsyncOperationInProgress(const char *message, void (*chec...
function hideAsyncOperationInProgress (line 636) | void hideAsyncOperationInProgress() {
function showProgressPage (line 640) | void showProgressPage(const char *message, void (*abortCallback)()) {
function updateProgressPage (line 646) | bool updateProgressPage(size_t processedSoFar, size_t totalSize) {
function hideProgressPage (line 659) | void hideProgressPage() {
function yesNoLater (line 665) | void yesNoLater(const char *message PROGMEM, void (*yes_callback)(...
function isChannelTripLastEvent (line 676) | static bool isChannelTripLastEvent(int i, event_queue::Event &last...
function onLastErrorEventAction (line 688) | void onLastErrorEventAction() {
function doUnlockFrontPanel (line 705) | static void doUnlockFrontPanel() {
function checkPasswordToUnlockFrontPanel (line 713) | static void checkPasswordToUnlockFrontPanel() {
function lockFrontPanel (line 717) | void lockFrontPanel() {
function unlockFrontPanel (line 723) | void unlockFrontPanel() {
function isWidgetActionEnabled (line 733) | bool isWidgetActionEnabled(const WidgetCursor &widgetCursor) {
function transformStyle (line 760) | int transformStyle(const Widget *widget) {
function isChannelCalibrationsDone (line 782) | bool isChannelCalibrationsDone() {
function isDateTimeSetupDone (line 791) | bool isDateTimeSetupDone() {
function channelCalibrationsYes (line 795) | void channelCalibrationsYes() {
function channelCalibrationsNo (line 799) | void channelCalibrationsNo() {
function dateTimeYes (line 804) | void dateTimeYes() {
function dateTimeNo (line 808) | void dateTimeNo() {
function serialYes (line 813) | void serialYes() {
function serialNo (line 817) | void serialNo() {
function ethernetYes (line 822) | void ethernetYes() {
function ethernetNo (line 826) | void ethernetNo() {
function showSetupWizardQuestion (line 831) | bool showSetupWizardQuestion() {
function selectChannel (line 871) | void selectChannel() {
function setFocusCursor (line 881) | void setFocusCursor(const data::Cursor& cursor, uint8_t dataId) {
function wasFocusWidget (line 887) | bool wasFocusWidget(const WidgetCursor &widgetCursor) {
function isFocusWidget (line 892) | bool isFocusWidget(const WidgetCursor &widgetCursor) {
function isFocusChanged (line 907) | bool isFocusChanged() {
function isEnabledFocusCursor (line 911) | bool isEnabledFocusCursor(data::Cursor& cursor, uint8_t dataId) {
function moveToNextFocusCursor (line 919) | void moveToNextFocusCursor() {
function ActionType (line 953) | ActionType getAction(WidgetCursor &widgetCursor) {
function isAutoRepeatAction (line 962) | bool isAutoRepeatAction(ActionType action) {
function isEncoderEnabledInActivePageCheckWidget (line 977) | void isEncoderEnabledInActivePageCheckWidget(int pageId, const Wid...
function isEncoderEnabledInActivePage (line 984) | bool isEncoderEnabledInActivePage() {
function onEncoder (line 991) | void onEncoder(uint32_t tickCount, int counter, bool clicked) {
function channelReinitiateTrigger (line 1100) | void channelReinitiateTrigger() {
function channelToggleOutput (line 1105) | void channelToggleOutput() {
function channelInitiateTrigger (line 1145) | void channelInitiateTrigger() {
function channelSetToFixed (line 1156) | void channelSetToFixed() {
function channelEnableOutput (line 1168) | void channelEnableOutput() {
function standBy (line 1174) | void standBy() {
function turnDisplayOff (line 1178) | void turnDisplayOff() {
function reset (line 1182) | void reset() {
function init (line 1189) | void init() {
function getStartPageId (line 1223) | int getStartPageId() {
function pushEvent (line 1233) | void pushEvent(EventType type) {
function touchHandling (line 1284) | void touchHandling(uint32_t tick_usec) {
function processEvents (line 1327) | void processEvents() {
function tick (line 1451) | void tick(uint32_t tick_usec) {
FILE: eez_psu_sketch/gui.h
function namespace (line 25) | namespace eez {
FILE: eez_psu_sketch/gui_calibration.cpp
type eez (line 34) | namespace eez {
type psu (line 35) | namespace psu {
type gui (line 36) | namespace gui {
type calibration (line 37) | namespace calibration {
function onStartPasswordOk (line 48) | void onStartPasswordOk() {
function start (line 74) | void start() {
function getLevelValue (line 78) | data::Value getLevelValue() {
function getData (line 85) | data::Value getData(const data::Cursor &cursor, uint8_t id) {
function showCurrentStep (line 164) | void showCurrentStep() {
function onSetLevelOk (line 194) | void onSetLevelOk(float value) {
function setLevelValue (line 200) | void setLevelValue() {
function onSetOk (line 229) | void onSetOk(float value) {
function onSetRemarkOk (line 244) | void onSetRemarkOk(char *remark) {
function set (line 259) | void set() {
function previousStep (line 307) | void previousStep() {
function nextStep (line 322) | void nextStep() {
function save (line 343) | void save() {
function finishStop (line 352) | void finishStop() {
function stop (line 364) | void stop(void (*callback)()) {
function toggleEnable (line 369) | void toggleEnable() {
FILE: eez_psu_sketch/gui_calibration.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_data.cpp
type eez (line 53) | namespace eez {
type psu (line 54) | namespace psu {
type gui (line 55) | namespace gui {
type data (line 56) | namespace data {
type ChannelSnapshot (line 63) | struct ChannelSnapshot {
function Value (line 193) | Value Value::ProgmemStr(const char *pstr PROGMEM) {
function Value (line 200) | Value Value::PageInfo(uint8_t pageIndex, uint8_t numPages) {
function Value (line 208) | Value Value::ScpiErrorText(int16_t errorCode) {
function Value (line 215) | Value Value::LessThenMinMessage(float float_, ValueType type) {
function Value (line 229) | Value Value::GreaterThenMaxMessage(float float_, ValueType type) {
function printTime (line 319) | void printTime(uint32_t time, char *text, int count) {
function isDisplayValue (line 661) | static bool isDisplayValue(const Cursor &cursor, uint8_t id, Dis...
function isUMonData (line 667) | static bool isUMonData(const Cursor &cursor, uint8_t id) {
function isIMonData (line 671) | static bool isIMonData(const Cursor &cursor, uint8_t id) {
function isPMonData (line 675) | static bool isPMonData(const Cursor &cursor, uint8_t id) {
function count (line 679) | int count(uint8_t id) {
function select (line 700) | void select(Cursor &cursor, uint8_t id, int index) {
function getListLength (line 710) | int getListLength(uint8_t id) {
function Value (line 728) | Value getMin(const Cursor &cursor, uint8_t id) {
function Value (line 752) | Value getMax(const Cursor &cursor, uint8_t id) {
function Value (line 776) | Value getDef(const Cursor &cursor, uint8_t id) {
function Value (line 788) | Value getLimit(const Cursor &cursor, uint8_t id) {
function ValueType (line 802) | ValueType getUnit(const Cursor &cursor, uint8_t id) {
function getList (line 811) | void getList(const Cursor &cursor, uint8_t id, const Value **val...
function Value (line 852) | Value get(const Cursor &cursor, uint8_t id) {
function set (line 1297) | bool set(const Cursor &cursor, uint8_t id, Value value, int16_t ...
function getNumHistoryValues (line 1361) | int getNumHistoryValues(uint8_t id) {
function getCurrentHistoryValuePosition (line 1365) | int getCurrentHistoryValuePosition(const Cursor &cursor, uint8_t...
function Value (line 1370) | Value getHistoryValue(const Cursor &cursor, uint8_t id, int posi...
function isBlinking (line 1386) | bool isBlinking(const Cursor &cursor, uint8_t id) {
function Value (line 1408) | Value getEditValue(const Cursor &cursor, uint8_t id) {
function getWidgetBackgroundColor (line 1424) | uint16_t getWidgetBackgroundColor(const WidgetCursor& widgetCurs...
FILE: eez_psu_sketch/gui_data.h
function namespace (line 24) | namespace eez {
FILE: eez_psu_sketch/gui_document.cpp
type eez (line 26) | namespace eez {
type psu (line 27) | namespace psu {
type gui (line 28) | namespace gui {
FILE: eez_psu_sketch/gui_document.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/gui_edit_mode.cpp
type eez (line 33) | namespace eez {
type psu (line 34) | namespace psu {
type gui (line 35) | namespace gui {
type edit_mode (line 36) | namespace edit_mode {
function isActive (line 48) | bool isActive() {
function initEditValue (line 54) | void initEditValue() {
function enter (line 59) | void enter(int tabIndex) {
function update (line 96) | void update() {
function exit (line 102) | void exit() {
function nonInteractiveSet (line 107) | void nonInteractiveSet() {
function nonInteractiveDiscard (line 114) | void nonInteractiveDiscard() {
function isInteractiveMode (line 119) | bool isInteractiveMode() {
function toggleInteractiveMode (line 123) | void toggleInteractiveMode() {
function getData (line 128) | data::Value getData(const data::Cursor &cursor, uint8_t id) {
function isBlinking (line 148) | bool isBlinking(const data::Cursor &cursor, uint8_t id, bool &re...
function getCurrentValue (line 160) | data::Value getCurrentValue() {
function ValueType (line 172) | ValueType getUnit() {
function setValue (line 176) | bool setValue(float value_) {
function getInfoText (line 189) | void getInfoText(int part, char *infoText) {
FILE: eez_psu_sketch/gui_edit_mode.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_edit_mode_keypad.cpp
type eez (line 30) | namespace eez {
type psu (line 31) | namespace psu {
type gui (line 32) | namespace gui {
type edit_mode_keypad (line 33) | namespace edit_mode_keypad {
function onKeypadOk (line 39) | bool onKeypadOk(float value) {
function enter (line 43) | void enter(Channel &channel, const data::Value& editValue, const...
function exit (line 64) | void exit() {
FILE: eez_psu_sketch/gui_edit_mode_keypad.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_edit_mode_slider.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type gui (line 27) | namespace gui {
type edit_mode_slider (line 28) | namespace edit_mode_slider {
function touchY (line 41) | int touchY() {
function touchX (line 45) | int touchX() {
function displayXSize (line 49) | int displayXSize() {
function increment (line 53) | void increment(int counter) {
function onTouchDown (line 69) | void onTouchDown() {
function onTouchMove (line 76) | void onTouchMove() {
function onTouchUp (line 110) | void onTouchUp() {
FILE: eez_psu_sketch/gui_edit_mode_slider.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_edit_mode_step.cpp
type eez (line 34) | namespace eez {
type psu (line 35) | namespace psu {
type gui (line 36) | namespace gui {
type edit_mode_step (line 37) | namespace edit_mode_step {
function getStepValue (line 64) | float getStepValue() {
function getStepValues (line 72) | void getStepValues(const data::Value **labels, int &count) {
function getStepIndex (line 82) | int getStepIndex() {
function setStepIndex (line 98) | void setStepIndex(int value) {
function increment (line 107) | void increment(int counter, bool playClick) {
function onEncoder (line 146) | void onEncoder(int counter) {
function test (line 153) | void test() {
function onTouchDown (line 166) | void onTouchDown() {
function onTouchMove (line 175) | void onTouchMove() {
function onTouchUp (line 179) | void onTouchUp() {
FILE: eez_psu_sketch/gui_edit_mode_step.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/gui_internal.h
function namespace (line 37) | namespace eez {
FILE: eez_psu_sketch/gui_keypad.cpp
type eez (line 41) | namespace eez {
type psu (line 42) | namespace psu {
type gui (line 43) | namespace gui {
function Keypad (line 47) | Keypad *getActiveKeypad() {
FILE: eez_psu_sketch/gui_keypad.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_numeric_keypad.cpp
type eez (line 35) | namespace eez {
type psu (line 36) | namespace psu {
type gui (line 37) | namespace gui {
function NumericKeypad (line 100) | NumericKeypad *NumericKeypad::start(const char *label, const data:...
function ValueType (line 204) | ValueType NumericKeypad::getEditUnit() {
function ValueType (line 208) | ValueType NumericKeypad::getValueUnit() {
function ValueType (line 224) | ValueType NumericKeypad::getMilliUnit() {
function ValueType (line 236) | ValueType NumericKeypad::getSwitchToUnit() {
FILE: eez_psu_sketch/gui_numeric_keypad.h
function namespace (line 24) | namespace eez {
FILE: eez_psu_sketch/gui_page.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type gui (line 27) | namespace gui {
function WidgetCursor (line 167) | WidgetCursor SelectFromEnumPage::findWidget(int x, int y) {
function ActionType (line 196) | ActionType SelectFromEnumPage::getAction(const WidgetCursor &widge...
FILE: eez_psu_sketch/gui_page.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_page_ch_settings_adv.cpp
type eez (line 30) | namespace eez {
type psu (line 31) | namespace psu {
type gui (line 32) | namespace gui {
FILE: eez_psu_sketch/gui_page_ch_settings_adv.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_page_ch_settings_info.cpp
type eez (line 27) | namespace eez {
type psu (line 28) | namespace psu {
type gui (line 29) | namespace gui {
FILE: eez_psu_sketch/gui_page_ch_settings_info.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_page_ch_settings_protection.cpp
type eez (line 30) | namespace eez {
type psu (line 31) | namespace psu {
type gui (line 32) | namespace gui {
function onClearAndDisableYes (line 42) | void onClearAndDisableYes() {
FILE: eez_psu_sketch/gui_page_ch_settings_protection.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_page_ch_settings_trigger.cpp
type eez (line 37) | namespace eez {
type psu (line 38) | namespace psu {
type gui (line 39) | namespace gui {
FILE: eez_psu_sketch/gui_page_ch_settings_trigger.h
function namespace (line 25) | namespace eez {
FILE: eez_psu_sketch/gui_page_event_queue.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type gui (line 27) | namespace gui {
FILE: eez_psu_sketch/gui_page_event_queue.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_page_main.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type gui (line 27) | namespace gui {
FILE: eez_psu_sketch/gui_page_main.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_page_self_test_result.cpp
type eez (line 27) | namespace eez {
type psu (line 28) | namespace psu {
type gui (line 29) | namespace gui {
FILE: eez_psu_sketch/gui_page_self_test_result.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_page_sys_info.cpp
type eez (line 28) | namespace eez {
type psu (line 29) | namespace psu {
type gui (line 30) | namespace gui {
FILE: eez_psu_sketch/gui_page_sys_info.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/gui_page_sys_settings.cpp
type eez (line 39) | namespace eez {
type psu (line 40) | namespace psu {
type gui (line 41) | namespace gui {
FILE: eez_psu_sketch/gui_page_sys_settings.h
function namespace (line 28) | namespace eez {
FILE: eez_psu_sketch/gui_page_user_profiles.cpp
type eez (line 27) | namespace eez {
type psu (line 28) | namespace psu {
type gui (line 29) | namespace gui {
FILE: eez_psu_sketch/gui_page_user_profiles.h
function namespace (line 24) | namespace eez {
FILE: eez_psu_sketch/gui_password.cpp
type eez (line 29) | namespace eez {
type psu (line 30) | namespace psu {
type gui (line 31) | namespace gui {
function checkPasswordOkCallback (line 39) | static void checkPasswordOkCallback(char *text) {
function checkPassword (line 50) | static void checkPassword(const char *label, void (*ok)()) {
function onRetypeNewPasswordOk (line 57) | static void onRetypeNewPasswordOk(char *text) {
function onNewPasswordOk (line 83) | static void onNewPasswordOk(char *text) {
function onOldPasswordOk (line 108) | static void onOldPasswordOk() {
function editPassword (line 112) | static void editPassword(const char *oldPassword) {
function checkPassword (line 124) | void checkPassword(const char *label PROGMEM, const char *password...
function editSystemPassword (line 133) | void editSystemPassword() {
function editCalibrationPassword (line 137) | void editCalibrationPassword() {
FILE: eez_psu_sketch/gui_password.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/gui_view.cpp
type eez (line 39) | namespace eez {
type psu (line 40) | namespace psu {
type gui (line 41) | namespace gui {
function getCurrentStateBufferIndex (line 56) | int getCurrentStateBufferIndex() {
function styleHasBorder (line 62) | bool styleHasBorder(const Style *style) {
function styleIsHorzAlignLeft (line 66) | bool styleIsHorzAlignLeft(const Style *style) {
function styleIsHorzAlignRight (line 70) | bool styleIsHorzAlignRight(const Style *style) {
function styleIsVertAlignTop (line 74) | bool styleIsVertAlignTop(const Style *style) {
function styleIsVertAlignBottom (line 78) | bool styleIsVertAlignBottom(const Style *style) {
function styleGetFont (line 82) | font::Font styleGetFont(const Style *style) {
function styleIsBlink (line 86) | bool styleIsBlink(const Style *style) {
function drawText (line 93) | void drawText(int pageId, const char *text, int textLength, int x,...
function drawMultilineText (line 163) | void drawMultilineText(int pageId, const char *text, int x, int y,...
function fillRect (line 283) | void fillRect(int x, int y, int w, int h) {
function drawBitmap (line 287) | void drawBitmap(uint8_t bitmapIndex, int x, int y, int w, int h, c...
function drawRectangle (line 351) | void drawRectangle(int x, int y, int w, int h, const Style *style,...
function drawDisplayDataWidget (line 375) | void drawDisplayDataWidget(int pageId, const WidgetCursor &widgetC...
function drawTextWidget (line 408) | void drawTextWidget(int pageId, const WidgetCursor &widgetCursor) {
function drawMultilineTextWidget (line 443) | void drawMultilineTextWidget(int pageId, const WidgetCursor &widge...
function drawScale (line 475) | void drawScale(const Widget *widget, const ScaleWidget *scale_widg...
function drawScaleWidget (line 634) | void drawScaleWidget(const WidgetCursor &widgetCursor) {
function drawButtonWidget (line 730) | void drawButtonWidget(int pageId, const WidgetCursor &widgetCursor) {
function drawToggleButtonWidget (line 775) | void drawToggleButtonWidget(int pageId, const WidgetCursor &widget...
function drawRectangleWidget (line 794) | void drawRectangleWidget(const WidgetCursor &widgetCursor) {
function drawBitmapWidget (line 810) | void drawBitmapWidget(const WidgetCursor &widgetCursor) {
function calcValuePosInBarGraphWidget (line 825) | int calcValuePosInBarGraphWidget(data::Value &value, float min, fl...
function drawLineInBarGraphWidget (line 837) | void drawLineInBarGraphWidget(const BarGraphWidget *barGraphWidget...
function drawBarGraphWidget (line 852) | void drawBarGraphWidget(int pageId, const WidgetCursor &widgetCurs...
function getYValue (line 1136) | int getYValue(
function drawYTGraph (line 1149) | void drawYTGraph(
function drawYTGraphWidget (line 1210) | void drawYTGraphWidget(int pageId, const WidgetCursor &widgetCurso...
function drawUpDownWidget (line 1341) | void drawUpDownWidget(int pageId, const WidgetCursor &widgetCursor) {
function upDown (line 1379) | void upDown() {
function drawListGraphWidget (line 1410) | void drawListGraphWidget(const WidgetCursor &widgetCursor) {
function onTouchListGraph (line 1561) | void onTouchListGraph(const WidgetCursor &widgetCursor, int xTouch...
function drawWidget (line 1612) | void drawWidget(int pageId, const WidgetCursor &widgetCursor_) {
function refreshWidget (line 1664) | void refreshWidget(WidgetCursor widgetCursor) {
function selectWidget (line 1674) | void selectWidget(WidgetCursor &widgetCursor) {
function deselectWidget (line 1679) | void deselectWidget() {
function WidgetState (line 1687) | WidgetState *next(WidgetState *p) {
function enumContainer (line 1693) | void enumContainer(int pageId, List widgets, int x, int y, data::C...
function enumWidget (line 1724) | void enumWidget(int pageId, OBJ_OFFSET widgetOffset, int x, int y,...
function enumWidgets (line 1827) | void enumWidgets(int pageId, WidgetState *previousState, WidgetSta...
function clearBackground (line 1835) | void clearBackground() {
function drawActivePage (line 1859) | void drawActivePage(bool refresh) {
function drawTick (line 1876) | void drawTick() {
function refreshPage (line 1891) | void refreshPage() {
function flush (line 1899) | void flush() {
function findWidgetStep (line 1915) | void findWidgetStep(int pageId, const WidgetCursor &widgetCursor) {
function WidgetCursor (line 1937) | WidgetCursor findWidget(int x, int y) {
FILE: eez_psu_sketch/gui_view.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/gui_widget_button_group.cpp
type eez (line 26) | namespace eez {
type psu (line 27) | namespace psu {
type gui (line 28) | namespace gui {
type widgetButtonGroup (line 29) | namespace widgetButtonGroup {
function drawButtons (line 31) | void drawButtons(int pageId, const Widget* widget, int x, int y,...
function draw (line 97) | void draw(int pageId, const WidgetCursor &widgetCursor) {
function onTouchDown (line 120) | void onTouchDown(const WidgetCursor &widgetCursor) {
FILE: eez_psu_sketch/gui_widget_button_group.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/idle.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type idle (line 27) | namespace idle {
type ActivityType (line 29) | enum ActivityType {
function tick (line 43) | void tick() {
function noteScpiActivity (line 60) | void noteScpiActivity() {
function noteGuiActivity (line 65) | void noteGuiActivity() {
function noteEncoderActivity (line 72) | void noteEncoderActivity() {
function getGuiAndEncoderInactivityPeriod (line 79) | uint32_t getGuiAndEncoderInactivityPeriod() {
function isIdle (line 87) | bool isIdle() {
FILE: eez_psu_sketch/idle.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/io_pins.cpp
type eez (line 24) | namespace eez {
type psu (line 25) | namespace psu {
type io_pins (line 26) | namespace io_pins {
function isOutputFault (line 44) | uint8_t isOutputFault() {
function isOutputEnabled (line 61) | uint8_t isOutputEnabled() {
function updateFaultPin (line 71) | void updateFaultPin(int i) {
function updateOnCouplePin (line 81) | void updateOnCouplePin(int i) {
function tick (line 92) | void tick(uint32_t tickCount) {
function onTrigger (line 166) | void onTrigger() {
function refresh (line 180) | void refresh() {
function isInhibited (line 197) | bool isInhibited() {
function setDigitalOutputPinState (line 201) | void setDigitalOutputPinState(int pin, bool state) {
function getDigitalOutputPinState (line 217) | bool getDigitalOutputPinState(int pin) {
FILE: eez_psu_sketch/io_pins.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/ioexp.cpp
type eez (line 22) | namespace eez {
type psu (line 23) | namespace psu {
FILE: eez_psu_sketch/ioexp.h
function namespace (line 48) | namespace eez {
FILE: eez_psu_sketch/lcd.cpp
type eez (line 49) | namespace eez {
type psu (line 50) | namespace psu {
type gui (line 51) | namespace gui {
type lcd (line 52) | namespace lcd {
function rgbToHsl (line 56) | void rgbToHsl(float r, float g, float b, float &h, float &s, flo...
function hue2rgb (line 95) | float hue2rgb(float p, float q, float t) {
function hslToRgb (line 104) | void hslToRgb(float h, float s, float l, float &r, float &g, flo...
function init (line 1213) | void init() {
function tick (line 1221) | void tick(uint32_t tickCount) {
function isOn (line 1238) | bool isOn() {
function getBrightness (line 1242) | static uint8_t getBrightness() {
function turnOn (line 1246) | void turnOn(bool withoutTransition) {
function turnOff (line 1260) | void turnOff() {
function updateBrightness (line 1270) | void updateBrightness() {
FILE: eez_psu_sketch/lcd.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/list.cpp
type eez (line 30) | namespace eez {
type psu (line 31) | namespace psu {
type list (line 32) | namespace list {
function init (line 62) | void init() {
function resetChannelList (line 66) | void resetChannelList(Channel &channel) {
function reset (line 80) | void reset() {
function setDwellList (line 86) | void setDwellList(Channel &channel, float *list, uint16_t listLeng...
function setVoltageList (line 97) | void setVoltageList(Channel &channel, float *list, uint16_t listLe...
function setCurrentList (line 108) | void setCurrentList(Channel &channel, float *list, uint16_t listLe...
function getListsChanged (line 119) | bool getListsChanged(Channel &channel) {
function setListsChanged (line 123) | void setListsChanged(Channel &channel, bool changed) {
function getListCount (line 127) | uint16_t getListCount(Channel &channel) {
function setListCount (line 131) | void setListCount(Channel &channel, uint16_t value) {
function isListEmpty (line 135) | bool isListEmpty(Channel &channel) {
function areListLengthsEquivalent (line 141) | bool areListLengthsEquivalent(uint16_t size1, uint16_t size2) {
function areListLengthsEquivalent (line 145) | bool areListLengthsEquivalent(uint16_t size1, uint16_t size2, uint...
function areListLengthsEquivalent (line 151) | bool areListLengthsEquivalent(Channel &channel) {
function areVoltageAndDwellListLengthsEquivalent (line 159) | bool areVoltageAndDwellListLengthsEquivalent(Channel &channel) {
function areCurrentAndDwellListLengthsEquivalent (line 163) | bool areCurrentAndDwellListLengthsEquivalent(Channel &channel) {
function areVoltageAndCurrentListLengthsEquivalent (line 167) | bool areVoltageAndCurrentListLengthsEquivalent(Channel &channel) {
function checkLimits (line 171) | int checkLimits(int iChannel) {
function loadList (line 196) | bool loadList(Channel &channel, const char *filePath, int *err) {
function saveList (line 319) | bool saveList(Channel &channel, const char *filePath, int *err) {
function executionStart (line 383) | void executionStart(Channel &channel) {
function maxListsSize (line 390) | int maxListsSize(Channel &channel) {
function setListValue (line 408) | bool setListValue(Channel &channel, int16_t it, int *err) {
function tick (line 437) | void tick(uint32_t tick_usec) {
function isActive (line 519) | bool isActive() {
function isActive (line 523) | bool isActive(Channel &channel) {
function anyCounterVisible (line 527) | bool anyCounterVisible(uint32_t totalThreshold) {
function getCurrentDwellTime (line 536) | bool getCurrentDwellTime(Channel &channel, int32_t &remaining, uin...
function abort (line 550) | void abort() {
FILE: eez_psu_sketch/list.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/ntp.cpp
type eez (line 42) | namespace eez {
type psu (line 43) | namespace psu {
type ntp (line 44) | namespace ntp {
type State (line 51) | enum State {
function sendNtpPacket (line 81) | int sendNtpPacket() {
function readNtpPacket (line 136) | void readNtpPacket() {
function begin (line 171) | void begin() {
function init (line 177) | void init() {
function setState (line 183) | void setState(State state) {
function tick (line 196) | void tick(uint32_t tickCount) {
function reset (line 249) | void reset() {
function testNtpServer (line 256) | void testNtpServer(const char *ntpServer) {
function isTestNtpServerDone (line 262) | bool isTestNtpServerDone(bool &result) {
FILE: eez_psu_sketch/ntp.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/ontime.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type ontime (line 27) | namespace ontime {
function counterToString (line 29) | void counterToString(char *str, size_t count, uint32_t counterTime) {
FILE: eez_psu_sketch/ontime.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/persist_conf.cpp
type eez (line 37) | namespace eez {
type psu (line 38) | namespace psu {
type persist_conf (line 39) | namespace persist_conf {
type PersistConfSection (line 45) | enum PersistConfSection {
function calc_checksum (line 76) | uint32_t calc_checksum(const BlockHeader *block, uint16_t size) {
function check_block (line 80) | bool check_block(const BlockHeader *block, uint16_t size, uint16_t...
function save (line 84) | bool save(BlockHeader *block, uint16_t size, uint16_t address, uin...
function get_address (line 94) | uint16_t get_address(PersistConfSection section, Channel *channel ...
function get_profile_address (line 104) | uint16_t get_profile_address(int location) {
function initDevice (line 110) | static void initDevice() {
function loadDevice (line 157) | void loadDevice() {
function saveDevice (line 178) | bool saveDevice() {
function initEthernetSettings (line 182) | static void initEthernetSettings() {
function initDevice2 (line 191) | static void initDevice2() {
function loadDevice2 (line 219) | void loadDevice2() {
function saveDevice2 (line 257) | bool saveDevice2() {
function isSystemPasswordValid (line 261) | bool isSystemPasswordValid(const char *new_password, size_t new_pa...
function changeSystemPassword (line 275) | bool changeSystemPassword(const char *new_password, size_t new_pas...
function isCalibrationPasswordValid (line 285) | bool isCalibrationPasswordValid(const char *new_password, size_t n...
function changeCalibrationPassword (line 299) | bool changeCalibrationPassword(const char *new_password, size_t ne...
function changeSerial (line 309) | bool changeSerial(const char *newSerialNumber, size_t newSerialNum...
function enableSound (line 323) | bool enableSound(bool enable) {
function isSoundEnabled (line 332) | bool isSoundEnabled() {
function enableClickSound (line 336) | bool enableClickSound(bool enable) {
function isClickSoundEnabled (line 344) | bool isClickSoundEnabled() {
function readSystemDate (line 348) | bool readSystemDate(uint8_t &year, uint8_t &month, uint8_t &day) {
function isDst (line 358) | bool isDst() {
function setDst (line 368) | void setDst(unsigned dst) {
function writeSystemDate (line 378) | void writeSystemDate(uint8_t year, uint8_t month, uint8_t day, uns...
function readSystemTime (line 390) | bool readSystemTime(uint8_t &hour, uint8_t &minute, uint8_t &secon...
function writeSystemTime (line 400) | void writeSystemTime(uint8_t hour, uint8_t minute, uint8_t second,...
function writeSystemDateTime (line 412) | void writeSystemDateTime(uint8_t year, uint8_t month, uint8_t day,...
function enableProfileAutoRecall (line 430) | bool enableProfileAutoRecall(bool enable) {
function isProfileAutoRecallEnabled (line 435) | bool isProfileAutoRecallEnabled() {
function setProfileAutoRecallLocation (line 439) | bool setProfileAutoRecallLocation(int location) {
function getProfileAutoRecallLocation (line 453) | int getProfileAutoRecallLocation() {
function toggleChannelsViewMode (line 457) | void toggleChannelsViewMode() {
function setChannelsViewMode (line 462) | void setChannelsViewMode(unsigned int channelsViewMode) {
function loadChannelCalibration (line 467) | void loadChannelCalibration(Channel &channel) {
function saveChannelCalibration (line 479) | bool saveChannelCalibration(Channel &channel) {
function saveCalibrationEnabledFlag (line 483) | void saveCalibrationEnabledFlag(Channel &channel, bool enabled) {
function loadProfile (line 494) | bool loadProfile(int location, profile::Parameters *profile) {
function saveProfile (line 502) | bool saveProfile(int location, profile::Parameters *profile) {
function readTotalOnTime (line 506) | uint32_t readTotalOnTime(int type) {
function writeTotalOnTime (line 528) | bool writeTotalOnTime(int type, uint32_t time) {
function enableOutputProtectionCouple (line 543) | bool enableOutputProtectionCouple(bool enable) {
function isOutputProtectionCoupleEnabled (line 567) | bool isOutputProtectionCoupleEnabled() {
function enableShutdownWhenProtectionTripped (line 571) | bool enableShutdownWhenProtectionTripped(bool enable) {
function isShutdownWhenProtectionTrippedEnabled (line 595) | bool isShutdownWhenProtectionTrippedEnabled() {
function enableForceDisablingAllOutputsOnPowerUp (line 599) | bool enableForceDisablingAllOutputsOnPowerUp(bool enable) {
function isForceDisablingAllOutputsOnPowerUpEnabled (line 623) | bool isForceDisablingAllOutputsOnPowerUpEnabled() {
function lockFrontPanel (line 627) | bool lockFrontPanel(bool lock) {
function setEncoderSettings (line 654) | bool setEncoderSettings(uint8_t confirmationMode, uint8_t movingSp...
function setDisplayState (line 666) | bool setDisplayState(unsigned newState) {
function setDisplayBrightness (line 680) | bool setDisplayBrightness(uint8_t displayBrightness) {
function setDisplayBackgroundLuminosityStep (line 690) | bool setDisplayBackgroundLuminosityStep(uint8_t displayBackgroundL...
function enableSerial (line 701) | bool enableSerial(bool enable) {
function isSerialEnabled (line 712) | bool isSerialEnabled() {
function getIndexFromBaud (line 716) | int getIndexFromBaud(long baud) {
function getBaudFromIndex (line 725) | long getBaudFromIndex(int index) {
function getSerialBaudIndex (line 729) | int getSerialBaudIndex() {
function setSerialBaudIndex (line 733) | bool setSerialBaudIndex(int baudIndex) {
function getSerialParity (line 744) | int getSerialParity() {
function setSerialParity (line 748) | bool setSerialParity(int parity) {
function setSerialSettings (line 759) | bool setSerialSettings(bool enabled, int baudIndex, int parity) {
function enableEthernet (line 779) | bool enableEthernet(bool enable) {
function isEthernetEnabled (line 792) | bool isEthernetEnabled() {
function enableEthernetDhcp (line 796) | bool enableEthernetDhcp(bool enable) {
function isEthernetDhcpEnabled (line 807) | bool isEthernetDhcpEnabled() {
function setEthernetMacAddress (line 811) | bool setEthernetMacAddress(uint8_t macAddress[]) {
function setEthernetIpAddress (line 821) | bool setEthernetIpAddress(uint32_t ipAddress) {
function setEthernetDns (line 831) | bool setEthernetDns(uint32_t dns) {
function setEthernetGateway (line 841) | bool setEthernetGateway(uint32_t gateway) {
function setEthernetSubnetMask (line 851) | bool setEthernetSubnetMask(uint32_t subnetMask) {
function setEthernetScpiPort (line 861) | bool setEthernetScpiPort(uint16_t scpiPort) {
function setEthernetSettings (line 871) | bool setEthernetSettings(bool enable, bool dhcpEnable, uint32_t ip...
function enableNtp (line 909) | bool enableNtp(bool enable) {
function isNtpEnabled (line 914) | bool isNtpEnabled() {
function setNtpServer (line 918) | bool setNtpServer(const char *ntpServer, size_t ntpServerLength) {
function setNtpSettings (line 924) | bool setNtpSettings(bool enable, const char *ntpServer) {
function setSdLocked (line 930) | bool setSdLocked(bool sdLocked) {
function isSdLocked (line 935) | bool isSdLocked() {
FILE: eez_psu_sketch/persist_conf.h
function namespace (line 21) | namespace eez {
function namespace (line 34) | namespace eez {
FILE: eez_psu_sketch/pid.h
function class (line 5) | class PID
FILE: eez_psu_sketch/profile.cpp
type eez (line 34) | namespace eez {
type psu (line 35) | namespace psu {
type profile (line 36) | namespace profile {
function tick (line 45) | void tick(uint32_t tickCount) {
function getChannelProfileListFilePath (line 55) | void getChannelProfileListFilePath(Channel &channel, int location,...
function recallChannelsFromProfile (line 65) | void recallChannelsFromProfile(Parameters *profile, int location) {
function recallFromProfile (line 161) | bool recallFromProfile(Parameters *profile, int location) {
function recall (line 180) | bool recall(int location) {
function recallFromFile (line 197) | bool recallFromFile(const char *filePath, int *err) {
function load (line 247) | bool load(int location, Parameters *profile) {
function getSaveName (line 257) | void getSaveName(const Parameters *profile, char *name) {
function enableSave (line 266) | bool enableSave(bool enable) {
function save (line 272) | void save() {
function saveImmediately (line 277) | void saveImmediately() {
function fillProfile (line 285) | void fillProfile(Parameters *pProfile, int location, const char *n...
function saveAtLocation (line 413) | bool saveAtLocation(int location, const char *name) {
function saveToFile (line 430) | bool saveToFile(const char *filePath, int *err) {
function deleteLocation (line 473) | bool deleteLocation(int location) {
function deleteAll (line 486) | bool deleteAll() {
function isValid (line 495) | bool isValid(int location) {
function setName (line 505) | bool setName(int location, const char *name, size_t name_len) {
function getName (line 517) | void getName(int location, char *name, int count) {
FILE: eez_psu_sketch/profile.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/psu.cpp
function loadConf (line 107) | void loadConf() {
function init (line 122) | void init() {
function testChannels (line 182) | static bool testChannels() {
function testShield (line 197) | static bool testShield() {
function test (line 216) | bool test() {
function psuReset (line 241) | static bool psuReset() {
function loadAutoRecallProfile (line 377) | static bool loadAutoRecallProfile(profile::Parameters *profile, int *loc...
function autoRecall (line 433) | static bool autoRecall() {
function boot (line 446) | void boot() {
function powerUp (line 583) | bool powerUp() {
function powerDown (line 650) | void powerDown() {
function isPowerUp (line 691) | bool isPowerUp() {
function changePowerState (line 695) | bool changePowerState(bool up) {
function schedulePowerDown (line 742) | void schedulePowerDown() {
function powerDownBySensor (line 746) | void powerDownBySensor() {
function reset (line 768) | bool reset() {
function disableChannels (line 778) | static void disableChannels() {
function onProtectionTripped (line 786) | void onProtectionTripped() {
function regSet (line 957) | void regSet(scpi_reg_name_t name, scpi_reg_val_t val) {
function psuRegSet (line 968) | void psuRegSet(scpi_psu_reg_name_t name, scpi_reg_val_t val) {
function setEsrBits (line 979) | void setEsrBits(int bit_mask) {
function setQuesBits (line 991) | void setQuesBits(int bit_mask, bool on) {
function setOperBits (line 1002) | void setOperBits(int bit_mask, bool on) {
function generateError (line 1013) | void generateError(int16_t error) {
function SPI_usingInterrupt (line 1027) | void SPI_usingInterrupt(uint8_t interruptNumber) {
function SPI_beginTransaction (line 1034) | void SPI_beginTransaction(SPISettings &settings) {
function SPI_endTransaction (line 1054) | void SPI_endTransaction() {
function isMaxCurrentLimited (line 1100) | bool isMaxCurrentLimited() {
function limitMaxCurrent (line 1104) | void limitMaxCurrent(MaxCurrentLimitCause cause) {
function unlimitMaxCurrent (line 1122) | void unlimitMaxCurrent() {
function MaxCurrentLimitCause (line 1126) | MaxCurrentLimitCause getMaxCurrentLimitCause() {
function isFrontPanelLocked (line 1130) | bool isFrontPanelLocked() {
function TC_SetCMR_ChannelA (line 1139) | static void TC_SetCMR_ChannelA(Tc *tc, uint32_t chan, uint32_t v) {
function TC_SetCMR_ChannelB (line 1143) | static void TC_SetCMR_ChannelB(Tc *tc, uint32_t chan, uint32_t v) {
function startMasterSync (line 1148) | void startMasterSync() {
function updateMasterSync (line 1202) | void updateMasterSync() {
function PSU_boot (line 1233) | void PSU_boot() {
function PSU_tick (line 1237) | void PSU_tick() {
FILE: eez_psu_sketch/psu.h
function namespace (line 57) | namespace eez {
FILE: eez_psu_sketch/rtc.cpp
type eez (line 22) | namespace eez {
type psu (line 23) | namespace psu {
type rtc (line 24) | namespace rtc {
function readRegisters (line 30) | void readRegisters(int command, int n, uint8_t *values) {
function writeRegisters (line 41) | void writeRegisters(int command, int n, const uint8_t *values) {
function init (line 52) | void init() {
function test (line 55) | bool test() {
function readDate (line 88) | bool readDate(uint8_t &year, uint8_t &month, uint8_t &day) {
function writeDate (line 103) | bool writeDate(uint8_t year, uint8_t month, uint8_t day) {
function readTime (line 120) | bool readTime(uint8_t &hour, uint8_t &minute, uint8_t &second) {
function writeTime (line 135) | bool writeTime(uint8_t hour, uint8_t minute, uint8_t second) {
function readDateTime (line 151) | bool readDateTime(uint8_t &year, uint8_t &month, uint8_t &day, uin...
function writeDateTime (line 169) | bool writeDateTime(uint8_t year, uint8_t month, uint8_t day, uint8...
FILE: eez_psu_sketch/rtc.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/scpi_appl.cpp
type eez (line 23) | namespace eez {
type psu (line 24) | namespace psu {
type scpi (line 25) | namespace scpi {
function scpi_result_t (line 37) | scpi_result_t scpi_cmd_apply(scpi_t *context) {
function scpi_result_t (line 91) | scpi_result_t scpi_cmd_applyQ(scpi_t * context) {
FILE: eez_psu_sketch/scpi_cal.cpp
type eez (line 30) | namespace eez {
type psu (line 31) | namespace psu {
type scpi (line 32) | namespace scpi {
function scpi_result_t (line 53) | static scpi_result_t calibration_level(scpi_t * context, calibrati...
function scpi_result_t (line 75) | static scpi_result_t calibration_data(scpi_t * context, calibratio...
function scpi_result_t (line 114) | scpi_result_t scpi_cmd_calibrationClear(scpi_t * context) {
function scpi_result_t (line 135) | scpi_result_t scpi_cmd_calibrationMode(scpi_t * context) {
function scpi_result_t (line 183) | scpi_result_t scpi_cmd_calibrationModeQ(scpi_t * context) {
function scpi_result_t (line 188) | scpi_result_t scpi_cmd_calibrationCurrentData(scpi_t * context) {
function scpi_result_t (line 192) | scpi_result_t scpi_cmd_calibrationCurrentLevel(scpi_t * context) {
function scpi_result_t (line 196) | scpi_result_t scpi_cmd_calibrationCurrentRange(scpi_t * context) {
function scpi_result_t (line 217) | scpi_result_t scpi_cmd_calibrationPasswordNew(scpi_t * context) {
function scpi_result_t (line 243) | scpi_result_t scpi_cmd_calibrationRemark(scpi_t * context) {
function scpi_result_t (line 265) | scpi_result_t scpi_cmd_calibrationRemarkQ(scpi_t * context) {
function scpi_result_t (line 282) | scpi_result_t scpi_cmd_calibrationSave(scpi_t * context) {
function scpi_result_t (line 297) | scpi_result_t scpi_cmd_calibrationState(scpi_t * context) {
function scpi_result_t (line 336) | scpi_result_t scpi_cmd_calibrationStateQ(scpi_t * context) {
function scpi_result_t (line 345) | scpi_result_t scpi_cmd_calibrationVoltageData(scpi_t * context) {
function scpi_result_t (line 349) | scpi_result_t scpi_cmd_calibrationVoltageLevel(scpi_t * context) {
function scpi_result_t (line 353) | scpi_result_t scpi_cmd_calibrationScreenInit(scpi_t * context) {
FILE: eez_psu_sketch/scpi_core.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type scpi (line 27) | namespace scpi {
function scpi_result_t (line 31) | scpi_result_t scpi_cmd_coreCls(scpi_t * context) {
function scpi_result_t (line 35) | scpi_result_t scpi_cmd_coreEse(scpi_t * context) {
function scpi_result_t (line 39) | scpi_result_t scpi_cmd_coreEseQ(scpi_t * context) {
function scpi_result_t (line 43) | scpi_result_t scpi_cmd_coreEsrQ(scpi_t * context) {
function scpi_result_t (line 47) | scpi_result_t scpi_cmd_coreIdnQ(scpi_t * context) {
function scpi_result_t (line 51) | scpi_result_t scpi_cmd_coreOpc(scpi_t * context) {
function scpi_result_t (line 55) | scpi_result_t scpi_cmd_coreOpcQ(scpi_t * context) {
function scpi_result_t (line 66) | scpi_result_t scpi_cmd_coreRcl(scpi_t * context) {
function scpi_result_t (line 80) | scpi_result_t scpi_cmd_coreRst(scpi_t * context) {
function scpi_result_t (line 91) | scpi_result_t scpi_cmd_coreSav(scpi_t * context) {
function scpi_result_t (line 105) | scpi_result_t scpi_cmd_coreSre(scpi_t * context) {
function scpi_result_t (line 109) | scpi_result_t scpi_cmd_coreSreQ(scpi_t * context) {
function scpi_result_t (line 113) | scpi_result_t scpi_cmd_coreStbQ(scpi_t * context) {
function scpi_result_t (line 125) | scpi_result_t scpi_cmd_coreTstQ(scpi_t * context) {
function scpi_result_t (line 131) | scpi_result_t scpi_cmd_coreWai(scpi_t * context) {
FILE: eez_psu_sketch/scpi_debug.cpp
type eez (line 27) | namespace eez {
type psu (line 28) | namespace psu {
type scpi (line 34) | namespace scpi {
function scpi_result_t (line 36) | scpi_result_t scpi_cmd_debug(scpi_t *context) {
function scpi_result_t (line 52) | scpi_result_t scpi_cmd_debugQ(scpi_t *context) {
function scpi_result_t (line 70) | scpi_result_t scpi_cmd_debugWdog(scpi_t * context) {
function scpi_result_t (line 91) | scpi_result_t scpi_cmd_debugWdogQ(scpi_t * context) {
function scpi_result_t (line 107) | scpi_result_t scpi_cmd_debugOntimeQ(scpi_t *context) {
function scpi_result_t (line 131) | scpi_result_t scpi_cmd_debugVoltage(scpi_t *context) {
function scpi_result_t (line 152) | scpi_result_t scpi_cmd_debugCurrent(scpi_t *context) {
function scpi_result_t (line 173) | scpi_result_t scpi_cmd_debugMeasureVoltage(scpi_t *context) {
function scpi_result_t (line 216) | scpi_result_t scpi_cmd_debugMeasureCurrent(scpi_t *context) {
function scpi_result_t (line 259) | scpi_result_t scpi_cmd_debugFan(scpi_t * context) {
function scpi_result_t (line 282) | scpi_result_t scpi_cmd_debugFanQ(scpi_t * context) {
function scpi_result_t (line 288) | scpi_result_t scpi_cmd_debugFanPid(scpi_t * context) {
function scpi_result_t (line 314) | scpi_result_t scpi_cmd_debugFanPidQ(scpi_t * context) {
FILE: eez_psu_sketch/scpi_diag.cpp
type eez (line 29) | namespace eez {
type psu (line 30) | namespace psu {
type scpi (line 31) | namespace scpi {
function printCalibrationValue (line 35) | static void printCalibrationValue(scpi_t *context, char *buffer, c...
function printCalibrationParameters (line 67) | void printCalibrationParameters(scpi_t *context, ValueType valueTy...
function scpi_result_t (line 105) | scpi_result_t scpi_cmd_diagnosticInformationAdcQ(scpi_t * context) {
function scpi_result_t (line 134) | scpi_result_t scpi_cmd_diagnosticInformationCalibrationQ(scpi_t *c...
function scpi_result_t (line 166) | scpi_result_t scpi_cmd_diagnosticInformationProtectionQ(scpi_t * c...
function scpi_result_t (line 225) | scpi_result_t scpi_cmd_diagnosticInformationTestQ(scpi_t * context) {
function scpi_result_t (line 290) | scpi_result_t scpi_cmd_diagnosticInformationFanQ(scpi_t * context) {
FILE: eez_psu_sketch/scpi_display.cpp
type eez (line 28) | namespace eez {
type psu (line 29) | namespace psu {
type scpi (line 30) | namespace scpi {
function scpi_result_t (line 32) | scpi_result_t scpi_cmd_displayBrightness(scpi_t *context) {
function scpi_result_t (line 53) | scpi_result_t scpi_cmd_displayBrightnessQ(scpi_t *context) {
function scpi_result_t (line 63) | scpi_result_t scpi_cmd_displayView(scpi_t *context) {
function scpi_result_t (line 84) | scpi_result_t scpi_cmd_displayViewQ(scpi_t *context) {
function scpi_result_t (line 94) | scpi_result_t scpi_cmd_displayWindowState(scpi_t *context) {
function scpi_result_t (line 113) | scpi_result_t scpi_cmd_displayWindowStateQ(scpi_t *context) {
function scpi_result_t (line 123) | scpi_result_t scpi_cmd_displayWindowText(scpi_t *context) {
function scpi_result_t (line 145) | scpi_result_t scpi_cmd_displayWindowTextQ(scpi_t *context) {
function scpi_result_t (line 155) | scpi_result_t scpi_cmd_displayWindowTextClear(scpi_t *context) {
FILE: eez_psu_sketch/scpi_dlog.cpp
type eez (line 26) | namespace eez {
type psu (line 27) | namespace psu {
type scpi (line 28) | namespace scpi {
function scpi_result_t (line 30) | scpi_result_t scpi_cmd_abortDlog(scpi_t * context) {
function scpi_result_t (line 40) | scpi_result_t scpi_cmd_initiateDlog(scpi_t * context) {
function scpi_result_t (line 65) | scpi_result_t scpi_cmd_senseDlogFunctionVoltage(scpi_t * context) {
function scpi_result_t (line 91) | scpi_result_t scpi_cmd_senseDlogFunctionVoltageQ(scpi_t * context) {
function scpi_result_t (line 107) | scpi_result_t scpi_cmd_senseDlogFunctionCurrent(scpi_t * context) {
function scpi_result_t (line 133) | scpi_result_t scpi_cmd_senseDlogFunctionCurrentQ(scpi_t * context) {
function scpi_result_t (line 149) | scpi_result_t scpi_cmd_senseDlogFunctionPower(scpi_t * context) {
function scpi_result_t (line 175) | scpi_result_t scpi_cmd_senseDlogFunctionPowerQ(scpi_t * context) {
function scpi_result_t (line 191) | scpi_result_t scpi_cmd_senseDlogPeriod(scpi_t * context) {
function scpi_result_t (line 238) | scpi_result_t scpi_cmd_senseDlogPeriodQ(scpi_t * context) {
function scpi_result_t (line 248) | scpi_result_t scpi_cmd_senseDlogTime(scpi_t * context) {
function scpi_result_t (line 295) | scpi_result_t scpi_cmd_senseDlogTimeQ(scpi_t * context) {
FILE: eez_psu_sketch/scpi_inst.cpp
type eez (line 26) | namespace eez {
type psu (line 27) | namespace psu {
type scpi (line 28) | namespace scpi {
function select_channel (line 50) | static void select_channel(scpi_t * context, uint8_t ch) {
function scpi_result_t (line 57) | scpi_result_t scpi_cmd_instrumentSelect(scpi_t * context) {
function scpi_result_t (line 73) | scpi_result_t scpi_cmd_instrumentSelectQ(scpi_t * context) {
function scpi_result_t (line 83) | scpi_result_t scpi_cmd_instrumentNselect(scpi_t * context) {
function scpi_result_t (line 103) | scpi_result_t scpi_cmd_instrumentNselectQ(scpi_t * context) {
function scpi_result_t (line 111) | scpi_result_t scpi_cmd_instrumentCoupleTracking(scpi_t * context) {
function scpi_result_t (line 142) | scpi_result_t scpi_cmd_instrumentCoupleTrackingQ(scpi_t * context) {
function scpi_result_t (line 164) | scpi_result_t scpi_cmd_instrumentDisplayTrace(scpi_t * context) {
function scpi_result_t (line 199) | scpi_result_t scpi_cmd_instrumentDisplayTraceQ(scpi_t * context) {
function scpi_result_t (line 232) | scpi_result_t scpi_cmd_instrumentDisplayTraceSwap(scpi_t * context) {
function scpi_result_t (line 242) | scpi_result_t scpi_cmd_instrumentDisplayYtRate(scpi_t * context) {
function scpi_result_t (line 257) | scpi_result_t scpi_cmd_instrumentDisplayYtRateQ(scpi_t * context) {
FILE: eez_psu_sketch/scpi_meas.cpp
type eez (line 24) | namespace eez {
type psu (line 25) | namespace psu {
type scpi (line 26) | namespace scpi {
function scpi_result_t (line 30) | scpi_result_t scpi_cmd_measureScalarCurrentDcQ(scpi_t * context) {
function scpi_result_t (line 43) | scpi_result_t scpi_cmd_measureScalarPowerDcQ(scpi_t * context) {
function scpi_result_t (line 56) | scpi_result_t scpi_cmd_measureScalarVoltageDcQ(scpi_t * context) {
function scpi_result_t (line 69) | scpi_result_t scpi_cmd_measureScalarTemperatureThermistorDcQ(scpi_...
FILE: eez_psu_sketch/scpi_mem.cpp
type eez (line 24) | namespace eez {
type psu (line 25) | namespace psu {
type scpi (line 26) | namespace scpi {
function scpi_result_t (line 30) | scpi_result_t scpi_cmd_memoryNstatesQ(scpi_t *context) {
function scpi_result_t (line 36) | scpi_result_t scpi_cmd_memoryStateCatalogQ(scpi_t *context) {
function scpi_result_t (line 47) | scpi_result_t scpi_cmd_memoryStateDelete(scpi_t *context) {
function scpi_result_t (line 61) | scpi_result_t scpi_cmd_memoryStateDeleteAll(scpi_t *context) {
function scpi_result_t (line 70) | scpi_result_t scpi_cmd_memoryStateName(scpi_t *context) {
function scpi_result_t (line 100) | scpi_result_t scpi_cmd_memoryStateNameQ(scpi_t *context) {
function scpi_result_t (line 114) | scpi_result_t scpi_cmd_memoryStateRecallAuto(scpi_t *context) {
function scpi_result_t (line 128) | scpi_result_t scpi_cmd_memoryStateRecallAutoQ(scpi_t *context) {
function scpi_result_t (line 134) | scpi_result_t scpi_cmd_memoryStateRecallSelect(scpi_t *context) {
function scpi_result_t (line 153) | scpi_result_t scpi_cmd_memoryStateRecallSelectQ(scpi_t *context) {
function scpi_result_t (line 159) | scpi_result_t scpi_cmd_memoryStateValidQ(scpi_t *context) {
FILE: eez_psu_sketch/scpi_mmem.cpp
type eez (line 34) | namespace eez {
type psu (line 35) | namespace psu {
type scpi (line 36) | namespace scpi {
function addExtension (line 42) | void addExtension(char *filePath, const char *ext) {
function scpi_result_t (line 50) | scpi_result_t scpi_cmd_mmemoryCdirectory(scpi_t *context) {
function scpi_result_t (line 75) | scpi_result_t scpi_cmd_mmemoryCdirectoryQ(scpi_t *context) {
function catalogCallback (line 93) | void catalogCallback(void *param, const char *name, const char *ty...
function scpi_result_t (line 124) | scpi_result_t scpi_cmd_mmemoryCatalogQ(scpi_t *context) {
function scpi_result_t (line 146) | scpi_result_t scpi_cmd_mmemoryCatalogLengthQ(scpi_t *context) {
function scpi_result_t (line 171) | scpi_result_t scpi_cmd_mmemoryInformationQ(scpi_t *context) {
function uploadCallback (line 192) | void uploadCallback(void *param, const void *buffer, size_t size) {
function scpi_result_t (line 210) | scpi_result_t scpi_cmd_mmemoryUploadQ(scpi_t *context) {
function startDownloading (line 250) | void startDownloading() {
function finishDownloading (line 258) | void finishDownloading(int16_t eventId) {
function abortDownloading (line 270) | void abortDownloading() {
function scpi_result_t (line 276) | scpi_result_t scpi_cmd_mmemoryDownloadFname(scpi_t *context) {
function scpi_result_t (line 297) | scpi_result_t scpi_cmd_mmemoryDownloadSize(scpi_t *context) {
function scpi_result_t (line 319) | scpi_result_t scpi_cmd_mmemoryDownloadData(scpi_t *context) {
function scpi_result_t (line 368) | scpi_result_t scpi_cmd_mmemoryDownloadAbort(scpi_t *context) {
function scpi_result_t (line 380) | scpi_result_t scpi_cmd_mmemoryMove(scpi_t *context) {
function scpi_result_t (line 412) | scpi_result_t scpi_cmd_mmemoryCopy(scpi_t *context) {
function scpi_result_t (line 445) | scpi_result_t scpi_cmd_mmemoryDelete(scpi_t *context) {
function scpi_result_t (line 472) | scpi_result_t scpi_cmd_mmemoryMdirectory(scpi_t *context) {
function scpi_result_t (line 499) | scpi_result_t scpi_cmd_mmemoryRdirectory(scpi_t *context) {
function scpi_result_t (line 528) | scpi_result_t scpi_cmd_mmemoryDateQ(scpi_t *context) {
function scpi_result_t (line 555) | scpi_result_t scpi_cmd_mmemoryTimeQ(scpi_t *context) {
function scpi_result_t (line 584) | scpi_result_t scpi_cmd_mmemoryLock(scpi_t *context) {
function scpi_result_t (line 599) | scpi_result_t scpi_cmd_mmemoryLockQ(scpi_t *context) {
function scpi_result_t (line 609) | scpi_result_t scpi_cmd_mmemoryUnlock(scpi_t *context) {
function scpi_result_t (line 626) | scpi_result_t scpi_cmd_mmemoryLoadList(scpi_t *context) {
function scpi_result_t (line 656) | scpi_result_t scpi_cmd_mmemoryStoreList(scpi_t *context) {
function scpi_result_t (line 695) | scpi_result_t scpi_cmd_mmemoryLoadProfile(scpi_t *context) {
function scpi_result_t (line 715) | scpi_result_t scpi_cmd_mmemoryStoreProfile(scpi_t *context) {
FILE: eez_psu_sketch/scpi_outp.cpp
type eez (line 27) | namespace eez {
type psu (line 28) | namespace psu {
type scpi (line 29) | namespace scpi {
function scpi_result_t (line 33) | scpi_result_t scpi_cmd_outputModeQ(scpi_t *context) {
function scpi_result_t (line 44) | scpi_result_t scpi_cmd_outputProtectionClear(scpi_t * context) {
function scpi_result_t (line 55) | scpi_result_t scpi_cmd_outputState(scpi_t * context) {
function scpi_result_t (line 94) | scpi_result_t scpi_cmd_outputStateQ(scpi_t * context) {
function scpi_result_t (line 105) | scpi_result_t scpi_cmd_outputTrackState(scpi_t * context) {
function scpi_result_t (line 143) | scpi_result_t scpi_cmd_outputTrackStateQ(scpi_t * context) {
function scpi_result_t (line 159) | scpi_result_t scpi_cmd_outputProtectionCouple(scpi_t * context) {
function scpi_result_t (line 173) | scpi_result_t scpi_cmd_outputProtectionCoupleQ(scpi_t * context) {
function scpi_result_t (line 179) | scpi_result_t scpi_cmd_outputStateTriggered(scpi_t *context) {
function scpi_result_t (line 195) | scpi_result_t scpi_cmd_outputStateTriggeredQ(scpi_t *context) {
FILE: eez_psu_sketch/scpi_params.cpp
type eez (line 24) | namespace eez {
type psu (line 25) | namespace psu {
type scpi (line 26) | namespace scpi {
function check_channel (line 53) | bool check_channel(scpi_t *context, int32_t ch) {
function Channel (line 82) | Channel *param_channel(scpi_t *context, scpi_bool_t mandatory, scp...
function Channel (line 98) | Channel *set_channel_from_command_number(scpi_t *context) {
function param_temp_sensor (line 113) | bool param_temp_sensor(scpi_t *context, int32_t &sensor) {
function get_voltage_param (line 134) | bool get_voltage_param(scpi_t *context, float &value, const Channe...
function get_voltage_protection_level_param (line 143) | bool get_voltage_protection_level_param(scpi_t *context, float &va...
function get_current_param (line 152) | bool get_current_param(scpi_t *context, float &value, const Channe...
function get_power_param (line 161) | bool get_power_param(scpi_t *context, float &value, float min, flo...
function get_temperature_param (line 170) | bool get_temperature_param(scpi_t *context, float &value, float mi...
function get_duration_param (line 179) | bool get_duration_param(scpi_t *context, float &value, float min, ...
function get_voltage_from_param (line 188) | bool get_voltage_from_param(scpi_t *context, const scpi_number_t &...
function get_voltage_protection_level_from_param (line 236) | bool get_voltage_protection_level_from_param(scpi_t *context, cons...
function get_current_from_param (line 267) | bool get_current_from_param(scpi_t *context, const scpi_number_t &...
function get_power_from_param (line 307) | bool get_power_from_param(scpi_t *context, const scpi_number_t &pa...
function get_temperature_from_param (line 338) | bool get_temperature_from_param(scpi_t *context, const scpi_number...
function get_duration_from_param (line 370) | bool get_duration_from_param(scpi_t *context, const scpi_number_t ...
function get_voltage_limit_param (line 402) | bool get_voltage_limit_param(scpi_t *context, float &value, const ...
function get_current_limit_param (line 411) | bool get_current_limit_param(scpi_t *context, float &value, const ...
function get_power_limit_param (line 420) | bool get_power_limit_param(scpi_t *context, float &value, const Ch...
function get_voltage_limit_from_param (line 429) | bool get_voltage_limit_from_param(scpi_t *context, const scpi_numb...
function get_current_limit_from_param (line 466) | bool get_current_limit_from_param(scpi_t *context, const scpi_numb...
function get_power_limit_from_param (line 502) | bool get_power_limit_from_param(scpi_t *context, const scpi_number...
function scpi_result_t (line 535) | scpi_result_t result_float(scpi_t *context, Channel *channel, floa...
function get_profile_location_param (line 548) | bool get_profile_location_param(scpi_t * context, int &location, b...
function outputOnTime (line 564) | void outputOnTime(scpi_t* context, uint32_t time) {
function checkPassword (line 570) | bool checkPassword(scpi_t *context, const char *againstPassword) {
function cleanupPath (line 589) | void cleanupPath(char *filePath) {
function getFilePath (line 647) | bool getFilePath(scpi_t *context, char *filePath, bool mandatory) {
FILE: eez_psu_sketch/scpi_params.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/scpi_psu.cpp
type eez (line 34) | namespace eez {
type psu (line 35) | namespace psu {
type scpi (line 36) | namespace scpi {
function init (line 70) | void init(scpi_t &scpi_context,
function emptyBuffer (line 92) | void emptyBuffer(scpi_t &context) {
function onBufferOverrun (line 96) | void onBufferOverrun(scpi_t &context) {
function input (line 103) | void input(scpi_t &context, const char *str, size_t size) {
function printError (line 129) | void printError(int_fast16_t err) {
function resultChoiceName (line 152) | void resultChoiceName(scpi_t *context, scpi_choice_def_t *choice, ...
function resetContext (line 171) | void resetContext(scpi_t *context) {
FILE: eez_psu_sketch/scpi_psu.h
function namespace (line 24) | namespace eez {
FILE: eez_psu_sketch/scpi_regs.cpp
type eez (line 22) | namespace eez {
type psu (line 23) | namespace psu {
type scpi (line 24) | namespace scpi {
function psu_reg_update (line 31) | static void psu_reg_update(scpi_t * context, scpi_psu_reg_name_t n...
function psu_reg_update_ieee488_reg (line 42) | static void psu_reg_update_ieee488_reg(scpi_t * context, scpi_reg_...
function psu_reg_set_bits (line 56) | void psu_reg_set_bits(scpi_t * context, scpi_psu_reg_name_t name, ...
function psu_reg_clear_bits (line 65) | void psu_reg_clear_bits(scpi_t * context, scpi_psu_reg_name_t name...
function psu_reg_update_psu_reg (line 76) | static void psu_reg_update_psu_reg(scpi_t * context, scpi_reg_val_...
function psu_reg_update_psu_reg (line 93) | static void psu_reg_update_psu_reg(scpi_t * context, scpi_reg_val_...
function scpi_reg_val_t (line 108) | scpi_reg_val_t reg_get(scpi_t * context, scpi_psu_reg_name_t name) {
function reg_set (line 123) | void reg_set(scpi_t *context, scpi_psu_reg_name_t name, scpi_reg_v...
function reg_get_ques_isum_bit_mask_for_channel_protection_value (line 200) | int reg_get_ques_isum_bit_mask_for_channel_protection_value(Channe...
function reg_set_ques_bit (line 208) | void reg_set_ques_bit(scpi_t *context, int bit_mask, bool on) {
function reg_set_ques_isum_bit (line 226) | void reg_set_ques_isum_bit(scpi_t *context, Channel *channel, int ...
function reg_set_oper_bit (line 246) | void reg_set_oper_bit(scpi_t *context, int bit_mask, bool on) {
function reg_set_oper_isum_bit (line 264) | void reg_set_oper_isum_bit(scpi_t *context, Channel *channel, int ...
FILE: eez_psu_sketch/scpi_regs.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/scpi_sense.cpp
type eez (line 24) | namespace eez {
type psu (line 25) | namespace psu {
type scpi (line 26) | namespace scpi {
function scpi_result_t (line 30) | scpi_result_t scpi_cmd_senseCurrentDcRangeUpper(scpi_t * context) {
function scpi_result_t (line 88) | scpi_result_t scpi_cmd_senseCurrentDcRangeUpperQ(scpi_t *context) {
function scpi_result_t (line 117) | scpi_result_t scpi_cmd_senseCurrentDcRangeAuto(scpi_t *context) {
function scpi_result_t (line 143) | scpi_result_t scpi_cmd_senseCurrentDcRangeAutoQ(scpi_t * context) {
FILE: eez_psu_sketch/scpi_simu.cpp
type eez (line 32) | namespace eez {
type psu (line 33) | namespace psu {
type scpi (line 37) | namespace scpi {
function get_resistance_from_param (line 41) | bool get_resistance_from_param(scpi_t *context, const scpi_number_...
function get_resistance_param (line 75) | static bool get_resistance_param(scpi_t *context, float &value) {
function scpi_result_t (line 86) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 102) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 113) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 129) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 164) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 190) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 209) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 225) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 236) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 262) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 283) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 299) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 334) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 348) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 354) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 358) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 369) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
function scpi_result_t (line 384) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 389) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 394) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 399) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 404) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 409) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 414) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 419) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 424) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 429) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 434) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 439) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 444) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 449) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 454) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 459) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 464) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
type scpi (line 382) | namespace scpi {
function get_resistance_from_param (line 41) | bool get_resistance_from_param(scpi_t *context, const scpi_number_...
function get_resistance_param (line 75) | static bool get_resistance_param(scpi_t *context, float &value) {
function scpi_result_t (line 86) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 102) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 113) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 129) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 164) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 190) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 209) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 225) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 236) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 262) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 283) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 299) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 334) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 348) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 354) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 358) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 369) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
function scpi_result_t (line 384) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 389) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 394) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 399) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 404) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 409) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 414) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 419) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 424) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 429) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 434) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 439) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 444) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 449) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 454) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 459) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 464) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
type psu (line 381) | namespace psu {
type scpi (line 37) | namespace scpi {
function get_resistance_from_param (line 41) | bool get_resistance_from_param(scpi_t *context, const scpi_number_...
function get_resistance_param (line 75) | static bool get_resistance_param(scpi_t *context, float &value) {
function scpi_result_t (line 86) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 102) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 113) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 129) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 164) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 190) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 209) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 225) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 236) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 262) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 283) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 299) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 334) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 348) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 354) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 358) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 369) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
function scpi_result_t (line 384) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 389) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 394) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 399) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 404) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 409) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 414) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 419) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 424) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 429) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 434) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 439) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 444) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 449) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 454) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 459) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 464) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
type scpi (line 382) | namespace scpi {
function get_resistance_from_param (line 41) | bool get_resistance_from_param(scpi_t *context, const scpi_number_...
function get_resistance_param (line 75) | static bool get_resistance_param(scpi_t *context, float &value) {
function scpi_result_t (line 86) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 102) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 113) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 129) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 164) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 190) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 209) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 225) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 236) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 262) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 283) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 299) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 334) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 348) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 354) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 358) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 369) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
function scpi_result_t (line 384) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 389) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 394) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 399) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 404) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 409) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 414) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 419) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 424) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 429) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 434) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 439) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 444) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 449) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 454) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 459) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 464) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
type eez (line 380) | namespace eez {
type psu (line 33) | namespace psu {
type scpi (line 37) | namespace scpi {
function get_resistance_from_param (line 41) | bool get_resistance_from_param(scpi_t *context, const scpi_number_...
function get_resistance_param (line 75) | static bool get_resistance_param(scpi_t *context, float &value) {
function scpi_result_t (line 86) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 102) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 113) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 129) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 164) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 190) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 209) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 225) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 236) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 262) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 283) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 299) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 334) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 348) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 354) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 358) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 369) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
function scpi_result_t (line 384) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 389) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 394) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 399) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 404) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 409) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 414) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 419) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 424) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 429) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 434) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 439) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 444) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 449) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 454) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 459) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 464) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
type scpi (line 382) | namespace scpi {
function get_resistance_from_param (line 41) | bool get_resistance_from_param(scpi_t *context, const scpi_number_...
function get_resistance_param (line 75) | static bool get_resistance_param(scpi_t *context, float &value) {
function scpi_result_t (line 86) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 102) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 113) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 129) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 164) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 190) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 209) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 225) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 236) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 262) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 283) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 299) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 334) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 348) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 354) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 358) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 369) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
function scpi_result_t (line 384) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 389) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 394) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 399) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 404) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 409) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 414) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 419) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 424) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 429) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 434) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 439) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 444) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 449) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 454) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 459) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 464) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
type psu (line 381) | namespace psu {
type scpi (line 37) | namespace scpi {
function get_resistance_from_param (line 41) | bool get_resistance_from_param(scpi_t *context, const scpi_number_...
function get_resistance_param (line 75) | static bool get_resistance_param(scpi_t *context, float &value) {
function scpi_result_t (line 86) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 102) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 113) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 129) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 164) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 190) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 209) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 225) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 236) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 262) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 283) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 299) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 334) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 348) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 354) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 358) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 369) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
function scpi_result_t (line 384) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 389) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 394) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 399) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 404) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 409) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 414) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 419) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 424) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 429) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 434) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 439) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 444) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 449) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 454) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 459) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 464) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
type scpi (line 382) | namespace scpi {
function get_resistance_from_param (line 41) | bool get_resistance_from_param(scpi_t *context, const scpi_number_...
function get_resistance_param (line 75) | static bool get_resistance_param(scpi_t *context, float &value) {
function scpi_result_t (line 86) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 102) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 113) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 129) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 164) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 190) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 209) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 225) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 236) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 262) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 283) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 299) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 334) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 348) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 354) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 358) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 369) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
function scpi_result_t (line 384) | scpi_result_t scpi_cmd_simulatorLoadState(scpi_t *context) {
function scpi_result_t (line 389) | scpi_result_t scpi_cmd_simulatorLoadStateQ(scpi_t * context) {
function scpi_result_t (line 394) | scpi_result_t scpi_cmd_simulatorLoad(scpi_t *context) {
function scpi_result_t (line 399) | scpi_result_t scpi_cmd_simulatorLoadQ(scpi_t *context) {
function scpi_result_t (line 404) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternal(scpi_t *con...
function scpi_result_t (line 409) | scpi_result_t scpi_cmd_simulatorVoltageProgramExternalQ(scpi_t *co...
function scpi_result_t (line 414) | scpi_result_t scpi_cmd_simulatorPwrgood(scpi_t *context) {
function scpi_result_t (line 419) | scpi_result_t scpi_cmd_simulatorPwrgoodQ(scpi_t *context) {
function scpi_result_t (line 424) | scpi_result_t scpi_cmd_simulatorRpol(scpi_t *context) {
function scpi_result_t (line 429) | scpi_result_t scpi_cmd_simulatorRpolQ(scpi_t *context) {
function scpi_result_t (line 434) | scpi_result_t scpi_cmd_simulatorTemperature(scpi_t *context) {
function scpi_result_t (line 439) | scpi_result_t scpi_cmd_simulatorTemperatureQ(scpi_t *context) {
function scpi_result_t (line 444) | scpi_result_t scpi_cmd_simulatorGui(scpi_t *context) {
function scpi_result_t (line 449) | scpi_result_t scpi_cmd_simulatorExit(scpi_t *context) {
function scpi_result_t (line 454) | scpi_result_t scpi_cmd_simulatorQuit(scpi_t *context) {
function scpi_result_t (line 459) | scpi_result_t scpi_cmd_simulatorPin1(scpi_t *context) {
function scpi_result_t (line 464) | scpi_result_t scpi_cmd_simulatorPin1Q(scpi_t * context) {
FILE: eez_psu_sketch/scpi_sour.cpp
type eez (line 32) | namespace eez {
type psu (line 33) | namespace psu {
type scpi (line 34) | namespace scpi {
function scpi_result_t (line 38) | static scpi_result_t set_step(scpi_t * context, Channel::Value *cv...
function scpi_result_t (line 75) | static scpi_result_t get_source_value(scpi_t *context, Channel &ch...
function scpi_result_t (line 101) | static scpi_result_t get_source_value(scpi_t *context, Channel &ch...
function scpi_result_t (line 121) | scpi_result_t get_delay(scpi_t *context, float delay) {
function scpi_result_t (line 127) | scpi_result_t get_state(scpi_t *context, Channel *channel, int typ...
function scpi_result_t (line 137) | scpi_result_t get_tripped(scpi_t *context, Channel::ProtectionValu...
function scpi_result_t (line 145) | scpi_result_t scpi_cmd_sourceCurrentLevelImmediateAmplitude(scpi_t...
function scpi_result_t (line 176) | scpi_result_t scpi_cmd_sourceCurrentLevelImmediateAmplitudeQ(scpi_...
function scpi_result_t (line 191) | scpi_result_t scpi_cmd_sourceVoltageLevelImmediateAmplitude(scpi_t...
function scpi_result_t (line 227) | scpi_result_t scpi_cmd_sourceVoltageLevelImmediateAmplitudeQ(scpi_...
function scpi_result_t (line 251) | scpi_result_t scpi_cmd_sourceCurrentLevelImmediateStepIncrement(sc...
function scpi_result_t (line 260) | scpi_result_t scpi_cmd_sourceCurrentLevelImmediateStepIncrementQ(s...
function scpi_result_t (line 269) | scpi_result_t scpi_cmd_sourceVoltageLevelImmediateStepIncrement(sc...
function scpi_result_t (line 278) | scpi_result_t scpi_cmd_sourceVoltageLevelImmediateStepIncrementQ(s...
function scpi_result_t (line 289) | scpi_result_t scpi_cmd_sourceCurrentProtectionDelayTime(scpi_t * c...
function scpi_result_t (line 307) | scpi_result_t scpi_cmd_sourceCurrentProtectionDelayTimeQ(scpi_t * ...
function scpi_result_t (line 316) | scpi_result_t scpi_cmd_sourceCurrentProtectionState(scpi_t *contex...
function scpi_result_t (line 332) | scpi_result_t scpi_cmd_sourceCurrentProtectionStateQ(scpi_t * cont...
function scpi_result_t (line 341) | scpi_result_t scpi_cmd_sourceCurrentProtectionTrippedQ(scpi_t * co...
function scpi_result_t (line 350) | scpi_result_t scpi_cmd_sourcePowerProtectionLevel(scpi_t * context) {
function scpi_result_t (line 367) | scpi_result_t scpi_cmd_sourcePowerProtectionLevelQ(scpi_t * contex...
function scpi_result_t (line 379) | scpi_result_t scpi_cmd_sourcePowerProtectionDelayTime(scpi_t * con...
function scpi_result_t (line 397) | scpi_result_t scpi_cmd_sourcePowerProtectionDelayTimeQ(scpi_t * co...
function scpi_result_t (line 406) | scpi_result_t scpi_cmd_sourcePowerProtectionState(scpi_t * context) {
function scpi_result_t (line 422) | scpi_result_t scpi_cmd_sourcePowerProtectionStateQ(scpi_t * contex...
function scpi_result_t (line 431) | scpi_result_t scpi_cmd_sourcePowerProtectionTrippedQ(scpi_t * cont...
function scpi_result_t (line 440) | scpi_result_t scpi_cmd_sourceVoltageProtectionLevel(scpi_t * conte...
function scpi_result_t (line 457) | scpi_result_t scpi_cmd_sourceVoltageProtectionLevelQ(scpi_t * cont...
function scpi_result_t (line 469) | scpi_result_t scpi_cmd_sourceVoltageProtectionDelayTime(scpi_t * c...
function scpi_result_t (line 487) | scpi_result_t scpi_cmd_sourceVoltageProtectionDelayTimeQ(scpi_t * ...
function scpi_result_t (line 496) | scpi_result_t scpi_cmd_sourceVoltageProtectionState(scpi_t * conte...
function scpi_result_t (line 512) | scpi_result_t scpi_cmd_sourceVoltageProtectionStateQ(scpi_t * cont...
function scpi_result_t (line 521) | scpi_result_t scpi_cmd_sourceVoltageProtectionTrippedQ(scpi_t * co...
function scpi_result_t (line 530) | scpi_result_t scpi_cmd_sourceVoltageSenseSource(scpi_t * context) {
function scpi_result_t (line 556) | scpi_result_t scpi_cmd_sourceVoltageSenseSourceQ(scpi_t * context) {
function scpi_result_t (line 577) | scpi_result_t scpi_cmd_sourceVoltageProgramSource(scpi_t * context) {
function scpi_result_t (line 608) | scpi_result_t scpi_cmd_sourceVoltageProgramSourceQ(scpi_t * contex...
function scpi_result_t (line 634) | scpi_result_t scpi_cmd_sourceLripple(scpi_t * context) {
function scpi_result_t (line 663) | scpi_result_t scpi_cmd_sourceLrippleQ(scpi_t * context) {
function scpi_result_t (line 684) | scpi_result_t scpi_cmd_sourceLrippleAuto(scpi_t * context) {
function scpi_result_t (line 710) | scpi_result_t scpi_cmd_sourceLrippleAutoQ(scpi_t * context) {
function scpi_result_t (line 731) | scpi_result_t scpi_cmd_sourceCurrentLimitPositiveImmediateAmplitud...
function scpi_result_t (line 747) | scpi_result_t scpi_cmd_sourceCurrentLimitPositiveImmediateAmplitud...
function scpi_result_t (line 762) | scpi_result_t scpi_cmd_sourceVoltageLimitPositiveImmediateAmplitud...
function scpi_result_t (line 778) | scpi_result_t scpi_cmd_sourceVoltageLimitPositiveImmediateAmplitud...
function scpi_result_t (line 793) | scpi_result_t scpi_cmd_sourcePowerLimit(scpi_t * context) {
function scpi_result_t (line 809) | scpi_result_t scpi_cmd_sourcePowerLimitQ(scpi_t * context) {
function scpi_result_t (line 826) | scpi_result_t scpi_cmd_sourceCurrentLevelTriggeredAmplitude(scpi_t...
function scpi_result_t (line 843) | scpi_result_t scpi_cmd_sourceCurrentLevelTriggeredAmplitudeQ(scpi_...
function scpi_result_t (line 858) | scpi_result_t scpi_cmd_sourceVoltageLevelTriggeredAmplitude(scpi_t...
function scpi_result_t (line 875) | scpi_result_t scpi_cmd_sourceVoltageLevelTriggeredAmplitudeQ(scpi_...
function scpi_result_t (line 897) | scpi_result_t scpi_cmd_sourceCurrentMode(scpi_t *context) {
function scpi_result_t (line 919) | scpi_result_t scpi_cmd_sourceCurrentModeQ(scpi_t *context) {
function scpi_result_t (line 930) | scpi_result_t scpi_cmd_sourceVoltageMode(scpi_t *context) {
function scpi_result_t (line 952) | scpi_result_t scpi_cmd_sourceVoltageModeQ(scpi_t *context) {
function scpi_result_t (line 963) | scpi_result_t scpi_cmd_sourceListCount(scpi_t *context) {
function scpi_result_t (line 1009) | scpi_result_t scpi_cmd_sourceListCountQ(scpi_t *context) {
function scpi_result_t (line 1020) | scpi_result_t scpi_cmd_sourceListCurrentLevel(scpi_t *context) {
function scpi_result_t (line 1081) | scpi_result_t scpi_cmd_sourceListCurrentLevelQ(scpi_t *context) {
function scpi_result_t (line 1094) | scpi_result_t scpi_cmd_sourceListDwell(scpi_t *context) {
function scpi_result_t (line 1140) | scpi_result_t scpi_cmd_sourceListDwellQ(scpi_t *context) {
function scpi_result_t (line 1153) | scpi_result_t scpi_cmd_sourceListVoltageLevel(scpi_t *context) {
function scpi_result_t (line 1214) | scpi_result_t scpi_cmd_sourceListVoltageLevelQ(scpi_t *context) {
FILE: eez_psu_sketch/scpi_stat.cpp
type eez (line 22) | namespace eez {
type psu (line 23) | namespace psu {
type scpi (line 24) | namespace scpi {
function scpi_result_t (line 28) | scpi_result_t scpi_cmd_statusQuestionableEventQ(scpi_t * context) {
function scpi_result_t (line 38) | scpi_result_t scpi_cmd_statusQuestionableConditionQ(scpi_t * conte...
function scpi_result_t (line 45) | scpi_result_t scpi_cmd_statusQuestionableEnable(scpi_t * context) {
function scpi_result_t (line 54) | scpi_result_t scpi_cmd_statusQuestionableEnableQ(scpi_t * context) {
function scpi_result_t (line 62) | scpi_result_t scpi_cmd_statusOperationEventQ(scpi_t * context) {
function scpi_result_t (line 72) | scpi_result_t scpi_cmd_statusOperationConditionQ(scpi_t * context) {
function scpi_result_t (line 79) | scpi_result_t scpi_cmd_statusOperationEnable(scpi_t * context) {
function scpi_result_t (line 88) | scpi_result_t scpi_cmd_statusOperationEnableQ(scpi_t * context) {
function scpi_result_t (line 95) | scpi_result_t scpi_cmd_statusQuestionableInstrumentEventQ(scpi_t *...
function scpi_result_t (line 105) | scpi_result_t scpi_cmd_statusQuestionableInstrumentConditionQ(scpi...
function scpi_result_t (line 112) | scpi_result_t scpi_cmd_statusQuestionableInstrumentEnable(scpi_t *...
function scpi_result_t (line 121) | scpi_result_t scpi_cmd_statusQuestionableInstrumentEnableQ(scpi_t ...
function scpi_result_t (line 128) | scpi_result_t scpi_cmd_statusOperationInstrumentEventQ(scpi_t * co...
function scpi_result_t (line 138) | scpi_result_t scpi_cmd_statusOperationInstrumentConditionQ(scpi_t ...
function scpi_result_t (line 145) | scpi_result_t scpi_cmd_statusOperationInstrumentEnable(scpi_t * co...
function scpi_result_t (line 154) | scpi_result_t scpi_cmd_statusOperationInstrumentEnableQ(scpi_t * c...
function scpi_result_t (line 161) | scpi_result_t scpi_cmd_statusQuestionableInstrumentIsummaryEventQ(...
function scpi_result_t (line 182) | scpi_result_t scpi_cmd_statusQuestionableInstrumentIsummaryConditi...
function scpi_result_t (line 200) | scpi_result_t scpi_cmd_statusQuestionableInstrumentIsummaryEnable(...
function scpi_result_t (line 220) | scpi_result_t scpi_cmd_statusQuestionableInstrumentIsummaryEnableQ...
function scpi_result_t (line 238) | scpi_result_t scpi_cmd_statusOperationInstrumentIsummaryEventQ(scp...
function scpi_result_t (line 259) | scpi_result_t scpi_cmd_statusOperationInstrumentIsummaryConditionQ...
function scpi_result_t (line 277) | scpi_result_t scpi_cmd_statusOperationInstrumentIsummaryEnable(scp...
function scpi_result_t (line 297) | scpi_result_t scpi_cmd_statusOperationInstrumentIsummaryEnableQ(sc...
function scpi_result_t (line 315) | scpi_result_t scpi_cmd_statusPreset(scpi_t * context) {
FILE: eez_psu_sketch/scpi_syst.cpp
type eez (line 36) | namespace eez {
type psu (line 37) | namespace psu {
type scpi (line 38) | namespace scpi {
function scpi_result_t (line 42) | scpi_result_t scpi_cmd_systemCapabilityQ(scpi_t *context) {
function scpi_result_t (line 50) | scpi_result_t scpi_cmd_systemErrorNextQ(scpi_t *context) {
function scpi_result_t (line 54) | scpi_result_t scpi_cmd_systemErrorCountQ(scpi_t *context) {
function scpi_result_t (line 58) | scpi_result_t scpi_cmd_systemVersionQ(scpi_t *context) {
function scpi_result_t (line 62) | scpi_result_t scpi_cmd_systemPower(scpi_t *context) {
function scpi_result_t (line 83) | scpi_result_t scpi_cmd_systemPowerQ(scpi_t *context) {
function scpi_result_t (line 88) | scpi_result_t scpi_cmd_systemDate(scpi_t *context) {
function scpi_result_t (line 123) | scpi_result_t scpi_cmd_systemDateClear(scpi_t *context) {
function scpi_result_t (line 129) | scpi_result_t scpi_cmd_systemDateQ(scpi_t *context) {
function scpi_result_t (line 143) | scpi_result_t scpi_cmd_systemTime(scpi_t *context) {
function scpi_result_t (line 172) | scpi_result_t scpi_cmd_systemTimeClear(scpi_t *context) {
function scpi_result_t (line 178) | scpi_result_t scpi_cmd_systemTimeQ(scpi_t *context) {
function scpi_result_t (line 201) | scpi_result_t scpi_cmd_systemTimeDst(scpi_t *context) {
function scpi_result_t (line 217) | scpi_result_t scpi_cmd_systemTimeDstQ(scpi_t *context) {
function scpi_result_t (line 222) | scpi_result_t scpi_cmd_systemTimeZone(scpi_t *context) {
function scpi_result_t (line 246) | scpi_result_t scpi_cmd_systemTimeZoneQ(scpi_t *context) {
function scpi_result_t (line 253) | scpi_result_t scpi_cmd_systemBeeperImmediate(scpi_t *context) {
function scpi_result_t (line 258) | scpi_result_t scpi_cmd_systemBeeperState(scpi_t *context) {
function scpi_result_t (line 274) | scpi_result_t scpi_cmd_systemBeeperStateQ(scpi_t *context) {
function scpi_result_t (line 279) | scpi_result_t scpi_cmd_systemBeeperKeyState(scpi_t *context) {
function scpi_result_t (line 295) | scpi_result_t scpi_cmd_systemBeeperKeyStateQ(scpi_t *context) {
function scpi_result_t (line 300) | scpi_result_t scpi_cmd_systemTemperatureProtectionHighClear(scpi_t...
function scpi_result_t (line 311) | scpi_result_t scpi_cmd_systemTemperatureProtectionHighLevel(scpi_t...
function scpi_result_t (line 328) | scpi_result_t scpi_cmd_systemTemperatureProtectionHighLevelQ(scpi_...
function scpi_result_t (line 337) | scpi_result_t scpi_cmd_systemTemperatureProtectionHighState(scpi_t...
function scpi_result_t (line 354) | scpi_result_t scpi_cmd_systemTemperatureProtectionHighStateQ(scpi_...
function scpi_result_t (line 365) | scpi_result_t scpi_cmd_systemTemperatureProtectionHighDelayTime(sc...
function scpi_result_t (line 382) | scpi_result_t scpi_cmd_systemTemperatureProtectionHighDelayTimeQ(s...
function scpi_result_t (line 393) | scpi_result_t scpi_cmd_systemTemperatureProtectionHighTrippedQ(scp...
function scpi_result_t (line 404) | scpi_result_t scpi_cmd_systemChannelCountQ(scpi_t *context) {
function scpi_result_t (line 410) | scpi_result_t scpi_cmd_systemChannelInformationCurrentQ(scpi_t *co...
function scpi_result_t (line 421) | scpi_result_t scpi_cmd_systemChannelInformationPowerQ(scpi_t *cont...
function scpi_result_t (line 432) | scpi_result_t scpi_cmd_systemChannelInformationProgramQ(scpi_t *co...
function scpi_result_t (line 500) | scpi_result_t scpi_cmd_systemChannelInformationVoltageQ(scpi_t *co...
function scpi_result_t (line 511) | scpi_result_t scpi_cmd_systemChannelInformationOntimeTotalQ(scpi_t...
function scpi_result_t (line 522) | scpi_result_t scpi_cmd_systemChannelInformationOntimeLastQ(scpi_t ...
function scpi_result_t (line 533) | scpi_result_t scpi_cmd_systemChannelModelQ(scpi_t *context) {
function scpi_result_t (line 544) | scpi_result_t scpi_cmd_systemCpuInformationEthernetTypeQ(scpi_t *c...
function scpi_result_t (line 549) | scpi_result_t scpi_cmd_systemCpuInformationTypeQ(scpi_t *context) {
function scpi_result_t (line 554) | scpi_result_t scpi_cmd_systemCpuInformationOntimeTotalQ(scpi_t *co...
function scpi_result_t (line 559) | scpi_result_t scpi_cmd_systemCpuInformationOntimeLastQ(scpi_t *con...
function scpi_result_t (line 564) | scpi_result_t scpi_cmd_systemCpuModelQ(scpi_t *context) {
function scpi_result_t (line 569) | scpi_result_t scpi_cmd_systemCpuOptionQ(scpi_t *context) {
function scpi_result_t (line 626) | scpi_result_t scpi_cmd_systemSerial(scpi_t *context) {
function scpi_result_t (line 648) | scpi_result_t scpi_cmd_systemSerialQ(scpi_t *context) {
function scpi_result_t (line 653) | scpi_result_t scpi_cmd_systemPowerProtectionTrip(scpi_t *context) {
function scpi_result_t (line 667) | scpi_result_t scpi_cmd_systemPowerProtectionTripQ(scpi_t *context) {
function scpi_result_t (line 673) | scpi_result_t scpi_cmd_systemPonOutputDisable(scpi_t *context) {
function scpi_result_t (line 687) | scpi_result_t scpi_cmd_systemPonOutputDisableQ(scpi_t *context) {
function scpi_result_t (line 693) | scpi_result_t scpi_cmd_systemPasswordNew(scpi_t *context) {
function scpi_result_t (line 719) | scpi_result_t scpi_cmd_systemPasswordFpanelReset(scpi_t *context) {
function scpi_result_t (line 728) | scpi_result_t scpi_cmd_systemPasswordCalibrationReset(scpi_t *cont...
function scpi_result_t (line 737) | scpi_result_t scpi_cmd_systemKlock(scpi_t *context) {
function scpi_result_t (line 758) | scpi_result_t scpi_cmd_systemCommunicateRlstate(scpi_t *context) {
function scpi_result_t (line 773) | scpi_result_t scpi_cmd_systemCommunicateRlstateQ(scpi_t *context) {
function scpi_result_t (line 778) | scpi_result_t scpi_cmd_systemLocal(scpi_t *context) {
function scpi_result_t (line 788) | scpi_result_t scpi_cmd_systemRemote(scpi_t *context) {
function scpi_result_t (line 798) | scpi_result_t scpi_cmd_systemRwlock(scpi_t *context) {
function scpi_result_t (line 808) | scpi_result_t scpi_cmd_systemCommunicateSerialBaud(scpi_t *context) {
function scpi_result_t (line 828) | scpi_result_t scpi_cmd_systemCommunicateSerialBaudQ(scpi_t *contex...
function scpi_result_t (line 843) | scpi_result_t scpi_cmd_systemCommunicateSerialParity(scpi_t *conte...
function scpi_result_t (line 857) | scpi_result_t scpi_cmd_systemCommunicateSerialParityQ(scpi_t *cont...
function scpi_result_t (line 871) | scpi_result_t scpi_cmd_systemCommunicateEnable(scpi_t *context) {
function scpi_result_t (line 898) | scpi_result_t scpi_cmd_systemCommunicateEnableQ(scpi_t *context) {
function scpi_result_t (line 920) | scpi_result_t scpi_cmd_systemCommunicateEthernetDhcp(scpi_t *conte...
function scpi_result_t (line 941) | scpi_result_t scpi_cmd_systemCommunicateEthernetDhcpQ(scpi_t *cont...
function scpi_result_t (line 956) | scpi_result_t scpi_cmd_systemCommunicateEthernetAddress(scpi_t *co...
function scpi_result_t (line 985) | scpi_result_t scpi_cmd_systemCommunicateEthernetAddressQ(scpi_t *c...
function scpi_result_t (line 1006) | scpi_result_t scpi_cmd_systemCommunicateEthernetDns(scpi_t *contex...
function scpi_result_t (line 1035) | scpi_result_t scpi_cmd_systemCommunicateEthernetDnsQ(scpi_t *conte...
function scpi_result_t (line 1056) | scpi_result_t scpi_cmd_systemCommunicateEthernetGateway(scpi_t *co...
function scpi_result_t (line 1085) | scpi_result_t scpi_cmd_systemCommunicateEthernetGatewayQ(scpi_t *c...
function scpi_result_t (line 1106) | scpi_result_t scpi_cmd_systemCommunicateEthernetSmask(scpi_t *cont...
function scpi_result_t (line 1135) | scpi_result_t scpi_cmd_systemCommunicateEthernetSmaskQ(scpi_t *con...
function scpi_result_t (line 1156) | scpi_result_t scpi_cmd_systemCommunicateEthernetPort(scpi_t *conte...
function scpi_result_t (line 1182) | scpi_result_t scpi_cmd_systemCommunicateEthernetPortQ(scpi_t *cont...
function scpi_result_t (line 1197) | scpi_result_t scpi_cmd_systemCommunicateEthernetMac(scpi_t *contex...
function scpi_result_t (line 1226) | scpi_result_t scpi_cmd_systemCommunicateEthernetMacQ(scpi_t *conte...
function scpi_result_t (line 1238) | scpi_result_t scpi_cmd_systemCommunicateNtp(scpi_t *context) {
function scpi_result_t (line 1264) | scpi_result_t scpi_cmd_systemCommunicateNtpQ(scpi_t *context) {
function scpi_result_t (line 1274) | scpi_result_t scpi_cmd_systemInhibitQ(scpi_t * context) {
function scpi_result_t (line 1279) | scpi_result_t scpi_cmd_systemDigitalInputDataQ(scpi_t *context) {
function scpi_result_t (line 1306) | scpi_result_t scpi_cmd_systemDigitalOutputData(scpi_t *context) {
function scpi_result_t (line 1338) | scpi_result_t scpi_cmd_systemDigitalOutputDataQ(scpi_t *context) {
function scpi_result_t (line 1378) | scpi_result_t scpi_cmd_systemDigitalPinFunction(scpi_t *context) {
function scpi_result_t (line 1417) | scpi_result_t scpi_cmd_systemDigitalPinFunctionQ(scpi_t *context) {
function scpi_result_t (line 1442) | scpi_result_t scpi_cmd_systemDigitalPinPolarity(scpi_t *context) {
function scpi_result_t (line 1468) | scpi_result_t scpi_cmd_systemDigitalPinPolarityQ(scpi_t *context) {
FILE: eez_psu_sketch/scpi_trigger.cpp
type eez (line 30) | namespace eez {
type psu (line 31) | namespace psu {
type scpi (line 32) | namespace scpi {
function scpi_result_t (line 46) | scpi_result_t scpi_cmd_triggerSequenceImmediate(scpi_t * context) {
function scpi_result_t (line 56) | scpi_result_t scpi_cmd_triggerSequenceDelay(scpi_t * context) {
function scpi_result_t (line 68) | scpi_result_t scpi_cmd_triggerSequenceDelayQ(scpi_t * context) {
function scpi_result_t (line 73) | scpi_result_t scpi_cmd_triggerSequenceSource(scpi_t * context) {
function scpi_result_t (line 90) | scpi_result_t scpi_cmd_triggerSequenceSourceQ(scpi_t * context) {
function scpi_result_t (line 103) | scpi_result_t scpi_cmd_triggerSequenceExitCondition(scpi_t * conte...
function scpi_result_t (line 125) | scpi_result_t scpi_cmd_triggerSequenceExitConditionQ(scpi_t * cont...
function scpi_result_t (line 136) | scpi_result_t scpi_cmd_initiateImmediate(scpi_t * context) {
function scpi_result_t (line 146) | scpi_result_t scpi_cmd_initiateContinuous(scpi_t * context) {
function scpi_result_t (line 164) | scpi_result_t scpi_cmd_initiateContinuousQ(scpi_t * context) {
function scpi_result_t (line 169) | scpi_result_t scpi_cmd_abort(scpi_t * context) {
function scpi_result_t (line 175) | scpi_result_t scpi_cmd_coreTrg(scpi_t * context) {
function scpi_result_t (line 184) | scpi_result_t scpi_cmd_triggerDlogImmediate(scpi_t * context) {
function scpi_result_t (line 198) | scpi_result_t scpi_cmd_triggerDlogSource(scpi_t * context) {
function scpi_result_t (line 218) | scpi_result_t scpi_cmd_triggerDlogSourceQ(scpi_t * context) {
FILE: eez_psu_sketch/sd_card.cpp
type eez (line 35) | namespace eez {
type psu (line 36) | namespace psu {
type sd_card (line 37) | namespace sd_card {
function dateTime (line 43) | void dateTime(uint16_t* date, uint16_t* time) {
function init (line 57) | void init() {
function test (line 87) | bool test() {
function dumpInfo (line 91) | void dumpInfo(char *buffer) {
function isSpace (line 151) | bool isSpace(int c) {
function matchZeroOrMoreSpaces (line 156) | void matchZeroOrMoreSpaces(File &file) {
function match (line 166) | bool match(File& file, char c) {
function match (line 175) | bool match(File& file, float &result) {
function makeParentDir (line 234) | bool makeParentDir(const char *filePath) {
function exists (line 240) | bool exists(const char *dirPath, int *err) {
function catalog (line 254) | bool catalog(const char *dirPath, void *param, void (*callback)(vo...
function catalogLength (line 290) | bool catalogLength(const char *dirPath, size_t *length, int *err) {
function upload (line 318) | bool upload(const char *filePath, void *param, void (*callback)(vo...
function download (line 379) | bool download(const char *filePath, bool truncate, const void *buf...
function moveFile (line 413) | bool moveFile(const char *sourcePath, const char *destinationPath,...
function copyFile (line 432) | bool copyFile(const char *sourcePath, const char *destinationPath,...
function deleteFile (line 515) | bool deleteFile(const char *filePath, int *err) {
function makeDir (line 534) | bool makeDir(const char *dirPath, int *err) {
function removeDir (line 548) | bool removeDir(const char *dirPath, int *err) {
function getDateTime (line 562) | void getDateTime(
function getDate (line 592) | bool getDate(const char *filePath, uint8_t &year, uint8_t &month, ...
function getTime (line 619) | bool getTime(const char *filePath, uint8_t &hour, uint8_t &minute,...
function getInfo (line 651) | bool getInfo(uint64_t &usedSpace, uint64_t &freeSpace) {
FILE: eez_psu_sketch/sd_card.h
function namespace (line 25) | namespace eez {
FILE: eez_psu_sketch/serial_psu.cpp
type eez (line 24) | namespace eez {
type psu (line 25) | namespace psu {
type serial (line 29) | namespace serial {
function SCPI_Write (line 36) | size_t SCPI_Write(scpi_t *context, const char * data, size_t len) {
function scpi_result_t (line 50) | scpi_result_t SCPI_Flush(scpi_t *context) {
function SCPI_Error (line 54) | int SCPI_Error(scpi_t *context, int_fast16_t err) {
function scpi_result_t (line 66) | scpi_result_t SCPI_Control(scpi_t *context, scpi_ctrl_name_t ctrl,...
function scpi_result_t (line 81) | scpi_result_t SCPI_Reset(scpi_t *context) {
function getConfig (line 113) | UARTClass::UARTModes getConfig() {
function init (line 125) | void init() {
function tick (line 161) | void tick(uint32_t tick_usec) {
function isConnected (line 188) | bool isConnected() {
function update (line 192) | void update() {
FILE: eez_psu_sketch/serial_psu.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/sound.cpp
type eez (line 113) | namespace eez {
type psu (line 114) | namespace psu {
type sound (line 115) | namespace sound {
function play_tune (line 139) | static void play_tune(int *tune) {
function tick (line 155) | void tick(uint32_t tick_usec) {
function playPowerUp (line 166) | void playPowerUp() {
function playPowerDown (line 172) | void playPowerDown() {
function playBeep (line 181) | void playBeep(bool force) {
function playClick (line 191) | void playClick() {
FILE: eez_psu_sketch/sound.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/temp_sensor.cpp
type eez (line 23) | namespace eez {
type psu (line 24) | namespace psu {
type temp_sensor (line 28) | namespace temp_sensor {
FILE: eez_psu_sketch/temp_sensor.h
function namespace (line 36) | namespace eez {
FILE: eez_psu_sketch/temperature.cpp
type eez (line 34) | namespace eez {
type psu (line 35) | namespace psu {
type temperature (line 36) | namespace temperature {
function init (line 54) | void init() {
function test (line 60) | bool test() {
function tick (line 70) | void tick(uint32_t tick_usec) {
function isChannelSensorInstalled (line 112) | bool isChannelSensorInstalled(Channel *channel) {
function getChannelSensorState (line 121) | bool getChannelSensorState(Channel *channel) {
function getChannelSensorLevel (line 125) | float getChannelSensorLevel(Channel *channel) {
function getChannelSensorDelay (line 129) | float getChannelSensorDelay(Channel *channel) {
function isAnySensorTripped (line 134) | bool isAnySensorTripped(Channel *channel) {
function clearChannelProtection (line 144) | void clearChannelProtection(Channel *channel) {
function disableChannelProtection (line 152) | void disableChannelProtection(Channel *channel) {
function getMaxChannelTemperature (line 160) | float getMaxChannelTemperature() {
function isAllowedToPowerUp (line 164) | bool isAllowedToPowerUp() {
FILE: eez_psu_sketch/temperature.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/timer.cpp
type eez (line 22) | namespace eez {
type psu (line 23) | namespace psu {
FILE: eez_psu_sketch/timer.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/touch.cpp
type eez (line 28) | namespace eez {
type psu (line 29) | namespace psu {
type gui (line 30) | namespace gui {
type touch (line 31) | namespace touch {
function touch_WriteData (line 60) | void touch_WriteData(byte data) {
function word (line 74) | word touch_ReadData() {
function touch_WriteData (line 86) | void touch_WriteData(byte data) {
function word (line 100) | word touch_ReadData() {
function touch_init (line 113) | void touch_init() {
function touch_read (line 143) | void touch_read() {
function touch_init (line 191) | void touch_init() {
function touch_read (line 194) | void touch_read() {
function touch_write (line 200) | void touch_write(bool is_pressed, int x, int y) {
function init (line 216) | void init() {
function tick (line 223) | void tick(uint32_t tick_usec) {
function directIsPressed (line 260) | bool directIsPressed() {
FILE: eez_psu_sketch/touch.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/touch_calibration.cpp
type eez (line 31) | namespace eez {
type psu (line 32) | namespace psu {
type gui (line 33) | namespace gui {
type touch (line 34) | namespace touch {
type calibration (line 35) | namespace calibration {
function draw_cross (line 71) | void draw_cross(int x, int y, uint16_t color) {
function draw_point (line 87) | void draw_point(int x, int y) {
function read_point (line 97) | bool read_point() {
function init (line 111) | void init() {
function startCalibration (line 136) | void startCalibration() {
function enterCalibrationMode (line 141) | void enterCalibrationMode(int yesNoPageId, int nextPageId) {
function leaveCalibrationMode (line 150) | void leaveCalibrationMode() {
function isCalibrated (line 161) | bool isCalibrated() {
function isCalibrating (line 165) | bool isCalibrating() {
function dialogYes (line 169) | void dialogYes() {
function dialogNo (line 183) | void dialogNo() {
function dialogCancel (line 187) | void dialogCancel() {
function startAgain (line 191) | void startAgain() {
function tick (line 195) | void tick(uint32_t tick_usec) {
FILE: eez_psu_sketch/touch_calibration.h
function namespace (line 23) | namespace eez {
FILE: eez_psu_sketch/touch_filter.cpp
type eez (line 44) | namespace eez {
type psu (line 45) | namespace psu {
type gui (line 46) | namespace gui {
type touch (line 47) | namespace touch {
type Point (line 49) | struct Point {
method Point (line 52) | Point() { }
method Point (line 53) | Point(int _x, int _y) : x(_x), y(_y) { }
type Sample (line 56) | struct Sample {
method Sample (line 60) | Sample() { }
method Sample (line 61) | Sample(const Point& _l, bool _p) : l(_l), p(_p) { }
class MedianFilter (line 64) | class MedianFilter {
method MedianFilter (line 66) | MedianFilter() {
method cmp_swap (line 94) | static inline void cmp_swap(int& a, int& b) {
class IIRFilter (line 103) | class IIRFilter {
method IIRFilter (line 105) | IIRFilter() : s(0) { }
class ChannelFilter (line 121) | class ChannelFilter {
class DebounceFilter (line 133) | class DebounceFilter {
method DebounceFilter (line 135) | DebounceFilter() : s(0) { }
method on (line 137) | bool on() const {
class SampleFilter (line 159) | class SampleFilter {
method Sample (line 161) | Sample operator()(const Sample& s) {
class ScreenTransform (line 177) | class ScreenTransform {
method ScreenTransform (line 179) | ScreenTransform() {
method calibrate (line 183) | bool calibrate(const Point& tl, const Point& br, const Point& ...
method reset (line 210) | void reset() {
method Point (line 218) | Point operator()(const Point& p) const {
method ch_scale (line 229) | int ch_scale(long adc_min, long adc_range, long dim, long x) c...
function calibrateTransform (line 256) | bool calibrateTransform(int tl_x, int tl_y, int br_x, int br_y, ...
function resetTransformCalibration (line 261) | void resetTransformCalibration() {
function filter (line 265) | bool filter(bool is_pressed, int& x, int& y) {
function transform (line 272) | void transform(int& x, int& y) {
FILE: eez_psu_sketch/touch_filter.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/trigger.cpp
type eez (line 32) | namespace eez {
type psu (line 33) | namespace psu {
type trigger (line 34) | namespace trigger {
type State (line 41) | enum State {
function setState (line 53) | void setState(State newState) {
function reset (line 73) | void reset() {
function extTrigInterruptHandler (line 83) | void extTrigInterruptHandler() {
function init (line 92) | void init() {
function setDelay (line 105) | void setDelay(float delay) {
function getDelay (line 109) | float getDelay() {
function setSource (line 113) | void setSource(Source source) {
function Source (line 117) | Source getSource() {
function setVoltage (line 121) | void setVoltage(Channel &channel, float value) {
function getVoltage (line 125) | float getVoltage(Channel &channel) {
function setCurrent (line 129) | void setCurrent(Channel &channel, float value) {
function getCurrent (line 133) | float getCurrent(Channel &channel) {
function check (line 137) | void check(uint32_t currentTime) {
function generateTrigger (line 143) | int generateTrigger(Source source, bool checkImmediatelly) {
function isTriggerFinished (line 178) | bool isTriggerFinished() {
function triggerFinished (line 187) | void triggerFinished() {
function onTriggerFinished (line 195) | void onTriggerFinished(Channel &channel) {
function setTriggerFinished (line 225) | void setTriggerFinished(Channel &channel) {
function checkTrigger (line 241) | int checkTrigger() {
function startImmediately (line 296) | int startImmediately() {
function initiate (line 336) | int initiate() {
function enableInitiateContinuous (line 349) | int enableInitiateContinuous(bool enable) {
function isContinuousInitializationEnabled (line 358) | bool isContinuousInitializationEnabled() {
function isIdle (line 362) | bool isIdle() {
function isInitiated (line 366) | bool isInitiated() {
function abort (line 370) | void abort() {
function tick (line 375) | void tick(uint32_t tick_usec) {
FILE: eez_psu_sketch/trigger.h
function namespace (line 21) | namespace eez {
FILE: eez_psu_sketch/util.cpp
type eez (line 23) | namespace eez {
type psu (line 24) | namespace psu {
type util (line 25) | namespace util {
function remap (line 27) | float remap(float x, float x1, float y1, float x2, float y2) {
function remapQuad (line 31) | float remapQuad(float x, float x1, float y1, float x2, float y2) {
function remapCubic (line 38) | float remapCubic(float x, float x1, float y1, float x2, float y2) {
function remapExp (line 45) | float remapExp(float x, float x1, float y1, float x2, float y2) {
function clamp (line 52) | float clamp(float x, float min, float max) {
function strcatInt (line 62) | void strcatInt(char *str, int value) {
function strcatInt32 (line 67) | void strcatInt32(char *str, int32_t value) {
function strcatUInt32 (line 72) | void strcatUInt32(char *str, uint32_t value) {
function strcatFloat (line 77) | void strcatFloat(char *str, float value, int numSignificantDecimal...
function strcatFloat (line 101) | void strcatFloat(char *str, float value, ValueType valueType, int ...
function strcatVoltage (line 109) | void strcatVoltage(char *str, float value, int numSignificantDecim...
function strcatCurrent (line 117) | void strcatCurrent(char *str, float value, int numSignificantDecim...
function strcatPower (line 128) | void strcatPower(char *str, float value) {
function strcatDuration (line 133) | void strcatDuration(char *str, float value) {
function strcatLoad (line 145) | void strcatLoad(char *str, float value) {
function crc32 (line 175) | uint32_t crc32(const uint8_t *mem_block, size_t block_size) {
function toBCD (line 188) | uint8_t toBCD(uint8_t bin) {
function fromBCD (line 192) | uint8_t fromBCD(uint8_t bcd) {
function floorPrec (line 196) | float floorPrec(float a, float prec) {
function ceilPrec (line 200) | float ceilPrec(float a, float prec) {
function roundPrec (line 204) | float roundPrec(float a, float prec) {
function greater (line 208) | bool greater(float a, float b, float prec) {
function greater (line 212) | bool greater(float a, float b, ValueType valueType, int channelInd...
function greaterOrEqual (line 216) | bool greaterOrEqual(float a, float b, float prec) {
function greaterOrEqual (line 220) | bool greaterOrEqual(float a, float b, ValueType valueType, int cha...
function less (line 224) | bool less(float a, float b, float prec) {
function less (line 228) | bool less(float a, float b, ValueType valueType, int channelIndex) {
function lessOrEqual (line 232) | bool lessOrEqual(float a, float b, float prec) {
function lessOrEqual (line 236) | bool lessOrEqual(float a, float b, ValueType valueType, int channe...
function equal (line 240) | bool equal(float a, float b, float prec) {
function equal (line 244) | bool equal(float a, float b, ValueType valueType, int channelIndex) {
function between (line 249) | bool between(float x, float a, float b, float prec) {
function between (line 253) | bool between(float x, float a, float b, ValueType valueType, int c...
function multiply (line 257) | float multiply(float a, float b, float prec) {
function isNaN (line 261) | bool isNaN(float x) {
function isDigit (line 265) | bool isDigit(char ch) {
function isHexDigit (line 269) | bool isHexDigit(char ch) {
function isUperCaseLetter (line 273) | bool isUperCaseLetter(char ch) {
function toHexDigit (line 277) | char toHexDigit(int num) {
function fromHexDigit (line 285) | int fromHexDigit(char ch) {
function removeTrailingZerosFromFloat (line 297) | void removeTrailingZerosFromFloat(char *str) {
function pointInsideRect (line 311) | bool pointInsideRect(int xPoint, int yPoint, int xRect, int yRect,...
function getParentDir (line 316) | void getParentDir(const char *path, char *parentDirPath) {
function parseMacAddress (line 330) | bool parseMacAddress(const char *macAddressStr, size_t macAddressS...
function parseIpAddress (line 370) | bool parseIpAddress(const char *ipAddressStr, size_t ipAddressStrL...
function getIpAddressPartA (line 414) | int getIpAddressPartA(uint32_t ipAddress) {
function setIpAddressPartA (line 418) | void setIpAddressPartA(uint32_t *ipAddress, uint8_t value) {
function getIpAddressPartB (line 422) | int getIpAddressPartB(uint32_t ipAddress) {
function setIpAddressPartB (line 426) | void setIpAddressPartB(uint32_t *ipAddress, uint8_t value) {
function getIpAddressPartC (line 430) | int getIpAddressPartC(uint32_t ipAddress) {
function setIpAddressPartC (line 434) | void setIpAddressPartC(uint32_t *ipAddress, uint8_t value) {
function getIpAddressPartD (line 438) | int getIpAddressPartD(uint32_t ipAddress) {
function setIpAddressPartD (line 442) | void setIpAddressPartD(uint32_t *ipAddress, uint8_t value) {
function ipAddressToArray (line 446) | void ipAddressToArray(uint32_t ipAddress, uint8_t *ipAddressArray) {
function arrayToIpAddress (line 453) | uint32_t arrayToIpAddress(uint8_t *ipAddressArray) {
function getIpAddress (line 457) | uint32_t getIpAddress(uint8_t a, uint8_t b, uint8_t c, uint8_t d) {
function ipAddressToString (line 468) | void ipAddressToString(uint32_t ipAddress, char *ipAddressStr) {
function macAddressToString (line 476) | void macAddressToString(uint8_t *macAddress, char *macAddressStr) {
function formatTimeZone (line 484) | void formatTimeZone(int16_t timeZone, char *text, int count) {
function parseTimeZone (line 502) | bool parseTimeZone(const char *timeZoneStr, size_t timeZoneLength,...
function replaceCharacter (line 583) | void replaceCharacter(char *str, char ch, char repl) {
function endsWith (line 592) | bool endsWith(const char *str, const char *suffix) {
FILE: eez_psu_sketch/util.h
function namespace (line 31) | namespace eez {
FILE: eez_psu_sketch/value.cpp
type eez (line 24) | namespace eez {
type psu (line 25) | namespace psu {
function getPrecision (line 54) | float getPrecision(float value, ValueType valueType, int channelInde...
FILE: eez_psu_sketch/value.h
function namespace (line 30) | namespace eez {
FILE: eez_psu_sketch/watchdog.cpp
type eez (line 25) | namespace eez {
type psu (line 26) | namespace psu {
type watchdog (line 27) | namespace watchdog {
function enable (line 35) | void enable() {
function disable (line 43) | void disable() {
function tick (line 48) | void tick(uint32_t tick_usec) {
function printInfo (line 80) | void printInfo() {
FILE: eez_psu_sketch/watchdog.h
function namespace (line 21) | namespace eez {
FILE: libraries/eez_psu_lib/src/R1B9/R1B9_init.cpp
function eez_psu_R1B9_init (line 22) | void eez_psu_R1B9_init() {
FILE: libraries/eez_psu_lib/src/R3B4/R3B4_init.cpp
function eez_psu_R3B4_init (line 22) | void eez_psu_R3B4_init() {
FILE: libraries/eez_psu_lib/src/R5B12/R5B12_init.cpp
function eez_psu_R5B12_init (line 22) | void eez_psu_R5B12_init() {
FILE: libraries/scpi-parser/src/impl/error.c
function SCPI_ErrorInit (line 53) | void SCPI_ErrorInit(scpi_t * context, int16_t * data, int16_t size) {
function SCPI_ErrorEmitEmpty (line 61) | static void SCPI_ErrorEmitEmpty(scpi_t * context) {
function SCPI_ErrorEmit (line 76) | static void SCPI_ErrorEmit(scpi_t * context, int16_t err) {
function SCPI_ErrorClear (line 88) | void SCPI_ErrorClear(scpi_t * context) {
function SCPI_ErrorPop (line 99) | int16_t SCPI_ErrorPop(scpi_t * context) {
function SCPI_ErrorCount (line 114) | int32_t SCPI_ErrorCount(scpi_t * context) {
function scpi_bool_t (line 122) | static scpi_bool_t SCPI_ErrorAddInternal(scpi_t * context, int16_t err) {
type error_reg (line 131) | struct error_reg {
type error_reg (line 139) | struct error_reg
function SCPI_ErrorPush (line 156) | void SCPI_ErrorPush(scpi_t * context, int16_t err) {
FILE: libraries/scpi-parser/src/impl/expression.c
function scpi_expr_result_t (line 52) | static scpi_expr_result_t numericRange(lex_state_t * state, scpi_bool_t ...
function scpi_expr_result_t (line 83) | scpi_expr_result_t SCPI_ExprNumericListEntry(scpi_t * context, scpi_para...
function scpi_expr_result_t (line 134) | scpi_expr_result_t SCPI_ExprNumericListEntryInt(scpi_t * context, scpi_p...
function scpi_expr_result_t (line 165) | scpi_expr_result_t SCPI_ExprNumericListEntryDouble(scpi_t * context, scp...
function scpi_expr_result_t (line 191) | static scpi_expr_result_t channelSpec(scpi_t * context, lex_state_t * st...
function scpi_expr_result_t (line 225) | static scpi_expr_result_t channelRange(scpi_t * context, lex_state_t * s...
function scpi_expr_result_t (line 266) | scpi_expr_result_t SCPI_ExprChannelListEntry(scpi_t * context, scpi_para...
FILE: libraries/scpi-parser/src/impl/fifo.c
function fifo_init (line 8) | void fifo_init(scpi_fifo_t * fifo, int16_t * data, int16_t size) {
function fifo_clear (line 20) | void fifo_clear(scpi_fifo_t * fifo) {
function scpi_bool_t (line 31) | scpi_bool_t fifo_is_empty(scpi_fifo_t * fifo) {
function scpi_bool_t (line 40) | scpi_bool_t fifo_is_full(scpi_fifo_t * fifo) {
function scpi_bool_t (line 50) | scpi_bool_t fifo_add(scpi_fifo_t * fifo, int16_t value) {
function scpi_bool_t (line 68) | scpi_bool_t fifo_remove(scpi_fifo_t * fifo, int16_t * value) {
function scpi_bool_t (line 90) | scpi_bool_t fifo_remove_last(scpi_fifo_t * fifo, int16_t * value) {
function scpi_bool_t (line 112) | scpi_bool_t fifo_count(scpi_fifo_t * fifo, int16_t * value) {
FILE: libraries/scpi-parser/src/impl/ieee488.c
function regUpdate (line 49) | static void regUpdate(scpi_t * context, scpi_reg_name_t name) {
function regUpdateSTB (line 60) | static void regUpdateSTB(scpi_t * context, scpi_reg_val_t val, scpi_reg_...
function scpi_reg_val_t (line 73) | scpi_reg_val_t SCPI_RegGet(scpi_t * context, scpi_reg_name_t name) {
function writeControl (line 87) | static size_t writeControl(scpi_t * context, scpi_ctrl_name_t ctrl, scpi...
function SCPI_RegSet (line 100) | void SCPI_RegSet(scpi_t * context, scpi_reg_name_t name, scpi_reg_val_t ...
function SCPI_RegSetBits (line 171) | void SCPI_RegSetBits(scpi_t * context, scpi_reg_name_t name, scpi_reg_va...
function SCPI_RegClearBits (line 180) | void SCPI_RegClearBits(scpi_t * context, scpi_reg_name_t name, scpi_reg_...
function SCPI_EventClear (line 188) | void SCPI_EventClear(scpi_t * context) {
function scpi_result_t (line 199) | scpi_result_t SCPI_CoreCls(scpi_t * context) {
function scpi_result_t (line 212) | scpi_result_t SCPI_CoreEse(scpi_t * context) {
function scpi_result_t (line 226) | scpi_result_t SCPI_CoreEseQ(scpi_t * context) {
function scpi_result_t (line 236) | scpi_result_t SCPI_CoreEsrQ(scpi_t * context) {
function scpi_result_t (line 253) | scpi_result_t SCPI_CoreIdnQ(scpi_t * context) {
function scpi_result_t (line 270) | scpi_result_t SCPI_CoreOpc(scpi_t * context) {
function scpi_result_t (line 280) | scpi_result_t SCPI_CoreOpcQ(scpi_t * context) {
function scpi_result_t (line 291) | scpi_result_t SCPI_CoreRst(scpi_t * context) {
function scpi_result_t (line 303) | scpi_result_t SCPI_CoreSre(scpi_t * context) {
function scpi_result_t (line 317) | scpi_result_t SCPI_CoreSreQ(scpi_t * context) {
function scpi_result_t (line 327) | scpi_result_t SCPI_CoreStbQ(scpi_t * context) {
function scpi_result_t (line 337) | scpi_result_t SCPI_CoreTstQ(scpi_t * context) {
function scpi_result_t (line 348) | scpi_result_t SCPI_CoreWai(scpi_t * context) {
FILE: libraries/scpi-parser/src/impl/lexer.c
function isws (line 49) | static int isws(int c) {
function isbdigit (line 61) | static int isbdigit(int c) {
function isqdigit (line 73) | static int isqdigit(int c) {
function iseos (line 85) | static int iseos(lex_state_t * state) {
function scpiLex_IsEos (line 98) | int scpiLex_IsEos(lex_state_t * state) {
function ischr (line 108) | static int ischr(lex_state_t * state, char chr) {
function isplusmn (line 117) | static int isplusmn(int c) {
function isH (line 126) | static int isH(int c) {
function isB (line 135) | static int isB(int c) {
function isQ (line 144) | static int isQ(int c) {
function isE (line 153) | static int isE(int c) {
function skipWs (line 170) | static int skipWs(lex_state_t * state) {
function skipDigit (line 191) | static int skipDigit(lex_state_t * state) {
function skipNumbers (line 205) | static int skipNumbers(lex_state_t * state) {
function skipPlusmn (line 219) | static int skipPlusmn(lex_state_t * state) {
function skipAlpha (line 233) | static int skipAlpha(lex_state_t * state) {
function skipChr (line 248) | static int skipChr(lex_state_t * state, char chr) {
function skipSlashDot (line 262) | static int skipSlashDot(lex_state_t * state) {
function skipStar (line 276) | static int skipStar(lex_state_t * state) {
function skipColon (line 290) | static int skipColon(lex_state_t * state) {
function skipProgramMnemonic (line 306) | static int skipProgramMnemonic(lex_state_t * state) {
function scpiLex_WhiteSpace (line 330) | int scpiLex_WhiteSpace(lex_state_t * state, scpi_token_t * token) {
function skipCommonProgramHeader (line 353) | static int skipCommonProgramHeader(lex_state_t * state) {
function skipCompoundProgramHeader (line 375) | static int skipCompoundProgramHeader(lex_state_t * state) {
function scpiLex_ProgramHeader (line 405) | int scpiLex_ProgramHeader(lex_state_t * state, scpi_token_t * token) {
function scpiLex_CharacterProgramData (line 451) | int scpiLex_CharacterProgramData(lex_state_t * state, scpi_token_t * tok...
function skipMantisa (line 472) | static int skipMantisa(lex_state_t * state) {
function skipExponent (line 486) | static int skipExponent(lex_state_t * state) {
function scpiLex_DecimalNumericProgramData (line 508) | int scpiLex_DecimalNumericProgramData(lex_state_t * state, scpi_token_t ...
function scpiLex_SuffixProgramData (line 533) | int scpiLex_SuffixProgramData(lex_state_t * state, scpi_token_t * token) {
function skipHexNum (line 563) | static int skipHexNum(lex_state_t * state) {
function skipOctNum (line 572) | static int skipOctNum(lex_state_t * state) {
function skipBinNum (line 581) | static int skipBinNum(lex_state_t * state) {
function scpiLex_NondecimalNumericData (line 596) | int scpiLex_NondecimalNumericData(lex_state_t * state, scpi_token_t * to...
function isascii7bit (line 629) | static int isascii7bit(int c) {
function skipQuoteProgramData (line 633) | static void skipQuoteProgramData(lex_state_t * state, char quote) {
function skipDoubleQuoteProgramData (line 651) | static void skipDoubleQuoteProgramData(lex_state_t * state) {
function skipSingleQuoteProgramData (line 655) | static void skipSingleQuoteProgramData(lex_state_t * state) {
function scpiLex_StringProgramData (line 665) | int scpiLex_StringProgramData(lex_state_t * state, scpi_token_t * token) {
function isNonzeroDigit (line 707) | static int isNonzeroDigit(int c) {
function scpiLex_ArbitraryBlockProgramData (line 717) | in
Copy disabled (too large)
Download .json
Condensed preview — 452 files, each showing path, character count, and a content snippet. Download the .json file for the full structured content (11,588K chars).
[
{
"path": ".gitignore",
"chars": 265,
"preview": "*.pyc\ndoc/html\n.vscode\nsimulator/platform/win32/eez_psu_sim.VC.db\n*.opendb\n*.eez-studio-cache\npsu.eez-project-ui-state\n."
},
{
"path": "CONTRIB.TXT",
"chars": 500,
"preview": "\tYou must attempt to send the modified documentation by email to any of the developers who have provided their email add"
},
{
"path": "LICENSE.TXT",
"chars": 35147,
"preview": " GNU GENERAL PUBLIC LICENSE\n Version 3, 29 June 2007\n\n Copyright (C) 2007 Free "
},
{
"path": "build-arduino-library.py",
"chars": 4195,
"preview": "from __future__ import (print_function)\n\n'''\nEEZ PSU Firmware\nCopyright (C) 2015 Envox d.o.o.\n\nThis program is free soft"
},
{
"path": "build.py",
"chars": 1229,
"preview": "'''\nEEZ PSU Firmware\nCopyright (C) 2015 Envox d.o.o.\n\nThis program is free software: you can redistribute it and/or modi"
},
{
"path": "doc/Doxyfile",
"chars": 106680,
"preview": "# Doxyfile 1.8.10\n\n# This file describes the settings to be used by the documentation system\n# doxygen (www.doxygen.org)"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 1 - introduction.html",
"chars": 8384,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 10 - Programming examples.html",
"chars": 78133,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 12 - SCPI commands summary.html",
"chars": 136101,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 2 - syntax and style.html",
"chars": 34736,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 3 - registers and queue.html",
"chars": 68414,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 4 - common comand reference.html",
"chars": 70243,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.1 - ABORt.html",
"chars": 8764,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.10 - MMEMory.html",
"chars": 126310,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.11 - OUTPut.html",
"chars": 60776,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.12 - SENSe.html",
"chars": 56499,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.13 - SOURce.html",
"chars": 213107,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.14 - STATus.html",
"chars": 97965,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.15 - SYSTem.html",
"chars": 294723,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.16 - TRIGger.html",
"chars": 34668,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.2 - CALibrate.html",
"chars": 78176,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.3 - DIAGnostic.html",
"chars": 31446,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.4 - DISPlay.html",
"chars": 27790,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.5 - FETCh.html",
"chars": 14550,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.6 - INITiate.html",
"chars": 38851,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.7 - INSTrument.html",
"chars": 48697,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.8 - MEASure.html",
"chars": 29519,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 5.9 - MEMory.html",
"chars": 39829,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 6 - Device-specific commands.html",
"chars": 16066,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 7 - Error messages.html",
"chars": 59235,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 8 - Parameters and settings.html",
"chars": 113445,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Commands/EEZ PSU SCPI reference 9 - Software simulator.html",
"chars": 55409,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1//EN\" \"http://www.w3.org/TR/xhtml11/D"
},
{
"path": "doc/SCPI reference guide/Registers/SCPI registers (v1.1).sch",
"chars": 127714,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<!DOCTYPE eagle SYSTEM \"eagle.dtd\">\n<eagle version=\"7.5.0\">\n<drawing>\n<settings>\n"
},
{
"path": "doc/build.bat",
"chars": 42,
"preview": "dot -Tpng components.dot -o components.png"
},
{
"path": "doc/components.dot",
"chars": 406,
"preview": "digraph hierarchy {\n\n\tnodesep=1.0 // increases the separation between nodes\n\t\n\tnode [color=Red,fontname=Courier,shape=bo"
},
{
"path": "doc/files.md",
"chars": 2477,
"preview": "# File system structure\n\n|Folder/File|Description|\n|-|-|\n|`doc/`|Documentation related stuff.|\n| "
},
{
"path": "doc/template/customdoxygen.css",
"chars": 3413,
"preview": "/* Custom Look and feel - Can be edited\n----------------------------------- */\n#navrow1, #navrow2, #navrow3, #navrow4, #"
},
{
"path": "doc/template/doxy-boot.js",
"chars": 5003,
"preview": "$( document ).ready(function() {\n\n $(\"div.headertitle\").addClass(\"page-header\");\n $(\"div.title\").addClass(\"h1\");\n\n"
},
{
"path": "doc/template/footer.html",
"chars": 749,
"preview": "<!-- HTML footer for doxygen 1.8.8-->\n<!-- start footer part -->\n<!--BEGIN GENERATE_TREEVIEW-->\n<div id=\"nav-path\" class"
},
{
"path": "doc/template/header.html",
"chars": 2246,
"preview": "<!-- HTML header for doxygen 1.8.8-->\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.0 Transitional//EN\" \"http://www.w3.org/"
},
{
"path": "eez_psu_sketch/.gitignore",
"chars": 3281,
"preview": "Visual Micro\n.vs\nDebug\nPSU_SCPI.opensdf\nPSU_SCPI.sdf\nPSU_SCPI.vcxproj.user\nPSU_SCPI.vcxproj.filters\n__vm\n\n## Ignore Visu"
},
{
"path": "eez_psu_sketch/actions.cpp",
"chars": 25248,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2017-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/actions.h",
"chars": 9003,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2017-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/adc.cpp",
"chars": 7580,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/adc.h",
"chars": 2331,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/arduino_psu.h",
"chars": 1085,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015 Envox d.o.o.\n *\n * This program is free software: you can redistribute it a"
},
{
"path": "eez_psu_sketch/arduino_util.cpp",
"chars": 1256,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/arduino_util.h",
"chars": 1052,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/board.cpp",
"chars": 1750,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/board.h",
"chars": 1007,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/bp.cpp",
"chars": 5898,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/bp.h",
"chars": 2693,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/buzzer.cpp",
"chars": 3241,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/buzzer.h",
"chars": 870,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/calibration.cpp",
"chars": 12311,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/calibration.h",
"chars": 2734,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/channel.cpp",
"chars": 61085,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/channel.h",
"chars": 21487,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/channel_dispatcher.cpp",
"chars": 29385,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/channel_dispatcher.h",
"chars": 5388,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/conf.h",
"chars": 2991,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/conf_advanced.h",
"chars": 11403,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/conf_channel.h",
"chars": 8094,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/conf_user.h",
"chars": 1533,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015 Envox d.o.o.\n *\n * This program is free software: you can redistribute it a"
},
{
"path": "eez_psu_sketch/conf_user_revision.h",
"chars": 1047,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/dac.cpp",
"chars": 5403,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/dac.h",
"chars": 1564,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/datetime.cpp",
"chars": 15044,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/datetime.h",
"chars": 2742,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/debug.cpp",
"chars": 9968,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/debug.h",
"chars": 3798,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/devices.cpp",
"chars": 4135,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/devices.h",
"chars": 1131,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/dlog.cpp",
"chars": 7310,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2018-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/dlog.h",
"chars": 1493,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2018-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/eeprom.cpp",
"chars": 5788,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/eeprom.h",
"chars": 11079,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/eez_psu_sketch.ino",
"chars": 1209,
"preview": "/**\n * EEZ PSU Firmware\n * Copyright (C) 2015 Envox d.o.o.\n *\n * This program is free software: you can redistribute it "
},
{
"path": "eez_psu_sketch/eez_psu_sketch.sln",
"chars": 931,
"preview": "\nMicrosoft Visual Studio Solution File, Format Version 12.00\n# Visual Studio 14\nVisualStudioVersion = 14.0.24720.0\nMini"
},
{
"path": "eez_psu_sketch/eez_psu_sketch.vcxproj",
"chars": 19430,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<Project DefaultTargets=\"Build\" ToolsVersion=\"4.0\" xmlns=\"http://schemas.microso"
},
{
"path": "eez_psu_sketch/eez_psu_sketch.vcxproj.filters",
"chars": 15972,
"preview": "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n<Project ToolsVersion=\"4.0\" xmlns=\"http://schemas.microsoft.com/developer/msbuil"
},
{
"path": "eez_psu_sketch/encoder.cpp",
"chars": 4851,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/encoder.h",
"chars": 1244,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/ethernet.cpp",
"chars": 9078,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/ethernet.h",
"chars": 1033,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/event_queue.cpp",
"chars": 7370,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/event_queue.h",
"chars": 8993,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/fan.cpp",
"chars": 8952,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/fan.h",
"chars": 1157,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/font.cpp",
"chars": 3145,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/font.h",
"chars": 1565,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gesture.cpp",
"chars": 3064,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gesture.h",
"chars": 384,
"preview": "#pragma once\n\nnamespace eez {\nnamespace psu {\nnamespace gui {\nnamespace gesture {\n\nenum GestureType {\n GESTURE_NONE,\n"
},
{
"path": "eez_psu_sketch/gui.cpp",
"chars": 53376,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui.h",
"chars": 1556,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_calibration.cpp",
"chars": 13819,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_calibration.h",
"chars": 1093,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_data.cpp",
"chars": 49097,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_data.h",
"chars": 6835,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/gui_document.cpp",
"chars": 1171300,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2017-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/gui_document.h",
"chars": 17183,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2017-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/gui_edit_mode.cpp",
"chars": 7575,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/gui_edit_mode.h",
"chars": 1403,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/gui_edit_mode_keypad.cpp",
"chars": 1868,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/gui_edit_mode_keypad.h",
"chars": 1057,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/gui_edit_mode_slider.cpp",
"chars": 2704,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_edit_mode_slider.h",
"chars": 1061,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_edit_mode_step.cpp",
"chars": 4276,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/gui_edit_mode_step.h",
"chars": 1071,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/gui_internal.h",
"chars": 7121,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_keypad.cpp",
"chars": 5514,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_keypad.h",
"chars": 2445,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_numeric_keypad.cpp",
"chars": 16537,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_numeric_keypad.h",
"chars": 3044,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page.cpp",
"chars": 6549,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page.h",
"chars": 3000,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_ch_settings_adv.cpp",
"chars": 10279,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_ch_settings_adv.h",
"chars": 2750,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_ch_settings_info.cpp",
"chars": 1018,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_ch_settings_info.h",
"chars": 951,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_ch_settings_protection.cpp",
"chars": 12562,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_ch_settings_protection.h",
"chars": 2552,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_ch_settings_trigger.cpp",
"chars": 26539,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_ch_settings_trigger.h",
"chars": 3474,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_event_queue.cpp",
"chars": 2781,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_event_queue.h",
"chars": 972,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_main.cpp",
"chars": 1562,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_main.h",
"chars": 942,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_self_test_result.cpp",
"chars": 1268,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_self_test_result.h",
"chars": 1036,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_sys_info.cpp",
"chars": 3006,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_sys_info.h",
"chars": 944,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_sys_settings.cpp",
"chars": 33559,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_sys_settings.h",
"chars": 7287,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_user_profiles.cpp",
"chars": 5733,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_page_user_profiles.h",
"chars": 1417,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_password.cpp",
"chars": 4403,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_password.h",
"chars": 958,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_view.cpp",
"chars": 74577,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_view.h",
"chars": 7461,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/gui_widget_button_group.cpp",
"chars": 4608,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/gui_widget_button_group.h",
"chars": 989,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/idle.cpp",
"chars": 2778,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2015-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/idle.h",
"chars": 956,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2017-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/io_pins.cpp",
"chars": 6870,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/io_pins.h",
"chars": 1254,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/ioexp.cpp",
"chars": 6867,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/ioexp.h",
"chars": 4247,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/lcd.cpp",
"chars": 39957,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/lcd.h",
"chars": 3407,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/list.cpp",
"chars": 17463,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/list.h",
"chars": 2441,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/ntp.cpp",
"chars": 8533,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/ntp.h",
"chars": 1032,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/ontime.cpp",
"chars": 2515,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/ontime.h",
"chars": 1346,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2016-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/persist_conf.cpp",
"chars": 28064,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/persist_conf.h",
"chars": 7525,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/pid.cpp",
"chars": 7905,
"preview": "/**********************************************************************************************\n* Arduino PID Library - "
},
{
"path": "eez_psu_sketch/pid.h",
"chars": 3676,
"preview": "#ifndef PID_v1_h\n#define PID_v1_h\n#define LIBRARY_VERSION\t1.2.1\n\nclass PID\n{\n\n\npublic:\n\n\t//Constants used in some of the"
},
{
"path": "eez_psu_sketch/profile.cpp",
"chars": 17694,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/profile.h",
"chars": 3347,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/psu.cpp",
"chars": 37150,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/psu.h",
"chars": 2880,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/rtc.cpp",
"chars": 5001,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/rtc.h",
"chars": 2366,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_appl.cpp",
"chars": 4453,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_cal.cpp",
"chars": 10715,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_commands.h",
"chars": 28058,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2017-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/scpi_core.cpp",
"chars": 3243,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_debug.cpp",
"chars": 7975,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_diag.cpp",
"chars": 14839,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_display.cpp",
"chars": 4198,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_dlog.cpp",
"chars": 6847,
"preview": "/*\n* EEZ PSU Firmware\n* Copyright (C) 2018-present, Envox d.o.o.\n*\n* This program is free software: you can redistribute"
},
{
"path": "eez_psu_sketch/scpi_inst.cpp",
"chars": 8281,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_meas.cpp",
"chars": 2669,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_mem.cpp",
"chars": 4497,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_mmem.cpp",
"chars": 18158,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_outp.cpp",
"chars": 5614,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_params.cpp",
"chars": 20620,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_params.h",
"chars": 3700,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_psu.cpp",
"chars": 5034,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_psu.h",
"chars": 1677,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_regs.cpp",
"chars": 9764,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_regs.h",
"chars": 4154,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_sense.cpp",
"chars": 5000,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_simu.cpp",
"chars": 12353,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_sour.cpp",
"chars": 35510,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_stat.cpp",
"chars": 10729,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_syst.cpp",
"chars": 39292,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_trigger.cpp",
"chars": 6152,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/scpi_user_config.h",
"chars": 8795,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/sd_card.cpp",
"chars": 16654,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/sd_card.h",
"chars": 2111,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2017-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/serial_psu.cpp",
"chars": 5029,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/serial_psu.h",
"chars": 1141,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/sound.cpp",
"chars": 4675,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/sound.h",
"chars": 1071,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/temp_sensor.cpp",
"chars": 3011,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
},
{
"path": "eez_psu_sketch/temp_sensor.h",
"chars": 2824,
"preview": "/*\n * EEZ PSU Firmware\n * Copyright (C) 2015-present, Envox d.o.o.\n *\n * This program is free software: you can redistri"
}
]
// ... and 252 more files (download for full content)
About this extraction
This page contains the full source code of the eez-open/psu-firmware GitHub repository, extracted and formatted as plain text for AI agents and large language models (LLMs). The extraction includes 452 files (10.3 MB), approximately 2.7M tokens, and a symbol index with 2658 extracted functions, classes, methods, constants, and types. Use this with OpenClaw, Claude, ChatGPT, Cursor, Windsurf, or any other AI tool that accepts text input. You can copy the full output to your clipboard or download it as a .txt file.
Extracted by GitExtract — free GitHub repo to text converter for AI. Built by Nikandr Surkov.