[
  {
    "path": "README.md",
    "content": "# MY-CCNA-Prep-1\nUPDATE: I Passed my CCNA on 17th July 2020.\n.........  \nFOR DEATILED EXPLANATION : https://youtu.be/TsSCHq3rN0M and https://www.linkedin.com/in/imsiddhantin/\n\nI'm currently preparing for my CCNA 200-301 Exam. During the preparation, I build some labs on various topics of Networking with the help of Cisco Packet Tracer.  I hope, these labs will help you too during your preparations.\n\nLAB 1:\n>>>> In this VLAN LAB, 2 VLANs are created. Black & Blue. S3 & S4 are connected with Trunk Links. \n>>>> PC0 - PC2 & PC1 - PC3 can communicate across the switches.\n\nLAB2:\n>>>> Static Routes has been setup between Router1 & Router 0.\n>>>> To Communicate between VLAN 10 & VLAN 20, ROAS(Router on a Stick) is implemented.\n\nLAB 3:\n>>>> Router 0,1,2 & 3 are connected with RIP (Routing Information Protocol) \n>>>> All three networks 172.18.1.0, 10.2.1.0, 192.168.10.0 can communicate with each other using RIP\n\nLAB 4:\n>>>> IPV6 addresses are used (2001:0db8:0:0::/64) Range\n>>>> Static Routes are added via Router 15's G0/1/0 interface.\n>>>> Floating Route on Router 15 added via interface G0/0\n\nLAB 5:\n>>>> OSPF is implemented between all five routers in this LAB. \n>>>> Routers are having Router ID (1.1.1.1, 2.2.2.2, 3.3.3.3, 4.4.4.4 and 5.5.5.5)\n\nLAB 6:\n>>>> HSRP(Hot Standby Routing Protocol) is implemented between Router0 & Router1.\n>>>> A virtual Router with IP Address of 10.1.1.4 /24 is also been setup.\n>>>> Router1 is Active and Router0 is on Standby to take over in case of any failures.\n\nLAB 7:\n>>>> A simple TACACS+ implementation has been done.\n>>>> Router is acting as a TACACS Client while server is providing authentication Services.\n\nLAB 8:\n>>>> In this implementation of WPA2 PSK, I have created a simple Wireless LAN where AP0, AP1 & AP2 are connected from Backbone Network (Switch 0). \n>>>> Each Access Point is running WIFI on different Channels to remove Overlapping. Each AP is also configured with different Security Settings.\n\nLAB 9: \n>>>> In this lab, I demonstrated the use of access control lists and how can they allow and deny certain types of traffic.\n>>>> Extended Access Lists are deployed.\n\nLAB 10:\n>>>> GRE Tunnel0 established between Router0 and Router1. \n"
  }
]