Copy disabled (too large)
Download .txt
Showing preview only (105,232K chars total). Download the full file to get everything.
Repository: prusa3d/PrusaSlicer-settings
Branch: master
Commit: 6a291ebf5c21
Files: 723
Total size: 132.0 MB
Directory structure:
gitextract_4uxuaj19/
├── License
├── README.md
├── live/
│ ├── Anker/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.1.1.ini
│ │ ├── 1.1.2.ini
│ │ ├── 1.1.3.ini
│ │ ├── License.txt
│ │ ├── M5-bed.stl
│ │ ├── M5C-bed.stl
│ │ ├── README.md
│ │ └── index.idx
│ ├── Anycubic/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.10.ini
│ │ ├── 0.0.11.ini
│ │ ├── 0.0.12.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── 0.0.5.ini
│ │ ├── 0.0.6.ini
│ │ ├── 0.0.7.ini
│ │ ├── 0.0.8.ini
│ │ ├── 0.0.9.ini
│ │ ├── 0.1.0.ini
│ │ ├── 0.1.1.ini
│ │ ├── 0.1.2.ini
│ │ ├── 0.2.0.ini
│ │ ├── 0.2.1.ini
│ │ ├── 0.2.2.ini
│ │ ├── 0.2.3.ini
│ │ ├── 0.2.4.ini
│ │ ├── 0.2.5.ini
│ │ ├── 0.2.6.ini
│ │ ├── 0.2.7.ini
│ │ ├── 0.2.8.ini
│ │ ├── 4MAXPRO20_bed.stl
│ │ ├── AKLP_Bed.stl
│ │ ├── AK_Bed.stl
│ │ ├── i3megas_bed.stl
│ │ ├── index.idx
│ │ └── mega0_bed.stl
│ ├── AnycubicSLA/
│ │ ├── 0.0.1.ini
│ │ ├── 1.0.0.ini
│ │ └── index.idx
│ ├── Artillery/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── 0.0.5.ini
│ │ ├── 0.0.6.ini
│ │ ├── 0.0.7.ini
│ │ ├── 0.0.8.ini
│ │ ├── 0.0.9.ini
│ │ ├── bed-genius.stl
│ │ ├── bed-hornet.stl
│ │ ├── bed-x1.stl
│ │ ├── bed-x3-plus.stl
│ │ ├── bed-x3-pro.stl
│ │ ├── bed-x4-max.stl
│ │ ├── bed-x4-plus.stl
│ │ ├── bed-x4-pro.stl
│ │ └── index.idx
│ ├── BIBO/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── 0.0.5.ini
│ │ ├── 0.0.6.ini
│ │ ├── 0.0.7.ini
│ │ ├── BIBO2_bed.stl
│ │ ├── index.idx
│ │ └── test.txt
│ ├── BIQU/
│ │ ├── 0.1.0.ini
│ │ ├── BX_Bed.stl
│ │ └── index.idx
│ ├── CocoaPress/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.0.4.ini
│ │ ├── 1.0.5.ini
│ │ ├── index.idx
│ │ └── minichef_bed.stl
│ ├── Creality/
│ │ ├── 0.0.10.ini
│ │ ├── 0.0.11.ini
│ │ ├── 0.0.12.ini
│ │ ├── 0.0.13.ini
│ │ ├── 0.0.14.ini
│ │ ├── 0.0.15.ini
│ │ ├── 0.0.16.ini
│ │ ├── 0.0.17.ini
│ │ ├── 0.0.2-beta.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── 0.0.5.ini
│ │ ├── 0.0.6.ini
│ │ ├── 0.0.7.ini
│ │ ├── 0.0.8.ini
│ │ ├── 0.0.9.ini
│ │ ├── 0.1.0.ini
│ │ ├── 0.1.1.ini
│ │ ├── 0.1.2.ini
│ │ ├── 0.1.3.ini
│ │ ├── 0.1.4.ini
│ │ ├── 0.1.5.ini
│ │ ├── 0.2.0.ini
│ │ ├── 0.2.1.ini
│ │ ├── 0.2.2.ini
│ │ ├── 0.2.3.ini
│ │ ├── 0.2.4.ini
│ │ ├── 0.2.6.ini
│ │ ├── 0.2.7.ini
│ │ ├── 0.3.0.ini
│ │ ├── cr10_bed.stl
│ │ ├── cr10max_bed.stl
│ │ ├── cr10mini_bed.stl
│ │ ├── cr10s4_bed.stl
│ │ ├── cr10s5_bed.stl
│ │ ├── cr10v2_bed.stl
│ │ ├── cr200b_bed.stl
│ │ ├── cr5pro_bed.stl
│ │ ├── cr6se_bed.stl
│ │ ├── cr8_bed.stl
│ │ ├── ender2_bed.stl
│ │ ├── ender2pro_bed.stl
│ │ ├── ender3_bed.stl
│ │ ├── ender3v2_bed.stl
│ │ ├── ender5plus_bed.stl
│ │ ├── ender6_bed.stl
│ │ ├── ender7_bed.stl
│ │ ├── index.idx
│ │ ├── sermoond1_bed.stl
│ │ └── sermoonv1_bed.stl
│ ├── Elegoo/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ └── index.idx
│ ├── FLSun/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── Q5_bed.stl
│ │ ├── QQSP_bed.stl
│ │ └── index.idx
│ ├── Geeetech/
│ │ ├── 0.1.0.ini
│ │ ├── 125X130.stl
│ │ ├── 150x150.stl
│ │ ├── 160x160.stl
│ │ ├── 180X150.stl
│ │ ├── 200x200.stl
│ │ ├── 220x220.stl
│ │ ├── 250x250.stl
│ │ ├── 255x255.stl
│ │ ├── 300x180.stl
│ │ ├── 320x320.stl
│ │ └── index.idx
│ ├── HartSmartProducts/
│ │ ├── 0.1.0.ini
│ │ ├── 0.1.1.ini
│ │ ├── hsp1_i_bed.stl
│ │ ├── hsp1_i_duplicator_bed.stl
│ │ └── index.idx
│ ├── INAT/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ └── index.idx
│ ├── Infinity3D/
│ │ ├── 1.0.0.ini
│ │ ├── DEV_200_bed.stl
│ │ ├── DEV_350_bed.stl
│ │ └── index.idx
│ ├── Jubilee/
│ │ ├── 1.0.0.ini
│ │ ├── Jubilee_bed.stl
│ │ └── index.idx
│ ├── LNL3D/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── LNL3D_D3_V2_bed.stl
│ │ ├── LNL3D_D3_VULCAN_bed.stl
│ │ ├── LNL3D_D3_bed.stl
│ │ ├── LNL3D_D5_bed.stl
│ │ ├── LNL3D_D6_bed.stl
│ │ └── index.idx
│ ├── LulzBot/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.1.0.ini
│ │ └── index.idx
│ ├── MakerGear/
│ │ ├── 0.1.0.ini
│ │ ├── 0.1.1.ini
│ │ ├── M2_M3.stl
│ │ └── index.idx
│ ├── PapapiuLab/
│ │ ├── 0.1.0.ini
│ │ ├── Papapiu_N1S_Bed.stl
│ │ └── index.idx
│ ├── Print4Taste/
│ │ ├── 0.0.1.ini
│ │ ├── MC2.0_bed.stl
│ │ └── index.idx
│ ├── PrusaResearch/
│ │ ├── 0.1.0.ini
│ │ ├── 0.1.1.ini
│ │ ├── 0.1.10.ini
│ │ ├── 0.1.11.ini
│ │ ├── 0.1.12.ini
│ │ ├── 0.1.13.ini
│ │ ├── 0.1.14.ini
│ │ ├── 0.1.15.ini
│ │ ├── 0.1.16.ini
│ │ ├── 0.1.17.ini
│ │ ├── 0.1.18.ini
│ │ ├── 0.1.2.ini
│ │ ├── 0.1.3.ini
│ │ ├── 0.1.4.ini
│ │ ├── 0.1.5.ini
│ │ ├── 0.1.6.ini
│ │ ├── 0.1.7.ini
│ │ ├── 0.1.8.ini
│ │ ├── 0.1.9.ini
│ │ ├── 0.2.0-alpha.ini
│ │ ├── 0.2.0-alpha1.ini
│ │ ├── 0.2.0-alpha2.ini
│ │ ├── 0.2.0-alpha3.ini
│ │ ├── 0.2.0-alpha7.ini
│ │ ├── 0.2.0-alpha8.ini
│ │ ├── 0.2.0-beta.ini
│ │ ├── 0.2.0-beta2.ini
│ │ ├── 0.2.0-beta3.ini
│ │ ├── 0.2.0-beta4.ini
│ │ ├── 0.2.0-beta5.ini
│ │ ├── 0.2.1.ini
│ │ ├── 0.2.2.ini
│ │ ├── 0.2.3.ini
│ │ ├── 0.2.4.ini
│ │ ├── 0.2.5.ini
│ │ ├── 0.2.6.ini
│ │ ├── 0.2.7.ini
│ │ ├── 0.2.8.ini
│ │ ├── 0.2.9.ini
│ │ ├── 0.3.0.ini
│ │ ├── 0.3.1.ini
│ │ ├── 0.3.10.ini
│ │ ├── 0.3.11.ini
│ │ ├── 0.3.2.ini
│ │ ├── 0.3.3.ini
│ │ ├── 0.3.4.ini
│ │ ├── 0.3.5.ini
│ │ ├── 0.3.6.ini
│ │ ├── 0.3.7.ini
│ │ ├── 0.3.8.ini
│ │ ├── 0.3.9.ini
│ │ ├── 0.4.0-alpha2.ini
│ │ ├── 0.4.0-alpha3.ini
│ │ ├── 0.4.0-alpha4.ini
│ │ ├── 0.4.0.ini
│ │ ├── 0.4.1.ini
│ │ ├── 0.4.10.ini
│ │ ├── 0.4.11.ini
│ │ ├── 0.4.12.ini
│ │ ├── 0.4.2.ini
│ │ ├── 0.4.3.ini
│ │ ├── 0.4.4.ini
│ │ ├── 0.4.5.ini
│ │ ├── 0.4.6.ini
│ │ ├── 0.4.7.ini
│ │ ├── 0.4.8.ini
│ │ ├── 0.4.9.ini
│ │ ├── 0.8.0-alpha.ini
│ │ ├── 0.8.0-alpha6.ini
│ │ ├── 0.8.0-alpha7.ini
│ │ ├── 0.8.0-alpha8.ini
│ │ ├── 0.8.0-alpha9.ini
│ │ ├── 0.8.0-beta.ini
│ │ ├── 0.8.0-beta1.ini
│ │ ├── 0.8.0-beta2.ini
│ │ ├── 0.8.0-beta3.ini
│ │ ├── 0.8.0-beta4.ini
│ │ ├── 0.8.0-rc.ini
│ │ ├── 0.8.0-rc1.ini
│ │ ├── 0.8.0-rc2.ini
│ │ ├── 0.8.0.ini
│ │ ├── 0.8.1.ini
│ │ ├── 0.8.10.ini
│ │ ├── 0.8.11.ini
│ │ ├── 0.8.2.ini
│ │ ├── 0.8.3.ini
│ │ ├── 0.8.4.ini
│ │ ├── 0.8.5.ini
│ │ ├── 0.8.6.ini
│ │ ├── 0.8.7.ini
│ │ ├── 0.8.8.ini
│ │ ├── 0.8.9.ini
│ │ ├── 1.0.0-alpha0.ini
│ │ ├── 1.0.0-alpha1.ini
│ │ ├── 1.0.0-alpha2.ini
│ │ ├── 1.0.0-beta0.ini
│ │ ├── 1.0.0-beta1.ini
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.10.ini
│ │ ├── 1.0.11.ini
│ │ ├── 1.0.12.ini
│ │ ├── 1.0.13.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.0.4.ini
│ │ ├── 1.0.5.ini
│ │ ├── 1.0.6.ini
│ │ ├── 1.0.7.ini
│ │ ├── 1.0.8.ini
│ │ ├── 1.0.9.ini
│ │ ├── 1.1.0.ini
│ │ ├── 1.1.1-alpha2.ini
│ │ ├── 1.1.1-alpha3.ini
│ │ ├── 1.1.1-alpha4.ini
│ │ ├── 1.1.1-beta.ini
│ │ ├── 1.1.1.ini
│ │ ├── 1.1.10.ini
│ │ ├── 1.1.11.ini
│ │ ├── 1.1.12.ini
│ │ ├── 1.1.13.ini
│ │ ├── 1.1.14.ini
│ │ ├── 1.1.15.ini
│ │ ├── 1.1.16.ini
│ │ ├── 1.1.17.ini
│ │ ├── 1.1.2.ini
│ │ ├── 1.1.3.ini
│ │ ├── 1.1.4.ini
│ │ ├── 1.1.5.ini
│ │ ├── 1.1.6.ini
│ │ ├── 1.1.7.ini
│ │ ├── 1.1.8.ini
│ │ ├── 1.1.9.ini
│ │ ├── 1.10.0.ini
│ │ ├── 1.10.1.ini
│ │ ├── 1.10.10.ini
│ │ ├── 1.10.11.ini
│ │ ├── 1.10.2.ini
│ │ ├── 1.10.3.ini
│ │ ├── 1.10.4.ini
│ │ ├── 1.10.5.ini
│ │ ├── 1.10.6.ini
│ │ ├── 1.10.7.ini
│ │ ├── 1.10.8.ini
│ │ ├── 1.10.9.ini
│ │ ├── 1.11.0-alpha0.ini
│ │ ├── 1.11.0-alpha1.ini
│ │ ├── 1.11.0-alpha2.ini
│ │ ├── 1.11.0-alpha3.ini
│ │ ├── 1.11.0-alpha4.ini
│ │ ├── 1.11.0-alpha5.ini
│ │ ├── 1.11.0-alpha6.ini
│ │ ├── 1.11.0-alpha7.ini
│ │ ├── 1.11.0-alpha8.ini
│ │ ├── 1.11.0-alpha9.ini
│ │ ├── 1.11.1-alpha0.ini
│ │ ├── 1.11.1-alpha1.ini
│ │ ├── 1.11.1-alpha2.ini
│ │ ├── 1.11.1-alpha3.ini
│ │ ├── 1.11.1-alpha4.ini
│ │ ├── 1.11.10.ini
│ │ ├── 1.11.11.ini
│ │ ├── 1.11.12.ini
│ │ ├── 1.11.13.ini
│ │ ├── 1.11.14.ini
│ │ ├── 1.11.15.ini
│ │ ├── 1.11.16.ini
│ │ ├── 1.11.2-alpha0.ini
│ │ ├── 1.11.2-alpha1.ini
│ │ ├── 1.11.2-beta0.ini
│ │ ├── 1.11.2.ini
│ │ ├── 1.11.3.ini
│ │ ├── 1.11.4.ini
│ │ ├── 1.11.5.ini
│ │ ├── 1.11.6.ini
│ │ ├── 1.11.7.ini
│ │ ├── 1.11.8.ini
│ │ ├── 1.11.9.ini
│ │ ├── 1.12.0-alpha0.ini
│ │ ├── 1.12.0-alpha1.ini
│ │ ├── 1.12.0-alpha2.ini
│ │ ├── 1.12.0-beta0.ini
│ │ ├── 1.12.0.ini
│ │ ├── 1.12.1.ini
│ │ ├── 1.12.2.ini
│ │ ├── 1.12.3.ini
│ │ ├── 1.13.0-alpha0.ini
│ │ ├── 1.13.0-alpha1.ini
│ │ ├── 1.13.0-alpha2.ini
│ │ ├── 1.13.0-alpha3.ini
│ │ ├── 1.13.0-alpha4.ini
│ │ ├── 1.13.0-beta0.ini
│ │ ├── 1.13.0-beta1.ini
│ │ ├── 1.13.0-beta2.ini
│ │ ├── 1.13.0-beta3.ini
│ │ ├── 1.13.0.ini
│ │ ├── 1.13.1.ini
│ │ ├── 1.13.2.ini
│ │ ├── 1.13.3.ini
│ │ ├── 1.13.4.ini
│ │ ├── 1.13.5.ini
│ │ ├── 1.13.6.ini
│ │ ├── 1.14.0.ini
│ │ ├── 1.14.1.ini
│ │ ├── 1.14.2.ini
│ │ ├── 1.2.0-alpha0.ini
│ │ ├── 1.2.0-alpha1.ini
│ │ ├── 1.2.0-beta0.ini
│ │ ├── 1.2.0-beta1.ini
│ │ ├── 1.2.0.ini
│ │ ├── 1.2.1.ini
│ │ ├── 1.2.10.ini
│ │ ├── 1.2.11.ini
│ │ ├── 1.2.12.ini
│ │ ├── 1.2.13.ini
│ │ ├── 1.2.14.ini
│ │ ├── 1.2.2.ini
│ │ ├── 1.2.3.ini
│ │ ├── 1.2.4.ini
│ │ ├── 1.2.5.ini
│ │ ├── 1.2.6.ini
│ │ ├── 1.2.7.ini
│ │ ├── 1.2.8.ini
│ │ ├── 1.2.9.ini
│ │ ├── 1.3.0.ini
│ │ ├── 1.3.1.ini
│ │ ├── 1.3.2.ini
│ │ ├── 1.3.3.ini
│ │ ├── 1.3.4.ini
│ │ ├── 1.3.5.ini
│ │ ├── 1.3.6.ini
│ │ ├── 1.3.7.ini
│ │ ├── 1.3.8.ini
│ │ ├── 1.3.9.ini
│ │ ├── 1.4.0-alpha0.ini
│ │ ├── 1.4.0-alpha1.ini
│ │ ├── 1.4.0-alpha2.ini
│ │ ├── 1.4.0-alpha3.ini
│ │ ├── 1.4.0-alpha4.ini
│ │ ├── 1.4.0-alpha5.ini
│ │ ├── 1.4.0-alpha6.ini
│ │ ├── 1.4.0-alpha7.ini
│ │ ├── 1.4.0-alpha8.ini
│ │ ├── 1.4.0-beta0.ini
│ │ ├── 1.4.0-beta1.ini
│ │ ├── 1.4.0-beta2.ini
│ │ ├── 1.4.0-beta3.ini
│ │ ├── 1.4.0.ini
│ │ ├── 1.4.1.ini
│ │ ├── 1.4.10.ini
│ │ ├── 1.4.2.ini
│ │ ├── 1.4.3.ini
│ │ ├── 1.4.4.ini
│ │ ├── 1.4.5.ini
│ │ ├── 1.4.6.ini
│ │ ├── 1.4.7.ini
│ │ ├── 1.4.8.ini
│ │ ├── 1.4.9.ini
│ │ ├── 1.5.0-alpha0.ini
│ │ ├── 1.5.0-alpha1.ini
│ │ ├── 1.5.0.ini
│ │ ├── 1.5.1.ini
│ │ ├── 1.5.2.ini
│ │ ├── 1.5.3.ini
│ │ ├── 1.5.4.ini
│ │ ├── 1.5.5.ini
│ │ ├── 1.5.6.ini
│ │ ├── 1.5.7.ini
│ │ ├── 1.5.8.ini
│ │ ├── 1.5.9.ini
│ │ ├── 1.6.0-alpha0.ini
│ │ ├── 1.6.0-alpha1.ini
│ │ ├── 1.6.0-alpha2.ini
│ │ ├── 1.6.0.ini
│ │ ├── 1.6.1.ini
│ │ ├── 1.6.2.ini
│ │ ├── 1.6.3.ini
│ │ ├── 1.6.4.ini
│ │ ├── 1.6.5.ini
│ │ ├── 1.6.6.ini
│ │ ├── 1.6.7.ini
│ │ ├── 1.7.0-alpha0.ini
│ │ ├── 1.7.0-alpha1.ini
│ │ ├── 1.7.0-alpha2.ini
│ │ ├── 1.7.0.ini
│ │ ├── 1.7.1.ini
│ │ ├── 1.7.2.ini
│ │ ├── 1.7.3.ini
│ │ ├── 1.7.4.ini
│ │ ├── 1.7.5.ini
│ │ ├── 1.7.6.ini
│ │ ├── 1.7.7.ini
│ │ ├── 1.7.8.ini
│ │ ├── 1.9.0-alpha0.ini
│ │ ├── 1.9.0-alpha1.ini
│ │ ├── 1.9.0-alpha2.ini
│ │ ├── 1.9.0-alpha3.ini
│ │ ├── 1.9.0-alpha4.ini
│ │ ├── 1.9.0-beta0.ini
│ │ ├── 1.9.0-beta1.ini
│ │ ├── 1.9.0-beta2.ini
│ │ ├── 1.9.0-beta3.ini
│ │ ├── 1.9.0.ini
│ │ ├── 1.9.1.ini
│ │ ├── 1.9.10.ini
│ │ ├── 1.9.11.ini
│ │ ├── 1.9.2.ini
│ │ ├── 1.9.3.ini
│ │ ├── 1.9.4.ini
│ │ ├── 1.9.5.ini
│ │ ├── 1.9.6.ini
│ │ ├── 1.9.7.ini
│ │ ├── 1.9.8.ini
│ │ ├── 1.9.9.ini
│ │ ├── index.idx
│ │ ├── mini_bed.stl
│ │ ├── mk2_bed.stl
│ │ ├── mk3_bed.stl
│ │ ├── mk4_bed.stl
│ │ ├── sl1_bed.stl
│ │ ├── sl1s_bed.stl
│ │ └── xl_bed.stl
│ ├── PrusaResearchSLA/
│ │ ├── 0.0.1.ini
│ │ ├── 1.0.0-alpha0.ini
│ │ ├── index.idx
│ │ ├── sl1_bed.stl
│ │ └── sl1s_bed.stl
│ ├── PrusaSlicer.version
│ ├── PrusaSlicer.version2
│ ├── RatRig/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.1.0.ini
│ │ ├── 1.1.1.ini
│ │ ├── README.md
│ │ ├── index.idx
│ │ ├── rr-vc-300.stl
│ │ ├── rr-vc-400.stl
│ │ ├── rr-vc-500.stl
│ │ └── rr-vminion.stl
│ ├── Rigid3D/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── index.idx
│ │ ├── mucit2_bed.stl
│ │ ├── mucit_bed.stl
│ │ └── zero_bed.stl
│ ├── Slic3rPE.version
│ ├── Snapmaker/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.1.0.ini
│ │ ├── 1.1.1.ini
│ │ ├── 1.1.2.ini
│ │ ├── A250_bed.stl
│ │ ├── A350_bed.stl
│ │ ├── Snapmaker A250_bed.stl
│ │ ├── Snapmaker A350_bed.stl
│ │ ├── Snapmaker Artisan_bed.stl
│ │ ├── Snapmaker J1_bed.stl
│ │ └── index.idx
│ ├── Sovol/
│ │ ├── 1.0.0.ini
│ │ ├── SV01_bed.stl
│ │ ├── SV03_bed.stl
│ │ ├── SV04_bed.stl
│ │ ├── SV05_bed.stl
│ │ ├── SV06PLUS_bed.stl
│ │ ├── SV06_bed.stl
│ │ └── index.idx
│ ├── Templates/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.0.4.ini
│ │ ├── 1.0.5.ini
│ │ └── index.idx
│ ├── TriLAB/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── 0.0.5.ini
│ │ ├── 0.0.6.ini
│ │ ├── 0.0.7.ini
│ │ ├── 0.0.8.ini
│ │ ├── 0.0.9.ini
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.0.4.ini
│ │ ├── 1.0.5.ini
│ │ ├── aq_bed.stl
│ │ ├── aqp_bed.stl
│ │ ├── dq2_bed.stl
│ │ └── index.idx
│ ├── Trimaker/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── CosmosII_bed.stl
│ │ ├── NebulaCloud_bed.stl
│ │ └── index.idx
│ ├── Ultimaker/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.1.0.ini
│ │ ├── index.idx
│ │ └── ultimaker2_bed.stl
│ ├── Voron/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.0.4.ini
│ │ ├── index.idx
│ │ ├── printbed-SW-MK52.stl
│ │ ├── printbed-v0-120.stl
│ │ ├── printbed-v1-250.stl
│ │ ├── printbed-v1-300.stl
│ │ ├── printbed-v1-350.stl
│ │ ├── printbed-v2-250.stl
│ │ ├── printbed-v2-300.stl
│ │ └── printbed-v2-350.stl
│ ├── Zonestar/
│ │ ├── 1.0.0.ini
│ │ ├── bed_150.stl
│ │ ├── bed_220.stl
│ │ ├── bed_310.stl
│ │ └── index.idx
│ └── gCreate/
│ ├── 1.0.0.ini
│ ├── 1.0.1.ini
│ ├── gmax15p_bed.stl
│ ├── gmax2_bed.stl
│ └── index.idx
└── old/
├── Slic3r settings 175/
│ ├── filament/
│ │ ├── ColorFabb Brass Bronze 1.75mm.ini
│ │ ├── ColorFabb Wood Bamboo 1.75mm.ini
│ │ ├── ColorFabb XT 1.75mm.ini
│ │ ├── ColorFabb XT-CF20 1.75mm.ini
│ │ ├── Fillamentum ABS 1.75mm.ini
│ │ ├── Prusa ABS 1.75mm.ini
│ │ ├── Prusa FLEX 1.75mm.ini
│ │ ├── Prusa HIPS 1.75mm.ini
│ │ ├── Prusa PET 1.75mm.ini
│ │ ├── Prusa PLA 1.75mm.ini
│ │ ├── Taulman Bridge 1.75mm.ini
│ │ └── Taulman T-Glase 1.75mm.ini
│ ├── print/
│ │ ├── 0.05mm PLA ULTRADETAIL.ini
│ │ ├── 0.10mm DETAIL.ini
│ │ ├── 0.20mm FLEX.ini
│ │ ├── 0.20mm NORMAL.ini
│ │ └── 0.25mm DRAFT.ini
│ ├── printer/
│ │ ├── Prusa i3 1.75 FLEX.ini
│ │ └── Prusa i3 1.75.ini
│ ├── simple.ini
│ └── slic3r.ini
├── Slic3r settings 3mm/
│ ├── filament/
│ │ ├── Prusa ABS 2.85mm.ini
│ │ ├── Prusa HIPS 2.85mm.ini
│ │ ├── Prusa PET 2.85mm.ini
│ │ ├── Prusa PLA 2.85mm.ini
│ │ └── Prusa PP Flex 2.85mm.ini
│ ├── print/
│ │ ├── 0.15mm DETAIL.ini
│ │ ├── 0.20mm NORMAL.ini
│ │ ├── 0.28mm FAST.ini
│ │ └── Flex.ini
│ ├── printer/
│ │ ├── Prusa i3 Flex.ini
│ │ └── Prusa i3.ini
│ ├── simple.ini
│ └── slic3r.ini
└── Slic3r settings MK2S MK2MM and MK3/
├── filament/
│ ├── ColorFabb Brass Bronze 1.75mm.ini
│ ├── ColorFabb HT 1.75mm.ini
│ ├── ColorFabb PLA-PHA.ini
│ ├── ColorFabb Woodfil 1.75mm.ini
│ ├── ColorFabb XT 1.75mm.ini
│ ├── ColorFabb XT-CF20 1.75mm.ini
│ ├── ColorFabb nGen 1.75mm.ini
│ ├── ColorFabb nGen flex.ini
│ ├── E3D Edge.ini
│ ├── E3D PC-ABS 1.75mm.ini
│ ├── Fillamentum ABS 1.75mm.ini
│ ├── Fillamentum ASA 1.75mm.ini
│ ├── Fillamentum CPE HG100 HM100.ini
│ ├── Fillamentum Timberfil.ini
│ ├── Generic ABS 1.75mm.ini
│ ├── Generic PET 1.75mm.ini
│ ├── Generic PLA 1.75mm.ini
│ ├── Polymaker PC-Max.ini
│ ├── Primavalue PVA.ini
│ ├── Prusa ABS 1.75mm.ini
│ ├── Prusa HIPS 1.75mm.ini
│ ├── Prusa PET 1.75mm.ini
│ ├── Prusa PLA 1.75mm.ini
│ ├── SemiFlex or Flexfill 98A.ini
│ ├── Taulman Bridge 1.75mm.ini
│ ├── Taulman T-Glase 1.75mm.ini
│ ├── Verbatim BVOH.ini
│ └── Verbatim PP.ini
├── print/
│ ├── 0.05mm DETAIL 0.25 nozzle.ini
│ ├── 0.05mm DETAIL MK3.ini
│ ├── 0.05mm DETAIL.ini
│ ├── 0.10mm DETAIL 0.25 nozzle.ini
│ ├── 0.10mm DETAIL MK3.ini
│ ├── 0.10mm DETAIL.ini
│ ├── 0.15mm 100mms Linear Advance.ini
│ ├── 0.15mm OPTIMAL 0.25 nozzle.ini
│ ├── 0.15mm OPTIMAL 0.6 nozzle.ini
│ ├── 0.15mm OPTIMAL MK3.ini
│ ├── 0.15mm OPTIMAL SOLUBLE FULL.ini
│ ├── 0.15mm OPTIMAL SOLUBLE INTERFACE.ini
│ ├── 0.15mm OPTIMAL.ini
│ ├── 0.20mm 100mms Linear Advance.ini
│ ├── 0.20mm NORMAL 0.6 nozzle.ini
│ ├── 0.20mm NORMAL MK3.ini
│ ├── 0.20mm NORMAL SOLUBLE FULL.ini
│ ├── 0.20mm NORMAL SOLUBLE INTERFACE.ini
│ ├── 0.20mm NORMAL.ini
│ ├── 0.35mm FAST 0.6 nozzle.ini
│ ├── 0.35mm FAST MK3.ini
│ ├── 0.35mm FAST sol full 0.6 nozzle.ini
│ ├── 0.35mm FAST sol int 0.6 nozzle.ini
│ └── 0.35mm FAST.ini
├── printer/
│ ├── Original Prusa i3 MK2 0.25 nozzle.ini
│ ├── Original Prusa i3 MK2 0.6 nozzle.ini
│ ├── Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini
│ ├── Original Prusa i3 MK2 MM Single Mode.ini
│ ├── Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini
│ ├── Original Prusa i3 MK2 MultiMaterial.ini
│ ├── Original Prusa i3 MK2.ini
│ └── Original Prusa i3 MK3.ini
└── slic3r.ini
================================================
FILE CONTENTS
================================================
================================================
FILE: License
================================================
GNU AFFERO GENERAL PUBLIC LICENSE
Version 3, 19 November 2007
Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU Affero General Public License is a free, copyleft license for
software and other kinds of works, specifically designed to ensure
cooperation with the community in the case of network server software.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
our General Public Licenses are intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
Developers that use our General Public Licenses protect your rights
with two steps: (1) assert copyright on the software, and (2) offer
you this License which gives you legal permission to copy, distribute
and/or modify the software.
A secondary benefit of defending all users' freedom is that
improvements made in alternate versions of the program, if they
receive widespread use, become available for other developers to
incorporate. Many developers of free software are heartened and
encouraged by the resulting cooperation. However, in the case of
software used on network servers, this result may fail to come about.
The GNU General Public License permits making a modified version and
letting the public access it on a server without ever releasing its
source code to the public.
The GNU Affero General Public License is designed specifically to
ensure that, in such cases, the modified source code becomes available
to the community. It requires the operator of a network server to
provide the source code of the modified version running there to the
users of that server. Therefore, public use of a modified version, on
a publicly accessible server, gives the public access to the source
code of the modified version.
An older license, called the Affero General Public License and
published by Affero, was designed to accomplish similar goals. This is
a different license, not a version of the Affero GPL, but Affero has
released a new version of the Affero GPL which permits relicensing under
this license.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU Affero General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Remote Network Interaction; Use with the GNU General Public License.
Notwithstanding any other provision of this License, if you modify the
Program, your modified version must prominently offer all users
interacting with it remotely through a computer network (if your version
supports such interaction) an opportunity to receive the Corresponding
Source of your version by providing access to the Corresponding Source
from a network server at no charge, through some standard or customary
means of facilitating copying of software. This Corresponding Source
shall include the Corresponding Source for any work covered by version 3
of the GNU General Public License that is incorporated pursuant to the
following paragraph.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the work with which it is combined will remain governed by version
3 of the GNU General Public License.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU Affero General Public License from time to time. Such new versions
will be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU Affero General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU Affero General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU Affero General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published
by the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Affero General Public License for more details.
You should have received a copy of the GNU Affero General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If your software can interact with users remotely through a computer
network, you should also make sure that it provides a way for users to
get its source. For example, if your program is a web application, its
interface could display a "Source" link that leads users to an archive
of the code. There are many ways you could offer source, and different
solutions will be better for different programs; see section 13 for the
specific requirements.
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU AGPL, see
<https://www.gnu.org/licenses/>.
================================================
FILE: README.md
================================================
# PrusaSlicer - settings
This repository is no longer used for __PrusaSlicer 2.8.0 and newer__. New repositories are listed below.
__Prusa3D FDM printers:__
* https://github.com/prusa3d/PrusaSlicer-settings-prusa-fff
__Prusa3D SLA printers:__
* https://github.com/prusa3d/PrusaSlicer-settings-prusa-sla
__Non-Prusa3D FDM printers:__
* https://github.com/prusa3d/PrusaSlicer-settings-non-prusa-fff
__Non-Prusa3D SLA printers:__
* https://github.com/prusa3d/PrusaSlicer-settings-non-prusa-sla
## ---
### Applicable since Slic3r PE 1.40.0
PrusaSlicer settings are present in the `live` directory. The structure is as follows:
`live / {vendor name} / {bundle version}.ini`
Each bundle contains complete configuration of relevant printers, filaments and prints options.
Along with them is an index file, which Slic3r reads and uses to find out which version is the newest compatible:
`live / {vendor name} / index.idx`
Slic3r downloads these setting bundles automatically (unless updating is disabled), and so there should be no need to install them by hand.
## Settings for previous / legacy Slic3r versions
This project contains the Slic3r profiles for the 3D printers produced by Prusa Research https://www.prusa3d.com/
* [Slic3r settings MK2 - Settings for the Original Prusa i3 MK2 & MK2S & MK2MM & MK3](https://github.com/prusa3d/Slic3r-settings/tree/master/old/Slic3r%20settings%20MK2S%20MK2MM%20and%20MK3)
* [Slic3r settings 175 - Settings for the Prusa i3 with a 1.75mm filament extruder](https://github.com/prusa3d/Slic3r-settings/tree/master/old/Slic3r%20settings%20175)
* [Slic3r settings 3mm - Settings for the Prusa i3 with a 3mm filament extruder](https://github.com/prusa3d/Slic3r-settings/tree/master/old/Slic3r%20settings%203mm)
To apply these settings, you have to copy the particular github folder
([Slic3r settings MK2, MK2S, MK2MM and MK3](https://github.com/prusa3d/Slic3r-settings/tree/master/Slic3r%20settings%20MK2S%20MK2MM%20and%20MK3) /
[Slic3r settings 175](https://github.com/prusa3d/Slic3r-settings/tree/master/old/Slic3r%20settings%20175) /
[Slic3r settings 3mm](https://github.com/prusa3d/Slic3r-settings/tree/master/old/Slic3r%20settings%203mm))
into a local folder, where Slic3r will find it. The destination depends on your operating system and Slic3r version:
__Slic3r PE 1.38.4 and later__
* Windows: "C:\Users\your_user_name\AppData\Roaming\Slic3rPE" or "C:\Documents and Settings\your_user_name\Application Data\Slic3rPE"
* Mac: ~/Library/Application\ Support/Slic3rPE/
* Unix / Linux: "~/.Slic3rPE/"
__All other versions__
* Windows: "C:\Users\your_user_name\AppData\Roaming\Slic3r\" or "C:\Documents and Settings\your_user_name\Application Data\Slic3r\"
* Mac: "~/Library/Application Support/Slic3r/"
* Unix / Linux: "~/.Slic3r/"
In case you installed the Prusa3D Windows drivers package, the Start menu is filled in with Slic3r shortcuts. These shortcuts are stored in "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Prusa3D" and they point Slic3r to the particular settings folder using the --DataDir switch.
* "C:\Users\Public\Documents\Prusa3D\Slic3r settings MK2" for the MK2 & MK2S &MK2MM & MK3
* "C:\Users\Public\Documents\Prusa3D\Slic3r settings 175" for the legacy i3 with a 1.75mm extruder
* "C:\Users\Public\Documents\Prusa3D\Slic3r settings 3mm" for the legacy i3 with a 3mm filament extruder
Therefore if you installed the Windows drivers package from Prusa3D, you may as well extract the whole ([Slic3r settings](https://github.com/prusa3d/Slic3r-settings/tree/master/) to "C:\Users\Public\Documents\Prusa3D\".
================================================
FILE: live/Anker/1.0.0.ini
================================================
# Print profiles for the AnkerMake printers.
# https://github.com/prusa3d/PrusaSlicer/pull/9075 by @just-trey
[vendor]
# Vendor name will be shown by the Config Wizard.
name = Anker
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.0.0
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anker/
# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
[printer_model:M5]
name = AnkerMake M5
variants = 0.4
technology = FFF
family = AnkerMake
bed_model = M5-bed.stl
bed_texture = M5-texture.svg
default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 2500
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 150
brim_separation = 0.1
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
complete_objects = 0
default_acceleration = 2500
dont_support_bridges = 1
elefant_foot_compensation = 0.1
ensure_vertical_shell_thickness = 1
external_perimeter_speed = 150
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 30
extruder_clearance_radius = 45
fill_angle = 45
fill_density = 15%
fill_pattern = cubic
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 200%
first_layer_speed = 50%
first_layer_speed_over_raft = 30
gap_fill_enabled = 1
gap_fill_speed = 150
gcode_comments = 0
infill_acceleration = 2500
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 23%
infill_speed = 250
interface_shells = 0
max_print_speed = 250
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes =
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{digits(layer_height,1,2)}mm_{filament_type[0]}_{printer_model}.gcode
overhangs = 1
perimeter_acceleration = 2500
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_generator = arachne
perimeter_speed = 250
perimeters = 3
post_process =
print_settings_id =
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 3
skirt_height = 1
skirts = 3
small_perimeter_speed = 150
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_speed = 175
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 125
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thick_bridges = 1
thin_walls = 0
top_solid_infill_speed = 150
travel_speed = 300
travel_speed_z = 10
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0
[print:*0.08mm*]
inherits = *common*
layer_height = 0.08
first_layer_height = 0.12
bottom_solid_layers = 9
top_solid_layers = 11
bridge_flow_ratio = 0.70
[print:*0.10mm*]
inherits = *common*
layer_height = 0.10
first_layer_height = 0.14
bottom_solid_layers = 7
top_solid_layers = 9
bridge_flow_ratio = 0.70
[print:*0.12mm*]
inherits = *common*
layer_height = 0.12
first_layer_height = 0.16
bottom_solid_layers = 6
top_solid_layers = 7
bridge_flow_ratio = 0.70
[print:*0.16mm*]
inherits = *common*
layer_height = 0.16
first_layer_height = 0.20
bottom_solid_layers = 5
top_solid_layers = 7
bridge_flow_ratio = 0.85
[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
first_layer_height = 0.24
bottom_solid_layers = 4
top_solid_layers = 5
[print:*0.24mm*]
inherits = *common*
layer_height = 0.24
first_layer_height = 0.28
bottom_solid_layers = 3
top_solid_layers = 4
[print:*0.28mm*]
inherits = *common*
layer_height = 0.28
first_layer_height = 0.28
bottom_solid_layers = 3
top_solid_layers = 4
[print:0.08 mm SUPERDETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.08mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.10 mm HIGHDETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.10mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.12 mm DETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.12mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.16 mm OPTIMAL (0.4 mm nozzle) @ANKER]
inherits = *0.16mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.20 mm NORMAL (0.4 mm nozzle) @ANKER]
inherits = *0.20mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.24 mm DRAFT (0.4 mm nozzle) @ANKER]
inherits = *0.24mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.28 mm SUPERDRAFT (0.4 mm nozzle) @ANKER]
inherits = *0.28mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[filament:*common*]
cooling = 0
compatible_printers =
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 30
slowdown_below_layer_time = 8
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANKERMAKE.*/
[filament:*PLA*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 210
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 2
temperature = 205
[filament:*PLA+*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 220
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 2
temperature = 210
[filament:*PET*]
inherits = *common*
bed_temperature = 70
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature = 70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 50
bridge_fan_speed = 100
temperature = 240
[filament:*ABS*]
inherits = *common*
bed_temperature = 90
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 100
first_layer_temperature = 245
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 245
[filament:Generic PLA @ANKER]
inherits = *PLA*
filament_vendor = Generic
[filament:Generic PLA+ @ANKER]
inherits = *PLA+*
filament_vendor = Generic
[filament:Generic PETG @ANKER]
inherits = *PET*
filament_vendor = Generic
[filament:Generic ABS @ANKER]
inherits = *ABS*
first_layer_bed_temperature = 90
bed_temperature = 90
filament_vendor = Generic
# Common printer preset
[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}
between_objects_gcode =
pause_print_gcode =
deretract_speed = 60
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 2500
machine_max_acceleration_extruding = 2500
machine_max_acceleration_retracting = 2500
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 2500
machine_max_acceleration_y = 2500
machine_max_acceleration_z = 2500
machine_max_feedrate_e = 100
machine_max_feedrate_x = 300
machine_max_feedrate_y = 300
machine_max_feedrate_z = 20
machine_max_jerk_e = 3
machine_max_jerk_x = 30
machine_max_jerk_y = 30
machine_max_jerk_z = 0.3
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
max_print_height = 250
printer_notes =
printer_settings_id =
retract_before_travel = 2
retract_before_wipe = 70%
retract_layer_change = 1
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
single_extruder_multi_material = 0
thumbnails = 64x64,256x256
thumbnails_format = JPG
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
default_filament_profile = "Generic PLA+ @ANKER"
start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for nozzle temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)
end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
[printer:*M5*]
inherits = *common*
bed_shape = 0x0,235-0,235x235,0x235
max_print_height = 250
printer_model = M5
retract_length = 1.25
retract_speed = 60
deretract_speed = 60
retract_before_travel = 1
retract_before_wipe = 0%
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANKERMAKE\nPRINTER_MODEL_M5
[printer:AnkerMake M5 (0.4 mm nozzle)]
inherits = *M5*
nozzle_diameter = 0.4
printer_variant = 0.4
min_layer_height = 0.08
max_layer_height = 0.32
retract_lift_above = 0.2
default_print_profile = "0.16 mm OPTIMAL (0.4 mm nozzle) @ANKER"
================================================
FILE: live/Anker/1.0.1.ini
================================================
# Print profiles for the AnkerMake printers.
# https://github.com/prusa3d/PrusaSlicer/pull/9075 by @just-trey
[vendor]
# Vendor name will be shown by the Config Wizard.
name = Anker
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.0.1
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anker/
# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
[printer_model:M5]
name = AnkerMake M5
variants = 0.4
technology = FFF
family = AnkerMake
bed_model = M5-bed.stl
bed_texture = M5-texture.svg
default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 2500
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 150
brim_separation = 0.1
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
complete_objects = 0
default_acceleration = 2500
dont_support_bridges = 1
elefant_foot_compensation = 0.1
ensure_vertical_shell_thickness = 1
external_perimeter_speed = 150
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 30
extruder_clearance_radius = 45
fill_angle = 45
fill_density = 15%
fill_pattern = cubic
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 200%
first_layer_speed = 50%
first_layer_speed_over_raft = 30
gap_fill_enabled = 1
gap_fill_speed = 150
gcode_comments = 0
infill_acceleration = 2500
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 23%
infill_speed = 250
interface_shells = 0
max_print_speed = 250
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes =
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{digits(layer_height,1,2)}mm_{filament_type[0]}_{printer_model}.gcode
overhangs = 1
perimeter_acceleration = 2500
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_generator = arachne
perimeter_speed = 250
perimeters = 3
post_process =
print_settings_id =
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 3
skirt_height = 1
skirts = 3
small_perimeter_speed = 150
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_speed = 175
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 125
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thick_bridges = 0
thin_walls = 0
top_solid_infill_speed = 150
travel_speed = 300
travel_speed_z = 10
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0
[print:*0.08mm*]
inherits = *common*
layer_height = 0.08
first_layer_height = 0.12
bottom_solid_layers = 9
top_solid_layers = 11
bridge_flow_ratio = 0.70
[print:*0.10mm*]
inherits = *common*
layer_height = 0.10
first_layer_height = 0.14
bottom_solid_layers = 7
top_solid_layers = 9
bridge_flow_ratio = 0.70
[print:*0.12mm*]
inherits = *common*
layer_height = 0.12
first_layer_height = 0.16
bottom_solid_layers = 6
top_solid_layers = 7
bridge_flow_ratio = 0.70
[print:*0.16mm*]
inherits = *common*
layer_height = 0.16
first_layer_height = 0.20
bottom_solid_layers = 5
top_solid_layers = 7
bridge_flow_ratio = 0.85
[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
first_layer_height = 0.24
bottom_solid_layers = 4
top_solid_layers = 5
[print:*0.24mm*]
inherits = *common*
layer_height = 0.24
first_layer_height = 0.28
bottom_solid_layers = 3
top_solid_layers = 4
[print:*0.28mm*]
inherits = *common*
layer_height = 0.28
first_layer_height = 0.28
bottom_solid_layers = 3
top_solid_layers = 4
[print:0.08 mm SUPERDETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.08mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.10 mm HIGHDETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.10mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.12 mm DETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.12mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.16 mm OPTIMAL (0.4 mm nozzle) @ANKER]
inherits = *0.16mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.20 mm NORMAL (0.4 mm nozzle) @ANKER]
inherits = *0.20mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.24 mm DRAFT (0.4 mm nozzle) @ANKER]
inherits = *0.24mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.28 mm SUPERDRAFT (0.4 mm nozzle) @ANKER]
inherits = *0.28mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[filament:*common*]
cooling = 0
compatible_printers =
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 30
slowdown_below_layer_time = 8
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANKERMAKE.*/
[filament:*PLA*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 210
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 2
temperature = 205
[filament:*PLA+*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 220
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 2
temperature = 210
[filament:*PET*]
inherits = *common*
bed_temperature = 70
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature = 70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 50
bridge_fan_speed = 100
temperature = 240
[filament:*ABS*]
inherits = *common*
bed_temperature = 90
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 100
first_layer_temperature = 245
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 245
[filament:Generic PLA @ANKER]
inherits = *PLA*
filament_vendor = Generic
[filament:Generic PLA+ @ANKER]
inherits = *PLA+*
filament_vendor = Generic
[filament:Generic PETG @ANKER]
inherits = *PET*
filament_vendor = Generic
[filament:Generic ABS @ANKER]
inherits = *ABS*
first_layer_bed_temperature = 90
bed_temperature = 90
filament_vendor = Generic
# Common printer preset
[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}
between_objects_gcode =
pause_print_gcode =
deretract_speed = 60
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 2500
machine_max_acceleration_extruding = 2500
machine_max_acceleration_retracting = 2500
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 2500
machine_max_acceleration_y = 2500
machine_max_acceleration_z = 2500
machine_max_feedrate_e = 100
machine_max_feedrate_x = 300
machine_max_feedrate_y = 300
machine_max_feedrate_z = 20
machine_max_jerk_e = 3
machine_max_jerk_x = 30
machine_max_jerk_y = 30
machine_max_jerk_z = 0.3
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
max_print_height = 250
printer_notes =
printer_settings_id =
retract_before_travel = 2
retract_before_wipe = 70%
retract_layer_change = 1
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
single_extruder_multi_material = 0
thumbnails = 64x64,256x256
thumbnails_format = JPG
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
default_filament_profile = "Generic PLA+ @ANKER"
start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for nozzle temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)
end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
[printer:*M5*]
inherits = *common*
bed_shape = 0x0,235-0,235x235,0x235
max_print_height = 250
printer_model = M5
retract_length = 1.25
retract_speed = 60
deretract_speed = 60
retract_before_travel = 1
retract_before_wipe = 0%
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANKERMAKE\nPRINTER_MODEL_M5
[printer:AnkerMake M5 (0.4 mm nozzle)]
inherits = *M5*
nozzle_diameter = 0.4
printer_variant = 0.4
min_layer_height = 0.08
max_layer_height = 0.32
retract_lift_above = 0.2
default_print_profile = "0.16 mm OPTIMAL (0.4 mm nozzle) @ANKER"
================================================
FILE: live/Anker/1.1.1.ini
================================================
# Print profiles for the AnkerMake printers.
[vendor]
# Vendor name will be shown by the Config Wizard.
name = AnkerMake
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.1.1
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anker/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
[printer_model:M5]
name = AnkerMake M5
variants = 0.4
technology = FFF
family = AnkerMake
bed_model = M5-bed.stl
bed_texture = M5-texture_v2.svg
thumbnail = M5_thumbnail_v2.png
default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER;
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 2500
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 50
brim_separation = 0.1
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
complete_objects = 0
default_acceleration = 2500
dont_support_bridges = 1
elefant_foot_compensation = 0.2
ensure_vertical_shell_thickness = 1
external_perimeter_speed = 150
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 30
extruder_clearance_radius = 45
extrusion_width = 0.4
external_perimeter_extrusion_width = 0.44
fill_angle = 45
fill_density = 10%
fill_pattern = grid
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.4
first_layer_speed = 50%
first_layer_speed_over_raft = 30
gap_fill_enabled = 1
gap_fill_speed = 150
gcode_comments = 0
infill_acceleration = 2500
infill_anchor = 2.5
infill_anchor_max = 12
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_extrusion_width = 0.4
infill_only_where_needed = 0
infill_overlap = 10%
infill_speed = 250
interface_shells = 0
max_print_speed = 250
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes =
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
overhangs = 1
perimeter_acceleration = 2500
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_generator = classic
perimeter_speed = 250
perimeters = 3
post_process =
print_settings_id =
raft_layers = 0
resolution = 0.01
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 3
skirt_height = 1
skirts = 3
small_perimeter_speed = 150
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 250
spiral_vase = 0
standby_temperature_delta = -5
support_material_auto = 0
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 80%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 150
support_material_synchronize_layers = 0
support_material_threshold = 55
support_material_with_sheath = 0
support_material_xy_spacing = 50%
thick_bridges = 0
thin_walls = 0
top_solid_infill_speed = 150
top_infill_extrusion_width = 0.4
top_fill_pattern = rectilinear
bottom_fill_pattern = rectilinear
travel_speed = 250
travel_speed_z = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0
[print:*0.10mm*]
inherits = *common*
layer_height = 0.10
first_layer_height = 0.10
bottom_solid_layers = 7
top_solid_layers = 9
bridge_flow_ratio = 1
[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
first_layer_height = 0.14
bottom_solid_layers = 4
top_solid_layers = 5
[print:*0.30mm*]
inherits = *common*
layer_height = 0.30
first_layer_height = 0.21
bottom_solid_layers = 3
top_solid_layers = 4
[print:0.10 mm HIGHDETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.10mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.20 mm NORMAL (0.4 mm nozzle) @ANKER]
inherits = *0.20mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
[print:0.30 mm SUPERDRAFT (0.4 mm nozzle) @ANKER]
inherits = *0.30mm*
compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
# https://www.thingiverse.com/thing:2615842
# Pay particular attention to bridging, overhangs and retractions.
# Also print the following bed adhesion test at 0.1 layer height as well:
# https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
# At least for PLA, please keep bed temp at 60, as many Creality printers do not have any ABL
# So having some leeway to get good bed adhesion is not a luxury for many users
[filament:*common*]
cooling = 0
compatible_printers =
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 30
slowdown_below_layer_time = 8
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANKERMAKE.*/
[filament:*PLA*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 230
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 200
[filament:*PLA+*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA+
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 230
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 200
[filament:*PET*]
inherits = *common*
bed_temperature = 80
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature = 80
first_layer_temperature = 260
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 50
bridge_fan_speed = 100
temperature = 260
[filament:*ABS*]
inherits = *common*
bed_temperature = 90
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 90
first_layer_temperature = 260
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 260
[filament:Generic PLA @ANKER]
inherits = *PLA*
filament_vendor = Generic
[filament:Generic PLA+ @ANKER]
inherits = *PLA+*
filament_vendor = Generic
[filament:Generic PETG @ANKER]
inherits = *PET*
filament_vendor = Generic
[filament:Generic ABS @ANKER]
inherits = *ABS*
first_layer_bed_temperature = 90
bed_temperature = 90
filament_vendor = Generic
# Common printer preset
[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}
between_objects_gcode =
pause_print_gcode =
deretract_speed = 60
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 1
remaining_times = 1
machine_max_acceleration_e = 2500
machine_max_acceleration_extruding = 2500
machine_max_acceleration_retracting = 2500
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 2500
machine_max_acceleration_y = 2500
machine_max_acceleration_z = 2500
machine_max_feedrate_e = 100
machine_max_feedrate_x = 300
machine_max_feedrate_y = 300
machine_max_feedrate_z = 20
machine_max_jerk_e = 3
machine_max_jerk_x = 15
machine_max_jerk_y = 15
machine_max_jerk_z = 0.3
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
max_print_height = 250
printer_notes =
printer_settings_id =
retract_before_travel = 3
retract_before_wipe = 0
retract_layer_change = 1
retract_length_toolchange = 4
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
single_extruder_multi_material = 0
thumbnails = 64x64,256x256
thumbnails_format = JPG
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0
default_filament_profile = Generic PLA+ @ANKER
start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\nM420 S1; restore saved Auto Bed Leveling data\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)
end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
[printer:*M5*]
inherits = *common*
bed_shape = 0x0,235-0,235x235,0x235
max_print_height = 250
printer_model = M5
retract_length = 3
retract_speed = 60
deretract_speed = 60
retract_before_travel = 3
retract_before_wipe = 0%
printer_notes = Don not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANKERMAKE\nPRINTER_MODEL_M5
[printer:AnkerMake M5 (0.4 mm nozzle)]
inherits = *M5*
nozzle_diameter = 0.4
printer_variant = 0.4
min_layer_height = 0.08
max_layer_height = 0.32
retract_lift_above = 0
default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
================================================
FILE: live/Anker/1.1.2.ini
================================================
# Print profiles for the AnkerMake printers.
[vendor]
# Vendor name will be shown by the Config Wizard.
name = AnkerMake
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.1.2
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anker/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
[printer_model:M5]
name = AnkerMake M5
variants = 0.4
technology = FFF
family = AnkerMake
bed_model = M5-bed.stl
bed_texture = M5-texture_v2.svg
thumbnail = M5_thumbnail_v2.png
default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER;
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
[printer_model:M5C]
name = AnkerMake M5C
variants = 0.4
technology = FFF
family = AnkerMake
bed_model = M5C-bed.stl
bed_texture = M5C-texture_v2.svg
thumbnail = M5C_thumbnail_v2.png
default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER;
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 2500
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 50
brim_separation = 0.1
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
complete_objects = 0
default_acceleration = 2500
dont_support_bridges = 1
elefant_foot_compensation = 0.2
ensure_vertical_shell_thickness = 1
external_perimeter_speed = 150
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 30
extruder_clearance_radius = 45
extrusion_width = 0.4
external_perimeter_extrusion_width = 0.44
fill_angle = 45
fill_density = 10%
fill_pattern = grid
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.4
first_layer_speed = 50%
first_layer_speed_over_raft = 30
gap_fill_enabled = 1
gap_fill_speed = 150
gcode_comments = 0
infill_acceleration = 2500
infill_anchor = 2.5
infill_anchor_max = 12
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_extrusion_width = 0.4
infill_only_where_needed = 0
infill_overlap = 10%
infill_speed = 250
interface_shells = 0
max_print_speed = 250
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes =
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
overhangs = 1
perimeter_acceleration = 2500
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_generator = classic
perimeter_speed = 250
perimeters = 3
post_process =
print_settings_id =
raft_layers = 0
resolution = 0.01
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 3
skirt_height = 1
skirts = 3
small_perimeter_speed = 150
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 250
spiral_vase = 0
standby_temperature_delta = -5
support_material_auto = 0
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 80%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 150
support_material_synchronize_layers = 0
support_material_threshold = 55
support_material_with_sheath = 0
support_material_xy_spacing = 50%
thick_bridges = 0
thin_walls = 0
top_solid_infill_speed = 150
top_infill_extrusion_width = 0.4
top_fill_pattern = rectilinear
bottom_fill_pattern = rectilinear
travel_speed = 250
travel_speed_z = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0
[print:*0.10mm*]
inherits = *common*
layer_height = 0.10
first_layer_height = 0.10
bottom_solid_layers = 7
top_solid_layers = 9
bridge_flow_ratio = 1
[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
first_layer_height = 0.14
bottom_solid_layers = 4
top_solid_layers = 5
[print:*0.30mm*]
inherits = *common*
layer_height = 0.30
first_layer_height = 0.21
bottom_solid_layers = 3
top_solid_layers = 4
[print:0.10 mm HIGHDETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.10mm*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
[print:0.20 mm NORMAL (0.4 mm nozzle) @ANKER]
inherits = *0.20mm*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
[print:0.30 mm SUPERDRAFT (0.4 mm nozzle) @ANKER]
inherits = *0.30mm*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
[print:*common-M5C*]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = rectilinear
bottom_solid_min_thickness = 0.8
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 30
brim_separation = 0.1
brim_type = no_brim
brim_width = 8
complete_objects = 0
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 1
external_perimeter_extrusion_width = 0.44
external_perimeter_speed = 75
external_perimeters_first = 1
extra_perimeters = 1
extra_perimeters_on_overhangs = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.4
fill_angle = 45
fill_density = 10%
fill_pattern = grid
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_speed = 50
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 75
gcode_comments = 0
gcode_label_objects = 0
gcode_resolution = 0.0125
gcode_substitutions = "(G28 ;Home.*$)";"${1}\\nM4899 T3\\n";;";S-Curve"
infill_acceleration = 4000
infill_anchor = 30
infill_anchor_max = 60
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.4
infill_first = 0
infill_overlap = 25%
infill_speed = 250
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
max_print_speed = 500
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 0
mmu_segmented_region_max_width = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
overhang_speed_0 = 25
overhang_speed_1 = 55
overhang_speed_2 = 55
overhang_speed_3 = 100%
overhangs = 1
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_generator = classic
perimeter_speed = 200
post_process =
print_settings_id =
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 0
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 1
skirt_distance = 6
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 75
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 100
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 90
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.3
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 1.333
support_material_speed = 150
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 0.8
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 0
thin_walls = 1
threads = 10
top_fill_pattern = rectilinear
top_infill_extrusion_width = 0.2
top_solid_infill_speed = 50
top_solid_min_thickness = 0.8
travel_speed = 500
travel_speed_z = 10
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:Precision - M5C (0.4 mm nozzle) @ANKER]
inherits = *common-M5C*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_PRECISION).*/ and nozzle_diameter[0]==0.4
first_layer_height = 0.14
layer_height = 0.16
top_solid_layers = 5
bottom_solid_layers = 3
perimeters = 2
bridge_acceleration = 500
default_acceleration = 4000
external_perimeter_acceleration = 3000
perimeter_acceleration = 3000
top_solid_infill_acceleration = 2500
travel_acceleration = 4000
solid_infill_acceleration = 2500
[print:Normal - M5C (0.4 mm nozzle) @ANKER]
inherits = *common-M5C*
notes = PRINT_COMPATIBLE\n P_NORMAL\n F_PLA__Basic\n
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_NORMAL).*/ and nozzle_diameter[0]==0.4
first_layer_height = 0.14
layer_height = 0.2
top_solid_layers = 4
bottom_solid_layers = 4
perimeters = 3
bridge_acceleration = 500
default_acceleration = 2500
external_perimeter_acceleration = 2500
external_perimeter_speed = 150
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_speed = 50
gap_fill_speed = 75
infill_acceleration = 2500
infill_speed = 250
max_print_speed = 250
overhang_speed_0 = 15
overhang_speed_1 = 20
overhang_speed_2 = 30
overhang_speed_3 = 30
perimeter_acceleration = 2500
perimeter_speed = 250
small_perimeter_speed = 75
solid_infill_acceleration = 2500
solid_infill_speed = 150
top_solid_infill_acceleration = 2500
top_solid_infill_speed = 150
travel_acceleration = 2500
travel_speed = 250
travel_speed_z = 10
[print:Fast - M5C (0.4 mm nozzle) @ANKER]
inherits = *common-M5C*
notes = PRINT_COMPATIBLE\n P_FAST\n F_PLA__Basic\n
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_FAST).*/ and nozzle_diameter[0]==0.4
layer_height = 0.25
first_layer_height = 0.14
perimeters = 2
top_solid_layers = 4
bottom_solid_layers = 3
external_perimeter_acceleration = 3000
perimeter_acceleration = 5000
top_solid_infill_acceleration = 4000
solid_infill_acceleration = 4000
infill_acceleration = 5000
bridge_acceleration = 500
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
travel_acceleration = 5000
default_acceleration = 5000
# Speed
perimeter_speed = 250
small_perimeter_speed = 75
external_perimeter_speed = 150
infill_speed = 270
solid_infill_speed = 100
top_solid_infill_speed = 100
support_material_speed = 150
support_material_interface_speed = 100%
bridge_speed = 20
gap_fill_speed = 75
overhang_speed_0 = 15
overhang_speed_1 = 20
overhang_speed_2 = 30
overhang_speed_3 = 30
travel_speed = 500
travel_speed_z = 10
first_layer_speed = 50
first_layer_speed_over_raft = 30
max_print_speed = 500
# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
# https://www.thingiverse.com/thing:2615842
# Pay particular attention to bridging, overhangs and retractions.
# Also print the following bed adhesion test at 0.1 layer height as well:
# https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
# At least for PLA, please keep bed temp at 60, as many Creality printers do not have any ABL
# So having some leeway to get good bed adhesion is not a luxury for many users
[filament:*common*]
cooling = 1
compatible_printers =
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 30
slowdown_below_layer_time = 8
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANKERMAKE.*/
[filament:*PLA*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 230
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 200
[filament:*PLA+*]
inherits = *common*
bed_temperature = 65
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA+
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 65
first_layer_temperature = 230
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 200
[filament:*PET*]
inherits = *common*
bed_temperature = 80
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature = 80
first_layer_temperature = 255
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 50
bridge_fan_speed = 100
temperature = 255
[filament:*ABS*]
inherits = *common*
bed_temperature = 90
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 90
first_layer_temperature = 255
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 255
[filament:Generic PLA @ANKER]
inherits = *PLA*
filament_vendor = Generic
[filament:Generic PLA+ @ANKER]
inherits = *PLA+*
filament_vendor = Generic
[filament:Generic PETG @ANKER]
inherits = *PET*
filament_vendor = Generic
[filament:Generic ABS @ANKER]
inherits = *ABS*
first_layer_bed_temperature = 90
bed_temperature = 90
filament_vendor = Generic
# Common printer preset
[printer:*common*]
printer_vendor = AnkerMake
# General
## Size and coordinates
max_print_height = 250
z_offset = 0
## Capabilities
#extruders_count = 1
single_extruder_multi_material = 0
## Firmware
gcode_flavor = marlin2
thumbnails = 256x256
thumbnails_format = PNG
silent_mode = 0
remaining_times = 1
## Advanced
use_relative_e_distances = 1
use_firmware_retraction = 0
use_volumetric_e = 0
variable_layer_height = 1
# Custom G-code
start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}\n
autoemit_temperature_commands = 1
end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n;LAYER:{layer_num+1}
layer_gcode = ;AFTER_LAYER_CHANGE\nG92 E0
toolchange_gcode =
between_objects_gcode =
color_change_gcode = M600
pause_print_gcode = M601
template_custom_gcode =
# Machine limits
## General
### machine_limits_usage = emit_to_gcode time_estimate_only ignore
machine_limits_usage = time_estimate_only
## Maximum feedrates
machine_max_feedrate_e = 100
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 50
## Maximum accelerations
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 10000
machine_max_acceleration_travel = 10000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 10000
## Jerk limits
machine_max_jerk_x = 15, 15
machine_max_jerk_y = 15, 15
machine_max_jerk_z = 0.3, 0.3
machine_max_jerk_e = 3, 3
machine_min_extruding_rate = 0, 0
machine_min_travel_rate = 0, 0
# Extruder 1 2 3 4 5 6
## Size
nozzle_diameter = 0.4
## Preview
extruder_colour = #9BE198
## Layer height limits
min_layer_height = 0.08
max_layer_height = 0.32
## Position (for multi-extruder printers)
extruder_offset = 0x0
## Retraction
retract_length = 3
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_speed = 60
deretract_speed = 0
retract_restart_extra = 0
retract_before_travel = 0.8
retract_layer_change = 1
wipe = 0
retract_before_wipe = 0%
## Retraction when tool is disabled (advanced settings for multi-extruder setups)
retract_length_toolchange = 4
retract_restart_extra_toolchange = 0
# Notes
printer_notes = Base printer notes is EMPTY!
default_print_profile =
default_filament_profile = Generic PLA+ @ANKER
printer_technology = FFF
printer_settings_id =
[printer:*M5*]
inherits = *common*
bed_shape = 0x0,235-0,235x235,0x235
max_print_height = 250
printer_model = M5
retract_length = 3
retract_speed = 60
deretract_speed = 60
retract_before_travel = 3
retract_before_wipe = 0%
printer_notes = MACHINE_M5_\n PRINTER_VENDOR_ANKERMAKE\n PRINTER_MODEL_M5\n
[printer:*M5C*]
inherits = *common*
bed_shape = 0x0,220x0,220x220,0x220
max_print_height = 250
printer_model = M5C
retract_length = 0.8
retract_speed = 60
deretract_speed = 60
retract_before_travel = 3
retract_before_wipe = 0%
wipe = 1
printer_notes = MACHINE_M5C_\n PRINTER_VENDOR_ANKERMAKE\n P_PRECISION P_NORMAL P_FAST\n
[printer:AnkerMake M5 (0.4 mm nozzle)]
inherits = *M5*
nozzle_diameter = 0.4
printer_variant = 0.4
min_layer_height = 0.08
max_layer_height = 0.32
retract_lift_above = 0
default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
[printer:AnkerMake M5C (0.4 mm nozzle)]
inherits = *M5C*
nozzle_diameter = 0.4
printer_variant = 0.4
min_layer_height = 0.08
max_layer_height = 0.32
retract_lift_above = 0
default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
================================================
FILE: live/Anker/1.1.3.ini
================================================
# Print profiles for the AnkerMake printers.
[vendor]
# Vendor name will be shown by the Config Wizard.
name = AnkerMake
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.1.3
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anker/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
[printer_model:M5]
name = AnkerMake M5
variants = 0.4
technology = FFF
family = AnkerMake
bed_model = M5-bed.stl
bed_texture = M5-texture_v2.svg
thumbnail = M5_thumbnail_v2.png
default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER;
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
[printer_model:M5C]
name = AnkerMake M5C
variants = 0.4
technology = FFF
family = AnkerMake
bed_model = M5C-bed.stl
bed_texture = M5C-texture_v2.svg
thumbnail = M5C_thumbnail_v2.png
default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER;
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 2500
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 50
brim_separation = 0.1
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
complete_objects = 0
default_acceleration = 2500
dont_support_bridges = 1
elefant_foot_compensation = 0.2
ensure_vertical_shell_thickness = 1
external_perimeter_speed = 150
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 30
extruder_clearance_radius = 45
extrusion_width = 0.4
external_perimeter_extrusion_width = 0.44
fill_angle = 45
fill_density = 10%
fill_pattern = grid
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.4
first_layer_speed = 50%
first_layer_speed_over_raft = 30
gap_fill_enabled = 1
gap_fill_speed = 150
gcode_comments = 0
infill_acceleration = 2500
infill_anchor = 2.5
infill_anchor_max = 12
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_extrusion_width = 0.4
infill_only_where_needed = 0
infill_overlap = 10%
infill_speed = 250
interface_shells = 0
max_print_speed = 250
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes =
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
overhangs = 1
perimeter_acceleration = 2500
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_generator = classic
perimeter_speed = 250
perimeters = 3
post_process =
print_settings_id =
raft_layers = 0
resolution = 0.01
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 3
skirt_height = 1
skirts = 3
small_perimeter_speed = 150
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 250
spiral_vase = 0
standby_temperature_delta = -5
support_material_auto = 0
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 80%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 150
support_material_synchronize_layers = 0
support_material_threshold = 55
support_material_with_sheath = 0
support_material_xy_spacing = 50%
thick_bridges = 0
thin_walls = 0
top_solid_infill_speed = 150
top_infill_extrusion_width = 0.4
top_fill_pattern = rectilinear
bottom_fill_pattern = rectilinear
travel_speed = 250
travel_speed_z = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0
[print:*0.10mm*]
inherits = *common*
layer_height = 0.10
first_layer_height = 0.10
bottom_solid_layers = 7
top_solid_layers = 9
bridge_flow_ratio = 1
[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
first_layer_height = 0.14
bottom_solid_layers = 4
top_solid_layers = 5
[print:*0.30mm*]
inherits = *common*
layer_height = 0.30
first_layer_height = 0.21
bottom_solid_layers = 3
top_solid_layers = 4
[print:0.10 mm HIGHDETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.10mm*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
[print:0.20 mm NORMAL (0.4 mm nozzle) @ANKER]
inherits = *0.20mm*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
[print:0.30 mm SUPERDRAFT (0.4 mm nozzle) @ANKER]
inherits = *0.30mm*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4
[print:*common-M5C*]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = rectilinear
bottom_solid_min_thickness = 0.8
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 30
brim_separation = 0.1
brim_type = no_brim
brim_width = 8
complete_objects = 0
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 1
external_perimeter_extrusion_width = 0.44
external_perimeter_speed = 75
external_perimeters_first = 1
extra_perimeters = 1
extra_perimeters_on_overhangs = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.4
fill_angle = 45
fill_density = 10%
fill_pattern = grid
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_speed = 50
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 75
gcode_comments = 0
gcode_label_objects = 0
gcode_resolution = 0.0125
gcode_substitutions = "(G28 ;Home.*$)";"${1}\\nM4899 T3\\n";;";S-Curve"
infill_acceleration = 4000
infill_anchor = 30
infill_anchor_max = 60
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.4
infill_first = 0
infill_overlap = 25%
infill_speed = 250
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
max_print_speed = 500
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 0
mmu_segmented_region_max_width = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
overhang_speed_0 = 25
overhang_speed_1 = 55
overhang_speed_2 = 55
overhang_speed_3 = 100%
overhangs = 1
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_generator = classic
perimeter_speed = 200
post_process =
print_settings_id =
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 0
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 1
skirt_distance = 6
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 75
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 100
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 90
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.3
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 1.333
support_material_speed = 150
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 0.8
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 0
thin_walls = 1
threads = 10
top_fill_pattern = rectilinear
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 50
top_solid_min_thickness = 0.8
travel_speed = 500
travel_speed_z = 10
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:Precision - M5C (0.4 mm nozzle) @ANKER]
inherits = *common-M5C*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_PRECISION).*/ and nozzle_diameter[0]==0.4
first_layer_height = 0.14
layer_height = 0.16
top_solid_layers = 5
bottom_solid_layers = 3
perimeters = 2
bridge_acceleration = 500
default_acceleration = 4000
external_perimeter_acceleration = 3000
perimeter_acceleration = 3000
top_solid_infill_acceleration = 2500
travel_acceleration = 4000
solid_infill_acceleration = 2500
[print:Normal - M5C (0.4 mm nozzle) @ANKER]
inherits = *common-M5C*
notes = PRINT_COMPATIBLE\n P_NORMAL\n F_PLA__Basic\n
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_NORMAL).*/ and nozzle_diameter[0]==0.4
first_layer_height = 0.14
layer_height = 0.2
top_solid_layers = 4
bottom_solid_layers = 4
perimeters = 3
bridge_acceleration = 500
default_acceleration = 2500
external_perimeter_acceleration = 2500
external_perimeter_speed = 150
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_speed = 50
gap_fill_speed = 75
infill_acceleration = 2500
infill_speed = 250
max_print_speed = 250
overhang_speed_0 = 15
overhang_speed_1 = 20
overhang_speed_2 = 30
overhang_speed_3 = 30
perimeter_acceleration = 2500
perimeter_speed = 250
small_perimeter_speed = 75
solid_infill_acceleration = 2500
solid_infill_speed = 150
top_solid_infill_acceleration = 2500
top_solid_infill_speed = 150
travel_acceleration = 2500
travel_speed = 250
travel_speed_z = 10
[print:Fast - M5C (0.4 mm nozzle) @ANKER]
inherits = *common-M5C*
notes = PRINT_COMPATIBLE\n P_FAST\n F_PLA__Basic\n
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_FAST).*/ and nozzle_diameter[0]==0.4
layer_height = 0.25
first_layer_height = 0.14
perimeters = 2
top_solid_layers = 4
bottom_solid_layers = 3
external_perimeter_acceleration = 3000
perimeter_acceleration = 5000
top_solid_infill_acceleration = 4000
solid_infill_acceleration = 4000
infill_acceleration = 5000
bridge_acceleration = 500
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
travel_acceleration = 5000
default_acceleration = 5000
# Speed
perimeter_speed = 250
small_perimeter_speed = 75
external_perimeter_speed = 150
infill_speed = 270
solid_infill_speed = 100
top_solid_infill_speed = 100
support_material_speed = 150
support_material_interface_speed = 100%
bridge_speed = 20
gap_fill_speed = 75
overhang_speed_0 = 15
overhang_speed_1 = 20
overhang_speed_2 = 30
overhang_speed_3 = 30
travel_speed = 500
travel_speed_z = 10
first_layer_speed = 50
first_layer_speed_over_raft = 30
max_print_speed = 500
# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
# https://www.thingiverse.com/thing:2615842
# Pay particular attention to bridging, overhangs and retractions.
# Also print the following bed adhesion test at 0.1 layer height as well:
# https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
# At least for PLA, please keep bed temp at 60, as many Creality printers do not have any ABL
# So having some leeway to get good bed adhesion is not a luxury for many users
[filament:*common*]
cooling = 1
compatible_printers =
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 30
slowdown_below_layer_time = 8
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANKERMAKE.*/
[filament:*PLA*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 230
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 200
[filament:*PLA+*]
inherits = *common*
bed_temperature = 65
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA+
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 65
first_layer_temperature = 230
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 200
[filament:*PET*]
inherits = *common*
bed_temperature = 80
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature = 80
first_layer_temperature = 255
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 50
bridge_fan_speed = 100
temperature = 255
[filament:*ABS*]
inherits = *common*
bed_temperature = 90
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 90
first_layer_temperature = 255
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 255
[filament:Generic PLA @ANKER]
inherits = *PLA*
filament_vendor = Generic
[filament:Generic PLA+ @ANKER]
inherits = *PLA+*
filament_vendor = Generic
[filament:Generic PETG @ANKER]
inherits = *PET*
filament_vendor = Generic
[filament:Generic ABS @ANKER]
inherits = *ABS*
first_layer_bed_temperature = 90
bed_temperature = 90
filament_vendor = Generic
# Common printer preset
[printer:*common*]
printer_vendor = AnkerMake
# General
## Size and coordinates
max_print_height = 250
z_offset = 0
## Capabilities
#extruders_count = 1
single_extruder_multi_material = 0
## Firmware
gcode_flavor = marlin2
thumbnails = 256x256
thumbnails_format = PNG
silent_mode = 0
remaining_times = 1
## Advanced
use_relative_e_distances = 1
use_firmware_retraction = 0
use_volumetric_e = 0
variable_layer_height = 1
# Custom G-code
start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}\n
autoemit_temperature_commands = 1
end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n;LAYER:{layer_num+1}
layer_gcode = ;AFTER_LAYER_CHANGE\nG92 E0
toolchange_gcode =
between_objects_gcode =
color_change_gcode = M600
pause_print_gcode = M601
template_custom_gcode =
# Machine limits
## General
### machine_limits_usage = emit_to_gcode time_estimate_only ignore
machine_limits_usage = time_estimate_only
## Maximum feedrates
machine_max_feedrate_e = 100
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 50
## Maximum accelerations
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 10000
machine_max_acceleration_travel = 10000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 10000
## Jerk limits
machine_max_jerk_x = 15, 15
machine_max_jerk_y = 15, 15
machine_max_jerk_z = 0.3, 0.3
machine_max_jerk_e = 3, 3
machine_min_extruding_rate = 0, 0
machine_min_travel_rate = 0, 0
# Extruder 1 2 3 4 5 6
## Size
nozzle_diameter = 0.4
## Preview
extruder_colour = #9BE198
## Layer height limits
min_layer_height = 0.08
max_layer_height = 0.32
## Position (for multi-extruder printers)
extruder_offset = 0x0
## Retraction
retract_length = 3
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_speed = 60
deretract_speed = 0
retract_restart_extra = 0
retract_before_travel = 0.8
retract_layer_change = 1
wipe = 0
retract_before_wipe = 0%
## Retraction when tool is disabled (advanced settings for multi-extruder setups)
retract_length_toolchange = 4
retract_restart_extra_toolchange = 0
# Notes
printer_notes = Base printer notes is EMPTY!
default_print_profile =
default_filament_profile = Generic PLA+ @ANKER
printer_technology = FFF
printer_settings_id =
[printer:*M5*]
inherits = *common*
bed_shape = 0x0,235-0,235x235,0x235
max_print_height = 250
printer_model = M5
retract_length = 3
retract_speed = 60
deretract_speed = 60
retract_before_travel = 3
retract_before_wipe = 0%
printer_notes = MACHINE_M5_\n PRINTER_VENDOR_ANKERMAKE\n PRINTER_MODEL_M5\n
[printer:*M5C*]
inherits = *common*
bed_shape = 0x0,220x0,220x220,0x220
max_print_height = 250
printer_model = M5C
retract_length = 0.8
retract_speed = 60
deretract_speed = 60
retract_before_travel = 3
retract_before_wipe = 0%
wipe = 1
printer_notes = MACHINE_M5C_\n PRINTER_VENDOR_ANKERMAKE\n P_PRECISION P_NORMAL P_FAST\n
[printer:AnkerMake M5 (0.4 mm nozzle)]
inherits = *M5*
nozzle_diameter = 0.4
printer_variant = 0.4
min_layer_height = 0.08
max_layer_height = 0.32
retract_lift_above = 0
default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
[printer:AnkerMake M5C (0.4 mm nozzle)]
inherits = *M5C*
nozzle_diameter = 0.4
printer_variant = 0.4
min_layer_height = 0.08
max_layer_height = 0.32
retract_lift_above = 0
default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
================================================
FILE: live/Anker/License.txt
================================================
GNU AFFERO GENERAL PUBLIC LICENSE
Version 3, 19 November 2007
Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU Affero General Public License is a free, copyleft license for
software and other kinds of works, specifically designed to ensure
cooperation with the community in the case of network server software.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
our General Public Licenses are intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
Developers that use our General Public Licenses protect your rights
with two steps: (1) assert copyright on the software, and (2) offer
you this License which gives you legal permission to copy, distribute
and/or modify the software.
A secondary benefit of defending all users' freedom is that
improvements made in alternate versions of the program, if they
receive widespread use, become available for other developers to
incorporate. Many developers of free software are heartened and
encouraged by the resulting cooperation. However, in the case of
software used on network servers, this result may fail to come about.
The GNU General Public License permits making a modified version and
letting the public access it on a server without ever releasing its
source code to the public.
The GNU Affero General Public License is designed specifically to
ensure that, in such cases, the modified source code becomes available
to the community. It requires the operator of a network server to
provide the source code of the modified version running there to the
users of that server. Therefore, public use of a modified version, on
a publicly accessible server, gives the public access to the source
code of the modified version.
An older license, called the Affero General Public License and
published by Affero, was designed to accomplish similar goals. This is
a different license, not a version of the Affero GPL, but Affero has
released a new version of the Affero GPL which permits relicensing under
this license.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU Affero General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Remote Network Interaction; Use with the GNU General Public License.
Notwithstanding any other provision of this License, if you modify the
Program, your modified version must prominently offer all users
interacting with it remotely through a computer network (if your version
supports such interaction) an opportunity to receive the Corresponding
Source of your version by providing access to the Corresponding Source
from a network server at no charge, through some standard or customary
means of facilitating copying of software. This Corresponding Source
shall include the Corresponding Source for any work covered by version 3
of the GNU General Public License that is incorporated pursuant to the
following paragraph.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the work with which it is combined will remain governed by version
3 of the GNU General Public License.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU Affero General Public License from time to time. Such new versions
will be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU Affero General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU Affero General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU Affero General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published
by the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Affero General Public License for more details.
You should have received a copy of the GNU Affero General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If your software can interact with users remotely through a computer
network, you should also make sure that it provides a way for users to
get its source. For example, if your program is a web application, its
interface could display a "Source" link that leads users to an archive
of the code. There are many ways you could offer source, and different
solutions will be better for different programs; see section 13 for the
specific requirements.
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU AGPL, see
<https://www.gnu.org/licenses/>.
================================================
FILE: live/Anker/README.md
================================================
# AnkerMake M5 Settings for PrusaSlicer
The official AnkerMake M5 settings are housed in this repository, and they have been carefully crafted for use exclusively with PrusaSlicer. These settings have undergone an exhaustive review process and have been formally submitted to the PrusaSlicer team for consideration. You can access the tutorial on using the settings directly through [Adding AnkerMake M5 to Prusa and Cura Guide](https://support.ankermake.com/s/article/Adding-AnkerMake-M5-to-Prusa-and-Cura-Guide#content1). Additionally, the settings will be integrated into the upcoming version of PrusaSlicer.
We are fully dedicated to maintaining and updating this repository to ensure that users always have access to the most current settings.
We would like to express our deep appreciation to [Just Trey](https://github.com/just-trey) for his invaluable contributions. It should be noted that these settings are built upon his repository [ankermake-m5-profile](https://github.com/just-trey/ankermake-m5-profile). Enthusiasts who are passionate about improving or testing the settings are welcome to provide feedback.
## Licenses
The settings for the AnkerMake M5 that are designed for use with PrusaSlicer have been released under the GNU AFFERO GENERAL PUBLIC LICENSE.
================================================
FILE: live/Anker/index.idx
================================================
min_slic3r_version = 2.6.0-alpha4
1.1.3 Fixed top solid infill extrusion width for M5C.
1.1.2 Added AnkerMake M5C.
1.1.1 Initial official version
1.0.1 Initial Version
min_slic3r_version = 2.6.0-alpha1
1.0.0 Initial Version
================================================
FILE: live/Anycubic/0.0.1.ini
================================================
# Print profiles for the Anycubic printers.
[vendor]
# Vendor name will be shown by the Config Wizard.
name = Anycubic
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 0.0.1
# Where to get the updates from?
config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anycubic/
# changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
[printer_model:AKLP]
name = Anycubic Kossel Linear Plus
variants = 0.4
technology = FFF
family = KOSSEL
bed_model = AKLP_Bed.stl
bed_texture = AK.png
default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
[printer_model:AK]
name = Anycubic Kossel Pulley (Linear)
variants = 0.4
technology = FFF
family = KOSSEL
bed_model = AK_Bed.stl
bed_texture = AK.png
default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
[printer_model:MEGA0]
name = Anycubic Mega Zero
variants = 0.4
technology = FFF
family = MEGA
bed_model = mega0_bed.stl
bed_texture = mega0.svg
default_materials = Generic PLA @MEGA0; Generic PETG @MEGA0; Anycubic PLA @MEGA0; Prusament PLA @MEGA0; Prusament PETG @MEGA0
[printer_model:I3MEGA]
name = Anycubic i3 Mega
variants = 0.4
technology = FFF
family = MEGA
[printer_model:I3MEGAS]
name = Anycubic i3 Mega S
variants = 0.4
technology = FFF
family = MEGA
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
## Anycubic KOSSEL
## Author: https://github.com/tc0fh
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4220
# Common print preset
[print:*common_akossel*]
avoid_crossing_perimeters = 0
bottom_solid_min_thickness = 0.5
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 30
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
complete_objects = 0
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeters_first = 0
external_perimeter_extrusion_width = 0.45
extra_perimeters = 0
extruder_clearance_height = 25
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = grid
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
gap_fill_speed = 40
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
interface_shells = 0
max_print_speed = 200
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes =
overhangs = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{print_preset}_{filament_type[0]}_{printer_model}_{print_time}.gcode
perimeters = 2
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 45
post_process =
print_settings_id =
raft_layers = 0
resolution = 0
seam_position = nearest
single_extruder_multi_material_priming = 0
skirts = 2
skirt_distance = 5
skirt_height = 1
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0.38
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thin_walls = 0
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
top_solid_min_thickness = 0.6
travel_speed = 180
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0
bridge_acceleration = 1000
default_acceleration = 1500
first_layer_acceleration = 1000
infill_acceleration = 1500
perimeter_acceleration = 800
[print:*0.08mm_akossel*]
inherits = *common_akossel*
bottom_solid_layers = 10
bridge_acceleration = 300
bridge_flow_ratio = 0.7
bridge_speed = 20
external_perimeter_speed = 20
first_layer_acceleration = 500
gap_fill_speed = 20
infill_acceleration = 800
infill_speed = 40
layer_height = 0.08
max_print_speed = 80
perimeter_acceleration = 300
perimeter_speed = 30
perimeters = 3
small_perimeter_speed = 20
solid_infill_speed = 40
support_material_extrusion_width = 0.3
support_material_spacing = 1.5
support_material_speed = 40
top_solid_infill_speed = 30
top_solid_layers = 12
[print:*0.16mm_akossel*]
inherits = *common_akossel*
bottom_solid_layers = 5
layer_height = 0.16
top_solid_layers = 6
[print:*0.20mm_akossel*]
inherits = *common_akossel*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
layer_height = 0.20
top_solid_layers = 5
[print:*0.24mm_akossel*]
inherits = *common_akossel*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
layer_height = 0.24
perimeter_speed = 50
external_perimeter_speed = 35
top_solid_layers = 4
infill_speed = 100
solid_infill_speed = 100
top_solid_infill_speed = 40
[print:*0.30mm_akossel*]
inherits = *common_akossel*
bottom_solid_layers = 3
bridge_flow_ratio = 0.95
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 35
extrusion_width = 0.5
infill_extrusion_width = 0.5
infill_speed = 70
layer_height = 0.30
perimeter_extrusion_width = 0.5
perimeter_speed = 50
small_perimeter_speed = 30
solid_infill_extrusion_width = 0.5
solid_infill_speed = 70
support_material_speed = 45
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 50
top_solid_layers = 3
[print:0.08mm ULTRADETAIL @AKOSSEL]
inherits = *0.08mm_akossel*
fill_density = 15%
fill_pattern = gyroid
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.16mm QUALITY @AKOSSEL]
inherits = *0.16mm_akossel*
external_perimeter_speed = 25
fill_density = 15%
fill_pattern = gyroid
infill_speed = 80
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.16mm SPEED @AKOSSEL]
inherits = *0.16mm_akossel*
external_perimeter_speed = 35
infill_speed = 120
perimeter_speed = 60
solid_infill_speed = 120
top_solid_infill_speed = 50
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.20mm QUALITY @AKOSSEL]
inherits = *0.20mm_akossel*
external_perimeter_speed = 25
fill_density = 15%
fill_pattern = gyroid
infill_speed = 80
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.20mm SPEED @AKOSSEL]
inherits = *0.20mm_akossel*
external_perimeter_speed = 35
infill_speed = 120
perimeter_speed = 60
solid_infill_speed = 120
top_solid_infill_speed = 50
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.24mm DRAFT @AKOSSEL]
inherits = *0.24mm_akossel*
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.30mm FAST @AKOSSEL]
inherits = *0.30mm_akossel*
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
# Common filament preset
[filament:*common_akossel*]
cooling = 0
compatible_printers =
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Anycubic.*/ and printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/
[filament:*PLA_akossel*]
inherits = *common_akossel*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #FF3232
filament_max_volumetric_speed = 10
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 200
fan_always_on = 1
cooling = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 200
[filament:*PET_akossel*]
inherits = *common_akossel*
bed_temperature = 70
cooling = 1
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature =70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 20
bridge_fan_speed = 100
temperature = 240
[filament:*ABS_akossel*]
inherits = *common_akossel*
bed_temperature = 100
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #3A80CA
filament_max_volumetric_speed = 10
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 100
first_layer_temperature = 245
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 245
[filament:Generic PLA @AKOSSEL]
inherits = *PLA_akossel*
filament_vendor = Generic
[filament:Generic PETG @AKOSSEL]
inherits = *PET_akossel*
filament_vendor = Generic
[filament:Generic ABS @AKOSSEL]
inherits = *ABS_akossel*
filament_vendor = Generic
# Common printer preset
[printer:*common_akossel*]
printer_technology = FFF
bed_shape =
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
between_objects_gcode =
deretract_speed = 40
extruder_colour = #FFFF00
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 3000
machine_max_acceleration_extruding = 1000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 1500
machine_max_acceleration_y = 1500
machine_max_acceleration_z = 1500
machine_max_feedrate_e = 60
machine_max_feedrate_x = 200
machine_max_feedrate_y = 200
machine_max_feedrate_z = 200
machine_max_jerk_e = 5
machine_max_jerk_x = 5
machine_max_jerk_y = 5
machine_max_jerk_z = 5
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.3
min_layer_height = 0.08
max_print_height = 300
nozzle_diameter = 0.4
octoprint_apikey =
octoprint_host =
printer_notes =
printer_settings_id =
retract_before_travel = 2
retract_before_wipe = 70%
retract_layer_change = 1
retract_length = 5
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
serial_port =
serial_speed = 250000
single_extruder_multi_material = 0
start_gcode =
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+10, max_print_height)} F600{endif} ; Move print head up\nG1 X0 Y100 F3000 ; present print\nM84 ; disable motors
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
default_print_profile = 0.20mm QUALITY @AKOSSEL
default_filament_profile = Generic PLA @AKOSSEL
[printer:Anycubic Kossel Linear Plus]
inherits = *common_akossel*
printer_model = AKLP
printer_variant = 0.4
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Anycubic\nPRINTER_MODEL_AKLP\nPRINTER_HAS_BOWDEN\n
bed_shape = 114.562x10.0229,113.253x19.9695,111.081x29.7642,108.065x39.3323,104.225x48.6011,99.5929x57.5,94.2025x65.9613,88.0951x73.9206,81.3173x81.3173,73.9206x88.0951,65.9613x94.2025,57.5x99.5929,48.6011x104.225,39.3323x108.065,29.7642x111.081,19.9695x113.253,10.0229x114.562,7.04172e-15x115,-10.0229x114.562,-19.9695x113.253,-29.7642x111.081,-39.3323x108.065,-48.6011x104.225,-57.5x99.5929,-65.9613x94.2025,-73.9206x88.0951,-81.3173x81.3173,-88.0951x73.9206,-94.2025x65.9613,-99.5929x57.5,-104.225x48.6011,-108.065x39.3323,-111.081x29.7642,-113.253x19.9695,-114.562x10.0229,-115x1.40834e-14,-114.562x-10.0229,-113.253x-19.9695,-111.081x-29.7642,-108.065x-39.3323,-104.225x-48.6011,-99.5929x-57.5,-94.2025x-65.9613,-88.0951x-73.9206,-81.3173x-81.3173,-73.9206x-88.0951,-65.9613x-94.2025,-57.5x-99.5929,-48.6011x-104.225,-39.3323x-108.065,-29.7642x-111.081,-19.9695x-113.253,-10.0229x-114.562,-2.11252e-14x-115,10.0229x-114.562,19.9695x-113.253,29.7642x-111.081,39.3323x-108.065,48.6011x-104.225,57.5x-99.5929,65.9613x-94.2025,73.9206x-88.0951,81.3173x-81.3173,88.0951x-73.9206,94.2025x-65.9613,99.5929x-57.5,104.225x-48.6011,108.065x-39.3323,111.081x-29.7642,113.253x-19.9695,114.562x-10.0229,115x-2.81669e-14
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home\nG1 X-54.672 Y95.203 Z0.3 F9000\nG92 E0.0\nG1 F1000\nG1 X-52.931 Y96.185 E0.300\nG1 X-50.985 Y97.231 E0.331\nG1 X-49.018 Y98.238 E0.331\nG1 X-47.032 Y99.205 E0.331\nG1 X-45.026 Y100.132 E0.331\nG1 X-43.003 Y101.019 E0.331\nG1 X-40.961 Y101.864 E0.331\nG1 X-38.904 Y102.668 E0.331\nG1 X-36.83 Y103.431 E0.331\nG1 X-34.742 Y104.152 E0.331\nG1 X-32.639 Y104.83 E0.331\nG1 X-30.523 Y105.466 E0.331\nG1 X-28.395 Y106.06 E0.331\nG1 X-26.255 Y106.61 E0.331\nG1 X-24.105 Y107.117 E0.331\nG1 X-21.945 Y107.581 E0.331\nG1 X-19.776 Y108.001 E0.331\nG1 X-17.599 Y108.377 E0.331\nG1 X-15.415 Y108.71 E0.331\nG1 X-13.224 Y108.998 E0.331\nG1 X-11.028 Y109.242 E0.331\nG1 X-8.828 Y109.442 E0.331\nG1 X-6.624 Y109.598 E0.331\nG1 X-4.418 Y109.709 E0.331\nG1 X-2.209 Y109.776 E0.332\nG1 X0 Y109.798 E0.331\nG1 X2.209 Y109.776 E0.690\nG1 X4.418 Y109.709 E0.691\nG1 X6.624 Y109.598 E0.690\nG1 X8.828 Y109.442 E0.690\nG1 X11.028 Y109.242 E0.690\nG1 X13.224 Y108.998 E0.690\nG1 X15.415 Y108.71 E0.691\nG1 X17.599 Y108.377 E0.690\nG1 X19.776 Y108.001 E0.690\nG1 X21.945 Y107.581 E0.690\nG1 X24.105 Y107.117 E0.690\nG1 X26.255 Y106.61 E0.690\nG1 X28.395 Y106.06 E0.690\nG1 X30.523 Y105.466 E0.690\nG1 X32.639 Y104.83 E0.690\nG1 X34.742 Y104.152 E0.690\nG1 X36.83 Y103.431 E0.690\nG1 X38.904 Y102.668 E0.691\nG1 X40.961 Y101.864 E0.690\nG1 X43.003 Y101.019 E0.691\nG1 X45.026 Y100.132 E0.690\nG1 X47.032 Y99.205 E0.691\nG1 X49.018 Y98.238 E0.690\nG1 X50.985 Y97.231 E0.691\nG1 X52.931 Y96.185 E0.690\nG1 X54.672 Y95.203 E0.625\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y96.185 F1000 ; wipe\nG1 X50.985 Y97.231 F1000 ; wipe\nG1 X49.018 Y98.238 F1000 ; wipe\nG1 X0 Y109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\nM221 S{if layer_height<0.075}100{else}95{endif}
[printer:Anycubic Kossel Pulley (Linear)]
inherits = *common_akossel*
printer_model = AK
printer_variant = 0.4
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Anycubic\nPRINTER_MODEL_AK\nPRINTER_HAS_BOWDEN\n
bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home\nG1 X-39.672 Y69.712 Z0.3 F9000\nG92 E0.0\nG1 F1000\nG1 X-38.457 Y70.397 E0.209\nG1 X-37.043 Y71.157 E0.241\nG1 X-35.614 Y71.889 E0.241\nG1 X-34.171 Y72.591 E0.241\nG1 X-32.714 Y73.265 E0.241\nG1 X-31.244 Y73.909 E0.241\nG1 X-29.761 Y74.523 E0.241\nG1 X-28.266 Y75.108 E0.241\nG1 X-26.759 Y75.662 E0.241\nG1 X-25.242 Y76.185 E0.241\nG1 X-23.714 Y76.678 E0.241\nG1 X-22.177 Y77.14 E0.241\nG1 X-20.63 Y77.571 E0.241\nG1 X-19.076 Y77.971 E0.241\nG1 X-17.514 Y78.34 E0.241\nG1 X-15.944 Y78.677 E0.241\nG1 X-14.368 Y78.982 E0.241\nG1 X-12.786 Y79.255 E0.241\nG1 X-11.199 Y79.497 E0.241\nG1 X-9.608 Y79.706 E0.241\nG1 X-8.013 Y79.884 E0.241\nG1 X-6.414 Y80.029 E0.241\nG1 X-4.813 Y80.142 E0.241\nG1 X-3.21 Y80.223 E0.241\nG1 X-1.605 Y80.271 E0.241\nG1 X0 Y80.287 E0.241\nG1 X1.605 Y80.271 E0.502\nG1 X3.21 Y80.223 E0.502\nG1 X4.813 Y80.142 E0.502\nG1 X6.414 Y80.029 E0.502\nG1 X8.013 Y79.884 E0.502\nG1 X9.608 Y79.706 E0.502\nG1 X11.199 Y79.497 E0.501\nG1 X12.786 Y79.255 E0.502\nG1 X14.368 Y78.982 E0.502\nG1 X15.944 Y78.677 E0.502\nG1 X17.514 Y78.34 E0.502\nG1 X19.076 Y77.971 E0.502\nG1 X20.63 Y77.571 E0.501\nG1 X22.177 Y77.14 E0.502\nG1 X23.714 Y76.678 E0.502\nG1 X25.242 Y76.185 E0.502\nG1 X26.759 Y75.662 E0.501\nG1 X28.266 Y75.108 E0.502\nG1 X29.761 Y74.523 E0.502\nG1 X31.244 Y73.909 E0.502\nG1 X32.714 Y73.265 E0.502\nG1 X34.171 Y72.591 E0.502\nG1 X35.614 Y71.889 E0.501\nG1 X37.043 Y71.157 E0.502\nG1 X38.457 Y70.397 E0.502\nG1 X39.672 Y69.712 E0.436\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
## Anycubic MEGA ZERO
## Author: https://github.com/kad
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4057
# Common print preset
[print:*common_mega0*]
avoid_crossing_perimeters = 1
bridge_angle = 0
bridge_flow_ratio = 0.7
bridge_speed = 25
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
complete_objects = 0
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeters_first = 0
external_perimeter_extrusion_width = 0.45
extra_perimeters = 0
extruder_clearance_height = 25
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = grid
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
gap_fill_speed = 30
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
interface_shells = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes =
overhangs = 1
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
perimeters = 2
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
post_process =
print_settings_id =
raft_layers = 0
resolution = 0
seam_position = nearest
single_extruder_multi_material_priming = 1
skirts = 2
skirt_distance = 2
skirt_height = 2
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0.4
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 40
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thin_walls = 0
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 40
travel_speed = 100
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0
[print:*0.10mm_mega0*]
inherits = *common_mega0*
perimeter_speed = 40
external_perimeter_speed = 25
infill_speed = 50
solid_infill_speed = 40
layer_height = 0.10
perimeters = 3
top_infill_extrusion_width = 0.4
bottom_solid_layers = 6
top_solid_layers = 7
[print:*0.20mm_mega0*]
inherits = *common_mega0*
perimeter_speed = 40
external_perimeter_speed = 25
infill_speed = 50
solid_infill_speed = 40
layer_height = 0.20
top_infill_extrusion_width = 0.4
bottom_solid_layers = 4
top_solid_layers = 5
[print:*0.30mm_mega0*]
inherits = *common_mega0*
perimeter_speed = 40
external_perimeter_speed = 25
infill_speed = 50
solid_infill_speed = 40
layer_height = 0.24
top_infill_extrusion_width = 0.45
bottom_solid_layers = 3
top_solid_layers = 4
[print:0.10mm DETAIL @MEGA0]
inherits = *0.10mm_mega0*
travel_speed = 120
infill_speed = 50
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_extrusion_width = 0.38
compatible_printers_condition = printer_model=="MEGA0" and nozzle_diameter[0]==0.4
[print:0.20mm NORMAL @MEGA0]
inherits = *0.20mm_mega0*
travel_speed = 120
infill_speed = 50
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_extrusion_width = 0.38
compatible_printers_condition = printer_model=="MEGA0" and nozzle_diameter[0]==0.4
[print:0.30mm DRAFT @MEGA0]
inherits = *0.30mm_mega0*
travel_speed = 120
infill_speed = 50
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_extrusion_width = 0.38
compatible_printers_condition = printer_model=="MEGA0" and nozzle_diameter[0]==0.4
# Common filament preset
[filament:*common_mega0*]
cooling = 0
compatible_printers =
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = printer_model=="MEGA0"
[filament:*PLA_mega0*]
inherits = *common_mega0*
bed_temperature = 40
fan_below_layer_time = 100
filament_colour = #FF3232
filament_max_volumetric_speed = 15
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 40
first_layer_temperature = 215
fan_always_on = 1
cooling = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 210
[filament:*PET_mega0*]
inherits = *common_mega0*
bed_temperature = 70
cooling = 1
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature =70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 20
bridge_fan_speed = 100
temperature = 240
[filament:*ABS_mega0*]
inherits = *common_mega0*
bed_temperature = 100
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #3A80CA
filament_max_volumetric_speed = 11
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 100
first_layer_temperature = 245
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 245
[filament:Generic PLA @MEGA0]
inherits = *PLA_mega0*
filament_vendor = Generic
[filament:Generic PETG @MEGA0]
inherits = *PET_mega0*
filament_vendor = Generic
[filament:Generic ABS @MEGA0]
inherits = *ABS_mega0*
filament_vendor = Generic
[filament:Anycubic PLA @MEGA0]
inherits = *PLA_mega0*
filament_vendor = Anycubic
temperature = 190
first_layer_temperature = 195
filament_cost = 24.99
filament_density = 1.25
[filament:Prusament PLA @MEGA0]
inherits = *PLA_mega0*
filament_vendor = Prusa Polymers
temperature = 215
bed_temperature = 40
first_layer_temperature = 215
filament_cost = 24.99
filament_density = 1.24
[filament:Prusament PETG @MEGA0]
inherits = *PET_mega0*
filament_vendor = Prusa Polymers
temperature = 245
bed_temperature = 70
first_layer_temperature = 245
filament_cost = 24.99
filament_density = 1.27
# Common printer preset
[printer:*common_mega0*]
printer_technology = FFF
bed_shape = 0x0,220x0,220x220,0x220
before_layer_gcode = ; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm
between_objects_gcode =
deretract_speed = 0
extruder_colour = #FFFF00
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 2000
machine_max_acceleration_retracting = 1500
machine_max_acceleration_x = 3000
machine_max_acceleration_y = 3000
machine_max_acceleration_z = 500
machine_max_feedrate_e = 120
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 12
machine_max_jerk_e = 2.5
machine_max_jerk_x = 20
machine_max_jerk_y = 20
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm
max_layer_height = 0.3
min_layer_height = 0.1
max_print_height = 200
nozzle_diameter = 0.4
octoprint_apikey =
octoprint_host =
printer_notes =
printer_settings_id =
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 6
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
serial_port =
serial_speed = 115200
single_extruder_multi_material = 0
start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F240 ;move the platform down 15mm\nM117 Heating ...\nM104 S[first_layer_temperature]\n ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature]\n ; wait for extruder temp\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM117 Printing...\n
end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM140 S0 ; turn off heatbed\nM107 ; Fan off\nM84 ; disable motors\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F240 ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
printer_model =
default_print_profile =
default_filament_profile =
[printer:Anycubic Mega Zero]
inherits = *common_mega0*
printer_model = MEGA0
printer_variant = 0.4
max_layer_height = 0.3
min_layer_height = 0.1
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_MEGA0
bed_shape = 0x0,220x0,220x220,0x220
max_print_height = 250
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 500
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_feedrate_e = 25
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 5
machine_max_jerk_e = 5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
nozzle_diameter = 0.4
retract_before_travel = 2
retract_layer_change = 0
retract_length = 7
retract_speed = 30
retract_lift = 0.2
deretract_speed = 30
retract_before_wipe = 70%
default_print_profile = 0.20mm NORMAL @MEGA0
default_filament_profile = Anycubic PLA @MEGA0
start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F240 ;move the platform down 15mm\nM117 Heating ...\nM104 S[first_layer_temperature]\n ; set extruder temp\nM109 S[first_layer_temperature]\n ; wait for extruder temp\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM117 Printing...\n
end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM107 ; Fan off\nM84 ; disable motors\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F240 ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n
## Anycubic i3 Mega and i3 Mega S
## Author: https://github.com/Igami
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4619
[print:*common_mega*]
bottom_solid_min_thickness = 0.5
bridge_acceleration = 1800
bridge_flow_ratio = 0.8
bridge_speed = 30
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ and nozzle_diameter[0]==0.4
default_acceleration = 1800
ensure_vertical_shell_thickness = 1
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 40
extruder_clearance_height = 35
extruder_clearance_radius = 60
extrusion_width = 0.45
fill_density = 15%
fill_pattern = gyroid
first_layer_acceleration = 1800
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
gap_fill_speed = 40
gcode_comments = 1
infill_acceleration = 1800
infill_extrusion_width = 0.45
infill_speed = 60
only_retract_when_crossing_perimeters = 0
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
perimeter_acceleration = 1800
perimeter_extrusion_width = 0.45
perimeters = 2
seam_position = nearest
skirts = 0
slice_closing_radius = 0.05
small_perimeter_speed = 30
solid_infill_below_area = 0
solid_infill_speed = 60
support_material_buildplate_only = 1
support_material_contact_distance = 0.1
support_material_extrusion_width = 0.35
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_spacing = 2
support_material_threshold = 55
support_material_with_sheath = 0
thin_walls = 0
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
top_solid_min_thickness = 0.6
travel_speed = 180
[print:*supported_mega*]
raft_layers = 2
support_material = 1
# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.15mm ---XXX
# XXXXXXXXXXXXXXXXXXXX
[print:*0.15mm_mega*]
inherits = *common_mega*
bottom_solid_layers = 5
layer_height = 0.15
top_solid_layers = 7
[print:0.15mm QUALITY @MEGA]
inherits = *0.15mm_mega*
[print:0.15mm QUALITY SUPPORTED @MEGA]
inherits = *0.15mm_mega*;*supported_mega*
# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.20mm ---XXX
# XXXXXXXXXXXXXXXXXXXX
[print:*0.20mm_mega*]
inherits = *common_mega*
bottom_solid_layers = 4
layer_height = 0.2
top_solid_layers = 5
[print:0.20mm QUALITY @MEGA]
inherits = *0.20mm_mega*
[print:0.20mm QUALITY SUPPORTED @MEGA]
inherits = *0.20mm_mega*;*supported_mega*
# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.30mm ---XXX
# XXXXXXXXXXXXXXXXXXXX
[print:*0.30mm_mega*]
inherits = *common_mega*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
top_solid_layers = 4
[print:0.30mm DRAFT @MEGA]
inherits = *0.30mm_mega*
[print:0.30mm DRAFT SUPPORTED @MEGA]
inherits = *0.30mm_mega*;*supported_mega*
# XXXXXXXXXXXXXXXXXXXXXX
# XXX--- filament ---XXX
# XXXXXXXXXXXXXXXXXXXXXX
[filament:*common_mega*]
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/
end_filament_gcode = "; Filament-specific end gcode"
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF8000
filament_vendor = Generic
min_print_speed = 15
slowdown_below_layer_time = 20
[filament:*ABS_mega*]
inherits = *common_mega*
bed_temperature = 110
bridge_fan_speed = 25
cooling = 0
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #FFF2EC
filament_cost = 27.82
filament_density = 1.04
filament_max_volumetric_speed = 11
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 30
min_fan_speed = 20
temperature = 255
[filament:Generic ABS @MEGA]
inherits = *ABS_mega*
[filament:*FLEX_mega*]
inherits = *common_mega*
bed_temperature = 50
bridge_fan_speed = 80
cooling = 0
extrusion_multiplier = 1.15
fan_always_on = 0
filament_colour = #008000
filament_cost = 82.00
filament_density = 1.22
filament_deretract_speed = 25
filament_max_volumetric_speed = 1.2
filament_retract_length = 0.8
filament_type = FLEX
first_layer_bed_temperature = 50
first_layer_temperature = 240
max_fan_speed = 90
min_fan_speed = 70
temperature = 240
[filament:Generic FLEX @MEGA]
inherits = *FLEX_mega*
[filament:*PETG_mega*]
inherits = *common_mega*
bed_temperature = 90
bridge_fan_speed = 50
fan_below_layer_time = 20
filament_cost = 27.82
filament_density = 1.27
filament_max_volumetric_speed = 8
filament_type = PETG
first_layer_bed_temperature = 85
first_layer_temperature = 230
max_fan_speed = 50
min_fan_speed = 30
temperature = 240
[filament:Generic PETG @MEGA]
inherits = *PETG_mega*
[filament:*PLA_mega*]
inherits = *common_mega*
bed_temperature = 60
disable_fan_first_layers = 1
filament_cost = 25.40
filament_density = 1.24
filament_max_volumetric_speed = 10
first_layer_bed_temperature = 60
first_layer_temperature = 215
min_fan_speed = 100
temperature = 210
[filament:Generic PLA @MEGA]
inherits = *PLA_mega*
[filament:*3Dmensionals PLA_mega*]
inherits = *PLA_mega*
filament_vendor = 3Dmensionals
filament_cost = 23.35
[filament:3Dmensionals PLA @MEGA]
inherits = *3Dmensionals PLA_mega*
[filament:3Dmensionals PLA blue @MEGA]
inherits = *3Dmensionals PLA_mega*
filament_colour = #4155FB
[filament:3Dmensionals PLA silver @MEGA]
inherits = *3Dmensionals PLA_mega*
filament_colour = #B9B5B4
[filament:3Dmensionals PLA white @MEGA]
inherits = *3Dmensionals PLA_mega*
filament_colour = #FEFEFD
[filament:*Verbatim PLA_mega*]
inherits = *PLA_mega*
filament_vendor = Verbatim
filament_cost = 23.88
[filament:Verbatim PLA @MEGA]
inherits = *Verbatim PLA_mega*
[filament:Verbatim PLA black @MEGA]
inherits = *Verbatim PLA_mega*
filament_colour = #333333
[printer:*common_mega*]
printer_technology = FFF
bed_shape = 0x0,210x0,210x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]
default_filament_profile = Generic PLA @MEGA
default_print_profile = 0.15mm QUALITY @MEGA
deretract_speed = 50
end_gcode = G4 ; wait\nG92 E0\nG1{if layer_z < max_print_height} Z{z_offset+min(layer_z+30, max_print_height)}{endif} E-35 F1000 ; move print head up & retract filament\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
extruder_colour = #808080
gcode_flavor = marlin
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.36
max_print_height = 205
retract_before_wipe = 60%
retract_layer_change = 1
retract_length = 6
retract_lift = 0.075
retract_lift_below = 204
silent_mode = 0
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y0 Z1 F100 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0\nG1 E38 F1000; deretract filament\nG92 E0\nG1 X60 Z0 E9 ; intro line\nG1 X100 E12.5 ; intro line\nG92 E0
use_relative_e_distances = 1
wipe = 1
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 1250
machine_max_acceleration_retracting = 1250
machine_max_acceleration_x = 1000
machine_max_acceleration_y = 1000
machine_max_acceleration_z = 200
machine_max_feedrate_e = 60
machine_max_feedrate_x = 200
machine_max_feedrate_y = 200
machine_max_feedrate_z = 6
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
[printer:Anycubic i3 Mega]
inherits = *common_mega*
printer_model = I3MEGA
printer_variant = 0.4
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA\nPRINTER_HAS_BOWDEN
[printer:Anycubic i3 Mega S]
inherits = *common_mega*
printer_model = I3MEGAS
printer_variant = 0.4
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA_S\nPRINTER_HAS_BOWDEN
machine_max_feedrate_z = 8
================================================
FILE: live/Anycubic/0.0.10.ini
================================================
# Print profiles for the Anycubic printers.
[vendor]
# Vendor name will be shown by the Config Wizard.
name = Anycubic
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 0.0.10
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anycubic/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
[printer_model:AKLP]
name = Anycubic Kossel Linear Plus
variants = 0.4
technology = FFF
family = KOSSEL
bed_model = AKLP_Bed.stl
bed_texture = AK.svg
default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
[printer_model:AK]
name = Anycubic Kossel Pulley (Linear)
variants = 0.4
technology = FFF
family = KOSSEL
bed_model = AK_Bed.stl
bed_texture = AK.svg
default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
[printer_model:MEGA0]
name = Anycubic Mega Zero
variants = 0.4
technology = FFF
family = MEGA
bed_model = mega0_bed.stl
bed_texture = mega0.svg
default_materials = Generic PLA @MEGA0; Generic PETG @MEGA0; Anycubic PLA @MEGA0; Prusament PLA @MEGA0; Prusament PETG @MEGA0
[printer_model:I3MEGA]
name = Anycubic i3 Mega
variants = 0.4
technology = FFF
family = MEGA
[printer_model:I3MEGAS]
name = Anycubic i3 Mega S
variants = 0.4
technology = FFF
family = MEGA
[printer_model:PREDATOR]
name = Anycubic Predator
variants = 0.4; 0.6; 0.8
technology = FFF
family = PREDATOR
default_materials = Generic PLA @PREDATOR; Generic PETG @PREDATOR; Generic ABS @PREDATOR
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
## Anycubic KOSSEL
## Author: https://github.com/tc0fh
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4220
# Common print preset
[print:*common_akossel*]
avoid_crossing_perimeters = 0
bottom_solid_min_thickness = 0.5
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 30
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
complete_objects = 0
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeters_first = 0
external_perimeter_extrusion_width = 0.45
extra_perimeters = 0
extruder_clearance_height = 25
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = grid
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
gap_fill_speed = 40
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
interface_shells = 0
max_print_speed = 200
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes =
overhangs = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
perimeters = 2
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 45
post_process =
print_settings_id =
raft_layers = 0
resolution = 0
seam_position = nearest
single_extruder_multi_material_priming = 0
skirts = 2
skirt_distance = 5
skirt_height = 1
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0.38
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thin_walls = 0
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
top_solid_min_thickness = 0.6
travel_speed = 180
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0
bridge_acceleration = 1000
default_acceleration = 1500
first_layer_acceleration = 1000
infill_acceleration = 1500
perimeter_acceleration = 800
[print:*0.08mm_akossel*]
inherits = *common_akossel*
bottom_solid_layers = 10
bridge_acceleration = 300
bridge_flow_ratio = 0.7
bridge_speed = 20
external_perimeter_speed = 20
first_layer_acceleration = 500
gap_fill_speed = 20
infill_acceleration = 800
infill_speed = 40
layer_height = 0.08
max_print_speed = 80
perimeter_acceleration = 300
perimeter_speed = 30
perimeters = 3
small_perimeter_speed = 20
solid_infill_speed = 40
support_material_extrusion_width = 0.3
support_material_spacing = 1.5
support_material_speed = 40
top_solid_infill_speed = 30
top_solid_layers = 12
[print:*0.16mm_akossel*]
inherits = *common_akossel*
bottom_solid_layers = 5
layer_height = 0.16
top_solid_layers = 6
[print:*0.20mm_akossel*]
inherits = *common_akossel*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
layer_height = 0.20
top_solid_layers = 5
[print:*0.24mm_akossel*]
inherits = *common_akossel*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
layer_height = 0.24
perimeter_speed = 50
external_perimeter_speed = 35
top_solid_layers = 4
infill_speed = 100
solid_infill_speed = 100
top_solid_infill_speed = 40
[print:*0.30mm_akossel*]
inherits = *common_akossel*
bottom_solid_layers = 3
bridge_flow_ratio = 0.95
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 35
extrusion_width = 0.5
infill_extrusion_width = 0.5
infill_speed = 70
layer_height = 0.30
perimeter_extrusion_width = 0.5
perimeter_speed = 50
small_perimeter_speed = 30
solid_infill_extrusion_width = 0.5
solid_infill_speed = 70
support_material_speed = 45
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 50
top_solid_layers = 3
[print:0.08mm ULTRADETAIL @AKOSSEL]
inherits = *0.08mm_akossel*
fill_density = 15%
fill_pattern = gyroid
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.16mm QUALITY @AKOSSEL]
inherits = *0.16mm_akossel*
external_perimeter_speed = 25
fill_density = 15%
fill_pattern = gyroid
infill_speed = 80
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.16mm SPEED @AKOSSEL]
inherits = *0.16mm_akossel*
external_perimeter_speed = 35
infill_speed = 120
perimeter_speed = 60
solid_infill_speed = 120
top_solid_infill_speed = 50
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.20mm QUALITY @AKOSSEL]
inherits = *0.20mm_akossel*
external_perimeter_speed = 25
fill_density = 15%
fill_pattern = gyroid
infill_speed = 80
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.20mm SPEED @AKOSSEL]
inherits = *0.20mm_akossel*
external_perimeter_speed = 35
infill_speed = 120
perimeter_speed = 60
solid_infill_speed = 120
top_solid_infill_speed = 50
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.24mm DRAFT @AKOSSEL]
inherits = *0.24mm_akossel*
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
[print:0.30mm FAST @AKOSSEL]
inherits = *0.30mm_akossel*
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4
# Common filament preset
[filament:*common_akossel*]
cooling = 0
compatible_printers =
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Anycubic.*/ and printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/
[filament:*PLA_akossel*]
inherits = *common_akossel*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #FF3232
filament_max_volumetric_speed = 10
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 200
fan_always_on = 1
cooling = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 200
[filament:*PET_akossel*]
inherits = *common_akossel*
bed_temperature = 70
cooling = 1
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature =70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 20
bridge_fan_speed = 100
temperature = 240
[filament:*ABS_akossel*]
inherits = *common_akossel*
bed_temperature = 100
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #3A80CA
filament_max_volumetric_speed = 10
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 100
first_layer_temperature = 245
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 245
[filament:Generic PLA @AKOSSEL]
inherits = *PLA_akossel*
filament_vendor = Generic
[filament:Generic PETG @AKOSSEL]
inherits = *PET_akossel*
filament_vendor = Generic
[filament:Generic ABS @AKOSSEL]
inherits = *ABS_akossel*
filament_vendor = Generic
# Common printer preset
[printer:*common_akossel*]
printer_technology = FFF
bed_shape =
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]
between_objects_gcode =
deretract_speed = 40
extruder_colour = #FFFF00
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 3000
machine_max_acceleration_extruding = 1000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 1500
machine_max_acceleration_y = 1500
machine_max_acceleration_z = 1500
machine_max_feedrate_e = 60
machine_max_feedrate_x = 200
machine_max_feedrate_y = 200
machine_max_feedrate_z = 200
machine_max_jerk_e = 5
machine_max_jerk_x = 5
machine_max_jerk_y = 5
machine_max_jerk_z = 5
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.3
min_layer_height = 0.08
max_print_height = 300
nozzle_diameter = 0.4
printer_notes =
printer_settings_id =
retract_before_travel = 2
retract_before_wipe = 70%
retract_layer_change = 1
retract_length = 5
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
single_extruder_multi_material = 0
start_gcode =
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG28 ; home\nM84 ; disable motors
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
default_print_profile = 0.20mm QUALITY @AKOSSEL
default_filament_profile = Generic PLA @AKOSSEL
[printer:Anycubic Kossel Linear Plus]
inherits = *common_akossel*
printer_model = AKLP
printer_variant = 0.4
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Anycubic\nPRINTER_MODEL_AKLP\nPRINTER_HAS_BOWDEN\n
bed_shape = 114.562x10.0229,113.253x19.9695,111.081x29.7642,108.065x39.3323,104.225x48.6011,99.5929x57.5,94.2025x65.9613,88.0951x73.9206,81.3173x81.3173,73.9206x88.0951,65.9613x94.2025,57.5x99.5929,48.6011x104.225,39.3323x108.065,29.7642x111.081,19.9695x113.253,10.0229x114.562,7.04172e-15x115,-10.0229x114.562,-19.9695x113.253,-29.7642x111.081,-39.3323x108.065,-48.6011x104.225,-57.5x99.5929,-65.9613x94.2025,-73.9206x88.0951,-81.3173x81.3173,-88.0951x73.9206,-94.2025x65.9613,-99.5929x57.5,-104.225x48.6011,-108.065x39.3323,-111.081x29.7642,-113.253x19.9695,-114.562x10.0229,-115x1.40834e-14,-114.562x-10.0229,-113.253x-19.9695,-111.081x-29.7642,-108.065x-39.3323,-104.225x-48.6011,-99.5929x-57.5,-94.2025x-65.9613,-88.0951x-73.9206,-81.3173x-8
gitextract_4uxuaj19/
├── License
├── README.md
├── live/
│ ├── Anker/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.1.1.ini
│ │ ├── 1.1.2.ini
│ │ ├── 1.1.3.ini
│ │ ├── License.txt
│ │ ├── M5-bed.stl
│ │ ├── M5C-bed.stl
│ │ ├── README.md
│ │ └── index.idx
│ ├── Anycubic/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.10.ini
│ │ ├── 0.0.11.ini
│ │ ├── 0.0.12.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── 0.0.5.ini
│ │ ├── 0.0.6.ini
│ │ ├── 0.0.7.ini
│ │ ├── 0.0.8.ini
│ │ ├── 0.0.9.ini
│ │ ├── 0.1.0.ini
│ │ ├── 0.1.1.ini
│ │ ├── 0.1.2.ini
│ │ ├── 0.2.0.ini
│ │ ├── 0.2.1.ini
│ │ ├── 0.2.2.ini
│ │ ├── 0.2.3.ini
│ │ ├── 0.2.4.ini
│ │ ├── 0.2.5.ini
│ │ ├── 0.2.6.ini
│ │ ├── 0.2.7.ini
│ │ ├── 0.2.8.ini
│ │ ├── 4MAXPRO20_bed.stl
│ │ ├── AKLP_Bed.stl
│ │ ├── AK_Bed.stl
│ │ ├── i3megas_bed.stl
│ │ ├── index.idx
│ │ └── mega0_bed.stl
│ ├── AnycubicSLA/
│ │ ├── 0.0.1.ini
│ │ ├── 1.0.0.ini
│ │ └── index.idx
│ ├── Artillery/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── 0.0.5.ini
│ │ ├── 0.0.6.ini
│ │ ├── 0.0.7.ini
│ │ ├── 0.0.8.ini
│ │ ├── 0.0.9.ini
│ │ ├── bed-genius.stl
│ │ ├── bed-hornet.stl
│ │ ├── bed-x1.stl
│ │ ├── bed-x3-plus.stl
│ │ ├── bed-x3-pro.stl
│ │ ├── bed-x4-max.stl
│ │ ├── bed-x4-plus.stl
│ │ ├── bed-x4-pro.stl
│ │ └── index.idx
│ ├── BIBO/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── 0.0.5.ini
│ │ ├── 0.0.6.ini
│ │ ├── 0.0.7.ini
│ │ ├── BIBO2_bed.stl
│ │ ├── index.idx
│ │ └── test.txt
│ ├── BIQU/
│ │ ├── 0.1.0.ini
│ │ ├── BX_Bed.stl
│ │ └── index.idx
│ ├── CocoaPress/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.0.4.ini
│ │ ├── 1.0.5.ini
│ │ ├── index.idx
│ │ └── minichef_bed.stl
│ ├── Creality/
│ │ ├── 0.0.10.ini
│ │ ├── 0.0.11.ini
│ │ ├── 0.0.12.ini
│ │ ├── 0.0.13.ini
│ │ ├── 0.0.14.ini
│ │ ├── 0.0.15.ini
│ │ ├── 0.0.16.ini
│ │ ├── 0.0.17.ini
│ │ ├── 0.0.2-beta.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── 0.0.5.ini
│ │ ├── 0.0.6.ini
│ │ ├── 0.0.7.ini
│ │ ├── 0.0.8.ini
│ │ ├── 0.0.9.ini
│ │ ├── 0.1.0.ini
│ │ ├── 0.1.1.ini
│ │ ├── 0.1.2.ini
│ │ ├── 0.1.3.ini
│ │ ├── 0.1.4.ini
│ │ ├── 0.1.5.ini
│ │ ├── 0.2.0.ini
│ │ ├── 0.2.1.ini
│ │ ├── 0.2.2.ini
│ │ ├── 0.2.3.ini
│ │ ├── 0.2.4.ini
│ │ ├── 0.2.6.ini
│ │ ├── 0.2.7.ini
│ │ ├── 0.3.0.ini
│ │ ├── cr10_bed.stl
│ │ ├── cr10max_bed.stl
│ │ ├── cr10mini_bed.stl
│ │ ├── cr10s4_bed.stl
│ │ ├── cr10s5_bed.stl
│ │ ├── cr10v2_bed.stl
│ │ ├── cr200b_bed.stl
│ │ ├── cr5pro_bed.stl
│ │ ├── cr6se_bed.stl
│ │ ├── cr8_bed.stl
│ │ ├── ender2_bed.stl
│ │ ├── ender2pro_bed.stl
│ │ ├── ender3_bed.stl
│ │ ├── ender3v2_bed.stl
│ │ ├── ender5plus_bed.stl
│ │ ├── ender6_bed.stl
│ │ ├── ender7_bed.stl
│ │ ├── index.idx
│ │ ├── sermoond1_bed.stl
│ │ └── sermoonv1_bed.stl
│ ├── Elegoo/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ └── index.idx
│ ├── FLSun/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── Q5_bed.stl
│ │ ├── QQSP_bed.stl
│ │ └── index.idx
│ ├── Geeetech/
│ │ ├── 0.1.0.ini
│ │ ├── 125X130.stl
│ │ ├── 150x150.stl
│ │ ├── 160x160.stl
│ │ ├── 180X150.stl
│ │ ├── 200x200.stl
│ │ ├── 220x220.stl
│ │ ├── 250x250.stl
│ │ ├── 255x255.stl
│ │ ├── 300x180.stl
│ │ ├── 320x320.stl
│ │ └── index.idx
│ ├── HartSmartProducts/
│ │ ├── 0.1.0.ini
│ │ ├── 0.1.1.ini
│ │ ├── hsp1_i_bed.stl
│ │ ├── hsp1_i_duplicator_bed.stl
│ │ └── index.idx
│ ├── INAT/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ └── index.idx
│ ├── Infinity3D/
│ │ ├── 1.0.0.ini
│ │ ├── DEV_200_bed.stl
│ │ ├── DEV_350_bed.stl
│ │ └── index.idx
│ ├── Jubilee/
│ │ ├── 1.0.0.ini
│ │ ├── Jubilee_bed.stl
│ │ └── index.idx
│ ├── LNL3D/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── LNL3D_D3_V2_bed.stl
│ │ ├── LNL3D_D3_VULCAN_bed.stl
│ │ ├── LNL3D_D3_bed.stl
│ │ ├── LNL3D_D5_bed.stl
│ │ ├── LNL3D_D6_bed.stl
│ │ └── index.idx
│ ├── LulzBot/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.1.0.ini
│ │ └── index.idx
│ ├── MakerGear/
│ │ ├── 0.1.0.ini
│ │ ├── 0.1.1.ini
│ │ ├── M2_M3.stl
│ │ └── index.idx
│ ├── PapapiuLab/
│ │ ├── 0.1.0.ini
│ │ ├── Papapiu_N1S_Bed.stl
│ │ └── index.idx
│ ├── Print4Taste/
│ │ ├── 0.0.1.ini
│ │ ├── MC2.0_bed.stl
│ │ └── index.idx
│ ├── PrusaResearch/
│ │ ├── 0.1.0.ini
│ │ ├── 0.1.1.ini
│ │ ├── 0.1.10.ini
│ │ ├── 0.1.11.ini
│ │ ├── 0.1.12.ini
│ │ ├── 0.1.13.ini
│ │ ├── 0.1.14.ini
│ │ ├── 0.1.15.ini
│ │ ├── 0.1.16.ini
│ │ ├── 0.1.17.ini
│ │ ├── 0.1.18.ini
│ │ ├── 0.1.2.ini
│ │ ├── 0.1.3.ini
│ │ ├── 0.1.4.ini
│ │ ├── 0.1.5.ini
│ │ ├── 0.1.6.ini
│ │ ├── 0.1.7.ini
│ │ ├── 0.1.8.ini
│ │ ├── 0.1.9.ini
│ │ ├── 0.2.0-alpha.ini
│ │ ├── 0.2.0-alpha1.ini
│ │ ├── 0.2.0-alpha2.ini
│ │ ├── 0.2.0-alpha3.ini
│ │ ├── 0.2.0-alpha7.ini
│ │ ├── 0.2.0-alpha8.ini
│ │ ├── 0.2.0-beta.ini
│ │ ├── 0.2.0-beta2.ini
│ │ ├── 0.2.0-beta3.ini
│ │ ├── 0.2.0-beta4.ini
│ │ ├── 0.2.0-beta5.ini
│ │ ├── 0.2.1.ini
│ │ ├── 0.2.2.ini
│ │ ├── 0.2.3.ini
│ │ ├── 0.2.4.ini
│ │ ├── 0.2.5.ini
│ │ ├── 0.2.6.ini
│ │ ├── 0.2.7.ini
│ │ ├── 0.2.8.ini
│ │ ├── 0.2.9.ini
│ │ ├── 0.3.0.ini
│ │ ├── 0.3.1.ini
│ │ ├── 0.3.10.ini
│ │ ├── 0.3.11.ini
│ │ ├── 0.3.2.ini
│ │ ├── 0.3.3.ini
│ │ ├── 0.3.4.ini
│ │ ├── 0.3.5.ini
│ │ ├── 0.3.6.ini
│ │ ├── 0.3.7.ini
│ │ ├── 0.3.8.ini
│ │ ├── 0.3.9.ini
│ │ ├── 0.4.0-alpha2.ini
│ │ ├── 0.4.0-alpha3.ini
│ │ ├── 0.4.0-alpha4.ini
│ │ ├── 0.4.0.ini
│ │ ├── 0.4.1.ini
│ │ ├── 0.4.10.ini
│ │ ├── 0.4.11.ini
│ │ ├── 0.4.12.ini
│ │ ├── 0.4.2.ini
│ │ ├── 0.4.3.ini
│ │ ├── 0.4.4.ini
│ │ ├── 0.4.5.ini
│ │ ├── 0.4.6.ini
│ │ ├── 0.4.7.ini
│ │ ├── 0.4.8.ini
│ │ ├── 0.4.9.ini
│ │ ├── 0.8.0-alpha.ini
│ │ ├── 0.8.0-alpha6.ini
│ │ ├── 0.8.0-alpha7.ini
│ │ ├── 0.8.0-alpha8.ini
│ │ ├── 0.8.0-alpha9.ini
│ │ ├── 0.8.0-beta.ini
│ │ ├── 0.8.0-beta1.ini
│ │ ├── 0.8.0-beta2.ini
│ │ ├── 0.8.0-beta3.ini
│ │ ├── 0.8.0-beta4.ini
│ │ ├── 0.8.0-rc.ini
│ │ ├── 0.8.0-rc1.ini
│ │ ├── 0.8.0-rc2.ini
│ │ ├── 0.8.0.ini
│ │ ├── 0.8.1.ini
│ │ ├── 0.8.10.ini
│ │ ├── 0.8.11.ini
│ │ ├── 0.8.2.ini
│ │ ├── 0.8.3.ini
│ │ ├── 0.8.4.ini
│ │ ├── 0.8.5.ini
│ │ ├── 0.8.6.ini
│ │ ├── 0.8.7.ini
│ │ ├── 0.8.8.ini
│ │ ├── 0.8.9.ini
│ │ ├── 1.0.0-alpha0.ini
│ │ ├── 1.0.0-alpha1.ini
│ │ ├── 1.0.0-alpha2.ini
│ │ ├── 1.0.0-beta0.ini
│ │ ├── 1.0.0-beta1.ini
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.10.ini
│ │ ├── 1.0.11.ini
│ │ ├── 1.0.12.ini
│ │ ├── 1.0.13.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.0.4.ini
│ │ ├── 1.0.5.ini
│ │ ├── 1.0.6.ini
│ │ ├── 1.0.7.ini
│ │ ├── 1.0.8.ini
│ │ ├── 1.0.9.ini
│ │ ├── 1.1.0.ini
│ │ ├── 1.1.1-alpha2.ini
│ │ ├── 1.1.1-alpha3.ini
│ │ ├── 1.1.1-alpha4.ini
│ │ ├── 1.1.1-beta.ini
│ │ ├── 1.1.1.ini
│ │ ├── 1.1.10.ini
│ │ ├── 1.1.11.ini
│ │ ├── 1.1.12.ini
│ │ ├── 1.1.13.ini
│ │ ├── 1.1.14.ini
│ │ ├── 1.1.15.ini
│ │ ├── 1.1.16.ini
│ │ ├── 1.1.17.ini
│ │ ├── 1.1.2.ini
│ │ ├── 1.1.3.ini
│ │ ├── 1.1.4.ini
│ │ ├── 1.1.5.ini
│ │ ├── 1.1.6.ini
│ │ ├── 1.1.7.ini
│ │ ├── 1.1.8.ini
│ │ ├── 1.1.9.ini
│ │ ├── 1.10.0.ini
│ │ ├── 1.10.1.ini
│ │ ├── 1.10.10.ini
│ │ ├── 1.10.11.ini
│ │ ├── 1.10.2.ini
│ │ ├── 1.10.3.ini
│ │ ├── 1.10.4.ini
│ │ ├── 1.10.5.ini
│ │ ├── 1.10.6.ini
│ │ ├── 1.10.7.ini
│ │ ├── 1.10.8.ini
│ │ ├── 1.10.9.ini
│ │ ├── 1.11.0-alpha0.ini
│ │ ├── 1.11.0-alpha1.ini
│ │ ├── 1.11.0-alpha2.ini
│ │ ├── 1.11.0-alpha3.ini
│ │ ├── 1.11.0-alpha4.ini
│ │ ├── 1.11.0-alpha5.ini
│ │ ├── 1.11.0-alpha6.ini
│ │ ├── 1.11.0-alpha7.ini
│ │ ├── 1.11.0-alpha8.ini
│ │ ├── 1.11.0-alpha9.ini
│ │ ├── 1.11.1-alpha0.ini
│ │ ├── 1.11.1-alpha1.ini
│ │ ├── 1.11.1-alpha2.ini
│ │ ├── 1.11.1-alpha3.ini
│ │ ├── 1.11.1-alpha4.ini
│ │ ├── 1.11.10.ini
│ │ ├── 1.11.11.ini
│ │ ├── 1.11.12.ini
│ │ ├── 1.11.13.ini
│ │ ├── 1.11.14.ini
│ │ ├── 1.11.15.ini
│ │ ├── 1.11.16.ini
│ │ ├── 1.11.2-alpha0.ini
│ │ ├── 1.11.2-alpha1.ini
│ │ ├── 1.11.2-beta0.ini
│ │ ├── 1.11.2.ini
│ │ ├── 1.11.3.ini
│ │ ├── 1.11.4.ini
│ │ ├── 1.11.5.ini
│ │ ├── 1.11.6.ini
│ │ ├── 1.11.7.ini
│ │ ├── 1.11.8.ini
│ │ ├── 1.11.9.ini
│ │ ├── 1.12.0-alpha0.ini
│ │ ├── 1.12.0-alpha1.ini
│ │ ├── 1.12.0-alpha2.ini
│ │ ├── 1.12.0-beta0.ini
│ │ ├── 1.12.0.ini
│ │ ├── 1.12.1.ini
│ │ ├── 1.12.2.ini
│ │ ├── 1.12.3.ini
│ │ ├── 1.13.0-alpha0.ini
│ │ ├── 1.13.0-alpha1.ini
│ │ ├── 1.13.0-alpha2.ini
│ │ ├── 1.13.0-alpha3.ini
│ │ ├── 1.13.0-alpha4.ini
│ │ ├── 1.13.0-beta0.ini
│ │ ├── 1.13.0-beta1.ini
│ │ ├── 1.13.0-beta2.ini
│ │ ├── 1.13.0-beta3.ini
│ │ ├── 1.13.0.ini
│ │ ├── 1.13.1.ini
│ │ ├── 1.13.2.ini
│ │ ├── 1.13.3.ini
│ │ ├── 1.13.4.ini
│ │ ├── 1.13.5.ini
│ │ ├── 1.13.6.ini
│ │ ├── 1.14.0.ini
│ │ ├── 1.14.1.ini
│ │ ├── 1.14.2.ini
│ │ ├── 1.2.0-alpha0.ini
│ │ ├── 1.2.0-alpha1.ini
│ │ ├── 1.2.0-beta0.ini
│ │ ├── 1.2.0-beta1.ini
│ │ ├── 1.2.0.ini
│ │ ├── 1.2.1.ini
│ │ ├── 1.2.10.ini
│ │ ├── 1.2.11.ini
│ │ ├── 1.2.12.ini
│ │ ├── 1.2.13.ini
│ │ ├── 1.2.14.ini
│ │ ├── 1.2.2.ini
│ │ ├── 1.2.3.ini
│ │ ├── 1.2.4.ini
│ │ ├── 1.2.5.ini
│ │ ├── 1.2.6.ini
│ │ ├── 1.2.7.ini
│ │ ├── 1.2.8.ini
│ │ ├── 1.2.9.ini
│ │ ├── 1.3.0.ini
│ │ ├── 1.3.1.ini
│ │ ├── 1.3.2.ini
│ │ ├── 1.3.3.ini
│ │ ├── 1.3.4.ini
│ │ ├── 1.3.5.ini
│ │ ├── 1.3.6.ini
│ │ ├── 1.3.7.ini
│ │ ├── 1.3.8.ini
│ │ ├── 1.3.9.ini
│ │ ├── 1.4.0-alpha0.ini
│ │ ├── 1.4.0-alpha1.ini
│ │ ├── 1.4.0-alpha2.ini
│ │ ├── 1.4.0-alpha3.ini
│ │ ├── 1.4.0-alpha4.ini
│ │ ├── 1.4.0-alpha5.ini
│ │ ├── 1.4.0-alpha6.ini
│ │ ├── 1.4.0-alpha7.ini
│ │ ├── 1.4.0-alpha8.ini
│ │ ├── 1.4.0-beta0.ini
│ │ ├── 1.4.0-beta1.ini
│ │ ├── 1.4.0-beta2.ini
│ │ ├── 1.4.0-beta3.ini
│ │ ├── 1.4.0.ini
│ │ ├── 1.4.1.ini
│ │ ├── 1.4.10.ini
│ │ ├── 1.4.2.ini
│ │ ├── 1.4.3.ini
│ │ ├── 1.4.4.ini
│ │ ├── 1.4.5.ini
│ │ ├── 1.4.6.ini
│ │ ├── 1.4.7.ini
│ │ ├── 1.4.8.ini
│ │ ├── 1.4.9.ini
│ │ ├── 1.5.0-alpha0.ini
│ │ ├── 1.5.0-alpha1.ini
│ │ ├── 1.5.0.ini
│ │ ├── 1.5.1.ini
│ │ ├── 1.5.2.ini
│ │ ├── 1.5.3.ini
│ │ ├── 1.5.4.ini
│ │ ├── 1.5.5.ini
│ │ ├── 1.5.6.ini
│ │ ├── 1.5.7.ini
│ │ ├── 1.5.8.ini
│ │ ├── 1.5.9.ini
│ │ ├── 1.6.0-alpha0.ini
│ │ ├── 1.6.0-alpha1.ini
│ │ ├── 1.6.0-alpha2.ini
│ │ ├── 1.6.0.ini
│ │ ├── 1.6.1.ini
│ │ ├── 1.6.2.ini
│ │ ├── 1.6.3.ini
│ │ ├── 1.6.4.ini
│ │ ├── 1.6.5.ini
│ │ ├── 1.6.6.ini
│ │ ├── 1.6.7.ini
│ │ ├── 1.7.0-alpha0.ini
│ │ ├── 1.7.0-alpha1.ini
│ │ ├── 1.7.0-alpha2.ini
│ │ ├── 1.7.0.ini
│ │ ├── 1.7.1.ini
│ │ ├── 1.7.2.ini
│ │ ├── 1.7.3.ini
│ │ ├── 1.7.4.ini
│ │ ├── 1.7.5.ini
│ │ ├── 1.7.6.ini
│ │ ├── 1.7.7.ini
│ │ ├── 1.7.8.ini
│ │ ├── 1.9.0-alpha0.ini
│ │ ├── 1.9.0-alpha1.ini
│ │ ├── 1.9.0-alpha2.ini
│ │ ├── 1.9.0-alpha3.ini
│ │ ├── 1.9.0-alpha4.ini
│ │ ├── 1.9.0-beta0.ini
│ │ ├── 1.9.0-beta1.ini
│ │ ├── 1.9.0-beta2.ini
│ │ ├── 1.9.0-beta3.ini
│ │ ├── 1.9.0.ini
│ │ ├── 1.9.1.ini
│ │ ├── 1.9.10.ini
│ │ ├── 1.9.11.ini
│ │ ├── 1.9.2.ini
│ │ ├── 1.9.3.ini
│ │ ├── 1.9.4.ini
│ │ ├── 1.9.5.ini
│ │ ├── 1.9.6.ini
│ │ ├── 1.9.7.ini
│ │ ├── 1.9.8.ini
│ │ ├── 1.9.9.ini
│ │ ├── index.idx
│ │ ├── mini_bed.stl
│ │ ├── mk2_bed.stl
│ │ ├── mk3_bed.stl
│ │ ├── mk4_bed.stl
│ │ ├── sl1_bed.stl
│ │ ├── sl1s_bed.stl
│ │ └── xl_bed.stl
│ ├── PrusaResearchSLA/
│ │ ├── 0.0.1.ini
│ │ ├── 1.0.0-alpha0.ini
│ │ ├── index.idx
│ │ ├── sl1_bed.stl
│ │ └── sl1s_bed.stl
│ ├── PrusaSlicer.version
│ ├── PrusaSlicer.version2
│ ├── RatRig/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.1.0.ini
│ │ ├── 1.1.1.ini
│ │ ├── README.md
│ │ ├── index.idx
│ │ ├── rr-vc-300.stl
│ │ ├── rr-vc-400.stl
│ │ ├── rr-vc-500.stl
│ │ └── rr-vminion.stl
│ ├── Rigid3D/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── index.idx
│ │ ├── mucit2_bed.stl
│ │ ├── mucit_bed.stl
│ │ └── zero_bed.stl
│ ├── Slic3rPE.version
│ ├── Snapmaker/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.1.0.ini
│ │ ├── 1.1.1.ini
│ │ ├── 1.1.2.ini
│ │ ├── A250_bed.stl
│ │ ├── A350_bed.stl
│ │ ├── Snapmaker A250_bed.stl
│ │ ├── Snapmaker A350_bed.stl
│ │ ├── Snapmaker Artisan_bed.stl
│ │ ├── Snapmaker J1_bed.stl
│ │ └── index.idx
│ ├── Sovol/
│ │ ├── 1.0.0.ini
│ │ ├── SV01_bed.stl
│ │ ├── SV03_bed.stl
│ │ ├── SV04_bed.stl
│ │ ├── SV05_bed.stl
│ │ ├── SV06PLUS_bed.stl
│ │ ├── SV06_bed.stl
│ │ └── index.idx
│ ├── Templates/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.0.4.ini
│ │ ├── 1.0.5.ini
│ │ └── index.idx
│ ├── TriLAB/
│ │ ├── 0.0.1.ini
│ │ ├── 0.0.2.ini
│ │ ├── 0.0.3.ini
│ │ ├── 0.0.4.ini
│ │ ├── 0.0.5.ini
│ │ ├── 0.0.6.ini
│ │ ├── 0.0.7.ini
│ │ ├── 0.0.8.ini
│ │ ├── 0.0.9.ini
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.0.4.ini
│ │ ├── 1.0.5.ini
│ │ ├── aq_bed.stl
│ │ ├── aqp_bed.stl
│ │ ├── dq2_bed.stl
│ │ └── index.idx
│ ├── Trimaker/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── CosmosII_bed.stl
│ │ ├── NebulaCloud_bed.stl
│ │ └── index.idx
│ ├── Ultimaker/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.1.0.ini
│ │ ├── index.idx
│ │ └── ultimaker2_bed.stl
│ ├── Voron/
│ │ ├── 1.0.0.ini
│ │ ├── 1.0.1.ini
│ │ ├── 1.0.2.ini
│ │ ├── 1.0.3.ini
│ │ ├── 1.0.4.ini
│ │ ├── index.idx
│ │ ├── printbed-SW-MK52.stl
│ │ ├── printbed-v0-120.stl
│ │ ├── printbed-v1-250.stl
│ │ ├── printbed-v1-300.stl
│ │ ├── printbed-v1-350.stl
│ │ ├── printbed-v2-250.stl
│ │ ├── printbed-v2-300.stl
│ │ └── printbed-v2-350.stl
│ ├── Zonestar/
│ │ ├── 1.0.0.ini
│ │ ├── bed_150.stl
│ │ ├── bed_220.stl
│ │ ├── bed_310.stl
│ │ └── index.idx
│ └── gCreate/
│ ├── 1.0.0.ini
│ ├── 1.0.1.ini
│ ├── gmax15p_bed.stl
│ ├── gmax2_bed.stl
│ └── index.idx
└── old/
├── Slic3r settings 175/
│ ├── filament/
│ │ ├── ColorFabb Brass Bronze 1.75mm.ini
│ │ ├── ColorFabb Wood Bamboo 1.75mm.ini
│ │ ├── ColorFabb XT 1.75mm.ini
│ │ ├── ColorFabb XT-CF20 1.75mm.ini
│ │ ├── Fillamentum ABS 1.75mm.ini
│ │ ├── Prusa ABS 1.75mm.ini
│ │ ├── Prusa FLEX 1.75mm.ini
│ │ ├── Prusa HIPS 1.75mm.ini
│ │ ├── Prusa PET 1.75mm.ini
│ │ ├── Prusa PLA 1.75mm.ini
│ │ ├── Taulman Bridge 1.75mm.ini
│ │ └── Taulman T-Glase 1.75mm.ini
│ ├── print/
│ │ ├── 0.05mm PLA ULTRADETAIL.ini
│ │ ├── 0.10mm DETAIL.ini
│ │ ├── 0.20mm FLEX.ini
│ │ ├── 0.20mm NORMAL.ini
│ │ └── 0.25mm DRAFT.ini
│ ├── printer/
│ │ ├── Prusa i3 1.75 FLEX.ini
│ │ └── Prusa i3 1.75.ini
│ ├── simple.ini
│ └── slic3r.ini
├── Slic3r settings 3mm/
│ ├── filament/
│ │ ├── Prusa ABS 2.85mm.ini
│ │ ├── Prusa HIPS 2.85mm.ini
│ │ ├── Prusa PET 2.85mm.ini
│ │ ├── Prusa PLA 2.85mm.ini
│ │ └── Prusa PP Flex 2.85mm.ini
│ ├── print/
│ │ ├── 0.15mm DETAIL.ini
│ │ ├── 0.20mm NORMAL.ini
│ │ ├── 0.28mm FAST.ini
│ │ └── Flex.ini
│ ├── printer/
│ │ ├── Prusa i3 Flex.ini
│ │ └── Prusa i3.ini
│ ├── simple.ini
│ └── slic3r.ini
└── Slic3r settings MK2S MK2MM and MK3/
├── filament/
│ ├── ColorFabb Brass Bronze 1.75mm.ini
│ ├── ColorFabb HT 1.75mm.ini
│ ├── ColorFabb PLA-PHA.ini
│ ├── ColorFabb Woodfil 1.75mm.ini
│ ├── ColorFabb XT 1.75mm.ini
│ ├── ColorFabb XT-CF20 1.75mm.ini
│ ├── ColorFabb nGen 1.75mm.ini
│ ├── ColorFabb nGen flex.ini
│ ├── E3D Edge.ini
│ ├── E3D PC-ABS 1.75mm.ini
│ ├── Fillamentum ABS 1.75mm.ini
│ ├── Fillamentum ASA 1.75mm.ini
│ ├── Fillamentum CPE HG100 HM100.ini
│ ├── Fillamentum Timberfil.ini
│ ├── Generic ABS 1.75mm.ini
│ ├── Generic PET 1.75mm.ini
│ ├── Generic PLA 1.75mm.ini
│ ├── Polymaker PC-Max.ini
│ ├── Primavalue PVA.ini
│ ├── Prusa ABS 1.75mm.ini
│ ├── Prusa HIPS 1.75mm.ini
│ ├── Prusa PET 1.75mm.ini
│ ├── Prusa PLA 1.75mm.ini
│ ├── SemiFlex or Flexfill 98A.ini
│ ├── Taulman Bridge 1.75mm.ini
│ ├── Taulman T-Glase 1.75mm.ini
│ ├── Verbatim BVOH.ini
│ └── Verbatim PP.ini
├── print/
│ ├── 0.05mm DETAIL 0.25 nozzle.ini
│ ├── 0.05mm DETAIL MK3.ini
│ ├── 0.05mm DETAIL.ini
│ ├── 0.10mm DETAIL 0.25 nozzle.ini
│ ├── 0.10mm DETAIL MK3.ini
│ ├── 0.10mm DETAIL.ini
│ ├── 0.15mm 100mms Linear Advance.ini
│ ├── 0.15mm OPTIMAL 0.25 nozzle.ini
│ ├── 0.15mm OPTIMAL 0.6 nozzle.ini
│ ├── 0.15mm OPTIMAL MK3.ini
│ ├── 0.15mm OPTIMAL SOLUBLE FULL.ini
│ ├── 0.15mm OPTIMAL SOLUBLE INTERFACE.ini
│ ├── 0.15mm OPTIMAL.ini
│ ├── 0.20mm 100mms Linear Advance.ini
│ ├── 0.20mm NORMAL 0.6 nozzle.ini
│ ├── 0.20mm NORMAL MK3.ini
│ ├── 0.20mm NORMAL SOLUBLE FULL.ini
│ ├── 0.20mm NORMAL SOLUBLE INTERFACE.ini
│ ├── 0.20mm NORMAL.ini
│ ├── 0.35mm FAST 0.6 nozzle.ini
│ ├── 0.35mm FAST MK3.ini
│ ├── 0.35mm FAST sol full 0.6 nozzle.ini
│ ├── 0.35mm FAST sol int 0.6 nozzle.ini
│ └── 0.35mm FAST.ini
├── printer/
│ ├── Original Prusa i3 MK2 0.25 nozzle.ini
│ ├── Original Prusa i3 MK2 0.6 nozzle.ini
│ ├── Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini
│ ├── Original Prusa i3 MK2 MM Single Mode.ini
│ ├── Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini
│ ├── Original Prusa i3 MK2 MultiMaterial.ini
│ ├── Original Prusa i3 MK2.ini
│ └── Original Prusa i3 MK3.ini
└── slic3r.ini
Copy disabled (too large)
Download .json
Condensed preview — 723 files, each showing path, character count, and a content snippet. Download the .json file for the full structured content (111,030K chars).
[
{
"path": "License",
"chars": 34523,
"preview": " GNU AFFERO GENERAL PUBLIC LICENSE\n Version 3, 19 November 2007\n\n Copyright (C)"
},
{
"path": "README.md",
"chars": 3600,
"preview": "# PrusaSlicer - settings \n\nThis repository is no longer used for __PrusaSlicer 2.8.0 and newer__. New repositories are l"
},
{
"path": "live/Anker/1.0.0.ini",
"chars": 10822,
"preview": "# Print profiles for the AnkerMake printers.\n# https://github.com/prusa3d/PrusaSlicer/pull/9075 by @just-trey\n\n[vendor]\n"
},
{
"path": "live/Anker/1.0.1.ini",
"chars": 10821,
"preview": "# Print profiles for the AnkerMake printers.\n# https://github.com/prusa3d/PrusaSlicer/pull/9075 by @just-trey\n\n[vendor]\n"
},
{
"path": "live/Anker/1.1.1.ini",
"chars": 10477,
"preview": "# Print profiles for the AnkerMake printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = AnkerMak"
},
{
"path": "live/Anker/1.1.2.ini",
"chars": 19129,
"preview": "# Print profiles for the AnkerMake printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = AnkerMak"
},
{
"path": "live/Anker/1.1.3.ini",
"chars": 19129,
"preview": "# Print profiles for the AnkerMake printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = AnkerMak"
},
{
"path": "live/Anker/License.txt",
"chars": 34522,
"preview": " GNU AFFERO GENERAL PUBLIC LICENSE\n Version 3, 19 November 2007\n\n Copyright (C)"
},
{
"path": "live/Anker/README.md",
"chars": 1331,
"preview": "\n\n\n# AnkerMake M5 Settings for PrusaSlicer\n\nThe official AnkerMake M5 setti"
},
{
"path": "live/Anker/index.idx",
"chars": 224,
"preview": "min_slic3r_version = 2.6.0-alpha4\n1.1.3 Fixed top solid infill extrusion width for M5C.\n1.1.2 Added AnkerMake M5C.\n1.1.1"
},
{
"path": "live/Anycubic/0.0.1.ini",
"chars": 40466,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.0.10.ini",
"chars": 77679,
"preview": "# Print profiles for the Anycubic printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = Anycu"
},
{
"path": "live/Anycubic/0.0.11.ini",
"chars": 75892,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.0.12.ini",
"chars": 75927,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.0.2.ini",
"chars": 71925,
"preview": "# Print profiles for the Anycubic printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = Anycu"
},
{
"path": "live/Anycubic/0.0.3.ini",
"chars": 70145,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.0.4.ini",
"chars": 69977,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.0.5.ini",
"chars": 69993,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.0.6.ini",
"chars": 69855,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.0.7.ini",
"chars": 69876,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.0.8.ini",
"chars": 69804,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.0.9.ini",
"chars": 69804,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.1.0.ini",
"chars": 86712,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.1.1.ini",
"chars": 86720,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.1.2.ini",
"chars": 87232,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.2.0.ini",
"chars": 90143,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.2.1.ini",
"chars": 91670,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.2.2.ini",
"chars": 93668,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.2.3.ini",
"chars": 95069,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.2.4.ini",
"chars": 95070,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.2.5.ini",
"chars": 95070,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.2.6.ini",
"chars": 97497,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.2.7.ini",
"chars": 97495,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/0.2.8.ini",
"chars": 97490,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic\n"
},
{
"path": "live/Anycubic/index.idx",
"chars": 1427,
"preview": "min_slic3r_version = 2.6.0-beta1\r\n0.2.8 Fixed compatible printer condition.\r\n0.2.7 Fixed compatible condition for MONO X"
},
{
"path": "live/AnycubicSLA/0.0.1.ini",
"chars": 727,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic "
},
{
"path": "live/AnycubicSLA/1.0.0.ini",
"chars": 9480,
"preview": "# Print profiles for the Anycubic printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Anycubic "
},
{
"path": "live/AnycubicSLA/index.idx",
"chars": 145,
"preview": "min_slic3r_version = 2.8.0-alpha0\n1.0.0 Initial bundle for PS2.8.0.\nmax_slic3r_version = 2.7.9\nmin_slic3r_version = 2.6."
},
{
"path": "live/Artillery/0.0.1.ini",
"chars": 16330,
"preview": "###############\n# AUTHOR: Szabolcs Hornyak / design85@gmail.com\n# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-geniu"
},
{
"path": "live/Artillery/0.0.2.ini",
"chars": 16241,
"preview": "###############\n# AUTHOR: Szabolcs Hornyak / design85@gmail.com\n# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-geniu"
},
{
"path": "live/Artillery/0.0.3.ini",
"chars": 16241,
"preview": "###############\n# AUTHOR: Szabolcs Hornyak / design85@gmail.com\n# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-geniu"
},
{
"path": "live/Artillery/0.0.4.ini",
"chars": 16267,
"preview": "###############\n# AUTHOR: Szabolcs Hornyak / design85@gmail.com\n# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-geniu"
},
{
"path": "live/Artillery/0.0.5.ini",
"chars": 17729,
"preview": "###############\n# AUTHOR: Szabolcs Hornyak / design85@gmail.com\n# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-geniu"
},
{
"path": "live/Artillery/0.0.6.ini",
"chars": 17729,
"preview": "###############\n# AUTHOR: Szabolcs Hornyak / design85@gmail.com\n# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-geniu"
},
{
"path": "live/Artillery/0.0.7.ini",
"chars": 19273,
"preview": "###############\n# AUTHOR: Szabolcs Hornyak / design85@gmail.com\n# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-geniu"
},
{
"path": "live/Artillery/0.0.8.ini",
"chars": 41459,
"preview": "###############\n# AUTHOR: Szabolcs Hornyak / design85@gmail.com\n# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-geniu"
},
{
"path": "live/Artillery/0.0.9.ini",
"chars": 41459,
"preview": "###############\n# AUTHOR: Szabolcs Hornyak / design85@gmail.com\n# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-geniu"
},
{
"path": "live/Artillery/index.idx",
"chars": 484,
"preview": "min_slic3r_version = 2.6.0\r\n0.0.9 Updated first layer height value.\r\n0.0.8 Support for the X3 and X4 series by porting s"
},
{
"path": "live/BIBO/0.0.1.ini",
"chars": 36758,
"preview": "# Print profiles for the BIBO printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = BIBO\r\n# C"
},
{
"path": "live/BIBO/0.0.2.ini",
"chars": 36791,
"preview": "# Print profiles for the BIBO printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = BIBO\r\n# C"
},
{
"path": "live/BIBO/0.0.3.ini",
"chars": 36671,
"preview": "# Print profiles for the BIBO printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = BIBO\r\n# C"
},
{
"path": "live/BIBO/0.0.4.ini",
"chars": 36679,
"preview": "# Print profiles for the BIBO printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = BIBO\r\n# C"
},
{
"path": "live/BIBO/0.0.5.ini",
"chars": 36695,
"preview": "# Print profiles for the BIBO printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = BIBO\r\n# C"
},
{
"path": "live/BIBO/0.0.6.ini",
"chars": 37248,
"preview": "# Print profiles for the BIBO printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = BIBO\r\n# C"
},
{
"path": "live/BIBO/0.0.7.ini",
"chars": 37248,
"preview": "# Print profiles for the BIBO printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = BIBO\r\n# C"
},
{
"path": "live/BIBO/index.idx",
"chars": 1691,
"preview": "min_slic3r_version = 2.4.1-beta3\n0.0.7 Correct missing profile improvement from 0.0.6 to set ensure_vertical_shell_thick"
},
{
"path": "live/BIBO/test.txt",
"chars": 3,
"preview": "aaa"
},
{
"path": "live/BIQU/0.1.0.ini",
"chars": 13019,
"preview": "# Print profiles for BIQU printers.\n# Based on PR https://github.com/slic3r/slic3r-profiles/pull/32 by @bkonosky\n\n\n[vend"
},
{
"path": "live/BIQU/index.idx",
"chars": 56,
"preview": "min_slic3r_version = 2.6.0-alpha1\n0.1.0 Initial version\n"
},
{
"path": "live/CocoaPress/1.0.0.ini",
"chars": 18874,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Cocoa Pre"
},
{
"path": "live/CocoaPress/1.0.1.ini",
"chars": 19185,
"preview": "# Print profiles for the Cocoa Press.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Cocoa Press\n# C"
},
{
"path": "live/CocoaPress/1.0.2.ini",
"chars": 19091,
"preview": "# Print profiles for the Cocoa Press.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Cocoa Press\n# C"
},
{
"path": "live/CocoaPress/1.0.3.ini",
"chars": 19087,
"preview": "# Print profiles for the Cocoa Press.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Cocoa Press\n# C"
},
{
"path": "live/CocoaPress/1.0.4.ini",
"chars": 24919,
"preview": "# Print profiles for the Cocoa Press.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Cocoa Press\n# C"
},
{
"path": "live/CocoaPress/1.0.5.ini",
"chars": 25088,
"preview": "# Print profiles for the Cocoa Press.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Cocoa Press\n# C"
},
{
"path": "live/CocoaPress/index.idx",
"chars": 441,
"preview": "min_slic3r_version = 2.6.0-alpha2\n1.0.5 Hotfix for 2.7.2 color change, as well as ramping prime line to reduce initial b"
},
{
"path": "live/Creality/0.0.10.ini",
"chars": 28606,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.11.ini",
"chars": 28786,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.12.ini",
"chars": 29713,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.13.ini",
"chars": 34583,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.14.ini",
"chars": 42188,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.15.ini",
"chars": 48098,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.16.ini",
"chars": 49291,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.17.ini",
"chars": 51323,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.2-beta.ini",
"chars": 13018,
"preview": "# Print profiles for the Creality printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = Creal"
},
{
"path": "live/Creality/0.0.2.ini",
"chars": 13013,
"preview": "# Print profiles for the Creality printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = Creal"
},
{
"path": "live/Creality/0.0.3.ini",
"chars": 14246,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.4.ini",
"chars": 26510,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.5.ini",
"chars": 27090,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.6.ini",
"chars": 28508,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.7.ini",
"chars": 28492,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.8.ini",
"chars": 28667,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.0.9.ini",
"chars": 28666,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.1.0.ini",
"chars": 54653,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.1.1.ini",
"chars": 55762,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.1.2.ini",
"chars": 56862,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.1.3.ini",
"chars": 56990,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.1.4.ini",
"chars": 58152,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.1.5.ini",
"chars": 61527,
"preview": "# Print profiles for the Creality printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname = Creal"
},
{
"path": "live/Creality/0.2.0.ini",
"chars": 82601,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.2.1.ini",
"chars": 85481,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.2.2.ini",
"chars": 89403,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.2.3.ini",
"chars": 91054,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.2.4.ini",
"chars": 104771,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.2.6.ini",
"chars": 109383,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.2.7.ini",
"chars": 110914,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/0.3.0.ini",
"chars": 110257,
"preview": "# Print profiles for the Creality printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Creality\n"
},
{
"path": "live/Creality/cr10_bed.stl",
"chars": 64176,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 152.105 -154.998 -3\n vertex 152.002 -154.998"
},
{
"path": "live/Creality/cr10max_bed.stl",
"chars": 64176,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 232.105 -234.998 -3\n vertex 232.002 -234.998"
},
{
"path": "live/Creality/cr10mini_bed.stl",
"chars": 64370,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 149.605 -117.498 -3\n vertex 149.502 -117.498"
},
{
"path": "live/Creality/cr10s4_bed.stl",
"chars": 64176,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 202.105 -204.998 -3\n vertex 202.002 -204.998"
},
{
"path": "live/Creality/cr10s5_bed.stl",
"chars": 64176,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 252.105 -254.998 -3\n vertex 252.002 -254.998"
},
{
"path": "live/Creality/cr10v2_bed.stl",
"chars": 64082,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 152.105 -159.998 -3\n vertex 152.002 -159.998"
},
{
"path": "live/Creality/cr200b_bed.stl",
"chars": 63840,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 97.1047 -99.9982 -3\n vertex 97.0018 -99.9982"
},
{
"path": "live/Creality/cr5pro_bed.stl",
"chars": 64266,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 147.105 -112.498 -3\n vertex 147.002 -112.498"
},
{
"path": "live/Creality/cr6se_bed.stl",
"chars": 64371,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 119.605 -127.498 -3\n vertex 119.502 -127.498"
},
{
"path": "live/Creality/cr8_bed.stl",
"chars": 64416,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 114.605 -117.498 -3\n vertex 114.502 -117.498"
},
{
"path": "live/Creality/ender2_bed.stl",
"chars": 63997,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 79.6047 -82.4982 -3\n vertex 79.5018 -82.4982"
},
{
"path": "live/Creality/ender3_bed.stl",
"chars": 115894,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 50.0698 -134.999 -3\n vertex 50.002 -134.999 "
},
{
"path": "live/Creality/ender3v2_bed.stl",
"chars": 64416,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 114.605 -117.498 -3\n vertex 114.502 -117.498"
},
{
"path": "live/Creality/ender5plus_bed.stl",
"chars": 64176,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 182.105 -184.998 -3\n vertex 182.002 -184.998"
},
{
"path": "live/Creality/ender6_bed.stl",
"chars": 64176,
"preview": "solid OpenSCAD_Model\n facet normal 0 0 -1\n outer loop\n vertex 127.105 -129.998 -3\n vertex 127.002 -129.998"
},
{
"path": "live/Creality/index.idx",
"chars": 2828,
"preview": "min_slic3r_version = 2.7.0\n0.3.0 Finetune Ironing, Add Idle Temperatures in start_code's, Add PolyMaker PolyTerra PLA, F"
},
{
"path": "live/Elegoo/1.0.0.ini",
"chars": 20605,
"preview": "# PrusaSlicer print profiles for the Elegoo printers.\r\n# By Andrew Suzuki (andrewsuzuki.com), adapted from Creality.ini\r"
},
{
"path": "live/Elegoo/1.0.1.ini",
"chars": 20605,
"preview": "# PrusaSlicer print profiles for the Elegoo printers.\r\n# By Andrew Suzuki (andrewsuzuki.com), adapted from Creality.ini\r"
},
{
"path": "live/Elegoo/1.0.2.ini",
"chars": 20618,
"preview": "# PrusaSlicer print profiles for the Elegoo printers.\r\n# By Andrew Suzuki (andrewsuzuki.com), adapted from Creality.ini\r"
},
{
"path": "live/Elegoo/1.0.3.ini",
"chars": 21852,
"preview": "# PrusaSlicer print profiles for the Elegoo printers.\r\n# By Andrew Suzuki (andrewsuzuki.com), adapted from Creality.ini\r"
},
{
"path": "live/Elegoo/index.idx",
"chars": 201,
"preview": "min_slic3r_version = 2.6.0-alpha1\r\n1.0.3 Added Eolas Prints filaments.\r\n1.0.2 Added new printer models.\r\nmin_slic3r_vers"
},
{
"path": "live/FLSun/0.0.1.ini",
"chars": 29984,
"preview": "# Print profiles for the FLSun Delta printers.\r\n## \r\n# Author: https://github.com/Foxies-CSTL/PrusaSlicer\r\n## Initial PR"
},
{
"path": "live/FLSun/0.0.2.ini",
"chars": 29937,
"preview": "# Print profiles for the FLSun Delta printers.\r\n## \r\n# Author: https://github.com/Foxies-CSTL/PrusaSlicer\r\n## Initial PR"
},
{
"path": "live/FLSun/index.idx",
"chars": 95,
"preview": "min_slic3r_version = 2.3.0-rc2\r\n0.0.2 Updated start g-code for QQ Pro.\r\n0.0.1 Initial Version\r\n"
},
{
"path": "live/Geeetech/0.1.0.ini",
"chars": 84066,
"preview": "# Print profiles for the Geeetech printers.\n# Author: Teddy.hu@geeetech.cn (2022.11.23)\n# https://github.com/prusa3d/Pr"
},
{
"path": "live/Geeetech/index.idx",
"chars": 70,
"preview": "min_slic3r_version = 2.6.0-alpha1\r\n0.1.0 Initial Geeetech bundle\r\n\r\n\r\n"
},
{
"path": "live/HartSmartProducts/0.1.0.ini",
"chars": 50731,
"preview": "# Print profiles for HartSmart Products printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Har"
},
{
"path": "live/HartSmartProducts/0.1.1.ini",
"chars": 51561,
"preview": "# Print profiles for HartSmart Products printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Har"
},
{
"path": "live/HartSmartProducts/index.idx",
"chars": 110,
"preview": "min_slic3r_version = 2.7.0\n0.1.1 Fix 2nd layer temperature issue and add Jabil ESD PETG\n0.1.0 Initial release\n"
},
{
"path": "live/INAT/0.0.1.ini",
"chars": 10584,
"preview": "# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC\n\n[vendor]\n# Vendor name will be shown by the Config"
},
{
"path": "live/INAT/0.0.2.ini",
"chars": 10563,
"preview": "# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC\n\n[vendor]\n# Vendor name will be shown by the Config"
},
{
"path": "live/INAT/0.0.3.ini",
"chars": 10631,
"preview": "# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC\n\n[vendor]\n# Vendor name will be shown by the Config"
},
{
"path": "live/INAT/0.0.4.ini",
"chars": 19205,
"preview": "# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Con"
},
{
"path": "live/INAT/index.idx",
"chars": 241,
"preview": "min_slic3r_version = 2.5.0-alpha0\r\n0.0.4 Improve Proton X profiles, Add Proton XE-750 printer\r\nmin_slic3r_version = 2.3."
},
{
"path": "live/Infinity3D/1.0.0.ini",
"chars": 23292,
"preview": "# Infinity3D profiles\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Infinity3D\n# Configuration vers"
},
{
"path": "live/Infinity3D/index.idx",
"chars": 66,
"preview": "min_slic3r_version = 2.5.0-alpha0\n1.0.0 Initial Infinity3D bundle\n"
},
{
"path": "live/Jubilee/1.0.0.ini",
"chars": 15442,
"preview": "# Jubilee profiles\n\n# Based on the profiles from: https://github.com/machineagency/jubilee/tree/main/software/slicer_set"
},
{
"path": "live/Jubilee/index.idx",
"chars": 64,
"preview": "min_slic3r_version = 2.4.1-alpha\r\n1.0.0 Initial Jubilee bundle\r\n"
},
{
"path": "live/LNL3D/0.0.1.ini",
"chars": 38175,
"preview": "# Print profiles for the LNL3D printers.\n\n########################################\n########## Vendor #######"
},
{
"path": "live/LNL3D/0.0.2.ini",
"chars": 38179,
"preview": "# Print profiles for the LNL3D printers.\n\n########################################\n########## Vendor #######"
},
{
"path": "live/LNL3D/0.0.3.ini",
"chars": 41212,
"preview": "# Print profiles for the LNL3D printers.\n\n########################################\n########## Vendor #######"
},
{
"path": "live/LNL3D/0.0.4.ini",
"chars": 41147,
"preview": "# Print profiles for the LNL3D printers.\n\n########################################\n########## Vendor #######"
},
{
"path": "live/LNL3D/index.idx",
"chars": 149,
"preview": "min_slic3r_version = 2.6.0\n0.0.4 Updated Start G-Codes.\n0.0.3 Added new printer profile.\n0.0.2 Updated initial layer hei"
},
{
"path": "live/LulzBot/0.0.1.ini",
"chars": 18527,
"preview": "# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Con"
},
{
"path": "live/LulzBot/0.0.2.ini",
"chars": 17918,
"preview": "# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC\n\n[vendor]\n# Vendor name will be shown by the Config"
},
{
"path": "live/LulzBot/0.1.0.ini",
"chars": 21985,
"preview": "# LulzBot profiles\n# Based on community profiles and original profiles from Cura LulzBot Edition.\n\n[vendor]\n# Vendor nam"
},
{
"path": "live/LulzBot/index.idx",
"chars": 189,
"preview": "min_slic3r_version = 2.3.0-beta2\r\n0.1.0 General rework. Added new print and filament profiles. \r\n0.0.2 Removed obsolete "
},
{
"path": "live/MakerGear/0.1.0.ini",
"chars": 81132,
"preview": "# Print profiles for the MakerGear printers.\r\n\r\n[vendor]\r\nname = MakerGear\r\nconfig_version = 0.1.0\r\nconfig_update_url = "
},
{
"path": "live/MakerGear/0.1.1.ini",
"chars": 79367,
"preview": "# Print profiles for the MakerGear printers.\n\n[vendor]\nname = MakerGear\nconfig_version = 0.1.1\nconfig_update_url = https"
},
{
"path": "live/MakerGear/index.idx",
"chars": 109,
"preview": "min_slic3r_version = 2.6.0-alpha1\r\n0.1.1 Adjusted M2, M2Dual and M3 starting scripts\r\n0.1.0 Initial version\r\n"
},
{
"path": "live/PapapiuLab/0.1.0.ini",
"chars": 14705,
"preview": "# Print profiles for Papapiu printers.\n[vendor]\nname = Papapiu\nconfig_version = 0.1.0\nconfig_update_url = https://files."
},
{
"path": "live/PapapiuLab/index.idx",
"chars": 55,
"preview": "min_slic3r_version = 2.6.0-alpha1\n0.1.0 Initial version"
},
{
"path": "live/Print4Taste/0.0.1.ini",
"chars": 5088,
"preview": "# Print profiles for Print4Taste printers (mycusini and procusini brands)\n# Created from scratch from default FFF\n\n[vend"
},
{
"path": "live/Print4Taste/index.idx",
"chars": 55,
"preview": "min_slic3r_version = 2.6.0-alpha1\n0.0.1 Initial version"
},
{
"path": "live/PrusaResearch/0.1.0.ini",
"chars": 40377,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.1.ini",
"chars": 40276,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.10.ini",
"chars": 47068,
"preview": "# Print profiles for the Prusa Research printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname ="
},
{
"path": "live/PrusaResearch/0.1.11.ini",
"chars": 45979,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.12.ini",
"chars": 45979,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.13.ini",
"chars": 45979,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.14.ini",
"chars": 45997,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.15.ini",
"chars": 45997,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.16.ini",
"chars": 45997,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.17.ini",
"chars": 45997,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.18.ini",
"chars": 45997,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.2.ini",
"chars": 41163,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.3.ini",
"chars": 42888,
"preview": "# Print profiles for the Prusa Research printers.\r\n\r\n[vendor]\r\n# Vendor name will be shown by the Config Wizard.\r\nname ="
},
{
"path": "live/PrusaResearch/0.1.4.ini",
"chars": 42520,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.5.ini",
"chars": 42565,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.6.ini",
"chars": 46147,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.7.ini",
"chars": 46281,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.8.ini",
"chars": 46021,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.1.9.ini",
"chars": 45981,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.0-alpha.ini",
"chars": 41841,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.0-alpha1.ini",
"chars": 47039,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.0-alpha2.ini",
"chars": 47229,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.0-alpha3.ini",
"chars": 47930,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.0-alpha7.ini",
"chars": 49462,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.0-alpha8.ini",
"chars": 49662,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.0-beta.ini",
"chars": 50074,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.0-beta2.ini",
"chars": 50491,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.0-beta3.ini",
"chars": 50414,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.0-beta4.ini",
"chars": 50447,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.0-beta5.ini",
"chars": 50582,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.1.ini",
"chars": 52301,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.2.ini",
"chars": 52259,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.3.ini",
"chars": 52294,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.4.ini",
"chars": 53974,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.5.ini",
"chars": 54259,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.6.ini",
"chars": 62563,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.7.ini",
"chars": 62563,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.8.ini",
"chars": 54259,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.2.9.ini",
"chars": 54259,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.3.0.ini",
"chars": 62563,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.3.1.ini",
"chars": 62563,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.3.10.ini",
"chars": 63097,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.3.11.ini",
"chars": 63095,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.3.2.ini",
"chars": 62571,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.3.3.ini",
"chars": 62746,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.3.4.ini",
"chars": 63078,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.3.5.ini",
"chars": 63078,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.3.6.ini",
"chars": 63096,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
},
{
"path": "live/PrusaResearch/0.3.7.ini",
"chars": 63096,
"preview": "# Print profiles for the Prusa Research printers.\n\n[vendor]\n# Vendor name will be shown by the Config Wizard.\nname = Pru"
}
]
// ... and 523 more files (download for full content)
About this extraction
This page contains the full source code of the prusa3d/PrusaSlicer-settings GitHub repository, extracted and formatted as plain text for AI agents and large language models (LLMs). The extraction includes 723 files (132.0 MB), approximately 26.3M tokens. Use this with OpenClaw, Claude, ChatGPT, Cursor, Windsurf, or any other AI tool that accepts text input. You can copy the full output to your clipboard or download it as a .txt file.
Extracted by GitExtract — free GitHub repo to text converter for AI. Built by Nikandr Surkov.