[
{
"path": ".gitattributes",
"content": "# Auto detect text files and perform LF normalization\n* text=auto\n"
},
{
"path": "3D_Printed_Cases/Adafruit_QT_Py/README.md",
"content": "# Adafruit QT Py\n\n\n"
},
{
"path": "3D_Printed_Cases/DevKitM_1/README.md",
"content": "# DevKitM-1\n\n"
},
{
"path": "3D_Printed_Cases/ESP32_S2_Saola_1/README.md",
"content": "# ESP32-S2-Saola-1\n\n"
},
{
"path": "3D_Printed_Cases/LILYGO_TTGO_T8_TF_Card_Slot/README.md",
"content": "# LILYGO-TTGO-T8-TF-Card-Slot\n\n"
},
{
"path": "3D_Printed_Cases/LILYGO_TTGO_T8_WOOR/README.md",
"content": "# LILYGO-TTGO-T8-WOOR\n\n"
},
{
"path": "3D_Printed_Cases/NodeMCU_32/README.md",
"content": "# NodeMCU-32 ESP32(38 pin)\n\nBoard Size: 54.8mm x 28mm\n\n\n"
},
{
"path": "3D_Printed_Cases/README.md",
"content": "# 3D Printed Cases\n\n \n\ni have created stl files to 3d print cases for the following boards.\n\n## ESP32-S2 Boards\n\nAdafruit QT Py \nUM FeatherS2 \nUM TinyS2 \nWemos S2 Mini \nDevKitM-1 \nESP32-S2-Saola-1 \nLILYGO-TTGO-T8-TF-Card-Slot \nLILYGO-TTGO-T8-WOOR \n\n\n## ESP32-S3 Boards\n\nS3_DevKitC_1 \n\n\n## ESP32 Boards\n\nNodeMCU-32 \n\n \n\nthese cases can be printed in PLA without supports.\n\n \n\nif you wish to edit the cases you can import the `.stl` files into Tinkercad and edit them to suit your needs.\n\n "
},
{
"path": "3D_Printed_Cases/S3_DevKitC_1/README.md",
"content": "# S3-DevKitC-1\n\n"
},
{
"path": "3D_Printed_Cases/UM_FeatherS2/README.md",
"content": "# UM FeatherS2\n\n\n"
},
{
"path": "3D_Printed_Cases/UM_TinyS2/README.md",
"content": "# UM TinyS2\n\n\n"
},
{
"path": "3D_Printed_Cases/Wemos_S2_Mini/README.md",
"content": "# Wemos S2 Mini\n\n\n\n\n\na different style case by Doyle4
\nS2_Mini_By_Doyle4.stl \n\n\n\n\n\n"
},
{
"path": "ESP32_Server_900u/ESP32_Server_900u.ino",
"content": "#include \n#include \"WiFi.h\"\n#include \"ESPAsyncWebServer.h\"\n#include \"esp_task_wdt.h\"\n#include \n#include \n#include \n#if ARDUINO_USB_CDC_ON_BOOT\n#error \"The menu option 'Tools / USB CDC On Boot' must be set to 'Disabled'\"\n#elif ARDUINO_USB_DFU_ON_BOOT\n#error \"The menu option 'Tools / USB DFU On Boot' must be set to 'Disabled'\"\n#elif ARDUINO_USB_MSC_ON_BOOT\n#error \"The menu option 'Tools / USB MSC On Boot' must be set to 'Disabled'\"\n#elif defined(CONFIG_IDF_TARGET_ESP32S2) | defined(CONFIG_IDF_TARGET_ESP32S3) // ESP32-S2/S3 BOARDS(usb emulation)\n#include \"USB.h\"\n#include \"USBMSC.h\"\n#include \"exfathax.h\"\n#elif defined(CONFIG_IDF_TARGET_ESP32) // ESP32 BOARDS\n#define USBCONTROL false // set to true if you are using usb control(wired up usb drive)\n#define usbPin 4 // set the pin you want to use for usb control\n#else\n#error \"Selected board not supported\"\n#endif\n\n // use PsFree [ true / false ]\n#define PSFREE true // use the newer psfree webkit exploit.\n // this is fairly stable but may fail which will require you to try and load the payload again.\n\n // use SD Card [ true / false ]\n#define USESD false // a FAT32 formatted SD Card will be used instead of the onboard flash for the storage. \n // this requires a board with a sd card slot or a sd card connected.\n\n // use the T-Dongle-S3 SD Card [ true / false ]\n#define USELILYSD false // a FAT32 formatted SD Card will be used instead of the onboard flash for the storage.\n // this requires a LilyGO T-Dongle-S3 to be used with a sd card inserted.\n\n // use FatFS not SPIFFS [ true / false ]\n#define USEFAT false // FatFS will be used instead of SPIFFS for the storage filesystem or for larger partitons on boards with more than 4mb flash. \n // you must select a partition scheme labeled with \"FAT\" or \"FATFS\" with this enabled.\n\n // use LITTLEFS not SPIFFS [ true / false ]\n#define USELFS false // LITTLEFS will be used instead of SPIFFS for the storage filesystem. \n // you must select a partition scheme labeled with \"SPIFFS\" with this enabled and USEFAT must be false.\n\n // enable internal goldhen.h [ true / false ]\n#define INTHEN true // goldhen is placed in the app partition to free up space on the storage for other payloads. \n // with this enabled you do not upload goldhen to the board, set this to false if you wish to upload goldhen.\n\n // enable autohen [ true / false ]\n#define AUTOHEN false // this will load goldhen instead of the normal index/payload selection page, use this if you only want hen and no other payloads. \n // you can update goldhen by uploading the goldhen payload to the board storage with the filename \"goldhen.bin\".\n\n // enable fan threshold [ true / false ]\n#define FANMOD true // this will include a function to set the consoles fan ramp up temperature in °C \n // this will not work if the board is a esp32 and the usb control is disabled.\n\n\n\n//-------------------DEFAULT SETTINGS------------------//\n\n // use config.ini [ true / false ]\n#define USECONFIG true // this will allow you to change these settings below via the admin webpage. \n // if you want to permanently use the values below then set this to false.\n\n//create access point\nboolean startAP = true;\nString AP_SSID = \"PS4_WEB_AP\";\nString AP_PASS = \"password\";\nIPAddress Server_IP(10, 1, 1, 1);\nIPAddress Subnet_Mask(255, 255, 255, 0);\n\n//connect to wifi\nboolean connectWifi = false;\nString WIFI_SSID = \"Home_WIFI\";\nString WIFI_PASS = \"password\";\nString WIFI_HOSTNAME = \"ps4.local\";\n\n//server port\nint WEB_PORT = 80;\n\n//Auto Usb Wait(milliseconds)\nint USB_WAIT = 10000;\n\n// Displayed firmware version\nString firmwareVer = \"1.00\";\n\n//ESP sleep after x minutes\nboolean espSleep = false;\nint TIME2SLEEP = 30; // minutes\n\n\n//-----------------------------------------------------//\n\n\n#include \"Loader.h\"\n#include \"Pages.h\"\n#include \"jzip.h\"\n\n#if USESD\n#include \"SD.h\"\n#include \"SPI.h\"\n#define SCK 12 // pins for sd card\n#define MISO 13 // these values are set for the LILYGO TTGO T8 ESP32-S2 board\n#define MOSI 11 // you may need to change these for other boards\n#define SS 10\n#define FILESYS SD\n#elif USELILYSD\n#include \"SD_MMC.h\"\n#define SD0 14\n#define SD1 17 // pins for the LilyGO T-Dongle-S3 sd card\n#define SD2 21 // do not change these values\n#define SD3 18 // the sd card slot is located in the usb A end of the dongle\n#define CLK 12\n#define CMD 16\n#define FILESYS SD_MMC\n#else\n#if USEFAT\n#include \"FFat.h\"\n#define FILESYS FFat\n#else\n#if USELFS\n#include \n#define FILESYS LittleFS\n#else\n#include \"SPIFFS.h\"\n#define FILESYS SPIFFS\n#endif\n#endif\n#endif\n\n#if INTHEN\n#include \"goldhen.h\"\n#endif\n\n#if (!defined(USBCONTROL) | USBCONTROL) && FANMOD\n#include \"fan.h\"\n#endif\n\nDNSServer dnsServer;\nAsyncWebServer server(WEB_PORT);\nboolean hasEnabled = false;\nboolean isFormating = false;\nlong enTime = 0;\nint ftemp = 70;\nlong bootTime = 0;\nFile upFile;\n#if defined(CONFIG_IDF_TARGET_ESP32S2) | defined(CONFIG_IDF_TARGET_ESP32S3)\nUSBMSC dev;\n#endif\n//USBCDC USBSerial;\n\n\n\nString split(String str, String from, String to) {\n String tmpstr = str;\n tmpstr.toLowerCase();\n from.toLowerCase();\n to.toLowerCase();\n int pos1 = tmpstr.indexOf(from);\n int pos2 = tmpstr.indexOf(to, pos1 + from.length());\n String retval = str.substring(pos1 + from.length(), pos2);\n return retval;\n}\n\n\nbool instr(String str, String search) {\n int result = str.indexOf(search);\n if (result == -1) {\n return false;\n }\n return true;\n}\n\n\nString formatBytes(size_t bytes) {\n if (bytes < 1024) {\n return String(bytes) + \" B\";\n } else if (bytes < (1024 * 1024)) {\n return String(bytes / 1024.0) + \" KB\";\n } else if (bytes < (1024 * 1024 * 1024)) {\n return String(bytes / 1024.0 / 1024.0) + \" MB\";\n } else {\n return String(bytes / 1024.0 / 1024.0 / 1024.0) + \" GB\";\n }\n}\n\n\nString urlencode(String str) {\n String encodedString = \"\";\n char c;\n char code0;\n char code1;\n char code2;\n for (int i = 0; i < str.length(); i++) {\n c = str.charAt(i);\n if (c == ' ') {\n encodedString += '+';\n } else if (isalnum(c)) {\n encodedString += c;\n } else {\n code1 = (c & 0xf) + '0';\n if ((c & 0xf) > 9) {\n code1 = (c & 0xf) - 10 + 'A';\n }\n c = (c >> 4) & 0xf;\n code0 = c + '0';\n if (c > 9) {\n code0 = c - 10 + 'A';\n }\n code2 = '\\0';\n encodedString += '%';\n encodedString += code0;\n encodedString += code1;\n }\n yield();\n }\n encodedString.replace(\"%2E\", \".\");\n return encodedString;\n}\n\n\nvoid sendwebmsg(AsyncWebServerRequest *request, String htmMsg) {\n String tmphtm = \"
\n"
},
{
"path": "3D_Printed_Cases/DevKitM_1/README.md",
"content": "# DevKitM-1\n\n
"
},
{
"path": "3D_Printed_Cases/ESP32_S2_Saola_1/README.md",
"content": "# ESP32-S2-Saola-1\n\n
"
},
{
"path": "3D_Printed_Cases/LILYGO_TTGO_T8_TF_Card_Slot/README.md",
"content": "# LILYGO-TTGO-T8-TF-Card-Slot\n\n
"
},
{
"path": "3D_Printed_Cases/LILYGO_TTGO_T8_WOOR/README.md",
"content": "# LILYGO-TTGO-T8-WOOR\n\n
"
},
{
"path": "3D_Printed_Cases/NodeMCU_32/README.md",
"content": "# NodeMCU-32 ESP32(38 pin)\n\nBoard Size: 54.8mm x 28mm\n\n
\n"
},
{
"path": "3D_Printed_Cases/README.md",
"content": "# 3D Printed Cases\n\n
"
},
{
"path": "3D_Printed_Cases/UM_FeatherS2/README.md",
"content": "# UM FeatherS2\n\n
\n"
},
{
"path": "3D_Printed_Cases/UM_TinyS2/README.md",
"content": "# UM TinyS2\n\n
\n"
},
{
"path": "3D_Printed_Cases/Wemos_S2_Mini/README.md",
"content": "# Wemos S2 Mini\n\n
\n\n
\n\n\n\n"
},
{
"path": "ESP32_Server_900u/ESP32_Server_900u.ino",
"content": "#include