Copy disabled (too large)
Download .txt
Showing preview only (10,104K chars total). Download the full file to get everything.
Repository: bigtreetech/BIQU-B1
Branch: master
Commit: 12ad1158b8a3
Files: 134
Total size: 9.5 MB
Directory structure:
gitextract_6bv4_tqd/
├── B1-IDEX firmware/
│ └── RRF/
│ ├── filaments/
│ │ └── nop.g
│ ├── gcodes/
│ │ └── nop.g
│ ├── macros/
│ │ ├── copy.g
│ │ ├── dualx.g
│ │ ├── mirror.g
│ │ └── wg.g
│ └── sys/
│ ├── bed.g
│ ├── board.txt
│ ├── config.g
│ ├── config.json
│ ├── deployprobe.g
│ ├── dwc-settings.json
│ ├── homeall.g
│ ├── homeu.g
│ ├── homex.g
│ ├── homey.g
│ ├── homez.g
│ ├── pause.g
│ ├── probe.g
│ ├── resume.g
│ ├── retractprobe.g
│ ├── sleep.g
│ ├── stop.g
│ ├── tfree0.g
│ ├── tfree1.g
│ ├── tpost0.g
│ ├── tpost1.g
│ ├── tpre0.g
│ └── tpre1.g
├── Firmware/
│ ├── 2021-04-28/
│ │ └── Screen-210609/
│ │ ├── Language Packs/
│ │ │ ├── language_am.ini
│ │ │ ├── language_ca.ini
│ │ │ ├── language_cn.ini
│ │ │ ├── language_cz.ini
│ │ │ ├── language_de.ini
│ │ │ ├── language_du.ini
│ │ │ ├── language_en.ini
│ │ │ ├── language_es.ini
│ │ │ ├── language_fr.ini
│ │ │ ├── language_gr.ini
│ │ │ ├── language_hu.ini
│ │ │ ├── language_it.ini
│ │ │ ├── language_jp.ini
│ │ │ ├── language_pl.ini
│ │ │ ├── language_pt.ini
│ │ │ ├── language_ru.ini
│ │ │ ├── language_sk.ini
│ │ │ ├── language_sl.ini
│ │ │ ├── language_tc.ini
│ │ │ ├── language_tr.ini
│ │ │ └── language_uk.ini
│ │ ├── TFT35/
│ │ │ ├── bmp/
│ │ │ │ └── readme.md
│ │ │ └── font/
│ │ │ ├── 8x16_byte_ascii.fon
│ │ │ ├── byte_ascii.fon
│ │ │ ├── large_byte_ascii.fon
│ │ │ ├── readme.md
│ │ │ └── word_unicode.fon
│ │ ├── config.ini
│ │ └── language_cn.ini
│ ├── 2022-03-27/
│ │ ├── Motherboard-2022-03-27/
│ │ │ ├── Motherboard-SKR 2-F407/
│ │ │ │ └── admin.txt
│ │ │ ├── Motherboard-SKR 2-F429/
│ │ │ │ └── admin.txt
│ │ │ └── Motherboard-SKR V1.4/
│ │ │ └── admin.txt
│ │ └── Screen-2022-03-27/
│ │ ├── BTT B1 TFT35 V3.0 - STM32/
│ │ │ ├── Language Packs/
│ │ │ │ ├── language_am.ini
│ │ │ │ ├── language_br.ini
│ │ │ │ ├── language_ca.ini
│ │ │ │ ├── language_cn.ini
│ │ │ │ ├── language_cz.ini
│ │ │ │ ├── language_de.ini
│ │ │ │ ├── language_en.ini
│ │ │ │ ├── language_es.ini
│ │ │ │ ├── language_fr.ini
│ │ │ │ ├── language_gr.ini
│ │ │ │ ├── language_hu.ini
│ │ │ │ ├── language_it.ini
│ │ │ │ ├── language_jp.ini
│ │ │ │ ├── language_nl.ini
│ │ │ │ ├── language_pl.ini
│ │ │ │ ├── language_pt.ini
│ │ │ │ ├── language_ru.ini
│ │ │ │ ├── language_sk.ini
│ │ │ │ ├── language_sl.ini
│ │ │ │ ├── language_tc.ini
│ │ │ │ ├── language_tr.ini
│ │ │ │ └── language_uk.ini
│ │ │ ├── TFT35/
│ │ │ │ ├── bmp/
│ │ │ │ │ └── readme.md
│ │ │ │ └── font/
│ │ │ │ ├── 8x16_byte_ascii.fon
│ │ │ │ ├── byte_ascii.fon
│ │ │ │ ├── large_byte_ascii.fon
│ │ │ │ ├── readme.md
│ │ │ │ └── word_unicode.fon
│ │ │ ├── admin.txt
│ │ │ ├── config.ini
│ │ │ └── language_cn.ini
│ │ └── BTT B1 TFT35 V3.0.1 - GD32/
│ │ ├── Language Packs/
│ │ │ ├── language_am.ini
│ │ │ ├── language_br.ini
│ │ │ ├── language_ca.ini
│ │ │ ├── language_cn.ini
│ │ │ ├── language_cz.ini
│ │ │ ├── language_de.ini
│ │ │ ├── language_en.ini
│ │ │ ├── language_es.ini
│ │ │ ├── language_fr.ini
│ │ │ ├── language_gr.ini
│ │ │ ├── language_hu.ini
│ │ │ ├── language_it.ini
│ │ │ ├── language_jp.ini
│ │ │ ├── language_nl.ini
│ │ │ ├── language_pl.ini
│ │ │ ├── language_pt.ini
│ │ │ ├── language_ru.ini
│ │ │ ├── language_sk.ini
│ │ │ ├── language_sl.ini
│ │ │ ├── language_tc.ini
│ │ │ ├── language_tr.ini
│ │ │ └── language_uk.ini
│ │ ├── TFT35/
│ │ │ ├── bmp/
│ │ │ │ └── readme.md
│ │ │ └── font/
│ │ │ ├── 8x16_byte_ascii.fon
│ │ │ ├── byte_ascii.fon
│ │ │ ├── large_byte_ascii.fon
│ │ │ ├── readme.md
│ │ │ └── word_unicode.fon
│ │ ├── admin.txt
│ │ ├── config.ini
│ │ └── language_cn.ini
│ ├── README.md
│ └── lpc176x_usb_driver.inf
├── Printed parts/
│ ├── Adapter plate cover-200331.STL
│ ├── Air guide-0519.STL
│ ├── Chassis TYPE-C interface protection cover.STL
│ ├── Consumable frame nut.STL
│ └── Nozzle TYPE-C protective cover.STL
├── README.md
└── TF card data/
└── English/
├── Setting files/
│ └── biqu-b1 configuration file.curaprofile
└── models/
├── CFFFP_Little Bear.gcode
└── CFFFP_Pokémon.gcode
================================================
FILE CONTENTS
================================================
================================================
FILE: B1-IDEX firmware/RRF/filaments/nop.g
================================================
;
================================================
FILE: B1-IDEX firmware/RRF/gcodes/nop.g
================================================
;
================================================
FILE: B1-IDEX firmware/RRF/macros/copy.g
================================================
M505 P"copy"
M98 P"config.g"
================================================
FILE: B1-IDEX firmware/RRF/macros/dualx.g
================================================
M505
M98 P"config.g"
================================================
FILE: B1-IDEX firmware/RRF/macros/mirror.g
================================================
M505 P"mirror"
M98 P"config.g"
================================================
FILE: B1-IDEX firmware/RRF/macros/wg.g
================================================
M557 X-50：110 Y10：210 S40
================================================
FILE: B1-IDEX firmware/RRF/sys/bed.g
================================================
; bed.g
; called to perform automatic bed compensation via G32
;
; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
T0
G1 X80Y80
G30
T1
G30 S-2
G1 Z30
T0
G29
================================================
FILE: B1-IDEX firmware/RRF/sys/board.txt
================================================
// Board Hardware configuration file for BTT SKR-2
// generated by RepRapFirmware Configuration Tool (LPC Version) v3.1.10+4-LPC
// on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
//Note: Each line should be less than 120 characters.
// : Unwanted options can be commented out or set to NoPin. Lines commented out will get default values
// : for pins the default is NoPin.
// : Values for Arrays need to be contained within { and }
// : Comments can be defined with // or # (comments are not supported inside arrays)
// : Each config entry must be all on a single line.
lpc.board = biquskr_2;
//LED blinks to indicate Platform is spinning or other diagnostic
//Comment out or set to NoPin if not wanted.
leds.diagnostic = NoPin;
//Internal SDCard SPI Frequency.
lpc.internalSDCard.spiFrequencyHz = 25000000;
//Only supports 1 External SDCard
//externalSDCard.csPin = NoPin;
//externalSDCard.cardDetectPin = NoPin;
//lpc.externalSDCard.spiFrequencyHz = 4000000;
//lpc.externalSDCard.spiChannel = 0;
heat.tempSensePins = {bedtemp, e0temp}; //Max of 3 entries
//heat.spiTempSensorCSPins = { }; //Max of 2 entries
//Analogue to Digital prefilter
adc.prefilter.enable = true
//ESP Settings
8266wifi.espDataReadyPin = B.10;
8266wifi.lpcTfrReadyPin = B.11;
8266wifi.espResetPin = C.14;
//ESP RX/TX Settings
8266wifi.serialRxTxPins = { PD_9, PD_8 } ;
stepper.enablePins = { PE_3, PD_6, PD_1, PC_7, PD_13, PC_4} ;
stepper.stepPins = {PE_2, PD_5, PA_15, PD_15, PD_11, PA_7} ;
stepper.directionPins = {PE_1, PD_4, PA_8, PD_14, PD_10, PB_2} ;
stepper.TmcUartPins = {PE_0, PD_3, PD_0, PC_6, PD_12, PE_11} ; //TMC Smart Drivers
stepper.numSmartDrivers = 6;
// External Display settings
serial.aux.rxTxPins = {PA_10, PA_9};
atx.powerPin = E.8;
atx.powerPinInverted = false
led.neopixelPin = E.6;
leds.diagnostic = A.13;
================================================
FILE: B1-IDEX firmware/RRF/sys/config.g
================================================
; Configuration file for BTT E3 RRF v1.0 (firmware version 3)
; executed by the firmware on start-up
;
; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
; General preferences
G90 ; send absolute coordinates...
M83 ; ...but relative extruder moves
M550 P"BTT-E3-RRF" ; set printer name
; Network
M552 S0
M586 P0 S1 ; enable HTTP
M586 P1 S0 ; disable FTP
M586 P2 S0 ; disable Telnet
; Drives
M569 P0 S0 ; physical drive 0 goes forwards using default driver timings
M569 P1 S1 ; physical drive 1 goes forwards using default driver timings
M569 P2 S1 ; physical drive 2 goes forwards using default driver timings
M569 P3 S0 ; physical drive 3 goes forwards using default driver timings
M569 P4 S1 ; physical drive 4 goes forwards using default driver timings
M569 P5 S0 ; physical drive 5 goes forwards using default driver timings
M584 X0 Y1 Z2 U5 E3:4 ; set drive mapping
M350 X16 Y16 U16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X80.00 Y80.00 U64.00 Z400.00 E93.00:93.00 ; set steps per mm
M566 X900.00 Y900.00 U900.00 Z60.00 E120.00 ; set maximum instantaneous speed changes (mm/min)
M203 X12000.00 Y12000.00 U12000.00 Z600.00 E1200.00 ; set maximum speeds (mm/min)
M201 X500.00 Y500.00 U500.00 Z20.00 E250.00 ; set accelerations (mm/s^2)
M906 X800 Y800 U800 Z800 E1200 I30 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout
; Axis Limits
M208 X-60 Y0 U0 Z-2 S1 ; set axis minima
M208 X90 Y235 U155 Z235 S0 ; set axis maxima
; Endstops
M574 X1 S1 P"!xstop" ; configure active-high endstop for low end on X via pin xstop
M574 U2 S1 P"PC15" ; configure active-high endstop for low end on X via pin xstop
M574 Y1 S1 P"!ystop" ; configure active-high endstop for low end on Y via pin ystop
M574 Z1 S2 P"^probe"
;M591 D0 P7 C"e0stop" S1 R50:130 L7.0 E10
;M591 D1 P7 C"e1stop" S1 R50:130 L7.0 E10
; Z-Probe
;M950 S0 C"servo0" ; create servo pin 0 for BLTouch
M558 P5 C"!^probe" H5 F120 T3000 ; set Z probe type to bltouch and the dive height + speeds
G31 Z0P500 ; set Z probe trigger value, offset and trigger height
M557 X0:160 Y10:230 S40 ; define mesh grid
M376 H10
; Heaters
M308 S0 P"bedtemp" Y"thermistor" T100000 B3950 ; configure sensor 0 as thermistor on pin bedtemp
M950 H0 C"bed" T0 ; create bed heater output on bed and map it to sensor 0
;M301 P21.73 I1.54 D76.55 ; disable bang-bang mode for the bed heater and set PWM limit
M307 H0 D120 B1 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
M140 H0 ; map heated bed to heater 0
M143 H0 S150 ; set temperature limit for heater 0 to 150C
M308 S1 P"e0temp" Y"thermistor" T100000 B3950 ; configure sensor 1 as thermistor on pin e0temp
M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
M143 H1 S300 ; set temperature limit for heater 1 to 300C
; T1
M308 S2 P"e1temp" Y"thermistor" T100000 B3950 ; configure sensor 1 as thermistor on pin e0temp
M950 H2 C"e1heat" T2 ; create nozzle heater output on e0heat and map it to sensor 1
M307 H2 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
M143 H2 S300 ; set temperature limit for heater 1 to 300C
; Fans
M950 F0 C"fan0" Q1000 ; create fan 0 on pin fan0 and set its frequency
M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
; EXP-Fans
M950 F1 C"fan2" Q1000 ; create fan 2 on pin fan0 and set its frequency
M106 P1 S255 H2 T45
M106 P1 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
M563 P0 D0 H1 F0:1 ; define tool 0
G10 P0 X0 Y0 Z0 S0 R0 ; set tool 0 axis offsets
M563 P1 D1 H2 X3 F0:1 ; define tool 0
G10 P1 Y0 U0 Z0 S0 R0
M563 P2 D0:1 H1:2 X0:3 F0:1 S"COPY"
G10 P2 X55 Y0 U-55 S0 R0
M567 P2 E1:1
M563 P3 D0:1 H1:2 X0:3 F0:1 S"MIRROR"
G10 P3 X-116.2 Y0 U0 S0 R0
M567 P3 E1:1
; Custom settings are not defined
M552 S1
; Miscellaneous
;M575 P1 S1 B57600 ; enable support for PanelDue
M575 P1 S2 B57600
M501
M150 X2
T0 P0
M375
================================================
FILE: B1-IDEX firmware/RRF/sys/config.json
================================================
{"board":"btt_rrf_e3_1.0","expansion_boards":[],"firmware":3,"standalone":true,"nvram":false,"auto_save":{"enabled":false,"save_threshold":10,"resume_threshold":11,"gcodes_to_run":"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000"},"display":{"type":0,"encoder_steps":4,"spi_frequency":2000000,"menus":[{"name":"main","value":""}],"images":[]},"externalSDCard":{"present":false,"spi_frequency":4000000},"geometry":{"type":"cartesian","mins":[0,0,0],"maxes":[235,235,250],"delta_radius":105.6,"homed_height":250,"low_dive_height":false,"max_carriage_travel":260,"print_radius":85,"rod_length":215,"z_min":0},"drives":[{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":80,"instant_dv":15,"max_speed":200,"acceleration":500,"current":580,"driver":0,"driver_v3":"0.0","endstop_pin":"xstop","endstop_type":1,"endstop_location":1,"stepperDriver":"TMC2209","stepperDriverTimings":""},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":80,"instant_dv":15,"max_speed":200,"acceleration":500,"current":580,"driver":1,"driver_v3":"0.1","endstop_pin":"ystop","endstop_type":1,"endstop_location":1,"stepperDriver":"TMC2209","stepperDriverTimings":""},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":400,"instant_dv":1,"max_speed":20,"acceleration":20,"current":580,"driver":2,"driver_v3":"0.2","endstop_pin":"zstop","endstop":null,"endstop_type":1,"endstop_location":1,"stepperDriver":"TMC2209","stepperDriverTimings":""},{"direction":1,"microstepping":16,"microstepping_interpolation":true,"steps_per_mm":93,"instant_dv":2,"max_speed":20,"acceleration":250,"current":650,"driver":3,"driver_v3":"0.3","stepperDriver":"TMC2209","stepperDriverTimings":""}],"idle":{"used":true,"factor":30,"timeout":30},"homing_speed_fast":30,"homing_speed_slow":6,"travel_speed":100,"z_dive_height":5,"slow_homing":false,"probe":{"type":"bltouch","recovery_time":0.4,"trigger_height":-1.85,"trigger_value":500,"x_offset":-40,"y_offset":-10,"speed":2,"deploy":true,"points":[],"pwm_channel":3,"pwm_inverted":true,"pwm_pin":"servo0","input_pin":"probe"},"bed_is_nozzle":false,"bed":{"present":true,"heater":0,"use_pid":false},"chamber":{"present":false,"use_pid":false,"heater":2},"heaters":[{"temp_limit":150,"scale_factor":100,"series":4700,"thermistor":100000,"beta":3950,"a":0.0005717725,"b":0.0002416626,"c":0,"channel":0,"sensor":0,"output_pin":"bed","sensor_type":"thermistor","sensor_pin":"bedtemp"},{"temp_limit":300,"scale_factor":100,"series":4700,"thermistor":100000,"beta":3950,"a":0.0005717725,"b":0.0002416626,"c":0,"channel":1,"sensor":1,"output_pin":"e0heat","sensor_type":"thermistor","sensor_pin":"e0temp"}],"num_nozzles":1,"toolchange_wait_for_temperatures":true,"generate_t_code":false,"tools":[{"mix_ratio":[],"number":0,"name":"","extruders":[0],"heaters":[1],"fans":[0],"x_offset":0,"y_offset":0,"z_offset":0}],"compensation_x_offset":15,"compensation_y_offset":15,"peripheral_points":3,"halfway_points":3,"calibration_factors":6,"probe_radius":85,"mesh":{"x_min":15,"x_max":215,"y_min":15,"y_max":215,"radius":85,"spacing":20},"home_first":false,"orthogonal":{"compensation":false,"height":50,"deviations":[0,0,0]},"network":{"enabled":true,"mac_address":"","name":"BTT-SKR-RRF-E3","password":"biqu2021","ssid":"biqu-m","ssid_password":"biqu2020","dhcp":true,"ip":"192.168.1.20","netmask":"255.255.255.0","gateway":"192.168.1.1","protocols":{"http":true,"ftp":false,"telnet":false},"espDataReadyPin":"0.28","lpcTfrReadyPin":"1.30","espResetPin":"1.31","espRXTX":true,"serialRxPin":"0.3","serialTxPin":"0.2","serialRxPinalt":"4.29","serialTxPinalt":"4.28"},"fans":[{"name":"","value":0,"inverted":false,"frequency":1000,"thermostatic":false,"heaters":[],"trigger_temperature":45,"output_pin":"fan0"},{"name":"","value":0,"inverted":false,"frequency":1000,"thermostatic":false,"heaters":[],"trigger_temperature":45,"output_pin":"fan1"}],"custom_settings":"","panelDue":true}
================================================
FILE: B1-IDEX firmware/RRF/sys/deployprobe.g
================================================
;if state.currentTool==0
;M106P3S255;
;if state.currentTool==1
;M106P2S255;
================================================
FILE: B1-IDEX firmware/RRF/sys/dwc-settings.json
================================================
{"main":{"language":"en","lastHostname":"192.168.1.103","darkTheme":false,"useBinaryPrefix":true,"disableAutoComplete":false,"settingsStorageLocal":false,"settingsSaveDelay":2000,"cacheStorageLocal":true,"cacheSaveDelay":4000,"notifications":{"errorsPersistent":true,"timeout":5000},"webcam":{"url":"","updateInterval":5000,"liveUrl":"","useFix":false,"embedded":false,"rotation":0,"flip":"none"},"enabledPlugins":["Height Map"],"plugins":{}},"machine":{"ajaxRetries":2,"updateInterval":250,"extendedUpdateEvery":20,"fileTransferRetryThreshold":358400,"crcUploads":true,"pingInterval":2000,"updateDelay":0,"babystepAmount":0.05,"codes":["G28","M0","M1","M114","M119","M122","M18","M82","M83","M84","T0","T1","m122","m92"],"displayedExtraTemperatures":[],"displayedExtruders":[0,1],"displayedFans":[-1,0,1,2],"moveSteps":{"X":[100,50,10,1,0.1],"Y":[100,50,10,1,0.1],"Z":[50,25,5,0.5,0.05],"default":[100,50,10,1,0.1]},"moveFeedrate":6000,"extruderAmounts":[100,50,20,10,5,1],"extruderFeedrates":[60,30,15,5,1],"temperatures":{"tool":{"active":[250,235,220,205,195,160,120,100,0],"standby":[210,180,160,140,0]},"bed":{"active":[110,100,90,70,65,60,0],"standby":[40,30,0]},"chamber":[90,80,70,60,50,40,0]},"spindleRPM":[10000,75000,5000,2500,1000,0],"enabledPlugins":[],"plugins":{}}}
================================================
FILE: B1-IDEX firmware/RRF/sys/homeall.g
================================================
; homeall.g
; called to home all axes
;
; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
T0 P0
G91 ; relative positioning
G1 H2 Z5 F6000 ; lift Z relative to current position
G1 H1 X-240 Y-240 U240 F1800 ; move quickly to X and Y axis endstops and stop there (first pass)
G1 H2 X5 Y5 U-5 F6000 ; go back a few mm
G1 H1 X-240 Y-240 U240 F360 ; move slowly to X and Y axis endstops once more (second pass)
G1X30Y30
G30
G1 Z5
================================================
FILE: B1-IDEX firmware/RRF/sys/homeu.g
================================================
; homex.g
; called to home the X axis
;
; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
G91 ; relative positioning
G1 H2 Z5 F6000 ; lift Z relative to current position
G1 H1 U240 F1800 ; move quickly to X axis endstop and stop there (first pass)
G1 H2 U-5 F6000 ; go back a few mm
G1 H1 U10 F360 ; move slowly to X axis endstop once more (second pass)
G1 H2 Z-5 F6000 ; lower Z again
G90 ; absolute positioning
================================================
FILE: B1-IDEX firmware/RRF/sys/homex.g
================================================
; homex.g
; called to home the X axis
;
; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
G91 ; relative positioning
G1 H2 Z5 F6000 ; lift Z relative to current position
G1 H1 X-240 F1800 ; move quickly to X axis endstop and stop there (first pass)
G1 H2 X5 F6000 ; go back a few mm
G1 H1 X-240 F360 ; move slowly to X axis endstop once more (second pass)
G1 H2 Z-5 F6000 ; lower Z again
G90 ; absolute positioning
================================================
FILE: B1-IDEX firmware/RRF/sys/homey.g
================================================
; homey.g
; called to home the Y axis
;
; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
G91 ; relative positioning
G1 H2 Z5 F6000 ; lift Z relative to current position
G1 H1 Y-240 F1800 ; move quickly to Y axis endstop and stop there (first pass)
G1 H2 Y5 F6000 ; go back a few mm
G1 H1 Y-240 F360 ; move slowly to Y axis endstop once more (second pass)
G1 H2 Z-5 F6000 ; lower Z again
G90 ; absolute positioning
================================================
FILE: B1-IDEX firmware/RRF/sys/homez.g
================================================
; homez.g
; called to home the Z axis
;
; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
T0 P0
G91 ; relative positioning
G1 H2 Z5 F6000 ; lift Z relative to current position
G30
G1 Z5 F100 ; lift Z relative to current position
================================================
FILE: B1-IDEX firmware/RRF/sys/pause.g
================================================
; pause.g
; called when a print from SD card is paused
;
; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
M83 ; relative extruder moves
G1 E-10 F3600 ; retract 10mm of filament
G91 ; relative positioning
G1 Z5 F360 ; lift Z by 5mm
G90 ; absolute positioning
G1 X0 Y0 F6000 ; go to X=0 Y=0
================================================
FILE: B1-IDEX firmware/RRF/sys/probe.g
================================================
================================================
FILE: B1-IDEX firmware/RRF/sys/resume.g
================================================
; resume.g
; called before a print from SD card is resumed
;
; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
G1 R1 X0 Y0 Z5 F6000 ; go to 5mm above position of the last print move
G1 R1 X0 Y0 ; go back to the last print move
M83 ; relative extruder moves
G1 E10 F3600 ; extrude 10mm of filament
================================================
FILE: B1-IDEX firmware/RRF/sys/retractprobe.g
================================================
;if state.currentTool==0
;M106P3S0;
;if state.currentTool==1
;M106P2S0;
================================================
FILE: B1-IDEX firmware/RRF/sys/sleep.g
================================================
; sleep.g
; called when M1 (Sleep) is being processed
;
; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
================================================
FILE: B1-IDEX firmware/RRF/sys/stop.g
================================================
; stop.g
; called when M0 (Stop) is run (e.g. when a print from SD card is cancelled)
;
; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 2021 17:25:01 GMT+0800 (中国标准时间)
================================================
FILE: B1-IDEX firmware/RRF/sys/tfree0.g
================================================
; tfree0.g
; called when tool 0 is freed
;
; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep 11 2020 20:17:50 GMT+0800 (中國標準時間)
G60 S0
G91
G1 Z3 F6000
M83
G1 E-2 F6000
G1 E-6 F3000
G1 H1 X-250 F7000
================================================
FILE: B1-IDEX firmware/RRF/sys/tfree1.g
================================================
; tfree1.g
; called when tool 1 is freed
;
; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep 11 2020 20:17:50 GMT+0800 (中國標準時間)
G60 S0
G91
G1 Z3 F6000
M83
G1 E-2 F6000
G1 E-6 F3000
G1 H1 U250 F7000
================================================
FILE: B1-IDEX firmware/RRF/sys/tpost0.g
================================================
; tpost0.g
; called after tool 0 has been selected
;
; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep 11 2020 20:17:50 GMT+0800 (中國標準時間)
; Wait for set temperatures to be reached
M116 P0
M83
G1 E-3
G1 R0 X0 F4000
G1 R0 Z0
G1 E3
================================================
FILE: B1-IDEX firmware/RRF/sys/tpost1.g
================================================
; tpost1.g
; called after tool 1 has been selected
;
; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep 11 2020 20:17:50 GMT+0800 (中國標準時間)
; Wait for set temperatures to be reached
M116 P1
M83
G1 E-3
G1 R0 X0 F4000
G1 R0 Z0
G1 E3
================================================
FILE: B1-IDEX firmware/RRF/sys/tpre0.g
================================================
================================================
FILE: B1-IDEX firmware/RRF/sys/tpre1.g
================================================
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_am.ini
================================================
#### Language Code:AM
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:BaudRate
label_language:Հայերեն
label_rotate_ui:Rotate UI
label_terminal_ack:Show ACK in Terminal
label_persistent_info:Persistent Status Info
label_file_list_mode:Files viewer List Mode
label_file_sort_by:Sort files by
label_ack_notification:ACK notification style
label_emulate_m600:Emulate M600
label_serial_always_on:Serial Always ON
label_marlin_fullscreen:Marlin mode in fullscreen
label_marlin_show_title:Marlin Mode Title Support
label_marlin_type:Marlin Mode Type
label_move_speed:Move speed(X Y Z)
label_auto_load_leveling:Auto Save Load Leveling
label_fan_speed_percent:Fan Speed As Percentage
label_xy_offset_probing:XY Offset Probing Support
label_z_steppers_alignment:Z Steppers Auto-Alignment
label_ps_on:Auto Power
label_fil_runout:Filament sensor
label_pl_recovery_en:Power loss recovery
label_pl_recovery_home:Power Loss Recovery Homing
label_btt_mini_ups:BTT UPS Support
label_touch_sound:Touch sounds
label_toast_sound:Toast Notifications
label_alert_sound:Popups and Alerts
label_heater_sound:Heater notification
label_knob_led_color:Rotary Knob LED
label_knob_led_idle:Rotary Knob LED idle
label_lcd_brightness:Brightness
label_lcd_idle_brightness:Idle brightness
label_lcd_idle_delay:Idle timeout
label_start_gcode_enabled:Start Gcode before print
label_end_gcode_enabled:End Gcode after print
label_cancel_gcode_enabled:Cancel Gcode
label_steps_setting:Steps per mm
label_maxfeedrate:Max Feed Rate
label_maxacceleration:Max Acceleration
label_acceleration:Acceleration
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:Home Offset
label_fwretract:FW Retraction
label_fwrecover:FW Retraction Recover
label_retract_auto:Auto Firmware Retract
label_hotend_offset:Offset 2nd Nozzle
label_probe_offset:Probe Offset
label_lin_advance:Linear Advance
label_filament_setting:Filament Diameter
label_current_setting:Driver Current (mA)
label_bump_sensitivity:TMC bump sensitivity
label_hybrid_threshold:TMC HybridThreshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:Print Acceleration
label_retract_acceleration:Retract Acceleration
label_travel_acceleration:Travel Acceleration
label_retract_length:Retract length
label_retract_swap_length:Retract swap length
label_retract_feedrate:Retract feedrate
label_retract_z_lift:Z lift on retraction
label_recover_length:Extra recover length
label_swap_recover_length:Extra recover swap length
label_recover_feedrate:Recover feedrate
label_swap_recover_feedrate:Swap recover feedrate
label_mbl_offset:MBL Offset
label_save:Save
label_restore:Restore
label_reset:Reset
label_eeprom_save_info:Save printer settings to EEPROM?
label_eeprom_restore_info:Reload settings from EEPROM?
label_eeprom_reset_info:Reset EEPROM to stock printer settings?
label_settings_save:Save settings
label_settings_restore:Restore settings
label_settings_reset:Reset default settings
label_settings_reset_info:Reset all settings to default values?
label_settings_reset_done:Reset all settings successful.\nPlease restart the device.
label_page_up:Վերեւ
label_page_down:Ներքեւ
label_up:Up
label_down:Down
label_next:Next
label_back:Հետ
label_inc:Ավելացնել
label_dec:Նվազեցնել
label_load:Load
label_unload:Unload
label_on:ON
label_off:OFF
label_auto:AUTO
label_smart:SMART
label_slow:Դանդաղ
label_normal:Նորմալ
label_fast:Արագ
label_zero:Zero
label_half:Կիսատ
label_full:Ամբողջը
label_custom:Custom
label_clear:Clear
label_default:Default
label_start:Start
label_stop:Դադարեցնել
label_pause:Կանգնեցնել
label_resume:Շարունակել
label_init:Init
label_disconnect:Անջատել
label_shut_down:Shut Down
label_force_shut_down:Force
label_emergencystop:EM. STOP
label_preheat:Preheat
label_preheat_both:Both
label_cooldown:Cool Down
label_confirm:Confirm
label_cancel:Չեղարկել
label_warning:Warning
label_continue:Շարունակել
label_confirmation:Are you sure?
label_status:Status
label_ready:Պատրաստ
label_busy:Ծանրաբեռնված է
label_loading:Բեռնում է...
label_unconnected:Տպիչը կցված չէ
label_info:Info
label_invalid_value:Invalid value(s)
label_timeout_reached:Timeout reached!
label_disconnect_info:Now you can control the printer by your computer!
label_shutting_down:Shutting down...
label_wait_temp_shut_down:Wait for the temperature of hotend to be lower than %d℃
label_power_failed:Տպելը չի ավարտվել, շարունակե՞լ
label_process_running:Process already running!
label_process_completed:Process completed!
label_process_aborted:Process aborted!
label_tftsd:TFT SD
label_read_tftsd_error:TFTSD հիշողության սարքը չկա
label_tftsd_inserted:Card inserted!
label_tftsd_removed:Card removed!
label_u_disk:U Disk
label_read_u_disk_error:Read U Disk error!
label_u_disk_inserted:U Disk inserted!
label_u_disk_removed:U Disk removed!
label_onboardsd:OnboardSD
label_read_onboardsd_error:OnboardSD հիշողության սարքը չկա
label_filament_runout:Filament runout!
label_disable_steppers:Disarm All
label_xy_unlock:Disarm XY
label_start_print:Start Printing:\n%s?
label_stop_print:Stop printing?
label_is_pause:Unable to extrude when printing.\nPause printing?
label_m0_pause:Paused by M0 command
label_test:Test
label_deploy:Deploy
label_stow:Stow
label_repeat:Repeat
label_nozzle:Գլխիկ
label_bed:Տախտակ
label_chamber:Chamber
label_fan:Հովացնել
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Sec.
label_10_seconds:10 Sec.
label_30_seconds:30 Sec.
label_60_seconds:1 Min.
label_120_seconds:2 Min.
label_300_seconds:5 Min.
label_white:White
label_black:Black
label_blue:Blue
label_red:Red
label_green:Green
label_cyan:Cyan
label_yellow:Yellow
label_brown:Brown
label_gray:Gray
label_orange:Orange
label_indigo:Indigo
label_violet:Violet
label_magenta:Magenta
label_purple:Purple
label_lime:Lime
label_darkblue:DarkBlue
label_darkgreen:DarkGreen
label_darkgray:DarkGray
label_heat:Ջերմություն
label_move:Շարժել
label_home:Սկզբնական
label_print:Տպել
label_extrude:Հալել
label_settings:Կարգավորումներ
label_screen_settings:Screen
label_machine_settings:Machine
label_marlin_mode_settings:MarlinMode
label_feature_settings:Feature
label_sound:Sound
label_rgb_settings:LED Color
label_rgb_off:LED Off
label_terminal:Terminal
label_leveling:Leveling
label_point_1:Point 1
label_point_2:Point 2
label_point_3:Point 3
label_point_4:Point 4
label_point_5:Point 5
label_bed_leveling:Bed Level
label_bl_complete:Bed Leveling Complete
label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save!
label_bl_enable:BL: on
label_bl_disable:BL: off
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh Bed Leveling
label_abl_settings:Auto Bed Leveling
label_abl_settings_bbl:Bilinear Bed Leveling
label_abl_settings_ubl:Unified Bed Leveling
label_abl_settings_ubl_save:Save to slot
label_abl_settings_ubl_load:Load from slot
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot?
label_abl_z:Z Fade
label_level_corner:L corner
label_p_offset:P Offset
label_h_offset:H Offset
label_distance:Distance
label_load_unload:Load/Unload
label_load_unload_short:(Un)Load
label_touchscreen_adjust:TSC Adjust
label_more:More
label_screen_info:Info
label_bg_color:Background color
label_font_color:Font color
label_percentage:Percentage
label_percentage_speed:Արագություն
label_percentage_flow:Flow
label_babystep:Դանդաղ
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Էկրանի կարգավորում
label_adjust_info:Please click on the red dot
label_adjust_ok:Adjustment Success
label_adjust_failed:Adjustment failed, Please Try Again.
label_unifiedmove:Movement
label_unifiedheat:Heat&Fan
label_touch_to_exit:Touch anywhere to exit
label_mainmenu:Menu
label_parameter_setting:Պարամետր
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Bed edge distance
label_tuning:Tuning
label_pid:PID
label_pid_title:PID autotune
label_pid_start_info:PID autotune may take some time to complete.\nContinue?
label_pid_start_info_2:PID autotune in progress!
label_pid_start_info_3:Do not touch the screen until completed (green LED ON)!
label_tune_extruder:Tune steps
label_tune_ext_extrude_100:Ext. 100mm
label_tune_ext_temp:Extruder tuning | Heat
label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
label_tune_ext_heatoff:Turn the heater off?
label_tune_ext_adj_esteps:Adjust E-Steps
label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
label_tune_ext_measured:Length remaining:
label_tune_ext_old_estep:Old e-steps: %0.2f
label_tune_ext_new_estep:New e-steps: %0.2f
label_connection_settings:Connection
label_notifications:Notifications
label_mesh_editor:Mesh edit
label_mesh_tuner:Mesh tuner
label_case_light:Case light
label_load_started:Loading filament.\nPlease wait for the process to complete.
label_unload_started:Unloading filament.\nPlease wait for the process to complete.
label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
label_print_finished: Print\n finished
label_main_screen:Main
label_previous_print_data:Brief
label_print_time:Print Time: %02u:%02u:%02u
label_filament_length:\nFilament length: %1.2fm
label_filament_weight:\nFilament weight: %1.2fg
label_filament_cost:\nFilament cost: %1.2f
label_no_filament_stats:\nFilament data not available.
label_click_for_more:Click for summary
label_ext_templow:Hotend temperature is below minimum temperature (%d℃).
label_heat_hotend:Heat hotend to %d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Z Align
label_macros:Macros
label_mesh_valid:Mesh Validation
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_ca.ini
================================================
#### Language Code:CA
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:Velocitat de transmissió
label_language:Català
label_rotate_ui:Rotar
label_terminal_ack:Mostra ACK a la terminal
label_persistent_info:Informació d'estat persistent
label_file_list_mode:Mode de visualització de fitxers
label_file_sort_by:Sort files by
label_ack_notification:ACK notification style
label_emulate_m600:Emulate M600
label_serial_always_on:Serial Always ON
label_marlin_fullscreen:Mode Marlin a pantalla completa
label_marlin_show_title:Marlin Mode Title Support
label_marlin_type:Marlin Mode Type
label_move_speed:Velocitat de moviment(X Y Z)
label_auto_load_leveling:Auto Save Load Leveling
label_fan_speed_percent:Fan Speed As Percentage
label_xy_offset_probing:XY Offset Probing Support
label_z_steppers_alignment:Z Steppers Auto-Alignment
label_ps_on:Apag. aut.
label_fil_runout:Sensor de filament
label_pl_recovery_en:Recuperació de pèrdua d’energia
label_pl_recovery_home:Power Loss Recovery Homing
label_btt_mini_ups:BTT UPS Support
label_touch_sound:Touch sounds
label_toast_sound:Toast Notifications
label_alert_sound:Popups and Alerts
label_heater_sound:Heater notification
label_knob_led_color:Perilla rotativa LED
label_knob_led_idle:Rotary Knob LED idle
label_lcd_brightness:Lluminositat
label_lcd_idle_brightness:Dim Lluminositat LCD
label_lcd_idle_delay:Temporitzador inactiu LCD
label_start_gcode_enabled:Enviar Gcode inicial
label_end_gcode_enabled:Enviar Gcode final
label_cancel_gcode_enabled:Cancel · lar Gcode
label_steps_setting:Passos per MM
label_maxfeedrate:Max Feed Rate
label_maxacceleration:Max Acceleració
label_acceleration:Acceleració
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:Home Offset
label_fwretract:Retracció de FW
label_fwrecover:Recuperació de Retracció de FW
label_retract_auto:Auto Firmware Retract
label_hotend_offset:Offset 2nd Nozzle
label_probe_offset:Sonda Compensar
label_lin_advance:Avanç Lineal
label_filament_setting:Filament Diameter
label_current_setting:Corrent del Driver (mA)
label_bump_sensitivity:Sensibilitat al topall TMC
label_hybrid_threshold:TMC HybridThreshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:Acceleració Impressió
label_retract_acceleration:Acceleració Retracció
label_travel_acceleration:Acceleració Viatge
label_retract_length:Longitud Retracció
label_retract_swap_length:Distància retracció intercanvi
label_retract_feedrate:Velocitat Retracció
label_retract_z_lift:Z aixecament a la retracció
label_recover_length:Distancia recuperació extra
label_swap_recover_length:Distancia recuperació intercanvi extra
label_recover_feedrate:Velocitat recuperació
label_swap_recover_feedrate:Velocitat recuperació intercanvi
label_mbl_offset:MBL Offset
label_save:Gravar
label_restore:Restore
label_reset:Reset
label_eeprom_save_info:Desa la configuració de la impressora a la EEPROM?
label_eeprom_restore_info:Carregar la configuració de EEPROM?
label_eeprom_reset_info:Reset EEPROM to stock printer settings?
label_settings_save:Save settings
label_settings_restore:Restaura la configuració
label_settings_reset:Restableix la configuració
label_settings_reset_info:Restableix tota la configuració a valors predeterminats?
label_settings_reset_done:Restableix tota la configuració aconseguit.\nreinicieu el dispositiu.
label_page_up:Retrocedir
label_page_down:Avançar
label_up:Amunt
label_down:Avall
label_next:Next
label_back:Tornar
label_inc:Augmentar
label_dec:Disminur
label_load:Carregar
label_unload:Descarregar
label_on:ON
label_off:OFF
label_auto:AUTO
label_smart:SMART
label_slow:Lent
label_normal:Normal
label_fast:Ràpid
label_zero:Zero
label_half:Meitat
label_full:Màxim
label_custom:Personalitzar
label_clear:Clear
label_default:Default
label_start:Començar
label_stop:Parar
label_pause:Pausar
label_resume:Continuar
label_init:Init
label_disconnect:Desconnectar
label_shut_down:Apagar
label_force_shut_down:Forçar Apagat
label_emergencystop:PARADA EMERGENCIA
label_preheat:Preescalfar
label_preheat_both:Tots dos
label_cooldown:Refredar
label_confirm:Confirmar
label_cancel:Cancel · lar
label_warning:Advertència
label_continue:Continuar
label_confirmation:Estàs segur?
label_status:Estat
label_ready:A punt!!
label_busy:Processament ocupat, si us plau esperi ...
label_loading:Carregant ...
label_unconnected:No hi ha comunicació amb impressora!
label_info:Informació
label_invalid_value:Invalid value(s)
label_timeout_reached:Timeout reached!
label_disconnect_info:Ara pot controlar la impressora des del seu ordinador!
label_shutting_down:Apagant...
label_wait_temp_shut_down:Espereu que la temperatura del hotend sigui inferior a %d℃
label_power_failed:¿Continuar imprimint?
label_process_running:Process already running!
label_process_completed:Process completed!
label_process_aborted:Process aborted!
label_tftsd:SD TFT
label_read_tftsd_error:Error a la targeta SD TFT!
label_tftsd_inserted:¡Targeta inserida!
label_tftsd_removed:¡Targeta extreta!
label_u_disk:Pendrive
label_read_u_disk_error:¡Error al Pendrive!
label_u_disk_inserted:¡Pendrive inserit!
label_u_disk_removed:¡Pendrive extret!
label_onboardsd:SD Placa
label_read_onboardsd_error:Error a la targeta SD de la placa!
label_filament_runout:¡Filament esgotat!
label_disable_steppers:Disarm All
label_xy_unlock:Disarm XY
label_start_print:Comenceu a imprimir:\n%s?
label_stop_print:Voleu aturar la impressió?
label_is_pause:No es pot extruir al imprimir,¿\nPausar la impressió?
label_m0_pause:En pausa per l'ordre M0
label_test:Provar
label_deploy:Desplegar
label_stow:Plegar
label_repeat:Repetir
label_nozzle:Nozzle
label_bed:Llit
label_chamber:Cambra
label_fan:Ventilar
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Sec.
label_10_seconds:10 Sec.
label_30_seconds:30 Sec.
label_60_seconds:1 Min.
label_120_seconds:2 Min.
label_300_seconds:5 Min.
label_white:Blanc
label_black:Negre
label_blue:Blau
label_red:Vermell
label_green:Verd
label_cyan:Cian
label_yellow:groc
label_brown:marró
label_gray:Gris
label_orange:taronja
label_indigo:Índigo
label_violet:violeta
label_magenta:Magenta
label_purple:Porpra
label_lime:Llima
label_darkblue:Blau fosc
label_darkgreen:Verd fosc
label_darkgray:Gris fosc
label_heat:Escalfar
label_move:Moure
label_home:Origen
label_print:Imprimir
label_extrude:Extruir
label_settings:Configura
label_screen_settings:Pantalla
label_machine_settings:Màquina
label_marlin_mode_settings:MarlinMode
label_feature_settings:Afegits
label_sound:Sound
label_rgb_settings:Color LED
label_rgb_off:Apagar LED
label_terminal:Terminal
label_leveling:Anivellar
label_point_1:Punt 1
label_point_2:Punt 2
label_point_3:Punt 3
label_point_4:Punt 4
label_point_5:Punt 5
label_bed_leveling:Bed Level
label_bl_complete:Nivellat del llit completat
label_bl_smart_fill:Falten punts de prova s'han omplert de forma intel·ligent.\n\nNota: recordeu guardar!
label_bl_enable:BL: on
label_bl_disable:BL: off
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh Bed Leveling
label_abl_settings:Auto Bed Leveling
label_abl_settings_bbl:Nivellament del llit Bilinear
label_abl_settings_ubl:Nivellament de llit unificat
label_abl_settings_ubl_save:Desa a la ranura
label_abl_settings_ubl_load:Carrega des de la ranura
label_abl_slot0:Ranura 0
label_abl_slot1:Ranura 1
label_abl_slot2:Ranura 2
label_abl_slot3:Ranura 3
label_abl_slot_eeprom:Recordar la ranura per al proper reinici? (Guardar EEPROM)
label_abl_z:Z Fade
label_level_corner:L corner
label_p_offset:P Offset
label_h_offset:H Offset
label_distance:Distance
label_load_unload:Load/Unload
label_load_unload_short:(Un)Load
label_touchscreen_adjust:Calibrar
label_more:Més
label_screen_info:Informar
label_bg_color:Color de fons
label_font_color:Color de lletra
label_percentage:Percentatge
label_percentage_speed:Velocitat
label_percentage_flow:Flux
label_babystep:BabyStep
label_x_inc:+X
label_y_inc:+Y
label_z_inc:+Z
label_x_dec:-X
label_y_dec:-Y
label_z_dec:-Z
label_x:X
label_y:Y
label_z:Z
label_adjust_title:¡Calibrar la pantalla tàctil
label_adjust_info:Si us plau feu clic al punt vermell
label_adjust_ok:Ajust correcte
label_adjust_failed:Ajust fallit, si us plau intenteu de nou
label_unifiedmove:Moviment
label_unifiedheat:Calor/Ventilador
label_touch_to_exit:Toca qualsevol lloc per sortir
label_mainmenu:Menú
label_parameter_setting:Paràmetre
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Bed edge distance
label_tuning:Tuning
label_pid:PID
label_pid_title:PID autotune
label_pid_start_info:PID autotune may take some time to complete.\nContinue?
label_pid_start_info_2:PID autotune in progress!
label_pid_start_info_3:Do not touch the screen until completed (green LED ON)!
label_tune_extruder:Tune steps
label_tune_ext_extrude_100:Ext. 100mm
label_tune_ext_temp:Extruder tuning | Heat
label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
label_tune_ext_heatoff:Turn the heater off?
label_tune_ext_adj_esteps:Adjust E-Steps
label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
label_tune_ext_measured:Length remaining:
label_tune_ext_old_estep:Old e-steps: %0.2f
label_tune_ext_new_estep:New e-steps: %0.2f
label_connection_settings:Connection
label_notifications:Notifications
label_mesh_editor:Mesh edit
label_mesh_tuner:Mesh tuner
label_case_light:Case light
label_load_started:Loading filament.\nPlease wait for the process to complete.
label_unload_started:Unloading filament.\nPlease wait for the process to complete.
label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
label_print_finished: Print\n finished
label_main_screen:Main
label_previous_print_data:Brief
label_print_time:Print Time: %02u:%02u:%02u
label_filament_length:\nFilament length: %1.2fm
label_filament_weight:\nFilament weight: %1.2fg
label_filament_cost:\nFilament cost: %1.2f
label_no_filament_stats:\nFilament data not available.
label_click_for_more:Click for summary
label_ext_templow:Hotend temperature is below minimum temperature (%d℃).
label_heat_hotend:Heat hotend to %d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Z Align
label_macros:Macros
label_mesh_valid:Mesh Validation
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_cn.ini
================================================
#### Language Code:CN
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:波特率
label_language:简体中文
label_rotate_ui:旋转界面
label_terminal_ack:在G-code终端中显示温度信息
label_persistent_info:顶部温度信息
label_file_list_mode:文件浏览列表模式
label_file_sort_by:Sort files by
label_ack_notification:ACK 弹窗类型
label_emulate_m600:模拟M600
label_serial_always_on:串口常开
label_marlin_fullscreen:全屏显示Marlin模式
label_marlin_show_title:Marlin模式显示标题
label_marlin_type:Marlin模式类型
label_move_speed:移动速度(X Y Z)
label_auto_load_leveling:自动保存/加载调平数据
label_fan_speed_percent:百分比显示风扇速度
label_xy_offset_probing:XY Offset Probing Support
label_z_steppers_alignment:Z轴多电机自动对齐
label_ps_on:自动关机
label_fil_runout:耗材检测传感器
label_pl_recovery_en:断电续打
label_pl_recovery_home:断电续打前归零
label_btt_mini_ups:启用BTT UPS
label_touch_sound:按钮声音
label_toast_sound:Toast 提示声音
label_alert_sound:弹窗和提示声音
label_heater_sound:加热提示音
label_knob_led_color:旋钮LED颜色
label_knob_led_idle:旋钮LED自动睡眠
label_lcd_brightness:LCD背光亮度
label_lcd_idle_brightness:LCD睡眠背光亮度
label_lcd_idle_delay:LCD自动睡眠时间
label_start_gcode_enabled:执行打印前起始Gcode
label_end_gcode_enabled:执行打印后结束Gcode
label_cancel_gcode_enabled:中断打印Gcode
label_steps_setting:电机每毫米脉冲数(Steps/mm)
label_maxfeedrate:最大移动速度
label_maxacceleration:最大加速度
label_acceleration:加速度
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:原点偏移量
label_fwretract:FW Retraction
label_fwrecover:FW Retraction Recover
label_retract_auto:FW自动回抽
label_hotend_offset:第2个喷头的偏移量
label_probe_offset:探针偏移量
label_lin_advance:Linear Advance
label_filament_setting:Filament Diameter
label_current_setting:TMC驱动电流设置
label_bump_sensitivity:TMC堵转检测灵敏度
label_hybrid_threshold:TMC混合阈值
label_stealth_chop:TMC StealthChop
label_print_acceleration:打印加速度
label_retract_acceleration:回抽加速度
label_travel_acceleration:空载加速度
label_retract_length:FW回抽长度
label_retract_swap_length:换料时回抽的长度
label_retract_feedrate:FW回抽速度
label_retract_z_lift:回抽时Z轴抬升的高度
label_recover_length:额外挤出的长度
label_swap_recover_length:换料时额外挤出的长度
label_recover_feedrate:FW挤出速度
label_swap_recover_feedrate:换料时挤出的速度
label_mbl_offset:MBL Offset
label_save:保存参数
label_restore:恢复
label_reset:重置
label_eeprom_save_info:是否保存打印机设置到EEPROM?
label_eeprom_restore_info:是否从EEPROM加载设置?
label_eeprom_reset_info:重置EEPROM到出厂设置?
label_settings_save:保存设置
label_settings_restore:保存设置
label_settings_reset:重置设置
label_settings_reset_info:所有的设置会被重置为默认值, 是否继续?
label_settings_reset_done:重置所有参数成功! 重启设备后生效.
label_page_up:上一页
label_page_down:下一页
label_up:抬升
label_down:降低
label_next:下一个
label_back:返回
label_inc:增加
label_dec:减少
label_load:进料
label_unload:退料
label_on:开启
label_off:关闭
label_auto:AUTO
label_smart:智能
label_slow:慢速
label_normal:常速
label_fast:快速
label_zero:清零
label_half:半速
label_full:全速
label_custom:自定义
label_clear:清除
label_default:默认
label_start:开始
label_stop:停止
label_pause:暂停
label_resume:继续
label_init:Init
label_disconnect:断开连接
label_shut_down:关闭电源
label_force_shut_down:强制关机
label_emergencystop:紧急停止
label_preheat:一键预热
label_preheat_both:全部
label_cooldown:冷却
label_confirm:确定
label_cancel:取消
label_warning:警告
label_continue:继续
label_confirmation:请确认是否执行?
label_status:状态
label_ready:准备打印
label_busy:系统繁忙,请稍候...
label_loading:加载中...
label_unconnected:未连接到打印机!
label_info:提示
label_invalid_value:没有有效的条件!
label_timeout_reached:已超时!
label_disconnect_info:现在可以用电脑控制打印机
label_shutting_down:正在关机...
label_wait_temp_shut_down:喷头温度正在降温，等待低于%d℃后自动关机
label_power_failed:是否继续打印?
label_process_running:正在运行,请稍后
label_process_completed:处理已完成!
label_process_aborted:处理已被中断!
label_tftsd:TFT SD
label_read_tftsd_error:读TFT SD卡出错!
label_tftsd_inserted:SD卡已插入!
label_tftsd_removed:SD卡已拔出!
label_u_disk:U盘
label_read_u_disk_error:读U盘出错!
label_u_disk_inserted:U盘已插入!
label_u_disk_removed:U盘已拔出!
label_onboardsd:板载SD
label_read_onboardsd_error:读板载SD卡出错!
label_filament_runout:耗材已用尽,请更换耗材!
label_disable_steppers:解锁电机
label_xy_unlock:解锁XY
label_start_print:是否开始打印:\n%s?
label_stop_print:是否停止打印?
label_is_pause:打印中无法挤出耗材, 是否暂停打印?
label_m0_pause:M0暂停
label_test:BL自检
label_deploy:探针弹出
label_stow:探针收回
label_repeat:精度测试
label_nozzle:喷头
label_bed:热床
label_chamber:机箱
label_fan:风扇
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5秒
label_10_seconds:10秒
label_30_seconds:30秒
label_60_seconds:1分钟
label_120_seconds:2分钟
label_300_seconds:5分钟
label_white:白色
label_black:黑色
label_blue:蓝色
label_red:红色
label_green:绿色
label_cyan:青色
label_yellow:黄色
label_brown:棕色
label_gray:灰色
label_orange:橙色
label_indigo:靛
label_violet:紫罗兰色
label_magenta:桃红色
label_purple:紫色
label_lime:青柠色
label_darkblue:暗蓝色
label_darkgreen:暗绿色
label_darkgray:暗灰色
label_heat:加热
label_move:移动
label_home:回原点
label_print:打印
label_extrude:挤出
label_settings:设置
label_screen_settings:屏幕设置
label_machine_settings:机器设置
label_marlin_mode_settings:MarlinMode
label_feature_settings:功能设置
label_sound:声音
label_rgb_settings:灯光颜色
label_rgb_off:熄灭灯光
label_terminal:Terminal
label_leveling:调平
label_point_1:第一点
label_point_2:第二点
label_point_3:第三点
label_point_4:第四点
label_point_5:第五点
label_bed_leveling:平台调平
label_bl_complete:平台调平完成!
label_bl_smart_fill:部分点未探测,已被自动填充, 需要手动保存!
label_bl_enable:BL:已开启
label_bl_disable:BL:已关闭
label_abl:自动调平
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh Bed Leveling
label_abl_settings:Auto Bed Leveling
label_abl_settings_bbl:Bilinear Bed Leveling
label_abl_settings_ubl:Unified Bed Leveling
label_abl_settings_ubl_save:Save to slot
label_abl_settings_ubl_load:Load from slot
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot?
label_abl_z:Z Fade
label_level_corner:L corner
label_p_offset:P Offset
label_h_offset:H Offset
label_distance:距离
label_load_unload:挤出/回抽耗材
label_load_unload_short:进/退料
label_touchscreen_adjust:触屏校准
label_more:更多
label_screen_info:关于
label_bg_color:背景颜色
label_font_color:字体颜色
label_percentage:百分比
label_percentage_speed:速度百分比
label_percentage_flow:流量百分比
label_babystep:Z-微调
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:触屏校准
label_adjust_info:请点击红点中心位置
label_adjust_ok:校准成功
label_adjust_failed:校准失败,请重试
label_unifiedmove:运动
label_unifiedheat:温度
label_touch_to_exit:触摸任意点退出当前界面
label_mainmenu:菜单
label_parameter_setting:参数设置
label_eeprom_settings:EEPROM
label_leveling_edge_distance:手动调平边沿距离
label_tuning:调整
label_pid:PID
label_pid_title:PID自动整定
label_pid_start_info:开始PID自动整定,需要几分钟来完成,是否继续?
label_pid_start_info_2:PID 正在自动整定中!
label_pid_start_info_3:不要操作触控屏直到整定完成!
label_tune_extruder:微调E-Steps
label_tune_ext_extrude_100:挤出100mm
label_tune_ext_temp:挤出机微调 | 加热
label_tune_ext_mark120mm:在耗材上标记120mm\n标记完成后点击 '%s'\n挤出完成后测量剩余长度
label_tune_ext_heatoff:关闭加热?
label_tune_ext_adj_esteps:调整E-Steps
label_tune_ext_esteps_saved:新的E-Steps已生效,需要手动保存到EEPROM\n新E-Steps: %0.2f
label_tune_ext_measured:剩余的长度:
label_tune_ext_old_estep:旧的E-Steps: %0.2f
label_tune_ext_new_estep:新的E-Steps: %0.2f
label_connection_settings:连接
label_notifications:通知
label_mesh_editor:Mesh edit
label_mesh_tuner:Mesh tuner
label_case_light:机箱灯光
label_load_started:正在挤出耗材, 请等待挤出完成.
label_unload_started:正在回抽耗材, 请等待回抽完成.
label_heaters_on:喷头仍在加热, 是否要停止加热?
label_print_finished: 打印 完成
label_main_screen:主界面
label_previous_print_data:打印统计
label_print_time:打印耗时: %02u:%02u:%02u
label_filament_length:\n使用耗材长度: %1.2fm
label_filament_weight:\n已使用耗材重量: %1.2fg
label_filament_cost:\n已使用耗材成本: %1.2f
label_no_filament_stats:\n无耗材历史数据
label_click_for_more:点击查看详情
label_ext_templow:喷头温度低于最小挤出问题 (%d℃).
label_heat_hotend:加热喷头到%d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Z Align
label_macros:Macros
label_mesh_valid:调平测试
label_wait_for_temp:请等待温度升高到目标温度
label_stop_plane_test:是否停止调平测试?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_cz.ini
================================================
#### Language Code:CZ
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:Sériový Port
label_language:Čeština
label_rotate_ui:Otočit UI
label_terminal_ack:zobrazit ACK Terminálu
label_persistent_info:Zobrazení stavových ikon
label_file_list_mode:Soubory jako seznam
label_file_sort_by:Řazení souborů
label_ack_notification:Styl oznámení ACK
label_emulate_m600:Emulace M600
label_serial_always_on:Sériový port vždy ON
label_marlin_fullscreen:Fullscreen režim Marlin
label_marlin_show_title:Zobrazit tytulek Marlin
label_marlin_type:Typ Marlin Modu
label_move_speed:Rychlost pohybu X Y Z
label_auto_load_leveling:Automaticky Leveling
label_fan_speed_percent:Rychlost ventilátoru v %
label_xy_offset_probing:Podpora XY Offset sondy
label_z_steppers_alignment:Z Motor Auto-Alignment
label_ps_on:Auto.vypnutí
label_fil_runout:Senzor filamentu
label_pl_recovery_en:Obnova po ztrátě napájení
label_pl_recovery_home:Spuštění obnovení napájení
label_btt_mini_ups:Podpora BTT UPS
label_touch_sound:Zvuk při dotyku
label_toast_sound:Zvuk oznámení
label_alert_sound:Zvuk popup okna
label_heater_sound:Zvuk při dosažení teploty
label_knob_led_color:Rotační knob LED
label_knob_led_idle:Rotační knob LED idle
label_lcd_brightness:LCD Jas
label_lcd_idle_brightness:LCD snížení jasu
label_lcd_idle_delay:LCD snížení jasu po
label_start_gcode_enabled:Spustit Gcode před tiskem
label_end_gcode_enabled:Spustit Gcode po tisku
label_cancel_gcode_enabled:Spustit Gcode po stornu
label_steps_setting:Kroků/mm
label_maxfeedrate:Max rychlost
label_maxacceleration:Max zrychlení
label_acceleration:Zrychlení
label_jerk:Jerk-trhnutí
label_junction_deviation:Junction Deviation
label_home_offset:Home Offset
label_fwretract:FW Zatažení
label_fwrecover:FW Obnovení
label_retract_auto:Auto Firmware Retract
label_hotend_offset:Offset 2.trysky
label_probe_offset:Offset sondy
label_lin_advance:Linear Advance
label_filament_setting:Průměr Filamentu
label_current_setting:TMC Proud motorů(mA)
label_bump_sensitivity:TMC Citlivost dorazu
label_hybrid_threshold:TMC Hybridní práh
label_stealth_chop:TMC Tichý režim
label_print_acceleration:Zrychlení při tisku
label_retract_acceleration:Zrychlení retrakcí
label_travel_acceleration:Zrychlení při přesunu
label_retract_length:Délka zatažení
label_retract_swap_length:Délka zatažení Swap
label_retract_feedrate:Rychlost zatažení
label_retract_z_lift:Z zvýšení při zatažení
label_recover_length:Délka obnovení
label_swap_recover_length:Délka obnovení Swap
label_recover_feedrate:Rychlost obnovení
label_swap_recover_feedrate:Rychlost obnovení Swap
label_mbl_offset:MBL Offset
label_save:Uložit
label_restore:Obnovit
label_reset:Reset
label_eeprom_save_info:Uložit nastavení tiskárny do EEPROM?
label_eeprom_restore_info:Obnovit nastavení z EEPROM?
label_eeprom_reset_info:Reset EEPROM na výchozí hodnoty?
label_settings_save:Uložení nastavení
label_settings_restore:Obnovení nastavení
label_settings_reset:Reset nastavení
label_settings_reset_info:Všechna nastavení budou obnovena na výchozí hodnoty. Pokračovat?
label_settings_reset_done:Resetování všech nastavení bylo úspěšně provedeno.\nRestartujte zařízení.
label_page_up:Další
label_page_down:Předchozí
label_up:Nahoru
label_down:Dolů
label_next:Další
label_back:Zpět
label_inc:Přidat
label_dec:Ubrat
label_load:Zavést
label_unload:Vysunout
label_on:ON
label_off:OFF
label_auto:AUTO
label_smart:SMART
label_slow:Pomalu
label_normal:Normál
label_fast:Rychle
label_zero:Vynulovat
label_half:Poloviční
label_full:Plný
label_custom:Vlastní
label_clear:Vymaž
label_default:Výchozí
label_start:Start
label_stop:Stop
label_pause:Pauza
label_resume:Obnovit
label_init:Init
label_disconnect:Odpojit
label_shut_down:Vypnout
label_force_shut_down:Vynutit
label_emergencystop:!!STOP!!
label_preheat:Zahřát
label_preheat_both:Vše
label_cooldown:Zchladit
label_confirm:Potvrdit
label_cancel:Zrušit
label_warning:Varování
label_continue:Pokračovat
label_confirmation:Jste si jistý?
label_status:Status
label_ready:Připraven
label_busy:Zpracovávám, čekejte prosím...
label_loading:Nahrávám...
label_unconnected:Tiskárna není připojena!
label_info:Info
label_invalid_value:Neplatná hodnota/y!
label_timeout_reached:Časový limit vypršel!
label_disconnect_info:Nyní můžete tiskárnu ovládat z počítače!
label_shutting_down:Vypínám se...
label_wait_temp_shut_down:Čekám na zchladnutí trysky pod %d℃
label_power_failed:Obnovit tisk?
label_process_running:Probíhá proces!
label_process_completed:Proces dokončen!
label_process_aborted:Proces přerušen!
label_tftsd:TFT SD
label_read_tftsd_error:Chyba při čtení SD karty!
label_tftsd_inserted:SD karta vložena!
label_tftsd_removed:SD karta vyjmuta!
label_u_disk:USB Disk
label_read_u_disk_error:Chyba při čtení USB disku!
label_u_disk_inserted:USB disk vložen!
label_u_disk_removed:USB disk vyjmut!
label_onboardsd:Onboard SD
label_read_onboardsd_error:Chyba při čtení Onboard SD!
label_filament_runout:Došel filament!
label_disable_steppers:Motory
label_xy_unlock:Uvolnit XY
label_start_print:Spustit tisk:\n%s?
label_stop_print:Zastavit tisk?
label_is_pause:Během tisku nelze extrudovat,\nmám pozastavit tisk?
label_m0_pause:Pauza po příkazu M0
label_test:Test
label_deploy:Vysunout
label_stow:Zasunout
label_repeat:Přesnost
label_nozzle:Tryska
label_bed:Stolek
label_chamber:Komora
label_fan:Ofuk
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0,01mm
label_01_mm:0,1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 sec.
label_10_seconds:10 sec.
label_30_seconds:30 sec.
label_60_seconds:1 min.
label_120_seconds:2 min.
label_300_seconds:5 min.
label_white:Bílá
label_black:Černá
label_blue:Modrá
label_red:Červená
label_green:Zelená
label_cyan:Tyrkys
label_yellow:Žlutá
label_brown:Hnědá
label_gray:Šedá
label_orange:Oranžová
label_indigo:Indigo
label_violet:Fialová
label_magenta:Purpurová
label_purple:Nachová
label_lime:Limetková
label_darkblue:Tmavá Modrá
label_darkgreen:Tmavá Červená
label_darkgray:Tmavá Šedá
label_heat:Teplota
label_move:Posunout
label_home:Domů
label_print:Tisknout
label_extrude:Filament
label_settings:Nastavení
label_screen_settings:Displej
label_machine_settings:Tiskárna
label_marlin_mode_settings:MarlinMode
label_feature_settings:Vlastnosti
label_sound:Zvuk
label_rgb_settings:Barva LED
label_rgb_off:LED vyp.
label_terminal:Terminál
label_leveling:Srovnat
label_point_1:Bod 1
label_point_2:Bod 2
label_point_3:Bod 3
label_point_4:Bod 4
label_point_5:Bod 5
label_bed_leveling:Bed Level
label_bl_complete:Vyrovnání kompletní
label_bl_smart_fill:Chybějící body sondy byly vyplněny inteligentně.\n\nPozn: Nezapomeň uložit!
label_bl_enable:BL: on
label_bl_disable:BL: off
label_abl:Vyrovnat
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Ruční vyrovnání
label_abl_settings:Auto vyrovnání
label_abl_settings_bbl:Bilineární vyrovnání
label_abl_settings_ubl:UBL vyrovnání
label_abl_settings_ubl_save:Uložit do slotu
label_abl_settings_ubl_load:Nahrát ze slotu
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Zapamatuj si slot restart? (Uložit EEPROM)
label_abl_z:Z-Slábnutí
label_level_corner:L Rohů
label_p_offset:P Offset
label_h_offset:H Offset
label_distance:Od okraje
label_load_unload:Vysunout/Zavést
label_load_unload_short:Vysunout
label_touchscreen_adjust:Kalibrovat
label_more:Více
label_screen_info:Info
label_bg_color:Barva pozadí
label_font_color:Barva písma
label_percentage:Procenta
label_percentage_speed:Rychlost
label_percentage_flow:Průtok
label_babystep:BabyStep
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Kalibrace dotykové obrazovky
label_adjust_info:Dotkněte se postupně všech bodů
label_adjust_ok:Kalibrace úspěšná
label_adjust_failed:Kalibrace selhala, zopakujte znovu
label_unifiedmove:Pohyb
label_unifiedheat:Teplota
label_touch_to_exit:Pro návrat se dotkněte obrazovky...
label_mainmenu:Menu
label_parameter_setting:Parametry
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Vzdálenost nivelačních bodů\nstolku od okraje
label_tuning:Kalibrace
label_pid:PID
label_pid_title:PID autokalibrace
label_pid_start_info:PID autokalibrace bude spuštěna. Bude to chvíli trvat.\nPokračovat?
label_pid_start_info_2:PID autokalibrace probíhá!
label_pid_start_info_3:NEDOTÝKEJ se displeje dokud není dokončeno (Zelená LED svítí)!
label_tune_extruder:E-Krok
label_tune_ext_extrude_100:100mm Vysunutí
label_tune_ext_temp:Kalibrace extruderu, ohřev
label_tune_ext_mark120mm:Označ 120mm na filamentu\nStlač '%s' pokud jsi připraven.\nZměř zbývající délku po vytlačení.
label_tune_ext_heatoff:Vypnout topení?
label_tune_ext_adj_esteps:Nastavení E-Kroků
label_tune_ext_esteps_saved:Nové E-kroky uloženy!\nNezapmeň uložit do EEPROM.\nNová hodnota: %0.2f
label_tune_ext_measured:Zbývající délka:
label_tune_ext_old_estep:Původní E-kroky: %0.2f
label_tune_ext_new_estep:Nové E-kroky: %0.2f
label_connection_settings:Připojení
label_notifications:Oznámení
label_mesh_editor:Mesh síť
label_mesh_tuner:Mesh nastavení
label_case_light:Osvětlení
label_load_started:Probíhá zavádění filamentu.\nNení možná další akce, dokud to nebude dokončeno.\nProsím čekejte.
label_unload_started:Probíhá vysunování filamentu.\nNení možná další akce, dokud to nebude dokončeno.\nProsím čekejte..
label_heaters_on:Topení jsou stále zapnutá.\nChcete je vypnout?
label_print_finished: Tisk\n dokončen
label_main_screen:Nabídka
label_previous_print_data:Info.tisku
label_print_time:Čas tisku: %02u:%02u:%02u
label_filament_length:\nDélka filamentu: %1.2fm
label_filament_weight:\nVáha filamentu: %1.2fg
label_filament_cost:\nCena filamentu: %1.2f
label_no_filament_stats:\nStatistika není k dispozici.
label_click_for_more:Klikni pro více.
label_ext_templow:Teplota trysky je pod minimální teplotou (%d℃).
label_heat_hotend:Zahřát trysku na %d℃?
label_desired_templow:Teplota trysky je pod požadovanou teplotou (%d℃).
label_wait_heat_up:Počkej na cílovou teplotu.
label_nozzle_stabilizing:Čekej, tryska se stabilizuje...
label_z_align:Z Align
label_macros:Makro
label_mesh_valid:Test sítě
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_de.ini
================================================
#### Language Code:DE
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:Baudrate
label_language:Deutsch
label_rotate_ui:UI drehen
label_terminal_ack:Zeige ACK im Terminal
label_persistent_info:Persistente Status Info
label_file_list_mode:Dateien als Liste
label_file_sort_by:Sortiere Dateien nach
label_ack_notification:ACK - Stil
label_emulate_m600:Emuliere M600
label_serial_always_on:Seriell Verbind. immer an
label_marlin_fullscreen:Marlin Vollbild
label_marlin_show_title:Marlin Titel anz.
label_marlin_type:Marlin Modus Typ
label_move_speed:Geschwindigkeit (XYZ)
label_auto_load_leveling:Auto Laden/Speichern Leveling
label_fan_speed_percent:Lüft. Geschw. in Prozent
label_xy_offset_probing:XY Offset Probing Untertützung
label_z_steppers_alignment:Z Stepper Auto-Justierung
label_ps_on:Auto-aus (PS_ON)
label_fil_runout:Filament Sensor
label_pl_recovery_en:Weitermachen (Stromausfall)
label_pl_recovery_home:Achsen nullen (Stromausfall)
label_btt_mini_ups:BTT UPS Unterstützung
label_touch_sound:Eingabetöne
label_toast_sound:Toasts-Töne
label_alert_sound:Popups & Alarme
label_heater_sound:Ton bei erreichter Temp.
label_knob_led_color:Drehknopf LED Farbe
label_knob_led_idle:Drehknopf LED idle Farbe
label_lcd_brightness:Helligkeit
label_lcd_idle_brightness:LCD Helligkeit (Standby)
label_lcd_idle_delay:LCD Timer Standby
label_start_gcode_enabled:Gcode vor Druck
label_end_gcode_enabled:Gcode nach Druck
label_cancel_gcode_enabled:Gcode bei Abbruch
label_steps_setting:Schritte pro mm
label_maxfeedrate:max. Feed Geschwindig.
label_maxacceleration:max. Beschleunigung
label_acceleration:Beschleunigung
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:Nullpunkt Versatz
label_fwretract:FW Rückzug
label_fwrecover:FW Rückeinschub
label_retract_auto:Auto-Rückzug (Firmware)
label_hotend_offset:Abstand 2te Düse
label_probe_offset:Sensor Versatz
label_lin_advance:Linear Advance
label_filament_setting:Filament Durchmesser
label_current_setting:Treiber Strom (mA)
label_bump_sensitivity:TMC Empfindlichkeit
label_hybrid_threshold:TMC HybridThreshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:Druck Beschl.
label_retract_acceleration:Rückzug Beschl.
label_travel_acceleration:Fahrt Beschl.
label_retract_length:Rückzug Länge
label_retract_swap_length:Rückzug Länge (Wechsel)
label_retract_feedrate:Geschwindigkeit
label_retract_z_lift:Z-Anhebung
label_recover_length:extra Länge
label_swap_recover_length:extra Länge (Wechsel)
label_recover_feedrate:Geschwindigkeit
label_swap_recover_feedrate:Geschwindigkeit (Wechsel)
label_mbl_offset:MBL Versatz
label_save:Speichern
label_restore:Laden
label_reset:zurückset.
label_eeprom_save_info:Einstellungen im EEPROM speichern?
label_eeprom_restore_info:Einstellungen aus EEPROM laden?
label_eeprom_reset_info:Standardeinstellungen des Druckers wiederherstellen?
label_settings_save:Einstellungen speichern
label_settings_restore:Einstellungen wiederherst.
label_settings_reset:Einstellungen zurücksetzen
label_settings_reset_info:Hiermit werden alle Einstellungen zurückgesetzt!\nFortfahren?
label_settings_reset_done:Einstellungen wurden erfolgreich zurückgesetzt.\nBitte neustarten.
label_page_up:Seite hoch
label_page_down:Seite runter
label_up:auf
label_down:ab
label_next:weiter
label_back:zurück
label_inc:erhöhen
label_dec:verringern
label_load:Laden
label_unload:Entladen
label_on:an
label_off:aus
label_auto:AUTO
label_smart:SMART
label_slow:langsam
label_normal:normal
label_fast:schnell
label_zero:0
label_half:halb
label_full:voll
label_custom:Extras
label_clear:löschen
label_default:Standard
label_start:Start
label_stop:Stop
label_pause:Pause
label_resume:Wiederaufnahme
label_init:Init
label_disconnect:Trennen
label_shut_down:aus
label_force_shut_down:erzwinge
label_emergencystop:NOT-AUS!
label_preheat:Vorheizen
label_preheat_both:Bett+Düse
label_cooldown:Abkühlen
label_confirm:OK
label_cancel:Abbruch
label_warning:Warnung
label_continue:Fortsetzen
label_confirmation:Sicher?
label_status:Status
label_ready:Bereit
label_busy:Bitte warten ...
label_loading:Lade ...
label_unconnected:Keine Verbindung zum Drucker!
label_info:Info
label_invalid_value:Ungültige(r) Wert(e)!
label_timeout_reached:Zeit überschritten!
label_disconnect_info:Verbindung getrennt!
label_shutting_down:Fahre herunter...
label_wait_temp_shut_down:Warte bis Düsentemperatur unter\n%d℃ fällt.
label_power_failed:Druck fortsetzen?
label_process_running:Prozess läuft bereits!
label_process_completed:Prozess fertiggestellt!
label_process_aborted:Prozess abgebrochen!
label_tftsd:TFT SD
label_read_tftsd_error:TFT SD Lesefehler!
label_tftsd_inserted:SD-Karte eingesteckt!
label_tftsd_removed:SD-Karte entfernt!
label_u_disk:USB-Stick
label_read_u_disk_error:USB-Stick Lesefehler!
label_u_disk_inserted:USB-Stick eingesteckt!
label_u_disk_removed:USB-Stick entfernt!
label_onboardsd:Onboard SD
label_read_onboardsd_error:Onboard SD Lesefehler!
label_filament_runout:Filament alle!
label_disable_steppers:alle lösen
label_xy_unlock:löse XY
label_start_print:Druck starten:\n%s?
label_stop_print:Druck abbrechen?
label_is_pause:während Druckvorgang nicht möglich!\nDruck pausieren?
label_m0_pause:Pause durch M0 Befehl
label_test:Sensortest
label_deploy:ausfahren
label_stow:einziehen
label_repeat:Präzision
label_nozzle:Düse
label_bed:Heizbett
label_chamber:Kammer
label_fan:Lüfter
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Sek.
label_10_seconds:10 Sek.
label_30_seconds:30 Sek.
label_60_seconds:1 Min.
label_120_seconds:2 Min.
label_300_seconds:5 Min.
label_white:weiß
label_black:schwarz
label_blue:blau
label_red:rot
label_green:grün
label_cyan:cyan
label_yellow:gelb
label_brown:braun
label_gray:grau
label_orange:orange
label_indigo:indigo
label_violet:violet
label_magenta:magenta
label_purple:lila
label_lime:grüngelb
label_darkblue:dunkelblau
label_darkgreen:dunkelgrün
label_darkgray:dunkelgrau
label_heat:Heizen
label_move:Verfahren
label_home:Grundst.fahrt
label_print:Drucken
label_extrude:Extruder
label_settings:Parameter
label_screen_settings:Bildschirm
label_machine_settings:Drucker
label_marlin_mode_settings:MarlinMode
label_feature_settings:Andere
label_sound:Töne
label_rgb_settings:LED Farbe
label_rgb_off:LED aus
label_terminal:Terminal
label_leveling:Leveln
label_point_1:Punkt 1
label_point_2:Punkt 2
label_point_3:Punkt 3
label_point_4:Punkt 4
label_point_5:Punkt 5
label_bed_leveling:Vermessen
label_bl_complete:Bett-Vermessung ausgeführt.
label_bl_smart_fill:Fehlende Messpunkte wurden berechent.\n\nBitte speichern!
label_bl_enable:BL: an
label_bl_disable:BL: aus
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Bett Level (Raster)
label_abl_settings:Bett Level (auto)
label_abl_settings_bbl:Bett Level (bilinear)
label_abl_settings_ubl:Bett Level (Unified)
label_abl_settings_ubl_save:im Slot speichern
label_abl_settings_ubl_load:aus Slot laden
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Mesh im EEPROM speichern? (laden nach Neustart)
label_abl_z:Z Fade
label_level_corner:L corner
label_p_offset:P Versatz
label_h_offset:H Versatz
label_distance:Abstand
label_load_unload:Laden/Entladen
label_load_unload_short:(ent)laden
label_touchscreen_adjust:TSC kalib.
label_more:Mehr
label_screen_info:Info
label_bg_color:Hintergrundfarbe
label_font_color:Schriftfarbe
label_percentage:Prozent
label_percentage_speed:Geschw.
label_percentage_flow:Fluss
label_babystep:BabyStep
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Touchscreen kalibrieren
label_adjust_info:Roten Punkt antippen
label_adjust_ok:Erfolgreich kalibriert!
label_adjust_failed:Kalibrierung fehlgeschlagen!\nErneut versuchen?
label_unifiedmove:Bewegung
label_unifiedheat:Heiz.Lüft.
label_touch_to_exit:Zum Verlassen, Bildschirm berühren.
label_mainmenu:Menü
label_parameter_setting:Parameter
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Bettecken-Abstand
label_tuning:Justage
label_pid:PID
label_pid_title:PID autotune
label_pid_start_info:PID autotune dauert einige Zeit.\nWeitermachen?
label_pid_start_info_2:PID autotune läuft!
label_pid_start_info_3:Berühren Sie den Bildschirm erst nach Fertigstellung (grüne LED)!
label_tune_extruder:Schritte
label_tune_ext_extrude_100:100mm ext.
label_tune_ext_temp:Düsentemperatur
label_tune_ext_mark120mm:Filament 120 mm über Einlass markieren,\ndann '%s' drücken & nach Extrusion\nerneut messen.
label_tune_ext_heatoff:Heizung abschalten?
label_tune_ext_adj_esteps:E-Schritte einstellen
label_tune_ext_esteps_saved:Neue E-Schritte gespeichert! Bitte auch im EEPROM speichern.\nNeuer Wert: %0.2f
label_tune_ext_measured:Restlänge:
label_tune_ext_old_estep:alte E-Schritte: %0.2f
label_tune_ext_new_estep:neue E-Schritte: %0.2f
label_connection_settings:Verbindung
label_notifications:Benachrichtigungen
label_mesh_editor:Mesh edit.
label_mesh_tuner:Mesh anp.
label_case_light:Bauraumbeleuchtung
label_load_started:Lade Filament.\nBitte warten, bis der Vorgang beendet ist.
label_unload_started:Entlade Filament.\nBitte warten, bis der Vorgang beendet ist.
label_heaters_on:Heizung noch aktiv.\nSoll das Heizen beendet werden?
label_print_finished:Druck beendet!
label_main_screen:Hauptmenü
label_previous_print_data:Info
label_print_time:Druck Zeit: %02u:%02u:%02u
label_filament_length:\nFilament Länge: %1.2fm
label_filament_weight:\nFilament Gewicht: %1.2fg
label_filament_cost:\nFilament Kosten: %1.2f
label_no_filament_stats:\nFilament Daten nicht verfügbar.
label_click_for_more:Klick für Statistik
label_ext_templow:Temperatur der Düse liegt unter dem Minimum (%d℃).
label_heat_hotend:Heize Düse auf %d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Z ausr.
label_macros:Macros
label_mesh_valid:Mesh Validation
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_du.ini
================================================
#### Language Code:DU
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:Baudsnelheid
label_language:Dutch
label_rotate_ui:Draai UI
label_terminal_ack:Laat ACK in Terminal zien
label_persistent_info:Aanhoudende statusinfo
label_file_list_mode:Files viewer List Mode
label_file_sort_by:Sort files by
label_ack_notification:ACK notification style
label_emulate_m600:Emulate M600
label_serial_always_on:Serial Always ON
label_marlin_fullscreen:Marlin mode in fullscreen
label_marlin_show_title:Marlin Mode Title Support
label_marlin_type:Marlin Mode Type
label_move_speed:Bewegingssnelheid(X Y Z)
label_auto_load_leveling:Auto Save Load Leveling
label_fan_speed_percent:Fan Speed As Percentage
label_xy_offset_probing:XY Offset Probing Support
label_z_steppers_alignment:Z Steppers Auto-Alignment
label_ps_on:Auto Power
label_fil_runout:Filament sensor
label_pl_recovery_en:Power loss recovery
label_pl_recovery_home:Power Loss Recovery Homing
label_btt_mini_ups:BTT UPS Support
label_touch_sound:Touch sounds
label_toast_sound:Toast Notifications
label_alert_sound:Popups and Alerts
label_heater_sound:Heater notification
label_knob_led_color:Draaiknop LED
label_knob_led_idle:Draaiknop LED inactief
label_lcd_brightness:Brightness
label_lcd_idle_brightness:Idle brightness
label_lcd_idle_delay:Idle timeout
label_start_gcode_enabled:Start Gcode before print
label_end_gcode_enabled:End Gcode after print
label_cancel_gcode_enabled:Cancel Gcode
label_steps_setting:Stappen permm
label_maxfeedrate:Max Feed Rate
label_maxacceleration:Max Acceleratie
label_acceleration:Acceleratie
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:Home Offset
label_fwretract:FW Retraction
label_fwrecover:FW Retraction Recover
label_retract_auto:Auto Firmware Retract
label_hotend_offset:Offset 2nd Nozzle
label_probe_offset:Probe Offset
label_lin_advance:Linear Advance
label_filament_setting:Filament Diameter
label_current_setting:Driver stroom (mA)
label_bump_sensitivity:TMC bump sensitiviteit
label_hybrid_threshold:TMC HybridThreshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:Afdruk Acceleratie
label_retract_acceleration:Retract Acceleratie
label_travel_acceleration:Travel Acceleratie
label_retract_length:Retract length
label_retract_swap_length:Retract swap length
label_retract_feedrate:Retract feedrate
label_retract_z_lift:Z lift on retraction
label_recover_length:Extra recover length
label_swap_recover_length:Extra recover swap length
label_recover_feedrate:Recover feedrate
label_swap_recover_feedrate:Swap recover feedrate
label_mbl_offset:MBL Offset
label_save:Bewaren
label_restore:Herstellen
label_reset:Reset
label_eeprom_save_info:Sla printer instellingen op naar EEPROM?
label_eeprom_restore_info:Herlaad instellingen van de EEPROM?
label_eeprom_reset_info:Reset EEPROM naar de standaard printer instellingen?
label_settings_save:Save settings
label_settings_restore:Herstel instellingen
label_settings_reset:Reset instellingen
label_settings_reset_info:Reset alle instellingen aar de standaard waardes?
label_settings_reset_done:Reset van alle instellingen is succesvol gelukt.\nHerstart alstublieft het apparaat.
label_page_up:Blz omhoog
label_page_down:Blz omlaag
label_up:Omhoog
label_down:Omlaag
label_next:Volgende
label_back:Terug
label_inc:Verhogen
label_dec:Verlagen
label_load:Laden
label_unload:Lossen
label_on:AAN
label_off:UIT
label_auto:AUTO
label_smart:SLIM
label_slow:Traag
label_normal:Normaal
label_fast:Snel
label_zero:Zero
label_half:Half
label_full:Volledig
label_custom:Aangepast
label_clear:Clear
label_default:Standaard
label_start:Start
label_stop:Stop
label_pause:Pauze
label_resume:Hervatten
label_init:Init
label_disconnect:Loskoppelen
label_shut_down:Uitschakelen
label_force_shut_down:Forceer Afsluiten
label_emergencystop:NOODSTOP
label_preheat:Voorverwarmen
label_preheat_both:Beide
label_cooldown:Afkoelen
label_confirm:Bevestig
label_cancel:Afbreken
label_warning:Waarschuwing
label_continue:Verder
label_confirmation:Weet u het zeker?
label_status:Status
label_ready:Gereed
label_busy:In verwerking ,wacht aub...
label_loading:Opladen...
label_unconnected:Geen printer gekoppeld!
label_info:Info
label_invalid_value:Geen correcte waarde/s voorzien!
label_timeout_reached:Time-out bereikt!
label_disconnect_info:De printer kan nu door de computer bestuurd worden!
label_shutting_down:Afsluiten...
label_wait_temp_shut_down:Wacht tot de temperatuur van de spuitkop lager dan %d℃ is
label_power_failed:Verder met printen?
label_process_running:Process bezig!
label_process_completed:Process voltooid!
label_process_aborted:Process geannuleerd!
label_tftsd:TFT SD
label_read_tftsd_error:TFT SD leesfout!
label_tftsd_inserted:Kaart geplaatst!
label_tftsd_removed:Kaart verwijdert!
label_u_disk:U Disk
label_read_u_disk_error:U Disk Leesfout!
label_u_disk_inserted:U Disk geplaatst!
label_u_disk_removed:U Disk verwijdert!
label_onboardsd:OnboardSD
label_read_onboardsd_error:Onboard SD-kaart leesfout!
label_filament_runout:filament op!
label_disable_steppers:Disarm All
label_xy_unlock:Ontgrendel XY
label_start_print:Start afdruk:\n%s?
label_stop_print:Stop afdruk?
label_is_pause:Kan niet extruderen tijdens printen,\nPauzeer printen?
label_m0_pause:Gepauseerd door M0 commando
label_test:Test
label_deploy:Gebruiken
label_stow:Inzetten
label_repeat:Herhaal
label_nozzle:Spuitneus
label_bed:Verwarmd bed
label_chamber:Kamer
label_fan:Ventilator
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Sec.
label_10_seconds:10 Sec.
label_30_seconds:30 Sec.
label_60_seconds:1 Min.
label_120_seconds:2 Min.
label_300_seconds:5 Min.
label_white:Wit
label_black:Zwart
label_blue:Blauw
label_red:Rood
label_green:Groen
label_cyan:Cyaan
label_yellow:Geel
label_brown:Bruin
label_gray:Grijs
label_orange:Oranje
label_indigo:Indigo
label_violet:Violet
label_magenta:Magenta
label_purple:Purple
label_lime:Lime
label_darkblue:DarkBlue
label_darkgreen:DarkGreen
label_darkgray:DarkGray
label_heat:Verwarm
label_move:Verplaats
label_home:Thuis
label_print:Print
label_extrude:Extrudeer
label_settings:Instellingen
label_screen_settings:Scherm
label_machine_settings:Machine
label_marlin_mode_settings:MarlinMode
label_feature_settings:Kenmerk
label_sound:Sound
label_rgb_settings:LED Kleur
label_rgb_off:LED Uit
label_terminal:Terminal
label_leveling:Nivelleren
label_point_1:Punt 1
label_point_2:Punt 2
label_point_3:Punt 3
label_point_4:Punt 4
label_point_5:Punt 5
label_bed_leveling:Bed Level
label_bl_complete:Bed Leveling voltooid
label_bl_smart_fill:Missende probe punten zijn slim opgevuld.\n\nNote: Vergeet niet op te slaan!
label_bl_enable:BL: aan
label_bl_disable:BL: uit
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh Bed Leveling
label_abl_settings:Auto Bed Leveling
label_abl_settings_bbl:Bilinear Bed Leveling
label_abl_settings_ubl:Unified Bed Leveling
label_abl_settings_ubl_save:Sla op naar sleuf
label_abl_settings_ubl_load:Laad van sleuf
label_abl_slot0:Sleuf 0
label_abl_slot1:Sleuf 1
label_abl_slot2:Sleuf 2
label_abl_slot3:Sleuf 3
label_abl_slot_eeprom:Onthoud sleuf voor volgende reboot? (sla op in EEPROM)
label_abl_z:Z vervagen
label_level_corner:L corner
label_p_offset:P Offset
label_h_offset:H Offset
label_distance:Afstand
label_load_unload:Load/Unload
label_load_unload_short:(Un)Load
label_touchscreen_adjust:TSC Aanpassen
label_more:Meer
label_screen_info:Info
label_bg_color:achtergrond kleur
label_font_color:tekst kleur
label_percentage:Percentage
label_percentage_speed:Snelheid
label_percentage_flow:Stromen
label_babystep:BabyStap
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Touch Screen Calibratie
label_adjust_info:Klik op de rode punt
label_adjust_ok:Calibratie Gelukt
label_adjust_failed:Calibratie Mislukt, Probeer Opnieuw aub
label_unifiedmove:Beweging
label_unifiedheat:Verwarm/Ventilator
label_touch_to_exit:Aanraken om te verlaten
label_mainmenu:Menu
label_parameter_setting:Parameter
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Bed edge distance
label_tuning:Tuning
label_pid:PID
label_pid_title:PID autotune
label_pid_start_info:PID autotune zal starten. Dit kan een paar minuten duren.\nDoorgaan?
label_pid_start_info_2:PID autotune is bezig!
label_pid_start_info_3:Raak het scherm NIET aan totdat deze klaar is (groene LED aan)!
label_tune_extruder:Tune steps
label_tune_ext_extrude_100:Ext. 100mm
label_tune_ext_temp:Extruder tuning | Heat
label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
label_tune_ext_heatoff:Turn the heater off?
label_tune_ext_adj_esteps:Adjust E-Steps
label_tune_ext_esteps_saved:New E-steps applied. Don't forget to save it in EEPROM.\nNew value: %0.2f
label_tune_ext_measured:Length remaining:
label_tune_ext_old_estep:Old e-steps: %0.2f
label_tune_ext_new_estep:New e-steps: %0.2f
label_connection_settings:Connecties
label_notifications:Notifications
label_mesh_editor:Mesh edit
label_mesh_tuner:Mesh tuner
label_case_light:Case light
label_load_started:Loading filament.\nPlease wait for the process to complete.
label_unload_started:Unloading filament.\nPlease wait for the process to complete.
label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
label_print_finished: Print\n finished
label_main_screen:Main
label_previous_print_data:Brief
label_print_time:Print Time: %02u:%02u:%02u
label_filament_length:\nFilament length: %1.2fm
label_filament_weight:\nFilament weight: %1.2fg
label_filament_cost:\nFilament cost: %1.2f
label_no_filament_stats:\nFilament data not available.
label_click_for_more:Click for summary
label_ext_templow:Hotend temperature is below minimum temperature (%d℃).
label_heat_hotend:Heat hotend to %d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Z Align
label_macros:Macros
label_mesh_valid:Mesh Validation
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_en.ini
================================================
#### Language Code:EN
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:BaudRate
label_language:English
label_rotate_ui:Rotate UI
label_terminal_ack:Show ACK in Terminal
label_persistent_info:Persistent Status Info
label_file_list_mode:Files viewer List Mode
label_file_sort_by:Sort files by
label_ack_notification:ACK notification style
label_emulate_m600:Emulate M600
label_serial_always_on:Serial Always ON
label_marlin_fullscreen:Fullscreen Mode
label_marlin_show_title:Show Title
label_marlin_type:Marlin Mode Type
label_move_speed:Move speed(X Y Z)
label_auto_load_leveling:Auto Save Load Leveling
label_fan_speed_percent:Fan Speed in Percent
label_xy_offset_probing:XY Offset Probing Support
label_z_steppers_alignment:Z Steppers Auto-Alignment
label_ps_on:Auto Power
label_fil_runout:Filament sensor
label_pl_recovery_en:Power loss recovery
label_pl_recovery_home:Home after power loss
label_btt_mini_ups:BTT UPS Support
label_touch_sound:Touch sounds
label_toast_sound:Toast Notifications
label_alert_sound:Popups and Alerts
label_heater_sound:Heater notification
label_knob_led_color:Rotary Knob LED
label_knob_led_idle:Rotary Knob LED idle
label_lcd_brightness:Brightness
label_lcd_idle_brightness:Idle brightness
label_lcd_idle_delay:Idle timeout
label_start_gcode_enabled:Start Gcode before print
label_end_gcode_enabled:End Gcode after print
label_cancel_gcode_enabled:Cancel Gcode
label_steps_setting:Steps per mm
label_maxfeedrate:Max Feed Rate
label_maxacceleration:Max Acceleration
label_acceleration:Acceleration
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:Home Offset
label_fwretract:FW Retraction
label_fwrecover:FW Retraction Recover
label_retract_auto:Auto Firmware Retract
label_hotend_offset:Offset 2nd Nozzle
label_probe_offset:Probe Offset
label_lin_advance:Linear Advance
label_filament_setting:Filament Diameter
label_current_setting:Driver Current (mA)
label_bump_sensitivity:TMC bump sensitivity
label_hybrid_threshold:TMC HybridThreshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:Print Acceleration
label_retract_acceleration:Retract Acceleration
label_travel_acceleration:Travel Acceleration
label_retract_length:Retract length
label_retract_swap_length:Retract swap length
label_retract_feedrate:Retract feedrate
label_retract_z_lift:Z lift on retraction
label_recover_length:Extra recover length
label_swap_recover_length:Extra recover swap length
label_recover_feedrate:Recover feedrate
label_swap_recover_feedrate:Swap recover feedrate
label_mbl_offset:MBL Offset
label_save:Save
label_restore:Restore
label_reset:Reset
label_eeprom_save_info:Save printer settings to EEPROM?
label_eeprom_restore_info:Reload settings from EEPROM?
label_eeprom_reset_info:Reset EEPROM to stock printer settings?
label_settings_save:Save settings
label_settings_restore:Restore settings
label_settings_reset:Reset default settings
label_settings_reset_info:Reset all settings to default values?
label_settings_reset_done:Reset all settings successful.\nPlease restart the device.
label_page_up:Page up
label_page_down:Page down
label_up:Up
label_down:Down
label_next:Next
label_back:Back
label_inc:Increase
label_dec:Decrease
label_load:Load
label_unload:Unload
label_on:ON
label_off:OFF
label_auto:AUTO
label_smart:SMART
label_slow:Slow
label_normal:Normal
label_fast:Fast
label_zero:Zero
label_half:Half
label_full:Full
label_custom:Custom
label_clear:Clear
label_default:Default
label_start:Start
label_stop:Stop
label_pause:Pause
label_resume:Resume
label_init:Init
label_disconnect:Disconnect
label_shut_down:Shut down
label_force_shut_down:Force
label_emergencystop:EM. STOP
label_preheat:Preheat
label_preheat_both:Both
label_cooldown:Cool down
label_confirm:OK
label_cancel:Cancel
label_warning:Warning
label_continue:Continue
label_confirmation:Are you sure?
label_status:Status
label_ready:Ready
label_busy:Busy processing, please wait...
label_loading:Loading...
label_unconnected:No printer attached!
label_info:Info
label_invalid_value:Invalid value(s)
label_timeout_reached:Timeout reached!
label_disconnect_info:Now you can control the printer by your computer!
label_shutting_down:Shutting down...
label_wait_temp_shut_down:Wait for the hotend temperature to be lower than %d℃
label_power_failed:Continue printing?
label_process_running:Process already running!
label_process_completed:Process completed!
label_process_aborted:Process aborted!
label_tftsd:TFT SD
label_read_tftsd_error:Read TFT SD card error!
label_tftsd_inserted:Card inserted!
label_tftsd_removed:Card removed!
label_u_disk:U Disk
label_read_u_disk_error:Read U Disk error!
label_u_disk_inserted:U Disk inserted!
label_u_disk_removed:U Disk removed!
label_onboardsd:OnboardSD
label_read_onboardsd_error:Read Onboard SD card error!
label_filament_runout:Filament runout!
label_disable_steppers:Disarm All
label_xy_unlock:Disarm XY
label_start_print:Start Printing:\n%s?
label_stop_print:Stop printing?
label_is_pause:Action not allowed while printing.\n\nPause printing?
label_m0_pause:Paused by M0 command
label_test:Test
label_deploy:Deploy
label_stow:Stow
label_repeat:Repeat
label_nozzle:Nozzle
label_bed:Hotbed
label_chamber:Chamber
label_fan:Fan
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Sec.
label_10_seconds:10 Sec.
label_30_seconds:30 Sec.
label_60_seconds:1 Min.
label_120_seconds:2 Min.
label_300_seconds:5 Min.
label_white:White
label_black:Black
label_blue:Blue
label_red:Red
label_green:Green
label_cyan:Cyan
label_yellow:Yellow
label_brown:Brown
label_gray:Gray
label_orange:Orange
label_indigo:Indigo
label_violet:Violet
label_magenta:Magenta
label_purple:Purple
label_lime:Lime
label_darkblue:DarkBlue
label_darkgreen:DarkGreen
label_darkgray:DarkGray
label_heat:Heat
label_move:Move
label_home:Home
label_print:Print
label_extrude:Extrude
label_settings:Settings
label_screen_settings:Screen
label_machine_settings:Machine
label_marlin_mode_settings:MarlinMode
label_feature_settings:Feature
label_sound:Sound
label_rgb_settings:LED Color
label_rgb_off:LED Off
label_terminal:Terminal
label_leveling:Leveling
label_point_1:Point 1
label_point_2:Point 2
label_point_3:Point 3
label_point_4:Point 4
label_point_5:Point 5
label_bed_leveling:Bed Level
label_bl_complete:Bed Leveling Complete
label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save!
label_bl_enable:BL: on
label_bl_disable:BL: off
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh Bed Leveling
label_abl_settings:Auto Bed Leveling
label_abl_settings_bbl:Bilinear Bed Leveling
label_abl_settings_ubl:Unified Bed Leveling
label_abl_settings_ubl_save:Save to slot
label_abl_settings_ubl_load:Load from slot
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot?
label_abl_z:Z Fade
label_level_corner:L corner
label_p_offset:P Offset
label_h_offset:H Offset
label_distance:Distance
label_load_unload:Load/Unload
label_load_unload_short:(Un)Load
label_touchscreen_adjust:TSC Adjust
label_more:More
label_screen_info:Info
label_bg_color:Background color
label_font_color:Font color
label_percentage:Percentage
label_percentage_speed:Speed
label_percentage_flow:Flow
label_babystep:BabyStep
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Touch Screen Calibration
label_adjust_info:Please click on the red dot
label_adjust_ok:Adjustment success
label_adjust_failed:Adjustment failed, please try again.
label_unifiedmove:Movement
label_unifiedheat:Heat/Fan
label_touch_to_exit:Touch anywhere to exit
label_mainmenu:Menu
label_parameter_setting:Parameter Settings
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Bed edge distance
label_tuning:Tuning
label_pid:PID
label_pid_title:PID autotune
label_pid_start_info:PID autotune may take some time to complete.\nContinue?
label_pid_start_info_2:PID autotune in progress!
label_pid_start_info_3:Do not touch the screen until completed (green LED ON)!
label_tune_extruder:Tune steps
label_tune_ext_extrude_100:Ext. 100mm
label_tune_ext_temp:Extruder tuning | Heat
label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
label_tune_ext_heatoff:Turn the heater off?
label_tune_ext_adj_esteps:Adjust E-Steps
label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
label_tune_ext_measured:Length remaining:
label_tune_ext_old_estep:Old e-steps: %0.2f
label_tune_ext_new_estep:New e-steps: %0.2f
label_connection_settings:Connection
label_notifications:Notifications
label_mesh_editor:Mesh edit
label_mesh_tuner:Mesh tuner
label_case_light:Case light
label_load_started:Loading filament.\nPlease wait for the process to complete.
label_unload_started:Unloading filament.\nPlease wait for the process to complete.
label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
label_print_finished:Print finished
label_main_screen:Main
label_previous_print_data:Brief
label_print_time:Print Time: %02u:%02u:%02u
label_filament_length:\nFilament length: %1.2fm
label_filament_weight:\nFilament weight: %1.2fg
label_filament_cost:\nFilament cost: %1.2f
label_no_filament_stats:\nFilament data not available.
label_click_for_more:Click for summary
label_ext_templow:Hotend temperature is below minimum temperature (%d℃).
label_heat_hotend:Heat hotend to %d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Z Align
label_macros:Macros
label_mesh_valid:Mesh Validation
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_es.ini
================================================
#### Language Code:ES
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:BaudRate
label_language:Español
label_rotate_ui:Rotar
label_terminal_ack:Show ACK in Terminal
label_persistent_info:Persistent Status Info
label_file_list_mode:Files viewer List Mode
label_file_sort_by:Sort files by
label_ack_notification:ACK notification style
label_emulate_m600:Emulate M600
label_serial_always_on:Serial Always ON
label_marlin_fullscreen:Marlin mode in fullscreen
label_marlin_show_title:Marlin Mode Title Support
label_marlin_type:Marlin Mode Type
label_move_speed:Move speed(X Y Z)
label_auto_load_leveling:Auto Save Load Leveling
label_fan_speed_percent:Fan Speed As Percentage
label_xy_offset_probing:XY Offset Probing Support
label_z_steppers_alignment:Z Steppers Auto-Alignment
label_ps_on:Apag. aut.
label_fil_runout:Filament sensor
label_pl_recovery_en:Power loss recovery
label_pl_recovery_home:Power Loss Recovery Homing
label_btt_mini_ups:BTT UPS Support
label_touch_sound:Touch sounds
label_toast_sound:Toast Notifications
label_alert_sound:Popups and Alerts
label_heater_sound:Heater notification
label_knob_led_color:Rotary Knob LED
label_knob_led_idle:Rotary Knob LED idle
label_lcd_brightness:Brightness
label_lcd_idle_brightness:Idle brightness
label_lcd_idle_delay:Idle timeout
label_start_gcode_enabled:Start Gcode before print
label_end_gcode_enabled:End Gcode after print
label_cancel_gcode_enabled:Cancel Gcode
label_steps_setting:Steps per mm
label_maxfeedrate:Max Feed Rate
label_maxacceleration:Max Acceleration
label_acceleration:Acceleration
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:Home Offset
label_fwretract:FW Retraction
label_fwrecover:FW Retraction Recover
label_retract_auto:Auto Firmware Retract
label_hotend_offset:Offset 2nd Nozzle
label_probe_offset:Sonda Compensar
label_lin_advance:Linear Advance
label_filament_setting:Filament Diameter
label_current_setting:Driver Current (mA)
label_bump_sensitivity:TMC bump sensitivity
label_hybrid_threshold:TMC HybridThreshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:Print Acceleration
label_retract_acceleration:Retract Acceleration
label_travel_acceleration:Travel Acceleration
label_retract_length:Retract length
label_retract_swap_length:Retract swap length
label_retract_feedrate:Retract feedrate
label_retract_z_lift:Z lift on retraction
label_recover_length:Extra recover length
label_swap_recover_length:Extra recover swap length
label_recover_feedrate:Recover feedrate
label_swap_recover_feedrate:Swap recover feedrate
label_mbl_offset:MBL Offset
label_save:Grabar
label_restore:Restore
label_reset:Reset
label_eeprom_save_info:Save printer settings to EEPROM?
label_eeprom_restore_info:Reload settings from EEPROM?
label_eeprom_reset_info:Reset EEPROM to stock printer settings?
label_settings_save:Save settings
label_settings_restore:Restore settings
label_settings_reset:Reset default settings
label_settings_reset_info:Reset all settings to default values?
label_settings_reset_done:Reset all settings successful.\nplease restart the device.
label_page_up:Retroceder
label_page_down:Avanzar
label_up:Up
label_down:Down
label_next:Next
label_back:Volver
label_inc:Aumentar
label_dec:Disminur
label_load:Cargar
label_unload:Descargar
label_on:ON
label_off:OFF
label_auto:AUTO
label_smart:SMART
label_slow:Despacio
label_normal:Normal
label_fast:Rápido
label_zero:Cero
label_half:Mitad
label_full:Todo
label_custom:Personalizar
label_clear:Clear
label_default:Default
label_start:Start
label_stop:Parar
label_pause:Pausar
label_resume:Continuar
label_init:Init
label_disconnect:Desconectar
label_shut_down:Apagar
label_force_shut_down:Forzar Apagado
label_emergencystop:PARADA EMERGENCIA
label_preheat:Precalentar
label_preheat_both:Ambos
label_cooldown:Enfriarse
label_confirm:Confirmar
label_cancel:Cancelar
label_warning:Advertencia
label_continue:Continuar
label_confirmation:Are you sure?
label_status:Status
label_ready:Preparado
label_busy:Procesamiento ocupado, por favor espere...
label_loading:Cargando...
label_unconnected:¡No hay comunicación con impresora!
label_info:Info
label_invalid_value:Invalid value(s)
label_timeout_reached:Timeout reached!
label_disconnect_info:¡Ahora puede controlar la impresora desde su ordenador!
label_shutting_down:Apagando...
label_wait_temp_shut_down:Espere a que la temperatura del hotend sea inferior a %d℃
label_power_failed:¿Continuar imprimiendo?
label_process_running:Process already running!
label_process_completed:Process completed!
label_process_aborted:Process aborted!
label_tftsd:SD TFT
label_read_tftsd_error:¡Error en la tarjeta SD TFT!
label_tftsd_inserted:¡Tarjeta insertada!
label_tftsd_removed:¡Tarjeta extraida!
label_u_disk:Pendrive
label_read_u_disk_error:¡Error en el Pendrive!
label_u_disk_inserted:¡Pendrive insertado!
label_u_disk_removed:¡Pendrive extraido!
label_onboardsd:SD Placa
label_read_onboardsd_error:¡Error en la tarjeta SD de la placa!
label_filament_runout:¡Filamento agotado!
label_disable_steppers:Disarm All
label_xy_unlock:Desbloquear XY
label_start_print:Start Printing:\n%s?
label_stop_print:¿Desea parar la impresión?
label_is_pause:No se puede extruir al imprimir,¿\nPausar la impresión?
label_m0_pause:Paused by M0 command
label_test:Probar
label_deploy:Desplegar
label_stow:Plegar
label_repeat:Repetir
label_nozzle:Punta
label_bed:Cama
label_chamber:Chamber
label_fan:Ventilar
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Sec.
label_10_seconds:10 Sec.
label_30_seconds:30 Sec.
label_60_seconds:1 Min.
label_120_seconds:2 Min.
label_300_seconds:5 Min.
label_white:Blanco
label_black:Negro
label_blue:Azul
label_red:Rojo
label_green:Verde
label_cyan:Cyan
label_yellow:Amarillo
label_brown:Marrón
label_gray:Gris
label_orange:Orange
label_indigo:Indigo
label_violet:Violet
label_magenta:Magenta
label_purple:Purple
label_lime:Lime
label_darkblue:DarkBlue
label_darkgreen:DarkGreen
label_darkgray:DarkGray
label_heat:Calentar
label_move:Mover
label_home:Origen
label_print:Imprimir
label_extrude:Extruir
label_settings:Configurar
label_screen_settings:Pantalla
label_machine_settings:Máquina
label_marlin_mode_settings:MarlinMode
label_feature_settings:Añadidos
label_sound:Sound
label_rgb_settings:Color LED
label_rgb_off:Apagar LED
label_terminal:Terminal
label_leveling:Nivelar
label_point_1:Punto 1
label_point_2:Punto 2
label_point_3:Punto 3
label_point_4:Punto 4
label_point_5:Punto 5
label_bed_leveling:Bed Level
label_bl_complete:Bed Leveling Complete
label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save!
label_bl_enable:BL: on
label_bl_disable:BL: off
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh Bed Leveling
label_abl_settings:Auto Bed Leveling
label_abl_settings_bbl:Bilinear Bed Leveling
label_abl_settings_ubl:Unified Bed Leveling
label_abl_settings_ubl_save:Save to slot
label_abl_settings_ubl_load:Load from slot
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot?
label_abl_z:Z Fade
label_level_corner:L corner
label_p_offset:P Offset
label_h_offset:H Offset
label_distance:Distance
label_load_unload:Load/Unload
label_load_unload_short:(Un)Load
label_touchscreen_adjust:Calibrar
label_more:Más
label_screen_info:Informar
label_bg_color:Background color
label_font_color:Font color
label_percentage:Porcentaje
label_percentage_speed:Velocidad
label_percentage_flow:Flujo
label_babystep:BabyStep
label_x_inc:+X
label_y_inc:+Y
label_z_inc:+Z
label_x_dec:-X
label_y_dec:-Y
label_z_dec:-Z
label_x:X
label_y:Y
label_z:Z
label_adjust_title:¡Calibrar la pantalla táctil
label_adjust_info:Por favor haga clic en el punto rojo
label_adjust_ok:Ajuste correcto
label_adjust_failed:Ajuste fallido, por favor intentelo de nuevo
label_unifiedmove:Movimiento
label_unifiedheat:Calor/Ventilador
label_touch_to_exit:Toca cualquier lugar para salir
label_mainmenu:Menu
label_parameter_setting:Parámetro
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Bed edge distance
label_tuning:Tuning
label_pid:PID
label_pid_title:PID autotune
label_pid_start_info:PID autotune may take some time to complete.\nContinue?
label_pid_start_info_2:PID autotune in progress!
label_pid_start_info_3:Do not touch the screen until completed (green LED ON)!
label_tune_extruder:Tune steps
label_tune_ext_extrude_100:Ext. 100mm
label_tune_ext_temp:Extruder tuning | Heat
label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
label_tune_ext_heatoff:Turn the heater off?
label_tune_ext_adj_esteps:Adjust E-Steps
label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
label_tune_ext_measured:Length remaining:
label_tune_ext_old_estep:Old e-steps: %0.2f
label_tune_ext_new_estep:New e-steps: %0.2f
label_connection_settings:Connection
label_notifications:Notifications
label_mesh_editor:Mesh edit
label_mesh_tuner:Mesh tuner
label_case_light:Case light
label_load_started:Loading filament.\nPlease wait for the process to complete.
label_unload_started:Unloading filament.\nPlease wait for the process to complete.
label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
label_print_finished: Print\n finished
label_main_screen:Main
label_previous_print_data:Brief
label_print_time:Print Time: %02u:%02u:%02u
label_filament_length:\nFilament length: %1.2fm
label_filament_weight:\nFilament weight: %1.2fg
label_filament_cost:\nFilament cost: %1.2f
label_no_filament_stats:\nFilament data not available.
label_click_for_more:Click for summary
label_ext_templow:Hotend temperature is below minimum temperature (%d℃).
label_heat_hotend:Heat hotend to %d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Z Align
label_macros:Macros
label_mesh_valid:Mesh Validation
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_fr.ini
================================================
#### Language Code:FR
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:Vitesse
label_language:Français
label_rotate_ui:Rotation
label_terminal_ack:Afficher ACK sur Terminal
label_persistent_info:Temp. toujours affichées
label_file_list_mode:Fichiers en mode liste
label_file_sort_by:Trier les fichiers par
label_ack_notification:Style de notification ACK
label_emulate_m600:Emuler M600
label_serial_always_on:Serial toujours actif
label_marlin_fullscreen:Mode Marlin plein écran
label_marlin_show_title:Titre en Mode Marlin
label_marlin_type:Type du Mode Marlin
label_move_speed:Vitesse de déplacement (X Y Z)
label_auto_load_leveling:Auto-Sauvegarde Leveling
label_fan_speed_percent:Vitesse ventilateur en %
label_xy_offset_probing:Support XY Offset
label_z_steppers_alignment:Auto-Alignement moteurs Z
label_ps_on:Extinction automatique
label_fil_runout:Capteur de filament
label_pl_recovery_en:Reprise après coupure
label_pl_recovery_home:Home avant reprise
label_btt_mini_ups:Support BTT UPS
label_touch_sound:Son des touches
label_toast_sound:Notifications
label_alert_sound:Popups et alertes
label_heater_sound:Notification de chauffe
label_knob_led_color:LED du bouton rotatif
label_knob_led_idle:Veille du bouton rotatif
label_lcd_brightness:Luminosité
label_lcd_idle_brightness:Diminution luminosité
label_lcd_idle_delay:Durée avant diminution
label_start_gcode_enabled:Gcode avant l'impression
label_end_gcode_enabled:Gcode après l'impression
label_cancel_gcode_enabled:Gcode d'annulation
label_steps_setting:Steps par mm
label_maxfeedrate:Vitesses maximales
label_maxacceleration:Accélérations maximales
label_acceleration:Accélérations
label_jerk:Jerk
label_junction_deviation:Ecart de jonction
label_home_offset:Décalage Home
label_fwretract:Rétraction firmware
label_fwrecover:Récupération firmware
label_retract_auto:Rétraction firmware auto
label_hotend_offset:Offset 2ème Buse
label_probe_offset:Décalage palpeur
label_lin_advance:Linear Advance
label_filament_setting:Diamètre filament
label_current_setting:Courant drivers (mA)
label_bump_sensitivity:Sensibilité TMC
label_hybrid_threshold:Seuil Hybride TMC
label_stealth_chop:StealthChop TMC
label_print_acceleration:Impression
label_retract_acceleration:Rétraction
label_travel_acceleration:Déplacements
label_retract_length:Longueur
label_retract_swap_length:Longueur de retrait
label_retract_feedrate:Vitesse
label_retract_z_lift:Décalage en Z
label_recover_length:Longueur
label_swap_recover_length:Longueur de retrait
label_recover_feedrate:Vitesse
label_swap_recover_feedrate:Vitesse de retrait
label_mbl_offset:Offset MBL
label_save:Sauver
label_restore:Restaurer
label_reset:Reset
label_eeprom_save_info:Enregistrer les paramètres dans l'EEPROM ?
label_eeprom_restore_info:Restaurer les paramètres de l'EEPROM ?
label_eeprom_reset_info:Réinitialiser l'EEPROM aux paramètres d'origine du firmware ?
label_settings_save:Sauvegarder paramètres
label_settings_restore:Restaurer paramètres
label_settings_reset:RàZ des paramètres
label_settings_reset_info:Réinitialiser tous les paramètres aux valeurs par défaut ?
label_settings_reset_done:Réinitialisation des paramètres réalisé avec succès.\nVeuillez redémarrer l'imprimante.
label_page_up:Précédent
label_page_down:Suivant
label_up:Monter
label_down:Descendre
label_next:Suivant
label_back:Retour
label_inc:Plus
label_dec:Moins
label_load:Charger
label_unload:Décharger
label_on:ON
label_off:OFF
label_auto:AUTO
label_smart:SMART
label_slow:Lent
label_normal:Normal
label_fast:Rapide
label_zero:Zéro
label_half:Moitié
label_full:Max
label_custom:Custom
label_clear:Effacer
label_default:Défaut
label_start:Démarrer
label_stop:Stopper
label_pause:Pause
label_resume:Reprendre
label_init:Init
label_disconnect:Libérer
label_shut_down:Eteindre
label_force_shut_down:Forcer l'extinction
label_emergencystop:Arrêt
label_preheat:Préparer
label_preheat_both:Global
label_cooldown:Refroidir
label_confirm:Confirmer
label_cancel:Annuler
label_warning:Attention
label_continue:Continuer
label_confirmation:Êtes-vous sûr ?
label_status:Statut
label_ready:Prête
label_busy:Occupée, veuillez patienter...
label_loading:Chargement...
label_unconnected:Aucune imprimante connectée !
label_info:Infos
label_invalid_value:Aucune valeur valide fournie !
label_timeout_reached:Délai d'attente dépassé !
label_disconnect_info:Vous pouvez maintenant contrôler l'imprimante depuis votre ordinateur !
label_shutting_down:Extinction en cours...
label_wait_temp_shut_down:Attendez que la température de la buse soit inférieure à %d℃
label_power_failed:Continuer l'impression ?
label_process_running:Processus en cours ! Veuillez patienter
label_process_completed:Processus terminé !
label_process_aborted:Processus annulé !
label_tftsd:SD TFT
label_read_tftsd_error:Erreur de lecture de la carte SD TFT !
label_tftsd_inserted:Carte insérée !
label_tftsd_removed:Carte retirée !
label_u_disk:Clé USB
label_read_u_disk_error:Erreur de lecture de la clé USB !
label_u_disk_inserted:Clé USB insérée !
label_u_disk_removed:Clé USB retirée !
label_onboardsd:SD interne
label_read_onboardsd_error:Erreur de lecture de la carte SD interne !
label_filament_runout:Fin de Filament !
label_disable_steppers:Moteurs
label_xy_unlock:Moteurs XY
label_start_print:Démarrer l'impression :\n%s ?
label_stop_print:Arrêter l'impression ?
label_is_pause:Extrusion impossible quand l'impression est en cours.\nMettre l'impression en pause ?
label_m0_pause:Suspendu par la commande M0
label_test:Tester
label_deploy:Déployer
label_stow:Rentrer
label_repeat:Répéter
label_nozzle:Buse
label_bed:Plateau
label_chamber:Caisson
label_fan:Ventiler
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Sec.
label_10_seconds:10 Sec.
label_30_seconds:30 Sec.
label_60_seconds:1 Min.
label_120_seconds:2 Min.
label_300_seconds:5 Min.
label_white:Blanc
label_black:Noir
label_blue:Bleu
label_red:Rouge
label_green:Vert
label_cyan:Cyan
label_yellow:Jaune
label_brown:Marron
label_gray:Gris
label_orange:Orange
label_indigo:Indigo
label_violet:Violette
label_magenta:Magenta
label_purple:Violet
label_lime:Lime
label_darkblue:Bleu Foncé
label_darkgreen:Vert Foncé
label_darkgray:Gris Foncé
label_heat:Chauffer
label_move:Déplacer
label_home:Home
label_print:Imprimer
label_extrude:Extruder
label_settings:Options
label_screen_settings:Écran
label_machine_settings:Machine
label_marlin_mode_settings:Marlin
label_feature_settings:Paramètres
label_sound:Son
label_rgb_settings:LED
label_rgb_off:LED Off
label_terminal:Terminal
label_leveling:Niveaux
label_point_1:Point 1
label_point_2:Point 2
label_point_3:Point 3
label_point_4:Point 4
label_point_5:Point 5
label_bed_leveling:ABL
label_bl_complete:Nivellement terminé
label_bl_smart_fill:Les points de sonde manquants ont été intelligemment remplis.\n\nNote : n'oubliez pas de sauvegarder !
label_bl_enable:BL On
label_bl_disable:BL Off
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Nivellement Mesh
label_abl_settings:Nivellement Auto
label_abl_settings_bbl:Nivellement Bilinéaire
label_abl_settings_ubl:Nivellement Unifié
label_abl_settings_ubl_save:Enregistrer dans l'emplacement
label_abl_settings_ubl_load:Charger depuis l'emplacement
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Se souvenir de l'emplacement au prochain redémarrage ?\n(Sauvegarde EEPROM)
label_abl_z:Z Fade
label_level_corner:L Corner
label_p_offset:Z Offset
label_h_offset:H Offset
label_distance:Distance
label_load_unload:Charger/Décharger
label_load_unload_short:Dé/Charger
label_touchscreen_adjust:Ajuster
label_more:Plus
label_screen_info:Infos
label_bg_color:Arrière-plan
label_font_color:Police
label_percentage:Avancement
label_percentage_speed:Vitesse
label_percentage_flow:Débit
label_babystep:BabyStep
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Calibration écran tactile
label_adjust_info:Veuillez toucher le point rouge
label_adjust_ok:Succès de l'ajustement
label_adjust_failed:Ajustement incorrect, veuillez réessayer
label_unifiedmove:Mouvement
label_unifiedheat:Chauffer
label_touch_to_exit:Toucher n'importe où pour quitter
label_mainmenu:Menu
label_parameter_setting:Réglages
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Distance au bord du plateau
label_tuning:Tuning
label_pid:PID
label_pid_title:Autocalibrage PID
label_pid_start_info:L'autocalibrage PID va être lancé. Cela peut prendre quelques minutes.\nContinuer ?
label_pid_start_info_2:Autocalibrage PID en cours !
label_pid_start_info_3:Ne touchez pas l'écran avant la fin (LED verte allumée) !
label_tune_extruder:Extrudeur
label_tune_ext_extrude_100:Ext. 100mm
label_tune_ext_temp:Réglage de l'extrudeur
label_tune_ext_mark120mm:Marquer 120 mm sur le filament\nAppuyer ensuite sur '%s'\nMesurer la longueur restante
label_tune_ext_heatoff:Arrêter la chauffe ?
label_tune_ext_adj_esteps:Ajustement E-Steps
label_tune_ext_esteps_saved:Nouveau E-steps enregistré !
label_tune_ext_measured:Longueur restante
label_tune_ext_old_estep:Ancien : %0.2f
label_tune_ext_new_estep:Nouveau : %0.2f
label_connection_settings:Connexion
label_notifications:Notifications
label_mesh_editor:Maillage
label_mesh_tuner:Edition du maillage
label_case_light:Caisson
label_load_started:Chargement du filament en cours.\nVeuillez attendre la fin du processus.
label_unload_started:Déchargement du filament en cours.\nVeuillez attendre la fin du processus.
label_heaters_on:Certains éléments sont toujours en chauffe.\nVoulez-vous les arrêter ?
label_print_finished: Impression\n terminée
label_main_screen:Menu
label_previous_print_data:Résumé
label_print_time:Durée : %02u:%02u:%02u
label_filament_length:\nLongueur du filament : %1.2fm
label_filament_weight:\nPoids du filament : %1.2fg
label_filament_cost:\nCoût du filament : %1.2f
label_no_filament_stats:\nAucune statistique de filament.
label_click_for_more:Afficher résumé
label_ext_templow:La température de la buse est inférieure à la température minimale (%d℃).
label_heat_hotend:Chauffer la buse à %d℃ ?
label_desired_templow:La température de la buse est inférieure à la température désirée (%d℃).
label_wait_heat_up:Attendre la chauffe.
label_nozzle_stabilizing:Patientez, stabilisation de la buse...
label_z_align:Z Align
label_macros:Macros
label_mesh_valid:Test Mesh
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_gr.ini
================================================
#### Language Code:GR
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:BaudRate
label_language:Ελληνικά
label_rotate_ui:Περιστροφή UI
label_terminal_ack:Εμφάνιση ACK στο τερματικό
label_persistent_info:Πληροφορίες μόνιμης κατάστασης
label_file_list_mode:Λειτουργία λίστας προβολής αρχείων
label_file_sort_by:Sort files by
label_ack_notification:ACK notification style
label_emulate_m600:Emulate M600
label_serial_always_on:Serial Always ON
label_marlin_fullscreen:Λειτουργία Marlin σε πλήρη οθόνη
label_marlin_show_title:Marlin Mode Title Support
label_marlin_type:Marlin Mode Type
label_move_speed:Ταχύτητα κίνησης(X Y Z)
label_auto_load_leveling:Auto Save Load Leveling
label_fan_speed_percent:Fan Speed As Percentage
label_xy_offset_probing:XY Offset Probing Support
label_z_steppers_alignment:Z Steppers Auto-Alignment
label_ps_on:Αυτόματη απενεργοποίηση
label_fil_runout:Αισθητήρας νήματος
label_pl_recovery_en:Power loss recovery
label_pl_recovery_home:Power Loss Recovery Homing
label_btt_mini_ups:BTT UPS Support
label_touch_sound:Touch sounds
label_toast_sound:Toast Notifications
label_alert_sound:Popups and Alerts
label_heater_sound:Heater notification
label_knob_led_color:LED περιστροφικού κουμπιού
label_knob_led_idle:Rotary Knob LED idle
label_lcd_brightness:Φωτεινότητα
label_lcd_idle_brightness:Φωτεινότητα LCD σκοτεινή
label_lcd_idle_delay:Xρονομετρητής αδράνειας οθόνης
label_start_gcode_enabled:Αρχικό Gcode προ εκτύπωσης
label_end_gcode_enabled:Τερματικό Gcode εφότου εκτύπωσης
label_cancel_gcode_enabled:Ματαίωση Gcode
label_steps_setting:Βήματα ανά χιλ
label_maxfeedrate:Μέγιστο ποσοστό τροφοδοσίας
label_maxacceleration:Μέγιστη επιτάχυνση
label_acceleration:Eπιτάχυνση
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:Home Offset
label_fwretract:FW Retraction
label_fwrecover:FW Retraction Recover
label_retract_auto:Auto Firmware Retract
label_hotend_offset:Offset 2nd Nozzle
label_probe_offset:Αντιστάθμιση Καθετήρας
label_lin_advance:Linear Advance
label_filament_setting:Filament Diameter
label_current_setting:Ένταση η. ρεύ. οδηγού(mA)
label_bump_sensitivity:TMC ευαισθησία χτυπήματος
label_hybrid_threshold:TMC HybridThreshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:Επιτάχυνση εκτύπωσης
label_retract_acceleration:Eπιτάχυνση ανάκλησης
label_travel_acceleration:Επιτάχυνση ταξιδιού
label_retract_length:Retract length
label_retract_swap_length:Retract swap length
label_retract_feedrate:Retract feedrate
label_retract_z_lift:Z lift on retraction
label_recover_length:Extra recover length
label_swap_recover_length:Extra recover swap length
label_recover_feedrate:Recover feedrate
label_swap_recover_feedrate:Swap recover feedrate
label_mbl_offset:MBL Offset
label_save:Αποθήκευση
label_restore:Restore
label_reset:Επαναφορά
label_eeprom_save_info:Save printer settings to EEPROM?
label_eeprom_restore_info:Reload settings from EEPROM?
label_eeprom_reset_info:Reset EEPROM to stock printer settings?
label_settings_save:Save settings
label_settings_restore:Restore settings
label_settings_reset:Reset default settings
label_settings_reset_info:Όλες οι ρυθμίσεις θα επαναφερθούν στις προεπιλεγμένες τιμές. Συνεχίσει?
label_settings_reset_done:Η επαναφορά όλων των ρυθμίσεων ολοκληρώθηκε με επιτυχία. \nΓια πλήρη εφαρμογή,\nπαρακάλω επανεκκινήστε τη συσκευή σας.
label_page_up:Σελίδα πάνω
label_page_down:Σελίδα κάτω
label_up:Up
label_down:Down
label_next:Next
label_back:Πίσω
label_inc:Αύξηση
label_dec:Μείωση
label_load:Φόρτωση
label_unload:Ξεφόρτωση
label_on:Ενεργό
label_off:Σβηστό
label_auto:AUTO
label_smart:ΈΞΥΠΝΟ
label_slow:Αργά
label_normal:Κανονικά
label_fast:Γρήγορα
label_zero:Μηδέν
label_half:Μισή ταχύτητα
label_full:Ολοταχώς
label_custom:Τροποποιημένο
label_clear:Clear
label_default:Default
label_start:Start
label_stop:Τερμάτιση
label_pause:Παύση
label_resume:Ξαναρχίσει
label_init:Init
label_disconnect:Αποσυνδέσει
label_shut_down:Απενεργοποίηση
label_force_shut_down:Αναγκαστική απενεργοποίηση
label_emergencystop:Σταμάτημα έκτακτης ανάγκης
label_preheat:Προθέρμανση
label_preheat_both:Και τα δυο
label_cooldown:Κρυώσει
label_confirm:Εντάξει
label_cancel:Ματαίωση
label_warning:Προειδοποίηση
label_continue:Συνέχεια
label_confirmation:Are you sure?
label_status:ΚΑΤΑΣΤΑΣΗ
label_ready:Έτοιμο
label_busy:Απασχολημένη επεξεργασία, παρακάλω περιμένετε ...
label_loading:Φόρτωση...
label_unconnected:Δεν υπάρχει συνδεδεμένος εκτυπωτής!
label_info:Πληροφορίες
label_invalid_value:Invalid value(s)
label_timeout_reached:Timeout reached!
label_disconnect_info:Τώρα μπορείτε να ελέγξετε τον εκτυπωτή από τον υπολογιστή σας!
label_shutting_down:Απενεργοποίηση...
label_wait_temp_shut_down:Περιμένετε για την θερμοκρασία του hotend να πέσει χαμηλότερα απο %d℃
label_power_failed:Συνέχεια εκτύπωσης;
label_process_running:Process already running!
label_process_completed:Process completed!
label_process_aborted:Process aborted!
label_tftsd:TFT SD
label_read_tftsd_error:Σφάλμα ανάγνωσης κάρτας SD οθόνης!
label_tftsd_inserted:Η κάρτα έχει εισαχθεί!
label_tftsd_removed:Η κάρτα αφαιρέθηκε!
label_u_disk:USB Δίσκος
label_read_u_disk_error:Σφάλμα ανάγνωσης USB Δίσκου!
label_u_disk_inserted:Ο USB Δίσκος έχει εισαχθεί!
label_u_disk_removed:Ο USB Δίσκος αφαιρέθηκε!
label_onboardsd:Ενσωματωμένη κάρτα SD
label_read_onboardsd_error:Σφάλμα ανάγνωσης ενσωματωμένης κάρτας SD!
label_filament_runout:τελείωσε το νημά!
label_disable_steppers:Disarm All
label_xy_unlock:Disarm XY
label_start_print:Start Printing:\n%s?
label_stop_print:Διακοπή εκτύπωσης?
label_is_pause:Δεν είναι δυνατή η εξώθηση κατα τη δυάρκεια εκτύπωσης.\nΠαύση εκτύπωσης?
label_m0_pause:Διακόπηκε λόγω M0 εντολής
label_test:Δοκιμή
label_deploy:Επέκταση
label_stow:Aπόσυρση
label_repeat:Επανάληψη
label_nozzle:Στόμιο
label_bed:Θερμή Βάση
label_chamber:Chamber
label_fan:Ανεμιστήρας
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01χιλ
label_01_mm:0.1χιλ
label_1_mm:1χιλ
label_5_mm:5χιλ
label_10_mm:10χιλ
label_100_mm:100χιλ
label_200_mm:200χιλ
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Δευτ.
label_10_seconds:10 Δευτ.
label_30_seconds:30 Δευτ.
label_60_seconds:1 Λεπτό
label_120_seconds:2 Λεπτά
label_300_seconds:5 Λεπτά
label_white:Άσπρο
label_black:Μάυρο
label_blue:Μπλέ
label_red:Κόκκινο
label_green:Πράσινο
label_cyan:Κυανό
label_yellow:Κίτρινο
label_brown:Καφέ
label_gray:Γκρί
label_orange:Πορτοκάλι
label_indigo:Ινδικό
label_violet:Βιολετί
label_magenta:Πορφύρα
label_purple:Μωβ
label_lime:Πρασινοκίτρινο
label_darkblue:Σκούρο μπλε
label_darkgreen:Σκούρο πράσινο
label_darkgray:Σκούρο γκρίζο
label_heat:Θέρμανση
label_move:Μετακίνηση
label_home:Αυτο-Κατεύθυνση
label_print:Εκτύπωση
label_extrude:Εκβολή
label_settings:Ρυθμίσεις
label_screen_settings:Οθόνη
label_machine_settings:Μηχανήματος
label_marlin_mode_settings:MarlinMode
label_feature_settings:Χαρακτηριστικών
label_sound:Sound
label_rgb_settings:Χρώμα LED
label_rgb_off:Απενεργοποίηση LED
label_terminal:Τερματικό
label_leveling:Ισοπέδωση
label_point_1:Σημείο 1
label_point_2:Σημείο 2
label_point_3:Σημείο 3
label_point_4:Σημείο 4
label_point_5:Σημείο 5
label_bed_leveling:Bed Level
label_bl_complete:Bed Leveling Complete
label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save!
label_bl_enable:BL: on
label_bl_disable:BL: off
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh Bed Leveling
label_abl_settings:Auto Bed Leveling
label_abl_settings_bbl:Bilinear Bed Leveling
label_abl_settings_ubl:Unified Bed Leveling
label_abl_settings_ubl_save:Save to slot
label_abl_settings_ubl_load:Load from slot
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot?
label_abl_z:Z Fade
label_level_corner:L corner
label_p_offset:Αντιστάθμιση P
label_h_offset:Αντιστάθμιση H
label_distance:Distance
label_load_unload:Load/Unload
label_load_unload_short:(Un)Load
label_touchscreen_adjust:Προσαρμογή TOUCH
label_more:Περισσότερα
label_screen_info:Πληροφορίες
label_bg_color:Background color
label_font_color:Font color
label_percentage:Ποσοστό
label_percentage_speed:Ταχύτητα
label_percentage_flow:Ροή
label_babystep:Μικροβήμα
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Βαθμονόμηση οθόνης αφής
label_adjust_info:Κάντε κλικ στην κόκκινη κουκκίδα
label_adjust_ok:Επιτυχία προσαρμογής
label_adjust_failed:Η προσαρμογή απέτυχε. Δοκιμάστε ξανά
label_unifiedmove:Κίνηση
label_unifiedheat:Θέρμανση/Ανεμιστήρας
label_touch_to_exit:Αγγίξτε οπουδήποτε για έξοδο
label_mainmenu:Μενού
label_parameter_setting:Ρυθμίσεις παραμέτρων
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Bed edge distance
label_tuning:Tuning
label_pid:PID
label_pid_title:PID autotune
label_pid_start_info:PID autotune may take some time to complete.\nContinue?
label_pid_start_info_2:PID autotune in progress!
label_pid_start_info_3:Do not touch the screen until completed (green LED ON)!
label_tune_extruder:Tune steps
label_tune_ext_extrude_100:Ext. 100mm
label_tune_ext_temp:Extruder tuning | Heat
label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
label_tune_ext_heatoff:Turn the heater off?
label_tune_ext_adj_esteps:Adjust E-Steps
label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
label_tune_ext_measured:Length remaining:
label_tune_ext_old_estep:Old e-steps: %0.2f
label_tune_ext_new_estep:New e-steps: %0.2f
label_connection_settings:Connection
label_notifications:Notifications
label_mesh_editor:Mesh edit
label_mesh_tuner:Mesh tuner
label_case_light:Case light
label_load_started:Loading filament.\nPlease wait for the process to complete.
label_unload_started:Unloading filament.\nPlease wait for the process to complete.
label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
label_print_finished: Print\n finished
label_main_screen:Main
label_previous_print_data:Brief
label_print_time:Print Time: %02u:%02u:%02u
label_filament_length:\nFilament length: %1.2fm
label_filament_weight:\nFilament weight: %1.2fg
label_filament_cost:\nFilament cost: %1.2f
label_no_filament_stats:\nFilament data not available.
label_click_for_more:Click for summary
label_ext_templow:Hotend temperature is below minimum temperature (%d℃).
label_heat_hotend:Heat hotend to %d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Z Align
label_macros:Macros
label_mesh_valid:Mesh Validation
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_hu.ini
================================================
#### Language Code:HU
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:Kapcsolat
label_language:Magyar
label_rotate_ui:Forgatás
label_terminal_ack:ACK Megjelenítése
label_persistent_info:Állandó állapotinfó
label_file_list_mode:Fájlnéző listamód
label_file_sort_by:Fájlok rendezése
label_ack_notification:ACK Értesítési stílus
label_emulate_m600:Emulált M600
label_serial_always_on:Soros port folytonos
label_marlin_fullscreen:Nagyképernyős Marlin mód
label_marlin_show_title:Marlin mód cím támogatás
label_marlin_type:Marlin mód típusa
label_move_speed:Mozgás seb. (X-Y-Z)
label_auto_load_leveling:Szint. auto-mentés/töltés
label_fan_speed_percent:Ventilátor sebesség %-ban
label_xy_offset_probing:X-Y Végpont tapintás tám.
label_z_steppers_alignment:Z Motorok automata igazí.
label_ps_on:Automata kikapcsolás
label_fil_runout:Szál érzékelő
label_pl_recovery_en:Energiavesztés helyreáll.
label_pl_recovery_home:Áramkimaradás helyreáll.
label_btt_mini_ups:BTT UPS Támogatás
label_touch_sound:Érintés hang
label_toast_sound:Értesítés hang
label_alert_sound:Riasztás hang
label_heater_sound:Fűtés hang
label_knob_led_color:Forgatógomb LED
label_knob_led_idle:Forgatógomb tétlen
label_lcd_brightness:Fényerősség
label_lcd_idle_brightness:LCD Halványítás
label_lcd_idle_delay:LCD Halványítási idő
label_start_gcode_enabled:Kezdő G-Kód
label_end_gcode_enabled:Befejező G-Kód
label_cancel_gcode_enabled:Leállító G-Kód
label_steps_setting:Lépés beállítás
label_maxfeedrate:Max előtolási sebesség
label_maxacceleration:Max gyorsulás
label_acceleration:Gyorsulás
label_jerk:Rántás
label_junction_deviation:Keresztezés eltérés
label_home_offset:Kezdőpont eltolás
label_fwretract:FW Visszahúzás
label_fwrecover:FW Visszanyomás
label_retract_auto:Automata visszahúz.
label_hotend_offset:Második fej eltolása
label_probe_offset:Szonda eltolás
label_lin_advance:Lineáris haladás
label_filament_setting:Filament átmérő
label_current_setting:Motoráramok beállítása
label_bump_sensitivity:TMC Ütközés érzékenység
label_hybrid_threshold:TMC Hibrid küszöbérték
label_stealth_chop:TMC StealthChop
label_print_acceleration:Nyomtatás gyorsulás
label_retract_acceleration:Visszahúzás gyorsulás
label_travel_acceleration:Utazási gyorsulás
label_retract_length:Visszahúzás hossz
label_retract_swap_length:Csere hossz vissza.
label_retract_feedrate:Visszahúzás előtol.
label_retract_z_lift:Z Emelése visszahú.
label_recover_length:Hossz javítás
label_swap_recover_length:Cserehossz javítás
label_recover_feedrate:Előtolás javítás
label_swap_recover_feedrate:Csere előtolás jav.
label_mbl_offset:MBL Eltolás
label_save:Mentés
label_restore:Visszaállítás
label_reset:Alapállítás
label_eeprom_save_info:Mented a megváltozott beállításokat az EEPROM-ba?
label_eeprom_restore_info:Betöltöd a beállításokat az EEPROM-ból?
label_eeprom_reset_info:Visszaállítod az EEPROM-ot a gyári beállításokra?
label_settings_save:Beállítások mentése
label_settings_restore:Beállítások újratöltése
label_settings_reset:Beállítások visszaáll.
label_settings_reset_info:Minden beállítás vissza fog állni alapértelmezett értékre. Folytatod?
label_settings_reset_done:A beállítások visszaállítása sikeresen megtörtént.\nAz aktiváláshoz indítsd újra az eszközt.
label_page_up:Oldal fel
label_page_down:Oldal le
label_up:Fel
label_down:Le
label_next:Tovább
label_back:Vissza
label_inc:Növel
label_dec:Csökkent
label_load:Betöltés
label_unload:Kiadás
label_on:BE
label_off:KI
label_auto:AUTO
label_smart:OKOS
label_slow:Lassú
label_normal:Normál
label_fast:Gyors
label_zero:Nulla
label_half:Fél
label_full:Teljes
label_custom:Egyedi
label_clear:Törlés
label_default:Alapért.
label_start:Kezdés
label_stop:Állj
label_pause:Szünet
label_resume:Folytatás
label_init:Kezdet
label_disconnect:Leválaszt
label_shut_down:Leállítás
label_force_shut_down:Kényszerít
label_emergencystop:Vész-STOP
label_preheat:Előfűtés
label_preheat_both:Mindkettő
label_cooldown:Hűtés
label_confirm:Oké
label_cancel:Mégse
label_warning:Figyelem!
label_continue:Folytatás
label_confirmation:Biztos vagy benne?
label_status:Státusz
label_ready:Kész
label_busy:Feldolgozás alatt, kérlek várj...
label_loading:Betöltés...
label_unconnected:Nincs nyomtató csatlakoztatva!
label_info:Infó
label_invalid_value:Nincs érvényes érték megadva
label_timeout_reached:Időkorlát elérve!
label_disconnect_info:Most a számítógépről vezérelheted a nyomtatót!
label_shutting_down:Leállítás...
label_wait_temp_shut_down:Várd meg a fej visszahűlését.%d℃
label_power_failed:Folytatod a nyomtatást?
label_process_running:Folyamat fut!
label_process_completed:Folyamat befejezve!
label_process_aborted:Folyamat megszakítva!
label_tftsd:TFT-SD
label_read_tftsd_error:TFT-SD olvasási hiba!
label_tftsd_inserted:SD-Kártya behelyezve!
label_tftsd_removed:SD-Kártya eltávolítva!
label_u_disk:USB Tár
label_read_u_disk_error:USB olvasási hiba!
label_u_disk_inserted:USB behelyezve!
label_u_disk_removed:USB eltávolítva!
label_onboardsd:Lap-SD
label_read_onboardsd_error:Alaplap-SD olvasási hiba!
label_filament_runout:Szál kifutás!
label_disable_steppers:Mot.tilt
label_xy_unlock:X-Y Felold
label_start_print:%s\nfájl kiválasztva.\nElindítod a nyomtatását?
label_stop_print:Megállítod a nyomtatást?
label_is_pause:A művelet tiltva van a nyomtatás alatt.\nSzünetelteted a nyomtatást?
label_m0_pause:Szünetelés M0 parancsal
label_test:Teszt
label_deploy:Bevetés
label_stow:Elhelyezés
label_repeat:Ismétlés
label_nozzle:Fej
label_bed:Ágy
label_chamber:Kamra
label_fan:Ventilátor
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Mp.
label_10_seconds:10 Mp.
label_30_seconds:30 Mp.
label_60_seconds:1 Perc.
label_120_seconds:2 Perc.
label_300_seconds:5 Perc.
label_white:Fehér
label_black:Fekete
label_blue:Kék
label_red:Piros
label_green:Zöld
label_cyan:Cián
label_yellow:Sárga
label_brown:Barna
label_gray:Szürke
label_orange:Narancs
label_indigo:Indigó
label_violet:Viola
label_magenta:Bíborvörös
label_purple:Lila
label_lime:Mész
label_darkblue:Sötétkék
label_darkgreen:Sötétzöld
label_darkgray:Sötétszürke
label_heat:Fűtés
label_move:Mozgás
label_home:Végállás
label_print:Nyomtatás
label_extrude:Adagolás
label_settings:Opciók
label_screen_settings:Kijelző
label_machine_settings:Gép
label_marlin_mode_settings:Marlin mód
label_feature_settings:Funkciók
label_sound:Hangok
label_rgb_settings:LED Szín
label_rgb_off:LED Ki
label_terminal:Terminál
label_leveling:Szintezés
label_point_1:1. pont
label_point_2:2. pont
label_point_3:3. pont
label_point_4:4. pont
label_point_5:5. pont
label_bed_leveling:Ágyszint
label_bl_complete:Ágy szintezése sikeres.
label_bl_smart_fill:A hiányzó szonda pontok kitöltésre kerültek.\nMegjegyzés: Mentsd el!
label_bl_enable:BL: be
label_bl_disable:BL: ki
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Kézi rács szintezés
label_abl_settings:Automata szintezés
label_abl_settings_bbl:Bilineáris szintezés
label_abl_settings_ubl:Egységes szintezés
label_abl_settings_ubl_save:Mentés szlotba
label_abl_settings_ubl_load:Betöltés szlotból
label_abl_slot0:Szlot 0
label_abl_slot1:Szlot 1
label_abl_slot2:Szlot 2
label_abl_slot3:Szlot 3
label_abl_slot_eeprom:Emlékezzen a következő újraindításnál? (EEPROM Mentése)
label_abl_z:Z Áttűnés
label_level_corner:Sarok szint
label_p_offset:P Eltolás
label_h_offset:H Eltolás
label_distance:Távolság
label_load_unload:Betöltés/Kiadás
label_load_unload_short:Be/Ki
label_touchscreen_adjust:Igazítás
label_more:Több
label_screen_info:Infó
label_bg_color:Háttérszín
label_font_color:Betűszín
label_percentage:Százalék
label_percentage_speed:Sebesség
label_percentage_flow:Hozam
label_babystep:Mikrolépés
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Érintőképernyő kalibrálása.
label_adjust_info:Kattints a piros pontra.
label_adjust_ok:Kalibrálás sikeres.
label_adjust_failed:A kalibrálás sikertelen, próbáld újra.
label_unifiedmove:Mozgás
label_unifiedheat:Fűt/Hűt
label_touch_to_exit:Érintsd meg a kilépéshez.
label_mainmenu:Főmenü
label_parameter_setting:Tényezők
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Ágyszél távolság
label_tuning:Hangolás
label_pid:PID
label_pid_title:PID Automatikus hangolás
label_pid_start_info:A PID önhangolása elindul. Percekig is eltarthat.\nFolytatod?
label_pid_start_info_2:PID Automatikus hangolása zajlik!
label_pid_start_info_3:NE ÉRINTSD meg a kijelzőt míg nincs kész! (Zöld LED jelzi!)
label_tune_extruder:Lépés hangolás
label_tune_ext_extrude_100:Kiad 100mm
label_tune_ext_temp:Adagoló hangolás | Fűt
label_tune_ext_mark120mm:A 120mm-t jelöld be a szálon\nNyomd '%s' ha kész\nMérd meg a hátralévő hosszt adagolás után.
label_tune_ext_heatoff:Kikapcsolod a fűtést?
label_tune_ext_adj_esteps:E-lépés állítás
label_tune_ext_esteps_saved:Új E-lépés mentve!\nNe felejtsd el menteni EEPROM-ba.\nÚj érték: %0.2f
label_tune_ext_measured:Hátramaradt hossz:
label_tune_ext_old_estep:Régi e-lépés: %0.2f
label_tune_ext_new_estep:Új e-lépés: %0.2f
label_connection_settings:Kapcsolat
label_notifications:Értesítések
label_mesh_editor:Háló szerkesztő
label_mesh_tuner:Háló hangoló
label_case_light:Gépház világítás
label_load_started:A szál betöltése folyamatban van,\nnem lehetséges további művelet, míg véget nem ér.\nKérlek várj!
label_unload_started:A szál kiadása folyamatban van,\nnem lehetséges további művelet, míg véget nem ér.\nKérlek várj!
label_heaters_on:Néhány fűtőelem még üzemel.\nKikapcsolod a fűtőelemeket?
label_print_finished: Nyomtatás\n elkészült!
label_main_screen:Főoldal
label_previous_print_data:Összegzés
label_print_time:Nyomtatási idő: %02u:%02u:%02u
label_filament_length:\nSzál hossza: %1.2fm
label_filament_weight:\nSzál súlya: %1.2fg
label_filament_cost:\nSzál költség: %1.2f
label_no_filament_stats:\nNincs szál statisztika.
label_click_for_more:Kattints az összegzésért.
label_ext_templow:Fejhőfok alacsonyabb, mint a minimális hőfok (%d℃).
label_heat_hotend:Fűtöd a fejet %d℃-ra?
label_desired_templow:Fejhőfok alacsonyabb, mint a\nkívánt hőfok (%d℃).
label_wait_heat_up:Várj, míg felmelegszik.
label_nozzle_stabilizing:Fejhőfok stabilizálódik...
label_z_align:Z Igazítás
label_macros:Makrók
label_mesh_valid:Háló ellenőrzése
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_it.ini
================================================
#### Language Code:IT
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:Baudrate
label_language:Italiano
label_rotate_ui:Ruota
label_terminal_ack:Mostra ACK in console
label_persistent_info:Mostra barra di stato
label_file_list_mode:File in modalità lista
label_file_sort_by:Ordina file per
label_ack_notification:Tipo di popup
label_emulate_m600:Emula M600
label_serial_always_on:Seriale sempre accesa
label_marlin_fullscreen:Marlin a schermo intero
label_marlin_show_title:Mostra titolo in Marlin
label_marlin_type:Modalità Marlin
label_move_speed:Vel. movimenti(X Y Z)
label_auto_load_leveling:Auto salva/carica liv.
label_fan_speed_percent:Ventola in percentuale
label_xy_offset_probing:Supp. probing offset XY
label_z_steppers_alignment:Auto allineamento asse Z
label_ps_on:Auto spegnimento
label_fil_runout:Sensore filamento
label_pl_recovery_en:Power loss recovery
label_pl_recovery_home:Power loss rec. homing
label_btt_mini_ups:Supporto a BTT UPS
label_touch_sound:Suono al tocco
label_toast_sound:Notifiche toast
label_alert_sound:Popup e avvisi
label_heater_sound:Notifica temperatura
label_knob_led_color:LED manopola
label_knob_led_idle:LED manopola spento
label_lcd_brightness:Luminosità
label_lcd_idle_brightness:Luminosità in idle
label_lcd_idle_delay:Timer luminosità
label_start_gcode_enabled:Inserisci start gcode
label_end_gcode_enabled:Inserisci end gcode
label_cancel_gcode_enabled:Script canc. stampa
label_steps_setting:Step per mm
label_maxfeedrate:Feedrate massimo
label_maxacceleration:Accelerazione massima
label_acceleration:Accelerazione
label_jerk:Jerk
label_junction_deviation:Junction deviation
label_home_offset:Home offset
label_fwretract:Retrazione firmware
label_fwrecover:Retrazione firmware rec.
label_retract_auto:Retrazione firmware
label_hotend_offset:Offset secondo hotend
label_probe_offset:Probe offset
label_lin_advance:Linear advance
label_filament_setting:Diametro filamento
label_current_setting:Corrente driver (mA)
label_bump_sensitivity:Sens.sensorless homing
label_hybrid_threshold:Hybrid threshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:Acc. in stampa
label_retract_acceleration:Acc. retrazione
label_travel_acceleration:Acc. spostamenti
label_retract_length:Lunghezza retrazione
label_retract_swap_length:Lunghezza retr. scambio
label_retract_feedrate:Feedrate retrazione
label_retract_z_lift:Alza Z in retrazione
label_recover_length:Lung. di recupero extra
label_swap_recover_length:Lung. di recupero scambio extra
label_recover_feedrate:Feedrate recupero
label_swap_recover_feedrate:Rec.feedrate di scambio
label_mbl_offset:MBL Offset
label_save:Salva
label_restore:Ripristina
label_reset:Reset
label_eeprom_save_info:Salvo le impostazioni nella EEPROM?
label_eeprom_restore_info:Ricarico le impostazioni dalla EEPROM?
label_eeprom_reset_info:Resetto la EEPROM ai valori di fabbrica?
label_settings_save:Salva impostazioni
label_settings_restore:Ripristina impostazioni
label_settings_reset:Resetta impostazioni
label_settings_reset_info:Resettare tutte le impostazioni ai valori di default?
label_settings_reset_done:Reset delle impostazioni avvenuto con successo.\nRiavviare la stampante prego.
label_page_up:Pagina sù
label_page_down:Pagina giù
label_up:Sù
label_down:Giù
label_next:Prossimo
label_back:Indietro
label_inc:Incrementa
label_dec:Decrementa
label_load:Carica
label_unload:Scarica
label_on:Acceso
label_off:Spento
label_auto:AUTO
label_smart:SMART
label_slow:Lento
label_normal:Normale
label_fast:Veloce
label_zero:Zero
label_half:50%
label_full:100%
label_custom:Macro
label_clear:Canc.
label_default:Predefinito
label_start:Inizia
label_stop:Stop
label_pause:Pausa
label_resume:Riprendi
label_init:Init
label_disconnect:Scollega
label_shut_down:Spegni
label_force_shut_down:Forza spegnimento
label_emergencystop:Emergenza
label_preheat:Preriscalda
label_preheat_both:Entrambi
label_cooldown:Raffredda
label_confirm:Conferma
label_cancel:Annulla
label_warning:Attenzione
label_continue:Continua
label_confirmation:Sei sicuro?
label_status:Stato
label_ready:Pronta
label_busy:Stampante occupata, attendere...
label_loading:Caricamento...
label_unconnected:Stampante non connessa
label_info:Info
label_invalid_value:Valori forniti non validi!
label_timeout_reached:Timeout raggiunto!
label_disconnect_info:Puoi controllare la stampante dal PC!
label_shutting_down:Spegnimento...
label_wait_temp_shut_down:Attendere che la temperatura dell'hotend sia inferiore a %d℃
label_power_failed:Vuoi continuare la stampa?
label_process_running:Processo in corso! Attendere il completamento
label_process_completed:Processo completato!
label_process_aborted:Processo annullato!
label_tftsd:SD schermo
label_read_tftsd_error:Errore lettura SD!
label_tftsd_inserted:SD inserita
label_tftsd_removed:SD rimossa
label_u_disk:Pen drive
label_read_u_disk_error:Errore lettura pen drive
label_u_disk_inserted:Pen drive inserita!
label_u_disk_removed:Pen drive rimossa!
label_onboardsd:SD su SKR
label_read_onboardsd_error:Errore lettura SD su SKR!
label_filament_runout:Filamento finito!
label_disable_steppers:Motori
label_xy_unlock:Sblocca XY
label_start_print:Inizio a stampare:\n%s?
label_stop_print:Vuoi fermare la stampa?
label_is_pause:Impossibile estrudere durante la stampa,\nvuoi interrompere?
label_m0_pause:Messa in pausa da comando M0
label_test:Test
label_deploy:Estrai
label_stow:Ritrai
label_repeat:Ripeti
label_nozzle:Hotend
label_bed:Piatto ris.
label_chamber:Camera
label_fan:Ventola
label_bltouch:BLtouch
label_touchmi:TouchMi
label_1_degree:1°
label_5_degree:5°
label_10_degree:10°
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 sec.
label_10_seconds:10 sec.
label_30_seconds:30 sec.
label_60_seconds:1 min.
label_120_seconds:2 min.
label_300_seconds:5 min.
label_white:Bianco
label_black:Nero
label_blue:Blu
label_red:Rosso
label_green:Verde
label_cyan:Ciano
label_yellow:Giallo
label_brown:Marrone
label_gray:Grigio
label_orange:Arancione
label_indigo:Indaco
label_violet:Viola
label_magenta:Magenta
label_purple:Viola
label_lime:Lime
label_darkblue:Blu Scuro
label_darkgreen:Verde Scuro
label_darkgray:Grigio Scuro
label_heat:Riscalda
label_move:Muovi
label_home:Home
label_print:Stampa
label_extrude:Estrudi
label_settings:Opzioni
label_screen_settings:Schermo
label_machine_settings:Stampante
label_marlin_mode_settings:MarlinMode
label_feature_settings:Configura
label_sound:Suono
label_rgb_settings:LED RGB
label_rgb_off:Spegni
label_terminal:Console
label_leveling:Calibra
label_point_1:Punto 1
label_point_2:Punto 2
label_point_3:Punto 3
label_point_4:Punto 4
label_point_5:Punto 5
label_bed_leveling:ABL
label_bl_complete:Auto livellamento completato
label_bl_smart_fill:Punti di rilevazione mancanti mesh ricostruita con funzione smart.\n\nNota: ricordati di salvare!
label_bl_enable:ABL: on
label_bl_disable:ABL: off
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh bed leveling
label_abl_settings:Auto bed leveling
label_abl_settings_bbl:ABL bilineare
label_abl_settings_ubl:ABL unificato
label_abl_settings_ubl_save:Salva nello slot
label_abl_settings_ubl_load:Carica lo slot
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Ricordo lo slot per il prossimo riavvio? (Salva in EEPROM)
label_abl_z:Z fade
label_level_corner:L corner
label_p_offset:P offset
label_h_offset:H offset
label_distance:Distanza
label_load_unload:Carica/scarica
label_load_unload_short:Scarica
label_touchscreen_adjust:Calibra
label_more:Altro
label_screen_info:Info
label_bg_color:Colore sfondo
label_font_color:Colore font
label_percentage:Percentuale
label_percentage_speed:Velocità
label_percentage_flow:Flusso
label_babystep:Babystep
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Calibrazione touch screen
label_adjust_info:Premi sui punti rossi
label_adjust_ok:Regolazione completata!
label_adjust_failed:Regolazione fallita. Riprova!
label_unifiedmove:Movimento
label_unifiedheat:Risc/vent
label_touch_to_exit:Tocca ovunque per uscire
label_mainmenu:Menù
label_parameter_setting:Parametri
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Distanza dal bordo
label_tuning:Regola
label_pid:PID
label_pid_title:Autoregolazione PID
label_pid_start_info:Partirà l'autoregolazione del PID. Può richiedere diversi minuti.\nContinuare?
label_pid_start_info_2:Autoregolazione PID in corso!
label_pid_start_info_3:NON TOCCARE lo schermo fino al completamento!
label_tune_extruder:Step/mm E
label_tune_ext_extrude_100:Estr. 100mm
label_tune_ext_temp:Regolazione estr. | Scalda
label_tune_ext_mark120mm:Fai un segno a 120mm sul filamento\nPremi '%s' quando sei pronto\nMisura la lunghezza mancante dopo l'estrusione
label_tune_ext_heatoff:Spegnere l'hotend?
label_tune_ext_adj_esteps:Regola step/mm E
label_tune_ext_esteps_saved:Nuovi step/mm di E impostati!\nNon dimenticare di salvarli nellaEEPROM\nNuovo valore: %0.2f
label_tune_ext_measured:Lunghezza mancante:
label_tune_ext_old_estep:Vecchi step/mm E: %0.2f
label_tune_ext_new_estep:Nuovi step/mm E: %0.2f
label_connection_settings:Connessioni
label_notifications:Notifiche
label_mesh_editor:Mesh
label_mesh_tuner:Correggi mesh
label_case_light:Luce
label_load_started:Carico filamento in corso...\nNon sono possibili altre azioni fino al termine. Attendere prego.
label_unload_started:Scarico filamento in corso...\nNon sono possibili altre azioni fino al termine. Attendere prego.
label_heaters_on:Alcuni riscaldatori sono ancora accesi\nVuoi spegnerli?
label_print_finished: Stampa\n ultimata.
label_main_screen:Principale
label_previous_print_data:Ultimo lav.
label_print_time:Durata stampa: %02u:%02u:%02u
label_filament_length:\nLunghezza filamento: %1.2fm
label_filament_weight:\nPeso filamento: %1.2fg
label_filament_cost:\nCosto filamento: %1.2f
label_no_filament_stats:\nNessuna statistica del filamento.
label_click_for_more:Clicca per riepilogo
label_ext_templow:La temperatura dell'hotend è al di sotto della temperatura minima (%d℃).
label_heat_hotend:Scaldo l'hotend a %d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Allinea Z
label_macros:Macro
label_mesh_valid:Validazione mesh
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_jp.ini
================================================
#### Language Code:JP
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:ポートレート
label_language:日本語
label_rotate_ui:回転UI
label_terminal_ack:端末でACKを表示する
label_persistent_info:永続的なステータス情報
label_file_list_mode:ファイルビューアリストモード
label_file_sort_by:Sort files by
label_ack_notification:ACK notification style
label_emulate_m600:Emulate M600
label_serial_always_on:Serial Always ON
label_marlin_fullscreen:フルスクリーンでマーリンモード
label_marlin_show_title:Marlin Mode Title Support
label_marlin_type:Marlin Mode Type
label_move_speed:移動速度(X Y Z)
label_auto_load_leveling:Auto Save Load Leveling
label_fan_speed_percent:Fan Speed As Percentage
label_xy_offset_probing:XY Offset Probing Support
label_z_steppers_alignment:Z Steppers Auto-Alignment
label_ps_on:オートパワー
label_fil_runout:フィラメントセンサ
label_pl_recovery_en:Power loss recovery
label_pl_recovery_home:Power Loss Recovery Homing
label_btt_mini_ups:BTT UPS Support
label_touch_sound:Touch sounds
label_toast_sound:Toast Notifications
label_alert_sound:Popups and Alerts
label_heater_sound:Heater notification
label_knob_led_color:回転ノブLED
label_knob_led_idle:Rotary Knob LED idle
label_lcd_brightness:LCD明るさ
label_lcd_idle_brightness:LCDの輝度が薄暗い
label_lcd_idle_delay:LCD調光アイドルタイマー
label_start_gcode_enabled:印刷前にGコードを開始する
label_end_gcode_enabled:印刷後にGコードを終了する
label_cancel_gcode_enabled:Gコードをキャンセルする
label_steps_setting:MMあたりのステップ
label_maxfeedrate:マックスフィード率
label_maxacceleration:最大加速度
label_acceleration:加速度
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:Home Offset
label_fwretract:FW Retraction
label_fwrecover:FW Retraction Recover
label_retract_auto:Auto Firmware Retract
label_hotend_offset:Offset 2nd Nozzle
label_probe_offset:プローブオフセット
label_lin_advance:Linear Advance
label_filament_setting:Filament Diameter
label_current_setting:ドライバー電流 (mA)
label_bump_sensitivity:TMC バンプ感度
label_hybrid_threshold:TMC HybridThreshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:印刷加速度
label_retract_acceleration:引き戻し加速度
label_travel_acceleration:空振り加速度
label_retract_length:引き戻し長さ
label_retract_swap_length:交換時の引き戻し長さ
label_retract_feedrate:引き戻し速度
label_retract_z_lift:引き戻し時のz軸上げの高さ
label_recover_length:余分な押し出し長さ
label_swap_recover_length:交換時の余分な押し出し長さ
label_recover_feedrate:押出速度
label_swap_recover_feedrate:交換時の押出速度
label_mbl_offset:MBL Offset
label_save:保存
label_restore:Restore
label_reset:リセット
label_eeprom_save_info:プリンタの設定をEEPROMに保存しますか?
label_eeprom_restore_info:EEPROMから設定を再読み込み?
label_eeprom_reset_info:Reset EEPROM to stock printer settings?
label_settings_save:Save settings
label_settings_restore:設定を復元する
label_settings_reset:設定をリセットする
label_settings_reset_info:すべての設定をデフォルト値にリセットしますか?
label_settings_reset_done:すべての設定が正常にリセットされました。デバイスを再起動してください。
label_page_up:前ページ
label_page_down:次ページ
label_up:Up
label_down:Down
label_next:Next
label_back:戻る
label_inc:増え
label_dec:減る
label_load:増え
label_unload:減る
label_on:ON
label_off:OFF
label_auto:AUTO
label_smart:スマート
label_slow:ゆっくり
label_normal:正常速度
label_fast:早め
label_zero:ゼロ
label_half:50%速さ
label_full:全速
label_custom:カスタム
label_clear:Clear
label_default:Default
label_start:Start
label_stop:停止
label_pause:一時停止
label_resume:続ける
label_init:Init
label_disconnect:データ接続
label_shut_down:シャットダウン
label_force_shut_down:フォース
label_emergencystop:EM.停止
label_preheat:予熱する
label_preheat_both:両方
label_cooldown:クールダウン
label_confirm:OK
label_cancel:キャンセル
label_warning:注意
label_continue:継続
label_confirmation:Are you sure?
label_status:状態
label_ready:準備中
label_busy:ビジー状態、しばらくお待ちください...
label_loading:ロッド中...
label_unconnected:プリンターに連続していない!
label_info:情報
label_invalid_value:Invalid value(s)
label_timeout_reached:Timeout reached!
label_disconnect_info:SDカード PC両用
label_shutting_down:シャットダウン...
label_wait_temp_shut_down:ホットエンドの温度が%d℃未満になるまで待ちます。
label_power_failed:プリントを継続しますか?
label_process_running:Process already running!
label_process_completed:Process completed!
label_process_aborted:Process aborted!
label_tftsd:TFT SD
label_read_tftsd_error:TFT SDカードの読み取りがエラー発生しました!
label_tftsd_inserted:SDカード入りました!
label_tftsd_removed:SDカード出しました!
label_u_disk:USBメモリー
label_read_u_disk_error:USBメモリー読み込みエラー!
label_u_disk_inserted:U Diskカード入りました!
label_u_disk_removed:U Diskカード出しました!
label_onboardsd:内部 mSDカード
label_read_onboardsd_error:内部 mSDカードの読み取りがエラー発生しました!
label_filament_runout:フィラメントランアウト!
label_disable_steppers:Disarm All
label_xy_unlock:Disarm XY
label_start_print:印刷を開始する:\n%s?
label_stop_print:プリントを中止しますか?
label_is_pause:印刷時に押し出すことができない。印刷を中止しますか？
label_m0_pause:MOコマンドで一時停止
label_test:テスト
label_deploy:展開
label_stow:収納
label_repeat:繰り返す
label_nozzle:ノズル
label_bed:ベッド
label_chamber:Chamber
label_fan:ファン
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Sec.
label_10_seconds:10 Sec.
label_30_seconds:30 Sec.
label_60_seconds:1 Min.
label_120_seconds:2 Min.
label_300_seconds:5 Min.
label_white:白色
label_black:黒色
label_blue:青色
label_red:赤色
label_green:緑色
label_cyan:シアン
label_yellow:黄色
label_brown:茶色
label_gray:灰色
label_orange:オレンジ
label_indigo:インディゴ
label_violet:バイオレット
label_magenta:赤紫色
label_purple:紫
label_lime:ライム
label_darkblue:濃紺
label_darkgreen:ダークグリーン
label_darkgray:暗灰色
label_heat:あたため
label_move:移動
label_home:ゼロにする
label_print:プリント
label_extrude:押出
label_settings:設定
label_screen_settings:画面
label_machine_settings:マシン
label_marlin_mode_settings:MarlinMode
label_feature_settings:機能
label_sound:Sound
label_rgb_settings:LED カラー
label_rgb_off:LED オフ
label_terminal:端末
label_leveling:レベリング
label_point_1:ポイント1
label_point_2:ポイント2
label_point_3:ポイント3
label_point_4:ポイント4
label_point_5:ポイント5
label_bed_leveling:Bed Level
label_bl_complete:Bed Leveling Complete
label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save!
label_bl_enable:BL: on
label_bl_disable:BL: off
label_abl:自動調整
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh Bed Leveling
label_abl_settings:Auto Bed Leveling
label_abl_settings_bbl:Bilinear Bed Leveling
label_abl_settings_ubl:Unified Bed Leveling
label_abl_settings_ubl_save:Save to slot
label_abl_settings_ubl_load:Load from slot
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot?
label_abl_z:Z Fade
label_level_corner:L corner
label_p_offset:P Offset
label_h_offset:H Offset
label_distance:Distance
label_load_unload:Load/Unload
label_load_unload_short:(Un)Load
label_touchscreen_adjust:校正する
label_more:詳細
label_screen_info:ついて
label_bg_color:背景色
label_font_color:フォントの色
label_percentage:パーセント
label_percentage_speed:スビード
label_percentage_flow:押出
label_babystep:ベビーステップ
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:タッチスクリーン較正
label_adjust_info:赤星をタッチ
label_adjust_ok:校正が成功しました
label_adjust_failed:校正が失敗しました、も一度お試して下さい
label_unifiedmove:移動
label_unifiedheat:ヒート&ファン
label_touch_to_exit:クリックして終了します
label_mainmenu:メニュー
label_parameter_setting:パラメータ
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Bed edge distance
label_tuning:Tuning
label_pid:PID
label_pid_title:PID autotune
label_pid_start_info:PID autotune may take some time to complete.\nContinue?
label_pid_start_info_2:PID autotune in progress!
label_pid_start_info_3:Do not touch the screen until completed (green LED ON)!
label_tune_extruder:Tune steps
label_tune_ext_extrude_100:Ext. 100mm
label_tune_ext_temp:Extruder tuning | Heat
label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
label_tune_ext_heatoff:Turn the heater off?
label_tune_ext_adj_esteps:Adjust E-Steps
label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
label_tune_ext_measured:Length remaining:
label_tune_ext_old_estep:Old e-steps: %0.2f
label_tune_ext_new_estep:New e-steps: %0.2f
label_connection_settings:Connection
label_notifications:Notifications
label_mesh_editor:Mesh edit
label_mesh_tuner:Mesh tuner
label_case_light:Case light
label_load_started:Loading filament.\nPlease wait for the process to complete.
label_unload_started:Unloading filament.\nPlease wait for the process to complete.
label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
label_print_finished: Print\n finished
label_main_screen:Main
label_previous_print_data:Brief
label_print_time:Print Time: %02u:%02u:%02u
label_filament_length:\nFilament length: %1.2fm
label_filament_weight:\nFilament weight: %1.2fg
label_filament_cost:\nFilament cost: %1.2f
label_no_filament_stats:\nFilament data not available.
label_click_for_more:Click for summary
label_ext_templow:Hotend temperature is below minimum temperature (%d℃).
label_heat_hotend:Heat hotend to %d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Z Align
label_macros:Macros
label_mesh_valid:Mesh Validation
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_pl.ini
================================================
#### Language Code:PL
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:BaudRate
label_language:Polski
label_rotate_ui:Obrót
label_terminal_ack:Show ACK in Terminal
label_persistent_info:Persistent Status Info
label_file_list_mode:Files viewer List Mode
label_file_sort_by:Sort files by
label_ack_notification:ACK notification style
label_emulate_m600:Emulate M600
label_serial_always_on:Serial Always ON
label_marlin_fullscreen:Marlin mode in fullscreen
label_marlin_show_title:Marlin Mode Title Support
label_marlin_type:Marlin Mode Type
label_move_speed:Move speed(X Y Z)
label_auto_load_leveling:Auto Save Load Leveling
label_fan_speed_percent:Fan Speed As Percentage
label_xy_offset_probing:XY Offset Probing Support
label_z_steppers_alignment:Z Steppers Auto-Alignment
label_ps_on:Auto Power
label_fil_runout:Filament sensor
label_pl_recovery_en:Power loss recovery
label_pl_recovery_home:Power Loss Recovery Homing
label_btt_mini_ups:BTT UPS Support
label_touch_sound:Touch sounds
label_toast_sound:Toast Notifications
label_alert_sound:Popups and Alerts
label_heater_sound:Heater notification
label_knob_led_color:Rotary Knob LED
label_knob_led_idle:Rotary Knob LED idle
label_lcd_brightness:Brightness
label_lcd_idle_brightness:Idle brightness
label_lcd_idle_delay:Idle timeout
label_start_gcode_enabled:Start Gcode before print
label_end_gcode_enabled:End Gcode after print
label_cancel_gcode_enabled:Cancel Gcode
label_steps_setting:Steps per mm
label_maxfeedrate:Max Feed Rate
label_maxacceleration:Max Acceleration
label_acceleration:Acceleration
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:Home Offset
label_fwretract:FW Retraction
label_fwrecover:FW Retraction Recover
label_retract_auto:Auto Firmware Retract
label_hotend_offset:Offset 2nd Nozzle
label_probe_offset:Przesunięcie
label_lin_advance:Linear Advance
label_filament_setting:Filament Diameter
label_current_setting:Driver Current (mA)
label_bump_sensitivity:TMC bump sensitivity
label_hybrid_threshold:TMC HybridThreshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:Print Acceleration
label_retract_acceleration:Retract Acceleration
label_travel_acceleration:Travel Acceleration
label_retract_length:Retract length
label_retract_swap_length:Retract swap length
label_retract_feedrate:Retract feedrate
label_retract_z_lift:Z lift on retraction
label_recover_length:Extra recover length
label_swap_recover_length:Extra recover swap length
label_recover_feedrate:Recover feedrate
label_swap_recover_feedrate:Swap recover feedrate
label_mbl_offset:MBL Offset
label_save:Zapisz
label_restore:Restore
label_reset:Reset
label_eeprom_save_info:Save printer settings to EEPROM?
label_eeprom_restore_info:Reload settings from EEPROM?
label_eeprom_reset_info:Reset EEPROM to stock printer settings?
label_settings_save:Save settings
label_settings_restore:Restore settings
label_settings_reset:Reset default settings
label_settings_reset_info:Reset all settings to default values?
label_settings_reset_done:Reset all settings successful.\nPlease restart the device.
label_page_up:Dalej
label_page_down:Wstecz
label_up:Up
label_down:Down
label_next:Next
label_back:Powrót
label_inc:Więcej
label_dec:Mniej
label_load:Load
label_unload:Unload
label_on:ON
label_off:OFF
label_auto:AUTO
label_smart:SMART
label_slow:Wolno
label_normal:Normalnie
label_fast:Szybko
label_zero:Zero
label_half:Połowa
label_full:Max
label_custom:Własne
label_clear:Clear
label_default:Default
label_start:Start
label_stop:Stop
label_pause:Wstrzymaj
label_resume:Wznów
label_init:Init
label_disconnect:Odłącz
label_shut_down:Wyłącz
label_force_shut_down:Wymuś
label_emergencystop:ZATRZYMAJ
label_preheat:Rozgrzew.
label_preheat_both:Wszystko
label_cooldown:Chłodzenie
label_confirm:Potwierdź
label_cancel:Anuluj
label_warning:Uwaga
label_continue:Kontynuuj
label_confirmation:Are you sure?
label_status:Status
label_ready:Gotowy
label_busy:Trwa przetwarzanie, proszę czekać...
label_loading:Loading...
label_unconnected:Drukarka nie podłączona!
label_info:Info
label_invalid_value:Invalid value(s)
label_timeout_reached:Timeout reached!
label_disconnect_info:Teraz możesz kontrolować drukarkę z komputera!
label_shutting_down:Wyłączanie...
label_wait_temp_shut_down:Czekam na schłodzenie do %d℃
label_power_failed:Kontynuować drukowanie?
label_process_running:Process already running!
label_process_completed:Process completed!
label_process_aborted:Process aborted!
label_tftsd:SD TFT
label_read_tftsd_error:Błąd odczytu karty SD wyświetlacza!
label_tftsd_inserted:Karta włożona!
label_tftsd_removed:Karta wyjęta!
label_u_disk:U Disk
label_read_u_disk_error:Błąd odczytu U Disk!
label_u_disk_inserted:U Disk włożony!
label_u_disk_removed:U Disk wyjęty!
label_onboardsd:SD płyta
label_read_onboardsd_error:Błąd odczytu karty SD na płycie!
label_filament_runout:brak filamentu!
label_disable_steppers:Disarm All
label_xy_unlock:Odblokuj XY
label_start_print:Start Printing:\n%s?
label_stop_print:Zatrzymać drukowanie?
label_is_pause:Operacja niedostępna w trakcie drukowania,\nwstrzymać drukowanie?
label_m0_pause:Paused by M0 command
label_test:Test
label_deploy:Wysuń
label_stow:Schowaj
label_repeat:Powtórz
label_nozzle:Głowica
label_bed:Stół
label_chamber:Chamber
label_fan:Wentylator
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Sec.
label_10_seconds:10 Sec.
label_30_seconds:30 Sec.
label_60_seconds:1 Min.
label_120_seconds:2 Min.
label_300_seconds:5 Min.
label_white:Biały
label_black:Czarny
label_blue:Niebieski
label_red:Czerwony
label_green:Zielony
label_cyan:Turkusowy
label_yellow:Żółty
label_brown:Brązowy
label_gray:Szary
label_orange:Orange
label_indigo:Indigo
label_violet:Violet
label_magenta:Magenta
label_purple:Purple
label_lime:Lime
label_darkblue:DarkBlue
label_darkgreen:DarkGreen
label_darkgray:DarkGray
label_heat:Temp.
label_move:Ruch
label_home:Powrót
label_print:Druk
label_extrude:Extrude
label_settings:Ustawienia
label_screen_settings:Ekran
label_machine_settings:Drukarka
label_marlin_mode_settings:MarlinMode
label_feature_settings:Opcje
label_sound:Sound
label_rgb_settings:Kolor LED
label_rgb_off:Wyłącz LED
label_terminal:Terminal
label_leveling:Poziomowanie
label_point_1:Punkt 1
label_point_2:Punkt 2
label_point_3:Punkt 3
label_point_4:Punkt 4
label_point_5:Punkt 5
label_bed_leveling:Bed Level
label_bl_complete:Bed Leveling Complete
label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save!
label_bl_enable:BL: on
label_bl_disable:BL: off
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh Bed Leveling
label_abl_settings:Auto Bed Leveling
label_abl_settings_bbl:Bilinear Bed Leveling
label_abl_settings_ubl:Unified Bed Leveling
label_abl_settings_ubl_save:Save to slot
label_abl_settings_ubl_load:Load from slot
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot?
label_abl_z:Z Fade
label_level_corner:L corner
label_p_offset:P Offset
label_h_offset:H Offset
label_distance:Distance
label_load_unload:Load/Unload
label_load_unload_short:(Un)Load
label_touchscreen_adjust:Kalibracja
label_more:Więcej
label_screen_info:Info
label_bg_color:Background color
label_font_color:Font color
label_percentage:Procent
label_percentage_speed:Prędkość
label_percentage_flow:Flow
label_babystep:BabyStep
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Kalibracja ekranu dotykowego
label_adjust_info:Dotykaj czerwoną kropkę
label_adjust_ok:Kalibracja poprawna
label_adjust_failed:Kalibracja niepoprawna, spróbuj ponownie
label_unifiedmove:Ruch
label_unifiedheat:Temperatura
label_touch_to_exit:Dotkij aby wyjść
label_mainmenu:Menu
label_parameter_setting:Parametr
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Bed edge distance
label_tuning:Tuning
label_pid:PID
label_pid_title:PID autotune
label_pid_start_info:PID autotune may take some time to complete.\nContinue?
label_pid_start_info_2:PID autotune in progress!
label_pid_start_info_3:Do not touch the screen until completed (green LED ON)!
label_tune_extruder:Tune steps
label_tune_ext_extrude_100:Ext. 100mm
label_tune_ext_temp:Extruder tuning | Heat
label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
label_tune_ext_heatoff:Turn the heater off?
label_tune_ext_adj_esteps:Adjust E-Steps
label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
label_tune_ext_measured:Length remaining:
label_tune_ext_old_estep:Old e-steps: %0.2f
label_tune_ext_new_estep:New e-steps: %0.2f
label_connection_settings:Connection
label_notifications:Notifications
label_mesh_editor:Mesh edit
label_mesh_tuner:Mesh tuner
label_case_light:Case light
label_load_started:Loading filament.\nPlease wait for the process to complete.
label_unload_started:Unloading filament.\nPlease wait for the process to complete.
label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
label_print_finished: Print\n finished
label_main_screen:Main
label_previous_print_data:Brief
label_print_time:Print Time: %02u:%02u:%02u
label_filament_length:\nFilament length: %1.2fm
label_filament_weight:\nFilament weight: %1.2fg
label_filament_cost:\nFilament cost: %1.2f
label_no_filament_stats:\nFilament data not available.
label_click_for_more:Click for summary
label_ext_templow:Hotend temperature is below minimum temperature (%d℃).
label_heat_hotend:Heat hotend to %d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Z Align
label_macros:Macros
label_mesh_valid:Mesh Validation
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_pt.ini
================================================
#### Language Code:PT
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:BaudRate
label_language:Portugues
label_rotate_ui:Rodar
label_terminal_ack:Show ACK in Terminal
label_persistent_info:Persistent Status Info
label_file_list_mode:Files viewer List Mode
label_file_sort_by:Sort files by
label_ack_notification:ACK notification style
label_emulate_m600:Emulate M600
label_serial_always_on:Serial Always ON
label_marlin_fullscreen:Marlin mode in fullscreen
label_marlin_show_title:Marlin Mode Title Support
label_marlin_type:Marlin Mode Type
label_move_speed:Move speed(X Y Z)
label_auto_load_leveling:Auto Save Load Leveling
label_fan_speed_percent:Fan Speed As Percentage
label_xy_offset_probing:XY Offset Probing Support
label_z_steppers_alignment:Z Steppers Auto-Alignment
label_ps_on:Auto Power
label_fil_runout:Filament sensor
label_pl_recovery_en:Power loss recovery
label_pl_recovery_home:Power Loss Recovery Homing
label_btt_mini_ups:BTT UPS Support
label_touch_sound:Touch sounds
label_toast_sound:Toast Notifications
label_alert_sound:Popups and Alerts
label_heater_sound:Heater notification
label_knob_led_color:Rotary Knob LED
label_knob_led_idle:Rotary Knob LED idle
label_lcd_brightness:Brightness
label_lcd_idle_brightness:Idle brightness
label_lcd_idle_delay:Idle timeout
label_start_gcode_enabled:Start Gcode before print
label_end_gcode_enabled:End Gcode after print
label_cancel_gcode_enabled:Cancel Gcode
label_steps_setting:Steps per mm
label_maxfeedrate:Max Feed Rate
label_maxacceleration:Max Acceleration
label_acceleration:Acceleration
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:Home Offset
label_fwretract:FW Retraction
label_fwrecover:FW Retraction Recover
label_retract_auto:Auto Firmware Retract
label_hotend_offset:Offset 2nd Nozzle
label_probe_offset:Probe Offset
label_lin_advance:Linear Advance
label_filament_setting:Filament Diameter
label_current_setting:Driver Current (mA)
label_bump_sensitivity:TMC bump sensitivity
label_hybrid_threshold:TMC HybridThreshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:Print Acceleration
label_retract_acceleration:Retract Acceleration
label_travel_acceleration:Travel Acceleration
label_retract_length:Retract length
label_retract_swap_length:Retract swap length
label_retract_feedrate:Retract feedrate
label_retract_z_lift:Z lift on retraction
label_recover_length:Extra recover length
label_swap_recover_length:Extra recover swap length
label_recover_feedrate:Recover feedrate
label_swap_recover_feedrate:Swap recover feedrate
label_mbl_offset:MBL Offset
label_save:Gravar
label_restore:Restore
label_reset:Reset
label_eeprom_save_info:Save printer settings to EEPROM?
label_eeprom_restore_info:Reload settings from EEPROM?
label_eeprom_reset_info:Reset EEPROM to stock printer settings?
label_settings_save:Save settings
label_settings_restore:Restore settings
label_settings_reset:Reset default settings
label_settings_reset_info:Reset all settings to default values?
label_settings_reset_done:Reset all settings successful.\nPlease restart the device.
label_page_up:Subir pagina
label_page_down:Pagina abaixo
label_up:Up
label_down:Down
label_next:Next
label_back:Voltar
label_inc:Aumentar
label_dec:Diminuir
label_load:Carregar
label_unload:Descarregar
label_on:ON
label_off:OFF
label_auto:AUTO
label_smart:SMART
label_slow:Lento
label_normal:Normal
label_fast:Rapido
label_zero:Zero
label_half:Half
label_full:Full
label_custom:Custom
label_clear:Clear
label_default:Default
label_start:Start
label_stop:Parar
label_pause:Pausar
label_resume:Resumir
label_init:Init
label_disconnect:Desconectar
label_shut_down:Desligar
label_force_shut_down:Force
label_emergencystop:EMERGENCIA STOP
label_preheat:Aquecer
label_preheat_both:Ambos
label_cooldown:Arrefecer
label_confirm:Confirme
label_cancel:Cancelar
label_warning:Aviso
label_continue:Continuar
label_confirmation:Are you sure?
label_status:Status
label_ready:Pronto
label_busy:Em processamento, aguarde...
label_loading:Carregando...
label_unconnected:Nenhuma impressora conectada!
label_info:Info
label_invalid_value:Invalid value(s)
label_timeout_reached:Timeout reached!
label_disconnect_info:Agora podes controlar a impressora com o computador!
label_shutting_down:Shutting down...
label_wait_temp_shut_down:Wait for the hotend temperature to be lower than %d ℃
label_power_failed:Continuar a imprimir?
label_process_running:Process already running!
label_process_completed:Process completed!
label_process_aborted:Process aborted!
label_tftsd:TFT SD
label_read_tftsd_error:Erro a ler TFT SD!
label_tftsd_inserted:Cartao inserido!
label_tftsd_removed:Cartao removido!
label_u_disk:U Disk
label_read_u_disk_error:Erro a ler U Disk!
label_u_disk_inserted:U Disk inserido!
label_u_disk_removed:U Disk removido!
label_onboardsd:OnboardSD
label_read_onboardsd_error:Erro a ler Onboard SD card!
label_filament_runout:Filamento runout!
label_disable_steppers:Disarm All
label_xy_unlock:Desbloquear XY
label_start_print:Start Printing:\n%s?
label_stop_print:Parar de imprimir?
label_is_pause:Nao e possível a extrusão durante a impressao,\npausar a impressao?
label_m0_pause:Paused by M0 command
label_test:Testar
label_deploy:Abrir
label_stow:Encolher
label_repeat:Repetir
label_nozzle:Nozzle
label_bed:Hotbed
label_chamber:Chamber
label_fan:Ventoinha
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 Sec.
label_10_seconds:10 Sec.
label_30_seconds:30 Sec.
label_60_seconds:1 Min.
label_120_seconds:2 Min.
label_300_seconds:5 Min.
label_white:Branco
label_black:Preto
label_blue:Azul
label_red:Vermelho
label_green:Verde
label_cyan:Turquesa
label_yellow:Amarelo
label_brown:Castanho
label_gray:Cinzento
label_orange:Orange
label_indigo:Indigo
label_violet:Violet
label_magenta:Magenta
label_purple:Purple
label_lime:Lime
label_darkblue:DarkBlue
label_darkgreen:DarkGreen
label_darkgray:DarkGray
label_heat:Aquecer
label_move:Mover
label_home:Inicio
label_print:Imprimir
label_extrude:Extrudir
label_settings:Configurar
label_screen_settings:Ecra
label_machine_settings:Impressora
label_marlin_mode_settings:MarlinMode
label_feature_settings:Extras
label_sound:Sound
label_rgb_settings:LED cor
label_rgb_off:Desligar
label_terminal:Terminal
label_leveling:Nivelar
label_point_1:Ponto 1
label_point_2:Ponto 2
label_point_3:Ponto 3
label_point_4:Ponto 4
label_point_5:Ponto 5
label_bed_leveling:Bed Level
label_bl_complete:Bed Leveling Complete
label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save!
label_bl_enable:BL: on
label_bl_disable:BL: off
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh Bed Leveling
label_abl_settings:Auto Bed Leveling
label_abl_settings_bbl:Bilinear Bed Leveling
label_abl_settings_ubl:Unified Bed Leveling
label_abl_settings_ubl_save:Save to slot
label_abl_settings_ubl_load:Load from slot
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot?
label_abl_z:Z Fade
label_level_corner:L corner
label_p_offset:P Offset
label_h_offset:H Offset
label_distance:Distance
label_load_unload:Load/Unload
label_load_unload_short:(Un)Load
label_touchscreen_adjust:Ajustar
label_more:Mais
label_screen_info:Info
label_bg_color:Background color
label_font_color:Font color
label_percentage:Percentagem
label_percentage_speed:Rapidez
label_percentage_flow:Fluxo
label_babystep:BabyStep
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Calibracao do Touch Screen
label_adjust_info:Por favor, clique no ponto vermelho
label_adjust_ok:Ajustado com sucesso
label_adjust_failed:Ajuste falhou, tente novamente
label_unifiedmove:Movimento
label_unifiedheat:Heat/Fan
label_touch_to_exit:Toque em qualquer lugar para sair
label_mainmenu:Menu
label_parameter_setting:Parâmetro
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Bed edge distance
label_tuning:Tuning
label_pid:PID
label_pid_title:PID autotune
label_pid_start_info:PID autotune may take some time to complete.\nContinue?
label_pid_start_info_2:PID autotune in progress!
label_pid_start_info_3:Do not touch the screen until completed (green LED ON)!
label_tune_extruder:Tune steps
label_tune_ext_extrude_100:Ext. 100mm
label_tune_ext_temp:Extruder tuning | Heat
label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
label_tune_ext_heatoff:Turn the heater off?
label_tune_ext_adj_esteps:Adjust E-Steps
label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
label_tune_ext_measured:Length remaining:
label_tune_ext_old_estep:Old e-steps: %0.2f
label_tune_ext_new_estep:New e-steps: %0.2f
label_connection_settings:Connection
label_notifications:Notifications
label_mesh_editor:Mesh edit
label_mesh_tuner:Mesh tuner
label_case_light:Case light
label_load_started:Loading filament.\nPlease wait for the process to complete.
label_unload_started:Unloading filament.\nPlease wait for the process to complete.
label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
label_print_finished: Print\n finished
label_main_screen:Main
label_previous_print_data:Brief
label_print_time:Print Time: %02u:%02u:%02u
label_filament_length:\nFilament length: %1.2fm
label_filament_weight:\nFilament weight: %1.2fg
label_filament_cost:\nFilament cost: %1.2f
label_no_filament_stats:\nFilament data not available.
label_click_for_more:Click for summary
label_ext_templow:Hotend temperature is below minimum temperature (%d℃).
label_heat_hotend:Heat hotend to %d℃?
label_desired_templow:Hotend temperature is below\ndesired temperature (%d℃).
label_wait_heat_up:Wait for it to heat up.
label_nozzle_stabilizing:Wait, nozzle stabilizing...
label_z_align:Z Align
label_macros:Macros
label_mesh_valid:Mesh Validation
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_ru.ini
================================================
#### Language Code:RU
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:Скорость
label_language:Русский
label_rotate_ui:Переворот
label_terminal_ack:ACK терминала (C°)
label_persistent_info:Нагрев в инфостроке
label_file_list_mode:Файлы в режиме строк
label_file_sort_by:Сортировать по
label_ack_notification:ACK стиль уведомления
label_emulate_m600:Эмуляция M600
label_serial_always_on:Серийный порт Всегда ВКЛЮЧЕН
label_marlin_fullscreen:Marlin на весь экран
label_marlin_show_title:Marlin Mode Title Support
label_marlin_type:Marlin тип режима
label_move_speed:Скорость (X Y Z)
label_auto_load_leveling:Автоматическая Загрузка Сетки
label_fan_speed_percent:Скорость вентилятора в процентах
label_xy_offset_probing:XY Офсет Датчика
label_z_steppers_alignment:Z Автоматическое выравнивание
label_ps_on:Автовыключение
label_fil_runout:Сенсор прутка
label_pl_recovery_en:Работа после потери питания
label_pl_recovery_home:Работа после потери питания с парковкой
label_btt_mini_ups:Поддержка BTT UPS
label_touch_sound:Звуки нажатий
label_toast_sound:Звуки инфостроки
label_alert_sound:Предупреждения
label_heater_sound:Уведомление о нагревателе
label_knob_led_color:Подсветка энкодера
label_knob_led_idle:Простой подсветки энкодера
label_lcd_brightness:Яркость
label_lcd_idle_brightness:Регулировка яркости LCD
label_lcd_idle_delay:Время до гашения LCD
label_start_gcode_enabled:G-код перед печатью
label_end_gcode_enabled:G-код после печати
label_cancel_gcode_enabled:G-код отмены печати
label_steps_setting:Настройка шагов на мм
label_maxfeedrate:MAX скорость подачи
label_maxacceleration:MAX ускорение
label_acceleration:Ускорение
label_jerk:Рывок
label_junction_deviation:Отклонение узла
label_home_offset:Дом - отступы
label_fwretract:M207 ретракт
label_fwrecover:M208 восстановление ретракта
label_retract_auto:Авто FW ретракт
label_hotend_offset:Смещение 2-го сопла
label_probe_offset:Смещение датчика
label_lin_advance:К-фактор
label_filament_setting:Диаметр прутка
label_current_setting:Настройка TMC драйверов
label_bump_sensitivity:TMC чувствительность удара
label_hybrid_threshold:TMC гибридный порог
label_stealth_chop:TMC StealthChop
label_print_acceleration:Печати
label_retract_acceleration:Ретракта
label_travel_acceleration:Перемещения
label_retract_length:Длина
label_retract_swap_length:Длина при смене сопла
label_retract_feedrate:Скорость
label_retract_z_lift:Подъём по Z
label_recover_length:Длина
label_swap_recover_length:Длина при смене сопла
label_recover_feedrate:Скорость
label_swap_recover_feedrate:Скорость при смене сопла
label_mbl_offset:MBL Смещение
label_save:Сохранить
label_restore:Вернуть
label_reset:Сброс
label_eeprom_save_info:Сохранить настройки принтера в EEPROM?
label_eeprom_restore_info:Загрузить настройки из EEPROM?
label_eeprom_reset_info:Сбрость EEPROM настройки принтера на начальные?
label_settings_save:Сохранить настройки
label_settings_restore:Восстановить настройки
label_settings_reset:Сбросить настройки
label_settings_reset_info:Все настройки будут сброшены по умолчанию.\nПродолжить?
label_settings_reset_done:Успешный сброс настроек экрана. Для полного вступления в силу,\nперегрузите устройство.
label_page_up:<---
label_page_down:--->
label_up:Вверх
label_down:Вниз
label_next:Следующий
label_back:Назад
label_inc:Увеличить
label_dec:Уменьшить
label_load:Загрузка
label_unload:Выгрузка
label_on:Вкл
label_off:Выкл
label_auto:AUTO
label_smart:Умный
label_slow:Медленно
label_normal:Обычно
label_fast:Быстро
label_zero:Обнулить
label_half:50%
label_full:Максимум
label_custom:Своё меню
label_clear:Убрать
label_default:По умолчанию
label_start:Начать
label_stop:Стоп
label_pause:Пауза
label_resume:Продолжить
label_init:Инициализация
label_disconnect:Отключить
label_shut_down:Выключить
label_force_shut_down:Принудительно выкл
label_emergencystop:Экст.стоп
label_preheat:Преднагрев
label_preheat_both:Оба
label_cooldown:Охладить
label_confirm:OK
label_cancel:Отмена
label_warning:Внимание
label_continue:Продолжение
label_confirmation:Вы уверены?
label_status:Статус
label_ready:Готов
label_busy:В процессе, ждите...
label_loading:Загрузка...
label_unconnected:Нет подключения!
label_info:Информация
label_invalid_value:Остутствуют правильные значения!
label_timeout_reached:Время истекло!
label_disconnect_info:Управление принтером через компьютер
label_shutting_down:Выключаю...
label_wait_temp_shut_down:Дождитесь температуры сопла не ниже чем %d℃
label_power_failed:Продолжить печать?
label_process_running:Идёт процесс!
label_process_completed:Процесс завершён!
label_process_aborted:Процесс прерван!
label_tftsd:SD экрана
label_read_tftsd_error:Ошибка чтения SD карты!
label_tftsd_inserted:SD карта вставлена!
label_tftsd_removed:SD карта извлечена!
label_u_disk:Флеш карта
label_read_u_disk_error:Ошибка чтения флеш карты!
label_u_disk_inserted:Флеш карта вставлена!
label_u_disk_removed:Флеш карта извлечена!
label_onboardsd:SD платы
label_read_onboardsd_error:Ошибка чтения SD карты!
label_filament_runout:Пруток закончился
label_disable_steppers:Двигатели
label_xy_unlock:Моторы выкл
label_start_print:Начать печать:\n%s?
label_stop_print:Остановить печать?
label_is_pause:Невозможна экструзия при печати, поставить\nна паузу?
label_m0_pause:Пауза по команде M0
label_test:BLT тест
label_deploy:BLT вниз
label_stow:BLT вверх
label_repeat:Точность Z
label_nozzle:Сопло
label_bed:Стол
label_chamber:Камера
label_fan:Вентилятор
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01мм
label_01_mm:0.1мм
label_1_mm:1мм
label_5_mm:5мм
label_10_mm:10мм
label_100_mm:100мм
label_200_mm:200мм
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 сек.
label_10_seconds:10 сек.
label_30_seconds:30 сек.
label_60_seconds:1 мин.
label_120_seconds:2 мин.
label_300_seconds:5 мин.
label_white:Белый
label_black:Чёрный
label_blue:Синий
label_red:Красный
label_green:Зелёный
label_cyan:Голубой
label_yellow:Жёлтый
label_brown:Коричневый
label_gray:Серый
label_orange:Оранжевый
label_indigo:Индиго
label_violet:Фиолетовый
label_magenta:Маджента
label_purple:Пурпурный
label_lime:Лаймовый
label_darkblue:Тёмно-синий
label_darkgreen:Тёмно-зелёный
label_darkgray:Тёмно-серый
label_heat:Нагрев
label_move:Движение
label_home:Домой
label_print:Печать
label_extrude:Экструзия
label_settings:Настройки
label_screen_settings:Экран
label_machine_settings:Принтер
label_marlin_mode_settings:MarlinMode
label_feature_settings:Опции
label_sound:Звуки
label_rgb_settings:Цвет LED
label_rgb_off:LED выкл
label_terminal:Терминал
label_leveling:Стол вруч.
label_point_1:Точка 1
label_point_2:Точка 2
label_point_3:Точка 3
label_point_4:Точка 4
label_point_5:Точка 5
label_bed_leveling:Стол равнен.
label_bl_complete:Выравнивание стола окончено
label_bl_smart_fill:Отсутствующие точки замера были атоматически заполнены.\nЗапомните для сохраниения!
label_bl_enable:BL: вкл
label_bl_disable:BL: выкл
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Равнение по сетке
label_abl_settings:Автовыравнивание
label_abl_settings_bbl:Билинейная калибровка
label_abl_settings_ubl:Универсальная калибровка
label_abl_settings_ubl_save:Сохранить в ячейку
label_abl_settings_ubl_load:Загрузить из ячейки
label_abl_slot0:Ячейка 0
label_abl_slot1:Ячейка 1
label_abl_slot2:Ячейка 2
label_abl_slot3:Ячейка 3
label_abl_slot_eeprom:Восстановить из ячейки при перезагрузке?\n(Сохранить в EEPROM)
label_abl_z:Z затухание
label_level_corner:Прямой угол
label_p_offset:Отступ P
label_h_offset:Отступ H
label_distance:Отступы
label_load_unload:Загрузить/Выгрузить
label_load_unload_short:За/Выгрузка
label_touchscreen_adjust:Калибровка
label_more:Больше
label_screen_info:Инфо
label_bg_color:Фоновый цвет
label_font_color:Цвет шрифта
label_percentage:Подстройки
label_percentage_speed:Скорость
label_percentage_flow:Поток
label_babystep:Микрошаг Z
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Калибровка экрана
label_adjust_info:Нажмите на красную точку
label_adjust_ok:Успешная калибровка
label_adjust_failed:Неудачная калибровка, попробуйте снова
label_unifiedmove:Движение
label_unifiedheat:Нагрев
label_touch_to_exit:Нажмите для возврата
label_mainmenu:Меню
label_parameter_setting:Параметры
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Отступы от краёв стола
label_tuning:Наладка
label_pid:PID
label_pid_title:PID автонастройка
label_pid_start_info:Сейчас будет запущена PID автонастройка, это займёт некоторое время. Продолжить?
label_pid_start_info_2:Автонастройка PID в работе!
label_pid_start_info_3:Не трогайте экран до окончания настройки (загориться зелёным LED)!
label_tune_extruder:Настройка шагов
label_tune_ext_extrude_100:100мм экст.
label_tune_ext_temp:Настройка экструдера/Нагрев
label_tune_ext_mark120mm:Отметьте 120 мм на прутке\nНажмите '%s' по говности\nИзмерьте полученную длину/nпосле экструдирования
label_tune_ext_heatoff:Отключить нагрев?
label_tune_ext_adj_esteps:Подстройка E-шагов
label_tune_ext_esteps_saved:E-шаги установлены!\nНе забудьте сохранить их в EEPROM\nНовое значение: %0.2f
label_tune_ext_measured:Оставшаяся длина:
label_tune_ext_old_estep:Старые E-шаги: %0.2f
label_tune_ext_new_estep:Новые E-шаги: %0.2f
label_connection_settings:Соединение
label_notifications:Уведомления
label_mesh_editor:Сетка ред.
label_mesh_tuner:Сетка настр.
label_case_light:Подсветка
label_load_started:Загрузка прутка начата.\nДождитесь пока сопло достигнет необходимой температуры.\nПожалуйста подождите.
label_unload_started:Выгрузка прутка начата.\nДождитесь пока сопло достигнет необходимой температуры.\nПожалуйста подождите.
label_heaters_on:Некоторые нагреватели все еще работают.\nХотите прервать нагрев?
label_print_finished: Печать\n закончена
label_main_screen:Главный
label_previous_print_data:Краткий
label_print_time:Время печати: %02u:%02u:%02u
label_filament_length:\nДлина прутка: %1.2fm
label_filament_weight:\nВес прутка: %1.2fg
label_filament_cost:\nЦена прутка: %1.2f
label_no_filament_stats:\nДанные о прутке отсутствуют.
label_click_for_more:Нажмите для получения сводки
label_ext_templow:Температура сопла ниже минимальной (%d℃).
label_heat_hotend:Нагреть сопло до %d℃?
label_desired_templow:Температура сопла низка\nжелательная температура (%d℃).
label_wait_heat_up:Подождите, пока он нагреется.
label_nozzle_stabilizing:Подождите, сопло стабилизируется...
label_z_align:Z Выравнивание
label_macros:Макросы
label_mesh_valid:Проверка сетки
label_wait_for_temp:Please wait for the temperature to rise
label_stop_plane_test:Do you want to stop the plane test?
================================================
FILE: Firmware/2021-04-28/Screen-210609/Language Packs/language_sk.ini
================================================
#### Language Code:SK
## Language Version:20210530
## Maximum byte per keyword is 250 Bytes.
## Escape characters are not supported except newline '\n'
label_baudrate:BaudRate
label_language:Slovensky
label_rotate_ui:Otočiť
label_terminal_ack:Show ACK in Terminal
label_persistent_info:Trvalé info o stave
label_file_list_mode:Zobraziť súbory ako zoznam
label_file_sort_by:Sort files by
label_ack_notification:ACK notification style
label_emulate_m600:Emulate M600
label_serial_always_on:Serial Always ON
label_marlin_fullscreen:Marlin mode in fullscreen
label_marlin_show_title:Marlin Mode Title Support
label_marlin_type:Marlin Mode Type
label_move_speed:Rýchlosť pohybu XYZ
label_auto_load_leveling:Auto Save Load Leveling
label_fan_speed_percent:Fan Speed As Percentage
label_xy_offset_probing:XY Offset Probing Support
label_z_steppers_alignment:Z Steppers Auto-Alignment
label_ps_on:Auto vyp.
label_fil_runout:Filament senzor
label_pl_recovery_en:Power loss recovery
label_pl_recovery_home:Power Loss Recovery Homing
label_btt_mini_ups:BTT UPS Support
label_touch_sound:Touch sounds
label_toast_sound:Toast Notifications
label_alert_sound:Popups and Alerts
label_heater_sound:Heater notification
label_knob_led_color:LED otočného tlačidla
label_knob_led_idle:Rotary Knob LED idle
label_lcd_brightness:Jas LCD
label_lcd_idle_brightness:Zníženie jasu LCD
label_lcd_idle_delay:Zníženie jasu LCD po
label_start_gcode_enabled:Začiatočný Gcode
label_end_gcode_enabled:Koncový Gcode
label_cancel_gcode_enabled:Cancel Gcode
label_steps_setting:Počet krokov na MM
label_maxfeedrate:Max Feed Rate
label_maxacceleration:Maximálna akcelerácia
label_acceleration:Akcelerácia
label_jerk:Jerk
label_junction_deviation:Junction Deviation
label_home_offset:Home Offset
label_fwretract:FW Retraction
label_fwrecover:FW Retraction Recover
label_retract_auto:Auto Firmware Retract
label_hotend_offset:Offset 2nd Nozzle
label_probe_offset:Probe Offset
label_lin_advance:Linear Advance
label_filament_setting:Filament Diameter
label_current_setting:Prúd ovládača (mA)
label_bump_sensitivity:TMC bump citlivosť
label_hybrid_threshold:TMC HybridThreshold
label_stealth_chop:TMC StealthChop
label_print_acceleration:Akcelerácia pri tlači
label_retract_acceleration:Akcelerácia retrakcie
label_travel_acceleration:Akcelerácia presunu
label_retract_length:Retract length
label_retract_swap_length:Retract swap length
label_retract_feedrate:Retract feedrate
label_retract_z_lift:Z lift on retraction
label_recover_length:Extra recover length
label_swap_recover_length:Extra recover swap length
label_recover_feedrate:Recover feedrate
label_swap_recover_feedrate:Swap recover feedrate
label_mbl_offset:MBL Offset
label_save:Uložiť
label_restore:Restore
label_reset:Reset
label_eeprom_save_info:Save printer settings to EEPROM?
label_eeprom_restore_info:Reload settings from EEPROM?
label_eeprom_reset_info:Reset EEPROM to stock printer settings?
label_settings_save:Save settings
label_settings_restore:Restore settings
label_settings_reset:Reset default settings
label_settings_reset_info:Resetovať všetky nastavenia.
label_settings_reset_done:Reset všetkých nastavení vykonaný. Pre správne fungovanie, prosím,\nreštartovať zariadenie.
label_page_up:Ďalej
label_page_down:Naspäť
label_up:Up
label_down:Down
label_next:Next
label_back:Naspäť
label_inc:Pridať
label_dec:Ubrať
label_load:Zaviesť
label_unload:Vysunúť
label_on:ZAP
label_off:VYP
label_auto:AUTO
label_smart:SMART
label_slow:Pomaly
label_normal:Normálne
label_fast:Rýchlo
label_zero:Vypnúť
label_half:Polovičná
label_full:Naplno
label_custom:Vlastné
label_clear:Clear
label_default:Default
label_start:Start
label_stop:Stop
label_pause:Pauza
label_resume:Pokračovať
label_init:Init
label_disconnect:Odpojiť
label_shut_down:Vypnúť
label_force_shut_down:Vynútené vypnutie
label_emergencystop:STOP
label_preheat:Nahriať
label_preheat_both:Tryska/Podložka
label_cooldown:Ochladiť
label_confirm:Potvrdiť
label_cancel:Zrušiť
label_warning:Varovanie
label_continue:Pokračovať
label_confirmation:Are you sure?
label_status:Status
label_ready:Pripravená
label_busy:Počkajte prosím...
label_loading:Načítavam...
label_unconnected:Tlačiareň odpojená!
label_info:Info
label_invalid_value:Invalid value(s)
label_timeout_reached:Timeout reached!
label_disconnect_info:Teraz môžete tlačiareň ovládať z počítača!
label_shutting_down:Vypínanie...
label_wait_temp_shut_down:Počkať na teplotu trysky menej ako %d℃
label_power_failed:Pokračovať v tlači?
label_process_running:Process already running!
label_process_completed:Process completed!
label_process_aborted:Process aborted!
label_tftsd:TFT SD
label_read_tftsd_error:Chyba pri načítaní SD karty!
label_tftsd_inserted:SD karta vložená!
label_tftsd_removed:SD karta odstránená!
label_u_disk:USB kľúč
label_read_u_disk_error:Chyba pri načítaní USB kľúča!
label_u_disk_inserted:USB kľúč vložený!
label_u_disk_removed:USB disk odstránený!
label_onboardsd:SD karta na doske
label_read_onboardsd_error:Chyba pri načítaní SD karty na doske!
label_filament_runout:Chýba filament!
label_disable_steppers:Disarm All
label_xy_unlock:Odomknite XY
label_start_print:Start Printing:\n%s?
label_stop_print:Zastaviť tlač?
label_is_pause:Nemožno extrudovať počas tlače,\npozastaviť tlač?
label_m0_pause:Pauza príkazom M0
label_test:Test
label_deploy:Vystrčiť
label_stow:Stiahnuť
label_repeat:Opakovať
label_nozzle:Tryska
label_bed:Podložka
label_chamber:Chamber
label_fan:Ofuk
label_bltouch:BLTouch
label_touchmi:TouchMi
label_1_degree:1℃
label_5_degree:5℃
label_10_degree:10℃
label_001_mm:0.01mm
label_01_mm:0.1mm
label_1_mm:1mm
label_5_mm:5mm
label_10_mm:10mm
label_100_mm:100mm
label_200_mm:200mm
label_1_percent:1%
label_5_percent:5%
label_10_percent:10%
label_percent_value:%d%%
label_5_seconds:5 sek.
label_10_seconds:10 sek.
label_30_seconds:30 Sec.
label_60_seconds:1 Min.
label_120_seconds:2 Min.
label_300_seconds:5 Min.
label_white:Biela
label_black:Čierna
label_blue:Modrá
label_red:Červená
label_green:Zelená
label_cyan:Tyrkysová
label_yellow:Žltá
label_brown:Hnedá
label_gray:Šedá
label_orange:Oranžová
label_indigo:Indigo
label_violet:Fialová
label_magenta:Magenta
label_purple:Purple
label_lime:Lime
label_darkblue:DarkBlue
label_darkgreen:DarkGreen
label_darkgray:DarkGray
label_heat:Teplota
label_move:Posunúť
label_home:Domov
label_print:Tlačiť
label_extrude:Extrúder
label_settings:Nastavenia
label_screen_settings:Obrazovka
label_machine_settings:Tlačiareň
label_marlin_mode_settings:MarlinMode
label_feature_settings:Funkcie
label_sound:Sound
label_rgb_settings:Farba LED
label_rgb_off:Vypnúť LED
label_terminal:Terminál
label_leveling:Vyrovnanie
label_point_1:Bod 1
label_point_2:Bod 2
label_point_3:Bod 3
label_point_4:Bod 4
label_point_5:Bod 5
label_bed_leveling:Bed Level
label_bl_complete:Bed Leveling Complete
label_bl_smart_fill:Missing probe points have been smart filled.\n\nNote: remember to save!
label_bl_enable:BL: on
label_bl_disable:BL: off
label_abl:ABL
label_bbl:BBL
label_ubl:UBL
label_mbl:MBL
label_mbl_settings:Mesh Bed Leveling
label_abl_settings:Auto Bed Leveling
label_abl_settings_bbl:Bilinear Bed Leveling
label_abl_settings_ubl:Unified Bed Leveling
label_abl_settings_ubl_save:Save to slot
label_abl_settings_ubl_load:Load from slot
label_abl_slot0:Slot 0
label_abl_slot1:Slot 1
label_abl_slot2:Slot 2
label_abl_slot3:Slot 3
label_abl_slot_eeprom:Save the mesh to EEPROM to load after reboot?
label_abl_z:Z Fade
label_level_corner:L corner
label_p_offset:P Offset
label_h_offset:H Offset
label_distance:Distance
label_load_unload:Load/Unload
label_load_unload_short:(Un)Load
label_touchscreen_adjust:Kalibrácia
label_more:Viacej
label_screen_info:Info
label_bg_color:Background color
label_font_color:Font color
label_percentage:Percentá
label_percentage_speed:Rýchlosť
label_percentage_flow:Prietok
label_babystep:BabyStep
label_x_inc:X+
label_y_inc:Y+
label_z_inc:Z+
label_x_dec:X-
label_y_dec:Y-
label_z_dec:Z-
label_x:X
label_y:Y
label_z:Z
label_adjust_title:Kalibrácia
label_adjust_info:Dotknite sa postupne všetkých bodov
label_adjust_ok:Kalibrácia úspešná
label_adjust_failed:Kalibrácia zlyhala, opakovať
label_unifiedmove:Pohyb
label_unifiedheat:Nahriať
label_touch_to_exit:Dotknite sa obrazovky pre ukončenie
label_mainmenu:Menu
label_parameter_setting:Parametre
label_eeprom_settings:EEPROM
label_leveling_edge_distance:Bed edge distance
label_tuning:Tuning
label_pid:PID
label_pid_title:PID autotune
label_pid_start_info:PID autotune may take some time to complete.\nContinue?
label_pid_start_info_2:PID autotune in progress!
label_pid_start_info_3:Do not touch the screen until completed (green LED ON)!
label_tune_extruder:Tune steps
label_tune_ext_extrude_100:Ext. 100mm
label_tune_ext_temp:Extruder tuning | Heat
label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
label_tune_ext_heatoff:Turn the heater off?
label_tune_ext_adj_esteps:Adjust E-Steps
label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
label_tune_ext_measured:Length remaining:
label_tune_ext_old_estep:Old e-steps: %0.2f
label_tune_ext_new_estep:New e-steps: %0.2f
label_connection_settings:Connection
label_notifications:Notifications
label_mesh_editor:Mesh edit
label_mesh_tuner:Mesh tuner
label_case_light:Case light
label_load_started:Loading filament.\nPlease wait for the process to complete.
label_unload_started:Unloading filament.\nPlease wait for the process to complete.
label_heaters_on:Some heaters are still ON.\n
gitextract_6bv4_tqd/
├── B1-IDEX firmware/
│ └── RRF/
│ ├── filaments/
│ │ └── nop.g
│ ├── gcodes/
│ │ └── nop.g
│ ├── macros/
│ │ ├── copy.g
│ │ ├── dualx.g
│ │ ├── mirror.g
│ │ └── wg.g
│ └── sys/
│ ├── bed.g
│ ├── board.txt
│ ├── config.g
│ ├── config.json
│ ├── deployprobe.g
│ ├── dwc-settings.json
│ ├── homeall.g
│ ├── homeu.g
│ ├── homex.g
│ ├── homey.g
│ ├── homez.g
│ ├── pause.g
│ ├── probe.g
│ ├── resume.g
│ ├── retractprobe.g
│ ├── sleep.g
│ ├── stop.g
│ ├── tfree0.g
│ ├── tfree1.g
│ ├── tpost0.g
│ ├── tpost1.g
│ ├── tpre0.g
│ └── tpre1.g
├── Firmware/
│ ├── 2021-04-28/
│ │ └── Screen-210609/
│ │ ├── Language Packs/
│ │ │ ├── language_am.ini
│ │ │ ├── language_ca.ini
│ │ │ ├── language_cn.ini
│ │ │ ├── language_cz.ini
│ │ │ ├── language_de.ini
│ │ │ ├── language_du.ini
│ │ │ ├── language_en.ini
│ │ │ ├── language_es.ini
│ │ │ ├── language_fr.ini
│ │ │ ├── language_gr.ini
│ │ │ ├── language_hu.ini
│ │ │ ├── language_it.ini
│ │ │ ├── language_jp.ini
│ │ │ ├── language_pl.ini
│ │ │ ├── language_pt.ini
│ │ │ ├── language_ru.ini
│ │ │ ├── language_sk.ini
│ │ │ ├── language_sl.ini
│ │ │ ├── language_tc.ini
│ │ │ ├── language_tr.ini
│ │ │ └── language_uk.ini
│ │ ├── TFT35/
│ │ │ ├── bmp/
│ │ │ │ └── readme.md
│ │ │ └── font/
│ │ │ ├── 8x16_byte_ascii.fon
│ │ │ ├── byte_ascii.fon
│ │ │ ├── large_byte_ascii.fon
│ │ │ ├── readme.md
│ │ │ └── word_unicode.fon
│ │ ├── config.ini
│ │ └── language_cn.ini
│ ├── 2022-03-27/
│ │ ├── Motherboard-2022-03-27/
│ │ │ ├── Motherboard-SKR 2-F407/
│ │ │ │ └── admin.txt
│ │ │ ├── Motherboard-SKR 2-F429/
│ │ │ │ └── admin.txt
│ │ │ └── Motherboard-SKR V1.4/
│ │ │ └── admin.txt
│ │ └── Screen-2022-03-27/
│ │ ├── BTT B1 TFT35 V3.0 - STM32/
│ │ │ ├── Language Packs/
│ │ │ │ ├── language_am.ini
│ │ │ │ ├── language_br.ini
│ │ │ │ ├── language_ca.ini
│ │ │ │ ├── language_cn.ini
│ │ │ │ ├── language_cz.ini
│ │ │ │ ├── language_de.ini
│ │ │ │ ├── language_en.ini
│ │ │ │ ├── language_es.ini
│ │ │ │ ├── language_fr.ini
│ │ │ │ ├── language_gr.ini
│ │ │ │ ├── language_hu.ini
│ │ │ │ ├── language_it.ini
│ │ │ │ ├── language_jp.ini
│ │ │ │ ├── language_nl.ini
│ │ │ │ ├── language_pl.ini
│ │ │ │ ├── language_pt.ini
│ │ │ │ ├── language_ru.ini
│ │ │ │ ├── language_sk.ini
│ │ │ │ ├── language_sl.ini
│ │ │ │ ├── language_tc.ini
│ │ │ │ ├── language_tr.ini
│ │ │ │ └── language_uk.ini
│ │ │ ├── TFT35/
│ │ │ │ ├── bmp/
│ │ │ │ │ └── readme.md
│ │ │ │ └── font/
│ │ │ │ ├── 8x16_byte_ascii.fon
│ │ │ │ ├── byte_ascii.fon
│ │ │ │ ├── large_byte_ascii.fon
│ │ │ │ ├── readme.md
│ │ │ │ └── word_unicode.fon
│ │ │ ├── admin.txt
│ │ │ ├── config.ini
│ │ │ └── language_cn.ini
│ │ └── BTT B1 TFT35 V3.0.1 - GD32/
│ │ ├── Language Packs/
│ │ │ ├── language_am.ini
│ │ │ ├── language_br.ini
│ │ │ ├── language_ca.ini
│ │ │ ├── language_cn.ini
│ │ │ ├── language_cz.ini
│ │ │ ├── language_de.ini
│ │ │ ├── language_en.ini
│ │ │ ├── language_es.ini
│ │ │ ├── language_fr.ini
│ │ │ ├── language_gr.ini
│ │ │ ├── language_hu.ini
│ │ │ ├── language_it.ini
│ │ │ ├── language_jp.ini
│ │ │ ├── language_nl.ini
│ │ │ ├── language_pl.ini
│ │ │ ├── language_pt.ini
│ │ │ ├── language_ru.ini
│ │ │ ├── language_sk.ini
│ │ │ ├── language_sl.ini
│ │ │ ├── language_tc.ini
│ │ │ ├── language_tr.ini
│ │ │ └── language_uk.ini
│ │ ├── TFT35/
│ │ │ ├── bmp/
│ │ │ │ └── readme.md
│ │ │ └── font/
│ │ │ ├── 8x16_byte_ascii.fon
│ │ │ ├── byte_ascii.fon
│ │ │ ├── large_byte_ascii.fon
│ │ │ ├── readme.md
│ │ │ └── word_unicode.fon
│ │ ├── admin.txt
│ │ ├── config.ini
│ │ └── language_cn.ini
│ ├── README.md
│ └── lpc176x_usb_driver.inf
├── Printed parts/
│ ├── Adapter plate cover-200331.STL
│ ├── Air guide-0519.STL
│ ├── Chassis TYPE-C interface protection cover.STL
│ ├── Consumable frame nut.STL
│ └── Nozzle TYPE-C protective cover.STL
├── README.md
└── TF card data/
└── English/
├── Setting files/
│ └── biqu-b1 configuration file.curaprofile
└── models/
├── CFFFP_Little Bear.gcode
└── CFFFP_Pokémon.gcode
Copy disabled (too large)
Download .json
Condensed preview — 134 files, each showing path, character count, and a content snippet. Download the .json file for the full structured content (10,406K chars).
[
{
"path": "B1-IDEX firmware/RRF/filaments/nop.g",
"chars": 1,
"preview": ";"
},
{
"path": "B1-IDEX firmware/RRF/gcodes/nop.g",
"chars": 1,
"preview": ";"
},
{
"path": "B1-IDEX firmware/RRF/macros/copy.g",
"chars": 28,
"preview": "M505 P\"copy\"\nM98 P\"config.g\""
},
{
"path": "B1-IDEX firmware/RRF/macros/dualx.g",
"chars": 20,
"preview": "M505\nM98 P\"config.g\""
},
{
"path": "B1-IDEX firmware/RRF/macros/mirror.g",
"chars": 30,
"preview": "M505 P\"mirror\"\nM98 P\"config.g\""
},
{
"path": "B1-IDEX firmware/RRF/macros/wg.g",
"chars": 25,
"preview": "M557 X-50：110 Y10：210 S40"
},
{
"path": "B1-IDEX firmware/RRF/sys/bed.g",
"chars": 217,
"preview": "; bed.g\n; called to perform automatic bed compensation via G32\n;\n; generated by RepRapFirmware Configuration Tool v3.1.1"
},
{
"path": "B1-IDEX firmware/RRF/sys/board.txt",
"chars": 1897,
"preview": "// Board Hardware configuration file for BTT SKR-2\n// generated by RepRapFirmware Configuration Tool (LPC Version) v3.1"
},
{
"path": "B1-IDEX firmware/RRF/sys/config.g",
"chars": 5361,
"preview": "; Configuration file for BTT E3 RRF v1.0 (firmware version 3)\n; executed by the firmware on start-up\n;\n; generated by Re"
},
{
"path": "B1-IDEX firmware/RRF/sys/config.json",
"chars": 3953,
"preview": "{\"board\":\"btt_rrf_e3_1.0\",\"expansion_boards\":[],\"firmware\":3,\"standalone\":true,\"nvram\":false,\"auto_save\":{\"enabled\":fals"
},
{
"path": "B1-IDEX firmware/RRF/sys/deployprobe.g",
"chars": 77,
"preview": ";if state.currentTool==0\n;M106P3S255;\n;if state.currentTool==1\n;M106P2S255;"
},
{
"path": "B1-IDEX firmware/RRF/sys/dwc-settings.json",
"chars": 1281,
"preview": "{\"main\":{\"language\":\"en\",\"lastHostname\":\"192.168.1.103\",\"darkTheme\":false,\"useBinaryPrefix\":true,\"disableAutoComplete\":f"
},
{
"path": "B1-IDEX firmware/RRF/sys/homeall.g",
"chars": 519,
"preview": "; homeall.g\n; called to home all axes\n;\n; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 202"
},
{
"path": "B1-IDEX firmware/RRF/sys/homeu.g",
"chars": 510,
"preview": "; homex.g\n; called to home the X axis\n;\n; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 202"
},
{
"path": "B1-IDEX firmware/RRF/sys/homex.g",
"chars": 512,
"preview": "; homex.g\n; called to home the X axis\n;\n; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 202"
},
{
"path": "B1-IDEX firmware/RRF/sys/homey.g",
"chars": 512,
"preview": "; homey.g\n; called to home the Y axis\n;\n; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 202"
},
{
"path": "B1-IDEX firmware/RRF/sys/homez.g",
"chars": 315,
"preview": "; homez.g\n; called to home the Z axis\n;\n; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC on Tue Jan 19 202"
},
{
"path": "B1-IDEX firmware/RRF/sys/pause.g",
"chars": 388,
"preview": "; pause.g\n; called when a print from SD card is paused\n;\n; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC "
},
{
"path": "B1-IDEX firmware/RRF/sys/probe.g",
"chars": 0,
"preview": ""
},
{
"path": "B1-IDEX firmware/RRF/sys/resume.g",
"chars": 391,
"preview": "; resume.g\n; called before a print from SD card is resumed\n;\n; generated by RepRapFirmware Configuration Tool v3.1.10+4-"
},
{
"path": "B1-IDEX firmware/RRF/sys/retractprobe.g",
"chars": 74,
"preview": ";if state.currentTool==0 \n;M106P3S0;\n;if state.currentTool==1\n;M106P2S0;"
},
{
"path": "B1-IDEX firmware/RRF/sys/sleep.g",
"chars": 166,
"preview": "; sleep.g\n; called when M1 (Sleep) is being processed\n;\n; generated by RepRapFirmware Configuration Tool v3.1.10+4-LPC o"
},
{
"path": "B1-IDEX firmware/RRF/sys/stop.g",
"chars": 198,
"preview": "; stop.g\n; called when M0 (Stop) is run (e.g. when a print from SD card is cancelled)\n;\n; generated by RepRapFirmware Co"
},
{
"path": "B1-IDEX firmware/RRF/sys/tfree0.g",
"chars": 217,
"preview": "; tfree0.g\n; called when tool 0 is freed\n;\n; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep 11 2020 20"
},
{
"path": "B1-IDEX firmware/RRF/sys/tfree1.g",
"chars": 216,
"preview": "; tfree1.g\n; called when tool 1 is freed\n;\n; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep 11 2020 20"
},
{
"path": "B1-IDEX firmware/RRF/sys/tpost0.g",
"chars": 246,
"preview": "; tpost0.g\n; called after tool 0 has been selected\n;\n; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep "
},
{
"path": "B1-IDEX firmware/RRF/sys/tpost1.g",
"chars": 247,
"preview": "; tpost1.g\n; called after tool 1 has been selected\n;\n; generated by RepRapFirmware Configuration Tool v3.1.4 on Fri Sep "
},
{
"path": "B1-IDEX firmware/RRF/sys/tpre0.g",
"chars": 0,
"preview": ""
},
{
"path": "B1-IDEX firmware/RRF/sys/tpre1.g",
"chars": 0,
"preview": ""
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_am.ini",
"chars": 10334,
"preview": "#### Language Code:AM\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_ca.ini",
"chars": 10838,
"preview": "#### Language Code:CA\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_cn.ini",
"chars": 8159,
"preview": "#### Language Code:CN\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_cz.ini",
"chars": 10509,
"preview": "#### Language Code:CZ\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_de.ini",
"chars": 10482,
"preview": "#### Language Code:DE\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_du.ini",
"chars": 10555,
"preview": "#### Language Code:DU\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_en.ini",
"chars": 10262,
"preview": "#### Language Code:EN\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_es.ini",
"chars": 10531,
"preview": "#### Language Code:ES\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_fr.ini",
"chars": 10881,
"preview": "#### Language Code:FR\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_gr.ini",
"chars": 11043,
"preview": "#### Language Code:GR\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_hu.ini",
"chars": 10680,
"preview": "#### Language Code:HU\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_it.ini",
"chars": 10769,
"preview": "#### Language Code:IT\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_jp.ini",
"chars": 9477,
"preview": "#### Language Code:JP\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_pl.ini",
"chars": 10357,
"preview": "#### Language Code:PL\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_pt.ini",
"chars": 10435,
"preview": "#### Language Code:PT\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_ru.ini",
"chars": 10763,
"preview": "#### Language Code:RU\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_sk.ini",
"chars": 10419,
"preview": "#### Language Code:SK\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_sl.ini",
"chars": 10419,
"preview": "#### Language Code:SL\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_tc.ini",
"chars": 8703,
"preview": "#### Language Code:TC\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_tr.ini",
"chars": 10439,
"preview": "#### Language Code:TR\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/Language Packs/language_uk.ini",
"chars": 10969,
"preview": "#### Language Code:UK\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2021-04-28/Screen-210609/TFT35/bmp/readme.md",
"chars": 118,
"preview": "ImageMagick command\n\nconvert Reserve_6.bmp -alpha set -define bmp:format=bmp3 -define bmp3:alpha=true Reserve_6.bmp\n\n\n"
},
{
"path": "Firmware/2021-04-28/Screen-210609/TFT35/font/readme.md",
"chars": 183,
"preview": "The \"byte_ascii.fon\" is the bitmap fonts of ASCII, size: 12*24\n\nThe \"word_unicode.fon\" is the bitmap fonts of UTF-16, si"
},
{
"path": "Firmware/2021-04-28/Screen-210609/config.ini",
"chars": 25949,
"preview": "#--------------------------------------------------------------------\n#\n# DEFAULT CONFIG FILE FOR BigTreeTech TFT CONTRO"
},
{
"path": "Firmware/2021-04-28/Screen-210609/language_cn.ini",
"chars": 8159,
"preview": "#### Language Code:CN\n## Language Version:20210530\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Motherboard-2022-03-27/Motherboard-SKR 2-F407/admin.txt",
"chars": 0,
"preview": ""
},
{
"path": "Firmware/2022-03-27/Motherboard-2022-03-27/Motherboard-SKR 2-F429/admin.txt",
"chars": 0,
"preview": ""
},
{
"path": "Firmware/2022-03-27/Motherboard-2022-03-27/Motherboard-SKR V1.4/admin.txt",
"chars": 0,
"preview": ""
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_am.ini",
"chars": 12137,
"preview": "#### Language Code:AM\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_br.ini",
"chars": 12498,
"preview": "#### Language Code:BR\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_ca.ini",
"chars": 12640,
"preview": "#### Language Code:CA\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_cn.ini",
"chars": 9861,
"preview": "#### Language Code:CN\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_cz.ini",
"chars": 12169,
"preview": "#### Language Code:CZ\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_de.ini",
"chars": 12342,
"preview": "#### Language Code:DE\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_en.ini",
"chars": 12063,
"preview": "#### Language Code:EN\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_es.ini",
"chars": 12333,
"preview": "#### Language Code:ES\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_fr.ini",
"chars": 12749,
"preview": "#### Language Code:FR\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_gr.ini",
"chars": 12855,
"preview": "#### Language Code:GR\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_hu.ini",
"chars": 12540,
"preview": "#### Language Code:HU\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_it.ini",
"chars": 12639,
"preview": "#### Language Code:IT\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_jp.ini",
"chars": 11277,
"preview": "#### Language Code:JP\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_nl.ini",
"chars": 12352,
"preview": "#### Language Code:NL\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_pl.ini",
"chars": 13003,
"preview": "#### Language Code:PL\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_pt.ini",
"chars": 12233,
"preview": "#### Language Code:PT\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_ru.ini",
"chars": 12562,
"preview": "#### Language Code:RU\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_sk.ini",
"chars": 12218,
"preview": "#### Language Code:SK\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_sl.ini",
"chars": 12211,
"preview": "#### Language Code:SL\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_tc.ini",
"chars": 10501,
"preview": "#### Language Code:TC\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_tr.ini",
"chars": 12238,
"preview": "#### Language Code:TR\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/Language Packs/language_uk.ini",
"chars": 12798,
"preview": "#### Language Code:UK\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/TFT35/bmp/readme.md",
"chars": 118,
"preview": "ImageMagick command\n\nconvert Reserve_6.bmp -alpha set -define bmp:format=bmp3 -define bmp3:alpha=true Reserve_6.bmp\n\n\n"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/TFT35/font/readme.md",
"chars": 183,
"preview": "The \"byte_ascii.fon\" is the bitmap fonts of ASCII, size: 12*24\n\nThe \"word_unicode.fon\" is the bitmap fonts of UTF-16, si"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/admin.txt",
"chars": 0,
"preview": ""
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/config.ini",
"chars": 35216,
"preview": "#--------------------------------------------------------------------\n#\n# DEFAULT CONFIG FILE FOR BigTreeTech TFT CONTRO"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0 - STM32/language_cn.ini",
"chars": 9861,
"preview": "#### Language Code:CN\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_am.ini",
"chars": 12137,
"preview": "#### Language Code:AM\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_br.ini",
"chars": 12498,
"preview": "#### Language Code:BR\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_ca.ini",
"chars": 12640,
"preview": "#### Language Code:CA\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_cn.ini",
"chars": 9861,
"preview": "#### Language Code:CN\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_cz.ini",
"chars": 12169,
"preview": "#### Language Code:CZ\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_de.ini",
"chars": 12342,
"preview": "#### Language Code:DE\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_en.ini",
"chars": 12063,
"preview": "#### Language Code:EN\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_es.ini",
"chars": 12333,
"preview": "#### Language Code:ES\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_fr.ini",
"chars": 12749,
"preview": "#### Language Code:FR\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_gr.ini",
"chars": 12855,
"preview": "#### Language Code:GR\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_hu.ini",
"chars": 12540,
"preview": "#### Language Code:HU\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_it.ini",
"chars": 12639,
"preview": "#### Language Code:IT\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_jp.ini",
"chars": 11277,
"preview": "#### Language Code:JP\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_nl.ini",
"chars": 12352,
"preview": "#### Language Code:NL\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_pl.ini",
"chars": 13003,
"preview": "#### Language Code:PL\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_pt.ini",
"chars": 12233,
"preview": "#### Language Code:PT\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_ru.ini",
"chars": 12562,
"preview": "#### Language Code:RU\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_sk.ini",
"chars": 12218,
"preview": "#### Language Code:SK\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_sl.ini",
"chars": 12211,
"preview": "#### Language Code:SL\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_tc.ini",
"chars": 10501,
"preview": "#### Language Code:TC\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_tr.ini",
"chars": 12238,
"preview": "#### Language Code:TR\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/Language Packs/language_uk.ini",
"chars": 12798,
"preview": "#### Language Code:UK\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/TFT35/bmp/readme.md",
"chars": 118,
"preview": "ImageMagick command\n\nconvert Reserve_6.bmp -alpha set -define bmp:format=bmp3 -define bmp3:alpha=true Reserve_6.bmp\n\n\n"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/TFT35/font/readme.md",
"chars": 183,
"preview": "The \"byte_ascii.fon\" is the bitmap fonts of ASCII, size: 12*24\n\nThe \"word_unicode.fon\" is the bitmap fonts of UTF-16, si"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/admin.txt",
"chars": 0,
"preview": ""
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/config.ini",
"chars": 35216,
"preview": "#--------------------------------------------------------------------\n#\n# DEFAULT CONFIG FILE FOR BigTreeTech TFT CONTRO"
},
{
"path": "Firmware/2022-03-27/Screen-2022-03-27/BTT B1 TFT35 V3.0.1 - GD32/language_cn.ini",
"chars": 9861,
"preview": "#### Language Code:CN\n## Language Version:20220325\n## Maximum byte per keyword is 250 Bytes.\n## Escape characters are no"
},
{
"path": "Firmware/README.md",
"chars": 1783,
"preview": "## Version - 2020-08-18\n### Motherboard\nThe latest version: `Marlin 2.0.6 (Jan 25 2021 13:43:58)` --- (Compared with Oct"
},
{
"path": "Firmware/lpc176x_usb_driver.inf",
"chars": 780,
"preview": "[Version]\nSignature=\"$Windows NT$\"\nClass=Ports\nClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}\nProvider=%PROVIDER%\nDriv"
},
{
"path": "README.md",
"chars": 1723,
"preview": "# BIQU-B1\n\n## Firmware\n * the `Firmware` folder contains the .bin file of the precompiled motherboard and touch screen\n"
},
{
"path": "TF card data/English/models/CFFFP_Little Bear.gcode",
"chars": 5619413,
"preview": ";FLAVOR:Marlin\n;TIME:3775\n;Filament used: 2.48947m\n;Layer height: 0.1\n;MINX:101.443\n;MINY:101.176\n;MINZ:0.3\n;MAXX:135.58"
},
{
"path": "TF card data/English/models/CFFFP_Pokémon.gcode",
"chars": 3493965,
"preview": ";FLAVOR:Marlin\n;TIME:2229\n;Filament used: 1.28012m\n;Layer height: 0.1\n;MINX:106.115\n;MINY:100.207\n;MINZ:0.3\n;MAXX:128.88"
}
]
// ... and 18 more files (download for full content)
About this extraction
This page contains the full source code of the bigtreetech/BIQU-B1 GitHub repository, extracted and formatted as plain text for AI agents and large language models (LLMs). The extraction includes 134 files (9.5 MB), approximately 2.5M tokens. Use this with OpenClaw, Claude, ChatGPT, Cursor, Windsurf, or any other AI tool that accepts text input. You can copy the full output to your clipboard or download it as a .txt file.
Extracted by GitExtract — free GitHub repo to text converter for AI. Built by Nikandr Surkov.